Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
METAL SERVICES
SUMMARY
▪ Design and stress analysis of supporting structures, pipe
racks, service platforms, stacks, piping & pressure vessels;
▪ Workshop drawings for steel structures;
▪ Prefabrication: according EN 1090-2, EXC2 and EXC3;
▪ Welding: according EN3834-2;
▪ Metal forming services;
▪ Welding is supervised by IWE
▪ NDT: according EN17635 and EN 1090-2
▪ VT and PT level 2 inspections
▪ Surface treatment: Sa2,5 according EN 8501-1
▪ Painting: according EN12944-2
▪ Logistics
▪ Erection
Additionaly, Nord Steel is operating in accordance with the
following international standards:
▪ ISO 9001:2015
▪ ISO 14001:2015
▪ OHSAS 18007:2007
▪ Production of steel structures up to 300t/month
▪ Assembly and welding area inside up to 4,000m²
▪ Outside territory up to 45,000m²
▪ 3 cranes x 5t
▪ 2 cranes x 12,5t (with possibility to use as single crane with total
lifting capacity of 25t)
▪ Max height inside workshop 6,000mm
▪ Lifting capacity outside is not limited
▪ Gates inside of workshop 5,000 x 5,000mm (4 gates)
▪ No size limitations for entering or leaving the territory
FACTORY CAPACITIES:
CARBON STEEL WORKSHOP
Key info:
▪ Production of stainless steel structures up
to 50t/month
▪ Fabrication area inside up to 2,000m²
▪ Outside territory up to 15,000m²
▪ Separate building and territory for SS
▪ 2 cranes x 5t with possibility to use as
single crane with total lifting capacity of 10t
▪ Max height inside workshop 5,000mm
▪ Lifting capacity outside is not limited
▪ Gates of workshop 4,300 x 3,900mm
▪ Gate size for the territory – 8m width
FACTORY CAPACITIES:
STAINLESS STEEL WORKSHOP
SERVICES
▪ Provided scope of services: design and
stress analysis of supporting structures, tanks,
pipe racks, service platforms, stacks, piping &
pressure vessels (PED / ASTM); workshop
drawings for steel structures, instructions for
erection;
▪ Staff: qualified design and engineering
department, chain of subcontractors;
▪ Product: detail design drawings, 2D / 3D
models,
▪ Industry: cement, waste to energy, pulp &
paper, offshore, cable handling, environmental;
gas & oil, civil, bridge construction, other.
DESIGN
▪ Provided scope of services: preparations of
welding plan and welding maps, assembly, welding
by certified welders, control assurance, NDT;
▪ Geography: services can be provided in workshop
or on site;
▪ Qualification: qualified > 200 procedures for
carbon, boiler, stainless, high nickel alloy steels &
aluminum (S235, S275; S355, P grade steels,
16Mo3, 13CrMo4-5, 254SMO, 304, 316, 253MA,
310S, 5754, 6060, 6082 and other).
▪ Industry: cement, waste to energy, pulp & paper,
offshore, cable handling, gas & oil, civil, bridge,
other;
▪ Staff: 30 certified welders, 40 assemblers;
▪ Supervision: certified welding engineer, IWE;
▪ Fabrication: according to 1090 EXC2 & EXC3;
▪ Welding according to EN 3834-2.
WELDING
Key info (Painting):
▪ Preparation of surface and painting up to 7,000m² CS
structures/month;
▪ Painting shop 800m²;
▪ Shot blasting chamber 5,000x6,000x15,000;
▪ Shot blasting chamber 3,000x4,000x13,000;
▪ 2 cranes x 8t;
▪ Max height inside workshop 5,600mm;
▪ Gates of paint shop 5,500x5,000mm.
PAINTING, PICKLING &
PASSIVATION
Our staff & experience:
▪ We have experienced painters;
▪ We are offering up to C5 coating;
▪ We supply coating services according to offshore
requirements;
▪ Frosio level III inspections can be performed;
▪ Adhesion, holiday tests, coating reports.
Key info (Pickling & Passivation):
▪ We have experienced staff;
▪ Procedures performed according to latest ASTM
standards;
▪ Procedure performed in heated tent;
▪ Procedure supervised, tested by copper sulfate test.
Nord Steel is ready to offer cutting services from
own or client’s material:
▪ Plate plasma 2000x6000mm;
▪ Plate plasma 3000x12000mm;
▪ Profiles cutting saw, 1080x580 mm;
▪ Profiles cutting saw, 400x400 mm.
PLATE & PROFILE CUTTING
Nord Steel is ready to offer bending & plate rolling
services from own or client’s material:
▪ Plate rolling machine BENDMAX. Maximum plate
rolling thickness – 16 mm. Maximum diameter – up to
5 meters;
▪ Plate bending machine ERMAKSAN. Maximum
bending thickness – 12 mm.
BENDING & PLATE ROLLING
ERECTION SERVICES
▪ Provided scope of services: full scope of
mechanical erection and commissioning works.
▪ Staff: our team provides project managers,
procurement team, HSE & QA specialists, assembly
and welding teams, machinery operators for erection
project execution.
▪ Scope: we are capable to erect structural steel,
platforms, technological equipment, piping, stacks,
silos, scrubbers, ducts, boilers, pressurized equipment
or any other steel item.
▪ Geography: services can be provided in European
Union;
▪ Industry: cement, waste to energy, pulp & paper,
offshore, cable handling, gas & oil, civil, bridge, other.
DELIVERY SERVICES
▪ Provided scope of services: all type of heavy
equipment delivery;
▪ Staff: our team is enriched by professional logistics
specialists capable to execute heavy duty delivery
projects.
▪ Scope: air / road / ship deliveries;
▪ Geography: services can be provided globally
NORD STEEL
NORD STEEL
NORD STEEL
PARTNER WITH PASSION FOR STEEL
AND TECHNOLOGIES