merten prize part2

301

ww

w.m

erte

n.de

one insert – lets You Be CreAtiVeuniVersAl Flush-mounted inserts

©2010 |Flush-mounted inserts

The new QuickFlex inserts are every inch the

pioneer: with new and improved functionality, they

make installation a snap – connecting, aligning,

fastening, checking and expanding the inserts is

now quicker, safer and more convenient. This is

achieved by specially-moulded wiring compart-

ments, optimised cable routing, practical plug-in

terminals for fastening, and the low mounting

depth, which permits simple wiring. Components

with several decouplings and rounded edges also

ensure optimum safety during installation.

An added advantage: QuickFlex modules can be

retrofitted and expanded with QuickFix socket-out-

lets and bases such as the LED lighting module,

which can be used to create lighting accents.

ConneCtinG mAde eAsY

• Low mounting depth for greater freedom of movement when wiring

• Plug-in terminals with funnel-shaped cable entry for easy and quick wiring

• Ergonomic: connections are angled at 35°, making installation considerably easier

• Circuit diagram on rear for a safe overview of the wiring

• Easy-to-operate, easy-access release levers

suPer-FAst FAsteninG

• Just three short turns of the quick- fastening screws and the base will sit securely in the box

• 100% safety due to fully-insulated retaining ring

• 100% flush claws for easy and safe installation in cavity wall boxes

• Easy claw-return makes changes to mounting and realignments easier than ever

intelliGent AdditionAl FunCtions CAn Be retroFit-ted Without the need For disAssemBlY WorK

• The bases are pre-equipped for LED lighting modules: simply plug in and you're done

• The red or multicoloured LED lighting module can be used as a control light or as an orientation light

FAst And sAFe AliGnment

• The 1 mm stainless-steel retaining ring is “indestructible” and resistant to bending even on uneven walls

• Its rounded edges make installation even safer

• The zinc-plated surface makes the alignment markings and identifica-tion markings even more visible

• The acclaimed retaining ring interlocking system enables quick and easy alignment and installation of multiple combinations

ConVenient Front-side testinG

• Clear and easily recognisable connection markings

• Test contacts allow convenient testing and measuring from front – without the need for disassembly of switches

Flush-mountedinserts

302

ww

w.m

erte

n.de

Flush-mounted inserts | ConVersion mAde eAsY

Flush-mounted inserts | ©2010

Push-Button| PreVious Flush-mounted inserts sWitCh | neW: QuiCKFlex Flush-mounted inserts

Art. no. Description Description Art. no. Version

311600 Rocker switch inserts, two-way

One-/two-way switch insert, 1-pole MEG5136-0000 10 AX, plug-in terminals

MEG5136-0000 16 AX, plug-in terminals

MEG3516-0000 16 AX, screw/lift terminals

311500 Rocker switch inserts, two-circuit

Two-circuit switch insert, 1-pole MEG3115-0000 10 AX, plug-in terminals



311700 Rocker switch inserts, intermediate

Intermediate switch insert, 1-pole MEG3117-0000 10 AX, plug-in terminals



311601 Rocker switch inserts, double two-way

Double two-way switch insert, 1-pole MEG3126-0000 10 AX, plug-in terminals



325500 Two-circuit control switch insert with N terminal, two-circuit

Two-circuit switch insert with N-terminal, 1-pole

MEG3125-0000 10AX, plug-in terminals

311200 Rocker switch insert, one-way, 2-pole

On/off-switch insert, 2-pole MEG3112-0000 10 AX, plug-in terminals


Two-way switch/two-way push-button insert

MEG3128-0000 10 AX + 10 A, plug-in terminals

325600 Rocker control switch insert, two-way

One-/two-way control switch insert, 1-pole




One-/two-way switch insert, orientation light, 1-pole




325200 Rocker control switch insert, one-way, 2-pole

One-way control switch insert, 2-pole MEG3102-0000 10 AX, plug-in terminals



Two-circuit control switch insert, 1-pole MEG3105-0000 10 AX, plug-in terminals


Two-circuit switch insert with orientation light, 1-pole




Intermediate switch insert with orientation light, 1-pole



QuickFlex, Merten's new switch and

socket-outlet base, enables quick and

simple installation, and can be com-

bined with other functional modules.

The electrician can install the unit in

only three steps, greatly decreasing

installation time. Additional functional-

ity is provided by the QuickFlex mod-

ules; for example, the ambient light for

the socket-outlet base or the orienta-

tion light for the switch base can all be

adjusted.

QuickFlex combined innovative tech-

nology with high-quality processing

and materials, and is easy and eco-

nomical to use – key factors for both

electricians and end-users alike.

The following two tables list the old

flush-mounted inserts and the equiva-

lent new QuickFlex sockets.

The new Merten article numbering

system makes converting to QuickFlex

sockets even easier. The numbering

system makes it easy and convenient

to order Merten products. The article

numbers are comprised of four logical

number blocks: functions, variants,

design, and colour code. In the future,

each number block will be preceded by

the abbreviation MEG.


303

ww

w.m

erte

n.de

ConVersion mAde eAsY | Flush-mounted inserts

©2010 |Flush-mounted inserts

Push-Button| PreVious Flush-mounted inserts Push-Button | neW: QuiCKFlex Flush-mounted inserts

Art. no. Description Description Art. no. Version

315000 Rocker button insert, make contact, 1-pole

Push-button insert, make contact, 1-pole

MEG3150-0000 10 A, plug-in terminals

MEG3050-0000 10 A, screw/lift terminals

Push-button insert with orientation light, make contact, 1-pole



315900 Rocker button insert, make contact, 1-pole, with separate signalling contact

Push-button insert, with separate signalling contact, make contact, 1-pole


315901 Rocker button insert, two-way, 1-pole

Push-button insert with N-terminal, two-way, 1-pole



315902 Double rocker button insert, 2 make contacts

Double push-button insert, 2 make contacts, 1-pole



Double push-button insert, 2 two-way, 1-pole



315903 Double rocker button insert, 1 make contact/ 1 break contact

Double push-button insert, 1 break contact, 1-pole + 1 make contact, 1-pole


Push-button insert with N-terminal, make contact, 1-pole


Double push-button insert, with orientation light, 2 make contacts, 1-pole


315800 Rocker button insert for hotel keycard holder, two-way

Push-button insert for keycard, with separate signalling contact, make contact, 1-pole


Push-button insert for keycard, with separate signalling contact and orientation light, make contact, 1-pole


311501 Roller shutter rocker switch insert, 1-pole

Two-circuit switch insert, 1-pole MEG3715-0000 10 A, plug-in terminals

311502 Roller shutter rocker switch insert with additional contact

Two-circuit switch insert with additional contact, 1-pole


315500 Roller shutter rocker button insert, 1-pole

Roller shutter push-button insert, 1-pole


Pull-cord switch insert, with separate signalling contact, make contact, 1-pole


4367xx 4366xx

Pull-cord two-way switch insert, System M

Pull-cord two-way switch insert, 1-pole MEG3186-0000 10 AX, plug-in terminals

Pull-cord on/off switch insert, 2-pole MEG3182-0000 10 AX, plug-in terminals

396502 Neon lamp attachment with integrated lamp

LED lighting module for switches/ push-button switches

MEG3901-0006 100-230 V, red

LED lighting module for switches/ push-button switches

MEG3921-0000 8-32 V, multicolour


396176 Light attachment for two-circuit control switch

LED lighting module for double switches/push-button switches as control lamp



396276 Light attachment for two-circuit switch

LED lighting module for double switches/push-button switches to aid with orientation



ww

w.m

erte

n.co

m

FLUSH-MOUNTED INSERTS/ACCESSORIESFlush-mounted

inserts

A

304 FLUSH-MOUNTED INSERTS/ACCESSORIES | Switch and push-button inserts | ©2010

Flush-mounted insertsFlush-mounted inserts/accessoriesFlush-mounted insertsUniversal insertsFlush-mounted inserts/accessoriesA

– Technical Information: Flush-mounted inserts

˜ System M switch rockers → 38, System Design switch rockers → 153, OCTOCOLOR switch rockers → 212, AQUADESIGN switch rockers → 237, System Basis switch rockers → 277

– Technical Information: Circuit diagrams for installation of switches and push-buttons

• Surface-mounted visible installation possible in connection with surface-mounted housing.

• Switch inserts with connecting terminals in accordance with VDE 0632.

• Can be illuminated in accordance with German workplace regu-lations.

Switch and push-button inserts

Rocker switch insert 10 A10 AX, AC 250 VWith plug-in terminals.

Version Art. no. PU PG Info

two-way 311600 10/100 1.8 disc.intermediate 311700 10/50 1 disc.one-way, 2-pole 311200 10/50 1 disc.

Rocker double switch insert 10 A10 AX, AC 250 VWith plug-in terminals.

˜ Accessories: Light attachment for two-circuit switch, art. no. 396276.


two-circuit 311500 10/100 1 disc.

Rocker double switch insert 10 A10 AX, AC 250 VWith screw terminals.


double two-way 311601 10/50 1 disc.

Rocker switch insert 16 A16 AX, AC 400 VIlluminated.With screw terminals.

˜ Accessories: Light attachment, art. no. 396376.


one-way, 3-pole with screw terminals

311300 10/50 1

Rocker switch insert 20 A20 A, AC 250 VWith screw terminals.


one-way, 2-pole 311201 10/50 1

Rocker control switch insert 10 A10 AX, AC 250 VCan also be used as a 1-pole, one-way control switch.With plug-in terminals.

— Contents: With neon lamp.


one-way, 2-pole 325200 10/50 1 disc.two-way 325600 10/100 1 disc.

Rocker double control switch insert 10 A with N terminal10 AX, AC 250 VWith plug-in terminals.


two-circuit 325500 10/50 1 disc.

Rocker button insert10 A, 250 V ACWith plug-in terminals.


make contact, 1-pole 315000 10/100 1.8 disc.make contact, 1-pole, with separate signal-ling contact

315900 10/50 1 disc.

two-way, 1-pole 315901 10/50 1 disc.

Rocker double button insert 10 A10 A, 250 V AC2 separate conducting paths.With plug-in terminals.


2 make contacts 315902 10/50 1 disc.1 make contact/1 break contact

315903 10/50 1 disc.

Rocker button insert for hotel key-card holder6 A, 230 V ACWith plug-in terminals.

˜ Accessories: Neon lamp attachment with integrated lamp, art. no. 396502. Plug-in light attachment E 10, art. no. 396576. LED lamp E 10, art. no. 3951... Neon lamp E 10, art. no. 395100.


two-way 315800 10/50 1 disc.

FLUSH-MOUNTED INSERTS/ACCESSORIES

ww

w.m

erte

n.co

m

Flush-mounted inserts

A

©2010 | Rocker switch inserts | FLUSH-MOUNTED INSERTS/ACCESSORIES 305



Rocker switch inserts

Features:• Frontal retrofitting of QuickFlex lighting modules with no dis-

mantling of switches.• Front-attachment measurement and test contacts; accessible

without dismantling switches.• Quick-fastening screws for securing of claws.• Flush-mounted claws with return springs.• High-gloss galvanised retaining ring insulated to the claw.

One-way switch insert 1 poleWith claw and screw fixing.Circuit diagram:

˜ Accessories: LED lighting module for switches/push-buttons 100-230 V, MEG3901-00... LED lighting module for switches/push-buttons 8-32 V, MEG3921-00...


˜ plug-in terminals10 AX, 250 V AC MEG3111-0000 10/60 1

Two-way switch insert 1 poleWith claw and screw fixing.



˜ plug-in terminals10 AX, 250 V AC MEG3116-0000 10/60 1.8 new16 AX, 250 V AC MEG3616-0000 10/60 1 new

˜ screw terminals with lift clamp16 AX, 250 V AC MEG3516-0000 10/60 1 new

L1

2

Two-circuit switch insert 1 poleWith claw and screw fixing.

˜ Accessories: LED lighting module for double switches/push-but-tons as orientation light, MEG3942-0000.


˜ plug-in terminals10 AX, 250 V AC MEG3115-0000 10/60 1 new16 AX, 250 V AC MEG3615-0000 10/60 1 new


Intermediate switch insert 1 poleWith claw and screw fixing.





Double two-way switch insert 1 poleWith claw and screw fixing.




ww

w.m

erte

n.co

m


inserts

A

306 FLUSH-MOUNTED INSERTS/ACCESSORIES | Rocker switch inserts | ©2010

Two-circuit switch insert 1 pole with neutral terminalWith claw and screw fixing.

˜ Accessories: LED lighting module for double switch/push-button as control lamp, MEG3902-0000, MEG3922-0000. LED lighting module for double switches/push-buttons as orientation light, MEG3942-0000.


˜ plug-in terminals10 AX, 250 V AC MEG3125-0000 10/60 1 new

One-way switch insert 2 poleWith claw and screw fixing.




One-way switch insert 3 poleIlluminated.

˜ Accessories: Light attachment, art. no. 396376.


˜ screw terminals16 AX, 400 V AC 311300 10/50 1

Two-way switch and two-way push button insertThe left rocker is designed as a 10 AX, 250 V AC two-way switch and the right rocker is a 10 A, 250 V AC push-button.With claw and screw fixing.


˜ plug-in terminals10 AX/10 A, 250 V AC MEG3128-0000 10/60 1 new

Two-way switch insert 1 pole with indicator lightWith claw and screw fixing.

— Contents: With red 230 V lighting module for switch/push-button.




Two-way switch insert 1 pole with locator lightWith claw and screw fixing.





One-way switch insert 2 pole with indicator lightWith claw and screw fixing.






ww

w.m

erte

n.co

m


A

©2010 | Rocker button inserts | FLUSH-MOUNTED INSERTS/ACCESSORIES 307

Two-circuit switch insert 1 pole with indicator lightWith claw and screw fixing.

— Contents: With red 230 V LED lighting module for double switch/push-button as indicator light.



One-way switch insert 1 pole with separate signalling contactWith claw and screw fixing.Circuit diagram:



˜ plug-in terminals10 AX, 250 V AC MEG3114-0000 10/60 1

Two-circuit switch insert 1 pole with locator lightWith claw and screw fixing.

— Contents: With red 230 V LED lighting module for double switch/key as locator light




Intermediate switch insert 1 pole with locator lightWith claw and screw fixing.




L1

2



One-way switch insert 1 pole with indicator lightWith claw and screw fixing.Circuit diagram:



˜ plug-in terminals10 AX, 250 V AC MEG3101-0000 10/60 116 AX, 250 V AC MEG3601-0000 10/60 1

˜ screw terminals with lift clamp16 AX, 250 V AC MEG3501-0000 10/60 1

Rocker button inserts



without dismantling switches.• Quick-fastening screws for securing of claws.• Flush-mounted claws with return springs.• High-gloss galvanised retainer ring insulated to the claw.

Push-button insert make contact 1 poleWith claw and screw fixing.



˜ plug-in terminals10 A, 250 V AC MEG3150-0000 10/60 1.8 new

˜ screw terminals with lift clamp10 A, 250 V AC MEG3050-0000 10/60 1 new

L1

2

ww

w.m

erte

n.co

m


inserts

A

308 FLUSH-MOUNTED INSERTS/ACCESSORIES | Rocker button inserts | ©2010

Push-button insert make contact 1 pole with separate signalling contactWith claw and screw fixing.



˜ plug-in terminals10 A, 250 V AC MEG3154-0000 10/60 1 new

Push-button insert two-way 1 poleWith claw and screw fixing.





Double push-button insert make contact 1 poleWith claw and screw fixing.

˜ Accessories: LED lighting module for double switches/push-but-tons as orientation light, MEG3942-0000.




Double push-button insert two-way 1 poleWith claw and screw fixing.




Double push-button insert 1 make contact 1 pole + 1 break contact 1 poleWith claw and screw fixing.



Two-way switch and two-way push button insertThe left rocker is designed as a 10 AX, 250 V AC two-way switch and the right rocker is a 10 A, 250 V AC push-button.With claw and screw fixing.


˜ plug-in terminals10 AX/10 A, 250 V AC MEG3128-0000 10/60 1 new

Push-button insert break contact 1 pole with neutral terminalWith claw and screw fixing.





ww

w.m

erte

n.co

m


A

©2010 | Special switch functions | FLUSH-MOUNTED INSERTS/ACCESSORIES 309

Push-button insert make contact 1 pole with locator lightWith claw and screw fixing.





Double push-button insert make contact 1 pole with locator lightWith claw and screw fixing.

— Contents: With red 230 V LED lighting module for double switch/key as locator light



Push-button insert make contact 1 pole for hotel keycard holder with separate signalling contactWith claw and screw fixing.



Push-button insert make contact 1 pole for hotel keycard holder with separate signalling contact and locator lightWith claw and screw fixing.




˜ Time switches (complete items) can be found in the System Basis, System M, System Design or OCTOCOLOR ranges.

Special switch functions



without dismantling switches.• Quick-fastening screws for securing of claws.• Flush-mounted claws with return springs.• High-gloss galvanised retainer ring insulated to the claw.

Pull-cord two-way switch insert 1 poleWith claw and screw fixing.



Pull-cord one-way switch insert 2 poleWith claw and screw fixing.



Pull-cord push-button insert make contact 1 pole with separate sig-nalling contactWith claw and screw fixing.



ww

w.m

erte

n.co

m


inserts

A

310 FLUSH-MOUNTED INSERTS/ACCESSORIES | Special switch functions | ©2010

Time switch insertAC 250 V, 16 A (4 A for motors)Possible deviation of up to + 12 %.

˜ To be completed with: Central plate for time switch insert, 15 min, art. no. System M 5674.., 5390..,5393.., System Basis 5380.., System Design 5383.., OCTOCOLOR 5381... Central plate for time switch insert, 120 min, art. no. System M 5675.., 5392..5394.., System Basis 5382.., System Design 5384.., OCTOCOLOR 5389...

– Technical Information


2-pole, 15 min 538000 1/40 82-pole, 120 min 538200 1/40 8

Three-step rotary switch insert16 A, AC 250 VFor 3-level switching of fans for air conditioning devices, heating systems or extractor hoods.

˜ To be completed with: Central plate for three-step rotary switch, art. no. System M 5672.., 4373..5388.., System Basis 3174.., Sys-tem Design 3169.., OCTOCOLOR 3173...


317400 1/40 8

Fan switch insert10 A, 250 V ACFor switching fans at three different speeds.

˜ To be completed with: Central plate for fan switch, art. no. 3171.., 4371...


317100 1/40 1

Universal switch insert for cylin-der locks10 A, 250 V ACFor standard semi-cylinder locks of 40 mm in length.No zero position!

˜ To be completed with: Central plate for two-way maintained-con-tact switch, art. no. System M 3195.., 3181.., System Basis 3186.., OCTOCOLOR 3346...

– Technical Information— Contents: Without lock.


2-pole 318601 1/50 8

Semi-cylinder lock with key removal in centre positionStandardised quality locking cylinder made by ABUS Pfaffenhain GmbH.On request, can be integrated into new locking system at ABUS Pfaffenhain GmbH.Length: 40 mm.

— Contents: With 3 keys.


MEG3985-0001 1/48 8 new

Semi-cylinder lock with key removal in 3 positionsStandardised quality locking cylinder made by ABUS Pfaffenhain GmbH.On request, can be integrated into new locking system at ABUS Pfaffenhain GmbH.Length: 40 mm.



MEG3985-0003 1/48 8 new


ww

w.m

erte

n.co

m


A

©2010 | Button dimmer | FLUSH-MOUNTED INSERTS/ACCESSORIES 311

˜ System M touch sensor surfaces → 48, System Design touch sen-sor surfaces → 159, OCTOCOLOR touch sensor surfaces → 215,

AQUADESIGN touch sensor surfaces → 238, System Basis touch sensor surfaces → 280

– Technical Information: Dimmer basics; Dimmer and load types; Lamps/dimmer matrix

Button dimmer

• Memory function: When the light is switched on, it has the last set brightness level.

Explanation of symbols:230 V incandescent lamps

230 V halogen lamps

Dimmable, wound transformers

Electronic transformers for phase alignment dimmer

Electric motors

Universal super dimmer insertAC 230 VFor ohmic, inductive and capacitive loads, e.g. incandescent lamps, dimmable wound transform-ers or electronic transformers.Phase control or phase alignmentThe universal dimmer automatically recognises the connected load. Do not connect any mixed loads.With memory function, can be switched off.

Neutral conductor: not required (2 conductor system)

˜ To be completed with: Sensor cover, art. no. System M 5776.., 5701.., 5704.., System Basis 5741.., System Design 5737.., OCTO-COLOR 5742.., AQUADESIGN 5738... TELE sensor cover, art. no. System M 5779.., 5703.., 5711.., System Basis 5748.., System Design 5709.., OCTOCOLOR 5749... In the TRANCENT range with control electronics, 1-gang, art. no. 569090 and TRANCENT glass sensor covers, art. no. 5691.., 5692.., 5693.., 5695... Central plate comfort rotating regulator for Universal super dimmer insert, art. no. System M 5678.., 5677... In the CONNECT radio system with the CONNECT sensor cover for dimmer inserts art. No. System M 5036.., 5026..., System Design 5046...Extension unit operation: With mechanical push-buttons. With extension insert, art. no. 573999, extension TELE insert, art. no. 573998.

– Technical Information— Note: The insert from version 3A only can be used in conjunction

with the CONNECT radio system.


25-420 VA 577099 1/50 8

Universal dimmer insert, 2-gangAC 230 V, 50-60 HzFor ohmic, inductive and capacitive loads, e.g. incandescent lamps, dimmable wound transform-ers and electronic transformers.(Phase control or phase alignment).The universal dimmer automatically recognises the connected load. Do not connect any mixed loads.With memory function, can be switched off.

Neutral conductor:not required (2 conductor sys-tem)Nominal power/per channel: 50-200 W/VA

˜ To be completed with: Push-button module, 2-gang, art. no. Sys-tem M 568499, System Design 568199. Rockers for 2-gang push-button module, art. no. System M 6192.., 6252.., System Design 6262...Extension unit operation: With mechanical push-buttons. With extension insert, art. no. 573999, extension TELE insert, art. no. 573998.



2 x 50-200 VA 568099 1/50 8

Memory super dimmer insert for ohmic loadAC 230 VFor incandescent lamps and 230 V halogen lamps.(Phase control)With memory function, can be switched off.

˜ To be completed with: Sensor cover, art. no. System M 5776.., 5701.., 5704.., System Basis 5741.., System Design 5737.., OCTO-COLOR 5742.., AQUADESIGN 5738... TELE sensor cover, art. no. System M 5779.., 5703.., 5711.., System Basis 5748.., System Design 5709.., OCTOCOLOR 5749... In the TRANCENT range with control electronics, 1-gang, art. no. 569090 and TRANCENT glass sensor covers, art. no. 5691.., 5692.., 5693.., 5695...Extension unit operation: With mechanical push-buttons. With extension insert, art. no. 573999, extension TELE insert, art. no. 573998.



60-400 W 573399 1/60 860-600 W, halogen 500 W

577299 1/60 8

ww

w.m

erte

n.co

m


inserts

A

312 FLUSH-MOUNTED INSERTS/ACCESSORIES | Contact switch | ©2010

Memory halogen super dimmer insert for inductive loadAC 230 VFor dimmable, wound transformers and incan-descent lamps (inductive/ohmic load).(Phase control)With memory function, can be switched off.




20-500 VA 573599 1/60 8

Memory ET super dimmer insert for capacitive loadAC 230 VFor electronic transformers (MET and other brands) and incandescent lamps (ohmic load).(Phase alignment)Noise-free, short-circuit-proof, with overload pro-tection, and soft start function to protect the lamps. With memory function, can be switched off.

˜ To be completed with: Sensor cover, art. no. System M 5776.., 5701.., 5704.., System Basis 5741.., System Design 5737.., OCTO-COLOR 5742.., AQUADESIGN 5738... TELE sensor cover, art. no. System M 5779.., 5703.., 5711.., System Basis 5748.., System Design 5709.., OCTOCOLOR 5749... In the TRANCENT range with control electronics, 1-gang, art. no. 569090 and TRANCENT glass sensor covers, art. no. 5691.., 5692.., 5693.., 5695...Extension unit operation: With mechanical push-buttons. With universal relay insert, art. no. 575897, with preset push-button function.



20-315 W 577899 1/60 8



– Technical Information: Electronic/relay switch

Contact switch

Electronic switch insertAC 230 VFor ohmic load such as incandescent lamps, 230 V halogen lamps.

Switching capacity: 25-400 WNeutral conductor: not required (2 conductor system)

˜ To be completed with: Sensor cover, art. no. System M 5776.., 5701.., 5704.., System Basis 5741.., System Design 5737.., OCTO-COLOR 5742.. or TELE sensor cover, art. no. System M 5779.., 5703.., 5711.., System Basis 5748.., System Design 5709.., OCTO-COLOR 5749... In the TRANCENT range with control electronics, 1-gang, art. no. 569090 and TRANCENT glass sensor covers, art. no. 5691.., 5692.., 5693.., 5695...Extension unit operation: With mechanical push-buttons. With extension insert, art. no. 573999, extension TELE insert, art. no. 573998.

– Technical Information— Note: The electronic switch insert, cannot be used in conjunction



25-400 W 575799 1/50 8

Electronic push-button insertAC 230 VPulse generator for surge switches or protective circuits.The switching function is determined by the surge switch or protective circuit used.

Connected load: 4-100 VASwitching current: 10-500 mAPulse duration: approx. 40 msNeutral conductor: not required (2 conductor system)




4-100 VA 574697 1/60 8


ww

w.m

erte

n.co

m


A

©2010 | Contact switch | FLUSH-MOUNTED INSERTS/ACCESSORIES 313

Relay universal insertAC 230 VFor ohmic, inductive and capacitive loads such as incandescent lamps, energy-saving lamps, LV hal-ogen lighting with conventional transformer, elec-tronic transformers, fluorescent lamps.Neutral conductor required.Functions:• Push-button function: switched on as long as

the push-button is touched, max. 1 minute• Switching function: ON/OFF• Time function: 5 s to 1 h

Connected load: max. 1000 W/VA,500 VA for LV halogen lamps with conventional transformer,max. 140 µF capacitive load




max. 1000 W/VA 575897 1/50 8

Roller shutter/two-circuit insertAC 230 V, 50-60 HzNeutral conductor required.

Switching capacity: AC 230 V, 1000 W/VA for both channels togetherCapacitive load: AC 230 V, max. 140 µFPower consumption: <1 WWire range: max. 2x2.5 mm2

˜ To be completed with: Roller shutter control electronics, art. no. 569092, two-circuit control electronics, art. no. 569091.



1000 VA 576499 1/50 8



˜ To be completed with: ARGUS 180 flush-mounted sensor module, art. no. System M 5755.., 5784.., System Basis 5782.., System Design 5786.., OCTOCOLOR 5753.., AQUADESIGN 5781... ARGUS 180 flush-mounted sensor module with switch, art. no. System M 5728.., 5785.., System Basis 5783.., System Design 5795.., OCTO-COLOR 5756... ARGUS 180/2.20 m flush-mounted sensor module, art. no. System M 5688.., 5687... In the CONNECT radio system with the CONNECT sensor cover for switch inserts art. no. System M 5034.., 5024..., System Design 5044...

– Technical Information— Note: A maximum of two electronic switch inserts may be wired in

parallel. The insert from version 2A only can be used in conjunc-tion with the CONNECT radio system.


40-300 W 576799 1/50 8

Relay switch insertAC 230 VFor ohmic and complex loads such as incandes-cent lamps, fluorescent lamps, energy-saving lamps, LV halogen lighting etc.

Switching capacity: 0-1000 VACapacitive load: max. 140 µFNeutral conductor: required (3 conductor sys-tem)


– Technical Information— Note: Replace the relay switch insert, art. no. 576899.


0-1000 VA 576897 1/50 8

ww

w.m

erte

n.co

m


inserts

A

314 FLUSH-MOUNTED INSERTS/ACCESSORIES | Extension inserts | ©2010



– Technical Information: Electronic sensor switch

Extension inserts

Extension insertFor memory super, halogen super and TELE dim-mer, electronic push-button, time switch, relay switch and MET transformers.The extension unit cannot be controlled remotely.Operated as with main unit.

˜ To be completed with: Sensor cover, art. no. System M 5776.., 5701.., 5704.., System Basis 5741.., System Design 5737.., OCTO-COLOR 5742.., AQUADESIGN 5738...



573999 1/60 8

Extension TELE insertFor memory super, halogen super and TELE dim-mer, electronic push-button, time switch, relay switch and MET transformers.Neutral conductor required.Can be remote controlled.Operated as with main unit.

˜ To be completed with: TELE sensor cover, art. no. System M 5779.., 5703.., 5711.., System Basis 5748.., System Design 5709.., OCTOCOLOR 5749... In the TRANCENT range with control electronics, 1-gang, art. no. 569090 and TRANCENT glass sensor covers, art. no. 5691.., 5692.., 5693.., 5695...



573998 1/60 8

˜ System M rotary dimmer cover → 51, System Design rotary dim-mer cover → 162, OCTOCOLOR rotary dimmer cover → 215, Sys-tem Basis rotary dimmer cover → 281


Rotary dimmers

• Surface-mounted visible installation possible in conjunction with surface-mounted housing.

• The following applies for all types of dimmers: If the dimmers cannot dissipate sufficient heat (cavity walls, multiple combina-tions, surface-mounted combinations and built-in dimmers on DIN rails), the connected loads specified may not be exploited to the maximum.

Explanation of symbols:230 V incandescent lamps

230 V halogen lamps



Electric motors

Universal rotary dimmer insertAC 230 V, 50 HzFor ohmic, inductive and capacitive loads, e.g. incandescent lamps, dimmable wound transform-ers or electronic transformers.Phase control or phase alignmentThe universal dimmer automatically recognises the connected load. Do not connect any mixed loads.With pressure-operated two-way switch.

˜ To be completed with: Central plate with rotary knob, MEG5250-03../-04../-06.. System M, MEG5250-40../-41../-41.. System Design. Central plate for rotary dimmer inserts up to 600 VA, 5726.. OCTOCOLOR.


20-420 W/VA MEG5138-0000 1/72 8 new20-600 W/VA MEG5139-0000 1/72 8 new

Rotary dimmer insert for ohmic load with pressure-operated on/off switchAC 230 V, 50 HzFor incandescent lamps and 230 V halogen lamps.(Phase control).With pressure-operated on/off switch.




40-400 W MEG5131-0000 1/72 8 new


ww

w.m

erte

n.co

m


A

©2010 | Rotary dimmers | FLUSH-MOUNTED INSERTS/ACCESSORIES 315

Dimmer insert for ohmic loadAC 230 VFor incandescent lamps and 230 V halogen lamps.With pressure-operated one-way switch.(Phase control).

˜ To be completed with: Central plate for rotary dimmer inserts, art. no. System M 5670.., 5699..,5399.., System Basis 5723.., System Design 5720.., OCTOCOLOR 5726...



60-400 W 572199 1/50 8.5 disc.

Rotary dimmer insert for ohmic load with pressure-operated two-way switchAC 230 V, 50 HzFor incandescent lamps and 230 V halogen lamps.(Phase control).With pressure-operated two-way switch.




40-400 W MEG5132-0000 1/72 8 new

Dimmer insert for ohmic loadAC 230 VFor incandescent lamps and 230 V halogen lamps.With pressure-operated two-way switch.(Phase control).




60-400 W 572499 1/72 8 disc.60-600 W, halogen 500 W

572299 1/72 8.5 disc.

Rotary dimmer insert for inductive loadAC 230 V, 50 HzFor dimmable, wound transformers, incandes-cent lamps and 230 V halogen lamps (inductive/ohmic load).(Phase control).With pressure-operated two-way switch.




40-600 W/VA MEG5133-0000 1/72 8 new

Rotary dimmer insert for inductive loadAC 230 V, 50 HzFor dimmable, wound transformers, incandes-cent lamps and 230 V halogen lamps (inductive/ohmic load).(Phase control).With pressure-operated on/off switch.

Nominal power: 60-1000 VAMotor load: 60-600 VANeutral conductor:required




60-1000 VA MEG5135-0000 1/72 8 new

Dimmer insert 900 W for ohmic loadAC 230 VFor incandescent lamps and 230 V halogen lamps.With pressure-operated two-way switch.(Phase control).

˜ To be completed with: Central plate for rotary dimmer inserts up to 1000 VA, art. no. System Design 5717.., OCTOCOLOR 5715...

– Technical Information— Note: Not to be combined with System Basis or System M.


75-900 W/halogen 700 W

572799 1/30 8 disc.

ww

w.m

erte

n.co

m


inserts

A

316 FLUSH-MOUNTED INSERTS/ACCESSORIES | Rotary dimmers | ©2010

LV halogen dimmer insert for inductive loadAC 230 VFor dimmable, wound transformers and incan-descent lamps (inductive/ohmic load).With pressure-operated two-way switch.(Phase control).




20-500 VA 572599 1/72 8.5 disc.

Rotary dimmer insert for capaci-tive loadAC 230 V, 50 HzFor electronic transformers and incandescent lamps (ohmic load).(Phase alignment).With pressure-operated two-way switch.Noise-free, short-circuit-proof, with overload pro-tection, and soft start function to protect the lamps.


– Technical Information— Note: Suitable for Merten MET transformers.


20-315 W MEG5136-0000 1/72 8 new20-630 W MEG5137-0000 1/72 8 new

ET dimmer insert for capacitive loadAC 230 VFor electronic transformers (MET and other brands) and incandescent lamps (ohmic load).With pressure-operated two-way switch.(Phase alignment)Noise-free, short-circuit-proof, with overload pro-tection, and soft start function to protect the lamps.




20-315 W 577199 1/50 8.5 disc.

Electronic potentiometer insert 1-10 VAC 230 V, 50 HzFor fluorescent lamps with electronic ballast or electronic transformer with 1-10 V interface.With pressure-operated on/off switch 1.7 A.




MEG5142-0000 1/72 8 new

Electronic potentiometer insert 1-10 VFor fluorescent lamps with electronic ballast or electronic transformer with 1-10 V interface.With pressure-operated one-way switch 5 A.




572999 1/50 8 disc.

Dimmer insert for inductive loadAC 230 VFor dimmable wound transformers, motors, incandescent lamps and fluorescent lamps (inductive/ohmic load).With pressure-operated two-way switch and addi-tional switch contact.(Phase control).In conjunction with the base load of the speed controller, this can be used as a dimmer for argon fluorescent lamps (Ø 38 mm) and as a dimmer in circuits with automatic mains disconnection.

Connected load: 600 W incandescent lamps, 500 W halogen lamps, 500 VA dimmable, wound transformers

˜ To be completed with: Central plate for rotary dimmer inserts, art. no. System M 5670.., 5699..,5399.., System Basis 5723.., System Design 5720.., OCTOCOLOR 5726...Accessories: Base load, art. no. 542894.



25-600 VA 573299 1/50 8 disc.

Base loadConsists of 4 x 6 watt resistors.1 set required per dimmer and per power booster in parallel connection (can be replaced by a 25 watt incandescent lamp).


542894 1/48 8 disc.


ww

w.m

erte

n.co

m


A

©2010 | Roller shutter switch inserts | FLUSH-MOUNTED INSERTS/ACCESSORIES 317

˜ System M roller shutter cover → 52, System Design roller shutter cover → 162, OCTOCOLOR roller shutter cover → 215, AQUADE-SIGN roller shutter cover → 238, System Basis roller shutter cover → 281

– Technical Information: Roller shutter switch and push-button

Speed control insertAC 230 V, 50-60 Hz, max. 2.7 AFor stepless speed control of single-phase motors such as induction motors, split-pole motors and universal motors. With separate switching outlet for controlling slats or to switch ohmic loads.With short-circuit protection.

˜ To be completed with: Central plate for speed controller, art. no. System M 5676.., 5696.., 5398.., System Basis 5836...

— Note: Replaces speed controller insert, art. no. 573699.


583699 1/50 8

Roller shutter switch inserts



without dismantling switches.• Quick-fastening screws for securing of claws.• Flush-mounted claws with return springs.• High-gloss galvanised retaining ring insulated to the claw.

Roller shutter switch insert 1 poleWith mechanical reverse lock-out and electrical interlock.With claw and screw fixing.



Roller shutter rocker switch insert10 A, 250 V ACWith mechanical reverse lock-out and electrical interlock.

˜ To be completed with: Rocker for roller shutter switches and push-buttons, art. no. System M 4324.., 4355.., 4344.., System Basis 3155.., System Design 4115.., OCTOCOLOR 3315...


1-pole 311501 10/50 1 disc.

Down L

Up

Roller shutter switch insert with additional contact 1 poleWith mechanical reverse lock-out and electrical interlock.With claw and screw fixing.

— Note: With an additional contact for switching off the bell function in connection with MEG5209-03../5876.. and 587092, when the "Please do not disturb / Make up room" application is used.



Roller shutter rocker switch insert with additional contact10 A, 250 V ACWith mechanical reverse lock-out and electrical interlock.

˜ Accessories: Light attachment for multi switch art. no. 396176.— Note: With an additional contact for switching off the bell function

in connection with MEG5209-03../5876.. and 587092, when the "Please do not disturb / Make up room" application is used.


311502 10/50 1 disc.

Roller shutter push-button insert 1 poleWith mechanical reverse lock-out and electrical interlock.With claw and screw fixing.




Roller shutter rocker button insert10 A, 250 V ACWith mechanical reverse lock-out and electrical interlock.



1-pole 315500 10/50 1 disc.

Down L

Up1

Down L

Up

ww

w.m

erte

n.co

m


inserts

A

318 FLUSH-MOUNTED INSERTS/ACCESSORIES | Blind control system | ©2010

Roller shutter/two-circuit insertAC 230 V, 50-60 HzNeutral conductor required.

Switching capacity: AC 230 V, 1000 W/VA for both channels togetherCapacitive load: AC 230 V, max. 140 µFPower consumption: <1 WWire range: max. 2x2.5 mm2

˜ To be completed with: Roller shutter control electronics, art. no. 569092, two-circuit control electronics, art. no. 569091.



1000 VA 576499 1/50 8

Momentary/maintained-contact switch insert for roller shutters10 A, 250 V ACCan be used as push-button with the locking disc provided.Operated via a rotary knob.

˜ To be completed with: Central plate for momentary/maintained-contact switch insert for roller shutters, art. no. System M 5671.., 5698.., 5387.., System Basis 3172.., System Design 3192.., OCTO-COLOR 3170...


2-pole 317200 1/40 1

Momentary/maintained-contact switch insert for roller shutters for cylinder locks10 A, 250 V ACFor standard semi-cylinder locks of 40 mm in length.

˜ To be completed with: Central plate for momentary/maintained-contact switch inserts for roller shutters, art. no. System M 3194.., 3193.., System Basis 3185.., OCTOCOLOR 3349.., AQUADESIGN 3482...

— Contents: Without lock.


2-pole 318501 1/50 8

Roller shutter push-button insert for cylinder locks10 A, 250 V ACFor standard semi-cylinder locks of 40 mm in length.

˜ To be completed with: Central plate for momentary/maintained-contact switch inserts for roller shutters, art. no. System M 3194.., 3193.., System Basis 3185.., OCTOCOLOR 3349.., AQUADESIGN 3482...

— Contents: Without lock.


2-pole 318901 1/50 8

˜ System M blind control system → 53, System Design blind control system → 163, OCTOCOLOR blind control system → 216, System Basis blind control system → 281

Semi-cylinder lock with key removal in centre positionStandardised quality locking cylinder made by ABUS Pfaffenhain GmbH.On request, can be integrated into new locking system at ABUS Pfaffenhain GmbH.Length: 40 mm.



MEG3985-0001 1/48 8 new

Semi-cylinder lock with key removal in 3 positionsStandardised quality locking cylinder made by ABUS Pfaffenhain GmbH.On request, can be integrated into new locking system at ABUS Pfaffenhain GmbH.Length: 40 mm.



MEG3985-0003 1/48 8 new

Blind control system

Standard blind control insertAC 230 V, 50 HzFor local control of a blind/roller shutter motor with limit switch. Motor protection through interlocked relay con-tacts. Without extension input.

Nominal voltage: AC 230 V, 50 HzNeutral conductor:requiredSwitching capacity: max. 1 motor 1000 VAOutputs: 2 make contacts (interlocked)Pulse duration: 2 minutesConnecting terminals: Screw terminals for max. 2.5 mm2 or 2x1.5 mm2

˜ To be completed with: Blind push-buttons and blind time switches for the blind control system. In the CONNECT radio system with the CONNECT radio roller shutter push-button with sensor connection art. No. System M 5035.., 5025..., System Design 5045...



1000 VA 580698 1/50 8


ww

w.m

erte

n.co

m


A

©2010 | Room temperature control inserts | FLUSH-MOUNTED INSERTS/ACCESSORIES 319

Blind control insert with exten-sion inputAC 230 V, 50 HzFor controlling a blind/roller shutter motor with limit switch. A mechanical roller shutter switch/push-button or an additional blind control insert can be con-nected via the extension input to implement group/central control. Wind alarm function possi-ble with extension input. Motor protection through interlocked relay contacts.

Nominal voltage: AC 230 V, 50 HzNeutral conductor: requiredSwitching capacity: max. 1 motor 1000 VAOutputs: 2 make contacts (interlocked)Reversing time: minimum 500 msConnecting terminals: Screw terminals for max. 2.5 mm2 or 2x1.5 mm2

˜ To be completed with: Blind push-buttons and blind time switches for the blind control system. In the CONNECT radio system with the CONNECT radio roller shutter push-button with sensor connection art. No. System M 5035.., 5025..., System Design 5045...Accessories: Wind sensor interface, art. no. 580693.

– Technical Information— Note: In combination with the standard blind time switch, art. no.

5809.., 5859.., 5839.., 5819.., the extension input does not work.


1000 VA 580699 1/50 8

Multiple control relay insert for roller shutters5 A, AC 250 VSuitable for a size 60 flush-mounted box.With a multiple control relay, it is possible to con-trol 2 motors locally by manual operation or cen-trally.The multiple control relays can be cascaded.

˜ To be completed with: Blanking cover, art. no. System M 3916.., 3918.., 3917.., System Basis 3920.., System Design 3919.., OCTO-COLOR 3926...



576399 1/24 8

˜ System M room thermostat cover → 56, System Design room thermostat cover → 166, OCTOCOLOR room thermostat cover → 218, System Basis room thermostat cover → 283

– Technical Information: Heating control

Multiple control relay for roller shutters, flush-mounted6 A, AC 250 VSuitable for a size 60 flush-mounted box. Flat 22 mm design. For local control using push-buttons, installation in a deep flush-mounted box.For controlling up to 2 roller shutter motors locally, in groups or centrally. With separation of load and control circuit, as well as forced locking in both directions of movement. Motors are controlled individually using a roller shutter rocker switch and centrally using the blind time switches or blind push-buttons of the Merten blind control system.

Mains voltage: AC 230 V, 50 Hz ±10 %Control voltage: AC 230 V ±10 %Power consumption: 10 mA in relay operationSwitching voltage: max. AC 250 VSwitching current: max. 6 ATemperature range: 0 -60 °CTerminals: max. 1.5 mm2

Dimensions: 22x49x52 mm (HxWxD)Installation: (deep) flush-mounted box




576398 1/100 8

Room temperature control inserts

Room temperature control insert with switchWith thermal recirculation.Fourth terminal for night economy.

Heating nominal current: 10 (4) A

˜ To be completed with: Central plate for room temperature control unit with switch, art. no. System M 5348.., 5361.., System Basis 5385.., System Design 5397.., OCTOCOLOR 5391...

— Contents: Room temperature control insert, protective cover for plaster and screws.


AC 230 V 536302 1/50 8.5AC 24 V 536304 1/50 8

ww

w.m

erte

n.co

m


inserts

A

320 FLUSH-MOUNTED INSERTS/ACCESSORIES | Power boosters | ©2010

– Technical Information: Dimmer basics

Room temperature control insert with changeover contactFor electric underfloor heating if the additional heater has to be interlocked, air conditioning (cooling), valve drives (de-energised open or closed).With thermal recirculation.

Heating nominal current: 10 (4) ACooling nominal current: 5 (2) A

˜ To be completed with: Central plate for room temperature control unit with changeover contact, art. no. System M 5347.., 5362.., System Basis 5365.., System Design 5374.., OCTOCOLOR 5364...

— Contents: Room temperature control insert, protective cover for plaster and screws.


AC 230 V 536400 1/50 8AC 24 V 536401 1/50 8

Floor thermostat insert with switchWith remote sensor on 4 m incoming lead, extendable with twin-core cable.

˜ To be completed with: Central plate for floor thermostat insert with switch, art. no. System M 5349.., 5358.., System Basis 5371.., System Design 5375.., OCTOCOLOR 5372...

— Contents: Room temperature control insert, remote sensor, pro-tective cover for plaster and screws.


AC 230 V, 10(4) A 537100 1/12 8

Power boosters

Power boosterAC 230 VFor power extension of memory super dimmers, TELE dimmers, incandescent and fluorescent lamp dimmers.The load must be evenly distributed across dim-mers and power boosters.(Phase control).

˜ To be completed with: Blanking cover, art. no. System M 3916.., 3918.., 3917.., System Basis 3920.., System Design 3919.., OCTO-COLOR 3926... Blanking cover AQUADESIGN, art. no. 3483...



25-600 VA 574099 1/60 8

ET power booster for capacitive loadAC 230 VFor power extension of ET dimmers (art. no. 577199) or ET super dimmers (art. no. 577899).The load must be evenly distributed across the ET dimmer and the ET power booster.(Phase alignment).




20-315 W 577399 1/60 8

Remote controls

IR remote control Distance 201010 channel IR remote control. For the control of all TELE sensor covers, blind push-buttons with IR receiver, presence detectors with IR receivers and KNX devices with IR receivers.

Battery: 2 microcells (IEC LR 03, AAA)Range: up to 20 m

˜ Receiver: TELE sensor cover, art. no. System M 5779.., 5703.., 5711.., System Basis 5748.., System Design 5709.., OCTOCOLOR 5749... Blind push-button with IR receiver and sensor connection, art. no. System M 5880.., 5864.., System Basis 5804..,System Design 5844.., OCTOCOLOR 5824... ARGUS Presence with IR receiver, art. no. 550591, 6309... Push-button, 4-gang plus with IR receiver, art. no. System M 6175.., 6279...

— Contents: Without battery.


black 570222 1/48 8


ww

w.m

erte

n.co

m


A

©2010 | Communications inserts and accessories | FLUSH-MOUNTED INSERTS/ACCESSORIES 321

CONNECT radio universal remote controlRadio remote control and IR remote control in a single device. For activating:• Devices of the Merten CONNECT radio system• Merten IR devices• Up to five IR AV devices such as TV, DVD,

DVDR, VCR, SAT, cable, AMP and DMRIn connection with the CONNECT radio system, several rooms can be set up with radio compo-nents using the remote control. Each room can be configured with up to 9 groups with maximum 12 devices and 3 scenes with maximum 12 devices. Radio features: System administrator, transmit-ter

Functions:EASY CONNECT:• Switch on, switch off, toggle, dim, raise/lower

roller shutters, scene• Programming in EASY CONNECT as a system

administrator• Individual programming of CONNECT radio

push-buttons• Individual description of rooms and groups• Display of description in LCD displayWith CONNECT radio configuration tool:• additionally graphic programming of the EASY

CONNECT functionsExtended functions for IR/AV:• Trigger Philips Ambilight• Supports more than 1,000 manufacturers.

Devices are selected from a list or by entering programming codes.

• General use of the functions of a device (e.g. volume) in all modes.

Radio range: up to 100 m in free field, up to 30 m indoorsIR range: up to 15 mBattery: 3 microcells (IEC LR 03, AAA)Display element: LCD display with 10 characters

˜ Receiver: All receivers of the Merten CONNECT radio system.— Note: The device can assume the properties of a system adminis-

trator. The remote control must be used as the system administra-tor in connection with the EASY CONNECT method. In connection with the CONNECT radio configurator, it can be used as required.Contents: With battery.With a codes table for nearly all conven-tional devices, like TV, VCR, DVD, SAT, AUX, ...


Aluminium/black 506923 1/6 8

Communications inserts and accessories

Telephone socket-outlet TAE, 1-gangFor the German market.For connecting an analogue telephone.With screw terminals.1×6 F: 1 telephone

˜ To be completed with: Central plate for telephone socket-outlet TAE, art. no. System M 2960.., 2979.., System Basis 2928.., Sys-tem Design 2978.., OCTOCOLOR 2938...


1x6 F, white 465206 10/50 1

Telephone socket-outlet TAE, 3-gangFor the German market.For connecting analogue telephones/ancillary units.With screw terminals.2×6/6 NF/F: 2 telephones, 1 ancillary unit3×6 NFN: 1 telephone, 2 ancillary unit



2×6/6 NF/F, white 465226 10/50 13x6 NFN, white 465236 10/50 1

Telephone socket-outlet TDO 3x10For the Austrian market.For connecting analogue terminal units.

˜ To be completed with: Central plate for telephone socket-outlet TAE, art. no. System M 2960.., 2979.., System Basis 2928.., Sys-tem Design 2978.., OCTOCOLOR 2938... Intermediate ring for com-bination inserts in line with DIN 49075, art. no. System M 5185.., 5181.., System Basis 5171.., System Design 5160.., OCTOCOLOR 5168... Intermediate ring with hinged lid for combination inserts in line with DIN 49075, art. no. System M 5186.., 5182.., System Basis 5174...

— Can only be ordered via Merten in Vienna.


white 465930 1/1 1

Combination socket-outlet RJ45/TAE (Cat 3)For connecting a telephone and an analogue or digital terminal unit via the 8-pole RJ45 connec-tor.With screw terminals.




8(6)-6F+N, white 465707 1/60 1

ww

w.m

erte

n.co

m


inserts

A

322 FLUSH-MOUNTED INSERTS/ACCESSORIES | Communications inserts and accessories | ©2010

Line 21 Combination socket-out-let RJ45/TAEWith integrated Line 21 technology.For connecting an analogue telephone/telecom-munications system (TAE) and a digital network device (RJ45, 8-pole) such as PC, HUB, router, Merten switch (art. no. 465711) or IC 1 (art. no. 6950.., 6951...)With 4 screw terminals for the installation line and 2 for the connection of additional telephone socket-outlets.

Cable length: max. 50 mTransmission rate: max. 100 Mbit/s




8(6)-6F+N 465709 1/60 1

RJ45 insert 8For connecting analogue or digital terminals using an 8-pole RJ45 socket.With screw terminals.

˜ To be completed with: Central plate for RJ45 insert, 1-gang, art. no. System M 2962.., 2983.., System Basis 2917.., System Design 2918...


465720 10/50 1

RJ45 insert 8 Cat 5eFor connecting analogue or digital terminals using an 8-pole RJ45 socket.Connection via LSA terminals.



465721 1/50 1

RJ45 insert 8/8For connecting analogue or digital terminal units via two 8-pole RJ45 connectors.With screw terminals.

˜ To be completed with: Central plate for RJ45 insert, 2-gang, art. no. System M 2961.., 2980.., System Basis 2927.., System Design 2926.., or OCTOCOLOR 2920...



white 465701 10/40 1

Line 21 RJ45 insert 8/8With integrated Line 21 technology.For connecting an analogue telephone/telecom-munications system (RJ45, 8-pole) and a digital network device (RJ45, 8-pole) such as PC, HUB, router, Merten switch (art. no. 465711) or IC 1 (art. no. 6950.., 6951...)With 4 screw terminals for the installation line and 2 for analogue telephony.





465708 1/60 1

RJ45 insert 2x8For connecting analogue or digital terminal units via two 8-pole RJ45 connectors connected in par-allel with bus-type cabling.With screw terminals.




white 465702 10/40 1

RJ45 insert 8/8 Cat 5eFor connecting analogue or digital terminal units via two 8-pole RJ45 connectors.Connection via LSA terminals.



white 465703 1/50 1

RJ45 insert 8/8 Cat 6For connecting analogue or digital terminal units via two 8-pole RJ45 connectors.Connection via LSA terminals.



white 465706 1/50 1


ww

w.m

erte

n.co

m


A

©2010 | Communications inserts and accessories | FLUSH-MOUNTED INSERTS/ACCESSORIES 323

Telephone connector VDo 4For central plate with cable outlet for telephone connector VDo 4.

˜ To be completed with: Central plate with cable outlet for tele-phone connector VDo, art. no. System M 2968.., 2955.., System Basis 3925.., OCTOCOLOR 3927...


4-pole, white 465304 10/40 1

Telephone socket-outlet ADo 4For connecting analogue terminal units.

˜ To be completed with: Central plate for telephone socket-outlet ADo, art. no. System Basis 2930.., OCTOCOLOR 2937...Accessories: Telephone socket-outlet ADo S 4, art. no. 465404.


4-pole, white 465104 10/40 1

Telephone socket-outlet ADo 8CodeableFor connecting analogue terminal units.

˜ To be completed with: Central plate for telephone socket-outlet ADo, art. no. System Basis 2930.., OCTOCOLOR 2937...Accessories: Telephone socket-outlet ADo S 8, art. no. 465408.

— Contents: A setting knob for coding is included in every pack of 10.


8-pole, white 465108 10/40 1

Telephone plug ADo S 4For telephone socket-outlet ADo.

˜ To be completed with: Telephone socket-outlet ADo 4, art. no. 465104.


4-pole, white 465404 5/150 1

Telephone plug ADo S 8For telephone socket-outlet ADo.

˜ To be completed with: Telephone socket-outlet ADo 8, art. no. 465108.


8-pole, white 465408 5/250 1

Modular jack connector, Cat 3WE Western type.In line with US FCC 86, Cat 3.Connection with IDC clamping method.

Pin configuration Telecom/ISDN modular jack/8-pole: 1a/4, 1b/5, 2a/3, 2b/6.

˜ To be completed with: Supporting plate for modular jack connec-tor, art. no. 461590. Insert for modular jack connector, art. no. System M 464398, System Basis 461398, System Design 464398, OCTOCOLOR 463398. Central plate for modular jack con-nector, art. no. System M 2901.., 2957.., System Basis 2929...


6-pole RJ 11/ Cat. 3, black

465516 5/250 1


465518 5/250 1

Modular jack connector, Cat 5WE Western type.In line with US FCC 86, Cat 5.Connection via LSA terminals.

˜ To be completed with: Supporting plate for modular jack connec-tor, art. no. 461593. Insert for modular jack connector, art. no. System M 464399, System Basis 461399, System Design 464399, OCTOCOLOR 463399.



465595 5/120 1

D-type socket connector, 9-poleSolder connection max. 0.6 mm2.

˜ To be completed with: Central plate for D-type subminiature con-nector, 9-pole, art. no. System M 4676.., 4681.., System Basis 4601... Insert for D-type subminiature connector, 9-pole, art. no. System M 464391, System Basis 461391, System Design 464391, OCTOCOLOR 463391.

— Contents: With locking pin for M3 screw.


9-pole 465009 5/500 1


˜ To be completed with: Central plate for D-type subminiature con-nector, 15-pole, art. no. System M 4677.., ,4682.., System Basis 4602... Insert for D-type subminiature connector, 15-pole, art. no. System M 464392, System Basis 461392, System Design 464392, OCTOCOLOR 463392.



15-pole 465015 5/500 1


˜ To be completed with: Central plate for D-type subminiature con-nector, 25-pole, art. no. System M 4678.., 4683.., System Basis 4603... Insert for D-type subminiature connector, 25-pole, art. no. System M 464393, System Basis 461393, System Design 464393, OCTOCOLOR 463393.



25-pole 465025 5/500 1

ww

w.m

erte

n.co

m


inserts

A

324 FLUSH-MOUNTED INSERTS/ACCESSORIES | TV/audio | ©2010

BNC connector Ø 12.5 mmCrimp connection up to Ø 6 mm.

˜ To be completed with: Central plate for BNC/TNC socket, art. no. System M 4691.., 4685.., 4686.., System Basis 4605... Insert for BNC/TNC sockets, art. no. System M 464395, System Basis 461395, System Design 464395, OCTOCOLOR 463395.


465010 5/500 1

Reichle & De-Massari connection module, unshieldedConnection with ICD clamping method (no equip-ment necessary).

˜ To be completed with: Insert for Reichle & De-Massari, art. no. 464384.Accessories: Reichle & De-Massari splash flange, art. no. 465591. Reichle & De-Massari splash sleeve, art. no. 465590.


Cat 5e, 1xRJ45/u 465580 2/100 1Cat 6, 1xRJ45/u 465582 2/100 1

Reichle & De-Massari connection module, shieldedConnection with ICD clamping method (no equip-ment necessary).



Cat 5e, 1xRJ45/s 465581 2/100 1Cat 6, 1xRJ45/s 465583 2/100 1

Reichle & De-Massari splash flangeIn the AQUADESIGN switch range, protection type IP 44 is achieved for all Reichle & De Massari modules with the splash flange.

˜ To be completed with: Insert for Reichle & De-Massari, art. no. 464384. Reichle & De-Massari splash sleeve, art. no. 465590.

— Contents: 1 PU = 10 pieces.


blue 465591 1/60 1

Reichle & De-Massari splash sleeveThe splash sleeve is pulled over the connecting cable. In conjunction with the splash flange, pro-tection type IP 44 is also achieved with plug-in connecting cable.

˜ To be completed with: Reichle & De-Massari splash flange, art. no. 465591.

— Note: Splash installation tool (three-prong pliers) can be ordered directly from Reichle & De-Massari.


transparent 465590 10/600 1

TV/audio

Broadband cable/satellite through-way box, 2-gangDIN EN 50083-1/A1, DIN EN 80083-2/A1Broadband directional coupler box for loop-through systems in broadband cable, communal aerial and satellite distribution systems.Suitable for flush-mounted boxes of Ø 55-65 mm.With claw and screw fixing.

˜ To be completed with: Central plate for antenna socket-outlet, art. no. System M 2967.., 2975.., System Basis 2948.., System Design 2941.., OCTOCOLOR 2943...


466098 1/54 1

Broadband cable/satellite antenna branch-circuit box, 2-gangDIN EN 50083-1/A1, DIN EN 80083-2/A1Broadband directional coupler box for branch-cir-cuit and star-type distribution systems in broad-band cable, communal aerial and satellite distribution systems. With DC transmission via the TV connection. Suitable for flush-mounted boxes of Ø 55-65 mm.With claw and screw fixing.DC transmission: max. 24 V/400 mASignal: 22 kHz and DiSEqC



466099 1/54 1

Satellite antenna socket-outlet, 3-gangDIN EN 50083-1/A1, DIN EN 80083-2/A1Single satellite socket-outlet, 3-gang. For individ-ual branch-circuit and star-type distribution sys-tems in communal aerial and satellite distribution systems. With DC transmission via the satellite connection. Suitable for flush-mounted boxes of Ø 55-65 mm.With claw and screw fixing.DC transmission: max. 24 V/320 mASignal: 22 kHz and DiSEqC



466097 1/54 1


ww

w.m

erte

n.co

m


A

©2010 | Accessories for universal inserts | FLUSH-MOUNTED INSERTS/ACCESSORIES 325

Loudspeaker connection insert, 1-gangThe poles are labelled in different colours.Conductor cross-section up to max. 10 mm2.With quick plug-in terminals. With screw termi-nals on the back.



polar white 466919 10/50 1anthracite 466914 10/50 1

Loudspeaker connection insert, 2-gangThe poles are labelled in different colours.Conductor cross-section up to max. 10 mm2.With quick plug-in terminals. With screw termi-nals on the back.



polar white 467019 10/50 1anthracite 467014 10/50 1

Accessories for universal inserts

LED lighting module for switches/push-buttonsPower consumption 0.65 mAFor all 1 and 2-pole switch inserts from Quick-Flex.Red LED.For use as control light or orientation light. The module can be replaced from the front without any dismantling of switches.

— Contents: With LED.


100-230 V, red MEG3901-0006 1/150 1 new

LED lighting module for switches/push-buttonsPower consumption 0.65 mAFor all 1 and 2-pole switch inserts from Quick-Flex.The colours red, blue and green can be set on the RGB LEDs via three switches. Combinations of colours are also possible.For use as control light or orientation light. The module can be replaced from the front without any dismantling of switches.

— Contents: With RGB LED.


100-230 V, multicol-oured

MEG3901-0000 1/150 1 new

8-32 V, multicoloured MEG3921-0000 1/150 1 new

LED lighting module for double switches/push-buttons as orien-tation lightPower consumption 2x0.65 mAFor all two-circuit switch/push-button inserts or double switch/push-button inserts from Quick-Flex. The colours red, blue and green can each be set on the RGB LEDs via three switches. Combina-tions of colours are also possible.For use as orientation light. The module can be replaced from the front without any dismantling of switches.

— Contents: With two RGB LEDs.



MEG3942-0000 1/150 1 new

LED lighting module for double switch/push-button as control lampPower consumption 2x0.65 mAFor all two-circuit switch/push-button inserts or double switch/push-button inserts from Quick-Flex. The colours red, blue and green can each be set on the RGB LEDs via three switches. Combina-tions of colours are also possible.For use as control lamp. The module can be replaced from the front without any dismantling of switches.

— Contents: With two RGB LEDs.



MEG3902-0000 1/150 1 new

8-32 V, multicoloured MEG3922-0000 1/150 1 new

Neon lamp attachment with inte-grated lampAC 230 V, 0.65 mAFor all 1- and 2-pole switch inserts.For monitoring or lighting.



grey 396502 10/1000 1

Plug-in light attachment E 10For all 1- and 2-pole switch inserts.For monitoring or lighting.Caution!For low voltage variants (e.g. 8 V) we recommend a display lamp, 24-30 V, tubular, E 10, up to 25 mm in length.

˜ To be completed with: Neon lamp E 10, art. no. 395100. LED lamp E 10, art. no. 3951...

— Contents: Without neon lamp.


396576 10/1000 1

ww

w.m

erte

n.co

m


inserts

A

326 FLUSH-MOUNTED INSERTS/ACCESSORIES | Accessories for universal inserts | ©2010

LED lampAC/DC 230 V, AC/DC 24 VSuitable for plug-in light attachment E 10 or light signal E 10 insert.

˜ To be completed with: Plug-in light attachment E 10, art. no. 396576. Light signal E 10 insert, art. no. 319016.

— Note: Current consumption approx. 20 mA


AC 230 V, red 395120 20/240 1AC 230 V, yellow 395121 20/240 1AC 230 V, green 395122 20/240 1AC 230 V, blue 395123 20/240 1AC 230 V, white 395124 20/240 1AC 24 V, red 395131 20/240 1AC 24 V, yellow 395132 20/240 1AC 24 V, green 395133 20/240 1AC 24 V, blue 395134 20/240 1AC 24 V, white 395135 20/240 1

Neon lamp E 10AC 230 V, 0.65 mALow current consumption (approx. 0.65 mA) and low starting voltage (max. 120 V) mean it is par-ticularly suitable for stairwell and fluorescent lamp circuits.

˜ To be completed with: Plug-in light attachment E 10, art. no. 396576.


AC 230 V, 0.65 mA 395100 20/4080

1

Light attachment for multi switchAC 230 V, 2x1 mAFor monitoring or lighting applications.

˜ To be completed with: Two-circuit control switch insert with N ter-minal, art. no. 325500. Roller shutter rocker switch insert with additional contact, art. no. 311502.



396176 1/150 1 disc.

Light attachment for two-circuit switchAC 230 V, 2x1 mAFor lighting purposes.

˜ To be completed with: Rocker switch insert, art. no. 311500.— Contents: With neon lamp.


396276 1/150 1 disc.

Light attachment for 3-pole switchAC 400 V, 1.25 mAFor 3-pole switch.Contacts the outside terminals (400 V).

˜ To be completed with: Rocker switch insert, art. no. 311300. Rocker switch, art. no. 340339. Rocker control switch, art. no. 372375.



AC 400 V, 1.25 mA 396376 5/1020 1

Light signal E 10 insertAC 250 V, max. 3 WWith E 10 holder and red hood

˜ To be completed with: Central plate for light signal insert art. no. System M 3976.., 3978.., System Basis 3977.., , OCTOCOLOR 3191... Neon lamp E 10, art. no. 395100. LED lamp E 10, art. no. 3951...Accessories: Hood for light signal E 10, art. no. 319011/12/13/14.

— Contents: Without neon lamp.


hood, red 319016 10/50 1

Hood for light signal E 10Shatter-proof flat version for light signal E 10 insert.

˜ Accessories from: Light signal E 10 insert, art. no. 319016.


red 319011 1/250 1green 319012 1/250 1clear 319013 1/250 1yellow 319014 1/250 1

Extension clawsFor suspending in the standard claw.For the installation of flush-mounted inserts such as switches, push-buttons, socket-outlets etc. in the case of flush-mounted boxes which are built in too deeply.

— Contents: 1 PU consists of two extension claws and one rubber band.


533591 50/900 1

Assortment of screws in plastic boxContents:20 screws for socket-outlet covers, plain.20 screws for socket-outlet covers, black.


539591 14/224 1


ww

w.m

erte

n.co

m


A

©2010 | Accessories for universal inserts | FLUSH-MOUNTED INSERTS/ACCESSORIES 327

CapacitorAC 230 V, 0.33 µFFor use in push-button circuits to prevent flicker-ing of the neon lamp and/or instantaneous switching of the installation relay when several push-buttons with neon lamps are in use.For interference suppression of inductive loads, e.g. relays, contactors, fluorescent lamps, trans-formers, if the induction voltage of these devices leads to the retriggering of the ARGUS.


AC 230 V, 0.33 µF 542895 10/450 8



542894 1/48 8 disc.

Replacement fuse


for 400 W 550892 20/4080

8

for 500/600 VA 550992 20/4080

8

for 1000 VA 551092 20/4080

8

for halogen and halo-gen super dimmers 500 VA

551192 20/4080

8

for roller shutter con-trol and time switch 1000 VA

551292 20/4080

8

Spare batteryFor roller shutter controls and time switches.The battery has a life of approx. 3-6 years.

Ø11.5 mm: art. no. 5761.., 5762..Ø15.5 mm: year of manufacture up to 07.95: art. no. 5765.., 5766.., 5781.., 5782..


ø 11.5 mm 576101 10/300 8ø 15.5 mm 576102 10/300 8

Surge protection moduleAC 230 V, +6 % / -10 %For electronic transformers MET and ET dimmers.For protecting the transformer or dimmer during parallel operation of fluorescent lamps and other inductive loads with transformers.Connection parallel to the input side of the trans-former or dimmer. 1 module for max. 10 trans-formers per circuit is recommended.

Leakage current: (8/20) 4.5 kA (1x), 1 kA (100x)Residual voltage at discharge current: (1 kA) approx. 1000 V


552119 1/150 8

Surge protection module for socket-outletsMiniature version of direct line-side fine protec-tion with acoustic fault signal. The module can be installed for example in waterproof SCHUKO socket-outlets.It is advisable to clearly mark the relevant cover of the socket-outlet.

Type of protection: Fine protectionFailure indication: Acoustic signal


red 533497 1/100 8

Surge protection module for socket-outlet combinationsFor all combination SCHUKO flush-mounted socket-outlets.Suitable for standard size 60 installation box.It is advisable to clearly mark the cover of the rel-evant socket-outlet.

Mounting depth: 32 mmType of protection: Fine protectionFailure indication: Acoustic signalSpecial features: Test function


533498 1/50 8

Potential equalisation angled con-nectorDIN 42801 part 2Suitable for use as a potential equalisation socket-outlet insert.Solder connection up to 6 mm2.

˜ To be completed with: Potential equalisation socket-outlet insert, art. no. System M 2904.., 2982.., 2906.., System Basis 2970.., System Design 2973.., OCTOCOLOR 2972...


297190 10/500 1

Labelling softwareFor professional labelling of DIN A4 labelling sheets in System Basis, System M, System Design and OCTOCOLOR.


615022 1/20 9.1

Dirt cover for switches and socket-outletsFor protection of switches and socket-outlets from damage due to painting/varnishing work.


green MEG3900-0000 1/60 1 new

328

ww

w.m

erte

n.de

Radio system CoNNeCt | ©2010

CONNECT radio push-button,

2-gang Flush-mounted CONNECT

radio receiver,

universal dimmer

tHe saFest aNd most ReLiaBLe CoNNeCtioNsRadio system CoNNeCt

The CONNECT radio system ensures reliability

and safety. The transmitter and receiver makes

constant use of re-routing technology, and the

system operates free of interference at

868 MHz.

Diagnostic aids that are easy to operate tell the

user whether the radio connection is working.

And Easy Connect facilitates quick and simple

programming of the radio transmitter and re-

ceiver. This intelligent technology provides a

reliable basis for current operations, and is

paving the way for the innovations of the future.

CONNECT is already employing Z-Wave®, the

standard that will network the households of the

future. Intelligent recording of electricity, gas,

and water meters to enable energy-efficient and

low CO2 operation.

In addition, CONNECT is ideally suited as an

addition to existing electrical installations. This

makes it possible for existing buildings to be

easily retrofitted with modern communication

and control technology. The most reliable solution: the new CONNECT radio system signal searches further "stopovers" for the best path to the desired receiver.

Radio transmitter

Radio receiver

Radio receiver

WitH Re-RoutiNg teCHNoLogy

No way through: with reflective walls or obstacles, the receiver waits for the radio signal in vain.

Radiotransmitter

Radio receiver

Radio receiver

reflective wall

WitHout Re-RoutiNg teCHNoLogy

reflective wall

Z-Wave® is a registered trademark of Zensys Inc. and their branch offices in the USA and other countries. More information at: www.z-wavealliance.org.

Movement detector radio

ARGUS 220 CONNECT

Radio system

329

ww

w.m

erte

n.de

©2010 | Radio system CoNNeCt

CoNteNtsRadio system CoNNeCt

CONNECT radio central unit

The CONNECT radio central unit connects numer-

ous functions of the “radio world” and the

“IP world” in a single control unit. You can access

many functions even when you aren't home. The

CONNECT radio central unit has an additional

Ethernet connection and is controlled via

merten@home.

High-resolution, backlit TFT colour display (number of colours: 16-bit/64.000, brightness: 400 cd/m2)

Wide reading angle (60°– 80°)

Real-time clock

Very straightforward and convenient operation via dial ring (clickwheel) with four cursor keys and the enter key

Favourite key (request menu)

Home key calls up the menu structure directly

Eight freely programmable push-buttons for direct con-trol of functions

Red status LEDs

Individually configurable labelling field

Intended for flush mounting

Integrated radio antenna

Ethernet connection

Available in the colours alu-minium and polar white

Radio system

330

ww

w.m

erte

n.de

ww

w.m

erte

n.co

m

CONNECT RADIO SYSTEM

Radio system

B

330 CONNECT RADIO SYSTEM |©2010

Radio systemCONNECT radio systemSystem electronicsCONNECT radio systemCONNECT radio systemB

Radio system CoNNeCt | ©2010

Functions and device overview

Devices Device features

Radio functions

Radio features EASY CONNECT CONNECT configuration tool (optional)

CONNECT radio central unit, merten@home, colour5059..

■ Central device with eight freely programmable operator buttons

■ merten@home user interface

■ CONNECT radio system, central control and visualisation

■ Administration of central functions of the radio system (scenes, seasonal switch programs, history functions)

CONNECT radio universal remote control506923

■ Remote control for the radio receivers, Merten IR devices, and up to five IR AV devices

■ Switch on, switch off, toggle, dim, raise/lower roller shutters, scene

■ Graphic programming of the EASY CONNECT functions

CONNECT radio push-button, MoveSystem M 5080.., 5081..System Design 5082..

■ Mobile operating push button, battery powered

■ Toggle, dim ■ Switch on, switch off, push-button operation (bell), scenes

CONNECT radio push-button, 1-gangSystem M 5061.., 5051..System Design 5071..

■ Operating push button, battery powered, 2 channels, 12 radio receivers/channel

■ Switch on, switch off, dim, raise/lower roller shutters

■ Toggle, push-button operation (bell), scenes, division of channels

CONNECT radio push-button, 2-gangSystem M 5062.., 5052..System Design 5072..

■ Operating push button, battery powered, 4 channels, 12 radio receivers/channel

■ Switch on, switch off, dim, raise/lower roller shutters

■ Toggle, push-button operation (bell), scenes, division of channels

CONNECT radio sensor surface, for switch insertsSystem M: 5034.., 5024..System Design: 5044..

■ Control buttons

■ Toggle ■ Staircase lighting function, ON/OFF delay, master/slave

CONNECT radio sensor surface for dimmer insertsSystem M: 5036.., 5026..System Design: 5046..

■ Control buttons

■ Switch on (to memory value), switch off, dim

■ Adjustable dimming speed, staircase lighting function, master/slave, brightness limit, switch on to brightness limit, memory function that can be switched off

CONNECT radio roller shutter push-button with sensor connectionSystem M: 5035.., 5025..System Design: 5045..

■ Control buttons

■ Roller shutters Up/Down, save sun sensor light value locally

■ Master/slave, slats, up/down dura-tion

CONNECT radio transmitter flush-mounted, 4-gang506004

■ Battery powered, for up to 4 floating switch contacts

■ Remote control of the receivers via push-buttons

■ Switch on, switch off, dim, raise/lower shutters, push-button operation (bell), configuration as push-button or switch for all inputs.

CONNECT radio receiver, flush-mounted, 1-gang switch507501AC 230 V, 10 A

■ Switching a load via make contact

■ Switch on, switch off, toggle ■ Staircase lighting function,

ON/OFF delay

CONNECT radio receiver, flush-mounted, 1-gang universal dimmer507900AC 230 V, 25 VA-250 VA

■ Switching and dimming external loads


■ Adjustable dimming speed, staircase lighting function, master/slave, brightness limit, switch on to brightness limit, memory function that can be switched off

CONNECT radio receiver, flush-mounted, 2-gang switch507502AC 230 V, 6 A

■ Switching two loads via make contact

■ 1. Channel can be used, switch on, switch off, toggle

■ 2. Staircase lighting function, ON/OFF delay

CONNECT radio receiver, flush-mounted, 1-gang switch, 2-pole507601AC 230 V, 10 A

■ Switching a load via a 2-pole make contact


ON/OFF delay

CONNECT radio receiver, flush-mounted, 1-gang roller shutter507801AC 230 V, 6 A, cos j = 0.6500 VA

■ Controlling a roller shutter drive

■ Roller shutter Up/Down, Stop ■ Slats, up/down duration

331

ww

w.m

erte

n.de


ww

w.m

erte

n.co

m

Radio system

B

©2010 | CONNECT RADIO SYSTEM 331

Devices Device features

Radio functions

Radio features EASY CONNECT CONNECT configuration tool (optional)

CONNECT radio plug adapter, switch508519AC 230 V, 50 Hz16 A, cosj=1, max. 35mF

■ Switching external loads with SCHUKO plug


ON/OFF delay

CONNECT radio plug adapter, universal dimmer508619AC 230 V, 50 Hz40 VA-350 VA

■ Switching and dimming external loads with SCHUKO plug


■ Adjustable dimming speed, staircase lighting function, bright-ness limit, switch on to brightness limit, memory function that can be switched off

Radio ARGUS 220 CONNECT5095..

■ Outdoor movement detector ■ Up to four radio ARGUS 220 CONNECT devices can be net-worked and set via the remote control

■ ARGUS is fully integrated into the radio network

■ Teaching receivers ■ Function module like scene, message and alarm

Remote control for radio ARGUS 220 CONNECT509590

■ Radio remote control ■ Functions: Permanent ON, permanent OFF, automatic, brightness threshold, switching duration, set and change the sensitivity to movement

■ Up to four radio ARGUS 220 CONNECT devices can be net-worked and set via the remote control

CONNECT radio valve drive for heaters, comfort/standby509201

■ For manually adjusting the desired room temperature locally

■ Via radio central unit CONNECT: Reduce/increase temperature by 4 °C

inserts Functions Design covers

CONNECT radio sensor surface, for switch inserts

CONNECT radio sensor surface for dimmer inserts

CONNECT radio roller shutter push-button with sensor con-nection

System M 5034.., 5024.. 5036.., 5026.. 5035.., 5025..

System Design5044.. 5046.. 5045..

Electronic switch insert576799 (40 - 300 W)

Switching of ohmic loads

Relay switch insert5768970-1000 W/VA, max. 140 µF

Switching of ohmic, inductive or capacitive loads

Universal super dimmer insert577099For 50 Hz: 25 - 420 VA; For 60 Hz: 25 - 340 W

Dimming of ohmic, inductive and capacitive loads

Standard blind control insert580698 (max. 1 motor 1000 VA)

Controlling a blind/roller shutter drive

Blind control insert with extension input580699 (max. 1 motor 1000 VA)

Controlling a blind/roller shutter drive


Radio receiver for flush-mounted installation

©2010 | Radio system CoNNeCt

ww

w.m

erte

n.co

m


Radio system

B

332 CONNECT RADIO SYSTEM | CONNECT radio system, central unit | ©2010

Radio systemCONNECT radio systemSystem electronicsCONNECT radio systemCONNECT radio systemB

Merten CONNECT radio systemThe Merten CONNECT radio system is a bi-directional radio net-work. That means that all devices can transmit and receive signals simultaneously. It is possible, for example, for signals to be routed or for alternative radio transmission paths to be searched for (e.g. during temporary faults).

There are two configuration methods:• The EASY CONNECT method: For the connection of max. five

devices which are in the direct vicinity of one another (e.g. in one room). Configuration is carried out manually. Due to their complexity, some devices cannot be programmed with EASY CONNECT, or not all of the functions can be programmed. These devices are marked with a special symbol.

• Using the CONNECT radio configuration tool: For systems between different rooms with up to 100 devices and extensive functions (scenes, central switching function, switch times, indi-vidual key assignment).

For both types of installation method a so called "system adminis-trator" must always be integrated.

Properties: • Secure transmission using frequency range 868 MHz• Clear addressing enables interference-free operation of multi-

ple radio systems side by side• Very flexible installation and configuration• No cable routing required, due to the use of battery-powered

transmitters• Extension of existing installations• Implementation of groups, scene controlling options and cen-

tral functions• The extensive product spectrum covers all areas of application

such as lighting control, roller shutter control, scene and heat-ing control.

• Simple teaching of freely programmable functions• Extremely flat, battery-powered push-buttons, e.g. for attaching

to glass• Indoor transmission range: approx. 30 m (depending on place

of installation and building characteristics such as materials and wall strengths)

• Range in free field: approx. 100 m

Explanation of symbols:

Z-Wave standard The device is compatible with Z-wave products from other manufacturers.

The device can assume the functions of the sys-tem administrator. We recommend you use only fixed devices as system administrator (e.g. CON-NECT radio push-button, 1-gang).

The device has the routing function. It automati-cally relays signals and maintains fault-free oper-ation.

The device transmits signals.

The device receives signals and switches accord-ingly e.g. light or roller shutter.

The EASY CONNECT method is not available or only available with restrictions.

Z-Wave® is a registered trademark of Zensys Inc. and their branch offices in the USA and other countries.

– Technical Information: Radio system

CONNECT radio system, central unit

CONNECT radio central unit, merten@home, colourCentral device with eight freely programmable operator buttons and 3.5" colour display for the central control and visualisation of a Merten CONNECT radio system. The user interface is merten@home. Radio features: RouterThe radio central unit is configured with the CON-NECT radio configurator. It is installed in a flush-mounted double box. For the optional flush mounted power supply an addi-tional flush-mounted box is covered by the radio central unit.

Functions:• Administration of central functions of the radio

system (32 scenes, time switch with 20 weekly and 12 annual time switch programs, 1 history function)

• IP address: fixed or dynamic assignment via DHCP

• Integrated web server for PC operation, touch panel, PDA operation with merten@home

• Integrated real-time clock with reserve power of 4 hrs.

• Piezo loudspeaker for acoustic alarm• Alarm/message display and additional e-mail

forwarding• Signalling when e-mails arrive• Multimedia application: Controlling network

mp3 players or streaming clients• JPG image slide shows (FTP server on the Inter-

net)• Displaying current news (RSS feeder)

Power consumption: max. approx. 7 WPower supply: DC 24 V, 0.3 AOperating elements: clickwheel, arrow buttons, back key, home key, 8 operator buttons for direct accessDisplay size: 3.5“ (8.9 cm)Resolution: 320 x 240 pixelsDisplay type: TFT with 16 million coloursInterfaces: 1 x RJ45 Ethernet 10/100 MBit/s; CONNECT radio systemMemory: 8 MB Flash/RAMRadio frequency: 868 MHzRadio range: up to 50 m in free field, up to 20 m indoorsDimensions: 220 x 105 x 50 mm (HxWxD)Type of protection: IP 20

˜ Accessories: Power supply, flush-mounted, art. no. 505599. Dou-ble mounting box, art. no. 528668.Transmitter: All transmitters of the Merten CONNECT radio system.Receiver: All receivers of the Merten CONNECT radio system.

— Note: A RJ45 connector suitable for field assembly is recom-mended for the Ethernet connection, e.g. FM45 from Reichle+De-Massari. The CONNECT radio configuration tool, including updates, is available at www.merten.de or on the Merten info CD.Contents: With design frame.


polar white 505919 1/6 8aluminium 505960 1/6 8


ww

w.m

erte

n.co

m

Radio system

B

©2010 | CONNECT radio system, configurator | CONNECT RADIO SYSTEM 333

Power supply, flush-mountedFor supplying power to the CONNECT radio cen-tral unit, [email protected] power supply is installed via a flush-mounted box directly above the radio central unit's flush-mounted double box.

Primary supply: AC 230 V, 48-63 HzOutput voltage: DC 24 V +/- 3 %Output current: max. 0.5 AConnecting terminals:Screw terminals

˜ For supplying power to: CONNECT radio central unit, merten@home, colour art. no. 5059...


505599 1/70 8

CONNECT radio system, configurator

CONNECT radio USB data inter-faceFor connecting a PC equipped with a USB inter-face to the Merten CONNECT radio system. The radio system is conveniently configured on the PC using the CONNECT radio configurator and is set up via the data interface.Radio features: System administrator

Functions:• "plug and play" installation• Driver for all common Windows operating sys-

tems• Fastening clip for fastening on to a Notebook

display• Power supply via the PC's USB interface.

˜ Transmitter: All transmitters of the Merten CONNECT radio system.Receiver: All receivers of the Merten CONNECT radio system.

— Contents: CD with CONNECT radio configuration tool, USB cable.


506801 1/12 8

CONNECT radio configuration toolSoftware for conveniently programming the Merten CONNECT radio system components.

Functions:• Graphic user interface. To link the compo-

nents, drag the connection lines with the mouse.

• Filter functions• Analysis and search functions• Diagnostics functions: e.g. single diagnosis of

the radio system at the installation location• Conformance measurement• Documentation of installation and diagnostics

log

— Note: The CONNECT radio configuration tool, including updates, is available at www.merten.de or on the Merten info CD.

CONNECT radio system, push-button















ww

w.m

erte

n.co

m


Radio system

B

334 CONNECT RADIO SYSTEM | CONNECT radio system, push-button | ©2010

CONNECT radio push-button, MoveFor System M.Battery-powered mobile radio transmitter with 1 channel. For activating the Merten CONNECT radio system's radio receiver. A maximum of 12 radio receivers can be connected. Radio features: System administrator (see note)Suitable for sticking onto walls or glass, screwing onto walls or flush-mounted outlets, or installing in a multiple combination. A flush-mounted box is not required.Functions:EASY CONNECT:• Toggle, dimWith CONNECT radio configuration tool:• additionally switch on, switch off, push-button

operation (bell), scenes

Channels: 1Range: up to 100 m free field, up to 30 m indoorsBattery: 1 lithium button cell (CR 2450N)Display elements: LED for transmission confir-mation/programmingDimensions: 44 x 12.5 mm (Ø x H)

˜ Receiver: All receivers of the Merten CONNECT radio system.— Note: The device can assume the features and characteristics of

the system administrator. As it concerns a mobile device we recom-mend that you preferably select a fixed device as system adminis-trator. Instead use for example a CONNECT radio push-button, 1-gang.Contents: Battery, wall bracket, double-sided adhesive strips, sin-gle-sided adhesive foils aluminium-coloured, screws, dowels.


˜ Thermoplastic brilliantwhite, glossy 508144 1/40 8polar white, glossy 508119 1/40 8active white, glossy 508125 1/40 8

˜ Thermoplastic classy mattwhite 508044 1/40 8polar white 508019 1/40 8anthracite 508014 1/40 8aluminium 508060 1/40 8

˜ Duroplastic, highly scratch-resistant: With this article, use thermoplastic brilliant

CONNECT radio push-button, 1-gangFor System M.Battery-powered radio transmitter with 2 chan-nels. For activating the Merten CONNECT radio system's radio receiver. A maximum of 12 radio receivers per channel can be connected.Radio features: System administratorSuitable for sticking onto walls or glass, screwing onto walls or flush-mounted outlets, or installing in a multiple combination. A flush-mounted box is not required.Functions:EASY CONNECT:• Switch on, switch off, dim, raise/lower roller

shuttersWith CONNECT radio configuration tool:• additionally toggle, push-button operation

(bell), scenes, division of channels

Channels: 2Range: up to 100 m free field, up to 30 m indoorsBattery: 1 lithium button cell (CR 2450N)Display elements: LED for transmission confir-mation/programming

˜ Receiver: All receivers of the Merten CONNECT radio system.— Contents: Battery, retaining plate, double-sided adhesive strips,

single-sided adhesive foils aluminium-coloured, screws, dowels.






ww

w.m

erte

n.co

m

Radio system

B

©2010 | CONNECT radio system, push-button | CONNECT RADIO SYSTEM 335

CONNECT radio push-button, 2-gangFor System M.Battery-powered radio transmitter with 4 chan-nels. For activating the Merten CONNECT radio system's radio receiver. A maximum of 12 radio receivers per channel can be connected. Radio features: System administratorSuitable for sticking onto walls or glass, screwing onto walls or flush-mounted outlets, or installing in a multiple combination. A flush-mounted box is not required.Functions:EASY CONNECT:• Switch on, switch off, dim, raise/lower roller










CONNECT radio push-button, MoveFor System Design.Battery-powered mobile radio transmitter with 1 channel. For activating the Merten CONNECT radio system's radio receiver. A maximum of 12 radio receivers can be connected. Radio features: System administrator (see note)Suitable for sticking onto walls or glass, screwing onto walls or flush-mounted outlets, or installing in a multiple combination. A flush-mounted box is not required.Functions:EASY CONNECT:• Toggle, dimWith CONNECT radio configuration tool:• additionally switch on, switch off, push-button

operation (bell), scenes

Channels: 1Range: up to 100 m free field, up to 30 m indoorsBattery: 1 lithium button cell (CR 2450N)Display elements: LED for transmission confir-mation/programmingDimensions: 44 x 12.5 mm (Ø x H)

˜ Receiver: All receivers of the Merten CONNECT radio system.— Note: The device can assume the features and characteristics of

the system administrator. As it concerns a mobile device we recom-mend that you preferably select a fixed device as system adminis-trator. Instead use for example a CONNECT radio push-button, 1-gang.Contents: Battery, wall bracket, double-sided adhesive strips, sin-gle-sided adhesive foils aluminium-coloured, screws, dowels.


˜ Thermoplastic brilliantwhite 508244 1/40 8polar white 508219 1/40 8aluminium 508260 1/40 8

˜ metallicvarnished stainless steel

508246 1/40 8

ww

w.m

erte

n.co

m


Radio system

B

336 CONNECT RADIO SYSTEM | CONNECT radio system, push-button | ©2010

CONNECT radio push-button, 1-gangFor System Design.Battery-powered radio transmitter with 2 chan-nels. For activating the Merten CONNECT radio system's radio receiver. A maximum of 12 radio receivers per channel can be connected.Radio features: System administratorSuitable for sticking onto walls or glass, screwing onto walls or flush-mounted outlets, or installing in a multiple combination. A flush-mounted box is not required.Functions:EASY CONNECT:• Switch on, switch off, dim, raise/lower roller









507146 1/40 8

CONNECT radio push-button, 2-gangFor System Design.Battery-powered radio transmitter with 4 chan-nels. For activating the Merten CONNECT radio system's radio receiver. A maximum of 12 radio receivers per channel can be connected. Radio features: System administratorSuitable for sticking onto walls or glass, screwing onto walls or flush-mounted outlets, or installing in a multiple combination. A flush-mounted box is not required.Functions:EASY CONNECT:• Switch on, switch off, dim, raise/lower roller









507246 1/40 8

CONNECT radio transmitter flush-mounted, 4-gangBattery-powered radio transmitter for connecting up to 4 floating switch contacts (e.g. standard push-buttons). For the remote control of other receivers from the Merten CONNECT radio sys-tem via push-buttons from the Merten switch ranges.Radio features: TransmitterAutomatic recognition of the connected devices (switches or push-buttons).Suitable for installation underneath push-button inserts or in empty flush-mounted boxes.Functions:With CONNECT radio configuration tool:• Switch on, switch off, toggle, dim, raise/lower

shutters, push-button operation (bell), configu-ration as push-button or switch for all inputs.

Channels: 4Range: up to 100 m (free field)up to 30 m (building)Battery: 1 lithium button cell (CR 2450N)Display elements: LED for send confirmationDimensions: 43 x 41 x 14 mm (H x W x D)

˜ Receiver: All receivers of the Merten CONNECT radio system.


506004 1/100 8


ww

w.m

erte

n.co

m

Radio system

B

©2010 | CONNECT radio system, switching/dimming | CONNECT RADIO SYSTEM 337

CONNECT radio system, switching/dimming







25-420 VA 577099 1/50 8

CONNECT radio sensor cover for dimmer insertsFor System M.Operator button to toggle or switch/dim an out-put. Manual operation and remote control possi-ble via Merten CONNECT radio system transmitters.Radio features: Router

Functions:EASY CONNECT:• Switch on (to memory value), switch off, dimWith CONNECT radio configuration tool:• additionally adjustable dimming speed, stair-

case lighting function, master/slave, bright-ness limit, switch on to brightness limit, memory function that can be switched off

˜ To be completed with: Universal super dimmer insert, art. no. 577099 from version 3A.Transmitter: All transmitters of the Merten CONNECT radio system.





CONNECT radio sensor cover for dimmer insertsFor System Design.Operator button to toggle or switch/dim an out-put. Manual operation and remote control possi-ble via Merten CONNECT radio system transmitters.Radio features: Router







504646 1/100 8






0-1000 VA 576897 1/50 8

ww

w.m

erte

n.co

m


Radio system

B

338 CONNECT RADIO SYSTEM | CONNECT radio system, switching/dimming | ©2010







40-300 W 576799 1/50 8

CONNECT radio sensor cover, for switch insertsFor System M.Operator button for switching an output. Manual operation and remote control possible via Merten CONNECT radio system transmitters. Radio features: Router

Functions:EASY CONNECT:• ToggleWith CONNECT radio configuration tool:• additionally staircase lighting function, ON/

OFF delay, master/slave

˜ To be completed with: Relay switch insert, art. no. 576897. Elec-tronic switch insert, art. no. 576799 from version 2A.Transmitter: All transmitters of the Merten CONNECT radio system.





CONNECT radio sensor cover, for switch insertsFor System Design.Operator button for switching an output. Manual operation and remote control possible via Merten CONNECT radio system transmitters. Radio features: Router







504446 1/100 8

CONNECT radio receiver, flush-mounted, 1-gang switchFor switching loads via a make contact. Can be remote-controlled via transmitters in the Merten CONNECT system.Radio features: RouterSuitable for installation into a size 60 installation box.With snap-off mounting plates.With screw terminals.Functions:EASY CONNECT:• Switch on, switch off, toggleWith CONNECT radio configuration tool:• additionally staircase lighting function, ON/

OFF delay

Nominal voltage: AC 230 VNominal current: 10 AConnected loads:Incandescent lamps: AC 230 V, 2000 WHalogen lamps: AC 230 V, 1500 WCapacitive load: 35 µFDisplay elements: LED for status displayOperating elements: Push-button for local opera-tion and programmingDimensions: 48 x 52 x 27 mm (H x W x D)

˜ Transmitter: All transmitters of the Merten CONNECT radio system.


507501 1/100 8


ww

w.m

erte

n.co

m

Radio system

B

©2010 | CONNECT radio system, switching/dimming | CONNECT RADIO SYSTEM 339

CONNECT radio receiver, flush-mounted, 1-gang universal dim-merAC 230 VTo switch and dim external loads.Radio feature: routerFor ohmic, inductive and capacitive loads, e.g. incandescent lamps, dimmable wound transform-ers and electronic transformers. (Phase control or phase alignment).Manual operation using the key on the device via an extension unit and remote controlled using the CONNECT radio system's transmitter.The integrated universal dimmer automatically recognises the connected load. Do not connect any mixed loads. With memory function.Suitable for installation into a size 60 installation box.With snap-off mounting plates.Functions:EASY CONNECT:• Switch on (to memory value), switch off, dimWith CONNECT radio configuration tool:• additionally adjustable dimming speed, stair-


Nominal voltage: AC 230 VMinimum load: 25 VAMaximum load: 250 VADisplay elements: LED for status displayOperating elements: Key for local operation and programmingSafety: Overload protection, short-circuit protec-tionDimensions: 48 x 52 x 27 mm (HxWxD)



507900 1/100 8

CONNECT radio receiver, flush-mounted, 2-gang switchFor switching two loads via make contact. Can be remote-controlled via Merten CONNECT radio sys-tem transmitters.Radio features: routerSuitable for installation into a size 60 installation box.With snap-off mounting plates.With screw terminals.Functions:EASY CONNECT:• 1. Channel can be used, switch on, switch off,

toggleWith CONNECT radio configuration tool:• 2. additionally staircase lighting function, ON/

OFF delay

Nominal voltage: AC 230 VNominal current: 6 AConnected loads:Incandescent lamps: AC 230 V, 600 WHalogen lamps: AC 230 V, 600 WDisplay elements: LED for status displayOperating elements: Push-button for local opera-tion and programmingDimensions: 48 x 52 x 27 mm (H x W x D)



507502 1/100 8

CONNECT radio receiver, flush-mounted, 1-gang switch, 2-poleFor switching a load via a 2-pole make contact. Can be remote-controlled via Merten CONNECT radio system transmitters.Radio features: routerSuitable for installation into a size 60 installation box.With snap-off mounting plates.With screw terminals.Functions:EASY CONNECT:• Switch on, switch off, toggleWith CONNECT radio configuration tool:• additionally staircase lighting function, ON/

OFF delay

Nominal voltage: AC 230 VNominal current: 10 AConnected loads:Incandescent lamps: AC 230 V, 1200 WHalogen lamps: AC 230 V, 800 WCapacitive load: 14 µFDisplay elements: LED for status displayOperating elements: Push-button for local opera-tion and programmingDimensions: 48 x 52 x 27 mm (H x W x D)



507601 1/100 8

CONNECT radio plug adapter, switchAC 230 V, 50 HzFor switching external loads with SCHUKO plug.Radio features: RouterManual operation via the sensor surface and remote control possible via Merten CONNECT radio system transmitters.

Functions:EASY CONNECT:• Switch on, switch off, toggleWith CONNECT radio configuration tool:• additionally staircase lighting function, ON/

OFF delay

Nominal voltage: AC 230 V, 50 HzNominal current:16 A, cos = 1Incandescent lamps: AC 230 V, max. 2000 WHalogen lamps: AC 230 V, max. 2000 WCapacitive load: max. 35 µFDimensions: 120x65x38 mm (HxWxD)Display elements: LED for status displayOperating elements: Sensor surface for local operation and programmingType of protection: IP 20



polar white 508519 1/16 8

ww

w.m

erte

n.co

m


Radio system

B

340 CONNECT RADIO SYSTEM | CONNECT radio system, roller shutter | ©2010

CONNECT radio plug adapter, uni-versal dimmerAC 230 V, 50 HzFor switching and dimming external loads with SCHUKO plug.Radio features: RouterFor ohmic, inductive and capacitive loads, e.g. incandescent lamps, dimmable wound transform-ers and electronic transformers. (Phase control or phase alignment).Manual operation via the sensor surface and remote control possible via Merten CONNECT radio system transmitters.The integrated universal dimmer automatically recognises the connected load. Do not connect any mixed loads. With memory function, can be switched off.


case lighting function, brightness limit, switch on to brightness limit, memory function that can be switched off

Nominal voltage: AC 230 V, 50 HzMinimum load:40 VAMaximum load:350 VADimensions: 120x65x38 mm (HxWxD)Display elements: LED for status displayOperating elements: Sensor surface for local operation and programmingType of protection: IP 20

˜ Transmitter: All transmitters of the Merten CONNECT radio system.– Technical Information



CONNECT radio system, roller shutter






1000 VA 580698 1/50 8







1000 VA 580699 1/50 8

CONNECT radio roller shutter push-button with sensor connec-tionFor System M.Operating button for roller shutter motors. Man-ual operation and remote control possible via Merten CONNECT radio system transmitters. With electronic locking device.Possible to connect sun/twilight sensor. Radio features: RouterA screw terminal on the blind control insert con-nects the sensor cable with the roller shutter push-button. Brightness value of sun sensor set to approx. 20000 lux.

Functions:EASY CONNECT:• Roller shutters Up/Down, save sun sensor light

value locallyWith CONNECT radio configuration tool:• additionally master/slave, louvres, up/down

duration

˜ To be completed with: Blind control insert, art. no. 580698, 580699.Accessories: Sun/twilight sensor, art. no. 580691.Transmitter: All transmitters of the Merten CONNECT radio system.






ww

w.m

erte

n.co

m

Radio system

B

©2010 | CONNECT radio system, ARGUS movement detector | CONNECT RADIO SYSTEM 341

CONNECT radio roller shutter push-button with sensor connec-tionFor System Design.Operating button for roller shutter motors. Man-ual operation and remote control possible via Merten CONNECT radio system transmitters. With electronic locking device.Possible to connect sun/twilight sensor. Radio features: RouterA screw terminal on the blind control insert con-nects the sensor cable with the roller shutter push-button. Brightness value of sun sensor set to approx. 20000 lux.



duration





504546 1/60 8

CONNECT radio receiver, flush-mounted, 1-gang roller shutterFor controlling a roller shutter drive. Can be remote-controlled via Merten CONNECT radio sys-tem transmitters.Radio features: routerSuitable for installation into a size 60 installation box.With snap-off mounting plates.With screw terminals.Functions:EASY CONNECT:• Roller shutter Up/Down, StopWith CONNECT radio configuration tool:• Louvres, up/down duration

Nominal voltage: AC 230 VNominal current: 6 A, cos =0.6Connected loads:Motor load: AC 230 V, 500 VADisplay elements: LED for status displayOperating elements: Push-button for local opera-tion and programmingDimensions: 48 x 52 x 27 mm (H x W x D)



507801 1/100 8

CONNECT radio system, ARGUS movement detector

Radio ARGUS 220 CONNECTElectronic outdoor movement detector. 220° sur-face monitoring for large house fronts and sec-tions of the house.• 360° short-range zone (approx. 4 m radius).• Large wiring compartment and plug system.• Looping is possible.• LED function display for fast alignment at the

installation site.• Operating elements are protected under the

easily accessible cover plate.• Flexibly adjustable sensor head.• Possible to blank out individual lens areas.Can be installed on walls and ceilings without additional accessories. Can be mounted on inner/outer corners and stationary pipes using a mounting bracket.Functions:Up to four radio ARGUS 220 CONNECT devices can be networked and set via the remote control (permanent ON, permanent OFF, automatic, brightness threshold, switching time, set and change the sensitivity to movement.)In conjunction with the CONNECT radio configura-tion tool, you can:• fully integrate the radio ARGUS 200 CONNECT

into the radio network and network with other devices.

• Teaching receivers.• Use function module like scene, message and

alarm.

Mains voltage: AC 230 V ±10 %, 50 HzIncandescent lamps: AC 230 V, max. 2000 WHalogen lamps: AC 230 V, max. 2000 WFluorescent lamps: AC 230 V, 1200 W uncom-pensatedCapacitive load: max. 35 µFMax. switching current: 16 A, AC 230 V, cos = 1Angle of detection: 220°Range: max. 16 mNumber of levels: 7Number of zones: 112 with 448 switching seg-mentsLight sensor: infinitely adjustable from 3-1000 LuxTime: 1 sec. to approx. 8 min. in 6 steps Sensitivity: infinitely adjustableNeutral conductor: requiredSensor head adjustment for wall mounting:9° up, 24° down, 12° left/right, ± 12° axialSensor head adjustment for ceiling mounting:4° up, 29° down, 25° left/right, ± 8.5° axialEC directives: Low voltage directive 2006/95/EEC and EMC directive 2004/108/EECRadio frequency: 868 MHzTransmission range: up to 100 m in free field, up to 30 m indoorsType of protection: IP 55Dimensions: 151x93x71 mm (HxWxD)

˜ Accessories: Remote control for radio ARGUS 220 CONNECT, art. no. 509590. Mounting bracket, art. no. 565291, 565293. Capaci-tor, art. no. 542895.

— Contents: With cover plate and segments to limit the area of detection, screws and plugs.


polar white 509519 1/12 8.4aluminium 509560 1/12 8.4

ww

w.m

erte

n.co

m


Radio system

B

342 CONNECT RADIO SYSTEM | CONNECT radio system, heating | ©2010

Remote control for radio ARGUS 220 CONNECTOne radio ARGUS 220 CONNECT or one radio receiver switch each can be taught, networked and set for each key (A1-A4) on the remote con-trol.

Functions:You can set the following functions on the ARGUS: Operating mode (permanent ON, perma-nent OFF, automatic), brightness threshold, switching duration, set and change the sensitivity to movement.

Channels: 4Radio frequency: 868 MHzRange: up to 100 m in free field, up to 30 m indoorsBattery: 1 lithium button cell (CR 2450N)Display elements: Status LED

˜ Receiver: Radio ARGUS 220 CONNECT, art. no. 5095...— Contents: With battery.


509590 1/48 8.4

CONNECT radio system, heating

CONNECT radio valve drive for heaters, comfort/standbyHeating thermostat for manually adjusting the desired room temperature in situ.With limitation facility of the mechanical adjust-ing range.Thermostat head is suitable for Heimeier valves M 30 x 1.5.

Functions:With CONNECT radio configuration tool:• In conjunction with the CONNECT radio central

unit, the temperature can, for instance, be raised or lowered by 4 °C.

Operating elements: Programming button, key for toggling between comfort/standbyDisplay elements: Comfort (Sun), standby (Moon)Battery: 2 Mignon 1.5 V (IEC LR 6, AA)Battery service life: approximately 2 heating periodsTemperature range: 8 - 28°C

˜ Transmitter: CONNECT radio central unit, merten@home, colour art. no. 5059...


polar white 509201 1/10 8 disc.


ww

w.m

erte

n.co

m

Radio system

B

©2010 | CONNECT radio system, heating | CONNECT RADIO SYSTEM 343

344

ww

w.m

erte

n.de

Dimmer system / transformers | ©2010

Universal dimmer insert, 2-gang

One for all. The new universal dimmer

insert has 2 channels, each of which

can be operated with a maximum load

of 200 watts.

Best of all: these loads can be com-

pletely different – purely ohmic loads,

ohmic and capacitive loads, or ohmic

and inductive loads. Another advan-

tage: irrespective of which load is

connected – the new two-circuit

dimmer detects it automatically.

Another nice new feature: with imme-

diate effect, a simple two-circuit switch

can be exchanged for a 2-gang dimmer

without a second box having to be

positioned, as used to be the case.

Dial-type light dimmer

First-class dimming. A dimmer that's

got the lot: easy to operate, multiple

functions and a good memory. The

convenient dial can do much more

than just make the light brighter or

darker. For example, with the touch of

a button, the maximum brightness can

be limited to 80 %. The memory button

can be used to save favourite bright-

ness values. The convenient dial even

helps you in the dark: with the discreet

orientation light that can also be

deactivated when not needed.

Universal dimmer REG

Flexible dimming. The universal

dimmers REG make implementing

or changing dimming functions fast

and easy. Loads can be dimmed via

the channel buttons on the device or

via an extension unit (push-button or

electronic (TELE) extension unit). Ten

electric and any number of mechanical

push-buttons can be connected per

channel.

inDiviDual requirements. inDiviDual solutions.Dimmer system

Dimmersystem

345

ww

w.m

erte

n.de

©2010 | Dimmer system / transformers

ContentsDimmer system

Convenient dial for universal

super-dimmer insert

Universal dimmer insert, 2-gang

Universal rotary dimmer insert for ohmic,

capacitive and inductive loads

2-gang universal dimmer – the first

two-circuit dimmer from Merten

neW

Dimmersystem

346

ww

w.m

erte

n.de

ww

w.m

erte

n.co

m

DIMMER SYSTEM/TRANSFORMERS

Dimmer system

D

346 DIMMER SYSTEM/TRANSFORMERS | ©2010

Dimmer systemDimmer system/transformersSystem electronicsDimmer system/transformersDimmer system/transformersD

Dimmer system / transformers | ©2010


Function inserts Design cover

Local operation

Sensor surface

System M 5776.., 5701.., 5704..

System Design 5737..

System Basis 5741..

OCTOCOLOR 5742..

AQUADESIGN 5738..

Electronic switch (2 conductors - neutral conductor is not required)

Switching of ohmic loads ■ Incandescent lamps, 230 V halogen lamps ■ Extension input for push-buttons and extension TELE inserts

Electronic switch insert575799 (25 - 400 W)AC 220-230 V, 50-60 Hz

Switching of ohmic loads ■ Incandescent lamps, 230 V halogen lamps

Electronic switch insert576799 (40 - 300 W)

Pulse generator for surge switches or protective circuits ■ The switching function is determined by the surge switch/protective circuit used.

■ Extension input for push-buttons and extension TELE inserts

Electronic push-button insert574697 (4 - 100 VA)

Relay switch (3 conductors - neutral conductor is required)

Switching, timed switching, push-button operation of ohmic, inductive and capacitive loads

■ Push-button function, time function, switch function ■ Incandescent lamps, energy-saving lamps, LV halogen lamps with conventional transformer, fluorescent lamps

■ Extension input for push-buttons and extension TELE inserts

Universal relay insert575897AC 220-230 V, 50-60 Hz, max. 1000 W/VA; 500 VA for LV halogen lamps with conventional transformer, max 140 µF

Switching of ohmic, inductive or capacitive loads ■ Incandescent lamps, fluorescent lamps, energy-saving lamps, LV halo-gen lighting etc.

Relay switch insert5768970-1000 W/VA, max. 140 µF

Dimmer (2 conductors - neutral conductor is not required)

Dimming of ohmic, inductive and capacitive loads ■ Incandescent lamps, 230 V halogen lamps, dimmable wound transformers, electronic transformers

■ Phase control or phase alignment ■ Extension input for push-buttons and extension TELE inserts

Universal super dimmer insert577099For 50 Hz: 25 - 420 VA; For 60 Hz: 25 - 340 W

Dimming of ohmic, inductive and capacitive loads ■ Incandescent lamps, 230 V halogen lamps, dimmable wound transformers, electronic transformers

■ Phase control or phase alignment ■ Extension input for push-buttons and extension inserts

Universal dimmer insert, 2-gang568099AC 230 V, 50-60 Hz, 2 x 50-200 VA

Dimming of ohmic loads ■ Incandescent lamps, 230 V halogen lamps ■ Phase control ■ Extension input for push-buttons and extension TELE inserts

Memory super dimmer insert for ohmic load573399 (60 - 400 W)577299 (60 - 600 W, halogen 500 W)

Dimming of inductive loads ■ Dimmable, wound transformers and incandescent lamps ■ Phase control ■ Extension input for push-buttons and extension TELE inserts

Memory halogen super dimmer insert for inductive load573599 (20 - 500 VA)

Dimming of capacitive loads ■ Electronic transformers and incandescent lamps ■ Phase alignment ■ Extension unit operation with mechanical push-buttons or universal relay insert, art. no. 575897 with configured push-button function.

Memory ET super dimmer insert for capacitive load577899 (20 - 315 W)

Extension unit

Operator function as extension unit like main unit ■ Control of the extension input of the main unit

Extension inserts573999

Operator function as extension unit like main unit ■ Control of the extension input of the main unit; can be operated remotely ■ Neutral conductor required

Extension TELE insert573998

347

ww

w.m

erte

n.de


ww

w.m

erte

n.co

m

Dimmer system

D

©2010 | DIMMER SYSTEM/TRANSFORMERS 347©2010 | Dimmer system / transformers

Local operation / IR remote control

Local operation Local operation Local operation/radio remote control:CONNECT radio system

Local operation

TELE sensor surface Comfort rotating regulator for universal super-dimmer insert

2-gang push-button module CONNECT radio sensor surface for dimmer inserts

CONNECT radio sensor sur-face, for switch inserts

Control electronics, 1-gang569090

5779.., 5703.., 5711.. 5677.., 5678... 568499 5026.., 5036.. 5024.., 5034..

5709.. 568199 5046.. 5044

5748..

5749..

from version 2A

from version 1FMinimum load: 40 W

from version 3AMinimum load: 40 W

ww

w.m

erte

n.co

m


Dimmer system

D

348 DIMMER SYSTEM/TRANSFORMERS | Comfort rotary dimmer | ©2010

Dimmer systemDimmer system/transformersSystem electronicsDimmer system/transformersDimmer system/transformersD


Explanation of symbols for dimmers:230 V incandescent lamps

230 V halogen lamps



Electric motors

Comfort rotary dimmer







25-420 VA 577099 1/50 8

Central plate of comfort rotating regulator for universal super dim-mer insertFor System M.Manual operation.With the rotary knob and four operating surfaces for further functions. The light segments arranged around the rotary knob show the set brightness value. Functions:• Switching on and off by pressing or turning the

rotary knob• The dimming speed depends on the rotational

speed• Retrieving/storing two brightness values• Switching orientation light on/off• Switching energy saving function on/off

(restriction of the max. brightness to 80%)

˜ To be completed with: Universal super dimmer insert, art. no. 577099.





Rotary dimmers

Universal rotary dimmer insertAC 230 V, 50 HzFor ohmic, inductive and capacitive loads, e.g. incandescent lamps, dimmable wound transform-ers or electronic transformers.Phase control or phase alignmentThe universal dimmer automatically recognises the connected load. Do not connect any mixed loads.With pressure-operated two-way switch.



20-420 W/VA MEG5138-0000 1/72 8 new20-600 W/VA MEG5139-0000 1/72 8 new


ww

w.m

erte

n.co

m

Dimmer system

D

©2010 | Rotary dimmers | DIMMER SYSTEM/TRANSFORMERS 349

Rotary dimmer insert for ohmic load with pressure-operated on/off switchAC 230 V, 50 HzFor incandescent lamps and 230 V halogen lamps.(Phase control).With pressure-operated on/off switch.




40-400 W MEG5131-0000 1/72 8 new

Rotary dimmer insert for ohmic load with pressure-operated two-way switchAC 230 V, 50 HzFor incandescent lamps and 230 V halogen lamps.(Phase control).With pressure-operated two-way switch.




40-400 W MEG5132-0000 1/72 8 new

Rotary dimmer insert for inductive loadAC 230 V, 50 HzFor dimmable, wound transformers, incandes-cent lamps and 230 V halogen lamps (inductive/ohmic load).(Phase control).With pressure-operated two-way switch.




40-600 W/VA MEG5133-0000 1/72 8 new

Rotary dimmer insert for inductive loadAC 230 V, 50 HzFor dimmable, wound transformers, incandes-cent lamps and 230 V halogen lamps (inductive/ohmic load).(Phase control).With pressure-operated on/off switch.

Nominal power: 60-1000 VAMotor load: 60-600 VANeutral conductor:required




60-1000 VA MEG5135-0000 1/72 8 new





20-315 W MEG5136-0000 1/72 8 new





20-630 W MEG5137-0000 1/72 8 new

ww

w.m

erte

n.co

m


Dimmer system

D

350 DIMMER SYSTEM/TRANSFORMERS | Rotary dimmers | ©2010

Electronic potentiometer insert 1-10 VAC 230 V, 50 HzFor fluorescent lamps with electronic ballast or electronic transformer with 1-10 V interface.With pressure-operated on/off switch 1.7 A.




MEG5142-0000 1/72 8 new

Central plate with rotary knobFor System M.

˜ To be completed with: Universal rotary dimmer insert, MEG5138-0000, MEG5139-0000. Rotary dimmer insert for ohmic load with pressure-operated on/off switch, MEG5131-0000. Rotary dimmer insert for ohmic load with pressure-operated two-way switch, MEG5132-0000. Rotary dimmer insert for inductive load, MEG5133-0000, MEG5135-0000. Rotary dimmer insert for capac-itive load, MEG5136-0000, MEG5137-0000. Electronic potentiom-eter insert 1-10 V, MEG5142-0000.


˜ Thermoplastic brilliantwhite, glossy MEG5250-0344 5/120 8 newpolar white, glossy MEG5250-0319 5/120 8 newactive white, glossy MEG5250-0325 5/120 8 new

˜ Thermoplastic classy mattwhite MEG5250-0444 5/120 8 newpolar white MEG5250-0419 5/120 8 newanthracite MEG5250-0414 5/120 8 newaluminium MEG5250-0460 5/120 8 new

˜ Duroplastic, highly scratch-resistantwhite MEG5250-0644 5/120 8 newpolar white MEG5250-0619 5/120 8 new

Central plate with rotary knobFor System Design.

˜ To be completed with: Universal rotary dimmer insert, MEG5138-0000, MEG5139-0000. Rotary dimmer insert for ohmic load with pressure-operated on/off switch, MEG5131-0000. Rotary dimmer insert for ohmic load with pressure-operated two-way switch, MEG5132-0000. Rotary dimmer insert for inductive load, MEG5133-0000, MEG5135-0000. Rotary dimmer insert for capac-itive load, MEG5136-0000, MEG5137-0000. Electronic potentiom-eter insert 1-10 V, MEG5142-0000.


˜ Thermoplastic brilliantpolar white MEG5250-4019 10/120 8 newlight grey MEG5250-4029 5/120 8 newdark brazil MEG5250-4015 5/120 8 newblack grey MEG5250-4069 5/120 8 newaluminium MEG5250-4060 5/120 8 new

˜ metallicantique brass MEG5250-4143 5/120 8 newstainless steel MEG5250-4146 5/120 8 new

˜ Duroplastic, highly scratch-resistantwhite MEG5250-4244 5/120 8 newpolar white MEG5250-4219 5/120 8 new

Central plate for rotary dimmer inserts up to 600 VAFor OCTOCOLOR.

˜ To be completed with: Universal rotary dimmer insert, MEG5138-0000, MEG5139-0000. Rotary dimmer insert for ohmic load with pressure-operated on/off switch, MEG5131-0000. Rotary dimmer insert for ohmic load with pressure-operated two-way switch, MEG5132-0000. Rotary dimmer insert for inductive load, MEG5133-0000, MEG5135-0000. Rotary dimmer insert for capac-itive load, MEG5136-0000, MEG5137-0000. Electronic potentiom-eter insert 1-10 V, MEG5142-0000.To be completed with: Dimmer insert, art. no. 572199, 572499, 572299, 572599, 577199, 572999, 573299.


˜ Thermoplastic brilliantwhite 572644 10/120 8polar white 572619 10/120 8

˜ metallicbronze metallic 572642 5/120 8titanium 572605 5/120 8


ww

w.m

erte

n.co

m

Dimmer system

D

©2010 | Rotary dimmer inserts for 600 VA | DIMMER SYSTEM/TRANSFORMERS 351

– Technical Information: Dimmer basics; Dimmer and load types

Rotary dimmer inserts for 600 VA


• The following applies to all types of dimmers: If the dimmers cannot dissipate sufficient heat (cavity walls, multiple combina-tions, surface-mounted combinations and built-in dimmers on DIN rails), the connected loads specified may not be exploited to the maximum.

Dimmer insert for ohmic loadAC 230 VFor incandescent lamps and 230 V halogen lamps.With pressure-operated one-way switch.(Phase control).




60-400 W 572199 1/50 8.5 disc.

Dimmer insert for ohmic loadAC 230 VFor incandescent lamps and 230 V halogen lamps.With pressure-operated two-way switch.(Phase control).




60-400 W 572499 1/72 8 disc.60-600 W, halogen 500 W

572299 1/72 8.5 disc.

LV halogen dimmer insert for inductive loadAC 230 VFor dimmable, wound transformers and incan-descent lamps (inductive/ohmic load).With pressure-operated two-way switch.(Phase control).




20-500 VA 572599 1/72 8.5 disc.

ET dimmer insert for capacitive loadAC 230 VFor electronic transformers (MET and other brands) and incandescent lamps (ohmic load).With pressure-operated two-way switch.(Phase alignment)Noise-free, short-circuit-proof, with overload pro-tection, and soft start function to protect the lamps.




20-315 W 577199 1/50 8.5 disc.





572999 1/50 8 disc.

Dimmer insert for inductive loadAC 230 VFor dimmable wound transformers, motors, incandescent lamps and fluorescent lamps (inductive/ohmic load).With pressure-operated two-way switch and addi-tional switch contact.(Phase control).In conjunction with the base load of the speed controller, this can be used as a dimmer for argon fluorescent lamps (Ø 38 mm) and as a dimmer in circuits with automatic mains disconnection.

Connected load: 600 W incandescent lamps, 500 W halogen lamps, 500 VA dimmable, wound transformers

˜ To be completed with: Central plate for rotary dimmer inserts, art. no. System M 5670.., 5699..,5399.., System Basis 5723.., System Design 5720.., OCTOCOLOR 5726...Accessories: Base load, art. no. 542894.



25-600 VA 573299 1/50 8 disc.



542894 1/48 8 disc.

ww

w.m

erte

n.co

m


Dimmer system

D

352 DIMMER SYSTEM/TRANSFORMERS | Rotary dimmer up to 900 VA | ©2010

Central plate for rotary dimmer inserts up to 600 VAFor System M.

˜ To be completed with: Dimmer insert, art. no. 572199, 572499, 572299, 572599, 577199, 572999, 573299.


˜ Thermoplastic brilliantwhite, glossy 567044 5/120 8 disc.polar white, glossy 567019 5/120 8 disc.active white, glossy 567025 5/120 8 disc.

˜ Thermoplastic classy mattwhite 569944 5/120 8 disc.polar white 569919 5/120 8 disc.anthracite 569914 5/120 8 disc.aluminium 569960 5/120 8 disc.

˜ Duroplastic, highly scratch-resistantwhite 539944 5/120 8 disc.polar white 539919 5/120 8 disc.

Central plate for rotary dimmer inserts up to 600 VAFor System Design.

˜ To be completed with: Dimmer insert, art. no. 572199, 572499, 572299, 572599, 577199, 572999, 573299.


˜ Thermoplastic brilliantpolar white 572019 10/120 8 disc.light grey 572029 5/120 8 disc.dark brazil 572015 5/120 8 disc.black grey 572069 5/120 8 disc.aluminium 572060 5/120 8 disc.

˜ metallicantique brass 572043 5/120 8 disc.stainless steel 572046 5/120 8 disc.

˜ Duroplastic, highly scratch-resistantwhite 572094 5/120 8 disc.polar white 572099 5/120 8 disc.



˜ To be completed with: Universal rotary dimmer insert, MEG5138-0000, MEG5139-0000. Rotary dimmer insert for ohmic load with pressure-operated on/off switch, MEG5131-0000. Rotary dimmer insert for ohmic load with pressure-operated two-way switch, MEG5132-0000. Rotary dimmer insert for inductive load, MEG5133-0000, MEG5135-0000. Rotary dimmer insert for capac-itive load, MEG5136-0000, MEG5137-0000. Electronic potentiom-eter insert 1-10 V, MEG5142-0000.To be completed with: Dimmer insert, art. no. 572199, 572499, 572299, 572599, 577199, 572999, 573299.




Rotary dimmer up to 900 VA


• The following applies to all types of dimmers: If the dimmers cannot dissipate sufficient heat (cavity walls, multiple combina-tions, surface-mounted combinations and built-in dimmers on DIN rails), the connected loads specified may not be exploited to the maximum.

Dimmer insert 900 W for ohmic loadAC 230 VFor incandescent lamps and 230 V halogen lamps.With pressure-operated two-way switch.(Phase control).

˜ To be completed with: Central plate for rotary dimmer inserts up to 1000 VA, art. no. System Design 5717.., OCTOCOLOR 5715...

– Technical Information— Note: Not to be combined with System Basis or System M.


75-900 W/halogen 700 W

572799 1/30 8 disc.


ww

w.m

erte

n.co

m

Dimmer system

D

©2010 | Double touch dimmer | DIMMER SYSTEM/TRANSFORMERS 353

Central plate for rotary dimmer inserts up to 1000 VAFor System Design.

˜ To be completed with: Dimmer insert, 900 W, for ohmic load, art. no. 572799.


˜ Thermoplastic brilliantwhite 571744 1/100 8 disc.polar white 571719 1/100 8 disc.light grey 571729 1/100 8 disc.dark brazil 571715 1/100 8 disc.black grey 571769 1/100 8 disc.aluminium 571760 1/100 8 disc.

˜ metallicvarnished antique brass

571743 1/100 8 disc.

varnished stainless steel

571746 1/100 8 disc.


˜ To be completed with: Dimmer insert, 900 W, for ohmic load, art. no. 572799.


˜ Thermoplastic brilliantwhite 571544 1/100 8 disc.polar white 571519 1/100 8 disc.

Double touch dimmer

Universal dimmer insert, 2-gangAC 230 V, 50-60 HzFor ohmic, inductive and capacitive loads, e.g. incandescent lamps, dimmable wound transform-ers and electronic transformers.(Phase control or phase alignment).The universal dimmer automatically recognises the connected load. Do not connect any mixed loads.With memory function, can be switched off.

Neutral conductor:not required (2 conductor sys-tem)Nominal power/per channel: 50-200 W/VA

˜ To be completed with: Push-button module, 2-gang, art. no. Sys-tem M 568499, System Design 568199. Rockers for 2-gang push-button module, art. no. System M 6192.., 6252.., System Design 6262...Extension unit operation: With mechanical push-buttons. With extension insert, art. no. 573999, extension TELE insert, art. no. 573998.



2 x 50-200 VA 568099 1/50 8

Push-button module, 2-gangFor System M.Push-button module without rockers.The push-button module is inserted onto the 2-gang universal dimmer insert (art. no. 568099), and is used together with the rockers for the 2-gang push-button module in the matching design.

˜ To be completed with: Universal dimmer insert, 2-gang, art. no. 568099. Rockers for 2-gang push-button module, art. no. System M 6192.., 6252...


568499 1/100 8

Rockers for 2-gang push-button moduleFor System M.The rockers are attached to the 2-gang push-but-ton module.

˜ To be completed with: Push-button module, 2-gang, art. no. Sys-tem M 568499.In KNX, to be completed with: KNX push-button module, 2-gang, art. no. System M 625299.Accessories: Protective hood for plaster, System M, art. no. 627591...




Push-button module, 2-gangFor System DesignPush-button module without rockers.The push-button module is inserted onto the 2-gang universal dimmer insert (art. no. 568099), and is used together with the rockers for the 2-gang push-button module in the matching design.

˜ To be completed with: Universal dimmer insert, 2-gang, art. no. 568099. Rockers for 2-gang push-button module, art. no. System Design 6262...


568199 1/100 8

ww

w.m

erte

n.co

m


Dimmer system

D

354 DIMMER SYSTEM/TRANSFORMERS | Button dimmer | ©2010

– Technical Information: Dimmer basics; Dimmer and load types; Sensor cover functions and device overview; TRANCENT functions and device overview

Rockers for 2-gang push-button moduleFor System Design.The rockers are attached to the 2-gang push-but-ton module.

˜ To be completed with: Push-button module, 2-gang, art. no. Sys-tem Design 568199.In KNX, to be completed with: KNX push-button module, 2-gang, System Design 626299.Accessories: Protective hood for plaster, System Design, art. no. 628091...




626246 1/150 9

Button dimmer

• Memory: When the light is switched on, it has the last set bright-ness level.

• Interference immunity in line with VDE 0639.







25-420 VA 577099 1/50 8

Memory super dimmer insert for ohmic loadAC 230 VFor incandescent lamps and 230 V halogen lamps.(Phase control)With memory function, can be switched off.




60-400 W 573399 1/60 860-600 W, halogen 500 W

577299 1/60 8

Memory halogen super dimmer insert for inductive loadAC 230 VFor dimmable, wound transformers and incan-descent lamps (inductive/ohmic load).(Phase control)With memory function, can be switched off.




20-500 VA 573599 1/60 8


ww

w.m

erte

n.co

m

Dimmer system

D

©2010 | Contact switch | DIMMER SYSTEM/TRANSFORMERS 355

– Technical Information: Sensor cover functions and device over-view; TRANCENT functions and device overview

Memory ET super dimmer insert for capacitive loadAC 230 VFor electronic transformers (MET and other brands) and incandescent lamps (ohmic load).(Phase alignment)Noise-free, short-circuit-proof, with overload pro-tection, and soft start function to protect the lamps. With memory function, can be switched off.

˜ To be completed with: Sensor cover, art. no. System M 5776.., 5701.., 5704.., System Basis 5741.., System Design 5737.., OCTO-COLOR 5742.., AQUADESIGN 5738... TELE sensor cover, art. no. System M 5779.., 5703.., 5711.., System Basis 5748.., System Design 5709.., OCTOCOLOR 5749... In the TRANCENT range with control electronics, 1-gang, art. no. 569090 and TRANCENT glass sensor covers, art. no. 5691.., 5692.., 5693.., 5695...Extension unit operation: With mechanical push-buttons. With universal relay insert, art. no. 575897, with preset push-button function.



20-315 W 577899 1/60 8

Contact switch



˜ To be completed with: Sensor cover, art. no. System M 5776.., 5701.., 5704.., System Basis 5741.., System Design 5737.., OCTO-COLOR 5742.. or TELE sensor cover, art. no. System M 5779.., 5703.., 5711.., System Basis 5748.., System Design 5709.., OCTO-COLOR 5749... In the TRANCENT range with control electronics, 1-gang, art. no. 569090 and TRANCENT glass sensor covers, art. no. 5691.., 5692.., 5693.., 5695...Extension unit operation: With mechanical push-buttons. With extension insert, art. no. 573999, extension TELE insert, art. no. 573998.

– Technical Information— Note: The electronic switch insert, cannot be used in conjunction



25-400 W 575799 1/50 8

Electronic push-button insertAC 230 VPulse generator for surge switches or protective circuits.The switching function is determined by the surge switch or protective circuit used.

Connected load: 4-100 VASwitching current: 10-500 mAPulse duration: approx. 40 msNeutral conductor: not required (2 conductor system)




4-100 VA 574697 1/60 8

Relay universal insertAC 230 VFor ohmic, inductive and capacitive loads such as incandescent lamps, energy-saving lamps, LV hal-ogen lighting with conventional transformer, elec-tronic transformers, fluorescent lamps.Neutral conductor required.Functions:• Push-button function: switched on as long as

the push-button is touched, max. 1 minute• Switching function: ON/OFF• Time function: 5 s to 1 h

Connected load: max. 1000 W/VA,500 VA for LV halogen lamps with conventional transformer,max. 140 µF capacitive load




max. 1000 W/VA 575897 1/50 8

ww

w.m

erte

n.co

m


Dimmer system

D

356 DIMMER SYSTEM/TRANSFORMERS | Extension inserts | ©2010







40-300 W 576799 1/50 8






0-1000 VA 576897 1/50 8

– Technical Information: Sensor cover functions and device over-view

Extension inserts





573999 1/60 8





573998 1/60 8


ww

w.m

erte

n.co

m

Dimmer system

D

©2010 | Touch sensor surfaces (switching/dimming) | DIMMER SYSTEM/TRANSFORMERS 357

– Technical Information: Electronic/relay switch

Touch sensor surfaces (switching/dimming)

Sensor coverFor System M.Manual operation.With short-stroke key.

˜ To be completed with: Super dimmer insert, art. no. 577099, 573399, 577299, 573599, 577899. Electronic switch insert, art. no. 575799, 574697. Universal relay insert, art. no. 575897. Extension insert, art. no. 573999.





˜ Duroplastic, highly scratch-resistantwhite 570444 1/100 8polar white 570419 1/100 8

Sensor coverFor System Design.Manual operation.With short-stroke key.




˜ Thermoplastic brilliantwhite 573744 1/100 8polar white 573719 1/100 8light grey 573729 1/100 8dark brazil 573715 1/100 8black grey 573769 1/100 8aluminium 573760 1/100 8

˜ metallicantique brass 573743 1/100 8stainless steel 573746 1/100 8

Sensor coverFor OCTOCOLOR.Manual operation.






Sensor coverFor AQUADESIGN.Manual operation.With short-stroke key.




white 573844 1/100 8polar white 573819 1/100 8dark brazil 573815 1/100 8anthracite 573814 1/100 8aluminium 573860 1/100 8

TELE sensor coverFor System M.Can be manually operated and controlled remotely via IR remote control.With short-stroke key.

˜ To be completed with: Super dimmer insert, art. no. 577099, 573399, 577299, 573599, 577899. Electronic switch insert, art. no. 575799, 574697. Universal relay insert, art. no. 575897. Extension TELE insert, art. no. 573998.Transmitter: IR remote control Distance, art. no. 570222.





˜ Duroplastic, highly scratch-resistantwhite 571144 1/100 8polar white 571119 1/100 8

ww

w.m

erte

n.co

m


Dimmer system

D

358 DIMMER SYSTEM/TRANSFORMERS | Touch sensor surfaces (switching/dimming) | ©2010

TELE sensor coverFor System Design.Can be manually operated and controlled remotely via IR remote control.With short-stroke key.






TELE sensor coverFor OCTOCOLOR.Can be manually operated and controlled remotely via IR remote control.






CONNECT radio sensor cover for dimmer insertsFor System M.Operator button to toggle or switch/dim an out-put. Manual operation and remote control possi-ble via Merten CONNECT radio system transmitters.Radio features: Router








CONNECT radio sensor cover for dimmer insertsFor System Design.Operator button to toggle or switch/dim an out-put. Manual operation and remote control possi-ble via Merten CONNECT radio system transmitters.Radio features: Router







504646 1/100 8


ww

w.m

erte

n.co

m

Dimmer system

D

©2010 | Power boosters | DIMMER SYSTEM/TRANSFORMERS 359

CONNECT radio sensor cover, for switch insertsFor System M.Operator button for switching an output. Manual operation and remote control possible via Merten CONNECT radio system transmitters. Radio features: Router








CONNECT radio sensor cover, for switch insertsFor System Design.Operator button for switching an output. Manual operation and remote control possible via Merten CONNECT radio system transmitters. Radio features: Router







504446 1/100 8


Power boosters

Power boosterAC 230 VFor power extension of memory super dimmers, TELE dimmers, incandescent and fluorescent lamp dimmers.The load must be evenly distributed across dim-mers and power boosters.(Phase control).




25-600 VA 574099 1/60 8

ET power booster for capacitive loadAC 230 VFor power extension of ET dimmers (art. no. 577199) or ET super dimmers (art. no. 577899).The load must be evenly distributed across the ET dimmer and the ET power booster.(Phase alignment).




20-315 W 577399 1/60 8

Built-in power boosterAC 230 VFor power extension of memory super dimmers, TELE dimmers, incandescent and fluorescent lamp dimmers.The load must be evenly distributed across dim-mers and power boosters.(Phase control).



25-500 VA, light grey 574029 1/50 8

ww

w.m

erte

n.co

m


Dimmer system

D

360 DIMMER SYSTEM/TRANSFORMERS | Control units 1-10 V | ©2010


Control units 1-10 V

Control unit 1-10 VAC 230 VFor controlling electronic ballasts and system compatible devices with 1-10 V interface.Soft start function to protect the lamps. Memory function that can be switched off.

Switch contact: for switching the electronic bal-lasts/transformers etc.Nominal current:10 A, cos = 0,5Capacitive load: AC 230 V, max. 140 µF1-10V interface: for dimming the electronic bal-lasts/transformers etc.Voltage range: DC 1-10 VOutput current: max. 100 mADimensions: 180 x 34 x 49 mm (WxHxD)Diagonal size: 55 mm

˜ Extension unit operation: With mechanical push-buttons (make contact). With max. 10 extension inserts, art. no. 573999, exten-sion TELE inserts, art. no. 573998.



polar white 577794 1/40 8.1





572999 1/50 8 disc.

Rotary dimmers

Surface-mounted dimmer for ohmic loadAC 230 VFor incandescent lamps and 230 V halogen lamps.With pressure-operated two-way switch.(Phase control).Closed base.

– Technical Information— Contents: Complete device with cable and mini-trunking entry (15

mm).


60-400 W, polar white

573419 1/72 8 disc.

60-400 W, dark brazil 573417 1/72 8 disc.60-400 W, white 573444 1/72 8 disc.


Surface-mounted dimmer for ohmic loadAC 230 VFor incandescent lamps and 230 V halogen lamps.With pressure-operated two-way switch.(Phase control).Closed base.

– Technical Information— Contents: Complete device with cable and mini-trunking entry (15

mm).


60-600 W, halogen 500 W, polar white

571619 1/72 8 disc.

60-600 W, halogen 500 W, dark brazil

571617 1/72 8 disc.

60-600 W, halogen 500 W, white

571644 1/72 8 disc.

DIN rail mounted rotary dimmers

• For installation in the distribution board on 35 mm DIN rail in accordance with DIN EN 50022.

• Device width: 35 mm = 3 modules.• Interference immunity in line with VDE 0639.

Built-in dimmer for ohmic loadAC 230 VFor incandescent lamps and 230 V halogen lamps.With pressure-operated two-way switch.(Phase control).



60-500 W, light grey 571829 1/72 8

Built-in LV halogen dimmer for inductive loadAC 230 VFor dimmable, wound transformers and incan-descent lamps (inductive/ohmic load).With pressure-operated two-way switch.(Phase control).



20-500 VA, light grey 572529 1/72 8


ww

w.m

erte

n.co

m

Dimmer system

D

©2010 | DIN rail mounted dimmers | DIMMER SYSTEM/TRANSFORMERS 361


Built-in ET dimmer for capacitive loadAC 230 VFor electronic transformers (MET and other brands) and incandescent lamps (ohmic load).With pressure-operated two-way switch.(Phase alignment)Noise-free, short-circuit-proof, with overload pro-tection, and soft start function to protect the lamps.



20-280 W, light grey 577129 1/50 8

DIN rail mounted dimmers

Universal dimmer REG/230/500 WAC 230 V, 50-60 HzFor ohmic, inductive and capacitive loads, e.g. incandescent lamps, dimmable wound transform-ers and electronic transformers.(Phase control or phase alignment).The universal dimmer automatically recognises the connected load. Combinations of ohmic and inductive, or ohmic and capacitive loads can also be connected. Combinations of inductive and capacitive loads cannot be connected. With short-circuit, open-circuit and excess tempera-ture protection with soft start lamp protection.Manual operation and extension unit operation.For installation onto DIN rails EN 50022.With memory function, can be switched off.

Nominal voltage: AC 220 - 230 V, 50/60 HzNominal power: max. 500 W/VA25 W minimum load (ohmic)50 VA minimum load (ohmic/inductive/capaci-tive)Input (extension unit operation): AC 230 V, 50/60 Hz (same phase as the dimming channel)Device width: 4 modules = approx. 72 mm

˜ Extension unit operation: With mechanical push-buttons (make contact). With extension insert, art. no. 573999, extension TELE insert, art. no. 573998.



light grey 571950 1/10 8

Universal dimmer REG/2x230/300 WAC 230 V, 50-60 HzFor ohmic, inductive and capacitive loads, e.g. incandescent lamps, dimmable wound transform-ers and electronic transformers.(Phase control or phase alignment).The universal dimmer automatically recognises the connected load. Combinations of ohmic and inductive, or ohmic and capacitive loads can also be connected. Combinations of inductive and capacitive loads cannot be connected. With short-circuit, open-circuit and excess tempera-ture protection with soft start lamp protection.Manual operation and extension unit operation.For installation onto DIN rails EN 50022.With memory function, can be switched off.

Nominal voltage: AC 220 - 230 V, 50/60 HzNominal power/channel: max. 300 W/VA25 W minimum load (ohmic)50 VA minimum load (ohmic/inductive/capaci-tive)Input (extension unit operation): AC 230 V, 50/60 Hz (same phase as the dimming channel)Device width: 4 modules = approx. 72 mm




light grey 571930 1/10 8

Universal dimmer REG/4x230/150 WAC 230 V, 50-60 HzFor ohmic, inductive and capacitive loads, e.g. incandescent lamps, dimmable wound transform-ers and electronic transformers.(Phase control or phase alignment).The universal dimmer automatically recognises the connected load. Combinations of ohmic and inductive, or ohmic and capacitive loads can also be connected. Combinations of inductive and capacitive loads cannot be connected. With short-circuit, open-circuit and excess tempera-ture protection with soft start lamp protection.Manual operation and extension unit operation.For installation onto DIN rails EN 50022.With memory function, can be switched off.





light grey 571915 1/10 8

ww

w.m

erte

n.co

m


Dimmer system

D

362 DIMMER SYSTEM/TRANSFORMERS | DIN rail mounted memory super dimmers | ©2010


DIN rail mounted memory super dimmers

• Memory: When the light is switched on, it has the last set bright-ness level.

• For installation in the distribution board on 35 mm DIN rail in accordance with DIN EN 50022.

• Device width: 35 mm = 3 modules.• Interference immunity in line with VDE 0639.

Built-in memory halogen super dimmer for inductive loadAC 230 VFor dimmable, wound transformers and incan-descent lamps (inductive/ohmic load).(Phase control)With memory function, can be switched off.

˜ Extension unit operation: With mechanical push-buttons. With extension insert, art. no. 573999, extension TELE insert, art. no. 573998.



20-500 VA, light grey 573529 1/50 8

Built-in memory ET super dimmer for capacitive loadAC 230 VFor electronic transformers (MET and other brands) and incandescent lamps (ohmic load).(Phase alignment)Noise-free, short-circuit-proof, with overload pro-tection, and soft start function to protect the lamps. With memory function, can be switched off.

˜ Extension unit operation: With mechanical push-buttons. With universal relay insert, art. no. 575897, with preset push-button function.



20-280 W, light grey 577829 1/50 8

Remote controls

• IR remote controls can be combined with TELE sensor covers from all ranges.






black 570222 1/48 8


ww

w.m

erte

n.co

m

Dimmer system

D

©2010 | Electronic transformers/low voltage halogen systems MET B | DIMMER SYSTEM/TRANSFORMERS 363















– Technical Information: MET B

Electronic transformers/low voltage halogen systems MET B

Electronic transformer 105 WAC 230 VDimmable with ET dimmer.(Phase alignment).No built-in fuse because short-circuit-proof in secondary circuit. With overload protection, ther-mal protection, soft start function.

Output voltage: AC 12 VProtection class: IICable length: max. 2 m in secondary circuit (in line with VDE)Colour: Polar whiteDimensions: 180 x 34 x 49 mm (WxHxD)Diagonal size: 55 mm




577796 1/40 8.1

Electronic transformer 200 WAC 230 VDimmable with ET dimmer.(Phase alignment)No built-in fuse because short-circuit-proof in secondary circuit. With overload protection, soft start function.





577791 1/24 8.1

ww

w.m

erte

n.co

m


Dimmer system

D

364 DIMMER SYSTEM/TRANSFORMERS | Electronic transformers/low voltage halogen systems MET D | ©2010

– Technical Information: MET D

Electronic transformers/low voltage halogen systems MET D

Electronic transformer with inte-grated dimmer 105 WAC 230 VElectronic transformer with integrated phase alignment dimmer.A power extension is possible with electronic transformers, art. no. 577797, up to approx. 1700 W total connected load (in line with TAB).No built-in fuse because short-circuit-proof in secondary circuit. With overload protection, ther-mal protection, soft start function. The memory function can be switched off.






577798 1/40 8.1

Electronic transformer for power extension 105 WAC 230 VElectronic transformer, for power extension of MET D transformers with integrated dimmer (art. no. 577798) can be used.Dimmable with ET dimmer or electronic trans-former with integrated dimmer.No built-in fuse because short-circuit-proof in secondary circuit. With overload protection, ther-mal protection, soft start function.





577797 1/40 8.1

– Technical Information: MET D

Control inserts for MET D

Push-button insert make contact 1 poleWith claw and screw fixing.



˜ plug-in terminals10 A, 250 V AC MEG3150-0000 10/60 1.8 new


Double push-button insert two-way 1 poleWith claw and screw fixing.




Push-button insert two-way 1 poleWith claw and screw fixing.






ww

w.m

erte

n.co

m

Dimmer system

D

©2010 | Accessories | DIMMER SYSTEM/TRANSFORMERS 365





573999 1/60 8





573998 1/60 8

Accessories

Surge protection moduleAC 230 V, +6 % / -10 %For electronic transformers MET and ET dimmers.For protecting the transformer or dimmer during parallel operation of fluorescent lamps and other inductive loads with transformers.Connection parallel to the input side of the trans-former or dimmer. 1 module for max. 10 trans-formers per circuit is recommended.

Leakage current: (8/20) 4.5 kA (1x), 1 kA (100x)Residual voltage at discharge current: (1 kA) approx. 1000 V


552119 1/150 8

6-gang distribution boardFor secondary wiring of LV halogen lighting, with six double plug-in contacts (up to 2.5 mm2) and incoming cable to the secondary side of the transformer.

Input voltage level Ueff 42 VOutput currents leff 17 A for the input (approx. 200 W at 12 V)leff 8.5 A per junction box (approx. 100 W at 12 V)


552019 1/60 8



542894 1/48 8 disc.

366

ww

w.m

erte

n.de

Blind control system | ©2010

intelliGent control WitH HiGH comFortBlind control system


The blind control system can be oper-

ated with just one push of a button for

individual control as well as central/

group control. Sensors for sun and

wind protection and twilight functions

can also be incorporated for added

convenience.

Central and group control

The inserts can be installed and inter-

connected to enable simple central or

group control. Whether in private

homes or at the office: the system

ensures ease of operation.

Blind time switch

Safety even when you're gone: the

time switch, the random generator,

and the switch from winter to summer

time are just a few of the many addi-

tional functions that provide the

utmost in safety and technology.

example: central and Group control


367

ww

w.m

erte

n.de

©2010 | Blind control system

contents

Blind push-button

Blind time switch



368

ww

w.m

erte

n.de

Blind control system | ©2010


ww

w.m

erte

n.co

m

BLIND CONTROL SYSTEM


C

368 BLIND CONTROL SYSTEM | ©2010

Blind control systemBlind control systemSystem electronicsBlind control systemBlind control systemC


Function Design cover inserts

■ For a blind/roller shutter motor with limit switch

■ Individual control

■ For a blind/roller shutter motor with limit switch

■ Individual control ■ Extension input for group/central control

■ Wind monitoring function can be implemented

■ Sensor for suction fixing on the window

■ Brightness measurement

580698 580699 580691

Standard blind control insert Blind control insert with extension input

Sun/twilight sensor

(max. 1 motor 1000 VA); Neutral conductor required

(max. 1 motor 1000 VA); Neutral conductor required

Cable length 2 m

Blind push-button

■ Manual operation ■ Slat adjustment

Blind push-button

System MSystem DesignSystem BasisOCTOCOLOR

5877.., 5862..5842..5802..5822..

■ Manual operation ■ Slat adjustment ■ Sun protection function

Blind push-button with sensor connection


5878.., 5865..5845..5805..5825..

■ Manual operation ■ Slat adjustment ■ Sun protection function ■ Memory function for automatic opera-tion of drive at saved times

Blind push-button with memory function and sensor connection


5879.., 5863..5843..5803..5823..

■ Manual operation ■ Slat adjustment ■ Sun protection function ■ Can be remote controlled via infrared (remote control art. no. 570222)

Blind push-button with IR receiver and sensor connection


5880.., 5864..5844..5804..5824..

■ Manual operation ■ Sun protection function ■ Can be remote-controlled via transmit-ters of the CONNECT radio system

CONNECT radio roller shutter push-button with sensor connection

System MSystem Design

5035.., 5025..5045..

Blind time switch

■ Manual operation ■ Slat adjustment ■ Clock function programmable with time block: Mon-Fri: (1 x raising, 1 x lowering time) Sat. - Sun. (1 x raising, 1 x lowering time)

Blind time switch standard

Extension input inoperable (no central/group control is

possible)


5814.., 5819..5859..5809..5839..

■ Manual operation ■ Slat adjustment ■ Clock function for complex switching ranges

■ Astro function for automatically adjusting switching times according to the time of the year

■ Random function

Blind time switch


5815.., 5861..5841..5801..5821..

■ Manual operation ■ Slat adjustment ■ Clock function for complex switching ranges

■ Astro function for automatically adjusting switching times according to the time of the year

■ Random function ■ Sun protection/twilight functions

Blind time switch with sensor connection


5816.., 5867..5851..5811..5831..

Wind monitoring unit

■ The wind monitoring unit enables the blinds to be raised or lowered depend-ing on the wind strength

Wind sensor interface580693 (with wind sensor 580690 or 580692)

via extension input


ww

w.m

erte

n.co

m


C

©2010 | Inserts | BLIND CONTROL SYSTEM 369

Blind control systemBlind control systemSystem electronicsBlind control systemBlind control systemC

– Technical Information: Blind control system

– Technical Information: Blind control system functions and device overview

Inserts






1000 VA 580698 1/50 8







1000 VA 580699 1/50 8





576399 1/24 8







576398 1/100 8

ww

w.m

erte

n.co

m



C

370 BLIND CONTROL SYSTEM | Blind push-button | ©2010


Multiple control relay for roller shutters REG2 A, AC 250 VFor installation on DIN rails. For controlling up to 2 roller shutter motors locally, in groups or centrally. With separation of load and control circuit, as well as forced locking in both directions of movement.Motors are controlled individually using a roller shutter rocker switch and centrally using the blind time switches or blind push-buttons of the Merten blind control system.

Mains voltage: AC 230 V, 50 Hz ±10 %Power consumption: 10 mA in relay operationSwitching voltage: max. AC 250 VSwitching current: max. 2 ATemperature range: 0 -60 °CTerminals: max. 1.5 mm2

Device width: 2 modules = approx. 36 mm



576397 1/40 8

Blind push-button

Blind push-buttonFor System M.Operator button for blind/roller shutter motors. With electronic locking of blind control.

Push-button action < 1s: Stop or inching mode for slat adjustment.Push-button action > 1s: Permanent movement of blind/roller shutters (self-locking).

˜ To be completed with: Blind control insert, art. no. 580698, 580699.






Blind push-buttonFor System Design.Operator button for blind/roller shutter motors. With electronic locking of blind control.







Blind push-buttonFor OCTOCOLOR.Operator button for blind/roller shutter motors. With electronic locking of blind control.






˜ metallicvarnished bronze metallic

582242 1/100 8

varnished titanium 582205 1/100 8


ww

w.m

erte

n.co

m


C

©2010 | Blind push-button with sensor connection | BLIND CONTROL SYSTEM 371


Blind push-button with sensor connection

Blind push-button with sensor connectionFor System M.Operator button for blind/roller shutter motors. With electronic locking of blind control.Possible to connect sun sensor. A screw terminal on the blind control insert con-nects the sensor cable with the blind push-but-ton. Brightness value of sun sensor set to approx. 20,000 lux.


˜ To be completed with: Blind control insert, art. no. 580698, 580699.Accessories: Sun/twilight sensor, art. no. 580691.






Blind push-button with sensor connectionFor System Design.Operator button for blind/roller shutter motors. With electronic locking of blind control.Possible to connect sun sensor. A screw terminal on the blind control insert con-nects the sensor cable with the blind push-but-ton. Brightness value of sun sensor set to approx. 20,000 lux.







Blind push-button with sensor connectionFor OCTOCOLOR.Operator button for blind/roller shutter motors. With electronic locking of blind control.Possible to connect sun sensor. A screw terminal on the blind control insert con-nects the sensor cable with the blind push-but-ton. Brightness value of sun sensor set to approx. 20,000 lux.





˜ Thermoplastic brilliantwhite 582544 1/100 8polar white 582519 1/100 8varnished bronze metallic

582542 1/100 8


ww

w.m

erte

n.co

m



C

372 BLIND CONTROL SYSTEM | Blind push-button with memory function and sensor connection | ©2010


Blind push-button with memory function and sensor connection

Blind push-button with memory function and sensor connectionFor System M.Operator button for blind/roller shutter motors. With electronic locking of blind control.Possible to connect sun sensor.The device uses a a memory function for the pur-pose of presence simulation to save a time for opening and a time for closing the blinds. Which are then repeated every 24 hours. The memory function can be switched on and off at any time. The times are saved by keeping the corresponding direction key pressed down (2 s). A screw terminal on the blind control insert con-nects the sensor cable with the blind push-but-ton. Brightness value of sun sensor set to approx. 20,000 lux.








Blind push-button with memory function and sensor connectionFor System Design.Operator button for blind/roller shutter motors. With electronic locking of blind control.Possible to connect sun sensor.The device uses a a memory function for the pur-pose of presence simulation to save a time for opening and a time for closing the blinds. Which are then repeated every 24 hours. The memory function can be switched on and off at any time. The times are saved by keeping the corresponding direction key pressed down (2 s). A screw terminal on the blind control insert con-nects the sensor cable with the blind push-but-ton. Brightness value of sun sensor set to approx. 20,000 lux.








ww

w.m

erte

n.co

m


C

©2010 | Blind push-button with IR receiver and sensor connection | BLIND CONTROL SYSTEM 373

Blind push-button with memory function and sensor connectionFor OCTOCOLOR.Operator button for blind/roller shutter motors. With electronic locking of blind control.Possible to connect sun sensor.The device uses a a memory function for the pur-pose of presence simulation to save a time for opening and a time for closing the blinds. Which are then repeated every 24 hours. The memory function can be switched on and off at any time. The times are saved by keeping the corresponding direction key pressed down (2 s). A screw terminal on the blind control insert con-nects the sensor cable with the blind push-but-ton. Brightness value of sun sensor set to approx. 20,000 lux.







582342 1/100 8



Blind push-button with IR receiver and sensor connection

Blind push-button with IR receiver and sensor connectionFor System M.Operator button for blind/roller shutter motors. Can be manually operated and controlled remotely via IR remote control. With electronic locking of blind control.Possible to connect sun sensor. A screw terminal on the blind control insert con-nects the sensor cable with the blind push-but-ton. Brightness value of sun sensor set to approx. 20,000 lux.


˜ To be completed with: Blind control insert, art. no. 580698, 580699.Accessories: Sun/twilight sensor, art. no. 580691.Transmitter: IR remote control Distance, art. no. 570222.






ww

w.m

erte

n.co

m



C

374 BLIND CONTROL SYSTEM | CONNECT roller shutter push-button with sensor connection | ©2010

Blind push-button with IR receiver and sensor connectionFor System Design.Operator button for blind/roller shutter motors. Can be manually operated and controlled remotely via IR remote control. With electronic locking of blind control.Possible to connect sun sensor. A screw terminal on the blind control insert con-nects the sensor cable with the blind push-but-ton. Brightness value of sun sensor set to approx. 20,000 lux.







Blind push-button with IR receiver and sensor connectionFor OCTOCOLOR.Operator button for blind/roller shutter motors. Can be manually operated and controlled remotely via IR remote control. With electronic locking of blind control.Possible to connect sun sensor. A screw terminal on the blind control insert con-nects the sensor cable with the blind push-but-ton. Brightness value of sun sensor set to approx. 20,000 lux.







582442 1/60 8



CONNECT roller shutter push-button with sensor connection

CONNECT radio roller shutter push-button with sensor connec-tionFor System M.Operating button for roller shutter motors. Man-ual operation and remote control possible via Merten CONNECT radio system transmitters. With electronic locking device.Possible to connect sun/twilight sensor. Radio features: RouterA screw terminal on the blind control insert con-nects the sensor cable with the roller shutter push-button. Brightness value of sun sensor set to approx. 20000 lux.



duration







ww

w.m

erte

n.co

m


C

©2010 | Standard blind time switch | BLIND CONTROL SYSTEM 375

CONNECT radio roller shutter push-button with sensor connec-tionFor System Design.Operating button for roller shutter motors. Man-ual operation and remote control possible via Merten CONNECT radio system transmitters. With electronic locking device.Possible to connect sun/twilight sensor. Radio features: RouterA screw terminal on the blind control insert con-nects the sensor cable with the roller shutter push-button. Brightness value of sun sensor set to approx. 20000 lux.



duration





504546 1/60 8


Standard blind time switch

Standard blind time switchFor System M.For programmed and time-dependent switching of blind/roller shutter motors.Functions:• 4 push-button operation• Pre-set switching times• Time block Mon-Fri: 1xup, 1xdown time can be

programmed• Time block Sat-Sun: 1xup, 1xdown time can be

programmed• Quick programming function• Programming possible without flush-mounted

insert• Reserve power up to 6 hours (without battery)• Reset to restore factory settings• Manual operation possible at any time

Reversing time on change in direction: min. 1 secondAccuracy: ±1 min. per month


– Technical Information— Note: In combination with the blind control insert and extension

input, art. no. 580699, the extension input does not work.



˜ Thermoplastic classy mattwhite 581944 1/10 8polar white 581919 1/10 8anthracite 581914 1/10 8 newaluminium 581960 1/10 8 new


ww

w.m

erte

n.co

m



C

376 BLIND CONTROL SYSTEM | Standard blind time switch | ©2010

Standard blind time switchFor System Design.For programmed and time-dependent switching of blind/roller shutter motors.Functions:• 4 push-button operation• Pre-set switching times• Time block Mon-Fri: 1xup, 1xdown time can be











585946 1/10 8

Standard blind time switchFor OCTOCOLOR.For programmed and time-dependent switching of blind/roller shutter motors.Functions:• 4 push-button operation• Pre-set switching times• Time block Mon-Fri: 1xup, 1xdown time can be











583942 1/10 8



ww

w.m

erte

n.co

m


C

©2010 | Comfort blind time switch | BLIND CONTROL SYSTEM 377


Comfort blind time switch

Blind time switchFor System M.For programmed and time-dependent switching of blind/roller shutter motors.Functions:• 3 independent program memories• Pre-set switching times• 18 programmable switching times• Menu-controlled operation / programming • Reserve power up to 24 hours (without battery)• Reset to restore factory settings• Random-check generator can be activated (in

the range ± 15 mins)• Astro function (adjustment ± 2 hours)• Simple to switch from summer to winter time• Individual running time can be programmed• Manual operation possible at any time• Electronic locking of blind control







Blind time switchFor System Design.For programmed and time-dependent switching of blind/roller shutter motors.Functions:• 3 independent program memories• Pre-set switching times• 18 programmable switching times• Menu-controlled operation / programming • Reserve power up to 24 hours (without battery)• Reset to restore factory settings• Random-check generator can be activated (in






˜ metallicantique brass 584143 1/10 8varnished stainless steel

584146 1/10 8

Blind time switchFor OCTOCOLOR.For programmed and time-dependent switching of blind/roller shutter motors.Functions:• 3 independent program memories• Pre-set switching times• 18 programmable switching times• Menu-controlled operation / programming • Reserve power up to 24 hours (without battery)• Reset to restore factory settings• Random-check generator can be activated (in







582142 1/10 8


ww

w.m

erte

n.co

m



C

378 BLIND CONTROL SYSTEM | Comfort blind time switch | ©2010

Blind time switch with sensor con-nectionFor System M.For programmed and time-dependent switching of blind/roller shutter motors. Possible to connect sun/twilight sensor. The sensor cable is connected with the blind time switch via the plug.Functions:• 3 independent program memories• Pre-set switching times• 18 programmable switching times• Menu-controlled operation / programming • Reserve power up to 24 hours (without battery)• Reset to restore factory settings• Random-check generator can be activated (in

the range ± 15 mins)• Astro function (adjustment ± 2 hours)• Simple to switch from summer to winter time• Individual running time can be programmed• Manual operation possible at any time• Electrical interlock for blind control• Configurable brightness values for sun protec-

tion and twilight functions. The sun sensor can also be used as a twilight sensor.







Blind time switch with sensor con-nectionFor System Design.For programmed and time-dependent switching of blind/roller shutter motors. Possible to connect sun/twilight sensor. The sensor cable is connected with the blind time switch via the plug.Functions:• 3 independent program memories• Pre-set switching times• 18 programmable switching times• Menu-controlled operation / programming • Reserve power up to 24 hours (without battery)• Reset to restore factory settings• Random-check generator can be activated (in







˜ metallicantique brass 585143 1/10 8varnished stainless steel

585146 1/10 8


ww

w.m

erte

n.co

m


C

©2010 | Sensors | BLIND CONTROL SYSTEM 379

Blind time switch with sensor con-nectionFor OCTOCOLOR.For programmed and time-dependent switching of blind/roller shutter motors. Possible to connect sun/twilight sensor. The sensor cable is connected with the blind time switch via the plug.Functions:• 3 independent program memories• Pre-set switching times• 18 programmable switching times• Menu-controlled operation / programming • Reserve power up to 24 hours (without battery)• Reset to restore factory settings• Random-check generator can be activated (in








583142 1/10 8



Sensors

Sun/twilight sensorThe light sensor is attached to the window pane with the suction cup. Can be used either as a sun sensor or as a twilight sensor.The position of the sensor determines the start-ing point of the blind.

Connecting cable: 2 m / LIYY 2x0.14 mm2

˜ To be completed with: Blind push-button with sensor connection, art. no. System M 5878.., 5865.., System Basis 5805..,System Design 5845.., OCTOCOLOR 5825... Blind push-button with mem-ory function and sensor connection, art. no. System M 5879.., 5863.., System Basis 5803..,System Design 5843.., OCTOCOLOR 5823... Blind push-button with IR receiver and sensor connection, art. no. System M 5880.., 5864.., System Basis 5804..,System Design 5844.., OCTOCOLOR 5824... Blind push-button with radio receiver and sensor connection, art.no. System M 5936.., System Design 5935... Blind time switch with sensor connection, art. no. System M 5816.., 5867.., System Basis 5811..,System Design 5851.., OCTOCOLOR 5831...



2 m, polar white 580691 1/54 8

Wind sensorTo raise and protect the blinds depending on the wind force. The device is connected to the wind sensor inter-face.The wind sensor is installed on the roof or on the outside wall of the building and converts the measured wind speeds into electrical signals.

Type of protection: IP 65

˜ To be completed with: Wind sensor interface, art. no. 580693.– Technical Information— Contents: With fixing bracket.



Wind sensor with heatingWith integrated heating for trouble-free opera-tion in winter.To raise and protect the blinds depending on the wind force. The device is connected to the wind sensor inter-face.The wind sensor is installed on the roof or on the outside wall of the building and converts the measured wind speeds into electrical signals.


˜ To be completed with: Wind sensor interface, art. no. 580693. Separate power supply unit AC/DC 24 V/ 70 W

– Technical Information— Contents: With fixing bracket.



ww

w.m

erte

n.co

m



C

380 BLIND CONTROL SYSTEM | Remote controls | ©2010


Wind sensor interfaceAC 230 V, 50 HzEvaluation units for wind sensors / wind sensors with heating. For connection to the extension input of the blind control insert.Can also be connected to the Merten KNX via binary inputs.

Supply voltage: AC 230 V, 50 HzOutput: floating contact for the control of the blind control insertResponse time: approx. 15 sec. (after the selected wind strength has been exceeded) Overshoot time: approx. 15 min. (after the selected wind strength has not been reached)

˜ To be completed with: Wind sensor, art. no. 580692. Wind sensor with heating, art. no. 580690. Blind control insert with extension input, art. no. 580699.




Remote controls






black 570222 1/48 8
















ww

w.m

erte

n.co

m


C

©2010 | Remote controls | BLIND CONTROL SYSTEM 381

382

ww

w.m

erte

n.de

Building communications | Ritto TwinBus | ©2010

Building communicationsoPtimal comFoRt and sEcuRitY

Intelligent solutions in building

communications

Quality building communications: the

combination of Merten's switch design

and TwinBus technology by Ritto

provides optimal comfort and security.

From the TwinBus flush mounted

staircase intercom, to the TwinBus

flush-mounted intercom, and the

TwinBus flush-mounted video intercom

– all can be combined with System M's

42 extremely low-profile frames, which

enable over 280 different functions.

With the TwinBus technology, you can

easily develop a plan for your building

communications that is perfectly

adapted to your needs and both sturdy

and easy to install. An ideal solution

for single-family homes, office build-

ings, and housing complexes. With

KNX technology and USB interfaces,

the options are nearly infinite.

EasY installation

Building communication

383

ww

w.m

erte

n.de

©2010 | Ritto TwinBus | Building communications

contEntsBuilding communications

TwinBus video flush-mounted inter-

com in Merten switch design

TwinBus flush-mounted staircase door

intercom in Merten switch design

TwinBus flush-mounted inter-

com in Merten switch design

Extra slim hous-ing – only 16 mm installation height

Building communication

ww

w.m

erte

n.co

m

BUILDING COMMUNICATIONS / RITTO TWINBUS

Building communicatio

ns

R

384 BUILDING COMMUNICATIONS / RITTO TWINBUS | Components for Ritto TwinBus | ©2010

Building communicationsBuilding communications / Ritto TwinbusSystem electronicsBuilding communications / Ritto TwinbusBuilding communications / Ritto TwinbusR

– Technical Information: Building communications

Components for Ritto TwinBus

Flush-mounted video intercomFor TwinBus video intercom system with colour image.Voice and visual communication to the door sta-tion, and opening the main door and/or door to the individual floors.• Door opening key• Key for staircase light or call silencing• Call silencing: The door call signal is visualised.• Accept/end call• 1 freely configurable key for special function• Voice and call tone volume control in 8 levels• 8 call tones incl. 3-tone gong• Call activation relay/door opening mechanism• Call tone distinction for door/floor/internal• Switching the video image on/off• Camera selection, camera control• Disable to prevent others listening/viewing• Internal calls/8 switching commands (menu)• For use with up to 10 bell keys for door inter-

coms• Large wiring compartment• Low mounting height (16 mm)It is mounted on a conventional, flat, flush-mounted device box, DIN 49073, part 1.Supply voltage: 18-24 V DC from video network device 16477Interface: USB (preconfiguration)Output: 1, floating, 24V, 1A (for example, for external signal generator via call activation relay)Display: 2.0“ colour TFT, LED backlightOperating elements: Cursor keys, door opening key, key for staircase lighting/call silencing, accept/end call and special functionDimensions: 197x55 mm (HxW)

˜ To be completed with: Frame 3-gang without central bridge piece, art. no. 1-M 3899.., ATELIER-M 3889.., M-SMART 4789.., 4849.., M-ARC 4859.., M-STAR 4709.., 4769.., 4869.., M-PLAN 4889.., M-PLAN glass 4779.., M-PLAN metal frame 4759...

— Contents: TwinBus connecting terminal and videobus.Retaining ring and screws.


˜ Thermoplastic brilliantwhite, glossy 700144 1/12 8.9polar white, glossy 700119 1/12 8.9active white, glossy 700125 1/12 8.9

˜ Thermoplastic classy mattwhite 701144 1/12 8.9polar white 701119 1/12 8.9anthracite 701114 1/12 8.9aluminium 701160 1/12 8.9


Flush-mounted intercomFor TwinBus intercom system.Voice communication to the door station and opening the main door and/or door to the individ-ual floor.• Door opening key• Key for staircase light or call silencing• Call silencing: The door call signal is visual• Accept/end call• Voice and call tone volume control in 4 levels• 5 call tones• Call tone distinction for door/floor• Call connecting relay• Disable listening-in• For use with up to 10 bell keys for door inter-

coms• Large wiring compartment• Low mounting height (16 mm)It is mounted on a conventional, flat, flush-mounted device box, DIN 49073, part 1.Supply voltage: TwinBus from power supply unit 17573Power consumption in stand-by: max. 3 mAOperating elements: Door opening key, key for staircase lighting/call silencing, volume control, accept/end callDimensions: 126 x 55 mm (HxW)


— Contents: TwinBus connecting terminal.Retaining ring and screws.





BUILDING COMMUNICATIONS / RITTO TWINBUS

ww

w.m

erte

n.co

m

Building communicatio

ns

R

©2010 | Components for Ritto TwinBus | BUILDING COMMUNICATIONS / RITTO TWINBUS 385

Flush-mounted staircase door sta-tionFor TwinBus intercom systems with voice commu-nication to the intercoms.The door station is installed inside, in front of the floor door or apartment door.• Door bell key• Key for staircase timer, can be switched off• Volume for microphone and loudspeaker

adjustable• Large wiring compartment• Large nameplate, can be replaced from the

front• Low mounting height (16 mm)It is mounted on a conventional, flat, flush-mounted device box, DIN 49073, part 1.Supply voltage: TwinBus from power supply unit 17573Operating elements: Door bell key, key for stair-case lightingDimensions: 126 x 55 mm (HxW)


— Contents: TwinBus connecting terminal.Retaining ring and screws.





386

ww

w.m

erte

n.de

ARGUS SURfAce-moUnted movement detectoR | ©2010

The ARGUS movement detector is ideal

anywhere that on-demand lighting

control is needed, including entryways,

corridors, stairways, offices, public

buildings and terraces.

ARGUS surface-mounted movement

detectors

These well-designed movement detec-

tors ensure safety and convenience

outdoors. For example, entryways are

lighted on demand – ideal for greeting

visitors as well as for putting uninvited

guests into the spotlight, whether they

want to be or not.

The detectors sweep across a detection

angle from 70 to 360° to detect motion.

An optional radio network as well as

remote control setting and use make

operation even more convenient.

the beSt in All-RoUnd pRotectionARGUS SURfAce-moUnted movement detectoRS

ARGUS 220, remote control

aluminium

Convenience, function-

ality and safety are the

key elements to take

into account when

selecting building technology systems.

Energy efficiency is another important

criterion. Merten places a high priority

on developing sustainable products

and solutions in order to protect our

resources and the resources of future

generations.

By employing a movement and presence

detector, individual households can also

save energy and contribute to environ-

mental protection. Merten products

can easily and conveniently reduce

energy costs with lighting control, heat-

ing and multimedia control tailored to

your needs.

Movement detectors

387

ww

w.m

erte

n.de

©2010 | ARGUS SURfAce-moUnted movement detectoR

contentSARGUS SURfAce-moUnted movement detectoRS

ARGUS SURfAce-moUnted movement detectoRS: the RiGht SolUtion foR Any ApplicAtion

ARGUS 70

• For safety and security in the smallest of spaces• Angle of detection: 70°

7 m

ARGUS 220 | ARGUS 220 foR 12 v | ARGUS 220, Remote contRollAble

• with integrated interface for a radio module for networking

• Angle of detection: 220°• Sensitivity adjustable• 12 V Low voltage (ARGUS 220 for 12 V)• remote controllable (ARGUS 220, remote control)

28 m

16 m

• With integrated light-sensitive time switch, can be networked by radio

• Angle of detection: 220°

28 m

16 m

ARGUS 110 & 220 bASic

• The value-for-money basic models• Angle of detection:

110° (ARGUS 110 Basic) 220° (ARGUS 220 Basic)

110 Basic 220 Basic

24 m

12 m

24 m

12 m

ARGUS 300

• Monitors two house fronts simultaneously• Angle of detection: 300°

24 m

16 m

ARGUS 360

• For indoor and outdoor ceiling mounting• Angle of detection: 360°

20 m

32 m

KnX ARGUS 220

• for direct connection to KNX • Angle of detection: 220°

28 m

16 m

RAdio ARGUS 220 connect

• for networking of up to 4 movement detectors

• Angle of detection: 220°

28 m

16 m

Movement detectors

ww

w.m

erte

n.co

m

ARGUS SURFACE-MOUNTED MOVEMENT DETECTOR

Movement detectors

F

388 ARGUS SURFACE-MOUNTED MOVEMENT DETECTOR | ARGUS movement detector, standard | ©2010

Movement detectorsARGUS surface-mounted movement detectorSecurity electronicsMovement detectorsSurface-mounted movement detectorsARGUS surface-mounted movement detectorF

– Technical Information: Surface-mounted movement detector

ARGUS movement detector, standard

ARGUS 70 Electronic outdoor movement detector. 70° sur-face monitoring for smaller areas such as gate-ways, entrances or staircases.

Mains voltage: AC 230 V ±10 %, 50 HzConnected load: up to 500 VAMax. switching current: 2 A, AC 230 V, cos = 0,6Halogen lamps: AC 230 V, up to 300 WCapacitive load: max. 21 µFPower consumption: < 1 WNumber of levels: 4Number of zones: 26 with 104 switching seg-mentsArea of detection: 70° surface monitoring, approx. 7x8 mLight sensor: infinitely adjustable from 3-1000 luxRange: approx. 7 mTime: 1 sec. to approx. 8 min. in 6 stepsAmbient temperature: -25 °C to +55 °CNeutral conductor: requiredType of protection: IP 44

˜ Accessories: Capacitor, art. no. 542895.– Technical Information


polar white 545719 1/20 8.4dark brazil 545715 1/20 8.4

ARGUS 110 Basic Electronic outdoor movement detector. 110° sur-face monitoring for smaller house fronts and sec-tions of the house.• 360° short-range zone (approx. 4 m radius).• Large wiring compartment and plug system.• Looping is possible.• LED function display for fast alignment at the


easily accessible cover plate.• Flexibly adjustable sensor head.• Possible to blank out individual lens areas.Can be installed on walls and ceilings without additional accessories. Can be mounted on inner/outer corners and stationary pipes using a mounting bracket.Mains voltage: AC 230 V, ± 10 %, 50 HzIncandescent lamps: AC 230 V, max. 2000 WHalogen lamps: AC 230 V, max. 1200 WFluorescent lamps: AC 230 V, 1200 W uncom-pensatedCapacitive load: max. 35 µFMax. switching current: 16 A, AC 230 V, cos = 1Angle of detection: 110°Range: max. 12 mNumber of levels: 7Number of zones: 92 with 368 switching seg-mentsLight sensor: infinitely adjustable from 3-1000 luxTime: 1 sec. to approx. 8 min. in 6 levelsNeutral conductor: requiredPossible to set the sensor headWall mounting: 9° up, 24° down, 12° left/right, ± 12° axialCeiling mounting: 4° up, 29° down, 25° left/right, ± 8.5° axialEC guidelines: Low voltage guideline 2006/95/EC and EMC guideline 2004/108/ECType of protection: IP 55

˜ Accessories: Mounting bracket, art. no. 565291/92/93. Capaci-tor, art. no. 542895.

– Technical Information— Contents: With cover plate and segments to limit the area of

detection, screws and plugs.


polar white 565119 1/6 8.4


ww

w.m

erte

n.co

m

Movement detectors

F

©2010 | ARGUS movement detector, standard | ARGUS SURFACE-MOUNTED MOVEMENT DETECTOR 389

ARGUS 220 Basic Electronic outdoor movement detector. 220° sur-face monitoring for large house fronts and sec-tions of the house.• 360° short-range zone (approx. 4 m radius).• Large wiring compartment and plug system.• Looping is possible.• LED function display for fast alignment at the


easily accessible cover plate.• Flexibly adjustable sensor head.• Possible to blank out individual lens areas.Can be installed on walls and ceilings without additional accessories. Can be mounted on inner/outer corners and stationary pipes using a mounting bracket.Mains voltage: AC 230 V, ± 10 %, 50 HzIncandescent lamps: AC 230 V, max. 2000 WHalogen lamps: AC 230 V, max. 1200 WFluorescent lamps: AC 230 V, 1200 W uncom-pensatedCapacitive load: max. 35 µFMax. switching current: 16 A, AC 230 V, cos = 1Angle of detection: 220°Range: max. 12 mNumber of levels: 7Number of zones: 112 with 448 switching seg-mentsLight sensor: infinitely adjustable from 3-1000 luxTime: 1 sec. to approx. 8 min. in 6 levelsNeutral conductor: requiredPossible to set the sensor headWall mounting: 9° up, 24° down, 12° left/right, ± 12° axialCeiling mounting: 4° up, 29° down, 25° left/right, ± 8.5° axialEC guidelines: Low voltage guideline 2006/95/EC and EMC guideline 2004/108/ECType of protection: IP 55

˜ Accessories: Mounting bracket, art. no. 565291/92/93. Capaci-tor, art. no. 542895.




polar white 565219 1/12 8.4

ARGUS 220Electronic outdoor movement detector. 220° sur-face monitoring for large house fronts and sec-tions of the house.With an integrated interface for extension with a radio module (wireless connection of several devices).• 360° short-range zone (approx. 4 m radius).• Large wiring compartment and plug system.• Looping is possible.• LED function display for fast alignment at the


easily accessible cover plate.• Flexibly adjustable sensor head.• Possible to blank out individual lens areas.Can be installed on walls and ceilings without additional accessories. Can be mounted on inner/outer corners and stationary pipes using a mounting bracket.Functions:The following functions are possible via radio with an integrated radio module: Permanent ON, Per-manent OFF and AUTOMATIC.

Mains voltage: AC 230 V, ± 10 %, 50 HzIncandescent lamps: AC 230 V, max. 2000 WHalogen lamps: AC 230 V, max. 2000 WFluorescent lamps: AC 230 V, 1200 W uncom-pensatedCapacitive load: max. 35 µFMax. switching current: 16 A, AC 230 V, cos = 1Angle of detection: 220°Range: max. 16 mNumber of levels: 7Number of zones: 112 with 448 switching seg-mentsLight sensor: infinitely adjustable from 3-1000 luxTime: 1 sec. to approx. 8 min. in 6 levelsSensitivity: infinitely adjustableNeutral conductor: requiredPossible to set the sensor headWall mounting: 9° up, 24° down, 12° left/right, ± 12° axialCeiling mounting: 4° up, 29° down, 25° left/right, ± 8.5° axialEC guidelines: Low voltage guideline 2006/95/EC and EMC guideline 2004/108/ECType of protection: IP 55

˜ Accessories: Radio module for ARGUS 220 movement detector, art. no. 565495. Mounting bracket, art. no. 565291/92/93. Capacitor, art. no. 542895.




polar white 565419 1/12 8.4dark brazil 565415 1/6 8.4aluminium 565469 1/6 8.4

ww

w.m

erte

n.co

m


Movement detectors

F

390 ARGUS SURFACE-MOUNTED MOVEMENT DETECTOR | ARGUS movement detector, standard | ©2010

ARGUS 220 TimerElectronic outdoor movement detector. 220° sur-face monitoring for large house fronts and sec-tions of the house.With integrated light-sensitive time switch and interface for extension with a radio module (wire-less connection of several devices).• 360° short-range zone (approx. 4 m radius).• Large wiring compartment and plug system.• Looping is possible.• LED function display for fast alignment at the


easily accessible cover plate.• Flexibly adjustable sensor head.• Possible to blank out individual lens areas.Can be installed on walls and ceilings without additional accessories. Can be mounted on inner/outer corners and stationary pipes using a mounting bracket.. Functions:• Semi-automatic function: In the evening, when

the ambient light level falls to the set twilight threshold, the lighting will be switched on, then switched off again at the set time (e.g. 23:00). After this, the normal movement detector func-tion is active.

• Automatic function: like the semi-automatic function. In the morning, the lighting is switched on again at the pre-set time (e.g. 5.00 a.m.) and switched off when the twilight threshold is reached. In between, the normal movement detector function is active.

• Automatic time switch function: In the evening and the morning, the switch provides a bright-ness-dependent timer function (disabled under ARGUS), in between these times it provides the normal movement detector function.

• Semi-automatic time switch function: In the evening the switch provides a brightness-dependent timer function (disabled under ARGUS), after that it provides the normal movement detector function.

• Pure movement detector functionThe following functions are possible via radio with an integrated radio module: Permanent ON, Per-manent OFF, AUTOMATIC and SET (Teaching in current twilight value. No manual adjustment possible).

Mains voltage: AC 230 V, ± 10 %, 50 HzIncandescent lamps: AC 230 V, max. 2000 WHalogen lamps: AC 230 V, max. 2000 WFluorescent lamps: AC 230 V, 1200 W uncom-pensatedCapacitive load: max. 35 µFMax. switching current: 16 A, AC 230 V, cos = 1Angle of detection: 220°Range: max. 16 mNumber of levels: 7Number of zones: 112 with 448 switching seg-mentsLight sensor: infinitely adjustable from 3-1000 luxTime: 1 sec. to approx. 8 min. in 6 levelsSensitivity: infinitely adjustableNeutral conductor: requiredPossible to set the sensor headWall mounting: 9° up, 24° down, 12° left/right, ± 12° axialCeiling mounting: 4° up, 29° down, 25° left/right, ± 8.5° axialEC guidelines: Low voltage guideline 2006/95/EC and EMC guideline 2004/108/ECType of protection: IP 55





polar white 565619 1/6 8.4dark brazil 565615 1/6 8.4aluminium 565669 1/6 8.4

ARGUS 220 for 12 VElectronic outdoor movement detector. 220° sur-face monitoring for large house fronts and sec-tions of the house.12 V version. With an integrated interface for extension with a radio module (wireless connec-tion of several devices).• 360° short-range zone (approx. 4 m radius).• Large wiring compartment and plug system.• Looping is possible.• LED function display for fast alignment at the


easily accessible cover plate.• Flexibly adjustable sensor head.• Possible to blank out individual lens areas.Can be installed on walls and ceilings without additional accessories. Can be mounted on inner/outer corners and stationary pipes using a mounting bracket.Functions:The following functions are possible via radio with an integrated radio module: Permanent ON, Per-manent OFF and AUTOMATIC.

Supply voltage: DC 12 VSwitch contact: floatingMax. switching current: 5 A, DC 12 V 5 A, AC 230 V, cos = 1Power consumption: <1 WAngle of detection: 220°Range: max. 16 mNumber of levels: 7Number of zones: 112 with 448 switching seg-mentsLight sensor: infinitely adjustable from 3-1000 luxTime: 1 sec. to approx. 8 min. in 6 levelsSensitivity: infinitely adjustablePossible to set the sensor headWall mounting: 9° up, 24° down, 12° left/right, ± 12° axialCeiling mounting: 4° up, 29° down, 25° left/right, ± 8.5° axialEC guidelines: Low voltage guideline 2006/95/EC and EMC guideline 2004/108/ECType of protection: IP 55


– Technical Information— Dark brazil and aluminium are available on request.

Contents: With cover plate and segments to limit the area of detection, screws and plugs.


polar white 565426 1/6 8.4


ww

w.m

erte

n.co

m

Movement detectors

F

©2010 | ARGUS movement detector, standard | ARGUS SURFACE-MOUNTED MOVEMENT DETECTOR 391

ARGUS 300 Electronic outdoor movement detector. 300° sur-face monitoring for mounting on house corners in order to secure the area of two house walls.The range of the area of detection can be adjusted in sectors with three selectively adjusta-ble 100° sectors. This makes it possible to com-pensate for a site that slopes upwards or downwards. • 360° short-range zone (approx. 4 m radius).• Large wiring compartment and plug system.• Looping is possible.• LED function display for fast alignment at the

installation site.• Operating elements for setting the brightness

threshold, time and sensitivity (range).• Flexibly adjustable sensor head.• Possible to blank out individual lens areas.For installation on house corners without requir-ing additional accessories. To prevent obstacles such as downpipes from blanking the area of detection when installed on corners, an exten-sion can be installed.Mains voltage: AC 230 V, ± 10 %, 50 HzIncandescent lamps: max. 3000 WHalogen lamps: AC 230 V, max. 2500 WCapacitive load: max. 140 µFMax. switching current: 16 A, AC 230 V, cos = 0,6Power consumption: <1 WAngle of detection: 300°Range: max. 16 mNumber of levels: 7Number of zones: 123 with 492 switching seg-mentsLight sensor: infinitely externally adjustableArt. no. 564319 approx. 3-1000 luxArt. no. 564315 approx. 5-1000 luxTime: externally adjustable in 6 levels of approx. 1 sec. to approx. 8 min.Neutral conductor: requiredPossible to adjust the sensor head: Horizontal rotation to the left and right by 30°. Swivelling of the sensor head to the right or left by 45°.EC guidelines: Low voltage guideline 2006/95/EC and EMC guideline 2004/108/ECType of protection: IP 55

˜ Accessories: Extension, art. no. 554395/99. Capacitor, art. no. 542895.

– Technical Information— Contents: With 2 blanking inserts to limit the area of detection,

unlocking clamp, screws and plugs.



ARGUS 360 Electronic movement detector for outdoor ceiling mounting.360° surface monitoring over a length of 30 m and a width of 20 m.• Operating elements for setting the brightness

threshold and time.• LED function display for fast alignment at the

installation site.

Mains voltage: AC 230 V, ± 10 %, 50 HzIncandescent lamps: max. 3000 WHalogen lamps: AC 230 V, max. 2500 WCapacitive load: max. 140 µFMax. switching current: 16 A, AC 230 V, cos = 0,6Power consumption: < 1 WAngle of detection: 360°Range: max. 16 mNumber of levels: 7Number of zones: 124 with 496 switching seg-mentsLight sensor: infinitely adjustableArt. no. 564419 approx. 3-1000 luxArt. no. 564415 approx. 5-1000 luxTime: adjustable in 6 levels of approx. 1 sec. to approx. 8 min.Neutral conductor: requiredEC guidelines: Low voltage guideline 2006/95/EC and EMC guideline 2004/108/ECType of protection: IP 55

˜ Accessories: Capacitor, art. no. 542895.– Technical Information— Contents: With screws and plugs.



ww

w.m

erte

n.co

m


Movement detectors

F

392 ARGUS SURFACE-MOUNTED MOVEMENT DETECTOR | ARGUS movement detector, remote control | ©2010

ARGUS movement detector, remote control

ARGUS 220, remote-controlledElectronic outdoor movement detector. 220° sur-face monitoring for large house fronts and sec-tions of the house.With radio remote control.• 360° short-range zone (approx. 4 m radius).• Large wiring compartment and plug system.• Looping is possible.• LED function display for fast alignment at the


easily accessible cover plate.• Flexibly adjustable sensor head.• Possible to blank out individual lens areas.Can be installed on walls and ceilings without additional accessories. Can be mounted on inner/outer corners and stationary pipes using a mounting bracket.Functions:The following settings can be performed on the ARGUS via the radio remote control: Operating mode (permanent ON, permanent OFF, auto-matic), brightness threshold, switching duration, set and change the sensitivity to movement.

Mains voltage: AC 230 V ±10 %, 50 HzIncandescent lamps: AC 230 V, max. 2000 WHalogen lamps: AC 230 V, max. 2000 WFluorescent lamps: AC 230 V, 1200 W uncom-pensatedCapacitive load: max. 35 µFMax. switching current: 16 A, AC 230 V, cos = 1Angle of detection: 220°Range: max. 16 mNumber of levels: 7Number of zones: 112 with 448 switching seg-mentsLight sensor: infinitely adjustable from 3-1000 LuxTime: 1 sec. to approx. 8 min. in 6 steps Sensitivity: infinitely adjustableNeutral conductor: requiredSensor head adjustment for wall mounting:9° up, 24° down, 12° left/right, ± 12° axialSensor head adjustment for ceiling mounting:4° up, 29° down, 25° left/right, ± 8.5° axialEC directives: Low voltage directive 2006/95/EEC and EMC directive 2004/108/EECType of protection: IP 55Dimensions: 151x93x71 mm (HxWxD)

For remote control:Channels: 1Radio frequency: 868 MHzRange: up to 100 m (free field)up to 30 m (building)Battery: 1 lithium button cell (CR 2450N)Display elements: Status LED

˜ Accessories: Mounting bracket, art. no. 565291, 565293. Capac-itor, art. no. 542895.Replacement part: Remote control for ARGUS 220, remote-con-trolled, art. no. 565590.


detection, screws and plugs.Remote control.



ARGUS movement detector, CONNECT radio system

Radio ARGUS 220 CONNECTElectronic outdoor movement detector. 220° sur-face monitoring for large house fronts and sec-tions of the house.• 360° short-range zone (approx. 4 m radius).• Large wiring compartment and plug system.• Looping is possible.• LED function display for fast alignment at the


easily accessible cover plate.• Flexibly adjustable sensor head.• Possible to blank out individual lens areas.Can be installed on walls and ceilings without additional accessories. Can be mounted on inner/outer corners and stationary pipes using a mounting bracket.Functions:Up to four radio ARGUS 220 CONNECT devices can be networked and set via the remote control (permanent ON, permanent OFF, automatic, brightness threshold, switching time, set and change the sensitivity to movement.)In conjunction with the CONNECT radio configura-tion tool, you can:• fully integrate the radio ARGUS 200 CONNECT

into the radio network and network with other devices.

• Teaching receivers.• Use function module like scene, message and

alarm.

Mains voltage: AC 230 V ±10 %, 50 HzIncandescent lamps: AC 230 V, max. 2000 WHalogen lamps: AC 230 V, max. 2000 WFluorescent lamps: AC 230 V, 1200 W uncom-pensatedCapacitive load: max. 35 µFMax. switching current: 16 A, AC 230 V, cos = 1Angle of detection: 220°Range: max. 16 mNumber of levels: 7Number of zones: 112 with 448 switching seg-mentsLight sensor: infinitely adjustable from 3-1000 LuxTime: 1 sec. to approx. 8 min. in 6 steps Sensitivity: infinitely adjustableNeutral conductor: requiredSensor head adjustment for wall mounting:9° up, 24° down, 12° left/right, ± 12° axialSensor head adjustment for ceiling mounting:4° up, 29° down, 25° left/right, ± 8.5° axialEC directives: Low voltage directive 2006/95/EEC and EMC directive 2004/108/EECRadio frequency: 868 MHzTransmission range: up to 100 m in free field, up to 30 m indoorsType of protection: IP 55Dimensions: 151x93x71 mm (HxWxD)

˜ Accessories: Remote control for radio ARGUS 220 CONNECT, art. no. 509590. Mounting bracket, art. no. 565291, 565293. Capaci-tor, art. no. 542895.





ww

w.m

erte

n.co

m

Movement detectors

F

©2010 | ARGUS movement detector, KNX | ARGUS SURFACE-MOUNTED MOVEMENT DETECTOR 393

Remote control for radio ARGUS 220 CONNECTOne radio ARGUS 220 CONNECT or one radio receiver switch each can be taught, networked and set for each key (A1-A4) on the remote con-trol.

Functions:You can set the following functions on the ARGUS: Operating mode (permanent ON, perma-nent OFF, automatic), brightness threshold, switching duration, set and change the sensitivity to movement.

Channels: 4Radio frequency: 868 MHzRange: up to 100 m in free field, up to 30 m indoorsBattery: 1 lithium button cell (CR 2450N)Display elements: Status LED

˜ Receiver: Radio ARGUS 220 CONNECT, art. no. 5095...— Contents: With battery.


509590 1/48 8.4

ARGUS movement detector, KNX

KNX ARGUS 220KNX movement detector for outdoors. 220° sur-face monitoring for large house fronts and sec-tions of the house. With integrated bus coupler. The physical address is programmed with a mag-net.• 360° short-range zone (approx. 4 m radius).• Large wiring compartment and plug system.• Looping is possible.• LED function display for fast alignment at the


easily accessible cover plate.• Flexibly adjustable sensor head.• Possible to blank out individual lens areas.Can be installed on walls and ceilings without additional accessories. Can be mounted on inner/outer corners and stationary pipes using a mounting bracket.KNX software functions:Five movement blocks: up to four functions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes.Normal operation, master, slave, safety pause, disable function. Sensitivity, brightness and stair-case timer can be set using the ETS or the poten-tiometer. Self-adjusting staircase timer.

Angle of detection: 220°Range: max. 16 mNumber of levels: 7Number of zones: 112 with 448 switching seg-mentsLight sensor: infinitely variable from approx. 3 - 1000 lux, lux (infinite: movement detection is independent of the position of the sensor head)Time: can be set externally from 1 s to approx. 8 min. in 6 levels or via ETS from approx. 3 s to approx. 152 hoursSensitivity: infinitely adjustablePossible settings for sensor head:Wall mounting: 9° up, 24° down, 12° left/right, ±12° axialCeiling mounting: 4° up, 29° down, 25° left/right, ±8.5° axialEC directives: Low-voltage guideline 2006/95/EC and EMC directive 2004/108/ECType of protection: IP 55

˜ Accessories: Mounting bracket, art. no. 565291/92/93. Program-ming magnet for valve drive EMO, art. no. 639190.



polar white 632519 1/12 9dark brazil 632515 1/6 9aluminium 632569 1/6 9

ww

w.m

erte

n.co

m


Movement detectors

F

394 ARGUS SURFACE-MOUNTED MOVEMENT DETECTOR | Accessories | ©2010

Accessories

Mounting bracketInstallation bracket for attaching the ARGUS 110/220 Basic, ARGUS 220/Timer to outer of inner corners. Can also be secured to fixed pipes (VDE 0100) with conventional conduit clips.

˜ To be completed with: ARGUS 110/220 Basic, art. no. 565119, 565219. ARGUS 220 art. no. 5654... ARGUS 220 Timer, art. no. 5656... ARGUS 220, remote control, art. no. 5655... Radio ARGUS 220 CONNECT, art. no. 5095...In KNX, to be completed with: INSTABUS ARGUS 220 Connect, art. no. 6315... KNX ARGUS 220, art. no. 6325...

– Technical Information— Contents: With screws and plugs. Without conduit clip.


polar white 565291 1/21 8.4black grey 565293 1/21 8.4dark brazil 565292 1/21 8.4

ExtensionThe extension between wall bracket and sensor head can be installed for the ARGUS 300 in order to increase the distance between the movement detector and the wall.Obstacles such as downpipes, which blank the area of detection if mounted on corners, can be prevented.

Length: 11.5 cm

˜ To be completed with: ARGUS 300, art. no. 564315/19.– Technical Information



Radio module for ARGUS 220 movement detectorFor the wireless networking of several ARGUS 220 or ARGUS 220 Timer devices. A registered movement is sent to all taught movement detec-tors via the radio module. With integrated trans-mitter and receiver.The radio module can be retrofitted into the movement detector.

Functions:The radio module supports the functions perma-nent ON, permanent OFF, AUTOMATIC and SET (ARGUS 220 Timer only). The ARGUS uses the current twilight threshold for switching on in the SET function.

Radio frequency 868 MHzType of transmission: FSK, Frequency Shift Key-ing, bi-directional, with integrated transmitter and receiverRange: up to 100 m (free field)up to 30 m (building)

˜ To be completed with: ARGUS 220 art. no. 5654... ARGUS 220 Timer, art. no. 5656...Transmitter: Radio push-button, 2-gang for ARGUS, art. no. System Design 592290. Radio module for ARGUS 220 movement detec-tor, art. no. 565495.Receiver: Radio module for ARGUS 220 movement detector, art. no. 565495.


Radio module 565495 1/24 8.4

Radio push-button for ARGUS, 2-gang, battery-poweredFor System Design.Battery-powered radio transmitter with 4 pre-pro-grammed channels. For controlling the ARGUS 220 or ARGUS 220 Timer movement detectors, with inserted radio module. High installation flexibility due to flat design. A flush-mounted socket-outlet is not necessary. The push-button is suitable for sticking onto walls or glass, screwing onto walls or flush-mounted outlets as well as installing in a multiple combina-tion.

Functions:The push-button controls the functions perma-nent ON, permanent OFF, AUTOMATIC and SET (ARGUS 220 Timer only). The ARGUS uses the current twilight threshold for switching on in the SET function.

Channels: 4Range: up to 100 m (free field)up to 30 m (building)Battery: 1 lithium button cell (CR 2450)Display elements: LED for transmission confir-mationType of protection: IP 20

˜ Receiver: Radio module for ARGUS 220 movement detector, art. no. 565495.

— Contents: Battery, retaining plate, double-sided adhesive strips, single-sided adhesive strips (aluminium-coloured), screws, dowels.


˜ Thermoplastic brilliantpolar white 592290 1/40 8


ww

w.m

erte

n.co

m

Movement detectors

F

©2010 | Accessories | ARGUS SURFACE-MOUNTED MOVEMENT DETECTOR 395



AC 230 V, 0.33 µF 542895 10/450 8

Remote control for ARGUS 220, remote controlRadio remote control for triggering the ARGUS 220, remote control 1 ARGUS can be taught per remote control.

Functions:The following settings can be performed on the ARGUS via the radio remote control: Operating mode (permanent ON, permanent OFF, auto-matic), brightness threshold, switching duration, set and change the sensitivity to movement.

Channels: 1Radio frequency: 868 MHzRange: up to 100 m (free field)up to 30 m (building)Battery: 1 lithium button cell (CR 2450N)Display elements: Status LED

˜ Receiver: ARGUS 220, remote control, art. no. 5655...Accessories from: ARGUS 220, remote control, art. no. 5655...

— Contents: With battery.


565590 1/100 8.4

396

ww

w.m

erte

n.de

ARGUS flUSh-moUnted movement detectoR | ©2010

foR comfoRt And SAfety At eveRy tURnARGUS flUSh-moUnted movement detectoR

ARGUS 180/2.20m flush-mounted movement detector

Design 1-M, polar white, glossy

ARGUS flush-mounted movement

detector

The ARGUS indoor movement detector

saves energy and leaves no one in the

dark. The detector can be used to light

hallways, entryways, stairways and

cellar corridors on demand.

The functional inserts are available for

many different switch series: ARGUS

indoor movement detectors are availa-

ble for the extensive System M switch

series, as well as for the System Design,

OCTOCOLOR and AQUADESIGN series.

The ARGUS indoor movement detector

180/2.20 m FM provides the highest

level of security: with an installation

height of 2.20 meters, it provides

extremely sensitive anti-crawl protec-

tion, a broad range, and segments to

limit the area of detection.




into account when







generations.

By employing a movement and pres-

ence detector, individual households

can also save energy and contribute to

environmental protection. Merten

products can easily and conveniently

reduce energy costs with lighting

control, heating and multimedia control

tailored to your needs.

Movement detectors

397

ww

w.m

erte

n.de

©2010 | ARGUS flUSh-moUnted movement detectoRS

contentSARGUS flUSh-moUnted movement detectoR

M-STAR

M-PLAN real glass

M-PLAN/M-PLAN IIM-SMART

ATELIER-M

System M OCTOCOLOR Other models

M-SMART1-M OCTOCOLOR AQUADESIGN

M-ARC

modelS AvAilAble

Ca. 12 m

0,5 m

Ca. 8 m Ca. 8 m

2,20 m

0,5 m

AReA of detection of the flUSh-moUnted ARGUS 180/2.20m

lAteRAl AnGle of detection of the flUSh-moUnted ARGUS 180/2.20m

ANTIK

TRANCENT

System Design

ARTEC

M-PLAN metal

Movement detectors

ww

w.m

erte

n.co

m

ARGUS FLUSH-MOUNTED MOVEMENT DETECTOR

Movement detectors

G

398 ARGUS FLUSH-MOUNTED MOVEMENT DETECTOR | Flush-mounted inserts for ARGUS movement detectors | ©2010

Movement detectorsARGUS flush-mounted movement detectorSecurity electronicsMovement detectorsFlush-mounted movement detectorsARGUS flush-mounted movement detectorG

– Technical Information: Flush-mounted movement detector

– Technical Information: ARGUS flush-mounted devices overview

Flush-mounted inserts for ARGUS movement detectors







40-300 W 576799 1/50 8






0-1000 VA 576897 1/50 8

ARGUS flush-mounted movement detectors

ARGUS 180 / 2.20 m flush-mounted sensor moduleFor System M.Indoor movement detector with anti-crawl protec-tion.

Area of detection: 180°Number of levels: 6Number of zones: 46Range: 8 m right/left, 12 m to the frontSensitivity: infinitely adjustableLight sensor: infinitely adjustable from approx. 5 to approx. 1000 luxTime: adjustable in steps from 1 s to 8 minsMounting height: 2.2 m or 1.1 m with half the range

˜ To be completed with: Electronic switch insert, art. no. 576799. Relay switch insert, art. no. 576897.

– Technical Information— Contents: With cover segments to limit the area of detection.





ARGUS 180 flush-mounted sen-sor moduleFor System M.Indoor movement detector.

Area of detection: 180°Number of levels: 1Number of zones: 14Range: approx. 8 mSensitivity: infinitely adjustableLight sensor: infinitely adjustable between approx. 5 and 1000 luxTime: adjustable in steps from 1 s to 8 min


– Technical Information— Note: Supersedes art. no. 5752 ..






ww

w.m

erte

n.co

m

Movement detectors

G

©2010 | ARGUS flush-mounted movement detector with switch | ARGUS FLUSH-MOUNTED MOVEMENT DETECTOR 399

ARGUS 180 flush-mounted sen-sor moduleFor System Design.Indoor movement detector.



– Technical Information— Antique brass on request.

Note: Supersedes art. no. 5787 ..




578646 1/60 8

ARGUS 180 flush-mounted sen-sor moduleFor OCTOCOLOR.Indoor movement detector.







575342 1/60 8


ARGUS flush-mounted movement detector with switch

ARGUS 180 flush-mounted sen-sor module with switchFor System M.Indoor movement detector.With integrated switch for off/automatic/on.








ARGUS 180 flush-mounted sen-sor module with switchFor System Design.Indoor movement detector.With integrated switch for off/automatic/on.







579546 1/60 8

ww

w.m

erte

n.co

m


Movement detectors

G

400 ARGUS FLUSH-MOUNTED MOVEMENT DETECTOR | ARGUS flush-mounted movement detectors, waterproof | ©2010

ARGUS 180 flush-mounted sen-sor module with switchFor OCTOCOLOR.Indoor movement detector.With integrated switch for off/automatic/on.







575642 1/60 8


ARGUS flush-mounted movement detectors, waterproof

• Protection type IP 44.

ARGUS 180 flush-mounted sen-sor moduleFor AQUADESIGN.Splash-proof movement detector.





white 578144 1/50 8polar white 578119 1/50 8dark brazil 578115 1/50 8anthracite 578114 1/50 8aluminium 578160 1/50 8

ARGUS movement detector, KNX

KNX ARGUS 180, flush-mountedFor System M.Movement detector for indoors.When a movement is detected, a data telegram defined by the programming is transmitted.With integrated bus coupling unit.

KNX software functions:Five movement blocks: up to four functions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes.Normal operation, master, slave, safety pause, disable function. Sensitivity, brightness and stair-case timer can be set using the ETS or the poten-tiometer. Self-adjusting staircase timer.

Angle of detection: 180°Range: 8 m (for mounting height of 1.1 m)Number of levels: 1Number of zones: 14Sensitivity: infinitely adjustable (ETS or potenti-ometer)Light sensor: infinitely adjustable from approx. 10 to 2000 Lux (ETS or potentiometer) Time: adjustable in steps from 1 s to 8 min (potentiometer) or adjustable from 1 s to 255 hours (ETS)EC Directives: Low-voltage guideline 2006/95/EC and EMC guideline 2004/108/EC

— Contents: With bus connecting terminal and supporting plate.






ww

w.m

erte

n.co

m

Movement detectors

G

©2010 | ARGUS movement detector, KNX | ARGUS FLUSH-MOUNTED MOVEMENT DETECTOR 401

KNX ARGUS 180/2.20 m flush-mountedFor System M.Indoor movement detector with anti-crawl protec-tion.When a movement is detected, a data telegram defined by the programming is transmitted.With integrated bus coupling unit. For wall mount-ing in a size 60 mounting box, optimal installation at 2.2 m.

KNX software functions:Five movement blocks: up to four functions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes.Normal operation, master, slave, safety pause, disable function. Sensitivity, brightness and stair-case timer can be set using the ETS or the poten-tiometer. Two movement sensors: the sensitivity and range can be set separately for each sensor. Self-adjusting staircase timer.

Angle of detection: 180°Range: 8 m right/left, 12 m to the front (for a mounting height of 2.20 m)Mounting height: 2.2 m or 1.1 m with half the rangeNumber of levels: 6Number of zones: 46Number of movement sensors: 2, sector-orien-tated, adjustableSensitivity: infinitely adjustable (ETS or potenti-ometer)Light sensor: infinitely adjustable from approx. 10 to 2000 Lux (ETS or potentiometer) Time: adjustable in steps from 1 s to 8 min (potentiometer) or adjustable from 1 s to 255 hours (ETS)EC Directives: Low-voltage guideline 2006/95/EC and EMC guideline 2004/108/EC

— Contents: With bus connecting terminal and supporting plate.With cover segments to limit the area of detection.





KNX ARGUS 180, flush-mountedFor System Design.Movement detector for indoors.When a movement is detected, a data telegram defined by the programming is transmitted.With integrated bus coupling unit.







631846 1/30 9

402

ww

w.m

erte

n.de

ARGUS pReSence detectoR | ©2010

eFFIcIent And InteLLIGentARGUS pReSence detectoR

ARGUS presence detector

Two key elements in planning modern

buildings are energy-efficiency and

sustainability – and intelligent building

systems are key to creating efficient,

safe, and forward-looking buildings.

The ARGUS presence detector is a

reliable partner for controlling lighting,

heating, and ventilation in individual

rooms according to need.

The light is automatically controlled via

the first channel. The ARGUS presence

detector measures the intensity of the

natural light. If brightness has fallen

below a preselected light threshold,

the smallest movements in the room

are sufficient to switch on the lighting

automatically. When there is enough

natural light or when the room is

empty, the presence detector turns off

the light. The second channel provides

presence-based control of other units

such as heating or ventilation con-

nected to channel 1, independently of

the first channel.

KNX ARGUS Presence 180/2.20 m

FM

The KNX ARGUS Presence 180/2.20 m

FM is ideal when the detector can not

be installed on the ceiling. The detec-

tor can be installed flush-mounted or

flush to the wall, making it an unobtru-

sive and harmonious element of the

room's design – the KNX ARGUS

Presence 180/2.20 m FM is available

in the System M switch designs.

KNX ARGUS Presence

With five channels and four sensor

areas, which can be assigned to

different channels, the KNX ARGUS

Presence provides highly individual-

ised convenience. For example,

if movement is detected in area A,

only the copier lighting is switched on.

However, if a presence is detected in

areas B through D, the KNX ARGUS

Presence will switch on the light in the

entire space.

By employing a move-

ment and presence

detector, individual

households can also

save energy and contribute to environ-

mental protection. Merten products can

easily and conveniently reduce energy

costs with lighting control, heating and

multimedia control tailored to your

needs.

Presence detectors

403

ww

w.m

erte

n.de

©2010 | ARGUS pReSence detectoR

contentSARGUS pReSence detectoR

ARGUS pReSence

• for offices, corridors and schools

• same as ARGUS Presence, plus:• permanent ON, OFF and AUTOMATIC func-

tions can be remote controlled• lighting can be switched on manually by

using the extension input push-button

KnX ARGUS pReSence BASIc

• with 2 channels• now also available in the colour aluminium

KnX ARGUS pReSence

• same as KNX ARGUS Presence Basic but with 5 channels

• 4 separately adjustable sensor ranges• now also available in the colour aluminium

KnX ARGUS pReSence wIth LIGht contRoL And IR ReceIveR

• same as KNX ARGUS Presence, plus:• lighting control channel• IR receiver can be used for configuration

or remote control of KNX functions• now also available in the colour aluminium

KnX ARGUS pReSence 180/2.20 m, FLUSh-moUnted

• 2 separate sensor areas• 5 channels, each with 4 output objects• for wall mounting• in System M design

ARGUS pReSence SyStem

• for the uninterrupted monitoring of large offices and long corridors

• up to 8 sensor heads can be switched in sequence (to monitor rooms and corridors up to 64 m)

• lighting can be switched on manually by using the extension input push-button

Presence detectors

ww

w.m

erte

n.co

m

ARGUS PRESENCE DETECTORS

Presence detectors

H

404 ARGUS PRESENCE DETECTORS | ARGUS Presence system | ©2010

Presence detectorsARGUS presence detectorsSecurity electronicsPresence detectorsARGUS presence detectorsH

– Technical Information: ARGUS Presence

– Technical Information: ARGUS Presence system

ARGUS Presence system

ARGUS Presence systemIndoor presence detection. The system detects the slightest movement in the room, switches the light on and leaves it on until no further move-ment is detected or natural lighting is sufficient. The power unit has two relay outputs:Relay 1:For brightness-dependent movement detection, e.g. lighting. The overshoot time is infinitely adjustable at the sensor within a range of between 10 seconds and 30 minutes. The device constantly monitors the brightness in the room. Then, when there is sufficient natural light, the artificial light is switched off even if there is still someone in the room. The relay switches phase L.Relay 2:Floating contact (electrically isolated). For move-ment detection independent of brightness e.g. ventilation or heating control. The overshoot time is infinitely adjustable at the sensor within a range of between 5 minutes and 2 hours.The system consists of the sensor head and a power unit with a permanently attached intercon-necting cable (length 2.5 m) plugged into the sensor head. Every sensor head has two sockets to enable through-wiring. A maximum of 8 sensor heads (art. no. 550419) can be connected in this way to one power unit (master-slave principle). Installing several sensor heads makes it possible to seamlessly monitor long corridors and large rooms for example. The sensor head that regis-tered the last movement determines the over-shoot time. Can also be controlled via an extension input. Sensor heads are installed in 68 mm ceiling openings. Areas of use include: offices, schools, public buildings, homes. Optimum installation height of 2.50 m.

Mains voltage: AC 230 V ± 10%, 50 HzConnecting cable: 2.5 mMax. switching current per relay: 10 A, AC 230 V, cos = 0,6Incandescent lamps: max. 2300 WHalogen lamps: max. 2000 WMotor load: max. 1000 WCapacitive load: max. 140 µFPower consumption: 2 W for 8 sensorsAngle of detection: 360°Range: a radius of max. 4 m from the installation site (at a mounting height of 2.50 m)Number of levels: 5Number of zones: 71 with 284 switching seg-mentsLight sensor: infinitely adjustable between approx. 10 and 1000 lux. The light sensor is not active in the test position. EC guidelines: Low voltage guideline 2006/95/EC and EMC guideline 2004/108/EC

˜ Accessories: ARGUS Presence system sensor, art. no. 550419.– Technical Information


polar white 550499 1/6 8.4

ARGUS Presence system sensorSensor head with prefabricated interconnecting cable for extending the ARGUS Presence system. Each sensor head has two plugs allowing through-wiring to other sensors.

Interconnecting cable: 8 m longAngle of detection: 360°Range: a radius of max. 4 m from the installation site (at a mounting height of 2.50 m)Number of levels: 5Number of zones: 71 with 284 switching seg-mentsLight sensor: infinitely adjustable between approx. 10 and 1000 lux. The light sensor is not active in the test position. EC guidelines: Low voltage guideline 2006/95/EC and EMC guideline 2004/108/EC

˜ To be completed with: ARGUS Presence system, art. no. 550499.– Technical Information


polar white 550419 1/6 8.4


ww

w.m

erte

n.co

m

Presence detectors

H

©2010 | ARGUS Presence | ARGUS PRESENCE DETECTORS 405

– Technical Information: ARGUS Presence

ARGUS Presence

• Indoor presence detection.• ARGUS switches on the light and leaves it switched on until

presence is no longer detected or the ambient brightness is suf-ficient. Can be used in offices, schools, public buildings or homes, for example. The detector is installed in or on the ceil-ing.

• For installation on the ceiling in a 60 mm installation box. Opti-mum height 2.50 m.

• The surface-mounted housing, art. no. 550619, allows the pres-ence detector to be mounted on non-suspended ceilings.

ARGUS PresenceThe device has 2 relay outputs:Relay 1:For brightness-dependent movement detection, e.g. lighting. The overshoot time is infinitely adjustable within a range of between 10 seconds and 30 minutes. ARGUS Presence constantly monitors the brightness in the room. Then, when there is sufficient natural light, the artificial light is switched off even if there is still someone in the room. Relay 2:For movement detection independent of bright-ness e.g. ventilation or heating control. The over-shoot time is infinitely adjustable between 5 minutes and 2 hours.

Mains voltage: AC 230 V ±10 %, 50 HzRelay 1 (sole use):Nominal capacity: max. 1000 W/VA, 5 A, cos = 1 5 A, cos = 0.6Incandescent lamps: 1000 W 230 V halogen: 1000 WLV halogen: 500 W with conventional trans-formerCapacitive load: 5 A, 140 µFFluorescent lamps: 5 A, 140 µF;1000 W, uncompensated;1000 W, 140 µF parallel compensation;2x500 W, twin-lamp circuit;Electronic ballast: 5 A, Cmax 140 µFMinimum load: 10 mA, DC 24 VRelay 2 (sole use):Nominal capacity: max. 1000 W, cos = 1Relays 1+2 (combined use):Nominal capacity: max. 1000 VA, cos = 0.6 and max. 750 W halogen 230 VFuse: T5HPower consumption: < 1 WAngle of detection: 360°Range: a radius of max. 7 m from the installation site (at a mounting height of 2.50 m)Number of levels: 6Number of zones: 136 with 544 switching seg-mentsLight sensor: infinitely adjustable between approx. 10 and 1000 lux. The light sensor is not active in the test position. EC guidelines: Low voltage guideline 2006/95/EC and EMC guideline 2004/108/EC

˜ Accessories: Surface-mounted housing for ARGUS Presence, art. no. 550619.



polar white 550590 1/6 8.4

ARGUS Presence with IR receiver and for extension unit operationWhen connecting the nominal voltage or short-term interruption of the power supply (e.g. with a push-button connected as a make contact), the device switches channel 1 on for one minute plus the set time, regardless of the level of light.Other features and attributes as for ARGUS Pres-ence, art. no. 550590.For channel 1, the functions "Permanent ON", "Permanent OFF" and "Automatic" can be control-led with the IR remote control.

˜ Accessories: Surface-mounted housing for ARGUS Presence, art. no. 550619.Transmitter: IR remote control Distance, art. no. 570222.



polar white 550591 1/6 8.4

ww

w.m

erte

n.co

m


Presence detectors

H

406 ARGUS PRESENCE DETECTORS | KNX ARGUS Presence | ©2010

KNX ARGUS Presence

• ARGUS Presence switches on the light and leaves it switched on until it can no longer detect the presence of people or there is sufficient natural daylight.

• Its areas of application include offices, schools, public buildings and private interiors.

KNX ARGUS Presence BasicPresence detection indoors.If KNX ARGUS Presence detects smaller move-ments in the room, data telegrams are transmit-ted via KNX to control the lighting, blind or heating at the same time. When the lighting is controlled by brightness-dependent movement detection, the device con-stantly monitors the brightness in the room. If sufficient natural light is at hand, the device switches the artificial light off even if a person is present. The overshoot time can be adjusted using the ETS.With integrated bus coupling unit. For ceiling mounting in a size 60 mounting box, optimal installation at 2.5 m. Can also be mounted to ceilings using the surface mounting housing for ARGUS Presence.

KNX software functions:Two movement/presence blocks: up to four func-tions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes.Normal operation (no master/slave), safety pause, disable function. Self-adjusting staircase timer. Actual brightness value: can be specified via the internal and/or an external light sensor.

Angle of detection: 360°Range: a radius of max. 7 m (at a mounting height of 2.50 m)Number of levels: 6Number of zones: 136 with 544 switching seg-mentsNumber of movement sensors: 4Light sensor: internal light sensor infinitely adjustable from approx. 10 to 2000 Lux (ETS); external light sensor via KNXEC Directives: Low-voltage guideline 2006/95/EC and EMC guideline 2004/108/EC





KNX ARGUS PresencePresence detection indoors.If KNX ARGUS Presence detects smaller move-ments in the room, data telegrams are transmit-ted via KNX to control the lighting, blind or heating at the same time. When the lighting is controlled by brightness-dependent movement detection, the device con-stantly monitors the brightness in the room. If sufficient natural light is at hand, the device switches the artificial light off even if a person is present. The overshoot time can be adjusted using the ETS.With integrated bus coupling unit. For ceiling mounting in a size 60 mounting box, optimal installation at 2.5 m. Can also be mounted to ceilings using the surface mounting housing for ARGUS Presence.

KNX software functions:Five movement/presence blocks: up to four func-tions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes.Normal operation, master, slave, monitoring, safety pause, disable function. Four movement sensors: the sensitivity and range can be set sep-arately for each sensor. Self-adjusting staircase timer. Actual brightness value: can be detected via the internal and/or an external light sensor. Actual value correction.

Angle of detection: 360°Range: a radius of max. 7 m (at a mounting height of 2.50 m)Number of levels: 6Number of zones: 136 with 544 switching seg-mentsNumber of movement sensors: 4, separately adjustableLight sensor: internal light sensor infinitely adjustable from approx. 10 to 2000 Lux (ETS); external light sensor via KNXEC Directives: Low-voltage guideline 2006/95/EC and EMC guideline 2004/108/EC






ww

w.m

erte

n.co

m

Presence detectors

H

©2010 | KNX ARGUS Presence | ARGUS PRESENCE DETECTORS 407

KNX ARGUS Presence with light control and IR receiverPresence detection indoors.If KNX ARGUS Presence detects smaller move-ments in the room, data telegrams are transmit-ted via KNX to control the lighting, blind or heating at the same time. When the lighting is controlled by brightness-dependent movement detection, the device con-stantly monitors the brightness in the room. If sufficient natural light is at hand, the device switches the artificial light off even if a person is present. The overshoot time can be adjusted using the ETS.Light control enables the required brightness in a room to be achieved permanently. Dimming and the optional use of a second lighting group main-tains a constant brightness.Individual ARGUS Presence configurations can be changed or other KNX devices can be controlled remotely using the IR receiver.With integrated bus coupling unit. For ceiling mounting in a size 60 mounting box, optimal installation at 2.5 m. Can also be mounted to ceilings using the surface mounting housing for ARGUS Presence.

KNX software functions:Five movement/presence blocks: up to four func-tions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes. An additional light control block: brightness can be maintained constant by dimming and an addi-tional adjustable level.IR receiver function. IR configuration: setting the brightness threshold, staircase timer factors or range.Normal operation, master, slave, monitoring, safety pause, disable function. Four movement sensors: the sensitivity and range can be set sep-arately for each sensor. Self-adjusting staircase timer. Actual brightness value: can be detected via the internal and/or an external light sensor. Actual value correction.

Angle of detection: 360°Range: a radius of max. 7 m (at a mounting height of 2.50 m)Number of levels: 6Number of zones: 136 with 544 switching seg-mentsNumber of movement sensors: 4, separately adjustableLight sensor: internal light sensor infinitely adjustable from approx. 10 to 2000 Lux (ETS); external light sensor via KNXNumber of IR channels: 10 for controlling KNX devices, 10 for configurationEC Directives: Low-voltage guideline 2006/95/EC and EMC guideline 2004/108/EC

˜ Accessories: Surface-mounted housing for ARGUS Presence, art. no. 550619.Transmitter: IR remote control Distance, art. no. 570222. CON-NECT radio universal remote control art. no. 506923.




KNX ARGUS Presence 180/2.20 m flush-mountedFor System M.Presence detection indoors.If KNX ARGUS Presence detects smaller move-ments in the room, data telegrams are transmit-ted via KNX to control the lighting, blind or heating at the same time. When the lighting is controlled by brightness-dependent movement detection, the device con-stantly monitors the brightness in the room. If sufficient natural light is at hand, the device switches the artificial light off even if a person is present. The overshoot time can be adjusted using the ETS.With integrated bus coupling unit. For wall mount-ing in a size 60 mounting box, optimal installation at 2.2 m. With anti-crawl protection.

KNX software functions:Five movement/presence blocks: up to four func-tions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes.Normal operation, master, slave, monitoring, safety pause, disable function. Two movement sensors: the sensitivity and range can be set sep-arately for each sensor. Self-adjusting staircase timer. Actual brightness value: can be detected via the internal and/or an external light sensor. Actual value correction.

Angle of detection: 180°Range: 8 m right/left, 12 m to the front (for a mounting height of 2.20 m)Mounting height: 2.2 m or 1.1 m at half the rangeTime: adjustable in steps from 1 s to 8 min (potentiometer) or adjustable from 1 s to 255 hours (ETS)Number of levels: 6Number of zones: 46Number of movement sensors: 2, separately adjustableLight sensor: internal light sensor infinitely adjustable from approx. 10 to 2000 Lux (ETS); external light sensor via KNXEC Directives: Low-voltage guideline 2006/95/EC and EMC guideline 2004/108/EC






ww

w.m

erte

n.co

m


Presence detectors

H

408 ARGUS PRESENCE DETECTORS | Accessories | ©2010

Accessories

Surface-mounted housing for ARGUS PresenceThe surface-mounted housing for ARGUS Pres-ence devices also allows them to be surface mounted.

˜ To be completed with: ARGUS Presence, art. no. 550590/91. KNX ARGUS Presence Basic art. no. 6307... KNX ARGUS Presence art. no. 6308... KNX ARGUS Presence with light control and IR receiver art. no. 6309...



polar white 550619 1/21 8.4


ww

w.m

erte

n.co

m

Presence detectors

H

©2010 | Accessories | ARGUS PRESENCE DETECTORS 409

410

ww

w.m

erte

n.de

ARGUS liGht-SenSitive SwitcheS | ©2010

eFFicient SwitchinGARGUS liGht-SenSitive Switch

ARGUS light-sensitive switch

Two Merten ARGUS light-sensitive

switches can be used to illuminate

outdoor spaces on demand. The

ARGUS Compact light-sensitive switch

has a preset switch-on and switch-off

threshold, while the ARGUS light

sensitive switch provides maximum

flexibility with adjustable switching

thresholds and higher switching capac-

ity. The latter is also externally adjust-

able.

ARGUS light-sensitive time switch

The ARGUS light-sensitive time switch

combines a light-sensitive switch and

a time switch in a single unit. Combin-

ing two technologies in one solution

with a light-sensitive switch coupled to

a time switch can lead to even greater

energy savings. Depending on the

season, the ARGUS light-sensitive time

switch turns on the lights at dusk, and

turns them off again at a preset time.

The integrated clock component auto-

matically synchronises the time – an

especially useful feature, especially in

the event of a power failure.




into account when







generations.

By employing a movement and pres-

ence detector, individual households

can also save energy and contribute to

environmental protection. Merten

products can easily and conveniently

reduce energy costs with lighting

control, heating and multimedia control

tailored to your needs.

Light-sensitive switch

411

ww

w.m

erte

n.de

©2010 | ARGUS liGht-SenSitive SwitcheS

contentSARGUS liGht-SenSitive Switch

ARGUS liGht-SenSitive SwitcheS: the RiGht SolUtion FoR Any ApplicAtion

ARGUS liGht-SenSitive Switch 1100 ARGUS liGht-SenSitive time Switch

ARGUS liGht-SenSitive Switch

• Fixed brightness threshold• Switching delay

• Brightness threshold can be set externally between 2 and 300 lux

• Integrated time switch function

• Brightness threshold can be set externally between 3 and 2,000 lux

• Switching delay



ww

w.m

erte

n.co

m

ARGUS LIGHT-SENSITIVE SWITCHES


I

412 ARGUS LIGHT-SENSITIVE SWITCHES | ARGUS light-sensitive time switch | ©2010

Light-sensitive switchARGUS light-sensitive switchesSecurity electronicsLight-sensitive switchesARGUS light-sensitive switchesI

– Technical Information: ARGUS light-sensitive switch


ARGUS light-sensitive time switchAC 230 VWaterproof surface-mounted device with impact-resistant housing. With time function.The light-sensitive time switch combines the functions of a light-sensitive switch and a time switch in a single device.Choose from between three functions:Twilight function:The lighting is switched on in the evening and switched off in the morning when the appropriate pre-set twilight threshold is reached. Automatic function: In the evening, the light is switched on when the pre-set twilight threshold is reached and switched off again at a pre-set time (e.g. 11.00 p.m.). In the morning, the lighting is switched on at a pre-set time (e.g. 5.00 a.m.) and switched off again when the twilight threshold is reached.Semi-automatic function:In the evening, the light is switched on when the pre-set twilight threshold is reached and switched off again at a pre-set time (e.g. 11.00 p.m.).A special integrated function ensures that the time is automatically adjusted to the ambient brightness. It is not necessary to set the time manually.Relay with µ contact. High sensitivity to light. Automatic time adjustment. Large wiring com-partment.

Connected load: up to 2300 VAMax. switching current: AC 230 V, 10 A cos = 0.6Halogen lamps: AC 230 V, up to 2000 WIncandescent lamps: AC 230 V, up to 2300 WCapacitive load: max. 140 µFConnecting terminals: for 2.5 mm2 rigid conduc-torsAdjustment range/switch threshold: 2 to 300 lux, adjustableDimensions: approx. 97 x 80 x 47 mm



light grey 544890 1/35 8.4

ARGUS light-sensitive switches

ARGUS compact light-sensitive switchAC 230 VWaterproof surface-mounted device with fixed switch threshold.

Connected load: up to 1100 VAMax. switching current: 5 A ohmic, 2.5 A induc-tive at cos = 0.5Halogen lamps: AC 230 V, up to 200 WCapacitive load: max. 21 µFAdjustment range/switch threshold: On: 4 to 7 luxOff: 6 to 18 luxSwitching delay- when switching on: approx. 25 s to 45 s- when switching off: approx. 30 s to 65 sDimensions: approx. 81 x 70 x 45 mm



light grey 544529 1/45 8.4

ARGUS light-sensitive switchAC 230 VWaterproof surface-mounted device with impact-resistant housing.Reinforced relay.High sensitivity to light.Large wiring compartment.

Connected load: up to 2300 VAMax. switching current: AC 230 V, 10 A, cos = 0.6Halogen lamps: AC 230 V, up to 2000 WIncandescent lamps: AC 230 V, up to 2300 WCapacitive load: max. 140 µFConnecting terminals: for 2.5 mm2 rigid conduc-torsAdjustment range/switch threshold: 3 to 2000 lux, adjustableSwitching delay - when switching on: approx. 40 s - when switching off: approx. 100 sDimensions: approx. 97x80x47 mm



with switching delay, polar white

544819 1/35 8.4

ARGUS LIGHT-SENSITIVE SWITCHES

ww

w.m

erte

n.co

m


I

©2010 | Accessories | ARGUS LIGHT-SENSITIVE SWITCHES 413

ARGUS light-sensitive switchAC 230 VWaterproof surface-mounted device with impact-resistant housing.Reinforced relay.High sensitivity to light.Large wiring compartment.

Connected load: up to 2300 VAMax. switching current: AC 230 V, 10 A, cos = 0.6Halogen lamps: AC 230 V, up to 2000 WIncandescent lamps: AC 230 V, up to 2300 WCapacitive load: max. 140 µFConnecting terminals: for 2.5 mm2 rigid conduc-torsAdjustment range/switch threshold: 3 to 2000 lux, adjustableSwitching delay - when switching on: approx. 40 s - when switching off: approx. 100 sDimensions: approx. 97x80x47 mm



without switching delay, light grey

544829 1/35 8.4

with switching delay, light grey

544894 1/35 8.4

Accessories



AC 230 V, 0.33 µF 542895 10/450 8

414

ww

w.m

erte

n.de

ARGUS Smoke detectoR SyStem | ©2010

LIFe-SAVeR IN AN AttRActIVe deSIGN

ARGUS smoke detector system

More than 600 people still lose their

lives each year due to smoke inhala-

tion during a household fire in Ger-

many. Many German states now re-

quire smoke detectors in private

homes. However, many households

still are not equipped with a smoke

detector.

Every Merten smoke detector is suita-

ble for use in living areas, and is easy

to mount directly to the ceiling. A light

display depicts the device's current

status. The entire ARGUS smoke

detector family has been approved by

the German Property Insurers' Associa-

tion (VdS).

The ARGUS smoke detector family is

comprised of five different models

offering the best performance for

every use – from installation of single

smoke detectors to radio-controlled

solutions.

The flush-mounted system relay for

ARGUS smoke detectors provides the

highest level of safety. The system

relay links the ARGUS smoke detector

system with external devices such as

sirens or signal lamps.

ARGUS Smoke Detector Basic Longlife

polar white

Flush-mounted system relay for ARGUS

smoke detector

Smoke detectors

415

ww

w.m

erte

n.de

©2010 | ARGUS Smoke detectoR SyStem

coNteNtSARGUS Smoke detectoR SyStem

ARGUS Smoke detectoRS: the RIGht SoLUtIoN FoR ANy AppLIcAtIoN

• the good-value-for-money smoke detector as an individual solution

• operated with a 9 V battery • Battery service life: approx. 2.5 years

Recommended for use in: suites / single-storey flats

ARGUS bASIc LoNGLIFe Smoke detectoR

• the good-value-for-money smoke detector as an individual solution

• operated with 9 V lithium longlife batteries • Battery service life: approx. 10 years

Recommended for use in: suites / single-storey flats

ARGUS coNNect Smoke detectoR

• radio-networked smoke detector solution for retrofitting your entire home

• Networking options: • Radio network – with an integrated

radio module • Wired networking – wired networking

is effected via a separate 2-wire cable (SELV).

• battery-powered with 9 V battery (battery service life: approx. 2.5 years)

Recommended for use in: existing single-family house/retrofitting

ARGUS 230 V Smoke detectoR

• one of the flattest mains-operated 230 V smoke detectors with large wiring compart-ment

• integrated battery provides functional reliability during power failure

• with integrated networking options: up to 25 wired smoke detectors

• easy to maintain due to mains supply• Networked using 1 additional core in

230 V network• including surface-mounted base

Recommended for use in: new, single-family homes

ARGUS coNNect 230 V Smoke detectoR

• radio-networked smoke detector solution for new homes

• Networking options: • Radio network – with an integrated

radio module • Wired networking – wired networking

is carried out via a separate core in the 230 V network.

• Easy to maintain due to mains supply• including surface-mounted base

Recommended for use in: new, single-family homes

FLUSh-moUNted SyStem ReLAy

• integration of external signal sources such as sirens, flashlights, vibrating cushions, etc.

• space-saving flush mounting or in direct proximity to the connected signal sources

• connection via 230 V power supply• up to 160 smoke detectors can be inte-

grated in 16 radio cells• option of integrating into the Merten

CONNECT radio system via a CONNECT radio transmitter

• signal is forwarded to KNX installations via a binary input

Smoke detectors

ww

w.m

erte

n.co

m

ARGUS SMOKE DETECTORS

Smoke detector

J

416 ARGUS SMOKE DETECTORS | ARGUS smoke detector | ©2010

Smoke detectorARGUS smoke detectorsSecurity electronicsSmoke detectorsARGUS smoke detectorsJ

– Technical Information: ARGUS smoke detector

ARGUS smoke detector

All ARGUS smoke detectors are with VdS approval!• BOSEC certification• Awaiting CoMo certification• Approved in accordance with EN 14676The smoke detectors operate in accordance to the scattered light principle and detects smoke before the concentration of smoke becomes dangerous for people. This is signalled by a loud warning tone (about 85 db(A)) and an LED.In networked systems:• A detector detects smoke and then the alarm is set off by all

connected smoke alarms.Combination Connect smoke detector and Connect 230 V:• Radio networking is possibleMounting options:• Directly on the ceiling with the screws and plugs supplied• with a central screw• On flush-mounted and cavity wall boxesAn installed smoke detector system (Art. no. 6634.., 6637.., 663491) can be extended with smoke detectors with radio net-working and 2-wire cable networking.

ARGUS smoke detector ConnectBattery-powered radio smoke detector for early detection of smouldering fires and development of smoke with open fires indoors. Networking options:• Radio network (with integrated radio module)• Wired networkWired networking is effected via a separate 2-wire cable (SELV).Functions:• Self-test• Continuous battery monitoring. A weak battery

is displayed via an acoustic signal as well as a flashing LED.

• Push-button for functional test

Functional principle: scattered light (Tyndall effect)Sensitivity: in accordance with EN 14604Battery type: 9 V monobloc battery, IEC 6LR61, alkaliBattery failure signal: approx. every 40 seconds, for at least 30 daysBattery life: approx. 2.5 yearsSignal: approx. 85 dB(A) at 3 m distanceDisplay elements: red LEDNetwork: max. 40 smoke detectorsNetwork cable: type J-Y(St)Y 2x2x0.6Total cable length: up to 500 mCable length between two detectors: max. 25 mRadio frequency: 868 MHzTransmission range: up to 100 m in free field, up to 30 m indoorsRadio operating elements: DIP switch for addressing/groupingOperating ambient temperature: 0 °C to 60 °CDimensions: 112 x 44 mm (Ø x H)Type of protection: IP 42With VdS approval

˜ Accessories: Sealing pins for ARGUS smoke detector, Art. No. 547000. Flush-mounted system relay for ARGUS smoke detector, art. no. 548001.

— Note: Not compatible with Merten CONNECT radio system. The wired connection of the ARGUS smoke detector 230 V/Connect 230 V art. no. 5475.., 5485 is not permitted. With pipe cabling systems a gasket must be installed on site between the ceiling and the smoke detector.Contents: Battery.Screws and plugs.




ww

w.m

erte

n.co

m

Smoke detector

J

©2010 | ARGUS smoke detector | ARGUS SMOKE DETECTORS 417

ARGUS smoke detector Connect 230 VMains-powered radio smoke detector with backup battery for early detection of smouldering fires and smoke build-up indoors with open fires.Networking options:• Radio network (with integrated radio module)• Wired networkWired networking is via a separate core in the 230 V network. Functions:• Self-test• Continuous battery monitoring. A weak battery



Functional principle: scattered light (Tyndall effect)Sensitivity: in accordance with EN 14604Supply voltage: AC 230 V, 50 HzBattery type: 9 V monobloc battery, IEC 6LR61, alkaliBattery failure signal: approx. every 40 seconds, for at least 30 daysBattery life:With a 230 V power supply: approx. every 4-5 years, dependent on the self discharge of the battery installed When battery-operated only: approx. 2.5 years.Signal: approx. 85 dB(A) at 3 m distanceDisplay elements: 2 LEDs (red, green)Network: max. 40 smoke detectorsNetwork cable: separate, free core e.g. 1 x 1.5 mm2 in 230 V networkConnecting terminals: each 2 x 2.5 mm2, loop-ing possibleTotal cable length: up to 500 mCable length between two detectors: max. 25 mRadio frequency: 868 MHzTransmission range: up to 100 m in free field, up to 30 m indoorsRadio operating elements: DIP switch for addressing/groupingOperating ambient temperature: 0 °C to 60 °CDimensions: 112 x 44 mm (Ø x H); with surface mounting base 112 x 59 mm (Ø x H)Type of protection: IP 42With VdS approval


— Note: Not compatible with Merten CONNECT radio system. The wired connection of the ARGUS smoke detector Connect art. no. 5480.. is not permitted. With pipe cabling systems a gasket must be installed on site between the ceiling and the smoke detector.Contents: Battery.Screws and plugs.Surface-mounted mounting base with a larger wiring compartment.



ARGUS smoke detector 230 VMains-powered smoke detector with backup bat-tery for early detection of smouldering fires and open fires with smoke build-up indoors.Up to 25 smoke detectors can be wired to a net-work. Wired networking is carried out via a sepa-rate wire in the 230 V network. Functions:• Self-test• Continuous battery monitoring. A weak battery



Functional principle: scattered light (Tyndall effect)Sensitivity: in accordance with EN 14604Supply voltage: AC 230 V, 50 HzBattery type: 9 V monobloc battery, IEC 6LR61, alkaliBattery failure signal: approx. every 40 seconds, for at least 30 daysBattery life:With a 230 V power supply: approx. 4 - 5 years, depending on the self discharge of the battery used When battery-operated only: approx. 2.5 yearsSignal: approx. 85 dB(A) at 3 m distanceDisplay elements: 2 LEDs (red, green)Network: max. 25 smoke detectorsNetwork cable: separate, free core e.g. 1 x 1.5 mm2 in 230 V networkConnecting terminals: each 2 x 2.5 mm2, loop-ing possibleTotal cable length: up to 500 mCable length between two detectors: max. 25 mOperating ambient temperature: 0 °C to 60 °CDimensions: 112 x 44 mm (Ø x H); with surface-mounting base 112 x 59 mm (Ø x H)Type of protection: IP 42With VdS approval


— Note: The wired connection of the ARGUS smoke detector Connect art. no. 5480.. is not permitted. With pipe cabling systems a gas-ket must be installed on site between the ceiling and the smoke detector.Contents: Battery.Screws and plugs.Surface-mounted mounting base with a larger wiring compartment.



ww

w.m

erte

n.co

m


Smoke detector

J

418 ARGUS SMOKE DETECTORS | Accessories | ©2010

ARGUS smoke detector BasicBattery-powered smoke detector for early detec-tion of smouldering fires and open fires with development of smoke indoors.Functions:• Self-test• Continuous battery monitoring. A weak battery



Functional principle: scattered light (Tyndall effect)Sensitivity: in accordance with EN 14604Battery type: 9 V monobloc battery, IEC 6LR61, alkaliBattery failure signal: approx. every 40 seconds, for at least 30 daysBattery life: approx. 3 yearsSignal: approx. 85 dB(A) at 3 m distanceDisplay elements: red LEDOperating ambient temperature: 0 °C to 60 °CDimensions: 112 x 44 mm (Ø x H)Type of protection: IP 42With VdS approval

˜ Accessories: Sealing pins for ARGUS smoke detector, Art. No. 547000.

– Technical Information— Contents: Battery.Screws and plugs.


polar white 547019 1/23 8.3

ARGUS smoke detector Basic LonglifeBattery-powered smoke detector for early detec-tion of smouldering fires and open fires with smoke emission indoors.With lithium battery for extended service life. Functions:• Self-test• Continuous battery monitoring. A weak battery



Functional principle: scattered light (Tyndall effect)Sensitivity: in accordance with EN 14604Battery type: 9 V monobloc battery, lithiumBattery failure signal: approx. every 40 seconds, for at least 30 daysBattery life: approx. 10 yearsSignal: approx. 85 dB(A) at 3 m distanceDisplay elements: red LEDOperating ambient temperature: 0 °C to 60 °CDimensions: 112 x 44 mm (Ø x H)Type of protection: IP 42With VdS approval

˜ Accessories: Sealing pins for ARGUS smoke detector, Art. No. 547000.

– Technical Information— Contents: Battery.Screws and plugs.


polar white 547119 1/23 8.3

Accessories

Flush-mounted system relay for ARGUS smoke detectorThe relay is connected to ARGUS smoke detectors and thus acts to forward a smoke alarm to exter-nal alarm devices. Depending on the smoke detector, this must be connected either via a sep-arate core in the 230V mains network or per radio.The relay is powered with mains voltage and has a floating make contact for the external alarm device. You can connect for example the following alarm devices: horns, warning lights, vibration cushions for the deaf, or KNX binary inputs. These devices must have their own power supply. Suitable for installation in a size 60 installation box.Supply voltage: AC 230 VContact type: Make contact, floating (SELV)Switching current: AC 230 V, µ 4 A / DC 24 V, µ 2 AConnecting terminals: for 2.5 mm2

Dimensions: 44 x 50 x 34 mm (WxHxD)

˜ To be completed with: ARGUS Connect smoke detector art. no. 5480... ARGUS Connect smoke detector 230 V, art. no. 5485.. ARGUS smoke detector 230 V, art. no. 5475..


black 548001 1/60 8.3

Sealing pin for ARGUS smoke detectorFor direct display of smoke detector manipula-tion. When the smoke detector is removed, a sealing pin inserted into the mounting base breaks.

˜ Accessories from: ARGUS Connect smoke detector art. no. 5480... ARGUS Connect smoke detector 230 V art. no. 5485.. ARGUS smoke detector 230 V art. no. 5475.. ARGUS Basic smoke detec-tor 230 V art. no. 547019. ARGUS Basic Longlife smoke detector 230 V art. no. 547119.

— Contents: 1 PU = 50 sealing pins


black 547000 1/50 8.3


ww

w.m

erte

n.co

m

Smoke detector

J

©2010 | Accessories | ARGUS SMOKE DETECTORS 419

420

ww

w.m

erte

n.de

Network techNology | ©2010

Network technology

Internet access in every room – the

wide variety of components of

Merten's network technology make it

possible. With only minor installation

effort, any existing telephone socket

can be replaces with a Line 21 socket.

The Line 21 connection socket allows

the existing four-wire connection to be

used for the telephone as well as to

surf the internet or establish a PC

network. The only prerequisites are a

four-wire connection between the

rooms and a telephone socket. The

necessary equipment includes a Line

21 connection socket RJ45 8/8, which

must be located near the existing

telephone socket, and a Line 21

combination socket to replace the

existing telephone socket at the PC.

FleXIBle NetworkINg Network techNology

Splitter modem

1st telephone socket

Line21RJ45 8/8

Line21combination socket-outlet

Existing cable (max. 50 m)

four-core

Netzwerk-technik

421

ww

w.m

erte

n.de

©2010 | Network techNology

coNteNts

Line 21 Patch panel REG, 6-gang

Switch REG, 5-gang

Netzwerk-technik

ww

w.m

erte

n.co

m

NETWORK TECHNOLOGY

Network technology

E

422 NETWORK TECHNOLOGY | Line 21 | ©2010

Network technologyNetwork technologySystem electronicsNetwork technologyNetwork technologyE

– Technical Information: Network technology

– Technical Information: Line 21

Line 21

Simultaneous transmission of analogue telephone signals and Ethernet using a single existing telephone lineTechnology:• It is not necessary to install an additional line. The existing tele-

phone sockets are simply replaced with Line 21 sockets. This means that the existing telephone line (4-core) becomes an extended network for two services, analogue telephony and PC networking.

Possible applications include analogue telephony plus:• Networking all PCs in the house or• Extension of a DSL link or• Connecting a digital video recorder in the network or• Connecting surveillance cameras with networking capability or• Using printers in a shared network

Line 21 Combination socket-out-let RJ45/TAEWith integrated Line 21 technology.For connecting an analogue telephone/telecom-munications system (TAE) and a digital network device (RJ45, 8-pole) such as PC, HUB, router, Merten switch (art. no. 465711) or IC 1 (art. no. 6950.., 6951...)With 4 screw terminals for the installation line and 2 for the connection of additional telephone socket-outlets.





8(6)-6F+N 465709 1/60 1

Line 21 RJ45 insert 8/8With integrated Line 21 technology.For connecting an analogue telephone/telecom-munications system (RJ45, 8-pole) and a digital network device (RJ45, 8-pole) such as PC, HUB, router, Merten switch (art. no. 465711) or IC 1 (art. no. 6950.., 6951...)With 4 screw terminals for the installation line and 2 for analogue telephony.





465708 1/60 1

Line 21 Patch panel REG, 6-gangWith integrated Line 21 technology.Distribution board for simple changing of jumper cables without altering the wiring. With six locka-ble RJ45 ports, LSA+ terminal blocks. For instal-lation on DIN rails EN 50022.For connecting analogue telephones/telecommu-nications systems and digital network devices (RJ45, 8-pole) such as PC, HUB, router, Merten switch (art. no. 465711) or IC 1 (art. no. 6950.., 6951...)With 2 LSA+ terminal blocks for the installation line and analogue telephony.

Cable length: max. 50 mTransmission rate: max. 100 Mbit/s (per installed line)Type of protection: IP 20Device width: 6 modules = 108 mm

˜ Accessories: Patch cable RJ45/RJ45, art. no. 465710.– Technical Information


light grey 465714 1/16 1

Line 21 Patch cable RJ45/TAECable for connecting Line 21 RJ45 insert (art. no. 465708) and analogue telephones/telecommu-nications systems.

Length: 35 cm


grey/black 465713 1/150 1

Network components

Patch panel REG, 6-gangDistribution board for simple changing of jumper cables without altering the wiring. With six locka-ble RJ45 ports, LSA+ terminal blocks. For instal-lation on DIN rails EN 50022.

Category: CAT 5eType of protection: IP 20Device width: 6 modules = 108 mm

˜ Accessories: Patch cable RJ45/RJ45, art. no. 465710.


light grey 465712 1/16 1

Switch REG, 5-gangFor targeted distribution of data to individual sub-scribers. The switch supports a data transfer rate of up to 100 Mbps. With five lockable RJ45 ports and integrated power supply unit.For installation on DIN rails EN 50022.

Supply voltage: AC 230 VCategory: CAT 5eDisplay elements: LEDs per port for operating display and service functionType of protection: IP 20Device width: 6 modules = 108 mm

˜ Accessories: Patch cable RJ45/RJ45, art. no. 465710.


light grey 465711 1/15 1

NETWORK TECHNOLOGY

ww

w.m

erte

n.co

m

Network technology

E

©2010 | Communications inserts and accessories | NETWORK TECHNOLOGY 423

Patch cable RJ45/RJ45Cable for establishing a connection between the patch panel and the switch.

Length: 35 cm


grey 465710 10/150 1

Communications inserts and accessories

RJ45 insert 8For connecting analogue or digital terminals using an 8-pole RJ45 socket.With screw terminals.



465720 10/50 1

RJ45 insert 8 Cat 5eFor connecting analogue or digital terminals using an 8-pole RJ45 socket.Connection via LSA terminals.



465721 1/50 1

Central plate for RJ45 insert, 1-gangFor System M.For RJ45 inserts 8 (Cat 5e), RJ45 inserts by Rutenbeck or E-DAT designs by BTR.

˜ To be completed with: RJ45 insert 8, art. no. 465720. RJ45 insert 8 Cat 5e, art. no. 465721.



˜ Thermoplastic classy mattwhite 298344 10/120 1polar white 298319 10/120 1anthracite 298314 10/120 1.1aluminium 298360 10/120 1.1


Central plate for RJ45 insert, 1-gangWith labelling field.For System Design.For RJ45 inserts 8 (Cat 5e), RJ45 inserts by Rutenbeck or E-DAT designs by BTR.

˜ To be completed with: RJ45 insert 8, art. no. 465720. RJ45 insert 8 Cat 5e, art. no. 465721.Accessories: Labelling strips for switches, socket-outlets, art. no. 395019


˜ Thermoplastic brilliantwhite 291844 10/120 1polar white 291819 10/120 1aluminium 291860 10/120 1.1

˜ metallicstainless steel 291846 10/120 1.1

RJ45 insert 8/8For connecting analogue or digital terminal units via two 8-pole RJ45 connectors.With screw terminals.




white 465701 10/40 1

RJ45 insert 2x8For connecting analogue or digital terminal units via two 8-pole RJ45 connectors connected in par-allel with bus-type cabling.With screw terminals.




white 465702 10/40 1

RJ45 insert 8/8 Cat 5eFor connecting analogue or digital terminal units via two 8-pole RJ45 connectors.Connection via LSA terminals.



white 465703 1/50 1

ww

w.m

erte

n.co

m

NETWORK TECHNOLOGY

Network technology

E

424 NETWORK TECHNOLOGY | Communications inserts and accessories | ©2010

RJ45 insert 8/8 Cat 6For connecting analogue or digital terminal units via two 8-pole RJ45 connectors.Connection via LSA terminals.



white 465706 1/50 1

Central plate for RJ45 insert, 2-gangFor System M.For RJ45 inserts 8/8, 2x8, Line 21 RJ45 insert 8/8, RJ45 inserts by Rutenbeck or E-DAT designs by BTR.

˜ To be completed with: RJ45 insert 8/8, art. no. 465701. RJ45 insert 2x8, art. no. 465702. RJ45 insert 8/8 Cat 5e, art. no. 465703. RJ45 insert 8/8 Cat 6, art. no. 465706.





Central plate for RJ45 insert, 2-gangWith labelling field.For System Design.For RJ45 inserts 8/8, 2x8, Line 21 RJ45 insert 8/8, RJ45 inserts by Rutenbeck or E-DAT designs by BTR.

˜ To be completed with: RJ45 insert 8/8, art. no. 465701. RJ45 insert 2x8, art. no. 465702. RJ45 insert 8/8 Cat 5e, art. no. 465703. RJ45 insert 8/8 Cat 6, art. no. 465706.Accessories: Labelling strips for switches, socket-outlets, art. no. 395019


˜ Thermoplastic brilliantwhite 292644 10/120 1polar white 292619 10/120 1light grey 292629 10/120 1.2dark brazil 292615 10/120 1.2black grey 292669 10/120 1.2aluminium 292660 10/120 1.2

˜ metallicantique brass 292643 10/120 1.4stainless steel 292646 10/120 1.2

Central plate for RJ45 insert, 2-gangFor OCTOCOLOR.For RJ45 inserts 8/8, 2x8, Line 21 RJ45 insert 8/8, RJ45 inserts by Rutenbeck or E-DAT designs by BTR.

˜ To be completed with: RJ45 insert 8/8, art. no. 465701. RJ45 insert 2x8, art. no. 465702. RJ45 insert 8/8 Cat 5e, art. no. 465703. RJ45 insert 8/8 Cat 6, art. no. 465706.




292042 10/120 1.2

varnished titanium 292005 10/120 1.2

Combination socket-outlet RJ45/TAE (Cat 3)For connecting a telephone and an analogue or digital terminal unit via the 8-pole RJ45 connec-tor.With screw terminals.




8(6)-6F+N, white 465707 1/60 1

Central plate for telephone socket-outlet TAEFor System M.For telephone socket-outlets TAE or TDO, combi-nation socket-outlets RJ45/TAE or flush-mounted USB interface.

˜ To be completed with: Telephone socket-outlet TAE, art. no. 4652... Loudspeaker connection insert art. no. 4669.., 4670... USB interface, flush-mounted, art. no. 681799. Telephone socket-outlet TDO, art. no. 465930.





NETWORK TECHNOLOGY

ww

w.m

erte

n.co

m

Network technology

E

©2010 | Communications inserts | NETWORK TECHNOLOGY 425

Central plate for telephone socket-outlet TAEFor System Design.For telephone socket-outlets TAE or TDO, combi-nation socket-outlets RJ45/TAE or flush-mounted USB interface.

˜ To be completed with: Telephone socket-outlet TAE, art. no. 4652... Loudspeaker connection insert art. no. 4669.., 4670... USB interface, flush-mounted, art. no. 681799. Telephone socket-outlet TDO, art. no. 465930.Accessories: Labelling strips for switches, socket-outlets, art. no. 395019


˜ Thermoplastic brilliantwhite 297844 1/150 1polar white 297819 1/150 1light grey 297829 1/150 1.2dark brazil 297815 1/150 1.2black grey 297869 1/150 1.2aluminium 297860 1/150 1.2

˜ metallicantique brass 297843 1/150 1.4stainless steel 297846 1/150 1.2

Central plate for telephone socket-outlet TAEFor telephone socket-outlets TAE or TDO, combi-nation socket-outlets RJ45/TAE or flush-mounted USB interface.




˜ metallicbronze metallic 293842 1/150 1.2titanium 293805 1/150 1.2

Communications inserts

Inclined outletFor data connection and communications tech-nology.Order the associated inserts separately.

˜ To be completed with: Communications inserts, art. no. System M and System Design 464379-99.

– Technical Information— Note: The inclined outlet does not look attractive when installed

on the 1-M or ATELIER-M frame. We recommend using the M-SMART or M-PLAN frame for this.Contents: Without inserts.





Inclined outletFor data connection and communications tech-nology.Order the associated inserts separately.With labelling field.To be labelled with labelling strips.

˜ To be completed with: Communications inserts, art. no. System M and System Design 464379-99.Accessories: Labelling strips for switches, socket-outlets, art. no. 395019

– Technical Information— Contents: Without inserts.


˜ Thermoplastic brilliantwhite 464344 1/50 1polar white 464319 1/50 1light grey 464329 1/50 1.2dark brazil 464315 1/50 1.2black grey 464369 1/50 1.2

˜ metallicaluminium 464360 1/50 1.2stainless steel 464346 1/50 1.2

Insert for modular jack connector Cat 5For modular jack Cat 5, RJ 45 connector or AMP connector.Second opening can be broken out.

˜ To be completed with: Inclined outlet, art. no. System M 4649.., 4646.., System Design 4643...Accessories: Modular jack connector Cat 5, art. no. 465595.


black 464399 10/300 1

ww

w.m

erte

n.co

m

NETWORK TECHNOLOGY

Network technology

E

426 NETWORK TECHNOLOGY | Communications inserts | ©2010

Insert for modular jack connectorFor two modular jack connectors Cat 3For AMP or Thomas & Betts connectors.Second opening can be broken out.

˜ To be completed with: Inclined outlet, art. no. System M 4649.., 4646.., System Design 4643...Accessories: Modular jack connector Cat 3, art. no. 465516/18.


black 464398 10/300 1

Insert for Thomas & Betts data communication connectorsFor data connectors from Thomas & Betts and IBM inserts IBM ACS type G.

˜ To be completed with: Inclined outlet, art. no. System M 4649.., 4646.., System Design 4643...


black 464394 10/300 1

Insert for Reichle & De-MassariFor two Reichle & De Massari connection mod-ules or additional R&M modules.Information: http://www.rdm.com

˜ To be completed with: Inclined outlet, art. no. System M 4649.., 4646.., System Design 4643...Accessories: Reichle & De-Massari connection module, unshielded, art. no. 465580/82. Reichle & De-Massari connection module, shielded, art. no. 465581/83. Reichle & De-Massari splash flange, art. no. 465591. Reichle & De-Massari splash sleeve, art. no. 465590.


black 464384 10/300 1

Inclined outletFor data connection and communications tech-nology.Order the associated inserts separately.With labelling field.

˜ To be completed with: Communications inserts, art. no. OCTO-COLOR 463386-99.

– Technical Information— Contents: Without inserts.




463342 1/50 1.2

varnished titanium 463305 1/50 1.2

Insert for modular jack connector Cat 5For modular jack Cat 5, RJ 45 connector or AMP connector.

˜ To be completed with: Inclined outlet, art. no. OCTOCOLOR 463344/19/42/05.Accessories: Modular jack connector Cat 5, art. no. 465595.


˜ Thermoplastic brilliantblack 463399 10/300 1

Insert for modular jack connectorFor two modular jack connectors Cat 3For AMP or Thomas & Betts connectors.Second opening can be broken out.

˜ To be completed with: Inclined outlet, art. no. OCTOCOLOR 463344/19/42/05.Accessories: Modular jack connector Cat 3, art. no. 465516/18.


˜ Thermoplastic brilliantblack 463398 10/300 1

Modular jack connector, Cat 3WE Western type.In line with US FCC 86, Cat 3.Connection with IDC clamping method.

Pin configuration Telecom/ISDN modular jack/8-pole: 1a/4, 1b/5, 2a/3, 2b/6.

˜ To be completed with: Supporting plate for modular jack connec-tor, art. no. 461590. Insert for modular jack connector, art. no. System M 464398, System Basis 461398, System Design 464398, OCTOCOLOR 463398. Central plate for modular jack con-nector, art. no. System M 2901.., 2957.., System Basis 2929...



465516 5/250 1


465518 5/250 1

Modular jack connector, Cat 5WE Western type.In line with US FCC 86, Cat 5.Connection via LSA terminals.

˜ To be completed with: Supporting plate for modular jack connec-tor, art. no. 461593. Insert for modular jack connector, art. no. System M 464399, System Basis 461399, System Design 464399, OCTOCOLOR 463399.



465595 5/120 1

NETWORK TECHNOLOGY

ww

w.m

erte

n.co

m

Network technology

E

©2010 | Communications technology | NETWORK TECHNOLOGY 427

Reichle & De-Massari connection module, unshieldedConnection with ICD clamping method (no equip-ment necessary).



Cat 5e, 1xRJ45/u 465580 2/100 1Cat 6, 1xRJ45/u 465582 2/100 1

Reichle & De-Massari connection module, shieldedConnection with ICD clamping method (no equip-ment necessary).



Cat 5e, 1xRJ45/s 465581 2/100 1Cat 6, 1xRJ45/s 465583 2/100 1

Communications technology

Central plate for RJ 11/RJ 45 insert, 1-gangFor System M.For Lexcom modules.



˜ Thermoplastic classy mattwhite MEG4541-0444 5/150 1 newpolar white MEG4541-0419 5/150 1 newanthracite MEG4541-0414 5/150 1.1 newaluminium MEG4541-0460 5/150 1.1 new


Central plate for RJ 11/RJ 45 insert, 2-gangFor System M.For Lexcom modules.





Central plate for modular jack connectorFor two modular jack connectors Cat 3.For AMP or Thomas & Betts connectors.Without claws, for screw fixing.

˜ To be completed with: Modular jack connector Cat 3, art. no. 465516/18.

– Technical Information— Contents: With sealing plug for one opening.





Central plate for modular jack connector with shut-off slideSuitable for the supporting plates for modular jack connectors. With two openings and shut-off slide.

˜ To be completed with: Supporting plate for modular jack connec-tor, art. no. 4615...






ww

w.m

erte

n.co

m

NETWORK TECHNOLOGY

Network technology

E

428 NETWORK TECHNOLOGY | Communications technology | ©2010

Supporting plates for modular jack connectorSuitable for communication connectors.Supporting plate (art. no. 461590) for Cat 3 mod-ular jack connector and supporting plate (art. no. 461593) for Cat 5 modular jack connector.

˜ To be completed with: Central plate for modular jack connector with shut-off slide, art. no. System M 4619.., 4617.., System Basis 4615...Accessories: Modular jack connector Cat 3, art. no. 465516/18. Modular jack connector Cat 5, art. no. 465595.



red 461590 4/240 1transparent 461591 4/240 1black 461592 4/240 1yellow 461593 4/240 1green 461594 4/240 1

NETWORK TECHNOLOGY

ww

w.m

erte

n.co

m

Network technology

E

©2010 | Communications technology | NETWORK TECHNOLOGY 429

430

ww

w.m

erte

n.de

KNX system devices | ©2010

iNteLLiGeNce tHROUGHOUt tHe HOmeKNX system devices

KNX system characteristics

Equipped for the future with KNX: the

data is recorded by sensors and sent

via a twin-core bus device to the

actuators to control their activity.

Sensors record information. This

information can include room tempera-

ture, movements, or manually entered

instructions, which are transmitted as

data across the KNX bus system.

The actuators receive data that is

then converted into actions, such as

lowering or raising a blind, or dimming

a light.

System devices and components

are needed to operate the system.

They consist of power supply units for

generating bus voltage, couplers for

connecting bus segments and inter-

faces for connecting programming

devices. Sensors generally only need

the bus line but actuators usually need

the 230V mains supply as well to

control the loads. Bus line and mains

supply are separated from each other.

KNX system devices

431

ww

w.m

erte

n.de

©2010 | KNX system devices

cONteNtsKNX system devices

REG-K emergency power supply

Now choosing and ordering KNX articles is even easier. You will quickly find the required components in the System devices, Sensors and Actuators sections.

KNX system devices starting on page 430

• Power supply units• Bus coupler• IP routers• Interfaces/gateways• Accessories

KNX seNsORs starting on page 442

• Push-button• Room temperature control unit• Binary inputs• Movement and presence detectors• Time switches• Devices for display and operation


KNX actUatORs starting on page 482

• Switch actuators• Blind actuators• Dimming actuators• Room temperature control unit• Devices for display and operation

KNX pOweR sUppLy: tHe sOLUtiON fOR aLL yOUR ReqUiRemeNts

KNX pOweR sUppLy

KNX pOweR sUppLy UNit witH emeRGeNcy iNpUt

available in these versions:• 160 mA• 320 mA• 640 mAfor one line each of bus devices

available in these versions:• 160 mA• 320 mA• 640 mAfor one line each of bus devices

KNX system devices

ww

w.m

erte

n.co

m

KNX SYSTEM DEVICES/ACCESSORIES

KNX system devices

K

432 KNX SYSTEM DEVICES/ACCESSORIES | Bus voltage supply | ©2010

KNX system devicesKNX system devices/accessoriesKNX systemKNX system devices/accessoriesK

– Technical Information: KNX system characteristics

The current product database can be obtained by calling the fol-lowing telephone number or from the Internet at http://www.merten.com• E-mail: [email protected]• Tel.: 02261 702-286• Fax: 02261 702- 633• Technical information / Infoline• E-mail: [email protected]• Tel.: 0800 63783640• Fax: 0800 63783630

Bus voltage supply

• The devices have protection type IP 20 and can only be used indoors. Devices with a different type of protection are labelled separately.

KNX power supply REG-K/160 mAFor generating the bus voltage for a line with up to 32 bus devices.With integrated choke to decouple the power sup-ply from the bus and a push-button to disconnect the power and reset the bus devices connected to the line.For installation on DIN rails EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.Mains voltage: AC 110 - 230 V, 50-60 HzOutput voltage: DC 30 VOutput current: max. 160 mA, short-circuit-proofDevice width: 4 TE = approx. 72 mm

— Contents: With bus connecting terminal and cable cover.


light grey 684016 1/10 9.3

KNX power supply REG-K/160 mA with emergency power inputFor generating the bus voltage for a line with up to 32 bus devices. The emergency power supply REG can be connected in order to buffer the bus voltage.With integrated choke to decouple the power sup-ply from the bus and a push-button to disconnect the power and reset the bus devices connected to the line.For installation on DIN rails EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.Mains voltage: AC 110 - 230 V, 50-60 HzOutput voltage: DC 30 VOutput current: max. 160 mA, short-circuit-proofDevice width: 4 TE = approx. 72 mm

˜ Accessories: REG emergency power supply, art. no. 683901.— Contents: With bus connecting terminal and cable cover.


light grey 683816 1/10 9.3

KNX power supply REG-K/320 mAFor generating the bus voltage for a line with up to 64 bus devices.With integrated choke to decouple the power sup-ply from the bus and a push-button to disconnect the power and reset the bus devices connected to the line.For installation on DIN rails EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.Mains voltage: AC 110 - 230 V, 50-60 HzOutput voltage: DC 30 V Output current: max. 320 mA, short-circuit-proofDevice width: 4 TE = approx. 72 mm



light grey 684032 1/10 9.3

KNX power supply REG-K/320 mA with emergency power inputFor generating the bus voltage for a line with up to 64 bus devices. The emergency power supply REG can be connected in order to buffer the bus voltage.With integrated choke to decouple the power sup-ply from the bus and a push-button to disconnect the power and reset the bus devices connected to the line.For installation on DIN rails EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.Mains voltage: AC 110 - 230 V, 50-60 HzOutput voltage: DC 30 V Output current: max. 320 mA, short-circuit-proofDevice width: 4 TE = approx. 72 mm



light grey 683832 1/10 9.3

KNX power supply REG-K/640 mAFor generating the bus voltage for a line with up to 64 bus devices.With integrated choke to decouple the power sup-ply from the bus and a push-button to disconnect the power and reset the bus devices connected to the line.For installation on DIN rails EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.Mains voltage: AC 110 - 230 V, 50-60 HzOutput voltage: DC 30 V Output current: max. 640 mA, short-circuit-proofDevice width: 4 TE = approx. 72 mm



light grey 684064 1/10 9.3


ww

w.m

erte

n.co

m

KNX system devices

K

©2010 | System components | KNX SYSTEM DEVICES/ACCESSORIES 433

KNX power supply REG-K/640 mA with emergency power inputFor generating the bus voltage for a line with up to 64 bus devices. The emergency power supply REG can be connected in order to buffer the bus voltage.With integrated choke to decouple the power sup-ply from the bus and a push-button to disconnect the power and reset the bus devices connected to the line.For installation on DIN rails EN 60715. The bus is connected using a bus connecting terminal; a data rail is not necessary.Mains voltage: AC 110 - 230 V, 50-60 HzOutput voltage: DC 30 VOutput current: max. 640 mA, short-circuit-proofDevice width: 4 modules = approx. 72 mm



light grey 683890 1/10 9.3

REG emergency power supplyTo buffer the bus voltage. If a complete mains failure occurs, an external lead gel battery with a voltage of DC 12 V (SELV) can be connected to the REG power supply for buffering. The lead gel battery is recharged or maintained in its charged state by integrated charging electronics.A binary input can be connected in order to regis-ter the operational statuses (mains voltage, error warning, battery operation).For installation on DIN rails EN 60715. A data rail is not necessary.Mains voltage: AC 110 - 230 V, 50-60 HzOutput to power supply:Output voltage: DC 30 V ±2 VOutput current:without battery with mains supply max. 300 mA, with battery without mains supply max. 640 mAShort-circuit current: < 1.5 A

Charging current: max. 1 AConnections: plug-in screw terminal for main connector, operating state (4-pin, 3 floating con-tacts) and emergency power supply. Plug-in termi-nal for battery connection (two 1 mm pins)Device width: 4 modules = approx. 72 mm

˜ In KNX, to be completed with: KNX power supply REG-K/160 mA with emergency power input, art. no. 683816. KNX power supply REG-K/320 mA with emergency power input, art. no. 683832. KNX power supply REG-K/640 mA with emergency power input, art. no. 683890.Accessories: Lead gel battery, art. no. 668990. Lead gel battery, art. no. 668991. Binary input REG-K/4x24, art. no. 644892. Power supply REG, DC 24 V/0.4 A, art. no. 693003.

— Contents: With connecting terminal and cable cover


light grey 683901 1/10 9.3

Lead gel batteryLead gel battery to connect to the emergency input of the power supply 320 REG-K with battery connection.Also for powering the outdoor siren with flash-light, TeleConnect or IC 1 Internet controller.

Nominal voltage: DC 12 VCapacity: 7.2 Ah

˜ In KNX, to be completed with: REG emergency power supply, art. no. 683901.


7.2 Ah 668990 1/2 8.2

Lead gel batteryLead gel battery for connecting to the emergency power supply REG.

Nominal voltage: DC 12 VCapacity: 18 Ah

˜ In KNX, to be completed with: REG emergency power supply, art. no. 683901.


668991 1/1 8.2

System components


Coupler REG-KFor logical connection and electrical isolation of lines and areas. For mounting on DIN rails EN 50022.The bus is connected using a bus connecting ter-minal; a data rail is not necessary. Contact estab-lished with the primary and secondary line via bus connecting terminal.


— Contents: With 2 bus connecting terminals.


light grey 680204 1/35 9.3

ww

w.m

erte

n.co

m


KNX system devices

K

434 KNX SYSTEM DEVICES/ACCESSORIES | System accessories | ©2010

KNX/IP router REG-KThe KNX/IP router enables telegrams to be for-warded between different lines via LAN (IP) as a rapid backbone. The device can additionally serve as a programming interface in order to con-nect a PC with the KNX bus (e.g. for ETS program-ming with suitable ETS).The IP address can be assigned dynamically via a DHCP server or via manual configuration (ETS parameter). The device operates in accordance with the KNXnet/IP specification using Core, device management, tunnelling and routing. The KNX/IP router forwards telegrams in both directions whilst taking a filter table into account and can buffer up to 150 telegrams.For installation on DIN rails EN 50022. The bus is connected using a bus connecting terminal; a data rail is not necessary.

Supply voltage: DC 12-30 V (at DC 24 V 40 mA), AC 12-24 VDevice width: 2 modules = approx. 36 mm

˜ In KNX, to be completed with: Power supply REG, DC 24 V/0.4 A, art. no. 693003. Power supply REG, DC 24 V/1.25 A, art. no. 693004. Power supply REG, AC 24 V / 1 A, art. no. 663529. Also alternatively Power over Ethernet (PoE).

— Contents: With bus connecting terminal.


light grey 680329 1/70 9.3

System accessories


Power supply REG, 24 V DC / 0.4 APower supply for 24 V binary inputs, Internet Con-troller REG-K, REG-K panel control, KNX/IP router REG-K.For installation onto DIN rails EN 50022. With integrated overload and short-circuit protec-tion.

Primary supply: AC 230 V, 48-63 HzOutput voltage: DC 24 V +/- 3 %Output current: max. 0.4 AOutput power: max. 10 WDevice width: 1 module = approx. 18 mm

˜ For supplying power to: Binary input REG-K/8x24 art. no. 644792. Panel control REG-K/12x24 art. no. 675001. Panel con-trol REG-K/8-4x24 art. no. 675101. Universal I/O panel control REG-K/32x24 art. no. 675201. KNX/IP router REG-K art. no. 680329. KNX Internet Controller IC1-V2 REG-K, merten@home, art. no. 6951...


light grey 693003 1/60 9.3

Power supply REG, 24 V DC / 1.25 APower supply for 24 V binary inputs, REG-K panel control, KNX/IP router REG-K, 10" IP touch panel.For installation onto DIN rails EN 50022. With integrated overload and short-circuit protec-tion.

Primary supply: AC 100-240 V, 50-60 HzOutput voltage: DC 24 V +/- 3 %Output current: max. 1.25 AOutput power: max. 30 WDevice width: 4 modules = approx. 72 mm

˜ For supplying power to: Binary input REG-K/8x24 art. no. 644792. Panel control REG-K/12x24 art. no. 675001. Panel con-trol REG-K/8-4x24 art. no. 675101. Universal I/O panel control REG-K/32x24 art. no. 675201. KNX/IP router REG-K art. no. 680329. IP touch panel 10" art. no. 683090.


light grey 693004 1/15 9.3

Power supply REG, AC 24 V/1 APower supply for 24 V binary inputs, weather sta-tion REG-K/4-gang, analogue input module REG-K/4-gang, rain sensor, wind sensor with 0 - 10 V interface and heating, KNX/IP router REG-K.For installation onto DIN rails EN 50022. With fuse.

Primary supply: AC 230 V, +/- 10 %, 50-60 HzOutput voltage: AC 24 VOutput current: max. 1 AFuse: 5x20 mm, 250 V, T 160 mADevice width: 5 modules = approx. 90 mm

˜ For supplying power to: Binary input REG-K/8x24 art. no. 644792. Weather station REG-K/4-gang, art. no. 682991. Ana-logue input module REG/4-gang art. no. 682192. Rain sensor for art. no. 663595. Wind sensor with 0-10V interface and heating, art. no. 663592. KNX/IP router REG-K art. no. 680329. Thermoe-lectric valve drive 24 V art. no. 639126.

— Contents: With spare fuse.


light grey 663529 1/15 9.3

Data rail connector REG/4For connecting up to eight bus lines and power supplies to the data rail via bus connecting termi-nals. For mounting on DIN rails EN 50022-35 x 7.5, with integrated data rail.

Device width: 1 module = approx. 18 mm

˜ In KNX, to be completed with: Data rail, art. no. 6899 ..— Contents: With 2 bus connecting terminals.


light grey 680602 2/140 9.3

Data railFor connecting KNX devices installed in series in distribution panels on DIN rail. For bonding (self-adhesive) into the DIN rail EN 50022-35 x 7.5.

˜ Accessories: Data rail cover, art. no. 689801.


214 mm 689901 5/500 9


ww

w.m

erte

n.co

m

KNX system devices

K

©2010 | System accessories | KNX SYSTEM DEVICES/ACCESSORIES 435

Data rail coverFor covering unused data rail connectors by snap-ping onto the DIN rail EN 50022 35x7.5.

Length: 242 mm

˜ In KNX, to be completed with: Data rail, art. no. 6899 ..


light grey 689801 5/50 9

Bus connecting terminalFor connecting max. 4 core pairs to an KNX device, can also be used as a branch terminal.Consists of two interlocked terminal parts in red ("+") and dark grey ("-"), each with 4 plug-in termi-nals. For solid conductors with a diameter of 0.6 to 0.8 mm.


red/dark grey 689701 50/2500

9

Branch terminal, yellow/whiteBranch terminal comprising two interlocking ter-minal parts in yellow and white, each with 4 plug-in terminals. For solid conductors with a diameter of 0.6 to 0.8 mm. For wiring the yellow/white cores of the bus cable.


yellow/white 689702 50/2500

9

Cable cover for REG-KFor covering the stripped bus cable in all REG-K devices. The cable cover guarantees a safe dis-tance between the SELV bus voltage and the mains voltage.


light grey 662929 5/500 9

Protective cover for plasterFor protecting the bus coupler, flush-mounted actuators, Easy flush-mounted modules or actua-tors from damage during painting and decorating work.

˜ In KNX, to be completed with: Bus coupler, flush-mounted, art. no. 690099. Bus coupler, flush-mounted 2, art. no. 690299. Switch actuator, flush-mounted, art. no. 627099. Series actuator, flush-mounted, art. no. 627199. Blind actuator, flush-mounted, art. no. 627299.


black 690098 10/300 9

Blanking coverFor System M.Screw-on cover for flush-mounted bus coupler or flush-mounted actuators.






Blanking coverFor System Design.Screw-on cover for flush-mounted bus coupler or flush-mounted actuators.





662246 1/100 9

ww

w.m

erte

n.co

m


KNX system devices

K

436 KNX SYSTEM DEVICES/ACCESSORIES | Function module | ©2010

Function module


KNX Logic module Basic REG-KIn KNX installations, the logic module serves as a logic and control device. It has 10 logic, 10 filter/timer, 8 converter and 12 multiplexer modules.With 3 freely programmable push-buttons and 3 status LEDs. They can be assigned control and test functions and can be operated on the device.

KNX software functions:10 logic modules (AND, OR, XOR)• Each with up to 8 binary input objects and an

output object.• Input and output object inversion.• Output disable via gate function.• Behaviour of each input object after bus reset.• Adjustable sending behaviour.10 filter and timer modules• Binary input objects and an output object with

time delays.• Binary input object filtering before output.• Output disable via gate function.• Behaviour of each input object after bus reset.• Adjustable sending behaviour.8 converter modules• Conversion of 1 bit switching telegrams into 2

bit priority control.• Conversion of 1 bit switching telegrams into 8

bit value telegrams.• Conversion of 8 bit value telegrams into 1 bit

switching telegrams.• Output disable via gate function.• Behaviour of each input object after bus reset.• Adjustable sending behaviour.12 multiplexer modules (lighting control)Multiplexer modules are used to selectively con-trol telegrams, e.g. to toggle between single room and total room control for conference rooms with partition walls.• Supported telegram formats by module: 1 bit,

2 bit, 4 bit, 8 bit , 2 byte.• A module can be used for the 4 byte format.• Telegram forwarding/blocking in one or both

directions using the control object.• Adjustable gate behaviour.• Adjustable control object behaviour.• Output disable via gate function.• Adjustable sending behaviour.• Adjustable sending delay.Push-button and LED assignment• The three push-buttons and the three LEDs

can be freely assigned with binary objects.• Behaviour per LED.• Behaviour per push-button.Behaviour after bus reset• Adjustable module start-up delay after bus vol-

tage recovery.

Device width: 2.5 module = approx. 45 mm


light grey 676090 1/30 9.3

Mini-function module REGOpen and closed-loop control tasks are possible using KNX thanks to the mini-function module REG. The received bus telegrams are interpreted and processed according to the freely program-mable logic or mathematical functions.The results are sent to the actuators as tele-grams via the bus (no floating point format).The device is programmed using KNX (no inte-grated RS 232 interface). Projects may comprise 150 function blocks and 200 group addresses. Mini-function module projects can also be proc-essed by the function module REG. A real-time operating system performs control and management of the functional elements, which are programmed in a graphical language. The integrated real-time clock permits precise time-based control sequences. A library of func-tional elements permits creation of programs appropriate to the needs of any application, e.g. for complex heating, lighting and blind control.The mini-function module tool software permits the selection of approx. 40 functional elements with diverse standardised KNX data telegrams from the function library, for combination in appli-cation programs. The programs are then loaded into the device and executed.

Power: A 29 V DC power supply is required via the two outer conductors of the data rail and a data rail connector REG/4. Power consumption: Normal operation approx. 40 mAProgramming mode approx. 100 mADevice width: 3 modules = approx. 54 mm

˜ In KNX, to be completed with: Mini-function module tool soft-ware, art. no. 615011. Data rail, art. no. 6899.., data rail connec-tor REG/4, art. no. 680602.

— Note: The software, art. no. 615011, (Windows 98 or higher) for programming the mini-function module is available on the Internet or on the Merten info CD. The program FM Loader 32 is available over the Internet for operating systems Windows NT, 2000 and XP.


light grey 676099 1/30 9.3


ww

w.m

erte

n.co

m

KNX system devices

K

©2010 | Interfaces/gateways | KNX SYSTEM DEVICES/ACCESSORIES 437

Function module REGExtensive open and closed-loop control tasks are possible using KNX thanks to the function mod-ule REG. The sensors and actuators can be con-nected to the bus locally and cost-effectively. The received bus telegrams are interpreted and proc-essed according to the freely programmable logic or mathematic functions.The results are sent to the actuators as tele-grams via the bus.A real-time multi-tasking operating system per-forms control and management of the functional elements, which are freely programmed in a graphical language. The integrated real-time clock permits precise time-based control sequences. A library of functional elements per-mits creation of programs appropriate to the needs of any application, e.g. for complex heat-ing, lighting and blind control.The function module tool software allows more than 50 functional elements, supporting a variety of standardised KNX data telegrams, to be selected from the function library and assembled into application programs. The programs are then loaded into the device and executed.

Power: A 29 V DC power supply is required via the two outer conductors of the data rail and a data rail connector REG/4. Power consumption: Normal operation approx. 40 mAProgramming mode approx. 100 mADevice width: 3 modules = approx. 54 mm

˜ In KNX, to be completed with: Function module tool software, art. no. 615014. Data rail, art. no. 6899.., data rail connector REG/4, art. no. 680602.


light grey 676029 1/30 9.3

Function module tool softwareThe function module tool software is used to con-figure the application programs of the function module REG.An easy-to-use graphic editor that runs under Windows makes it possible to program the func-tion module on a conventional PC, which can also be used for the ETS program. The program cre-ated with the graphic editor is loaded into the function module via the computer's RS 232 inter-face after compilation (translation into the lan-guage of the function module).The function module and additional program FM Loader 32 can be programmed under Win-dows NT, 2000 and XP operating systems, and also via the bus.

The function module tool software consists of:Graphic editor: Function block library with over 50 function elements, task images and compilers to create programs.Loader: For loading the programs into the func-tion module.Documenter: For creating and printing out the documentation.PC requirements: min. 486 processor with min. 1 MB available space on the hard drive and a free serial interface.

˜ In KNX, to be completed with: Function module REG, art. no. 676029.

— Note: The program FM Loader 32 is available over the Internet for operating systems Windows NT, 2000 and XP.Contents: Program diskettes with manual and copy-protected plug (dongle).


615014 1/1 9.1

Interfaces/gateways


USB interface, flush-mountedFor connecting a programming or diagnostics device with a USB1.1 or USB2 interface to the KNX. For screw mounting in the size 60 installation box. With integrated bus coupler. The device is connected to the bus with a bus connecting ter-minal. Compatible with ETS 3.

Mounting depth: 20 mm

˜ To be completed with: Central plate for telephone socket-outlet TAE, art. no. System M 2960.., 2979.., System Design 2978...



681799 1/50 9

ww

w.m

erte

n.co

m


KNX system devices

K

438 KNX SYSTEM DEVICES/ACCESSORIES | Interfaces/gateways | ©2010

Central plate for telephone socket-outlet TAEFor System M.For telephone socket-outlets TAE or TDO, combi-nation socket-outlets RJ45/TAE or flush-mounted USB interface.






Central plate for telephone socket-outlet TAEFor System Design.For telephone socket-outlets TAE or TDO, combi-nation socket-outlets RJ45/TAE or flush-mounted USB interface.

˜ To be completed with: Telephone socket-outlet TAE, art. no. 4652... Loudspeaker connection insert art. no. 4669.., 4670... USB interface, flush-mounted, art. no. 681799. Telephone socket-outlet TDO, art. no. 465930.Accessories: Labelling strips for switches, socket-outlets, art. no. 395019


˜ Thermoplastic brilliantwhite 297844 1/150 1polar white 297819 1/150 1aluminium 297860 1/150 1.2

˜ metallicstainless steel 297846 1/150 1.2

USB interface REG-KFor connecting a programming or diagnostics device with a USB1.1 or USB2 interface to the KNX. For installation on DIN rails EN 50022.The bus is connected using a bus connecting ter-minal; a data rail is not necessary. With inte-grated bus coupler.




light grey 681829 1/35 9.3

INSTABUS radio gateway, flush-mountedThe radio gateway connects the KNX to radio switch sensors and radio actuators. Transmission is bi-directional.The gateway can be installed in a size 60 flush-mounted box or a surface-mounted box.

KNX software functions:From KNX to radio: Switching, toggling, dimming, blinds.From radio to KNX: Switching, toggling, dimming, blinds, edges.

Supply voltage: Bus, DC 24 V, approx. 10 mAChannels: 25 (10 receiving blocks and15 receiving/transmitting blocks)Operating elements: Function selector switch,channel selector switch,programming buttonDisplay elements: LED function displays,programming LEDRadio frequency: 868 MHzTransmission capacity: max. 10 mWRange: up to 100 m (free field)up to 30 m (building)Dimensions: 50x44x33 mm (WxHxD) without antenna and retaining ringType of protection: IP 20

˜ In KNX, to be completed with: Blanking cover, art. no. System M 6623.., 6621... Blanking cover, art. no. System Design 6622...Transmitter: Radio remote control Distance 5010, art. no. 590722. Radio push-button, 1-gang, art. no. System M MEG5091-03../5941.., System Design 5921... Radio push-button, 2-gang, art. no. System M MEG5092-03../5942.., System Design 5922... Universal radio transmitter, flush-mounted, 4-gang, art. no. 592599.Receiver: Plug adapter with radio receiver, art. no. 591019, 591519. Radio receiver, flush-mounted, 1-gang, art. no. 592591.

– Technical Information— Note: Not compatible with Merten CONNECT radio system.

Contents: With bus connecting terminal.


680999 1/50 9


ww

w.m

erte

n.co

m

KNX system devices

K

©2010 | Interfaces/gateways | KNX SYSTEM DEVICES/ACCESSORIES 439

KNX Internet controller IC1-V2 REG-K, merten@homeMonitoring and control of systems and buildings via the Internet.The Internet connection is established using art. no.• 695190 via Ethernet (DSL-router)• 695191 via the integrated analogue modem

(56 kBit/s)• 695192 via the integrated ISDN modem (64 k/

Bits/s)With LAN/Ethernet interface for networking up to 32 additional IC1 devices. The user interface "merten@home" is created using the IC1 configu-rator merten@home 2.0.With integrated bus coupler. For installation on DIN rails EN 60715. The bus is connected using a bus connecting terminal; a data rail is not neces-sary.Power consumption: approx. 5 WPower supply: DC 12-32 VKNX objects: 256Interfaces: 1xRJ45 Ethernet 10/100 Mbit/sArt. no. 695191: 1xRJ45 analogue modem, 56 kBit/sArt. no. 695192: 1xRJ45 ISDN, 64 kBit/sVideo channels: 8 (URL), max. image size depends on the camera usedVideo memory: max. 128 images with 320 x 240 pixel, JPG photo formatHistory memory: 6 input channels, 128,000 data points/channelYear time switch: with 6 programs, DCF77 syn-chronised via DomoportMacros: max. 16 parallel macros, 32 program-mable internal variables, logical, mathematical, comparative and chronological function modules.Device width: 6 TE = approx. 108 mm

˜ In KNX, to be completed with: Power supply REG, DC 24 V/0.4 A, art. no. 693003.Accessories: IC1 configurator merten@home 2.0.

— Contents: User handbook on CD, log on data for Domoport, one 3 m cable each for network and telephone.


without modem, light grey

695190 1/4 9.3

analogue, light grey 695191 1/4 9.3ISDN, light grey 695192 1/4 9.3

TeleController Plus REG-KThe TeleController Plus REG-K connects the tele-phone network with conventional inputs/outputs and KNX.• Six switch outputs for conventional relays or

surge switches.• Six connections, in order to show the current

switching status of the surge switch.• Six signal inputs for break or make contacts.

The TeleController can forward incoming sig-nals to selected participants.

• Up to 20 communication objects for KNX. To control devices or display the statuses.

• Connection for an alarm acknowledgement key to reset active messages, for example.

• Connection to functionally switch off the Tele-Controller.

This is controlled using a conventional DTMF tele-phone or a DTMF hand transmitter. Messages are conveyed by announcements, SMS, e-mail or fax to the selected participants. The corresponding texts can be changed with the handset.The device is operated with a rotary knob and is supported by display texts and announcements. The PC software provided enable convenient operation and configuration.With integrated bus coupler. For installation on DIN rails EN 60715. The bus is connected using screw terminals; a data rail is not necessary.Power supply: DC 12-24 VPower consumption: 90 mA at 24 V (open cir-cuit), 790 mA at 24 V (max. load)Switch outputs: 6, 100 mA at 12 V/24 VAlarm outputs: 1, 100 mA at 12 V/24 VSignal inputs: 6, for floating make or break con-tactsTelephone: Analogue, CTR 21, line length 3 mKNX: Screw terminalsRS 232: Cable length 3 mDevice width: 8 modules = approx. 144 mm

˜ Accessories: Handset, art. no. 660790. Power supply REG, DC 24 V/0.4 A, art. no. 693003. Power supply REG, DC 24 V/1.25 A, art. no. 693004.

— ISDN and GSM version on request.Contents: PC software, connection cable RS 232.


analogue, light grey 680790 1/6 9.3

Handset for TeleControllerSpeech output of the various messages can be monitored and changed with the handset.

˜ In KNX, to be completed with: TeleController Plus REG-K, art. no. 680790.


anthracite 660790 1/8 9.1

ww

w.m

erte

n.co

m


KNX system devices

K

440 KNX SYSTEM DEVICES/ACCESSORIES | Teaching aids | ©2010

Teaching aids

Merten info DVDThe Merten info DVD contains information and data on the products.Contents:• KNX product manual. The book provides

detailed descriptions of KNX devices with elec-trical and mechanical data, as well as descrip-tions of the application programs and the parameters that can be configured.

• Product databases (German/English)• Mini-function module tool software• PLANTEC tool software PTS• Panel programming software EIB TAB 2.• Programming software ETS tool for

MT 701 V2.0• Display tool software DTS• ETS tool for weather station• IC 1 Configuration Cloner, IP Changer• Tender documents (Ansi/Gaeb format)• Documentation on Merten products

— Language: German.

Version Art. no. PU €/item PG Info

616002 1/1 9.9

Merten CDThe interactive CD gives comprehensive informa-tion on the subject of KNX.Uses typical situations in homes, offices and hotels to show how Merten KNX makes life and work easier, more flexible, more productive and more secure. The CD leads you through the Merten product spectrum, giving ideas for new function and demonstrating solutions. Checklists help you determine what components you need, so that system planning can be performed even more efficiently.

— Note: The CD can be ordered over the Internet at www.mymerten.com.Language: German. English.


ww

w.m

erte

n.co

m

KNX system devices

K

©2010 | Teaching aids | KNX SYSTEM DEVICES/ACCESSORIES 441

442

ww

w.m

erte

n.de

KNX seNsors | ©2010

CoMPreHeNsIVe BUILDING MANAGeMeNTKNX seNsors














a light.

KNX sensors

are the first step in every action. The

wind speed must first be measured

before a signal can be issued to lower

the blinds when a limit value is ex-

ceeded. And the light can only be

turned on when a movement has been

registered – and energy can only be

regulated in an efficient manner when

the temperature has been measured.

KNX sensors

443

ww

w.m

erte

n.de

©2010 | KNX seNsors

CoNTeNTsKNX seNsors


KNX sysTeM DeVICes starting on page 430


KNX seNsors starting on page 442



KNX ACTUATors starting on page 482


Room temperature control unit with

ARTEC Display, System Design

Touch panel 7"

Room temperature control unit for the commercial sector

M-SMART, System M

KNX sensors

ww

w.m

erte

n.co

m

KNX SENSORS

KNX sensors

L

444 KNX SENSORS | Push-buttons System M | ©2010

KNX sensorsKNX sensorsKNX systemKNX sensorsL


Push-buttons System M


Push-button, 1-gang plusFor System M.With integrated bus coupling unit.Push-button with 2 operating buttons, operating and status display and labelling field. The operat-ing display can also be used as an orientation light.The device is connected to the bus line with a bus connecting terminal.

KNX software functions:Switching, toggling, dimming (single/dual-sur-face), blind (single/dual-surface), pulse edges trigger 1-, 2-, 4- or 8-bit telegrams (distinction between short and long operation), pulse edges with 2-byte telegrams (distinction between short and long operation), 8-bit linear regulator, scene retrieval, scene saving, disable functions.

˜ Accessories: Labelling sheets for push-buttons, art. no. 618319/20.

— Contents: With protective hood for plaster.With bus connecting terminal.





Push-button, 2-gang plusFor System M.With integrated bus coupling unit.Push-button with four operating buttons, operat-ing and status display and labelling field. The operating display can also be used as an orienta-tion light.The device is connected to the bus line with a bus connecting terminal.








KNX SENSORS

ww

w.m

erte

n.co

m

KNX sensors

L

©2010 | Push-buttons System M | KNX SENSORS 445

Push-button 2-gang plus with room temperature control unitFor System M.Convenient control unit with 4 operating buttons, operating and status display and labelling field. The operating display can also be used as an ori-entation light.With room temperature control unit and display.With 5 red LEDs.The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. With the white backlit dis-play for showing e.g. the time, date, temperature and operating mode. Menu for setting default operating modes, setpoint value, working/non-working day (external trigger), display mode, time, switching times and brightness of the display.The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single push-buttons. With integrated bus coupler. The bus is con-nected using a bus connecting terminal.. KNX software functions:Functions of the push-buttons:Switching, toggling, dimming, blind control (rela-tive or absolute), pulse edges trigger 1-, 2-, 4- or 8-bit telegrams (distinction between short and long operation), pulse edges with 2-byte tele-grams (distinction between short and long opera-tion), 8-bit linear regulator, scene retrieval, scene saving, disable functions, timed control with syn-chronisation, notification functions, the cyclic reading of external temperature values, fan con-trol, operating modes, move setpoints.Functions of the room temperature control unit:Controller type: 2-step control, continuous PI con-troller, switching PI controller (PWM)Output: continuous in the range 0 to 100% or switching ON/OFFController mode:• Heating with one controller output• Cooling with one controller output• Heating and cooling with separate controller

outputs• Heating and cooling with one controller output• 2-step heating with 2 control outputs• 2-step cooling with 2 control outputs• 2-step heating and cooling with 4 control out-

putsOperating modes: Comfort, comfort extension, standby, night reduction, frost/heat protectionMove all setpoints, save all setpoint tempera-tures and operating modes when reset, external temperature monitoring, additional output of the control value as 1 byte value on the PWM.Monitoring function for the actual temperature, valve protection function. Scene function.Operation: Menu.

— Note: If you already have the labelling software, you can download the form for the multi-function push-button at www.merten.com. Use to label conventional foils (max. thickness 0.1 mm).Contents: With bus connecting terminal and supporting plate.Screw for protection against dismantling.With protective hood for plaster.




Push-button, 4-gang plusFor System M.With integrated bus coupling unit.Push-button with 8 operating buttons, operating and status display and labelling field. The operat-ing display can also be used as an orientation light.The device is connected to the bus line with a bus connecting terminal.







ww

w.m

erte

n.co

m

KNX SENSORS

KNX sensors

L


Push-button, 4-gang plus with IR receiverFor System M.With integrated bus coupling unit.Push-button with 8 operating buttons, operating and status display and labelling field. The operat-ing display can also be used as an orientation light.The functions of each of the keys can be trig-gered using an IR remote control.The push-button is pre-programmed for operation with a Merten IR remote control Distance. Many other IR remote controls (e.g. existing TV or CD player remote controls) can be taught into the push-buttons. The device is connected to the bus line with a bus connecting terminal.


˜ Accessories: Labelling sheets for multi-function push-button with IR receiver, art. no. 618419/20.Transmitter: IR remote control Distance, art. no. 570222. CON-NECT radio universal remote control art. no. 506923.





Push-button 4-gang plus with room temperature control unitFor System M.Convenient control unit with 8 operating buttons, operating and status display and labelling field. The operating display can also be used as an ori-entation light.With room temperature control unit and display.With integrated piezoelectric buzzer to display alarm states and IR receiver. All functions of the respective buttons can be controlled via IR remote control.With 9 red LEDs.The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. With the white backlit dis-play for showing e.g. the time, date, temperature and operating mode. Menu for setting default operating modes, setpoint value, working/non-working day (external trigger), display mode, time, switching times and brightness of the display.The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single push-buttons. With integrated bus coupler. The bus is con-nected using a bus connecting terminal.. KNX software functions:Functions of the push-buttons:Switching, toggling, dimming, blind control (rela-tive or absolute), pulse edges trigger 1-, 2-, 4- or 8-bit telegrams (distinction between short and long operation), pulse edges with 2-byte tele-grams (distinction between short and long opera-tion), 8-bit linear regulator, scene retrieval, scene saving, disable functions, timed control with syn-chronisation, notification functions, the cyclic reading of external temperature values, fan con-trol, operating modes, move setpoints.Functions of the room temperature control unit:Controller type: 2-step control, continuous PI con-troller, switching PI controller (PWM)Output: continuous in the range 0 to 100% or switching ON/OFFController mode:• Heating with one controller output• Cooling with one controller output• Heating and cooling with separate controller



Contents: With bus connecting terminal and supporting plate.Screw for protection against dismantling.With protective hood for plaster.




KNX SENSORS

ww

w.m

erte

n.co

m

KNX sensors

L


Protective hood for plasterFor System M.To protect push-buttons, rockers, room tempera-ture control units and room controllers from con-tamination from painting and decorating work.

˜ Accessories from: Multi-function push-button, 2-gang with room temperature control unit, art. no. 6232.., 6273.. Rockers for push-button modules in System M design, art. no. 6191.., 6192.., 6193.., 6194.., 6195.., 6196.., 6197.., 6251.., 6252.., 6254.., 6255.., 6256.., 6257.., 6258...

— Note: When the protective hood for plaster is in place, the temper-ature measurement of the room temperature control unit is restricted.


627591 10/160 9

Labelling sheets for push-buttonsFor individual labelling of the System M push-but-tons with text or symbols.

˜ To be completed with: System M push-button plus, 1-gang, 2-gang or 4-gang, art. no. 6171.., 6275.., 6172.., 6276.., 6174.., 6278...Accessories: Labelling software, art. no. 615022.

— Contents: 1 sheet for every 28 products.


polar white 618319 1/100 9silver 618320 1/100 9

Labelling sheets for multi-func-tion push-button with IR receiverFor individual labelling of the System M multi-function push-button with IR receiver.

˜ To be completed with: System M push-button, 4-gang plus with IR receiver, art. no. 6175.., 6279...Accessories: Labelling software, art. no. 615022.

— Contents: 1 sheet for every 28 products.


polar white 618419 1/100 9silver 618420 1/100 9



615022 1/20 9.1

KNX push-button module, 1-gangFor System M.Push-button module without rocker. With pro-grammable status display.The device is connected to the bus line with a bus connecting terminal. With integrated bus coupler.

KNX software functions:The push-buttons can be parameterised either as a pair (dual-surface) or individually (single-sur-face).Single-surface: Switch ON or switch OFF, dim-ming, scenes.Dual-surface: Switch ON or switch OFF, dimming, scenes, blinds.

˜ In KNX, to be completed with: Rocker for push-button module, 1-gang, art. no. System M6191.., 6251... Rocker for push-button module, 1-gang, with 1/0 imprint, art. no. System M 6193.., 6254... Rocker for push-button module, 1-gang, with up/down arrow imprint, art. no. System M 6194.., 6255...


625199 1/60 9

Rocker for 1-gang push-button moduleFor System M.The rocker is attached to the 1-gang push-button module.

˜ In KNX, to be completed with: KNX push-button module, 1-gang, art. no. System M 625199.Accessories: Protective hood for plaster, System M, art. no. 627591...





ww

w.m

erte

n.co

m

KNX SENSORS

KNX sensors

L


Rocker for 1-gang push-button module with 1/0 imprintFor System M.The rocker is attached to the 1-gang push-button module.






Rocker for 1-gang push-button module with up/down arrow imprintFor System M.The rocker is attached to the 1-gang push-button module.






KNX push-button module, 2-gangFor System M.Push-button module without rockers. With pro-grammable status display.The device is connected to the bus line with a bus connecting terminal. With integrated bus coupler.


˜ In KNX, to be completed with: Rockers for 2-gang push-button module, art. no. System M 6192.., 6252... Rockers for push-button module, 2-gang, with 1/0 and up/down arrow imprint, art. no. Sys-tem M 6195.., 6256... Rockers for push-button module, 2-gang, with up/down arrow and 1/0 imprint, art. no. System M 6196.., 6257... Rockers for push-button module, 2-gang, with up/down arrow imprint, art. no. System M 6197.., 6258...


625299 1/60 9

Rockers for 2-gang push-button moduleFor System M.The rockers are attached to the 2-gang push-but-ton module.






KNX SENSORS

ww

w.m

erte

n.co

m

KNX sensors

L


Rockers for 2-gang push-button module with 1/0 and up/down arrow imprintFor System M.The rockers are attached to the 2-gang push-but-ton module.






Rockers for 2-gang push-button module with up/down arrow and 1/0 imprintFor System M.The rockers are attached to the 2-gang push-but-ton module.






Rockers for 2-gang push-button module with up/down arrow imprintFor System M.The rockers are attached to the 2-gang push-but-ton module.






ww

w.m

erte

n.co

m

KNX SENSORS

KNX sensors

L

450 KNX SENSORS | System Design push-button | ©2010

System Design push-button


Push-button, 1-gang plusFor System Design.With integrated bus coupling unit.Push-button with two operating buttons, operat-ing display, two blue status displays which can be triggered separately, and a labelling field. The blue operating display can also be used as an ori-entation sign. The lower labelling field can be parameterised as an additional operating key.The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single push-buttons.The device is connected to the bus line with a bus connecting terminal.


˜ Accessories: Labelling sheets for push-button plus art. no. 617819.




˜ metallicstainless steel 628046 1/60 9

Push-button, 2-gang plusFor System Design.With integrated bus coupling unit.Push-button with four operating buttons, operat-ing display, four blue status displays which can be triggered separately, and a labelling field. The blue operating display can also be used as an ori-entation sign. The lower labelling field can be parameterised as an additional operating key.The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single push-buttons.The device is connected to the bus line with a bus connecting terminal.







KNX SENSORS

ww

w.m

erte

n.co

m

KNX sensors

L

©2010 | System Design push-button | KNX SENSORS 451

Push-button 2-gang plus with room temperature control unitFor System Design.Convenient control unit with 4 operating buttons, operating and status display and labelling field. The operating display can also be used as an ori-entation light.With room temperature control unit and display.With 5 blue LEDs.The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. With the white backlit dis-play for showing e.g. the time, date, temperature and operating mode. Menu for setting default operating modes, setpoint value, working/non-working day (external trigger), display mode, time, switching times and brightness of the display.The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single push-buttons. With integrated bus coupler. The bus is con-nected using a bus connecting terminal.. KNX software functions:Functions of the push-buttons:Switching, toggling, dimming, blind control (rela-tive or absolute), pulse edges trigger 1-, 2-, 4- or 8-bit telegrams (distinction between short and long operation), pulse edges with 2-byte tele-grams (distinction between short and long opera-tion), 8-bit linear regulator, scene retrieval, scene saving, disable functions, timed control with syn-chronisation, notification functions, the cyclic reading of external temperature values, fan con-trol, operating modes, move setpoints.Functions of the room temperature control unit:Controller type: 2-step control, continuous PI con-troller, switching PI controller (PWM)Output: continuous in the range 0 to 100% or switching ON/OFFController mode:• Heating with one controller output• Cooling with one controller output• Heating and cooling with separate controller





˜ Thermoplastic brilliantwhite MEG6212-4044 1/50 9 newpolar white MEG6212-4019 1/50 9 newaluminium MEG6212-4060 1/50 9 new

˜ metallicstainless steel MEG6212-4146 1/50 9 new

Push-button, 3-gang plusFor System Design.With integrated bus coupling unit.Push-button with six operating buttons, operating display, six blue status displays which can be trig-gered separately, and a labelling field. The blue operating display can also be used as an orienta-tion sign. The lower labelling field can be parame-terised as an additional operating key.The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single push-buttons.The device is connected to the bus line with a bus connecting terminal.







Push-button, 4-gang plusFor System Design.With integrated bus coupling unit.Push-button with eight operating buttons, operat-ing display, eight blue status displays which can be triggered separately, and a labelling field. The blue operating display can also be used as an ori-entation sign. The lower labelling field can be parameterised as an additional operating key.The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single push-buttons.The device is connected to the bus line with a bus connecting terminal.







ww

w.m

erte

n.co

m

KNX SENSORS

KNX sensors

L


Push-button, 4-gang plus with IR receiverFor System Design.With integrated bus coupling unit.Push-button with eight operating buttons, operat-ing display, eight blue status displays which can be triggered separately, and a labelling field. The blue operating display can also be used as an ori-entation sign. The lower labelling field can be parameterised as an additional operating key.The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single push-buttons.The functions of each of the keys can be trig-gered using an IR remote control.The push-button is pre-programmed for operation with a Merten IR remote control Distance. Many other IR remote controls (e.g. existing TV or CD player remote controls) can be taught to the push-buttons.The device is connected to the bus line with a bus connecting terminal.


˜ Accessories: Labelling sheets for push-button plus art. no. 617819.Transmitter: IR remote control Distance, art. no. 570222. CON-NECT radio universal remote control art. no. 506923.





Push-button 4-gang plus with room temperature control unitFor System Design.Convenient control unit with 8 operating buttons, operating and status display and labelling field. The operating display can also be used as an ori-entation light.With room temperature control unit and display.With integrated piezoelectric buzzer to display alarm states and IR receiver. All functions of the respective buttons can be controlled via IR remote control.With 9 blue LEDs.The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. With the white backlit dis-play for showing e.g. the time, date, temperature and operating mode. Menu for setting default operating modes, setpoint value, working/non-working day (external trigger), display mode, time, switching times and brightness of the display.The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single push-buttons. With integrated bus coupler. The bus is con-nected using a bus connecting terminal.. KNX software functions:Functions of the push-buttons:Switching, toggling, dimming, blind control (rela-tive or absolute), pulse edges trigger 1-, 2-, 4- or 8-bit telegrams (distinction between short and long operation), pulse edges with 2-byte tele-grams (distinction between short and long opera-tion), 8-bit linear regulator, scene retrieval, scene saving, disable functions, timed control with syn-chronisation, notification functions, the cyclic reading of external temperature values, fan con-trol, operating modes, move setpoints.Functions of the room temperature control unit:Controller type: 2-step control, continuous PI con-troller, switching PI controller (PWM)Output: continuous in the range 0 to 100% or switching ON/OFFController mode:• Heating with one controller output• Cooling with one controller output• Heating and cooling with separate controller







KNX SENSORS

ww

w.m

erte

n.co

m

KNX sensors

L

©2010 | System Design push-button | KNX SENSORS 453

Protective hood for plasterFor System DesignTo protect push-buttons, rockers, room tempera-ture control units and room controllers from con-tamination from painting and decorating work.

˜ Accessories from: Push-button in System Design, art. no. 6223.., 6224.., 6225.., 6226... Multi-function push-button in System Design, art. no. 6227.., 6228... Rockers for push-button modules in System Design, art. no. 6261.., 6262.., 6264.., 6265.., 6266.., 6267.., 6268... Room temperature control unit, flush-mounted/PI, in System Design, art. no. 6249...

— Note: When the protective hood for plaster is in place, the temper-ature measurement of the room temperature control unit is restricted.


628091 10/160 9

Labelling sheets for push-button plusFor individual labelling of the System Design push-button plus with text or symbols.The labelling sheet in polar white/silver can be used for polar white, aluminium-coloured and stainless steel push-buttons.

˜ To be completed with: System Design push-button plus, art. no. 6280.., 6281.., 6282.., 6283.., 6284...Accessories: Labelling software, art. no. 615022.

— Contents: 1 sheet for 20 products.


polar white/silver 617819 1/100 9



615022 1/20 9.1

KNX push-button module, 1-gangFor System DesignPush-button module without rocker. With pro-grammable status display.The device is connected to the bus line with a bus connecting terminal. With integrated bus coupler.


˜ In KNX, to be completed with: Rocker for 1-gang push-button module, art. no. System Design 6261... Rocker for push-button module, 1-gang, with 1/0 imprint, art. no. System Design 6264. Rocker for push-button module, 1-gang, with up/down arrow imprint, art. no. System Design 6265...


626199 1/60 9

Rocker for 1-gang push-button moduleFor System Design.The rocker is attached to the 1-gang push-button module.

˜ In KNX, to be completed with: KNX push-button module, 1-gang, art. no. System Design 626199.Accessories: Protective hood for plaster, System Design, art. no. 628091...




626146 1/150 9

Rocker for 1-gang push-button module with 1/0 imprintFor System Design.The rocker is attached to the 1-gang push-button module.





626446 1/150 9

Rocker for 1-gang push-button module with up/down arrow imprintFor System Design.The rocker is attached to the 1-gang push-button module.





626546 1/150 9

ww

w.m

erte

n.co

m

KNX SENSORS

KNX sensors

L


KNX push-button module, 2-gangFor System DesignPush-button module without rockers. With pro-grammable status display.The device is connected to the bus line with a bus connecting terminal. With integrated bus coupler.


˜ In KNX, to be completed with: Rockers for 2-gang push-button module, art. no. System Design 6262... Rockers for push-button module, 2-gang, with 1/0 and up/down arrow imprint, art. no. Sys-tem Design 6266... Rockers for push-button module, 2-gang, with up/down arrow and 1/0 imprint, art. no. System Design 6267... Rockers for push-button module, 2-gang, with up/down arrow imprint, art. no. System Design 6268...


626299 1/60 9

Rockers for 2-gang push-button moduleFor System Design.The rockers are attached to the 2-gang push-but-ton module.





626246 1/150 9

Rockers for 2-gang push-button module with 1/0 and up/down arrow imprintFor System Design.The rockers are attached to the 2-gang push-but-ton module.





626646 1/150 9

Rockers for 2-gang push-button module with up/down arrow and 1/0 imprintFor System Design.The rockers are attached to the 2-gang push-but-ton module.





626746 1/150 9

Rockers for 2-gang push-button module with up/down arrow imprintFor System Design.The rockers are attached to the 2-gang push-but-ton module.





626846 1/150 9

KNX SENSORS

ww

w.m

erte

n.co

m

KNX sensors

L

©2010 | TRANCENT push-button | KNX SENSORS 455

TRANCENT push-button

Control electronics, 1- to 4-gangFor the TRANCENT range.The control electronics can be programmed as a 1-, 2- or 4-gang sensor cover.With orientation LED. Operation of the glass cover is acknowledged with a short tone.With integrated bus coupler. The bus is con-nected using a bus connecting terminal.KNX software functions:The covers facing each other can either be parameterised as a pair (dual-surface) or as indi-vidual buttons (single-surface). There are a total of 12 parameterisation options available.Single-surface: dimming, toggling, pulse edges, temperature, scenes.Dual-surface: blind control, switching, dimming, toggling, pulse edges, temperature, scene.

˜ In KNX, to be completed with: TRANCENT glass sensor cover, art. no. 5691.., 5692.., 5693.., 5695...Accessories: Cover foil for glass sensor cover, art. no. 569190, 569290, 569390.

— Contents: With bus coupler.With bus connecting terminal.


1- to 4-gang MEG6164-4600 1/40 9 new

Bus coupling unit for switch rockers


Bus coupling insert, 1-gangThe rocker for switches and push-button switches, the rocker marked "0"/ "1", the rocker with labelling field and the rocker with opening for symbols from System Basis, System Design and OctoColor can all be fitted on the 1-gang bus coupling insert. With programmable operating or status display for rockers with opening for sym-bols. We can also adapt the switch ranges AQUADESIGN, AQUACLASSIC and ANTI-VANDAL-ISM for the 1-gang bus coupling insert as a spe-cial version.With integrated bus coupler. In the version with middle position, the rockers can be moved up and down (three-way rocker). In the version with-out middle position, telegrams are only gener-ated when the lower half of the rocker is pressed (two-way rocker).For mounting in the size 60 installation box. With push-button and LED for programming.

KNX software functions:For art. no. 671198: Switching. Toggling. Status display.For art. no. 671199: Switching. Dimming. Blinds. Toggling. Status display.


with middle position 671199 1/50 9without middle posi-tion

671198 1/50 9

Bus coupling insert, 2-gangThe rocker for two-circuit switches, the rocker for roller shutter switches and push-buttons from System Basis, System M, System Design and OCTOCOLOR can all be fitted on the 2-gang bus coupling insert. We can also adapt the switch ranges AQUADESIGN and AQUACLASSIC for the 2-gang bus coupling insert as a special version.With integrated bus coupler. In the version with middle position, the rockers can be moved up and down (three-way rocker). In the version with-out middle position, telegrams are only gener-ated when the lower half of the rocker is pressed (two-way rocker).For mounting in the size 60 installation box. With push-button and LED for programming.

KNX software functions:For art. no. 671298: Switching. Toggling. Dim-ming. 1 group of blinds.For art. no. 671299: Switching. Toggling. Dim-ming. 2 groups of blinds.


with middle position 671299 1/50 9without middle posi-tion

671298 1/50 9

ww

w.m

erte

n.co

m

KNX SENSORS

KNX sensors

L

456 KNX SENSORS | Room temperature control unit System M | ©2010

Room temperature control unit System M

Push-button 2-gang plus with room temperature control unitFor System M.Convenient control unit with 4 operating buttons, operating and status display and labelling field. The operating display can also be used as an ori-entation light.With room temperature control unit and display.With 5 red LEDs.The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. With the white backlit dis-play for showing e.g. the time, date, temperature and operating mode. Menu for setting default operating modes, setpoint value, working/non-working day (external trigger), display mode, time, switching times and brightness of the display.The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single push-buttons. With integrated bus coupler. The bus is con-nected using a bus connecting terminal.. KNX software functions:Functions of the push-buttons:Switching, toggling, dimming, blind control (rela-tive or absolute), pulse edges trigger 1-, 2-, 4- or 8-bit telegrams (distinction between short and long operation), pulse edges with 2-byte tele-grams (distinction between short and long opera-tion), 8-bit linear regulator, scene retrieval, scene saving, disable functions, timed control with syn-chronisation, notification functions, the cyclic reading of external temperature values, fan con-trol, operating modes, move setpoints.Functions of the room temperature control unit:Controller type: 2-step control, continuous PI con-troller, switching PI controller (PWM)Output: continuous in the range 0 to 100% or switching ON/OFFController mode:• Heating with one controller output• Cooling with one controller output• Heating and cooling with separate controller



— Contents: With bus connecting terminal and supporting plate.Screw for protection against dismantling.With protective hood for plaster.




Push-button 4-gang plus with room temperature control unitFor System M.Convenient control unit with 8 operating buttons, operating and status display and labelling field. The operating display can also be used as an ori-entation light.With room temperature control unit and display.With integrated piezoelectric buzzer to display alarm states and IR receiver. All functions of the respective buttons can be controlled via IR remote control.With 9 red LEDs.The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. With the white backlit dis-play for showing e.g. the time, date, temperature and operating mode. Menu for setting default operating modes, setpoint value, working/non-working day (external trigger), display mode, time, switching times and brightness of the display.The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single push-buttons. With integrated bus coupler. The bus is con-nected using a bus connecting terminal.. KNX software functions:Functions of the push-buttons:Switching, toggling, dimming, blind control (rela-tive or absolute), pulse edges trigger 1-, 2-, 4- or 8-bit telegrams (distinction between short and long operation), pulse edges with 2-byte tele-grams (distinction between short and long opera-tion), 8-bit linear regulator, scene retrieval, scene saving, disable functions, timed control with syn-chronisation, notification functions, the cyclic reading of external temperature values, fan con-trol, operating modes, move setpoints.Functions of the room temperature control unit:Controller type: 2-step control, continuous PI con-troller, switching PI controller (PWM)Output: continuous in the range 0 to 100% or switching ON/OFFController mode:• Heating with one controller output• Cooling with one controller output• Heating and cooling with separate controller







KNX SENSORS

ww

w.m

erte

n.co

m

KNX sensors

L

©2010 | Room temperature control unit System M | KNX SENSORS 457

Room temperature control unit with displayFor System M.KNX Room temperature control unit with display, labelling field, operation and status LED. The 4 buttons allow to shift set values and change oper-ation modes.With 5 red LEDs.The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. With the white backlit dis-play for showing e.g. the time, date, temperature and operating mode. Menu for setting default operating modes, setpoint value, working/non-working day (external trigger), display mode, time, switching times and brightness of the display.With integrated bus coupler. The bus is con-nected using a bus connecting terminal.KNX software functions:Functions of the room temperature control unit:Controller type: 2-step control, continuous PI con-troller, switching PI controller (PWM)Output: continuous in the range 0 to 100% or switching ON/OFFController mode:• Heating with one controller output• Cooling with one controller output• Heating and cooling with separate controller


putsOperating modes: Comfort, comfort extension, standby, night reduction, frost/heat protectionMove all setpoints, save all setpoint tempera-tures and operating modes when reset, external temperature monitoring, additional output of the control value as 1 byte value on the PWM.Monitoring function for the actual temperature, valve protection function. Functions of the push-buttons:Selection of 1- 4 operating modes each push-but-ton. Move setpoint.

˜ Accessories: Labelling software, art. no. 615022. Protective hood for plaster, System M, art. no. 627591...



˜ Thermoplastic brilliantwhite, glossy MEG6241-0344 1/50 9polar white, glossy MEG6241-0319 1/50 9active white, glossy MEG6241-0325 1/50 9

˜ Thermoplastic classy mattwhite MEG6241-0444 1/50 9polar white MEG6241-0419 1/50 9anthracite MEG6241-0414 1/50 9aluminium MEG6241-0460 1/50 9


Room temperature control unit for propertiesFor System M.KNX room temperature control unit for properties with integrated bus coupler. Depending on the operating mode, the current temperature set-point value and the actual room temperature, a control value for the heating or cooling control unit is transmitted to the KNX. The temperature can optionally be measured by the internal or by an external bus temperature sensor.The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. Operating mode, nominal value, control function settings made only via the bus The device does not have any operating and display elements.With integrated bus coupler. The bus is con-nected using a bus connecting terminal.KNX software functions:Functions of the room temperature control unit:Controller type: 2-step control, continuous PI con-troller, switching PI controller (PWM)Output: continuous in the range 0 to 100% or switching ON/OFFController mode:• Heating with one controller output• Cooling with one controller output• Heating and cooling with separate controller


putsOperating modes: Comfort, comfort extension, standby, night reduction, frost/heat protectionMove all setpoints, save all setpoint tempera-tures and operating modes when reset, external temperature monitoring, additional output of the control value as 1 byte value on the PWM.Monitoring function for the actual temperature, valve protection function. Operation: only via bus telegrams.

— Contents: With bus connecting terminal and supporting plate.With protective hood for plaster.



˜ Thermoplastic classy mattwhite MEG6221-0444 1/50 9polar white MEG6221-0419 1/50 9anthracite MEG6221-0414 1/50 9aluminium MEG6221-0460 1/50 9


ww

w.m

erte

n.co

m

KNX SENSORS

KNX sensors

L

458 KNX SENSORS | Room temperature control unit System M | ©2010

KNX Room temperature control unit, flush-mounted/PI with 4-gang push-button interfaceFor System M.The device is a room temperature control unit and a binary input. Depending on the operating mode, the current temperature setpoint value and the room temperature, a control value for the heating or cooling control unit is transmitted to the KNX. The temperature can either be recorded by the internal or the external temperature sen-sor which must be connected to the push-button interface. The push-button interface generates an internal signal voltage for connecting max. four conven-tional push-buttons or floating contacts. Of these, two inputs can be used to connect low current LEDs.With integrated bus coupler. The bus is con-nected using a bus connecting terminal.KNX software functions:Functions of the room temperature control unit:Controller type: 2-step control, continuous PI con-trol, switching PI control (PWM)Output: continuous in the range 0 to 100% or switching ON/OFFController mode:• Heating with one controller output• Cooling with one controller output• Heating and cooling with separate controller

outputs• Heating and cooling with one controller output• 2-step heating with 2 control outputs• 2-step cooling with 2 control outputsOperating modes: comfort, comfort extension, standby, night economy, frost/heat protectionOperation: Setpoint adjustment can be parame-terised in the range with adjusting wheel; pres-ence push-button functions can be parameterised/switched offValve protection, controller disable Push-button interface functions:Switching, dimming, external blinds, valuator (dimming valuator, extension unit for light scenes with/without memory function, temperature valu-ator, brightness valuator).

Push-button interface: up to 4 inputs, 2 of which can be used as outputs and one for connecting the remote sensor.Output voltage: 5 V (SELV)Output current: max. 0.8 mAMax. cable length: Inputs/outputs max. 5 m, remote sensor max. 50 m

˜ Accessories: Remote sensor for KNX room temperature control unit, UP/PI art. no. 616790.





Remote sensor for room tempera-ture control unit UP/PITemperature sensor the floor/room temperature measurement

Cable length: 4 m (2 x 0.75 mm2)

˜ To be completed with: KNX room temperature control unit, UP/PI with push-button interface, 4-gang, art. no. System M 6167.., 6168... KNX room temperature control unit, UP/PI with push-but-ton interface, 4-gang, art. no. System Design 6169...


black 616790 1/48 9

KNX SENSORS

ww

w.m

erte

n.co

m

KNX sensors

L

©2010 | Room temperature control unit System Design | KNX SENSORS 459

Room temperature control unit System Design

Push-button 2-gang plus with room temperature control unitFor System Design.Convenient control unit with 4 operating buttons, operating and status display and labelling field. The operating display can also be used as an ori-entation light.With room temperature control unit and display.With 5 blue LEDs.The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. With the white backlit dis-play for showing e.g. the time, date, temperature and operating mode. Menu for setting default operating modes, setpoint value, working/non-working day (external trigger), display mode, time, switching times and brightness of the display.The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single push-buttons. With integrated bus coupler. The bus is con-nected using a bus connecting terminal.. KNX software functions:Functions of the push-buttons:Switching, toggling, dimming, blind control (rela-tive or absolute), pulse edges trigger 1-, 2-, 4- or 8-bit telegrams (distinction between short and long operation), pulse edges with 2-byte tele-grams (distinction between short and long opera-tion), 8-bit linear regulator, scene retrieval, scene saving, disable functions, timed control with syn-chronisation, notification functions, the cyclic reading of external temperature values, fan con-trol, operating modes, move setpoints.Functions of the room temperature control unit:Controller type: 2-step control, continuous PI con-troller, switching PI controller (PWM)Output: continuous in the range 0 to 100% or switching ON/OFFController mode:• Heating with one controller output• Cooling with one controller output• Heating and cooling with separate controller







Push-button 4-gang plus with room temperature control unitFor System Design.Convenient control unit with 8 operating buttons, operating and status display and labelling field. The operating display can also be used as an ori-entation light.With room temperature control unit and display.With integrated piezoelectric buzzer to display alarm states and IR receiver. All functions of the respective buttons can be controlled via IR remote control.With 9 blue LEDs.The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. With the white backlit dis-play for showing e.g. the time, date, temperature and operating mode. Menu for setting default operating modes, setpoint value, working/non-working day (external trigger), display mode, time, switching times and brightness of the display.The push-buttons are freely parameterisable as push-button pairs (dual-surface) or as single push-buttons. With integrated bus coupler. The bus is con-nected using a bus connecting terminal.. KNX software functions:Functions of the push-buttons:Switching, toggling, dimming, blind control (rela-tive or absolute), pulse edges trigger 1-, 2-, 4- or 8-bit telegrams (distinction between short and long operation), pulse edges with 2-byte tele-grams (distinction between short and long opera-tion), 8-bit linear regulator, scene retrieval, scene saving, disable functions, timed control with syn-chronisation, notification functions, the cyclic reading of external temperature values, fan con-trol, operating modes, move setpoints.Functions of the room temperature control unit:Controller type: 2-step control, continuous PI con-troller, switching PI controller (PWM)Output: continuous in the range 0 to 100% or switching ON/OFFController mode:• Heating with one controller output• Cooling with one controller output• Heating and cooling with separate controller







ww

w.m

erte

n.co

m

KNX SENSORS

KNX sensors

L

460 KNX SENSORS | Room temperature control unit System Design | ©2010

Room temperature control unit with displayFor System Design.KNX Room temperature control unit with display, labelling field, operation and status LED. The 4 buttons allow to shift set values and change oper-ation modes.With 5 blue LEDs.The room temperature control unit can be used for heating and cooling with infinitely adjustable KNX valve drives or to trigger switch actuators and heating actuators. With the white backlit dis-play for showing e.g. the time, date, temperature and operating mode. Menu for setting default operating modes, setpoint value, working/non-working day (external trigger), display mode, time, switching times and brightness of the display.With integrated bus coupler. The bus is con-nected using a bus connecting terminal.KNX software functions:Functions of the room temperature control unit:Controller type: 2-step control, continuous PI con-troller, switching PI controller (PWM)Output: continuous in the range 0 to 100% or switching ON/OFFController mode:• Heating with one controller output• Cooling with one controller output• Heating and cooling with separate controller


putsOperating modes: Comfort, comfort extension, standby, night reduction, frost/heat protectionMove all setpoints, save all setpoint tempera-tures and operating modes when reset, external temperature monitoring, additional output of the control value as 1 byte value on the PWM.Monitoring function for the actual temperature, valve protection function. Functions of the push-buttons:Selection of 1- 4 operating modes each push-but-ton. Move setpoint.

˜ Accessories: Labelling software, art. no. 615022.— Note: If you already have the labelling software, you can download

the form for the multi-function push-button at www.merten.com. Use to label conventional foils (max. thickness 0.1 mm).Contents: With bus connecting terminal and supporting plate.Screw for protection against dismantling.With protective hood for plaster.


˜ Thermoplastic brilliantwhite MEG6241-4044 1/50 9polar white MEG6241-4019 1/50 9aluminium MEG6241-4060 1/50 9

˜ metallicstainless steel MEG6241-4146 1/50 9

KNX Room temperature control unit, flush-mounted/PI with 4-gang push-button interfaceFor System Design.The device is a room temperature control unit and a binary input. Depending on the operating mode, the current temperature setpoint value and the room temperature, a control value for the heating or cooling control unit is transmitted to the KNX. The temperature can either be recorded by the internal or the external temperature sen-sor which must be connected to the push-button interface. The push-button interface generates an internal signal voltage for connecting max. four conven-tional push-buttons or floating contacts. Of these, two inputs can be used to connect low current LEDs.With integrated bus coupler. The bus is con-nected using a bus connecting terminal.KNX software functions:Functions of the room temperature control unit:Controller type: 2-step control, continuous PI con-trol, switching PI control (PWM)Output: continuous in the range 0 to 100% or switching ON/OFFController mode:• Heating with one controller output• Cooling with one controller output• Heating and cooling with separate controller

outputs• Heating and cooling with one controller output• 2-step heating with 2 control outputs• 2-step cooling with 2 control outputsOperating modes: comfort, comfort extension, standby, night economy, frost/heat protectionOperation: Setpoint adjustment can be parame-terised in the range with adjusting wheel; pres-ence push-button functions can be parameterised/switched offValve protection, controller disable Push-button interface functions:Switching, dimming, external blinds, valuator (dimming valuator, extension unit for light scenes with/without memory function, temperature valu-ator, brightness valuator).

Push-button interface: up to 4 inputs, 2 of which can be used as outputs and one for connecting the remote sensor.Output voltage: 5 V (SELV)Output current: max. 0.8 mAMax. cable length: Inputs/outputs max. 5 m, remote sensor max. 50 m

˜ Accessories: Remote sensor for KNX room temperature control unit, UP/PI art. no. 616790.




616946 1/50 9

KNX SENSORS

ww

w.m

erte

n.co

m

KNX sensors

L

©2010 | Radio transmitters | KNX SENSORS 461

Remote sensor for room tempera-ture control unit UP/PITemperature sensor the floor/room temperature measurement

Cable length: 4 m (2 x 0.75 mm2)

˜ To be completed with: KNX room temperature control unit, UP/PI with push-button interface, 4-gang, art. no. System M 6167.., 6168... KNX room temperature control unit, UP/PI with push-but-ton interface, 4-gang, art. no. System Design 6169...


black 616790 1/48 9

Radio transmitters

The Radio transmitter are not compatible with Merten CON-NECT radio system.








680999 1/50 9

Radio remote control Distance 5010 15 channel radio remote control. For controlling the INSTABUS radio gateway UP or the radio receiver.

Channels: 15Range: up to 100 m (free field)up to 30 m (building)Battery: 2 microcells (IEC LR 03, AAA)Display elements: Function LED

˜ Receiver: INSTABUS radio gateway, flush-mounted, art. no. 680999. Plug adapter with radio receiver, art. no. 591019, 591519. Radio receiver, flush-mounted, 1-gang, art. no. 592591.

– Technical Information— Contents: With battery.


black 590722 1/12 8

Radio push-button 1-gang, bat-tery-poweredFor System M.Battery-powered radio transmitter with two chan-nels. For controlling the INSTABUS radio gateway UP or the radio receiver.High installation flexibility due to flat design. A flush-mounted socket-outlet is not necessary. The push-button is suitable for sticking onto walls or glass, screwing onto walls or flush-mounted outlets as well as installing in a multiple combina-tion.

Channels: 2Range: up to 100 m (free field)up to 30 m (building)Battery: 1 lithium button cell (CR 2450)Display elements: LED for send confirmation


– Technical Information— Contents: Battery, retaining plate, double-sided adhesive strips,

single-sided adhesive strips (aluminium-coloured), screws, dowels.




ww

w.m

erte

n.co

m

KNX SENSORS

KNX sensors

L

462 KNX SENSORS | Radio transmitters | ©2010

Radio push-button 2-gang, bat-tery-poweredFor System M.Battery-powered radio transmitter with four chan-nels. For controlling the INSTABUS radio gateway UP or the radio receiver.High installation flexibility due to flat design. A flush-mounted socket-outlet is not necessary. The push-button is suitable for sticking onto walls or glass, screwing onto walls or flush-mounted outlets as well as installing in a multiple combina-tion.








Radio push-button 1-gang, bat-tery-poweredFor System Design.Battery-powered radio transmitter with two chan-nels. For controlling the INSTABUS radio gateway UP or the radio receiver.High installation flexibility due to flat design. A flush-mounted socket-outlet is not necessary. The push-button is suitable for sticking onto walls or glass, screwing onto walls or flush-mounted outlets as well as installing in a multiple combina-tion.








592146 1/40 8

Radio push-button 2-gang, bat-tery-poweredFor System Design.Battery-powered radio transmitter with four chan-nels. For controlling the INSTABUS radio gateway UP or the radio receiver.High installation flexibility due to flat design. A flush-mounted socket-outlet is not necessary. The push-button is suitable for sticking onto walls or glass, screwing onto walls or flush-mounted outlets as well as installing in a multiple combina-tion.








592246 1/40 8

Universal radio transmitter, flush-mounted, 4-gangBattery-powered radio transmitter for connecting four floating make contacts such as push-buttons or device outputs.Suitable for installation underneath push-button inserts or in empty flush-mounted boxes.Channels: 4Range: up to 100 m (free field)up to 30 m (building)Battery: 1 lithium button cell (CR 2032)Display elements: LED for send confirmation


– Technical Information— Contents: With battery.


592599 1/100 8

KNX SENSORS

ww

w.m

erte

n.co

m

KNX sensors

L

©2010 | Binary inputs | KNX SENSORS 463

Binary inputs


Push-button interface, 2-gang plusGenerates an internal signal voltage for connect-ing two conventional push-buttons or floating contacts, and for connecting two low-current LEDs.The cores are 30 cm long and can be extended to max. 7.5 m. For installation in a conventional 60 mm switch box.

KNX software functions:Switching, dimming or controlling blinds via 1 or 2 inputs, position values for blind control (8-bit), pulse edges with 1-, 2-, 4-, or 8-bit telegrams, dif-ferentiation between short and long activation, initialisation telegram, cyclical transmission, pulse edges with 2-byte telegrams, 8-bit linear regulator, scenes, counter, disable function, break contact/make contact, debounce time. Outputs for connecting control lamps (low-current LEDs) for the status display.

For each input/output object type:Contact voltage: < 3 V (SELV)Contact current: < 0.5 mAOutput current: max. 2 mAMax. cable length: 30 cm unshielded, can be extended up to max. 7.5 m with twisted unshielded cable.Dimensions: approx. 40x30.5x12.5 mm (LxWxH)

˜ Accessories: LED light attachment, two-colour, for switch inserts art. no. 396512.


polar white 670802 1/150 9

Push-button interface, 4-gang plusGenerates an internal signal voltage for connect-ing four conventional push-buttons or floating contacts, and for connecting four low-current LEDs.The cores are 30 cm long and can be extended to max. 7.5 m. For installation in a conventional 60 mm switch box.

KNX software functions:Switching, dimming or controlling blinds via 1 or 2 inputs, position values for blind control (8-bit), pulse edges with 1-, 2-, 4-, or 8-bit telegrams, dif-ferentiation between short and long activation, initialisation telegram, cyclical transmission, pulse edges with 2-byte telegrams, 8-bit linear regulator, scenes, counter, disable function, break contact/make contact, debounce time. Outputs for connecting control lamps (low-current LEDs) for the status display.

For each input/output object type:Contact voltage: < 3 V (SELV)Contact current: < 0.5 mAOutput current: max. 2 mAMax. cable length: 30 cm unshielded, can be extended up to max. 7.5 m with twisted unshielded cable.Dimensions: approx. 40x30.5x12.5 mm (LxWxH)

˜ Accessories: LED light attachment, two-colour, for switch inserts art. no. 396512.


polar white 670804 1/150 9

Binary input, flush-mounted/4x10For connecting four conventional push-buttons or floating contacts to the KNX. Internally generates a signal voltage SELV, electrically isolated from the bus.With integrated bus coupler 2. Insertion in a 40 mm deep installation box.

KNX software functions:Switching, dimming or blind control via 1 or 2 inputs. Positioning values for blind control (8-bit). Pulse edges with 1-, 2- or 8-bit telegrams. Differ-entiation between short/long operation. Initiali-sation telegram. Cyclical sending. Pulse edges with 2-byte telegrams. 8-bit linear regulator. Disa-ble function. Break/make contact. Debounce time.

Inputs: 4Contact voltage: max. 10 V, clockedContact current: max. 2 mA, pulsingCable length: max. 50 m, bus connecting cable or bell wire (Y, J-FY, YR)Dimensions: 48x44x33 mm (HxWxD)



639898 1/50 9

ww

w.m

erte

n.co

m

KNX SENSORS

KNX sensors

L

464 KNX SENSORS | Binary inputs | ©2010

Binary input REG-K/4x10For connecting four conventional push-buttons or floating contacts to the KNX. Internally generates a signal voltage SELV, electrically isolated from the bus.With integrated bus coupler and plug-in screw ter-minals. For installation on DIN rails EN 50022. The bus is connected using a bus connecting ter-minal; a data rail is not necessary.The input voltage level is displayed at each input with a yellow LED. A green LED indicates that the device is ready for operation once the application has been loaded.

KNX software functions:Switching, dimming or blind control via 1 or 2 inputs. Positioning values for blind control (8-bit). Pulse edges with 1-, 2-, 4-, or 8-bit telegrams. Dif-ferentiation between short/long operation. Initial-isation telegram. Cyclical sending. Pulse edges with 2-byte telegrams. 8-bit linear regulator. Disa-ble function. Break/make contact. Debounce time.

Inputs: 4Contact voltage: max. 10 V, clockedContact current: max. 2 mA, pulsingCable length: max. 50 mDevice width: 2.5 modules = approx. 45 mm



light grey 644492 1/30 9.3

Binary input REG-K/8x10For connecting eight conventional push-buttons or floating contacts to the KNX. Internally gener-ates a signal voltage SELV, electrically isolated from the bus.With integrated bus coupler and plug-in screw ter-minals. For installation on DIN rails EN 50022. The bus is connected using a bus connecting ter-minal; a data rail is not necessary.The input voltage level is displayed at each input with a yellow LED. A green LED indicates that the device is ready for operation once the application has been loaded.


Inputs: 8Contact voltage: max. 10 V, clockedContact current: max. 2 mA, pulsingCable length: max. 50 mDevice width: 4 modules = approx. 70 mm



light grey 644592 1/10 9.3

Binary input REG-K/4x24For connecting four conventional devices with AC/DC 24 V outputs to the KNX.With integrated bus coupler and plug-in screw ter-minals. For installation on DIN rails EN 50022. The bus is connected using a bus connecting ter-minal; a data rail is not necessary.The input voltage level is displayed at each input with a yellow LED. A green LED indicates that the device is ready for operation once the application has been loaded.


Input voltage: AC / DC 24 VInputs: 4Input current: DC 15 mA (30 V),AC 6 mA (27 V)0 signal: 5 V1 signal: 11 VCable length: max. 100 mDevice width: 2.5 modules = approx. 45 mm

˜ Accessories: Power supply REG, DC 24 V/0.4 A, art. no. 693003. Power supply REG, DC 24 V/1.25 A, art. no. 693004. Power supply REG, AC 24 V / 1 A, art. no. 663529.



light grey 644892 1/30 9.3

Binary input REG-K/8x24For connecting 8 conventional devices with AC/DC 24 V outputs to KNX.With integrated bus coupler and plug-in screw ter-minals. For installation on DIN rails EN 50022. The bus is connected using a bus connecting ter-minal; a data rail is not necessary.The input voltage level is displayed at each input with a yellow LED. A green LED indicates that the device is ready for operation once the application has been loaded.


Input voltage: AC/DC 24VInputs: 8Input current: DC approx. 15 mA/AC approx. 6 mALine length: max. 100 mDevice width: 4 modules = approx. 72 mm

˜ Accessories: Power supply REG, DC 24 V/0.4 A, art. no. 693003. Power supply REG, DC 24 V/1.25 A, art. no. 693004. Power supply REG, AC 24 V / 1 A, art. no. 663529.



light grey 644792 1/10 9.3

KNX SENSORS

ww

w.m

erte

n.co

m

KNX sensors

L

©2010 | Movement detectors | KNX SENSORS 465

Binary input REG-K/4x230For connecting four conventional devices with AC 230 V outputs to the KNX.With integrated bus coupler and plug-in screw ter-minals. For installation on DIN rails EN 50022. The bus is connected using a bus connecting ter-minal; a data rail is not necessary.The input voltage level is displayed at each input with a yellow LED. A green LED indicates that the device is ready for operation once the application has been loaded.


Input voltage: AC 230 V, 50-60HzInputs: 4Input current: AC 12 mA0 signal: 40 V1 signal: 160 VCable length: max. 100 mDevice width: 2.5 modules = approx. 45 mm



light grey 644992 1/30 9.3

Binary input REG-K/8x230For connecting eight conventional devices with AC 230 V outputs to the KNX.With integrated bus coupler and plug-in screw ter-minals. For installation on DIN rails EN 50022. The bus is connected using a bus connecting ter-minal; a data rail is not necessary.The input voltage level is displayed at each input with a yellow LED. A green LED indicates that the device is ready for operation once the application has been loaded.


Input voltage: AC 230V, 50-60HzInputs: 8Input current: AC approx. 7 mALine length: max. 100 mDevice width: 4 modules = approx. 72 mm



light grey 644692 1/10 9.3

Movement detectors


KNX ARGUS 180, flush-mountedFor System M.Movement detector for indoors.When a movement is detected, a data telegram defined by the programming is transmitted.With integrated bus coupling unit.








ww

w.m

erte

n.co

m

KNX SENSORS

KNX sensors

L

466 KNX SENSORS | Movement detectors | ©2010

KNX ARGUS 180/2.20 m flush-mountedFor System M.Indoor movement detector with anti-crawl protec-tion.When a movement is detected, a data telegram defined by the programming is transmitted.With integrated bus coupling unit. For wall mount-ing in a size 60 mounting box, optimal installation at 2.2 m.

KNX software functions:Five movement blocks: up to four functions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes.Normal operation, master, slave, safety pause, disable function. Sensitivity, brightness and stair-case timer can be set using the ETS or the poten-tiometer. Two movement sensors: the sensitivity and range can be set separately for each sensor. Self-adjusting staircase timer.

Angle of detection: 180°Range: 8 m right/left, 12 m to the front (for a mounting height of 2.20 m)Mounting height: 2.2 m or 1.1 m with half the rangeNumber of levels: 6Number of zones: 46Number of movement sensors: 2, sector-orien-tated, adjustableSensitivity: infinitely adjustable (ETS or potenti-ometer)Light sensor: infinitely adjustable from approx. 10 to 2000 Lux (ETS or potentiometer) Time: adjustable in steps from 1 s to 8 min (potentiometer) or adjustable from 1 s to 255 hours (ETS)EC Directives: Low-voltage guideline 2006/95/EC and EMC guideline 2004/108/EC






KNX ARGUS 180, flush-mountedFor System Design.Movement detector for indoors.When a movement is detected, a data telegram defined by the programming is transmitted.With integrated bus coupling unit.







631846 1/30 9

KNX SENSORS

ww

w.m

erte

n.co

m

KNX sensors

L

©2010 | Presence detector | KNX SENSORS 467

KNX ARGUS 220KNX movement detector for outdoors. 220° sur-face monitoring for large house fronts and sec-tions of the house. With integrated bus coupler. The physical address is programmed with a mag-net.• 360° short-range zone (approx. 4 m radius).• Large wiring compartment and plug system.• Looping is possible.• LED function display for fast alignment at the


easily accessible cover plate.• Flexibly adjustable sensor head.• Possible to blank out individual lens areas.Can be installed on walls and ceilings without additional accessories. Can be mounted on inner/outer corners and stationary pipes using a mounting bracket.KNX software functions:Five movement blocks: up to four functions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes.Normal operation, master, slave, safety pause, disable function. Sensitivity, brightness and stair-case timer can be set using the ETS or the poten-tiometer. Self-adjusting staircase timer.

Angle of detection: 220°Range: max. 16 mNumber of levels: 7Number of zones: 112 with 448 switching seg-mentsLight sensor: infinitely variable from approx. 3 - 1000 lux, lux (infinite: movement detection is independent of the position of the sensor head)Time: can be set externally from 1 s to approx. 8 min. in 6 levels or via ETS from approx. 3 s to approx. 152 hoursSensitivity: infinitely adjustablePossible settings for sensor head:Wall mounting: 9° up, 24° down, 12° left/right, ±12° axialCeiling mounting: 4° up, 29° down, 25° left/right, ±8.5° axialEC directives: Low-voltage guideline 2006/95/EC and EMC directive 2004/108/ECType of protection: IP 55

˜ Accessories: Mounting bracket, art. no. 565291/92/93. Program-ming magnet for valve drive EMO, art. no. 639190.



polar white 632519 1/12 9dark brazil 632515 1/6 9aluminium 632569 1/6 9

Presence detector


KNX ARGUS Presence 180/2.20 m flush-mountedFor System M.Presence detection indoors.If KNX ARGUS Presence detects smaller move-ments in the room, data telegrams are transmit-ted via KNX to control the lighting, blind or heating at the same time. When the lighting is controlled by brightness-dependent movement detection, the device con-stantly monitors the brightness in the room. If sufficient natural light is at hand, the device switches the artificial light off even if a person is present. The overshoot time can be adjusted using the ETS.With integrated bus coupling unit. For wall mount-ing in a size 60 mounting box, optimal installation at 2.2 m. With anti-crawl protection.

KNX software functions:Five movement/presence blocks: up to four func-tions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes.Normal operation, master, slave, monitoring, safety pause, disable function. Two movement sensors: the sensitivity and range can be set sep-arately for each sensor. Self-adjusting staircase timer. Actual brightness value: can be detected via the internal and/or an external light sensor. Actual value correction.

Angle of detection: 180°Range: 8 m right/left, 12 m to the front (for a mounting height of 2.20 m)Mounting height: 2.2 m or 1.1 m at half the rangeTime: adjustable in steps from 1 s to 8 min (potentiometer) or adjustable from 1 s to 255 hours (ETS)Number of levels: 6Number of zones: 46Number of movement sensors: 2, separately adjustableLight sensor: internal light sensor infinitely adjustable from approx. 10 to 2000 Lux (ETS); external light sensor via KNXEC Directives: Low-voltage guideline 2006/95/EC and EMC guideline 2004/108/EC






ww

w.m

erte

n.co

m

KNX SENSORS

KNX sensors

L

468 KNX SENSORS | Presence detector | ©2010

KNX ARGUS Presence BasicPresence detection indoors.If KNX ARGUS Presence detects smaller move-ments in the room, data telegrams are transmit-ted via KNX to control the lighting, blind or heating at the same time. When the lighting is controlled by brightness-dependent movement detection, the device con-stantly monitors the brightness in the room. If sufficient natural light is at hand, the device switches the artificial light off even if a person is present. The overshoot time can be adjusted using the ETS.With integrated bus coupling unit. For ceiling mounting in a size 60 mounting box, optimal installation at 2.5 m. Can also be mounted to ceilings using the surface mounting housing for ARGUS Presence.

KNX software functions:Two movement/presence blocks: up to four func-tions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes.Normal operation (no master/slave), safety pause, disable function. Self-adjusting staircase timer. Actual brightness value: can be specified via the internal and/or an external light sensor.

Angle of detection: 360°Range: a radius of max. 7 m (at a mounting height of 2.50 m)Number of levels: 6Number of zones: 136 with 544 switching seg-mentsNumber of movement sensors: 4Light sensor: internal light sensor infinitely adjustable from approx. 10 to 2000 Lux (ETS); external light sensor via KNXEC Directives: Low-voltage guideline 2006/95/EC and EMC guideline 2004/108/EC





KNX ARGUS PresencePresence detection indoors.If KNX ARGUS Presence detects smaller move-ments in the room, data telegrams are transmit-ted via KNX to control the lighting, blind or heating at the same time. When the lighting is controlled by brightness-dependent movement detection, the device con-stantly monitors the brightness in the room. If sufficient natural light is at hand, the device switches the artificial light off even if a person is present. The overshoot time can be adjusted using the ETS.With integrated bus coupling unit. For ceiling mounting in a size 60 mounting box, optimal installation at 2.5 m. Can also be mounted to ceilings using the surface mounting housing for ARGUS Presence.

KNX software functions:Five movement/presence blocks: up to four func-tions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes.Normal operation, master, slave, monitoring, safety pause, disable function. Four movement sensors: the sensitivity and range can be set sep-arately for each sensor. Self-adjusting staircase timer. Actual brightness value: can be detected via the internal and/or an external light sensor. Actual value correction.

Angle of detection: 360°Range: a radius of max. 7 m (at a mounting height of 2.50 m)Number of levels: 6Number of zones: 136 with 544 switching seg-mentsNumber of movement sensors: 4, separately adjustableLight sensor: internal light sensor infinitely adjustable from approx. 10 to 2000 Lux (ETS); external light sensor via KNXEC Directives: Low-voltage guideline 2006/95/EC and EMC guideline 2004/108/EC





KNX SENSORS

ww

w.m

erte

n.co

m

KNX sensors

L

©2010 | Other sensors | KNX SENSORS 469

KNX ARGUS Presence with light control and IR receiverPresence detection indoors.If KNX ARGUS Presence detects smaller move-ments in the room, data telegrams are transmit-ted via KNX to control the lighting, blind or heating at the same time. When the lighting is controlled by brightness-dependent movement detection, the device con-stantly monitors the brightness in the room. If sufficient natural light is at hand, the device switches the artificial light off even if a person is present. The overshoot time can be adjusted using the ETS.Light control enables the required brightness in a room to be achieved permanently. Dimming and the optional use of a second lighting group main-tains a constant brightness.Individual ARGUS Presence configurations can be changed or other KNX devices can be controlled remotely using the IR receiver.With integrated bus coupling unit. For ceiling mounting in a size 60 mounting box, optimal installation at 2.5 m. Can also be mounted to ceilings using the surface mounting housing for ARGUS Presence.

KNX software functions:Five movement/presence blocks: up to four func-tions can be triggered per block. Telegrams: 1 bit, 1 byte, 2 bytes. An additional light control block: brightness can be maintained constant by dimming and an addi-tional adjustable level.IR receiver function. IR configuration: setting the brightness threshold, staircase timer factors or range.Normal operation, master, slave, monitoring, safety pause, disable function. Four movement sensors: the sensitivity and range can be set sep-arately for each sensor. Self-adjusting staircase timer. Actual brightness value: can be detected via the internal and/or an external light sensor. Actual value correction.

Angle of detection: 360°Range: a radius of max. 7 m (at a mounting height of 2.50 m)Number of levels: 6Number of zones: 136 with 544 switching seg-mentsNumber of movement sensors: 4, separately adjustableLight sensor: internal light sensor infinitely adjustable from approx. 10 to 2000 Lux (ETS); external light sensor via KNXNumber of IR channels: 10 for controlling KNX devices, 10 for configurationEC Directives: Low-voltage guideline 2006/95/EC and EMC guideline 2004/108/EC

˜ Accessories: Surface-mounted housing for ARGUS Presence, art. no. 550619.Transmitter: IR remote control Distance, art. no. 570222. CON-NECT radio universal remote control art. no. 506923.




Surface-mounted housing for ARGUS PresenceThe surface-mounted housing for ARGUS Pres-ence devices also allows them to be surface mounted.

˜ To be completed with: ARGUS Presence, art. no. 550590/91. KNX ARGUS Presence Basic art. no. 6307... KNX ARGUS Presence art. no. 6308... KNX ARGUS Presence with light control and IR receiver art. no. 6309...



polar white 550619 1/21 8.4

Other sensors







black 570222 1/48 8

ww

w.m

erte

n.co

m

KNX SENSORS

KNX sensors

L

470 KNX SENSORS | Other sensors | ©2010















Analogue input REG-K 4-gangThe analogue input records and processes ana-logue sensor signals. Up to four analogue sen-sors can be connected in any combination. In connection with the analogue input module REG/4-gang, 8 analogue inputs are available, to which the connection is made using the sub-bus. For installation on DIN rails EN 50022. The bus is connected using a bus connecting ter-minal; a data rail is not necessary.Evaluation and limit value processing is per-formed in the analogue input. With continuity checking of the 4 ... 20 mA inputs.

Auxiliary voltage: AC 24 V (+/-10 %)Analogue inputs: 4Current interface: 0 ... 20 mA, 4 ... 20 mAVoltage interface: 0 ... 1 V, 0 ... 10 VOutputs: DC 24 V, 100 mAContinuity checking: 4 ... 20 mADevice width: 4 modules = approx. 72 mm

˜ In KNX, to be completed with: Power supply REG, AC 24 V / 1 A, art. no. 663529.Accessories: Analogue input module REG/4-gang, art. no. 682192. Wind sensor with 0-10 V interface, art. no. 663591. Wind sensor with 0-10 V interface and heating, art. no. 663592. Rain sensor, art. no. 663595. Brightness sensor, art. no. 663593: Twilight sensor, art. no. 663594: Temperature sensor, art. no. 663596.



light grey 682191 1/25 9.3

Analogue input module REG/4-gang Extension module to extend weather station REG-K/4-gang and analogue input REG-K/4-gang from 4 to 8 analogue outputs. Connections are made using the sub-bus. Up to four analogue sen-sors can be connected in any combination.For installation on DIN rails EN 50022. Evaluation and limit value processing is per-formed in the analogue input or weather station. With continuity checking of the 4 ... 20 mA inputs.

Auxiliary voltage: AC 24 V (+/-10 %)Rating: max. 4 VAAnalogue inputs: 4Current interface: 0 ... 20 mA, 4 ... 20 mAVoltage interface: 0 ... 1 V, 0 ... 10 V (DC)A/D conversion: 14 bitOutputs: DC 24 V, 100 mAContinuity checking: 4 ... 20 mADevice width: 4 modules = approx. 72 mm

˜ In KNX, to be completed with: Weather station REG-K/4-gang, art. no. 682991. Analogue input REG-K/4-gang, art. no. 682191. Power supply REG, AC 24 V / 1 A, art. no. 663529.Accessories: Wind sensor with 0-10 V interface, art. no. 663591. Wind sensor with 0-10 V interface and heating, art. no. 663592. Rain sensor, art. no. 663595. Brightness sensor, art. no. 663593: Twilight sensor, art. no. 663594: Temperature sensor, art. no. 663596.

— Contents: With sub-bus jumper.


light grey 682192 1/25 9.3

KNX SENSORS

ww

w.m

erte

n.co

m

KNX sensors

L


KNX brightness and temperature sensorThe sensor records brightness and temperature and transmits these values to the bus. It has a temperature sensor and a brightness sensor.• 3 universal channels for single tasks or logic

operations. Temperature and brightness threshold in any combination.

• Sun protection channel for blinds/roller shutter control. Objects for: twilight threshold, bright-ness threshold, drive control, automatic sun function, teaching, security.

• Automatic sun protection. Controls the blinds automatically during the day.

• Teaching object. With this, every brightness threshold can be reset by the touch of a key.

Suitable for mounting on an outside wall.With integrated bus coupler. The bus is connected using a bus connecting terminal.Power consumption: max. 150 mWSensors: 2Temperature measurement range: - 25 °C to + 55 °C (±5 % or ±1 degree)Brightness measurement range: 1 to 100,000 lux (±20% or ±5 lux)Type of protection: IP 54 according to DIN EN 60529 for vertical installation with coverDimensions: 110 x 72 x 54 mm


light grey 663991 1/20 9

KNX Basic weather stationThe KNX Basic weather station records weather data, analyses these and can transmit them to the bus. The device has a wind sensor, precipita-tion sensor, temperature sensor and brightness sensor.• Wind, brightness and temperature are each

sent as a 2-byte value, rain as 1-byte. Wind can be sent either in m/s or km/h.

• 4 universal channels for single tasks or logic operations. Four logic functions per channel are possible.

• 3 sun protection channels for external blinds/roller shutter control. For example, this makes sun protection for up to three facades possible. Objects for: twilight threshold, brightness threshold, drive control, automatic sun func-tion, teaching, security.

• Automatic sun protection. Controls the blinds automatically during the day.

• Teaching object. With this, every brightness threshold can be reset by the touch of a key.

• Integrated heating for rain sensor.Suitable for mounting on an outside wall or with optional accessories on a corner or on a mast.With integrated bus coupler. The bus is con-nected using a bus connecting terminal.An addi-tional AC 230 V power supply is required for the heating unit.Power supply: AC 230 VPower consumption: max. 10 mA with bus volt-agePower consumption: 10 W with heatingSensors: 4Measuring range: - 20 °C to + 55 °CBrightness range: 1 to 100,000 luxAngle of detection: 150°Type of protection: IP 44 per EN 60529Dimensions: 280 x 160 x 135 mm

˜ Accessories: Mast and corner fastening for KNX Basic weather station, art. no. 663992.



Mast and corner fastening for KNX Basic weather station

˜ To be completed with: KNX Basic weather station, art. no. 663990.


663992 1/24 9

ww

w.m

erte

n.co

m

KNX SENSORS

KNX sensors

L

472 KNX SENSORS | Other sensors | ©2010

Weather station REG-K/4-gangThe weather station records and processes ana-logue sensor signals such as wind speed, bright-ness, twilight, precipitation and a DCF-77 signal. Up to four analogue sensors and the DCF-77 weather combi-sensor can be connected in any combination.In connection with the 4-gang analogue input module, 8 analogue inputs are available, to which the connection is made using the sub-bus.For installation on DIN rails EN 50022. The bus is connected using a bus connecting ter-minal; a data rail is not necessary.If DCF-77 weather combi-sensors are used, it is possible to access a pre-configured setting in the software.The measured values are converted by the weather station into 1 byte / 2 byte telegrams (EIS 6/5 value). This enables bus devices (visual-isation software, measured value displays) to access the control processes, generate signals or control weather-dependent processes. Program-ming is performed using the ETS tool for the weather station.Functions:• Two limit values per sensor (not for rain)• Connection of multiple wind sensors• 14 signals can be evaluated• Evaluation of DCF-77 time signal (date and

time)• Astro function• Logic operation controller for application of

limit-value-dependent actions (even external)• Shading of individual façade segments• Signal monitoring of the combi-sensors with

object for the following protective measures• Checking the wind signal for conclusiveness

with object for the following protective meas-ures

• Selective façade shading (for 4 façades) with adjustment of the basic brightness, façade alignment, angle of opening relative to the sun.

• External objects for intervention in basic bright-ness, angle of opening and limit values

• Alarm byte• Continuity monitoring with report on the bus

Auxiliary voltage: AC 24 V (+/-10 %)Analogue inputs: 4Current interface: 0 ... 20 mA, 4 ... 20 mAVoltage interface: 0 ... 1 V, 0 ... 10 VOutputs: DC 24 V, 100 mADevice width: 4 modules = approx. 72 mm

˜ In KNX, to be completed with: Power supply REG, AC 24 V / 1 A, art. no. 663529. ETS tool for weather station, art. no. 615048.Accessories: Analogue input module REG/4-gang, art. no. 682192. Weather combi-sensor/DCF-77, art. no. 663692. Wind sensor with 0-10 V interface, art. no. 663591. Wind sensor with 0-10 V interface and heating, art. no. 663592. Rain sensor, art. no. 663595. Brightness sensor, art. no. 663593: Twilight sensor, art. no. 663594: Temperature sensor, art. no. 663596.



light grey 682991 1/25 9.3

ETS tool for weather stationProgramming software for the ETS for parameter-ising the weather station REG-K/4-gang.

˜ In KNX, to be completed with: Weather station REG-K/4-gang, art. no. 682991.

— Note: The software is available on the Internet or on the Merten info CD.

Weather combi-sensor DCF-77 The weather combi-sensor includes a wind sen-sor, precipitation sensor, twilight sensor and three brightness sensors (East, South, West). With integral DCF77 receiver, antenna rotatable through 45° and integrated heater (protection against thawing and condensation). Suitable for external installation on a wall or a pole. The sen-sor is connected to an REG-K 4-gang weather sta-tion. The weather data is evaluated in the weather sta-tion. The necessary power supplies are provided by the weather station with connected power sup-ply REG.

Power supply: AC 24 V (+/- 15 %)Power consumption: max. 600 mA (with heating)Sensors: 6Wind speed: 1 ... 40 m/s ( 0.5 m/s)Brightness: 0 ... 110 klux (+/- 10 %)Twilight 0 ... 250 luxType of protection: IP 65 when installedTemperature range: - 40 °C ... + 60 °C (non-icing)Fixing method: Mounting bracketDimensions: 130x200 mm (ØxH)

˜ In KNX, to be completed with: Weather station REG-K/4-gang, art. no. 682991.

— Note: If weather-dependent automatic functions are to be carried out, use the blind actuators art. no. 6498...


black 663692 1/1 9

KNX SENSORS

ww

w.m

erte

n.co

m

KNX sensors

L


Wind sensor with 0-10 V interfaceThe wind sensor evaluates the wind speed and converts it into an analogue 0-10 V output volt-age.For external installation and connection to the weather station REG-K/4-gang or the analogue input REG-K/4-gang. These two devices provide the supply voltage necessary to operate the sen-sor.

Measuring range: 0.7 ... 40 m/s, linearOutput: 0 ... 10 VExternal power supply: Voltage: 24 V DC (18-32 V DC)Power consumption: approx. 12 mAGeneral specifications: Type of protection: IP 65Load: max. 60 m/s transientIncoming cable: 3 m, LiYY 6 x 0.25 mm2

Fixing method: Mounting bracketMounting position: vertical

˜ In KNX, to be completed with: Weather station REG-K/4-gang, art. no. 682991. Analogue input REG-K/4-gang, art. no. 682191. Analogue input module REG/4-gang, art. no. 682192.

— Contents: With mounting bracket.



Wind sensor with 0-10 V interface and heatingThe wind sensor evaluates the wind speed and converts it into an analogue 0-10 V output volt-age. The integrated heater can be operated via an external power supply of AC 24 V/500 mA for trouble-free operation in frosty weather.For external installation and connection to the weather station REG-K/4-gang or the analogue input REG-K/4-gang. These two devices provide the supply voltage necessary to operate the sen-sor.

Measuring range: 0.7 ... 40 m/s, linearOutput: 0 ... 10 VExternal power supply: Voltage: 24 V DC (18-32 V DC)Power consumption: approx. 12 mAHeating: 24 V DC/AC PTC element (80° C)General specifications: Type of protection: IP 65Load: max. 60 m/s transientIncoming cable: 3 m, LiYY 6 x 0.25 mm2

Fixing method: Mounting bracketMounting position: vertical

˜ In KNX, to be completed with: Weather station REG-K/4-gang, art. no. 682991. Analogue input REG-K/4-gang, art. no. 682191. Analogue input module REG/4-gang, art. no. 682192.Accessories: Power supply REG, AC 24 V / 1 A, art. no. 663529.




Rain sensorThe rain sensor is used to record and evaluate precipitation and is intended for external mount-ing. A sensor evaluates the conductivity of the rainwater. The heating is controlled by a micro-processor which supplies an output signal of 0 V or 10 V. The end of the rainfall can be recorded almost immediately with the help of an in-built heater. The heater requires an additional voltage of 24 V AC or DC.For external installation and connection to the weather station REG-K/4-gang or the analogue input REG-K/4-gang. These two devices provide the supply voltage necessary to operate the sen-sor.

Output: 0 V dry, 10 V rainExternal power supply: Voltage: 24 V DC (15-30 V DC)Power consumption: approx. 10 mA (without heating)Heating: 24 V DC/AC max. 4.5 WGeneral specifications: Type of protection: IP 65Incoming cable: 3 m, UYY 5 x 0.25 mm2

Fixing method: Mounting bracketMounting position: approx. 45°

˜ In KNX, to be completed with: Weather station REG-K/4-gang, art. no. 682991. Analogue input REG-K/4-gang, art. no. 682191. Analogue input module REG/4-gang, art. no. 682192.Accessories: Power supply REG, AC 24 V / 1 A, art. no. 663529.

— Contents: With holder for installing the sensor on walls and masts.


663595 1/16 9

Brightness sensorThe brightness sensor is required for recording and evaluating brightness. Brightness is recorded via a photoelectric diode and electronically con-verted into an analogue output signal of 0 V - 10 V.For external installation and connection to the weather station REG-K/4-gang or the analogue input REG-K/4-gang. These two devices provide the supply voltage necessary to operate the sen-sor.

Measuring range: 0 to 60,000 lux, linearOutput: 0 ... 10 V short-circuit-proofExternal power supply: Voltage: 24 V DC (15-30 V DC)Power consumption: approx. 5 mAGeneral specifications: Incoming cable: using PG7 screw fittingRecommended cable: 3 x 0.25 mm2

Type of protection: IP 65Dimensions: 58 x 35 x 64 (W x H x D)



light grey 663593 1/80 9

ww

w.m

erte

n.co

m

KNX SENSORS

KNX sensors

L

474 KNX SENSORS | Time switch | ©2010

Twilight sensorThe twilight sensor is required to record and eval-uate brightness. Brightness is recorded via a pho-toelectric diode and electronically converted into an analogue output signal of 0 V - 10 V.For external installation and connection to the weather station REG-K/4-gang or the analogue input REG-K/4-gang. These two devices provide the supply voltage necessary to operate the sen-sor.

Measuring range: 0 to 255 lux, linearOutput: 0 ... 10 V short-circuit-proofExternal power supply: Voltage: 24 V DC (15-30 V DC)Power consumption: approx. 5 mAGeneral specifications: Incoming cable: using PG7 screw fittingRecommended cable: 3 x 0.25 mm2

Type of protection: IP 65Dimensions: 58 x 35 x 64 (W x H xD)



light grey 663594 1/70 9

Temperature sensorThe temperature is measured with the tempera-ture sensor and converted into an analogue out-put signal of 0-10 V.For external installation and connection to the weather station REG-K/4-gang or the analogue input REG-K/4-gang. These two devices provide the supply voltage necessary to operate the sen-sor.

Measuring range: -30° C to +70° C linearOutput: 0 ... 10 V short-circuit-proofExternal power supply: Voltage: 24 V DC (15-30 V DC)Power consumption: approx. 3 mAGeneral specifications: Incoming cable: using PG7 screw fittingRecommended cable: 3 x 0.25 mm2

Type of protection: IP 65Dimensions: 58 x 35 x 64 (W x H x D)



light grey 663596 1/70 9

Time switch


KNX timer REG-KThe timer sends time and date to the bus and can be operated with or without a DCF77 antenna.• Automatic changeover between summer and

winter time (can be switched off)• Own adjustable changeover rule• The data can be sent periodically or on request• Lithium cell: time stays the same in the event

of loss of bus power

Accuracy: 1 s/day, the application allows addi-tional adjustmentReserve power: 10 yearsAntenna line length: max. 100 mType of protection: IP 20EC directives: Low-voltage guideline 2006/95/EC and EMC directive 2004/108/ECDevice width: 2 modules = approx. 36 mm

˜ Accessories: DCF77 antenna, art. no. 668091.


light grey 677290 1/35 9.3

DCF77 antennaAntenna for receiving the time by radio signal. The antenna should be connected to a year time switch REG-K/4/324 DCF-77.


˜ In KNX, to be completed with: Year time switch REG-K/4/324 DCF-77, art. no. 677029. KNX timer REG-K, art. no. 677290.



light grey 668091 1/20 9

KNX SENSORS

ww

w.m

erte

n.co

m

KNX sensors

L

©2010 | Time switch | KNX SENSORS 475

Year time switch REG-K/4/324Quartz-controlled four-channel year time switch. The device can be programmed manually on the device itself or on the PC using the software. With bus coupler. For installation on DIN rails EN 50022.The bus is connected using a bus connecting ter-minal; a data rail is not necessary. After program-ming on the PC, all switching times are exported to a memory chip available as an accessory, and transmitted from this into one or more time switches.Time functions:• 324 non-volatile switching times for selectable

daily, weekly and date commands, impulse commands

• 1x switching operation for holiday/public holi-days

• 10 weekly programs for holidays and public holidays per channel

• Free formation of channel and weekday blocks• Manual switching is possible via preselection

and permanent switches• Random program can be activated• Operation with mains connection possible• High reserve power• Quarz-controlled• Automatic changeover between summer and

winter time

KNX software functions:Switching. Dimming. Send time and date. Scene. Priority.

Operating voltage: Bus, DC 24 VAccuracy: ±1 s/dayReserve power: 1.5 years at full operability. Data backup in disconnected state approx. 40 years (EEPROM)Type of protection: IP 20Device width: 6 modules = approx. 105 mm

˜ Accessories: CTS ChipTool software, art. no. 615034. Memory chip for year time switches, art. no. 668092.


light grey 677129 1/10 9.3

Year time switch REG-K/4/324 DCF-774-channel year time switch with power supply unit and integrated DCF receiver. To be completed with the DCF-77 antenna for radio-controlled time synchronisation. Time and date can be issued on the bus. The device can be programmed manu-ally on the device itself or on the PC using the software. With bus coupler. For installation on DIN rails EN 50022.The bus is connected using a bus connecting ter-minal; a data rail is not necessary. After program-ming on the PC, all switching times are exported to a memory chip available as an accessory, and transmitted from this into one or more time switches.Time functions:• 324 non-volatile switching times for selectable

daily, weekly and date commands, impulse commands

• 1x switching operation for holiday/public holi-days

• 10 weekly programs for holidays and public holidays per channel

• Free formation of channel and weekday blocks• Manual switching is possible via preselection

and permanent switches• Random program can be activated• High reserve power• Automatic changeover between summer and

winter time• Automatic time synchronisation with DCF pos-

sible

KNX software functions:Switching. Dimming. Send time and date. Scene. Priority.

Operating voltage: Bus, DC 24 VAC 230 V ±10%, 50-60 Hz for antennaAccuracy: ±1s/dayReserve power: 1.5 years at full operability. Data backup in disconnected state approx. 40 years (EEPROM)Type of protection: IP 20Device width: 6 modules = approx. 105 mm

˜ In KNX, to be completed with: DCF-77 antenna, art. no. 668091.Accessories: CTS ChipTool software, art. no. 615034. Memory chip for year time switches, art. no. 668092.


light grey 677029 1/10 9.3

Chip tool software CTSSoftware for convenient entry of the switching times for the year time switches REG-K/4/324 on a PC. With adapter for the serial interface to load the program to the memory chip.

System requirements: IBM-compatible, 386 or higher, Windows 95, 98

˜ In KNX, to be completed with: Year time switch REG-K/4/324, art. no. 677129. Year time switch REG-K/4/324 DCF-77, art. no. 677029.Accessories: Memory chip for year time switches, art. no. 668092.

— Contents: With adapter and a memory chip.


615034 1/4 9.1

ww

w.m

erte

n.co

m

KNX SENSORS

KNX sensors

L

476 KNX SENSORS | Devices for display and operation | ©2010

Memory chip for year time switchesEEPROM memory chip for 324 switching times for programming the year time switch REG K/4/324. The program which is created with the software is loaded into the memory chip and can then be imported into one or several year time switches.

˜ In KNX, to be completed with: Year time switch REG-K/4/324, art. no. 677129. Year time switch REG-K/4/324 DCF-77, art. no. 677029. CTS ChipTool software, art. no. 615034.


668092 1/80 9.1

Devices for display and operation


Touch panel 7"The 7" touch panel is used for the visualisation and control of current building states and func-tions. The integrated visualisation software with the self-explanatory user interface offers a high level of operating convenience when operating the touch-sensitive TFT display.Windows CE.NET is installed as the operating sys-tem. Further functions:• Real-time week time switch with internet time

synchronisation• Presence simulation (recording and play-back

of switching habits)• Alarm management• Internet access• Load a slide show• Automatic standby switching• Password protection• Adjustable user interfaceThe 7" touch panel has a LAN (10/100 Mbit/s), KNX and USB interface.. With integrated loud-speaker.Due to its flat design in a flush-mounted housing, its uses range from residential to commercial applications. It can be installed horizontally or vertically.

KNX software functions:Switching, dimming, operation of sunshade sys-tems such as roller shutters, awnings and blinds. Save and retrieve scenes Transmit values. Tele-gram status display. Temperature display. Logic functions. Disable module. Dynamic language selection via KNX object.

Nominal voltage: AC 230 V, 50 HzPower consumption: 2 W in energy-saving mode, 9 W when in operationAmbient operating temperature: -5°C to 45 °CDisplay size: 17.8 cm (7“)Resolution: 800 x 480 pixelsDisplay type: TFTColours shown: 65.000Hardware: 312 MHz Intel XScale PXA270RAM: 64 MBFlash memory: 64 MBType of protection: IP 20Dimensions: 196x137x52 mm (HxWxD)

˜ In KNX, to be completed with: Inner frame set for 7" touch panel, art. no. MEG6270-01... Frame for 7" touch panel, art. no. MEG6270-00.., MEG6270-36.., MEG6270-37...Accessories: Flush mounted box for 7" touch panel, art. no. MEG6270-0001. Cavity wall mounting box for 7" touch panel, art. no. MEG6270-0002.


MEG6260-0007 1/3 9

KNX SENSORS

ww

w.m

erte

n.co

m

KNX sensors

L

©2010 | Devices for display and operation | KNX SENSORS 477

Inner frame set for 7" touch panelThe set consists of the inner frame and the USB cover. The design frames, which are available in various types of material, are attached to the touch panel using the inner frame.

Dimensions: 208x145x7.3 mm (HxWxD)

˜ In KNX, to be completed with: 7" touch panel, art. no. MEG6260-0007. Frame for 7" touch panel, art. no. MEG6270-00.., MEG6270-36.., MEG6270-37...Replacement part: USB cover for 7" touch panel, art. no. MEG6270-02...


˜ Thermoplastic classy mattpolar white MEG6270-0119 1/10 9black MEG6270-0122 1/10 9

Glass frame for 7" touch panelDecorative glass frame for 7" touch panel.

˜ In KNX, to be completed with: 7" touch panel, art. no. MEG6260-0007. Inner frame set for 7" touch panel, art. no. MEG6270-01...


˜ glassBrilliant white MEG6270-3619 1/10 9

Metal frame for 7" touch panelDecorative solid metal frame for 7" touch panel.



˜ metallicSteel MEG6270-3714 1/10 9polished brass MEG6270-3721 1/10 9

Aluminium frame for 7" touch panelDecorative aluminium frame for 7" touch panel.



˜ Aluminiumaluminium MEG6270-3760 1/10 9Polar white MEG6270-3719 1/10 9Black MEG6270-3722 1/10 9

Frame for 7" touch panelDecorative frame for 7" touch panel.




Flush-mounted mounting box for IP touch panel 7"For flush-mounted installation of the touch panel 7".

DimensionsOuter dimensions: 193x138x66 mm (HxWxD)

˜ In KNX, to be completed with: 7" touch panel, art. no. MEG6260-0007.


grey MEG6270-0001 1/4 9

Cavity wall mounting box for touch panel 7"For installing the 7" touch panel into a cavity wall.

DimensionsOuter dimensions: 201x142x56 mm (HxWxD)Opening: 188x133x56 mm (HxWxD)



˜ metallicMEG6270-0002 1/4 9

USB cover for 7" touch panelFor inserting into the intermediate frame. The USB cover is required as a spare part when dam-aged or lost.



ww

w.m

erte

n.co

m

KNX SENSORS

KNX sensors

L


IP touch panel 10"The IP touch panel 10" is used for the visualisa-tion and control of current building statuses and functions. It is operated interactively on the touch-sensitive TFT display.Windows CE is installed as the operating system. With this standard, solutions such as data man-agement, web functions and client/server and network functions can be configured quickly and easily. Via a browser, it is also possible, for exam-ple, to use Merten@home with the IC 1 EIB Inter-net Controller. Using the optional visualisation software, the IP touch panel 10" can be programmed for the visu-alised, interactive control of building functions.The IP touch panel 10" has LAN (10/100 Mbit/s), and a RS 232 and USB connection. The USB con-nection is in the front behind the frame. A plug-in INSTABUS module can be used to connect the IP touch panel 10" to the KNX.Due to its flat design in a flush-mounted housing, its uses range from home applications to pur-pose-built applications.

KNX software functions:Configuration using the "TP VISU configuration tool".

Display size: 10.4“ (24.4 cm)Resolution: 800 x 600 pixels, SVGADisplay type: TFT, resistive touchColours shown: > 65000Supply voltage: DC 24 VPower consumption: < 20 WRAM: 128 MBFlash memory: 64 MBData buffering: via batteryAmbient operating temperature: 5 °C to 40 °CType of protection: IP 20Frame dimensions: 224.7x277.5x12 mm (HxWxD)

˜ To be completed with: Power supply REG, DC 24 V/1 A, art. no. 693004.Accessories: INSTABUS EIB module for IP touch panel art. no. 683093. Design frame for IP touch panel 10" art. no. 489960. Flush-mounted mounting box for IP touch panel 10" art. no. 683091. Cavity wall mounting box for IP touch panel 10" art. no. 683092.

— Note: The TP VISU configuration tool is available on the Internet or on the Merten info CD.Contents: With Design M-Plan frames, aluminium.


˜ Thermoplastic brilliantaluminium glossy 683090 1/1 9

INSTABUS module for IP touch panelPlug-in module for connecting the IP touch panel to the KNX.

˜ In KNX, to be completed with: IP touch panel 10" art. no. 683090.


683093 1/52 9

Real glass frame for IP touch panel 10"For M-PLAN.Decorative frame for the IP touch panel 10".

Dimensions: 228.6x281.4x13.5 mm (HxWxD)



˜ glassDiamond silver 489960 1/5 1.1

Flush-mounted mounting box for IP touch panel 10"For flush-mounted installation of the IP touch panel 10".

Dimensions: 208x238x68 mm (HxWxD)



683091 1/8 9

Cavity wall mounting box for IP touch panel 10"For installing the IP touch panel 10" into a cavity wall.




683092 1/8 9

KNX SENSORS

ww

w.m

erte

n.co

m

KNX sensors

L


LCD mini-panel MT 701 V2.0Current building states can be centrally control-led and functions influenced via the LCD mini-panel.The LCD mini-panel is ideal for private and office use thanks to its compact, flat design (213 mm x 125 mm) and functional scope.An LCD graphic display capable of displaying up to eight rows and 16 different states at the same time is used as the display medium. It is operated interactively via a touch-sensitive keyboard.The user menu is freely programmable, thus per-mitting the creation of function groups specifi-cally adapted to the building and resulting in a clear display of the various applications. Detailed functions can be displayed and operated using the submenus. When planning the LCD mini-panel, the menus and submenus are compiled in line with requirements and assigned to the vari-ous KNX functions. Standard functions can be planned, such as: switching, dimming, blind con-trol and display of measured values. Limit values can also be created. Bus processes can be linked in order to group KNX actions and the result can be displayed.

KNX software functions:Parameterisation using panel programming soft-ware EIB TAB 2 or ETS tool for MT 701 V2.0.

Mains voltage: AC 230 VDimensions: 125x213 mm (HxW)Opening: 121.5x209 mm (HxW)

˜ In KNX, to be completed with: Flush mounting box for mini-panel, art. no. 682591.Accessories: Design frame for mini-panel, art. no. 682592/93.

— Note: The panel programming software EIB TAB 2, art. no. 615901 and ETS tool for MT 701 V2.0, art. no. 615047 are available over the Internet or from the Merten info CD.


MT 701 module 682590 1/6 9

Flush mounting box for mini-panelFor flush-mounted and cavity wall installation of the mini-panels MT 701 V2.0.

˜ In KNX, to be completed with: Mini-panel MT 701, art. no. 682590.


black 682591 1/6 9

Design frame for mini-panelDecorative frame for the mini-panel MT 701 V2.0.




ETS tool for MT 701 V2.0Programming software for the ETS for parameter-ising the LCD mini-panel MT 701 V2.0.



Info display, flush-mountedFor System M.LC display with max. 4 x 16 characters and acoustic signalling device. The info display is used to indicate freely-programmable texts and values and to control functions. Functions and texts can be allocated on up to 12 pages with a maximum of 4 lines. 12 lines of alarm signals can also be allocated. Automatic allocation of alarm signal priority which can be changed manually. Signals that are not shown are selected using two buttons on the display. The functions of two addi-tional buttons are allocated to the display line.With integrated bus coupler. The bus is con-nected using a bus connecting terminal.KNX software functions:Switching, dimming, blind control, temperature control, continuous status control, ASCII text pro-vision, 8-bit scene retrieval, priority control, dis-play of texts, values, date, time, date+time

Display: Illuminated LCD4-line (16 characters) or2-line (8 characters) or1-line (4 characters)Operating elements: 4 buttonsSignalling device: 2 signal tonesAlarm signals: max. 12

— Note: The display tool software V2.0, art. no. 615046, for pro-gramming the flush-mounted info display is available on the Inter-net or on the Merten info CD.Contents: With bus coupler.With bus connecting terminal.





ww

w.m

erte

n.co

m

KNX SENSORS

KNX sensors

L


Info display, flush-mountedFor System Design.LC display with max. 4 x 16 characters and acoustic signalling device. The info display is used to indicate freely-programmable texts and values and to control functions. Functions and texts can be allocated on up to 12 pages with a maximum of 4 lines. 12 lines of alarm signals can also be allocated. Automatic allocation of alarm signal priority which can be changed manually. Signals that are not shown are selected using two buttons on the display. The functions of two addi-tional buttons are allocated to the display line.With integrated bus coupler. The bus is con-nected using a bus connecting terminal.KNX software functions:Switching, dimming, blind control, temperature control, continuous status control, ASCII text pro-vision, 8-bit scene retrieval, priority control, dis-play of texts, values, date, time, date+time






MEG6250-4146 1/40 9 new

KNX SENSORS

ww

w.m

erte

n.co

m

KNX sensors

L


482

ww

w.m

erte

n.de

KNX actuators | ©2010

EFFIcIENt coNtroLKNX actuators














a light.

KNX actuators

carry out the actions that the system

has requested after the sensors have

obtained the necessary data. The

actuators thus carry out the raising or

lowing of the blinds. The light is

switched on or off, depending on the

level of ambient light, and the heating

units are controlled in an energy

efficient manner.KNX actuators

483

ww

w.m

erte

n.de

©2010 | KNX actuators

coNtENtsKNX actuators

REG-K/4x230/250 W universal dimming

actuator


KNX systEm dEvIcEs starting on page 430


KNX sENsors starting on page 442



KNX actuators starting on page 482


KNX swItch actuators wIth maNuaL modE aNd currENt dEtEctIoN: thE soLutIoN For aLL your rEquIrEmENts

KNX swItch actuators wIth maNuaL modE aNd currENt dEtEctIoN

available in these versions:• REG-K/2x230/16• REG-K/4x230/16• REG-K/8x230/16• REG-K/12x230/16all with manual mode and current detec-tion

REG-K/2x230/16 REG-K/4x230/16

REG-K/8x230/16

REG-K/12x230/16

KNX actuators

484

ww

w.m

erte

n.de


Switch actuator REG-K/8x230/6

Switch actuator REG-K/x230/10 with manual mode

Switch actuator REG-K/x230/16 with manual mode

Switch actuator REG-K/12x230/16 with manual mode

and current detection

Article number 646808 649202 649204 649208 649212 647393 647593 647893 648493 647395 647595 647895 648495

Switch contacts 8 2 4 8 12 2 4 8 12 2 4 8 12

Device width 4 TE 2.5 TE 4 TE 4 TE 6 TE 2.5 TE 4 TE 8 TE 12 TE 2.5 TE 4 TE 8 TE 12 TE

Manual mode ■ Mechanical ■ Electrical ■ Reset of manual mode

————

—

———

—

Connecting terminalsplug-in

screw terminalsplug-in screw terminals Screw terminals Screw terminals

Nominal voltage AC 230 V, 50-60 Hz AC 230 V, 50-60 Hz AC 230 V, 50-60 Hz AC 230 V, 50-60 Hz

Nominal current 6 A, cos ϕ = 0.6 10 A, cosϕ = 1 / 10 A, cosϕ = 0.6 16 A, cos ϕ = 0.6 16 A, cos ϕ = 0.6

Max. connected load, AC 230 V ■ Incandescent lamps ■ Halogen lamps ■ Fluorescent lamps

■ Capacitive load

1380 W1380 W1000 VA

105 µF

2000 W1700 W

1800 W, not compensated1000 W with parallel compensation

105 µF

3600 W2500 W2500 VA

200 µF

3600 W2500 W2500 VA

200 µF

Software

ON/OFF delay

Staircase timer function ■ Staircase timer with/without cancel ■ Staircase timer variable ■ Staircase timer adjustable ■ Staircase timer adding ■ Warning

———

———

———

Flashing —

Make/break contact is adjustable

Changeover contact is adjustable — —

Status/status feedback ■ Active ■ Passive ■ Delayed — — —

Behaviour upon bus voltage failure/ bus voltage recovery is adjustable

Scenes ■ Sending delay — — —

Disable function

Priority operation

Central function ■ Time delay (optional) — — —

Logic function ■ Logic operation ■ Value comparison, logic, gate function, filter, time delay

— — —

Safety function — — —

Line supervision(sends live signals)

— — —

current detection ■ AC/DC ■ Energy consumption counter ■ Limit value monitoring ■ Switching counter ■ Operating hours counter ■ Combination counter (switching counter and operating hours counter with limit value monitoring)

———————

———————

———————

Heating function ■ On/Off switching (2 step) ■ Continuous (PWM) ■ Valve protection ■ Behaviour upon bus voltage failure ■ Summer / winter operation ■ Group signal "all valves closed"

———————

———————

———————

KNX actuators | ©2010

KNX actuators

ww

w.m

erte

n.co

m

KNX ACTUATORS

KNX actuators

M

484 KNX ACTUATORS | ©2010

KNX actuatorsKNX actuatorsKNX systemKNX actuatorsM

KNX ACTUATORS

ww

w.m

erte

n.co

m

KNX actuators

M

©2010 | Switch actuators REG-K, 10 A with manual mode | KNX ACTUATORS 485

KNX actuatorsKNX actuatorsKNX systemKNX actuatorsM


Switch actuators REG-K, 10 A with manual mode

Switch actuator REG-K, 10 A with manual modeFor independent switching of up to 12 loads via make contacts. The function of the switching channels is freely configurable. All switching out-lets can be operated manually using push-button operation. With integrated bus coupler. For instal-lation on DIN rails EN 50022.

KNX software functions:Operation as break contact/make contact. Pro-grammable behaviour for download. Delay func-tions for each channel. Staircase lighting function with/without manual OFF function. Cut-out warn-ing for staircase lighting function. Scenes. Central function. Disable function. Logic operation or pri-ority control. Status feedback function for each channel.

Power supply:Nominal voltage: 230 V AC, 50-60 HzExternal auxiliary voltage (optional): 110-240 V AC, 50-60 Hz, max. 2 VAFor each switch output:Nominal current: 10 A, cos = 1; 10 A, cos = 0.6Incandescent lamps: 230 V AC, max. 2000 WHalogen lamps: 230 V AC, max. 1700 WFluorescent lamps:230 V AC, max. 1800 W, uncompensated230 V AC, max. 1000 W parallel-compensatedCapacitive load: 230 V AC, max. 105 µF Device width (649202): 2.5 HP = approx. 45 mmDevice width (649204): 4 HP = approx. 72 mmDevice width (649208): 4 HP = approx. 72 mmDevice width (649212): 6 HP = approx. 108 mm



2 channels 649202 1/10 9.34 channels 649204 1/10 9.38 channels 649208 1/10 9.312 channels 649212 1/10 9.3

Switch actuators REG-K, 16 A with manual mode

Switch actuator REG-K, 16 A with manual modeFor independent switching of up to 12 loads via make contacts. All 230 V switch outputs can be operated with manual switches. With integrated bus coupler.

KNX software functions:Operation as break or make contact, delay func-tions for each channel, staircase lighting function with/without manual OFF function, cut-out warn-ing for staircase lighting function, blocking and additional logic operation or priority control, scenes, status feedback function per channel, central function, comprehensive parameterisa-tion for bus voltage failure and recovery, parame-terisable download behaviour.

Nominal voltage: 230 V AC, 50-60 HzPer switching contact:Nominal current: 16 A, cos = 0.6Incandescent lamps: 230 V AC, max. 3600 W Halogen lamps: 230 V AC, max. 2500 W Fluorescent lamps: AC 230 V, max. 2500 VACapacitive load: 230 V AC, 16 A, max. 200 µFDevice width (647393): 2.5 HP = approx. 45 mmDevice width (647593): 4 HP = approx. 72 mmDevice width (647893): 8 HP = approx. 144 mmDevice width (648493): 12 HP = approx. 216 mm




ww

w.m

erte

n.co

m

KNX ACTUATORS

KNX actuators

M

486 KNX ACTUATORS | Switch actuators REG-K, 16 A with manual mode and current detection | ©2010

Switch actuators REG-K, 16 A with manual mode and current de-tection

Switch actuator REG-K, 16 A with manual mode and current detec-tionFor independent switching of up to 12 loads via make contacts. The actuator has integrated cur-rent detection that measures the load current on each channel. All 230 V switch outputs can be operated with manual switches. With integrated bus coupler.

KNX software functions:Operation as break contact or make contact. Staircase lighting function with/without manual OFF function and switch-off warning. Delay func-tions. Scenes. Logic function. Blocking or priority control. Feedback function. Status. Central func-tion with delay. Parameterisation for bus voltage failure and recovery. Behaviour for download.Current detection function: Behaviour when value exceeds/falls short of the threshold value. Energy, operating and switch on counter with limit value monitoring. Flash function.

Nominal voltage: 230 V AC, 50-60 HzPer switching contact:Nominal current: 16 A, cos = 0.6Incandescent lamps: 230 V AC, max. 3600 W Halogen lamps: 230 V AC, max. 2500 W Fluorescent lamps: 230 V AC, max. 2500 VA, with parallel compensationCapacitive load: 230 V AC, 16 A, max. 200 µFMotor load: 230 V AC, max. 1000 WCurrent detection load current:Detection range: 0.1 A to 16 A (sine effective value or DC)Sensing accuracy: +/- 8% of the current value at hand (sine) and +/- 100 mAFrequency: 50/60 HzDisplay: 100 mADevice width (647395): 2.5 HP = approx. 45 mmDevice width (647595): 4 HP = approx. 72 mmDevice width (647895): 8 HP = approx. 144 mmDevice width (648495): 12 HP = approx. 216 mm




Switch actuators REG-K


Switch actuator REG-K/8x230/6For independent switching of eight loads via make contacts. With integrated bus coupler and plug-in screw terminals. For installation on DIN rails EN 50022.The bus is connected using a bus connecting ter-minal; a data rail is not necessary. A green LED indicates readiness for operation after the appli-cation has been loaded.


Nominal voltage: AC 230 V, 50-60 HzFor each switching contact:Nominal current: 6 A, cos = 0.6Incandescent lamps: AC 230 V, max. 1380 W Halogen lamps: AC 230 V, max. 1380 W Fluorescent lamps: AC 230 V, max. 1000 VACapacitive load: AC 230 V, 6 A, max. 105 µFDevice width: 4 modules = approx. 72 mm



light grey 646808 1/10 9.3

KNX ACTUATORS

ww

w.m

erte

n.co

m

KNX actuators

M

©2010 | Flush-mounted switch actuators | KNX ACTUATORS 487

Flush-mounted switch actuators

Switch actuator, flush-mounted/230/16For switching a load via a make contact. With integrated bus coupler and screw terminals. The device is connected to the bus with a bus con-necting terminal. The actuator can be built into a 47 mm ceiling socket with hook or a flush-mounted switch box.


Nominal voltage: AC 230 V, 50-60 HzNominal current: 16 A, ohmic load10 A, cos = 0.6Nominal outputIncandescent lamps: AC 230 V, max. 2700 WHalogen lamps: AC 230 V, max. 1700 WFluorescent lamps: AC 230 V, max. 1000 VA with parallel compensationCapacitive load: AC 230 V, max. 105 µF



polar white 629993 1/100 9

Blinds/switch actuators REG-K with manual mode


Blind/switch actuator REG-K/8x/16x/10 with manual modeFor independent control of up to 8 blind/roller shutter drives or for switching up to 16 loads via make contacts. The function of the blind or switching channels is freely configurable. All blind/switch outputs can be operated manually using push-buttons. With integrated bus coupling unit. For installation on DIN rails EN 50022.The bus is connected using a bus connecting ter-minal; a data rail is not necessary. Channel sta-tus display via LEDs. A green LED indicates readiness for operation.

KNX software functions:Blind functions: Blind type. Running time. Idle time. Step interval. Weather alarm. 8-bit position-ing for height and slats. Scenes. Status and feed-back function.Switch actuator functions: Operation as break contact/make contact. Programmable behaviour for download. Delay functions for each channel. Staircase lighting function with/without manual OFF function. Cut-out warning for staircase light-ing function. Scenes. Central function. Disable function. Logic operation or priority control. Sta-tus feedback function for each channel.

Power supply:Nominal voltage: AC 230 V, 50 - 60 HzExternal auxiliary voltage (optional): AC 110 - 240 V, 50 - 60 Hz, max. 2 VAFor each blind output:Nominal current: 10 A, cos = 0.6Motor load: AC 230 V, max. 1000 WFor each switch output:Nominal current: 10 A, cos = 1; 10 A, cos = 0.6Incandescent lamps: AC 230 V, max. 2000 WHalogen lamps: AC 230 V, max. 1700 WFluorescent lamps:AC 230 V, max. 1800 W, uncompensatedAC 230 V, max. 1000 W parallel-compensatedCapacitive load: AC 230 V, max. 105 µF Device width: 8 modules = approx. 144 mm

— Note: The blind actuator/switch actuator cannot be used in con-junction with the weather-dependent automatic functions of the weather combi-sensor/DCF77 art. no. 663692. If you require these functions then use the blind actuators art. no. 6498...Contents: With bus connecting terminal and cable cover.


light grey 649908 1/6 9.3

ww

w.m

erte

n.co

m

KNX ACTUATORS

KNX actuators

M

488 KNX ACTUATORS | Blind actuators REG-K with manual mode | ©2010

Blind / switch actuator REG-K/12x/24x/10 with manual modeFor independent control of up to 12 blind/roller shutter drives or for switching up to 24 loads via make contacts. The function of the blind or switching channels is freely configurable. All blind/switch outputs can be operated manually using push-buttons. With integrated bus coupler. For installation on DIN rails EN 50022.The bus is connected using a bus connecting ter-minal; a data rail is not necessary. Channel sta-tus display via LEDs. A green LED indicates readiness for operation.

KNX software functions:Blind functions: Blind type. Running time. Idle time. Step interval. Weather alarm. 8-bit position-ing for height and slats. Scenes. Status and feed-back function.Switch actuator functions: Operation as break contact/make contact. Programmable behaviour for download. Delay functions for each channel. Staircase lighting function with/without manual OFF function. Cut-out warning for staircase light-ing function. Scenes. Central function. Disable function. Logic operation or priority control. Sta-tus feedback function for each channel.

Power supply:Nominal voltage: AC 230 V, 50 - 60 HzExternal auxiliary voltage (optional): AC 110 - 240 V, 50 - 60 Hz, max. 2 VAFor each blind output:Nominal current: 10 A, cos = 0.6Motor load: AC 230 V, max. 1000 WFor each switch output:Nominal current: 10 A, cos = 1; 10 A, cos = 0.6Incandescent lamps: AC 230 V, max. 2000 WHalogen lamps: AC 230 V, max. 1700 WFluorescent lamps:AC 230 V, max. 1800 W, uncompensatedAC 230 V, max. 1000 W parallel-compensatedCapacitive load: AC 230 V, max. 105 µF Device width: 12 modules = approx. 216 mm

— Note: The blind actuator/switch actuator cannot be used in con-junction with the weather-dependent automatic functions of the weather combi-sensor/DCF77 art. no. 663692. If you require these functions then use the blind actuators art. no. 6498...Contents: With bus connecting terminal and cable cover.


light grey 649912 1/6 9.3

Blind actuators REG-K with manual mode

Blind actuator REG-K/2x/10 with manual modeFor independent control of 2 blind/roller shutter drives. The function of the blind channels is freely configurable. All blind outputs can be operated manually using push-button operation. With inte-grated bus coupling unit. For installation onto DIN rails EN 50022.The bus is connected using a bus connecting ter-minal; a data rail is not necessary. Channel sta-tus display via LEDs. A green LED indicates readiness for operation.

KNX software functions:Blind functions: Blind type. Running time. Idle time. Step interval. Differentiated disable func-tions and weather alarms. 8-bit positioning for height and slat. Scenes. Manual/automatic mode. Differentiated status and status feedback functions.

For each blind output:Nominal voltage: AC 230 V, 50-60 HzNominal current: 10 A, cos = 0.6Motor load: AC 230 V, max. 1000 WDevice width: 4 modules = approx. 72 mm



light grey 649802 1/10 9.3

Blind actuator REG-K/4x/10 with manual modeFor independent control of 4 blind/roller shutter drives. The functions of the blind channels is freely configurable. All blind outputs can be oper-ated manually using push-button operation. With integrated bus coupling unit. For installation onto DIN rails EN 50022.The bus is connected using a bus connecting ter-minal; a data rail is not necessary. Channel sta-tus display via LEDs. A green LED indicates readiness for operation.





light grey 649804 1/10 9.3

KNX ACTUATORS

ww

w.m

erte

n.co

m

KNX actuators

M

©2010 | Blind actuators and accessories | KNX ACTUATORS 489

Blind actuator REG-K/8x/10 with manual modeFor independent control of 8 blind/roller shutter drives. The functions of the blind channels is freely configurable. All blind outputs can be oper-ated manually using push-buttons. With inte-grated bus coupler. For installation on DIN rails EN 50022.The bus is connected using a bus connecting ter-minal; a data rail is not necessary. Channel sta-tus display via LEDs. A green LED indicates readiness for operation.


For each blind output:Nominal voltage: AC 230 V, 50 - 60 HzNominal current:10 A, cos = 0.6Motor load: AC 230 V, max. 1000 WExternal auxiliary voltage (optional): AC 110-240 V, 50-60 Hz, max. 2 VADevice width: 8 modules = approx. 144 mm



light grey 649808 1/6 9.3

Blind actuator REG-K/4x24/6 with manual modeFor independent control of 4 blind/roller shutter drives. The function of the blind channels is freely configurable. All blind outputs can be operated manually using push-button operation. With inte-grated bus coupler. For installation onto DIN rails EN 50022.The bus is connected using a bus connecting ter-minal; a data rail is not necessary. Channel sta-tus display via LEDs. A green LED indicates readiness for operation.


For each blind output:Nominal voltage: DC 24 V ±10 %Nominal current: 6 ALoad types: 24 V direct current drivesDevice width: 4 modules = approx. 72 mm



light grey 648704 1/10 9.3

Roller shutter actuator REG-K/4x/10 with manual modeFor independent control of 4 roller shutter drives. The function of the roller shutter channels is freely configurable. All roller shutter outputs can be operated manually using push-button opera-tion. With integrated bus coupler. For installation onto DIN rails EN 50022.Bus connection is via bus terminals, a data rail is not necessary. Channel status display via LEDs. A green LED indicates readiness for operation.

KNX software functions:Roller shutter functions: Running time. Idle time. Differentiated disable functions and weather alarms. 8-bit positioning for height. Scenes. Man-ual/automatic function. Differentiated status and status feedback functions.

For each roller shutter output:Nominal voltage: AC 230 V, 50-60 HzNominal current: 10 A, cos = 0.6Motor load: AC 230 V, max. 1000 WDevice width: 4 modules = approx. 72 mm



light grey 649704 1/10 9.3

Blind actuators and accessories


Blind actuator REG-K/4x/6For independent control of 4 blind/roller shutter drives. With integrated bus coupler and plug-in screw terminals. For installation onto DIN rails EN 50022.The bus is connected using a bus connecting ter-minal; a data rail is not necessary. A green LED indicates readiness for operation after the appli-cation has been loaded.

KNX software functions:Blind functions: Blind type. Running time. Idle time. Step interval. Weather alarms. 8-bit posi-tioning for height and slats. Scenes. Automatic function. Differentiated status and feedback functions.




light grey 646704 1/10 9.3

ww

w.m

erte

n.co

m

KNX ACTUATORS

KNX actuators

M

490 KNX ACTUATORS | Blind actuators and accessories | ©2010





576399 1/24 8







576398 1/100 8

Multiple control relay for roller shutters REG2 A, AC 250 VFor installation on DIN rails. For controlling up to 2 roller shutter motors locally, in groups or centrally. With separation of load and control circuit, as well as forced locking in both directions of movement.Motors are controlled individually using a roller shutter rocker switch and centrally using the blind time switches or blind push-buttons of the Merten blind control system.

Mains voltage: AC 230 V, 50 Hz ±10 %Power consumption: 10 mA in relay operationSwitching voltage: max. AC 250 VSwitching current: max. 2 ATemperature range: 0 -60 °CTerminals: max. 1.5 mm2




576397 1/40 8

KNX ACTUATORS

ww

w.m

erte

n.co

m

KNX actuators

M

©2010 | Dimming actuators | KNX ACTUATORS 491

Dimming actuators


Universal dimming actuator REG-K/4x230/150 WAC 230 V, 50-60 HzFor switching and dimming incandescent lamps, HV halogen lamps and LV halogen lamps using dimmable wound transformers or electronic transformers.(Phase control and phase alignment)With integral bus coupler, screw terminals, short-circuit, open-circuit and excess temperature pro-tection with soft start function. For installation onto DIN rails EN 50022.The dimming actuator automatically recognises the connected load. Combinations of ohmic and inductive, or ohmic and capacitive loads can also be connected. Combinations of inductive and capacitive loads must not be connected.Bus connection is via bus terminals; a data rail is not necessary.

KNX software functions:Dimming operation via KNX, extension units and on the device, different dimming curves and dim-ming speeds, the same dimming time, memory function, ON/OFF delay, staircase time function with/without manual OFF function, scenes (up to eight stored brightness values can be retrieved), central function, logic operation or priority con-trol, blocking function, status feedback.

Nominal voltage: AC 220 - 230 V, 50/60 HzNominal power/channel: max. 150 W/VA25 W minimum load (ohmic)50 VA minimum load (ohmic/inductive/capaci-tive)Input (extension unit operation): AC 230 V, 50/60 Hz (same phase as the dimming channels)Device width: 6 modules = approx. 105 mm




light grey 649315 1/10 9.3

Universal dimming actuator REG-K/4x230/250 WAC 230 V, 50-60 HzFor switching and dimming incandescent lamps, HV halogen lamps and LV halogen lamps using dimmable wound transformers or electronic transformers (Automatic load detection).(Phase control and phase alignment)The connection of different outer conductors is allowed.With integral bus coupler, screw terminals, short-circuit, open-circuit and excess temperature pro-tection with soft start function. For installation onto DIN rails EN 50022.The dimming actuator automatically recognises the connected load. Combinations of ohmic and inductive, or ohmic and capacitive loads can also be connected. Combinations of inductive and capacitive loads must not be connected.Bus connection is via bus terminals; a data rail is not necessary.

KNX software functions:Dimming operation via KNX, Dimming operation on the device, different dimming curves and dim-ming speeds, the same dimming time, memory function, ON/OFF delay, staircase time function with/without manual OFF function, scenes (up to eight stored brightness values can be retrieved), central function, logic operation or priority con-trol, blocking function, status feedback.

Nominal voltage: AC 220 - 230 V, 50/60 HzChannels: 4 (different phases possible)Nominal power: 4 x 250 W/VA3 channels: 1 x 500 W/VA and 2 x 250 W/VA2 channels: 2 x 500 W/VAMinimum load/channel: 25 W (ohmic)50 VA (ohmic-inductive/ohmic-capacitive)Device width: 8 HP = approx. 144 mm



649325 1/6 9.3

ww

w.m

erte

n.co

m

KNX ACTUATORS

KNX actuators

M

492 KNX ACTUATORS | Dimming actuators | ©2010

Universal dimming actuator REG-K/2x230/300 WAC 230 V, 50-60 HzFor switching and dimming incandescent lamps, HV halogen lamps and LV halogen lamps using dimmable wound transformers or electronic transformers.(Phase control and phase alignment)With integral bus coupler, screw terminals, short-circuit, open-circuit and excess temperature pro-tection with soft start function. For installation onto DIN rails EN 50022.The dimming actuator automatically recognises the connected load. Combinations of ohmic and inductive, or ohmic and capacitive loads can also be connected. Combinations of inductive and capacitive loads must not be connected.Bus connection is via bus terminals; a data rail is not necessary.


Nominal voltage: AC 220 - 230 V, 50/60 HzNominal power/channel: max. 300 W/VA25 W minimum load (ohmic)50 W minimum load (ohmic/inductive/capaci-tive)Input (extension unit operation): AC 230 V, 50/60 Hz (same phase as the dimming channels)Device width: 4 modules = approx. 72 mm




light grey 649330 1/10 9.3

Universal dimming actuator REG-K/230/500 WAC 230 V, 50-60 HzFor switching and dimming incandescent lamps, HV halogen lamps and LV halogen lamps using dimmable wound transformers or electronic transformers.(Phase control and phase alignment)With integral bus coupler, screw terminals, short-circuit, open-circuit and excess temperature pro-tection with soft start function. For installation onto DIN rails EN 50022.The dimming actuator automatically recognises the connected load. Combinations of ohmic and inductive, or ohmic and capacitive loads can also be connected. Combinations of inductive and capacitive loads must not be connected.Bus connection is via bus terminals; a data rail is not necessary.






light grey 649350 1/10 9.3

KNX ACTUATORS

ww

w.m

erte

n.co

m

KNX actuators

M

©2010 | Dimming actuators | KNX ACTUATORS 493

Universal dimming actuator REG-K/230/1000 WAC 230 V, 50-60 HzFor switching and dimming incandescent lamps, HV halogen lamps and LV halogen lamps using dimmable wound transformers or electronic transformers.(Phase control and phase alignment)With integral bus coupler, screw terminals, short-circuit, open-circuit and excess temperature pro-tection with soft start function. For installation onto DIN rails EN 50022.The dimming actuator automatically recognises the connected load. Combinations of ohmic and inductive, or ohmic and capacitive loads can also be connected. Combinations of inductive and capacitive loads must not be connected.Bus connection is via bus terminals; a data rail is not necessary.


Nominal voltage: AC 220 - 230 V, 50/60 HzNominal power: max. 1000 W/VA25 W minimum load (ohmic)50 VA minimum load (ohmic/inductive/capaci-tive)Input (extension unit operation): AC 230 V, 50/60 Hz (same phase as the dimming channel)Device width: 4 modules = approx. 72 mm




light grey 649310 1/10 9.3

Dimming actuator REG-K/2x230/300 WAC 230 V, 50 HzFor switching and dimming incandescent lamps and dimmable, wound transformers (ohmic / inductive load).(Phase control)With integral bus coupler, plug-in screw termi-nals, short-circuit and overload protection and soft start function to protect the lamps. For instal-lation onto DIN rails EN 50022.Bus connection is via bus terminals, a data rail is not necessary. Readiness for operation is indi-cated by a green LED after the application has been loaded, and an overload of one channel or both channels is indicated by a flashing light.

KNX software functions:Starting behaviour, memory function, dimming speed, switching off by relative dimming, config-urable minimum brightness and behaviour on bus voltage failure/recovery are programmable.

Nominal voltage: AC 230 V, 50 HzNominal power/channel: max. 300 W/VAMinimum load: 25 W/VAShort-circuit protection: via fuseDevice width: 6 modules = approx. 108 mm



light grey 646630 1/10 9.3

ww

w.m

erte

n.co

m

KNX ACTUATORS

KNX actuators

M

494 KNX ACTUATORS | Control units 0-10 V | ©2010

Control units 0-10 V

Control unit 0-10 V REG-K/1-gang with manual modeFor connecting devices with 0-10 V interface to KNX. With integrated bus coupler and screw ter-minals (230 V) or plug-in screw terminals (0-10 V). The 230 V switch output can be operated with a manual switch. For installation onto DIN rails EN 50022.The bus is connected using a bus connecting ter-minal; a data rail is not necessary.

KNX software functions:Different dimming curves and dimming speeds, the same dimming time, memory function, ON/OFF delay, staircase time function with/without manual OFF function, scenes (up to eight stored brightness values can be retrieved), central func-tion, logic operation or priority control, blocking function, status feedback, behaviour on bus volt-age recovery.

Switch contact: for switching the electronic bal-lasts/transformersNominal voltage: AC 230 V, 50-60 HzNominal current: 16 A, cos = 0,6Switching capacity: AC 230 V, 3600 W, cos = 1Capacitive load: AC 230 V, 16 A, 200 µFIncandescent lamps: AC 230 V, max. 3600 WHalogen lamps: AC 230 V, max. 2500 WFluorescent lamps:AC 230 V, max. 3600 VA, uncompensated AC 230 V, max. 2500 VA, with parallel compen-sationLV- halogen lamps with wound transformer: max. 2000 VA0-10 V interface: 0.12-100 mAVoltage range: DC 0-10 VDevice width: 2.5 HP = approx. 45 mm



light grey 647091 1/10 9.3

Control unit 0-10 V REG-K/3-gang with manual modeFor connecting devices with 0-10 V interface to KNX. With integrated bus coupler and screw ter-minals (230 V) or plug-in screw terminals (0-10 V). Each individual 230 V switch output can be operated manually with a manual switch. For installation onto DIN rails EN 50022.The bus is connected using a bus connecting ter-minal; a data rail is not necessary.

KNX software functions:Different dimming curves and dimming speeds, the same dimming time, memory function, ON/OFF delay, staircase time function with/without manual OFF function, scenes (up to eight stored brightness values can be retrieved), central func-tion, logic operation or priority control, blocking function, status feedback, behaviour on bus volt-age recovery.

Switch contact: for switching the electronic bal-lasts/transformersNominal voltage: AC 230 V, 50-60 HzNominal current: 16 A, cos = 0.6Switching capacity: AC 230 V, 3600 W, cos = 1Capacitive load: AC 230 V, 16 A, 200 µFIncandescent lamps: AC 230 V, max. 3600 WHalogen lamps: AC 230 V, max. 2500 WFluorescent lamps:AC 230 V, max. 3600 VA, uncompensatedAC 230 V, max. 2500 VA, with parallel compensa-tionLV- halogen lamps with wound transformer: max. 2000 VA0-10 V interface: 0.12-100 mAVoltage range: DC 0-10 VDevice width: 4 HP = ca. 72 mm



light grey 646991 1/10 9.3

KNX ACTUATORS

ww

w.m

erte

n.co

m

KNX actuators

M

©2010 | DALI gateways | KNX ACTUATORS 495

DALI gateways

INSTABUS DALI gateway REG-K/1/16/64The DALI gateway connects the KNX with digital electronic ballasts, which are equipped with a DALI interface. The gateway is the DALI master and power supply for the electronic ballasts. It supports the switching and dimming of up to 64 electronic ballasts in 16 groups and the control of 16 lightscenes.Brightness values or error messages of individual groups can be transmitted to the KNX and visual-ised on display units. DALI commissioning and configuration, as well as group assignment and scene setting, can be carried out using:• the device (display and operating buttons).• a software tool (free of charge).The device has 2 inputs for connecting push-but-tons (building site operation), for example.For installation on DIN rails EN 50022. The bus is connected using a bus connecting terminal; a data rail is not necessary. The network and the DALI cable as well as the switch inputs are con-nected via screw terminals on the device.

Supply voltage: AC 110-240 V, 50-60 HzInputs: 2, passive DC 9-36 V or AC 9-24 VOutputs: DALI D+, D in line with DALI specifica-tion DC 16-18 V, 150 mA, short-circuit-proofConnecting cable: 1.5 - 2.5 mm²Type of protection: IP 20Device width: 6 modules = approx. 108 mm



light grey 680129 1/20 9.3

KNX DALI gateway REG-K/1/16(64)/64The DALI gateway connects the KNX with digital electronic ballasts equipped with a DALI inter-face. The gateway is the DALI master and power supply for the electronic ballasts. It supports the switching and dimming of up to 64 electronic bal-lasts in 16 groups and the control of 16 light-scenes. In addition, the 64 electronic ballasts can be individually activated via KNX or compiled via KNX group addresses.Error messages of individual electronic ballasts or each connected lamp can be transmitted to the KNX and visualised on display devices. DALI commissioning and configuration, as well as group assignment and scene setting can be car-ried out using:• the device (display and operating buttons)• a software tool (free of charge)• the integrated Web server. The RH45 connec-

tion is used for connection to a PC (with stand-ard browser).

• a portable Web panel or a PDAThe device has 2 inputs for connecting push-but-tons (building site operation), for example.For installation on DIN rails EN 50022. The bus is connected using a bus connecting terminal; a data rail is not necessary. The network and the DALI cable as well as the switch inputs are con-nected via screw terminals on the device.

Supply voltage: AC 110 - 240 V, 50 - 60 HzInputs: 2, passive DC 9 - 36 V or AC 9 - 24 VOutputs: DALI D+, D- in line with DALI specifica-tion DC 16 - 18 V, 150 mA, short circuit-proofInterfaces: 1xRJ45Connecting cable: 1.5 - 2.5 mm²Type of protection: IP 20Device width: 6 modules = approx. 108 mm



light grey 680191 1/20 9.3

ww

w.m

erte

n.co

m

KNX ACTUATORS

KNX actuators

M

496 KNX ACTUATORS | Room temperature control unit | ©2010

Room temperature control unit


EMO valve drive with 2 binary inputsElectromotive proportional valve drive with inte-grated bus coupler and microprocessor control with automatic valve lift detection. With two inte-grated binary inputs.The valve drive can be connected directly to the KNX. A separate power supply is not required.

KNX software functions:Control value. Actual position. Status. Forced position (window "Open" detection, lower and upper limit for basic temperature control of underfloor heating for example). Binary inputs. Limit value.

Power consumption: typ. 10 mA (= 240 mW; approx. 2 BCU modules)Lift: min. 1.0 mm; max. 4.5 mmRunning time: 25 s/mmType of protection: IP 43 in line with EN 60529 (for vertical installation)Protection class: III in line with EN 60730Connecting cable: 1 m fixed; J(E)YY 3x2x0.6Connection to bus line: via bus connecting termi-nalInstallation: suitable for all Heimeier thermo-static valve bodies and three-way changeover valves

˜ Accessories: Programming magnet for valve drive EMO, art. no. 639190.



EMO valve driveElectromotive proportional valve drive with inte-grated bus coupler and microprocessor control with automatic valve lift detection.The valve drive can be connected directly to the KNX. A separate power supply is not required.

KNX software functions:Setpoint position (control value). Actual position. Status signal. Forced position. Cyclical monitor-ing.

Power consumption: max. 12 mA at 20 V (= 240 mW)Lift: max. 4.5 mmRunning time: 25 s/mmType of protection: IP 43 in line with EN 60529 (for vertical installation)Protection class: III in line with EN 60730Connection cable: 1 m fixed; J-Y (St) Y 1 x 2 x 0.6Connection to bus line: via bus connecting termi-nalInstallation: Fits all Heimeier thermostat valve bases

˜ Accessories: Programming magnet for valve drive EMO, art. no. 639190.



Programming magnet for EMO valve driveNon-contact programming of the physical address of the EMO valve drive or INSTABUS ARGUS 220.

˜ In KNX, to be completed with: Valve drive EMO, art. no. 639119. Valve drive EMO, with 2 binary inputs, art. no. 639118. KNX ARGUS 220, art. no. 6325...


639190 10/180 9.1

Heating actuator REG-K/6x230/0.05 A For actuation of thermoelectric valve drives for heating or cooling ceilings. The heating actuator has 6 electronic outputs. Up to 4 valve drives can be connected to each output. The outputs are either switch activated (1 bit) or PWM signal (1 byte) activated. Each output is overload-protected and short-circuit-protected.For installation on DIN rails EN 50022.The bus is connected using a bus connecting ter-minal; a data rail is not necessary.

KNX software functions:Cycle time, status feedback, summer and winter operation, cyclical monitoring of variables, lock-ing each output in a forced position, behaviour on bus power failure and recovery, overload and short circuit status, mains power loss reporting, collective fault reporting connected to all valves, transmission of the largest 1 byte variable value.

Nominal voltage: AC 230 V, 50-60 HzOutputs: 6, electronicNominal current: 0.05 A, ohmicStarting current: max. 1.5 AMinimum load per used output: 1 valve driveNumber of valve drives max. 4 per outputDevice width: 4 modules = approx. 72 mm

˜ In KNX, to be completed with: PLANTEC multi-function push-but-ton with room temperature control unit, art. no. 626008. Multi-function push-button, 2-gang, with room temperature control unit, art. no. System M 6232.., 6273, System Design 6287... Multi-func-tion push-button, 2-gang, with room temperature control unit, art. no. System M 6274.., 6288, System Design 6236... Room temper-ature control unit, flush-mounted/PI, art. no. 6247.., 6249.., 6246.., 6248... Thermoelectric valve drive 230 V, art. no. 639125.



light grey 645129 1/10 9.3

KNX ACTUATORS

ww

w.m

erte

n.co

m

KNX actuators

M

©2010 | Room temperature control unit | KNX ACTUATORS 497

KNX fan coil actuator REG-KFor heating, ventilation and air conditioning con-trol. For controlling fan convectors with up to three speeds, as well as for controlling three-step motor drives (continuous/pulse-width-modulated) or two-step thermal drives. The actuator supports 2-pipe and 4-pipe systems.Two floating binary inputs for window contact and level contact for condensed water container, for example. Connection of 1-speed to 3-speed fans. The multi-function push-button with room tem-perature control from version 3A can be used to activate the fan coil actuator.With integrated bus coupler. For installation on DIN rails EN 60715. The bus is connected using a bus connecting terminal; a data rail is not neces-sary.KNX software functions:Fan control:In automatic mode, the fan speeds are controlled dependently by the control value of the multi-function push-button. The three fan speeds and automatic mode can be switched via EIB tele-gram. The fan can be controlled either directly or via actuators / suitable dimming actuators. Fan speed feedback is possible via corresponding status feedback objects e.g. status LED of the push-button. The fan speed as well as the auto-matic status "(Auto)" can be displayed on the dis-play of the multi-function push-button with TCU.Valve control:Type of controller: PI controller (PWM and contin-uous).Controller mode: Heating and/or cooling with common or separate valve outputs. Operating modes: The operating mode is selected in the multi-function push-button with TCU

Power supply: AC 230 V ±10 %, 50/60 HzPower consumption: max. 3 VAOutputs: 3 floating contacts (fan coil), 2 semi-conductor switches (valve connections)Switching capacity for valves: 0.5 A, AC 24V - 230 VAdditional relay switching capacity: 16 A Fan relay switching capacity: 8 A Inputs: 2, max. cable length 5 mOperation: Key for fan levels and heating/cooling mode Displays: 9 status LEDsDevice width: 4 modules = approx. 72 mm

˜ Accessories: Multi-function push-button with room temperature control unit, art. no. 6232.., 6273.. , 6236..,6274.., 6287.., 6288.., 626008. Thermoelectric valve drive 24 V art. no. 639126.


light grey 645094 1/10 9.3

Thermoelectric valve drive 230 VThermoelectric valve drive for opening and clos-ing valves. For 2-step or PWM control of heating, air conditioning and ventilation systems, individ-ual room control of surface heaters, control of heating circuit distributors, radiators, convector heaters, cooling ceilings. Operation is carried out by the heating actuator REG-K/ 6x230/0.05 A or a room temperature control unit (230 V) with 2-step or PWM output.Valve adapters permit compatibility with a variety of valve bodies and heating circuit distributors. Functions:• First-open function: The drive is factory-set to

de-energised open. This allows the heating to be operated during the building shell phase.

• De-energised closed• Functional display (open, closed, intermediate

settings)• Adjustment control• Protection against dismantling• Plug-in connecting cable• Plug-in assembly

Supply voltage: AC 230 V, 50/60 HzStarting current: max. 300 mA for max. 200 msOperating current: 8 mAPower consumption: 1.8 WLift: approx. 4 mmRunning time: 45 s/mmPositioning force: 100 NCirculating medium temperature: 0-100°CType of protection: IP 54 / II, in all installation positionsConnecting cable: 1 m, 2x0.75 mm² PVCDimensions: 60x44x61 mm (HxWxD)

˜ To be completed with: Room temperature control insert with switch, art. no. 536302. Valve adapter VA10, art. no. 639110. Valve adapter VA50, art. no 639150. Valve adapter VA78, art. no. 639178. Valve adapter VA80, art. no. 639180.In KNX, to be completed with: Heating actuator REG-K/6x230/0.05 A, art. no. 645129.



ww

w.m

erte

n.co

m

KNX ACTUATORS

KNX actuators

M

498 KNX ACTUATORS | Room temperature control unit | ©2010

Thermoelectric valve drive 24 VThermoelectric valve drive for opening and clos-ing valves. For 2-step or PWM control of heating, air conditioning and ventilation systems, individ-ual room control of surface heaters, control of heating circuit distributors, radiators, convector heaters, cooling ceilings. Fan coil actuator REG-K or a room temperature control unit (24 V) with 2-step or PWM output activates.Valve adapters permit compatibility with a variety of valve bodies and heating circuit distributors. Functions:• First-open function: The drive is factory-set to

de-energised open. This allows the heating to be operated during the building shell phase.

• De-energised closed• Functional display (open, closed, intermediate

settings)• Adjustment control• Protection against dismantling• Plug-in connecting cable• Plug-in assembly

Supply voltage: AC/DC 24 V +20%/-10%, 0-60 HzStarting current: max. 250 mA for max. 2 minOperating current: 75 mAPower consumption: 1.8 WLift: approx. 4 mmRunning time: 45 s/mmPositioning force: 100 NMedium temperature: 0-100°CType of protection/protection class: IP 54 / II, in all installation positionsConnecting cable: 1 m, 2x0.75 mm² PVCDimensions: 60 x 44 x 61 mm (HxWxD)

˜ To be completed with: Room temperature control insert with switch, art. no. 536304. Power supply REG, AC 24 V / 1 A, art. no. 663529. Valve adapter VA10, art. no. 639110. Valve adapter VA50, art. no 639150. Valve adapter VA78, art. no. 639178. Valve adapter VA80, art. no. 639180.In KNX, to be completed with: Fan coil actuator REG-K, art. no. 645094. Power supply REG, AC 24 V / 1 A, art. no. 663529.

— Note: Protective cap AA SK 1000 (aluminium, white RAL 9016) available on request. To install the protective cap, a higher valve adapter must be used (available on request). Check compact radi-ators in advance to see if they are suitable.



Valve adapter VA10 for thermoe-lectric valve driveFor Dumser, Vescal, Simplex.Valve adapters permit compatibility with a variety of valve bodies and heating circuit distributors

˜ To be completed with: Thermoelectric valve drive 230 V, art. no. 639125. Thermoelectric valve drive 24 V, art. no. 639124. Themo-electric valve drive 24 V art.-no. 639126.


639110 5/400 9

Valve adapter VA50 for thermoe-lectric valve driveFor Honeywell+Braukmann, Reich, Landis+Gyr, MNG, Cazzagniga.Valve adapters permit compatibility with a variety of valve bodies and heating circuit distributors



639150 5/400 9

Valve adapter VA78 for thermoe-lectric valve driveFor Danfoss RA.Valve adapters permit compatibility with a variety of valve bodies and heating circuit distributors



639178 5/400 9

Valve adapter VA80 for thermoe-lectric valve driveFor Heimeier, Herb, Onda, Schlösser (from 1993), Oventrop M30x1.5, TeSa.Valve adapters permit compatibility with a variety of valve bodies and heating circuit distributors



639180 5/400 9

KNX ACTUATORS

ww

w.m

erte

n.co

m

KNX actuators

M

©2010 | Complete radio receiver units, switching and dimming | KNX ACTUATORS 499

Complete radio receiver units, switching and dimming

The Radio receiver are not compatible with Merten CONNECT radio system.








680999 1/50 9

Plug adapter with radio receiver, switchAC 230 V, 50 HzFor switching external loads with SCHUKO plug.Can be manually operated and controlled remotely via the INSTABUS radio gateway UP and radio transmitter.

Nominal voltage: AC 230 V, 50 HzNominal current: 16 A, cos = 1Incandescent lamps: AC 230 V, max. 2000 WHalogen lamps: AC 230 V, max. 2000 WCapacitive load: max. 35 µFDimensions: 120x65x38 mm (HxWxD)Display elements: LED for status displayOperating elements: Rotary coding switchType of protection: IP 20

˜ Transmitter: INSTABUS radio gateway, flush-mounted, art. no. 680999. Radio remote control Distance 5010, art. no. 590722. Radio push-button, 1-gang, art. no. System M MEG5091-03../5941.., System Design 5921... Radio push-button, 2-gang, art. no. System M MEG5092-03../5942.., System Design 5922... Univer-sal radio transmitter, flush-mounted, 4-gang, art. no. 592599.




Plug adapter with radio receiver, universal dimmerAC 230 V, 50 HzFor switching and dimming external loads with SCHUKO plug.For ohmic, inductive and capacitive loads, e.g. incandescent lamps, dimmable wound transform-ers and electronic transformers. (Phase control or phase alignment).Can be manually operated and controlled remotely via the INSTABUS radio gateway UP and radio transmitter.The integrated universal dimmer automatically recognises the connected load. Do not connect any mixed loads. With memory function, can be switched off.

Nominal voltage: AC 230 V, 50 HzMinimum load: 40 VAMaximum load: 350 VADimensions: 120x65x38 mm (HxWxD)Display elements: LED for status displayOperating elements: Rotary coding switchType of protection: IP 20





ww

w.m

erte

n.co

m

KNX ACTUATORS

KNX actuators

M

500 KNX ACTUATORS | Other actuators | ©2010

Radio receiver, flush-mounted, 1-gangFor switching loads via a make contact. Can be remote controlled with the INSTABUS radio gate-way UP and radio transmitter.Suitable for installation in a ceiling socket-outlet, in a flush-mounted box or on a ceiling hook.Nominal voltage: AC 230 VNominal current: 10 AConnected loads: Incandescent lamps: 2000 WHalogen lamps: 1200 WFluorescent lamps: 1200 WCapacitive load: 35 µFRadio functions: Switch on, switch off, toggle, push-button operationDisplay elements: LED




592591 1/60 8

Other actuators


Analogue actuator REG-K/4-gang The output channels can be parameterised for different current and voltage signals to control different analogue variables (e.g. servomotors). The actuator has four analogue outputs. For use in connection with the analogue actuator module REG/4-gang, 8 analogue outputs are provided. Connections are made using the sub-bus.For installation on DIN rails EN 50022. The bus is connected using a bus connecting ter-minal; a data rail is not necessary.With continuity checking of the current outputs.

Auxiliary voltage: AC 24 V (+/-10 %)Analogue outputs: 4Current signals: 0 ... 20 mA, 4 ... 20 mAVoltage signals: 0 ... 1 V, 0.. 10 VContinuity checking: 4 ... 20 mAOutputs: DC 24 V, 100 mA (total)Device width: 4 modules = approx. 72 mm

˜ In KNX, to be completed with: Power supply REG, AC 24 V / 1 A, art. no. 663529.Accessories: Analogue actuator module REG/4-gang, art. no. 682292.



light grey 682291 1/25 9.3

Analogue actuator module REG/4-gangExtension module to extend analogue actuator REG-K/4-gang from 4 to 8 analogue outputs. Connections are made using the sub-bus. The output channels can be independently parame-terised for different current and voltage signals to control different control values (e.g. servomo-tors).For installation on DIN rails EN 50022.

Auxiliary voltage: AC 24 V (+/-10 %)Analogue outputs: 4Current signals: 0 ... 20 mA, 4 ... 20 mAVoltage signals: 0 ... 1 V, 0.. 10 V (DC)Continuity checking: 4 ... 20 mAOutputs: DC 24 V, 100 mA (total)Device width: 4 modules = approx. 72 mm

˜ In KNX, to be completed with: Analogue actuator REG-K/4-gang, art. no. 682291.

— Contents: With sub-bus jumper.


light grey 682292 1/25 9.3

KNX ACTUATORS

ww

w.m

erte

n.co

m

KNX actuators

M

©2010 | Devices for display and operation | KNX ACTUATORS 501

Devices for display and operation


Touch panel 7"The 7" touch panel is used for the visualisation and control of current building states and func-tions. The integrated visualisation software with the self-explanatory user interface offers a high level of operating convenience when operating the touch-sensitive TFT display.Windows CE.NET is installed as the operating sys-tem. Further functions:• Real-time week time switch with internet time

synchronisation• Presence simulation (recording and play-back

of switching habits)• Alarm management• Internet access• Load a slide show• Automatic standby switching• Password protection• Adjustable user interfaceThe 7" touch panel has a LAN (10/100 Mbit/s), KNX and USB interface.. With integrated loud-speaker.Due to its flat design in a flush-mounted housing, its uses range from residential to commercial applications. It can be installed horizontally or vertically.

KNX software functions:Switching, dimming, operation of sunshade sys-tems such as roller shutters, awnings and blinds. Save and retrieve scenes Transmit values. Tele-gram status display. Temperature display. Logic functions. Disable module. Dynamic language selection via KNX object.

Nominal voltage: AC 230 V, 50 HzPower consumption: 2 W in energy-saving mode, 9 W when in operationAmbient operating temperature: -5°C to 45 °CDisplay size: 17.8 cm (7“)Resolution: 800 x 480 pixelsDisplay type: TFTColours shown: 65.000Hardware: 312 MHz Intel XScale PXA270RAM: 64 MBFlash memory: 64 MBType of protection: IP 20Dimensions: 196x137x52 mm (HxWxD)

˜ In KNX, to be completed with: Inner frame set for 7" touch panel, art. no. MEG6270-01... Frame for 7" touch panel, art. no. MEG6270-00.., MEG6270-36.., MEG6270-37...Accessories: Flush mounted box for 7" touch panel, art. no. MEG6270-0001. Cavity wall mounting box for 7" touch panel, art. no. MEG6270-0002.


MEG6260-0007 1/3 9

Inner frame set for 7" touch panelThe set consists of the inner frame and the USB cover. The design frames, which are available in various types of material, are attached to the touch panel using the inner frame.

Dimensions: 208x145x7.3 mm (HxWxD)

˜ In KNX, to be completed with: 7" touch panel, art. no. MEG6260-0007. Frame for 7" touch panel, art. no. MEG6270-00.., MEG6270-36.., MEG6270-37...Replacement part: USB cover for 7" touch panel, art. no. MEG6270-02...



Glass frame for 7" touch panelDecorative glass frame for 7" touch panel.



˜ glassBrilliant white MEG6270-3619 1/10 9

Metal frame for 7" touch panelDecorative solid metal frame for 7" touch panel.



˜ metallicSteel MEG6270-3714 1/10 9polished brass MEG6270-3721 1/10 9

Aluminium frame for 7" touch panelDecorative aluminium frame for 7" touch panel.



˜ Aluminiumaluminium MEG6270-3760 1/10 9Polar white MEG6270-3719 1/10 9Black MEG6270-3722 1/10 9

ww

w.m

erte

n.co

m

KNX ACTUATORS

KNX actuators

M

502 KNX ACTUATORS | Devices for display and operation | ©2010

Frame for 7" touch panelDecorative frame for 7" touch panel.




Flush-mounted mounting box for IP touch panel 7"For flush-mounted installation of the touch panel 7".

DimensionsOuter dimensions: 193x138x66 mm (HxWxD)



grey MEG6270-0001 1/4 9

Cavity wall mounting box for touch panel 7"For installing the 7" touch panel into a cavity wall.

DimensionsOuter dimensions: 201x142x56 mm (HxWxD)Opening: 188x133x56 mm (HxWxD)



˜ metallicMEG6270-0002 1/4 9

USB cover for 7" touch panelFor inserting into the intermediate frame. The USB cover is required as a spare part when dam-aged or lost.



IP touch panel 10"The IP touch panel 10" is used for the visualisa-tion and control of current building statuses and functions. It is operated interactively on the touch-sensitive TFT display.Windows CE is installed as the operating system. With this standard, solutions such as data man-agement, web functions and client/server and network functions can be configured quickly and easily. Via a browser, it is also possible, for exam-ple, to use Merten@home with the IC 1 EIB Inter-net Controller. Using the optional visualisation software, the IP touch panel 10" can be programmed for the visu-alised, interactive control of building functions.The IP touch panel 10" has LAN (10/100 Mbit/s), and a RS 232 and USB connection. The USB con-nection is in the front behind the frame. A plug-in INSTABUS module can be used to connect the IP touch panel 10" to the KNX.Due to its flat design in a flush-mounted housing, its uses range from home applications to pur-pose-built applications.

KNX software functions:Configuration using the "TP VISU configuration tool".

Display size: 10.4“ (24.4 cm)Resolution: 800 x 600 pixels, SVGADisplay type: TFT, resistive touchColours shown: > 65000Supply voltage: DC 24 VPower consumption: < 20 WRAM: 128 MBFlash memory: 64 MBData buffering: via batteryAmbient operating temperature: 5 °C to 40 °CType of protection: IP 20Frame dimensions: 224.7x277.5x12 mm (HxWxD)

˜ To be completed with: Power supply REG, DC 24 V/1 A, art. no. 693004.Accessories: INSTABUS EIB module for IP touch panel art. no. 683093. Design frame for IP touch panel 10" art. no. 489960. Flush-mounted mounting box for IP touch panel 10" art. no. 683091. Cavity wall mounting box for IP touch panel 10" art. no. 683092.

— Note: The TP VISU configuration tool is available on the Internet or on the Merten info CD.Contents: With Design M-Plan frames, aluminium.


˜ Thermoplastic brilliantaluminium glossy 683090 1/1 9

INSTABUS module for IP touch panelPlug-in module for connecting the IP touch panel to the KNX.



683093 1/52 9

KNX ACTUATORS

ww

w.m

erte

n.co

m

KNX actuators

M


Real glass frame for IP touch panel 10"For M-PLAN.Decorative frame for the IP touch panel 10".

Dimensions: 228.6x281.4x13.5 mm (HxWxD)



˜ glassDiamond silver 489960 1/5 1.1

Flush-mounted mounting box for IP touch panel 10"For flush-mounted installation of the IP touch panel 10".




683091 1/8 9

Cavity wall mounting box for IP touch panel 10"For installing the IP touch panel 10" into a cavity wall.




683092 1/8 9

LCD mini-panel MT 701 V2.0Current building states can be centrally control-led and functions influenced via the LCD mini-panel.The LCD mini-panel is ideal for private and office use thanks to its compact, flat design (213 mm x 125 mm) and functional scope.An LCD graphic display capable of displaying up to eight rows and 16 different states at the same time is used as the display medium. It is operated interactively via a touch-sensitive keyboard.The user menu is freely programmable, thus per-mitting the creation of function groups specifi-cally adapted to the building and resulting in a clear display of the various applications. Detailed functions can be displayed and operated using the submenus. When planning the LCD mini-panel, the menus and submenus are compiled in line with requirements and assigned to the vari-ous KNX functions. Standard functions can be planned, such as: switching, dimming, blind con-trol and display of measured values. Limit values can also be created. Bus processes can be linked in order to group KNX actions and the result can be displayed.

KNX software functions:Parameterisation using panel programming soft-ware EIB TAB 2 or ETS tool for MT 701 V2.0.

Mains voltage: AC 230 VDimensions: 125x213 mm (HxW)Opening: 121.5x209 mm (HxW)

˜ In KNX, to be completed with: Flush mounting box for mini-panel, art. no. 682591.Accessories: Design frame for mini-panel, art. no. 682592/93.

— Note: The panel programming software EIB TAB 2, art. no. 615901 and ETS tool for MT 701 V2.0, art. no. 615047 are available over the Internet or from the Merten info CD.


MT 701 module 682590 1/6 9

Flush mounting box for mini-panelFor flush-mounted and cavity wall installation of the mini-panels MT 701 V2.0.



black 682591 1/6 9

Design frame for mini-panelDecorative frame for the mini-panel MT 701 V2.0.




ww

w.m

erte

n.co

m

KNX ACTUATORS

KNX actuators

M

504 KNX ACTUATORS | Devices for display and operation | ©2010

ETS tool for MT 701 V2.0Programming software for the ETS for parameter-ising the LCD mini-panel MT 701 V2.0.



Info display, flush-mountedFor System M.LC display with max. 4 x 16 characters and acoustic signalling device. The info display is used to indicate freely-programmable texts and values and to control functions. Functions and texts can be allocated on up to 12 pages with a maximum of 4 lines. 12 lines of alarm signals can also be allocated. Automatic allocation of alarm signal priority which can be changed manually. Signals that are not shown are selected using two buttons on the display. The functions of two addi-tional buttons are allocated to the display line.With integrated bus coupler. The bus is con-nected using a bus connecting terminal.KNX software functions:Switching, dimming, blind control, temperature control, continuous status control, ASCII text pro-vision, 8-bit scene retrieval, priority control, dis-play of texts, values, date, time, date+time







Info display, flush-mountedFor System Design.LC display with max. 4 x 16 characters and acoustic signalling device. The info display is used to indicate freely-programmable texts and values and to control functions. Functions and texts can be allocated on up to 12 pages with a maximum of 4 lines. 12 lines of alarm signals can also be allocated. Automatic allocation of alarm signal priority which can be changed manually. Signals that are not shown are selected using two buttons on the display. The functions of two addi-tional buttons are allocated to the display line.With integrated bus coupler. The bus is con-nected using a bus connecting terminal.KNX software functions:Switching, dimming, blind control, temperature control, continuous status control, ASCII text pro-vision, 8-bit scene retrieval, priority control, dis-play of texts, values, date, time, date+time






MEG6250-4146 1/40 9 new

KNX ACTUATORS

ww

w.m

erte

n.co

m

KNX actuators

M


506

ww

w.m

erte

n.de

ConneCtion teChnology | Cooker and appliance connection boxes | Plugs and connectors | ©2010

SiMPle AnD SoliD ConneCtionS APPliAnCe ConneCtion boxeS| PlugS AnD ConneCtorS

Appliance connection boxes

Whether surface- or flush-mounted

with simple or multiple connection

boxes: Merten provides a broad range

of cooker and appliance connection

boxes, which ensure maximum safety

in the installation of electrical devices.

Merten's connection boxes are made

of shatter-proof material to provide an

additional measure of safety.

SCHUKO rubber®rubber plugs and

connectors

The perfect connection: SCHUKO

rubber ®plugs by Merten are extremely

robust and can withstand extreme

external stress. For this reason, they

are especially suited for daily use in

the workshop and on construction

sites. The modular system structure

makes it easy to replace the snap

collars, screwed joints, and hinged lids

on all plugs and connectors. The

rubber SCHUKO® plugs and connectors

bear the hammer symbol as well as

many other recognised quality marks,

and provide reliable safety for the

electrician.

Connection technology

507

ww

w.m

erte

n.de

©2010 | Plugs and connectors | Cooker and appliance connection boxes | ConneCtion teChnology

ContentSAPPliAnCe ConneCtion boxeS | PlugS AnD ConneCtorS

Cooker connection box FM+SM

Universal flush or surface-mounting

Rubber SCHUKO® plugs and connectors


ww

w.m

erte

n.co

m

COOKER AND APPLIANCE CONNECTION BOXES


S

508 COOKER AND APPLIANCE CONNECTION BOXES | Cooker and appliance connection boxes | ©2010

Connection technologyCooker and appliance connection boxesConnection technologyCooker and appliance connection boxesCooker and appliance connection boxesS

– Technical Information: Cooker sockets

Cooker and appliance connection boxes

Cooker connection box, flush-mountedNominal cross-section 2.5 mm²Particularly flat design. With shatter-proof lid and snap lock, removable terminal block with 5 dou-ble terminals.

– Technical Information— Note: If using extension claws art. no. 533591, also fits size 70

flush-mounted boxes.


polar white 520427 5/60 6.1

Cooker connection box, flush- and surface-mountedNominal cross-section 2.5 mm²With shatter-proof lid and snap lock. Screw and claw fixing for size 60 and 70 flush-mounted boxes with removable claws.Large, clear wiring compartment.Dowel fixing and cable entry from above also pos-sible. Strain relief.



polar white 520619 5/40 6.1

Cooker connection box, flush-mountedNominal cross-section 4 mm²

— Contents: With plaster adjustment ring, insulating mounting box, protective cover for plaster.


white 520227 2/22 6

Cooker connection box, flush-mounted, IP 21Nominal cross-section 4 mm²Terminal block with 5 double terminals.Gasket on the underside of the cover and on the cable outlet.


white 520327 2/22 6

Cooker connection box, surface-mountedNominal cross-section 6 mm²With 5-pole terminal block.


white 520827 5/30 6

Three-section appliance connec-tion box, flush- and surface-mountedNominal cross-section 2.5 mm²2 shatter-proof lids with snap lock, 3 removable terminal blocks with 12 double terminals.Large, clearly visible wiring compartments.Screw and claw fixing for size 60 and size 70 flush-mounted boxes (brick walls, cavity walls and concrete), with removable spreading claws.Dowel fixing also possible.



white 521044 5/20 6

Three-section appliance connec-tion box, flush-mountedNominal cross-section 2.5 mm²2 x 5 double terminals, removable, to connect electric storage heaters or 2 different electrical household appliances.


white 521427 5/10 6

COOKER AND APPLIANCE CONNECTION BOXES

ww

w.m

erte

n.co

m


S

©2010 | Cable junction boxes | COOKER AND APPLIANCE CONNECTION BOXES 509

Three-section appliance connec-tion box, flush-mounted, large ter-minal compartmentNominal cross-section 2.5 mm²3 x 5 double terminals, 3 separate connection chambers to connect electric storage heaters or to power 3 different electrical household appli-ances.


white 521927 1/12 6

Terminal block5-pole, for 2.5 mm2

Double terminals with hole diameter 3.8 mm.Very versatile.

˜ Accessories from: Cooker connection box, art. no. 520427, 521044, 521427, 521927.


white 520900 10/480 6

Cable junction boxes

• Cable junction boxes allow cables of different cross-sections, from 3 x 1.5 mm2 to 5 x 6 mm2, to be connected safely and quickly.

Cable junction box5 x 2.5 mm², ø 27.5 mmFor fixed cabling. With strain relief.Certified in line with VDE 0606.


5 x 2.5 mm², grey 526129 10/200 7

Cable junction box5 x 6 mm², ø 34.5 mmFor fixed cabling. With strain relief.Certified in line with VDE 0606.


5 x 6 mm², grey 526229 10/100 7

ww

w.m

erte

n.co

m

RUBBER SCHUKO PLUGS AND CONNECTORS


S

510 RUBBER SCHUKO PLUGS AND CONNECTORS | Heavy-duty all-rubber plugs and connectors | ©2010

Connection technologyRubber SCHUKO plugs and connectorsConnection technologyRubber SCHUKO plugs and connectorsRubber SCHUKO plugs and connectorsS

SCHUKO rubber plugs and connectors for wind and weather.• According to the regulations regarding electrical power systems

(VDE 0100 § 55e), the only connectors and plugs permissible on building sites are those that conform to DIN 49440 and 49441 and are approved "for harsh conditions". These plugs and connectors bear the hammer symbol.

• IP 44 splashwater protection is achieved in conjunction with a snap collar and hinged lid.

• Modular system for the extension of SCHUKO plugs and connec-tors with snap collar, hinged lid and screwed joint.

• Material: Natural rubber• Uniform design• Easy grip thanks to optimised shaping of the surface• Simple and quick installation thanks to easily accessible screws• The strain relief allows cables with different diameters to be

used

Heavy-duty all-rubber plugs and connectors

• Extra large terminal compartment• Rubber insert for use in extreme conditions• Screws at the front for ultimate tensile strength• Modular system for easy extension• Smart design

Heavy-duty all-rubber SCHUKO plug16 A, AC 250 V, DIN 49441Splash-proof plug. Robust design. Bend protection sleeve with mem-brane seal. Shatter-proof, corrosion-resistant.For cables up to 3 x 2.5 mm2 H 07 RN-F and NSSHöu.


black 123551 10/80 4

Heavy-duty all-rubber SCHUKO connector16 A, AC 250 V, DIN 49440Robust design. Bend protection sleeve with mem-brane seal. Shatter-proof, corrosion-resistant.For cables up to 3 x 2.5 mm2 H 07 RN-F and NSSHöu.

˜ Accessories: Snap collar for SCHUKO connector, art. no. 174196. Replacement hinged lid for all-rubber SCHUKO connector, art. no. 173097. Screwed joint, art. no. 535491.


black 173091 10/60 4

Heavy-duty all-rubber SCHUKO connector with snap collar16 A, AC 250 V, DIN 49440Robust design. Bend protection sleeve with mem-brane seal. Shatter-proof, corrosion-resistant.For cables up to 3 x 2.5 mm2 H 07 RN-F and NSSHöu.

˜ Accessories: Replacement hinged lid for all-rubber SCHUKO con-nector, art. no. 173097. Screwed joint, art. no. 535491.Replacement part: Snap collar for SCHUKO connector, art. no. 174196.


black 173092 10/40 4

Heavy-duty all-rubber SCHUKO connector with snap collar and hinged lid16 A, AC 250 V, DIN 49440Splash-proof connector. Robust design. Bend pro-tection sleeve with membrane seal. Shatter-proof, corrosion-resistant.For cables up to 3 x 2.5 mm2 H 07 RN-F and NSSHöu.

˜ Accessories: Screwed joint, art. no. 535491.Replacement part: Snap collar for SCHUKO connector, art. no. 174196. Replacement hinged lid for all-rubber SCHUKO connector, art. no. 173097.


black 173051 10/60 4

Heavy-duty all-rubber SCHUKO plugs and connectors16 A, AC 250 V, DIN 49440/49441Splash-proof, heavy-duty all-rubber plugs and connectors with snap collar, hinged lid and screwed joint. Robust design. Bend protection sleeve with membrane seal. Shatter-proof, corro-sion-resistant.For cables up to 3 x 2.5 mm2 H 07 RN-F and NSSHöu.

˜ Replacement part: Snap collar for SCHUKO connector, art. no. 174196. Replacement hinged lid for all-rubber SCHUKO connector, art. no. 173097. Screwed joint, art. no. 535491.


black/yellow 535593 1/12 4

Screwed jointFor plugs and connectors with snap collars.

˜ Accessories from: SCHUKO plugs and connectors, art. no. 535451/93, 535593.


yellow 535491 1/80 4


ww

w.m

erte

n.co

m


S

©2010 | All-rubber plugs and connectors | RUBBER SCHUKO PLUGS AND CONNECTORS 511

Snap collar for SCHUKO connector

˜ Accessories from: Rubber SCHUKO connector, art. no. 1740.., 1741... All-rubber SCHUKO connector, art. no. 1729... Heavy-duty all-rubber SCHUKO connector, art. no. 1730...


black 174196 10/120 4

Replacement hinged lid for all-rubber SCHUKO connector

˜ Accessories from: All-rubber SCHUKO connector, art. no. 1729... Heavy-duty all-rubber SCHUKO connector, art. no. 1730...


black 173097 10/120 4

All-rubber plugs and connectors

• Extra large terminal compartment• Rubber insert for use in extreme conditions• Screws at the front for ultimate tensile strength• Modular system for easy extension• Smart design

All-rubber SCHUKO plug16 A, AC 250 V, DIN 49441Splash-proof plug.Robust design, corrosion-resistant. Highly shatter-resistant.For cables up to 3 x 2.5 mm2 H 07 RN-F and NSSHöu.


black 122051 10/80 4

All-rubber SCHUKO connector16 A, AC 250 V, DIN 49440Robust design, corrosion-resistant. Highly shat-ter-resistant.For cables up to 3 x 2.5 mm2 H 07 RN-F and NSSHöu.

˜ Accessories: Snap collar for SCHUKO connector, art. no. 174196. Replacement hinged lid for all-rubber SCHUKO connector, art. no. 173097. Screwed joint, art. no. 535491.


black 172991 10/80 4

All-rubber SCHUKO connector with snap collar16 A, AC 250 V, DIN 49440Robust design, corrosion-resistant. Highly shat-ter-resistant.For cables up to 3 x 2.5 mm2 H 07 RN-F and NSSHöu.

˜ Accessories: Replacement hinged lid for all-rubber SCHUKO con-nector, art. no. 173097. Screwed joint, art. no. 535491.Replacement part: Snap collar for SCHUKO connector, art. no. 174196.


black 172951 10/80 4

All-rubber SCHUKO connector with snap collar and hinged lid16 A, AC 250 V, DIN 49440Splash-proof connector. Robust design, corro-sion-resistant. Highly shatter-resistant.For cables up to 3 x 2.5 mm2 H 07 RN-F and NSSHöu.

˜ Accessories: Screwed joint, art. no. 535491.Replacement part: Snap collar for SCHUKO connector, art. no. 174196. Replacement hinged lid for all-rubber SCHUKO connector, art. no. 173097.


black 172993 10/40 4

All-rubber SCHUKO plugs and con-nectors16 A, AC 250 V, DIN 49440/49441Splash-proof, all-rubber plugs and connectors with snap collar, hinged lid and screwed joint. Robust design, corrosion-resistant. Highly shat-ter-resistant.For cables up to 3 x 2.5 mm2 H 07 RN-F and NSSHöu.

˜ Replacement part: Snap collar for SCHUKO connector, art. no. 174196. Replacement hinged lid for all-rubber SCHUKO connector, art. no. 173097. Screwed joint, art. no. 535491.






yellow 535491 1/80 4

ww

w.m

erte

n.co

m



S

512 RUBBER SCHUKO PLUGS AND CONNECTORS | Rubber plugs and connectors | ©2010




black 174196 10/120 4

Replacement hinged lid for all-rubber SCHUKO connector

˜ Accessories from: All-rubber SCHUKO connector, art. no. 1729... Heavy-duty all-rubber SCHUKO connector, art. no. 1730...


black 173097 10/120 4

Rubber plugs and connectors

• Modular system for easy extension• Smart design

Rubber SCHUKO plug16 A, AC 250 V, DIN 49441Splash-proof plug.With shatter-proof insert.For cables up to 3 x 2.5 mm2 H 07 RN-F and NSSHöu.


black 122151 10/80 4

Rubber SCHUKO connector16 A, AC 250 V, DIN 49440With shatter-proof insert.For cables up to 3 x 2.5 mm2 H 07 RN-F and NSSHöu.

˜ Accessories: Snap collar for SCHUKO connector, art. no. 174196. Replacement hinged lid for all-rubber connector, art. no. 174197. Screwed joint, art. no. 535491.


black 174091 10/80 4

Rubber SCHUKO connector with snap collar16 A, AC 250 V, DIN 49440With shatter-proof insert.For cables up to 3 x 2.5 mm2 H 07 RN-F and NSSHöu.

˜ Accessories: Replacement hinged lid for all-rubber connector, art. no. 174197. Screwed joint, art. no. 535491.Replacement part: Snap collar for SCHUKO connector, art. no. 174196.


black 174051 10/80 4

Rubber SCHUKO connector with snap collar and hinged lid16 A, AC 250 V, DIN 49440Splash-proof connector. With shatter-proof insert. Snap collar and hinged lid.For cables up to 3 x 2.5 mm2 H 07 RN-F and NSSHöu.

˜ Accessories: Screwed joint, art. no. 535491.Replacement part: Snap collar for SCHUKO connector, art. no. 174196. Replacement hinged lid for all-rubber connector, art. no. 174197.


black 174151 10/40 4

Rubber SCHUKO plugs and con-nectors16 A, AC 250 V, DIN 49440/49441Splash-proof, all-rubber plugs and connectors with snap collar, hinged lid and screwed joint. Strain-resistant and shatter-proof plug-in connec-tion.

˜ Replacement part: Snap collar for SCHUKO connector, art. no. 174196. Replacement hinged lid for all-rubber connector, art. no. 174197. Screwed joint, art. no. 535491.






yellow 535491 1/80 4


ww

w.m

erte

n.co

m


S

©2010 | Export versions | RUBBER SCHUKO PLUGS AND CONNECTORS 513




black 174196 10/120 4

Replacement hinged lid for rubber connector

˜ Accessories from: Rubber SCHUKO connector, art. no. 1740.., 1741...


black 174197 10/120 4

Export versions

• Modular system for easy extension.• Handy design.

Rubber SCHUKO plug (DE, FR, BE)16 A, AC 250 V, DIN 49441, CEE 7 Standard Sheet 7With German and French earthing contact.Splash-proof plug.With shatter-proof insert.For cables up to 3 x 2.5 mm2 H 07 RN-F and NSSHöu.


black 123251 10/60 4

Rubber SCHUKO connector

All-rubber SCHUKO triple sus-pended connector16 A, AC 250 V, DIN 49440Made from thermostable rubber. With moulded hook and hinged lids, corrosion-resistant.For cables up to 3 x 2.5 mm2 H 07 RN-F.

˜ Replacement part: Replacement cover for all-rubber SCHUKO tri-ple suspended connector, art. no. 179851.

— Note: The housing screws may only be tightened manually (tight-ening torque 0.8 Nm).


black 179851 1/21 4

Replacement cover for all-rubber SCHUKO triple suspended connec-tor

˜ Accessories from: All-rubber SCHUKO triple suspended connector, art. no. 179851.


black 179891 1/150 4

SCHUKO rubber socket-outlet, surface-mounted16 A, AC 250 V, DIN 49440Made of thermostable rubber, with compression-moulded base, corrosion-resistant, shatter-proof.With screw terminals.


black 225251 10/70 4

ww

w.m

erte

n.co

m

SCHUKO PLUGS AND CONNECTORS


S

514 SCHUKO PLUGS AND CONNECTORS | SCHUKO plugs and sockets | ©2010

Connection technologySCHUKO plugs and connectorsConnection technologySCHUKO plugs and connectorsSCHUKO plugs and connectorsS

SCHUKO plugs and sockets

SCHUKO plug16 A, AC 250 V, DIN 49441Small, shatter-proof quality plug with recessed grips.


white 122427 30/240 3.1grey 122463 30/180 3.1dark brazil 122415 30/180 3.1

SCHUKO plug (DE, FR, BE)16 A, AC 250 V, DIN 49441, CEE 7 Standard Sheet 7With German and French earthing contact.Small, shatter-proof quality plug with recessed grips.


grey 123363 30/180 3.1

SCHUKO connector16 A, AC 250 V, DIN 49440Small, easy-to-grip connector with shatter-proof housing.


white 172427 15/120 3.1grey 172463 15/90 3.1dark brazil 172415 15/90 3.1

Shatter-proof SCHUKO plug16 A, AC 250 V, DIN 49441With lateral insertion and one-piece, shatter-proof housing.


white 120927 25/200 3.1dark brazil 120915 25/150 3.1

Shock-proof SCHUKO plug with bend protection sleeve16 A, AC 250 V, DIN 49441With lateral insertion, bend protection sleeve and one-piece, shatter-proof housing.


grey 120963 20/120 3.1

SCHUKO angled plug with toggle switch16 A, AC 250 V, DIN 49441With 2-pole toggle switch.Shatter-proof lid.


white 128427 15/90 3

SCHUKO angled plug with toggle switch and control lamp16 A, AC 250 V, DIN 49441With 2-pole toggle switch.Shatter-proof lid, control light.


white 128474 15/90 3

SCHUKO angled plug with toggle switch (DE, FR, BE)16 A, AC 250 V, DIN 49441, CEE 7 Standard Sheet 7With German and French earthing contact.With 2-pole toggle switch.Shatter-proof lid.


white 128527 15/90 3

SCHUKO angled plug with toggle switch, control lamp (DE, FR, BE)16 A, AC 250 V, DIN 49441, CEE 7 Standard Sheet 7With German and French/Belgian earthing con-tact.With 2-pole toggle switch.Shock-proof lid, control light.


white 128574 15/90 3

PVC SCHUKO plug16 A, AC 250 V, DIN 49441Splash-proof plug.Large version, with bend protection sleeve.


polar white 125462 15/90 3.1grey 125463 15/120 3.1

PVC SCHUKO plug (DE, FR, BE)16 A, AC 250 V, DIN 49441, CEE 7 Standard Sheet 7With German and French/Belgian earthing con-tact.Splash-proof.Large design, with bend protection sleeve.


grey 123463 15/90 3.1

SCHUKO PLUGS AND CONNECTORS

ww

w.m

erte

n.co

m


S

©2010 | SCHUKO plugs and sockets | SCHUKO PLUGS AND CONNECTORS 515

PVC SCHUKO connector16 A, AC 250 V, DIN 49440Large version, with bend protection sleeve.


polar white 173762 10/60 3.1grey 173763 10/60 3.1

516

ww

w.m

erte

n.de

Article numbers | ©2010

This section contains the Merten

article numbers – divided into two

rubrics:

• Overview, article numbers

• Overview, follow-up products

All numbers are listed in ascending

order.

“Discontinued articles” can be found

on our homepage under

www.merten.de/catalogue

The current prices in a variety of

currencies are available under

www.merten.de/preise

merten in numbersArticle numbers

Article numberoverview

517

ww

w.m

erte

n.de

©2010 | Article numbers

contentsArticle numbers

Number blocks for basic functions, e.g. SCHUKO socket-outlet, call system

Number block for variants,e.g. SCHUKO socket-outlet with plug-in terminals, push-button Mediopt function

Number block for surface and design, e.g. System M Thermoplastic brilliant

Well-known colour number block, e.g. 19 for polar white

meG 2 3 0 0 10 - 3 9

Merten

the new system bAsed on An exAmple

the new merten Article numbers

The new Merten article number system

will make ordering even easier in

future. Each article number consists of

four logical number blocks with two

numbers each. The number blocks

stand for functions, variants, design

and colour code. This system lets you

see whether a plan is consistent and

correct in terms of design, surface and

colour . All Merten article numbers will

in future be preceded by the identifier

MEG. This system applies to every new

article Merten launches in future.

All the advantages at a glance

• simple and quick checking of orders

concerning colour and consistency of

the articles

• the article's function is immediately

recognisable (is it a socket-outlet,

a push-button etc.)

• the type of material is immediately

evident (Duroplastic, Thermoplastic

etc.)

• colour and design number blocks are

always identical

SYSTEM M / INSERTS

ww

w.m

erte

n.co

m

System M

a

12 SYSTEM M / INSERTS | SCHUKO socket-outlets with plug-in terminals | ©2010

System MSystem M / InsertsFlush-mounted rangesSystem M System M/InsertsSystem M / Insertsa

˜ Thermoplastic brilliant: Shatter-proof material with high gloss finish. The version "active white glossy" also contains an antibacterial substance.

˜ Thermoplastic classy matt: Shatter-proof material with high-quality matt finish.

˜ Duroplastic, highly scratch-resistant: Highly scratch-resist-ant material with glossy finish. Not all inserts are available in duroplastic, in these cases you should use thermoplastic bril-liant.

˜ 1-M frames → 92, ATELIER-M frames → 98, M-SMART frames → 104, M-ARC frames → 116, M-STAR frames → 118, M-PLAN real glass frames → 130, M-PLAN metal frames → 132, M-PLAN frames → 122, M-PLAN II frames → 126

– Technical Information: System M dimensions

All articles that match the frames 1-M, ATELIER-M, M-SMART, M-ARC, M-STAR, M-PLAN glass, M-PLAN metal and M-PLAN / M-PLAN II can be found under "System M/Inserts". • Notes on materials: The articles in System M are available

in various materials. All versions are fully compatible with each other.

SCHUKO socket-outlets with plug-in terminals

• Socket-outlets with connecting terminals as per VDE 0620 part 1.

Explanation of symbols:Integrated enhanced protection against accidental contact as per VDE 0620 Part 1 (child protection).

SCHUKO socket-outlet16 A, AC 250 V, DIN 49440Features:• Frontal retrofitting of QuickFlex addi-

tional modules with no disassembling of the socket-outlet.

• Quick-fastening screws for securing of claws.

• Flush-mounted claws with return springs.• High-gloss galvanised retaining ring insu-

lated to the claw.With claw and screw fixing.With plug-in terminals.

˜ Accessories: Central plate with labelling field and surge pro-tection module for SCHUKO socket-outlet, MEG2335-03../-04.., System M Central plate with light outlet and LED light-ing module for SCHUKO socket-outlet, MEG2334-03../-04.., System M Central plate with labelling field and control lamp module for SCHUKO socket-outlet, MEG2333-03../-04.., Sys-tem M


˜ Thermoplastic brilliantwhite, glossy MEG2301-0344 10/60 1.8 newpolar white, glossy MEG2301-0319 10/60 1.8 newactive white, glossy MEG2301-0325 10/60 1 new

˜ Thermoplastic classy mattwhite MEG2301-0444 10/60 1.8 newpolar white MEG2301-0419 10/60 1.8 newanthracite MEG2301-0414 10/60 1.1 newaluminium MEG2301-0460 10/60 1.1 new

˜ Duroplastic, highly scratch-resistantwhite MEG2301-0644 10/60 1.8 newpolar white MEG2301-0619 10/60 1.8 new

SCHUKO socket-outlet insert16 A, AC 250 V, DIN 49440With plug-in terminals.


˜ Thermoplastic brilliantwhite, glossy 233444 10/100 1.8 disc.polar white, glossy 233419 10/100 1.8 disc.active white, glossy 233425 10/100 1 disc.

˜ Thermoplastic classy mattwhite 237144 10/100 1.8 disc.polar white 237119 10/100 1.8 disc.anthracite 237114 10/50 1.1 disc.aluminium 237160 10/50 1.1 disc.

˜ Duroplastic, highly scratch-resistantwhite 235144 10/100 1.8 disc.polar white 235119 10/100 1.8 disc.

SCHUKO socket-outlet16 A, AC 250 V, DIN 49440Integrated protection against accidental contact as per VDE 0620 Part 1 (child pro-tection).Features:• Frontal retrofitting of QuickFlex addi-










SYSTEM M / INSERTS

ww

w.m

erte

n.co

m

System M

a






































SYSTEM M / INSERTS

ww

w.m

erte

n.co

m

System M

a






































SYSTEM M / INSERTS

ww

w.m

erte

n.co

m

System M

a






































Article numberoverview

ARTICLE NUMBER OVERVIEW

Art. no. PU PG Page Art. no. PU PG Page Art. no. PU PG Page w

ww

w.m

erte

n.co

m

Article number overview

518 ARTICLE NUMBER OVERVIEW |©2010

* New articles** Discontinued articles

120915 25/150 3.1 514120927 25/200 3.1 514120963 20/120 3.1 514122051 10/80 4 511122151 10/80 4 512122415 30/180 3.1 514122427 30/240 3.1 514122463 30/180 3.1 514123251 10/60 4 513123363 30/180 3.1 514123463 15/90 3.1 514123551 10/80 4 510125462 15/90 3.1 514125463 15/120 3.1 514128427 15/90 3 514128474 15/90 3 514128527 15/90 3 514128574 15/90 3 514172415 15/90 3.1 514172427 15/120 3.1 514172463 15/90 3.1 514172951 10/80 4 511172991 10/80 4 511172993 10/40 4 511173051 10/60 4 510173091 10/60 4 510173092 10/40 4 510173097 10/120 4 511, 512173762 10/60 3.1 515173763 10/60 3.1 515174051 10/80 4 512174091 10/80 4 512174151 10/40 4 512174196 10/120 4 511, 512, 513174197 10/120 4 513179851 1/21 4 513179891 1/150 4 513200919 10/40 1 35200925 10/40 1 35201219 10/50 1 35201919 10/50 1 151202053 2/60 1.4 151202314 2/60 1.1 35202319 2/60 1 35202360 2/60 1.1 35202419 2/60 1 151202444 2/60 1 151202446 2/60 1.2 151203219 10/50 1 211203919 2/60 1 35203925 2/60 1 35211118** 5/30 1 294211124** 5/30 1 294211194** 5/30 1 297211199** 5/30 1 297211419 5/30 1 193211446 5/30 1.1 193211460 5/30 1.1 193212119 5/30 1 192212129 5/30 1.2 192212144 5/30 1 192212146 5/30 1.2 192212160 5/30 1.2 192212169 5/30 1.2 192213300 1/13 8 36, 152213419 2/96 8 151213444 2/96 8 151213446 2/96 8 151213460 2/96 8 151213514 2/96 8 36213519 2/96 8 36213544 2/96 8 36213560 2/96 8 36213619 2/96 8 36213625 2/96 8 36213644 2/96 8 36214049** 10/40 1 277214084** 10/40 1 277214219** 10/50 1 34

214225** 10/50 1 34214244** 10/50 1 34214349 10/50 1 211214355 10/50 1.2 211214356 10/50 1.2 211214384 10/50 1 211214414** 10/50 1.1 34214419** 10/50 1 34214444** 10/50 1 34214460** 10/50 1.1 34214515** 10/50 1.2 151214519** 10/50 1 151214529** 10/50 1.2 151214543** 10/40 1.4 151214546** 10/40 1.2 151214560** 10/50 1.2 151214569** 10/50 1.2 151214594** 10/40 1 151214599** 10/40 1 151215219** 10/50 1 35215225** 10/50 1 35215244** 10/50 1 35215414** 10/50 1.1 35215419** 10/50 1 35215444** 10/50 1 35215460** 10/50 1.1 35225251 10/70 4 513227239 5/30 2.8 256227319 5/30 2 256227339 5/30 2 256227875 1/20 2 262229275 1/20 2 261229286 1/20 2 262229375 2/8 2 262229377 2/8 2 265229393 2/8 2 262229395 1/4 2 262229399 2/96 2 263230119** 10/40 1.8 109230144** 10/40 1.8 109230205 10/40 1.2 210230219 10/50 1 210230242 10/40 1.2 210230244 10/50 1 210230418** 10/40 1 293230419** 10/40 1 296230424** 10/40 1 293230474** 10/40 1 296230519** 10/40 1.8 109230544** 10/40 1.8 109230660 10/50 1.7 203230719 4/32 1 111230744 4/32 1 111230802** 10/50 1 145230804** 10/50 1 145230806** 10/50 1.2 145230819** 10/50 1 137230844** 10/50 1 137230846** 10/40 1.2 137230860** 10/50 1.2 137230900 1/100 1 89230914** 10/50 1.1 14230919** 10/50 1 14230944** 10/50 1 14230960** 10/50 1.1 14231018** 5/30 1 293231024** 5/60 1 293231094** 5/60 1 297231099** 5/30 1 297231114 5/30 1.1 110231119 5/30 1 110231144 5/30 1 110231160 5/30 1.1 110231319** 2/30 1 110231344** 2/30 1 110231418** 2/30 1 293231424** 2/30 1 293231519 2/30 1 192231544 2/30 1 192

231719 4/32 1 111231744 4/32 1 111232115 5/30 1.2 192232119 5/30 1 192232129 5/30 1.2 192232144 5/30 1 192232146 5/30 1.2 192232160 5/30 1.2 192232169 5/30 1.2 192232205 10/40 1.2 210232219 10/50 1 210232242 10/40 1.2 210232244 10/50 1 210232319 5/30 1 110232519 5/30 1 192232546 5/30 1.1 192232560 5/30 1.1 192232814 1/24 8 18232819 1/24 8 18232844 1/24 8 18232860 1/24 8 18233014** 10/40 2.1 234233015** 10/40 2.1 234233019** 10/40 2.1 234233044** 10/40 2.1 234233060** 10/40 2.1 234233114** 10/40 2.1 234233119** 10/40 2.1 234233144** 10/40 2.1 234233160** 10/40 2.1 234233314** 1/30 2.1 235233315** 1/30 2.1 235233319** 1/30 2.1 235233344** 1/30 2.1 235233360** 1/30 2.1 235233402** 10/50 1 26233404** 10/50 1 26233406** 10/50 1 26233419** 10/100 1.8 12233425** 10/100 1 12233444** 10/100 1.8 12233514** 10/50 2.1 236233515** 10/50 2.1 236233519** 10/50 2.1 236233544** 10/50 2.1 236233560** 10/50 2.1 236233619** 2/30 1 110233625** 2/30 1 110233644** 2/30 1 110233819 1/24 8 18233825 1/24 8 18233844 1/24 8 18233905 10/40 1.2 210233919 10/50 1 210233942 10/40 1.2 210233944 10/50 1 210234005 10/50 1.2 210234019 10/100 1 210234042 10/100 1.2 210234044 10/100 1 210234105 10/40 1.2 210234119 10/50 1 210234142 10/40 1.2 210234144 10/50 1 210234219** 10/40 1 276234274** 10/40 1 276234319** 10/40 1 276234374** 10/40 1 276234419** 10/100 1 276234474** 10/100 1 276234619** 10/40 1 276234674** 10/40 1 276235019** 10/50 1 13235025** 10/50 1 13235044** 10/50 1 13235119** 10/100 1.8 12235144** 10/100 1.8 12235214** 10/20 2.1 235235219** 10/20 2.1 235


Art. no. PU PG Page Art. no. PU PG Page Art. no. PU PG Page

ww

ww

.mer

ten.

com


©2010 | ARTICLE NUMBER OVERVIEW 519


235244** 10/20 2.1 235235260** 10/20 2.1 235235314** 1/15 2.1 236235319** 1/15 2.1 236235344** 1/15 2.1 236235360** 1/15 2.1 236235419** 10/40 1 15235444** 10/40 1 15235539 10/1000 2 257236017 5/35 1.5 270236019 5/35 1.5 270236044 5/35 1.5 270236519 1/30 2 255236539 1/30 2 255236614** 1/50 2.1 16236619** 1/50 2.1 16236644** 1/50 2.1 16236660** 1/50 2.1 16236819 1/30 2 255236839 1/30 2 255236919 1/18 2 255236939 1/18 2 255237019** 1/50 2.1 139, 156237046** 1/50 2.1 139, 156237060** 1/50 2.1 139, 156237094** 1/50 2.1 139, 156237114** 10/50 1.1 12237119** 10/100 1.8 12237144** 10/100 1.8 12237160** 10/50 1.1 12237215** 10/50 1.2 138237219** 10/50 1 138237229** 10/50 1.2 138237243** 10/40 1.4 138237246** 10/40 1.2 138237260** 10/50 1.2 138237269** 10/50 1.2 138237294** 10/40 1 138237299** 10/40 1 138237314** 10/50 1.1 13237319** 10/50 1 13237344** 10/50 1 13237360** 10/50 1.1 13237414** 10/50 1.1 15237419** 10/50 1 15237444** 10/50 1 15237460** 10/50 1.1 15237502** 10/50 1 145237504** 10/50 1 145237506** 10/50 1.2 145237515** 10/50 1.2 136237519** 10/100 1 136237529** 10/50 1.2 136237543** 10/40 1.4 136237546** 10/40 1.2 136237560** 10/50 1.2 136237569** 10/50 1.2 136237594** 10/100 1 136237599** 10/100 1 136237614** 10/50 1.1 15237619** 10/50 1 15237644** 10/50 1 15237660** 10/50 1.1 15237715** 10/50 1.2 137237719** 10/50 1 137237729** 10/50 1.2 137237743** 10/40 1.4 137237744** 10/50 1 137237746** 10/40 1.2 137237760** 10/50 1.2 137237769** 10/50 1.2 137237806** 10/50 1.2 139237815** 10/50 1.2 139237819** 10/50 1 139237829** 10/50 1.2 139237843** 10/40 1.4 139237846** 10/40 1.2 139237860** 10/50 1.2 139237869** 10/50 1.2 139

237894** 10/50 1 139237915** 10/50 1.2 137237919** 10/50 1 137237929** 10/50 1.2 137237943** 10/40 1.4 137237946** 10/40 1.2 137237960** 10/50 1.2 137237969** 10/50 1.2 137237994** 10/40 1 137237999** 10/40 1 137238039 10/60 2.8 254238104 1/30 2 254238105 1/18 2 254238139 1/30 2 254238219** 10/50 1 15238225** 10/50 1 15238244** 10/50 1 15238319** 10/50 1 15238325** 10/50 1 15238344** 10/50 1 15238419** 1/50 2.1 16238425** 1/50 2.1 16238444** 1/50 2.1 16238919 10/60 2 254238939 10/60 2 254239039 5/30 2.8 255239139 5/30 2.8 255239219** 10/40 1.8 109239225** 10/40 1 109239244** 10/40 1.8 109239319 5/30 1 110239325 5/30 1 110239344 5/30 1 110239419 5/30 1 110239425 5/30 1 110239519 5/30 2 255239539 5/30 2 255239619 5/30 2 255239639 5/30 2 255239739 1/14 2 255239819 1/14 2 256239839 1/14 2 256239902** 10/50 1 27239904** 10/50 1 27239906** 10/50 1 27239919** 10/50 1 14239925** 10/50 1 14239944** 10/50 1 14240760 1/30 1.6 246240802** 10/50 1 146240804** 10/50 1 146240806** 10/50 1.2 146240819** 10/50 1 138240844** 10/50 1 138240846** 10/50 1.2 138240860** 10/50 1.2 138240914** 10/50 1.1 14240919** 10/50 1 14240944** 10/50 1 14240960** 10/50 1.1 14246319** 2/30 1 96246325** 2/30 1 96246344** 2/30 1 96246819** 2/30 1 100246825** 2/30 1 100246844** 2/30 1 100247019** 10/40 1.8 100247025** 10/40 1 100247044** 10/40 1.8 100247119** 10/40 1 100247125** 10/40 1 100247144** 10/40 1 100247219** 10/40 1.8 95247225** 10/40 1 95247244** 10/40 1.8 95247319** 10/40 1 95247325** 10/40 1 95247344** 10/40 1 95247414** 10/50 1.1 17

247419** 10/50 1 17247444** 10/50 1 17247460** 10/50 1.1 17247514** 10/50 1.1 17247519** 10/50 1 17247544** 10/50 1 17247560** 10/50 1.1 17247619** 10/50 1 137247644** 10/50 1 137247646** 10/50 1.2 137247660** 10/50 1.2 137247702** 10/50 1 147247704** 10/50 1 147247706** 10/50 1.2 147247819** 10/50 1 140247844** 10/50 1 140247846** 10/40 1.2 140247860** 10/50 1.2 140247902** 10/50 1 146247904** 10/50 1 146247906** 10/50 1.2 146247919** 10/50 1 140247944** 10/50 1 140247946** 10/50 1.2 140247960** 10/50 1.2 140248319** 10/50 1 17248325** 10/50 1 17248344** 10/50 1 17248402** 10/50 1 28248404** 10/50 1 28248406** 10/50 1 28248419** 10/50 1 17248425** 10/50 1 17248444** 10/50 1 17248514** 10/50 1.1 13248519** 10/50 1 13248544** 10/50 1 13248560** 10/50 1.1 13249219** 10/50 1 141249244** 10/50 1 141249246** 10/50 1.2 141249260** 10/50 1.2 141249319** 10/50 1 19249325** 10/50 1 19249344** 10/50 1 19249414** 10/50 1.1 19249419** 10/50 1 19249444** 10/50 1 19249460** 10/50 1.1 19249519** 10/50 1 13249525** 10/50 1 13249544** 10/50 1 13249602** 10/50 1 29249604** 10/50 1 29249606** 10/50 1 29249902** 10/50 1 28249904** 10/50 1 28249906** 10/50 1 28249919** 10/50 1 14249925** 10/50 1 14249944** 10/50 1 14265719** 1/50 8 147265744** 1/50 8 147265746** 1/50 8 147265760** 1/50 8 147265814** 1/50 8 24265819** 1/50 8 24265844** 1/50 8 24265860** 1/50 8 24266819** 1/50 8 24266825** 1/50 8 24266844** 1/50 8 24270119** 10/40 1.8 111270144** 10/40 1.8 111270319** 10/40 1.8 111270344** 10/40 1.8 111270418** 10/40 1 293270424** 10/40 1 293270474** 10/40 1 297



ww

w.m

erte

n.co

m




270619** 10/50 1 143270644** 10/50 1 143270646** 10/40 1.2 143270660** 10/50 1.2 143270960 1/30 1.6 246272068** 2/36 1 295272419 10/50 1 141272444 10/50 1 141272518** 10/40 1 293272524** 10/40 1 293272574** 10/40 1 297272619 10/50 1 211272644 10/50 1 211273419** 10/50 1 22273425** 10/50 1 22273444** 10/50 1 22273519** 1/50 1 276273574** 1/50 1 276274419** 10/50 1 276274464** 10/50 1 295274468** 10/50 1 295274474** 10/50 1 276275017 10/70 1.5 270275019 10/70 1.5 270275044 10/70 1.5 270275219** 10/50 1 22275244** 10/50 1 22275414** 10/50 1.1 23275419** 10/50 1 23275444** 10/50 1 23275460** 10/50 1.1 23275914** 10/50 1.1 23275919** 10/50 1 23275944** 10/50 1 23275960** 10/50 1.1 23276217 10/20 1.5 270276219 10/20 1.5 270276244 10/20 1.5 270276254 10/20 1.5 270277114** 10/50 1.1 22277119** 10/50 1 22277144** 10/50 1 22277160** 10/50 1.1 22277419** 10/50 1 23277425** 10/50 1 23277444** 10/50 1 23277519** 10/50 1 142277560** 10/50 1.2 142277594** 10/50 1 142277719** 10/50 1 143277743** 10/50 1.4 143277744** 10/50 1 143277746** 10/40 1.2 143277760** 10/50 1.2 143278019 10/60 2 254278039 10/60 2 254278219 10/30 1 111278244 10/30 1 111278319 10/30 1 111278344 10/30 1 111278419** 10/40 1.8 101278425** 10/40 1 101278444** 10/40 1.8 101278719** 10/40 1.8 96278725** 10/40 1 96278744** 10/40 1.8 96278919** 10/50 1 23278925** 10/50 1 23278944** 10/50 1 23279075 1/30 2 261279077 1/30 2 265279091 1/30 2 261279175 1/30 2 261279219** 10/40 1.8 111279225** 10/40 1 111279244** 10/40 1.8 111281060 1/30 1.6 246283114** 10/40 2.1 237283115** 10/40 2.1 237

283119** 10/40 2.1 237283144** 10/40 2.1 237283160** 10/40 2.1 237284219** 10/50 1 31284225** 10/50 1 31284244** 10/50 1 31284314** 10/50 1.1 31284319** 10/50 1 31284344** 10/50 1 31284360** 10/50 1.1 31284515** 10/50 1.2 149284519** 10/50 1 149284529** 10/50 1.2 149284543** 10/40 1.4 149284544** 10/50 1 149284546** 10/40 1.2 149284560** 10/50 1.2 149284569** 10/50 1.2 149284619** 10/40 1 277284674** 10/40 1 277284805 10/40 1.2 211284819 10/50 1 211284842 10/40 1.2 211284844 10/50 1 211287414** 10/50 1.1 32287419** 10/50 1 32287444** 10/50 1 32287460** 10/50 1.1 32287819** 10/50 1 149287843** 10/40 1.4 149287846** 10/40 1.1 149287860** 10/50 1.1 149287894** 10/50 1 149287902** 10/50 1 150287904** 10/50 1 150287906** 10/50 1.2 150288019 10/60 2 256288039 10/60 2 256288319** 10/50 1 32288325** 10/50 1 32288344** 10/50 1 32288402** 10/50 1 33288404** 10/50 1 33288406** 10/50 1 33289019 5/30 2 256289039 5/30 2 256289378 1/30 2 262290019 1/60 1 73290025 1/60 1 73290119 5/150 1 79, 427290125 5/150 1 79, 427290144 5/150 1 79, 427290219 10/40 1 73290319 10/50 1 68290325 10/50 1 68290344 10/50 1 68290419 10/50 1 29, 36290425 10/50 1 29, 36290444 10/50 1 29, 36290519 10/50 1 68290544 10/50 1 68290719 10/40 1 176290819 10/40 1 73290914 5/150 1.1 73290919 5/150 1 73290944 5/150 1 73290960 5/150 1.1 73291019 5/150 1 73291025 5/150 1 73291044 5/150 1 73291319 10/180 1 176291329 10/180 1 176291344 10/180 1 176291346 10/180 1 176291360 10/180 1 176291369 10/180 1 176291414 1/60 1.1 73291419 1/60 1 73291460 1/60 1.1 73

291719** 10/120 1 286, 288291774** 10/120 1 286, 288291819 10/120 1 176, 179, 423291844 10/120 1 176, 179, 423291846 10/120 1.1 176, 179, 423291860 10/120 1.1 176, 179, 423292005 10/120 1.2 223, 225, 424292019 10/120 1 223, 225, 424292042 10/120 1.2 223, 225, 424292044 10/120 1 223, 225, 424292105 5/60 1.2 223292119 5/60 1 223292142 5/60 1.2 223292144 5/60 1 223292349 10/180 1 223292355 10/180 1 223292356 10/180 1 223292384 10/180 1 223292519 1/150 1 223292544 1/150 1 223292615 10/120 1.2 177, 180, 424292619 10/120 1 177, 180, 424292629 10/120 1.2 177, 180, 424292643 10/120 1.4 177, 180, 424292644 10/120 1 177, 180, 424292646 10/120 1.2 177, 180, 424292660 10/120 1.2 177, 180, 424292669 10/120 1.2 177, 180, 424292719** 10/120 1 288292774** 10/120 1 288292819** 5/150 1 286, 287, 288292874** 5/150 1 286, 287, 288292919** 5/150 1 288292974** 5/150 1 288293046** 5/150 1.2 178293060** 5/150 1.2 178293146 10/40 1 176293153 1/60 1.4 176293160 10/40 1 176293705 5/200 1.2 224293719 5/200 1 224293742 5/200 1.2 224293744 5/200 1 224293805 1/150 1.2 222, 225, 227, 425293819 1/150 1 222, 225, 227, 425293842 1/150 1.2 222, 225, 227, 425293844 1/150 1 222, 225, 227, 425294115 5/250 1.2 181294119 5/250 1 181294129 5/250 1.2 181294143 5/250 1.4 181294144 5/250 1 181294146 5/250 1.2 181294160 5/250 1.2 181294169 5/250 1.2 181294305 5/250 1.2 226294319 5/250 1 226294342 5/250 1.2 226294344 5/250 1 226294660 1/100 1.6 248294819** 5/150 1 288294874** 5/150 1 288294919** 10/40 1 288294974** 10/40 1 288294994** 10/40 1 283295205 10/50 1.2 227295219 10/50 1 227295242 10/50 1.2 227295244 10/50 1 227295314 10/240 1.1 81295319 10/240 1 81295344 10/240 1 81295360 10/240 1.1 81295514 5/90 1.1 75295519 5/90 1 75295544 5/90 1 75295560 5/90 1.1 75295614 1/50 1.1 69295619 1/50 1 69



ww

ww

.mer

ten.

com




295644 1/50 1 69295660 1/50 1.1 69295714 5/150 1.1 79, 427295719 5/150 1 79, 427295744 5/150 1 79, 427295760 5/150 1.1 79, 427295919 10/50 1 82295944 10/50 1 82296019 5/150 1 72, 77, 81, 424, 438296025 5/150 1 72, 77, 81, 424, 438296044 5/150 1 72, 77, 81, 424, 438296119 10/120 1 74, 78, 424296125 10/120 1 74, 78, 424296144 10/120 1 74, 78, 424296219 10/120 1 74, 78, 423296225 10/120 1 74, 78, 423296244 10/120 1 74, 78, 423296319 1/50 1 69296325 1/50 1 69296344 1/50 1 69296419 10/50 1 68296444 10/50 1 68296519 10/240 1 81296525 10/240 1 81296544 10/240 1 81296719 5/250 1 80296725 5/250 1 80296744 5/250 1 80296819 5/90 1 75296825 5/90 1 75296844 5/90 1 75296919 10/50 1 82296925 10/50 1 82296944 10/50 1 82297019** 10/40 1 277297074** 10/40 1 277297190 10/500 1 29, 36, 152, 327297319 10/50 1 152297344 10/50 1 152297346 10/40 1.2 152297360 10/50 1.2 152297414 10/50 1.1 82297419 10/50 1 82297444 10/50 1 82297460 10/50 1.1 82297514 5/250 1.1 80297519 5/250 1 80297544 5/250 1 80297560 5/250 1.1 80297615 10/50 1.2 183297619 10/50 1 183297629 10/50 1.2 183297643 10/40 1.4 183297644 10/50 1 183297646 10/40 1.2 183297660 10/50 1.2 183297669 10/50 1.2 183297719 10/50 1 171297743 10/40 1.4 171297744 10/50 1 171297746 10/40 1.2 171297760 10/50 1.2 171297815 1/150 1.2 175, 179, 182, 425297819 1/150 1 175, 179, 182, 425,297829 1/150 1.2 175, 179, 182, 425297843 1/150 1.4 175, 179, 182, 425297844 1/150 1 175, 179, 182, 425297846 1/150 1.2 175, 179, 182,425297860 1/150 1.2 175, 179, 182, 425297869 1/150 1.2 175, 179, 182, 425297914 5/150 1.1 72, 77, 81, 424, 438297919 5/150 1 72, 77, 81, 424, 438297944 5/150 1 72, 77, 81, 424, 438297960 5/150 1.1 72, 77, 81, 424, 438298014 10/120 1.1 74, 78, 424298019 10/120 1 74, 78, 424298044 10/120 1 74, 78, 424298060 10/120 1.1 74, 78, 424298194** 1/50 1 171, 283

298199** 1/50 1 171, 283298219 10/50 1 29, 36298244 10/50 1 29, 36298314 10/120 1.1 74, 78, 423298319 10/120 1 74, 78, 423298344 10/120 1 74, 78, 423298360 10/120 1.1 74, 78, 423299460 1/30 1.6 248300217 10/70 1.5 268300219 10/70 1.5 268300244 10/70 1.5 268300517 10/70 1.5 268300519 10/70 1.5 268300544 10/70 1.5 268300617 10/70 1.5 268300619 10/70 1.5 268300644 10/70 1.5 268300717 10/70 1.5 268300719 10/70 1.5 268300744 10/70 1.5 268302217 10/70 1.5 268302219 10/70 1.5 268302244 10/70 1.5 268302617 10/70 1.5 268302619 10/70 1.5 268302644 10/70 1.5 268304817 10/70 1.5 268304819 10/70 1.5 268304844 10/70 1.5 268306619 10/70 1.5 268306644 10/70 1.5 268306844 4/32 1.5 268307001 60/300 1 35, 151, 211, 277308019 10/70 1.5 269308044 10/70 1.5 269310119** 10/400 1 277310174** 10/400 1 277310219** 5/225 1 277310274** 5/225 1 277310319** 5/120 1 278310374** 5/120 1 278310519** 5/225 1 277310574** 10/400 1 277310696** 1/6 1.1 279, 296310819** 10/240 1 278310874** 10/400 1 278310894** 5/225 1 278310899** 5/225 1 278311200** 10/50 1 304311201 10/50 1 304311300 10/50 1 304, 306311500** 10/100 1 304311501** 10/50 1 317311502** 10/50 1 317311600** 10/100 1.8 304311601** 10/50 1 304311700** 10/50 1 304311819** 5/225 1 278311834** 5/225 1 278311839** 5/225 1 278311874** 5/225 1 278313660 1/30 1.6 247313760 1/30 1.6 247314060 1/30 1.6 247315000** 10/100 1.8 304315119** 1/100 1 280315174** 1/100 1 280315319 1/100 1 157315344 1/100 1 157315346 1/100 1.1 157315360 1/100 1.1 157315414 1/100 1.1 46315419 1/100 1 46315444 1/100 1 46315460 1/100 1.1 46315500** 10/50 1 317315519** 5/225 1 281315574** 5/225 1 281315619 1/100 1 46

315625 1/100 1 46315644 1/100 1 46315800** 10/50 1 305315900** 10/50 1 304315901** 10/50 1 304315902** 10/50 1 304315903** 10/50 1 304316546 1/100 1.2 157316919 1/100 8 157316943 1/100 8 157316944 1/100 8 157316946 1/100 8 157316960 1/100 8 157317005 1/100 1.2 216317019 1/100 1 216317042 1/100 1.2 216317044 1/100 1 216317100 1/40 1 310317200 1/40 1 318317234** 1/100 1 281317239** 1/100 1 281317319 1/100 8 214317344 1/100 8 214317400 1/40 8 310317418** 1/100 8 279317424** 1/100 8 279318114 1/60 8 46318119 1/60 8 46318144 1/60 8 46318160 1/60 8 46318260 1/21 1.6 248318460 1/21 1.6 248318501 1/50 8 318318601 1/50 8 310318618** 1/60 8 157, 279318624** 1/60 8 157, 279318646** 1/60 8 157318660** 1/60 8 157318760 1/32 1.6 247318860 1/32 1.6 248318901 1/50 8 318319011 1/250 1 326319012 1/250 1 326319013 1/250 1 326319014 1/250 1 326319016 10/50 1 326319105 1/100 1.2 219319119 1/100 1 219319142 1/100 1.2 219319144 1/100 1 219319215 1/100 1.2 163319219 1/100 1 163319229 1/100 1.2 163319243 1/100 1.4 163319246 1/100 1.2 163319260 1/100 1.2 163319269 1/100 1.2 163319294 1/100 1 163319299 1/100 1 163319314 1/60 8 53319319 1/60 8 53319344 1/60 8 53319360 1/60 8 53319419 1/60 8 53319425 1/60 8 53319444 1/60 8 53319519 1/60 8 46319525 1/60 8 46319544 1/60 8 46322660 1/30 1.6 247325200** 10/50 1 304325500** 10/50 1 304325600** 10/100 1 304330119** 5/225 1 278330174** 5/225 1 278330500 10/50 1 213, 279330519** 5/225 1 278330574** 5/225 1 278330600 10/50 1 213, 279



ww

w.m

erte

n.co

m




330700 10/50 1 213, 279330819** 5/225 1 278330874** 5/225 1 278331505 5/120 1.2 215331519 5/120 1 215331542 5/120 1.2 215331544 5/120 1 215331805 5/120 1.2 213331819 10/120 1 213331842 5/120 1.2 213331844 10/120 1 213331892 5/120 1.2 213331894 10/120 1 213331895 5/120 1.2 213331899 10/120 1 213332105 5/120 1.2 212332119 10/260 1 212332142 5/120 1.2 212332144 10/120 1 212332200 10/50 1 213, 279332205 5/120 1.2 212332219 10/120 1 212332242 5/120 1.2 212332244 10/120 1 212332305 5/120 1.2 212332319 5/120 1 212332342 5/120 1.2 212332344 5/120 1 212332505 5/120 1.2 212332519 10/120 1 212332542 5/120 1.2 212332544 10/120 1 212332600 10/50 1 213, 279332805 5/120 1.2 212332819 10/120 1 212332842 5/120 1.2 212332844 10/120 1 212333105 5/120 1.2 212333119 10/120 1 212333142 5/120 1.2 212333144 10/120 1 212333505 5/120 1.2 213333519 10/120 1 213333542 5/120 1.2 213333544 10/120 1 213333805 5/120 1.2 213333819 10/120 1 213333842 5/120 1.2 213333844 10/120 1 213334605 1/60 8 214334619 1/60 8 214334642 1/60 8 214334644 1/60 8 214334905 1/60 8 216334919 1/60 8 216334942 1/60 8 216334944 1/60 8 216336619 10/50 1 213336644 10/50 1 213340219 10/40 2 252340239 10/40 2 252340319 10/40 2 252340339 10/40 2 252340394 10/40 2 253340519 10/40 2 252340539 10/40 2 252340619 10/60 2 252340639 10/60 2.8 252340719 10/40 2 252340739 10/40 2 252341519 10/40 2 253341539 10/40 2 253342219 10/40 2 252342239 10/40 2 252342294 10/40 2 253342619 10/40 2 252342639 10/40 2 252342694 10/40 2 253343019 5/120 2.1 238

343044 5/120 2.1 238343114 5/120 2.1 237343115 5/120 2.1 237343119 5/120 2.1 237343144 5/120 2.1 237343160 5/120 2.1 237343219 10/40 2 253343319 10/40 2 253343414 5/120 2.1 238343415 5/120 2.1 238343419 5/120 2.1 238343444 5/120 2.1 238343460 5/120 2.1 238343514 5/120 2.1 237343515 5/120 2.1 237343519 5/120 2.1 237343544 5/120 2.1 237343560 5/120 2.1 237343619 10/40 2 253343814 5/120 2.1 238343815 5/120 2.1 238343819 5/120 2.1 238343844 5/120 2.1 238343860 5/120 2.1 238343914 5/120 2.1 238343915 5/120 2.1 238343919 5/120 2.1 238343944 5/120 2.1 238343960 5/120 2.1 238344019 10/40 2 253344039 10/40 2.8 253344819 10/40 2 253344839 10/40 2 253344919 10/40 2 253344939 10/40 2 253345519 10/40 2 254345539 10/40 2 254346629 5/30 2 253347619 1/24 8 254347639 1/24 8 254347919 1/24 8 254347939 1/24 8 254348019 1/30 2 257348039 1/30 2 257348214 1/50 8 238348215 1/50 8 238348219 1/50 8 238348244 1/50 8 238348260 1/50 8 238348314 5/120 2.1 239348315 5/120 2.1 239348319 5/120 2.1 239348344 5/120 2.1 239348360 5/120 2.1 239370675 1/30 2 260370677 1/30 2 264370775 1/30 2 260372275 1/30 2 260372375 1/30 2 260372675 1/30 2 260372677 1/30 2 264375975 1/30 2 260375977 1/30 2 264375997 1/30 2 260375998 1/30 2 260378075 1/30 2 263380539 5/35 1.5 270380554 5/35 1.5 270380617 5/35 1.5 270380619 5/35 1.5 270380644 5/35 1.5 270382539 5/20 1.5 271382554 5/20 1.5 271382617 5/20 1.5 270382619 5/20 1.5 270382644 5/20 1.5 270385219 2/96 1 93385225 2/96 1 93385244 2/96 1 93

385319 2/64 1 93385325 2/64 1 93385344 2/64 1 93385419 2/44 1 93385425 2/44 1 93385444 2/44 1 93385519 1/38 1 94385525 1/38 1 94385544 1/38 1 94387100* 1/100 1 94387119 2/176 1 92387125 2/176 1 92387144 2/176 1 92387219 2/96 1 93387225 2/96 1 93387244 2/96 1 93387319 2/64 1 93387325 2/64 1 93387344 2/64 1 93387419 2/44 1 93387425 2/44 1 93387444 2/44 1 93387519 1/38 1 94387525 1/38 1 94387544 1/38 1 94388119 10/300 1.8 98388125 10/300 1 98388144 10/300 1.8 98388219 10/160 1.8 98388225 10/160 1 98388244 10/160 1.8 98388319 10/100 1 98388325 10/100 1 98388344 10/100 1 98388419 2/44 1 98388425 2/44 1 98388444 2/44 1 98388519 1/38 1 98388525 1/38 1 98388544 1/38 1 98388819 10/90 1 98388825 10/90 1 98388844 10/90 1 98388919 2/64 1 98388925 2/64 1 98388944 2/64 1 98389119 10/300 1.8 92389125 10/300 1 92389144 10/300 1.8 92389219 10/160 1.8 92389225 10/160 1 92389244 10/160 1.8 92389319 10/100 1 92389325 10/100 1 92389344 10/100 1 92389419 2/44 1 92389425 2/44 1 92389444 2/44 1 92389519 1/38 1 92389525 1/38 1 92389544 1/38 1 92389819 10/90 1 92389825 10/90 1 92389844 10/90 1 92389919 2/64 1 92389925 2/64 1 92389944 2/64 1 92390199 1/600 1.6 249391619 5/120 1 69391625 5/120 1 69391644 5/120 1 69391719 5/120 1 69391744 5/120 1 69391814 5/120 1.1 69391819 5/120 1 69391844 5/120 1 69391860 5/120 1.1 69391915 1/100 1.2 172391919 1/100 1 172



ww

ww

.mer

ten.

com




391929 1/100 1.2 172391943 1/100 1.4 172391946 1/100 1.2 172391960 1/100 1.2 172391969 1/100 1.2 172391994 1/100 1 172391999 1/100 1 172392019** 5/120 1 284392074** 5/120 1 284392203** 5/120 1.1 171, 284392274** 5/120 1 171, 283392298** 5/120 1 171, 283392360 1/100 1.6 248392519** 5/90 1 178, 286392574** 5/90 1 178, 286392605 1/100 1.2 220392619 1/100 1 220392642 1/100 1.2 220392644 1/100 1 220392705 1/50 1.2 219392719 1/50 1 219392742 1/50 1.2 219392744 1/50 1 219392795 1/100 1.2 224392796 1/100 1 224392797 1/100 1.2 224392798 1/100 1 224393803 5/120 1 69393819 5/120 1 69393825 5/120 1 69393844 5/120 1 69393903 5/120 1 69393914 5/120 1.1 69393919 5/120 1 69393944 5/120 1 69393960 5/120 1.1 69395019 1/100 1 185395100 20/4080 1 247, 261, 265, 269395120 20/240 1 247, 261, 265, 269395121 20/240 1 247, 261, 265, 326395122 20/240 1 247, 261, 265, 326395123 20/240 1 247, 261, 265, 326395124 20/240 1 247, 261, 265, 326395131 20/240 1 247, 261, 265, 269395132 20/240 1 247, 261, 265, 326395133 20/240 1 247, 261, 265, 326395134 20/240 1 247, 261, 265, 326395135 20/240 1 247, 261, 265, 326395339 1/1000 2 256395412 10/500 1 269395444 10/2040 1 269395500 100/4000 1 89, 185, 241395530 100/4000 1 228, 269, 289395539 1/1000 2 256395568 100/4000 1 228, 269, 289395569 100/4000 1 89, 185, 241, 260395600 100/4000 1 89, 185, 241395630 100/4000 1 228, 269, 289395639 1/1000 2 256395668 100/4000 1 228, 269, 289395669 100/4000 1 89, 185, 241, 260395700 100/4000 1 89, 185, 241395730 100/4000 1 228, 269, 289395739 1/1000 2 256395768 100/4000 1 228, 269, 289395769 100/4000 1 89, 185, 241, 260395800 100/4000 1 89, 185, 241395830 100/4000 1 228, 269, 289395839 1/1000 2 256395868 100/4000 1 228, 269, 289395869 100/4000 1 89, 185, 241, 260395900 100/4000 1 89, 185, 241, 260395930 100/4000 1 228, 269, 289395939 1/1000 2 256396176** 1/150 1 326396276** 1/150 1 326396376 5/1020 1 252, 261, 326396502 10/1000 1 247, 260, 264, 325396576 10/1000 1 247, 261, 264, 325

396611 2/80 2 257, 263396612 2/80 2 257, 263396613 2/80 2 257, 263396676 5/1020 2 257, 263396772 5/300 2 253396774 5/300 2 253396776 10/1000 2 253396876 5/300 2 253397100** 1/100 1 292397118** 10/220 1 291397119** 10/220 1 295397124** 10/220 1 291397174** 10/220 1 295397184** 5/150 1 295397188** 5/150 1 295397198** 10/180 1 291397199** 10/180 1 291397218** 10/120 1 291397219** 10/120 1 295397224** 10/120 1 291397274** 10/120 1 295397296** 10/100 1 292397297** 10/100 1 292397298** 10/100 1 292397299** 10/100 1 292397318** 10/80 1 291397319** 10/80 1 295397324** 10/80 1 291397374** 10/130 1 295397396** 10/60 1 292397397** 10/60 1 292397398** 10/60 1 292397399** 10/60 1 292397418** 10/60 1 291397419** 10/60 1 295397424** 10/60 1 291397474** 10/60 1 295397518** 1/38 1 291397519** 1/38 1 295397524** 1/38 1 291397574** 1/38 1 295397619 5/200 1 65397625 5/200 1 65397644 5/200 1 65397819 5/200 1 65397844 5/200 1 65397998** 10/180 1 291, 292, 295399105 2/180 1.2 229399119 10/360 1 229399142 2/270 1.2 229399144 10/360 1 229399205 2/100 1.2 229399219 10/240 1 229399242 2/100 1.2 229399244 10/240 1 229399305 2/68 1.2 229399319 10/80 1 229399342 2/68 1.2 229399344 10/80 1 229399405 2/44 1.2 229399419 2/44 1 229399442 2/44 1.2 229399444 2/44 1 229399505 1/38 1.2 229399519 1/38 1 229399542 1/38 1.2 229399544 1/38 1 229399898 10/1000 1 89, 186, 228399911 10/300 1.2 229399916 10/300 1.2 229399919 10/300 1.2 229399922 10/300 1.2 229399939 10/600 1.2 229399941 10/600 1.2 229399944 10/300 1.2 229399972 10/300 1.2 229399979 10/300 1.2 229400114 10/60 2.1 241400115 10/60 2.1 241

400119 10/60 2.1 241400144 10/60 2.1 241400160 10/60 2.1 241400214 8/32 2.1 241400215 8/32 2.1 241400219 8/32 2.1 241400244 8/32 2.1 241400260 8/32 2.1 241400314 2/14 2.1 241400315 2/14 2.1 241400319 2/14 2.1 241400344 2/14 2.1 241400360 2/14 2.1 241400414 2/14 2.1 242400415 2/14 2.1 242400419 2/14 2.1 242400444 2/14 2.1 242400460 2/14 2.1 242401114 10/60 2.1 242401115 10/60 2.1 242401119 10/60 2.1 242401144 10/60 2.1 242401160 10/60 2.1 242401214 8/32 2.1 242401215 8/32 2.1 242401219 8/32 2.1 242401244 8/32 2.1 242401260 8/32 2.1 242401314 2/14 2.1 242401315 2/14 2.1 242401319 2/14 2.1 242401344 2/14 2.1 242401360 2/14 2.1 242401414 2/14 2.1 242401415 2/14 2.1 242401419 2/14 2.1 242401444 2/14 2.1 242401460 2/14 2.1 242411515 5/120 1.2 162411519 5/120 1 162411529 5/120 1.2 162411543 5/120 1.4 162411546 5/120 1.2 162411560 5/120 1.2 162411569 5/120 1.2 162411594 5/120 1 162411599 5/120 1 162411815 5/120 1.2 154411819 10/120 1 154411829 5/120 1.2 154411843 5/120 1.4 154411846 5/120 1.2 154411860 5/120 1.2 154411869 5/120 1.2 154411894 10/120 1 154411899 10/120 1 154412019 1/60 2.1 153, 155412046 1/60 2.1 153, 155412060 1/60 2.1 153, 155412094 1/60 2.1 153, 155412115 5/120 1.2 153412119 10/120 1 153412129 5/120 1.2 153412143 5/120 1.4 153412146 5/120 1.2 153412160 5/120 1.2 153412169 5/120 1.2 153412194 10/120 1 153412199 10/120 1 153412215 5/120 1.2 153412219 10/120 1 153412229 5/120 1.2 153412246 5/120 1.2 153412260 5/120 1.2 153412269 5/120 1.2 153412294 10/120 1 153412299 10/120 1 153412306 5/120 1.2 153412315 5/120 1.2 153



ww

w.m

erte

n.co

m




412319 5/120 1 153412329 5/120 1.2 153412343 5/120 1.4 153412346 5/120 1.2 153412360 5/120 1.2 153412369 5/120 1.2 153412394 5/120 1 153412399 5/120 1 153412515 5/120 1.2 153412519 10/120 1 153412529 5/120 1.2 153412543 5/120 1.4 153412546 5/120 1.2 153412560 5/120 1.2 153412569 5/120 1.2 153412594 10/120 1 153412599 10/120 1 153412719 1/60 2.1 154, 156412746 1/60 2.1 154, 156412760 1/60 2.1 154, 156412794 1/60 2.1 154, 156413519 5/120 1 154413543 5/120 1.4 154413544 5/120 1 154413546 5/120 1.2 154413560 5/120 1.2 154413619 5/120 1 154413644 5/120 1 154413646 5/120 1.2 154413660 5/120 1.2 154413915 5/120 1.2 155413919 5/120 1 155413929 5/120 1.2 155413946 5/120 1.2 155413960 5/120 1.2 155413969 5/120 1.2 155413994 5/120 1 155413999 5/120 1 155416619 10/50 1 157416644 10/50 1 157430714 5/225 1.1 42430719 5/225 1 42430744 5/225 1 42430760 5/225 1.1 42430814 5/225 1.1 42430819 5/225 1 42430844 5/225 1 42430860 5/225 1.1 42430914 5/225 1.1 42430919 5/225 1 42430944 5/225 1 42430960 5/225 1.1 42431014 5/225 1.1 40431019 5/225 1 40431044 5/225 1 40431060 5/225 1.1 40431619 1/10 1 45431714 5/225 1.1 42431719 5/225 1 42431744 5/225 1 42431760 5/225 1.1 42431814 5/225 1.1 43431819 5/225 1 43431844 5/225 1 43431860 5/225 1.1 43432019 1/60 2.1 38, 43432025 1/60 2.1 38, 43432044 1/60 2.1 38, 43432119 10/400 1.8 38432125 10/400 1 38432144 10/400 1.8 38432219 5/225 1 39432225 5/225 1 39432244 5/225 1 39432319 10/240 1 38432325 10/240 1 38432344 10/240 1 38432419 5/225 1 52432425 5/225 1 52

432444 5/225 1 52432519 10/240 1 38432525 10/240 1 38432544 10/240 1 38432619 5/225 1 40, 66432625 5/225 1 40, 66432644 5/225 1 40, 66432719 1/60 2.1 40, 44432725 1/60 2.1 40, 44432744 1/60 2.1 40, 44432819 10/240 1.8 40432825 10/240 1 40432844 10/240 1.8 40432919 5/225 1 43432925 5/225 1 43432944 5/225 1 43433014 1/60 2.1 38, 43433019 1/60 2.1 38, 43433044 1/60 2.1 38, 43433060 1/60 2.1 38, 43433114 5/225 1.1 38433119 10/400 1.8 38433144 10/400 1.8 38433160 5/225 1.1 38433214 5/225 1.1 39433219 5/225 1 39433244 5/225 1 39433260 5/225 1.1 39433314 5/225 1.1 38433319 10/240 1 38433344 10/240 1 38433360 5/225 1.1 38433514 5/225 1.1 38433519 10/240 1 38433544 10/240 1 38433560 5/225 1.1 38433619** 1/6 1 45, 109433714 1/60 2.1 40, 44433719 1/60 2.1 40, 44433744 1/60 2.1 40, 44433760 1/60 2.1 40, 44433814 5/225 1.1 40433819 10/240 1.8 40433844 10/240 1.8 40433860 5/225 1.1 40433919 5/225 1 43433944 5/225 1 43434119 10/400 1.8 38434144 10/400 1.8 38434219 5/120 1 39434244 5/120 1 39434319 10/240 1 38434344 10/240 1 38434419 5/120 1 52434444 5/120 1 52434519 10/240 1 38434544 10/240 1 38434614 5/225 1.1 41434619 5/225 1 41434644 5/225 1 41434660 5/225 1.1 41434719 5/225 1 41434725 5/225 1 41434744 5/225 1 41434791 10/1000 1 17, 28, 33, 39, 42434792 10/1000 1 17, 28, 33, 39, 42434793 10/1000 1 17, 28, 33, 39, 42434794 10/1000 1 17, 28, 33, 39, 42434819 10/240 1.8 40434844 10/240 1.8 40434919 5/120 1 43434944 5/120 1 43435119 5/225 1 43435125 5/225 1 43435144 5/225 1 43435219 5/225 1 42435225 5/225 1 42435244 5/225 1 42435319 5/225 1 42

435325 5/225 1 42435344 5/225 1 42435514 5/225 1.1 52435519 5/225 1 52435544 5/225 1 52435560 5/225 1.1 52435614 5/225 1.1 40, 66435619 5/225 1 40, 66435644 5/225 1 40, 66435660 5/225 1 40, 66435819 5/225 1 42435825 5/225 1 42435844 5/225 1 42435919 5/225 1 42435925 5/225 1 42435944 5/225 1 42436019 5/225 1 40436025 5/225 1 40436044 5/225 1 40436619** 10/50 1 46436644** 10/50 1 46436719** 10/50 1 46436725** 10/50 1 46436744** 10/50 1 46437019 5/120 1 155437043 5/120 1.4 155437044 5/120 1 155437046 5/120 1.2 155437060 5/120 1.2 155437119 1/100 1 46437144 1/100 1 46437219 5/120 1 155437243 5/120 1.4 155437244 5/120 1 155437246 5/120 1.2 155437260 5/120 1.2 155437319 1/100 8 46437344 1/100 8 46437514 5/120 1.1 41437519 5/120 1 41437544 5/120 1 41437560 5/120 1.1 41437619 5/120 1 155437643 5/120 1.4 155437644 5/120 1 155437646 5/120 1.2 155437660 5/120 1.2 155437719 5/120 1 43, 67437760 5/120 1.1 43, 67437819 5/120 1 155437843 5/120 1.4 155437844 5/120 1 155437846 5/120 1.2 155437860 5/120 1.2 155437919 5/120 1 155437943 5/120 1.4 155437944 5/120 1 155437946 5/120 1.2 155437960 5/120 1.2 155438019 5/120 1 154438043 5/120 1.4 154438044 5/120 1 154438046 5/120 1.2 154438060 5/120 1.2 154438519 5/120 1 41438525 5/120 1 41438544 5/120 1 41438719 5/120 1 43, 67438725 5/120 1 43, 67442519 10/120 1 183442544 10/120 1 183442619 10/120 1 183442644 10/120 1 183442719 10/120 1 183442744 10/120 1 183442819 10/120 1 183442844 10/120 1 183442919 10/120 1 183442944 10/120 1 183



ww

ww

.mer

ten.

com




443019 10/120 1 183443044 10/120 1 183443119 10/120 1 183443144 10/120 1 183443219 10/120 1 183443244 10/120 1 183443319 10/120 1 184443344 10/120 1 184443419 10/120 1 184443444 10/120 1 184443519 10/120 1 184443544 10/120 1 184443619 10/120 1 184443644 10/120 1 184443719 10/120 1 184443744 10/120 1 184443819 10/120 1 184443844 10/120 1 184443919 10/120 1 184443944 10/120 1 184444019 10/120 1 184444044 10/120 1 184444119 10/120 1 184444144 10/120 1 184444219 10/120 1 185444244 10/120 1 185444319 10/120 1 184444344 10/120 1 184444419 10/120 1 185444444 10/120 1 185444519 10/120 1 185444544 10/120 1 185444619 10/120 1 185444644 10/120 1 185444719 10/120 1 185444744 10/120 1 185444819 10/120 1 185444844 10/120 1 185447319 5/225 1 85447325 5/225 1 85447419 5/225 1 85447425 5/225 1 85447519 5/225 1 85447525 5/225 1 85447619 5/225 1 85447625 5/225 1 85447719 5/225 1 85447725 5/225 1 85447819 5/225 1 85447825 5/225 1 85447919 5/225 1 85447925 5/225 1 85450019 5/150 1 86450025 5/150 1 86450119 5/150 1 86450125 5/150 1 86450219 5/150 1 86450225 5/150 1 86450319 5/150 1 86450325 5/150 1 86450419 5/150 1 86450425 5/150 1 86450519 5/150 1 86450525 5/150 1 86450619 5/150 1 86450625 5/150 1 86450719 5/150 1 86450725 5/150 1 86450819 5/150 1 87450825 5/150 1 87450919 5/150 1 87450925 5/150 1 87451019 5/150 1 87451025 5/150 1 87451119 5/150 1 87451125 5/150 1 87451219 5/150 1 87451225 5/150 1 87451319 5/150 1 87

451325 5/150 1 87451419 5/150 1 87451425 5/150 1 87451519 5/150 1 88451525 5/150 1 88451619 5/150 1 88451625 5/150 1 88451719 5/150 1 88451725 5/150 1 88451819 5/150 1 87451825 5/150 1 87451919 5/150 1 88451925 5/150 1 88452019 5/150 1 88452025 5/150 1 88452119 5/150 1 88452125 5/150 1 88452219 5/150 1 88452225 5/150 1 88452319 5/150 1 88452325 5/150 1 88460019** 10/180 1 178, 287460074** 10/180 1 178, 287460119** 5/150 1 287460174** 5/150 1 287460219** 5/150 1 287460274** 5/150 1 287460319** 5/150 1 287460374** 5/150 1 287460419** 5/150 1 287460474** 5/150 1 287460519** 10/40 1 287, 289460574** 10/40 1 287, 289460619 10/180 1 76460644 10/180 1 76460719** 5/150 1 287460774** 5/150 1 287460819** 5/150 1 289460860 1/30 1.6 249460874** 5/150 1 289460919** 5/150 1 289460974** 5/150 1 289461119** 5/150 1 289461174** 5/150 1 289461318** 1/50 1 284461324** 1/50 1 284461381** 10/300 1 286461385** 10/300 1 286461386** 10/300 1 286461387** 5/150 1 285461388** 10/300 1 284461389** 10/300 1 285461390** 10/300 1 285461391** 10/300 1 284461392** 10/300 1 284461393** 10/300 1 285461394** 10/300 1 286461395** 10/300 1 285461396** 10/300 1 285461397** 10/300 1 285461398** 10/300 1 285461399** 10/300 1 285461518** 5/200 1 180, 288461524** 5/200 1 180, 288461590 4/240 1 80, 181, 428461591 4/240 1 80, 181, 428461592 4/240 1 80, 181, 428461593 4/240 1 80, 181, 428461594 4/240 1 80, 181, 428461619 5/225 1 181461644 5/225 1 181461646 5/225 1.2 181461660 5/225 1.2 181461714 5/200 1.1 80, 427461719 5/200 1 80, 427461744 5/200 1 80, 427461760 5/200 1.1 80, 427461819 10/180 1 76461825 10/180 1 76

461844 10/180 1 76461919 5/200 1 80, 427461925 5/200 1 80, 427461944 5/200 1 80, 427462119 10/220 1.8 104462144 10/220 1.8 104462219 10/120 1.8 104462244 10/120 1.8 104462319 10/80 1 104462344 10/80 1 104462419 2/44 1 105462444 2/44 1 105462519 1/38 1 105462544 1/38 1 105463305 1/50 1.2 220, 426463319 1/50 1 220, 426463342 1/50 1.2 220, 426463344 1/50 1 220, 426463386 10/300 1 221463387 5/150 1 221463388 10/300 1 220463389 10/300 1 221463390 10/300 1 221463391 10/300 1 220463392 10/300 1 220463393 10/300 1 221463395 10/300 1 221463397 10/300 1 221463398 10/300 1 221, 426463399 10/300 1 221, 426463919 5/225 1 80463944 5/225 1 80464019 5/225 1 80464025 5/225 1 80464044 5/225 1 80464215 10/240 1.2 182464219 10/240 1 182464229 10/240 1.2 182464244 10/240 1 182464246 10/240 1.2 182464260 10/240 1.2 182464269 10/240 1.2 182464315 1/50 1.2 172, 425464319 1/50 1 172, 240, 425464329 1/50 1.2 172, 425464344 1/50 1 172, 240, 425464346 1/50 1.2 172, 425464360 1/50 1.2 172, 240, 425464369 1/50 1.2 172, 425464379 10/300 1 71, 173464380 10/300 1 70, 173464381 10/300 1 71, 174464383 10/300 1 71, 174464384 10/300 1 72, 174, 240, 426464386 10/300 1 71, 174464387 5/150 1 71, 174464389 10/300 1 71, 173464390 10/300 1 71, 173464391 10/300 1 70, 173464392 10/300 1 70, 173464393 10/300 1 70, 173464394 10/300 1 71, 174, 426464395 10/300 1 70, 173464396 10/300 1 71, 174464397 10/300 1 70, 173464398 10/300 1 71, 173, 426464399 10/300 1 71, 173, 425464505 10/240 1.2 227464519 10/240 1 227464542 10/240 1.2 227464544 10/240 1 227464614 1/50 1.1 70, 425464619 1/50 1 70, 425464644 1/50 1 70, 425464660 1/50 1.1 70, 425464819** 10/240 1 288464874** 10/240 1 288464919 1/50 1 70, 425464925 1/50 1 70, 425



ww

w.m

erte

n.co

m




464944 1/50 1 70, 425465009 5/500 1 76, 174, 221, 323465010 5/500 1 77, 83, 175, 222465015 5/500 1 76, 175, 222, 323465025 5/500 1 77, 175, 222, 323465104 10/40 1 178, 224, 323465108 10/40 1 178, 224, 323465206 10/50 1 72, 175, 222, 321465226 10/50 1 72, 175, 222, 321465236 10/50 1 72, 175, 222, 321465304 10/40 1 75, 178, 224, 323465404 5/150 1 178, 224, 323465408 5/250 1 178, 224, 323465516 5/250 1 80, 181, 226, 323465518 5/250 1 80, 181, 226, 323465580 2/100 1 72, 174, 240, 324465581 2/100 1 72, 174, 240, 324465582 2/100 1 72, 174, 240, 324465583 2/100 1 72, 174, 240, 324465590 10/600 1 240, 324465591 1/60 1 240, 324465595 5/120 1 80, 181, 226, 323465701 10/40 1 74, 78, 177, 180, 223,465702 10/40 1 75, 79, 177, 180, 223,465703 1/50 1 75, 79, 177, 180, 224,465706 1/50 1 75, 79, 177, 180, 224465707 1/60 1 73, 77, 176, 179, 222465708 1/60 1 74, 79, 177, 180, 223465709 1/60 1 73, 78, 176, 179, 223465710 10/150 1 423465711 1/15 1 422465712 1/16 1 422465713 1/150 1 422465714 1/16 1 422465720 10/50 1 74, 78, 177, 179,465721 1/50 1 74, 78, 177, 179,465760 1/30 1.6 249465930 1/1 1 73, 176, 222, 321466097 1/54 1 81, 182, 227, 324466098 1/54 1 81, 181, 226, 324466099 1/54 1 81, 182, 226, 324466814 2/96 1.1 118466819 2/96 1.1 118466844 2/96 1.1 118466914 10/50 1 82, 182, 227, 325466919 10/50 1 82, 182, 227, 325467014 10/50 1 82, 182, 227, 325467019 10/50 1 82, 182, 227, 325467114 2/176 1.1 118467119 2/176 1.1 118467144 2/176 1.1 118467214 2/96 1.1 118467219 2/96 1.1 118467244 2/96 1.1 118467314 2/64 1.1 119467319 2/64 1.1 119467344 2/64 1.1 119467414 2/44 1.1 119467419 2/44 1.1 119467444 2/44 1.1 119467514 1/38 1.1 119467519 1/38 1.1 119467544 1/38 1.1 119467619 5/150 1 76467625 5/150 1 76467644 5/150 1 76467719 5/150 1 76467725 5/150 1 76467744 5/150 1 76467819 5/150 1 76467825 5/150 1 76467844 5/150 1 76467919 5/150 1 77467925 5/150 1 77467944 5/150 1 77468019 5/150 1 83468025 5/150 1 83468044 5/150 1 83468114 5/150 1.1 76

468119 5/150 1 76468144 5/150 1 76468160 5/150 1.1 76468214 5/150 1.1 76468219 5/150 1 76468244 5/150 1 76468260 5/150 1.1 76468314 5/150 1.1 76468319 5/150 1 76468344 5/150 1 76468360 5/150 1.1 76468419 5/120 1 83468425 5/120 1 83468444 5/120 1 83468514 10/50 1.1 77, 83468519 10/50 1 77, 83468544 10/50 1 77, 83468560 10/50 1.1 77, 83468714 5/150 1.1 77468719 5/150 1 77468744 5/150 1 77468760 5/150 1.1 77468819 1/100 1 82468825 1/100 1 82468844 1/100 1 82468914 5/150 1.1 83468919 5/150 1 83468944 5/150 1 83468960 5/150 1.1 83469019 5/150 1 83469025 5/150 1 83469044 5/150 1 83469119 10/50 1 77, 83469125 10/50 1 77, 83469144 10/50 1 77, 83469214 5/120 1.1 83469219 5/120 1 83469244 5/120 1 83469260 5/120 1.1 83469314 1/100 1.1 82469319 1/100 1 82469344 1/100 1 82469360 1/100 1.1 82469414 5/150 1.1 83469419 5/150 1 83469444 5/150 1 83469460 5/150 1.1 83470119 2/176 1 105470125 2/176 1 105470144 2/176 1 105470219 2/96 1 106470225 2/96 1 106470244 2/96 1 106470319 2/64 1 106470325 2/64 1 106470344 2/64 1 106470419 2/44 1 107470425 2/44 1 107470444 2/44 1 107470519 1/38 1 107470525 1/38 1 107470544 1/38 1 107470914 2/64 1.1 119470919 2/64 1.1 119470944 2/64 1.1 119471219 2/96 1 105471225 2/96 1 105471244 2/96 1 105471319 2/64 1 106471325 2/64 1 106471344 2/64 1 106471419 2/44 1 106471425 2/44 1 106471444 2/44 1 106471519 1/38 1 107471525 1/38 1 107471544 1/38 1 107472214 2/96 1.1 123472219 2/96 1 123

472244 2/96 1 123472260 2/96 1.1 123472314 2/64 1.1 123472319 2/64 1 123472344 2/64 1 123472360 2/64 1.1 123473219 2/96 1 105473244 2/96 1 105473319 2/64 1 106473344 2/64 1 106473419 2/44 1 106473444 2/44 1 106473519 1/38 1 107473544 1/38 1 107474119 2/176 1 105474144 2/176 1 105474219 2/96 1 106474244 2/96 1 106474319 2/64 1 106474344 2/64 1 106474419 2/44 1 107474444 2/44 1 107474519 1/38 1 107474544 1/38 1 107475114 1/88 1.1 132475139 1/88 1.1 132475160 1/88 1.1 132475214 1/48 1.1 132475239 1/48 1.1 132475260 1/48 1.1 132475314 1/32 1.1 132475339 1/32 1.1 132475360 1/32 1.1 132475414 1/22 1.1 132475439 1/22 1.1 132475460 1/22 1.1 132475514 1/22 1.1 132475539 1/22 1.1 132475560 1/22 1.1 132475814 1/48 1.1 132475839 1/48 1.1 132475860 1/48 1.1 132475914 1/32 1.1 132475939 1/32 1.1 132475960 1/32 1.1 132476114 2/176 1.1 123476119 2/176 1 123476144 2/176 1 123476160 2/176 1.1 123476214 2/96 1.1 123476219 2/96 1 123476244 2/96 1 123476260 2/96 1.1 123476314 2/64 1.1 124476319 2/64 1 124476344 2/64 1 124476360 2/64 1.1 124476814 2/96 1.1 118476819 2/96 1.1 118476844 2/96 1.1 118476914 2/64 1.1 119476919 2/64 1.1 119476944 2/64 1.1 119477114 2/176 1.1 118477119 2/176 1.1 118477144 2/176 1.1 118477214 2/96 1.1 118477219 2/96 1.1 118477244 2/96 1.1 118477314 2/64 1.1 119477319 2/64 1.1 119477344 2/64 1.1 119477414 2/44 1.1 119477419 2/44 1.1 119477444 2/44 1.1 119477514 1/38 1.1 119477519 1/38 1.1 119477544 1/38 1.1 119477903 1/32 1.1 130



ww

ww

.mer

ten.

com




477906 1/32 1.1 130477915 1/32 1.1 130477919 1/32 1.1 130477960 1/32 1.1 130477978 1/32 1.1 130478014 5/40 2.1 112478019 5/40 2.1 112478025 5/40 2.1 112478044 5/40 2.1 112478060 5/40 2.1 112478119 10/300 1.8 104478125 10/300 1 104478144 10/300 1.8 104478219 10/200 1.8 104478225 10/200 1 104478244 10/200 1.8 104478319 10/60 1 104478325 10/60 1 104478344 10/60 1 104478419 2/44 1 105478425 2/44 1 105478444 2/44 1 105478519 1/38 1 105478525 1/38 1 105478544 1/38 1 105478819 10/200 1 104478825 10/200 1 104478844 10/200 1 104478919 2/64 1 104478925 2/64 1 104478944 2/64 1 104480160 1/100 1.6 249480260 1/75 1.6 249480360 1/58 1.6 249481106 2/196 1.2 190481115 2/196 1.2 190481119 10/300 1 190481129 2/196 1.2 190481146 2/196 1.2 190481160 2/196 1.2 190481169 2/196 1.2 190481194 10/220 1 190481199 10/220 1 190481215 2/100 1.2 190481219 10/200 1 190481229 2/100 1.2 190481246 2/100 1.2 190481260 2/100 1.2 190481269 2/100 1.2 190481294 10/120 1 190481299 10/120 1 190481315 2/68 1.2 190481319 10/60 1 190481329 2/68 1.2 190481346 2/68 1.2 190481360 2/68 1.2 190481369 2/68 1.2 190481394 10/80 1 190481399 10/80 1 190481415 2/44 1.2 191481419 2/44 1 191481429 2/44 1.2 191481446 2/44 1.2 191481460 2/44 1.2 191481469 2/44 1.2 191481494 10/60 1 191481499 10/60 1 191481515 1/38 1.2 191481519 1/38 1 191481529 1/38 1.2 191481546 1/38 1.2 191481560 1/38 1.2 191481569 1/38 1.2 191481594 1/38 1 191481599 1/38 1 191481819 10/200 1 190481844 10/200 1 190481846 2/96 1.2 190481860 2/96 1.2 190

481919 2/100 1 190481944 2/100 1 190481946 2/100 1.2 190481960 2/100 1.2 190482160 2/176 1.7 202482260 2/102 1.7 202482360 2/60 1.7 202482460 2/42 1.7 202482860 2/102 1.7 202483115 2/160 1.4 196483119 2/160 1.4 196483121 2/160 1.4 196483143 2/160 1.4 196483144 2/160 1.4 196483215 2/90 1.4 196483219 2/90 1.4 196483221 2/90 1.4 196483243 2/90 1.4 196483244 2/90 1.4 196483315 2/72 1.4 196483319 2/72 1.4 196483321 2/72 1.4 196483343 2/72 1.4 196483344 2/72 1.4 196483415 2/44 1.4 196483419 2/44 1.4 196483421 2/44 1.4 196483443 2/44 1.4 196483444 2/44 1.4 196483515 1/38 1.4 196483519 1/38 1.4 196483521 1/38 1.4 196483543 1/38 1.4 196483544 1/38 1.4 196483819 2/90 1.4 196483821 2/90 1.4 196483843 2/90 1.4 196483844 2/90 1.4 196484100 1/100 1 107484119 10/300 1.8 104484144 10/300 1.8 104484219 10/200 1.8 104484244 10/200 1.8 104484319 10/60 1 104484344 10/60 1 104484419 2/44 1 105484444 2/44 1 105484519 1/38 1 105484544 1/38 1 105484819 10/200 1 104484844 10/200 1 104484919 2/64 1 104484944 2/64 1 104485114 2/176 1.1 116485119 10/300 1 116485144 10/300 1 116485160 2/176 1.1 116485170 2/176 1.1 116485178 2/176 1.1 116485214 2/96 1.1 116485219 10/160 1 116485244 10/160 1 116485260 2/96 1.1 116485270 2/96 1.1 116485278 2/96 1.1 116485314 2/64 1.1 116485319 10/60 1 116485344 10/60 1 116485360 2/64 1.1 116485370 2/64 1.1 116485378 2/64 1.1 116485414 2/44 1.1 116485419 2/44 1 116485444 2/44 1 116485460 2/44 1.1 116485470 2/44 1.1 116485478 2/44 1.1 116485514 1/38 1.1 117485519 1/38 1 117

485544 1/38 1 117485560 1/38 1.1 117485570 1/38 1.1 117485578 1/38 1.1 117485814 2/96 1.1 116485819 10/160 1 116485844 10/160 1 116485860 2/96 1.1 116485870 2/96 1.1 116485878 2/96 1.1 116485914 2/64 1.1 116485919 2/64 1 116485944 2/64 1 116485960 2/64 1.1 116485970 2/64 1.1 116485978 2/64 1.1 116486100 1/100 1 124486114 2/176 1.1 122486119 10/300 1 122486144 10/300 1 122486160 2/176 1.1 122486214 2/96 1.1 122486219 10/160 1 122486244 10/160 1 122486260 2/96 1.1 122486314 2/64 1.1 122486319 10/60 1 122486344 10/60 1 122486360 2/64 1.1 122486414 2/44 1.1 123486419 2/44 1 123486444 2/44 1 123486460 2/44 1.1 123486514 1/38 1.1 123486519 1/38 1 123486544 1/38 1 123486560 1/38 1.1 123486814 2/96 1.1 118486819 2/96 1.1 118486844 2/96 1.1 118486914 2/64 1.1 119486919 2/64 1.1 119486944 2/64 1.1 119487114 2/176 1.1 118487119 2/176 1.1 118487144 2/176 1.1 118487214 2/96 1.1 118487219 2/96 1.1 118487244 2/96 1.1 118487314 2/64 1.1 119487319 2/64 1.1 119487344 2/64 1.1 119487414 2/44 1.1 119487419 2/44 1.1 119487444 2/44 1.1 119487514 1/38 1.1 119487519 1/38 1.1 119487544 1/38 1.1 119487803 1/48 1.1 130487806 1/48 1.1 130487815 1/48 1.1 130487819 1/48 1.1 130487860 1/48 1.1 130487878 1/48 1.1 130488114 2/176 1.1 126488119 10/180 1 126488160 2/176 1.1 126488214 2/96 1.1 126488219 10/90 1 126488260 2/96 1.1 126488314 2/64 1.1 126488319 10/60 1 126488360 2/64 1.1 126488814 2/96 1.1 122488819 10/90 1 122488844 10/90 1 122488860 2/96 1.1 122488914 2/64 1.1 122488919 2/64 1 122



ww

w.m

erte

n.co

m




488944 2/64 1 122488960 2/64 1.1 122489103 1/88 1.1 130489106 1/88 1.1 130489115 1/88 1.1 130489119 1/88 1.1 130489160 1/88 1.1 130489178 1/88 1.1 130489203 1/48 1.1 130489206 1/48 1.1 130489215 1/48 1.1 130489219 1/48 1.1 130489260 1/48 1.1 130489278 1/48 1.1 130489303 1/32 1.1 130489306 1/32 1.1 130489315 1/32 1.1 130489319 1/32 1.1 130489360 1/32 1.1 130489378 1/32 1.1 130489403 1/22 1.1 130489406 1/22 1.1 130489415 1/22 1.1 130489419 1/22 1.1 130489460 1/22 1.1 130489478 1/22 1.1 130489503 1/22 1.1 131489506 1/22 1.1 131489515 1/22 1.1 131489519 1/22 1.1 131489560 1/22 1.1 131489578 1/22 1.1 131489960 1/5 1.1 478, 503500114 1/30 8 24, 48500119 1/30 8 24, 48500144 1/30 8 24, 48500160 1/30 8 24, 48501119 1/30 8 24, 48501125 1/30 8 24, 48501144 1/30 8 24, 48502414 1/100 8 49, 338, 359502419 1/100 8 49, 338, 359502444 1/100 8 49, 338, 359502460 1/100 8 49, 338, 359502514 1/60 8 54, 340, 374502519 1/60 8 54, 340, 374502544 1/60 8 54, 340, 374502560 1/60 8 54, 340, 374502614 1/100 8 49, 337, 358502619 1/100 8 49, 337, 358502644 1/100 8 49, 337, 358502660 1/100 8 49, 337, 358503119 10/180 1 126503125 10/180 1 126503219 10/90 1 126503225 10/90 1 126503319 10/60 1 126503325 10/60 1 126503419 1/100 8 49, 338, 359503425 1/100 8 49, 338, 359503444 1/100 8 49, 338, 359503519 1/60 8 54, 340, 374503525 1/60 8 54, 340, 374503544 1/60 8 54, 340, 374503619 1/100 8 49, 337, 358503625 1/100 8 49, 337, 358503644 1/100 8 49, 337, 358504419 1/100 8 160, 338, 359504444 1/100 8 160, 338, 359504446 1/100 8 160, 338, 359504460 1/100 8 160, 338, 359504519 1/60 8 164, 341, 375504544 1/60 8 164, 341, 375504546 1/60 8 164, 341, 375504560 1/60 8 164, 341, 375504619 1/100 8 160, 337, 358504644 1/100 8 160, 337, 358504646 1/100 8 160, 337, 358504660 1/100 8 160, 337, 358

505114 1/40 8 50, 334505119 1/40 8 50, 334505144 1/40 8 50, 334505160 1/40 8 50, 334505214 1/40 8 51, 335505219 1/40 8 51, 335505244 1/40 8 51, 335505260 1/40 8 51, 335505599 1/70 8 333505919 1/6 8 332505960 1/6 8 332506004 1/100 8 336506119 1/40 8 50, 334506125 1/40 8 50, 334506144 1/40 8 50, 334506219 1/40 8 51, 335506225 1/40 8 51, 335506244 1/40 8 51, 335506801 1/12 8 333506923 1/6 8 321, 333, 363, 380507119 1/40 8 161, 336507144 1/40 8 161, 336507146 1/40 8 161, 336507160 1/40 8 161, 336507219 1/40 8 161, 336507244 1/40 8 161, 336507246 1/40 8 161, 336507260 1/40 8 161, 336507501 1/100 8 338507502 1/100 8 339507601 1/100 8 339507801 1/100 8 341507900 1/100 8 339508014 1/40 8 50, 334508019 1/40 8 50, 334508044 1/40 8 50, 334508060 1/40 8 50, 334508119 1/40 8 50, 334508125 1/40 8 50, 334508144 1/40 8 50, 334508219 1/40 8 160, 335508244 1/40 8 160, 335508246 1/40 8 160, 335508260 1/40 8 160, 335508519 1/16 8 339508619 1/16 8 340509201** 1/10 8 342509519 1/12 8.4 341, 392509560 1/12 8.4 341, 392509590 1/48 8.4 342, 393510501 5/300 1.5 95, 99, 272511019** 1/40 1.5 296511074** 1/40 1.5 296511119** 1/40 1.5 296511174** 1/40 1.5 296511219** 1/20 1.5 296511274** 1/20 1.5 296511319** 1/15 1.5 296511374** 1/15 1.5 296512106 1/40 1.5 191, 230, 272512115 1/40 1.5 191, 272512119 1/40 1.5 108, 191, 230, 272512129 1/40 1.5 191, 272512144 1/40 1.5 108, 191, 230, 272512169 1/40 1.5 191, 272512215 1/20 1.5 191, 272512219 1/20 1.5 108, 191, 230, 272512229 1/20 1.5 191, 272512244 1/20 1.5 108, 191, 230, 272512269 1/20 1.5 191, 272512315 1/15 1.5 191, 273512319 1/15 1.5 108, 191, 230, 273512329 1/15 1.5 191, 273512344 1/15 1.5 108, 191, 230, 273512369 1/15 1.5 191, 273512400 1/160 1 127512403 1/56 1 126512499 10/180 1 127512503 1/45 1 126

512599 10/90 1 127512603 1/30 1 126512699 10/60 1 127513219 2/96 1 123513225 2/96 1 123513244 2/96 1 123513319 2/64 1 124513325 2/64 1 124513344 2/64 1 124514119 2/176 1 123514125 2/176 1 123514144 2/176 1 123514219 2/96 1 123514225 2/96 1 123514244 2/96 1 123514319 2/64 1 123514325 2/64 1 123514344 2/64 1 123514919 2/64 1 122514925 2/64 1 122514944 2/64 1 122515119 10/300 1 122515125 10/300 1 122515144 10/300 1 122515219 10/160 1 122515225 10/160 1 122515244 10/160 1 122515319 10/60 1 122515325 10/60 1 122515344 10/60 1 122515419 2/44 1 123515425 2/44 1 123515444 2/44 1 123515519 1/38 1 123515525 1/38 1 123515544 1/38 1 123515819 2/96 1 122515825 2/96 1 122515844 2/96 1 122515990 1/150 2.1 142, 144, 148, 153516094 5/300 1 172516099 5/300 1 172516119 5/75 1 172516144 5/75 1 172516146 5/75 1.2 172516160 5/75 1.2 172516314 1/50 2.1 241516315 1/50 2.1 241516319 1/50 2.1 241516344 1/50 2.1 241516360 1/50 2.1 241516419 5/120 1 89, 186516443 5/120 1.4 89, 186516444 5/120 1 89, 186516446 5/120 1.2 89, 186516460 5/120 1.2 89, 186516514 5/120 2.1 240516515 5/120 2.1 240516519 5/120 2.1 240516544 5/120 2.1 240516560 5/120 2.1 240516614 5/120 2.1 241516615 5/120 2.1 241516619 5/120 2.1 241516644 5/120 2.1 241516660 5/120 2.1 241516819 5/500 1 220516844 5/500 1 220516914 5/120 2.1 240516915 5/120 2.1 240516919 5/120 2.1 240516944 5/120 2.1 240516960 5/120 2.1 240517005** 10/300 1.2 228, 289517042** 10/300 1.2 228, 289517094** 10/300 1 228, 289517099** 10/300 1 228, 289517119** 5/300 1 284517174** 5/300 1 284



ww

ww

.mer

ten.

com




517405** 5/75 1.1 220517453 5/60 1.4 172517474** 5/75 1 172, 220, 284517497** 5/75 1.1 220517498** 5/75 1 172, 220, 284517617 10/300 1.5 271517619 10/300 1.5 271517644 10/300 1.5 271517717 10/210 1.5 271517719 10/210 1.5 271517744 10/210 1.5 271517817 10/240 1.5 271517819 10/240 1.5 271517844 10/240 1.5 271517917 10/200 1.5 271517919 10/200 1.5 271517944 10/200 1.5 271518015** 10/300 1.2 186, 193, 289518019** 10/300 1 186, 193, 289518029** 10/300 1.2 186, 193, 289518044** 10/300 1 186, 193, 289518046** 10/300 1.2 186, 193, 289518060** 10/300 1.2 186, 193, 289518069** 10/300 1.2 186, 193, 289518114 5/300 1.1 69518119 5/300 1 69518144 5/300 1 69518160 5/300 1.1 69518214 5/75 1.1 70518219 5/75 1 70518244 5/75 1 70518260 5/75 1.1 70518314 10/240 2.1 241518319 10/240 2.1 241518344 10/240 2.1 241518360 10/240 2.1 241518415 10/300 1.2 89, 186518419 10/300 1 89, 186518429 10/300 1.2 89, 186518444 10/300 1 89, 186518446 10/300 1.2 89, 186518460 10/300 1.2 89, 186518469 10/300 1.2 89, 186518519 5/300 1 69518525 5/300 1 69518544 5/300 1 69518619 5/75 1 70518625 5/75 1 70518644 5/75 1 70519119 1/40 1.5 94, 99, 272519125 1/40 1.5 94, 99, 272519144 1/40 1.5 94, 99, 272519219 1/20 1.5 94, 99, 272519225 1/20 1.5 94, 99, 272519244 1/20 1.5 94, 99, 272519319 1/15 1.5 94, 99, 272519325 1/15 1.5 94, 99, 272519344 1/15 1.5 94, 99, 272520227 2/22 6 508520327 2/22 6 508520427 5/60 6.1 508520619 5/40 6.1 508520827 5/30 6 508520900 10/480 6 509521044 5/20 6 508521427 5/10 6 508521927 1/12 6 509522175 1/30 2 263523017 10/60 1.5 271523019 10/60 1.5 271523044 10/60 1.5 271526129 10/200 7 509526229 10/100 7 509528068 10/40 1.6 241, 249533497 1/100 8 327533498 1/50 8 22, 26, 30, 142, 144533591 50/900 1 326533963 10/180 2 263, 265534062 10/240 2 257

534119 10/240 2 257534162 10/240 2 257534719 1/150 8 56534725 1/150 8 56534744 1/150 8 56534819 1/150 8 56534825 1/150 8 56534844 1/150 8 56534919 1/150 8 57534925 1/150 8 57534944 1/150 8 57535060 10/1000 1.5 95, 99, 108, 192,535062 10/1000 1.5 95, 99, 108, 192,535063 10/1000 1.5 192, 273535160 20/2000 1.5 95, 99, 108, 192,535162 20/2000 1.5 95, 99, 108, 192,535163 20/2000 1.5 192, 273535451 1/12 4 512535491 1/80 4 510, 511, 512535493 1/12 4 511535563 10/300 2 257535593 1/12 4 510535814 1/150 8 57535819 1/150 8 57535844 1/150 8 57535860 1/150 8 57535919 10/500 2 257535960 10/1000 2 263, 265535962 10/500 2 257536019 10/1000 2 257536061 10/1000 2 263, 265536062 10/1000 2 257536114 1/150 8 56536119 1/150 8 56536144 1/150 8 56536160 1/150 8 56536214 1/150 8 56536219 1/150 8 56536244 1/150 8 56536260 1/150 8 56536302 1/50 8.5 56, 166, 218, 319536304 1/50 8 56, 166, 218, 319536400 1/50 8 57, 166, 219, 320536401 1/50 8 57, 166, 219, 320536492 1/150 8 219536494 1/150 8 219536495 1/150 8 219536499 1/150 8 219536518** 1/150 8 283536524** 1/150 8 283537100 1/12 8 57, 166, 219, 320537119** 1/150 8 283537174** 1/150 8 283537292 1/150 8 219537294 1/150 8 219537295 1/150 8 219537299 1/150 8 219537415 1/150 8 166537419 1/150 8 166537429 1/150 8 166537443 1/150 8 166537444 1/150 8 166537446 1/150 8 166537460 1/150 8 166537469 1/150 8 166537515 1/150 8 166537519 1/150 8 166537529 1/150 8 166537543 1/150 8 166537544 1/150 8 166537546 1/150 8 166537560 1/150 8 166537569 1/150 8 166538000 1/40 8 310538034** 1/100 8 280538039** 1/100 8 280538105 1/100 8 214538119 1/100 8 214538142 1/100 8 214

538144 1/100 8 214538200 1/40 8 310538234** 1/100 8 280538239** 1/100 8 280538315 1/100 8 158538319 1/100 8 158538329 1/100 8 158538343 1/100 8 158538346 1/100 8 158538360 1/100 8 158538369 1/100 8 158538394 1/100 8 158538399 1/100 8 158538415 1/100 8 158538419 1/100 8 158538429 1/100 8 158538443 1/100 8 158538446 1/100 8 158538460 1/100 8 158538469 1/100 8 158538494 1/100 8 158538499 1/100 8 158538519** 1/150 8 283538574** 1/150 8 283538719 1/100 1 52538744 1/100 1 52538819 1/100 8 46538844 1/100 8 46538905 1/100 8 214538919 1/100 8 214538942 1/100 8 214538944 1/100 8 214539014 1/100 8 47539019 1/100 8 47539044 1/100 8 47539060 1/100 8 47539105 1/150 8 218539119 1/150 8 218539142 1/150 8 218539144 1/150 8 218539214 1/100 8 47539219 1/100 8 47539244 1/100 8 47539260 1/100 8 47539319 1/100 8 47539344 1/100 8 47539419 1/100 8 47539444 1/100 8 47539591 14/224 1 326539654 1/1000 1 30, 148, 210539656 1/1000 1 30, 148, 210539715 1/150 8 166539719 1/150 8 166539729 1/150 8 166539743 1/150 8 166539744 1/150 8 166539746 1/150 8 166539760 1/150 8 166539769 1/150 8 166539819 1/100 8 52539844 1/100 8 52539919** 5/120 8 51, 352539944** 5/120 8 51, 352542894** 1/48 8 316, 327, 351, 365542895 10/450 8 327, 395, 413544529 1/45 8.4 412544819 1/35 8.4 412544829 1/35 8.4 413544890 1/35 8.4 412544894 1/35 8.4 413545715 1/20 8.4 388545719 1/20 8.4 388547000 1/50 8.3 418547019 1/23 8.3 418547119 1/23 8.3 418547519 1/10 8.3 417547560 1/10 8.3 417548001 1/60 8.3 418548019 1/10 8.3 416



ww

w.m

erte

n.co

m




548060 1/10 8.3 416548519 1/10 8.3 417548560 1/10 8.3 417550419 1/6 8.4 404550499 1/6 8.4 404550590 1/6 8.4 405550591 1/6 8.4 405550619 1/21 8.4 408, 469550892 20/4080 8 327550992 20/4080 8 327551092 20/4080 8 327551192 20/4080 8 327551292 20/4080 8 327552019 1/60 8 365552119 1/150 8 327, 365554395 1/40 8.4 394554399 1/40 8.4 394561119 1/60 8 68561160 1/60 8 68561219 1/60 8 68561260 1/60 8 68561319 1/40 8 68561360 1/40 8 68564315 1/3 8.4 391564319 1/3 8.4 391564415 1/6 8.4 391564419 1/6 8.4 391565119 1/6 8.4 388565219 1/12 8.4 389565291 1/21 8.4 394565292 1/21 8.4 394565293 1/21 8.4 394565415 1/6 8.4 389565419 1/12 8.4 389565426 1/6 8.4 390565469 1/6 8.4 389565495 1/24 8.4 394565519 1/12 8.4 392565560 1/12 8.4 392565590 1/100 8.4 395565615 1/6 8.4 390565619 1/6 8.4 390565669 1/6 8.4 390567019** 5/120 8 51, 352567025** 5/120 8 51, 352567044** 5/120 8 51, 352567119 1/100 1 52567125 1/100 1 52567144 1/100 1 52567219 1/100 8 46567225 1/100 8 46567244 1/100 8 46567319 1/100 1 46567325 1/100 1 46567419 1/100 8 47567425 1/100 8 47567444 1/100 8 47567519 1/100 8 47567525 1/100 8 47567544 1/100 8 47567619 1/100 8 52567625 1/100 8 52567644 1/100 8 52567714 1/60 8 52, 348567719 1/60 8 52, 348567744 1/60 8 52, 348567760 1/60 8 52, 348567819 1/60 8 52, 348567825 1/60 8 52, 348567844 1/60 8 52, 348568099 1/50 8 311, 353568199 1/100 8 159, 353568200 1/15 1.7 203568201 1/15 1.7 203568300 1/15 1.7 204568301 1/15 1.7 204568499 1/100 8 49, 353568714 1/40 8 55, 398568719 1/40 8 55, 398

568744 1/40 8 55, 398568760 1/40 8 55, 398568819 1/40 8 55, 398568825 1/40 8 55, 398568844 1/40 8 55, 398569000 1/100 1.7 207569090 1/100 8 204569091 1/100 8 206569092 1/100 8 207569100 1/15 1.7 202569101 1/15 1.7 202569190 1/100 1.7 204569200 1/15 1.7 203569201 1/15 1.7 203569290 1/100 1.7 204569300 1/15 1.7 203569301 1/15 1.7 203569390 1/100 1.7 204569400 1/15 1.7 203569401 1/15 1.7 203569500 1/15 1.7 204569501 1/15 1.7 204569614 1/100 8 52569619 1/100 8 52569644 1/100 8 52569660 1/100 8 52569814 1/100 1.1 52569819 1/100 1 52569844 1/100 1 52569860 1/100 1.1 52569914** 5/120 8 51, 352569919** 5/120 8 51, 352569944** 5/120 8 51, 352569960** 5/120 8 51, 352570114 1/100 8 48, 357570119 1/100 8 48, 357570144 1/100 8 48, 357570160 1/100 8 48, 357570222 1/48 8 320, 362, 380, 469570314 1/100 8 48, 357570319 1/100 8 48, 357570344 1/100 8 48, 357570360 1/100 8 48, 357570419 1/100 8 48, 357570444 1/100 8 48, 357570915 1/100 8 159, 358570919 1/100 8 159, 358570929 1/100 8 159, 358570943 1/100 8 159, 358570944 1/100 8 159, 358570946 1/100 8 159, 358570960 1/100 8 159, 358570969 1/100 8 159, 358571119 1/100 8 48, 357571144 1/100 8 48, 357571519** 1/100 8 215, 353571544** 1/100 8 215, 353571617** 1/72 8 269, 360571619** 1/72 8 269, 360571644** 1/72 8 269, 360571715** 1/100 8 162, 353571719** 1/100 8 162, 353571729** 1/100 8 162, 353571743** 1/100 8 162, 353571744** 1/100 8 162, 353571746** 1/100 8 162, 353571760** 1/100 8 162, 353571769** 1/100 8 162, 353571829 1/72 8 360571915 1/10 8 361571930 1/10 8 361571950 1/10 8 361572015** 5/120 8 162, 352572019** 10/120 8 162, 352572029** 5/120 8 162, 352572043** 5/120 8 162, 352572046** 5/120 8 162, 352572060** 5/120 8 162, 352572069** 5/120 8 162, 352

572094** 5/120 8 162, 352572099** 5/120 8 162, 352572199** 1/50 8.5 315, 351572299** 1/72 8.5 315, 351572319** 5/120 8 281572374** 5/120 8 281572499** 1/72 8 315, 351572529 1/72 8 360572599** 1/72 8.5 316, 351572605 5/120 8 215, 350, 352572619 10/120 8 215, 350, 352572642 5/120 8 215, 350, 352572644 10/120 8 215, 350, 352572799** 1/30 8 315, 352572819 1/60 8 55, 399572825 1/60 8 55, 399572844 1/60 8 55, 399572999** 1/50 8 316, 351, 360573299** 1/50 8 316, 351573399 1/60 8 206, 311, 354573417** 1/72 8 269, 360573419** 1/72 8 269, 360573444** 1/72 8 269, 360573529 1/50 8 362573599 1/60 8 206, 312, 354573715 1/100 8 159, 357573719 1/100 8 159, 357573729 1/100 8 159, 357573743 1/100 8 159, 357573744 1/100 8 159, 357573746 1/100 8 159, 357573760 1/100 8 159, 357573769 1/100 8 159, 357573814 1/100 8 238, 357573815 1/100 8 238, 357573819 1/100 8 238, 357573844 1/100 8 238, 357573860 1/100 8 238, 357573998 1/60 8 204, 314, 356, 365573999 1/60 8 314, 356, 365574029 1/50 8 359574099 1/60 8 320, 359574174** 1/100 8 280574198** 1/100 8 280574205 1/100 8 215, 357574219 1/100 8 215, 357574242 1/100 8 215, 357574244 1/100 8 215, 357574697 1/60 8 205, 312, 355574819** 1/100 8 281574874** 1/100 8 281574905 1/100 8 215, 358574919 1/100 8 215, 358574942 1/100 8 215, 358574944 1/100 8 215, 358575305 1/60 8 217, 399575319 1/60 8 217, 399575342 1/60 8 217, 399575344 1/60 8 217, 399575519 1/60 8 55, 398575525 1/60 8 55, 398575544 1/60 8 55, 398575605 1/60 8 218, 400575619 1/60 8 218, 400575642 1/60 8 218, 400575644 1/60 8 218, 400575799 1/50 8 205, 312, 355575897 1/50 8 205, 313, 355576101 10/300 8 327576102 10/300 8 327576397 1/40 8 370, 490576398 1/100 8 319, 369, 490576399 1/24 8 319, 369, 490576499 1/50 8 206, 207, 313, 318576799 1/50 8 56, 165, 218, 239576897 1/50 8 56, 165, 218, 239577099 1/50 8 205, 311, 337, 348577129 1/50 8 361577199** 1/50 8.5 316, 351



ww

ww

.mer

ten.

com




577299 1/60 8 206, 311, 354577399 1/60 8 320, 359577619 1/100 8 48, 357577625 1/100 8 48, 357577644 1/100 8 48, 357577791 1/24 8.1 363577794 1/40 8.1 360577796 1/40 8.1 363577797 1/40 8.1 364577798 1/40 8.1 364577829 1/50 8 362577899 1/60 8 206, 312, 355577919 1/100 8 48, 357577925 1/100 8 48, 357577944 1/100 8 48, 357578114 1/50 8 239, 400578115 1/50 8 239, 400578119 1/50 8 239, 400578144 1/50 8 239, 400578160 1/50 8 239, 400578219** 1/60 8 282578274** 1/60 8 282578319** 1/60 8 283578374** 1/60 8 283578414 1/60 8 55, 398578419 1/60 8 55, 398578444 1/60 8 55, 398578460 1/60 8 55, 398578514 1/60 8 55, 399578519 1/60 8 55, 399578544 1/60 8 55, 399578560 1/60 8 55, 399578615 1/60 8 165, 399578619 1/60 8 165, 399578629 1/60 8 165, 399578644 1/60 8 165, 399578646 1/60 8 165, 399578660 1/60 8 165, 399578669 1/60 8 165, 399579515 1/60 8 165, 399579519 1/60 8 165, 399579529 1/60 8 165, 399579544 1/60 8 165, 399579546 1/60 8 165, 399579560 1/60 8 165, 399579569 1/60 8 165, 399580019** 1/10 8 280580074** 1/10 8 280580119** 1/10 8 282580174** 1/10 8 282580219** 1/100 8 281580274** 1/100 8 281580319** 1/100 8 282580374** 1/100 8 282580419** 1/100 8 282580474** 1/100 8 282580519** 1/100 8 281580574** 1/100 8 281580690 1/2 8 379580691 1/54 8 379580692 1/2 8 379580693 1/25 8 380580698 1/50 8 318, 340, 369580699 1/50 8 319, 340, 369580919** 1/10 8 282580974** 1/10 8 282581119** 1/10 8 282581174** 1/10 8 282581219 1/10 8 47581225 1/10 8 47581244 1/10 8 47581419 1/10 8 54, 375581425 1/10 8 54, 375581444 1/10 8 54, 375581519 1/10 8 54, 377581525 1/10 8 54, 377581544 1/10 8 54, 377581619 1/10 8 55, 378581625 1/10 8 55, 378

581644 1/10 8 55, 378581914* 1/10 8 54, 375581919 1/10 8 54, 375581944 1/10 8 54, 375581960* 1/10 8 54, 375582005 1/10 8 214582019 1/10 8 214582042 1/10 8 214582044 1/10 8 214582105 1/10 8 217, 377582119 1/10 8 217, 377582142 1/10 8 217, 377582144 1/10 8 217, 377582205 1/100 8 216, 370582219 1/100 8 216, 370582242 1/100 8 216, 370582244 1/100 8 216, 370582305 1/100 8 216, 373582319 1/100 8 216, 373582342 1/100 8 216, 373582344 1/100 8 216, 373582405 1/60 8 217, 374582419 1/60 8 217, 374582442 1/60 8 217, 374582444 1/60 8 217, 374582505 1/100 8 216, 371582519 1/100 8 216, 371582542 1/100 8 216, 371582544 1/100 8 216, 371583105 1/10 8 217, 379583119 1/10 8 217, 379583142 1/10 8 217, 379583144 1/10 8 217, 379583619** 5/120 8 279583674** 5/120 8 279583699 1/50 8 317583905 1/10 8 217, 376583919 1/10 8 217, 376583942 1/10 8 217, 376583944 1/10 8 217, 376584015 1/10 8 158584019 1/10 8 158584029 1/10 8 158584043 1/10 8 158584044 1/10 8 158584046 1/10 8 158584060 1/10 8 158584069 1/10 8 158584115 1/10 8 164, 377584119 1/10 8 164, 377584129 1/10 8 164, 377584143 1/10 8 164, 377584144 1/10 8 164, 377584146 1/10 8 164, 377584160 1/10 8 164, 377584169 1/10 8 164, 377584215 1/100 8 163, 370584219 1/100 8 163, 370584229 1/100 8 163, 370584243 1/100 8 163, 370584244 1/100 8 163, 370584246 1/100 8 163, 370584260 1/100 8 163, 370584269 1/100 8 163, 370584315 1/100 8 163, 372584319 1/100 8 163, 372584329 1/100 8 163, 372584343 1/60 8 163, 372584344 1/100 8 163, 372584346 1/100 8 163, 372584360 1/100 8 163, 372584369 1/100 8 163, 372584415 1/60 8 164, 374584419 1/60 8 164, 374584429 1/60 8 164, 374584443 1/60 8 164, 374584444 1/60 8 164, 374584446 1/60 8 164, 374584460 1/60 8 164, 374

584469 1/60 8 164, 374584515 1/100 8 163, 371584519 1/100 8 163, 371584529 1/100 8 163, 371584543 1/60 8 163, 371584544 1/100 8 163, 371584546 1/100 8 163, 371584560 1/100 8 163, 371584569 1/100 8 163, 371585115 1/10 8 164, 378585119 1/10 8 164, 378585129 1/10 8 164, 378585143 1/10 8 164, 378585144 1/10 8 164, 378585146 1/10 8 164, 378585160 1/10 8 164, 378585169 1/10 8 164, 378585919 1/10 8 164, 376585944 1/10 8 164, 376585946 1/10 8 164, 376585960 1/10 8 164, 376586014 1/10 8 47586019 1/10 8 47586044 1/10 8 47586060 1/10 8 47586114 1/10 8 54, 377586119 1/10 8 54, 377586144 1/10 8 54, 377586160 1/10 8 54, 377586214 1/100 8 53, 370586219 1/100 8 53, 370586244 1/100 8 53, 370586260 1/100 8 53, 370586314 1/100 8 53, 372586319 1/100 8 53, 372586344 1/100 8 53, 372586360 1/100 8 53, 372586414 1/100 8 54, 373586419 1/100 8 54, 373586444 1/100 8 54, 373586460 1/100 8 54, 373586514 1/100 8 53, 371586519 1/100 8 53, 371586544 1/100 8 53, 371586560 1/100 8 53, 371586714 1/10 8 55, 378586719 1/10 8 55, 378586744 1/10 8 55, 378586760 1/10 8 55, 378587014 1/100 8 66587019 1/100 8 66587044 1/100 8 66587060 1/100 8 66587090 1/50 8 66587091 1/50 8 66587092 1/50 8 66587093 1/50 8 66587094 1/50 8 66587095 1/150 8 66587096 1/150 8 66587419 1/100 8 66587425 1/100 8 66587444 1/100 8 66587514 1/150 8 68587519 1/150 8 68587544 1/150 8 68587560 1/150 8 68587614 1/100 8 67587619 1/100 8 67587644 1/100 8 67587660 1/100 8 67587719 1/100 8 53, 370587725 1/100 8 53, 370587744 1/100 8 53, 370587819 1/100 8 53, 371587825 1/100 8 53, 371587844 1/100 8 53, 371587919 1/100 8 53, 372587925 1/100 8 53, 372



ww

w.m

erte

n.co

m




587944 1/100 8 53, 372588019 1/100 8 54, 373588025 1/100 8 54, 373588044 1/100 8 54, 373590722 1/12 8 461591019 1/16 8 499591519 1/16 8 499592119 1/40 8 462592144 1/40 8 462592146 1/40 8 462592160 1/40 8 462592219 1/40 8 462592244 1/40 8 462592246 1/40 8 462592260 1/40 8 462592290 1/40 8 394592591 1/60 8 500592599 1/100 8 462594114 1/40 8 461594119 1/40 8 461594144 1/40 8 461594160 1/40 8 461594214 1/40 8 462594219 1/40 8 462594244 1/40 8 462594260 1/40 8 462615014 1/1 9.1 437615022 1/20 9.1 327, 447, 453615034 1/4 9.1 475616002 1/1 9.9 440616719 1/50 9 63, 458616725 1/50 9 63, 458616744 1/50 9 63, 458616790 1/48 9 458, 461616814 1/50 9 63, 458616819 1/50 9 63, 458616844 1/50 9 63, 458616860 1/50 9 63, 458616919 1/50 9 171, 460616944 1/50 9 171, 460616946 1/50 9 171, 460616960 1/50 9 171, 460617119 1/60 9 57, 444617125 1/60 9 57, 444617144 1/60 9 57, 444617219 1/60 9 57, 444617225 1/60 9 57, 444617244 1/60 9 57, 444617419 1/60 9 58, 445617425 1/60 9 58, 445617444 1/60 9 58, 445617519 1/60 9 58, 446617525 1/60 9 58, 446617544 1/60 9 58, 446617819 1/100 9 168, 453618319 1/100 9 59, 447618320 1/100 9 59, 447618419 1/100 9 59, 447618420 1/100 9 59, 447619119 1/150 9 59, 447619125 1/150 9 59, 447619144 1/150 9 59, 447619219 1/150 9 49, 60, 353, 448619225 1/150 9 49, 60, 353, 448619244 1/150 9 49, 60, 353, 448619319 1/150 9 60, 448619325 1/150 9 60, 448619344 1/150 9 60, 448619419 1/150 9 60, 448619425 1/150 9 60, 448619444 1/150 9 60, 448619519 1/150 9 60, 449619525 1/150 9 60, 449619544 1/150 9 60, 449619619 1/150 9 61, 449619625 1/150 9 61, 449619644 1/150 9 61, 449619719 1/150 9 61, 449619725 1/150 9 61, 449

619744 1/150 9 61, 449625114 1/150 9 59, 447625119 1/150 9 59, 447625144 1/150 9 59, 447625160 1/150 9 59, 447625199 1/60 9 59, 447625214 1/150 9 49, 60, 353, 448625219 1/150 9 49, 60, 353, 448625244 1/150 9 49, 60, 353, 448625260 1/150 9 49, 60, 353, 448625299 1/60 9 60, 448625414 1/150 9 60, 448625419 1/150 9 60, 448625444 1/150 9 60, 448625460 1/150 9 60, 448625514 1/150 9 60, 448625519 1/150 9 60, 448625544 1/150 9 60, 448625560 1/150 9 60, 448625614 1/150 9 60, 449625619 1/150 9 60, 449625644 1/150 9 60, 449625660 1/150 9 60, 449625714 1/150 9 61, 449625719 1/150 9 61, 449625744 1/150 9 61, 449625760 1/150 9 61, 449625814 1/150 9 61, 449625819 1/150 9 61, 449625844 1/150 9 61, 449625860 1/150 9 61, 449626119 1/150 9 169, 453626144 1/150 9 169, 453626146 1/150 9 169, 453626160 1/150 9 169, 453626199 1/60 9 169, 453626219 1/150 9 159, 169, 354, 454626244 1/150 9 159, 169, 354, 454626246 1/150 9 159, 169, 354, 454626260 1/150 9 159, 169, 354, 454626299 1/60 9 169, 454626419 1/150 9 169, 453626444 1/150 9 169, 453626446 1/150 9 169, 453626460 1/150 9 169, 453626519 1/150 9 169, 453626544 1/150 9 169, 453626546 1/150 9 169, 453626560 1/150 9 169, 453626619 1/150 9 170, 454626644 1/150 9 170, 454626646 1/150 9 170, 454626660 1/150 9 170, 454626719 1/150 9 170, 454626744 1/150 9 170, 454626746 1/150 9 170, 454626760 1/150 9 170, 454626819 1/150 9 170, 454626844 1/150 9 170, 454626846 1/150 9 170, 454626860 1/150 9 170, 454627514 1/60 9 57, 444627519 1/60 9 57, 444627544 1/60 9 57, 444627560 1/60 9 57, 444627591 10/160 9 59, 447627614 1/60 9 57, 444627619 1/60 9 57, 444627644 1/60 9 57, 444627660 1/60 9 57, 444627814 1/60 9 58, 445627819 1/60 9 58, 445627844 1/60 9 58, 445627860 1/60 9 58, 445627914 1/60 9 58, 446627919 1/60 9 58, 446627944 1/60 9 58, 446627960 1/60 9 58, 446628019 1/60 9 167, 450

628044 1/60 9 167, 450628046 1/60 9 167, 450628060 1/60 9 167, 450628091 10/160 9 168, 453628119 1/60 9 167, 450628144 1/60 9 167, 450628146 1/60 9 167, 450628160 1/60 9 167, 450628219 1/60 9 167, 451628244 1/60 9 167, 451628246 1/60 9 167, 451628260 1/60 9 167, 451628319 1/60 9 168, 451628344 1/60 9 168, 451628346 1/60 9 168, 451628360 1/60 9 168, 451628419 1/60 9 168, 452628444 1/60 9 168, 452628446 1/60 9 168, 452628460 1/60 9 168, 452629993 1/100 9 487630419 1/30 9 62, 407, 467630425 1/30 9 62, 407, 467630444 1/30 9 62, 407, 467630614 1/30 9 62, 407, 467630619 1/30 9 62, 407, 467630644 1/30 9 62, 407, 467630660 1/30 9 62, 407, 467630719 1/6 9 406, 468630760 1/6 9 406, 468630819 1/6 9 406, 468630860 1/6 9 406, 468630919 1/6 9 407, 469630960 1/6 9 407, 469631619 1/30 9 61, 400, 465631625 1/30 9 61, 400, 465631644 1/30 9 61, 400, 465631719 1/30 9 62, 401, 466631725 1/30 9 62, 401, 466631744 1/30 9 62, 401, 466631819 1/30 9 170, 401, 466631844 1/30 9 170, 401, 466631846 1/30 9 170, 401, 466631860 1/30 9 170, 401, 466632515 1/6 9 393, 467632519 1/12 9 393, 467632569 1/6 9 393, 467632614 1/30 9 61, 400, 465632619 1/30 9 61, 400, 465632644 1/30 9 61, 400, 465632660 1/30 9 61, 400, 465632714 1/30 9 62, 401, 466632719 1/30 9 62, 401, 466632744 1/30 9 62, 401, 466632760 1/30 9 62, 401, 466639110 5/400 9 498639118 1/35 9 496639119 1/35 9 496639125 1/50 9 497639126 1/50 9 498639150 5/400 9 498639178 5/400 9 498639180 5/400 9 498639190 10/180 9.1 496639898 1/50 9 463644492 1/30 9.3 464644592 1/10 9.3 464644692 1/10 9.3 465644792 1/10 9.3 464644892 1/30 9.3 464644992 1/30 9.3 465645094 1/10 9.3 497645129 1/10 9.3 496646630 1/10 9.3 493646704 1/10 9.3 489646808 1/10 9.3 486646991 1/10 9.3 494647091 1/10 9.3 494647393 1/30 9.3 485



ww

ww

.mer

ten.

com




647395 1/30 9.3 486647593 1/10 9.3 485647595 1/10 9.3 486647893 1/6 9.3 485647895 1/6 9.3 486648493 1/6 9.3 485648495 1/6 9.3 486648704 1/10 9.3 489649202 1/10 9.3 485649204 1/10 9.3 485649208 1/10 9.3 485649212 1/10 9.3 485649310 1/10 9.3 493649315 1/10 9.3 491649325 1/6 9.3 491649330 1/10 9.3 492649350 1/10 9.3 492649704 1/10 9.3 489649802 1/10 9.3 488649804 1/10 9.3 488649808 1/6 9.3 489649908 1/6 9.3 487649912 1/6 9.3 488660790 1/8 9.1 439662114 1/100 9 61, 435662119 1/100 9 61, 435662144 1/100 9 61, 435662160 1/100 9 61, 435662219 1/100 9 170, 435662244 1/100 9 170, 435662246 1/100 9 170, 435662260 1/100 9 170, 435662319 1/100 9 61, 435662325 1/100 9 61, 435662344 1/100 9 61, 435662929 5/500 9 435663529 1/15 9.3 434663591 1/2 9 473663592 1/2 9 473663593 1/80 9 473663594 1/70 9 474663595 1/16 9 473663596 1/70 9 474663692 1/1 9 472663990 1/1 9 471663991 1/20 9 471663992 1/24 9 471668091 1/20 9 474668092 1/80 9.1 476668990 1/2 8.2 433668991 1/1 8.2 433670802 1/150 9 463670804 1/150 9 463671198 1/50 9 455671199 1/50 9 455671298 1/50 9 455671299 1/50 9 455676029 1/30 9.3 437676090 1/30 9.3 436676099 1/30 9.3 436677029 1/10 9.3 475677129 1/10 9.3 475677290 1/35 9.3 474680129 1/20 9.3 495680191 1/20 9.3 495680204 1/35 9.3 433680329 1/70 9.3 434680602 2/140 9.3 434680790 1/6 9.3 439680999 1/50 9 438, 461, 499681799 1/50 9 437681829 1/35 9.3 438682191 1/25 9.3 470682192 1/25 9.3 470682291 1/25 9.3 500682292 1/25 9.3 500682590 1/6 9 479, 503682591 1/6 9 479, 503682592 1/10 9 479, 503

682593 1/10 9 479, 503682991 1/25 9.3 472683090 1/1 9 478, 502683091 1/8 9 478, 503683092 1/8 9 478, 503683093 1/52 9 478, 502683816 1/10 9.3 432683832 1/10 9.3 432683890 1/10 9.3 433683901 1/10 9.3 433684016 1/10 9.3 432684032 1/10 9.3 432684064 1/10 9.3 432689701 50/2500 9 435689702 50/2500 9 435689801 5/50 9 435689901 5/500 9 434690098 10/300 9 435693003 1/60 9.3 434693004 1/15 9.3 434695190 1/4 9.3 439695191 1/4 9.3 439695192 1/4 9.3 439700119 1/12 8.9 63, 384700125 1/12 8.9 63, 384700144 1/12 8.9 63, 384700219 1/12 8.8 64, 384700225 1/12 8.8 64, 384700244 1/12 8.8 64, 384700519 1/12 8.8 64, 385700525 1/12 8.8 64, 385700544 1/12 8.8 64, 385701114 1/12 8.9 63, 384701119 1/12 8.9 63, 384701144 1/12 8.9 63, 384701160 1/12 8.9 63, 384701214 1/12 8.8 64, 384701219 1/12 8.8 64, 384701244 1/12 8.8 64, 384701260 1/12 8.8 64, 384701514 1/12 8.8 64, 385701519 1/12 8.8 64, 385701544 1/12 8.8 64, 385701560 1/12 8.8 64, 385


ww

ww

.mer

ten.

com



Art. no. PU PG Page Art. no. PU PG Page


MEG2000-0319* 10/60 1 34MEG2000-0325* 10/60 1 34MEG2000-0344* 10/60 1 34MEG2000-0414* 10/60 1.1 34MEG2000-0419* 10/60 1 34MEG2000-0444* 10/60 1 34MEG2000-0460* 10/60 1.1 34MEG2000-4019* 10/60 1 151MEG2000-4044* 10/60 1 151MEG2000-4060* 10/60 1.2 151MEG2000-4143* 10/60 1.4 151MEG2000-4146* 10/60 1.2 151MEG2001-0319* 10/60 1 34MEG2001-0325* 10/60 1 34MEG2001-0344* 10/60 1 34MEG2001-0414* 10/60 1.1 34MEG2001-0419* 10/60 1 34MEG2001-0444* 10/60 1 34MEG2001-0460* 10/60 1.1 34MEG2003-0004* 1/150 1 22, 26, 30, 38, 142, 144, 148, 152MEG2005-0004* 1/150 8 21, 25, 29, 37, 141, 144, 147, 152MEG2100-0414* 10/50 1.1 29, 36MEG2100-0460* 10/50 1.1 29, 36MEG2151-0319* 10/40 1 33MEG2151-0325* 10/40 1 33MEG2151-0344* 10/40 1 33MEG2151-0414* 10/40 1.1 33MEG2151-0419* 10/40 1 33MEG2151-0444* 10/40 1 33MEG2151-0460* 10/40 1.1 33MEG2156-0319* 10/40 1 34MEG2156-0325* 10/40 1 34MEG2156-0344* 10/40 1 34MEG2156-0414* 10/40 1.1 34MEG2156-0419* 10/40 1 34MEG2156-0444* 10/40 1 34MEG2156-0460* 10/40 1.1 34MEG2300-0302* 10/60 1 26MEG2300-0304* 10/60 1 26MEG2300-0306* 10/60 1 26MEG2300-0319* 10/60 1 12MEG2300-0325* 10/60 1 12MEG2300-0344* 10/60 1 12MEG2300-0414* 10/60 1.1 12MEG2300-0419* 10/60 1 12MEG2300-0444* 10/60 1 12MEG2300-0460* 10/60 1.1 12MEG2300-1019* 10/60 1 95MEG2300-1025* 10/60 1 95MEG2300-1044* 10/60 1 95MEG2300-1219* 10/60 1 100MEG2300-1225* 10/60 1 100MEG2300-1244* 10/60 1 100MEG2300-1419* 10/60 1 109MEG2300-1425* 10/60 1 109MEG2300-1444* 10/60 1 109MEG2300-1519* 10/60 1 109MEG2300-1544* 10/60 1 109MEG2300-4002* 10/60 1 145MEG2300-4004* 10/60 1 145MEG2300-4006* 10/60 1 145MEG2300-4015* 10/60 1.2 136MEG2300-4019* 10/60 1 136MEG2300-4029* 10/60 1.2 136MEG2300-4044* 10/60 1 136MEG2300-4060* 10/60 1.2 136MEG2300-4069* 10/60 1.2 136MEG2300-4143* 10/60 1.4 136MEG2300-4146* 10/60 1.2 136MEG2300-7214* 10/60 2.1 236MEG2300-7215* 10/60 2.1 236MEG2300-7219* 10/60 2.1 236MEG2300-7244* 10/60 2.1 236MEG2300-7260* 10/60 2.1 236MEG2301-0319* 10/60 1.8 12MEG2301-0325* 10/60 1 12MEG2301-0344* 10/60 1.8 12MEG2301-0414* 10/60 1.1 12MEG2301-0419* 10/60 1.8 12

MEG2301-0444* 10/60 1.8 12MEG2301-0460* 10/60 1.1 12MEG2301-0619* 10/60 1.8 12MEG2301-0644* 10/60 1.8 12MEG2301-1019* 10/60 1.8 95MEG2301-1025* 10/60 1 95MEG2301-1044* 10/60 1.8 95MEG2301-1219* 10/60 1.8 99MEG2301-1225* 10/60 1 99MEG2301-1244* 10/60 1.8 99MEG2301-1419* 10/60 1.8 109MEG2301-1425* 10/60 1 109MEG2301-1444* 10/60 1.8 109MEG2301-1519* 10/60 1.8 109MEG2301-1544* 10/60 1.8 109MEG2301-1619* 10/60 1.8 109MEG2301-1644* 10/60 1.8 109MEG2301-4019* 10/60 1 136MEG2301-4060* 10/60 1.2 136MEG2301-4143* 10/60 1.4 136MEG2301-4146* 10/60 1.2 136MEG2301-4219* 10/60 1 136MEG2301-4244* 10/60 1 136MEG2302-0302* 10/60 1 27MEG2302-0304* 10/60 1 27MEG2302-0306* 10/60 1 27MEG2302-0307* 10/40 1 27MEG2302-0319* 10/60 1 14MEG2302-0325* 10/60 1 14MEG2302-0329* 10/40 1 27MEG2302-0344* 10/60 1 14MEG2302-0378* 10/40 1 27MEG2302-0414* 10/60 1.1 14MEG2302-0419* 10/60 1 14MEG2302-0444* 10/60 1 14MEG2302-0460* 10/60 1.1 14MEG2302-4002* 10/60 1 145MEG2302-4004* 10/60 1 145MEG2302-4006* 10/60 1 145MEG2302-4019* 10/60 1 137MEG2302-4044* 10/60 1 137MEG2302-4060* 10/60 1.2 137MEG2302-4146* 10/60 1.2 137MEG2303-0302* 1/50 1 27MEG2303-0304* 1/50 1 27MEG2303-0306* 1/50 1 27MEG2303-0319* 1/50 1 14MEG2303-0325* 1/50 1 14MEG2303-0344* 1/50 1 14MEG2303-0414* 1/50 1.1 14MEG2303-0419* 1/50 1 14MEG2303-0444* 1/50 1 14MEG2303-0460* 1/50 1.1 14MEG2303-4002* 1/50 1 146MEG2303-4004* 1/50 1 146MEG2303-4006* 1/50 1 146MEG2303-4019* 1/50 1 138MEG2303-4044* 1/50 1 138MEG2303-4060* 1/50 1.2 138MEG2303-4146* 1/50 1.2 138MEG2304-0319* 1/50 8 13MEG2304-0325* 1/50 8 13MEG2304-0344* 1/50 8 13MEG2304-0414* 1/50 8 13MEG2304-0419* 1/50 8 13MEG2304-0444* 1/50 8 13MEG2304-0460* 1/50 8 13MEG2305-0319* 1/50 8 18MEG2305-0325* 1/50 8 18MEG2305-0344* 1/50 8 18MEG2305-0414* 1/50 8 18MEG2305-0419* 1/50 8 18MEG2305-0444* 1/50 8 18MEG2305-0460* 1/50 8 18MEG2305-4019* 1/50 8 141MEG2305-4044* 1/50 8 141MEG2305-4060* 1/50 8 141MEG2305-4146* 1/50 8 141MEG2310-0319* 10/60 1 15


ww

ww

.mer

ten.

com





MEG2310-0325* 10/60 1 15MEG2310-0344* 10/60 1 15MEG2310-0414* 10/60 1.1 15MEG2310-0419* 10/60 1 15MEG2310-0444* 10/60 1 15MEG2310-0460* 10/60 1.1 15MEG2310-0619* 10/60 1 15MEG2310-0644* 10/60 1 15MEG2310-4015* 10/60 1.2 139MEG2310-4019* 10/60 1 139MEG2310-4029* 10/60 1.2 139MEG2310-4044* 10/60 1 139MEG2310-4060* 10/60 1.2 139MEG2310-4069* 10/60 1.2 139MEG2310-4143* 10/60 1.4 139MEG2310-4146* 10/60 1.2 139MEG2310-7214* 10/60 2.1 234MEG2310-7215* 10/60 2.1 234MEG2310-7219* 10/60 2.1 234MEG2310-7244* 10/60 2.1 234MEG2310-7260* 10/60 2.1 234MEG2311-0319* 10/60 1 15MEG2311-0325* 10/60 1 15MEG2311-0344* 10/60 1 15MEG2311-0414* 10/60 1.1 15MEG2311-0419* 10/60 1 15MEG2311-0444* 10/60 1 15MEG2311-0460* 10/60 1.1 15MEG2311-4019* 10/60 1 138MEG2311-4060* 10/60 1.2 138MEG2311-4143* 10/60 1.4 138MEG2311-4146* 10/60 1.2 138MEG2311-4219* 10/60 1 138MEG2311-4244* 10/60 1 138MEG2312-0319* 10/60 1 16MEG2312-0325* 10/60 1 16MEG2312-0344* 10/60 1 16MEG2312-0414* 10/60 1.1 16MEG2312-0419* 10/60 1 16MEG2312-0444* 10/60 1 16MEG2312-0460* 10/60 1.1 16MEG2312-4019* 10/60 1 140MEG2312-4044* 10/60 1 140MEG2312-4060* 10/60 1.2 140MEG2312-4146* 10/60 1.2 140MEG2312-7214* 10/60 2.1 234MEG2312-7215* 10/60 2.1 234MEG2312-7219* 10/60 2.1 234MEG2312-7244* 10/60 2.1 234MEG2312-7260* 10/60 2.1 234MEG2313-0302* 1/50 1 28MEG2313-0304* 1/50 1 28MEG2313-0306* 1/50 1 28MEG2313-0319* 1/50 1 17MEG2313-0325* 1/50 1 17MEG2313-0344* 1/50 1 17MEG2313-0414* 1/50 1.1 17MEG2313-0419* 1/50 1 17MEG2313-0444* 1/50 1 17MEG2313-0460* 1/50 1.1 17MEG2313-4002* 1/50 1 146MEG2313-4004* 1/50 1 146MEG2313-4006* 1/50 1 146MEG2313-4019* 1/50 1 140MEG2313-4044* 1/50 1 140MEG2313-4060* 1/50 1.2 140MEG2313-4146* 1/50 1.2 140MEG2314-0319* 1/50 2.1 16, 44MEG2314-0325* 1/50 2.1 16, 44MEG2314-0344* 1/50 2.1 16, 44MEG2314-0414* 1/50 2.1 16, 44MEG2314-0419* 1/50 2.1 16, 44MEG2314-0444* 1/50 2.1 16, 44MEG2314-0460* 1/50 2.1 16, 44MEG2314-4019* 1/50 2.1 139, 156MEG2314-4044* 1/50 2.1 139, 156MEG2314-4060* 1/50 2.1 139, 156MEG2314-4146* 1/50 2.1 139, 156MEG2315-0319* 1/40 1 16

MEG2315-0325* 1/40 1 16MEG2315-0344* 1/40 1 16MEG2315-0414* 1/40 1.1 16MEG2315-0419* 1/40 1 16MEG2315-0444* 1/40 1 16MEG2315-0460* 1/40 1.1 16MEG2316-7214* 1/30 2.1 235MEG2316-7215* 1/30 2.1 235MEG2316-7219* 1/30 2.1 235MEG2316-7244* 1/30 2.1 235MEG2316-7260* 1/30 2.1 235MEG2317-7214* 1/30 2.1 235MEG2317-7215* 1/30 2.1 235MEG2317-7219* 1/30 2.1 235MEG2317-7244* 1/30 2.1 235MEG2317-7260* 1/30 2.1 235MEG2318-7214* 1/15 2.1 236MEG2318-7215* 1/15 2.1 236MEG2318-7219* 1/15 2.1 236MEG2318-7244* 1/15 2.1 236MEG2318-7260* 1/15 2.1 236MEG2328-1019* 2/30 1 96MEG2328-1025* 2/30 1 96MEG2328-1044* 2/30 1 96MEG2328-1219* 2/30 1 100MEG2328-1225* 2/30 1 100MEG2328-1244* 2/30 1 100MEG2328-1419* 2/30 1 110MEG2328-1425* 2/30 1 110MEG2328-1444* 2/30 1 110MEG2328-1519* 2/30 1 110MEG2328-1544* 2/30 1 110MEG2333-0319* 1/60 1 21, 25MEG2333-0325* 1/60 1 21, 25MEG2333-0344* 1/60 1 21, 25MEG2333-0414* 1/60 1.1 21, 25MEG2333-0419* 1/60 1 21, 25MEG2333-0444* 1/60 1 21, 25MEG2333-0460* 1/60 1.1 21, 25MEG2334-0319* 1/60 8 21, 25MEG2334-0325* 1/60 8 21, 25MEG2334-0344* 1/60 8 21, 25MEG2334-0414* 1/60 8 21, 25MEG2334-0419* 1/60 8 21, 25MEG2334-0444* 1/60 8 21, 25MEG2334-0460* 1/60 8 21, 25MEG2335-0319* 1/60 8 21, 25MEG2335-0325* 1/60 8 21, 25MEG2335-0344* 1/60 8 21, 25MEG2335-0414* 1/60 8 21, 25MEG2335-0419* 1/60 8 21, 25MEG2335-0444* 1/60 8 21, 25MEG2335-0460* 1/60 8 21, 25MEG2350-0319* 10/60 1 19MEG2350-0325* 10/60 1 19MEG2350-0344* 10/60 1 19MEG2350-0414* 10/60 1.1 19MEG2350-0419* 10/60 1 19MEG2350-0444* 10/60 1 19MEG2350-0460* 10/60 1.1 19MEG2350-4019* 10/60 1 141MEG2350-4044* 10/60 1 141MEG2350-4060* 10/60 1.2 141MEG2350-4146* 10/60 1.2 141MEG2351-0319* 10/40 1 19MEG2351-0325* 10/40 1 19MEG2351-0344* 10/40 1 19MEG2351-0414* 10/40 1.1 19MEG2351-0419* 10/40 1 19MEG2351-0444* 10/40 1 19MEG2351-0460* 10/40 1.1 19MEG2352-0319* 10/40 1 19MEG2352-0325* 10/40 1 19MEG2352-0344* 10/40 1 19MEG2352-0414* 10/40 1.1 19MEG2352-0419* 10/40 1 19MEG2352-0444* 10/40 1 19MEG2352-0460* 10/40 1.1 19MEG2353-0319* 10/40 1 20


ww

ww

.mer

ten.

com





MEG2353-0325* 10/40 1 20MEG2353-0344* 10/40 1 20MEG2353-0414* 10/40 1.1 20MEG2353-0419* 10/40 1 20MEG2353-0444* 10/40 1 20MEG2353-0460* 10/40 1.1 20MEG2354-0319* 10/40 1 20MEG2354-0325* 10/40 1 20MEG2354-0344* 10/40 1 20MEG2354-0414* 10/40 1.1 20MEG2354-0419* 10/40 1 20MEG2354-0444* 10/40 1 20MEG2354-0460* 10/40 1.1 20MEG2355-0319* 10/40 1 20MEG2355-0325* 10/40 1 20MEG2355-0344* 10/40 1 20MEG2355-0414* 10/40 1.1 20MEG2355-0419* 10/40 1 20MEG2355-0444* 10/40 1 20MEG2355-0460* 10/40 1.1 20MEG2356-0319* 10/40 1 20MEG2356-0325* 10/40 1 20MEG2356-0344* 10/40 1 20MEG2356-0414* 10/40 1.1 20MEG2356-0419* 10/40 1 20MEG2356-0444* 10/40 1 20MEG2356-0460* 10/40 1.1 20MEG2370-0319* 10/60 1 13MEG2370-0325* 10/60 1 13MEG2370-0344* 10/60 1 13MEG2370-0414* 10/60 1.1 13MEG2370-0419* 10/60 1 13MEG2370-0444* 10/60 1 13MEG2370-0460* 10/60 1.1 13MEG2370-4019* 10/60 1 137MEG2370-4044* 10/60 1 137MEG2370-4060* 10/60 1.2 137MEG2370-4146* 10/60 1.2 137MEG2372-0302* 10/60 1 29MEG2372-0304* 10/60 1 29MEG2372-0306* 10/60 1 29MEG2372-4002* 10/60 1 147MEG2372-4004* 10/60 1 147MEG2372-4006* 10/60 1 147MEG2400-0319* 10/60 1 23MEG2400-0325* 10/60 1 23MEG2400-0344* 10/60 1 23MEG2400-0414* 10/60 1.1 23MEG2400-0419* 10/60 1 23MEG2400-0444* 10/60 1 23MEG2400-0460* 10/60 1.1 23MEG2400-4019* 10/60 1 143MEG2400-4044* 10/60 1 143MEG2400-4060* 10/60 1.2 143MEG2400-4143* 10/60 1.4 143MEG2400-4146* 10/60 1.2 143MEG2401-0319* 10/60 1 22MEG2401-0325* 10/60 1 22MEG2401-0344* 10/60 1 22MEG2401-0414* 10/60 1.1 22MEG2401-0419* 10/60 1 22MEG2401-0444* 10/60 1 22MEG2401-0460* 10/60 1.1 22MEG2401-0619* 10/60 1 22MEG2401-0644* 10/60 1 22MEG2401-1019* 10/60 1.8 96MEG2401-1025* 10/60 1 96MEG2401-1044* 10/60 1.8 96MEG2401-1219* 10/60 1.8 101MEG2401-1225* 10/60 1 101MEG2401-1244* 10/60 1.8 101MEG2401-1419* 10/60 1.8 111MEG2401-1425* 10/60 1 111MEG2401-1444* 10/60 1.8 111MEG2401-1519* 10/60 1.8 111MEG2401-1544* 10/60 1.8 111MEG2401-1619* 10/60 1.8 111MEG2401-1644* 10/60 1.8 111MEG2401-4019* 10/60 1 142

MEG2401-4060* 10/60 1.2 142MEG2401-4143* 10/60 1.4 142MEG2401-4146* 10/60 1.2 142MEG2401-4219* 10/60 1 142MEG2401-4244* 10/60 1 142MEG2402-0319* 10/60 1 23MEG2402-0325* 10/60 1 23MEG2402-0344* 10/60 1 23MEG2402-0414* 10/60 1.1 23MEG2402-0419* 10/60 1 23MEG2402-0444* 10/60 1 23MEG2402-0460* 10/60 1.1 23MEG2402-4019* 10/60 1 143MEG2402-4044* 10/60 1 143MEG2402-4060* 10/60 1.2 143MEG2402-4146* 10/60 1.2 143MEG2414-0319* 1/50 2.1 24MEG2414-0325* 1/50 2.1 24MEG2414-0344* 1/50 2.1 24MEG2414-0414* 1/50 2.1 24MEG2414-0419* 1/50 2.1 24MEG2414-0444* 1/50 2.1 24MEG2414-0460* 1/50 2.1 24MEG2414-4019* 1/50 2.1 144, 156MEG2414-4044* 1/50 2.1 144, 156MEG2414-4060* 1/50 2.1 144, 156MEG2414-4146* 1/50 2.1 144, 156MEG2500-0319* 10/60 1 30MEG2500-0325* 10/60 1 30MEG2500-0344* 10/60 1 30MEG2500-0414* 10/60 1.1 30MEG2500-0419* 10/60 1 30MEG2500-0444* 10/60 1 30MEG2500-0460* 10/60 1.1 30MEG2500-4019* 10/60 1 148MEG2500-4044* 10/60 1 148MEG2500-4060* 10/60 1.2 148MEG2500-4143* 10/60 1.4 148MEG2500-4146* 10/60 1.2 148MEG2504-0319* 1/50 8 31MEG2504-0325* 1/50 8 31MEG2504-0344* 1/50 8 31MEG2504-0414* 1/50 8 31MEG2504-0419* 1/50 8 31MEG2504-0444* 1/50 8 31MEG2504-0460* 1/50 8 31MEG2510-0319* 10/60 1 32MEG2510-0325* 10/60 1 32MEG2510-0344* 10/60 1 32MEG2510-0414* 10/60 1.1 32MEG2510-0419* 10/60 1 32MEG2510-0444* 10/60 1 32MEG2510-0460* 10/60 1.1 32MEG2510-4019* 10/60 1 149MEG2510-4044* 10/60 1 149MEG2510-4060* 10/60 1.2 149MEG2510-4143* 10/60 1.4 149MEG2510-4146* 10/60 1.2 149MEG2514-0319* 1/50 2.1 32, 44MEG2514-0325* 1/50 2.1 32, 44MEG2514-0344* 1/50 2.1 32, 44MEG2514-0414* 1/50 2.1 32, 44MEG2514-0419* 1/50 2.1 32, 44MEG2514-0444* 1/50 2.1 32, 44MEG2514-0460* 1/50 2.1 32, 44MEG2514-4019* 1/50 2.1 150MEG2514-4044* 1/50 2.1 150MEG2514-4060* 1/50 2.1 150MEG2514-4146* 1/50 2.1 150MEG2533-0319* 1/60 1 37MEG2533-0325* 1/60 1 37MEG2533-0344* 1/60 1 37MEG2533-0414* 1/60 1.1 37MEG2533-0419* 1/60 1 37MEG2533-0444* 1/60 1 37MEG2533-0460* 1/60 1.1 37MEG2534-0319* 1/60 8 37MEG2534-0325* 1/60 8 37MEG2534-0344* 1/60 8 37


ww

ww

.mer

ten.

com





MEG2534-0414* 1/60 8 37MEG2534-0419* 1/60 8 37MEG2534-0444* 1/60 8 37MEG2534-0460* 1/60 8 37MEG2535-0319* 1/60 8 37MEG2535-0325* 1/60 8 37MEG2535-0344* 1/60 8 37MEG2535-0414* 1/60 8 37MEG2535-0419* 1/60 8 37MEG2535-0444* 1/60 8 37MEG2535-0460* 1/60 8 37MEG2600-0319* 10/60 1 31MEG2600-0325* 10/60 1 31MEG2600-0344* 10/60 1 31MEG2600-0414* 10/60 1.1 31MEG2600-0419* 10/60 1 31MEG2600-0444* 10/60 1 31MEG2600-0460* 10/60 1.1 31MEG2600-4015* 10/60 1.2 148MEG2600-4019* 10/60 1 148MEG2600-4029* 10/60 1.2 148MEG2600-4044* 10/60 1 148MEG2600-4060* 10/60 1.2 148MEG2600-4069* 10/60 1.2 148MEG2600-4143* 10/60 1.4 148MEG2600-4146* 10/60 1.2 148MEG2610-0319* 10/60 1 32MEG2610-0325* 10/60 1 32MEG2610-0344* 10/60 1 32MEG2610-0414* 10/60 1.1 32MEG2610-0419* 10/60 1 32MEG2610-0444* 10/60 1 32MEG2610-0460* 10/60 1.1 32MEG2610-4019* 10/60 1 149MEG2610-4044* 10/60 1 149MEG2610-4060* 10/60 1.2 149MEG2610-4143* 10/60 1.4 149MEG2610-4146* 10/60 1.2 149MEG2612-0302* 10/60 1 33MEG2612-0304* 10/60 1 33MEG2612-0306* 10/60 1 33MEG2612-4002* 10/60 1 150MEG2612-4004* 10/60 1 150MEG2612-4006* 10/60 1 150MEG2612-7214* 10/60 2.1 237MEG2612-7215* 10/60 2.1 237MEG2612-7219* 10/60 2.1 237MEG2612-7244* 10/60 2.1 237MEG2612-7260* 10/60 2.1 237MEG2614-0319* 1/50 2.1 33MEG2614-0325* 1/50 2.1 33MEG2614-0344* 1/50 2.1 33MEG2614-0414* 1/50 2.1 33MEG2614-0419* 1/50 2.1 33MEG2614-0444* 1/50 2.1 33MEG2614-0460* 1/50 2.1 33MEG2614-4019* 1/50 2.1 150, 157MEG2614-4044* 1/50 2.1 150, 157MEG2614-4060* 1/50 2.1 150, 157MEG2614-4146* 1/50 2.1 150, 157MEG3050-0000* 10/60 1 308, 364MEG3055-0000* 10/60 1 308MEG3056-0000* 10/60 1 308, 364MEG3059-0000* 10/60 1 308, 364MEG3101-0000 10/60 1 307MEG3102-0000* 10/60 1 307MEG3105-0000* 10/60 1 307MEG3106-0000* 10/60 1 306MEG3111-0000 10/60 1 305MEG3112-0000* 10/60 1 306MEG3114-0000 10/60 1 307MEG3115-0000* 10/60 1 305MEG3116-0000* 10/60 1.8 305MEG3117-0000* 10/60 1 305MEG3125-0000* 10/60 1 306MEG3126-0000* 10/60 1 306MEG3128-0000* 10/60 1 306, 309MEG3135-0000* 10/60 1 307MEG3136-0000* 10/60 1 306

MEG3137-0000* 10/60 1 307MEG3150-0000* 10/60 1.8 308, 364MEG3151-0000* 10/60 1 309MEG3153-0000* 10/60 1 308MEG3154-0000* 10/60 1 308MEG3155-0000* 10/60 1 308MEG3156-0000* 10/60 1 308, 364MEG3159-0000* 10/60 1 308, 364MEG3160-0000* 10/60 1 309MEG3165-0000* 10/60 1 309MEG3182-0000* 10/60 1 310MEG3184-0000* 10/60 1 310MEG3186-0000* 10/60 1 309MEG3300-0306* 10/240 1 38MEG3302-0319* 5/225 1 39MEG3302-0325* 5/225 1 39MEG3302-0344* 5/225 1 39MEG3302-0414* 5/225 1.1 39MEG3302-0419* 5/225 1 39MEG3302-0444* 5/225 1 39MEG3302-0460* 5/225 1.1 39MEG3303-0319* 10/240 1 39MEG3303-0325* 10/240 1 39MEG3303-0344* 10/240 1 39MEG3303-0414* 10/240 1.1 39MEG3303-0419* 10/240 1 39MEG3303-0444* 10/240 1 39MEG3303-0460* 10/240 1.1 39MEG3305-0319* 5/225 1 39MEG3305-0325* 5/225 1 39MEG3305-0344* 5/225 1 39MEG3305-0414* 5/225 1.1 39MEG3305-0419* 5/225 1 39MEG3305-0444* 5/225 1 39MEG3305-0460* 5/225 1.1 39MEG3307-0319* 5/225 1 42MEG3307-0325* 5/225 1 42MEG3307-0344* 5/225 1 42MEG3307-0414* 5/225 1.1 42MEG3307-0419* 5/225 1 42MEG3307-0444* 5/225 1 42MEG3307-0460* 5/225 1.1 42MEG3327-0414* 5/225 1.1 43MEG3327-0460* 5/225 1.1 43MEG3341-1406* 1/6 1 45, 108MEG3341-1419* 1/6 1 45, 108MEG3365-0319* 10/240 1 39MEG3365-0325* 10/240 1 39MEG3365-0344* 10/240 1 39MEG3365-0414* 10/240 1.1 39MEG3365-0419* 10/240 1 39MEG3365-0444* 10/240 1 39MEG3365-0460* 10/240 1.1 39MEG3370-0302* 5/225 1 41MEG3370-0304* 5/225 1 41MEG3370-0306* 5/225 1 41MEG3370-0307* 5/225 1 41MEG3380-0319* 5/225 1 45MEG3380-0325* 5/225 1 45MEG3380-0344* 5/225 1 45MEG3380-0414* 5/225 1.1 45MEG3380-0419* 5/225 1 45MEG3380-0444* 5/225 1 45MEG3380-0460* 5/225 1.1 45MEG3420-0319* 5/120 1 41MEG3420-0325* 5/120 1 41MEG3420-0344* 5/120 1 41MEG3420-0414* 5/120 1.1 41MEG3420-0419* 5/120 1 41MEG3420-0444* 5/120 1 41MEG3420-0460* 5/120 1.1 41MEG3424-0319* 1/60 1 41, 44MEG3424-0325* 1/60 1 41, 44MEG3424-0344* 1/60 1 41, 44MEG3424-0414* 1/60 1.1 41, 44MEG3424-0419* 1/60 1 41, 44MEG3424-0444* 1/60 1 41, 44MEG3424-0460* 1/60 1.1 41, 44MEG3429-0319* 5/120 1 43, 67


ww

ww

.mer

ten.

com





MEG3429-0325* 5/120 1 43, 67MEG3429-0344* 5/120 1 43, 67MEG3429-0414* 5/120 1.1 43, 67MEG3429-0419* 5/120 1 43, 67MEG3429-0444* 5/120 1 43, 67MEG3429-0460* 5/120 1.1 43, 67MEG3456-0319* 5/120 1 41MEG3456-0325* 5/120 1 41MEG3456-0344* 5/120 1 41MEG3456-0414* 5/120 1.1 41MEG3456-0419* 5/120 1 41MEG3456-0444* 5/120 1 41MEG3456-0460* 5/120 1.1 41MEG3501-0000 10/60 1 307MEG3502-0000* 10/60 1 307MEG3506-0000* 10/60 1 306MEG3515-0000* 10/60 1 305MEG3516-0000* 10/60 1 305MEG3517-0000* 10/60 1 305MEG3526-0000* 10/60 1 306MEG3535-0000* 10/60 1 307MEG3536-0000* 10/60 1 306MEG3560-0000* 10/60 1 309MEG3601-0000 10/60 1 307MEG3602-0000* 10/60 1 307MEG3605-0000* 10/60 1 307MEG3606-0000* 10/60 1 306MEG3612-0000* 10/60 1 306MEG3615-0000* 10/60 1 305MEG3616-0000* 10/60 1 305MEG3617-0000* 10/60 1 305MEG3626-0000* 10/60 1 306MEG3635-0000* 10/60 1 307MEG3636-0000* 10/60 1 306MEG3637-0000* 10/60 1 307MEG3714-0000* 10/60 1 317MEG3715-0000* 10/60 1 317MEG3754-0000* 10/60 1 309MEG3755-0000* 10/60 1 317MEG3760-0000* 10/60 1 309MEG3900-0000* 1/60 1 327MEG3901-0000* 1/150 1 325MEG3901-0006* 1/150 1 325MEG3902-0000* 1/150 1 325MEG3921-0000* 1/150 1 325MEG3922-0000* 1/150 1 325MEG3942-0000* 1/150 1 325MEG3985-0001* 1/48 8 248, 310, 318MEG3985-0003* 1/48 8 248, 310, 318MEG4010-2844* 10/180 1 126MEG4010-2944* 10/180 1 126MEG4014-1425* 1/40 1 108, 272MEG4020-2844* 10/90 1 126MEG4020-2944* 10/90 1 126MEG4024-1425* 1/20 1 108, 272MEG4030-2844* 10/60 1 126MEG4030-2944* 10/60 1 126MEG4034-1425* 1/15 1 108, 273MEG4122-0319* 1/150 1 81MEG4122-0325* 1/150 1 81MEG4122-0344* 1/150 1 81MEG4122-0414* 1/150 1.1 81MEG4122-0419* 1/150 1 81MEG4122-0444* 1/150 1 81MEG4122-0460* 1/150 1.1 81MEG4211-0319* 5/225 1 75MEG4211-0325* 5/225 1 75MEG4211-0344* 5/225 1 75MEG4211-0414* 5/225 1.1 75MEG4211-0419* 5/225 1 75MEG4211-0444* 5/225 1 75MEG4211-0460* 5/225 1.1 75MEG4214-0000* 5/120 1 75MEG4216-0000* 5/120 1 75MEG4350-0319* 1/60 1 82MEG4350-0325* 1/60 1 82MEG4350-0344* 1/60 1 82MEG4350-0414* 1/60 1.1 82MEG4350-0419* 1/60 1 82

MEG4350-0444* 1/60 1 82MEG4350-0460* 1/60 1.1 82MEG4351-0319* 1/60 1 82MEG4351-0325* 1/60 1 82MEG4351-0344* 1/60 1 82MEG4351-0414* 1/60 1.1 82MEG4351-0419* 1/60 1 82MEG4351-0444* 1/60 1 82MEG4351-0460* 1/60 1.1 82MEG4353-0319* 1/60 1 83MEG4353-0325* 1/60 1 83MEG4353-0344* 1/60 1 83MEG4353-0414* 1/60 1.1 83MEG4353-0419* 1/60 1 83MEG4353-0444* 1/60 1 83MEG4353-0460* 1/60 1.1 83MEG4420-0000* 1/50 8 65MEG4420-0319* 1/100 1 65MEG4420-0325* 1/100 1 65MEG4420-0344* 1/100 1 65MEG4420-0414* 1/100 1.1 65MEG4420-0419* 1/100 1 65MEG4420-0444* 1/100 1 65MEG4420-0460* 1/100 1.1 65MEG4449-0319* 1/150 1 68MEG4449-0325* 1/150 1 68MEG4449-0344* 1/150 1 68MEG4450-0000* 1/50 8 65MEG4450-0319* 1/100 1 64MEG4450-0325* 1/100 1 64MEG4450-0344* 1/100 1 64MEG4450-0414* 1/100 1.1 64MEG4450-0419* 1/100 1 64MEG4450-0444* 1/100 1 64MEG4450-0460* 1/100 1.1 64MEG4451-0000* 1/50 8 65MEG4528-0414* 5/225 1.1 80MEG4528-0460* 5/225 1.1 80MEG4541-0319* 5/150 1 79, 427MEG4541-0325* 5/150 1 79, 427MEG4541-0344* 5/150 1 79, 427MEG4541-0414* 5/150 1.1 79, 427MEG4541-0419* 5/150 1 79, 427MEG4541-0444* 5/150 1 79, 427MEG4541-0460* 5/150 1.1 79, 427MEG4542-0319* 5/150 1 79, 427MEG4542-0325* 5/150 1 79, 427MEG4542-0344* 5/150 1 79, 427MEG4542-0414* 5/150 1.1 79, 427MEG4542-0419* 5/150 1 79, 427MEG4542-0444* 5/150 1 79, 427MEG4542-0460* 5/150 1.1 79, 427MEG4840-0319 1/100 1 84MEG4840-0325 1/100 1 84MEG4841-0319 1/100 1 84MEG4841-0325 1/100 1 84MEG4842-0319 1/100 1 84MEG4842-0325 1/100 1 84MEG4843-0319 1/150 1 84MEG4843-0325 1/150 1 84MEG4844-0319 1/150 1 84MEG4844-0325 1/150 1 84MEG4846-0319 1/50 8 84MEG4846-0325 1/50 8 84MEG4847-0319 1/50 8 84MEG4847-0325 1/50 8 84MEG5091-0319 1/40 8 461MEG5091-0325 1/40 8 461MEG5091-0344 1/40 8 461MEG5092-0319 1/40 8 462MEG5092-0325 1/40 8 462MEG5092-0344 1/40 8 462MEG5131-0000* 1/72 8 314, 349MEG5132-0000* 1/72 8 315, 349MEG5133-0000* 1/72 8 315, 349MEG5135-0000* 1/72 8 315, 349MEG5136-0000* 1/72 8 316, 349MEG5137-0000* 1/72 8 316, 349MEG5138-0000* 1/72 8 314, 348


ww

ww

.mer

ten.

com





MEG5139-0000* 1/72 8 314, 348MEG5142-0000* 1/72 8 316, 350MEG5209-0319* 1/100 1 67MEG5209-0325* 1/100 1 67MEG5209-0344* 1/100 1 67MEG5250-0319* 5/120 8 51, 350MEG5250-0325* 5/120 8 51, 350MEG5250-0344* 5/120 8 51, 350MEG5250-0414* 5/120 8 51, 350MEG5250-0419* 5/120 8 51, 350MEG5250-0444* 5/120 8 51, 350MEG5250-0460* 5/120 8 51, 350MEG5250-0619* 5/120 8 51, 350MEG5250-0644* 5/120 8 51, 350MEG5250-4015* 5/120 8 162, 350MEG5250-4019* 10/120 8 162, 350MEG5250-4029* 5/120 8 162, 350MEG5250-4060* 5/120 8 162, 350MEG5250-4069* 5/120 8 162, 350MEG5250-4143* 5/120 8 162, 350MEG5250-4146* 5/120 8 162, 350MEG5250-4219* 5/120 8 162, 350MEG5250-4244* 5/120 8 162, 350MEG6164-4600* 1/40 9 207, 455MEG6212-0319* 1/50 9 58, 445, 456MEG6212-0325* 1/50 9 58, 445, 456MEG6212-0344* 1/50 9 58, 445, 456MEG6212-0414* 1/50 9 58, 445, 456MEG6212-0419* 1/50 9 58, 445, 456MEG6212-0444* 1/50 9 58, 445, 456MEG6212-0460* 1/50 9 58, 445, 456MEG6212-4019* 1/50 9 167, 451, 459MEG6212-4044* 1/50 9 167, 451, 459MEG6212-4060* 1/50 9 167, 451, 459MEG6212-4146* 1/50 9 167, 451, 459MEG6214-0319* 1/35 9 59, 446, 456MEG6214-0325* 1/35 9 59, 446, 456MEG6214-0344* 1/35 9 59, 446, 456MEG6214-0414* 1/35 9 59, 446, 456MEG6214-0419* 1/35 9 59, 446, 456MEG6214-0444* 1/35 9 59, 446, 456MEG6214-0460* 1/35 9 59, 446, 456MEG6214-4019* 1/35 9 168, 452, 459MEG6214-4044* 1/35 9 168, 452, 459MEG6214-4060* 1/35 9 168, 452, 459MEG6214-4146* 1/35 9 168, 452, 459MEG6221-0319 1/50 9 63, 457MEG6221-0325 1/50 9 63, 457MEG6221-0344 1/50 9 63, 457MEG6221-0414 1/50 9 63, 457MEG6221-0419 1/50 9 63, 457MEG6221-0444 1/50 9 63, 457MEG6221-0460 1/50 9 63, 457MEG6241-0319 1/50 9 62, 457MEG6241-0325 1/50 9 62, 457MEG6241-0344 1/50 9 62, 457MEG6241-0414 1/50 9 62, 457MEG6241-0419 1/50 9 62, 457MEG6241-0444 1/50 9 62, 457MEG6241-0460 1/50 9 62, 457MEG6241-4019 1/50 9 171, 460MEG6241-4044 1/50 9 171, 460MEG6241-4060 1/50 9 171, 460MEG6241-4146 1/50 9 171, 460MEG6250-0319* 1/40 9 62, 479, 504MEG6250-0325* 1/40 9 62, 479, 504MEG6250-0344* 1/40 9 62, 479, 504MEG6250-0414* 1/40 9 62, 479, 504MEG6250-0419* 1/40 9 62, 479, 504MEG6250-0444* 1/40 9 62, 479, 504MEG6250-0460* 1/40 9 62, 479, 504MEG6250-4019* 1/40 9 170, 480, 504MEG6250-4044* 1/40 9 170, 480, 504MEG6250-4060* 1/40 9 170, 480, 504MEG6250-4146* 1/40 9 170, 480, 504MEG6260-0007 1/3 9 476, 501MEG6270-0001 1/4 9 477, 502MEG6270-0002 1/4 9 477, 502MEG6270-0019 1/10 9 477, 502

MEG6270-0022 1/10 9 477, 502MEG6270-0119 1/10 9 477, 501MEG6270-0122 1/10 9 477, 501MEG6270-0219 10/60 9 477, 502MEG6270-0222 10/60 9 477, 502MEG6270-3619 1/10 9 477, 501MEG6270-3714 1/10 9 477, 501MEG6270-3719 1/10 9 477, 501MEG6270-3721 1/10 9 477, 501MEG6270-3722 1/10 9 477, 501MEG6270-3760 1/10 9 477, 501

OVERVIEW OF REPLACEMENTARTICLES

ww

w.m

erte

n.co

m


540 OVERVIEW OF REPLACEMENTARTICLES |©2010

Discontinue Replacement Description PU PG Page

discontinue replacement description PU PG Page?214219 MEG2001-0319 Socket-outlet without earthing contact, polar white, glossy, System M 10/60 1 34214225 MEG2001-0325 Socket-outlet without earthing contact, active white, glossy, System M 10/60 1 34214244 MEG2001-0344 Socket-outlet without earthing contact, white, glossy, System M 10/60 1 34214414 MEG2001-0414 Socket-outlet without earthing contact, anthracite, System M 10/60 1.1 34214419 MEG2001-0419 Socket-outlet without earthing contact, polar white, System M 10/60 1 34214444 MEG2001-0444 Socket-outlet without earthing contact, white, System M 10/60 1 34214460 MEG2001-0460 Socket-outlet without earthing contact, aluminium, System M 10/60 1.1 34214519 MEG2000-4019 Socket-outlet without earthing contact, polar white, System Design 10/60 1 151214543 MEG2000-4143 Socket-outlet without earthing contact, antique brass, System Design 10/60 1.4 151214546 MEG2000-4146 Socket-outlet without earthing contact, stainless steel, System Design 10/60 1.2 151214560 MEG2000-4060 Socket-outlet without earthing contact, aluminium, System Design 10/60 1.2 151214594 MEG2000-4044 Socket-outlet without earthing contact, white, System Design 10/60 1 151214599 MEG2000-4019 Socket-outlet without earthing contact, polar white, System Design 10/60 1 151215219 MEG2000-0319 Socket-outlet without earthing contact, polar white, glossy, System M 10/60 1 34215225 MEG2000-0325 Socket-outlet without earthing contact, active white, glossy, System M 10/60 1 34215244 MEG2000-0344 Socket-outlet without earthing contact, white, glossy, System M 10/60 1 34215414 MEG2000-0414 Socket-outlet without earthing contact, anthracite, System M 10/60 1.1 34215419 MEG2000-0419 Socket-outlet without earthing contact, polar white, System M 10/60 1 34215444 MEG2000-0444 Socket-outlet without earthing contact, white, System M 10/60 1 34215460 MEG2000-0460 Socket-outlet without earthing contact, aluminium, System M 10/60 1.1 34230119 MEG2301-1519 SCHUKO socket-outlet with complete cover plate, polar white, M-SMART 10/60 1.8 109230144 MEG2301-1544 SCHUKO socket-outlet with complete cover plate, white, M-SMART 10/60 1.8 109230519 MEG2301-1619 SCHUKO socket-outlet with complete cover plate, polar white, M-SMART 10/60 1.8 109230544 MEG2301-1644 SCHUKO socket-outlet with complete cover plate, white, M-SMART 10/60 1.8 109230802 MEG2302-4002 SCHUKO sckt-outlts f.spec.circ. w.label.field, or, Sys.Des. 10/60 1 145230804 MEG2302-4004 SCHUKO sckt-outlts f.spec.circ. w.label.field, green, Sys.Des. 10/60 1 145230806 MEG2302-4006 SCHUKO sckt-outlts for special circuits with labelling field, rby rd, Sys.Des. 10/60 1 145230819 MEG2302-4019 SCHUKO socket-outlet with labelling field, polar white, System Design 10/60 1 137230844 MEG2302-4044 SCHUKO socket-outlet with labelling field, white, System Design 10/60 1 137230846 MEG2302-4146 SCHUKO socket-outlet with labelling field, stainless steel, System Design 10/60 1.2 137230860 MEG2302-4060 SCHUKO socket-outlet with labelling field, aluminium, System Design 10/60 1.2 137230914 MEG2302-0414 SCHUKO socket-outlet with labelling field, anthracite, System M 10/60 1.1 14230919 MEG2302-0419 SCHUKO socket-outlet with labelling field, polar white, System M 10/60 1 14230944 MEG2302-0444 SCHUKO socket-outlet with labelling field, white, System M 10/60 1 14230960 MEG2302-0460 SCHUKO socket-outlet with labelling field, aluminium, System M 10/60 1.1 14231319 MEG2328-1519 SCHUKO double socket-outlet, polar white, M-SMART 2/30 1 110231344 MEG2328-1544 SCHUKO double socket-outlet, white, M-SMART 2/30 1 110233014 MEG2310-7214 SCHUKO socket-outlet with hinged lid, anthracite, AQUADESIGN 10/60 2.1 234233015 MEG2310-7215 SCHUKO socket-outlet with hinged lid, dark brazil, AQUADESIGN 10/60 2.1 234233019 MEG2310-7219 SCHUKO socket-outlet with hinged lid, polar white, AQUADESIGN 10/60 2.1 234233044 MEG2310-7244 SCHUKO socket-outlet with hinged lid, white, AQUADESIGN 10/60 2.1 234233060 MEG2310-7260 SCHUKO socket-outlet with hinged lid, aluminium, AQUADESIGN 10/60 2.1 234233114 MEG2312-7214 SCHUKO socket-outlet with hinged lid and labelling field, anthracite, AQUADESIGN 10/60 2.1 234233119 MEG2312-7219 SCHUKO socket-outlet with hngd lid and labelling field, polar white, AQUADESIGN 10/60 2.1 234233144 MEG2312-7244 SCHUKO socket-outlet with hinged lid and labelling field, white, AQUADESIGN 10/60 2.1 234233160 MEG2312-7260 SCHUKO socket-outlet with hinged lid and labelling field, aluminium, AQUADESIGN 10/60 2.1 234233314 MEG2316-7214 SCHUKO sckt-outlt with hngd lid& label.field,lockable with various locks,anthr. AQ.DES. 1/30 2.1 235233315 MEG2316-7215 SCHUKO sckt-outlt with hngd lid& label.field,lockable with various locks, dk brazil, AQ.DES. 1/30 2.1 235233319 MEG2316-7219 SCHUKO sckt-outlt with hngd lid& label.field,lockable with various locks,pol.wht. AQ.DES. 1/30 2.1 235233344 MEG2316-7244 SCHUKO sckt-outlt with hngd lid& label.field,lockable with various locks,wht, AQ.DES. 1/30 2.1 235233360 MEG2316-7260 SCHUKO sckt-outlt with hngd lid& label.field,lockable with various locks,alum. AQ.DES. 1/30 2.1 235233402 MEG2300-0302 SCHUKO sckt-outlts f. spec.circ. With addit. safety pow.supply marking, or,Sys.M 10/60 1 26233404 MEG2300-0304 SCHUKO sckt-outlts for special circuits, With power supply marking, green, Sys.M 10/60 1 26233406 MEG2300-0306 SCHUKO socket-outlets for special circuits, ruby red, System M 10/60 1 26233419 MEG2301-0319 SCHUKO socket-outlet, polar white, glossy, System M 10/60 1.8 12233425 MEG2301-0325 SCHUKO socket-outlet, active white, glossy, System M 10/60 1 12233444 MEG2301-0344 SCHUKO socket-outlet, white, glossy, System M 10/60 1.8 12233514 MEG2300-7214 SCHUKO socket-outlet, anthracite, AQUADESIGN 10/60 2.1 236233515 MEG2300-7215 SCHUKO socket-outlet, dark brazil, AQUADESIGN 10/60 2.1 236233519 MEG2300-7219 SCHUKO socket-outlet, polar white, AQUADESIGN 10/60 2.1 236233544 MEG2300-7244 SCHUKO socket-outlet, white, AQUADESIGN 10/60 2.1 236233560 MEG2300-7260 SCHUKO socket-outlet, aluminium, AQUADESIGN 10/60 2.1 236233619 MEG2328-1419 SCHUKO double socket-outlet, polar white, glossy, M-SMART 2/30 1 110233625 MEG2328-1425 SCHUKO double socket-outlet, active white, glossy, M-SMART 2/30 1 110233644 MEG2328-1444 SCHUKO double socket-outlet, white, glossy, M-SMART 2/30 1 110235019 MEG2300-0319 SCHUKO socket-outlet, polar white, glossy, System M 10/60 1 12235025 MEG2300-0325 SCHUKO socket-outlet, active white, glossy, System M 10/60 1 12235044 MEG2300-0344 SCHUKO socket-outlet, white, glossy, System M 10/60 1 12235119 MEG2301-0619 SCHUKO socket-outlet, polar white, System M 10/60 1.8 12235144 MEG2301-0644 SCHUKO socket-outlet, white, System M 10/60 1.8 12235214 MEG2317-7214 SCHUKO sckt-outlt with hngd lid& label.field,lockable w. identical locks,anthr. AQ.DES. 1/30 2.1 235235219 MEG2317-7219 SCHUKO sckt-outlt with hngd lid& label.field,lockable w. identical locks,pol.wht. AQ.DES. 1/30 2.1 235235244 MEG2317-7244 SCHUKO sckt-outlt with hngd lid& label.field,lockable w. identical locks,wht, AQ.DES. 1/30 2.1 235235260 MEG2317-7260 SCHUKO sckt-outlt with hngd lid& label.field,lockable w. identical locks,alum. AQ.DES. 1/30 2.1 235235314 MEG2318-7214 SCHUKO sckt-outlt with hngd lid& label.field,lockable w. two identical locks,anthr. AQ.DES. 1/15 2.1 236235319 MEG2318-7219 SCHUKO sckt-outlt with hngd lid& label.field,lockable w. two identical locks,pol.wht. AQ.DES.1/15 2.1 236235344 MEG2318-7244 SCHUKO sckt-outlt with hngd lid& label.field,lockable w. two identical locks,wht, AQ.DES. 1/15 2.1 236235360 MEG2318-7260 SCHUKO sckt-outlt with hngd lid& label.field,lockable w. two identical locks,alum. AQ.DES. 1/15 2.1 236


ww

w.m

erte

n.co

m


©2010 | OVERVIEW OF REPLACEMENTARTICLES 541


235419 MEG2310-0619 SCHUKO socket-outlet with hinged lid, polar white, System M 10/60 1 15235444 MEG2310-0644 SCHUKO socket-outlet with hinged lid, white, System M 10/60 1 15236614 MEG2314-0414 SCHUKO socket-outlet with hinged lid, IP44, anthracite, System M 1/50 2.1 16,44236619 MEG2314-0419 SCHUKO socket-outlet with hinged lid, IP44, polar white, System M 1/50 2.1 16,44236644 MEG2314-0444 SCHUKO socket-outlet with hinged lid, IP44, white, System M 1/50 2.1 16,44236660 MEG2314-0460 SCHUKO socket-outlet with hinged lid, IP44, aluminium, System M 1/50 2.1 16,44237019 MEG2314-4019 SCHUKO socket-outlet with hinged lid, IP44, polar white, System Design 1/50 2.1 139,156237046 MEG2314-4146 SCHUKO socket-outlet with hinged lid, IP44, stainless steel, System Design 1/50 2.1 139,156237060 MEG2314-4060 SCHUKO socket-outlet with hinged lid, IP44, aluminium, System Design 1/50 2.1 139,156237094 MEG2314-4044 SCHUKO socket-outlet with hinged lid, IP44, white, System Design 1/50 2.1 139,156237114 MEG2301-0414 SCHUKO socket-outlet, anthracite, System M 10/60 1.1 12237119 MEG2301-0419 SCHUKO socket-outlet, polar white, System M 10/60 1.8 12237144 MEG2301-0444 SCHUKO socket-outlet, white, System M 10/60 1.8 12237160 MEG2301-0460 SCHUKO socket-outlet, aluminium, System M 10/60 1.1 12237219 MEG2311-4019 SCHUKO socket-outlet with hinged lid, polar white, System Design 10/60 1 138237243 MEG2311-4143 SCHUKO socket-outlet with hinged lid, antique brass, System Design 10/60 1.4 138237246 MEG2311-4146 SCHUKO socket-outlet with hinged lid, stainless steel, System Design 10/60 1.2 138237260 MEG2311-4060 SCHUKO socket-outlet with hinged lid, aluminium, System Design 10/60 1.2 138237294 MEG2311-4244 SCHUKO socket-outlet with hinged lid, white, System Design 10/60 1 138237299 MEG2311-4219 SCHUKO socket-outlet with hinged lid, polar white, System Design 10/60 1 138237314 MEG2300-0414 SCHUKO socket-outlet, anthracite, System M 10/60 1.1 12237319 MEG2300-0419 SCHUKO socket-outlet, polar white, System M 10/60 1 12237344 MEG2300-0444 SCHUKO socket-outlet, white, System M 10/60 1 12237360 MEG2300-0460 SCHUKO socket-outlet, aluminium, System M 10/60 1.1 12237414 MEG2310-0414 SCHUKO socket-outlet with hinged lid, anthracite, System M 10/60 1.1 15237419 MEG2310-0419 SCHUKO socket-outlet with hinged lid, polar white, System M 10/60 1 15237444 MEG2310-0444 SCHUKO socket-outlet with hinged lid, white, System M 10/60 1 15237460 MEG2310-0460 SCHUKO socket-outlet with hinged lid, aluminium, System M 10/60 1.1 15237502 MEG2300-4002 SCHUKO sckt-outlts f.spec.circ. With addit.safety pow.supply marking, or,Sys.Des. 10/60 1 145237504 MEG2300-4004 SCHUKO sckt-outlts f. spec. circ., With power supply marking, green, Sys.Des. 10/60 1 145237506 MEG2300-4006 SCHUKO socket-outlets for special circuits, ruby red, System Design 10/60 1 145237519 MEG2301-4019 SCHUKO socket-outlet, polar white, System Design 10/60 1 136237543 MEG2301-4143 SCHUKO socket-outlet, antique brass, System Design 10/60 1.4 136237546 MEG2301-4146 SCHUKO socket-outlet, stainless steel, System Design 10/60 1.2 136237560 MEG2301-4060 SCHUKO socket-outlet, aluminium, System Design 10/60 1.2 136237594 MEG2301-4244 SCHUKO socket-outlet, white, System Design 10/60 1 136237599 MEG2301-4219 SCHUKO socket-outlet, polar white, System Design 10/60 1 136237614 MEG2311-0414 SCHUKO socket-outlet with hinged lid, anthracite, System M 10/60 1.1 15237619 MEG2311-0419 SCHUKO socket-outlet with hinged lid, polar white, System M 10/60 1 15237644 MEG2311-0444 SCHUKO socket-outlet with hinged lid, white, System M 10/60 1 15237660 MEG2311-0460 SCHUKO socket-outlet with hinged lid, aluminium, System M 10/60 1.1 15237715 MEG2300-4015 SCHUKO socket-outlet, dark brazil, System Design 10/60 1.2 136237719 MEG2300-4019 SCHUKO socket-outlet, polar white, System Design 10/60 1 136237729 MEG2300-4029 SCHUKO socket-outlet, light grey, System Design 10/60 1.2 136237743 MEG2300-4143 SCHUKO socket-outlet, antique brass, System Design 10/60 1.4 136237744 MEG2300-4044 SCHUKO socket-outlet, white, System Design 10/60 1 136237746 MEG2300-4146 SCHUKO socket-outlet, stainless steel, System Design 10/60 1.2 136237760 MEG2300-4060 SCHUKO socket-outlet, aluminium, System Design 10/60 1.2 136237769 MEG2300-4069 SCHUKO socket-outlet, black grey, System Design 10/60 1.2 136237815 MEG2310-4015 SCHUKO socket-outlet with hinged lid, dark brazil, System Design 10/60 1.2 139237819 MEG2310-4019 SCHUKO socket-outlet with hinged lid, polar white, System Design 10/60 1 139237829 MEG2310-4029 SCHUKO socket-outlet with hinged lid, light grey, System Design 10/60 1.2 139237843 MEG2310-4143 SCHUKO socket-outlet with hinged lid, antique brass, System Design 10/60 1.4 139237846 MEG2310-4146 SCHUKO socket-outlet with hinged lid, stainless steel, System Design 10/60 1.2 139237860 MEG2310-4060 SCHUKO socket-outlet with hinged lid, aluminium, System Design 10/60 1.2 139237869 MEG2310-4069 SCHUKO socket-outlet with hinged lid, black grey, System Design 10/60 1.2 139237894 MEG2310-4044 SCHUKO socket-outlet with hinged lid, white, System Design 10/60 1 139238219 MEG2311-0319 SCHUKO socket-outlet with hinged lid, polar white, glossy, System M 10/60 1 15238225 MEG2311-0325 SCHUKO socket-outlet with hinged lid, active white, glossy, System M 10/60 1 15238244 MEG2311-0344 SCHUKO socket-outlet with hinged lid, white, glossy, System M 10/60 1 15238319 MEG2310-0319 SCHUKO socket-outlet with hinged lid, polar white, glossy, System M 10/60 1 15238325 MEG2310-0325 SCHUKO socket-outlet with hinged lid, active white, glossy, System M 10/60 1 15238344 MEG2310-0344 SCHUKO socket-outlet with hinged lid, white, glossy, System M 10/60 1 15238419 MEG2314-0319 SCHUKO socket-outlet with hinged lid, IP44, polar white, glossy, System M 1/50 2.1 16,44238425 MEG2314-0325 SCHUKO socket-outlet with hinged lid, IP44, active white, glossy, System M 1/50 2.1 16,44238444 MEG2314-0344 SCHUKO socket-outlet with hinged lid, IP44, white, glossy, System M 1/50 2.1 16,44239219 MEG2301-1419 SCHUKO socket-outlet with complete cover plate, polar white, glossy, M-SMART 10/60 1.8 109239225 MEG2301-1425 SCHUKO socket-outlet with complete cover plate, active white, glossy, M-SMART 10/60 1 109239244 MEG2301-1444 SCHUKO socket-outlet with complete cover plate, white, glossy, M-SMART 10/60 1.8 109239902 MEG2302-0302 SCHUKO sckt-outlts f.spec.circ. w.label.field, or, Sys.M 10/60 1 27239904 MEG2302-0304 SCHUKO sckt-outlts f.spec.circ. w.label.field, green, Sys.M 10/60 1 27239906 MEG2302-0306 SCHUKO socket-outlets for special circuits with labelling field, rby rd, Sys. M 10/60 1 27239919 MEG2302-0319 SCHUKO socket-outlet with labelling field, polar white, glossy, System M 10/60 1 14239925 MEG2302-0325 SCHUKO socket-outlet with labelling field, active white, glossy, System M 10/60 1 14239944 MEG2302-0344 SCHUKO socket-outlet with labelling field, white, glossy, System M 10/60 1 14240802 MEG2303-4002 SCHUKO sckt-outlts f.spec.circ. with ctrl lamp& label.field, or, Sys.Des. 1/50 1 146240804 MEG2303-4004 SCHUKO sckt-outlts f.spec.circ. with ctrl lamp& label.field, green, Sys.Des. 1/50 1 146240806 MEG2303-4006 SCHUKO sckt-outlts f. spec.circ. with ctrl lamp& label.field, rby rd,Sys.Des. 1/50 1 146240819 MEG2303-4019 SCHUKO socket-outlet with ctrl lamp & labelling field, polar white, Sys. Design 1/50 1 138


ww

w.m

erte

n.co

m




240844 MEG2303-4044 SCHUKO socket-outlet with control lamp and labelling field, white, System Design 1/50 1 138240846 MEG2303-4146 SCHUKO socket-outlet with ctrl lamp & labelling field, stainless steel, Sys.Des. 1/50 1.2 138240860 MEG2303-4060 SCHUKO socket-outlet with ctrl lamp & labelling field, aluminium, System Design 1/50 1.2 138240914 MEG2303-0414 SCHUKO socket-outlet with control lamp and labelling field, anthracite, System M 1/50 1.1 14240919 MEG2303-0419 SCHUKO socket-outlet with control lamp & labelling field, polar white, System M 1/50 1 14240944 MEG2303-0444 SCHUKO socket-outlet with control lamp and labelling field, white, System M 1/50 1 14240960 MEG2303-0460 SCHUKO socket-outlet with control lamp and labelling field, aluminium, System M 1/50 1.1 14246319 MEG2328-1019 SCHUKO double socket-outlet, polar white, glossy, 1-M 2/30 1 96246325 MEG2328-1025 SCHUKO double socket-outlet, active white, glossy, 1-M 2/30 1 96246344 MEG2328-1044 SCHUKO double socket-outlet, white, glossy, 1-M 2/30 1 96246819 MEG2328-1219 SCHUKO double socket-outlet, polar white, glossy, ATELIER-M 2/30 1 100246825 MEG2328-1225 SCHUKO double socket-outlet, active white, glossy, ATELIER-M 2/30 1 100246844 MEG2328-1244 SCHUKO double socket-outlet, white, glossy, ATELIER-M 2/30 1 100247019 MEG2301-1219 SCHUKO socket-outlet with complete cover plate, polar white, glossy, ATELIER-M 10/60 1.8 99247025 MEG2301-1225 SCHUKO socket-outlet with complete cover plate, active white, glossy, ATELIER-M 10/60 1 99247044 MEG2301-1244 SCHUKO socket-outlet with complete cover plate, white, glossy, ATELIER-M 10/60 1.8 99247119 MEG2300-1219 SCHUKO socket-outlet with complete cover plate, polar white, glossy, ATELIER-M 10/60 1 100247125 MEG2300-1225 SCHUKO socket-outlet with complete cover plate, active white, glossy, ATELIER-M 10/60 1 100247144 MEG2300-1244 SCHUKO socket-outlet with complete cover plate, white, glossy, ATELIER-M 10/60 1 100247219 MEG2301-1019 SCHUKO socket-outlet with complete cover plate, polar white, glossy, 1-M 10/60 1.8 95247225 MEG2301-1025 SCHUKO socket-outlet with complete cover plate, active white, glossy, 1-M 10/60 1 95247244 MEG2301-1044 SCHUKO socket-outlet with complete cover plate, white, glossy, 1-M 10/60 1.8 95247319 MEG2300-1019 SCHUKO socket-outlet with complete cover plate, polar white, glossy, 1-M 10/60 1 95247325 MEG2300-1025 SCHUKO socket-outlet with complete cover plate, active white, glossy, 1-M 10/60 1 95247344 MEG2300-1044 SCHUKO socket-outlet with complete cover plate, white, glossy, 1-M 10/60 1 95247414 MEG2312-0414 SCHUKO socket-outlet with hinged lid and labelling field, anthracite, System M 10/60 1.1 16247419 MEG2312-0419 SCHUKO socket-outlet with hinged lid and labelling field, polar white, System M 10/60 1 16247444 MEG2312-0444 SCHUKO socket-outlet with hinged lid and labelling field, white, System M 10/60 1 16247460 MEG2312-0460 SCHUKO socket-outlet with hinged lid and labelling field, aluminium, System M 10/60 1.1 16247514 MEG2313-0414 SCHUKO socket-outlet with hngd lid, ctrl lamp & labelling field, anthr., Sys. M 1/50 1.1 17247519 MEG2313-0419 SCHUKO sckt-outlt with hngd lid, ctrl lamp & labelling field, pol.wht., Sys. M 1/50 1 17247544 MEG2313-0444 SCHUKO socket-outlet with hngd lid, ctrl lamp & labelling field, white, System M 1/50 1 17247560 MEG2313-0460 SCHUKO socket-outlet with hngd lid, ctrl lamp & labelling field, alum., Sys. M 1/50 1.1 17247619 MEG2370-4019 SCHUKO socket-outlet 45°, polar white, System Design 10/60 1 137247644 MEG2370-4044 SCHUKO socket-outlet 45°, white, System Design 10/60 1 137247646 MEG2370-4146 SCHUKO socket-outlet 45°, stainless steel, System Design 10/60 1.2 137247660 MEG2370-4060 SCHUKO socket-outlet 45°, aluminium, System Design 10/60 1.2 137247702 MEG2372-4002 SCHUKO sckt-outlts f.spec.circ. 45° w.label.field, or, Sys.Des. 10/60 1 147247704 MEG2372-4004 SCHUKO sckt-outlts f.spec.circ. 45° w.label.field, green, Sys.Des. 10/60 1 147247706 MEG2372-4006 SCHUKO sckt-outlts f. spec. circ. 45° with labelling field, rby rd, Sys.Des. 10/60 1 147247819 MEG2312-4019 SCHUKO socket-outlet with hngd lid & labelling field, polar white, System Design 10/60 1 140247844 MEG2312-4044 SCHUKO socket-outlet with hinged lid and labelling field, white, System Design 10/60 1 140247846 MEG2312-4146 SCHUKO socket-outlet with hngd lid & labelling field, stainless steel, Sys. Des. 10/60 1.2 140247860 MEG2312-4060 SCHUKO socket-outlet with hngd lid and labelling field, aluminium, System Design 10/60 1.2 140247902 MEG2313-4002 SCHUKO sckt-outlts f.spec.circ. with hngd lid, ctrl lamp& label.field, or, Sys.Des. 1/50 1 146247904 MEG2313-4004 SCHUKO sckt-outlts f.spec.circ. with hngd lid, ctrl lamp& label.field, green, Sys.Des. 1/50 1 146247906 MEG2313-4006 SCHUKO sckt-outlts f.spec.circ. with hngd lid, ctrl lamp& label.field, rby rd, Sys.Des. 1/50 1 146247919 MEG2313-4019 SCHUKO sckt-outlt with hngd lid, ctrl lamp & labelling field, pol.wht., Sys.Des. 1/50 1 140247944 MEG2313-4044 SCHUKO socket-outlet with hngd lid, ctrl lamp & labelling field, white, Sys.Des. 1/50 1 140247946 MEG2313-4146 SCHUKO socket-outlet with hngd lid, ctrl lamp & labelling field, ss., Sys.Des. 1/50 1.2 140247960 MEG2313-4060 SCHUKO socket-outlet with hngd lid, ctrl lamp & labelling field, alum., Sys.Des. 1/50 1.2 140248319 MEG2312-0319 SCHUKO socket-outlet with hngd lid & labelling field, pol. wht., glossy, Sys. M 10/60 1 16248325 MEG2312-0325 SCHUKO socket-outlet with hngd lid & labelling field, active wht, glossy, Sys. M 10/60 1 16248344 MEG2312-0344 SCHUKO socket-outlet with hngd lid and labelling field, white, glossy, System M 10/60 1 16248402 MEG2313-0302 SCHUKO sckt-outlts f.spec.circ. with hngd lid, ctrl lamp& label.field, or, Sys.M 1/50 1 28248404 MEG2313-0304 SCHUKO sckt-outlts f.spec.circ. with hngd lid, ctrl lamp& label.field, green, Sys.M 1/50 1 28248406 MEG2313-0306 SCHUKO sckt-outlts f.spec.circ. with hngd lid, ctrl lamp& label.field, rby rd,Sys.M 1/50 1 28248419 MEG2313-0319 SCHUKO sckt-outlt with hngd lid, ctrl lamp& labelling field,pol.wht.,glos.,Sys.M 1/50 1 17248425 MEG2313-0325 SCHUKO sckt-outlt with hngd lid, ctrl lamp& labelling field, act.wht,glos.,Sys.M 1/50 1 17248444 MEG2313-0344 SCHUKO sckt-outlt with hngd lid, ctrl lamp & labelling field, wht, glossy, Sys.M 1/50 1 17248514 MEG2370-0414 SCHUKO socket-outlet 45°, anthracite, System M 10/60 1.1 13248519 MEG2370-0419 SCHUKO socket-outlet 45°, polar white, System M 10/60 1 13248544 MEG2370-0444 SCHUKO socket-outlet 45°, white, System M 10/60 1 13248560 MEG2370-0460 SCHUKO socket-outlet 45°, aluminium, System M 10/60 1.1 13249219 MEG2350-4019 SCHUKO socket-outlet with computer marking, polar white, System Design 10/60 1 141249244 MEG2350-4044 SCHUKO socket-outlet with computer marking, white, System Design 10/60 1 141249246 MEG2350-4146 SCHUKO socket-outlet with computer marking, stainless steel, System Design 10/60 1.2 141249260 MEG2350-4060 SCHUKO socket-outlet with computer marking, aluminium, System Design 10/60 1.2 141249319 MEG2350-0319 SCHUKO socket-outlet with computer marking, polar white, glossy, System M 10/60 1 19249325 MEG2350-0325 SCHUKO socket-outlet with computer marking, active white, glossy, System M 10/60 1 19249344 MEG2350-0344 SCHUKO socket-outlet with computer marking, white, glossy, System M 10/60 1 19249414 MEG2350-0414 SCHUKO socket-outlet with computer marking, anthracite, System M 10/60 1.1 19249419 MEG2350-0419 SCHUKO socket-outlet with computer marking, polar white, System M 10/60 1 19249444 MEG2350-0444 SCHUKO socket-outlet with computer marking, white, System M 10/60 1 19249460 MEG2350-0460 SCHUKO socket-outlet with computer marking, aluminium, System M 10/60 1.1 19249519 MEG2370-0319 SCHUKO socket-outlet 45°, polar white, glossy, System M 10/60 1 13249525 MEG2370-0325 SCHUKO socket-outlet 45°, active white, glossy, System M 10/60 1 13249544 MEG2370-0344 SCHUKO socket-outlet 45°, white, glossy, System M 10/60 1 13249602 MEG2372-0302 SCHUKO sckt-outlts f.spec.circ. 45° w.label.field, or, Sys.M 10/60 1 29


ww

w.m

erte

n.co

m




249604 MEG2372-0304 SCHUKO sckt-outlts f.spec.circ. 45° w.label.field, green,Sys.M 10/60 1 29249606 MEG2372-0306 SCHUKO sckt-outlts for special circuits 45° with labelling field, rby rd, Sys. M 10/60 1 29249902 MEG2303-0302 SCHUKO sckt-outlts f.spec.circ. with ctrl lamp& label.field, or,Sys.M 1/50 1 27249904 MEG2303-0304 SCHUKO sckt-outlts f.spec.circ. with ctrl lamp& label.field, green,Sys.M 1/50 1 27249906 MEG2303-0306 SCHUKO sckt-outlts f. spec. circ. with ctrl lamp & labelling field, rby rd,Sys.M 1/50 1 27249919 MEG2303-0319 SCHUKO socket-outlet with ctrl lamp & labelling field, pol. wht., glossy, Sys. M 1/50 1 14249925 MEG2303-0325 SCHUKO sckt-outlt with ctrl lamp & labelling field, active wht, glossy, Sys. M 1/50 1 14249944 MEG2303-0344 SCHUKO socket-outlet with ctrl lamp & labelling field, white, glossy, System M 1/50 1 14265719 MEG2305-4019 SCHUKO socket-outlet with surge protection & labelling field, pol.wht., Sys.Des. 1/50 8 141265744 MEG2305-4044 SCHUKO socket-outlet with surge protection & labelling field, white, Sys. Design 1/50 8 141265746 MEG2305-4146 SCHUKO socket-outlet with surge protection & labelling field, ss., Sys.Des. 1/50 8 141265760 MEG2305-4060 SCHUKO socket-outlet with surge protection & labelling field, alum., Sys.Des. 1/50 8 141265814 MEG2305-0414 SCHUKO socket-outlet with surge protection & labelling field, anthracite, Sys. M 1/50 8 18265819 MEG2305-0419 SCHUKO socket-outlet with surge protection & labelling field, pol. wht., Sys. M 1/50 8 18265844 MEG2305-0444 SCHUKO socket-outlet with surge protection and labelling field, white, System M 1/50 8 18265860 MEG2305-0460 SCHUKO socket-outlet with surge protection & labelling field, aluminium, Sys. M 1/50 8 18266819 MEG2305-0319 SCHUKO sckt-outlt with surge protection & labelling field, pol.wht.,glos., Sys.M 1/50 8 18266825 MEG2305-0325 SCHUKO sckt-outlt with surge protection & labelling field, act. wht,glos., Sys.M 1/50 8 18266844 MEG2305-0344 SCHUKO sckt-outlt with surge protection & labelling field, wht, glossy, Sys. M 1/50 8 18270119 MEG2401-1519 SCHUKO socket-outlet with complete cover plate, polar white, M-SMART 10/60 1.8 111270144 MEG2401-1544 SCHUKO socket-outlet with complete cover plate, white, M-SMART 10/60 1.8 111270319 MEG2401-1619 SCHUKO socket-outlet with complete cover plate, polar white, M-SMART 10/60 1.8 111270344 MEG2401-1644 SCHUKO socket-outlet with complete cover plate, white, M-SMART 10/60 1.8 111270619 MEG2402-4019 SCHUKO socket-outlet with labelling field, polar white, System Design 10/60 1 143270644 MEG2402-4044 SCHUKO socket-outlet with labelling field, white, System Design 10/60 1 143270646 MEG2402-4146 SCHUKO socket-outlet with labelling field, stainless steel, System Design 10/60 1.2 143270660 MEG2402-4060 SCHUKO socket-outlet with labelling field, aluminium, System Design 10/60 1.2 143273419 MEG2401-0319 SCHUKO socket-outlet, polar white, glossy, System M 10/60 1 22273425 MEG2401-0325 SCHUKO socket-outlet, active white, glossy, System M 10/60 1 22273444 MEG2401-0344 SCHUKO socket-outlet, white, glossy, System M 10/60 1 22275219 MEG2401-0619 SCHUKO socket-outlet, polar white, System M 10/60 1 22275244 MEG2401-0644 SCHUKO socket-outlet, white, System M 10/60 1 22275414 MEG2400-0414 SCHUKO socket-outlet, anthracite, System M 10/60 1.1 23275419 MEG2400-0419 SCHUKO socket-outlet, polar white, System M 10/60 1 23275444 MEG2400-0444 SCHUKO socket-outlet, white, System M 10/60 1 23275460 MEG2400-0460 SCHUKO socket-outlet, aluminium, System M 10/60 1.1 23275914 MEG2402-0414 SCHUKO socket-outlet with labelling field, anthracite, System M 10/60 1.1 23275919 MEG2402-0419 SCHUKO socket-outlet with labelling field, polar white, System M 10/60 1 23275944 MEG2402-0444 SCHUKO socket-outlet with labelling field, white, System M 10/60 1 23275960 MEG2402-0460 SCHUKO socket-outlet with labelling field, aluminium, System M 10/60 1.1 23277114 MEG2401-0414 SCHUKO socket-outlet, anthracite, System M 10/60 1.1 22277119 MEG2401-0419 SCHUKO socket-outlet, polar white, System M 10/60 1 22277144 MEG2401-0444 SCHUKO socket-outlet, white, System M 10/60 1 22277160 MEG2401-0460 SCHUKO socket-outlet, aluminium, System M 10/60 1.1 22277419 MEG2400-0319 SCHUKO socket-outlet, polar white, glossy, System M 10/60 1 23277425 MEG2400-0325 SCHUKO socket-outlet, active white, glossy, System M 10/60 1 23277444 MEG2400-0344 SCHUKO socket-outlet, white, glossy, System M 10/60 1 23277519 MEG2401-4019 SCHUKO socket-outlet, polar white, System Design 10/60 1 142277560 MEG2401-4060 SCHUKO socket-outlet, aluminium, System Design 10/60 1.2 142277594 MEG2401-4244 SCHUKO socket-outlet, white, System Design 10/60 1 142277719 MEG2400-4019 SCHUKO socket-outlet, polar white, System Design 10/60 1 143277743 MEG2400-4143 SCHUKO socket-outlet, antique brass, System Design 10/60 1.4 143277744 MEG2400-4044 SCHUKO socket-outlet, white, System Design 10/60 1 143277746 MEG2400-4146 SCHUKO socket-outlet, stainless steel, System Design 10/60 1.2 143277760 MEG2400-4060 SCHUKO socket-outlet, aluminium, System Design 10/60 1.2 143278419 MEG2401-1219 SCHUKO socket-outlet with complete cover plate, polar white, glossy, ATELIER-M 10/60 1.8 101278425 MEG2401-1225 SCHUKO socket-outlet with complete cover plate, active white, glossy, ATELIER-M 10/60 1 101278444 MEG2401-1244 SCHUKO socket-outlet with complete cover plate, white, glossy, ATELIER-M 10/60 1.8 101278719 MEG2401-1019 SCHUKO socket-outlet with complete cover plate, polar white, glossy, 1-M 10/60 1.8 96278725 MEG2401-1025 SCHUKO socket-outlet with complete cover plate, active white, glossy, 1-M 10/60 1 96278744 MEG2401-1044 SCHUKO socket-outlet with complete cover plate, white, glossy, 1-M 10/60 1.8 96278919 MEG2402-0319 SCHUKO socket-outlet with labelling field, polar white, glossy, System M 10/60 1 23278925 MEG2402-0325 SCHUKO socket-outlet with labelling field, active white, glossy, System M 10/60 1 23278944 MEG2402-0344 SCHUKO socket-outlet with labelling field, white, glossy, System M 10/60 1 23279219 MEG2401-1419 SCHUKO socket-outlet with complete cover plate, polar white, glossy, M-SMART 10/60 1.8 111279225 MEG2401-1425 SCHUKO socket-outlet with complete cover plate, active white, glossy, M-SMART 10/60 1 111279244 MEG2401-1444 SCHUKO socket-outlet with complete cover plate, white, glossy, M-SMART 10/60 1.8 111283114 MEG2612-7214 Socket-outlet with earth. pin, hngd lid & labelling field, anthracite, AQ.DES. 10/60 2.1 237283115 MEG2612-7215 Socket-outlet with earth. pin, hngd lid & labelling field, dark brazil, AQ.DES. 10/60 2.1 237283119 MEG2612-7219 Socket-outlet with earth. pin, hngd lid & labelling field, polar white, AQ.DES. 10/60 2.1 237283144 MEG2612-7244 Socket-outlet with earthing pin, hngd lid and labelling field, white, AQUADESIGN 10/60 2.1 237283160 MEG2612-7260 Socket-outlet with earth. pin, hngd lid & labelling field, aluminium, AQUADESIGN 10/60 2.1 237284219 MEG2600-0319 Socket-outlet with earthing pin, polar white, glossy, System M 10/60 1 31284225 MEG2600-0325 Socket-outlet with earthing pin, active white, glossy, System M 10/60 1 31284244 MEG2600-0344 Socket-outlet with earthing pin, white, glossy, System M 10/60 1 31284314 MEG2600-0414 Socket-outlet with earthing pin, anthracite, System M 10/60 1.1 31284319 MEG2600-0419 Socket-outlet with earthing pin, polar white, System M 10/60 1 31284344 MEG2600-0444 Socket-outlet with earthing pin, white, System M 10/60 1 31284360 MEG2600-0460 Socket-outlet with earthing pin, aluminium, System M 10/60 1.1 31


ww

w.m

erte

n.co

m




284515 MEG2600-4015 Socket-outlet with earthing pin, dark brazil, System Design 10/60 1.2 148284519 MEG2600-4019 Socket-outlet with earthing pin, polar white, System Design 10/60 1 148284529 MEG2600-4029 Socket-outlet with earthing pin, light grey, System Design 10/60 1.2 148284543 MEG2600-4143 Socket-outlet with earthing pin, antique brass, System Design 10/60 1.4 148284544 MEG2600-4044 Socket-outlet with earthing pin, white, System Design 10/60 1 148284546 MEG2600-4146 Socket-outlet with earthing pin, stainless steel, System Design 10/60 1.2 148284560 MEG2600-4060 Socket-outlet with earthing pin, aluminium, System Design 10/60 1.2 148284569 MEG2600-4069 Socket-outlet with earthing pin, black grey, System Design 10/60 1.2 148287414 MEG2610-0414 Socket-outlet with earthing pin and hinged lid, anthracite, System M 10/60 1.1 32287419 MEG2610-0419 Socket-outlet with earthing pin and hinged lid, polar white, System M 10/60 1 32287444 MEG2610-0444 Socket-outlet with earthing pin and hinged lid, white, System M 10/60 1 32287460 MEG2610-0460 Socket-outlet with earthing pin and hinged lid, aluminium, System M 10/60 1.1 32287819 MEG2610-4019 Socket-outlet with earthing pin and hinged lid, polar white, System Design 10/60 1 149287843 MEG2610-4143 Socket-outlet with earthing pin and hinged lid, antique brass, System Design 10/60 1.4 149287846 MEG2610-4146 Socket-outlet with earthing pin and hinged lid, stainless steel, System Design 10/60 1.2 149287860 MEG2610-4060 Socket-outlet with earthing pin and hinged lid, aluminium, System Design 10/60 1.2 149287894 MEG2610-4044 Socket-outlet with earthing pin and hinged lid, white, System Design 10/60 1 149287902 MEG2612-4002 Socket-outlet with earth. pin, hngd lid& label.field f.spec.circ., or, Sys.Des. 10/60 1 150287904 MEG2612-4004 Socket-outlet with earth. pin, hngd lid& label.field f.spec.circ., green, Sys.Des. 10/60 1 150287906 MEG2612-4006 Socket-outlet with earth. pin, hngd lid& label.field f.spec.circ. rby rd,Sys.Des. 10/60 1 150288319 MEG2610-0319 Socket-outlet with earthing pin and hinged lid, polar white, glossy, System M 10/60 1 32288325 MEG2610-0325 Socket-outlet with earthing pin and hinged lid, active white, glossy, System M 10/60 1 32288344 MEG2610-0344 Socket-outlet with earthing pin and hinged lid, white, glossy, System M 10/60 1 32288402 MEG2612-0302 Socket-outlet with earth. pin, hngd lid& label.field f.spec.circ., or, Sys.M 10/60 1 33288404 MEG2612-0304 Socket-outlet with earth. pin, hngd lid& label.field f.spec.circ.,Sys.M 10/60 1 33288406 MEG2612-0306 Socket-outlet with earth. pin, hngd lid& label.field f. spec.circ., rby rd,Sys.M 10/60 1 33311200 MEG3112-0000 One-way switch insert 2 pole, flush-mounted, 10 AX, AC 250 V, plug-in terminals 10/60 1 306311500 MEG3115-0000 Two-circuit switch insert 1 pole, flush-mntd, 10 AX, AC 250 V, plug-in terminals 10/60 1 305311501 MEG3715-0000 Roller shutter swit. insrt 1 pole, flush-mntd, 10 A, AC 250 V, plug-in terminals 10/60 1 317311502 MEG3714-0000 Roller shutter swit.insrt with additional cont. 1 pole,10 A, AC 250 V,plug-in terminals 10/60 1 317311600 MEG3116-0000 Two-way switch insert 1 pole, flush-mounted, 10 AX, AC 250 V, plug-in terminals 10/60 1.8 305311601 MEG3126-0000 Double two-way swit. insrt 1 pole, flush-mntd,10 AX, AC 250 V, plug-in terminals 10/60 1 306311700 MEG3117-0000 Intermediate switch insrt 1 pole, flush-mntd, 10 AX, AC 250 V, plug-in terminals 10/60 1 305315000 MEG3150-0000 Push-btn insrt make cont. 1 pole, flush-mntd, 10 A, AC 250 V, plug-in terminals 10/60 1.8 308,364315500 MEG3755-0000 Roller shutter pbtn insrt 1 pole, flush-mntd, 10 A, AC 250 V, plug-in terminals 10/60 1 317315800 MEG3754-0000 Push-btn insrt make cont. 1 pole for hotelcard holder,10 A,250 V AC,plug-in terminals 10/60 1 309315900 MEG3154-0000 Push-btn insrt make cont. 1 pole,10 A, AC 250 V,plug-in terminals 10/60 1 308315901 MEG3156-0000 Push-button insert two-way 1 pole, flush-mntd, 10 A, AC 250 V, plug-in terminals 10/60 1 308,364315902 MEG3155-0000 Double pbtn insrt make cont. 1 pole, flush-mntd,10 A, AC 250 V,plug-in terminals 10/60 1 308315903 MEG3153-0000 Double pbtn insrt 1 make cont. 1 p.+ 1 break cont. 1 p.,10 A, AC 250 V,plug-in terminals 10/60 1 308325200 MEG3102-0000 One-way swit.insrt 2 p. with indicator light,flush-mntd,10 AX, AC 250 V,plug-in terminals 10/60 1 307325500 MEG3125-0000 Two-circuit swit.insrt 1 p. with N terminal,flush-mntd,10 AX,250 V AC,plug-in terminals 10/60 1 306325600 MEG3106-0000 Two-way swit.insrt 1 p. with indicator light,flush-mntd,10 AX, AC 250 V,plug-in terminals 10/60 1 306396176 MEG3902-0000 LED lighting module for double switch/pbtn as ctrl lamp, 100-230 V,multicoloured 1/150 1 325396276 MEG3942-0000 LED lighting module for double swit.es/pbtns as orient. light,100-230 V,multicoloured 1/150 1 325572199 MEG5131-0000 Rotary dimmer insrt for ohm. load with pressure-operated on/off switch, 40-400 W 1/72 8 314,349572299 MEG5133-0000 Rotary dimmer insert for inductive load, 40-600 W/VA 1/72 8 315,349572499 MEG5132-0000 Rotary dimm. insrt for ohm. load with pressure-operated two-way switch, 40-400 W 1/72 8 315,349572599 MEG5133-0000 Rotary dimmer insert for inductive load, 40-600 W/VA 1/72 8 315,349572799 MEG5135-0000 Rotary dimmer insert for inductive load, 60-1000 VA 1/72 8 315,349572999 MEG5142-0000 Electronic potentiometer insert 1-10 V 1/72 8 316,350573299 MEG5135-0000 Rotary dimmer insert for inductive load, 60-1000 VA 1/72 8 315,349577199 MEG5136-0000 Rotary dimmer insert for capacitive load, 20-315 W 1/72 8 316,349


ww

w.m

erte

n.co

m




546

ww

w.m

erte

n.de

Terms and condiTions of sale and supply | ©2010

Terms and condiTions of sale and supply

I. Generalprovisions1) The written agreements signed by

the two parties shall determine the scope of the deliveries or services (hereinafter: deliveries). The Gen-eral Terms and Conditions of Busi-ness of the customer will only ap-ply when they conform with these sales and supply conditions or when we have expressly approved the same in writing.

2) We shall unrestrictedly reserve our exploitation rights under proprie-tary right and copyright law to cost estimates, drawings and other documents (hereinafter: docu-ments). Such documents may only be rendered accessible to third parties with our prior consent and in the event that we are not awarded the order must be re-turned to us without delay should we so request. Articles 1 and 2 shall apply mutatis mutandis to the customer's submissions, though such submissions may be rendered accessible to third par-ties to whom we have assigned re-sponsibility for supplies.

3) Partial supplies shall be admissi-ble insofar as the customer may be reasonably expected to accept the same.

II. Pricesandconditionsofpayment

1) Prices shall be understood to be ex-works excluding packaging and plus the statutory sales tax appli-cable at the time.

2) Given the complete acceptance of goods involving a net amount of Euro 500.00, delivery shall be ef-fected to the point of receipt on the basis of carriage-paid goods, ex-cluding packaging; orders involv-ing net amounts of less than Euro 250.00 shall be subject to a sur-charge for administrative costs of Euro 15.00. Given the complete acceptance of goods involving a net amount of Euro 1000.00, de-livery shall be effected to the point of receipt on the basis of carriage-paid goods, including packaging. Sales shall only be effected against invoices. Special terms and conditions, which we shall confirm in individual cases, shall apply to exports.

3) Packaging will be invoiced at the lowest possible prices and will not be taken back.

4) Insofar as nothing is agreed to the contrary, payment shall, irrespec-tive of the receipt of the goods in-volved, be made to us net within thirty days of the invoice date or within eight days with a 2 % dis-count. Should the payment dead-line be exceeded, interest will, without a reminder being required, be calculated at 9 % over the base rate. Payments shall be made to our payment agent.

5) The customer may only offset re-ceivables which are undisputed or have been established on a legally binding basis.

III. Retentionoftitle Goods shall be supplied subject

to reservation of title involving the following extensions:

1) All supplied goods shall remain our property until such time as our claims against the customer, in-cluding any such claims which may arise from the business connec-tion in the future, are paid in full and for such time as the account, including the bill and cheque com-mitments, has not been settled. This will also apply in the event that the purchase price for certain de-liveries of goods specified by the customer is to be paid. In the case of a current account, the reserved title shall constitute security for our balance claim.

2) The customer shall have a revoca-ble right and, as long as he fulfils his obligations to ourselves and, taking the following provisions into account, shall be entitled to sell on or process during the normal course of business goods which are encumbered with reservation of title. However, the customer shall be forbidden from pledging or assigning as security goods supplied or processed subject to reservation of title. The customer shall, insofar as this is compatible with commercial practices, like-wise undertake only to resell re-served goods which we have sup-plied in conjunction with reser va tion of title. Upon justified request and in the case of default, the customer shall be obliged to apprise us of the name of the third party customer.

3) Insofar as goods encumbered with reservation of title are processed, such processing shall, though with-out any guarantee on our part, be effected for us. In the event of processing by the customer in con-junction with goods which are not our property, we shall be entitled to co-ownership of the new item in proportion to the value of the re-served goods to the other proc-essed goods at the time of process-ing.

4) In the event that goods which we have supplied are combined with other goods, we shall acquire co-ownership of the amount in pro-portion to the value of the reserved goods at the point of combination.

5) Should the customer sell reserved goods which we have supplied or should such goods be supplied to a third party – irrespective of the value or condition – or should such goods be installed within the framework of a contract of manu-facture, supply or construction, the customer shall, until such time as the claims stipulated in sub-sec-tion 1) are settled in full, hereby as-sign to us, up to the amount of the invoice value of our deliveries, the claim, together with all ancillary rights, including the compensation claims accruing to them from the legal transaction involving the re-

sale or installation, accruing to them vis-à-vis their customer or buyer from such sale, delivery or in-stallation. In the event of an assign-ment ban in such contract of man-ufacture, supply or construction and in the event of payment de-fault, the customer shall undertake to apprise their third party custom-ers of the advance assignment.

6) In the event that reserved goods which we have supplied should be sold to third parties in conjunction with other goods, we shall be as-signed that proportion of the total asking price corresponding to the invoice value of our deliveries.

7) The reservation of title with the ex-tensions pursuant to the above provisions shall also remain in force in the event of individual claims against customers on the part of our customer being in-cluded in the current account. In this case, the customer shall, at this early juncture, assign to us the balance pertaining to his credit. The customer shall, upon request and particularly in the event of pay-ment default on the part of the pur-chaser, be obliged to facilitate the direct assertion of the claims in-volved and apprise the third party debtor of the assignment.

8) We must be apprised without delay of any attachments and every kind of restriction which pertain in re-spect of our property. In the event that the value of the overall collat-eral stemming from the business connection with which we have been furnished should exceed our delivery claims by more than 20%, we shall, at the request of the cus-tomer, be obliged to reassign the assigned claims to this extent.

9) In the event of any incidence of damage or other impairment to the equipment supplied on the basis of our terms and conditions, the customer shall, at this early junc-ture, assign to us in advance the compensation claim accruing to him from his insurance to the amount of the incidence of dam-age relating to our reserved prop-erty.

IV. Deadlinefordeliveries;default1) The deadline for deliveries or serv-

ices shall commence on the day on which written agreement is pre-sented pertaining to the order in question between the customer and ourselves. The observance of such deadline presupposes the prompt receipt of all the docu-ments, requisite licences and re-leases to be furnished by the cus-tomer, the prompt clarification and approval of the plans and the ob-servance of the agreed Terms and Conditions of Payment and other obligations. Should these require-ments not be fulfilled on time, the delivery deadline shall be ex-tended by an adequate period of time; this shall not apply if we are responsible for the delay.

2) Should the non-observance of deadlines be attributable to force majeure, such as mobilisation, war, civil commotion or similar oc-currences, e.g. strike or lockout, delivery deadlines shall be ex-tended by adequate periods of time.

3) In the event of default, the cus-tomer may, insofar as he can plau-sibly establish that he has been prejudiced by the delay in ques-tion, request default compensa-tion for every completed week of such delay of 0.5% up to a total amount of 5% of the value of that component of the deliveries or services which it has not been pos-sible to put into appropriate opera-tion due to the late completion of individual accompanying items.

4) Both compensation claims on the part of the customer for delivery default and compensation claims in lieu of performance which ex-ceed the limits stipulated in para. 3 shall, in all instances of delayed delivery, including following the ex-piry of any delivery deadline which we may have set, be excluded. This shall not apply in cases of wilful in-tent or gross negligence or injury to life, body or health, where compul-sory liability applies. The customer may withdraw from the contract within the framework of the prevail-ing statutory provisions only inso-far as we are responsible for a delay in delivery. The above stipu-lations shall not entail a change in the burden of proof to the detri-ment of the customer.

5) The customer shall, at our request, undertake to declare within a rea-sonable period of time whether he is withdrawing from the contract due to a delay in delivery or is in-sisting upon delivery.

6) In the event that dispatch or deliv-ery should, at the behest of the customer, be delayed by more than one month following notification of readiness for dispatch, the cus-tomer may, for every month com-menced, be invoiced storage costs to the amount of 0.5% of the price of the delivery items, though no more than a total of 5%. The con-tracting parties shall be at liberty to prove that lower or higher stor-age costs have accrued. If the cus-tomer is delayed in accepting the goods, the legal consequences for the delay in acceptance of goods will remain unaffected.

Termsandconditionsof

saleandsupply

547

ww

w.m

erte

n.de

(c)2010 | Terms and condiTions of sale and supply

Terms and condiTions of sale and supply

V. Transferofrisk Risk is transferred to the customer

upon transfer to a transport car-rier, and at the latest at the point when the delivery leaves our works or warehouse, even if delivery on a carriage paid basis has been agreed. Deliveries are shipped at the customer's expense only inso-far as not otherwise specified un-der Section II, para. 2 of our condi-tions. In the absence of a written arrangement to the contrary, dis-patch shall always be effected ac-cording to our best judgement. We cannot assume any responsibility for transporting by the cheapest method available. We shall only ar-range transport insurance policies when their cost is borne by the pur-chaser and when there is express, written agreement.

VI. Acceptance The customer may not refuse to ac-

cept deliveries on the grounds of minor defects.

VII.Materialdefects1) The prerequisite for the assertion

of material defects liability shall be the submission to us or our author-ised representative of proof of ac-quisition (delivery note, invoice, etc.). The warranty entitlement may not be transferred to third par-ties without our consent.

2) We do not assume any guarantees for the quality of the services. Our statements regarding the quality of specific features or characteris-tics of services are intended only to define the agreed quality of services as defined by Article 434 of the German Civil Code. All those components or services which ex-hibit a material defect within the limitation period – irrespective of operating life – shall, as we see fit, be repaired, resupplied or refur-nished insofar as the cause of the same occurred at the time of transfer of risk.

3) Material defects claims shall lapse after twelve months. This will not apply when legislation as per Arti-cles 438 Para. 1.2 (Structures and items for structures), 479 Para. 479 1 (Claim under a right of re-course) and 643a Para. 1.2 (Con-struction defects) of the German Civil Code makes provision for longer periods of time, in in-stances of injury to life, body or health, in the event of a wilful or grossly negligent breach of duty on our part and in the event of the ma-licious non-disclosure of a defect. The statutory provisions pertain-ing to the suspension of expira-tion, suspension and recom-mencement of periods shall remain unaffected.

4) The customer shall submit com-plaints pertaining to material de-fects to us in writing without delay.

5) In the event of notification of de-fects, payments on the part of the customer may be withheld on a scale which is in a reasonable ratio to the material defects which have occurred. The customer may only withhold payments should a com-plaint be asserted whose justifica-tion is beyond doubt. Should a complaint have been submitted without justification, we shall be entitled to request that the cus-tomer reimburse the costs which we have incurred.

6) In the first instance, we shall be granted the opportunity to effect subsequent fulfilment within a rea-sonable period of time. We may elect to effect subsequent fulfil-ment by remedying the defect or by providing a defect-free service.

7) Should such subsequent fulfil-ment be unsuccessful, the cus-tomer – any compensation claims pursuant to Section IX notwith-standing – may withdraw from the contract or reduce the amount of payment. The customer may not rescind the contract when a serv-ice has not been performed in ac-cordance with the contract when the customer's right to subse-quent fulfilment in accordance with Section VII, para. 3 of our con-ditions has become subject to the statute of limitations and we in-voke this stipulation.

8) Claims arising from defects shall not prevail in respect of a minor deviation from an agreed quality level, a minor impairment to usa-bility, natural wear and tear or inci-dences of prejudice which arise subsequent to the risk transfer due to faulty or negligent handling, excessive strain, unsuitable oper-ating facilities, faulty construction operations, unsuitable subsoil and, in particular, any external in-fluences which are not presup-posed by the contract, as well as non-reproducible software de-fects. In the event that modifica-tions or maintenance operations should be improperly performed by the customer or any third par-ties, it shall likewise be the case that no claims arising from defects shall prevail for such modifications and maintenance operations or any resulting consequences.

9) Any claims on the part of the cus-tomer for expenditure which it is necessary to incur for subsequent fulfilment purposes, particularly transport, travelling, labour and material costs, shall be excluded insofar as such expenditure in-creases due to the fact that a de-livery item has been subsequently transported to a location other than the customer's business premises unless such transporta-tion is in line with the normal use of such item.

10) Claims under rights of recourse against ourselves on the part of the customer pursuant to Article 478 of the German Civil Code (Contractor's recourse) shall only persist insofar as the customer has not agreed any arrangements with his customer ex-ceeding the scope of the statutory claims arising from defects. Section 7, para. 9 of our conditions shall also apply mutatis mutandis to the scope of the customer's claim un-der a right of recourse against our-selves pursuant to Article 478 Para. 2 of the German Civil Code.

11) It should be noted that Section IX (Other compensation claims) shall apply to compensation claims. Any further claims for a material defect against us and our agents on the part of the customer and any claims for a material defect against us and our agents on the part of the customer other than those stipulated in Section VII shall be excluded.

VIII. Impossibility,Contractamendment

1) Insofar as a delivery is impossible, the customer shall be entitled to claim compensation unless we are not responsible for such impossi-bility. However, the customer's en-titlement to compensation shall be restricted to 10% of the value of that component of the delivery which cannot be put into appropri-ate operation as a result. This en-titlement shall not apply in cases of wilful intent, gross negligence or injury to life, body or health where compulsory liability prevails; this shall not entail a change in the bur-den of proof to the detriment of the customer. The right of the cus-tomer to withdraw from the con-tract shall remain unaffected.

2) Insofar as any unforeseeable oc-currences within the purport of Sec-tion IV, Para. 2 considerably alter the economic importance of the item of delivery or exercise a major influence on our operations, the contract shall be suitably revised in compliance with the principle of good faith. Insofar as this is not eco-nomically justifiable, we shall be entitled to withdraw from the con-tract. In the event that we should wish to exercise this right of with-drawal, we shall apprise the cus-tomer accordingly without delay upon becoming aware of the impli-cations of this occurrence, also in the event that an extension of the delivery period should initially have been agreed with the customer.

IX. Otherclaimsfordamages1) Claims for compensation and

claims for the compensation of ex-penses (hereinafter: compensa-tion claims) on the part of the cus-tomer, irrespective of the legal grounds, particularly for a breach of the duties arising from the con-tractual obligation and for tortious acts, shall be excluded.

2) This shall not apply insofar as com-pulsory liability prevails, e.g. pur-suant to the Product Liability Act, in cases of wilful intent, gross neg-ligence, injury to life, body or health and a breach of major con-tractual obligations.

However, a claim for compensa-tion with regard to a breach of ma-jor contractual obligations shall be restricted to the contractually typi-cal, foreseeable prejudice insofar as wilful intent or gross negligence do not exist or liability exists due to injury to life, body or health. The above stipulations shall not entail a change in the burden of proof to the detriment of the customer.

3) Insofar as the customer is entitled to compensation claims pursuant to Section IX, such claims shall lapse upon the expiry of the limita-tion period pursuant to Section VII, Para. 3 applying to claims for ma-terial defects. In the case of com-pensation claims pursuant to the Product Liability Act, the prevailing statutory limitation provisions shall apply.

X.Depictions,dimensionsandweights

shall always be regarded as ap-proximate.

XI. Placeofcontractfulfilment,placeofjurisdictionandapplicablelaw

1) Insofar as nothing to the contrary is agreed, the place of contract ful-filment shall be Gummersbach, Germany.

2) In the event of the customer being a businessman, the sole place of jurisdiction for all disputes arising directly or indirectly from the con-tractual relationship shall be Gum-mersbach, Germany. However, we also have the right to file suit against the customer at his legal place of venue.

3) German substantive law shall, to the exclusion of the UN Convention on Contracts pertaining to the In-ternational Sale of Goods (CISG), apply to the legal relations in con-nection with this contract.

XII.Intheeventthatoneorseveralofthe stipulations of the abovetermsandconditionsofsaleandsupplyareorbecomeinvalid,thevalidityoftheremainingstipula-tions as well as of these thetermsandconditionsofsaleandsupply are not affected. Sen-tence1alsoappliestoalladdi-tional contractual agreementsbetweentheparties,as longasadhering to the contract wouldnotconstituteanunduehardshipforoneoftheparties.

Termsandconditionsof

saleandsupply

1 | | ©2010

0 System M/Einsätze

0 Vorschaltseite

1 Vorschaltseite

2 Vorschaltseite

3 Vorschaltseite

4 Vorschaltseite

5 Vorschaltseite

6 Vorschaltseite

7 Vorschaltseite

8 Vorschaltseite

9 Vorschaltseite

10 Vorschaltseite

11 Vorschaltseite

12 System M / Inserts

12 SCHUKO socket-outlets with plug-in ter-minals

22 SCHUKO socket-outlets with screw ter-minals

26 SCHUKO socket-outlets for special circuits

30 Socket-outlets (international)

38 Switch rockers

40 Rocker switches (illuminated)

43 Splash-proof - IP 44

45 The round switch

45 JUMBO, the big switch

45 Special switch functions

47 Time switch insert

48 Touch sensor surfaces (switching/dimming)

51 Covers for rotary dimmers

52 Roller shutter switches

53 Blind control system

55 Movement detectors

56 Room temperature control units

57 KNX

63 Components for Ritto TwinBus

64 Signal and info covers

68 Central plates for communications techno-logy

70 Communications inserts

72 Telecommunications

76 Data technology

80 TV/audio

84 ELSO MEDIOPT care®

85 Visual call systems


89 Accessories

90 1-M/Rahmen

90 Artikelübersicht


92 1-M/frame

92 1-M/frame

92 1-M frame with labelling bracket

94 Surface-mounted housing for 1-M, ATELIER-M



98 ATELIER-M/frames

98 ATELIER-M/frames




102 M-SMART/Rahmen



104 M-SMART/Frames

104 M-SMART frames

105 M-SMART frames with labelling bracket

108 Surface-mounted housing for M-SMART, ARTEC, OCTOCOLOR





114 M-ARC/Rahmen



116 M-ARC/Frames

116 M-ARC frames

©2010 | | 2

118 M-STAR/Frames

118 M-STAR frames

120 M-PLAN/Rahmen



122 M-PLAN/Frames

122 M-PLAN frames

123 M-PLAN frames, with labelling option

126 M-PLAN II/Frames

126 M-PLAN II frames, flush-mounted

128 M-PLAN-Echtglasrahmen



130 M-PLAN real glass frames

130 M-PLAN real glass frames

132 M-PLAN metal frames

132 M-PLAN metal frames

134 System Fläche/Einsätze



136 System Design/Inserts



145 SCHUKO socket-outlets for special circuits


153 Switch rockers











167 KNX




178 Data technology

181 TV/audio


185 Accessories

188 ARTEC/Rahmen



190 ARTEC/Frames

190 ARTEC frames


192 SCHUKO socket-outlets

192 Socket-outlets

193 Accessories

194 ANTIK/Rahmen



196 ANTIK/Frames

196 ANTIK frames

198 TRANCENT/Rahmen



200 TRANCENT/Frames

202 TRANCENT/Frames

202 TRANCENT frames

202 TRANCENT glass sensor covers

203 TRANCENT socket-outlets

204 TRANCENT cover foils

204 TRANCENT control electronics, 1-gang and

3 | | ©2010

inserts

206 TRANCENT two-circuit control electronics with insert

207 TRANCENT roller shutter control electronics and insert

207 KNX

207 Signal and info covers

208 OCTOCOLOR/Einsätze



210 OCTOCOLOR/Inserts




212 Switch rockers


212 Push-down buttons












225 Data technology

226 TV/audio

228 Accessories

229 OCTOCOLOR/Frames

229 OCTOCOLOR frames


232 AQUADESIGN



234 AQUADESIGN



237 Switch rockers



239 Waterproof movement detectors

239 KNX

239 Communications technology

241 Accessories

241 AQUADESIGN frames

244 PANZER



246 ANTI-VANDALISM




247 Switches and push-buttons, without frames


248 KNX

248 Communications inserts and accessories

249 ANTI-VANDALISM frames

250 AQUASTAR



252 AQUASTAR

252 Switches, push-buttons and accessories




256 Accessories

258 SCHLAGFEST



©2010 | | 4

260 IMPACT-RESISTANT




263 Accessories

264 AGRAR



265 Accessories

266 AUFPUTZ



268 SURFACE-MOUNTED



271 Accessories for surface-mounted socket-outlets and combinations



273 Accessories for surface-mounted housing

274 System Basis/Einsätze



276 System Basis/Inserts

276 SCHUKO socket-outlets and accessories

277 Socket-outlets and accessories

277 Switch rockers

278 Push-down buttons













287 Data technology

288 TV/audio

289 Accessories

291 M1/Frames

291 M1 frames

291 M1 frames, with labelling option


293 SCHUKO socket-outlets and accessories

294 Socket-outlets

295 ATELIER/Frames

295 ATELIER frames

296 Surface-mounted housing for ATELIER



297 Socket-outlets

298 Unterputzeinsätze/Zubehör







304 Flush-mounted inserts/accessories

304 Switch and push-button inserts

305 Rocker switch inserts

307 Rocker button inserts


311 Button dimmer

312 Contact switch

314 Extension inserts

314 Rotary dimmers

317 Roller shutter switch inserts


319 Room temperature control inserts

320 Power boosters

320 Remote controls

5 | | ©2010


324 TV/audio

325 Accessories for universal inserts

328 Funk-System CONNECT



330 CONNECT radio system

332 CONNECT radio system

332 CONNECT radio system, central unit

333 CONNECT radio system, configurator

333 CONNECT radio system, push-button

337 CONNECT radio system, switching/dimming

340 CONNECT radio system, roller shutter

341 CONNECT radio system, ARGUS movement detector

342 CONNECT radio system, heating

344 Dimmersystem / Trafos



346 Dimmer system/transformers

348 Dimmer system/transformers

348 Comfort rotary dimmer

348 Rotary dimmers

351 Rotary dimmer inserts for 600 VA

352 Rotary dimmer up to 900 VA

353 Double touch dimmer

354 Button dimmer

355 Contact switch

356 Extension inserts


359 Power boosters

360 Control units 1-10 V

360 Rotary dimmers

360 DIN rail mounted rotary dimmers

361 DIN rail mounted dimmers

362 DIN rail mounted memory super dimmers

362 Remote controls

363 Electronic transformers/low voltage halo-gen systems MET B

364 Electronic transformers/low voltage halo-gen systems MET D

364 Control inserts for MET D

365 Accessories

366 Jalousiesteuerungssystem





369 Inserts

370 Blind push-button

371 Blind push-button with sensor connection

372 Blind push-button with memory function and sensor connection

373 Blind push-button with IR receiver and sen-sor connection

374 CONNECT roller shutter push-button with sensor connection

375 Standard blind time switch

377 Comfort blind time switch

379 Sensors

380 Remote controls

382 Gebäudekommunikation / Ritto Twinbus



384 Building communications / Ritto Twinbus

384 Components for Ritto TwinBus

386 ARGUS Bewegungsmelder Aufputz



388 ARGUS surface-mounted mo-vement detector

388 ARGUS movement detector, standard

392 ARGUS movement detector, remote control

392 ARGUS movement detector, CONNECT

©2010 | | 6

radio system

393 ARGUS movement detector, KNX

394 Accessories

396 ARGUS Präsenzmelder



398 ARGUS flush-mounted mo-vement detector

398 Flush-mounted inserts for ARGUS mo-vement detectors

398 ARGUS flush-mounted movement detectors

399 ARGUS flush-mounted movement detector with switch

400 ARGUS flush-mounted movement detec-tors, waterproof

400 ARGUS movement detector, KNX

402 ARGUS Präsenzmelder



404 ARGUS presence detectors

404 ARGUS Presence system

405 ARGUS Presence

406 KNX ARGUS Presence

408 Accessories

410 ARGUS Dämmerungsschalter



412 ARGUS light-sensitive swit-ches

412 ARGUS light-sensitive time switch

412 ARGUS light-sensitive switches

413 Accessories

414 ARGUS Rauchmelder



416 ARGUS smoke detectors

416 ARGUS smoke detector

418 Accessories

420 Netzwerktechnik



422 Network technology

422 Line 21

422 Network components



427 Communications technology

430 KNX Systemgeräte / Zubehör



432 KNX system devices/acces-sories

432 Bus voltage supply

433 System components

434 System accessories

436 Function module

437 Interfaces/gateways

440 Teaching aids

442 KNX Sensoren



444 KNX sensors

444 Push-buttons System M

450 System Design push-button

455 TRANCENT push-button

455 Bus coupling unit for switch rockers

456 Room temperature control unit System M

459 Room temperature control unit System De-sign

461 Radio transmitters

463 Binary inputs


467 Presence detector

469 Other sensors

474 Time switch

7 | | ©2010

476 Devices for display and operation

482 KNX Systemgeräte / Zubehör



484 KNX actuators

485 KNX actuators

485 Switch actuators REG-K, 10 A with manual mode

485 Switch actuators REG-K, 16 A with manual mode

486 Switch actuators REG-K, 16 A with manual mode and current detection

486 Switch actuators REG-K

487 Flush-mounted switch actuators

487 Blinds/switch actuators REG-K with manual mode

488 Blind actuators REG-K with manual mode

489 Blind actuators and accessories

491 Dimming actuators

494 Control units 0-10 V

495 DALI gateways

496 Room temperature control unit

499 Complete radio receiver units, switching and dimming

500 Other actuators

501 Devices for display and operation

506 Herd- und Geräteanschluss-dosen



508 Cooker and appliance con-nection boxes

508 Cooker and appliance connection boxes

509 Cable junction boxes

510 Rubber SCHUKO plugs and connectors

510 Heavy-duty all-rubber plugs and connectors

511 All-rubber plugs and connectors

512 Rubber plugs and connectors

513 Export versions

513 Rubber SCHUKO connector

514 SCHUKO plugs and connec-tors

514 SCHUKO plugs and sockets

516 Informationen



546 Herd- und Geräteanschluss-dosen



©2010 | | 8

Documents

merten prize part2