Membangun Warnet ADSL Speedy dengan Mikrotik RB750

Konfigurasi Interface Mikrotik

Klik menu Interface

Lalu ganti nama interface default Mikrotik RB750

Interface port 1 dan port 2 ganti namanya :

Port 1 : ToModem

Port 2 : ToSwitch

[admin@MikroTik] > /interface print

Flags: D - dynamic, X - disabled, R - running, S - slave

# NAME TYPE MTU L2MTU

0 R ;;; Interface ke Modem

ToModem ether 1500 1526

1 R ;;; Interface ke Switch

ToSwitch ether 1500 1524

2 ether3-local-slave ether 1500 1524

3 ether4-local-slave ether 1500 1524

4 ether5-local-slave ether 1500 1524

Konfigurasi IP Address

Klik menu IP > Address

Masukkan IP Address ke Interface ToModem : 192.168.1.2/24

Ulangi langkah diatas untuk IP Address ke Interface ToSwitch : 192.168.0.1/24

[admin@MikroTik] > /ip address print

Flags: X - disabled, I - invalid, D - dynamic

# ADDRESS NETWORK BROADCAST INTERFACE

0 192.168.1.2/24 192.168.1.0 192.168.1.255 ToModem

1 192.168.0.1/24 192.168.0.0 192.168.0.255 ToSwitch

Konfigurasi Gateway

Klik menu IP > Routes

Set gateway ke IP Modem 192.168.1.1

[admin@MikroTik] > /ip route print

Flags: X - disabled, A - active, D - dynamic,

C - connect, S - static, r - rip, b - bgp, o - ospf, m - mme,

B - blackhole, U - unreachable, P - prohibit

# DST-ADDRESS PREF-SRC GATEWAY DISTANCE

0 A S 0.0.0.0/0 192.168.1.1 1

1 ADC 192.168.0.0/24 192.168.0.1 ToSwitch 0

2 ADC 192.168.1.0/24 192.168.1.2 ToModem 0

Konfigurasi DNS Server

Klik Menu IP > DNS

Set DNS Primary : 203.130.208.18, Secondary DNS : 203.130.196.155

[admin@MikroTik] > /ip dns print

servers: 203.130.208.18, 203.130.196.155

allow-remote-requests: yes

max-udp-packet-size: 512

cache-size: 2048KiB

cache-max-ttl: 1w

cache-used: 6KiB

Konfigurasi NAT

Klik menu IP > Firewall

Cek secara default sudah ada NAT Masquerade

[admin@MikroTik] > /ip firewall nat print

Flags: X - disabled, I - invalid, D - dynamic

0 ;;; default configuration

chain=srcnat action=masquerade out-interface=ToModem

Konfigurasi DHCP

Membuat IP Address Pool

Klik menu IP > Pool

New IP Pool

Address : 192.168.0.100 – 192.168.0.254

Set DHCP Network

Klik Menu IP > DHCP Server

Klik Tab Network > +

[admin@MikroTik] > /ip pool print

# NAME RANGES

0 default-dhcp 192.168.88.10-192.168.88.254

1 DHCP-WARNET-POOL 192.168.0.100-192.168.0.254

Set DHCP Server Aktif

Klik tab DHCP > +

[admin@MikroTik] > /ip dhcp-server network print

# ADDRESS GATEWAY DNS-SERVER WINS-SERVER DOMAIN

0 ;;; DHCP WARNET LAN KABEL

192.168.0.0/24 192.168.0.1 203.130.208.18

203.130.196.155

[admin@MikroTik] > /ip dhcp-server print

Flags: X - disabled, I - invalid

# NAME INTERFACE RELAY ADDRESS-POOL LEASE-TIME ADD-ARP

0 X default ToSwitch default-dhcp 3d

1 FAROU... ToSwitch DHCP-WARNET-POOL 3d

Selesai.

Untuk pengaturan bandwith kita pakai teknik PCQ, bandwith akan dibagi rata ke setiap client. Misal kita pakai bandwith Speedy 2 Mbps dengan 10 klien aktif maka akan dibagi 2Mbps/10. Apabila hanya 1 klien yang aktif maka seluruh bandwith akan dipakai oleh 1 klien.

Masuk ke terminal :

Copy paste skrip dibawah

/ip firewall mangle add chain=forward src-address=192.168.0.1/24 action=mark-connection new-connection-mark=WARNET-CM

/ip firewall mangle add connection-mark=WARNET-CM action=mark-packet new-packet-mark=WARNET-PM chain=forward

/queue type add name=download-pcq kind=pcq pcq-classifier=dst-address

/queue type add name=upload-pcq kind=pcq pcq-classifier=src-address

/queue tree add name=DOWNLOAD parent=ToSwicth queue=download-pcq packet-mark=WARNET-PM

/queue tree add name=UPLOAD parent=ToModem queue=upload-pcq packet-mark=WARNET-PM

Referensi : http://wiki.mikrotik.com/wiki/Manual:Queues_-_PCQ_Examples