Upload
riversound
View
222
Download
0
Embed Size (px)
Citation preview
8/8/2019 Melin High Performance - 8 Pg
http://slidepdf.com/reader/full/melin-high-performance-8-pg 1/8
8/8/2019 Melin High Performance - 8 Pg
http://slidepdf.com/reader/full/melin-high-performance-8-pg 2/8
We’re a company on the Leading Edge of Technology ,
whose Service and Reliability is second-to-none.
...That’s the MELIN Advantage.
We’re a company on the Leading Edge of Technology ,
whose Service and Reliability is second-to-none.
...That’s the MELIN Advantage.
THE MELIN ADVANTAGE
MELIN TOOL has been serving the needs of our
customers since 1940. We pride ourselves in offering the
latest products in BOTH CARBIDE and HIGH SPEED
STEEL at competitive prices.You’ll be impressed not only by our products, but by our custom solutions, our superior customer
service and our exibility.
Our products are all made in the USA, in our state-of-the-
art facilty. Our High Performance End Mill Series meets strict
quality standards and is specially designed for use in high speed
machining and for dif cult-to-cut materials.
As always, Melin is equipped to handle special orders as well. We
can also coat any of our uncoated High Performance End Mills to
better meet your speci c needs. Feel free to contact us to learn more
about our custom solutions, or to receive information on all of
our other outstanding products.
1 www.EndMill.com
8/8/2019 Melin High Performance - 8 Pg
http://slidepdf.com/reader/full/melin-high-performance-8-pg 3/8
AMG35 & CCMG35 Series - 35° Helix End Mills,2 & 4 Flute
AMG35 & CCMG35 Series - 35° Helix End Mills,2 & 4 Flute, Ball End
VHMG Series - Variable Helix with Radius
VXMG Series - Variable Helix with Chamfer
Helix changes along utes.•
Increased stability during cutting action and substantial increases in speed.•
Small• corner radius for added strength and smoother cutting action.
AlTiN coated for improved tool life and increased production output.•3/8” and larger avaiable with shank at•
Increased stability during cutting action and substantial increases in speed.•
Small• chamfer for added strength and smoother cutting action.AlTiN coated for improved tool life and increased production output.•
3/8” and larger avaiable with shank at•
COATED HIGH PERFORMANCE SERIES
Special helix and geometry for machining carbon steel, alloy steel,•
and stainless steel.AlTiN coated for improved tool life and increased production output.•
Special helix and geometry for machining carbon steel, alloy steel,•
and stainless steel.For radius and contouring part surfaces.•
AlTiN coated for improved tool life and increased production output.•
F o r u s e o n :
AlluminumAlloys
CarbonSteel
AlloySteel
HardSteel
NickelAlloy
StainlessSteel
SteelRC-25-37
CastIron
Titanium BestApplicationsare marked
F o r u s e o n :
AlluminumAlloys
CarbonSteel
AlloySteel
HardSteel
NickelAlloy
StainlessSteel
SteelRC-25-37
CastIron
Titanium BestApplicationsare marked
F o r u s e o n :
AlluminumAlloys
CarbonSteel
AlloySteel
HardSteel
NickelAlloy
StainlessSteel
SteelRC-25-37
CastIron
Titanium BestApplicationsare marked
F o r u s e o n :
AlluminumAlloys
CarbonSteel
AlloySteel
HardSteel
NickelAlloy
StainlessSteel
SteelRC-25-37
CastIron
Titanium BestApplicationsare marked
aa aa a aa
aa aa a aa
aa aa a a
aa aa a a
2
Melin can create Custom Solutions to meet all of your needs.Melin can create Custom Solutions to meet all of your needs.
8/8/2019 Melin High Performance - 8 Pg
http://slidepdf.com/reader/full/melin-high-performance-8-pg 4/8
Flexibility , Dependabilityand cutting-edge Technology ...
MELIN TOOLScan provide it all.
Flexibility , Dependabilityand cutting-edge Technology ...
MELIN TOOLScan provide it all.
COATED HIGH PERFORMANCE SERIES
VBMG Series - Spherical Ball EndAlTiN coated for increased tool life or nACo coated for hardened•
steel.High performance ball nose plus end mills are used in the mold•
industry and have a full 220 degree arc cutting capability.Tools are stocked with a coating to optimize cutting performance.•15
F o r u s e o n :
AlluminumAlloys CarbonSteel AlloySteel HardSteel NickelAlloy StainlessSteel SteelRC-25-37 CastIron Titanium BestApplicationare markeda aa a a a
3
HMG Series - Die and Mold Milling
CCMG45 Series - 45° Helix End Mills with Radius
Short ute length with reduced neck for maximum rigidity.•
nACo coated for durability.•
Use air mist coolant for materials harder than RC40.•
nACo coated for increased tool life.•
For material over 50Rc.•
Increased core diameter for added strength.•
Use for light nishing cuts.•
15
45
F o r u s e o n :
AlluminumAlloys
CarbonSteel
AlloySteel
HardSteel
NickelAlloy
StainlessSteel
SteelRC-25-37
CastIron
Titanium BestApplicationsare markeda a a a a
F o r u s e o n :
AlluminumAlloys CarbonSteel AlloySteel HardSteel NickelAlloy StainlessSteel SteelRC-25-37 CastIron Titanium BestApplicationsare markeda a
Local Calls: 216.362.4200 • Toll Free: 800.521.1078 • Web: www.EndMill.com
8/8/2019 Melin High Performance - 8 Pg
http://slidepdf.com/reader/full/melin-high-performance-8-pg 5/8
Please Note: All uncoated tools can be coatedwith standard coatings TiN, TiCN, or AlTN
ALMG Series - Aluminum Cutting End Mills, 2 Flute
ELMG Series - Aluminum Cutting End Mills, 3 Flute
AMG40 & CCMG40 Series - 40° Helix End Mills2 & 4 Flute
AMG40 & CCMG40 Series - 40° Helix End Mills2 & 4 Flute, Ball End
Special geometry allows for high chip loads and feed rates.•
Small• corner radius for added strength and smoother cutting action.Excellent for slotting and pro ling at high speeds.•
3 Flute design for lighter nishing cuts.•
Small• corner radius for added strength and smoother cutting action.
High helix for excellent chip ejection.•
Higher shearing action.•
Used for stainless steel and exotic materials.•
High helix for excellent chip ejection.•
For radius and contouring part surfaces.•
Higher shearing action.•
Used for stainless steel and exotic materials.•
F o r u s e o n :
AlluminumAlloys
CarbonSteel
AlloySteel
HardSteel
NickelAlloy
StainlessSteel
SteelRC-25-37
CastIron
Titanium BestApplicationsare marked
F o r u s e o n :
AlluminumAlloys
CarbonSteel
AlloySteel
HardSteel
NickelAlloy
StainlessSteel
SteelRC-25-37
CastIron
TitaniumBestApplicationsare marked
F o r u s e o n :
Alluminum
Alloys
Carbon
Steel
Alloy
Steel
Hard
Steel
Nickel
Alloy
Stainless
Steel
Steel
RC-25-37
Cast
Iron
Titanium BestApplicationsare marked
F o r u s e o n :
AlluminumAlloys
CarbonSteel
AlloySteel
HardSteel
NickelAlloy
StainlessSteel
SteelRC-25-37
CastIron
Titanium BestApplicationsare markeda a a aa
a a a aa
a
a
4
UNCOATED HIGH PERFORMANCE SERIES
8/8/2019 Melin High Performance - 8 Pg
http://slidepdf.com/reader/full/melin-high-performance-8-pg 6/8
UNCOATED HIGH PERFORMANCE SERIES
F o r u s e o n :
AlluminumAlloys
CarbonSteel
AlloySteel
HardSteel
NickelAlloy
StainlessSteel
SteelRC-25-37
CastIron
Titanium BestApplicationsare marked
CRFMG Series - Rougher/Finisher End Mills
CRMG Series - Roughing End Mills
Can remove material at high roughing speeds while producing•
nishes close to conventional end mills, due to the chip-breaker form.
Form relieved on high strength carbide for excellent pro le milling.•
0
0 F o r u s e o n :
AlluminumAlloys
CarbonSteel
AlloySteel
HardSteel
NickelAlloy
StainlessSteel
SteelRC-25-37
CastIron
Titanium BestApplicationsare marked
a a a a a
a a a a a
5
EMG35 Series - 35° Helix End Mills, 3 Flute
GMG Series - 45° Helix End Mills
Five ute design provides excellent cutting performance at faster feed•
rates.Smooth cutting action in tough to machine material with excellent chip•
ejection.
Special helix for dif cult to machine materials such as stainless or •
inconel.Small• corner radius for added strength and smoother cutting action.
35
45
F o r u s e o n :
AlluminumAlloys
CarbonSteel
AlloySteel
HardSteel
NickelAlloy
StainlessSteel
SteelRC-25-37
CastIron
Titanium BestApplicationsare marked
F o r u s e o n :
AlluminumAlloys
CarbonSteel
AlloySteel
HardSteel
NickelAlloy
StainlessSteel
SteelRC-25-37
CastIron
Titanium BestApplicationsare marked
aa aa a a
a a aa a a a
Note: All uncoated tools can be coated with standard coatings TiN, TiCN, or AlTN
EMG60 Series - 60° Helix End MillsUsed for stainless and high temperature alloy materials.•
High helix provides excellent shearing action.•
60 F o r u s e o n :
AlluminumAlloys CarbonSteel AlloySteel HardSteel NickelAlloy StainlessSteel SteelRC-25-37 CastIron Titanium BestApplicationsare markedaa
8/8/2019 Melin High Performance - 8 Pg
http://slidepdf.com/reader/full/melin-high-performance-8-pg 7/8
Melin offers many PremiumQuality high performance tools.
Visit www.EndMill.com
to learn more.
SPECIAL USE MINIATURE END MILLS
6
AMG & CCMG Miniature End MillsIn Decimal Sizes - 2 & 4 Flute Ball End
AMG & CCMG Series Miniature End MillsIn Decimal Sizes, 2 & 4 Flute Square End
Available from .010” to .100” on 1/8” shank.•Available from 0.2mm to 1.5.mm on 3mm shank.•
Special lengths and long reach available on request.•
Available from .005” to .100” on 1/8” shank.•
Available from 0.2mm to 1.5.mm on 3mm shank.•
Special lengths and long reach available on request.•
Melin offers many PremiumQuality high performance tools.
Visit www.EndMill.com
to learn more.
Note: All uncoated tools can be coated with standard coatings TiN, TiCN, or AlTN
Local Calls: 216.362.4200 • Toll Free: 800.521.1078
3
3
8/8/2019 Melin High Performance - 8 Pg
http://slidepdf.com/reader/full/melin-high-performance-8-pg 8/8
Melin Tool Company, Inc. 5565 Venture Drive • Cleveland, OH 44130
Phone: 216.362.4200 / Toll Free 800.521.1078 Fax: 216.362.4230 / Toll Free 800.521.1558
SERIES PAGE
ALMG
ELMG
AMG40CCMG40
EMG35
EMG60
GMG
AMG35
CCMG35
VHMG
VXMG
VBMG
HMG
CCMG45
CRFMG
CRMG
Best Choice Secondary Option
4
4
4
5
5
5
2
2
2
2
3
3
3
5
5