Melin Catalog 2005

Intentionally left blank to reduce file size.

1

To Our Valued Customers,

Welcome to the 2005 edition of our catalog! In this edition, you will find many new tools in such areas as high performance carbide end mills, special use end mills, and many other cutting tools.

Additionally, we are proud to introduce a complete line of HSS, cobalt HSS, and carbide countersinks! In August 2004, Melin acquired Countersinks, Inc. The transi-tion to our new partnership was an easy one as Melin has produced most of Counter-sinks, Inc. tools over the last several years. Subsequently, our inventory of the nearly 1300 sizes and styles of countersinks is very good. See page 106 for:

- Zero Flute - Center Reamer - Single Flute - Drill Point Countersinks - 4 Flute - Machine Countersinks - 6 Flute - Combined Drill & Countersinks - NC Tolerance

As always, we will continue to provide high quality, American made tools to exceed the expectations of all of our customers. Tools are produced in our ISO 9001-2000 certified facility and are 100% guaranteed or we will replace them. Our helpful sales and support staff are here to answer your technical and general questions, provide you with additional tool and/or sales information, and to make your experience purchasing our tools as simple as possible.

Melin Tool wants to be your one source provider for all of your carbide end mill, HSS cobalt end mill, and countersink needs! Visit our website at www.endmill.com to learn more about all of our tools.

Mike WochnaMike Wochna, President Melin Tool Company

2

TABLE OF CONTENTSCARBIDE END MILLS

GENERAL PURPOSESQUARE ENDStd Length - 2 Flute AMG-___ 4Std Length - 4 Flute CCMG-___ 4Stub Length - 2 Flute, SE AMGS-___ 5Stub Length - 4 Flute, SE CCMGS-___ 5Med, Long, & XL Length - 2 Flute, SE AMG-___-M or-L or -E 6Med, Long, & XL Length - 4 Flute, SE CCMG-___-M or-L or -E 6Various Lengths - 3 Flute, SE EMG-___ or -L 7BALL ENDStd Length - 2 & 4 Flute, SE AMG-___-B or CCMG-___-B 8Stub Length - 2 & 4 Flute, SE AMGS-___-B or CCMGS-___-B 9Long & XL Length - 2 Flute, SE AMG-___-LB or -EB 10Long & XL Length - 4 Flute, SE CCMG-___-LB or -EB 10Various Lengths - 3 Flute, SE EMG-___-B or -LB 11DOUBLE SQUARE ENDStd Length - 2 & 4 Flute BMG-___ or DDMG-___ 12Stub Length - 2 & 4 Flute BSMG-___ or DDSMG-___ 12DOUBLE BALL ENDStd Length - 2 & 4 Flute, Ball End BMG-___-B or DDMG-___-B 13Stub Length - 2 & 4 Flute, Ball End BSMG-___-B or DDSMG-___-B 13

HIGH PERFORMANCEMVH Variable Helix - All Lengths VHMG-___ 1435 Deg Helix - Stub & Std Lengths EMGS35- or EMG35-___ 1545 Deg Helix - All Lengths GMG- or GMGS-___ 1645 Deg Helix for Hardened Steel CCMG45-___ 1760 Deg Helix EMG60-___ 17Aluminum Cutting - 2 Flute ALMGS-___ or ALMG-___ 18Aluminum Cutting - 3 Flute ELMG-___ 19MVB Spherical Ball End - 2 & 4 Flute VBMG2- or VBMG4-___ 20Diamond Coated End Mills AMG- or CCMG-___-DIA 20

SPECIAL USE END MILLSLong Reach - 2 & 4 Flute AMGN- or CCMGN-___ 21Long Reach - 2 & 4 Flute, Ball End AMGN- or CCMGN-___-B 21Miniature Decimal Sizes - 2 & 4 Flute AMG- or CCMG-___ 22Wood Routers, Up & Down Cut WRUMG-___ or WRDMG-___ 23NC Tolerance - 2 & 4 Flute AMG- or CCMG-___-NC 24NC Tolerance - 2 & 4 Flute, Ball End AMG- or CCMG-___-NCB 24Roughing End Mills CRMG-___ 25Corner Radius - 4 Flute, Stub Length CCMGS-___-R__ 25Corner Radius - 2 Flute AMG-___-R__ 26Corner Radius - 4 Flute CCMG-___-R__ 26Corner Rounding - 3 & 4 Flute, SE RMG- or RCMG-___ 27Corner Rounding - 2 Flute, DE BRMG-___ 27Drill Point - 2 & 4 Flute, 60, 82, & 90 Deg AMG-___-DP__ 28Straight Flute End Mills - 2 Flute SAMG-___ 29Chamfer Mills CMG2- or CMG4-___-__ 29Tapered End Mills - 3 Flute, Square EMG-___-__T 30Tapered End Mills - 3 Flute, Ball EMG-___-__TB 30Die Sinking - 3, 5, 7, 10 Deg Per Side AMGDS-___-__B 31

CARBIDE END MILLS cont.METRIC END MILLS

Metric / Inch - 2 & 4 Flute AMG- or CCMG-_M_ 32Metric - 2, 3, & 4 Flute AMG- or EMG- or CCMG-M_M_ 33Metric - 2, 3, & 4 Flute, Ball End AMG- or EMG- or CCMG-M_M_-B 34Metric - Corner Radius, 2 & 4 Flute AMG- or CCMG-___-R__ 35Metric - MVH Variable Helix VHMG-M_M_ 35Metric - Aluminum Cutting, 2 Flute ALMG-M_M_ 36Metric - Aluminum Cutting, 3 Flute ELMG-M_M_ 36Metric - MVB Spherical Ball End - 2 Flute VBMG2-M_M_ 36Metric - MVB Spherical Ball End - 4 Flute VBMG4-M_M_ 36

CARBIDE BLANKSCenterless Ground 5 Digit EDP 37Engraving Tool Blank - Single & DE 5 Digit EDP 37Conical Blanks, SE & DE 5 Digit EDP 38Half Round - Square, Conical, & Ball 5 Digit EDP 38

CARBIDE DRILLSFRACTIONAL, LETTER, WIRE, AND METRIC SIZES

Jobber Length HDR-___ 39-42Stub Length IDR-___ 43-46Straight Flute JDR-___ 47-50

SPECIAL DRILLSCombined Drill & Countersink KDR-___ 50NC Spotting Drills HDRNC-___ 51High Performance Drills - 3 Flute LDR-___ 52

CARBIDE THREAD MILLS60 Deg UN - Straight Flute TM-__-__-S 5360 Deg UN - Helical Flute TM-__-__-H 54NPT Pipe - Straight Flute TM-__-__NPT-S 55NPTF Pipe - Straight Flute TM-__-__NPTF-S 55NPT Pipe - Helical Flute TM-__-__NPT-H 55NPTF Pipe - Helical Flute TM-__-__NPTF-H 5560 Deg UN - Helical Flute, Metric TM-M__-__-H 56

HSS AND COBALT HSS END MILLSGENERAL PURPOSE

SINGLE END - 2 FLUTEMiniature A-___ 57Standard A- or AS- or AP-___ 57-60Keyway AK-___ 60Ball End A-___-B 61-62Aluminum AA-___ 63Aluminum Ball End AA-___-B 64Long Reach AN-___ 65Long Reach Ball End AN-___-B 65DOUBLE END - 2 FLUTEMiniature B- or BS-___ 66

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 3

HSS AND COBALT HSS END MILLS cont.Standard B- or BS-___ 67Miniature Ball End B-___-B 68Ball End B- or BS-___-B 68SINGLE END - MULTIPLE FLUTE (4+)Miniature C-___ 69Standard - Center Cutting CC- or CCS-___ 69-71Standard - Non Center Cutting C- or CS-___ 72-73Ball End CC-___-B 74Long Reach - Center Cutting CCN-___ 75Long Reach - Non-Center Cutting CN-___ 75Long Reach - Ball CCN-___-B 75DOUBLE END - MULTIPLE FLUTE (4+)Miniature D- or DS-___ 76Standard - Center Cutting DD- or DDS-___ 77Standard - Non Center Cutting D-___ 78Ball End DD-___-B 78SINGLE END - 3 FLUTE60 Deg E60-___ 78Standard E-___ 79-80Ball End E-___-B 80Long Reach EN-___ 81DOUBLE END - 3 FLUTEStandard F- or FS-___ 81Ball End F-___-B 82

SPECIAL USE END MILLS AND DRILLSLeft Hand - 2 &4 Flute, DE XB-___ or XD-___ 82Corner Rounding - 3 Flute R-___ 83Corner Rounding - 4 Flute RC-___ 84Corner Radius - 2 Flute A-___-R__ 85Corner Radius - 4 Flute CC-___-R__ 86Drill Point - 60, 82, 90, 100, & 120 Deg A-___-DP (angle) 87-88Angle Mills AM-___-(angle) 89NC Spotting Drill HSNC-___-(angle) 89

ROUGHING END MILLSCoarse Pitch - Non Center Cutting CRP- or CRPS-___ 90Coarse Pitch - Center Cutting CCRP- or CCRPS-___ 91Coarse Pitch - 3 Flute for Aluminum ERP- or ERPS-___ 92Fine Pitch - Non Center Cutting CFP- or CFPS-___ 93-94Fine Pitch - Center Cutting CCFP- or CCFPS-___ 94Fine Pitch - Center Cutting, Ball End CCFP-___-B 95Fine Pitch - 3 Flute for Aluminum EFP- or EFPS-___ 95Rougher/Finisher CRFP-___ 96Rougher/Finisher - 3 Flute for Alum ERFP-___ 96

METRIC END MILLSMetric / Inch - 2 Flute, SE AP-__M__ 97Metric / Inch - 4 Flute, SE CCP-__M__ 98Metric / Inch - 2 Flute, SE, Ball End AP-__M__-B 99Metric / Inch - 4 Flute, SE, Ball End CCP-___M__-B 99Metric / Inch - 2 & 4 Flute, DE B-__M__ or DD-__M__ 100Metric - 2 Flute, SE A-M__M__ 101

HSS AND COBALT HSS END MILLS cont.Metric - 4 Flute, SE CC- or C-M__M__ 102Metric - 2 Flute, SE, Ball End A-M__M__-B 103Metric - 4 Flute, SE, Ball End CC-M__M__-B 104Metric - 4 Flute, Fine Pitch Rougher CCFP-M__M__ 104

HIGH PERFORMANCE TOOL HOLDERSWeler Milling Chuck w/ Reduction Sleeves 105

COUNTERSINKSGENERAL PURPOSE

Zero Flute, Single Edge - HSS HS0- (size) - (angle) 106Zero Flute, Single Edge - Cobalt HSS HSP0- (size) - (angle) 106Single Flute - HSS HS1- (size) - (angle) 106Single Flute - Cobalt HSS (M42) HSP1- (size) - (angle) 107Single Flute, TiN Coated - Cobalt HSS HSP1- (size) - (angle)T 107Single Flute, DE - HSS DHS1- (size) - (angle) 107Single Flute - Carbide C1- (size) - (angle) 107Single Flute, DE - Carbide DC1- (size) - (angle) 1084 Flute - HSS HS4- (size) - (angle) 1084 Flute, DE - HSS DHS4- (size) - (angle) 1084 Flute - Carbide C4- (size) - (angle) 1094 Flute, DE - Carbide DC4- (size) - (angle) 1096 Flute - HSS HS6- (size) - (angle) 1096 Flute, DE - HSS DHS6- (size) - (angle) 1106 Flute, TiN Coated - Cobalt HSS HSP6- (size) - (angle)T 1106 Flute - Carbide C6- (size) - (angle) 1106 Flute, DE - Carbide DC6- (size) - (angle) 1116 Flute, NC - HSS HS6NC- (size) - (angle) 1116 Flute, NC - Carbide C6NC- (size) - (angle) 111

SPECIAL USE COUNTERSINKSCenter Reamer, 3 & 4 Flute - HSS HSCR- (size) - (angle) 111Drill Point, 4 Flute - HSS HS4DP- (size) - (angle) 112Drill Point, 4 Flute, DE - HSS DHS4DP- (size) - (angle) 112Drill Point, 4 Flute, DE - Carbide DC4DP- (size) - (angle) 112Machine CS, 4 Flute - HSS HSMC- (size) - (angle) 113Combined Drill & CS - HSS HSCD-(size) 113Combined Drill & CS - Carbide KDR-(size) 113

TECHNICAL INFORMATION 114

TABLE OF CONTENTS

4

Standard coatings are the same price. To order coated tools, add TiN, TiCN, or AlTiN after the tool name or change the fi rst digit of the EDP to 2 for TN, 4 for TiCN, or 5 for AlTiN.

GENERAL PURPOSE END MILLS2 AND 4 FLUTE, SINGLE ENDSTANDARD LENGTH, PLAIN SHANK* Used for general purpose milling in most materials of medium hard-ness such as steel, brass, iron, and non-ferrous materials.* Made from premium submicron grain carbide.

Tolerance +.000/-.002

2 FLUTE 4 FLUTE LIST COATEDTOOL NAME EDP TOOL NAME EDP MILL SHANK LOC OAL PRICE PRICE

AMG-401 14000 CCMG-401 14121 1/32 1/8 3/32 1-1/2 8.48 10.58AMG-401-1/2 14002 CCMG-401-1/2 14122 3/64 1/8 1/8 1-1/2 8.48 10.58AMG-402 14004 CCMG-402 14124 1/16 1/8 3/16 1-1/2 6.99 9.09AMG-402-1/2 14006 CCMG-402-1/2 14126 5/64 1/8 3/16 1-1/2 6.99 9.09AMG-403 14008 CCMG-403 14128 3/32 1/8 3/8 1-1/2 6.99 9.09AMG-403-1/2 14009 CCMG-403-1/2 14130 7/64 1/8 3/8 1-1/2 6.99 9.09AMG-404 14010 CCMG-404 14132 1/8 1/8 1/2 1-1/2 6.78 8.88AMG-604-1/2 15893 CCMG-604-1/2 14134 9/64 3/16 9/16 2 9.94 12.04AMG-605 14020 CCMG-605 14136 5/32 3/16 9/16 2 9.94 12.04AMG-605-1/2 15894 CCMG-605-1/2 15919 11/64 3/16 9/16 2 9.94 12.04AMG-606 14022 CCMG-606 14138 3/16 3/16 5/8 2 9.47 11.57AMG-806-1/2 15895 CCMG-806-1/2 15920 13/64 1/4 5/8 2-1/2 12.98 17.68AMG-807 14024 CCMG-807 14140 7/32 1/4 5/8 2-1/2 12.98 17.68AMG-807-1/2 15896 CCMG-807-1/2 15921 15/64 1/4 3/4 2-1/2 12.78 17.48AMG-808 14026 CCMG-808 14142 1/4 1/4 3/4 2-1/2 12.21 16.91AMG-1008-1/2 15897 CCMG-1008-1/2 15922 17/64 5/16 3/4 2-1/2 16.62 21.32AMG-1009 15898 CCMG-1009 14148 9/32 5/16 3/4 2-1/2 16.62 22.23AMG-1009-1/2 15899 CCMG-1009-1/2 15923 19/64 5/16 13/16 2-1/2 15.87 21.48AMG-1010 14032 CCMG-1010 14150 5/16 5/16 13/16 2-1/2 15.87 21.48AMG-1210-1/2 16119 CCMG-1210-1/2 16197 21/64 3/8 7/8 2-1/2 21.70 27.31AMG-1211 15900 CCMG-1211 15924 11/32 3/8 7/8 2-1/2 19.94 25.55AMG-1211-1/2 16120 CCMG-1211-1/2 16198 23/64 3/8 7/8 2-1/2 21.70 27.31AMG-1212 14034 CCMG-1212 14152 3/8 3/8 1 2-1/2 18.27 23.88AMG-1412-1/2 16121 CCMG-1412-1/2 16199 25/64 7/16 1 2-3/4 27.97 34.30AMG-1413 15901 CCMG-1413 15925 13/32 7/16 1 2-3/4 26.97 33.31AMG-1413-1/2 16122 CCMG-1413-1/2 16200 27/64 7/16 1 2-3/4 27.97 34.30AMG-1414 14040 CCMG-1414 14158 7/16 7/16 1 2-3/4 25.90 32.23AMG-1614-1/2 16123 CCMG-1614-1/2 16201 29/64 1/2 1 3 35.90 42.24AMG-1615 15902 CCMG-1615 15926 15/32 1/2 1 3 34.72 41.06AMG-1615-1/2 16124 CCMG-1615-1/2 16202 31/64 1/2 1 3 35.90 42.24AMG-1616 14042 CCMG-1616 14160 1/2 1/2 1 3 30.73 37.06AMG-1817 11515 CCMG-1817 16785 17/32 9/16 1-1/4 3-1/2 57.88 67.69AMG-1818 15903 CCMG-1818 15927 9/16 9/16 1-1/4 3-1/2 53.40 63.21AMG-2020 14048 CCMG-2020 14166 5/8 5/8 1-1/4 3-1/2 57.88 67.69AMG-2424 14050 CCMG-2424 14168 3/4 3/4 1-1/2 4 87.50 103.52AMG-2828 16125 CCMG-2828 16203 7/8 7/8 1-1/2 4 137.86 155.16AMG-3232 14054 CCMG-3232 14172 1 1 1-1/2 4 133.85 151.14

CA

RB

IDE

EN

D M

ILLS

- G

EN

ER

AL

PU

RP

OS

E

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 5


GENERAL PURPOSE END MILLS2 AND 4 FLUTE, SINGLE END STUB LENGTH, PLAIN SHANK* High rigidity and minimal tool defl ection due to the short fl ute length.* Used for general purpose milling in most materials of medium hard-ness such as steel, brass, iron, and non-ferrous materials.* Made from premium submicron grain carbide.



AMGS-401 16146 CCMGS-401 16224 1/32 1/8 1/16 1-1/2 8.85 10.95AMGS-401-1/2 16147 CCMGS-401-1/2 16225 3/64 1/8 3/32 1-1/2 8.47 10.57AMGS-402 16148 CCMGS-402 16226 1/16 1/8 1/8 1-1/2 7.16 9.26AMGS-402 -1/2 11517 CCMGS-402-1/2 16595 5/64 1/8 1/8 1-1/2 6.99 9.09AMGS-403 16149 CCMGS-403 16227 3/32 1/8 3/16 1-1/2 6.96 9.06AMGS-404 16150 CCMGS-404 16228 1/8 1/8 1/4 1-1/2 6.47 8.57AMGS-605 16151 CCMGS-605 16229 5/32 3/16 5/16 1-1/2 9.16 11.26AMGS-606 16152 CCMGS-606 16230 3/16 3/16 3/8 1-1/2 8.61 10.71AMGS-807 16153 CCMGS-807 16231 7/32 1/4 1/2 2 10.87 14.21AMGS-808 16154 CCMGS-808 16232 1/4 1/4 1/2 2 10.15 13.49AMGS-1010 16155 CCMGS-1010 16233 5/16 5/16 1/2 2 15.08 19.93AMGS-1212 16156 CCMGS-1212 16234 3/8 3/8 5/8 2 18.53 23.37AMGS-1414 16157 CCMGS-1414 16235 7/16 7/16 5/8 2-1/2 24.20 30.53AMGS-1616 16158 CCMGS-1616 16236 1/2 1/2 5/8 2-1/2 29.96 36.30AMGS-2020 16159 CCMGS-2020 16237 5/8 5/8 3/4 3 56.44 66.26AMGS-2424 16160 CCMGS-2424 16238 3/4 3/4 1 3 82.60 94.96

CA

RB

IDE

EN

D M

ILLS - G

EN

ER

AL P

UR

PO

SE

6


GENERAL PURPOSE END MILLS2 AND 4 FLUTE, SINGLE END, PLAIN SHANK MEDIUM, LONG, & EXTRA LONG LENGTH* Used for general purpose milling for deep pocket milling and long reach applications.* Used for general purpose milling in most materials of medium hardness such as steel, brass, iron, and non-ferrous materials.* Made from premium submicron grain carbide.



AMG-402-L 11521 CCMG-402-L 17860 1/16 1/8 3/8 1-1/2 15.11 17.62AMG-403-L 16060 CCMG-403-L 16186 3/32 1/8 9/16 3 15.11 17.62AMG-404-M 11523 CCMG-404-M 11489 1/8 1/8 5/8 2 9.89 12.39AMG-404-L 16061 CCMG-404-L 16071 1/8 1/8 3/4 3 10.23 12.73AMG-404-E 16062 CCMG-404-E 16072 1/8 1/8 1 3 12.99 15.49AMG-605-L 16063 CCMG-605-L 16187 5/32 3/16 3/4 3 16.61 19.12AMG-606-L 16064 CCMG-606-L 16073 3/16 3/16 3/4 3 12.82 15.33AMG-606-E 16065 CCMG-606-E 16074 3/16 3/16 1-1/8 3 14.33 16.84AMG-808-L 14028 CCMG-808-L 14144 1/4 1/4 1-1/8 3 16.19 20.89AMG-808-E 14030 CCMG-808-E 14146 1/4 1/4 1-1/2 4 19.64 24.34AMG-1010-L 16066 CCMG-1010-L 16075 5/16 5/16 1-1/8 3 18.05 23.66AMG-1010-E 16027 CCMG-1010-E 16076 5/16 5/16 1-5/8 4 24.49 31.37AMG-1212-L 14036 CCMG-1212-L 14154 3/8 3/8 1-1/8 3 25.64 31.25AMG-1212-E 14038 CCMG-1212-E 14156 3/8 3/8 1-3/4 4 29.57 36.45

- - CCMG-1212-EE 17735 3/8 3/8 3 6 48.13 61.91AMG-1414-L 16029 CCMG-1414-L 16077 7/16 7/16 2 4 40.14 48.48AMG-1414-E 16028 CCMG-1414-E 16078 7/16 7/16 3 6 53.75 67.53AMG-1616-M 11529 CCMG-1616-M 16466 1/2 1/2 1-1/4 3 31.64 39.98AMG-1616-L 14044 CCMG-1616-L 14162 1/2 1/2 2 4 38.71 47.05AMG-1616-E 14046 CCMG-1616-E 14164 1/2 1/2 3 6 60.29 74.08AMG-2020-L 16067 CCMG-2020-L 16079 5/8 5/8 2-1/4 5 76.93 92.33AMG-2020-E 16068 CCMG-2020-E 16080 5/8 5/8 3 6 91.40 106.80AMG-2424-L 16069 CCMG-2424-L 16081 3/4 3/4 2-1/4 5 113.90 130.65AMG-2424-E 14052 CCMG-2424-E 14170 3/4 3/4 3 6 143.87 172.12

- - CCMG-2424-EE 17736 3/4 3/4 4 7 209.07 242.41AMG-3232-E 14056 CCMG-3232-E 14174 1 1 3 6 248.40 281.74

- - CCMG-3232-EE 16315 1 1 4 7 335.34 368.68

CA

RB

IDE

EN

D M

ILLS

- G

EN

ER

AL

PU

RP

OS

E

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 7


GENERAL PURPOSE END MILLS3 FLUTE, SINGLE END, PLAIN SHANK VARIOUS LENGTHS, CENTER CUTTING* 3 fl ute design will usually allow feed rates 50% faster than 2 fl ute tools.* Used for general purpose milling in most materials of medium hardness such as steel, brass, iron, and non-ferrous materials.* Made from premium submicron grain carbide.


3 FLUTE LIST COATEDTOOL NAME EDP MILL SHANK LOC OAL PRICE PRICE

EMGS-401 17791 1/32 1/8 1/16 1-1/2 8.85 10.95EMG-401 17792 1/32 1/8 3/32 1-1/2 6.99 9.09EMGS-401-1/2 17793 3/64 1/8 3/32 1-1/2 8.48 10.58EMG-401-1/2 17794 3/64 1/8 1/8 1-1/2 6.99 9.09EMGS-402 17795 1/16 1/8 1/8 1-1/2 7.16 9.26EMG-402 17638 1/16 1/8 3/16 1-1/2 6.99 9.09EMG-402-1/2 17796 5/64 1/8 3/16 1-1/2 6.99 9.09EMGS-403 17797 3/32 1/8 3/16 1-1/2 6.96 9.06EMG-403 17639 3/32 1/8 3/8 1-1/2 6.99 9.09EMG-403-1/2 17798 7/64 1/8 3/8 1-1/2 6.78 8.88EMGS-404 17799 1/8 1/8 1/4 1-1/2 6.47 8.57EMG-404 17640 1/8 1/8 1/2 1-1/2 6.78 8.88EMG-404-L 17800 1/8 1/8 3/4 3 10.23 12.73EMG-605 17641 5/32 3/16 9/16 2 9.94 12.04EMGS-606 17801 3/16 3/16 3/8 1-1/2 8.61 10.71EMG-606 17642 3/16 3/16 5/8 2 9.47 11.57EMG-606-L 17802 3/16 3/16 3/4 3 12.82 15.33EMGS-808 17803 1/4 1/4 1/2 2 10.15 13.50EMG-808 17644 1/4 1/4 3/4 2-1/2 12.21 16.91EMG-808-L 17804 1/4 1/4 1-1/8 3 16.19 20.89EMGS-1010 17805 5/16 5/16 1/2 2 15.08 19.92EMG-1010 17646 5/16 5/16 13/16 2-1/2 15.87 21.48EMG-1010-L 17806 5/16 5/16 1-1/8 3 18.05 23.66EMGS-1212 17807 3/8 3/8 5/8 2 18.53 23.37EMG-1212 17648 3/8 3/8 1 2-1/2 18.27 23.88EMG-1212-L 17808 3/8 3/8 1-1/8 3 25.64 31.25EMG-1414 17650 7/16 7/16 1 2-3/4 25.90 32.23EMGS-1616 17809 1/2 1/2 5/8 2-1/2 29.96 36.30EMG-1616 17652 1/2 1/2 1 3 30.73 37.06EMG-1616-L 17810 1/2 1/2 2 4 38.71 47.05EMGS-2020 17811 5/8 5/8 3/4 3 56.45 66.26EMG-2020 17654 5/8 5/8 1-1/4 3-1/2 57.88 67.69EMG-2020-L 17812 5/8 5/8 2-1/4 5 76.93 92.33EMG-2424 17655 3/4 3/4 1-1/2 4 87.50 103.52EMG-2424-L 11189 3/4 3/4 2-1/4 5 113.90 130.65EMG-3232 11191 1 1 1-1/2 4 133.85 151.14

CA

RB

IDE

EN

D M

ILLS - G

EN

ER

AL P

UR

PO

SE

8


GENERAL PURPOSE END MILLS2 AND 4 FLUTE, BALL END STANDARD LENGTH* Use for radius and contouring part surfaces.* Designed to cut materials ranging from nickel base alloy, stainless, tough alloys, abrasive and non-ferrous.* Made from premium submicron grain carbide.



AMG-401-B 15904 CCMG-401-B 15928 1/32 1/8 3/32 1-1/2 10.17 12.28AMG-401-1/2-B 15905 CCMG-401-1/2-B 15929 3/64 1/8 1/8 1-1/2 10.17 12.28AMG-402-B 15906 CCMG-402-B 15930 1/16 1/8 3/16 1-1/2 8.38 10.48AMG-402-1/2-B 15907 CCMG-402-1/2-B 15931 5/64 1/8 3/16 1-1/2 8.38 10.48AMG-403-B 15908 CCMG-403-B 15932 3/32 1/8 3/8 1-1/2 8.38 10.48AMG-403-1/2-B 15909 CCMG-403-1/2-B 15933 7/64 1/8 3/8 1-1/2 8.38 10.48AMG-404-B 14058 CCMG-404-B 14176 1/8 1/8 1/2 1-1/2 8.38 10.48AMG-604-1/2-B 16126 CCMG-604-1/2-B 16204 9/64 3/16 9/16 2 11.92 14.02AMG-605-B 15910 CCMG-605-B 15852 5/32 3/16 9/16 2 11.92 14.02AMG-605-1/2-B 16127 CCMG-605-1/2-B 16205 11/64 3/16 9/16 2 11.92 14.02AMG-606-B 14060 CCMG-606-B 14178 3/16 3/16 5/8 2 11.92 14.02AMG-806-1/2-B 16128 CCMG-806-1/2-B 16206 13/64 1/4 5/8 2-1/2 15.72 20.42AMG-807-B 15911 CCMG-807-B 15934 7/32 1/4 5/8 2-1/2 15.72 20.42AMG-807-1/2-B 16129 CCMG-807-1/2-B 16207 15/64 1/4 3/4 2-1/2 15.72 20.42AMG-808-B 14062 CCMG-808-B 14180 1/4 1/4 3/4 2-1/2 15.03 19.73AMG-1008-1/2-B 16130 CCMG-1008-1/2-B 16208 17/64 5/16 3/4 2-1/2 19.95 25.56AMG-1009-B 15912 CCMG-1009-B 15935 9/32 5/16 3/4 2-1/2 19.94 25.55AMG-1009-1/2-B 16131 CCMG-1009-1/2-B 16209 19/64 5/16 13/16 2-1/2 19.95 25.56AMG-1010-B 14064 CCMG-1010-B 14182 5/16 5/16 13/16 2-1/2 18.76 24.37AMG-1210-1/2-B 16132 CCMG-1210-1/2-B 16210 21/64 3/8 7/8 2-1/2 28.10 33.71AMG-1211-B 16133 CCMG-1211-B 16211 11/32 3/8 7/8 2-1/2 28.10 33.71AMG-1211-1/2-B 16134 CCMG-1211-1/2-B 16212 23/64 3/8 7/8 2-1/2 28.10 33.71AMG-1212-B 14066 CCMG-1212-B 14184 3/8 3/8 1 2-1/2 22.53 28.14AMG-1412-1/2-B 16135 CCMG-1412-1/2-B 16213 25/64 7/16 1 2-3/4 34.57 40.90AMG-1413-B 16136 CCMG-1413-B 16214 13/32 7/16 1 2-3/4 34.57 40.90AMG-1413-1/2-B 16137 CCMG-1413-1/2-B 16215 27/64 7/16 1 2-3/4 34.57 40.90AMG-1414-B 15913 CCMG-1414-B 15936 7/16 7/16 1 2-3/4 31.82 38.15AMG-1614-1/2-B 16138 CCMG-1614-1/2-B 16216 29/64 1/2 1 3 49.52 55.86AMG-1615-B 16139 CCMG-1615-B 16217 15/32 1/2 1 3 49.52 55.86AMG-1615-1/2-B 16140 CCMG-1615-1/2-B 16218 31/64 1/2 1 3 49.52 55.86AMG-1616-B 14068 CCMG-1616-B 14186 1/2 1/2 1 3 37.99 44.33AMG-1818-B 16141 CCMG-1818-B 16219 9/16 9/16 1-1/4 3-1/2 65.31 75.12AMG-2020-B 16142 CCMG-2020-B 16220 5/8 5/8 1-1/4 3-1/2 72.50 82.31AMG-2424-B 16143 CCMG-2424-B 16221 3/4 3/4 1-1/2 4 106.71 122.73AMG-2828-B 16144 CCMG-2828-B 16222 7/8 7/8 1-1/2 4 170.88 188.17AMG-3232-B 16145 CCMG-3232-B 16223 1 1 1-1/2 4 185.06 202.35

CA

RB

IDE

EN

D M

ILLS

- G

EN

ER

AL

PU

RP

OS

E

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 9


GENERAL PURPOSE END MILLS2 AND 4 FLUTE, BALL END STUB LENGTH* High rigidity and minimal tool defl ection due to the short fl ute length.* Use for radius and contouring part surfaces.* Designed to cut materials ranging from nickel base alloy, stainless, tough alloys, abrasive and non-ferrous.* Made from premium submicron grain carbide.



AMGS-401-B 16161 CCMGS-401-B 16239 1/32 1/8 1/16 1-1/2 11.20 13.30AMGS-401-1/2-B 16162 CCMGS-401-1/2-B 16240 3/64 1/8 3/32 1-1/2 10.16 12.26AMGS-402-B 16163 CCMGS-402-B 16241 1/16 1/8 1/8 1-1/2 7.91 10.01AMGS-403-B 16164 CCMGS-403-B 16242 3/32 1/8 3/16 1-1/2 7.60 9.70AMGS-404-B 16165 CCMGS-404-B 16243 1/8 1/8 1/4 1-1/2 7.27 9.37AMGS-605-B 16166 CCMGS-605-B 16244 5/32 3/16 5/16 1-1/2 10.99 13.09AMGS-606-B 16167 CCMGS-606-B 16245 3/16 3/16 3/8 1-1/2 10.33 12.43AMGS-807-B 16168 CCMGS-807-B 16246 7/32 1/4 1/2 2 12.47 15.81AMGS-808-B 16169 CCMGS-808-B 16247 1/4 1/4 1/2 2 12.19 15.53AMGS-1010-B 16170 CCMGS-1010-B 16248 5/16 5/16 1/2 2 18.09 22.94AMGS-1212-B 16171 CCMGS-1212-B 16249 3/8 3/8 5/8 2 22.24 27.08AMGS-1414-B 16172 CCMGS-1414-B 16250 7/16 7/16 5/8 2-1/2 28.84 35.17AMGS-1616-B 16173 CCMGS-1616-B 16251 1/2 1/2 5/8 2-1/2 34.90 41.23AMGS-2020-B 16174 CCMGS-2020-B 16252 5/8 5/8 3/4 3 67.73 77.54AMGS-2424-B 16175 CCMGS-2424-B 16253 3/4 3/4 1 3 99.12 111.48

CA

RB

IDE

EN

D M

ILLS - G

EN

ER

AL P

UR

PO

SE

10


GENERAL PURPOSE END MILLS2 AND 4 FLUTE, BALL END LONG & EXTRA LONG LENGTH* Longer fl ute lengths for deep pocket milling and longer reach.* Made from premium submicron grain carbide.


GENERAL PURPOSE END MILLS2 AND 4 FLUTE, BALL END LONG & EXTRA LONG LENGTH* Longer fl ute lengths for deep pocket milling and longer reach.* Made from premium submicron grain carbide.


- - CCMG-402-MB 11205 1/16 1/8 1/4 1-1/2 8.80 11.30AMG-404-LB 16110 CCMG-404-LB 16188 1/8 1/8 3/4 3 13.77 16.27AMG-404-EB 16176 CCMG-404-EB 16254 1/8 1/8 1 3 19.04 21.55AMG-606-LB 16111 CCMG-606-LB 16189 3/16 3/16 3/4 3 21.00 23.51AMG-606-EB 16177 CCMG-606-EB 16255 3/16 3/16 1-1/8 3 21.00 23.51AMG-808-LB 16112 CCMG-808-LB 16190 1/4 1/4 1-1/8 3 24.31 29.01AMG-808-EB 16178 CCMG-808-EB 16256 1/4 1/4 1-1/2 4 25.58 30.28AMG-1010-LB 16113 CCMG-1010-LB 16191 5/16 5/16 1-1/8 3 30.03 35.64AMG-1010-EB 16179 CCMG-1010-EB 16257 5/16 5/16 1-5/8 4 33.52 40.40AMG-1212-LB 16114 CCMG-1212-LB 16192 3/8 3/8 1-1/8 3 33.79 39.40AMG-1212-EB 16180 CCMG-1212-EB 16258 3/8 3/8 1-3/4 4 37.09 43.97AMG-1414-LB 16115 CCMG-1414-LB 16193 7/16 7/16 2 4 51.05 59.39AMG-1414-EB 16181 CCMG-1414-EB 16259 7/16 7/16 3 6 66.35 80.13AMG-1616-LB 16116 CCMG-1616-LB 16194 1/2 1/2 2 4 52.14 60.48AMG-1616-EB 16182 CCMG-1616-EB 16260 1/2 1/2 3 6 73.85 87.64AMG-2020-LB 16117 CCMG-2020-LB 16195 5/8 5/8 2-1/4 5 104.54 119.94AMG-2020-EB 16183 CCMG-2020-EB 16261 5/8 5/8 3 6 113.85 129.25AMG-2424-LB 16118 CCMG-2424-LB 16196 3/4 3/4 2-1/4 5 171.81 188.56AMG-2424-EB 16184 CCMG-2424-EB 16262 3/4 3/4 3 6 186.30 214.56AMG-3232-EB 16185 CCMG-3232-EB 16263 1 1 3 6 303.03 336.36

CA

RB

IDE

EN

D M

ILLS

- G

EN

ER

AL

PU

RP

OS

E

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 11


GENERAL PURPOSE END MILLS3 FLUTE, BALL END VARIOUS LENGTHS* Use for radius and contouring part surfaces.* 3 fl utes will usually allow feed rates 50% faster than 2 fl utes.* Used for general purpose milling of most materials of medium hard-ness such as steel, brass, iron, and non-ferrous material.* Made from premium submicron grain carbide.


3 FLUTE LIST COATEDTOOL NAME EDP MILL SHANK LOC OAL PRICE PRICE

EMGS-401-B 17814 1/32 1/8 1/16 1-1/2 11.20 13.30EMG-401-B 17815 1/32 1/8 3/32 1-1/2 10.17 12.28EMGS-401-1/2-B 17816 3/64 1/8 3/32 1-1/2 10.16 12.26EMG-401-1/2-B 17817 3/64 1/8 1/8 1-1/2 10.17 12.28EMGS-402-B 17818 1/16 1/8 1/8 1-1/2 7.91 10.01EMG-402-B 17819 1/16 1/8 3/16 1-1/2 8.38 10.48EMG-402-1/2-B 17820 5/64 1/8 3/16 1-1/2 6.99 9.09EMGS-403-B 17821 3/32 1/8 3/16 1-1/2 7.60 9.70EMG-403-B 17822 3/32 1/8 3/8 1-1/2 8.38 10.48EMG-403-1/2-B 17823 7/64 1/8 3/8 1-1/2 8.38 10.48EMGS-404-B 17824 1/8 1/8 1/4 1-1/2 7.27 9.37EMG-404-B 17825 1/8 1/8 1/2 1-1/2 8.38 10.48EMG-404-LB 17826 1/8 1/8 3/4 3 13.77 16.27EMG-605-B 17827 5/32 3/16 9/16 2 11.92 14.02EMGS-606-B 17828 3/16 3/16 5/16 1-1/2 10.33 12.43EMG-606-B 17829 3/16 3/16 5/8 2 11.92 14.02EMG-606-LB 17830 3/16 3/16 3/4 3 21.00 23.50EMGS-808-B 17831 1/4 1/4 1/2 2 12.18 15.53EMG-808-B 17832 1/4 1/4 3/4 2-1/2 15.03 19.73EMG-808-LB 17833 1/4 1/4 1-1/8 3 24.31 29.01EMGS-1010-B 17834 5/16 5/16 1/2 2 18.09 22.94EMG-1010-B 17835 5/16 5/16 13/16 2-1/2 18.76 24.37EMG-1010-LB 17836 5/16 5/16 1-1/8 3 30.04 35.65EMGS-1212-B 17837 3/8 3/8 5/8 2 22.24 27.09EMG-1212-B 17838 3/8 3/8 1 2-1/2 22.53 28.14EMG-1212-LB 17839 3/8 3/8 1-1/8 3 33.79 39.40EMG-1414-B 17840 7/16 7/16 1 2-3/4 31.82 38.15EMGS-1616-B 17841 1/2 1/2 5/8 2-1/2 34.90 41.23EMG-1616-B 17842 1/2 1/2 1 3 37.99 44.33EMG-1616-LB 17843 1/2 1/2 2 4 52.14 60.49EMGS-2020-B 17844 5/8 5/8 3/4 3 67.73 77.54EMG-2020-B 17845 5/8 5/8 1-1/4 3-1/2 72.50 82.31EMG-2020-LB 17846 5/8 5/8 2-1/4 5 104.54 119.94EMG-2424-B 17847 3/4 3/4 1-1/2 4 106.71 122.73EMG-3232-B 11397 1 1 1-1/2 4 185.06 202.35

CA

RB

IDE

EN

D M

ILLS - G

EN

ER

AL P

UR

PO

SE

12


CA

RB

IDE

EN

D M

ILLS

- G

EN

ER

AL

PU

RP

OS

E GENERAL PURPOSE END MILLS2 AND 4 FLUTE, DOUBLE END STANDARD LENGTH WITH FLAT*** Used for general purpose milling in most materials of medium hardness such as steel, brass, iron, and non-ferrous materials.* Made from premium submicron grain carbide.



** BMG-404 16070 ** DDMG-404 16321 1/8 1/8 3/8 2 10.29 12.39 BMG-1204 14082 DDMG-1204 14200 1/8 3/8 3/8 3-1/16 26.83 33.71 BMG-1206 14090 DDMG-1206 14206 3/16 3/8 1/2 3-1/4 25.84 32.73 BMG-1207 11581 DDMG-1207 11583 1/4 3/8 5/8 3-1/2 31.41 38.30 BMG-1208 14096 DDMG-1208 14212 1/4 3/8 5/8 3-1/2 31.41 38.30 BMG-1209 15914 DDMG-1209 15937 9/32 3/8 11/16 3-1/2 33.07 39.95 BMG-1210 14100 DDMG-1210 14216 5/16 3/8 3/4 3-1/2 34.28 41.16 BMG-1212 14104 DDMG-1212 14220 3/8 3/8 3/4 3-1/2 35.76 42.64 BMG-1616 14108 DDMG-1616 14224 1/2 1/2 1 4 53.46 64.51

** No fl at on 1/8” shank tools.

GENERAL PURPOSE END MILLS2 AND 4 FLUTE, DOUBLE END STUB LENGTH* Used for general purpose milling in most materials of medium hardness such as steel, brass, iron, and non-ferrous materials.* Short fl ute length. High rigidity and minimal tool defl ection.* Made from premium submicron grain carbide.



BSMG-401 14070 DDSMG-401 14188 1/32 1/8 1/16 1-1/2 13.40 15.50BSMG-401-1/2 14072 DDSMG-401-1/2 14190 3/64 1/8 3/32 1-1/2 13.40 15.50BSMG-402 14074 DDSMG-402 14192 1/16 1/8 1/8 1-1/2 11.18 13.28BSMG-402-1/2 14076 DDSMG-402-1/2 14194 5/64 1/8 1/8 1-1/2 11.18 13.28BSMG-403 14078 DDSMG-403 14196 3/32 1/8 3/16 1-1/2 11.18 13.28BSMG-403-1/2 17848 DDSMG-403-1/2 17853 7/64 1/8 1/4 1-1/2 11.18 13.28BSMG-404 14080 DDSMG-404 14198 1/8 1/8 1/4 1-1/2 8.96 11.06BSMG-604-1/2 17849 DDSMG-604-1/2 17854 9/64 3/16 5/16 2 12.40 14.50BSMG-605 14084 DDSMG-605 14202 5/32 3/16 5/16 2 12.40 14.50BSMG-605-1/2 16319 DDSMG-605-1/2 17855 11/64 3/16 3/8 2 12.40 14.50BSMG-606 14086 DDSMG-606 14204 3/16 3/16 3/8 2 12.40 14.50BSMG-806-1/2 17850 DDSMG-806-1/2 17856 13/64 1/4 1/2 2-1/2 15.45 20.15BSMG-807 14092 DDSMG-807 14208 7/32 1/4 1/2 2-1/2 15.45 20.15BSMG-807-1/2 16320 DDSMG-807-1/2 17857 15/64 1/4 1/2 2-1/2 15.45 20.15BSMG-808 14094 DDSMG-808 14210 1/4 1/4 1/2 2-1/2 15.45 20.15BSMG-1010 14098 DDSMG-1010 14214 5/16 5/16 1/2 2-1/2 20.91 26.52BSMG-1212 14102 DDSMG-1212 14218 3/8 3/8 9/16 2-1/2 23.05 28.66BSMG-1414 15915 DDSMG-1414 15938 7/16 7/16 5/8 3 32.59 40.79BSMG-1616 14106 DDSMG-1616 14222 1/2 1/2 5/8 3 41.65 49.85BSMG-2020 17851 DDSMG-2020 17858 5/8 5/8 3/4 4 80.74 90.55BSMG-2424 17852 DDSMG-2424 17859 3/4 3/4 1 4 107.33 123.35

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 13


CA

RB

IDE

EN

D M

ILLS - G

EN

ER

AL P

UR

PO

SE

GENERAL PURPOSE END MILLS2 AND 4 FLUTE, DOUBLE END STANDARD LENGTH, BALL END WITH FLAT* Used for radius and contouring part surfaces.* Designed to cut materials such as stainless, tough alloys, abrasive, and non-ferrous.* Made from premium submicron grain carbide.



BMG-1204-B 16271 DDMG-1204-B 16264 1/8 3/8 3/8 3-1/16 32.19 39.07BMG-1206-B 16272 DDMG-1206-B 16265 3/16 3/8 1/2 3-1/4 31.01 37.89BMG-1207-B 16317 DDMG-1207-B 16318 7/32 3/8 5/8 3-1/2 37.32 44.20BMG-1208-B 16273 DDMG-1208-B 16266 1/4 3/8 5/8 3-1/2 37.31 44.19BMG-1209-B 16274 DDMG-1209-B 16267 9/32 3/8 11/16 3-1/2 43.37 50.25BMG-1210-B 16275 DDMG-1210-B 16268 5/16 3/8 3/4 3-1/2 42.12 49.01BMG-1212-B 16276 DDMG-1212-B 16269 3/8 3/8 3/4 3-1/2 42.90 49.78BMG-1616-B 16277 DDMG-1616-B 16270 1/2 1/2 1 4 64.15 75.20

GENERAL PURPOSE END MILLS2 AND 4 FLUTE, DOUBLE END STUB LENGTH, BALL END* Used for radius and contouring part surfaces.* Designed to cut materials such as stainless, tough alloys, abrasive, and non-ferrous.* Made from premium submicron grain carbide.



BSMG-404-B 14110 DDSMG-404-B 14226 1/8 1/8 1/4 1-1/2 10.49 12.94BSMG-605-B 15916 DDSMG-605-B 15939 5/32 3/16 5/16 2 14.88 17.33BSMG-606-B 14112 DDSMG-606-B 14228 3/16 3/16 3/8 2 14.88 17.33BSMG-807-B 15917 DDSMG-807-B 15940 7/32 1/4 1/2 2-1/2 18.55 23.25BSMG-808-B 14114 DDSMG-808-B 14230 1/4 1/4 1/2 2-1/2 18.55 23.25BSMG-1010-B 14116 DDSMG-1010-B 14232 5/16 5/16 1/2 2-1/2 25.09 30.70BSMG-1212-B 14118 DDSMG-1212-B 14234 3/8 3/8 9/16 2-1/2 27.67 33.28BSMG-1414-B 15918 DDSMG-1414-B 15941 7/16 7/16 5/8 3 39.11 47.31BSMG-1616-B 14120 DDSMG-1616-B 14236 1/2 1/2 5/8 3 47.87 56.07

14


MVH SERIES - VARIABLE HELIX 4 FLUTES, ALL LENGTHS* Helix changes along fl utes.* Increased stability during cutting action.* Substantial increases in speed.* Small corner radius for added strength and smoother cutting action.* AlTiN coated for improved tool life and increased production output.* Made from premium submicron grain carbide.


COATEDTOOL NAME EDP RADIUS MILL SHANK LOC OAL PRICE

VHMG-404 10813 .010-.015 1/8 1/8 1/2 1-1-2 12.82VHMG-606 10981 .015-.020 3/16 3/16 5/8 2 17.60VHMGS-808 10003 .015-.020 1/4 1/4 1/2 2 20.81VHMG-808 10005 .015-.020 1/4 1/4 3/4 2-1/2 25.78VHMG-808-L 10007 .015-.020 1/4 1/4 1-1/8 3 32.81VHMGS-1010 10009 .015-.020 5/16 5/16 1/2 2 30.94VHMG-1010 10011 .015-.020 5/16 5/16 13/16 2-1/2 31.85VHMG-1010-L 10013 .015-.020 5/16 5/16 1-1/8 3 35.52VHMGS-1212 10015 .015-.020 3/8 3/8 5/8 2 36.02VHMG-1212 10017 .015-.020 3/8 3/8 1 2-1/2 36.32VHMG-1212-L 10019 .015-.020 3/8 3/8 1-1/8 3 49.29VHMG-1414 10021 .015-.020 7/16 7/16 1 2-3/4 49.37VHMGS-1616 10023 .025-.030 1/2 1/2 5/8 2-1/2 56.79VHMG-1616 10025 .025-.030 1/2 1/2 1 3 57.73VHMG-1616-L 10027 .025-.030 1/2 1/2 2 4 71.62VHMGS-2020 10029 .030-.035 5/8 5/8 3/4 3 100.33VHMG-2020 10031 .030-.035 5/8 5/8 1-1/4 3-1/2 106.50VHMG-2020-L 10033 .030-.035 5/8 5/8 2-1/4 5 139.50VHMGS-2424 10035 .030-.035 3/4 3/4 1 3 151.13VHMG-2424 10037 .030-.035 3/4 3/4 1-1/2 4 161.97VHMG-2424-L 10039 .030-.035 3/4 3/4 2-1/4 5 202.07VHMG-3232 10985 .030-.035 1 1 1-1/2 4 236.46

Be sure to check out our high performance milling chucks on page 105! MVH speed and feed information can be found on page 115.

CA

RB

IDE

EN

D M

ILLS

- H

IGH

PE

RFO

RM

AN

CE

14

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 15


3 FLUTE, 35 DEGREE HELIX STANDARD & STUB LENGTHS* Special helix for diffi cult to machine materials such as stainless or inconel.* Made from premium submicron grain carbide.


STANDARD LENGTH

STUB LENGTH

CA

RB

IDE

EN

D M

ILLS - H

IGH

PE

RFO

RM

AN

CE

COATED LISTTOOL NAME EDP RADIUS MILL SHANK LOC OAL PRICE PRICE

EMG35-404 16709 .008-.010 1/8 1/8 1/2 1-1/2 12.19 14.29EMG35-605 17722 .008-.010 5/32 3/16 9/16 2 16.30 18.40EMG35-606 17723 .008-.010 3/16 3/16 9/16 2 15.50 17.61EMG35-807 17724 .015-.020 7/32 1/4 3/4 2-1/2 19.45 24.15EMG35-808 16702 .015-.020 1/4 1/4 3/4 2-1/2 18.39 23.09EMG35-1010 17727 .015-.020 5/16 5/16 13/16 2-1/2 23.76 29.37EMG35-1212 17729 .015-.020 3/8 3/8 1 2-1/2 27.01 32.62EMG35-1414 17730 .015-.020 7/16 7/16 1 2-3/4 35.41 41.74EMG35-1616 16708 .030-.035 1/2 1/2 1-1/4 3 43.87 50.20EMG35-2020 17732 .030-.035 5/8 5/8 1-5/8 3-1/2 81.77 91.58EMG35-2424 17733 .030-.035 3/4 3/4 1-5/8 4 122.45 138.47

COATED LISTTOOL NAME EDP RADIUS MILL SHANK LOC OAL PRICE PRICE

EMGS35-404 17658 .008-.010 1/8 1/8 1/4 1-1/2 12.19 14.29EMGS35-605 17659 .008-.010 5/32 3/16 5/16 2 16.30 18.40EMGS35-606 17660 .008-.010 3/16 3/16 5/16 2 15.50 17.61EMGS35-807 17661 .015-.020 7/32 1/4 3/8 2 18.77 23.47EMGS35-808 17662 .015-.020 1/4 1/4 3/8 2 17.72 22.42EMGS35-1010 17664 .015-.020 5/16 5/16 7/16 2 22.56 28.17EMGS35-1212 17666 .015-.020 3/8 3/8 1/2 2 26.36 31.97EMGS35-1414 17667 .015-.020 7/16 7/16 9/16 2-1/2 34.14 40.48EMGS35-1616 17668 .030-.035 1/2 1/2 5/8 2-1/2 42.67 49.01EMGS35-2020 17669 .030-.035 5/8 5/8 3/4 3 78.29 88.10EMGS35-2424 17670 .030-.035 3/4 3/4 1 3 111.15 127.17

16


5 FLUTE, 45 DEGREE HELIX STANDARD, STUB, & LONG LENGTHS* Five fl ute design provides excellent cutting performance at faster feed rates.* Smooth cutting action in tough to machine material with excellent chip ejection.* Made from premium submicron grain carbide.


STUB LENGTH

STANDARD LENGTH

LONG LENGTH

LIST COATEDTOOL NAME EDP MILL SHANK LOC OAL PRICE PRICE

GMG-404 15942 1/8 1/8 1/2 1-1/2 8.91 11.01GMG-605 15943 5/32 3/16 9/16 2 12.66 14.76GMG-606 15944 3/16 3/16 9/16 2 12.54 14.65GMG-807 15945 7/32 1/4 3/4 2-1/2 15.92 20.62GMG-808 15946 1/4 1/4 3/4 2-1/2 15.68 20.38GMG-1010 15948 5/16 5/16 13/16 2-1/2 19.46 25.07GMG-1212 15949 3/8 3/8 1 2-1/2 24.47 30.08GMG-1414 15951 7/16 7/16 1 2-3/4 33.09 39.42GMG-1616 15952 1/2 1/2 1-1/4 3 39.83 46.16GMG-1818 15954 9/16 9/16 1-1/4 3-1/2 63.29 73.10GMG-2020 15955 5/8 5/8 1-1/4 3-1/2 71.11 80.93GMG-2424 15956 3/4 3/4 1-1/2 4 104.67 120.69GMG-3232 15958 1 1 1-1/2 4 179.41 196.70


GMGS-404 17698 1/8 1/8 1/4 1-1/2 8.80 10.90GMGS-605 17699 5/32 3/16 5/16 2 12.47 14.57GMGS-606 17700 3/16 3/16 5/16 2 12.32 14.42GMGS-807 17701 7/32 1/4 3/8 2 15.13 18.47GMGS-808 17702 1/4 1/4 3/8 2 13.98 17.33GMGS-1010 17703 5/16 5/16 7/16 2 17.56 22.41GMGS-1212 17704 3/8 3/8 1/2 2 21.02 25.86GMGS-1413 10739 13/32 7/16 9/16 2-1/2 38.11 44.44GMGS-1414 17705 7/16 7/16 9/16 2-1/2 27.68 34.01GMGS-1616 17706 1/2 1/2 5/8 2-1/2 32.98 39.31GMGS-2020 17707 5/8 5/8 3/4 3 67.51 77.32GMGS-2424 17708 3/4 3/4 1 3 91.81 104.18GMGS-3232 17709 1 1 1-1/4 3 146.66 163.95


GMG-808-E 15947 1/4 1/4 1-1/2 4 25.53 30.23GMG-1212-E 15950 3/8 3/8 1-3/4 4 40.29 47.18GMG-1616-E 15953 1/2 1/2 3 6 82.27 96.06GMG-2020-E 11203 5/8 5/8 3 6 111.37 126.77GMG-2424-E 15957 3/4 3/4 3 6 176.40 204.65GMG-3232-E 15959 1 1 3 6 289.40 322.73

CA

RB

IDE

EN

D M

ILLS

- H

IGH

PE

RFO

RM

AN

CE

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 17


3 FLUTE, 60 DEGREE HELIX STANDARD LENGTH* Used for stainless and high temperature alloy materials.* High helix provides excellent sheering action.* Made from premium submicron grain carbide.


6 FLUTE, 45 DEGREE HELIX WITH RADIUS FOR HARDENED STEEL* AlTiN coated for increased tool life.* For material over 50Rc.* Increased core diameter for added strength.* Use for light fi nishing cuts.* Made from premium ultrafi ne grain carbide.


CA

RB

IDE

EN

D M

ILLS - H

IGH

PE

RFO

RM

AN

CE


CCMG45-404 16794 .010 1/8 1/8 1/2 1-1/2 14.36CCMG45-606 16786 .010 3/16 3/16 5/8 2 19.14CCMG45-808 16787 .015 1/4 1/4 3/4 2-1/2 27.69CCMG45-1010 16788 .020 5/16 5/16 13/16 2-1/2 34.16CCMG45-1212 16789 .020 3/8 3/8 1 2-1/2 38.96CCMG45-1616 16790 .025 1/2 1/2 1 3 61.79CCMG45-2020 16791 .030 5/8 5/8 1-1/4 3-1/2 113.87CCMG45-2424 16792 .035 3/4 3/4 1-1/2 4 173.24CCMG45-3232 16793 .035 1 1 1-1/2 4 256.61


EMG60-606 10797 3/16 3/16 5/8 2 11.42 16.75EMG60-808 14238 1/4 1/4 3/4 2-1/2 15.11 19.81EMG60-1010 14240 5/16 5/16 13/16 2-1/2 19.91 25.52EMG60-1212 14242 3/8 3/8 1 2-1/2 24.50 30.11EMG60-1414 14246 7/16 7/16 1 3 33.12 39.45EMG60-1616 14248 1/2 1/2 1 3 40.65 46.99EMG60-1818 14250 9/16 9/16 1-1/4 3-1/2 87.77 97.58EMG60-2020 14252 5/8 5/8 1-1/4 3-1/2 75.82 85.64EMG60-2424 14254 3/4 3/4 1-1/2 4 103.28 119.30EMG60-3232 14256 1 1 1-1/2 4 165.25 182.54

18


2 FLUTE FOR ALUMINUM STANDARD & LONG LENGTHS* Special geometry allows for high chip loads and feed rates.* Excellent for slotting and profi ling at high speeds.* Made from premium submicron grain carbide.


STANDARD LENGTH

LONG LENGTH

These tools are available with ZrN and other specialty coatings. See inside back cover for more coating information.

CA

RB

IDE

EN

D M

ILLS

- H

IGH

PE

RFO

RM

AN

CE

STUB LENGTH WITH REDUCED NECK FOR REACH

LIST COATEDTOOL NAME EDP RADIUS MILL SHANK LOC OAL PRICE PRICE

ALMG-404 17737 .010 1/8 1/8 3/8 1-1/2 8.16 10.26ALMG-606 17739 .010 3/16 3/16 5/8 2 11.42 13.52ALMG-808 17741 .010 1/4 1/4 3/4 2-1/2 14.73 19.43ALMG-1010 17743 .010 5/16 5/16 13/16 2-1/2 19.18 24.79ALMG-1212 17745 .015 3/8 3/8 1 2-1/2 22.06 27.67ALMG-1414 17747 .015 7/16 7/16 1 2-3/4 31.25 37.58ALMG-1616 17749 .020 1/2 1/2 1 3 37.06 43.40ALMG-2020 17751 .020 5/8 5/8 1-1/4 3-1/2 69.88 79.70ALMG-2424 17752 .030 3/4 3/4 1-1/2 4 106.19 122.21ALMG-3232 17754 .030 1 1 1-1/2 4 161.65 178.94

NECK LIST COATEDTOOL NAME EDP RADIUS MILL SHANK LOC LENGTH OAL PRICE PRICE

ALMGS-808 10837 .010 1/4 1/4 1/2 3/8 2-1/2 19.94 24.64ALMGS-1212 10839 .015 3/8 3/8 1/2 3/8 2-1/2 28.40 34.01ALMGS-1616 10841 .020 1/2 1/2 5/8 1/2 2-1/2 45.62 51.96ALMGS-2424 10843 .030 3/4 3/4 1 7/8 4 122.85 138.87


ALMG-808-L 17755 .010 1/4 1/4 1-1/8 3 19.18 23.88ALMG-1010-L 17756 .010 5/16 5/16 1-1/8 3 21.41 27.02ALMG-1212-L 17757 .015 3/8 3/8 1-1/8 3 30.43 36.04ALMG-1616-L 17759 .020 1/2 1/2 2 4 45.91 54.25ALMG-2020-L 17760 .020 5/8 5/8 2-1/4 5 91.29 106.69ALMG-2424-L 17761 .030 3/4 3/4 2-1/4 5 134.76 151.50ALMG-3232-L 17762 .030 1 1 2-1/4 5 199.42 224.74

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 19


3 FLUTE FOR ALUMINUM STANDARD LENGTH* Excellent for slotting and profi ling at high speeds.


STANDARD LENGTH

MEDIUM AND LONG LENGTH


ELMG-404 17764 .005 1/8 1/8 3/8 1-1/2 8.16 10.26ELMG-606 17766 .005 3/16 3/16 5/8 2 11.42 13.52ELMG-808 17768 .005 1/4 1/4 3/4 2-1/2 14.73 19.43ELMG-1010 17770 .005 5/16 5/16 13/16 2-1/2 19.18 24.79ELMG-1212 17772 .005 3/8 3/8 1 2-1/2 22.06 27.67ELMG-1414 17774 .005 7/16 7/16 1 2-3/4 31.25 37.58ELMG-1616 17776 .005 1/2 1/2 1-1/4 3 37.06 43.40ELMG-2020 17778 .005 5/8 5/8 1-5/8 3-1/2 69.88 79.70ELMG-2424 17779 .005 3/4 3/4 1-5/8 4 105.63 121.65ELMG-3232 17781 .005 1 1 1-1/2 4 161.65 178.94

CA

RB

IDE

EN

D M

ILLS - H

IGH

PE

RFO

RM

AN

CE

These tools are available with ZrN and other specialty coatings. See inside back cover for more coating information.


ELMG-808-L 17782 .005 1/4 1/4 1-1/8 3 19.18 23.88ELMG-1010-L 17783 .005 5/16 5/16 1-1/8 3 21.41 27.02ELMG-1212-L 17784 .005 3/8 3/8 1-1/8 3 30.43 36.04ELMG-1616-M 10811 .005 1/2 1/2 1-1/2 4 45.91 54.25ELMG-1616-L 17786 .005 1/2 1/2 2 4 45.91 54.25ELMG-2020-L 17787 .005 5/8 5/8 2-1/4 5 91.29 106.69ELMG-2424-L 17788 .005 3/4 3/4 2-1/4 5 134.76 151.50ELMG-3232-L 17789 .005 1 1 2-1/4 5 199.42 224.74

20


MVB SERIES - SPHERICAL BALL END2 AND 4 FLUTE* AlTiN coated for increased tool life.* High performance ball nose plus end mills are used in the mold industry and have a full 220 degree arc cutting capability. * Tools are stocked with a coating to optimize cutting performance.* Made from premium submicron grain carbide.


2 AND 4 FLUTE, STANDARD LENGTH

2 AND 4 FLUTE, LONG LENGTH

2 AND 4 FLUTE, SQUARE END

2 AND 4 FLUTE, BALL END

DIAMOND COATED END MILLS* High performance CVD diamond coated tools are used to machine graphite and other non-ferrous materials.* Typically extend tool life by 10 to 25 times over uncoated tools when cutting various non-metallic materials. * A special carbide substrate is used to insure proper diamond adhesion to the tool.* Made from premium submicron grain carbide.

CA

RB

IDE

EN

D M

ILLS

- H

IGH

PE

RFO

RM

AN

CE

2 FLUTE 4 FLUTE COATEDTOOL NAME EDP TOOL NAME EDP MILL SHANK LOC OAL PRICE

VBMG2-404 10041 VBMG4-404 10051 1/8 1/8 3/32 1-1/2 14.45VBMG2-606 10043 VBMG4-606 10053 3/16 3/16 9/64 2 18.01VBMG2-808 10045 VBMG4-808 10055 1/4 1/4 3/16 2-1/2 26.05VBMG2-1212 10047 VBMG4-1212 10057 3/8 3/8 9/32 2-1/2 36.83VBMG2-1616 10049 VBMG4-1616 10059 1/2 1/2 3/8 3 53.80


VBMG2-404-L 10321 VBMG4-404-L 10331 1/8 1/8 3/32 3 15.99VBMG2-606-L 10323 VBMG4-606-L 10333 3/16 3/16 9/64 3 20.03VBMG2-808-L 10325 VBMG4-808-L 10335 1/4 1/4 3/16 4 28.51VBMG2-1212-L 10327 VBMG4-1212-L 10337 3/8 3/8 9/32 4 40.88VBMG2-1616-L 10329 VBMG4-1616-L 10339 1/2 1/2 3/8 6 77.21


AMG-401-DIA 10093 CCMG-401-DIA 10061 1/32 1/8 3/32 1-1/2 100.45AMG-402-DIA 10095 CCMG-402-DIA 10063 1/16 1/8 3/16 1-1/2 90.39AMG-403-DIA 10097 CCMG-403-DIA 10065 3/32 1/8 3/8 1-1/2 90.39AMG-404-DIA 10099 CCMG-404-DIA 10067 1/8 1/8 1/2 1-1/2 90.39AMG-606-DIA 10101 CCMG-606-DIA 10069 3/16 3/16 5/8 2 128.86AMG-808-DIA 10103 CCMG-808-DIA 10071 1/4 1/4 3/4 2-1/2 149.37AMG-1010-DIA 10105 CCMG-1010-DIA 10073 5/16 5/16 13/16 2-1/2 183.18AMG-1212-DIA 10107 CCMG-1212-DIA 10075 3/8 3/8 1 2-1/2 229.73


AMG-401-B-DIA 10109 CCMG-401-B-DIA 10077 1/32 1/8 3/32 1-1/2 110.66AMG-402-B-DIA 10111 CCMG-402-B-DIA 10079 1/16 1/8 3/16 1-1/2 100.45AMG-403-B-DIA 10113 CCMG-403-B-DIA 10081 3/32 1/8 3/8 1-1/2 100.45AMG-404-B-DIA 10115 CCMG-404-B-DIA 10083 1/8 1/8 1/2 1-1/2 100.45AMG-606-B-DIA 10117 CCMG-606-B-DIA 10085 3/16 3/16 5/8 2 139.39AMG-808-B-DIA 10119 CCMG-808-B-DIA 10087 1/4 1/4 3/4 2-1/2 160.15AMG-1010-B-DIA 10121 CCMG-1010-B-DIA 10089 5/16 5/16 13/16 2-1/2 190.66AMG-1212-B-DIA 10123 CCMG-1212-B-DIA 10091 3/8 3/8 1 2-1/2 241.22

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 21

LONG REACH2 AND 4 FLUTE* Neck diameter reduced by .020 for clearance.* Used to mill deep pockets or slots where long fl ute lengths are not needed. The solid neck area provides reach with maxi-mum rigidity.* Made from premium submicron grain carbide.

Tolerance +.000/-.002.

are not needed. The solid neck area provides reach with maxi-mum rigidity.* Made from premium submicron grain carbide.


2 AND 4 FLUTE* Neck diameter reduced by .020 for clearance.* Used to mill deep pockets or slots where long fl ute lengths are not needed. The solid neck area provides reach with maxi-

→Neck Diameter Reduction

CA

RB

IDE

EN

D M

ILLS - S

PE

CIA

L US

E

2 FLUTE 4 FLUTE NECK LIST COATEDTOOL NAME EDP TOOL NAME EDP MILL SHANK LOC OAL LENGTH PRICE PRICEAMGN-404 16713 CCMGN-404 16731 1/8 1/8 5/8 2 3/8 10.28 12.78AMGN-606 16714 CCMGN-606 16732 3/16 3/16 1 3 5/8 14.33 16.84AMGN-606-2 16715 CCMGN-606-2 16733 3/16 3/16 1 4 1-5/8 19.31 22.19AMGN-808 16716 CCMGN-808 16734 1/4 1/4 1 4 1-1/4 21.15 25.84AMGN-808-2 16717 CCMGN-808-2 16735 1/4 1/4 1-1/2 6 2-3/4 28.95 34.38AMGN-1010 16718 CCMGN-1010 16736 5/16 5/16 1 4 1-5/16 28.93 35.81AMGN-1010-2 16719 CCMGN-1010-2 16737 5/16 5/16 1-1/2 6 2-13/16 41.41 49.34AMGN-1212 16720 CCMGN-1212 16738 3/8 3/8 1 4 1-3/8 30.38 37.26AMGN-1212-2 16721 CCMGN-1212-2 16739 3/8 3/8 1-1/2 6 2-7/8 45.04 52.96AMGN-1414 16722 CCMGN-1414 16740 7/16 7/16 1 4 1-1/4 42.17 50.51AMGN-1414-2 16723 CCMGN-1414-2 16741 7/16 7/16 1-1/2 6 2-3/4 55.86 64.20AMGN-1616 16724 CCMGN-1616 16742 1/2 1/2 1 4 1 42.84 51.18AMGN-1616-2 16725 CCMGN-1616-2 16743 1/2 1/2 1-1/2 6 2-1/2 64.31 78.10AMGN-1818 16726 CCMGN-1818 16744 9/16 9/16 2 6 1-3/4 85.87 101.27AMGN-2020 16728 CCMGN-2020 16746 5/8 5/8 2 6 1-3/4 93.24 108.64AMGN-2424 16729 CCMGN-2424 16747 3/4 3/4 2 6 1-1/2 146.46 174.72AMGN-3232 16730 CCMGN-3232 16748 1 1 2 6 1-1/2 252.52 285.86

LONG REACH2 AND 4 FLUTE, BALL END* Neck diameter reduced by .020 for clearance.* Used to mill deep pockets or slots where long fl ute lengths are not needed. The solid neck area provides reach with maximum rigidity.


2 FLUTE 4 FLUTE NECK LIST COATEDTOOL NAME EDP TOOL NAME EDP MILL SHANK LOC OAL LENGTH PRICE PRICE

AMGN-404-B 16749 CCMGN-404-B 16767 1/8 1/8 5/8 2 3/8 12.02 14.52AMGN-606-B 16750 CCMGN-606-B 16768 3/16 3/16 1 3 5/8 20.51 23.02AMGN-606-2B 16751 CCMGN-606-2B 16769 3/16 3/16 1 4 1-5/8 22.16 25.04AMGN-808-B 16752 CCMGN-808-B 16770 1/4 1/4 1 4 1-1/4 25.08 29.78AMGN-808-2B 16753 CCMGN-808-2B 16771 1/4 1/4 1-1/2 6 2-3/4 32.60 38.04AMGN-1010-B 16754 CCMGN-1010-B 16772 5/16 5/16 1 4 1-5/16 32.87 39.75AMGN-1010-2B 16755 CCMGN-1010-2B 16773 5/16 5/16 1-1/2 6 2-13/16 48.74 56.67AMGN-1212-B 16756 CCMGN-1212-B 16774 3/8 3/8 1 4 1-3/8 36.05 42.93AMGN-1212-2B 16757 CCMGN-1212-2B 16775 3/8 3/8 1-1/2 6 2-7/8 50.40 58.32AMGN-1414-B 16758 CCMGN-1414-B 16776 7/16 7/16 1 4 1-1/4 50.20 58.54AMGN-1414-2B 16759 CCMGN-1414-2B 16777 7/16 7/16 1-1/2 6 2-3/4 65.04 73.38AMGN-1616-B 16760 CCMGN-1616-B 16778 1/2 1/2 1 4 1 50.85 59.19AMGN-1616-2B 16761 CCMGN-1616-2B 16779 1/2 1/2 1-1/2 6 2-1/2 71.98 85.77AMGN-1818-B 16762 CCMGN-1818-B 16780 9/16 9/16 2 6 1-3/4 101.01 116.41AMGN-2020-B 16764 CCMGN-2020-B 16782 5/8 5/8 2 6 1-3/4 106.43 121.83AMGN-2424-B 16765 CCMGN-2424-B 16783 3/4 3/4 2 6 1-1/2 174.46 202.72AMGN-3232-B 16766 CCMGN-3232-B 16784 1 1 2 6 1-1/2 296.85 330.19

22


4 FLUTE

2 FLUTE

Note: In between decimal sizes also available. For decimal sizes not shown, allow 2 weeks for delivery. Price will be the same as the next smaller size in the list (i.e. 2 fl ute .012 = $24.89).

MINIATURE END MILLS DECIMAL SIZES, 2 AND 4 FLUTE* Made from premium submicron grain carbide. Tolerance +.0005/-.0005

CA

RB

IDE

EN

D M

ILLS

- S

PE

CIA

L U

SE


AMG - .005 10615 .005 1/8 .015 1-1/2 38.35 40.45AMG - .010 10617 .010 1/8 .030 1-1/2 24.89 26.99AMG - .015 10619 .015 1/8 .045 1-1/2 21.53 23.63AMG - .020 10621 .020 1/8 .060 1-1/2 18.16 20.27AMG - .025 10623 .025 1/8 .075 1-1/2 16.82 18.92AMG - .030 10625 .030 1/8 .090 1-1/2 16.82 18.92AMG - .035 10627 .035 1/8 .105 1-1/2 16.82 18.92AMG - .040 10629 .040 1/8 .120 1-1/2 16.82 18.92AMG - .045 10631 .045 1/8 .135 1-1/2 14.80 16.90AMG - .050 10633 .050 1/8 .150 1-1/2 14.80 16.90AMG - .055 10635 .055 1/8 .165 1-1/2 14.80 16.90AMG - .060 10637 .060 1/8 .180 1-1/2 14.80 16.90AMG - .065 10639 .065 1/8 .195 1-1/2 14.80 16.90AMG - .070 10641 .070 1/8 .210 1-1/2 14.80 16.90AMG - .075 10643 .075 1/8 .225 1-1/2 14.80 16.90AMG - .080 10645 .080 1/8 .240 1-1/2 14.80 16.90AMG - .085 10647 .085 1/8 .255 1-1/2 14.80 16.90AMG - .090 10649 .090 1/8 .270 1-1/2 14.80 16.90AMG - .095 10651 .095 1/8 .285 1-1/2 14.80 16.90AMG - .100 10653 .100 1/8 .300 1-1/2 14.80 16.90


CCMG - .010 10655 .010 1/8 .030 1-1/2 32.96 35.07CCMG - .015 10657 .015 1/8 .045 1-1/2 22.20 24.30CCMG - .020 10659 .020 1/8 .060 1-1/2 22.20 24.30CCMG - .025 10661 .025 1/8 .075 1-1/2 22.20 24.30CCMG - .030 10663 .030 1/8 .090 1-1/2 18.84 20.94CCMG - .035 10665 .035 1/8 .105 1-1/2 18.84 20.94CCMG - .040 10667 .040 1/8 .120 1-1/2 18.84 20.94CCMG - .045 10669 .045 1/8 .135 1-1/2 18.84 20.94CCMG - .050 10671 .050 1/8 .150 1-1/2 16.82 18.92CCMG - .055 10673 .055 1/8 .165 1-1/2 16.82 18.92CCMG - .060 10675 .060 1/8 .180 1-1/2 16.82 18.92CCMG - .065 10677 .065 1/8 .195 1-1/2 16.82 18.92CCMG - .070 10679 .070 1/8 .210 1-1/2 16.15 18.25CCMG - .075 10681 .075 1/8 .225 1-1/2 16.15 18.25CCMG - .080 10683 .080 1/8 .240 1-1/2 16.15 18.25CCMG - .085 10685 .085 1/8 .255 1-1/2 16.15 18.25CCMG - .090 10687 .090 1/8 .270 1-1/2 16.15 18.25CCMG - .095 10689 .095 1/8 .285 1-1/2 16.15 18.25CCMG - .100 10691 .100 1/8 .300 1-1/2 16.15 18.25

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 23


WOOD ROUTER UP CUT, 2 FLUTE* Right hand spiral / Right hand cut* Made from premium submicron grain carbide. Tolerance +.000/-.002

WOOD ROUTER DOWN CUT, 2 FLUTE* Left hand spiral / Right hand cut* Made from premium submicron grain carbide. Tolerance +.000/-.002

Also available: Up-down compression cut routers and slow spiral routers for plastic. Call for pricing.

CA

RB

IDE

EN

D M

ILLS - S

PE

CIA

L US

E


WRUMG-404 10693 1/8 1/8 1/2 1-1/2 10.40 12.43WRUMG-804 10695 1/8 1/4 1/2 2-1/2 17.75 20.23WRUMG-806 10697 3/16 1/4 5/8 2-1/2 17.75 20.23WRUMG-808 10699 1/4 1/4 3/4 2-1/2 16.24 21.21WRUMG-808-L 10701 1/4 1/4 1-1/8 3 21.53 26.50WRUMG-1010 10703 5/16 5/16 13/16 2-1/2 21.62 27.62WRUMG-1212 10705 3/8 3/8 7/8 2-1/2 24.29 30.29WRUMG-1212-L 10707 3/8 3/8 1-1/4 3 34.09 40.10WRUMG-1616 10709 1/2 1/2 1 3 40.87 47.91WRUMG-1616-L 10711 1/2 1/2 2 4 51.49 60.60


WRDMG-404 10713 1/8 1/8 1/2 1-1/2 10.40 12.43WRDMG-804 10715 1/8 1/4 1/2 2-1/2 17.75 20.23WRDMG-806 10717 3/16 1/4 5/8 2-1/2 17.75 20.23WRDMG-808 10719 1/4 1/4 3/4 2-1/2 16.24 21.21WRDMG-808-L 10721 1/4 1/4 1-1/8 3 21.53 26.50WRDMG-1010 10723 5/16 5/16 13/16 2-1/2 21.62 27.62WRDMG-1212 10725 3/8 3/8 7/8 2-1/2 24.29 30.29WRDMG-1212-L 10727 3/8 3/8 1-1/4 3 34.09 40.10WRDMG-1616 10729 1/2 1/2 1 3 40.87 47.91WRDMG-1616-L 10731 1/2 1/2 2 4 51.49 60.60

24


NC TOLERANCE2 AND 4 FLUTE, SINGLE END * Special OD tolerance.* Made from premium submicron grain carbide.


CA

RB

IDE

EN

D M

ILLS

- S

PE

CIA

L U

SE


AMG-402-NC 16968 CCMG-402-NC 16983 1/16 1/8 3/16 1-1/2 8.69 10.90AMG-403-NC 16969 CCMG-403-NC 16984 3/32 1/8 3/8 1-1/2 8.69 10.90AMG-404-NC 16970 CCMG-404-NC 16985 1/8 1/8 1/2 1-1/2 8.69 10.90AMG-605-NC 16971 CCMG-605-NC 16986 5/32 3/16 9/16 2 12.23 14.43AMG-606-NC 16972 CCMG-606-NC 16987 3/16 3/16 5/8 2 12.23 14.43AMG-807-NC 16973 CCMG-807-NC 16988 7/32 1/4 5/8 2-1/2 15.76 20.69AMG-808-NC 16974 CCMG-808-NC 16989 1/4 1/4 3/4 2-1/2 15.76 20.69AMG-1009-NC 16975 CCMG-1009-NC 16990 9/32 5/16 3/4 2-1/2 20.38 26.27AMG-1010-NC 16976 CCMG-1010-NC 16991 5/16 5/16 13/16 2-1/2 20.38 26.27AMG-1212-NC 16977 CCMG-1212-NC 16992 3/8 3/8 1 2-1/2 23.64 29.53AMG-1414-NC 16978 CCMG-1414-NC 16993 7/16 7/16 1 2-3/4 33.15 39.80AMG-1616-NC 16979 CCMG-1616-NC 16994 1/2 1/2 1 3 39.39 46.05AMG-2020-NC 16980 CCMG-2020-NC 16995 5/8 5/8 1-1/4 3-1/2 74.17 84.47AMG-2424-NC 16981 CCMG-2424-NC 16996 3/4 3/4 1-1/2 4 112.21 129.03AMG-3232-NC 16982 CCMG-3232-NC 16997 1 1 1-1/2 4 171.43 189.59


AMG-402-NCB 16938 CCMG-402-NCB 16953 1/16 1/8 3/16 1-1/2 10.87 13.07AMG-403-NCB 16939 CCMG-403-NCB 16954 3/32 1/8 3/8 1-1/2 10.87 13.07AMG-404-NCB 16940 CCMG-404-NCB 16955 1/8 1/8 1/2 1-1/2 10.87 13.07AMG-605-NCB 16941 CCMG-605-NCB 16956 5/32 3/16 9/16 2 15.49 17.69AMG-606-NCB 16942 CCMG-606-NCB 16957 3/16 3/16 5/8 2 15.49 17.69AMG-807-NCB 16943 CCMG-807-NCB 16958 7/32 1/4 5/8 2-1/2 19.29 24.22AMG-808-NCB 16944 CCMG-808-NCB 16959 1/4 1/4 3/4 2-1/2 19.29 24.22AMG-1009-NCB 16945 CCMG-1009-NCB 16960 9/32 5/16 3/4 2-1/2 20.32 26.21AMG-1010-NCB 16946 CCMG-1010-NCB 16961 5/16 5/16 13/16 2-1/2 24.18 30.07AMG-1212-NCB 16947 CCMG-1212-NCB 16962 3/8 3/8 1 2-1/2 29.07 34.96AMG-1414-NCB 16948 CCMG-1414-NCB 16963 7/16 7/16 1 2-3/4 40.75 47.40AMG-1616-NCB 16949 CCMG-1616-NCB 16964 1/2 1/2 1 3 48.90 55.55AMG-2020-NCB 16950 CCMG-2020-NCB 16965 5/8 5/8 1-1/4 3-1/2 92.92 103.22AMG-2424-NCB 16951 CCMG-2424-NCB 16966 3/4 3/4 1-1/2 4 136.66 153.48AMG-3232-NCB 16952 CCMG-3232-NCB 16967 1 1 1-1/2 4 237.45 255.61

NC TOLERANCE2 AND 4 FLUTE, BALL END * Special OD tolerance.* Made from premium submicron grain carbide.


Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 25


CA

RB

IDE

EN

D M

ILLS - S

PE

CIA

L US

EROUGHING END MILLSMULTIPLE FLUTE, CENTER CUTTING* Form relieved on high strength carbide for excellent profi le milling.* Made from premium submicron grain carbide.


CORNER RADIUS END MILLS4 FLUTE, SINGLE ENDSTUB LENGTH * Used when a radius is permissable.* Radius gives added strength to corner to help prevent chipping.* Used for general purpose milling in most materials of medium hard-ness such as steel, brass, iron, and nonferrous materials.* Made from premium submicron grain carbide.

LIST COATEDTOOL NAME EDP MILL SHANK LOC OAL FLUTES PRICE PRICE

CRMG-808 15960 1/4 1/4 3/4 2-1/2 4 44.97 49.67CRMG-1010 15961 5/16 5/16 13/16 2-1/2 4 49.99 55.60CRMG-1212 15962 3/8 3/8 1 2-1/2 4 55.76 61.37CRMG-1616 15963 1/2 1/2 1-1/4 3 4 74.88 83.08CRMG-2020 15964 5/8 5/8 1-1/4 3-1/2 4 116.44 128.53CRMG-2424 15965 3/4 3/4 1-1/2 4 4 139.18 163.04CRMG-3232 15966 1 1 1-1/2 4 5 220.93 246.72


CCMGS-404-R010 16904 .010 1/8 1/8 1/4 1-1/2 8.67 10.77CCMGS-605-R010 16905 .010 5/32 3/16 5/16 2 12.79 14.89CCMGS-606-R010 16906 .010 3/16 3/16 5/16 2 11.47 13.57CCMGS-807-R020 16907 .020 7/32 1/4 3/8 2 14.22 17.56CCMGS-808-R020 16463 .020 1/4 1/4 1/2 2 13.51 16.85CCMGS-1010-R020 16909 .020 5/16 5/16 7/16 2 17.98 22.82CCMGS-1010-R030 16338 .030 5/16 5/16 1/2 2 18.76 23.61CCMGS-1212-R020 16910 .020 3/8 3/8 1/2 2 23.64 28.48CCMGS-1414-R020 16911 .020 7/16 7/16 9/16 2-1/2 34.93 41.27CCMGS-1616-R030 16912 .030 1/2 1/2 5/8 2-1/2 40.79 47.12CCMGS-2020-R030 16913 .030 5/8 5/8 3/4 3 71.85 81.66CCMGS-2424-R030 16914 .030 3/4 3/4 1 3 103.14 115.51CCMGS-3232-R030 16915 .030 1 1 1-1/4 3 171.40 188.69

26


CORNER RADIUS2 AND 4 FLUTE, SINGLE END * Used when a radius is permissable.* Made from premium submicron grain carbide.


CA

RB

IDE

EN

D M

ILLS

- S

PE

CIA

L U

SE

2 FLUTE 4 FLUTE LIST COATEDTOOL NAME EDP TOOL NAME EDP RADIUS MILL SHANK LOC OAL PRICE PRICE

- - CCMG-403-R010 11061 .010 3/32 1/8 3/8 1-1/2 8.98 11.08 - - CCMG-403-R015 11063 .015 3/32 1/8 3/8 1-1/2 8.98 11.08 - - CCMG-403-R020 11065 .020 3/32 1/8 3/8 1-1/2 8.98 11.08 - - CCMG-404-R010 11067 .010 1/8 1/8 1/2 1-1/2 8.98 11.08

AMG-404-R015 15300 CCMG-404-R015 15422 .015 1/8 1/8 1/2 1-1/2 8.98 11.08 - - CCMG-404-R020 11069 .020 1/8 1/8 1/2 1-1/2 8.98 11.08 - - CCMG-404-R030 11071 .030 1/8 1/8 1/2 1-1/2 8.98 11.08 - - CCMG-606-R010 11073 .010 3/16 3/16 5/8 2 12.33 14.43

AMG-606-R015 11551 CCMG-606-R015 11075 .015 3/16 3/16 5/8 2 12.33 14.43AMG-606-R020 15302 CCMG-606-R020 15424 .020 3/16 3/16 5/8 2 12.33 14.43AMG-606-R030 15304 CCMG-606-R030 15426 .030 3/16 3/16 5/8 2 12.33 14.43AMG-808-R015 16322 CCMG-808-R015 15360 .015 1/4 1/4 3/4 2-1/2 15.57 20.27AMG-808-R020 15306 CCMG-808-R020 15362 .020 1/4 1/4 3/4 2-1/2 15.57 20.27AMG-808-R030 15308 CCMG-808-R030 15364 .030 1/4 1/4 3/4 2-1/2 15.57 20.27AMG-808-R045 15310 CCMG-808-R045 15366 .045 1/4 1/4 3/4 2-1/2 15.57 20.27

- - CCMG-1010-R015 11077 .015 5/16 5/16 13/16 2-1/2 18.76 24.37AMG-1010-R020 15312 CCMG-1010-R020 15368 .020 5/16 5/16 13/16 2-1/2 18.76 24.37AMG-1010-R030 15314 CCMG-1010-R030 15370 .030 5/16 5/16 13/16 2-1/2 18.76 24.37AMG-1010-R045 15316 CCMG-1010-R045 15372 .045 5/16 5/16 13/16 2-1/2 18.76 24.37

- - CCMG-1010-R060 11079 .060 5/16 5/16 13/16 2-1/2 18.76 24.37 - - CCMG-1212-R015 11081 .015 3/8 3/8 1 2-1/2 23.38 28.99

AMG-1212-R020 15318 CCMG-1212-R020 15374 .020 3/8 3/8 1 2-1/2 23.38 28.99AMG-1212-R030 15320 CCMG-1212-R030 15376 .030 3/8 3/8 1 2-1/2 23.38 28.99AMG-1212-R045 15322 CCMG-1212-R045 15378 .045 3/8 3/8 1 2-1/2 23.38 28.99

- - CCMG-1212-R060 11083 .060 3/8 3/8 1 2-1/2 23.38 28.99 - - CCMG-1616-R015 11085 .015 1/2 1/2 1 3 41.56 47.89

AMG-1616-R020 15324 CCMG-1616-R020 15380 .020 1/2 1/2 1 3 41.56 47.89AMG-1616-R030 15326 CCMG-1616-R030 15382 .030 1/2 1/2 1 3 41.56 47.89AMG-1616-R045 15328 CCMG-1616-R045 15384 .045 1/2 1/2 1 3 41.56 47.89AMG-1616-R060 15330 CCMG-1616-R060 15386 .060 1/2 1/2 1 3 41.56 47.89

- - CCMG-1616-R090 11087 .090 1/2 1/2 1 3 41.56 47.89 - - CCMG-1616-R125 11089 .125 1/2 1/2 1 3 41.56 47.89 - - CCMG-2020-R015 11091 .015 5/8 5/8 1-1/4 3-1/2 73.28 83.09

AMG-2020-R020 15332 CCMG-2020-R020 15388 .020 5/8 5/8 1-1/4 3-1/2 73.28 83.09AMG-2020-R030 15334 CCMG-2020-R030 15390 .030 5/8 5/8 1-1/4 3-1/2 73.28 83.09AMG-2020-R045 15336 CCMG-2020-R045 15392 .045 5/8 5/8 1-1/4 3-1/2 73.28 83.09AMG-2020-R060 15338 CCMG-2020-R060 15394 .060 5/8 5/8 1-1/4 3-1/2 73.28 83.09AMG-2020-R090 15340 CCMG-2020-R090 15396 .090 5/8 5/8 1-1/4 3-1/2 73.28 83.09

- - CCMG-2424-R015 11093 .015 3/4 3/4 1-1/2 4 108.04 124.07AMG-2424-R020 15342 CCMG-2424-R020 15398 .020 3/4 3/4 1-1/2 4 108.04 124.07AMG-2424-R030 15344 CCMG-2424-R030 15400 .030 3/4 3/4 1-1/2 4 108.04 124.07AMG-2424-R045 15346 CCMG-2424-R045 15402 .045 3/4 3/4 1-1/2 4 108.04 124.07AMG-2424-R060 15348 CCMG-2424-R060 15404 .060 3/4 3/4 1-1/2 4 108.04 124.07AMG-2424-R090 15350 CCMG-2424-R090 15406 .090 3/4 3/4 1-1/2 4 108.04 124.07AMG-2424-R125 15352 CCMG-2424-R125 15408 .125 3/4 3/4 1-1/2 4 108.04 124.07

- - CCMG-3232-R015 11095 .015 1 1 1-1/2 4 189.62 206.92AMG-3232-R020 15354 CCMG-3232-R020 15410 .020 1 1 1-1/2 4 189.62 206.92AMG-3232-R030 15356 CCMG-3232-R030 15412 .030 1 1 1-1/2 4 189.62 206.92AMG-3232-R045 15358 CCMG-3232-R045 15414 .045 1 1 1-1/2 4 189.62 206.92AMG-3232-R060 15428 CCMG-3232-R060 15416 .060 1 1 1-1/2 4 189.62 206.92AMG-3232-R090 15430 CCMG-3232-R090 15418 .090 1 1 1-1/2 4 189.62 206.92AMG-3232-R125 15432 CCMG-3232-R125 15420 .125 1 1 1-1/2 4 189.62 206.92

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 27


CORNER ROUNDING3 AND 4 FLUTE, SINGLE END* Can provide uniform fi nish on corners.* Radius is form relieved.* Made from premium submicron grain carbide.

CA

RB

IDE

EN

D M

ILLS - S

PE

CIA

L US

E

3 FLUTE 4 FLUTE MINOR LIST COATEDTOOL NAME EDP TOOL NAME EDP RADIUS DIA. SHANK OAL PRICE PRICE

RMG-601 16092 RCMG-601 16099 1/32 1/8 3/16 2 14.73 16.83RMG-802 16093 RCMG-802 16100 1/16 1/8 1/4 2-1/2 20.21 24.91RMG-1203 16094 RCMG-1203 16101 3/32 3/16 3/8 2-1/2 32.81 38.42RMG-1604 16095 RCMG-1604 16102 1/8 1/4 1/2 3 47.09 53.43RMG-2005 16096 RCMG-2005 16103 5/32 5/16 5/8 3-1/2 69.72 79.54RMG-2406 16097 RCMG-2406 16104 3/16 3/8 3/4 4 102.37 118.39RMG-3208 16098 RCMG-3208 16105 1/4 1/2 1 4 165.47 182.77

CORNER ROUNDING2 FLUTE, DOUBLE END * Can provide uniform fi nish on corners.* Radius is form relieved.* Made from premium submicron grain carbide.

MINOR LIST COATEDTOOL NAME EDP RADIUS DIA. SHANK OAL PRICE PRICE

BRMG-4010-S 11178 0.010 0.047 1/8 1-1/2 19.82 21.82BRMG-4010 16293 0.010 0.105 1/8 1-1/2 19.82 21.82BRMG-4015-S 11179 0.015 0.047 1/8 1-1/2 19.82 21.82BRMG-4015 16294 0.015 0.095 1/8 1-1/2 19.82 21.82BRMG-4020-S 11181 0.020 0.047 1/8 1-1/2 19.82 21.82BRMG-4020 16295 0.020 0.085 1/8 1-1/2 19.82 21.82BRMG-4025 16296 0.025 0.075 1/8 1-1/2 19.82 21.82BRMG-4031-S 11182 0.031 0.047 1/8 1-1/2 19.82 21.82BRMG-4031 16297 0.031 0.063 1/8 1-1/2 19.82 21.82BRMG-4035 16298 0.035 0.055 1/8 1-1/2 19.82 21.82BRMG-4039 16299 0.039 0.047 1/8 1-1/2 19.82 21.82BRMG-6047-S 11183 0.047 0.047 3/16 2 25.38 27.48BRMG-6047 16300 0.047 0.094 3/16 2 25.38 27.48BRMG-6050 16301 0.050 0.088 3/16 2 25.38 27.48BRMG-6055 16302 0.055 0.078 3/16 2 25.38 27.48BRMG-6062-S 11185 0.062 0.047 3/16 2 25.38 27.48BRMG-6062 16303 0.062 0.064 3/16 2 25.38 27.48BRMG-8072 16304 0.072 0.106 1/4 2-1/2 25.38 30.08BRMG-8078-S 11186 0.078 0.047 1/4 2 30.07 34.77BRMG-8078 16305 0.078 0.094 1/4 2-1/2 30.07 34.77BRMG-8093 16306 0.093 0.064 1/4 2-1/2 30.07 34.77BRMG-8094-S 11187 0.094 0.047 1/4 2 30.07 34.77BRMG-8100 16307 0.100 0.050 1/4 2-1/2 30.07 34.77BRMG-10109 16308 0.109 0.095 5/16 2-1/2 32.55 38.16BRMG-10118 16309 0.118 0.077 5/16 2-1/2 32.55 38.16BRMG-10125 16310 0.125 0.063 5/16 2-1/2 32.55 38.16BRMG-12140 16311 0.140 0.095 3/8 2-1/2 41.78 47.39BRMG-12156 16312 0.156 0.063 3/8 2-1/2 41.78 47.39

28


DRILL POINT END MILLS2 AND 4 FLUTE, SINGLE END * Drill / Mills can be used for drilling, slotting, chamfering, and profi le milling.* Available in 60, 82, and 90 degree points.* Made from premium submicron grain carbide.* Also available in cobalt HSS (M42). See pages 87-88.


Tool names with “-1” have a .005” sharp point for groove milling.

DRILLING SPOTTING COUNTERSINK CHAMFERING SIDE MILLING

CA

RB

IDE

EN

D M

ILLS

- S

PE

CIA

L U

SE

60 DEGREE

90 DEGREE2 FLUTE 4 FLUTE ANGLE LIST COATED

TOOL NAME EDP TOOL NAME EDP DEGREE MILL SHANK LOC OAL PRICE PRICEAMG-402-DP 11623 CCMG-402-DP 11629 90 1/16 1/8 3/16 1-1/2 9.95 12.05AMG-403-DP 11625 CCMG-403-DP 11631 90 3/32 1/8 3/8 1-1/2 9.95 12.05AMG-404-DP 16083 CCMG-404-DP 11633 90 1/8 1/8 1/2 1-1/2 9.55 11.65AMG-404-DP-1 16703 - - 90 1/8 1/8 1/2 1-1/2 9.55 11.65AMG-606-DP 16084 CCMG-606-DP 11635 90 3/16 3/16 5/8 2 13.44 15.55AMG-606-DP-1 16704 - - 90 3/16 3/16 5/8 2 13.44 15.55AMG-808-DP 16085 CCMG-808-DP 11637 90 1/4 1/4 3/4 2-1/2 16.81 21.51AMG-808-DP-1 16712 - - 90 1/4 1/4 3/4 2-1/2 16.81 21.51AMG-1010-DP 16086 CCMG-1010-DP 11639 90 5/16 5/16 13/16 2-1/2 20.87 26.48AMG-1010-DP-1 16705 - - 90 5/16 5/16 13/16 2-1/2 20.87 26.48AMG-1212-DP 16087 CCMG-1212-DP 11640 90 3/8 3/8 1 2-1/2 26.23 31.84AMG-1212-DP-1 16462 - - 90 3/8 3/8 1 2-1/2 26.23 31.84AMG-1414-DP 16088 CCMG-1414-DP 11641 90 7/16 7/16 1 2-3/4 35.47 41.80AMG-1616-DP 16089 CCMG-1616-DP 11642 90 1/2 1/2 1 3 43.48 49.81AMG-1616-DP-1 16707 - - 90 1/2 1/2 1 3 43.48 49.81AMG-2020-DP 16090 CCMG-2020-DP 11643 90 5/8 5/8 1-1/4 3-1/2 83.09 92.90AMG-2020-DP-1 16706 - - 90 5/8 5/8 1-1/4 3-1/2 83.09 92.90AMG-2424-DP 16091 CCMG-2424-DP 11644 90 3/4 3/4 1-1/2 4 122.29 138.31

82 DEGREE

ANGLE LIST COATEDTOOL NAME EDP DEGREE MILL SHANK LOC OAL PRICE PRICE

AMG-404-DP60 11663 60 1/8 1/8 1/2 1-1/2 9.55 11.65AMG-808-DP60 11665 60 1/4 1/4 3/4 2-1/2 16.81 21.51AMG-1212-DP60 11667 60 3/8 3/8 1 2-1/2 26.23 31.84AMG-1616-DP60 11669 60 1/2 1/2 1 3 43.48 49.81

ANGLE LIST COATEDTOOL NAME EDP DEGREE MILL SHANK LOC OAL PRICE PRICE

AMG-808-DP82 16590 82 1/4 1/4 3/4 2-1/2 16.81 21.51AMG-1212-DP82 16591 82 3/8 3/8 1 2-1/2 26.23 31.84AMG-1616-DP82 16592 82 1/2 1/2 1 3 43.48 49.81AMG-2020-DP82 16593 82 5/8 5/8 1-1/4 3-1/2 83.09 92.90AMG-2424-DP82 16594 82 3/4 3/4 1-1/2 4 122.29 138.31

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 29


CA

RB

IDE

EN

D M

ILLS - S

PE

CIA

L US

ECHAMFER MILLS 2 AND 4 FLUTE, SINGLE END* Eliminate hand deburring operations and provide uniform fi nish.* Made from premium submicron grain carbide.


CMG2-808-60 16281 CMG4-808-60 16286 1/4 1/4 3/16 2-1/2 16.81 21.51CMG2-1212-60 16282 CMG4-1212-60 16287 3/8 3/8 5/16 2-1/2 26.23 31.84CMG2-1616-60 16283 CMG4-1616-60 16288 1/2 1/2 7/16 3 43.48 49.81CMG2-2424-60 11575 CMG4-2424-60 16289 3/4 3/4 5/8 4 122.29 134.65


CMG2-808-90 16284 CMG4-808-90 16290 1/4 1/4 1/8 2-1/2 16.81 21.51CMG2-1212-90 16278 CMG4-1212-90 16279 3/8 3/8 3/16 2-1/2 26.23 31.84CMG2-1616-90 16285 CMG4-1616-90 16291 1/2 1/2 1/4 3 43.48 49.81CMG2-2424-90 11577 CMG4-2424-90 16292 3/4 3/4 3/8 4 122.29 134.65

60 DEGREE

90 DEGREE


SAMG-402 11493 1/16 1/8 3/16 1-1/2 7.68 9.78SAMG-403 11495 3/32 1/8 9/32 1-1/2 7.68 9.78SAMG-404 11497 1/8 1/8 1/2 1-1/2 7.45 9.55SAMG-605 11499 5/32 3/16 1/2 2 10.93 13.03SAMG-606 11501 3/16 3/16 5/8 2 10.41 12.51SAMG-807 11503 7/32 1/4 5/8 2-1/2 14.27 18.97SAMG-808 11505 1/4 1/4 3/4 2-1/2 13.43 18.13SAMG-1010 11507 5/16 5/16 13/16 2-1/2 17.45 23.06SAMG-1212 11509 3/8 3/8 1 2-1/2 20.09 25.70SAMG-1414 11511 7/16 7/16 1 2-3/4 28.48 34.81SAMG-1616 11513 1/2 1/2 1 3 33.79 40.12

STRAIGHT FLUTE 2 FLUTE, SINGLE END* Made from premium submicron grain carbide.

30


TAPERED END MILLS3 FLUTE, SINGLE END * Made from premium submicron grain carbide.


SQUARE END

BALL END

CA

RB

IDE

EN

D M

ILLS

- S

PE

CIA

L U

SE

TAPER / TIP LIST COATEDTOOL NAME EDP SIDE DIA. SHANK LOC OAL PRICE PRICE

EMG-804-1T 10257 1° 1/8 1/4 1-1/2 3 23.70 28.40EMG-1206-1T 10259 1° 3/16 3/8 1-3/4 3-1/2 35.66 42.54EMG-804-1.5T 10261 1° 30’ 1/8 1/4 1-1/2 3 24.37 29.07EMG-1206-1.5T 10263 1° 30’ 3/16 3/8 1-3/4 3-1/2 37.02 43.90EMG-804-2T 10265 2° 1/8 1/4 1 3 23.70 28.40EMG-1206-2T 10267 2° 3/16 3/8 1-3/4 3-1/2 35.66 42.54EMG-1608-2T 10269 2° 1/4 1/2 2 4 49.63 57.97EMG-804-3T 10271 3° 1/8 1/4 1 3 24.37 29.07EMG-1205-3T 10273 3° 5/32 3/8 1-3/4 3-1/2 37.02 43.90EMG-1608-3T 10275 3° 1/4 1/2 2 4 49.63 57.97EMG-804-5T 10277 5° 1/8 1/4 3/4 3 24.37 29.07EMG-1204-5T 10279 5° 1/8 3/8 1-1/2 3-1/2 37.02 43.90EMG-1608-5T 10281 5° 1/4 1/2 1-1/4 4 49.63 57.97EMG-804-7T 10283 7° 1/8 1/4 1/2 3 24.37 29.07EMG-1205-7T 10285 7° 5/32 3/8 3/4 3-1/2 37.02 43.90EMG-1606-7T 10287 7° 3/16 1/2 1-1/4 4 49.63 57.97

TAPER / TIP LIST COATEDTOOL NAME EDP SIDE DIA. SHANK LOC OAL PRICE PRICE

EMG-804-1TB 10289 1° 1/8 1/4 1-1/2 3 27.26 31.96EMG-1206-1TB 10291 1° 3/16 3/8 1-3/4 3-1/2 41.01 47.89EMG-804-1.5TB 10293 1° 30’ 1/8 1/4 1-1/2 3 28.03 32.73EMG-1206-1.5TB 10295 1° 30’ 3/16 3/8 1-3/4 3-1/2 42.58 49.46EMG-804-2TB 10297 2° 1/8 1/4 1 3 27.26 31.96EMG-1206-2TB 10299 2° 3/16 3/8 1-3/4 3-1/2 41.01 47.89EMG-1608-2TB 10301 2° 1/4 1/2 2 4 57.07 65.41EMG-804-3TB 10303 3° 1/8 1/4 1 3 28.03 32.73EMG-1205-3TB 10305 3° 5/32 3/8 1-3/4 3-1/2 42.58 49.46EMG-1608-3TB 10307 3° 1/4 1/2 2 4 57.07 65.41EMG-804-5TB 10309 5° 1/8 1/4 3/4 3 28.03 32.73EMG-1204-5TB 10311 5° 1/8 3/8 1-1/2 3-1/2 42.58 49.46EMG-1608-5TB 10313 5° 1/4 1/2 1-1/4 4 57.07 65.41EMG-804-7TB 10315 7° 1/8 1/4 1/2 3 28.03 32.73EMG-1205-7TB 10317 7° 5/32 3/8 3/4 3-1/2 42.58 49.46EMG-1606-7TB 10319 7° 3/16 1/2 1-1/4 4 57.07 65.41

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 31


CA

RB

IDE

EN

D M

ILLS - S

PE

CIA

L US

E

DIE SINKING END MILLS2 FLUTE, BALL END* Straight fl ute* Available in 6, 10, 14, and 20 degrees included angles.* Made from premium submicron grain carbide.


DEG / TIP LIST COATEDTOOL NAME EDP SIDE RADIUS SHANK LOC OAL PRICE PRICE

AMGDS-401-3B 16998 3 .0156 1/8 7/8 2 13.46 15.56AMGDS-402-3B 16999 3 .0313 1/8 9/16 2 12.68 14.78AMGDS-603-3B 17607 3 .0469 3/16 7/8 2 18.11 20.21AMGDS-804-3B 17608 3 .0625 1/4 1 2-1/2 22.77 27.47AMGDS-1005-3B 17609 3 .0781 5/16 1 2-1/2 25.88 31.48AMGDS-1206-3B 17610 3 .0938 3/8 1 2-1/2 34.16 39.76AMGDS-1407-3B 17611 3 .1094 7/16 1 2-3/4 42.44 48.77AMGDS-1608-3B 17612 3 .1250 1/2 1 3 51.75 58.08


AMGDS-401-5B 17613 5 .0156 1/8 1/2 2 13.46 15.56AMGDS-402-5B 17614 5 .0313 1/8 5/16 2 12.68 14.78AMGDS-603-5B 17615 5 .0469 3/16 1/2 2 18.11 20.21AMGDS-804-5B 17616 5 .0625 1/4 11/16 2-1/2 22.77 27.47AMGDS-1005-5B 17617 5 .0781 5/16 7/8 2-1/2 25.88 31.48AMGDS-1206-5B 17618 5 .0938 3/8 1 2-1/2 34.16 39.76AMGDS-1407-5B 17619 5 .1094 7/16 1 2-3/4 42.44 48.77AMGDS-1608-5B 17620 5 .1250 1/2 1 3 51.75 58.08


AMGDS-401-7B 17621 7 .0156 1/8 3/8 1-1/2 13.46 15.56AMGDS-402-7B 17622 7 .0313 1/8 1/4 1-1/2 12.68 14.78AMGDS-603-7B 17623 7 .0469 3/16 3/8 2 18.11 20.21AMGDS-804-7B 17624 7 .0625 1/4 1/2 2-1/2 22.77 27.47AMGDS-1005-7B 17625 7 .0781 5/16 5/8 2-1/2 25.88 31.48AMGDS-1206-7B 17626 7 .0938 3/8 3/4 2-1/2 34.16 39.76AMGDS-1407-7B 17627 7 .1094 7/16 7/8 2-3/4 42.44 48.77AMGDS-1608-7B 17628 7 .1250 1/2 1 3 51.75 58.08


AMGDS-401-10B 17629 10 .0156 1/8 1/4 1-1/2 13.46 15.56AMGDS-402-10B 17630 10 .0313 1/8 3/16 1-1/2 12.68 14.78AMGDS-603-10B 17631 10 .0469 3/16 1/4 2 18.11 20.21AMGDS-804-10B 17632 10 .0625 1/4 5/16 2-1/2 22.77 27.47AMGDS-1005-10B 17633 10 .0781 5/16 7/16 2-1/2 25.88 31.48AMGDS-1206-10B 17634 10 .0938 3/8 7/8 2-1/2 34.16 39.76AMGDS-1407-10B 17635 10 .1094 7/16 5/8 2-3/4 42.44 48.77AMGDS-1608-10B 17636 10 .1250 1/2 11/16 3 51.75 58.08

32


METRIC / INCH2 AND 4 FLUTE, SINGLE END * General purpose - square end.* Metric diameters with standard fractional shanks.* Made from premium submicron grain carbide.



AMG-4M3 15967 CCMG-4M3 15977 3mm 1/8 3/8 1-1/2 8.36 10.46AMG-6M4 15968 CCMG-6M4 15978 4mm 3/16 1/2 2 11.13 13.23AMG-8M5 15969 CCMG-8M5 15979 5mm 1/4 5/8 2-1/2 14.02 18.72AMG-8M6 15970 CCMG-8M6 15980 6mm 1/4 5/8 2-1/2 14.02 18.72AMG-10M7 15971 CCMG-10M7 15981 7mm 5/16 3/4 2-1/2 18.79 24.40AMG-12M8 15972 CCMG-12M8 15982 8mm 3/8 7/8 2-1/2 21.53 27.14AMG-12M9 15973 CCMG-12M9 15983 9mm 3/8 7/8 2-1/2 21.53 27.14AMG-14M10 15974 CCMG-14M10 15984 10mm 7/16 1 2-3/4 29.14 35.47AMG-14M11 15975 CCMG-14M11 15985 11mm 7/16 1 2-3/4 29.14 35.47AMG-16M12 15976 CCMG-16M12 15986 12mm 1/2 1 3 35.71 42.04

CA

RB

IDE

EN

D M

ILLS

- M

ET

RIC

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 33


CA

RB

IDE

EN

D M

ILLS - M

ET

RIC

METRIC END MILLS2, 3, AND 4 FLUTE, SINGLE END* General purpose - square end.* Made from premium submicron grain carbide.

Tolerance +.000/-.050mm

All dimensions listed are in millimeters (mm).

2 FLUTE 3 FLUTE 4 FLUTE LIST COATEDTOOL NAME EDP TOOL NAME EDP TOOL NAME EDP MILL SHANK LOC OAL PRICE PRICE

AMG-M3M1 16935 EMG-M3M1 16809 CCMG-M3M1 16933 1 3 3 38 8.48 10.58 AMG-M3M1.5 16936 EMG-M3M1.5 16810 CCMG-M3M1.5 16934 1.5 3 6 38 8.48 10.58 AMG-M3M2 15987 EMG-M3M2 16811 CCMG-M3M2 16000 2 3 9 38 6.99 9.09 AMG-M3M2.5 15988 EMG-M3M2.5 16812 CCMG-M3M2.5 16001 2.5 3 12 38 6.99 9.09 AMG-M3M3 15989 EMG-M3M3 16813 CCMG-M3M3 16002 3 3 12 38 6.99 9.09 AMG-M4M3.5 15990 EMG-M4M3.5 16814 CCMG-M4M3.5 16003 3.5 4 12 51 9.94 12.04 AMG-M4M4 15991 EMG-M4M4 16815 CCMG-M4M4 16004 4 4 14 51 9.94 12.04 AMG-M5M4.5 15992 EMG-M5M4.5 16816 CCMG-M5M4.5 16005 4.5 5 14 51 11.33 13.43 AMG-M5M5 15993 EMG-M5M5 16817 CCMG-M5M5 16006 5 5 20 51 11.33 13.43 AMG-M6M6 15994 EMG-M6M6 16818 CCMG-M6M6 16007 6 6 20 63 12.68 17.38 AMG-M8M7 15995 EMG-M8M7 16819 CCMG-M8M7 16008 7 8 20 63 15.16 19.86 AMG-M8M8 15996 EMG-M8M8 16820 CCMG-M8M8 16009 8 8 20 63 15.16 20.77 AMG-M10M9 15997 EMG-M10M9 16821 CCMG-M10M9 16010 9 10 22 70 24.68 30.29 AMG-M10M10 15998 EMG-M10M10 16822 CCMG-M10M10 16011 10 10 25 70 24.68 31.02 AMG-M12M12 15999 EMG-M12M12 16823 CCMG-M12M12 16012 12 12 25 76 30.74 37.07 AMG-M14M14 16926 EMG-M14M14 16824 CCMG-M14M14 16795 14 14 32 89 54.18 63.99 AMG-M16M16 16927 EMG-M16M16 16825 CCMG-M16M16 16796 16 16 32 89 58.84 68.65 AMG-M18M18 16928 EMG-M18M18 16826 CCMG-M18M18 16797 18 18 38 100 89.73 99.55 AMG-M20M20 16929 EMG-M20M20 16827 CCMG-M20M20 16798 20 20 38 100 111.68 127.70 AMG-M22M22 16930 EMG-M22M22 16828 CCMG-M22M22 16799 22 22 38 100 143.24 160.54 AMG-M25M25 16931 EMG-M25M25 16829 CCMG-M25M25 16800 25 25 38 100 147.33 164.63

34


CA

RB

IDE

EN

D M

ILLS

- M

ET

RIC

METRIC END MILLS2, 3, AND 4 FLUTE, BALL END * For applications in steel and non-ferrous materials.* Made from premium submicron grain carbide.



2 FLUTE 3 FLUTE 4 FLUTE LIST COATEDTOOL NAME EDP TOOL NAME EDP TOOL NAME EDP MILL SHANK LOC OAL PRICE PRICE

AMG-M3M1-B 16805 EMG-M3M1-B 16830 CCMG-M3M1-B 16801 1 3 3 38 9.96 12.06 AMG-M3M1.5-B 16806 EMG-M3M1.5-B 16831 CCMG-M3M1.5-B 16802 1.5 3 6 38 9.96 12.06 AMG-M3M2-B 16555 EMG-M3M2-B 16832 CCMG-M3M2-B 16572 2 3 9 38 8.21 10.31 AMG-M3M2.5-B 16556 EMG-M3M2.5-B 16833 CCMG-M3M2.5-B 16573 2.5 3 12 38 8.21 10.31 AMG-M3M3-B 16557 EMG-M3M3-B 16834 CCMG-M3M3-B 16574 3 3 12 38 8.21 10.31 AMG-M4M3.5-B 16558 EMG-M4M3.5-B 16835 CCMG-M4M3.5-B 16575 3.5 4 12 51 11.67 13.78 AMG-M4M4-B 16559 EMG-M4M4-B 16836 CCMG-M4M4-B 16576 4 4 14 51 11.67 13.78 AMG-M5M4.5-B 16560 EMG-M5M4.5-B 16837 CCMG-M5M4.5-B 16577 4.5 5 14 51 13.32 15.42 AMG-M5M5-B 16561 EMG-M5M5-B 16838 CCMG-M5M5-B 16578 5 5 20 51 13.32 15.42 AMG-M6M6-B 16562 EMG-M6M6-B 16839 CCMG-M6M6-B 16579 6 6 20 63 14.89 19.59 AMG-M8M7-B 16563 EMG-M8M7-B 16840 CCMG-M8M7-B 16580 7 8 20 63 17.81 22.51 AMG-M8M8-B 16564 EMG-M8M8-B 16841 CCMG-M8M8-B 16581 8 8 20 63 17.81 23.42 AMG-M10M9-B 16565 EMG-M10M9-B 16842 CCMG-M10M9-B 16582 9 10 22 70 29.00 34.61 AMG-M10M10-B 16566 EMG-M10M10-B 16843 CCMG-M10M10-B 16583 10 10 25 70 29.00 35.34 AMG-M12M12-B 16567 EMG-M12M12-B 16844 CCMG-M12M12-B 16584 12 12 25 76 37.16 43.49 AMG-M14M14-B 16568 EMG-M14M14-B 16845 CCMG-M14M14-B 16585 14 14 32 89 63.66 73.47 AMG-M16M16-B 16569 EMG-M16M16-B 16846 CCMG-M16M16-B 16586 16 16 32 89 69.14 78.95 AMG-M18M18-B 16570 EMG-M18M18-B 16847 CCMG-M18M18-B 16587 18 18 38 100 105.44 115.25 AMG-M20M20-B 16571 EMG-M20M20-B 16848 CCMG-M20M20-B 16588 20 20 38 100 133.45 149.47 AMG-M22M22-B 16807 EMG-M22M22-B 16849 CCMG-M22M22-B 16803 22 22 38 100 173.90 191.20 AMG-M25M25-B 16808 EMG-M25M25-B 16850 CCMG-M25M25-B 16804 25 25 38 100 178.86 196.15

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 35



CORNER RADIUS END MILLSMETRIC, 2 AND 4 FLUTE* Used when a radius is permissable.* Made from premium submicron grain carbide.


2 FLUTE 4 FLUTE LIST COATEDTOOL NAME EDP TOOL NAME EDP RADIUS MILL SHANK LOC OAL PRICE PRICE

AMG-M3M2-R0.4 16851 CCMG-M3M2-R0.4 16870 .4 2 3 9 38 8.74 10.84AMG-M3M2.5-R0.4 16852 CCMG-M3M2.5-R0.4 16871 .4 2.5 3 12 38 8.74 10.84AMG-M3M3-R0.4 16853 CCMG-M3M3-R0.4 16872 .4 3 3 12 38 8.74 10.84AMG-M4M3.5-R0.4 16854 CCMG-M4M3.5-R0.4 16873 .4 3.5 4 12 50 12.42 14.52AMG-M4M4-R0.4 16855 CCMG-M4M4-R0.4 16874 .4 4 4 14 50 12.42 14.52AMG-M5M4.5-R0.4 16856 CCMG-M5M4.5-R0.4 16875 .4 4.5 5 14 50 14.17 16.27AMG-M5M5-R0.4 16857 CCMG-M5M5-R0.4 16876 .4 5 5 20 50 14.17 16.27AMG-M6M6-R0.5 16858 CCMG-M6M6-R0.5 16877 .5 6 6 20 63 15.85 20.54AMG-M8M7-R0.5 16859 CCMG-M8M7-R0.5 16878 .5 7 8 22 63 18.95 23.65AMG-M8M8-R0.5 16860 CCMG-M8M8-R0.5 16879 .5 8 8 22 63 18.95 24.56AMG-M10M9-R0.7 16861 CCMG-M10M9-R0.7 16880 .7 9 10 22 70 30.85 36.46AMG-M10M10-R0.7 16862 CCMG-M10M10-R0.7 16881 .7 10 10 25 70 30.85 37.19AMG-M12M12-R0.7 16863 CCMG-M12M12-R0.7 16882 .7 12 12 25 76 38.43 44.76AMG-M14M14-R0.8 16864 CCMG-M14M14-R0.8 16883 .8 14 14 32 89 67.73 77.54AMG-M16M16-R0.8 16865 CCMG-M16M16-R0.8 16884 .8 16 16 38 89 73.55 83.36AMG-M18M18-R1.0 16866 CCMG-M18M18-R1.0 16885 1.0 18 18 38 100 112.17 121.99AMG-M20M20-R1.0 16867 CCMG-M20M20-R1.0 16886 1.0 20 20 38 100 139.60 155.62AMG-M22M22-R1.5 16868 CCMG-M22M22-R1.5 16887 1.5 22 22 38 100 179.06 196.35AMG-M25M25-R1.5 16869 CCMG-M25M25-R1.5 16888 1.5 25 25 38 100 184.17 201.46

MVH SERIES - VARIABLE HELIX METRIC, 4 FLUTES* Helix changes along fl utes.* Increased stability during cutting action and substantial increases in speed.* Small corner radius for added strength and smoother cutting action.* AlTiN coated for improved tool life and increased production output.* Made from premium submicron grain carbide.




VHMG-M4M4 11401 0.4 4 4 14 51 18.30VHMG-M5M5 11403 0.4 5 5 20 51 20.42VHMG-M6M6 11405 0.4 6 6 20 63 26.41VHMG-M8M8 11407 0.4 8 8 20 63 31.58VHMG-M10M10 11409 0.4 10 10 25 70 47.14VHMG-M12M12 11411 0.6 12 12 25 76 56.36VHMG-M14M14 11413 0.6 14 14 32 89 97.27VHMG-M16M16 11415 0.7 16 16 32 89 104.35VHMG-M18M18 11417 0.7 18 18 38 100 151.31VHMG-M20M20 11419 0.8 20 20 38 100 194.10VHMG-M25M25 11421 0.8 25 25 38 100 250.23

CA

RB

IDE

EN

D M

ILLS - M

ET

RIC

36


ALUMINUM CUTTING METRIC, 2 FLUTE* Excellent for slotting and profi ling at high speeds.* Made from premium submicron grain carbide.



MVB SERIES - SPHERICAL BALL ENDMETRIC, 2 AND 4 FLUTE* AlTiN coated for increased tool life.* High performance ball nose plus end mills are used in the mold industry and have a full 220 degree arc cutting capability. * Tools are stocked with a coating to optimize cutting performance.* Made from premium submicron grain carbide.



VBMG2-M4M4 11477 VBMG4-M4M4 11423 4 4 14 51 18.30VBMG2-M6M6 11479 VBMG4-M6M6 11425 6 6 20 63 26.41VBMG2-M8M8 11481 VBMG4-M8M8 11427 8 8 20 63 31.58VBMG2-M1010 11483 VBMG4-M1010 11428 10 10 25 70 47.14VBMG2-M12M12 11485 VBMG4-M12M12 11429 12 12 25 76 56.36

ALUMINUM CUTTING METRIC, 3 FLUTE* Excellent for slotting and profi ling at high speeds.* Made from premium submicron grain carbide.



ALMG-M4M4 11431 0.3 4 4 14 51 12.03 14.56ALMG-M5M5 11433 0.3 5 5 20 51 13.71 16.26ALMG-M6M6 11435 0.3 6 6 20 63 15.34 21.03ALMG-M8M8 11437 0.3 8 8 20 63 18.35 25.13ALMG-M10M10 11439 0.4 10 10 25 70 29.87 37.53ALMG-M12M12 11443 0.4 12 12 25 76 37.20 44.86ALMG-M14M14 11445 0.5 14 14 32 89 65.56 77.43ALMG-M16M16 11447 0.5 16 16 32 89 71.20 83.07ALMG-M18M18 11449 0.7 18 18 38 100 108.58 120.45ALMG-M20M20 11451 0.7 20 20 38 100 135.13 154.52ALMG-M25M25 11453 0.7 25 25 38 100 178.27 199.20


ELMG-M4M4 11455 0.125 4 4 14 51 12.03 14.56ELMG-M5M5 11457 0.125 5 5 20 51 13.71 16.26ELMG-M6M6 11459 0.125 6 6 20 63 15.34 21.03ELMG-M8M8 11461 0.125 8 8 20 63 18.35 25.13ELMG-M10M10 11463 0.125 10 10 25 70 29.87 37.53ELMG-M12M12 11465 0.125 12 12 25 76 37.20 44.86ELMG-M14M14 11467 0.125 14 14 32 89 65.56 77.43ELMG-M16M16 11469 0.125 16 16 32 89 71.20 83.07ELMG-M18M18 11471 0.125 18 18 38 100 108.58 120.45ELMG-M20M20 11473 0.125 20 20 38 100 135.13 154.52ELMG-M25M25 11475 0.125 25 25 38 100 178.27 199.20


CA

RB

IDE

EN

D M

ILLS

- M

ET

RIC

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 37

Standard coatings are the same price. To order coated tools, add TiN, TiCN, or AlTiN after the tool name or change the first digit of the EDP to 2 for TN, 4 for TiCN, or 5 for AlTiN.

CARBIDE BLANKSCENTERLESS GROUND OR ENGRAVING* Single and double end available for Engraving Blanks* Made from premium submicron grain carbide.

Tolerance +.0000/-.0005

CENTERLESS ENGRAVING TOOLSGROUND LENGTH SINGLE END DOUBLE END

SIZE EDP# LIST PRICE OF SPLIT EDP# LIST PRICE EDP# LIST PRICE1/8 x 1-1/2 10455 1.86 3/8 10521 4.02 10565 6.19

1/8 x 2 10457 2.61 3/8 10523 4.98 10567 7.15

1/8 x 3 10459 4.32 3/8 10525 7.18 10569 9.36

3/16 x 2 10461 3.52 1/2 10527 6.21 10571 8.18

3/16 x 3 10463 5.93 1/2 10529 9.52 10573 12.01

1/4 x 2 10465 4.85 1/2 10531 8.12 10575 10.61

1/4 x 2-1/2 10467 5.64 1/2 10533 9.15 10577 11.63

1/4 x 3 10469 6.99 1/2 10535 10.89 10579 13.37

1/4 X 4 10471 9.32 1/2 10537 13.90 10581 16.38

5/16 x 2-1/2 10473 8.29 1/2 10539 12.57 10583 15.05

5/16 x 3 10475 11.49 1/2 10541 16.69 10585 19.18

5/16 x 4 10477 14.98 1/2 10543 21.20 10587 23.68

3/8 X 2-1/2 10479 10.48 1/2 10545 15.91 10589 19.01

3/8 x 3 10481 13.15 1/2 10547 19.35 10591 22.46

3/8 x 3-1/2 10483 15.39 - - - - -

3/8 x 4 10485 16.52 1/2 10549 23.70 10593 26.81

3/8 x 6 10487 21.98 1/2 10551 30.75 10595 33.85

7/16 x 2-1/2 10489 14.47 5/8 10553 21.32 10597 24.74

7/16 x 2-3/4 10491 16.09 - - - - -

7/16 x 3 10493 16.28 5/8 10555 23.65 10599 27.07

7/16 X 4 10495 25.90 5/8 10557 36.07 10601 39.49

7/16 X 6 10497 44.91 - - - - -

1/2 X 3 10499 18.20 5/8 10559 26.39 10603 30.12

1/2 x 4 10501 26.67 5/8 10561 37.32 10605 41.05

1/2 X 6 10503 41.91 5/8 10563 56.98 10607 60.70

9/16 X 3-1/2 10505 33.48 - - - - -

5/8 X 3-1/2 10507 34.45 - - - - -

5/8 X 6 10509 64.16 - - - - -

3/4 X 4 10511 53.10 - - - - -

3/4 X 6 10513 101.92 - - - - -

7/8 x 4 10515 77.16 - - - - -

1 x 4 10517 92.44 - - - - -1 x 6 10519 152.12 - - - - -

CA

RB

IDE

BLA

NK

S

38


CONICAL CARBIDE BLANKSSINGLE AND DOUBLE END* 30°, 60°, and 90°* Made from premium submicron grain carbide.

SINGLE END DOUBLE ENDSIZE 30° 60° 90° LIST PRICE 30° 60° 90° LIST PRICE

1/8 x 1-1/2 91001 91013 91025 9.20 - - - -1/8 x 2 - - - - 91037 91049 91061 11.571/8 x 3 91002 91014 91026 11.11 91038 91050 91062 13.55

3/16 x 2 91003 91015 91027 11.74 91039 91051 91063 14.463/16 x 3 91004 91016 91028 12.83 91040 91052 91064 16.17

1/4 x 2-1/2 91005 91017 91029 13.95 91041 91053 91065 16.941/4 X 4 91006 91018 91030 17.28 91042 91054 91066 22.16

5/16 x 2-1/2 91007 91019 91031 21.53 91043 91055 91067 26.285/16 x 4 91008 91020 91032 27.13 91044 91056 91068 31.95

3/8 X 2-1/2 91009 91021 91033 29.47 91045 91057 91069 36.253/8 x 4 91010 91022 91034 38.30 91046 91058 91070 44.241/2 X 3 91011 91023 91035 44.75 91047 91059 91071 52.841/2 x 4 91012 91024 91036 60.66 91048 91060 91072 68.74

SIZE HALF ROUND BALL

LIST PRICE

HALF ROUND 60° CONICAL

LIST PRICE

HALF ROUND SQUARE

LIST PRICE

1/8 x 1-1/2 91073 8.99 91081 8.99 91089 6.725/32 x 1-1/2 91074 9.90 91082 9.90 91090 7.513/16 x 1-1/2 91075 12.62 91083 12.62 91091 8.99

1/4 x 2 91076 16.15 91084 16.15 91092 11.275/16 x 2 91077 23.38 91085 23.38 91093 15.833/8 x 2 91078 36.30 91086 36.30 91094 27.21

7/16 x 2 91079 47.95 91087 47.95 91095 38.371/2 x 2 91080 54.92 91088 54.92 91096 42.12

HALF ROUND CARBIDE BLANKSBALL, 60° CONICAL, AND SQUARE END* Made from premium submicron grain carbide.

CA

RB

IDE

BLA

NK

S

CONICAL CARBIDE BLANKSSINGLE AND DOUBLE END* 30°, 60°, and 90°* Made from premium submicron grain carbide.

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 39


JOBBER LENGTH DRILLSFRACTIONAL SIZES* 118° notched point suitable for most materials.* Made from premium submicron grain carbide.

Tolerance +.0000/-.0005

* Shank diameter is equal to cutting diameter unless specifi ed in parentheses.

CA

RB

IDE

DR

ILLSSIZE DECIMAL FLUTE LIST COATEDTOOL NAME EDP (SHANK*) EQUIV. LENGTH OAL PRICE PRICE

HDR-3/64 17001 3/64 .0469 3/4 1-1/2 6.05 8.12HDR-1/16 17002 1/16 .0625 3/4 1-1/2 6.13 8.20HDR-5/64 17003 5/64 .0781 7/8 1-3/4 6.50 8.57HDR-3/32 17004 3/32 .0938 1 2 7.13 9.19HDR-7/64 17005 7/64 .1094 1-1/4 2-1/4 8.10 10.63HDR-1/8 17006 1/8 .1250 1-1/4 2-1/4 8.66 11.20HDR-9/64 17007 9/64 .1406 1-3/8 2-1/2 9.58 12.12HDR-5/32 17008 5/32 .1562 1-3/8 2-1/2 10.72 13.25HDR-11/64 17009 11/64 .1719 1-5/8 2-3/4 12.69 15.22HDR-3/16 17010 3/16 .1875 1-5/8 2-3/4 13.06 15.60HDR-13/64 17011 13/64 .2031 1-3/4 3 15.03 20.10HDR-7/32 17012 7/32 .2188 1-3/4 3 16.71 21.77HDR-15/64 17013 15/64 .2344 2 3-1/4 18.92 23.99HDR-1/4 17014 1/4 .2500 2 3-1/4 19.92 24.99HDR-17/64 17015 17/64 .2656 2-1/8 3-1/2 22.46 30.06HDR-9/32 17016 9/32 .2812 2-1/8 3-1/2 23.35 30.95HDR-19/64 17017 19/64 .2969 2-3/8 3-3/4 26.29 33.89HDR-5/16 17018 5/16 .3125 2-3/8 3-3/4 27.58 35.18HDR-21/64 17019 21/64 .3281 2-1/2 4 30.09 37.70HDR-11/32 17020 11/32 .3438 2-1/2 4 32.90 40.50HDR-23/64 17021 23/64 .3594 2-3/4 4-1/4 36.81 48.00HDR-3/8 17022 3/8 .3750 2-3/4 4-1/4 39.03 50.22HDR-25/64 17023 25/64 .3906 2-7/8 4-1/2 45.69 59.84HDR-13/32 17024 13/32 .4062 2-7/8 4-1/2 50.07 64.21HDR-27/64 17025 27/64 .4219 2-7/8 4-1/2 54.44 68.59HDR-7/16 17026 7/16 .4375 2-7/8 4-1/2 54.28 68.42HDR-29/64 17027 29/64 .4531 3 4-3/4 66.04 80.19HDR-15/32 17028 15/32 .4688 3 4-3/4 68.80 82.94HDR-31/64 17029 31/64 .4844 3 4-3/4 70.77 84.91HDR-1/2 17030 1/2 .5000 3 4-3/4 70.77 84.91HDR-17/32 17447 17/32 (9/16) .5313 3-1/4 6 121.72 139.16HDR-9/16 17990 9/16 .5625 3-1/4 6 121.72 139.16HDR-19/32 17448 19/32 (5/8) .5938 3-1/2 6 139.39 156.83HDR-5/8 17991 5/8 .6250 3-1/2 6 139.39 156.83HDR-21/32 17449 21/32 (3/4) .6563 3-5/8 6 188.44 207.45HDR-11/16 17450 11/16 (3/4) .6875 3-5/8 6 188.44 207.45HDR-23/32 17451 23/32 (3/4) .7188 3-7/8 6 188.44 207.45HDR-3/4 17992 3/4 .7500 3-7/8 6 188.44 207.45

40


JOBBER LENGTH DRILLSLETTER SIZES * 118° notched point suitable for most materials.* Made from premium submicron grain carbide.

Tolerance +.0000/-.0005

LETTER SIZES * 118° notched point suitable for most materials.* Made from premium submicron grain carbide.

Tolerance +.0000/-.0005

JOBBER LENGTH DRILLSWIRE SIZES * 118° notched point suitable for most materials.* Made from premium submicron grain carbide.

Tolerance +.0000/-.0005

WIRE SIZES * 118° notched point suitable for most materials.* Made from premium submicron grain carbide.

Tolerance +.0000/-.0005

CA

RB

IDE

DR

ILLS

DECIMAL FLUTE LIST COATEDTOOL NAME EDP SIZE EQUIV. LENGTH OAL PRICE PRICE

HDR-A 17031 A .234 2 3-1/4 19.08 24.15HDR-B 17032 B .238 2 3-1/4 19.89 24.96HDR-C 17033 C .242 2 3-1/4 20.03 25.09HDR-D 17034 D .246 2 3-1/4 20.27 25.34HDR-E 17035 E .250 2 3-1/4 19.92 24.99HDR-F 17036 F .257 2 3-1/4 22.10 29.71HDR-G 17037 G .261 2-1/8 3-1/2 23.43 31.03HDR-H 17038 H .266 2-1/8 3-1/2 18.54 26.14HDR-I 17039 I .272 2-1/8 3-1/2 24.35 31.95HDR-J 17040 J .277 2-1/8 3-1/2 24.99 32.59HDR-K 17041 K .281 2-1/8 3-1/2 17.14 24.74HDR-L 17042 L .290 2-1/8 3-1/2 26.67 34.27HDR-M 17043 M .295 2-3/8 3-3/4 27.18 34.78HDR-N 17044 N .302 2-3/8 3-3/4 28.91 36.51HDR-O 17045 O .316 2-3/8 3-3/4 30.50 38.10HDR-P 17046 P .323 2-3/8 3-3/4 31.58 39.18HDR-Q 17047 Q .332 2-1/2 4 32.79 40.39HDR-R 17048 R .339 2-1/2 4 34.22 41.82HDR-S 17049 S .348 2-1/2 4 36.49 44.09HDR-T 17050 T .358 2-3/4 4-1/4 37.73 48.92HDR-U 17051 U .368 2-3/4 4-1/4 39.59 50.78HDR-V 17052 V .377 2-3/4 4-1/4 43.86 58.01HDR-W 17053 W .386 2-7/8 4-1/2 47.18 61.33HDR-X 17054 X .397 2-7/8 4-1/2 51.58 65.72HDR-Y 17055 Y .404 2-7/8 4-1/2 53.31 67.45HDR-Z 17056 Z .413 2-7/8 4-1/2 57.70 71.85


HDR-1 17057 1 .2280 1-3/4 3 17.33 22.40HDR-2 17058 2 .2210 1-3/4 3 16.71 21.77HDR-3 17059 3 .2130 1-3/4 3 15.98 21.05HDR-4 17060 4 .2090 1-3/4 3 15.60 20.67HDR-5 17061 5 .2055 1-3/4 3 15.25 20.32HDR-6 17062 6 .2040 1-3/4 3 15.25 20.32HDR-7 17063 7 .2010 1-3/4 3 14.84 19.91HDR-8 17064 8 .1990 1-3/4 3 14.68 19.75HDR-9 17065 9 .1960 1-3/4 3 14.47 19.53HDR-10 17066 10 .1935 1-5/8 2-3/4 14.28 19.35HDR-11 17067 11 .1910 1-5/8 2-3/4 14.12 19.18HDR-12 17068 12 .1890 1-5/8 2-3/4 14.12 19.18

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 41


CA

RB

IDE

DR

ILLSJOBBER LENGTH DRILLSWIRE SIZES - ContinuedJOBBER LENGTH DRILLSWIRE SIZES - Continued


HDR-13 17069 13 .1850 1-5/8 2-3/4 13.87 16.41HDR-14 17070 14 .1820 1-5/8 2-3/4 13.58 16.11HDR-15 17071 15 .1800 1-5/8 2-3/4 13.31 15.84HDR-16 17072 16 .1770 1-5/8 2-3/4 13.31 15.84HDR-17 17073 17 .1730 1-5/8 2-3/4 12.71 15.25HDR-18 17074 18 .1695 1-5/8 2-3/4 11.93 14.46HDR-19 17075 19 .1660 1-5/8 2-3/4 11.69 14.22HDR-20 17076 20 .1610 1-3/8 2-1/2 11.20 13.73HDR-21 17077 21 .1590 1-3/8 2-1/2 11.20 13.73HDR-22 17078 22 .1570 1-3/8 2-1/2 10.72 13.25HDR-23 17079 23 .1540 1-3/8 2-1/2 10.72 13.25HDR-24 17080 24 .1520 1-3/8 2-1/2 10.42 12.95HDR-25 17081 25 .1495 1-3/8 2-1/2 10.09 12.63HDR-26 17082 26 .1470 1-3/8 2-1/2 10.09 12.63HDR-27 17083 27 .1440 1-3/8 2-1/2 9.93 12.47HDR-28 17084 28 .1405 1-3/8 2-1/2 9.61 12.14HDR-29 17085 29 .1360 1-3/8 2-1/4 9.61 12.14HDR-30 17086 30 .1285 1-1/4 2-1/4 9.07 11.60HDR-31 17087 31 .1200 1-1/4 2-1/4 8.42 10.95HDR-32 17088 32 .1160 1-1/4 2-1/4 8.50 11.04HDR-33 17089 33 .1130 1-1/4 2-1/4 8.39 10.93HDR-34 17090 34 .1110 1-1/4 2-1/4 8.10 10.63HDR-35 17091 35 .1100 1-1/4 2-1/4 8.10 10.63HDR-36 17092 36 .1065 1-1/4 2-1/4 8.10 10.63HDR-37 17093 37 .1040 1-1/4 2-1/4 7.83 10.36HDR-38 17094 38 .1015 1-1/4 2-1/4 7.64 10.17HDR-39 17095 39 .0995 1-1/4 2-1/4 7.64 10.17HDR-40 17096 40 .0980 1 2 7.42 9.49HDR-41 17097 41 .0960 1 2 7.34 9.41HDR-42 17098 42 .0935 1 2 7.13 9.19HDR-43 17099 43 .0890 1 2 7.04 9.11HDR-44 17100 44 .0860 1 2 6.86 8.92HDR-45 17101 45 .0820 7/8 1-3/4 6.61 8.68HDR-46 17102 46 .0810 7/8 1-3/4 6.61 8.68HDR-47 17103 47 .0785 7/8 1-3/4 6.50 8.57HDR-48 17104 48 .0760 7/8 1-3/4 6.50 8.57HDR-49 17105 49 .0730 7/8 1-3/4 6.34 8.41HDR-50 17106 50 .0700 7/8 1-3/4 6.34 8.41HDR-51 17107 51 .0670 3/4 1-1/2 6.13 8.20HDR-52 17108 52 .0635 3/4 1-1/2 6.13 8.20HDR-53 17109 53 .0595 3/4 1-1/2 6.29 8.36HDR-54 17110 54 .0550 3/4 1-1/2 6.29 8.36HDR-55 17111 55 .0520 3/4 1-1/2 6.29 8.36HDR-56 17112 56 .0465 3/4 1-1/2 6.29 8.36

42


JOBBER LENGTH DRILLSMETRIC SIZES* 118° notched point suitable for most materials.* Made from premium submicron grain carbide.

Tolerance +.0000/-.0005

METRIC SIZES* 118° notched point suitable for most materials.* Made from premium submicron grain carbide.

Tolerance +.0000/-.0005

CA

RB

IDE

DR

ILLS


HDR-1.5MM 17393 1.5 .0591 19 38 6.55 8.62HDR-2MM 17394 2 .0787 22 44 6.96 9.03HDR-2.5MM 17395 2.5 .0984 25 51 7.87 9.94HDR-3MM 17396 3 .1181 32 58 8.85 11.38HDR-3.5MM 17397 3.5 .1378 35 64 10.45 12.98HDR-4MM 17398 4 .1575 35 64 11.80 14.33HDR-4.5MM 17399 4.5 .1772 41 70 13.92 16.46HDR-5MM 17400 5 .1969 44 76 15.15 20.22HDR-5.5MM 17401 5.5 .2165 44 76 17.21 22.27HDR-6MM 17402 6 .2362 51 83 19.42 24.49HDR-6.5MM 17403 6.5 .2559 51 83 21.70 29.30HDR-7MM 17404 7 .2756 54 90 25.39 32.99HDR-7.5MM 17405 7.5 .2953 60 95 27.86 35.46HDR-8MM 17406 8 .3150 60 95 31.54 39.14HDR-8.5MM 17407 8.5 .3346 64 102 34.57 42.17HDR-9MM 17408 9 .3543 64 102 39.98 47.58HDR-9.5MM 17409 9.5 .3740 70 108 45.02 56.21HDR-10MM 17410 10 .3937 73 114 52.59 66.74HDR-10.5MM 17411 10.5 .4134 73 114 56.53 70.67HDR-11MM 17412 11 .4331 73 114 65.21 79.36HDR-11.5MM 17413 11.5 .4528 76 121 70.87 85.02HDR-12MM 17414 12 .4724 76 121 73.32 87.47

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 43


CA

RB

IDE

DR

ILLS

STUB LENGTH DRILLSFRACTIONAL SIZES * 135° notched point suitable for titanium and stainless materials.* Made from premium submicron grain carbide.

Tolerance +.0000/-.0005


IDR-3/64 17138 3/64 .0469 1/2 1-1/2 6.53 8.60IDR-1/16 17139 1/16 .0625 5/8 1-5/8 6.69 8.76IDR-5/64 17140 5/64 .0781 11/16 1-11/16 7.04 9.11IDR-3/32 17141 3/32 .0938 3/4 1-3/4 7.10 9.17IDR-7/64 17142 7/64 .1094 13/16 1-13/16 8.47 10.54IDR-1/8 17143 1/8 .1250 7/8 1-7/8 8.47 10.54IDR-9/64 17144 9/64 .1406 15/16 1-15/16 9.80 11.87IDR-5/32 17145 5/32 .1562 1 2-1/16 10.12 12.66IDR-11/64 17146 11/64 .1719 1-1/16 2-1/8 12.79 15.33IDR-3/16 17147 3/16 .1875 1-1/8 2-3/16 12.79 15.33IDR-13/64 17148 13/64 .2031 1-3/16 2-1/4 15.33 20.40IDR-7/32 17149 7/32 .2188 1-1/4 2-3/8 15.33 20.40IDR-15/64 17150 15/64 .2344 1-5/16 2-7/16 19.59 24.66IDR-1/4 17151 1/4 .2500 1-3/8 2-1/2 18.43 23.50IDR-17/64 17152 17/64 .2656 1-7/16 2-5/8 25.56 31.68IDR-9/32 17153 9/32 .2812 1-1/2 2-11/16 26.59 32.71IDR-19/64 17154 19/64 .2969 1-9/16 2-3/4 29.64 35.76IDR-5/16 17155 5/16 .3125 1-5/8 2-13/16 26.59 32.71IDR-21/64 17156 21/64 .3281 1-11/16 2-15/16 31.20 37.32IDR-11/32 17157 11/32 .3438 1-11/16 3 34.68 40.81IDR-23/64 17158 23/64 .3594 1-3/4 3-1/16 39.81 47.41IDR-3/8 17159 3/8 .3750 1-13/16 3-1/8 43.18 50.79IDR-25/64 17160 25/64 .3906 1-7/8 3-1/4 46.45 55.74IDR-13/32 17161 13/32 .4062 1-15/16 3-5/16 51.52 60.81IDR-27/64 17162 27/64 .4219 2 3-3/8 57.49 66.78IDR-7/16 17163 7/16 .4375 2-1/16 3-7/16 54.20 63.49IDR-29/64 17164 29/64 .4531 2-1/8 3-9/16 68.91 78.20IDR-15/32 17165 15/32 .4688 2-1/8 3-5/8 72.39 81.68IDR-31/64 17166 31/64 .4844 2-3/16 3-11/16 72.39 81.68IDR-1/2 17167 1/2 .5000 2-1/4 3-3/4 67.10 76.39IDR-9/16 17993 9/16 .5625 2-1/2 4 102.83 113.80IDR-5/8 17994 5/8 .6250 2-3/4 5 128.96 139.94IDR-3/4 17995 3/4 .7500 3 5 171.32 185.25

44


STUB LENGTH DRILLSLETTER SIZES * 135° notched point suitable for titanium and stainless materials.* Made from premium submicron grain carbide.

Tolerance +.0000/-.0005

STUB LENGTH DRILLSWIRE SIZES * 135° notched point suitable for titanium and stainless materials.* Made from premium submicron grain carbide.

Tolerance +.0000/-.0005

CA

RB

IDE

DR

ILLS


IDR-A 17168 A .234 1-5/16 2-7/16 19.59 24.66IDR-B 17169 B .238 1-3/8 2-1/2 20.59 25.66IDR-C 17170 C .242 1-3/8 2-1/2 20.67 25.74IDR-D 17171 D .246 1-3/8 2-1/2 20.67 25.74IDR-E 17172 E .250 1-3/8 2-1/2 18.43 23.50IDR-F 17173 F .257 1-7/16 2-5/8 24.26 30.39IDR-G 17174 G .261 1-7/16 2-5/8 25.48 31.60IDR-H 17175 H .266 1-1/2 2-11/16 26.13 32.25IDR-I 17176 I .272 1-1/2 2-11/16 26.13 32.25IDR-J 17177 J .277 1-1/2 2-11/16 26.67 32.79IDR-K 17178 K .281 1-1/2 2-11/16 29.39 35.52IDR-L 17179 L .290 1-9/16 2-3/4 30.55 36.68IDR-M 17180 M .295 1-9/16 2-3/4 31.12 37.24IDR-N 17181 N .302 1-5/8 2-13/16 31.58 37.70IDR-O 17182 O .316 1-11/16 2-15/16 32.55 38.67IDR-P 17183 P .323 1-11/16 2-15/16 32.82 38.94IDR-Q 17184 Q .332 1-11/16 3 34.06 40.18IDR-R 17185 R .339 1-11/16 3 34.28 40.40IDR-S 17186 S .348 1-3/4 3-1/16 37.00 44.60IDR-T 17187 T .358 1-3/4 3-1/16 40.65 48.25IDR-U 17188 U .368 1-13/16 3-1/8 42.54 50.14IDR-V 17189 V .377 1-7/8 3-1/4 43.18 52.47IDR-W 17190 W .386 1-7/8 3-1/4 44.07 53.37IDR-X 17191 X .397 1-15/16 3-5/16 47.91 57.20IDR-Y 17192 Y .404 1-15/16 3-5/16 52.71 62.00IDR-Z 17193 Z .413 2 3-3/8 54.03 63.32


IDR-1 17194 1 .2280 1-5/16 2-7/16 18.87 23.93IDR-2 17195 2 .2210 1-5/16 2-7/16 18.46 23.53IDR-3 17196 3 .2130 1-1/4 2-3/8 17.95 23.02IDR-4 17197 4 .2090 1-1/4 2-3/8 17.30 22.37IDR-5 17198 5 .2055 1-1/4 2-3/8 17.03 22.10IDR-6 17199 6 .2040 1-1/4 2-3/8 17.03 22.10IDR-7 17200 7 .2010 1-3/16 2-1/4 16.22 21.29IDR-8 17201 8 .1990 1-3/16 2-1/4 15.92 20.99IDR-9 17202 9 .1960 1-3/16 2-1/4 15.57 20.64IDR-10 17203 10 .1935 1-3/16 2-1/4 15.03 20.10IDR-11 17204 11 .1910 1-3/16 2-1/4 15.03 20.10IDR-12 17205 12 .1890 1-3/16 2-1/4 14.79 19.86IDR-13 17206 13 .1850 1-1/8 2-3/16 14.60 17.14IDR-14 17207 14 .1820 1-1/8 2-3/16 14.36 16.89

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 45


CA

RB

IDE

DR

ILLS

STUB LENGTH DRILLSWIRE SIZES - Continued


IDR-15 17208 15 .1800 1-1/8 2-3-16 14.28 16.81IDR-16 17209 16 .1770 1-1/8 2-3/16 14.20 16.73IDR-17 17210 17 .1730 1-1/8 2-3/16 14.01 16.54IDR-18 17211 18 .1695 1-1/16 2-1/8 13.79 16.33IDR-19 17212 19 .1660 1-1/16 2-1/8 13.79 16.33IDR-20 17213 20 .1610 1-1/16 2-1/8 12.90 15.44IDR-21 17214 21 .1590 1-1/16 2-1/8 12.25 14.79IDR-22 17215 22 .1570 1-1/16 2-1/8 11.93 14.46IDR-23 17216 23 .1540 1 2-1/16 11.85 14.38IDR-24 17217 24 .1520 1 2-1/16 11.58 14.11IDR-25 17218 25 .1495 1 2-1/16 11.17 13.71IDR-26 17219 26 .1470 1 2-1/16 11.04 13.57IDR-27 17220 27 .1440 1 2-1/16 10.90 13.44IDR-28 17221 28 .1405 15/16 1-15/16 10.77 12.84IDR-29 17222 29 .1360 15/16 1-15/16 10.26 12.33IDR-30 17223 30 .1285 15/16 1-15/16 10.12 12.19IDR-31 17224 31 .1200 7/8 1-7/8 9.04 11.11IDR-32 17225 32 .1160 7/8 1-7/8 8.96 11.03IDR-33 17226 33 .1130 7/8 1-7/8 8.91 10.98IDR-34 17227 34 .1110 7/8 1-7/8 8.88 10.95IDR-35 17228 35 .1100 7/8 1-7/8 8.64 10.71IDR-36 17229 36 .1065 13/16 1-13/16 8.50 10.57IDR-37 17230 37 .1040 13/16 1-13/16 8.34 10.41IDR-38 17231 38 .1015 13/16 1-13/16 8.31 10.38IDR-39 17232 39 .0995 13/16 1-13/16 7.99 10.06IDR-40 17233 40 .0980 13/16 1-13/16 7.99 10.06IDR-41 17234 41 .0960 13/16 1-13/16 7.77 9.84IDR-42 17235 42 .0935 3/4 1-3/4 7.64 9.71IDR-43 17236 43 .0890 3/4 1-3/4 7.53 9.60IDR-44 17237 44 .0860 3/4 1-3/4 7.45 9.52IDR-45 17238 45 .0820 3/4 1-3/4 7.34 9.41IDR-46 17239 46 .0810 3/4 1-3/4 7.04 9.11IDR-47 17240 47 .0785 3/4 1-3/4 7.04 9.11IDR-48 17241 48 .0760 11/16 1-11/16 7.04 9.11IDR-49 17242 49 .0730 11/16 1-11/16 6.91 8.98IDR-50 17243 50 .0700 11/16 1-11/16 6.86 8.92IDR-51 17244 51 .0670 11/16 1-11/16 6.75 8.82IDR-52 17245 52 .0635 11/16 1-11/16 6.75 8.82IDR-53 17246 53 .0595 1/2 1-1/2 6.61 8.68IDR-54 17247 54 .0550 1/2 1-1/2 6.61 8.68IDR-55 17248 55 .0520 1/2 1-1/2 6.53 8.60IDR-56 17249 56 .0465 1/2 1-1/2 6.53 8.60

46


STUB DRILLSMETRIC SIZES * 135° notched point suitable for titanium and stainless materials.* Made from premium submicron grain carbide.

Tolerance +.0000/-.0005

CA

RB

IDE

DR

ILLS


IDR-1.5MM 17415 1.5 .0591 13 38 6.73 8.80IDR-2MM 17416 2 .0787 19 45 7.15 9.22IDR-2.5MM 17417 2.5 .0984 21 46 8.08 10.15IDR-3MM 17418 3 .1181 22 48 9.09 11.16IDR-3.5MM 17419 3.5 .1378 24 52 10.73 13.26IDR-4MM 17420 4 .1575 27 53 12.11 14.65IDR-4.5MM 17421 4.5 .1772 29 55 14.29 16.83IDR-5MM 17422 5 .1969 30 57 15.55 20.62IDR-5.5MM 17423 5.5 .2165 32 60 17.67 22.73IDR-6MM 17424 6 .2362 33 61 19.94 25.01IDR-6.5MM 17425 6.5 .2559 35 63 22.28 28.41IDR-7MM 17426 7 .2756 38 68 26.07 32.19IDR-7.5MM 17427 7.5 .2953 40 70 28.60 34.73IDR-8MM 17428 8 .3150 41 71 32.38 38.50IDR-8.5MM 17429 8.5 .3346 24 76 35.49 41.62IDR-9MM 17430 9 .3543 44 78 41.05 48.65IDR-9.5MM 17431 9.5 .3740 46 79 46.43 54.03IDR-10MM 17432 10 .3937 48 83 54.00 63.29IDR-10.5MM 17433 10.5 .4134 51 86 58.04 67.33IDR-11MM 17434 11 .4331 52 87 66.95 76.24IDR-11.5MM 17435 11.5 .4528 54 90 72.76 82.05IDR-12MM 17436 12 .4724 54 92 75.28 84.57

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 47


CA

RB

IDE

DR

ILLS

STRAIGHT FLUTE DRILLSFRACTIONAL SIZES * 140° point used to drill approximately 3 times the diameter depth.* For use on materials RC-40 and higher. * Made from premium submicron grain carbide.

Tolerance +.0000/-.0005


JDR-3/64 17250 3/64 .0469 1/2 1-1/2 6.53 8.60JDR-1/16 17251 1/16 .0625 5/8 1-5/8 6.75 8.82JDR-5/64 17252 5/64 .0781 11/16 1-11/16 7.10 9.17JDR-3/32 17253 3/32 .0938 3/4 1-3/4 7.18 9.25JDR-7/64 17254 7/64 .1094 13/16 1-13/16 8.47 10.54JDR-1/8-S 17437 1/8 .1250 5/8 1-1/2 8.67 10.74JDR-1/8 17255 1/8 .1250 7/8 1-7/8 8.66 10.73JDR-9/64 17256 9/64 .1406 15/16 1-15/16 10.31 12.38JDR-5/32 17257 5/32 .1562 1 2-1/16 10.82 13.36JDR-11/64 17258 11/64 .1719 1-1/16 2-1/8 14.03 16.57JDR-3/16-S 17438 3/16 .1875 5/8 2 12.82 15.35JDR-3/16 17259 3/16 .1875 1-1/8 2-3/16 12.82 15.35JDR-13/64 17260 13/64 .2031 1-3/16 2-1/4 16.38 21.45JDR-7/32 17261 7/32 .2188 1-1/4 2-3/8 16.38 21.45JDR-15/64 17262 15/64 .2344 1-5/16 2-7/16 20.46 25.53JDR-1/4-S 17439 1/4 .2500 3/4 2 18.46 23.53JDR-1/4 17263 1/4 .2500 1-3/8 2-1/2 18.46 23.53JDR-17/64 17264 17/64 .2656 1-7/16 2-5/8 26.07 32.20JDR-9/32 17265 9/32 .2812 1-1/2 2-11/16 27.10 33.22JDR-19/64 17266 19/64 .2969 1-9/16 2-3/4 29.64 35.76JDR-5/16-S 17440 5/16 .3125 3/4 2-1/2 27.10 33.22JDR-5/16 17267 5/16 .3125 1-5/8 2-13/16 27.10 33.22JDR-21/64 17268 21/64 .3281 1-11/16 2-15/16 33.47 39.59JDR-11/32 17269 11/32 .3438 1-11/16 3 36.98 43.10JDR-23/64 17270 23/64 .3594 1-3/4 3-1/16 40.89 48.49JDR-3/8-S 17441 3/8 .3750 1 2-1/2 43.19 50.79JDR-3/8 17271 3/8 .3750 1-13/16 3-1/8 43.18 50.79JDR-25/64 17272 25/64 .3906 1-7/8 3-1/4 46.45 55.74JDR-13/32 17273 13/32 .4062 1-15/16 3-5/16 51.50 60.79JDR-27/64 17274 27/64 .4219 2 3-3/8 56.44 65.73JDR-7/16-S 17442 7/16 .4375 1 2-3/4 61.44 70.73JDR-7/16 17275 7/16 .4375 2-1/16 3-7/16 61.44 70.73JDR-29/64 17276 29/64 .4531 2-1/8 3-9/16 68.85 78.14JDR-15/32 17277 15/32 .4688 2-1/8 3-5/8 71.77 81.06JDR-31/64 17278 31/64 .4844 2-3/16 3-11/16 72.58 81.87JDR-1/2-S 17443 1/2 .5000 1 3 66.48 75.77JDR-1/2 17279 1/2 .5000 2-1/4 3-3/4 66.48 75.77JDR-9/16 17444 9/16 .5625 1-1/8 3-1/2 73.27 84.24JDR-5/8 17445 5/8 .6250 1-1/4 3-1/2 83.19 94.17JDR-3/4 17446 3/4 .7500 1-1/2 4 153.50 167.43

48


STRAIGHT FLUTE DRILLSLETTER SIZES * 140° point used to drill approximately 3 times the diameter depth.* For use on materials RC-40 and higher. * Made from premium submicron grain carbide.

Tolerance +.0000/-.0005

STRAIGHT FLUTE DRILLSWIRE SIZES * 140° point used to drill approximately 3 times the diameter depth.* For use on materials RC-40 and higher. * Made from premium submicron grain carbide.

Tolerance +.0000/-.0005

CA

RB

IDE

DR

ILLS


JDR-A 17280 A .234 1-5/16 2-7/16 20.76 25.82JDR-B 17281 B .238 1-3/8 2-1/2 21.40 26.47JDR-C 17282 C .242 1-3/8 2-1/2 22.10 27.17JDR-D 17283 D .246 1-3/8 2-1/2 22.91 27.98JDR-E 17284 E .250 1-3/8 2-1/2 18.46 23.53JDR-F 17285 F .257 1-7/16 2-5/8 25.48 31.60JDR-G 17286 G .261 1-7/16 2-5/8 26.77 32.90JDR-H 17287 H .266 1-1/2 2-11/16 26.94 33.06JDR-I 17288 I .272 1-1/2 2-11/16 27.93 34.06JDR-J 17289 J .277 1-1/2 2-11/16 28.56 34.68JDR-K 17290 K .281 1-1/2 2-11/16 28.66 34.79JDR-L 17291 L .290 1-9/16 2-3/4 31.09 37.22JDR-M 17292 M .295 1-9/16 2-3/4 31.09 37.21JDR-N 17293 N .302 1-5/8 2-13/16 32.23 38.35JDR-O 17294 O .316 1-11/16 2-15/16 32.63 38.75JDR-P 17295 P .323 1-11/16 2-15/16 33.36 39.48JDR-Q 17296 Q .332 1-11/16 3 34.52 40.64JDR-R 17297 R .339 1-11/16 3 35.57 41.70JDR-S 17298 S .348 1-3/4 3-1/16 37.73 45.33JDR-T 17299 T .358 1-3/4 3-1/16 41.62 49.22JDR-U 17300 U .368 1-13/16 3-1/8 42.54 50.14JDR-V 17301 V .377 1-7/8 3-1/4 44.64 53.93JDR-W 17302 W .386 1-7/8 3-1/4 45.53 54.82JDR-X 17303 X .397 1-15/16 3-5/16 48.88 58.17JDR-Y 17304 Y .404 1-15/16 3-5/16 48.88 58.17JDR-Z 17305 Z .413 2 3-3/8 55.11 64.40


JDR-1 17306 1 .2280 1-5/16 2-7/16 18.87 23.93JDR-2 17307 2 .2210 1-5/16 2-7/16 18.46 23.53JDR-3 17308 3 .2130 1-1/4 2-3/8 17.95 23.02JDR-4 17309 4 .2090 1-1/4 2-3/8 17.30 22.37JDR-5 17310 5 .2055 1-1/4 2-3/8 17.03 22.10JDR-6 17311 6 .2040 1-1/4 2-3/8 17.03 22.10JDR-7 17312 7 .2010 1-3/16 2-1/4 16.22 21.29JDR-8 17313 8 .1990 1-3/16 2-1/4 15.92 20.99JDR-9 17314 9 .1960 1-3/16 2-1/4 15.57 20.64JDR-10 17315 10 .1935 1-3/16 2-1/4 15.20 20.26JDR-11 17316 11 .1910 1-3/16 2-1/4 15.03 20.10JDR-12 17317 12 .1890 1-3/16 2-1/4 14.79 19.86JDR-13 17318 13 .1850 1-1/8 2-3/16 14.60 17.14JDR-14 17319 14 .1820 1-1/8 2-3/16 14.36 16.89

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 49


CA

RB

IDE

DR

ILLS

STRAIGHT FLUTE DRILLSWIRE SIZES - Continued


JDR-15 17320 15 .1800 1-1/8 2-3/16 14.28 16.81JDR-16 17321 16 .1770 1-1/8 2-3/16 14.20 16.73JDR-17 17322 17 .1730 1-1/8 2-3/16 14.01 16.54JDR-18 17323 18 .1695 1-1/16 2-1/8 13.79 16.33JDR-19 17324 19 .1660 1-1/16 2-1/8 13.79 16.33JDR-20 17325 20 .1610 1-1/16 2-1/8 12.90 15.44JDR-21 17326 21 .1590 1-1/16 2-1/8 12.25 14.79JDR-22 17327 22 .1570 1-1/16 2-1/8 11.93 14.46JDR-23 17328 23 .1540 1 2-1/16 11.85 14.38JDR-24 17329 24 .1520 1 2-1/16 11.58 14.11JDR-25 17330 25 .1495 1 2-1/16 11.17 13.71JDR-26 17331 26 .1470 1 2-1/16 11.04 13.57JDR-27 17332 27 .1440 1 2-1/16 10.90 13.44JDR-28 17333 28 .1405 15/16 1-15/16 10.77 12.84JDR-29 17334 29 .1360 15/16 1-15/16 10.26 12.33JDR-30 17335 30 .1285 15/16 1-15/16 10.12 12.19JDR-31 17336 31 .1200 7/8 1-7/8 9.04 11.11JDR-32 17337 32 .1160 7/8 1-7/8 8.96 11.03JDR-33 17338 33 .1130 7/8 1-7/8 8.91 10.98JDR-34 17339 34 .1110 7/8 1-7/8 8.88 10.95JDR-35 17340 35 .1100 7/8 1-7/8 8.64 10.71JDR-36 17341 36 .1065 13/16 1-13/16 8.50 10.57JDR-37 17342 37 .1040 13/16 1-13/16 8.34 10.41JDR-38 17343 38 .1015 13/16 1-13/16 8.31 10.38JDR-39 17344 39 .0995 13/16 1-13/16 7.99 10.06JDR-40 17345 40 .0980 13/16 1-13/16 7.99 10.06JDR-41 17346 41 .0960 13/16 1-13/16 7.77 9.84JDR-42 17347 42 .0935 3/4 1-3/4 7.64 9.71JDR-43 17348 43 .0890 3/4 1-3/4 7.53 9.60JDR-44 17349 44 .0860 3/4 1-3/4 7.45 9.52JDR-45 17350 45 .0820 3/4 1-3/4 7.34 9.41JDR-46 17351 46 .0810 3/4 1-3/4 7.04 9.11JDR-47 17352 47 .0785 3/4 1-3/4 7.04 9.11JDR-48 17353 48 .0760 11/16 1-11/16 7.04 9.11JDR-49 17354 49 .0730 11/16 1-11/16 6.91 8.98JDR-50 17355 50 .0700 11/16 1-11/16 6.86 8.92JDR-51 17356 51 .0670 11/16 1-11/16 6.75 8.82JDR-52 17357 52 .0635 11/16 1-11/16 6.75 8.82JDR-53 17358 53 .0595 1/2 1-1/2 6.61 8.68JDR-54 17359 54 .0550 1/2 1-1/2 6.61 8.68JDR-55 17360 55 .0520 1/2 1-1/2 6.53 8.60JDR-56 17361 56 .0465 1/2 1-1/2 6.53 8.60

50


STRAIGHT FLUTE DRILLSMETRIC SIZES * 140° point used to drill approximately 3 times the diameter depth.* For use on materials RC-40 and higher. * Made from premium submicron grain carbide.

Tolerance +.0000/-.0005

CA

RB

IDE

DR

ILLS

COMBINED DRILL AND COUNTERSINK - CARBIDE4 FLUTE, SINGLE END* For centering and spot drilling applications when high accuracy is necessary.* 60° included angle* Use carbide for highly abrasive or tough materials in production runs.

BODY DRILL DRILL LISTTOOL NAME EDP SIZE DIA. DIA. LENGTH OAL PRICE

KDR-00 17362 OO 3/32 .025 .030 1-1/2 13.50KDR-0 17363 0 3/32 1/32 .038 1-1/2 12.65KDR-1 17364 1 1/8 3/64 3/64 1-1/2 10.37KDR-2 17365 2 3/16 5/64 5/64 2 16.43KDR-3 17366 3 1/4 7/64 7/64 2 19.61KDR-4 17367 4 5/16 1/8 1/8 2-1/8 26.88KDR-5 17368 5 7/16 3/16 3/16 2-3/4 40.72KDR-6 17369 6 1/2 7/32 7/32 3 55.57KDR-7 10611 7 5/8 1/4 1/4 3-1/4 108.21KDR-8 10613 8 3/4 5/16 5/16 3-1/2 143.35

See our Countersinks section for more combined drill and countersink tools!


JDR-1.5MM 17371 1.5 .0591 13 38 6.73 8.80JDR-2MM 17372 2 .0787 19 45 7.15 9.22JDR-2.5MM 17373 2.5 .0984 21 46 8.08 10.15JDR-3MM 17374 3 .1181 22 48 9.09 11.62JDR-3.5MM 17375 3.5 .1378 24 52 10.73 13.26JDR-4MM 17376 4 .1575 27 53 12.11 14.65JDR-4.5MM 17377 4.5 .1772 29 55 14.29 16.83JDR-5MM 17378 5 .1969 30 57 15.55 20.62JDR-5.5MM 17379 5.5 .2165 32 60 17.67 22.73JDR-6MM 17380 6 .2362 33 61 19.94 25.01JDR-6.5MM 17381 6.5 .2559 35 63 22.28 29.88JDR-7MM 17382 7 .2756 38 68 26.07 33.67JDR-7.5MM 17383 7.5 .2953 40 70 28.60 36.20JDR-8MM 17384 8 .3150 41 71 32.38 39.98JDR-8.5MM 17385 8.5 .3346 24 76 35.49 43.09JDR-9MM 17386 9 .3543 44 78 41.05 48.65JDR-9.5MM 17387 9.5 .3740 46 79 46.43 57.62JDR-10MM 17388 10 .3937 48 83 54.00 68.14JDR-10.5MM 17389 10.5 .4134 51 86 58.04 72.18JDR-11MM 17390 11 .4331 52 87 66.95 81.10JDR-11.5MM 17391 11.5 .4528 54 90 72.76 86.91JDR-12MM 17392 12 .4724 54 92 75.28 89.42

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 51


CA

RB

IDE

DR

ILLS

NC SPOTTING DRILLS* Various degree points* Made from premium submicron grain carbide.

Tolerance +.0000/-.0005

ANGLE DRILL SHANK FLUTE LIST COATEDTOOL NAME EDP DEGREE DIA. DIA. LENGTH OAL PRICE PRICE

HDRNC-1/8-60 19257 60 1/8 1/8 5/8 2 8.95 11.05HDRNC-1/8-90 17711 90 1/8 1/8 5/8 2 8.95 11.05HDRNC-1/8-120 17716 120 1/8 1/8 5/8 2 8.95 11.05HDRNC-3/16-90 17712 90 3/16 3/16 3/4 2 13.09 15.19HDRNC-3/16-120 17717 120 3/16 3/16 3/4 2 13.09 15.19HDRNC-1/4-60 19259 60 1/4 1/4 3/4 2-1/2 15.75 19.10HDRNC-1/4-90 17713 90 1/4 1/4 3/4 2-1/2 15.75 19.10HDRNC-1/4-120 17718 120 1/4 1/4 3/4 2-1/2 15.75 19.10HDRNC-3/8-60 19261 60 3/8 3/8 1 3 22.41 27.25HDRNC-3/8-90 17714 90 3/8 3/8 1 3 22.41 27.25HDRNC-3/8-120 17719 120 3/8 3/8 1 3 22.41 27.25HDRNC-7/16-60 19264 60 7/16 7/16 1-1/4 3 35.18 40.77HDRNC-7/16-90 19262 90 7/16 7/16 1-1/4 3 35.18 40.77HDRNC-1/2-60 19266 60 1/2 1/2 1 3 33.85 40.19HDRNC-1/2-90 17715 90 1/2 1/2 1 3 33.85 40.19HDRNC-1/2-120 17720 120 1/2 1/2 1 3 33.85 40.19HDRNC-5/8-60 19269 60 5/8 5/8 1-1/4 3 63.53 73.34HDRNC-5/8-90 19267 90 5/8 5/8 1-1/4 3 63.53 73.34HDRNC-3/4-60 19272 60 3/4 3/4 1-3/4 3-1/2 85.16 101.18HDRNC-3/4-90 19270 90 3/4 3/4 1-3/4 3-1/2 85.16 101.18HDRNC-7/8-90 19273 90 7/8 7/8 1-3/4 3-1/2 162.69 179.99HDRNC-7/8-120 19274 120 7/8 7/8 1-3/4 3-1/2 162.69 179.99HDRNC-1-60 19277 60 1 1 1-3/4 3-1/2 187.06 204.35HDRNC-1-90 19275 90 1 1 1-3/4 3-1/2 187.06 204.35HDRNC-1-120 19276 120 1 1 1-3/4 3-1/2 187.06 204.35

52


HIGH PERFORMANCE DRILL3 FLUTE, ALL SIZES* 150 degree points* Made from premium submicron grain carbide.

Tolerance +.0000/-.0005

3 FLUTE, ALL SIZES* 150 degree points* Made from premium submicron grain carbide.

Tolerance +.0000/-.0005

CA

RB

IDE

DR

ILLS

DECIMAL FLUTE LIST COATEDTOOL NAME EDP SIZE EQUIV. SHANK LENGTH OAL PRICE PRICE

LDR-7/64 10341 7/64 .1094 1/8 3/4 2-1/4 9.74 12.33LDR-33 10343 33 .1130 1/8 3/4 2-1/4 10.10 12.68LDR-3MM 10345 3mm .1181 1/8 20 58 10.65 13.09LDR-1/8 10347 1/8 .1250 1/8 3/4 2-1/4 10.42 13.01LDR-29 10349 29 .1360 4mm 3/4 2-1/4 11.56 14.14LDR-3.5MM 10351 3.5mm .1378 4mm 22 64 12.57 15.16LDR-9/64 10353 9/64 .1406 4mm 7/8 2-1/2 11.53 14.11LDR-5/32 10355 5/32 .1562 4mm 7/8 2-1/2 12.89 15.48LDR-4MM 10357 4mm .1575 4mm 24 64 14.19 16.75LDR-21 10359 21 .1590 3/16 1 2-1/2 13.48 16.06LDR-11/64 10361 11/64 .1719 3/16 1 2-3/4 15.26 17.85LDR-4.5MM 10363 4.5mm .1772 3/16 28 70 16.75 19.35LDR-3/16 10365 3/16 .1875 3/16 1-1/8 2-3/4 15.72 18.30LDR-5MM 10367 5mm .1969 6mm 30 76 18.23 23.45LDR-7 10369 7 .2010 6mm 1-1/4 3 17.86 23.03LDR-13/64 10371 13/64 .2031 6mm 1-1/4 3 18.09 23.25LDR-5.5MM 10373 5.5mm .2165 6mm 34 76 20.70 25.39LDR-7/32 10375 7/32 .2188 6mm 1-1/4 3 20.10 25.27LDR-15/64 10377 15/64 .2344 6mm 1-3/8 3-1/4 22.76 27.93LDR-6MM 10379 6mm .2362 6mm 38 83 23.37 28.57LDR-1/4 10381 1/4 .2500 1/4 1-1/2 3-1/4 23.96 29.13LDR-6.5MM 10383 6.5mm .2559 8mm 38 83 26.11 31.43LDR-F 10385 F .257 8mm 1-1/2 3-1/4 26.60 34.35LDR-17/64 10387 17/64 .2656 8mm 1-1/2 3-1/2 27.02 34.77LDR-I 10389 I .272 8mm 1-1/2 3-1/2 29.29 37.04LDR-7MM 10391 7mm .2756 8mm 42 90 30.55 38.31LDR-9/32 10393 9/32 .2812 8mm 1-3/4 3-1/2 28.09 35.84LDR-7.5MM 10395 7.5mm .2953 8mm 45 95 33.52 41.28LDR-19/64 10397 19/64 .2969 8mm 1-3/4 3-3/4 31.63 39.38LDR-5/16 10399 5/16 .3125 8mm 1-7/8 3-3/4 33.19 40.94LDR-8MM 10401 8mm .3150 8mm 48 95 37.95 44.54LDR-21/64 10403 21/64 .3281 3/8 2 4 36.21 43.96LDR-Q 10405 Q .332 3/8 2 4 39.45 47.20LDR-8.5MM 10407 8.5mm .3346 3/8 52 102 41.59 49.40LDR-11/32 10409 11/32 .3438 3/8 2 4 39.58 47.33LDR-9MM 10411 9mm .3543 3/8 54 102 48.10 55.78LDR-23/64 10413 23/64 .3594 3/8 2-1/4 4-1/4 44.29 55.70LDR-U 10415 U .368 3/8 2-1/4 4-1/4 47.64 59.05LDR-9.5MM 10417 9.5mm .3740 3/8 58 108 54.16 65.31LDR-3/8 10419 3/8 .3750 3/8 2-1/4 4-1/4 46.96 58.37LDR-25/64 10421 25/64 .3906 10mm 2-3/8 4-1/2 54.98 69.40LDR-10MM 10423 10mm .3937 10mm 60 114 63.28 76.39LDR-13/32 10425 13/32 .4062 7/16 2-3/8 4-1/2 60.24 74.66LDR-10.5MM 10427 10.5mm .4134 7/16 64 114 68.01 83.57LDR-27/64 10429 27/64 .4219 7/16 2-1/2 4-1/2 65.50 79.92LDR-11MM 10431 11mm .4331 7/16 68 114 78.46 92.70LDR-7/16 10433 7/16 .4375 7/16 2-1/2 4-1/2 65.30 79.73LDR-11.5MM 10435 11.5mm .4528 1/2 70 121 85.27 99.12LDR-29/64 10437 29/64 .4531 1/2 2-3/4 4-3/4 79.46 93.88LDR-15/32 10439 15/32 .4688 1/2 2-3/4 4-3/4 82.77 97.20LDR-12MM 10441 12mm .4724 1/2 72 121 88.22 102.80LDR-31/64 10443 31/64 .4844 1/2 2-3/4 4-3/4 85.14 99.57LDR-1/2 10445 1/2 .5000 1/2 2-3/4 4-3/4 85.14 99.57LDR-9/16 10447 9/16 .5625 9/16 3-1/4 6 138.83 156.61LDR-5/8 10449 5/8 .6250 5/8 3-1/2 6 160.09 177.87LDR-3/4 10451 3/4 .7500 3/4 3-7/8 6 215.29 234.67

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 53

60 DEGREE UN THREAD MILLSSTRAIGHT FLUTE * Helps to save on tooling costs versus using larger taps.* All tools AlTiN coated for longer tool life.* Made from premium submicron grain carbide.

STRAIGHT FLUTE * Helps to save on tooling costs versus using larger taps.* All tools AlTiN coated for longer tool life.* Made from premium submicron grain carbide.

MIN THREAD CUTTER LISTTOOL NAME EDP DIA. / PITCH DIA. SHANK LOC OAL PRICE

TM-6-32-S 17500 6-32 .085 1/8 7/32 2 126.19TM-8-32-S 17501 8-32 .120 1/8 1/4 2 126.19TM-10-24-S 17502 10-24 .140 3/16 5/16 2-1/2 138.20TM-10-28-S 17503 10-28 .140 3/16 5/16 2-1/2 138.20TM-10-32-S 17504 10-32 .140 3/16 5/16 2-1/2 138.20TM-1/4-20-S 17505 1/4-20 .180 3/16 1/2 2-1/2 138.20TM-1/4-28-S 17506 1/4-28 .180 3/16 1/2 2-1/2 138.20TM-1/4-32-S 17507 1/4-32 .180 3/16 1/2 2-1/2 138.20TM-5/16-18-S 17508 5/16-18 .235 1/4 5/8 2-1/2 150.22TM-5/16-24-S 17509 5/16-24 .235 1/4 5/8 2-1/2 150.22TM-5/16-32-S 17510 5/16-32 .235 1/4 5/8 2-1/2 150.22TM-3/8-16-S 17511 3/8-16 .300 5/16 3/4 3 186.29TM-3/8-24-S 17512 3/8-24 .300 5/16 3/4 3 186.29TM-7/16-14-S 17513 7/16-14 .345 3/8 3/4 3-1/2 198.30TM-7/16-20-S 17514 7/16-20 .345 3/8 3/4 3-1/2 198.30TM-1/2-13-S 17515 1/2-13 .370 3/8 7/8 3-1/2 198.30TM-1/2-20-S 17516 1/2-20 .370 3/8 7/8 3-1/2 198.30TM-1/2-28-S 17517 1/2-28 .370 3/8 7/8 3-1/2 198.30TM-9/16-12-S 17518 9/16-12 .450 1/2 7/8 3-1/2 216.32TM-9/16-18-S 17519 9/16-18 .450 1/2 7/8 3-1/2 216.32TM-5/8-10-S 17520 5/8-10 .490 1/2 1 3-1/2 216.32TM-5/8-11-S 17521 5/8-11 .490 1/2 1 3-1/2 216.32TM-5/8-12-S 17522 5/8-12 .490 1/2 1 3-1/2 216.32TM-5/8-18-S 17523 5/8-18 .490 1/2 1 3-1/2 216.32TM-3/4-12-S 17524 3/4-12 .600 5/8 1 3-1/2 234.35TM-3/4-16-S 17525 3/4-16 .600 5/8 1 3-1/2 234.35TM-3/4-20-S 17526 3/4-20 .600 5/8 1 3-1/2 234.35TM-7/8-9-S 17527 7/8-9 .620 5/8 1 3-1/2 234.35TM-7/8-12-S 17528 7/8-12 .620 5/8 1 3-1/2 234.35TM-7/8-14-S 17529 7/8-14 .620 5/8 1 3-1/2 234.35TM-7/8-16-S 17530 7/8-16 .620 5/8 1 3-1/2 234.35TM-7/8-20-S 17531 7/8-20 .620 5/8 1 3-1/2 234.35TM-1-8-S 17532 1-8 .735 3/4 1 5 288.44TM-1-12-S 17533 1-12 .735 3/4 1 5 288.44TM-1-16-S 17534 1-16 .735 3/4 1 5 288.44TM-1-20-S 17535 1-20 .735 3/4 1 5 288.44

Programming disk for CNC equipment available by download at www.endmill.com or by request.

CA

RB

IDE

TH

RE

AD

MILLS

54

60 DEGREE UN THREAD MILLSHELICAL FLUTE * Helps to save on tooling costs versus using larger taps.* All tools AlTiN coated for longer tool life.* Made from premium submicron grain carbide.


TM-6-32-H 17536 6-32 .085 1/8 7/32 2 138.81TM-8-32-H 17537 8-32 .120 1/8 1/4 2 138.81TM-10-24-H 17538 10-24 .140 3/16 5/16 2-1/2 152.04TM-10-28-H 17539 10-28 .140 3/16 5/16 2-1/2 152.04TM-10-32-H 17540 10-32 .140 3/16 5/16 2-1/2 152.04TM-1/4-20-H 17541 1/4-20 .180 3/16 1/2 2-1/2 152.04TM-1/4-28-H 17542 1/4-28 .180 3/16 1/2 2-1/2 152.04TM-1/4-32-H 17543 1/4-32 .180 3/16 1/2 2-1/2 152.04TM-5/16-18-H 17544 5/16-18 .235 1/4 5/8 2-1/2 165.25TM-5/16-24-H 17545 5/16-24 .235 1/4 5/8 2-1/2 165.25TM-5/16-32-H 17546 5/16-32 .235 1/4 5/8 2-1/2 165.25TM-3/8-16-H 17547 3/8-16 .300 5/16 3/4 3 204.92TM-3/8-24-H 17548 3/8-24 .300 5/16 3/4 3 204.92TM-7/16-14-H 17549 7/16-14 .345 3/8 3/4 3-1/2 218.12TM-7/16-20-H 17550 7/16-20 .345 3/8 3/4 3-1/2 218.12TM-1/2-13-H 17551 1/2-13 .370 3/8 7/8 3-1/2 218.12TM-1/2-20-H 17552 1/2-20 .370 3/8 7/8 3-1/2 218.12TM-1/2-28-H 17553 1/2-28 .370 3/8 7/8 3-1/2 218.12TM-9/16-12-H 17554 9/16-12 .450 1/2 7/8 3-1/2 237.97TM-9/16-18-H 17555 9/16-18 .450 1/2 7/8 3-1/2 237.97TM-5/8-10-H 17556 5/8-10 .490 1/2 1 3-1/2 237.97TM-5/8-11-H 17557 5/8-11 .490 1/2 1 3-1/2 237.97TM-5/8-12-H 17558 5/8-12 .490 1/2 1 3-1/2 237.97TM-5/8-18-H 17559 5/8-18 .490 1/2 1 3-1/2 237.97TM-3/4-12-H 17560 3/4-12 .600 5/8 1 3-1/2 257.79TM-3/4-16-H 17561 3/4-16 .600 5/8 1 3-1/2 257.79TM-3/4-20-H 17562 3/4-20 .600 5/8 1 3-1/2 257.79TM-7/8-9-H 17563 7/8-9 .620 5/8 1 3-1/2 257.79TM-7/8-12-H 17564 7/8-12 .620 5/8 1 3-1/2 257.79TM-7/8-14-H 17565 7/8-14 .620 5/8 1 3-1/2 257.79TM-7/8-16-H 17566 7/8-16 .620 5/8 1 3-1/2 257.79TM-7/8-20-H 17567 7/8-20 .620 5/8 1 3-1/2 257.79TM-1-8-H 17568 1-8 .735 3/4 1 5 317.29TM-1-12-H 17569 1-12 .735 3/4 1 5 317.29TM-1-16-H 17570 1-16 .735 3/4 1 5 317.29TM-1-20-H 17571 1-20 .735 3/4 1 5 317.29


CA

RB

IDE

TH

RE

AD

MIL

LS

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 55

CA

RB

IDE

TH

RE

AD

MILLS

NPT AND NPTF PIPE THREAD MILLSSTRAIGHT FLUTE * Helps to save on tooling costs versus using larger taps.* All tools AlTiN coated for longer tool life.* Made from premium submicron grain carbide.

NPT AND NPTF PIPE THREAD MILLSHELICAL FLUTE * Helps to save on tooling costs versus using larger taps.* All tools AlTiN coated for longer tool life.* Made from premium submicron grain carbide.


TM-1/16-27NPT-S 17572 1/16-27NPT .218 1/4 1/2 2-1/2 165.25TM-1/8-27NPT-S 17573 1/8-27NPT .300 5/16 19/32 3 186.29TM-1/4-18NPT-S 17574 1/4-18NPT .360 3/8 5/8 3-1/2 198.30TM-3/8-18NPT-S 17575 3/8-18NPT .382 7/16 3/4 3-1/2 198.30TM-1/2-14NPT-S 17576 1/2-14NPT .490 1/2 1 3-1/2 228.34TM-1-11.5NPT-S 17577 1-11.5NPT .990 1 1-1/8 4 354.52TM-2.5-8NPT-S 17578 2.5-8NPT .990 1 1-1/2 5 402.61


TM-1/16-27NPT-H 17579 1/16-27NPT .218 1/4 1/2 2-1/2 165.25TM-1/8-27NPT-H 17580 1/8-27NPT .300 5/16 19/32 3 204.92TM-1/4-18NPT-H 17581 1/4-18NPT .360 3/8 5/8 3-1/2 218.12TM-3/8-18NPT-H 17582 3/8-18NPT .382 7/16 3/4 3-1/2 218.12TM-1/2-14NPT-H 17583 1/2-14NPT .490 1/2 1 3-1/2 251.18TM-1-11.5NPT-H 17584 1-11.5NPT .990 1 1-1/8 4 389.99


TM-1/8-27NPTF-S 11607 1/8-27NPTF .300 5/16 19/32 3 186.29TM-1/4-18NPTF-S 11609 1/4-18NPTF .360 3/8 5/8 3-1/2 198.30TM-1/2-14NPTF-S 11611 1/2-14NPTF .490 1/2 1 3-1/2 228.34TM-1-11.5NPTF-S 11613 1-11.5NPTF .990 1 1-1/8 4 354.52


TM-1/8-27NPTF-H 11615 1/8-27NPTF .300 5/16 19/32 3 204.92TM-1/4-18NPTF-H 11616 1/4-18NPTF .360 3/8 5/8 3-1/2 218.12TM-1/2-14NPTF-H 11617 1/2-14NPTF .490 1/2 1 3-1/2 251.18TM-1-11.5NPTF-H 11619 1-11.5NPTF .990 1 1-1/8 4 389.99

BSP and BSPT thread styles are available by special order. Programming disck for CNC equipment avail-able by download at www.endmill.com or by request.

56

60 DEGREE UN THREAD MILLSHELICAL FLUTE - METRIC SIZES * Helps to save on tooling costs versus using larger taps.* All tools AlTiN coated for longer tool life.* Made from premium submicron grain carbide.



TM-M3-.5-H 17585 3mm-.5mm .085 1/8 15/64 2 138.81TM-M3.5-6-H 17586 3.5mm-.6mm .095 1/8 15/64 2 138.81TM-M4-.7-H 17587 4mm-.7mm .115 1/8 1/4 2 138.81TM-M4.5-.75-H 17588 4.5mm-.75mm .120 1/8 1/4 2 138.81TM-M5-.8-H 17589 5mm-.8mm .145 3/16 5/64 2-1/2 152.04TM-M6-1-H 17590 6mm-1mm .170 3/16 1/2 2-1/2 152.04TM-M8-1-H 17591 8mm-1mm .235 1/4 5/8 2-1/2 165.25TM-M8-1.25-H 17592 8mm-1.25mm .235 1/4 5/8 2-1/2 165.25TM-M10-1.25-H 17593 10mm-1.25mm .300 5/16 3/4 3 218.12TM-M10-1.5-H 17594 10mm-1.5mm .300 5/16 3/4 3 218.12TM-M12-1.25-H 17595 12mm-1.25mm .370 3/8 7/8 3-1/2 218.12TM-M12-1.75-H 17596 12mm-1.75mm .370 3/8 7/8 3-1/2 218.12TM-M14-1.25-H 17597 14mm-1.25mm .450 1/2 1 3-1/2 237.97TM-M14-1.5-H 17598 14mm-1.5mm .450 1/2 1 3-1/2 237.97TM-M14-2-H 17599 14mm-2mm .450 1/2 1 3-1/2 237.97TM-M18-2.5-H 17600 18mm-2.5mm .490 1/2 1 3-1/2 237.97TM-M20-1.5-H 17601 20mm-1.5mm .620 5/8 1 3-1/2 257.79TM-M20-2-H 17602 20mm-2mm .620 5/8 1 3-1/2 257.79TM-M24-1.5-H 17603 24mm-1.5mm .750 3/4 1 5 317.29TM-M24-2-H 17604 24mm-2mm .750 3/4 1 5 317.29TM-M24-2.5-H 17605 24mm-2.5mm .750 3/4 1 5 317.29TM-M24-3-H 17606 24mm-3mm .750 3/4 1 5 317.29

CA

RB

IDE

TH

RE

AD

MIL

LS

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 57


2 FLUTE, SINGLE ENDCENTER CUTTINGMINIATURE* General purpose milling in most materials of medium hardness such as steel, brass, iron, etc.

Tolerance +.001/-.000 If shank and mill diameters are the same, tolerance is +.0000/-.0025

2 FLUTE, SINGLE ENDCENTER CUTTING * General purpose milling in most materials of medium and tough alloy materials, such as stainless steel, nickel base alloy, brass, iron etc. * Standard, stub, medium, long, and extra long lengths.


LIST COATEDTOOL NAME EDP MAT. MILL SHANK LOC OAL FLUTES PRICE PRICE

A-601 10002 M42 1/32 3/16 3/32 1-1/2 2 8.38 11.14A-601-1/2 10004 M42 3/64 3/16 9/64 1-1/2 2 8.38 11.14A-602 10006 M42 1/16 3/16 3/16 1-1/2 2 8.38 11.14A-602-1/2 10008 M42 5/64 3/16 15/64 1-1/2 2 8.38 11.14A-603 10010 M42 3/32 3/16 9/32 1-1/2 2 8.38 11.14A-603-1/2 10012 M42 7/64 3/16 21/64 1-1/2 2 8.38 11.14A-604 10014 M42 1/8 3/16 3/8 1-1/2 2 8.38 11.14A-604-1/2 10016 M42 9/64 3/16 27/64 1-1/2 2 8.38 11.14A-605 10018 M42 5/32 3/16 7/16 1-1/2 2 8.38 11.14A-605-1/2 10020 M42 11/64 3/16 1/2 1-1/2 2 8.38 11.14A-606 10022 M42 3/16 3/16 1/2 1-1/2 2 8.38 11.14A-808 10024 M42 1/4 1/4 3/4 2-3/4 2 11.57 14.44


A-1203 10026 M42 3/32 3/8 5/16 2-1/4 2 11.25 14.98AS-1204 10030 M42 1/8 3/8 3/16 2-1/8 2 10.92 14.66A-1204 10028 M42 1/8 3/8 3/8 2-5/16 2 10.92 14.76A-1204-M 12802 M42 1/8 3/8 1/2 2-3/8 2 13.36 17.25A-1204-L 12804 M42 1/8 3/8 3/4 2-5/8 2 14.60 18.50AS-1205 10034 M42 5/32 3/8 3/16 2-1/16 2 11.25 14.98A-1205 10032 M42 5/32 3/8 7/16 2-5/16 2 11.52 15.41A-1205-M 12806 M42 5/32 3/8 5/8 2-1/2 2 13.36 17.25A-1205-L 12808 M42 5/32 3/8 3/4 2-5/8 2 14.60 18.50AS-1206 10038 M42 3/16 3/8 3/16 2-1/16 2 10.11 13.90A-1206 10036 M42 3/16 3/8 7/16 2-5/16 2 10.11 14.01A-1206-M 12810 M42 3/16 3/8 5/8 2-1/2 2 12.17 16.01A-1206-L 10474 M42 3/16 3/8 3/4 2-5/8 2 15.14 19.04A-1206-E 12812 M42 3/16 3/8 1-1/4 3-1/8 2 23.36 27.20AS-1207 10042 M42 7/32 3/8 1/4 2-1/8 2 11.52 15.30A-1207 10040 M42 7/32 3/8 1/2 2-3/8 2 11.52 15.41A-1207-M 12814 M42 7/32 3/8 7/8 2-3/4 2 14.06 17.90A-1207-L 10476 M42 7/32 3/8 1-1/4 3-1/8 2 15.90 19.74A-1207-E 12816 M42 7/32 3/8 1-1/2 3-3/8 2 23.36 27.20AS-1208 10046 M42 1/4 3/8 1/4 2-1/16 2 10.28 14.06A-1208 10044 M42 1/4 3/8 1/2 2-5/16 2 10.28 14.17A-1208-M 12818 M42 1/4 3/8 7/8 2-3/4 2 12.76 16.60A-1208-L 10478 M42 1/4 3/8 1-1/4 3-1/16 2 15.90 19.74A-1208-E 12820 M42 1/4 3/8 1-3/4 3-9/16 2 23.36 28.93AS-1209 10050 M42 9/32 3/8 5/16 2-1/8 2 11.74 15.60A-1209 10048 M42 9/32 3/8 9/16 2-3/8 2 11.52 15.41A-1209-M 12822 M42 9/32 3/8 1 2-3/4 2 14.06 17.90A-1209-L 10480 M42 9/32 3/8 1-3/8 3-1/8 2 15.90 19.74

CO

BA

LT H

SS

EN

D M

ILLS - G

EN

ER

AL P

UR

PO

SE

58


2 FLUTE, SINGLE ENDCENTER CUTTING - Continued


A-1209-E 12824 M42 9/32 3/8 1-3/4 3-5/8 2 23.36 27.20AS-1210 10054 M42 5/16 3/8 5/16 2-1/16 2 10.28 14.06A-1210 10052 M42 5/16 3/8 9/16 2-5/16 2 10.28 14.17A-1210-M 12826 M42 5/16 3/8 1 2-3/4 2 12.76 16.60A-1210-L 10482 M42 5/16 3/8 1-3/8 3-1/8 2 15.90 19.74A-1210-E 12828 M42 5/16 3/8 2 3-3/4 2 23.36 28.93AS-1211 10058 M42 11/32 3/8 3/8 2-3/16 2 11.74 15.60A-1211 10056 M42 11/32 3/8 3/4 2-1/2 2 11.52 15.41A-1211-M 12830 M42 11/32 3/8 1 2-3/4 2 14.06 17.90A-1211-L 10484 M42 11/32 3/8 1-1/2 3-1/4 2 15.90 19.74A-1211-E 12832 M42 11/32 3/8 2 3-3/4 2 23.36 28.93AS-1212 10062 M42 3/8 3/8 3/8 2-1/8 2 10.28 14.06A-1212 10060 M42 3/8 3/8 9/16 2-5/16 2 10.28 14.17A-1212-M 10486 M42 3/8 3/8 1 2-3/4 2 12.76 16.60A-1212-L 10488 M42 3/8 3/8 1-1/2 3-1/4 2 14.76 18.66A-1212-E 10490 M42 3/8 3/8 2-1/2 4-1/4 2 21.42 27.31A-1213 10064 M42 13/32 3/8 13/16 2-1/2 2 15.57 21.69AS-1214 12794 M42 7/16 3/8 7/16 2-1/8 2 15.88 21.94A-1214 10066 M42 7/16 3/8 13/16 2-1/2 2 15.57 21.69A-1614 10070 M42 7/16 1/2 13/16 2-13/16 2 16.93 22.98A-1214-M 12834 M42 7/16 3/8 1-1/4 3-1/4 2 19.41 25.53A-1614-L 10492 M42 7/16 1/2 1-3/4 3-3/4 2 22.61 29.69A-1214-E 12836 M42 7/16 3/8 2-3/4 4-3/4 2 25.22 32.86A-1615 10072 M42 15/32 1/2 1 3 2 16.93 22.98AS-1216 12796 M42 1/2 3/8 1/2 2-3/16 2 16.60 22.66A-1216 10068 M42 1/2 3/8 13/16 2-1/2 2 16.60 22.66A-1616 10074 M42 1/2 1/2 1 3 2 14.60 20.71A-1616-M 10494 M42 1/2 1/2 1-1/2 3-1/2 2 20.66 27.63A-1616-L 10496 M42 1/2 1/2 2 4 2 21.31 28.39A-1616-E 10498 M42 1/2 1/2 3 5 2 26.66 33.96A-1617 10076 M42 17/32 1/2 1-1/8 3-1/8 2 20.93 27.26A-1618 10078 M42 9/16 1/2 1-1/8 3-1/8 2 18.77 25.09A-1619 10080 M42 19/32 1/2 1-1/8 3-1/8 2 23.42 30.07AS-1620 12798 M42 5/8 1/2 5/8 2-3/4 2 21.09 27.74A-1620 10082 M42 5/8 1/2 1-1/8 3-1/8 2 21.09 27.74A-2020 10108 M42 5/8 5/8 1-5/16 3-7/16 2 21.47 29.04A-2020-M 10500 M42 5/8 5/8 2 4-1/8 2 28.93 36.56A-2020-L 10502 M42 5/8 5/8 2-1/2 4-5/8 2 32.12 39.75A-2020-E 12838 M42 5/8 5/8 4 6-1/8 2 41.56 57.63A-1621 10084 M42 21/32 1/2 1-5/16 3-5/16 2 25.53 34.99A-1622 10086 M42 11/16 1/2 1-5/16 3-5/16 2 23.96 33.85A-2022 10110 M42 11/16 5/8 1-5/16 3-7/16 2 23.96 36.61A-1623 10088 M42 23/32 1/2 1-5/16 3-5/16 2 27.36 37.64AS-1624 16470 M42 3/4 1/2 5/8 2-5/8 2 24.34 34.61A-1624 10090 M42 3/4 1/2 1-5/16 3-5/16 2 24.34 34.61A-2024 10112 M42 3/4 5/8 1-5/16 3-7/16 2 24.34 39.04AS-2424 12800 M42 3/4 3/4 3/4 3 2 25.39 36.17A-2424 10122 M42 3/4 3/4 1-5/16 3-9/16 2 24.34 39.04A-2424-M 10504 M42 3/4 3/4 2-1/4 4-1/2 2 34.99 50.69A-2424-L 10506 M42 3/4 3/4 3 5-1/4 2 42.43 59.18A-2424-E 12840 M42 3/4 3/4 4 6-1/4 2 53.02 81.50A-1625 10092 M42 25/32 1/2 1-1/2 3-1/2 2 33.75 48.45A-1626 10094 M42 13/16 1/2 1-1/2 3-1/2 2 33.75 48.45A-2026 10114 M42 13/16 5/8 1-1/2 3-5/8 2 31.23 46.51A-2426 10124 M42 13/16 3/4 1-1/2 3-3/4 2 32.28 48.11A-1627 10096 M42 27/32 1/2 1-1/2 3-1/2 2 34.12 48.94

CO

BA

LT H

SS

EN

D M

ILLS

- G

EN

ER

AL

PU

RP

OS

E

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 59


CO

BA

LT H

SS

EN

D M

ILLS - G

EN

ER

AL P

UR

PO

SE



AS-1628 16471 M42 7/8 1/2 5/8 2-5/8 2 34.93 49.65A-1628 10098 M42 7/8 1/2 1-1/2 3-1/2 2 34.93 49.64A-2028 10116 M42 7/8 5/8 1-1/2 3-5/8 2 30.77 45.48A-2428 10126 M42 7/8 3/4 1-1/2 3-3/4 2 32.74 48.42A-2828 10152 M42 7/8 7/8 1-1/2 3-3/4 2 33.87 50.26A-2828-M 10508 M42 7/8 7/8 2-1/2 4-3/4 2 42.07 58.08A-2828-L 10510 M42 7/8 7/8 3-1/2 5-3/4 2 49.11 78.30A-1629 10100 M42 29/32 1/2 1-1/2 3-1/2 2 39.21 53.92A-1630 10102 M42 15/16 1/2 1-1/2 3-1/2 2 39.21 53.92A-2030 10118 M42 15/16 5/8 1-1/2 3-5/8 2 38.11 54.18A-2430 10128 M42 15/16 3/4 1-1/2 3-3/4 2 36.88 52.35A-2830 10154 M42 15/16 7/8 1-1/2 3-3/4 2 37.59 53.36A-1631 10104 M42 31/32 1/2 1-1/2 3-1/2 2 39.96 56.08AS-1632 16472 M42 1 1/2 3/4 2-3/4 2 39.96 56.07A-1632 10106 M42 1 1/2 1-1/2 3-1/2 2 39.96 56.08AS-2032 16474 M42 1 5/8 3/4 2-7/8 2 36.88 53.86A-2032 10120 M42 1 5/8 1-1/2 3-5/8 2 36.88 53.86AS-2432 16476 M42 1 3/4 3/4 3 2 36.88 53.86A-2432 10130 M42 1 3/4 1-1/2 3-3/4 2 36.88 53.86A-2832 10156 M42 1 7/8 1-1/2 3-3/4 2 40.30 59.02A-3232 10162 M42 1 1 1-5/8 4-1/8 2 40.34 56.64A-3232-M 10512 M42 1 1 3 5-1/2 2 51.65 68.52A-3232-L 10514 M42 1 1 4 6-1/2 2 63.27 92.47A-2434 10132 M42 1-1/16 3/4 1-1/2 3-3/4 2 64.41 81.06A-3234 10164 M42 1-1/16 1 1-5/8 4-1/8 2 64.41 81.06AS-2436 16477 M42 1-1/8 3/4 3/4 3 2 58.73 75.39A-2436 10134 M42 1-1/8 3/4 1-5/8 3-7/8 2 58.73 75.39A-2836 10158 M42 1-1/8 7/8 1-5/8 3-7/8 2 59.86 76.84A-3236 10166 M42 1-1/8 1 1-5/8 4-1/8 2 58.73 75.39A-3236-M 10516 M42 1-1/8 1 3 5-1/2 2 71.61 88.58A-2438 10136 M42 1-3/16 3/4 1-5/8 3-7/8 2 73.97 91.27A-3238 10168 M42 1-3/16 1 1-5/8 4-1/8 2 73.97 91.27AS-1640 16473 M42 1-1/4 1/2 3/4 2-3/4 2 67.40 84.75AS-2040 16475 M42 1-1/4 5/8 3/4 2-7/8 2 67.40 84.75AS-2440 16478 M42 1-1/4 3/4 3/4 3 2 67.40 84.75A-2440 10138 M42 1-1/4 3/4 1-5/8 3-7/8 2 67.40 84.75A-2840 10160 M42 1-1/4 7/8 1-5/8 3-7/8 2 61.30 78.76A-3240 10170 M42 1-1/4 1 1-5/8 4-1/8 2 65.22 81.88A-4040 10180 M42 1-1/4 1-1/4 1-5/8 4-1/8 2 65.22 81.88A-3240-M 10518 M42 1-1/4 1 3 5-1/2 2 85.12 103.59A-4040-M 10522 M42 1-1/4 1-1/4 3 5-1/2 2 77.06 93.77A-4040-L 10524 M42 1-1/4 1-1/4 4 6-1/2 2 105.84 135.33A-3242 10172 M7 1-5/16 1 1-5/8 4-1/8 2 75.60 130.20AS-2444 16479 M7 1-3/8 3/4 3/4 3 2 66.19 118.81A-2444 10140 M7 1-3/8 3/4 1-5/8 3-7/8 2 66.19 118.81A-3244 10174 M7 1-3/8 1 1-5/8 4-1/8 2 66.19 118.81AP-3244 15028 M42 1-3/8 1 1-5/8 4-1/8 2 81.09 140.08A-3244-M 10520 M7 1-3/8 1 3 5-1/2 2 84.31 141.58A-3246 10176 M7 1-7/16 1 1-5/8 4-1/8 2 83.19 137.84A-2448 10142 M7 1-1/2 3/4 1-5/8 3-7/8 2 75.66 130.31A-3248 10178 M7 1-1/2 1 1-5/8 4-1/8 2 72.84 125.46A-4048 10184 M7 1-1/2 1-1/4 1-5/8 4-1/8 2 75.66 130.31AS-2448 16480 M7 1-1/2 3/4 3/4 3 2 75.66 130.31AP-2448 15278 M42 1-1/2 3/4 1-5/8 3-7/8 2 92.20 142.12AP-4048 10792 M42 1-1/2 1-1/4 1-5/8 4-1/8 2 101.65 155.28A-4048-M 10526 M7 1-1/2 1-1/4 3 5-1/2 2 93.15 150.50

60




A-4048-L 10528 M7 1-1/2 1-1/4 4 6-1/2 2 118.13 195.69A-4050 10186 M7 1-9/16 1-1/4 1-5/8 4-1/8 2 91.67 146.32A-2452 10144 M7 1-5/8 3/4 1-5/8 3-7/8 2 80.36 132.98A-4052 10188 M7 1-5/8 1-1/4 1-5/8 4-1/8 2 81.91 135.55A-2456 10146 M7 1-3/4 3/4 1-5/8 3-7/8 2 89.39 142.01A-4056 10190 M7 1-3/4 1-1/4 1-5/8 4-1/8 2 89.39 142.01AP-4056 10794 M42 1-3/4 1-1/4 1-5/8 4-1/8 2 119.92 174.57A-4056-M 10532 M7 1-3/4 1-1/4 3 5-1/2 2 121.66 178.95A-2460 10148 M7 1-7/8 3/4 1-5/8 3-7/8 2 101.69 157.41A-4060 10192 M7 1-7/8 1-1/4 1-5/8 4-1/8 2 100.26 154.97A-4060-M 10536 M7 1-7/8 1-1/4 3 5-1/2 2 135.65 192.94A-2464 10150 M7 2 3/4 1-5/8 3-7/8 2 105.67 158.34A-4064 10194 M7 2 1-1/4 1-5/8 4-1/8 2 111.23 167.05AP-2464 15286 M42 2 3/4 1-5/8 3-7/8 2 122.54 171.43A-4064-M 10538 M7 2 1-1/4 3 5-1/2 2 138.85 193.45A-4068 10198 M7 2-1/8 1-1/4 1-5/8 4-1/8 2 124.80 222.59A-4072 10200 M7 2-1/4 1-1/4 1-5/8 4-1/8 2 142.31 240.79A-4072-M 10542 M7 2-1/4 1-1/4 3 5-1/2 2 181.31 280.96A-4080 10202 M7 2-1/2 1-1/4 1-5/8 4-1/8 2 177.66 277.25A-4080-M 10544 M7 2-1/2 1-1/4 3 5-1/2 2 220.80 320.39

2 FLUTE, SINGLE END, CENTER CUTTINGKEYWAY TOLERANCES* General purpose milling in most materials of medium and tough alloy materials, such as stainless steel, nickel base alloy, brass, iron etc.* Used to mill keyways to close tolerance.

Tolerance +.0000/-.0015


AK-1204 10208 M42 1/8 3/8 3/8 2-5/16 2 11.14 15.05AK-1206 10212 M42 3/16 3/8 7/16 2-5/16 2 10.11 14.01AK-1208 10216 M42 1/4 3/8 1/2 2-5/16 2 10.28 14.17AK-1210 10220 M42 5/16 3/8 9/16 2-5/16 2 10.28 14.17AK-1212 10224 M42 3/8 3/8 9/16 2-5/16 2 10.28 14.17AK-1214 10228 M42 7/16 3/8 13/16 2-1/2 2 15.57 21.69AK-1216 10230 M42 1/2 3/8 13/16 2-1/2 2 16.60 22.66AK-1616 10236 M42 1/2 1/2 1 3 2 14.60 20.71AK-1618 10240 M42 9/16 1/2 1-1/8 3-1/8 2 19.13 25.58AK-1620 10244 M42 5/8 1/2 1-1/8 3-1/8 2 21.50 28.28AK-2020 10270 M42 5/8 5/8 1-5/16 3-7/16 2 21.47 29.04AK-2024 10274 M42 3/4 5/8 1-5/16 3-7/16 2 24.81 39.80AK-2424 10284 M42 3/4 3/4 1-5/16 3-9/16 2 25.64 41.19AK-2026 10276 M42 13/16 5/8 1-1/2 3-5/8 2 30.65 45.64AK-2028 10278 M42 7/8 5/8 1-1/2 3-5/8 2 31.37 46.36AK-2828 10306 M42 7/8 7/8 1-1/2 3-3/4 2 32.98 48.89AK-2032 10282 M42 1 5/8 1-1/2 3-5/8 2 36.11 52.59AK-3232 10316 M42 1 1 1-5/8 4-1/8 2 40.74 57.16AK-3240 10324 M42 1-1/4 1 1-5/8 4-1/8 2 65.27 81.93AK-3248 10332 M7 1-1/2 1 1-5/8 4-1/8 2 74.25 127.89AK-4048 10336 M7 1-1/2 1-1/4 1-5/8 4-1/8 2 74.25 127.89AK-4056 10340 M7 1-3/4 1-1/4 1-5/8 4-1/8 2 91.12 144.76AK-4064 10344 M7 2 1-1/4 1-5/8 4-1/8 2 107.71 161.40

CO

BA

LT H

SS

EN

D M

ILLS

- G

EN

ER

AL

PU

RP

OS

E

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 61


CO

BA

LT H

SS

EN

D M

ILLS - G

EN

ER

AL P

UR

PO

SE

2 FLUTE, SINGLE ENDBALL END * Used for radius or contouring part surfaces. * Materials ranging from nickel base alloy, stainless, tough alloys, and abrasive materials.* Standard, medium, and long lengths.

Tolerance +.0005/-.0005. If mill diameter is greater than 5/8”, tolerance is +.001/-.001


A-1204-B 10352 M42 1/8 3/8 3/8 2-5/16 2 14.60 18.50A-1205-B 10354 M42 5/32 3/8 7/16 2-5/16 2 15.95 19.79A-1206-B 10356 M42 3/16 3/8 1/2 2-3/8 2 13.74 17.58A-1206-LB 10546 M42 3/16 3/8 3/4 2-5/8 2 20.55 24.39A-1207-B 10358 M42 7/32 3/8 9/16 2-3/8 2 16.44 20.33A-1207-LB 10548 M42 7/32 3/8 1-1/4 3-1/8 2 21.72 25.69A-1208-B 10360 M42 1/4 3/8 5/8 2-7/16 2 14.11 17.95A-1208-LB 10550 M42 1/4 3/8 1-1/4 3-1/16 2 20.55 24.39A-1209-B 10362 M42 9/32 3/8 9/16 2-3/8 2 18.17 22.06A-1209-LB 10552 M42 9/32 3/8 1-3/8 3-1/8 2 22.71 26.62A-1210-B 10364 M42 5/16 3/8 3/4 2-1/2 2 16.66 20.55A-1210-LB 10554 M42 5/16 3/8 1-3/8 3-1/8 2 20.55 24.39A-1211-B 10366 M42 11/32 3/8 3/4 2-1/2 2 18.17 22.06A-1211-LB 10556 M42 11/32 3/8 1-1/2 3-1/4 2 22.71 26.62A-1212-B 10368 M42 3/8 3/8 3/4 2-1/2 2 16.93 20.77A-1212-MB 10558 M42 3/8 3/8 1 2-3/4 2 18.98 22.82A-1212-LB 10560 M42 3/8 3/8 1-1/2 3-1/4 2 19.74 23.63A-1213-B 10370 M42 13/32 3/8 13/16 2-1/2 2 23.20 29.26A-1214-B 10372 M42 7/16 3/8 13/16 2-1/2 2 23.20 29.26A-1614-B 10376 M42 7/16 1/2 1 3 2 23.20 29.26A-1614-LB 10562 M42 7/16 1/2 1-3/4 3-3/4 2 32.07 39.04A-1615-B 10378 M42 15/32 1/2 1 3 2 23.63 29.74A-1216-B 10374 M42 1/2 3/8 13/16 2-1/2 2 25.74 31.80A-1616-B 10380 M42 1/2 1/2 1 3 2 23.42 29.47A-1616-MB 10564 M42 1/2 1/2 1-1/2 3-1/2 2 29.69 36.67A-1616-LB 10566 M42 1/2 1/2 2 4 2 31.47 38.50A-1617-B 10382 M42 17/32 1/2 1-1/8 3-1/8 2 30.82 37.15A-1618-B 10384 M42 9/16 1/2 1-1/8 3-1/8 2 28.39 34.72A-1619-B 10386 M42 19/32 1/2 1-1/8 3-1/8 2 35.42 42.07A-1620-B 10388 M42 5/8 1/2 1-1/8 3-1/8 2 30.99 37.69A-2020-B 10414 M42 5/8 5/8 1-3/8 3-1/2 2 30.99 38.61A-2020-MB 10568 M42 5/8 5/8 2 4-1/8 2 42.06 49.83A-2020-LB 10570 M42 5/8 5/8 2-1/2 4-5/8 2 45.26 52.89A-1621-B 10390 M42 21/32 1/2 1-5/16 3-5/16 2 40.56 50.08A-1622-B 10392 M42 11/16 1/2 1-5/16 3-5/16 2 40.56 50.08A-2022-B 10416 M42 11/16 5/8 1-5/16 3-7/16 2 40.56 52.73A-1623-B 10394 M42 23/32 1/2 1-5/16 3-5/16 2 41.48 51.70A-1624-B 10396 M42 3/4 1/2 1-5/16 3-5/16 2 36.56 46.78A-2024-B 10418 M42 3/4 5/8 1-5/16 3-7/16 2 37.26 52.26A-2424-B 10428 M42 3/4 3/4 1-5/8 3-7/8 2 38.34 53.75A-2424-MB 10572 M42 3/4 3/4 2-1/4 4-1/2 2 45.75 60.51A-2424-LB 10574 M42 3/4 3/4 3 5-1/4 2 53.21 67.98A-1625-B 10398 M42 25/32 1/2 1-1/2 3-1/2 2 51.65 66.64A-1626-B 10400 M42 13/16 1/2 1-1/2 3-1/2 2 49.01 64.00A-2026-B 10420 M42 13/16 5/8 1-1/2 3-5/8 2 47.63 62.62A-1627-B 10402 M42 27/32 1/2 1-1/2 3-1/2 2 52.81 67.86A-1628-B 10404 M42 7/8 1/2 1-1/2 3-1/2 2 50.16 65.16A-2028-B 10422 M42 7/8 5/8 1-1/2 3-5/8 2 48.78 63.78A-2428-B 10430 M42 7/8 3/4 2 4-1/4 2 47.86 62.57

62


2 FLUTE, SINGLE ENDBALL END - Continued


A-2828-B 10434 M42 7/8 7/8 2 4-1/4 2 47.86 62.57A-1629-B 10406 M42 29/32 1/2 1-1/2 3-1/2 2 70.17 85.17A-1630-B 10408 M42 15/16 1/2 1-1/2 3-1/2 2 63.45 78.44A-2030-B 10424 M42 15/16 5/8 1-1/2 3-5/8 2 61.68 76.68A-2830-B 10436 M42 15/16 7/8 1-1/2 3-3/4 2 61.68 76.68A-1631-B 10410 M42 31/32 1/2 1-1/2 3-1/2 2 71.50 88.24A-1632-B 10412 M42 1 1/2 1-1/2 3-1/2 2 62.24 78.36A-2032-B 10426 M42 1 5/8 1-1/2 3-5/8 2 62.85 79.59A-2432-B 10432 M42 1 3/4 2-1/4 4-1/2 2 60.51 76.63A-3232-B 10444 M42 1 1 2-1/4 4-3/4 2 60.51 76.63A-3232-MB 10580 M42 1 1 3 5-1/2 2 71.55 87.66A-3232-LB 10582 M42 1 1 4 6-1/2 2 85.22 115.10A-3234-B 10446 M42 1-1/16 1 1-5/8 4-1/8 2 80.09 96.69A-3236-B 10448 M42 1-1/8 1 2-1/4 4-3/4 2 71.22 87.88A-3238-B 10450 M42 1-3/16 1 1-5/8 4-1/8 2 95.20 112.23A-2840-B 10442 M42 1-1/4 7/8 1-5/8 3-7/8 2 88.36 105.40A-3240-B 10452 M42 1-1/4 1 1-5/8 4-1/8 2 85.39 102.42A-4040-B 10462 M42 1-1/4 1-1/4 2-1/2 5 2 89.52 107.38A-3242-B 10454 M7 1-5/16 1 1-5/8 4-1/8 2 97.07 150.71A-3244-B 10456 M7 1-3/8 1 1-5/8 4-1/8 2 88.91 142.55A-3246-B 10458 M7 1-7/16 1 1-5/8 4-1/8 2 111.50 166.15A-3248-B 10460 M7 1-1/2 1 1-5/8 4-1/8 2 100.44 154.07A-4048-B 10464 M7 1-1/2 1-1/4 2-1/2 5 2 103.29 158.45A-4052-B 10466 M7 1-5/8 1-1/4 1-5/8 4-1/8 2 112.51 166.14A-4056-B 10468 M7 1-3/4 1-1/4 1-5/8 4-1/8 2 122.87 175.49A-4060-B 10470 M7 1-7/8 1-1/4 1-5/8 4-1/8 2 141.88 196.59A-4064-B 10472 M7 2 1-1/4 1-5/8 4-1/8 2 156.17 209.80A-4064-LB 10608 M7 2 1-1/4 4 6-1/2 2 258.83 337.74

CO

BA

LT H

SS

EN

D M

ILLS

- G

EN

ER

AL

PU

RP

OS

E

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 63


CO

BA

LT H

SS

EN

D M

ILLS - G

EN

ER

AL P

UR

PO

SE

2 FLUTE, SINGLE END, 40° HELIXCENTER CUTTING FOR ALUMINUM * Used to machine soft materials such as aluminum, plastic, or zinc alloys.* High helix provides positive shearing action and rapid chip removal.* Standard, medium, long, and extra long lengths.

Tolerance +.0015/-.0000


AA-1206 10614 M42 3/16 3/8 7/16 2-5/16 2 13.03 16.93AA-1206-L 10646 M42 3/16 3/8 3/4 2-5/8 2 15.41 19.25AA-1206-E 10698 M42 3/16 3/8 1-1/4 3-1/8 2 25.20 29.04AA-1208 10616 M42 1/4 3/8 1/2 2-5/16 2 13.36 17.25AA-1208-M 10648 M42 1/4 3/8 5/8 2-7/16 2 15.41 19.25AA-1208-MM 10650 M42 1/4 3/8 3/4 2-5/8 2 15.41 19.25AA-1208-ML 10652 M42 1/4 3/8 1 2-7/8 2 15.52 19.36AA-1208-L 10654 M42 1/4 3/8 1-1/4 3-1/16 2 16.33 20.39AA-1208-LL 10656 M42 1/4 3/8 1-1/2 3-3/8 2 17.14 21.20AA-1208-E 10700 M42 1/4 3/8 1-3/4 3-9/16 2 24.61 30.23AA-1210 10618 M42 5/16 3/8 9/16 2-5/16 2 13.36 17.25AA-1210-M 10658 M42 5/16 3/8 3/4 2-1/2 2 15.41 19.25AA-1210-MM 10660 M42 5/16 3/8 1 2-3/4 2 15.41 19.25AA-1210-L 10662 M42 5/16 3/8 1-3/8 3-1/8 2 15.57 19.41AA-1210-E 10702 M42 5/16 3/8 2 3-3/4 2 24.50 30.12AA-1212 10620 M42 3/8 3/8 9/16 2-5/16 2 13.36 17.25AA-1212-M 10664 M42 3/8 3/8 3/4 2-1/2 2 15.41 19.25AA-1212-MM 10666 M42 3/8 3/8 1 2-3/4 2 15.41 19.25AA-1212-L 10668 M42 3/8 3/8 1-1/2 3-1/4 2 16.33 20.39AA-1212-LL 10670 M42 3/8 3/8 2 3-3/4 2 17.81 23.87AA-1212-E 10704 M42 3/8 3/8 2-1/2 4-1/4 2 22.66 28.50AA-1214 10622 M42 7/16 3/8 1 2-11/16 2 16.98 23.04AA-1614-L 10672 M42 7/16 1/2 1-3/4 3-3/4 2 23.36 30.34AA-1616 10624 M42 1/2 1/2 1 3 2 19.36 25.47AA-1616-M 10674 M42 1/2 1/2 1-1/4 3-1/4 2 21.85 27.85AA-1616-MM 10676 M42 1/2 1/2 1-3/4 3-3/4 2 22.61 29.69AA-1616-L 10678 M42 1/2 1/2 2 4 2 24.50 31.53AA-1616-LL 10680 M42 1/2 1/2 2-1/2 4-1/2 2 26.74 34.29AA-1616-E 10708 M42 1/2 1/2 3 5 2 30.07 37.10AAS-2020 10628 M42 5/8 5/8 1-3/8 3-1/2 2 25.11 32.97AA-2020 10626 M42 5/8 5/8 1-5/8 3-3/4 2 24.82 32.39AA-2020-L 10682 M42 5/8 5/8 2-1/2 4-5/8 2 35.67 43.92AA-2020-E 10710 M42 5/8 5/8 4 6-1/8 2 43.72 59.96AA-2424 10630 M42 3/4 3/4 1-5/8 3-7/8 2 30.72 46.73AA-2424-M 10684 M42 3/4 3/4 2 4-1/4 2 38.94 54.40AA-2424-L 10686 M42 3/4 3/4 3 5-1/4 2 46.51 62.25AA-2424-E 10712 M42 3/4 3/4 4 6-1/4 2 56.34 84.70AA-2828 10634 M42 7/8 7/8 1-7/8 4-1/8 2 39.40 54.62AA-2432 10632 M42 1 3/4 1-7/8 4-1/8 2 47.37 63.54AA-3232 10636 M42 1 1 2 4-1/2 2 48.05 64.49AA-3232-L 10690 M42 1 1 4 6-1/2 2 69.38 98.69AA-3232-E 10716 M42 1 1 6 8-1/2 2 93.73 124.62AA-4040 10638 M42 1-1/4 1-1/4 2 4-1/2 2 84.70 102.00AA-4040-L 10692 M42 1-1/4 1-1/4 4 6-1/2 2 115.65 145.70AA-4040-E 10718 M42 1-1/4 1-1/4 6 8-1/2 2 152.67 184.18AA-4048 10640 M7 1-1/2 1-1/4 2 4-1/2 2 100.26 154.97AA-4048-L 10694 M7 1-1/2 1-1/4 4 6-1/2 2 142.72 225.52

64


2 FLUTE, SINGLE END, 40° HELIXBALL END FOR ALUMINUM * Used for radius or contouring part surfaces.* Designed to machine soft materials such as aluminum, plastic, or zinc alloys.* High helix provides positive shearing action and rapid chip removal.* Standard, medium, long, and extra long lengths.


CO

BA

LT H

SS

EN

D M

ILLS

- G

EN

ER

AL

PU

RP

OS

E


AA-1208-B 12842 M42 1/4 3/8 1/2 2-5/16 2 17.20 21.04AA-1208-MB 11713 M42 1/4 3/8 5/8 2-1/2 2 20.87 24.71AA-1208-LB 12844 M42 1/4 3/8 1-1/4 3-1/16 2 20.87 24.71AA-1208-EB 12846 M42 1/4 3/8 1-3/4 3-9/16 2 25.58 31.20AA-1210-B 12848 M42 5/16 3/8 9/16 2-5/16 2 17.92 21.77AA-1210-MB 11714 M42 5/16 3/8 3/4 2-1/2 2 20.87 24.71AA-1210-LB 12850 M42 5/16 3/8 1-3/8 3-1/8 2 20.87 24.71AA-1210-EB 12852 M42 5/16 3/8 2 3-3/4 2 24.71 30.39AA-1212-B 12854 M42 3/8 3/8 9/16 2-5/16 2 17.58 21.36AA-1212-LB 12856 M42 3/8 3/8 1-1/2 3-1/4 2 20.82 24.66AA-1212-MB 11715 M42 3/8 3/8 3/4 2-1/2 2 20.87 24.71AA-1212-EB 12858 M42 3/8 3/8 2-1/2 4-1/4 2 28.61 34.29AA-1214-B 12860 M42 7/16 3/8 1 2-11/16 2 25.39 29.17AA-1614-EB 12864 M42 7/16 1/2 2-3/4 4-3/4 2 37.41 44.65AA-1616-B 12866 M42 1/2 1/2 1 3 2 28.17 34.40AA-1616-LB 12868 M42 1/2 1/2 2 4 2 31.47 38.50AA-1616-EB 12870 M42 1/2 1/2 3 5 2 37.41 44.65AA-2020-B 12872 M42 5/8 5/8 1-5/8 3-3/4 2 35.55 43.47AA-2020-LB 12874 M42 5/8 5/8 2-1/2 4-5/8 2 45.75 53.32AA-2020-EB 12876 M42 5/8 5/8 4 6-1/8 2 51.52 77.58AA-2424-B 12878 M42 3/4 3/4 1-5/8 3-7/8 2 39.80 54.85AA-2424-LB 12880 M42 3/4 3/4 3 5-1/4 2 54.51 69.22AA-2424-EB 12882 M42 3/4 3/4 4 6-1/4 2 65.44 91.50AA-2828-B 12886 M42 7/8 7/8 1-7/8 4-1/8 2 53.61 70.35AA-2432-B 12884 M42 1 3/4 1-7/8 4-1/8 2 76.61 93.35AA-3232-B 12892 M42 1 1 2 4-1/2 2 69.13 85.66AA-3232-LB 12894 M42 1 1 4 6-1/2 2 93.24 123.63AA-3232-EB 12896 M42 1 1 6 8-1/2 2 116.55 146.94

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 65


CO

BA

LT H

SS

EN

D M

ILLS - G

EN

ER

AL P

UR

PO

SE

2 FLUTE, SINGLE ENDCENTER CUTTINGLONG REACH* Used when a longer reach is required but not a longer cutting length, such as in deep slots or pockets.* Extended unfl uted neck to provide greater rigidity and to reduce defl ection.

Tolerance +.0015/-.0000

2 FLUTE, SINGLE ENDLONG REACH BALL END * Used when a longer reach is required but not a longer cutting length, such as in deep slots or pockets.* Extended unfl uted neck to provide greater rigidity and to reduce defl ection. Tolerance +.0005/-.0005. If mill diameter is greater than 5/8”, tolerance is +.001/-.001

* Used when a longer reach is required but not a longer cutting length, such as in deep slots or pockets.* Extended unfl uted neck to provide greater rigidity and to reduce defl ection.

REACH LIST COATEDTOOL NAME EDP MAT. MILL SHANK LOC LENGTH OAL FLUTES PRICE PRICE

AN-1204 10734 M42 1/8 3/8 3/8 13/16 2-9/16 2 13.30 17.20AN-1206 10736 M42 3/16 3/8 1/2 1-1/8 2-11/16 2 13.30 17.20AN-1208 10738 M42 1/4 3/8 5/8 1-1/2 3-1/16 2 13.30 17.20AN-1210 10740 M42 5/16 3/8 3/4 1-3/4 3-5/16 2 13.56 17.53AN-1212 10742 M42 3/8 3/8 3/4 1-3/4 3-5/16 2 13.49 17.46AN-1616 10744 M42 1/2 1/2 1 2-1/4 4 2 18.82 25.85AN-2020 10746 M42 5/8 5/8 1-3/8 2-3/4 4-5/8 2 27.85 35.48AN-2424 10748 M42 3/4 3/4 1-5/8 3-3/8 5-3/8 2 35.99 62.52AN-3232 10752 M42 1 1 2-1/2 5 7-1/4 2 64.08 93.34

REACH LIST COATEDTOOL NAME EDP MAT. MILL SHANK LOC LENGTH OAL FLUTES PRICE PRICE

AN-1204-B 10756 M42 1/8 3/8 3/8 13/16 2-9/16 2 16.17 20.06AN-1206-B 10758 M42 3/16 3/8 1/2 1-1/8 2-11/16 2 16.17 20.06AN-1208-B 10760 M42 1/4 3/8 5/8 1-1/2 3-1/16 2 16.17 20.06AN-1210-B 10762 M42 5/16 3/8 3/4 1-3/4 3-5/16 2 18.85 22.77AN-1212-B 10764 M42 3/8 3/8 3/4 1-3/4 3-5/16 2 18.50 22.33AN-1616-B 10766 M42 1/2 1/2 1 2-1/4 4 2 28.50 35.48AN-2020-B 10768 M42 5/8 5/8 1-3/8 2-3/4 4-5/8 2 35.39 43.11AN-2424-B 10770 M42 3/4 3/4 1-5/8 3-3/8 5-3/8 2 46.28 73.36AN-3232-B 10774 M42 1 1 2-1/2 5 7-1/4 2 81.09 110.91

Neck Diameter Reduction→

66


2 FLUTE, DOUBLE ENDCENTER CUTTINGMINIATURE* Used for general purpose milling in most materials of medium hard-ness such as steel, brass, iron, etc.

Tolerance +.0000/-.0015 If shank and mill diameters are the same, tolerance is +.0000/-.0025


BS-601 11082 M42 1/32 3/16 3/64 2 2 12.17 15.47B-601 10872 M42 1/32 3/16 3/32 2-1/4 2 13.14 16.44BS-601-1/2 11084 M42 3/64 3/16 1/16 2 2 12.17 15.47B-601-1/2 10874 M42 3/64 3/16 9/64 2-1/4 2 13.14 16.44BS-602 11086 M42 1/16 3/16 3/32 2 2 10.60 13.84B-602 10876 M42 1/16 3/16 3/16 2-1/4 2 11.46 14.76B-602-L 11048 M42 1/16 3/16 7/32 2-1/2 2 15.52 18.82BS-602-1/2 11088 M42 5/64 3/16 1/8 2 2 10.60 13.84B-602-1/2 10878 M42 5/64 3/16 15/64 2-1/4 2 11.46 14.76BS-603 11090 M42 3/32 3/16 9/64 2 2 10.60 13.84B-603 10880 M42 3/32 3/16 9/32 2-1/4 2 11.46 14.76B-603-L 11050 M42 3/32 3/16 1/2 2-5/8 2 15.52 18.82BS-603-1/2 11092 M42 7/64 3/16 5/32 2 2 10.60 13.84B-603-1/2 10882 M42 7/64 3/16 21/64 2-1/4 2 11.46 14.76BS-604 11094 M42 1/8 3/16 3/16 2 2 10.60 13.84B-604 10884 M42 1/8 3/16 3/8 2-1/4 2 11.46 14.76B-604-L 11052 M42 1/8 3/16 3/4 3-1/8 2 15.52 18.82BS-604-1/2 11096 M42 9/64 3/16 7/32 2 2 10.60 13.84B-604-1/2 10886 M42 9/64 3/16 13/32 2-1/4 2 11.46 14.76BS-605 11098 M42 5/32 3/16 15/64 2 2 10.60 13.84B-605 10888 M42 5/32 3/16 7/16 2-1/4 2 11.46 14.76B-605-L 11054 M42 5/32 3/16 7/8 3-1/4 2 15.52 18.82BS-605-1/2 11100 M42 11/64 3/16 1/4 2 2 10.60 13.84B-605-1/2 10890 M42 11/64 3/16 1/2 2-1/4 2 11.46 14.76BS-606 11102 M42 3/16 3/16 9/32 2 2 10.60 13.84B-606 10892 M42 3/16 3/16 1/2 2-1/4 2 11.46 14.76B-606-L 11056 M42 3/16 3/16 1 3-3/8 2 15.52 18.82

CO

BA

LT H

SS

EN

D M

ILLS

- G

EN

ER

AL

PU

RP

OS

E

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 67


CO

BA

LT H

SS

EN

D M

ILLS - G

EN

ER

AL P

UR

PO

SE

2 FLUTE, DOUBLE ENDCENTER CUTTING * General purpose milling in most materials of medium and tough alloy materials, such as stainless steel, nickel base alloy, brass, iron etc. * Can be used in profi ling, slotting, keyways, and pockets.

Tolerance +.0000/-.0015. If shank and mill diameters are the same, tolerance is +.0000/-.0025


B-1202-1/2 10894 M42 5/64 3/8 5/16 3-1/16 2 16.49 22.39B-1203 10896 M42 3/32 3/8 5/16 3-1/16 2 16.49 22.39B-1203-1/2 10898 M42 7/64 3/8 3/8 3-1/16 2 16.49 22.39BS-1204 11104 M42 1/8 3/8 3/16 2-3/4 2 12.82 18.71B-1204 10900 M42 1/8 3/8 3/8 3-1/16 2 14.39 20.28B-1204-1/2 10902 M42 9/64 3/8 7/16 3-1/8 2 16.49 22.39BS-1205 11106 M42 5/32 3/8 15/64 2-3/4 2 13.14 19.04B-1205 10904 M42 5/32 3/8 7/16 3-1/8 2 15.52 21.36B-1205-1/2 10906 M42 11/64 3/8 7/16 3-1/8 2 16.49 22.39BS-1206 11108 M42 3/16 3/8 9/32 2-3/4 2 13.14 19.04B-1206 10908 M42 3/16 3/8 7/16 3-1/8 2 14.39 20.28B-1206-1/2 10910 M42 13/64 3/8 1/2 3-1/8 2 16.49 22.39BS-1207 11110 M42 7/32 3/8 21/64 2-3/4 2 13.14 19.04B-1207 10912 M42 7/32 3/8 1/2 3-1/8 2 15.90 21.79B-1207-1/2 10914 M42 15/64 3/8 1/2 3-1/8 2 17.03 22.88BS-1208 11112 M42 1/4 3/8 3/8 2-3/4 2 13.14 19.04B-1208 10916 M42 1/4 3/8 1/2 3-1/8 2 14.82 20.71B-1208-1/2 10918 M42 17/64 3/8 9/16 3-1/8 2 17.03 22.88B-1209 10920 M42 9/32 3/8 9/16 3-1/8 2 15.90 21.79B-1209-1/2 10922 M42 19/64 3/8 9/16 3-1/8 2 17.03 22.88B-1210 10924 M42 5/16 3/8 9/16 3-1/8 2 14.82 20.71B-1210-1/2 10926 M42 21/64 3/8 9/16 3-1/8 2 17.03 22.88B-1211 10928 M42 11/32 3/8 9/16 3-1/8 2 16.22 22.12B-1211-1/2 10930 M42 23/64 3/8 9/16 3-1/8 2 17.03 22.88B-1212 10932 M42 3/8 3/8 9/16 3-1/8 2 14.82 20.71B-1612-1/2 10934 M42 25/64 1/2 13/16 3-3/4 2 26.44 36.83B-1613 10936 M42 13/32 1/2 13/16 3-3/4 2 23.96 34.45B-1613-1/2 10938 M42 27/64 1/2 13/16 3-3/4 2 26.44 36.83B-1614 10940 M42 7/16 1/2 13/16 3-3/4 2 23.96 34.45B-1614-1/2 10942 M42 29/64 1/2 13/16 3-3/4 2 26.44 36.83B-1615 10944 M42 15/32 1/2 13/16 3-3/4 2 23.96 34.45B-1615-1/2 10946 M42 31/64 1/2 13/16 3-3/4 2 26.44 36.83B-1616 10948 M42 1/2 1/2 13/16 3-3/4 2 22.98 33.42B-2017 10950 M42 17/32 5/8 1-1/8 5 2 37.37 48.62B-2018 10952 M42 9/16 5/8 1-1/8 5 2 33.81 45.50B-2019 10954 M42 19/32 5/8 1-1/8 5 2 37.37 48.62B-2020 10956 M42 5/8 5/8 1-1/8 5 2 33.81 45.50B-2421 10958 M42 21/32 3/4 1-5/16 5 2 47.05 68.36B-2422 10960 M42 11/16 3/4 1-5/16 5 2 45.41 68.93B-2423 10962 M42 23/32 3/4 1-5/16 5 2 48.87 71.00B-2424 10964 M42 3/4 3/4 1-5/16 5 2 43.10 65.38B-2825 10966 M42 25/32 7/8 1-9/16 5-1/2 2 62.68 84.70B-2826 10968 M42 13/16 7/8 1-9/16 5-1/2 2 57.52 80.60B-2828 10972 M42 7/8 7/8 1-9/16 5-1/2 2 57.52 80.60B-3230 10976 M42 15/16 1 1-5/8 5-7/8 2 67.57 115.71B-3232 10980 M42 1 1 1-5/8 5-7/8 2 72.24 124.21

68


2 FLUTE, DOUBLE ENDMINIATURE BALL END, NO FLAT* Used for radius and contouring part surfaces.* Materials ranging from nickel base alloy, stainless, tough alloys, and abrasive materials.



BS-601-B 11114 M42 1/32 3/16 3/64 2 2 19.09 22.39B-601-B 10982 M42 1/32 3/16 3/32 2-1/4 2 19.47 22.77BS-601-1/2-B 11116 M42 3/64 3/16 1/16 2 2 19.09 22.39B-601-1/2-B 10984 M42 3/64 3/16 9/64 2-1/4 2 19.47 22.77BS-602-B 11118 M42 1/16 3/16 3/32 2 2 17.47 20.77B-602-B 10986 M42 1/16 3/16 3/16 2-1/4 2 18.06 21.36B-602-LB 11058 M42 1/16 3/16 7/32 2-1/2 2 24.10 27.52BS-602-1/2-B 11120 M42 5/64 3/16 1/8 2 2 17.47 20.77B-602-1/2-B 10988 M42 5/64 3/16 15/64 2-1/4 2 18.06 21.36BS-603-B 11122 M42 3/32 3/16 9/64 2 2 17.47 20.77B-603-B 10990 M42 3/32 3/16 9/32 2-1/4 2 18.06 21.36B-603-LB 11060 M42 3/32 3/16 1/2 2-5/8 2 24.10 27.52BS-603-1/2-B 11124 M42 7/64 3/16 5/32 2 2 17.47 20.77B-603-1/2-B 10992 M42 7/64 3/16 21/64 2-1/4 2 18.06 21.36BS-604-B 11126 M42 1/8 3/16 3/16 2 2 17.47 20.77B-604-B 10994 M42 1/8 3/16 3/8 2-1/4 2 18.06 21.36B-604-LB 11062 M42 1/8 3/16 3/4 3-1/8 2 24.10 27.52BS-604-1/2-B 11128 M42 9/64 3/16 7/32 2 2 17.47 20.77B-604-1/2-B 10996 M42 9/64 3/16 13/32 2-1/4 2 18.06 21.36BS-605-B 11130 M42 5/32 3/16 15/64 2 2 17.47 20.77B-605-B 10998 M42 5/32 3/16 7/16 2-1/4 2 18.06 21.36B-605-LB 11064 M42 5/32 3/16 7/8 3-1/4 2 24.10 27.52BS-605-1/2-B 11132 M42 11/64 3/16 1/4 2 2 17.81 21.17B-605-1/2-B 11000 M42 11/64 3/16 1/2 2-1/4 2 18.06 21.36BS-606-B 11134 M42 3/16 3/16 9/32 2 2 17.47 20.77B-606-B 11002 M42 3/16 3/16 1/2 2-1/4 2 18.06 21.36B-606-LB 11066 M42 3/16 3/16 1 3-3/8 2 24.10 27.52


B-1203-B 11004 M42 3/32 3/8 5/16 3-1/16 2 24.44 30.07B-1204-B 11006 M42 1/8 3/8 3/8 3-1/16 2 22.50 28.18B-1205-B 11008 M42 5/32 3/8 7/16 3-1/8 2 22.50 28.18B-1206-B 11010 M42 3/16 3/8 7/16 3-1/8 2 22.50 28.18B-1207-B 11012 M42 7/32 3/8 1/2 3-1/8 2 23.20 28.77B-1208-B 11014 M42 1/4 3/8 1/2 3-1/8 2 23.20 28.77B-1209-B 11016 M42 9/32 3/8 9/16 3-1/8 2 27.15 32.72B-1210-B 11018 M42 5/16 3/8 9/16 3-1/8 2 25.96 31.58B-1211-B 11020 M42 11/32 3/8 9/16 3-1/8 2 27.15 32.72B-1212-B 11022 M42 3/8 3/8 9/16 3-1/8 2 25.42 30.99B-1613-B 11024 M42 13/32 1/2 13/16 3-3/4 2 38.72 48.67B-1614-B 11026 M42 7/16 1/2 13/16 3-3/4 2 38.72 48.67B-1615-B 11028 M42 15/32 1/2 13/16 3-3/4 2 38.72 48.67B-1616-B 11030 M42 1/2 1/2 13/16 3-3/4 2 38.02 48.02B-2018-B 11032 M42 9/16 5/8 1-1/8 5 2 52.46 63.27B-2020-B 11034 M42 5/8 5/8 1-1/8 5 2 48.40 59.22B-2422-B 11036 M42 11/16 3/4 1-5/16 5 2 66.48 87.26B-2424-B 11038 M42 3/4 3/4 1-5/16 5 2 63.22 83.50

2 FLUTE, DOUBLE ENDBALL END* Used for radius or contouring part surfaces.

Tolerance +.0005/-.0005. If shank and mill diameters are the same, tolerance is +.0000/-.0025. If mill diameter is greater than 5/8”, tolerance is +.001/-.001

CO

BA

LT H

SS

EN

D M

ILLS

- G

EN

ER

AL

PU

RP

OS

E

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 69


CO

BA

LT H

SS

EN

D M

ILLS - G

EN

ER

AL P

UR

PO

SE

4 FLUTE, SINGLE ENDMINIATURE, NO FLAT* Used for general purpose millng in most materials of medium hardness such as steel, brass, iron, etc.


MULTIPLE FLUTE, SINGLE ENDCENTER CUTTING * Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron, etc.* Standard, stub, medium, long, and extra long lengths.

Tolerance +.0015/-.0000


C-602 11136 M42 1/16 3/16 3/16 1-1/2 4 8.49 11.19C-602-1/2 11138 M42 5/64 3/16 1/4 1-1/2 4 8.49 11.19C-603 11140 M42 3/32 3/16 9/32 1-1/2 4 8.49 11.19C-603-1/2 11142 M42 7/64 3/16 21/64 1-1/2 4 8.49 11.19C-604 11144 M42 1/8 3/16 3/8 1-1/2 4 8.49 11.19C-604-1/2 11146 M42 9/64 3/16 27/64 1-1/2 4 8.49 11.19C-605 11148 M42 5/32 3/16 7/16 1-1/2 4 8.49 11.19C-605-1/2 11150 M42 11/64 3/16 1/2 1-1/2 4 8.49 11.19C-606 11152 M42 3/16 3/16 1/2 1-1/2 4 8.65 11.41C-808 11154 M42 1/4 1/4 5/8 2 4 12.71 15.79


CCS-1204 11434 M42 1/8 3/8 3/16 2-1/8 4 10.92 14.66CC-1204 11432 M42 1/8 3/8 3/8 2-5/16 4 11.14 14.98CC-1204-M 12972 M42 1/8 3/8 1/2 2-3/8 4 15.25 19.09CC-1204-L 12974 M42 1/8 3/8 3/4 2-5/8 4 15.79 19.63CCS-1205 11438 M42 5/32 3/8 3/16 2-1/8 4 10.92 14.66CC-1205 11436 M42 5/32 3/8 7/16 2-5/16 4 11.14 14.98CC-1205-M 12976 M42 5/32 3/8 5/8 2-1/2 4 15.25 19.09CC-1205-L 12978 M42 5/32 3/8 3/4 2-5/8 4 15.79 19.63CCS-1206 11442 M42 3/16 3/8 3/16 2-1/16 4 10.92 14.66CC-1206 11440 M42 3/16 3/8 1/2 2-3/8 4 11.14 14.98CC-1206-M 12980 M42 3/16 3/8 5/8 2-1/2 4 15.25 19.09CC-1206-L 11582 M42 3/16 3/8 3/4 2-5/8 4 15.79 19.63CC-1206-E 12962 M42 3/16 3/8 1-1/4 3-1/8 4 17.81 22.02CCS-1207 11446 M42 7/32 3/8 1/4 2-3/16 4 10.92 14.66CC-1207 11444 M42 7/32 3/8 1/2 2-3/8 4 11.14 14.98CC-1207-M 12982 M42 7/32 3/8 7/8 2-3/4 4 15.25 19.09CC-1207-L 11584 M42 7/32 3/8 1-1/4 3-1/8 4 15.79 19.63CC-1207-E 12964 M42 7/32 3/8 1-1/2 3-5/16 4 18.59 22.80CCS-1208 11450 M42 1/4 3/8 1/4 2-1/8 4 10.92 14.66CC-1208 11448 M42 1/4 3/8 5/8 2-7/16 4 11.14 14.98CC-1208-M 11588 M42 1/4 3/8 7/8 2-11/16 4 15.25 19.09CC-1208-L 11586 M42 1/4 3/8 1-1/4 3-1/16 4 15.79 19.63CC-1208-E 11536 M42 1/4 3/8 1-3/4 3-9/16 4 17.90 23.74CC-1208-EE 11538 M42 1/4 3/8 2-1/4 4-1/8 4 25.16 31.29CCS-1209 11454 M42 9/32 3/8 5/16 2-1/8 4 11.41 15.14CC-1209 11452 M42 9/32 3/8 11/16 2-1/2 4 11.63 15.52CC-1209-M 12984 M42 9/32 3/8 1 2-3/4 4 15.25 19.09CC-1209-L 11590 M42 9/32 3/8 1-3/8 3-1/8 4 15.79 19.63CC-1209-E 12966 M42 9/32 3/8 1-3/4 3-5/8 4 19.88 25.95CCS-1210 11458 M42 5/16 3/8 5/16 2-1/16 4 11.41 15.14

70


MULTIPLE FLUTE, SINGLE ENDCENTER CUTTING - CONTINUED


CC-1210 11456 M42 5/16 3/8 3/4 2-1/2 4 11.63 15.52CC-1210-M 12986 M42 5/16 3/8 1 2-3/4 4 14.55 18.44CC-1210-L 11592 M42 5/16 3/8 1-3/8 3-1/8 4 14.98 18.82CC-1210-E 11540 M42 5/16 3/8 2 3-3/4 4 19.49 25.61CCS-1211 11462 M42 11/32 3/8 3/8 2-1/8 4 11.41 15.43CC-1211 11460 M42 11/32 3/8 3/4 2-1/2 4 11.63 15.30CC-1211-M 12988 M42 11/32 3/8 1 2-3/4 4 15.25 19.09CC-1211-L 11594 M42 11/32 3/8 1-1/2 3-1/4 4 16.01 19.85CC-1211-E 12968 M42 11/32 3/8 2-1/2 4-1/4 4 19.52 25.47CCS-1212 11466 M42 3/8 3/8 3/8 2-1/8 4 11.41 15.14CC-1212 11464 M42 3/8 3/8 3/4 2-1/2 4 11.63 15.52CC-1212-M 12990 M42 3/8 3/8 1 2-3/4 4 14.55 18.44CC-1212-L 11596 M42 3/8 3/8 1-1/2 3-1/4 4 15.25 19.09CC-1212-E 11542 M42 3/8 3/8 2-1/2 4-1/4 4 19.52 25.47CC-1213 11174 M42 13/32 3/8 1 2-11/16 4 15.90 22.01CCS-1214 12956 M42 7/16 3/8 9/16 2-1/4 4 15.68 21.79CC-1214 11468 M42 7/16 3/8 1 2-11/16 4 15.90 22.01CC-1614-M 12992 M42 7/16 1/2 1-1/4 3-1/4 4 23.74 29.85CC-1614-L 12994 M42 7/16 1/2 1-3/4 3-3/4 4 25.63 32.61CC-1614-E 12970 M42 7/16 1/2 2-3/4 4-3/4 4 29.74 37.10CC-1615 11180 M42 15/32 1/2 1-1/4 3-1/4 4 17.47 23.58CCS-1616 12957 M42 1/2 1/2 1/2 2-1/2 4 16.87 22.93CC-1216 11470 M42 1/2 3/8 1 2-11/16 4 15.90 22.01CC-1616 11472 M42 1/2 1/2 1-1/4 3-1/4 4 14.82 20.93CC-1616-A 15050 M42 1/2 1/2 1-1/4 3-1/4 6 16.27 22.56CC-1616-M 12996 M42 1/2 1/2 1-5/8 3-5/8 4 20.98 28.07CC-1616-L 11598 M42 1/2 1/2 2 4 4 19.58 26.61CC-1616-E 11544 M42 1/2 1/2 3 5 4 24.98 32.39CC-1616-EE 11344 M42 1/2 1/2 4 6 4 30.77 44.56CC-1617 11184 M42 17/32 1/2 1-3/8 3-3/8 4 20.77 28.07CC-1618 11474 M42 9/16 1/2 1-3/8 3-3/8 4 20.77 28.07CC-1618-L 11392 M42 9/16 1/2 2-1/2 4-1/2 4 29.21 36.68CC-1618-E 11346 M42 9/16 1/2 3-1/2 5-1/2 4 35.67 43.59CC-1619 11188 M42 19/32 1/2 1-3/8 3-3/8 4 23.04 30.66CCS-2020 12958 M42 5/8 5/8 5/8 2-3/4 4 21.96 28.61CC-1620 11190 M42 5/8 1/2 1-3/8 3-3/8 4 21.96 29.53CC-2020 11476 M42 5/8 5/8 1-5/8 3-3/4 4 21.96 29.53CC-2020-A 15054 M42 5/8 5/8 1-5/8 3-3/4 6 22.38 30.10CC-2020-M 12998 M42 5/8 5/8 2 4-1/8 4 29.09 36.72CC-2020-L 11600 M42 5/8 5/8 2-1/2 4-5/8 4 28.88 36.50CC-2020-E 11546 M42 5/8 5/8 4 6-1/8 4 36.02 51.54CC-2020-EE 11548 M42 5/8 5/8 5 7-1/8 4 50.10 66.17CC-2022 11478 M42 11/16 5/8 1-5/8 3-3/4 4 28.40 41.19CCS-2424 12960 M42 3/4 3/4 3/4 3 4 28.61 38.83CC-2024 15058 M42 3/4 5/8 1-5/8 3-3/4 4 29.02 43.97CC-2424 11480 M42 3/4 3/4 1-5/8 3-7/8 4 28.61 43.32CC-2424-A 15062 M42 3/4 3/4 1-5/8 3-7/8 6 31.12 47.18CC-2424-M 13000 M42 3/4 3/4 2-1/4 4-1/2 4 35.80 51.27CC-2424-L 11602 M42 3/4 3/4 3 5-1/4 4 42.58 58.64CC-2424-E 11550 M42 3/4 3/4 4 6-1/4 4 49.21 76.58CC-2424-EE 11552 M42 3/4 3/4 6 8-1/4 4 65.55 93.97CC-2426 11482 M42 13/16 3/4 1-7/8 4-1/8 4 33.85 48.56CC-1628 15854 M42 7/8 1/2 1-5/8 3-5/8 4 36.09 51.70CC-2428 15066 M42 7/8 3/4 1-7/8 4-1/8 4 37.10 51.81

CO

BA

LT H

SS

EN

D M

ILLS

- G

EN

ER

AL

PU

RP

OS

E

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 71


CO

BA

LT H

SS

EN

D M

ILLS - G

EN

ER

AL P

UR

PO

SE

MULTIPLE FLUTE, SINGLE ENDCENTER CUTTING - CONTINUED


CC-2828 11484 M42 7/8 7/8 1-7/8 4-1/8 4 37.10 51.81CC-2828-A 15096 M42 7/8 7/8 1-7/8 4-1/8 6 38.72 54.13CC-2828-L 11604 M42 7/8 7/8 3-1/2 5-3/4 4 53.14 81.56CC-2828-E 11554 M42 7/8 7/8 5 7-1/4 4 67.35 95.77CC-2430 15068 M42 15/16 3/4 1-7/8 4-1/8 4 42.59 57.71CC-2830 11486 M42 15/16 7/8 1-7/8 4-1/8 4 42.39 57.38CC-2032 15060 M42 1 5/8 1-7/8 4 4 44.51 60.68CC-2432 15070 M42 1 3/4 1-7/8 4-1/8 4 44.51 60.68CC-1632 15856 M42 1 1/2 1-7/8 3-7/8 4 41.15 57.27CC-3232 11488 M42 1 1 2 4-1/2 4 44.51 60.68CC-3232-A 15098 M42 1 1 2 4-1/2 6 47.12 64.24CC-3232-M 11608 M42 1 1 3 5-1/2 4 60.21 77.74CC-3232-L 11606 M42 1 1 4 6-1/2 4 66.46 97.13CC-3232-E 11556 M42 1 1 6 8-1/2 4 84.90 115.57CC-3232-EE 11558 M42 1 1 8 10-1/2 4 103.13 137.99CC-2434 15072 M42 1-1/16 3/4 1-5/8 3-7/8 6 62.24 78.90CC-2436 15074 M42 1-1/8 3/4 1-5/8 3-7/8 6 62.24 78.90CC-3236 11490 M42 1-1/8 1 2 4-1/2 4 62.24 78.90CC-2438 15076 M42 1-3/16 3/4 1-5/8 3-7/8 6 68.73 85.39CC-2440 15078 M42 1-1/4 3/4 1-5/8 3-7/8 6 68.73 85.39CC-3240 15102 M42 1-1/4 1 2 4-1/2 6 68.73 85.39CC-4040 11492 M42 1-1/4 1-1/4 2 4-1/2 4 68.73 85.39CC-4040-A 11662 M42 1-1/4 1-1/4 2 4-1/2 6 68.73 85.39CC-4040-L 11610 M42 1-1/4 1-1/4 4 6-1/2 4 97.23 127.63CC-4040-E 11560 M42 1-1/4 1-1/4 6 8-1/2 4 126.94 158.45CCP-2442 15080 M42 1-5/16 3/4 2 4-1/4 6 118.24 171.88CCP-2444 15082 M42 1-3/8 3/4 2 4-1/4 6 109.19 161.86CCP-2446 15084 M42 1-7/16 3/4 2 4-1/4 6 118.24 171.88CCP-2448 15086 M42 1-1/2 3/4 2 4-1/4 6 112.59 165.21CCP-3248 15106 M42 1-1/2 1 2 4-1/2 6 116.94 171.60CC-4048 11494 M7 1-1/2 1-1/4 2 4-1/2 4 79.98 134.69CCP-4048 11664 M42 1-1/2 1-1/4 2 4-1/2 4 110.25 166.53CCP-4048-A 11666 M42 1-1/2 1-1/4 2 4-1/2 6 105.18 158.81CC-4048-L 11612 M7 1-1/2 1-1/4 4 6-1/2 4 121.00 202.25CCP-4048-E 11698 M42 1-1/2 1-1/4 8 10-1/2 4 208.48 291.94CCP-2452 15088 M42 1-5/8 3/4 2 4-1/4 6 146.08 199.77CCP-2456 15090 M42 1-3/4 3/4 2 4-1/4 6 159.91 213.55CCP-4056 15108 M42 1-3/4 1-1/4 2 4-1/2 6 149.61 203.24CCP-2460 15092 M42 1-7/8 3/4 2 4-1/4 6 184.33 238.02CCP-2464 15094 M42 2 3/4 2 4-1/4 6 184.33 238.02CCP-4064 11668 M42 2 1-1/4 2 4-1/2 4 143.05 199.33CCP-4064-A 11670 M42 2 1-1/4 2 4-1/2 6 143.05 199.33CCP-4064-L 11712 M42 2 1-1/4 4 6-1/2 4 241.53 326.17

72


MULTIPLE FLUTE, SINGLE END NON-CENTER CUTTING* Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron, etc.* Can be used in profi ling, keyways, and pockets. * Not to be used for plunge cutting.* Standard, stub, medium, long, and extra long lengths.

Tolerance +.0015/-.0000

CO

BA

LT H

SS

EN

D M

ILLS

- G

EN

ER

AL

PU

RP

OS

E


C-1621 11192 M42 21/32 1/2 1-5/8 3-5/8 4 26.66 39.32C-1622 11194 M42 11/16 1/2 1-5/8 3-5/8 4 26.91 41.12C-2022 11218 M42 11/16 5/8 1-5/8 3-3/4 4 25.47 38.82C-1623 11196 M42 23/32 1/2 1-5/8 3-5/8 4 28.34 43.91CS-1624 16481 M42 3/4 1/2 5/8 2-5/8 4 27.08 42.59CS-1624-A 16482 M42 3/4 1/2 5/8 2-5/8 6 33.96 49.48C-1624 11198 M42 3/4 1/2 1-5/8 3-5/8 4 24.98 40.51C-2024 11220 M42 3/4 5/8 1-5/8 3-3/4 4 26.78 43.54C-2424-A 16491 M42 3/4 3/4 1-1/2 3-7/8 6 38.35 53.82C-2424 11238 M42 3/4 3/4 1-5/8 3-7/8 4 25.85 41.32C-2424-L 11396 M42 3/4 3/4 3 5-1/4 4 35.21 51.11C-2424-E 11352 M42 3/4 3/4 4 6-1/4 4 45.81 74.68C-2424-EE 11354 M42 3/4 3/4 6 8-1/4 4 59.92 87.23C-1625 11200 M42 25/32 1/2 1-5/8 3-5/8 4 37.26 53.66C-1626 11202 M42 13/16 1/2 1-5/8 3-5/8 4 33.85 48.56C-2026 11222 M42 13/16 5/8 1-7/8 4 4 30.89 46.17C-2026-A 11224 M42 13/16 5/8 1-7/8 4 6 34.28 51.52C-2426 11240 M42 13/16 3/4 1-7/8 4-1/8 4 34.20 50.26C-1627 11204 M42 27/32 1/2 1-5/8 3-5/8 4 36.34 51.75CS-1628 16483 M42 7/8 1/2 5/8 2-5/8 4 34.66 49.38CS-1628-A 16484 M42 7/8 1/2 5/8 2-5/8 6 40.70 55.42C-1628 11206 M42 7/8 1/2 1-5/8 3-5/8 4 34.66 49.37C-2028 11226 M42 7/8 5/8 1-7/8 4 4 33.99 49.97C-2028-A 11228 M42 7/8 5/8 1-7/8 4 6 32.88 48.29C-2428 11242 M42 7/8 3/4 1-7/8 4-1/8 4 32.29 46.99C-2828 11268 M42 7/8 7/8 1-7/8 4-1/8 4 35.66 51.98C-2828-L 11398 M42 7/8 7/8 3-1/2 5-3/4 4 44.98 72.87C-2828-E 11356 M42 7/8 7/8 5 7-1/4 4 59.65 88.07C-1629 11208 M42 29/32 1/2 1-7/8 3-7/8 4 42.41 57.74C-1630 11210 M42 15/16 1/2 1-7/8 3-7/8 4 41.62 56.67C-2030-A 11232 M42 15/16 5/8 1-7/8 4 6 37.75 53.75C-2430 11244 M42 15/16 3/4 1-7/8 4-1/8 4 39.05 54.66C-2830 11270 M42 15/16 7/8 1-7/8 4-1/8 4 37.81 52.81C-1631 11212 M42 31/32 1/2 1-7/8 3-7/8 4 40.83 57.00CS-1632 16485 M42 1 1/2 3/4 2-3/4 4 38.40 54.52CS-1632-A8 16486 M42 1 1/2 3/4 2-3/4 8 40.23 56.35C-1632 11214 M42 1 1/2 1-7/8 3-7/8 4 37.10 53.21CS-2032-A8 16487 M42 1 5/8 3/4 2-7/8 8 50.73 66.85C-2032 11234 M42 1 5/8 1-7/8 4 4 37.10 53.21C-2032-A 11236 M42 1 5/8 1-7/8 4 6 37.10 53.21CS-2432 16492 M42 1 3/4 3/4 3 4 38.40 54.52CS-2432-A8 16493 M42 1 3/4 3/4 3 8 51.96 68.07C-2432-A8 16494 M42 1 3/4 1-1/2 3-7/8 8 49.79 65.91C-2432 11246 M42 1 3/4 1-7/8 4-1/8 4 37.10 53.21C-2832 11272 M42 1 7/8 1-7/8 4-1/8 4 40.39 57.97C-3232 11278 M42 1 1 2 4-1/2 4 39.42 55.59C-3232-M 11400 M42 1 1 3 5-1/2 4 50.19 67.06C-3232-L 11402 M42 1 1 4 6-1/2 4 58.35 88.96C-3232-E 11358 M42 1 1 6 8-1/2 4 73.81 105.65C-3232-EE 11360 M42 1 1 8 10-1/2 4 96.05 131.66C-2434 11248 M42 1-1/16 3/4 2 4-1/4 6 63.76 80.42C-3234 11280 M42 1-1/16 1 2 4-1/2 6 62.24 78.90CS-2036-A8 16488 M42 1-1/8 5/8 3/4 2-7/8 8 57.54 74.20CS-2436-A 16495 M42 1-1/8 3/4 3/4 3 6 57.54 74.20

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 73


CO

BA

LT H

SS

EN

D M

ILLS - G

EN

ER

AL P

UR

PO

SE

MULTIPLE FLUTE, SINGLE END NON-CENTER CUTTING - CONTINUED


CS-2436-A8 16497 M42 1-1/8 3/4 3/4 3 8 62.22 78.88C-2436-A 16496 M42 1-1/8 3/4 1-1/2 3-7/8 6 57.54 74.20C-2436-A8 16498 M42 1-1/8 3/4 1-1/2 3-7/8 8 65.92 82.58C-2436 11250 M42 1-1/8 3/4 2 4-1/4 6 57.54 74.20C-3236 11282 M42 1-1/8 1 2 4-1/2 6 60.78 78.20C-3236-L 11404 M42 1-1/8 1 4 6-1/2 6 81.69 112.62C-2438 11252 M42 1-3/16 3/4 2 4-1/4 6 69.27 85.99C-3238 11284 M42 1-3/16 1 2 4-1/2 6 67.49 84.20CS-2040-A 16489 M42 1-1/4 5/8 3/4 2-7/8 6 63.06 79.71CS-2440-A 16499 M42 1-1/4 3/4 3/4 3 6 63.06 79.71C-2440-A 16500 M42 1-1/4 3/4 1-1/2 3-7/8 6 63.06 79.71C-2440-A8 16501 M42 1-1/4 3/4 1-1/2 3-7/8 8 71.27 87.93C-2440 11254 M42 1-1/4 3/4 2 4-1/4 6 63.06 79.71C-3240 11286 M42 1-1/4 1 2 4-1/2 6 61.38 78.09C-4040 11296 M42 1-1/4 1-1/4 2 4-1/2 6 62.85 80.04C-4040-M 11412 M42 1-1/4 1-1/4 3 5-1/2 4 74.36 91.77C-3240-L 11406 M42 1-1/4 1 4 6-1/2 6 90.87 121.58C-4040-L 11414 M42 1-1/4 1-1/4 4 6-1/2 6 86.26 115.24C-4040-E 11362 M42 1-1/4 1-1/4 6 8-1/2 6 118.81 149.15C-3242 11288 M7 1-5/16 1 2 4-1/2 6 75.39 133.33CS-2044-A 16490 M7 1-3/8 5/8 3/4 2-7/8 6 70.52 123.20CS-2444-A 16502 M7 1-3/8 3/4 3/4 3 6 70.52 123.20C-2444-A 16503 M7 1-3/8 3/4 1-1/2 3-7/8 6 70.52 123.20C-2444 11256 M7 1-3/8 3/4 2 4-1/4 6 70.52 123.19C-3244 11290 M7 1-3/8 1 2 4-1/2 6 63.45 117.08C-4044 11298 M7 1-3/8 1-1/4 2 4-1/2 6 82.35 144.25C-3244-L 11408 M7 1-3/8 1 4 6-1/2 6 101.10 180.02C-3246 11292 M7 1-7/16 1 2 4-1/2 6 80.27 134.97CS-2448-A 16504 M7 1-1/2 3/4 3/4 3 6 79.06 131.68C-2448-A 16505 M7 1-1/2 3/4 1-1/2 3-7/8 6 79.06 131.68C-2448-A8 16506 M7 1-1/2 3/4 2 4-1/4 8 103.98 156.59C-2448 11258 M7 1-1/2 3/4 2 4-1/4 6 79.06 131.68C-3248 11294 M7 1-1/2 1 2 4-1/2 6 70.25 122.92CP-4048 15046 M42 1-1/2 1-1/4 2 4-1/2 6 105.18 158.81C-4048-M 11416 M7 1-1/2 1-1/4 3 5-1/2 4 87.04 143.27C-3248-L 11410 M7 1-1/2 1 4 6-1/2 6 108.86 191.59C-4048-L 11418 M7 1-1/2 1-1/4 4 6-1/2 6 101.92 179.37C-4048-E 11364 M7 1-1/2 1-1/4 8 10-1/2 6 162.56 246.02C-4050 11302 M7 1-9/16 1-1/4 2 4-1/2 6 86.16 139.85C-2452 11260 M7 1-5/8 3/4 2 4-1/4 6 85.99 138.66C-4052 11304 M7 1-5/8 1-1/4 2 4-1/2 6 84.21 139.44C-2456-A 16507 M7 1-3/4 3/4 1-1/2 3-7/8 6 96.85 150.54C-2456 11262 M7 1-3/4 3/4 2 4-1/4 6 96.85 150.54C-4056 11306 M7 1-3/4 1-1/4 2 4-1/2 6 87.15 140.79C-4056-L 11420 M7 1-3/4 1-1/4 4 6-1/2 6 129.47 208.39C-4056-E 11366 M7 1-3/4 1-1/4 8 10-1/2 8 222.20 305.72C-2460 11264 M7 1-7/8 3/4 2 4-1/4 6 97.61 150.28C-2464 11266 M7 2 3/4 2 4-1/4 6 110.19 163.88C-4064-A 11312 M7 2 1-1/4 2 4-1/2 6 105.51 161.73C-4064 11314 M7 2 1-1/4 2 4-1/2 8 107.02 164.16CP-4064 15048 M42 2 1-1/4 2 4-1/2 6 136.49 190.18C-4064-M 11424 M7 2 1-1/4 3 5-1/2 6 137.89 195.24C-6464 11326 M7 2 2 4 7-3/4 4 171.99 250.96C-6464-A 11328 M7 2 2 4 7-3/4 6 180.25 263.09C-4064-L 11426 M7 2 1-1/4 4 6-1/2 8 175.58 263.41C-6464-L 11430 M7 2 2 6 9-3/4 6 214.56 303.76C-6464-EE 11372 M7 2 2 10 13-3/4 6 329.95 449.24C-4068 11316 M7 2-1/8 1-1/4 2 4-1/2 4 145.97 248.50C-4072 11318 M7 2-1/4 1-1/4 2 4-1/2 4 165.76 263.55C-4080-A 11322 M7 2-1/2 1-1/4 2 4-1/2 6 187.77 287.42

74



CC-1204-B 11496 M42 1/8 3/8 3/8 2-5/16 4 20.93 24.82CC-1205-B 11498 M42 5/32 3/8 7/16 2-5/16 4 20.93 24.82CC-1206-B 11500 M42 3/16 3/8 1/2 2-3/8 4 20.93 24.82CC-1206-LB 11614 M42 3/16 3/8 3/4 2-5/8 4 23.85 27.69CC-1207-B 11502 M42 7/32 3/8 1/2 2-3/8 4 20.93 24.82CC-1208-B 11504 M42 1/4 3/8 3/4 2-9/16 4 20.93 24.82CC-1208-LB 11618 M42 1/4 3/8 1-1/4 3-1/16 4 25.04 28.88CC-1208-EB 11564 M42 1/4 3/8 1-3/4 3-9/16 4 28.93 34.61CC-1209-B 11506 M42 9/32 3/8 11/16 2-1/2 4 22.55 26.44CC-1209-LB 11620 M42 9/32 3/8 1-3/8 3-1/8 4 25.03 29.00CC-1210-B 11508 M42 5/16 3/8 1 2-3/4 4 20.93 24.82CC-1210-LB 11622 M42 5/16 3/8 1-3/8 3-1/8 4 24.55 28.45CC-1210-EB 11566 M42 5/16 3/8 2 3-3/4 4 30.34 36.29CC-1211-B 11510 M42 11/32 3/8 3/4 2-1/2 4 22.55 26.44CC-1211-LB 11624 M42 11/32 3/8 1-1/2 3-1/4 4 27.12 31.03CC-1212-B 11512 M42 3/8 3/8 1 2-3/4 4 22.55 26.44CC-1212-LB 11626 M42 3/8 3/8 1-1/2 3-1/4 4 24.55 28.45CC-1212-EB 11568 M42 3/8 3/8 2-1/2 4-1/4 4 28.93 34.61CC-1214-B 11514 M42 7/16 3/8 1 2-11/16 4 29.36 35.42CC-1216-B 11516 M42 1/2 3/8 1 2-11/16 4 29.36 35.42CC-1616-B 11518 M42 1/2 1/2 1-1/4 3-1/4 4 29.09 35.21CC-1616-LB 11628 M42 1/2 1/2 2 4 4 32.34 39.37CC-1616-EB 11570 M42 1/2 1/2 3 5 4 38.18 45.21CC-2020-B 11520 M42 5/8 5/8 1-5/8 3-3/4 4 36.83 44.45CC-2020-LB 11630 M42 5/8 5/8 2-1/2 4-5/8 4 46.24 53.81CC-2020-EB 11572 M42 5/8 5/8 4 6-1/8 4 56.08 70.79CC-2022-B 11522 M42 11/16 5/8 1-5/8 3-3/4 4 46.99 59.11CC-2424-B 11524 M42 3/4 3/4 1-5/8 3-7/8 4 47.91 62.62CC-2424-LB 11632 M42 3/4 3/4 3 5-1/4 4 58.08 72.84CC-2424-EB 11574 M42 3/4 3/4 4 6-1/4 4 68.84 92.58CC-2828-B 11526 M42 7/8 7/8 1-7/8 4-1/8 4 68.46 83.17CC-2828-LB 11634 M42 7/8 7/8 3-1/2 5-3/4 4 82.62 107.28CC-2828-EB 11576 M42 7/8 7/8 5 7-1/4 4 89.14 114.98CC-3232-B 11528 M42 1 1 2 4-1/2 4 81.98 98.15CC-3232-LB 11636 M42 1 1 4 6-1/2 4 99.87 130.20CC-3232-EB 11578 M42 1 1 6 8-1/2 4 114.99 144.76CC-3236-B 11530 M42 1-1/8 1 2 4-1/2 4 97.83 114.54CC-4040-B 11532 M42 1-1/4 1-1/4 2 4-1/2 4 104.43 121.14CC-4040-LB 11638 M42 1-1/4 1-1/4 4 6-1/2 4 148.45 180.69CC-4040-EB 11580 M42 1-1/4 1-1/4 6 8-1/2 4 185.92 218.10CC-4048-B 11534 M7 1-1/2 1-1/4 2 4-1/2 4 127.67 181.36

4 FLUTE, SINGLE END BALL END * Used for radius or contouring of part surfaces.* Materials ranging from nickel base alloy, stainless, tough alloys, and abrasive materials.


* Used for radius or contouring of part surfaces.* Materials ranging from nickel base alloy, stainless, tough alloys, and abrasive materials.


CO

BA

LT H

SS

EN

D M

ILLS

- G

EN

ER

AL

PU

RP

OS

E

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 75


CO

BA

LT H

SS

EN

D M

ILLS - G

EN

ER

AL P

UR

PO

SE

NECK LIST COATEDTOOL NAME EDP MAT. MILL SHANK LOC OAL LENGTH FLUTES PRICE PRICE

CCN-1212 11235 M42 3/8 3/8 1 5 2-1/4 4 26.79 33.67CCN-1616 11237 M42 1/2 1/2 1-1/4 6 2-3/4 4 35.38 44.30CCN-2020 11239 M42 5/8 5/8 1-1/2 7-1/8 3-1/2 4 53.60 65.18CCN-2424 11241 M7 3/4 3/4 2 8-1/4 4 4 67.81 86.42CCN-3232 11243 M7 1 1 2-1/2 10-1/4 5-1/2 4 110.40 148.41


CN-1212 11221 M42 3/8 3/8 1 5 2-1/4 4 24.36 29.67CN-1616 11223 M42 1/2 1/2 1-1/4 6 2-3/4 4 32.17 40.26CN-2020 11225 M42 5/8 5/8 1-1/2 7-1/8 3-1/2 4 48.73 59.25CN-2424 11227 M7 3/4 3/4 2 8-1/4 4 4 61.66 78.56CN-3232 11229 M7 1 1 2-1/2 10-1/4 5-1/2 4 100.37 134.92CN-4040 11231 M7 1-1/4 1-1/4 3-1/2 12-1/2 6-1/2 6 174.66 226.48CN-6464 11233 M7 2 2 4 15-1/4 8 6 334.56 460.83


CCN-1212-B 11245 M42 3/8 3/8 1 5 2-1/4 4 34.84 40.94CCN-1616-B 11247 M42 1/2 1/2 1-1/4 6 2-3/4 4 46.00 54.49CCN-2020-B 11249 M42 5/8 5/8 1-1/2 7-1/8 3-1/2 4 69.68 81.11CCN-2424-B 11251 M7 3/4 3/4 2 8-1/4 4 4 88.16 105.07CCN-3232-B 11253 M7 1 1 2-1/2 10-1/4 5-1/2 4 143.52 180.26

4 FLUTE, SINGLE END LONG REACH, CENTER CUTTING * For extended reach into deep slots or pockets.* Neck diameter reduced by .020 for clearance.

Tolerance +.0015/-.0000

4 FLUTE, SINGLE END LONG REACH, NON-CENTER CUTTING * For extended reach into deep slots or pockets.* Neck diameter reduced by .020 for clearance.

Tolerance +.0015/-.0000. If mill diameter is greater than 1-1/4”, tolerance is +.002/-.000

4 FLUTE, SINGLE END LONG REACH, BALL END * For extended reach for radius or contouring into deep slots or pockets.* Neck diameter reduced by .020 for clearance.


* For extended reach into deep slots or pockets.* Neck diameter reduced by .020 for clearance.


* For extended reach into deep slots or pockets.* Neck diameter reduced by .020 for clearance.

Tolerance +.0015/-.0000

LONG REACH, BALL END * For extended reach for radius or contouring into deep slots or pockets.* Neck diameter reduced by .020 for clearance.


76


4 FLUTE, DOUBLE END MINIATURE, CENTER CUTTING, NO FLAT* Used for general purpose milling in most materials of medium hardness such as steel, brass, iron, etc.* Tools can be used for profi ling, slotting, keyways, and pockets.



DS-602 11992 M42 1/16 3/16 3/32 2 4 10.71 14.01D-602 11800 M42 1/16 3/16 3/16 2-1/4 4 11.46 14.76D-602-L 11902 M42 1/16 3/16 7/32 2-1/2 4 15.90 19.27DS-602-1/2 11994 M42 5/64 3/16 1/8 2 4 10.71 14.01D-602-1/2 11802 M42 5/64 3/16 15/64 2-1/4 4 11.46 14.76DS-603 11996 M42 3/32 3/16 9/64 2 4 10.71 14.01D-603 11804 M42 3/32 3/16 9/32 2-1/4 4 11.46 14.76D-603-L 11904 M42 3/32 3/16 1/2 2-5/8 4 15.90 19.27DS-603-1/2 11998 M42 7/64 3/16 5/32 2 4 10.71 14.01D-603-1/2 11806 M42 7/64 3/16 21/64 2-1/4 4 11.46 14.76DS-604 12000 M42 1/8 3/16 3/16 2 4 10.71 14.01D-604 11808 M42 1/8 3/16 3/8 2-1/4 4 11.46 14.76D-604-L 11906 M42 1/8 3/16 3/4 3-1/8 4 15.90 19.27DS-604-1/2 12002 M42 9/64 3/16 3/16 2 4 10.71 14.01D-604-1/2 11810 M42 9/64 3/16 27/64 2-1/4 4 11.46 14.76DS-605 12004 M42 5/32 3/16 15/64 2 4 10.71 14.01D-605 11812 M42 5/32 3/16 7/16 2-1/4 4 11.46 14.76D-605-L 11908 M42 5/32 3/16 7/8 3-1/4 4 15.90 19.27DS-605-1/2 12006 M42 11/64 3/16 1/4 2 4 10.91 14.28D-605-1/2 11814 M42 11/64 3/16 33/64 2-1/4 4 11.46 14.76DS-606 12008 M42 3/16 3/16 9/32 2 4 10.71 14.01D-606 11816 M42 3/16 3/16 1/2 2-1/4 4 11.46 14.76D-606-L 11910 M42 3/16 3/16 1 3-3/8 4 15.90 19.27

CO

BA

LT H

SS

EN

D M

ILLS

- G

EN

ER

AL

PU

RP

OS

E

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 77


4 FLUTE, DOUBLE END CENTER CUTTING * Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron etc.* Can be used in profi ling, keyways, pockets and plunge cutting.



DD-1203-1/2 11818 M42 7/64 3/8 3/8 3-1/16 4 16.17 22.01DDS-1204 12010 M42 1/8 3/8 3/16 2-3/4 4 13.41 19.25DD-1204 11820 M42 1/8 3/8 3/8 3-1/16 4 14.98 20.87DD-1204-M 11912 M42 1/8 3/8 1/2 3-1/4 4 16.98 22.82DD-1204-L 11914 M42 1/8 3/8 5/8 3-9/16 4 18.12 25.09DD-1204-1/2 11822 M42 9/64 3/8 7/16 3-1/8 4 16.17 22.01DDS-1205 12012 M42 5/32 3/8 15/64 2-3/4 4 13.41 19.25DD-1205 11824 M42 5/32 3/8 7/16 3-1/8 4 16.01 21.85DD-1205-1/2 11826 M42 11/64 3/8 1/2 3-1/8 4 16.17 22.01DDS-1206 12014 M42 3/16 3/8 9/32 2-3/4 4 13.41 19.25DD-1206 11828 M42 3/16 3/8 1/2 3-1/4 4 14.98 20.87DD-1206-L 11916 M42 3/16 3/8 7/8 4-1/8 4 17.41 24.34DD-1206-1/2 11830 M42 13/64 3/8 9/16 3-1/4 4 16.17 22.01DDS-1207 12016 M42 7/32 3/8 21/64 2-3/4 4 14.06 20.17DD-1207 11832 M42 7/32 3/8 9/16 3-1/4 4 16.01 21.85DD-1207-1/2 11834 M42 15/64 3/8 5/8 3-3/8 4 16.17 23.09DDS-1208 12018 M42 1/4 3/8 3/8 2-3/4 4 14.06 20.17DD-1208 11836 M42 1/4 3/8 5/8 3-3/8 4 15.41 22.33DD-1208-1/2 11838 M42 17/64 3/8 11/16 3-3/8 4 16.17 23.09DD-1209 11840 M42 9/32 3/8 11/16 3-3/8 4 16.01 22.93DD-1209-1/2 11842 M42 19/64 3/8 3/4 3-1/2 4 16.17 23.09DD-1210 11844 M42 5/16 3/8 3/4 3-1/2 4 15.41 22.33DD-1210-1/2 11846 M42 21/64 3/8 3/4 3-1/2 4 16.17 23.09DD-1211 11848 M42 11/32 3/8 3/4 3-1/2 4 16.01 22.93DD-1211-1/2 11850 M42 23/64 3/8 3/4 3-1/2 4 16.17 23.09DD-1212 11852 M42 3/8 3/8 3/4 3-1/2 4 15.41 22.33DD-1612-1/2 11854 M42 25/64 1/2 1 4-1/8 4 24.44 34.88DD-1613 11856 M42 13/32 1/2 1 4-1/8 4 24.44 34.88DD-1613-1/2 11858 M42 27/64 1/2 1 4-1/8 4 24.44 34.88DD-1614 11860 M42 7/16 1/2 1 4-1/8 4 24.44 34.88DD-1614-1/2 11862 M42 29/64 1/2 1 4-1/8 4 24.44 34.88DD-1615 11864 M42 15/32 1/2 1 4-1/8 4 24.44 34.88DD-1615-1/2 11866 M42 31/64 1/2 1 4-1/8 4 24.44 34.88DD-1616 11868 M42 1/2 1/2 1 4-1/8 4 24.39 34.83DD-2017 11870 M42 17/32 5/8 1-3/8 5 4 34.45 45.64DD-2018 11872 M42 9/16 5/8 1-3/8 5 4 31.10 42.29DD-2019 11874 M42 19/32 5/8 1-3/8 5 4 34.77 46.02DD-2020 11876 M42 5/8 5/8 1-3/8 5 4 32.61 44.34DD-2424 11944 M42 3/4 3/4 1-5/8 5-5/8 4 41.52 84.37DD-2828 11946 M42 7/8 7/8 1-7/8 6-1/8 4 56.58 101.22DD-3232 11948 M42 1 1 1-7/8 6-3/8 4 72.07 123.43

CO

BA

LT H

SS

EN

D M

ILLS - G

EN

ER

AL P

UR

PO

SE

78


4 FLUTE, DOUBLE ENDNON-CENTER CUTTING * Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron etc.* Not to be used for plunge cutting.


4 FLUTE, DOUBLE END BALL END * Used for radius or contouring part surfaces. * Design to cut materials ranging from nickel base alloy, stainless, tough alloys and abrasive materials.


3 FLUTE, SINGLE END60 DEGREE HELIX, CENTER CUTTING* Used in stainless steel, titanium, Inconel and high temperature alloy materials. * High helix increases length of cutting edge which reduces cutting load varia-tion and provides excellent surface fi nish.



D-2421 11878 M42 21/32 3/4 1-5/8 5-5/8 4 47.79 92.08D-2422 11880 M42 11/16 3/4 1-5/8 5-5/8 4 47.45 96.50D-2423 11882 M42 23/32 3/4 1-5/8 5-5/8 4 45.86 88.09D-2424 11884 M42 3/4 3/4 1-5/8 5-5/8 4 45.52 94.57D-2825 11886 M42 25/32 7/8 1-7/8 6-1/8 4 58.64 100.54D-2826 11888 M42 13/16 7/8 1-7/8 6-1/8 4 55.83 99.64D-2828 11892 M42 7/8 7/8 1-7/8 6-1/8 4 52.04 95.03D-3230 11896 M42 15/16 1 1-7/8 6-3/8 4 68.02 118.52D-3232 11900 M42 1 1 1-7/8 6-3/8 4 69.95 123.32


DD-1204-B 11950 M42 1/8 3/8 3/8 3-1/8 4 31.20 36.77DD-1205-B 11952 M42 5/32 3/8 7/16 3-1/8 4 31.20 36.77DD-1206-B 11954 M42 3/16 3/8 1/2 3-1/4 4 31.20 36.77DD-1207-B 11956 M42 7/32 3/8 9/16 3-1/4 4 32.12 37.75DD-1208-B 11958 M42 1/4 3/8 5/8 3-3/8 4 32.12 38.77DD-1209-B 11960 M42 9/32 3/8 11/16 3-3/8 4 32.12 38.77DD-1210-B 11962 M42 5/16 3/8 3/4 3-1/2 4 32.12 38.77DD-1211-B 11964 M42 11/32 3/8 3/4 3-1/2 4 32.12 38.77DD-1212-B 11966 M42 3/8 3/8 3/4 3-1/2 4 32.12 38.77DD-1616-B 11968 M42 1/2 1/2 1 4-1/8 4 45.26 55.32DD-2020-B 11970 M42 5/8 5/8 1-3/8 5 4 60.84 71.60DD-2424-B 11972 M42 3/4 3/4 1-5/8 5-5/8 4 81.88 120.49DD-2828-B 11974 M42 7/8 7/8 1-7/8 6-1/8 4 105.40 144.70DD-3232-B 11976 M42 1 1 1-7/8 6-3/8 4 122.95 169.12


E60-1208 15460 M42 1/4 3/8 5/8 2-7/16 3 12.75 16.46E60-1210 15462 M42 5/16 3/8 3/4 2-1/2 3 13.32 17.03E60-1212 15464 M42 3/8 3/8 3/4 2-1/2 3 13.32 17.03E60-1212-L 15466 M42 3/8 3/8 1-1/2 3-1/4 3 17.45 21.21E60-1616 15468 M42 1/2 1/2 1-1/4 3-1/4 3 16.93 22.83E60-1616-L 15470 M42 1/2 1/2 2 4 3 22.36 29.21E60-1616-E 15472 M42 1/2 1/2 3 5 3 28.58 35.43E60-2020 15474 M42 5/8 5/8 1-5/8 3-3/4 3 25.08 32.40E60-2020-L 15476 M42 5/8 5/8 2-1/2 4-5/8 3 33.02 40.18E60-2424 15478 M42 3/4 3/4 1-5/8 3-7/8 3 32.71 46.92E60-2424-L 15480 M42 3/4 3/4 3 5-1/4 3 46.82 61.03E60-2828 11279 M42 7/8 7/8 1-7/8 4-1/8 3 53.92 68.64E60-3232 15486 M42 1 1 2 4-1/2 3 50.84 66.41E60-3232-L 15488 M42 1 1 4 6-1/2 3 75.92 104.13

CO

BA

LT H

SS

EN

D M

ILLS

- G

EN

ER

AL

PU

RP

OS

E

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 79


3 FLUTE, SINGLE ENDCENTER CUTTING * 3 fl utes usually allow feed rates 50% faster than 2 fl ute tools. * Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron etc.

Tolerance +.0015/-.0000


E-1203 12022 M42 3/32 3/8 5/16 2-1/4 3 13.90 17.74E-1204 12024 M42 1/8 3/8 3/8 2-5/16 3 12.55 16.39E-1205 12026 M42 5/32 3/8 7/16 2-5/16 3 13.90 17.74E-1206 12028 M42 3/16 3/8 1/2 2-3/8 3 12.55 16.39E-1206-L 12266 M42 3/16 3/8 3/4 2-5/8 3 16.39 20.28E-1207 12030 M42 7/32 3/8 1/2 2-3/8 3 14.28 18.12E-1207-L 12268 M42 7/32 3/8 1-1/4 3-1/8 3 17.20 21.11E-1208 12032 M42 1/4 3/8 5/8 2-7/16 3 12.87 16.71E-1208-L 12270 M42 1/4 3/8 1-1/4 3-1/16 3 15.14 19.04E-1209 12034 M42 9/32 3/8 11/16 2-1/2 3 14.28 18.12E-1209-L 12272 M42 9/32 3/8 1-3/8 3-1/8 3 16.87 20.71E-1210 12036 M42 5/16 3/8 3/4 2-1/2 3 12.87 16.71E-1210-L 12274 M42 5/16 3/8 1-3/8 3-1/8 3 16.21 20.34E-1211 12038 M42 11/32 3/8 3/4 2-1/2 3 14.28 18.12E-1211-L 12276 M42 11/32 3/8 1-1/2 3-1/4 3 16.87 20.71E-1212 12040 M42 3/8 3/8 3/4 2-1/2 3 12.87 16.71E-1212-L 12278 M42 3/8 3/8 1-1/2 3-1/4 3 15.14 19.04E-1213 12042 M42 13/32 3/8 1 2-11/16 3 18.98 25.04E-1214 12044 M42 7/16 3/8 1 2-11/16 3 16.98 23.04E-1614-L 12280 M42 7/16 1/2 1-3/4 3-3/4 3 23.81 31.37E-1615 12048 M42 15/32 1/2 1-1/4 3-1/4 3 22.38 28.61E-1216 12046 M42 1/2 3/8 1 2-11/16 3 16.98 23.04E-1616 12050 M42 1/2 1/2 1-1/4 3-1/4 3 20.06 26.12E-1616-L 12282 M42 1/2 1/2 2 4 3 22.28 29.31E-1617 12052 M42 17/32 1/2 1-3/8 3-3/8 3 28.07 35.26E-1618 12054 M42 9/16 1/2 1-3/8 3-3/8 3 25.42 32.61E-1619 12056 M42 19/32 1/2 1-3/8 3-3/8 3 28.07 35.58E-1620 12058 M42 5/8 1/2 1-3/8 3-3/8 3 25.42 32.99E-2020 12084 M42 5/8 5/8 1-5/8 3-3/4 3 25.42 32.99E-2020-L 12284 M42 5/8 5/8 2-1/2 4-5/8 3 29.66 37.43E-1621 12060 M42 21/32 1/2 1-5/8 3-5/8 3 32.25 44.60E-1622 12062 M42 11/16 1/2 1-5/8 3-5/8 3 32.12 44.52E-1623 12064 M42 23/32 1/2 1-5/8 3-5/8 3 31.64 46.40E-1624 12066 M42 3/4 1/2 1-5/8 3-5/8 3 28.66 43.37E-2024 12086 M42 3/4 5/8 1-5/8 3-3/4 3 29.22 44.21E-2424 12096 M42 3/4 3/4 1-5/8 3-7/8 3 28.66 43.37E-2424-L 12286 M42 3/4 3/4 3 5-1/4 3 37.68 53.12E-1625 12068 M42 25/32 1/2 1-5/8 3-5/8 3 39.21 53.92E-1626 12070 M42 13/16 1/2 1-5/8 3-5/8 3 36.45 51.16E-2026 12088 M42 13/16 5/8 1-7/8 4 3 36.45 51.16E-2426 12098 M42 13/16 3/4 1-7/8 4-1/8 3 41.40 56.67E-1627 12072 M42 27/32 1/2 1-5/8 3-5/8 3 40.72 56.00E-1628 12074 M42 7/8 1/2 1-5/8 3-5/8 3 37.37 52.13E-2028 12090 M42 7/8 5/8 1-7/8 4 3 40.82 57.13E-2428 12100 M42 7/8 3/4 1-7/8 4-1/8 3 39.21 54.62E-2828 12116 M42 7/8 7/8 1-7/8 4-1/8 3 37.87 52.86E-1630 12078 M42 15/16 1/2 1-7/8 3-7/8 3 46.90 62.18E-2030 12092 M42 15/16 5/8 1-7/8 4 3 46.90 62.18E-1632 12082 M42 1 1/2 1-7/8 3-7/8 3 45.16 61.27E-2432 12104 M42 1 3/4 1-7/8 4-1/8 3 45.58 61.97E-3232 12122 M42 1 1 2 4-1/2 3 46.68 63.41E-3232-M 12292 M42 1 1 3 5-1/2 3 60.75 77.17E-3232-L 12294 M42 1 1 4 6-1/2 3 61.90 91.67E-2434 12106 M42 1-1/16 3/4 2 4-1/4 3 75.69 92.72

CO

BA

LT H

SS

EN

D M

ILLS - G

EN

ER

AL P

UR

PO

SE

80



E-3234 12124 M42 1-1/16 1 2 4-1/2 3 74.25 90.96E-2436 12108 M42 1-1/8 3/4 2 4-1/4 3 67.60 84.31E-3236 12126 M42 1-1/8 1 2 4-1/2 3 65.38 82.41E-2438 12110 M42 1-3/16 3/4 2 4-1/4 3 83.46 100.49E-3238 12128 M42 1-3/16 1 2 4-1/2 3 79.43 96.41E-2440 12112 M42 1-1/4 3/4 2 4-1/4 3 74.25 90.96E-3240 12130 M42 1-1/4 1 2 4-1/2 3 71.72 88.69E-4040 12140 M42 1-1/4 1-1/4 2 4-1/2 3 70.36 87.01E-4040-L 12296 M42 1-1/4 1-1/4 4 6-1/2 3 93.75 123.91E-3242 12132 M7 1-5/16 1 2 4-1/2 3 80.09 133.79E-3244 12134 M7 1-3/8 1 2 4-1/2 3 72.82 126.45E-2448 12114 M7 1-1/2 3/4 2 4-1/4 3 85.17 138.86E-3248 12138 M7 1-1/2 1 2 4-1/2 3 80.48 134.12E-4048 12144 M7 1-1/2 1-1/4 2 4-1/2 3 82.01 136.66E-4056 12146 M7 1-3/4 1-1/4 2 4-1/2 3 99.76 154.41E-4064 12150 M7 2 1-1/4 2 4-1/2 3 121.83 179.18

3 FLUTE, SINGLE ENDCENTER CUTTING - CONTINUED

3 FLUTE, SINGLE ENDBALL END* 3 fl utes usually allow feed rates 50% faster than 2 fl ute tools.* Used for radius or contouring part surfaces. * Designed to cut materials including nickel base alloy, stainless, tough alloys, and abrasive materials.

Tolerance +.0005/-.0005. If mill diameter is greater than 5/8”, tolerance is +.001/-.001. If mill diameter is greater than 1-1/4”, tolerance is +.002/-.001


E-1204-B 12156 M42 1/8 3/8 3/8 2-5/16 3 17.69 21.61E-1206-B 12160 M42 3/16 3/8 1/2 2-3/8 3 18.03 22.02E-1206-LB 12306 M42 3/16 3/8 3/4 2-5/8 3 20.50 24.34E-1208-B 12164 M42 1/4 3/8 5/8 2-1/2 3 18.59 22.64E-1208-LB 12310 M42 1/4 3/8 1-1/4 3-1/16 3 20.50 24.34E-1210-B 12168 M42 5/16 3/8 3/4 2-1/2 3 19.88 23.87E-1210-LB 12314 M42 5/16 3/8 1-3/8 3-1/8 3 22.52 26.51E-1212-B 12172 M42 3/8 3/8 3/4 2-1/2 3 20.01 23.98E-1212-LB 12318 M42 3/8 3/8 1-1/2 3-1/4 3 20.89 24.81E-1614-LB 12320 M42 7/16 1/2 1-3/4 3-3/4 3 33.76 41.62E-1616-B 12182 M42 1/2 1/2 1-1/4 3-1/4 3 30.04 36.49E-1616-LB 12322 M42 1/2 1/2 2 4 3 31.92 39.41E-1617-B 12184 M42 17/32 1/2 1-3/8 3-3/8 3 39.41 46.80E-1618-B 12186 M42 9/16 1/2 1-3/8 3-3/8 3 36.00 43.44E-2020-B 12216 M42 5/8 5/8 1-5/8 3-3/4 3 41.90 49.82E-1622-B 12194 M42 11/16 1/2 1-5/8 3-5/8 3 46.47 58.76E-1624-B 12198 M42 3/4 1/2 1-5/8 3-5/8 3 48.56 63.56E-2424-LB 12326 M42 3/4 3/4 3 5-1/4 3 62.57 78.66E-2026-B 12220 M42 13/16 5/8 1-7/8 4 3 58.25 73.52E-2428-B 12230 M42 7/8 3/4 1-7/8 4-1/8 3 68.36 85.60E-2432-B 12232 M42 1 3/4 1-7/8 4-1/8 3 73.52 90.32

CO

BA

LT H

SS

EN

D M

ILLS

- G

EN

ER

AL

PU

RP

OS

E

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 81


3 FLUTE, SINGLE ENDLONG REACH, CENTER CUTTING* 3 fl utes usually allow feed rates 50% faster than 2 fl ute tools. * For use when longer reach is required but not a longer cutting length, such as deep slots or pockets. Extended unfl uted neck for greater rigidity. * Materials include nickel base alloy, stainless, alloys and abrasive materials

Tolerance +.0015/-.0000.

LONG REACH, CENTER CUTTING* 3 fl utes usually allow feed rates 50% faster than 2 fl ute tools. * For use when longer reach is required but not a longer cutting length, such as deep slots or pockets. Extended unfl uted neck for greater rigidity. * Materials include nickel base alloy, stainless, alloys and abrasive materials

3 FLUTE, DOUBLE ENDCENTER CUTTING* 3 fl utes usually allow feed rates 50% faster than 2 fl ute tools. * For general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron etc.



FS-603 12564 M42 3/32 3/16 5/32 2 3 13.14 16.44F-603 12428 M42 3/32 3/16 5/16 2-1/4 3 15.82 19.18FS-604 12566 M42 1/8 3/16 3/16 2 3 13.40 16.76F-604 12430 M42 1/8 3/16 3/8 2-1/4 3 15.82 19.18F-606 12434 M42 3/16 3/16 1/2 2-1/4 3 15.82 19.18F-1202-1/2 12436 M42 5/64 3/8 5/16 3-1/16 3 20.06 25.85F-1203 12438 M42 3/32 3/8 5/16 3-1/16 3 20.06 25.85F-1203-1/2 12440 M42 7/64 3/8 3/8 3-1/16 3 20.06 25.85F-1204 12442 M42 1/8 3/8 3/8 3-1/16 3 17.74 23.63F-1204-1/2 12444 M42 9/64 3/8 7/16 3-1/8 3 20.06 25.85F-1205 12446 M42 5/32 3/8 7/16 3-1/8 3 20.06 25.85F-1205-1/2 12448 M42 11/64 3/8 1/2 3-1/8 3 20.06 25.85F-1206 12450 M42 3/16 3/8 1/2 3-1/4 3 17.74 23.63F-1206-1/2 12452 M42 13/64 3/8 9/16 3-1/4 3 20.06 25.85F-1207 12454 M42 7/32 3/8 9/16 3-1/4 3 20.06 25.85F-1207-1/2 12456 M42 15/64 3/8 5/8 3-3/8 3 20.06 26.99F-1208 12458 M42 1/4 3/8 5/8 3-3/8 3 18.28 25.25F-1208-1/2 12460 M42 17/64 3/8 11/16 3-3/8 3 20.60 27.58F-1209 12462 M42 9/32 3/8 11/16 3-3/8 3 20.60 27.58F-1209-1/2 12464 M42 19/64 3/8 3/4 3-1/2 3 21.00 28.11F-1210 12466 M42 5/16 3/8 3/4 3-1/2 3 18.28 25.25F-1210-1/2 12468 M42 21/64 3/8 3/4 3-1/2 3 21.00 28.11F-1211 12470 M42 11/32 3/8 3/4 3-1/2 3 20.60 27.58F-1211-1/2 12472 M42 23/64 3/8 3/4 3-1/2 3 21.00 28.11F-1212 12474 M42 3/8 3/8 3/4 3-1/2 3 18.28 25.25F-1612-1/2 12476 M42 25/64 1/2 1 4-1/8 3 32.36 42.94F-1613 12478 M42 13/32 1/2 1 4-1/8 3 31.74 42.13F-1613-1/2 12480 M42 27/64 1/2 1 4-1/8 3 32.36 42.94F-1614 12482 M42 7/16 1/2 1 4-1/8 3 28.61 39.04F-1614-1/2 12484 M42 29/64 1/2 1 4-1/8 3 32.36 42.94F-1615 12486 M42 15/32 1/2 1 4-1/8 3 31.74 42.13F-1616 12490 M42 1/2 1/2 1 4-1/8 3 28.61 39.04F-2017 12492 M42 17/32 5/8 1-3/8 5 3 47.74 59.20F-2018 12494 M42 9/16 5/8 1-3/8 5 3 42.67 54.47F-2019 12496 M42 19/32 5/8 1-3/8 5 3 45.16 56.35F-2020 12498 M42 5/8 5/8 1-3/8 5 3 40.88 52.13F-2422 12502 M42 11/16 3/4 1-5/8 5-5/8 3 57.00 97.23F-2424 12506 M42 3/4 3/4 1-5/8 5-5/8 3 52.19 92.96F-2826 12510 M42 13/16 7/8 1-3/4 6-1/8 3 77.96 119.75F-2828 12514 M42 7/8 7/8 1-7/8 6-1/8 3 70.27 112.06F-3232 12522 M42 1 1 1-7/8 6-3/8 3 84.01 131.25

CO

BA

LT H

SS

EN

D M

ILLS - G

EN

ER

AL P

UR

PO

SE

REACH LIST COATEDTOOL NAME EDP MAT. MILL SHANK LOC LENGTH OAL FLUTES PRICE PRICEEN-1204 12362 M42 1/8 3/8 3/8 13/16 2-9/16 3 13.76 17.81EN-1206 12366 M42 3/16 3/8 1/2 1-1/8 2-7/8 3 13.25 17.14EN-1208 12370 M42 1/4 3/8 5/8 1-1/2 3-1/16 3 13.89 17.81EN-1210 12372 M42 5/16 3/8 3/4 1-3/4 3-5/16 3 15.05 19.18EN-1212 12374 M42 3/8 3/8 3/4 1-3/4 3-5/16 3 15.05 19.18EN-1616 12378 M42 1/2 1/2 1 2-1/4 4-1/16 3 22.66 29.82

82


3 FLUTE, DOUBLE ENDBALL END * 3 fl utes usually allow feed rates 50% faster than 2 fl ute tools.* Used for radius or contouring part surfaces. * Designed to cut materials including nickel base alloy, stainless, tough alloys, and abrasive materials. * Can be used in profi ling, slotting, keyways and pockets.

Tolerance +.0005/-.0005. If shank and mill diameters are the same, tolerance is +.0000/-.0025. If mill diameter is greater than 5/8”, tolerance is +.001/-.001

2 FLUTE, DOUBLE ENDCENTER CUTTINGLEFT HAND SPIRAL, LEFT HAND CUT* Used for general purpose milling in most materials of medium and tough alloy materials, such as stainless steel, nickel base alloy, brass, iron etc. * Can be used in profi ling, slotting, keyways and pockets.



F-1203-B 12524 M42 3/32 3/8 5/16 3-1/16 3 26.13 32.08F-1204-B 12526 M42 1/8 3/8 3/8 3-1/16 3 23.92 29.82F-1206-B 12530 M42 3/16 3/8 1/2 3-1/4 3 23.92 29.82F-1208-B 12534 M42 1/4 3/8 5/8 3-3/8 3 24.59 31.64F-1210-B 12538 M42 5/16 3/8 3/4 3-1/2 3 26.29 33.81F-1212-B 12542 M42 3/8 3/8 3/4 3-1/2 3 25.80 33.18F-1616-B 12546 M42 1/2 1/2 1 4-1/8 3 42.18 53.02


XB-1206 12750 M42 3/16 3/8 7/16 3-1/8 2 24.34 30.23XB-1208 12752 M42 1/4 3/8 1/2 3-1/8 2 24.34 31.31XB-1210 12754 M42 5/16 3/8 9/16 3-1/8 2 25.52 32.58XB-1212 12756 M42 3/8 3/8 9/16 3-1/8 2 25.04 31.96XB-1614 12758 M42 7/16 1/2 13/16 3-3/4 2 34.38 45.16XB-1616 12760 M42 1/2 1/2 13/16 3-3/4 2 33.10 43.48XB-2020 12764 M42 5/8 5/8 1-1/8 5 2 41.37 52.62XB-2424 12768 M42 3/4 3/4 1-5/16 5 2 59.65 99.88


XD-1206 12772 M42 3/16 3/8 1/2 3-1/4 4 24.34 30.23XD-1208 12774 M42 1/4 3/8 5/8 3-3/8 4 24.34 31.31XD-1210 12776 M42 5/16 3/8 3/4 3-1/2 4 25.52 32.58XD-1212 12778 M42 3/8 3/8 3/4 3-1/2 4 25.04 31.96XD-1614 12780 M42 7/16 1/2 1 4-1/8 4 34.38 45.16XD-1616 12782 M42 1/2 1/2 1 4-1/8 4 33.10 43.48XD-2020 12786 M42 5/8 5/8 1-3/8 5 4 41.37 52.62XD-2424 12790 M42 3/4 3/4 1-5/8 5-5/8 4 60.50 101.38

4 FLUTE, DOUBLE ENDCENTER CUTTINGLEFT HAND SPIRAL, LEFT HAND CUT* Used for general purpose milling in most materials of medium and tough alloy materials, such as stainless steel, nickel base alloy, brass, iron etc. * Can be used in profi ling, slotting, keyways and pockets.


CO

BA

LT H

SS

EN

D M

ILLS

- S

PE

CIA

L U

SE

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 83


3 FLUTE, SINGLE ENDCORNER ROUNDING * Designed to produce a radius between a horizontal and vertical surface. * Tools are formed-relieved which allows the form and size to be maintained after resharpening.


CO

BA

LT H

SS

EN

D M

ILLS - S

PE

CIA

L US

E

MINOR LARGE LIST COATEDTOOL NAME EDP MAT. RADIUS DIA. DIA. SHANK OAL FLUTES PRICE PRICE

R-1201 12694 M42 1/32 5/16 3/8 3/8 2-1/2 3 36.45 40.29R-1601 12700 M42 1/32 7/16 1/2 1/2 2-5/8 3 36.45 42.56R-1202 12696 M42 1/16 5/16 7/16 3/8 2-1/2 3 30.28 36.40R-1602 12702 M42 1/16 3/8 1/2 1/2 2-5/8 3 36.45 42.56R-1203 12698 M42 3/32 5/16 1/2 3/8 2-1/2 3 32.50 38.61R-1603 12704 M42 3/32 5/16 1/2 1/2 2-5/8 3 36.45 42.56R-1604 12706 M42 1/8 3/8 5/8 1/2 2-7/8 3 42.56 49.21R-1605 12708 M42 5/32 5/16 5/8 1/2 2-7/8 3 46.40 53.05R-1606 12710 M42 3/16 3/8 3/4 1/2 3 3 52.08 62.30R-2406 12732 M42 3/16 3/8 3/4 3/4 3-1/8 3 52.08 62.30R-1607 12712 M42 7/32 7/16 7/8 1/2 3 3 65.54 75.76R-1608 12714 M42 1/4 3/8 7/8 1/2 3 3 58.41 68.63R-2408 12734 M42 1/4 3/8 7/8 3/4 3-1/4 3 58.41 68.63R-1609 12716 M42 9/32 7/16 1 1/2 3 3 56.89 67.60R-1610 12718 M42 5/16 3/8 1 1/2 3 3 59.22 69.98R-2410 12736 M42 5/16 3/8 1 3/4 3-1/4 3 68.36 79.06R-1611 12720 M42 11/32 7/16 1-1/8 1/2 3-1/4 3 87.55 99.67R-1612 12722 M42 3/8 3/8 1-1/8 1/2 3-1/4 3 77.12 89.28R-2412 12738 M42 3/8 3/8 1-1/8 3/4 3-1/2 3 81.82 98.53R-1613 12724 M42 13/32 7/16 1-1/4 1/2 3-1/2 3 97.07 113.67R-1614 12726 M42 7/16 3/8 1-1/4 1/2 3-1/2 3 85.50 102.21R-1615 12728 M7 15/32 7/16 1-3/8 1/2 3-1/2 3 103.63 157.32R-1616 12730 M7 1/2 3/8 1-3/8 1/2 3-1/2 3 90.47 143.04R-2416 12740 M7 1/2 3/8 1-3/8 3/4 3-3/4 3 90.47 143.04R-2418 12742 M7 9/16 3/8 1-1/2 3/4 3-3/4 3 105.40 158.07R-2420 12744 M7 5/8 3/8 1-5/8 3/4 3-3/4 3 132.98 185.65R-2424 12746 M7 3/4 3/8 1-7/8 3/4 3-3/4 3 161.43 214.10R-2432 12748 M7 1 3/4 2-3/4 3/4 4-1/2 3 247.40 345.19

84


MINOR LARGE LIST COATEDTOOL NAME EDP MAT. RADIUS DIA. DIA. SHANK OAL FLUTES PRICE PRICE

RC-1201 13060 M42 1/32 3/8 7/16 3/8 2-1/2 4 36.45 42.56RC-1202 13062 M42 1/16 5/16 7/16 3/8 2-1/2 4 30.28 36.40RC-1203 13064 M42 3/32 5/16 1/2 3/8 2-1/2 4 32.50 38.61RC-1604 13066 M42 1/8 3/8 5/8 1/2 3 4 42.56 49.21RC-1605 13068 M42 5/32 7/16 3/4 1/2 3 4 46.40 56.62RC-1606 13070 M42 3/16 1/2 7/8 1/2 2-15/16 4 52.08 62.30RC-2406 13078 M42 3/16 1/2 7/8 3/4 3-1/8 4 52.08 62.30RC-1608 13072 M42 1/4 1/2 1 1/2 3 4 58.41 69.11RC-2408 13080 M42 1/4 1/2 1 3/4 3-1/4 4 58.41 69.11RC-1610 13074 M42 5/16 1/2 1-1/8 1/2 3-1/2 4 59.22 71.33RC-2810 13092 M42 5/16 1/2 1-1/8 7/8 3-1/2 4 69.68 81.97RC-1612 13076 M42 3/8 1/2 1-1/4 1/2 3-3/4 4 77.12 93.83RC-2812 13094 M42 3/8 1/2 1-1/4 7/8 3-3/4 4 81.82 98.53RC-2414 13082 M7 7/16 1/2 1-3/8 3/4 3-3/4 4 85.50 138.12RC-3214 13096 M7 7/16 1/2 1-3/8 1 4 4 87.15 140.79RC-2416 13084 M7 1/2 1/2 1-1/2 3/4 3-7/8 4 90.47 143.04RC-3216 13098 M7 1/2 1/2 1-1/2 1 4-1/8 4 90.47 143.04RC-2420 13086 M7 5/8 11/16 1-15/16 3/4 4 4 132.98 185.65RC-3220 13100 M7 5/8 11/16 1-15/16 1 4-1/4 4 135.55 189.24RC-2424 13088 M7 3/4 3/4 2-1/4 3/4 4-1/8 4 161.43 214.10RC-3224 13102 M7 3/4 3/4 2-1/4 1 4-5/16 4 164.54 218.24RC-2432 13090 M7 1 3/4 2-3/4 3/4 4-1/2 4 242.71 338.64RC-3232 13104 M7 1 3/4 2-3/4 1 4-3/4 4 247.40 345.19

4 FLUTE, SINGLE ENDCORNER ROUNDING * Designed to produce a radius between a horizontal and vertical surface. * Tools are formed-relieved which allows the form and size to be main-tained after resharpening.


CO

BA

LT H

SS

EN

D M

ILLS

- S

PE

CIA

L U

SE

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 85


2 FLUTE, SINGLE ENDCORNER RADIUS, CENTER CUTTING* Corner radius allows more strength and minimizes chatter and chip-ping on corner especially when milling pockets.* Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron etc.

Tolerance +.0015/-.0000

LIST COATEDTOOL NAME EDP RADIUS MILL SHANK LOC OAL FLUTES PRICE PRICE

A-1204-R015 15146 .015 1/8 3/8 3/8 2-5/16 2 13.90 17.74A-1206-R020 15148 .020 3/16 3/8 7/16 2-5/16 2 13.90 17.74A-1206-R030 15150 .030 3/16 3/8 7/16 2-5/16 2 13.90 17.74A-1208-R020 15152 .020 1/4 3/8 1/2 2-5/16 2 14.39 18.22A-1208-R030 15154 .030 1/4 3/8 1/2 2-5/16 2 14.39 18.22A-1208-R045 15156 .045 1/4 3/8 1/2 2-5/16 2 14.44 18.28A-1210-R020 15158 .020 5/16 3/8 9/16 2-5/16 2 15.79 19.63A-1210-R030 15160 .030 5/16 3/8 9/16 2-5/16 2 15.90 19.74A-1210-R045 15162 .045 5/16 3/8 9/16 2-5/16 2 16.06 19.90A-1212-R020 15164 .020 3/8 3/8 9/16 2-5/16 2 15.79 19.63A-1212-R030 15166 .030 3/8 3/8 9/16 2-5/16 2 15.90 19.74A-1212-R045 15168 .045 3/8 3/8 9/16 2-5/16 2 16.06 19.90A-1616-R020 15170 .020 1/2 1/2 1 3 2 21.96 28.07A-1616-R030 15172 .030 1/2 1/2 1 3 2 22.12 28.23A-1616-R045 15174 .045 1/2 1/2 1 3 2 22.33 28.45A-1616-R060 15176 .060 1/2 1/2 1 3 2 22.61 28.72A-2020-R020 15178 .020 5/8 5/8 1-5/16 3-7/16 2 29.69 37.26A-2020-R030 15180 .030 5/8 5/8 1-5/16 3-7/16 2 29.85 37.42A-2020-R045 15182 .045 5/8 5/8 1-5/16 3-7/16 2 30.12 37.75A-2020-R060 15184 .060 5/8 5/8 1-5/16 3-7/16 2 30.50 38.13A-2020-R090 15186 .090 5/8 5/8 1-5/16 3-7/16 2 31.26 38.83A-2424-R020 15188 .020 3/4 3/4 1-5/16 3-9/16 2 36.94 53.11A-2424-R030 15190 .030 3/4 3/4 1-5/16 3-9/16 2 37.21 53.32A-2424-R045 15192 .045 3/4 3/4 1-5/16 3-9/16 2 37.42 53.59A-2424-R060 15194 .060 3/4 3/4 1-5/16 3-9/16 2 37.80 53.92A-2424-R090 15196 .090 3/4 3/4 1-5/16 3-9/16 2 38.50 54.62A-2424-R125 15198 .125 3/4 3/4 1-5/16 3-9/16 2 39.21 55.38A-3232-R020 15200 .020 1 1 1-5/8 4-1/8 2 55.43 71.55A-3232-R030 15202 .030 1 1 1-5/8 4-1/8 2 55.59 71.71A-3232-R045 15204 .045 1 1 1-5/8 4-1/8 2 55.86 71.98A-3232-R060 15206 .060 1 1 1-5/8 4-1/8 2 56.24 72.41A-3232-R090 15208 .090 1 1 1-5/8 4-1/8 2 57.00 73.11A-3232-R125 15210 .125 1 1 1-5/8 4-1/8 2 57.92 74.03

CO

BA

LT H

SS

EN

D M

ILLS - S

PE

CIA

L US

E

86


4 FLUTE, SINGLE ENDCORNER RADIUS, CENTER CUTTING* Corner radius allows more strength and minimizes chatter and chip-ping on corner especially when milling pockets.* Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron etc.

Tolerance +.0015/-.0000

LIST COATEDTOOL NAME EDP RADIUS MILL SHANK LOC OAL FLUTES PRICE PRICE

CC-1204-R015 15212 .015 1/8 3/8 3/8 2-5/16 4 16.87 20.71CC-1206-R020 15214 .020 3/16 3/8 1/2 2-3/8 4 16.87 20.71CC-1206-R030 15216 .030 3/16 3/8 1/2 2-3/8 4 16.87 20.71CC-1208-R020 15218 .020 1/4 3/8 5/8 2-7/16 4 18.06 21.96CC-1208-R030 15220 .030 1/4 3/8 5/8 2-7/16 4 18.06 21.96CC-1208-R045 15222 .045 1/4 3/8 5/8 2-7/16 4 18.06 21.96CC-1210-R020 15224 .020 5/16 3/8 3/4 2-1/2 4 19.04 22.88CC-1210-R030 15226 .030 5/16 3/8 3/4 2-1/2 4 19.04 22.88CC-1210-R045 15228 .045 5/16 3/8 3/4 2-1/2 4 19.04 22.88CC-1212-R020 15230 .020 3/8 3/8 3/4 2-1/2 4 19.04 22.88CC-1212-R030 15232 .030 3/8 3/8 3/4 2-1/2 4 19.04 22.88CC-1212-R045 15234 .045 3/8 3/8 3/4 2-1/2 4 19.04 22.88CC-1616-R020 15236 .020 1/2 1/2 1-1/4 3-1/4 4 25.53 31.58CC-1616-R030 15238 .030 1/2 1/2 1-1/4 3-1/4 4 25.53 31.58CC-1616-R045 15240 .045 1/2 1/2 1-1/4 3-1/4 4 25.53 31.58CC-1616-R060 15242 .060 1/2 1/2 1-1/4 3-1/4 4 25.53 31.58CC-2020-R020 15244 .020 5/8 5/8 1-5/8 3-3/4 4 34.39 41.97CC-2020-R030 15246 .030 5/8 5/8 1-5/8 3-3/4 4 34.39 41.97CC-2020-R045 15248 .045 5/8 5/8 1-5/8 3-3/4 4 34.39 41.97CC-2020-R060 15250 .060 5/8 5/8 1-5/8 3-3/4 4 34.39 41.97CC-2020-R090 15252 .090 5/8 5/8 1-5/8 3-3/4 4 34.39 41.97CC-2424-R020 15254 .020 3/4 3/4 1-5/8 3-7/8 4 42.99 59.11CC-2424-R030 15256 .030 3/4 3/4 1-5/8 3-7/8 4 42.99 59.11CC-2424-R045 15258 .045 3/4 3/4 1-5/8 3-7/8 4 42.99 59.11CC-2424-R060 15260 .060 3/4 3/4 1-5/8 3-7/8 4 42.99 59.11CC-2424-R090 15262 .090 3/4 3/4 1-5/8 3-7/8 4 42.99 59.11CC-2424-R125 15264 .125 3/4 3/4 1-5/8 3-7/8 4 42.99 59.11CC-3232-R020 15266 .020 1 1 2 4-1/2 4 69.92 86.04CC-3232-R030 15268 .030 1 1 2 4-1/2 4 69.92 86.04CC-3232-R045 15270 .045 1 1 2 4-1/2 4 69.92 86.04CC-3232-R060 15272 .060 1 1 2 4-1/2 4 69.92 86.04CC-3232-R090 15274 .090 1 1 2 4-1/2 4 69.92 86.04CC-3232-R125 15276 .125 1 1 2 4-1/2 4 69.92 86.04

CO

BA

LT H

SS

EN

D M

ILLS

- S

PE

CIA

L U

SE

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 87


2 FLUTE, SINGLE END DRILL POINT END MILLS* Can be used for drilling, slotting, chamfering, and profi le milling.* Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron etc* All of these tools are made with cobalt HSS (M42) material.* Available in 60, 82, 90, 100, and 120 degree points.

Tolerance +.0015/-.0000DP-1 tools are used for “V” groove milling. The point is approximately .005 diameter.

DRILLING SPOTTING COUNTERSINK CHAMFERING SIDE MILLING

ANGLE LIST COATEDTOOL NAME EDP DEGREE MILL SHANK LOC OAL FLUTES PRICE PRICEA-1204-DP60 16335 60 1/8 3/8 3/8 2-5/16 2 13.21 17.05A-1206-DP60 16337 60 3/16 3/8 7/16 2-5/16 2 13.21 17.05A-1208-DP60 16037 60 1/4 3/8 5/8 2-7/16 2 14.42 18.31

* A-1208-DP60-1 16324 60 1/4 3/8 5/8 2-7/16 2 14.42 18.31A-1210-DP60 16038 60 5/16 3/8 23/32 2-15/32 2 14.42 18.31A-1212-DP60 16039 60 3/8 3/8 3/4 2-1/2 2 14.42 18.31

* A-1212-DP60-1 16327 60 3/8 3/8 3/4 2-1/2 2 14.42 18.31A-1616-DP60 16041 60 1/2 1/2 1-1/4 3-1/4 2 20.54 24.43

* A-1616-DP60-1 16329 60 1/2 1/2 1-1/4 3-1/4 2 20.54 24.43A-2020-DP60 16042 60 5/8 5/8 1-5/8 3-3/4 2 30.13 37.70A-2424-DP60 16044 60 3/4 3/4 1-11/16 3-15/16 2 36.59 52.50

* A-2424-DP60-1 16331 60 3/4 3/4 1-11/16 3-15/16 2 34.14 48.84A-2428-DP60 16045 60 7/8 3/4 1-15/16 4-3/16 2 46.47 61.88A-2432-DP60 16047 60 1 3/4 2 4-1/4 2 51.78 68.71

* A-2432-DP60-1 16333 60 1 3/4 2 4-1/4 2 51.78 68.71

ANGLE LIST COATEDTOOL NAME EDP DEGREE MILL SHANK LOC OAL FLUTES PRICE PRICE

A-1204-DP82 16440 82 1/8 3/8 3/8 2-5/16 2 13.21 17.05A-1206-DP82 16441 82 3/16 3/8 7/16 2-5/16 2 13.21 17.05A-1208-DP82 16442 82 1/4 3/8 5/8 2-7/16 2 11.31 15.19A-1210-DP82 16443 82 5/16 3/8 23/32 2-15/32 2 11.31 15.19A-1212-DP82 16444 82 3/8 3/8 3/4 2-1/2 2 11.31 15.19A-1214-DP82 16445 82 7/16 3/8 1-1/32 2-23/32 2 17.14 23.77A-1616-DP82 16446 82 1/2 1/2 1-1/4 3-1/4 2 16.11 22.23A-1618-DP82 16447 82 9/16 1/2 1-13/32 3-13/32 2 21.63 29.04A-2020-DP82 16448 82 5/8 5/8 1-5/8 3-3/4 2 23.63 31.20

60 DEGREE

82 DEGREE

CO

BA

LT H

SS

EN

D M

ILLS - S

PE

CIA

L US

E

*Tool names with “-1” have a .005” sharp point for groove milling.

88


DRILL POINT END MILLS2 FLUTE, SINGLE END - CONTINUED

ANGLE LIST COATEDTOOL NAME EDP DEGREE MILL SHANK LOC OAL FLUTES PRICE PRICEA-1204-DP 16334 90 1/8 3/8 3/8 2-5/16 2 13.21 17.05

* A-1204-DP-1 16710 90 1/8 3/8 3/8 2-5/16 2 13.21 17.05A-1206-DP 16336 90 3/16 3/8 7/16 2-5/16 2 13.21 17.05

* A-1206-DP-1 16452 90 3/16 3/8 7/16 2-5/16 2 13.21 17.05A-1208-DP 15434 90 1/4 3/8 5/8 2-7/16 2 11.30 15.20

* A-1208-DP-1 16323 90 1/4 3/8 5/8 2-7/16 2 11.31 15.19A-1210-DP 15436 90 5/16 3/8 23/32 2-15/32 2 11.30 15.20

* A-1210-DP-1 16325 90 5/16 3/8 23/32 2-15/32 2 11.31 15.19A-1212-DP 15438 90 3/8 3/8 3/4 2-1/2 2 11.30 15.20

* A-1212-DP-1 16326 90 3/8 3/8 3/4 2-1/2 2 11.31 15.19A-1214-DP 15440 90 7/16 3/8 1-1/32 2-23/32 2 17.14 23.25

* A-1214-DP-1 16449 90 7/16 3/8 1-1/32 2-23/32 2 17.14 23.25A-1616-DP 15442 90 1/2 1/2 1-1/4 3-1/4 2 16.12 22.23

* A-1616-DP-1 16328 90 1/2 1/2 1-1/4 3-1/4 2 16.11 22.23A-1618-DP 15444 90 9/16 1/2 1-13/32 3-13/32 2 21.63 29.04

* A-1618-DP-1 16450 90 9/16 1/2 1-13/32 3-13/32 2 21.63 29.04A-2020-DP 15446 90 5/8 5/8 1-5/8 3-3/4 2 23.63 31.20

* A-2020-DP-1 16451 90 5/8 5/8 1-5/8 3-3/4 2 23.63 31.20A-2022-DP 15448 90 11/16 5/8 1-21/32 3-25/32 2 27.43 40.29A-2424-DP 15450 90 3/4 3/4 1-11/16 3-15/16 2 27.16 42.10

* A-2424-DP-1 16330 90 3/4 3/4 1-11/16 3-15/16 2 28.69 44.59A-2426-DP 15452 90 13/16 3/4 1-29/32 4-5/32 2 35.58 50.89A-2428-DP 15454 90 7/8 3/4 1-15/16 4-3/16 2 36.45 51.86A-2430-DP 15456 90 15/16 3/4 1-31/32 4-7/32 2 41.59 57.05A-2432-DP 15458 90 1 3/4 2 4-1/4 2 40.61 57.54

* A-2432-DP-1 16332 90 1 3/4 2 4-1/4 2 41.97 59.55

90 DEGREE

ANGLE LIST COATEDTOOL NAME EDP DEGREE MILL SHANK LOC OAL FLUTES PRICE PRICE

A-1208-DP100 16596 100 1/4 3/8 5/8 2-7/16 2 14.42 18.31A-1212-DP100 16597 100 3/8 3/8 3/4 2-1/2 2 14.42 18.31

100 DEGREE

120 DEGREEANGLE LIST COATED

TOOL NAME EDP DEGREE MILL SHANK LOC OAL FLUTES PRICE PRICEA-1616-DP120 16040 120 1/2 1/2 1-1/4 3-1/4 2 18.53 24.64A-2424-DP120 16043 120 3/4 3/4 1-11/16 3-15/16 2 30.79 45.49A-2432-DP120 16046 120 1 3/4 2 4-1/4 2 46.70 63.63

CO

BA

LT H

SS

EN

D M

ILLS

- S

PE

CIA

L U

SE

*Tool names with “-1” have a .005” sharp point for groove milling.

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 89


ANGLE MILLSSINGLE AND DOUBLE END* Designed to mill chamfers and to countersink.* Cobalt HSS (M42) gives high edge hardness at high temperature levels.

ENDS & LISTTOOL NAME EDP ANGLES MAT. MILL SHANK OAL FLUTES PRICE

AM-3/8-60/90 19242 DE 60/90 M42 3/8 3/8 2-3/4 2 27.73AM-3/8-82/90 19241 DE 82/90 M42 3/8 3/8 2-3/4 2 27.73AM-3/8-90/90 19240 DE 90/90 M42 3/8 3/8 2-3/4 2 27.73AM-1/2-60/90 19247 DE 60/90 M42 1/2 1/2 3-3/8 2 31.41AM-1/2-82/90 19246 DE 82/90 M42 1/2 1/2 3-3/16 2 31.41AM-1/2-90/90 19245 DE 90/90 M42 1/2 1/2 3-3/16 2 31.41AM-3/4-60/90 19252 DE 60/90 M42 3/4 3/4 3-3/8 2 43.89AM-3/4-82/90 19251 DE 82/90 M42 3/4 3/4 3-3/16 2 43.79AM-3/4-90 19243 SE 90 M42 3/4 3/8 2-3/8 2 32.06AM-3/4-90/90 19250 DE 90/90 M42 3/4 3/4 3-3/16 2 43.79AM-1-90 19248 SE 90 M42 1 1/2 2-15/16 2 40.84AM-1-1/4-90 19253 SE 90 M42 1-1/4 3/4 3-3/8 2 51.27

NC SPOTTING DRILL* NC tolerance for precision spotting.* Included point angles of 82°, 90°, or 120°.* Cobalt HSS (M42) material for longer tool life.

CO

BA

LT H

SS

EN

D M

ILLS A

ND

DR

ILLS - S

PE

CIA

L US

E

DRILL DRILL SHANK FLUTE LIST COATEDTOOL NAME EDP POINT DIA. DIA. LENGTH OAL PRICE PRICE

HSNC-4M-82 10847 82 4mm 4mm 12mm 52mm 10.55 13.08HSNC-4M-90 10849 90 4mm 4mm 12mm 52mm 10.55 13.08HSNC-4M-120 10851 120 4mm 4mm 12mm 52mm 10.55 13.08HSNC-1/4-82 10853 82 1/4 1/4 7/8 2-5/8 11.20 16.27HSNC-1/4-90 10855 90 1/4 1/4 7/8 2-5/8 11.20 16.27HSNC-1/4-120 10857 120 1/4 1/4 7/8 2-5/8 11.20 16.27HSNC-8M-82 10859 82 8mm 8mm 25mm 79mm 11.50 19.10HSNC-8M-90 10861 90 8mm 8mm 25mm 79mm 11.50 19.10HSNC-8M-120 10863 120 8mm 8mm 25mm 79mm 11.50 19.10HSNC-3/8-82 10865 82 3/8 3/8 1 3-1/2 11.20 22.39HSNC-3/8-90 10867 90 3/8 3/8 1 3-1/2 11.20 22.39HSNC-3/8-120 10869 120 3/8 3/8 1 3-1/2 11.20 22.39HSNC-1/2-82 10871 82 1/2 1/2 1-3/8 4 15.55 29.69HSNC-1/2-90 10873 90 1/2 1/2 1-3/8 4 15.55 29.69HSNC-1/2-120 10875 120 1/2 1/2 1-3/8 4 15.55 29.69HSNC-5/8-82 10877 82 5/8 5/8 1-3/8 4-1/2 21.55 38.99HSNC-5/8-90 10879 90 5/8 5/8 1-3/8 4-1/2 21.55 38.99HSNC-5/8-120 10881 120 5/8 5/8 1-3/8 4-1/2 21.55 38.99HSNC-3/4-82 10883 82 3/4 3/4 1-1/2 5-3/16 26.30 45.31HSNC-3/4-90 10885 90 3/4 3/4 1-1/2 5-3/16 26.30 45.31HSNC-3/4-120 10887 120 3/4 3/4 1-1/2 5-3/16 26.30 45.31

NC SPOTTING DRILL* NC tolerance for precision spotting.* Included point angles of 82°, 90°, or 120°.* Cobalt HSS (M42) material for longer tool life.

90


COARSE PITCH ROUGHERMULTIPLE FLUTE, NON-CENTER CUTTING* Due to the sinusoidal form on cutting edge, small chips are produced which allow faster feed rates then conventional end mills. * A rough fi nish is produced which will require a fi nishing pass. * Used in diffi cult and abrasive materials and tough alloy materials, such as stainless steel, nickel base alloy, brass, iron etc.


MULTIPLE FLUTE, NON-CENTER CUTTING* Due to the sinusoidal form on cutting edge, small chips are produced which allow faster feed rates then conventional end mills. * A rough fi nish is produced which will require a fi nishing pass. * Used in diffi cult and abrasive materials and tough alloy materials, such as stainless steel, nickel base alloy, brass, iron etc.


CRP-1206 15572 M42 3/16 3/8 1/2 2-3/8 4 17.50 21.21CRP-1208 12572 M42 1/4 3/8 5/8 2-7/16 4 17.87 21.58CRP-1208-L 15574 M42 1/4 3/8 1-1/8 2-15/16 4 19.38 23.15CRP-1208-LL 15766 M42 1/4 3/8 1-1/4 3-1/16 4 19.86 23.62CRP-1210 12574 M42 5/16 3/8 3/4 2-1/2 4 18.81 22.57CRP-1210-L 15576 M42 5/16 3/8 1-3/8 3-1/8 4 23.20 26.91CRP-1212 12576 M42 3/8 3/8 3/4 2-1/2 4 21.37 25.08CRP-1212-L 15578 M42 3/8 3/8 1-1/2 3-1/4 4 22.31 26.07CRP-1214 12578 M42 7/16 3/8 1 2-11/16 4 22.31 28.22CRPS-1616 15580 M42 1/2 1/2 1 3 4 21.95 27.80CRP-1616 12580 M42 1/2 1/2 1-1/4 3-1/4 4 23.51 29.36CRP-1616-M 15582 M42 1/2 1/2 1-5/8 3-5/8 4 25.71 32.55CRP-1616-L 12620 M42 1/2 1/2 2 4 4 32.76 39.61CRP-1618 15584 M42 9/16 1/2 1-3/8 3-3/8 4 25.71 32.76CRPS-2020 15586 M42 5/8 5/8 3/4 2-7/8 4 23.83 31.19CRP-2020 12582 M42 5/8 5/8 1-5/8 3-3/4 4 29.10 36.47CRP-2020-L 12622 M42 5/8 5/8 2-1/2 4-5/8 4 38.93 46.29CRP-2022 15588 M42 11/16 5/8 1-5/8 3-3/4 4 35.69 47.34CRPS-2424 12588 M42 3/4 3/4 3/4 3 4 32.76 42.69CRP-2024 12584 M42 3/4 5/8 1-5/8 3-7/8 4 34.38 48.64CRP-2424 12586 M42 3/4 3/4 1-5/8 3-7/8 4 35.48 49.74CRP-2424-M 15590 M42 3/4 3/4 2-1/2 4-3/4 4 38.40 52.62CRP-2424-L 12624 M42 3/4 3/4 3 5-1/4 4 45.09 59.30CRP-2426 15592 M42 13/16 3/4 1-7/8 4-1/8 4 39.03 53.30CRP-2428 12590 M42 7/8 3/4 1-7/8 4-1/8 5 39.50 53.77CRP-2828 12606 M42 7/8 7/8 1-7/8 4-1/8 5 38.72 52.93CRP-2428-L 12626 M42 7/8 3/4 3-1/2 5-3/4 5 49.38 72.37CRP-2828-L 12628 M42 7/8 7/8 3-1/2 5-3/4 5 49.38 72.37CRPS-2432 12594 M42 1 3/4 3/4 3 5 45.61 57.06CRP-2432 12592 M42 1 3/4 1-1/2 3-3/4 5 51.52 67.09CRPS-3232 15598 M42 1 1 1-5/8 4-1/8 5 46.50 62.13CRP-2432-M 15594 M42 1 3/4 2 4-1/4 5 47.60 63.22CRP-3232 12608 M42 1 1 2 4-1/2 5 50.68 66.31CRP-3232-M 12630 M42 1 1 3 5-1/2 5 57.06 72.68CRP-3232-L 12632 M42 1 1 4 6-1/2 5 61.92 90.18CRP-3232-E 12634 M42 1 1 6 8-1/2 5 86.67 115.73CRP-3236 12610 M42 1-1/8 1 2 4-1/2 6 57.13 73.87CRPS-2440 12598 M42 1-1/4 3/4 3/4 3 6 61.39 74.09CRP-2440 12596 M42 1-1/4 3/4 1-1/2 3-3/4 6 69.39 85.48CRP-2440-M 15596 M42 1-1/4 3/4 2 4-1/2 6 67.20 83.59CRP-4040 12612 M42 1-1/4 1-1/4 2 4-1/2 6 66.25 82.35CRP-4040-M 12636 M42 1-1/4 1-1/4 3 5-1/2 6 88.20 105.77CRP-4040-L 12638 M42 1-1/4 1-1/4 4 6-1/2 6 92.43 120.38CRP-4040-E 12640 M42 1-1/4 1-1/4 6 8-1/2 6 124.56 152.52CRPS-2448 12602 M42 1-1/2 3/4 3/4 3 6 78.90 131.93CRP-2448 12600 M42 1-1/2 3/4 1-1/2 3-3/4 6 94.62 147.66CRP-4048 12614 M42 1-1/2 1-1/4 2 4-1/2 6 90.18 143.22CRP-4048-M 12642 M42 1-1/2 1-1/4 3 5-1/2 6 107.06 160.09CRP-4048-L 12644 M42 1-1/2 1-1/4 4 6-1/2 6 117.79 191.99CRP-4048-E 12646 M42 1-1/2 1-1/4 5 7-1/2 6 142.59 216.05CRP-4048-EE 12648 M42 1-1/2 1-1/4 8 10-1/2 6 199.54 278.65CRP-4056 12616 M42 1-3/4 1-1/4 2-1/2 5-1/4 6 125.18 181.41CRP-4056-L 12650 M42 1-3/4 1-1/4 4-1/2 7-1/4 6 158.32 231.83CRPS-2464 12604 M42 2 3/4 3/4 3 8 123.41 176.45CRP-4064 12618 M42 2 1-1/4 2 4-1/2 8 154.45 207.48CRP-6464-M 15882 M42 2 2 4 7-3/4 8 206.28 279.75CRP-6464-L 12658 M42 2 2 6 9-3/4 8 288.63 367.74

CO

BA

LT H

SS

EN

D M

ILLS

- R

OU

GH

ER

S

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 91


CO

BA

LT H

SS

EN

D M

ILLS - R

OU

GH

ER

S

COARSE PITCH ROUGHERMULTIPLE FLUTE, CENTER CUTTING* Due to the sinusoidal form on cutting edge, small chips are produced which allow faster feed rates then conventional end mills. * These tools will plunge cut. * A rough fi nish is produced which will require a fi nishing pass. * Used in diffi cult and abrasive materials and tough alloy materials, such as stainless steel, nickel base alloy, brass, iron etc.



CCRP-1206 15600 M42 3/16 3/8 1/2 2-3/8 4 17.50 21.21CCRP-1208 15602 M42 1/4 3/8 5/8 2-7/16 4 17.87 21.58CCRP-1208-L 15604 M42 1/4 3/8 1-1/8 2-15/16 4 19.38 23.15CCRP-1210 15606 M42 5/16 3/8 3/4 2-1/2 4 18.81 22.57CCRP-1210-L 15608 M42 5/16 3/8 1-3/8 3-1/8 4 23.20 26.91CCRP-1212 15610 M42 3/8 3/8 3/4 2-1/2 4 21.37 25.08CCRP-1212-L 15612 M42 3/8 3/8 1-1/2 3-1/4 4 22.31 26.07CCRP-1214 15614 M42 7/16 3/8 1 2-11/16 4 22.31 28.22CCRP-1616-2 15796 M42 1/2 1/2 5/8 2-5/8 4 21.95 27.85CCRPS-1616 15616 M42 1/2 1/2 1 3 4 21.95 27.80CCRP-1616 12664 M42 1/2 1/2 1-1/4 3-1/4 4 23.51 29.36CCRP-1616-M 15618 M42 1/2 1/2 1-5/8 3-5/8 4 25.71 32.55CCRP-1616-L 12678 M42 1/2 1/2 2 4 4 32.76 39.61CCRP-2020 12666 M42 5/8 5/8 1-5/8 3-3/4 4 29.10 36.47CCRP-2020-L 12680 M42 5/8 5/8 2-1/2 4-5/8 4 38.93 46.29CCRP-2024 15620 M42 3/4 5/8 1-5/8 3-3/4 4 34.38 48.64CCRP-2424 12668 M42 3/4 3/4 1-5/8 3-7/8 4 35.48 49.74CCRP-2424-M 15622 M42 3/4 3/4 2-1/4 4-5/8 4 38.40 52.62CCRP-2424-L 12682 M42 3/4 3/4 3 5-1/4 4 45.09 59.30CCRP-2432-M 15624 M42 1 3/4 2 4-1/4 5 47.60 63.22CCRP-3232 12670 M42 1 1 2 4-1/2 5 50.68 66.31CCRP-3232-M 15626 M42 1 1 3 5-1/2 5 57.06 72.68CCRP-3232-L 12684 M42 1 1 4 6-1/2 5 63.40 92.43CCRP-4040 12672 M42 1-1/4 1-1/4 2 4-1/2 6 66.25 82.35CCRP-4040-L 12686 M42 1-1/4 1-1/4 4 6-1/2 6 92.43 120.38CCRP-4048 12674 M42 1-1/2 1-1/4 2 4-1/2 6 90.18 143.22CCRP-4048-L 12688 M42 1-1/2 1-1/4 4 6-1/2 6 125.05 204.35

92


COARSE PITCH ROUGHER WITH HIGH HELIXFOR ALUMINUM (35° HELIX)3 FLUTE, CENTER CUTTING* Due to the sinusoidal form on cutting edge, small chips are produced which allow faster feed rates then conventional end mills. * A rough fi nish is produced which will require a fi nishing pass. * Designed to machine soft materials such as aluminum, plastic, zinc alloys. * Wide fl utes provide rapid chip evacuation while high helix provides positive shearing action.



ERP-1206 15628 M42 3/16 3/8 1/2 2-3/8 3 17.50 21.21ERP-1208 15630 M42 1/4 3/8 5/8 2-7/16 3 17.87 21.58ERP-1208-L 15632 M42 1/4 3/8 1-1/8 2-15/16 3 19.38 23.15ERP-1210 15634 M42 5/16 3/8 3/4 2-1/2 3 18.81 22.57ERP-1210-L 15636 M42 5/16 3/8 1-3/8 3-1/8 3 23.20 26.91ERP-1212 15638 M42 3/8 3/8 3/4 2-1/2 3 21.37 25.08ERP-1212-L 15640 M42 3/8 3/8 1-1/2 3-1/4 3 22.31 26.07ERP-1214 15642 M42 7/16 3/8 1 2-11/16 3 22.31 28.22ERPS-1616-2 15780 M42 1/2 1/2 1/2 2-9/16 3 21.42 27.22ERPS-1616 15646 M42 1/2 1/2 1 3 3 21.95 27.80ERP-1616 15644 M42 1/2 1/2 1-1/4 3-1/4 3 23.51 29.36ERP-1616-M 15648 M42 1/2 1/2 1-5/8 3-5/8 3 25.71 32.55ERP-1616-L 15650 M42 1/2 1/2 2 4 3 32.76 39.61ERPS-2020 15654 M42 5/8 5/8 3/4 2-7/8 3 23.83 31.19ERP-2020 15652 M42 5/8 5/8 1-5/8 3-3/4 3 29.10 36.47ERP-2020-L 15656 M42 5/8 5/8 2-1/2 4-5/8 3 38.93 46.29ERPS-2424 15660 M42 3/4 3/4 3/4 3 3 32.76 42.69ERP-2424 15658 M42 3/4 3/4 1-5/8 3-7/8 3 35.48 49.74ERP-2424-2 15798 M42 3/4 3/4 2 4-1/4 3 36.94 51.31ERP-2424-M 15662 M42 3/4 3/4 2-1/2 4-3/4 3 38.96 53.41ERP-2424-L 15664 M42 3/4 3/4 3 5-1/4 3 45.09 59.30ERPS-2432 15782 M42 1 3/4 1-1/8 3-3/8 3 45.61 61.97ERP-2432 15778 M42 1 3/4 1-1/2 3-3/4 3 51.52 67.09ERP-3232 15666 M42 1 1 2 4-1/2 3 54.32 71.28ERP-3232-M 15668 M42 1 1 3 5-1/2 3 57.06 72.68

CO

BA

LT H

SS

EN

D M

ILLS

- R

OU

GH

ER

S

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 93


CO

BA

LT H

SS

EN

D M

ILLS - R

OU

GH

ER

SFINE PITCH ROUGHERMULTIPLE FLUTE, NON-CENTER CUTTING* Due to the fi ner sinusoidal form on cutting edge, fi ner chips are produced than coarse pitch, which are easier fl ushed away and reduce re-cutting and packing. * A rough fi nish is produced which may require a fi nishing pass. * These will not plunge cut.



CFP-1206 15524 M42 3/16 3/8 1/2 2-3/8 4 17.50 21.21CFP-1208 15526 M42 1/4 3/8 5/8 2-7/16 4 17.87 21.58CFP-1210 15528 M42 5/16 3/8 3/4 2-1/2 4 18.81 22.57CFP-1210-L 15678 M42 5/16 3/8 1-3/8 3-1/8 4 23.20 26.91CFP-1212 15530 M42 3/8 3/8 3/4 2-1/2 4 21.37 25.08CFP-1214 15532 M42 7/16 3/8 1 2-11/16 4 22.31 28.22CFPS-1616-2 15776 M42 1/2 1/2 5/8 2-5/8 4 21.42 27.33CFPS-1616 15536 M42 1/2 1/2 1 3 4 21.95 27.80CFP-1616 15534 M42 1/2 1/2 1-1/4 3-1/4 4 23.51 29.36CFP-1616-M 15538 M42 1/2 1/2 1-5/8 3-5/8 4 25.71 32.55CFP-1616-L 15680 M42 1/2 1/2 2 4 4 32.76 39.61CFP-1616-LL 15682 M42 1/2 1/2 2-1/2 4-1/2 4 34.17 41.02CFP-1616-E 15684 M42 1/2 1/2 3 5 4 36.58 43.42CFP-1618 15540 M42 9/16 1/2 1-3/8 3-3/8 4 25.71 32.76CFPS-2020 15544 M42 5/8 5/8 3/4 2-7/8 4 23.83 31.19CFP-2020-2 15686 M42 5/8 5/8 1-1/4 3-3/4 4 25.08 32.24CFP-2020 15542 M42 5/8 5/8 1-5/8 3-3/4 4 29.10 36.47CFP-2020-M 15688 M42 5/8 5/8 2-1/8 4-1/4 4 30.31 37.93CFP-2020-L 15690 M42 5/8 5/8 2-1/2 4-5/8 4 38.93 46.29CFP-2020-E 15692 M42 5/8 5/8 3-1/8 5-1/4 4 41.17 52.25CFP-2022 15694 M42 11/16 5/8 1-5/8 3-3/4 4 35.69 47.34CFPS-2424 15548 M42 3/4 3/4 3/4 3 4 32.76 42.69CFP-2424-2 15698 M42 3/4 3/4 1-1/4 3-1/2 4 33.44 47.81CFP-2024 15696 M42 3/4 5/8 1-5/8 3-7/8 4 34.38 48.64CFP-2424 15546 M42 3/4 3/4 1-5/8 3-7/8 4 35.48 49.74CFP-2424-M 15550 M42 3/4 3/4 2-1/2 4-3/4 4 38.40 52.62CFP-2424-L 15552 M42 3/4 3/4 3 5-1/4 4 45.09 59.30CFP-2424-E 15700 M42 3/4 3/4 4-1/8 6-3/8 4 48.75 65.36CFP-2426 15702 M42 13/16 3/4 1-7/8 4-1/8 5 39.03 53.30CFPS-2428 15706 M42 7/8 3/4 1-1/8 3-3/8 5 37.83 53.19CFP-2428 15704 M42 7/8 3/4 1-7/8 4-1/8 5 39.50 53.77CFP-2828 15738 M42 7/8 7/8 1-7/8 4-1/8 5 38.72 52.93CFP-2428-L 15708 M42 7/8 3/4 3-1/2 5-3/4 5 49.85 73.09CFP-2828-L 15740 M42 7/8 7/8 3-1/2 5-3/4 5 49.38 72.37CFPS-2432 15554 M42 1 3/4 1-1/8 3-3/8 5 45.61 61.97CFPS-3232-2 15742 M42 1 1 1-1/8 3-5/8 5 45.61 61.97CFP-2432 15794 M42 1 3/4 1-1/2 3-3/4 5 51.52 67.09CFPS-3232 15560 M42 1 1 1-5/8 4-1/8 5 46.50 62.13CFP-2432-M 15556 M42 1 3/4 2 4-1/4 5 47.60 63.22CFP-3232 15558 M42 1 1 2 4-1/2 5 50.68 66.31CFP-3232-M 15562 M42 1 1 3 5-1/2 5 57.06 72.68CFP-2432-L 15710 M42 1 3/4 4 6-1/4 5 61.92 91.12CFP-3232-L 15744 M42 1 1 4 6-1/2 5 61.92 90.18CFP-3232-E 15746 M42 1 1 6 8-1/2 5 84.65 112.91CFPS-2436 15714 M42 1-1/8 3/4 1-1/8 3-3/8 6 45.98 62.33CFP-2436 15712 M42 1-1/8 3/4 2 4-1/4 6 52.04 68.40CFP-3236 15748 M42 1-1/8 1 2 4-1/2 6 55.28 71.37CFP-3236-L 15750 M42 1-1/8 1 3-1/2 6 6 96.87 113.49CFPS-2440 15716 M42 1-1/4 3/4 1-1/8 3-3/8 6 51.73 68.66CFP-2440-M 15718 M42 1-1/4 3/4 2 4-1/2 6 66.25 82.35CFP-4040 15564 M42 1-1/4 1-1/4 2 4-1/2 6 66.25 82.35CFP-4040-M 15566 M42 1-1/4 1-1/4 3 5-1/2 6 82.29 98.39

94


FINE PITCH ROUGHERMULTIPLE FLUTE, NON-CENTER CUTTING - CONTINUED


CFP-4040-L 15568 M42 1-1/4 1-1/4 4 6-1/2 6 92.43 120.38CFP-4040-E 15570 M42 1-1/4 1-1/4 6 8-1/2 6 124.56 152.52CFPS-2444 15722 M42 1-3/8 3/4 1-1/8 3-3/8 6 65.05 118.09CFP-2444 15720 M42 1-3/8 3/4 2 4-1/4 6 71.58 124.20CFPS-2448 15728 M42 1-1/2 3/4 1-1/8 3-3/8 6 84.12 136.74CFP-2448 15724 M42 1-1/2 3/4 1-1/2 3-3/4 6 94.62 147.66CFP-2448-2 15726 M42 1-1/2 3/4 2 4-1/4 6 97.71 150.32CFP-4048 15752 M42 1-1/2 1-1/4 2 4-1/2 6 90.18 143.22CFP-4048-M 15754 M42 1-1/2 1-1/4 3 5-1/2 6 107.06 160.09CFP-4048-L 15756 M42 1-1/2 1-1/4 4 6-1/2 6 116.67 190.09CFP-4048-E 15758 M42 1-1/2 1-1/4 6 8-1/2 6 170.54 241.97CFPS-2456 15732 M42 1-3/4 3/4 1-1/8 3-3/8 6 125.92 178.54CFP-2456 15730 M42 1-3/4 3/4 2 4-1/4 6 135.85 188.47CFPS-2464 15736 M42 2 3/4 1-1/8 3-3/8 8 134.28 183.76CFP-2464 15734 M42 2 3/4 2 4-1/2 8 154.45 207.07CFP-4064 15760 M42 2 1-1/4 2 4-1/2 8 154.45 207.48CFP-6464-M 15764 M42 2 2 4 7-3/4 8 206.28 279.75

FINE PITCH ROUGHERMULTIPLE FLUTE, CENTER CUTTING* Due to the fi ner sinusoidal form on cutting edge, fi ner chips are produced than coarse pitch, which are easier fl ushed away and reduce re-cutting and packing. * A rough fi nish is produced which may require a fi nishing pass. * These tools will plunge cut.



CCFP-1206 17672 M42 3/16 3/8 1/2 2-3/8 4 17.50 21.21CCFP-1208 17673 M42 1/4 3/8 5/8 2-7/16 4 17.87 21.58CCFP-1208-L 17674 M42 1/4 3/8 1-1/8 2-15/16 4 19.38 23.15CCFP-1210 17675 M42 5/16 3/8 3/4 2-1/2 4 18.81 22.57CCFP-1210-L 17676 M42 5/16 3/8 1-3/8 3-1/8 4 23.20 26.91CCFPS-1212 16453 M42 3/8 3/8 3/8 2-1/8 4 26.02 29.73CCFP-1212 17677 M42 3/8 3/8 3/4 2-1/2 4 21.37 25.08CCFP-1212-L 17678 M42 3/8 3/8 1-1/2 3-1/4 4 22.31 26.07CCFP-1214 17679 M42 7/16 3/8 1 2-11/16 4 22.31 28.22CCFP-1616-2 17680 M42 1/2 1/2 5/8 2-5/8 4 21.95 27.85CCFPS-1616 16454 M42 1/2 1/2 1/2 2-1/2 4 21.95 27.85CCFP-1616 17681 M42 1/2 1/2 1-1/4 3-1/4 4 23.51 29.36CCFP-1616-M 17682 M42 1/2 1/2 1-5/8 3-5/8 4 25.71 32.55CCFP-1616-L 16031 M42 1/2 1/2 2 4 4 32.76 39.61CCFPS-2020 16455 M42 5/8 5/8 5/8 2-3/4 4 36.73 44.10CCFP-2020 17683 M42 5/8 5/8 1-5/8 3-3/4 4 29.10 36.47CCFP-2020-L 16032 M42 5/8 5/8 2-1/2 4-5/8 4 38.93 46.29CCFP-2024 17684 M42 3/4 5/8 1-5/8 3-3/4 4 34.38 48.64CCFPS-2424 16456 M42 3/4 3/4 3/4 3 4 48.49 62.75CCFP-2424 17685 M42 3/4 3/4 1-5/8 3-7/8 4 35.48 49.74CCFP-2424-M 17686 M42 3/4 3/4 2-1/4 4-5/8 4 38.40 52.62CCFP-2424-L 16033 M42 3/4 3./4 3 5-1/4 4 45.09 59.30CCFP-2432-M 17687 M42 1 3/4 2 4-1/4 5 47.60 63.22CCFP-3232 17688 M42 1 1 2 4-1/2 5 51.90 67.97CCFP-3232-M 17689 M42 1 1 3 5-1/2 5 57.06 72.68CCFP-3232-L 16034 M42 1 1 4 6-1/2 5 61.92 90.18CCFP-4040 12672 M42 1-1/4 1-1/4 2 4-1/2 6 66.25 82.35

CO

BA

LT H

SS

EN

D M

ILLS

- R

OU

GH

ER

S

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 95


CO

BA

LT H

SS

EN

D M

ILLS - R

OU

GH

ER

SFINE PITCH ROUGHER, BALL ENDMULTIPLE FLUTE, CENTER CUTTING* Used for radius or contouring part surfaces. * Due to the fi ner sinusoidal form on cutting edge, fi ner chips are produced than coarse pitch, which are easier fl ushed away and reduce re-cutting and packing. * A rough fi nish is produced which may require a fi nishing pass. * These will not plunge cut.


MULTIPLE FLUTE, CENTER CUTTING* Used for radius or contouring part surfaces. * Due to the fi ner sinusoidal form on cutting edge, fi ner chips are produced than coarse pitch, which are easier fl ushed away and reduce re-cutting and packing. * A rough fi nish is produced which may require a fi nishing pass.

FINE PITCH ROUGHER WITH HIGH HELIX FOR ALUMINUM (35° HELIX)3 FLUTE, CENTER CUTTING* Due to the fi ner sinusoidal form on cutting edge, fi ner chips are produced than coarse pitch, which are easier fl ushed away and reduce re-cutting and packing. * A rough fi nish is produced which will require a fi nishing pass. * Designed to machine soft materials such as aluminum, plastic, zinc alloys.* Wide fl utes provide rapid chip evacuation while high helix provides positive shearing action.



CCFP-1208-B 15840 M42 1/4 3/8 5/8 2-7/16 4 27.22 30.98CCFP-1212-B 15842 M42 3/8 3/8 3/4 2-1/2 4 30.72 34.49CCFP-1616-B 15844 M42 1/2 1/2 1-1/4 3-1/4 4 38.19 44.10CCFP-2020-B 15846 M42 5/8 5/8 1-5/8 3-3/4 4 45.46 52.82CCFP-2424-B 15848 M42 3/4 3/4 1-5/8 3-7/8 4 61.45 75.66CCFP-3232-B 15850 M42 1 1 2 4-1/2 5 89.03 104.66


EFPS-1208 15784 M42 1/4 3/8 1/4 2-1/8 3 17.87 21.63EFP-1208 15786 M42 1/4 3/8 5/8 2-1/2 3 17.87 21.63EFPS-1212 15788 M42 3/8 3/8 3/8 2-1/8 3 20.90 24.66EFP-1212 15884 M42 3/8 3/8 3/4 2-1/2 3 21.37 25.08EFPS-1616-2 15790 M42 1/2 1/2 1/2 2-9/16 3 21.42 27.22EFP-1616 15886 M42 1/2 1/2 1-1/4 3-1/4 3 23.51 29.36EFP-1616-L 16458 M42 1/2 1/2 2 4 3 32.76 39.61EFP-2020 15888 M42 5/8 5/8 1-5/8 3-3/4 3 29.10 36.42EFPS-2424 15792 M42 3/4 3/4 3/4 3 3 32.76 43.11EFP-2424 15890 M42 3/4 3/4 1-5/8 3-7/8 3 35.48 49.69EFP-2424-L 16460 M42 3/4 3/4 3 5-1/4 3 45.09 59.30EFP-3232 15892 M42 1 1 2 4-1/2 3 50.68 66.25

96


ROUGHER FINISHERMULTIPLE FLUTE, NON-CENTER CUTTING* These end mills are capable of removing material at high roughing speeds while producing fi nishes close to conventional end mills, due to the chip-breaker form. * The 8% cobalt gives high edge hardness at high temperature levels.* Used in diffi cult and abrasive materials and tough alloy materials, such as stainless steel, nickel base alloy, brass, iron etc.



CRFP-1206 15498 M42 3/16 3/8 1/2 2-3/8 4 17.50 21.21CRFP-1208 15500 M42 1/4 3/8 5/8 2-7/16 4 17.87 21.58CRFP-1210 15502 M42 5/16 3/8 3/4 2-1/2 4 18.81 22.57CRFP-1212 15504 M42 3/8 3/8 3/4 2-1/2 4 21.37 25.08CRFP-1214 15506 M42 7/16 3/8 1 2-11/16 4 22.31 28.22CRFPS-1616 15510 M42 1/2 1/2 1 3 4 21.95 27.80CRFP-1616 15508 M42 1/2 1/2 1-1/4 3-1/4 4 23.51 29.36CRFP-1616-M 15512 M42 1/2 1/2 1-5/8 3-5/8 4 25.71 32.55CRFP-2020-2 11255 M42 5/8 5/8 1-1/4 3-3/4 4 25.08 32.24CRFP-2020 15674 M42 5/8 5/8 1-5/8 3-3/4 4 29.10 36.47CRFP-2424-2 11257 M42 3/4 3/4 1-1/4 3-1/2 4 33.44 47.81CRFPS-2424 11259 M42 3/4 3/4 3/4 3 4 32.76 42.69CRFP-2424 15514 M42 3/4 3/4 1-5/8 3-7/8 4 35.48 49.74CRFP-2424-M 15516 M42 3/4 3/4 2-1/2 4-3/4 4 38.40 52.62CRFP-2424-L 15518 M42 3/4 3/4 3 5-1/4 4 45.09 59.30CRFP-2432-M 11261 M42 1 3/4 2 4-1/4 5 47.60 63.22CRFP-3232 15520 M42 1 1 2 4-1/2 5 50.68 66.31CRFP-3232-M 15522 M42 1 1 3 5-1/2 5 57.06 72.68CRFP-3232-L 11263 M42 1 1 4 6-1/2 5 61.92 90.18CRFP-4040-E 11265 M42 1-1/4 1-1/4 6 8-1/2 6 124.56 152.52

FINE PITCH ROUGHER FINISHER WITH HIGH HELIX FOR ALUMINUM (35° HELIX)3 FLUTE, CENTER CUTTING* These end mills are capable of removing material at high roughing speeds while producing fi nishes close to conventional end mills, due to the chip-breaker form. * The 8% cobalt gives high edge hardness at high temperature levels. * These end mills are designed to machine soft materials such as aluminum, plastic, zinc alloys. * Wide fl utes provide rapid chip evacuation while high helix provides positive shearing action.


3 FLUTE, CENTER CUTTING* These end mills are capable of removing material at high roughing speeds while producing fi nishes close to conventional end mills, due to the chip-breaker form. * The 8% cobalt gives high edge hardness at high temperature levels. * These end mills are designed to machine soft materials such as aluminum,


ERFP-1206 17691 M42 3/16 3/8 1/2 2-3/8 3 19.33 23.04ERFP-1208 17692 M42 1/4 3/8 5/8 2-7/16 3 19.33 23.04ERFP-1212 17693 M42 3/8 3/8 3/4 2-1/2 3 23.09 26.80ERFP-1616 17694 M42 1/2 1/2 1-1/4 3-1/4 3 25.39 31.25ERFP-2020 16711 M42 5/8 5/8 1-5/8 3-3/4 3 31.45 38.82ERFP-2424 17695 M42 3/4 3/4 1-5/8 3-7/8 3 38.35 52.62ERFP-3232 17696 M42 1 1 2 4-1/2 3 54.76 70.38

CO

BA

LT H

SS

EN

D M

ILLS

- R

OU

GH

ER

S

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 97


METRIC / INCH END MILLS2 FLUTE, SINGLE END, CENTER CUTTING* These end mills have metric diameters, however, the overall length, length of cut, and shank are all inch dimensions. * Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron etc.* Can be used in profi ling, slotting, keyways and pockets.

Tolerance +.0015/-.0000. If the mill diameter is greater than 32mm, tolerance is +.002/-.000


AP-12M3 10812 M42 3mm 3/8 3/8 2-5/16 2 14.11 17.95AP-12M3.5 11813 M42 3.5mm 3/8 7/16 2-5/16 2 14.11 17.95AP-12M4 10814 M42 4mm 3/8 7/16 2-5/16 2 14.11 17.95AP-12M4.5 10815 M42 4.5mm 3/8 7/16 2-5/16 2 14.11 17.95AP-12M5 10816 M42 5mm 3/8 1/2 2-5/16 2 14.11 17.95AP-12M5.5 10817 M42 5.5mm 3/8 1/2 2-3/8 2 14.49 18.33AP-12M6 10818 M42 6mm 3/8 1/2 2-5/16 2 14.49 18.33AP-12M6.5 10819 M42 6.5mm 3/8 9/16 2-3/8 2 14.49 18.33AP-12M7 10820 M42 7mm 3/8 9/16 2-3/8 2 14.49 18.33AP-12M7.5 10821 M42 7.5mm 3/8 9/16 2-5/16 2 14.49 18.33AP-12M8 10822 M42 8mm 3/8 9/16 2-5/16 2 14.49 18.33AP-12M8.5 10823 M42 8.5mm 3/8 9/16 2-5/16 2 14.49 18.33AP-12M9 10824 M42 9mm 3/8 9/16 2-5/16 2 14.49 18.33AP-12M9.5 10825 M42 9.5mm 3/8 9/16 2-5/16 2 18.22 21.37AP-12M10 10826 M42 10mm 3/8 13/16 2-1/2 2 18.22 24.34AP-12M10.5 10827 M42 10.5mm 3/8 13/16 2-1/2 2 19.36 25.47AP-12M11 10828 M42 11mm 3/8 13/16 2-1/2 2 19.36 25.47AP-12M11.5 10829 M42 11.5mm 3/8 13/16 2-1/2 2 20.55 26.61AP-12M12 10830 M42 12mm 3/8 13/16 2-1/2 2 20.55 26.61AP-16M12.5 10831 M42 12.5mm 1/2 1 3 2 21.96 27.85AP-16M13 10832 M42 13mm 1/2 1-1/8 3-1/8 2 21.96 27.85AP-16M13.5 10833 M42 13.5mm 1/2 1-1/8 3-1/8 2 23.90 30.23AP-16M14 10834 M42 14mm 1/2 1-1/8 3-1/8 2 23.90 30.23AP-16M14.5 10835 M42 14.5mm 1/2 1-1/8 3-1/8 2 25.15 31.45AP-16M15 10836 M42 15mm 1/2 1-1/8 3-1/8 2 25.15 31.80AP-20M16 10838 M42 16mm 5/8 1-5/16 3-7/16 2 29.09 36.72AP-20M17 10840 M42 17mm 5/8 1-5/16 3-7/16 2 31.53 44.18AP-20M18 10842 M42 18mm 5/8 1-5/16 3-7/16 2 34.43 47.63AP-24M19 10844 M42 19mm 3/4 1-5/8 3-7/8 2 36.55 52.31AP-24M20 10846 M42 20mm 3/4 1-1/2 3-3/4 2 39.59 55.05AP-24M21 10848 M42 21mm 3/4 1-1/2 3-3/4 2 43.10 58.57AP-24M22 10850 M42 22mm 3/4 1-1/2 3-3/4 2 45.16 59.87AP-28M23 10852 M42 23mm 7/8 1-7/8 4-1/8 2 53.19 68.19AP-32M24 10854 M42 24mm 1 2 4-1/2 2 56.12 72.65AP-32M25 10856 M42 25mm 1 2 4-1/2 2 58.30 74.47AP-32M28 10858 M42 28mm 1 2 4-1/2 2 63.60 80.25AP-32M32 10860 M42 32mm 1 2 4-1/2 2 77.45 131.08AP-32M35 10862 M42 35mm 1 2 4-1/2 2 91.56 146.21AP-32M36 10864 M42 36mm 1 2 4-1/2 2 91.56 146.21AP-40M40 10866 M42 40mm 1-1/4 2 4-1/2 2 106.55 162.78AP-40M45 10868 M42 45mm 1-1/4 2 4-1/2 2 129.74 189.23AP-40M50 10870 M42 50mm 1-1/4 2 4-1/2 2 140.93 195.64

CO

BA

LT H

SS

EN

D M

ILLS -M

ET

RIC

98


METRIC / INCH END MILLS4 FLUTE, SINGLE END, CENTER CUTTING* These end mills have metric diameters, however, the overall length, length of cut, and shank are all inch dimensions. * Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron etc.* Can be used in profi ling, slotting, keyways and pockets.

Tolerance +.0015/-.0000. If the mill diameter is greater than 32mm, tolerance is +.002/-.000


CCP-12M3 11740 M42 3mm 3/8 3/8 2-5/16 4 14.11 17.95CCP-12M3.5 11741 M42 3.5mm 3/8 7/16 2-5/16 4 14.11 17.95CCP-12M4 11742 M42 4mm 3/8 7/16 2-5/16 4 14.11 17.95CCP-12M4.5 11743 M42 4.5mm 3/8 7/16 2-5/16 4 14.11 17.95CCP-12M5 11744 M42 5mm 3/8 9/16 2-1/2 4 14.11 17.95CCP-12M5.5 11745 M42 5.5mm 3/8 5/8 2-1/2 4 14.49 18.33CCP-12M6 11746 M42 6mm 3/8 5/8 2-1/2 4 14.49 18.33CCP-12M6.5 11747 M42 6.5mm 3/8 11/16 2-1/2 4 14.49 18.33CCP-12M7 11748 M42 7mm 3/8 11/16 2-1/2 4 14.49 18.33CCP-12M7.5 11749 M42 7.5mm 3/8 3/4 2-1/2 4 14.49 18.33CCP-12M8 11750 M42 8mm 3/8 3/4 2-1/2 4 14.49 18.33CCP-12M8.5 11751 M42 8.5mm 3/8 3/4 2-1/2 4 14.49 18.33CCP-12M9 11752 M42 9mm 3/8 3/4 2-1/2 4 14.49 18.33CCP-12M9.5 11753 M42 9.5mm 3/8 3/4 2-1/2 4 18.22 21.37CCP-12M10 11754 M42 10mm 3/8 1 2-11/16 4 18.22 24.34CCP-12M10.5 11755 M42 10.5mm 3/8 1 2-11/16 4 19.36 25.47CCP-12M11 11756 M42 11mm 3/8 1 2-11/16 4 19.36 25.47CCP-12M11.5 11757 M42 11.5mm 3/8 1 2-11/16 4 21.52 27.58CCP-12M12 11758 M42 12mm 3/8 1 2-11/16 4 21.52 27.58CCP-16M12.5 11759 M42 12.5mm 1/2 1-1/4 3-1/4 4 22.98 28.93CCP-16M13 11760 M42 13mm 1/2 1-3/8 3-3/8 4 22.98 28.93CCP-16M13.5 11761 M42 13.5mm 1/2 1-3/8 3-3/8 4 25.04 32.66CCP-16M14 11762 M42 14mm 1/2 1-3/8 3-3/8 4 25.04 32.66CCP-16M14.5 11763 M42 14.5mm 1/2 1-3/8 3-3/8 4 27.63 33.86CCP-16M15 11764 M42 15mm 1/2 1-3/8 3-3/8 4 27.63 35.64CCP-20M16 11766 M42 16mm 5/8 1-5/8 3-3/4 4 28.12 35.64CCP-20M17 11768 M42 17mm 5/8 1-5/8 3-3/4 4 31.53 44.18CCP-20M18 11770 M42 18mm 5/8 1-5/8 3-3/4 4 31.64 43.75CCP-24M19 11772 M42 19mm 3/4 1-5/8 3-7/8 4 34.18 49.00CCP-24M20 11774 M42 20mm 3/4 1-7/8 4-1/8 4 37.80 52.51CCP-24M21 11776 M42 21mm 3/4 1-7/8 4-1/8 4 41.15 55.86CCP-24M22 11778 M42 22mm 3/4 1-7/8 4-1/8 4 45.16 59.87CCP-28M23 11780 M42 23mm 7/8 1-7/8 4-1/8 4 52.19 66.90CCP-32M24 11782 M42 24mm 1 2 4-1/2 4 57.76 74.68CCP-32M25 11784 M42 25mm 1 2 4-1/2 4 58.30 74.47CCP-32M28 11786 M42 28mm 1 2 4-1/2 4 63.60 80.25CCP-32M32 11788 M42 32mm 1 2 4-1/2 4 77.45 131.08CCP-32M35 11790 M42 35mm 1 2 4-1/2 4 100.77 158.12CCP-32M36 11792 M42 36mm 1 2 4-1/2 4 100.77 158.12CCP-40M40 11794 M42 40mm 1-1/4 2 4-1/2 4 114.02 171.31CCP-40M45 11796 M42 45mm 1-1/4 2 4-1/2 4 131.77 189.12CCP-40M50 11798 M42 50mm 1-1/4 2 4-1/2 4 148.51 205.80

CO

BA

LT H

SS

EN

D M

ILLS

- M

ET

RIC

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 99



AP-12M3-B 12898 M42 3mm 3/8 5/16 2-5/16 2 21.25 25.15AP-12M4-B 12900 M42 4mm 3/8 7/16 2-5/16 2 21.25 25.15AP-12M5-B 12902 M42 5mm 3/8 1/2 2-5/16 2 21.25 25.15AP-12M6-B 12904 M42 6mm 3/8 1/2 2-5/16 2 21.96 25.80AP-12M7-B 12906 M42 7mm 3/8 9/16 2-3/8 2 21.96 25.80AP-12M8-B 12908 M42 8mm 3/8 9/16 2-5/16 2 21.96 25.80AP-12M9-B 12910 M42 9mm 3/8 9/16 2-5/16 2 22.38 26.29AP-12M10-B 12912 M42 10mm 3/8 13/16 2-1/2 2 26.23 32.34AP-12M11-B 12914 M42 11mm 3/8 13/16 2-1/2 2 27.78 34.01AP-12M12-B 12916 M42 12mm 3/8 13/16 2-1/2 2 28.45 34.56AP-16M13-B 12918 M42 13mm 1/2 1-1/8 3-1/8 2 32.03 38.09AP-16M14-B 12920 M42 14mm 1/2 1-1/8 3-1/8 2 34.07 40.52

BALL END METRIC/INCH ENDMILLS2 FLUTE, SINGLE END* These end mills have metric diameters, however, the overall length, length of cut, and shank are all inch dimensions. * Used for radius or contouring part surfaces. * Materials ranging from nickel base alloy, stainless, tough alloys, and abrasive materials.* Standard, medium, and long lengths.

Tolerance +.0005/-.0005.

BALL END METRIC/INCH ENDMILLS4 FLUTE, SINGLE END* These end mills have metric diameters, however, the overall length, length of cut, and shank are all inch dimensions. * Used for radius or contouring part surfaces. * Materials ranging from nickel base alloy, stainless, tough alloys, and abrasive materials.* Standard, medium, and long lengths.

Tolerance +.0005/-.0005.


CCP-12M3-B 13002 M42 3mm 3/8 3/8 2-5/16 4 18.82 22.66CCP-12M4-B 13004 M42 4mm 3/8 7/16 2-5/16 4 18.82 22.66CCP-12M5-B 13006 M42 5mm 3/8 9/16 2-1/2 4 18.82 22.66CCP-12M6-B 13008 M42 6mm 3/8 5/8 2-1/2 4 19.41 23.31CCP-12M7-B 13010 M42 7mm 3/8 11/16 2-1/2 4 19.79 23.76CCP-12M8-B 13012 M42 8mm 3/8 3/4 2-1/2 4 19.41 23.31CCP-12M9-B 13014 M42 9mm 3/8 3/4 2-1/2 4 19.79 23.76CCP-12M10-B 13016 M42 10mm 3/8 1 2-11/16 4 26.23 32.34CCP-12M11-B 13018 M42 11mm 3/8 1 2-11/16 4 27.78 34.01CCP-12M12-B 13020 M42 12mm 3/8 1 2-11/16 4 28.45 34.56CCP-16M13-B 13022 M42 13mm 1/2 1-1/4 3-1/4 4 32.03 38.09CCP-16M14-B 13024 M42 14mm 1/2 1-3/8 3-3/8 4 33.42 40.61

CO

BA

LT H

SS

EN

D M

ILLS -M

ET

RIC

100



B-12M3 12922 M42 3mm 3/8 3/8 3-1/16 2 16.49 22.39B-12M4 12924 M42 4mm 3/8 7/16 3-1/8 2 16.49 22.39B-12M5 12926 M42 5mm 3/8 1/2 3-1/8 2 16.49 22.39B-12M6 12928 M42 6mm 3/8 1/2 3-1/8 2 17.03 22.88B-12M7 12930 M42 7mm 3/8 9/16 3-1/8 2 17.03 22.88B-12M8 12932 M42 8mm 3/8 9/16 3-1/8 2 17.03 22.88B-12M9 12934 M42 9mm 3/8 9/16 3-1/8 2 17.03 22.88B-16M10 12936 M42 10mm 1/2 13/16 3-3/4 2 26.44 36.83B-16M11 12938 M42 11mm 1/2 13/16 3-3/4 2 26.96 37.54B-16M12 12940 M42 12mm 1/2 13/16 3-3/4 2 26.44 36.83B-20M13 12942 M42 13mm 5/8 1-1/8 4-1/2 2 37.37 48.62B-20M14 12944 M42 14mm 5/8 1-1/8 5 2 37.37 48.62B-20M15 12946 M42 15mm 5/8 1-1/8 5 2 37.37 48.62B-24M16 12948 M42 16mm 3/4 1-5/16 5 2 48.81 70.94B-24M18 12950 M42 18mm 3/4 1-5/16 5 2 48.81 70.94B-28M20 12952 M42 20mm 7/8 1-9/16 5-1/2 2 62.68 84.70B-28M22 12954 M42 22mm 7/8 1-9/16 5-1/2 2 62.68 84.70


DD-12M3 13026 M42 3mm 3/8 3/8 3-1/16 4 17.03 22.88DD-12M4 13028 M42 4mm 3/8 7/16 3-1/8 4 17.03 22.88DD-12M5 13030 M42 5mm 3/8 9/16 3-1/4 4 17.03 22.88DD-12M6 13032 M42 6mm 3/8 5/8 3-3/8 4 17.36 24.28DD-12M7 13034 M42 7mm 3/8 11/16 3-3/8 4 17.69 24.75DD-12M8 13036 M42 8mm 3/8 3/4 3-1/2 4 17.36 24.28DD-12M9 13038 M42 9mm 3/8 3/4 3-1/2 4 17.36 24.28DD-16M10 13040 M42 10mm 1/2 1 4-1/8 4 26.50 36.88DD-16M11 13042 M42 11mm 1/2 1 4-1/8 4 26.50 36.88DD-16M12 13044 M42 12mm 1/2 1 4-1/8 4 26.50 36.88DD-20M13 13046 M42 13mm 5/8 1-3/8 5 4 38.81 50.50DD-20M14 13048 M42 14mm 5/8 1-3/8 5 4 38.81 50.50DD-20M15 13050 M42 15mm 5/8 1-3/8 5 4 38.81 50.50DD-24M16 13052 M42 16mm 3/4 1-5/8 5-5/8 4 48.87 90.77DD-24M18 13054 M42 18mm 3/4 1-5/8 5-5/8 4 48.87 90.77DD-28M20 13056 M42 20mm 7/8 1-7/8 6-1/8 4 62.68 104.47DD-28M22 13058 M42 22mm 7/8 1-7/8 6-1/8 4 62.68 104.47

METRIC / INCH END MILLS2 FLUTE, DOUBLE END, CENTER CUTTING* These end mills have metric diameters, however, the overall length, length of cut, and shank are all inch dimensions. * Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron etc.* Can be used in profi ling, slotting, keyways and pockets.

Tolerance +.0000/-.0015.

METRIC / INCH END MILLS4 FLUTE, DOUBLE END, CENTER CUTTING* These end mills have metric diameters, however, the overall length, length of cut, and shank are all inch dimensions. * Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron etc.* Can be used in profi ling, slotting, keyways and pockets.

Tolerance +.0000/-.0015.

CO

BA

LT H

SS

EN

D M

ILLS

- M

ET

RIC

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 101



METRIC END MILLS2 FLUTE, SINGLE END, CENTER CUTTING* Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron etc.* Can be used in profi ling, slotting, keyways and pockets.

Tolerance +.040mm/-.0000.


A-M6M2 16339 M42 2 6 7 57 2 15.41 20.16A-M6M3 16340 M42 3 6 8 57 2 15.15 19.90A-M6M4 16341 M42 4 6 11 57 2 14.89 19.64A-M6M5 16342 M42 5 6 13 57 2 14.63 19.37A-M6M6 16343 M42 6 6 13 57 2 14.37 19.11A-M10M7 16344 M42 7 10 16 69 2 16.72 23.12A-M10M8 16345 M42 8 10 19 69 2 16.46 22.85A-M10M9 16346 M42 9 10 19 69 2 16.20 22.59A-M10M10 16347 M42 10 10 22 72 2 16.72 23.12A-M12M11 16348 M42 11 12 22 79 2 18.81 25.21A-M12M12 16349 M42 12 12 26 83 2 18.55 24.94A-M12M13 16350 M42 13 12 26 83 2 19.33 25.73A-M12M14 16351 M42 14 12 26 83 2 19.86 26.25A-M12M15 16352 M42 15 12 26 83 2 20.38 26.77A-M16M16 16353 M42 16 16 32 92 2 21.95 29.56A-M16M17 16354 M42 17 16 32 92 2 22.99 30.61A-M16M18 16355 M42 18 16 32 92 2 25.08 32.70A-M16M19 16356 M42 19 16 32 92 2 26.13 33.74A-M20M20 16357 M42 20 20 38 104 2 30.31 45.77A-M20M21 16358 M42 21 20 38 104 2 30.83 46.29A-M20M22 16359 M42 22 20 38 104 2 31.35 46.82A-M20M23 16360 M42 23 20 38 104 2 32.40 47.86A-M25M24 16361 M42 24 25 45 121 2 40.23 57.11A-M25M25 16362 M42 25 25 45 121 2 41.80 58.68A-M25M30 16363 M42 30 25 45 121 2 61.13 79.27A-M32M32 16364 M42 32 32 53 133 2 65.31 83.45

CO

BA

LT H

SS

EN

D M

ILLS -M

ET

RIC

102




METRIC END MILLS4 FLUTE, SINGLE END, CENTER CUTTING* Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron etc.* Can be used in profi ling, slotting, keyways and pockets.



CC-M6M2 16365 M42 2 6 7 57 4 16.98 21.73CC-M6M3 16366 M42 3 6 8 57 4 16.72 21.46CC-M6M4 16367 M42 4 6 11 57 4 16.46 21.20CC-M6M5 16368 M42 5 6 13 57 4 16.20 20.94CC-M6M6 16369 M42 6 6 13 57 4 17.50 22.25CC-M10M7 16370 M42 7 10 16 69 4 17.24 23.64CC-M10M8 16371 M42 8 10 19 69 4 16.98 23.38CC-M10M9 16372 M42 9 10 19 69 4 18.03 24.42CC-M10M10 16373 M42 10 10 22 72 4 18.55 24.94CC-M12M11 16374 M42 11 12 22 79 4 21.95 28.34CC-M12M12 16375 M42 12 12 26 83 4 21.68 28.08CC-M12M13 16376 M42 13 12 26 83 4 21.95 28.34CC-M12M14 16377 M42 14 12 26 83 4 22.21 28.60CC-M12M15 16378 M42 15 12 26 83 4 22.47 28.86CC-M16M16 16379 M42 16 16 32 92 4 24.30 31.91CC-M16M17 16380 M42 17 16 32 92 4 25.34 32.96CC-M16M18 16381 M42 18 16 32 92 4 27.69 35.31CC-M16M19 16382 M42 19 16 32 92 4 28.74 36.36CC-M20M20 16383 M42 20 20 38 104 4 33.44 48.91

METRIC END MILLS4 FLUTE, SINGLE END, NON-CENTER CUTTING* Used for general purpose milling in most materials of medium and tough alloy materials such as stainless steel, nickel base alloy, brass, iron etc.* Can be used in profi ling, slotting, keyways and pockets.



C-M20M21 16384 M42 21 20 38 104 6 38.67 54.13C-M20M22 16385 M42 22 20 38 104 6 39.19 54.65C-M20M23 16386 M42 23 20 38 104 6 40.49 55.96C-M25M24 16387 M42 24 25 45 121 6 52.25 69.13C-M25M25 16388 M42 25 25 45 121 6 50.16 67.04C-M25M30 16389 M42 30 25 45 121 6 76.29 94.43C-M32M32 16390 M42 32 32 53 133 6 80.99 99.13

CO

BA

LT H

SS

EN

D M

ILLS

- M

ET

RIC

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 103



METRIC END MILLS, BALL END2 FLUTE, SINGLE END* Used for radius or contouring part surfaces. * Materials ranging from nickel base alloy, stainless, tough alloys, and abrasive materials.* Standard, medium, and long lengths.

Tolerance +.015mm/-.015mm.


A-M6M2-B 16411 M42 2 6 7 57 2 24.66 29.41A-M6M3-B 16412 M42 3 6 8 57 2 24.24 28.99A-M6M4-B 16413 M42 4 6 11 57 2 23.83 28.57A-M6M5-B 16414 M42 5 6 13 57 2 23.41 28.15A-M6M6-B 16415 M42 6 6 13 57 2 22.99 27.73A-M10M7-B 16416 M42 7 10 16 69 2 26.75 33.15A-M10M8-B 16417 M42 8 10 19 69 2 26.33 32.73A-M10M9-B 16418 M42 9 10 19 69 2 25.92 32.31A-M10M10-B 16419 M42 10 10 22 72 2 26.75 33.15A-M12M11-B 16420 M42 11 12 22 79 2 30.10 36.49A-M12M12-B 16421 M42 12 12 26 83 2 29.68 36.07A-M12M13-B 16422 M42 13 12 26 83 2 30.93 37.33A-M12M14-B 16423 M42 14 12 26 83 2 31.77 38.16A-M12M15-B 16424 M42 15 12 26 83 2 32.60 39.00A-M16M16-B 16425 M42 16 16 32 92 2 35.11 42.73A-M16M17-B 16426 M42 17 16 32 92 2 36.78 44.40A-M16M18-B 16427 M42 18 16 32 92 2 40.13 47.75A-M16M19-B 16428 M42 19 16 32 92 2 41.80 49.42A-M20M20-B 16429 M42 20 20 38 104 2 48.49 63.95A-M20M21-B 16430 M42 21 20 38 104 2 49.32 64.79A-M20M22-B 16431 M42 22 20 38 104 2 50.16 65.63A-M20M23-B 16432 M42 23 20 38 104 2 51.83 67.30A-M25M24-B 16433 M42 24 25 45 121 2 64.37 81.25A-M25M25-B 16434 M42 25 25 45 121 2 66.88 83.76A-M25M30-B 16435 M42 30 25 45 121 2 97.81 115.95A-M32M32-B 16436 M42 32 32 53 133 2 104.50 122.64

CO

BA

LT H

SS

EN

D M

ILLS -M

ET

RIC

104


Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230


METRIC END MILLS, BALL END4 FLUTE, SINGLE END* Used for radius or contouring part surfaces. * Materials ranging from nickel base alloy, stainless, tough alloys, and abrasive materials.* Standard, medium, and long lengths.

Tolerance +.015mm/-.015mm.


CC-M6M2-B 17964 M42 2 6 7 57 4 32.92 37.66CC-M6M3-B 17965 M42 3 6 8 57 4 32.24 36.98CC-M6M4-B 17966 M42 4 6 11 57 4 31.72 36.46CC-M6M5-B 17967 M42 5 6 13 57 4 31.14 35.89CC-M6M6-B 17968 M42 6 6 13 57 4 30.57 35.31CC-M10M7-B 17969 M42 7 10 16 69 4 35.53 41.93CC-M10M8-B 17970 M42 8 10 19 69 4 35.01 41.40CC-M10M9-B 17971 M42 9 10 19 69 4 34.49 40.88CC-M10M10-B 17972 M42 10 10 22 72 4 35.53 41.93CC-M12M11-B 17973 M42 11 12 22 79 4 40.02 46.42CC-M12M12-B 17974 M42 12 12 26 83 4 39.45 45.84CC-M12M13-B 17975 M42 13 12 26 83 4 41.17 47.57CC-M12M14-B 17976 M42 14 12 26 83 4 42.27 48.67CC-M12M15-B 17977 M42 15 12 26 83 4 43.37 49.76CC-M16M16-B 17978 M42 16 16 32 92 4 46.61 54.23CC-M16M17-B 17979 M42 17 16 32 92 4 48.96 56.58CC-M16M18-B 17980 M42 18 16 32 92 4 53.30 60.91CC-M16M19-B 17981 M42 19 16 32 92 4 55.59 63.21CC-M20M20-B 17982 M42 20 20 38 104 4 64.53 79.99CC-M20M21-B 17983 M42 21 20 38 104 4 65.57 81.04CC-M20M22-B 17984 M42 22 20 38 104 4 66.72 82.19CC-M20M23-B 17985 M42 23 20 38 104 4 68.97 84.44CC-M25M24-B 17986 M42 24 25 45 121 4 88.83 105.70CC-M25M25-B 17987 M42 25 25 45 121 4 85.69 102.57CC-M25M30-B 17988 M42 30 25 45 121 4 117.04 135.18CC-M32M32-B 17989 M42 32 32 53 133 4 130.63 148.77


CCFP-M6M6 16391 M42 6 6 13 57 3 18.81 23.55CCFP-M10M7 16392 M42 7 10 16 69 4 23.25 29.65CCFP-M10M8 16393 M42 8 10 19 69 3 22.99 29.39CCFP-M10M9 16394 M42 9 10 19 69 4 22.73 29.12CCFP-M10M10 16395 M42 10 10 22 72 4 22.47 28.86CCFP-M12M11 16396 M42 11 12 22 79 4 25.08 31.48CCFP-M12M12 16397 M42 12 12 26 83 4 24.56 30.95CCFP-M12M13 16398 M42 13 12 26 83 4 25.08 31.48CCFP-M12M14 16399 M42 14 12 26 83 4 26.13 32.52CCFP-M12M15 16400 M42 15 12 26 83 4 27.17 33.57CCFP-M16M16 16401 M42 16 16 32 92 4 29.78 37.40CCFP-M16M18 16402 M42 18 16 32 92 4 34.75 42.36CCFP-M20M20 16403 M42 20 20 38 104 4 38.67 54.13CCFP-M20M22 16404 M42 22 20 38 104 4 40.23 55.70CCFP-M25M24 16405 M42 24 25 45 121 4 53.30 70.17CCFP-M25M25 16406 M42 25 25 45 121 4 51.73 68.60

METRIC FINE PITCH ROUGHERMULTIPLE FLUTE, CENTER CUTTING* Due to the fi ner sinusoidal form on cutting edge, fi ner chips are produced than coarse pitch, which are easier fl ushed away and reduce re-cutting and packing. * A rough fi nish is produced which will require a fi nishing pass.

Tolerance +.125mm/-.125mm

CO

BA

LT H

SS

EN

D M

ILLS

- M

ET

RIC

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 105

To ensure the proper performance and life of the Weler Milling Chuck, white grease must be applied as needed to the threads and taper that the locking nut is fastened to. There are no wear parts during normal use of the Weler Chuck and this is the only maintenance required. A tube of white grease is included with every chuck.

WELER MILLING CHUCK FOR HIGH PERFORMANCE MILLING* Over 350 ft/lb of clamping force* Balanced to G2.5 @20,000 RPM* Slim nose design * No needle bearings * .0001” runout at 2-1/2 times the diameter

TOOL NAME EDP SHANK d mm

D inch

D1 inch

L inch

L1 inch

LIST PRICE

520000/40CAT 15021 CAT40 20 1.732 1.929 3.386 0.906 359.00532000/40CAT 15023 CAT40 32 2.559 2.677 3.898 1.299 369.00520000/50CAT 15029 CAT50 20 1.732 1.929 3.386 0.906 389.00532000/50CAT 15031 CAT50 32 2.559 2.677 3.898 1.299 399.00531700/50CAT 15066 CAT50 31.75 1-1/4 2.559 3.898 1.299 439.00

TOOL NAME EDP SHANK d mm

D inch

D1 inch

L inch

L1 inch

LIST PRICE

520000/H50A 15068 HSK-A50 20 1.732 1.929 3.976 0.906 489.00520000/H63A 15005 HSK-A63 20 1.732 1.929 3.976 0.906 429.00

CAT 40 - CAT 50

HSK-63A

TOOL NAME EDP OD D

ID d

LENGTH L

LIST PRICE

9020.20.03 15070 20 3mm 2.126 105.339020.20.1/8 15050 20 1/8 2.126 105.339020.20.04 15071 20 4mm 2.126 105.339020.20.3/16 15051 20 3/16 2.126 105.339020.20.05 15072 20 5mm 2.126 105.339020.20.06 15073 20 6mm 2.126 105.339020.20.1/4 15052 20 1/4 2.126 105.339020.20.5/16 15053 20 5/16 2.126 105.339020.20.08 15074 20 8mm 2.126 105.339020.20.3/8 15049 20 3/8 2.126 105.339020.20.10 15075 20 10mm 2.126 105.339020.20.7/16 15054 20 7/16 2.126 105.339020.20.12 15076 20 12mm 2.126 105.339020.20.1/2 15055 20 1/2 2.126 105.339020.20.14 15077 20 14mm 2.126 105.339020.20.5/8 15056 20 5/8 2.126 105.339020.20.16 15078 20 16mm 2.126 105.33

TOOL NAME EDP OD D

ID d

LENGTH L

LIST PRICE

9020.32.06 15079 32 6mm 2.520 118.669020.32.1/4 15057 32 1/4 2.520 118.669020.32.5/16 15058 32 5/16 2.520 118.669020.32.08 15080 32 8mm 2.520 118.669020.32.3/8 15065 32 3/8 2.520 118.669020.32.10 15081 32 10mm 2.520 118.669020.32.7/16 15059 32 7/16 2.520 118.669020.32.12 15082 32 12mm 2.520 118.669020.32.1/2 15060 32 1/2 2.520 118.669020.32.14 15083 32 14mm 2.520 118.669020.32.5/8 15061 32 5/8 2.520 118.669020.32.16 15084 32 16mm 2.520 118.669020.32.18 15085 32 18mm 2.520 118.669020.32.3/4 15062 32 3/4 2.520 118.669020.32.20 15086 32 20mm 2.520 118.669020.32.7/8 15063 32 7/8 2.520 118.669020.32.24 15087 32 24mm 2.520 118.669020.32.1 15064 32 1" 2.520 118.66

20mm REDUCTION SLEEVES 32mm REDUCTION SLEEVES

Why use a Weler Milling Chuck?A Weler Milling Chuck will help improve machining efficiency, tool life, and increase your productivity. Many

shops are still using the side lock set screw endmill holder. When this tool was designed, most spindle speeds did not exceed 3,000 RPM and high speed tools were the predominant choice. The collet holder does not have enough grip-ping force to hold more than a 3/4” diameter tool under a full slotting load and something was needed to prevent the tools from spinning in the holder. At the time, the side lock holder was the best answer. Even though its design sacri-ficed rigidity and concentricity, it was a good trade off THEN.

TODAY, machines have much higher spindle speeds and carbide is often the tooling of choice. Today’s higher performance environment warrants the use of a higher performance milling chuck such as the Weler.

HIG

H P

ER

FOR

MA

NC

E M

ILLING

CH

UC

KS

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230

BODY DIA.

SHANK DIA. ENDS MATERIAL

GRADE 82 LIST PRICE

3/16 3/16 DE HSS HS0-3/16-82 10.101/4 1/4 DE HSS HS0-1/4-82 11.00

7/16 1/4 SE HSS HS0-7/16-82 14.409/16 1/4 SE HSS HS0-9/16-82 18.00

13/16 1/2 SE HSS HS0-13/16-82 32.501-1/8 1/2 SE HSS HS0-1-1/8-82 52.401-1/2 1/2 SE HSS HS0-1-1/2-82 122.70

ZERO FLUTE COUNTERSINKS - HSSSINGLE END* Designed with a radial relieved single edge for fast removal without chatter.* Made from HSS material. Also available in M42 8% cobalt. * 3/16” and 1/4” are double end.

BODY DIA.

SHANK DIA. ENDS MATERIAL

GRADE 60 82 90 LIST PRICE

1/4 1/4 DE M42 HSP0-1/4-60 HSP0-1/4-82 HSP0-1/4-90 13.757/16 1/4 SE M42 HSP0-7/16-60 HSP0-7/16-82 HSP0-7/16-90 18.009/16 1/4 SE M42 HSP0-9/16-60 HSP0-9/16-82 HSP0-9/16-90 22.50

13/16 1/2 SE M42 HSP0-13/16-60 HSP0-13/16-82 HSP0-13/16-90 40.631-1/8 1/2 SE M42 HSP0-1-1/8-60 HSP0-1-1/8-82 HSP0-1-1/8-90 65.50

ZERO FLUTE COUNTERSINKS - M42 8% COBALTSINGLE END* Designed with a radial relieved single edge for fast removal without chatter.* Higher heat and abrasion resistance for use on high-tensile alloys, stainless steel, and other hard to machine abrasive materials.* Made from M42 8% cobalt material. Also available in HSS.

CO

UN

TE

RS

INK

S

BODY DIA.

SHANK DIA.

MATERIAL GRADE 60 82 90 100 120 LIST

PRICE1/8 1/8 HSS HS1-1/8-60 HS1-1/8-82 HS1-1/8-90 HS1-1/8-100 HS1-1/8-120 6.90

3/16 3/16 HSS HS1-3/16-60 HS1-3/16-82 HS1-3/16-90 HS1-3/16-100 HS1-3/16-120 7.001/4 1/4 HSS HS1-1/4-60 HS1-1/4-82 HS1-1/4-90 HS1-1/4-100 HS1-1/4-120 7.30

5/16 1/4 HSS HS1-5/16-60 HS1-5/16-82 HS1-5/16-90 HS1-5/16-100 HS1-5/16-120 8.153/8 1/4 HSS HS1-3/8-60 HS1-3/8-82 HS1-3/8-90 HS1-3/8-100 HS1-3/8-120 8.201/2 3/8 HSS HS1-1/2-60 HS1-1/2-82 HS1-1/2-90 HS1-1/2-100 HS1-1/2-120 10.001/2 1/4 HSS HS1-1/2-60-1/4 HS1-1/2-82-1/4 HS1-1/2-90-1/4 HS1-1/2-100-1/4 HS1-1/2-120-1/4 10.005/8 3/8 HSS HS1-5/8-60 HS1-5/8-82 HS1-5/8-90 HS1-5/8-100 HS1-5/8-120 13.605/8 1/4 HSS HS1-5/8-60-1/4 HS1-5/8-82-1/4 HS1-5/8-90-1/4 HS1-5/8-100-1/4 HS1-5/8-120-1/4 13.605/8 1/2 HSS HS1-5/8-60-1/2 HS1-5/8-82-1/2 HS1-5/8-90-1/2 HS1-5/8-100-1/2 HS1-5/8-120-1/2 13.603/4 1/2 HSS HS1-3/4-60 HS1-3/4-82 HS1-3/4-90 HS1-3/4-100 HS1-3/4-120 19.607/8 1/2 HSS HS1-7/8-60 HS1-7/8-82 HS1-7/8-90 HS1-7/8-100 HS1-7/8-120 30.801 1/2 HSS HS1-1-60 HS1-1-82 HS1-1-90 HS1-1-100 HS1-1-120 32.70

1-1/4 1/2 HSS HS1-1-1/4-60 HS1-1-1/4-82 HS1-1-1/4-90 HS1-1-1/4-100 HS1-1-1/4-120 64.001-1/2 3/4 HSS HS1-1-1/2-60 HS1-1-1/2-82 HS1-1-1/2-90 HS1-1-1/2-100 HS1-1-1/2-120 86.001-3/4 3/4 HSS HS1-1-3/4-60 HS1-1-3/4-82 HS1-1-3/4-90 HS1-1-3/4-100 HS1-1-3/4-120 138.00

2 3/4 HSS HS1-2-60 HS1-2-82 HS1-2-90 HS1-2-100 HS1-2-120 156.002-1/2 3/4 HSS HS1-2-1/2-60 HS1-2-1/2-82 HS1-2-1/2-90 HS1-2-1/2-100 HS1-2-1/2-120 400.00

3 3/4 HSS HS1-3-60 HS1-3-82 HS1-3-90 HS1-3-100 HS1-3-120 470.00

SINGLE FLUTE COUNTERSINKS - HSSSINGLE END* Radial relief generated in the first 90 degrees behind the cutting edge ensures smooth, chatter-free cutting without overfeeding and makes the tool self-centering.* Black oxide surface treatment enhances tool life and prevents galling.* Excellent countersink for use in hand held applications.* Made from HSS. Also available in M42 8% cobalt and solid carbide.

106

** Contact our sales department for a complete countersink tool listing with EDP numbers. **

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 107

CO

UN

TE

RS

INK

S

BODY DIA.

SHANK DIA.

MATERIAL GRADE 60 82 90 LIST

PRICE1/8 1/8 M42 HSP1-1/8-60 HSP1-1/8-82 HSP1-1/8-90 7.60

3/16 3/16 M42 HSP1-3/16-60 HSP1-3/16-82 HSP1-3/16-90 8.141/4 1/4 M42 HSP1-1/4-60 HSP1-1/4-82 HSP1-1/4-90 8.363/8 1/4 M42 HSP1-3/8-60 HSP1-3/8-82 HSP1-3/8-90 11.221/2 1/4 M42 HSP1-1/2-60 HSP1-1/2-82 HSP1-1/2-90 15.305/8 3/8 M42 HSP1-5/8-60 HSP1-5/8-82 HSP1-5/8-90 21.043/4 1/2 M42 HSP1-3/4-60 HSP1-3/4-82 HSP1-3/4-90 30.361 1/2 M42 HSP1-1-60 HSP1-1-82 HSP1-1-90 44.00

1-1/4 1/2 M42 HSP1-1-1/4-60 HSP1-1-1/4-82 HSP1-1-1/4-90 66.38

BODY DIA.

SHANK DIA.


PRICE1/8 1/8 M42 HSP1-1/8-60T HSP1-1/8-82T HSP1-1/8-90T HSP1-1/8-100T HSP1-1/8-120T 9.12

3/16 3/16 M42 HSP1-3/16-60T HSP1-3/16-82T HSP1-3/16-90T HSP1-3/16-100T HSP1-3/16-120T 9.601/4 1/4 M42 HSP1-1/4-60T HSP1-1/4-82T HSP1-1/4-90T HSP1-1/4-100T HSP1-1/4-120T 9.903/8 1/4 M42 HSP1-3/8-60T HSP1-3/8-82T HSP1-3/8-90T HSP1-3/8-100T HSP1-3/8-120T 12.661/2 3/8 M42 HSP1-1/2-60T HSP1-1/2-82T HSP1-1/2-90T HSP1-1/2-100T HSP1-1/2-120T 17.865/8 3/8 M42 HSP1-5/8-60T HSP1-5/8-82T HSP1-5/8-90T HSP1-5/8-100T HSP1-5/8-120T 23.903/4 1/2 M42 HSP1-3/4-60T HSP1-3/4-82T HSP1-3/4-90T HSP1-3/4-100T HSP1-3/4-120T 36.241 1/2 M42 HSP1-1-60T HSP1-1-82T HSP1-1-90T HSP1-1-100T HSP1-1-120T 50.52

1-1/4 1/2 M42 HSP1-1-1/4-60T HSP1-1-1/4-82T HSP1-1-1/4-90T HSP1-1-1/4-100T HSP1-1-1/4-120T 74.44

SINGLE FLUTE COUNTERSINKS - M42 8% COBALTSINGLE END* Excellent for countersinking abrasive, high-strength, heat resistant, exotic, and other difficult to machine materials.* Made from M42 8% cobalt material. Also available in HSS.

SINGLE FLUTE COUNTERSINKS - M42 8% COBALTSINGLE END, TiN COATED* TiN coated for higher surface hardness and better lubricity.* Coating can also help to enhance productivity and extend tool life.

BODY DIA.

SHANK DIA.

MATERIAL GRADE 60 82 90 100 110 120 LIST

PRICE1/8 1/8 HSS DHS1-1/8-60 DHS1-1/8-82 DHS1-1/8-90 DHS1-1/8-100 DHS1-1/8-110 DHS1-1/8-120 10.60

3/16 3/16 HSS DHS1-3/16-60 DHS1-3/16-82 DHS1-3/16-90 DHS1-3/16-100 DHS1-3/16-110 DHS1-3/16-120 11.421/4 1/4 HSS DHS1-1/4-60 DHS1-1/4-82 DHS1-1/4-90 DHS1-1/4-100 DHS1-1/4-110 DHS1-1/4-120 11.80

5/16 5/16 HSS DHS1-5/16-60 DHS1-5/16-82 DHS1-5/16-90 DHS1-5/16-100 DHS1-5/16-110 DHS1-5/16-120 13.403/8 3/8 HSS DHS1-3/8-60 DHS1-3/8-82 DHS1-3/8-90 DHS1-3/8-100 DHS1-3/8-110 DHS1-3/8-120 15.001/2 1/2 HSS DHS1-1/2-60 DHS1-1/2-82 DHS1-1/2-90 DHS1-1/2-100 DHS1-1/2-110 DHS1-1/2-120 18.705/8 5/8 HSS DHS1-5/8-60 DHS1-5/8-82 DHS1-5/8-90 DHS1-5/8-100 DHS1-5/8-110 DHS1-5/8-120 26.503/4 3/4 HSS DHS1-3/4-60 DHS1-3/4-82 DHS1-3/4-90 DHS1-3/4-100 DHS1-3/4-110 DHS1-3/4-120 38.00

SINGLE FLUTE COUNTERSINKS - HSSDOUBLE END* 2 cutting edges give you twice the tool life of a single end tool.* Made from HSS. Also available in solid carbide.

BODY DIA.

SHANK DIA.


PRICE1/8 1/8 CARBIDE C1-1/8-60 C1-1/8-82 C1-1/8-90 C1-1/8-100 C1-1/8-120 10.00

3/16 3/16 CARBIDE C1-3/16-60 C1-3/16-82 C1-3/16-90 C1-3/16-100 C1-3/16-120 12.801/4 1/4 CARBIDE C1-1/4-60 C1-1/4-82 C1-1/4-90 C1-1/4-100 C1-1/4-120 15.40

5/16 1/4 CARBIDE C1-5/16-60 C1-5/16-82 C1-5/16-90 C1-5/16-100 C1-5/16-120 23.803/8 1/4 CARBIDE C1-3/8-60 C1-3/8-82 C1-3/8-90 C1-3/8-100 C1-3/8-120 30.101/2 3/8 CARBIDE C1-1/2-60 C1-1/2-82 C1-1/2-90 C1-1/2-100 C1-1/2-120 42.005/8 1/2 CARBIDE C1-5/8-60 C1-5/8-82 C1-5/8-90 C1-5/8-100 C1-5/8-120 55.003/4 1/2 CARBIDE C1-3/4-60 C1-3/4-82 C1-3/4-90 C1-3/4-100 C1-3/4-120 78.001 1/2 CARBIDE C1-1-60 C1-1-82 C1-1-90 C1-1-100 C1-1-120 128.00

SINGLE FLUTE COUNTERSINKS - CARBIDESINGLE END* For highly abrasive and hard to machine materials.* For production applications in cast iron, alloy steel, or glass reinforced plastics.* Carbide eliminates the high cost of tool changes in production situations.* Rigid set up is a must - not suited for hand held applications.* Tools 3/8” and over have solid carbide heads on hardened steel shanks.

TiN


108 Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230

SINGLE FLUTE COUNTERSINKS - CARBIDEDOUBLE END* 2 cutting edges give you twice the tool life of a single end tool.* Made from premium submicron grain carbide. Also available in HSS.

BODY DIA.

SHANK DIA.


PRICE1/8 1/8 CARBIDE DC1-1/8-60 DC1-1/8-82 DC1-1/8-90 DC1-1/8-100 DC1-1/8-110 DC1-1/8-120 17.50

3/16 3/16 CARBIDE DC1-3/16-60 DC1-3/16-82 DC1-3/16-90 DC1-3/16-100 DC1-3/16-110 DC1-3/16-120 22.501/4 1/4 CARBIDE DC1-1/4-60 DC1-1/4-82 DC1-1/4-90 DC1-1/4-100 DC1-1/4-110 DC1-1/4-120 28.40

5/16 5/16 CARBIDE DC1-5/16-60 DC1-5/16-82 DC1-5/16-90 DC1-5/16-100 DC1-5/16-110 DC1-5/16-120 45.503/8 3/8 CARBIDE DC1-3/8-60 DC1-3/8-82 DC1-3/8-90 DC1-3/8-100 DC1-3/8-110 DC1-3/8-120 54.001/2 1/2 CARBIDE DC1-1/2-60 DC1-1/2-82 DC1-1/2-90 DC1-1/2-100 DC1-1/2-110 DC1-1/2-120 73.905/8 5/8 CARBIDE DC1-5/8-60 DC1-5/8-82 DC1-5/8-90 DC1-5/8-100 DC1-5/8-110 DC1-5/8-120 98.003/4 3/4 CARBIDE DC1-3/4-60 DC1-3/4-82 DC1-3/4-90 DC1-3/4-100 DC1-3/4-110 DC1-3/4-120 140.00

BODY DIA.

SHANK DIA.


PRICE

1/8 1/8 HSS HS4-1/8-60 HS4-1/8-82 HS4-1/8-90 HS4-1/8-100 HS4-1/8-110 HS4-1/8-120 7.453/16 3/16 HSS HS4-3/16-60 HS4-3/16-82 HS4-3/16-90 HS4-3/16-100 HS4-3/16-110 HS4-3/16-120 7.601/4 1/4 HSS HS4-1/4-60 HS4-1/4-82 HS4-1/4-90 HS4-1/4-100 HS4-1/4-110 HS4-1/4-120 7.90

5/16 1/4 HSS HS4-5/16-60 HS4-5/16-82 HS4-5/16-90 HS4-5/16-100 HS4-5/16-110 HS4-5/16-120 9.163/8 1/4 HSS HS4-3/8-60 HS4-3/8-82 HS4-3/8-90 HS4-3/8-100 HS4-3/8-110 HS4-3/8-120 10.201/2 3/8 HSS HS4-1/2-60 HS4-1/2-82 HS4-1/2-90 HS4-1/2-100 HS4-1/2-110 HS4-1/2-120 12.805/8 3/8 HSS HS4-5/8-60 HS4-5/8-82 HS4-5/8-90 HS4-5/8-100 HS4-5/8-110 HS4-5/8-120 18.203/4 1/2 HSS HS4-3/4-60 HS4-3/4-82 HS4-3/4-90 HS4-3/4-100 HS4-3/4-110 HS4-3/4-120 24.507/8 1/2 HSS HS4-7/8-60 HS4-7/8-82 HS4-7/8-90 HS4-7/8-100 HS4-7/8-110 HS4-7/8-120 32.501 1/2 HSS HS4-1-60 HS4-1-82 HS4-1-90 HS4-1-100 HS4-1-110 HS4-1-120 37.50

1-1/4 1/2 HSS HS4-1-1/4-60 HS4-1-1/4-82 HS4-1-1/4-90 HS4-1-1/4-100 HS4-1-1/4-110 HS4-1-1/4-120 64.001-1/2 3/4 HSS HS4-1-1/2-60 HS4-1-1/2-82 HS4-1-1/2-90 HS4-1-1/2-100 HS4-1-1/2-110 HS4-1-1/2-120 86.00

2 3/4 HSS HS4-2-60 HS4-2-82 HS4-2-90 HS4-2-100 HS4-2-110 HS4-2-120 156.002-1/2 3/4 HSS HS4-2-1/2-60 HS4-2-1/2-82 HS4-2-1/2-90 HS4-2-1/2-100 NA HS4-2-1/2-120 355.00

3 3/4 HSS HS4-3-60 HS4-3-82 HS4-3-90 HS4-3-100 NA HS4-3-120 440.00

4 FLUTE COUNTERSINKS - HSSSINGLE END* 2 + 2 staggered flute design for smooth, chatter-free cutting.* Abundant chip clearance to work well in non-ferrous applications such as aluminum and plastic.* Made from HSS material. Also available in solid carbide.

4 FLUTE COUNTERSINKS - HSSDOUBLE END* 2 cutting edges give you twice the tool life of a single end tool.* Made from HSS. Also available in solid carbide.

BODY DIA.

SHANK DIA.




5/16 5/16 HSS DHS4-5/16-60 DHS4-5/16-82 DHS4-5/16-90 DHS4-5/16-100 DHS4-5/16-110 DHS4-5/16-120 14.433/8 3/8 HSS DHS4-3/8-60 DHS4-3/8-82 DHS4-3/8-90 DHS4-3/8-100 DHS4-3/8-110 DHS4-3/8-120 16.071/2 1/2 HSS DHS4-1/2-60 DHS4-1/2-82 DHS4-1/2-90 DHS4-1/2-100 DHS4-1/2-110 DHS4-1/2-120 20.165/8 5/8 HSS DHS4-5/8-60 DHS4-5/8-82 DHS4-5/8-90 DHS4-5/8-100 DHS4-5/8-110 DHS4-5/8-120 28.673/4 3/4 HSS DHS4-3/4-60 DHS4-3/4-82 DHS4-3/4-90 DHS4-3/4-100 DHS4-3/4-110 DHS4-3/4-120 39.90

CO

UN

TE

RS

INK

S


Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 109

4 FLUTE COUNTERSINKS - CARBIDESINGLE END* For highly abrasive and hard to machine materials.* For production applications in cast iron, alloy steel, or glass reinforced plastics.* Carbide eliminates the high cost of tool changes in production situations.* Rigid set up is a must - not suited for hand held applications.* Tools 3/8” and over have solid carbide heads on hardened steel shanks.

BODY DIA.

SHANK DIA.


PRICE1/8 1/8 CARBIDE C4-1/8-60 C4-1/8-82 C4-1/8-90 C4-1/8-100 C4-1/8-110 C4-1/8-120 10.001/4 1/4 CARBIDE C4-1/4-60 C4-1/4-82 C4-1/4-90 C4-1/4-100 C4-1/4-110 C4-1/4-120 15.403/8 1/4 CARBIDE C4-3/8-60 C4-3/8-82 C4-3/8-90 C4-3/8-100 C4-3/8-110 C4-3/8-120 30.101/2 3/8 CARBIDE C4-1/2-60 C4-1/2-82 C4-1/2-90 C4-1/2-100 C4-1/2-110 C4-1/2-120 42.005/8 3/8 CARBIDE C4-5/8-60 C4-5/8-82 C4-5/8-90 C4-5/8-100 C4-5/8-110 C4-5/8-120 55.003/4 1/2 CARBIDE C4-3/4-60 C4-3/4-82 C4-3/4-90 C4-3/4-100 C4-3/4-110 C4-3/4-120 78.001 1/2 CARBIDE C4-1-60 C4-1-82 C4-1-90 C4-1-100 C4-1-110 C4-1-120 128.00

4 FLUTE COUNTERSINKS - CARBIDEDOUBLE END* 2 cutting edges give you twice the tool life of a single end tool.* Made from premium submicron grain carbide. Also available in HSS.

BODY DIA.

SHANK DIA.


PRICE1/8 1/8 CARBIDE DC4-1/8-60 DC4-1/8-82 DC4-1/8-90 DC4-1/8-100 DC4-1/8-110 DC4-1/8-120 17.50

3/16 3/16 CARBIDE DC4-3/16-60 DC4-3/16-82 DC4-3/16-90 DC4-3/16-100 DC4-3/16-110 DC4-3/16-120 22.501/4 1/4 CARBIDE DC4-1/4-60 DC4-1/4-82 DC4-1/4-90 DC4-1/4-100 DC4-1/4-110 DC4-1/4-120 28.40

5/16 5/16 CARBIDE DC4-5/16-60 DC4-5/16-82 DC4-5/16-90 DC4-5/16-100 DC4-5/16-110 DC4-5/16-120 45.503/8 3/8 CARBIDE DC4-3/8-60 DC4-3/8-82 DC4-3/8-90 DC4-3/8-100 DC4-3/8-110 DC4-3/8-120 54.001/2 1/2 CARBIDE DC4-1/2-60 DC4-1/2-82 DC4-1/2-90 DC4-1/2-100 DC4-1/2-110 DC4-1/2-120 73.905/8 5/8 CARBIDE DC4-5/8-60 DC4-5/8-82 DC4-5/8-90 DC4-5/8-100 DC4-5/8-110 DC4-5/8-120 98.003/4 3/4 CARBIDE DC4-3/4-60 DC4-3/4-82 DC4-3/4-90 DC4-3/4-100 DC4-3/4-110 DC4-3/4-120 140.00

BODY DIA.

SHANK DIA.


PRICE1/8 1/8 HSS HS6-1/8-60 HS6-1/8-82 HS6-1/8-90 HS6-1/8-100 HS6-1/8-110 HS6-1/8-120 7.45

3/16 3/16 HSS HS6-3/16-60 HS6-3/16-82 HS6-3/16-90 HS6-3/16-100 HS6-3/16-110 HS6-3/16-120 7.601/4 1/4 HSS HS6-1/4-60 HS6-1/4-82 HS6-1/4-90 HS6-1/4-100 HS6-1/4-110 HS6-1/4-120 7.90

5/16 1/4 HSS HS6-5/16-60 HS6-5/16-82 HS6-5/16-90 HS6-5/16-100 HS6-5/16-110 HS6-5/16-120 8.753/8 1/4 HSS HS6-3/8-60 HS6-3/8-82 HS6-3/8-90 HS6-3/8-100 HS6-3/8-110 HS6-3/8-120 9.001/2 3/8 HSS HS6-1/2-60 HS6-1/2-82 HS6-1/2-90 HS6-1/2-100 HS6-1/2-110 HS6-1/2-120 11.005/8 3/8 HSS HS6-5/8-60 HS6-5/8-82 HS6-5/8-90 HS6-5/8-100 HS6-5/8-110 HS6-5/8-120 15.803/4 1/2 HSS HS6-3/4-60 HS6-3/4-82 HS6-3/4-90 HS6-3/4-100 HS6-3/4-110 HS6-3/4-120 21.807/8 1/2 HSS HS6-7/8-60 HS6-7/8-82 HS6-7/8-90 HS6-7/8-100 HS6-7/8-110 HS6-7/8-120 32.501 1/2 HSS HS6-1-60 HS6-1-82 HS6-1-90 HS6-1-100 HS6-1-110 HS6-1-120 35.50

1-1/4 1/2 HSS HS6-1-1/4-60 HS6-1-1/4-82 HS6-1-1/4-90 HS6-1-1/4-100 HS6-1-1/4-110 HS6-1-1/4-120 64.001-1/2 3/4 HSS HS6-1-1/2-60 HS6-1-1/2-82 HS6-1-1/2-90 HS6-1-1/2-100 HS6-1-1/2-110 HS6-1-1/2-120 86.00

2 3/4 HSS HS6-2-60 HS6-2-82 HS6-2-90 HS6-2-100 HS6-2-110 HS6-2-120 156.002-1/2 3/4 HSS HS6-2-1/2-60 HS6-2-1/2-82 HS6-2-1/2-90 NA NA NA 355.00

3 3/4 HSS HS6-3-60 HS6-3-82 HS6-3-90 NA NA NA 440.00

6 FLUTE COUNTERSINKS - HSSSINGLE END* Flutes are staggered to ensure smoother, chatter-free cutting action.* Black oxide surface treatment enhances tool life and prevents galling.* Made from HSS material. Also available in M42 8% cobalt and solid carbide.

CO

UN

TE

RS

INK

S


110 Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230

6 FLUTE COUNTERSINKS - HSSDOUBLE END* 2 cutting edges give you twice the tool life of a single end tool.* Made from HSS. Also available in solid carbide.

BODY DIA.

SHANK DIA.




5/16 5/16 HSS DHS6-5/16-60 DHS6-5/16-82 DHS6-5/16-90 DHS6-5/16-100 DHS6-5/16-110 DHS6-5/16-120 14.433/8 3/8 HSS DHS6-3/8-60 DHS6-3/8-82 DHS6-3/8-90 DHS6-3/8-100 NA DHS6-3/8-120 16.071/2 1/2 HSS DHS6-1/2-60 DHS6-1/2-82 DHS6-1/2-90 DHS6-1/2-100 NA DHS6-1/2-120 20.165/8 5/8 HSS DHS6-5/8-60 DHS6-5/8-82 DHS6-5/8-90 DHS6-5/8-100 NA DHS6-5/8-120 28.673/4 3/4 HSS DHS6-3/4-60 DHS6-3/4-82 DHS6-3/4-90 DHS6-3/4-100 NA DHS6-3/4-120 39.90

BODY DIA.

SHANK DIA.


PRICE1/8 1/8 M42 HSP6-1/8-60T HSP6-1/8-82T HSP6-1/8-90T HSP6-1/8-100T HSP6-1/8-110T HSP6-1/8-120T 10.36

3/16 3/16 M42 HSP6-3/16-60T HSP6-3/16-82T HSP6-3/16-90T HSP6-3/16-100T HSP6-3/16-110T HSP6-3/16-120T 10.951/4 1/4 M42 HSP6-1/4-60T HSP6-1/4-82T HSP6-1/4-90T HSP6-1/4-100T HSP6-1/4-110T HSP6-1/4-120T 11.73

5/16 1/4 M42 HSP6-5/16-60T HSP6-5/16-82T HSP6-5/16-90T HSP6-5/16-100T HSP6-5/16-110T HSP6-5/16-120T 13.703/8 1/4 M42 HSP6-3/8-60T HSP6-3/8-82T HSP6-3/8-90T HSP6-3/8-100T HSP6-3/8-110T HSP6-3/8-120T 15.001/2 3/8 M42 HSP6-1/2-60T HSP6-1/2-82T HSP6-1/2-90T HSP6-1/2-100T HSP6-1/2-110T HSP6-1/2-120T 20.255/8 3/8 M42 HSP6-5/8-60T HSP6-5/8-82T HSP6-5/8-90T HSP6-5/8-100T HSP6-5/8-110T HSP6-5/8-120T 28.003/4 1/2 M42 HSP6-3/4-60T HSP6-3/4-82T HSP6-3/4-90T HSP6-3/4-100T HSP6-3/4-110T HSP6-3/4-120T 37.087/8 1/2 M42 HSP6-7/8-60T HSP6-7/8-82T HSP6-7/8-90T HSP6-7/8-100T HSP6-7/8-110T HSP6-7/8-120T 50.081 1/2 M42 HSP6-1-60T HSP6-1-82T HSP6-1-90T HSP6-1-100T HSP6-1-110T HSP6-1-120T 56.53

1-1/4 1/2 M42 HSP6-1-1/4-60T HSP6-1-1/4-82T HSP6-1-1/4-90T NA NA NA 90.65

6 FLUTE COUNTERSINKS - M42 8% COBALT SINGLE END, TiN COATED* Excellent for countersinking abrasive, high-strength, heat resistant, exotic, and other difficult to machine materials.* Tin coated for higher surface hardness and better lubricity.* Coating can also help to enhance productivity and extend tool life.* Made from M42 8% cobalt material. Also available in HSS.

BODY DIA.

SHANK DIA.


PRICE1/8 1/8 CARBIDE C6-1/8-60 C6-1/8-82 C6-1/8-90 C6-1/8-100 C6-1/8-120 10.00

3/16 3/16 CARBIDE C6-3/16-60 C6-3/16-82 C6-3/16-90 C6-3/16-100 C6-3/16-120 12.801/4 1/4 CARBIDE C6-1/4-60 C6-1/4-82 C6-1/4-90 C6-1/4-100 C6-1/4-120 15.40

5/16 1/4 CARBIDE C6-5/16-60 C6-5/16-82 C6-5/16-90 C6-5/16-100 C6-5/16-120 23.803/8 1/4 CARBIDE C6-3/8-60 C6-3/8-82 C6-3/8-90 C6-3/8-100 C6-3/8-120 30.101/2 3/8 CARBIDE C6-1/2-60 C6-1/2-82 C6-1/2-90 C6-1/2-100 C6-1/2-120 42.005/8 3/8 CARBIDE C6-5/8-60 C6-5/8-82 C6-5/8-90 C6-5/8-100 C6-5/8-120 55.003/4 1/2 CARBIDE C6-3/4-60 C6-3/4-82 C6-3/4-90 C6-3/4-100 C6-3/4-120 78.001 1/2 CARBIDE C6-1-60 C6-1-82 C6-1-90 C6-1-100 C6-1-120 128.00

1-1/4 3/4 CARBIDE C6-1-1/4-60 C6-1-1/4-82 C6-1-1/4-90 NA NA 172.00

6 FLUTE COUNTERSINKS - CARBIDESINGLE END* For highly abrasive and hard to machine materials.* For production applications in cast iron, alloy steel, or glass reinforced plastics.* Carbide eliminates the high cost of tool changes in production situations.* Rigid set up is a must - not suited for hand held applications.* Tools 3/8” and over have solid carbide heads on hardened steel shanks.

CO

UN

TE

RS

INK

S


TiN

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 111

6 FLUTE COUNTERSINKS - CARBIDEDOUBLE END* 2 cutting edges give you twice the tool life of a single end tool.* Made from premium submicron grain carbide. Also available in HSS.

BODY DIA.

SHANK DIA.


PRICE1/8 1/8 CARBIDE DC6-1/8-60 DC6-1/8-82 DC6-1/8-90 DC6-1/8-100 NA DC6-1/8-120 17.50

3/16 3/16 CARBIDE DC6-3/16-60 DC6-3/16-82 DC6-3/16-90 DC6-3/16-100 NA DC6-3/16-120 22.501/4 1/4 CARBIDE DC6-1/4-60 DC6-1/4-82 DC6-1/4-90 DC6-1/4-100 DC6-1/4-110 DC6-1/4-120 28.40

5/16 5/16 CARBIDE DC6-5/16-60 DC6-5/16-82 DC6-5/16-90 DC6-5/16-100 NA DC6-5/16-120 45.503/8 3/8 CARBIDE DC6-3/8-60 DC6-3/8-82 DC6-3/8-90 DC6-3/8-100 NA DC6-3/8-120 54.001/2 1/2 CARBIDE DC6-1/2-60 DC6-1/2-82 DC6-1/2-90 DC6-1/2-100 NA DC6-1/2-120 73.905/8 5/8 CARBIDE DC6-5/8-60 DC6-5/8-82 DC6-5/8-90 DC6-5/8-100 NA DC6-5/8-120 98.003/4 3/4 CARBIDE DC6-3/4-60 DC6-3/4-82 DC6-3/4-90 DC6-3/4-100 NA DC6-3/4-120 140.00

6 FLUTE CNC PRECISION COUNTERSINKS - HSSSINGLE END* Use on CNC and preset machines.* Tight dimensions on length and angle insure setting accuracy and repeatability.* Made from HSS. Also available in solid carbide. * Pre-setting information available on page 117.

BODY DIA.

SHANK DIA.


PRICE3/16 3/16 HSS HS6NC-3/16-60 HS6NC-3/16-82 HS6NC-3/16-90 HS6NC-3/16-100 HS6NC-3/16-110 HS6NC-3/16-120 9.601/4 1/4 HSS HS6NC-1/4-60 HS6NC-1/4-82 HS6NC-1/4-90 HS6NC-1/4-100 HS6NC-1/4-110 HS6NC-1/4-120 9.80

5/16 1/4 HSS HS6NC-5/16-60 HS6NC-5/16-82 HS6NC-5/16-90 HS6NC-5/16-100 HS6NC-5/16-110 HS6NC-5/16-120 11.203/8 1/4 HSS HS6NC-3/8-60 HS6NC-3/8-82 HS6NC-3/8-90 HS6NC-3/8-100 HS6NC-3/8-110 HS6NC-3/8-120 12.401/2 3/8 HSS HS6NC-1/2-60 HS6NC-1/2-82 HS6NC-1/2-90 HS6NC-1/2-100 HS6NC-1/2-110 HS6NC-1/2-120 15.805/8 3/8 HSS HS6NC-5/8-60 HS6NC-5/8-82 HS6NC-5/8-90 HS6NC-5/8-100 HS6NC-5/8-110 HS6NC-5/8-120 22.903/4 1/2 HSS HS6NC-3/4-60 HS6NC-3/4-82 HS6NC-3/4-90 HS6NC-3/4-100 HS6NC-3/4-110 HS6NC-3/4-120 31.807/8 1/2 HSS HS6NC-7/8-60 HS6NC-7/8-82 HS6NC-7/8-90 HS6NC-7/8-100 HS6NC-7/8-110 HS6NC-7/8-120 43.601 1/2 HSS HS6NC-1-60 HS6NC-1-82 HS6NC-1-90 HS6NC-1-100 HS6NC-1-110 HS6NC-1-120 48.56

6 FLUTE CNC PRECISION COUNTERSINKS - CARBIDESINGLE END* Use on CNC and preset machines.* Tight dimensions on length and angle insure setting accuracy and repeatability.* Made from premium submicron grain carbide. Also available in HSS.* Pre-setting information available on page 117.

BODY DIA.

SHANK DIA.


PRICE1/4 1/4 CARBIDE C6NC-1/4-60 C6NC-1/4-82 C6NC-1/4-90 C6NC-1/4-100 C6NC-1/4-110 C6NC-1/4-120 20.603/8 1/4 CARBIDE C6NC-3/8-60 C6NC-3/8-82 C6NC-3/8-90 C6NC-3/8-100 C6NC-3/8-110 C6NC-3/8-120 37.101/2 3/8 CARBIDE C6NC-1/2-60 C6NC-1/2-82 C6NC-1/2-90 C6NC-1/2-100 C6NC-1/2-110 C6NC-1/2-120 50.205/8 3/8 CARBIDE C6NC-5/8-60 C6NC-5/8-82 C6NC-5/8-90 C6NC-5/8-100 C6NC-5/8-110 C6NC-5/8-120 71.123/4 1/2 CARBIDE C6NC-3/4-60 C6NC-3/4-82 C6NC-3/4-90 C6NC-3/4-100 C6NC-3/4-110 C6NC-3/4-120 95.801 1/2 CARBIDE C6NC-1-60 C6NC-1-82 C6NC-1-90 C6NC-1-100 C6NC-1-110 C6NC-1-120 159.00

CO

UN

TE

RS

INK

S

CENTER REAMER - HSS3 AND 4 FLUTE, SINGLE END* Used for countersinking holes for centers or enlarging existing holes.* Radial relief on the angle contributes to smooth, chatter-free operation.* Made from HSS.

BODY DIA.

SHANK DIA. FLUTES MATERIAL

GRADE 60 82 90 100 LIST PRICE

1/4 1/4 3 HSS HSCR-1/4-60 HSCR-1/4-82 HSCR-1/4-90 HSCR-1/4-100 7.903/8 1/4 3 HSS HSCR-3/8-60 HSCR-3/8-82 HSCR-3/8-90 HSCR-3/8-100 10.201/2 3/8 3 HSS HSCR-1/2-60 HSCR-1/2-82 HSCR-1/2-90 HSCR-1/2-100 12.805/8 3/8 3 HSS HSCR-5/8-60 HSCR-5/8-82 HSCR-5/8-90 HSCR-5/8-100 18.203/4 1/2 3 HSS HSCR-3/4-60 HSCR-3/4-82 HSCR-3/4-90 HSCR-3/4-100 24.501 1/2 3 HSS HSCR-1-60 HSCR-1-82 HSCR-1-90 NA 37.50

1-1/4 1/2 4 HSS HSCR-1-1/4-60 HSCR-1-1/4-82 HSCR-1-1/4-90 NA 64.001-1/2 3/4 4 HSS HSCR-1-1/2-60 HSCR-1-1/2-82 HSCR-1-1/2-90 NA 86.001-3/4 3/4 4 HSS HSCR-1-3/4-60 HSCR-1-3/4-82 HSCR-1-3/4-90 NA 138.00

2 3/4 4 HSS HSCR-2-60 HSCR-2-82 HSCR-2-90 NA 156.00


112 Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230

DRILL POINT COUNTERSINKS - HSS4 FLUTE, SINGLE END* Drill and countersink with one tool.* A thin web drill point is blended into 2 flutes of a 4 flute countersink to spot drill and countersink in one operation.* Can save setup and production time by combining two operations into one.* Made from HSS.

BODY DIA.

SHANK DIA.


PRICE1/8 1/8 HSS HS4DP-1/8-60 HS4DP-1/8-82 HS4DP-1/8-90 HS4DP-1/8-100 HS4DP-1/8-110 HS4DP-1/8-120 10.00

3/16 3/16 HSS HS4DP-3/16-60 HS4DP-3/16-82 HS4DP-3/16-90 HS4DP-3/16-100 HS4DP-3/16-110 HS4DP-3/16-120 10.601/4 1/4 HSS HS4DP-1/4-60 HS4DP-1/4-82 HS4DP-1/4-90 HS4DP-1/4-100 HS4DP-1/4-110 HS4DP-1/4-120 11.16

5/16 1/4 HSS HS4DP-5/16-60 HS4DP-5/16-82 HS4DP-5/16-90 HS4DP-5/16-100 HS4DP-5/16-110 HS4DP-5/16-120 13.083/8 1/4 HSS HS4DP-3/8-60 HS4DP-3/8-82 HS4DP-3/8-90 HS4DP-3/8-100 HS4DP-3/8-110 HS4DP-3/8-120 15.301/2 3/8 HSS HS4DP-1/2-60 HS4DP-1/2-82 HS4DP-1/2-90 HS4DP-1/2-100 HS4DP-1/2-110 HS4DP-1/2-120 19.625/8 3/8 HSS HS4DP-5/8-60 HS4DP-5/8-82 HS4DP-5/8-90 HS4DP-5/8-100 HS4DP-5/8-110 HS4DP-5/8-120 27.723/4 1/2 HSS HS4DP-3/4-60 HS4DP-3/4-82 HS4DP-3/4-90 HS4DP-3/4-100 HS4DP-3/4-110 HS4DP-3/4-120 37.327/8 1/2 HSS HS4DP-7/8-60 HS4DP-7/8-82 HS4DP-7/8-90 HS4DP-7/8-100 HS4DP-7/8-110 HS4DP-7/8-120 46.861 1/2 HSS HS4DP-1-60 HS4DP-1-82 HS4DP-1-90 HS4DP-1-100 HS4DP-1-110 HS4DP-1-120 57.36

DRILL POINT COUNTERSINKS - HSS4 FLUTE, DOUBLE END* 2 cutting edges give you twice the tool life of a single end tool.* Drill and countersink with one tool.* A thin web drill point is blended into 2 flutes of a 4 flute countersink to spot drill and countersink in one operation.* Made from HSS. Also available in solid carbide.

BODY DIA.

SHANK DIA.


PRICE1/8 1/8 HSS DHS4DP-1/8-60 DHS4DP-1/8-82 DHS4DP-1/8-90 DHS4DP-1/8-100 DHS4DP-1/8-110 DHS4DP-1/8-120 15.00

3/16 3/16 HSS DHS4DP-3/16-60 DHS4DP-3/16-82 DHS4DP-3/16-90 DHS4DP-3/16-100 DHS4DP-3/16-110 DHS4DP-3/16-120 15.901/4 1/4 HSS DHS4DP-1/4-60 DHS4DP-1/4-82 DHS4DP-1/4-90 DHS4DP-1/4-100 DHS4DP-1/4-110 DHS4DP-1/4-120 16.74

5/16 5/16 HSS DHS4DP-5/16-60 DHS4DP-5/16-82 DHS4DP-5/16-90 DHS4DP-5/16-100 DHS4DP-5/16-110 DHS4DP-5/16-120 19.623/8 3/8 HSS DHS4DP-3/8-60 DHS4DP-3/8-82 DHS4DP-3/8-90 DHS4DP-3/8-100 DHS4DP-3/8-110 DHS4DP-3/8-120 22.951/2 1/2 HSS DHS4DP-1/2-60 DHS4DP-1/2-82 DHS4DP-1/2-90 DHS4DP-1/2-100 DHS4DP-1/2-110 DHS4DP-1/2-120 29.435/8 5/8 HSS DHS4DP-5/8-60 DHS4DP-5/8-82 DHS4DP-5/8-90 DHS4DP-5/8-100 DHS4DP-5/8-110 DHS4DP-5/8-120 41.583/4 3/4 HSS DHS4DP-3/4-60 DHS4DP-3/4-82 DHS4DP-3/4-90 DHS4DP-3/4-100 DHS4DP-3/4-110 DHS4DP-3/4-120 55.98

DRILL POINT COUNTERSINKS - CARBIDE4 FLUTE, DOUBLE END* 2 cutting edges give you twice the tool life of a single end tool.* Drill and countersink with one tool.* Can save setup and production time by combining two operations into one.* Made from premium submicron grain carbide. Also available in HSS.

BODY DIA.

SHANK DIA.


PRICE1/8 1/8 CARBIDE DC4DP-1/8-60 DC4DP-1/8-82 DC4DP-1/8-90 DC4DP-1/8-100 DC4DP-1/8-110 DC4DP-1/8-120 22.18

3/16 3/16 CARBIDE DC4DP-3/16-60 DC4DP-3/16-82 DC4DP-3/16-90 DC4DP-3/16-100 DC4DP-3/16-110 DC4DP-3/16-120 29.201/4 1/4 CARBIDE DC4DP-1/4-60 DC4DP-1/4-82 DC4DP-1/4-90 DC4DP-1/4-100 DC4DP-1/4-110 DC4DP-1/4-120 37.00

5/16 1/4 CARBIDE DC4DP-5/16-60 DC4DP-5/16-82 DC4DP-5/16-90 DC4DP-5/16-100 DC4DP-5/16-110 DC4DP-5/16-120 57.663/8 1/4 CARBIDE DC4DP-3/8-60 DC4DP-3/8-82 DC4DP-3/8-90 DC4DP-3/8-100 DC4DP-3/8-110 DC4DP-3/8-120 69.601/2 3/8 CARBIDE DC4DP-1/2-60 DC4DP-1/2-82 DC4DP-1/2-90 DC4DP-1/2-100 DC4DP-1/2-110 DC4DP-1/2-120 92.405/8 3/8 CARBIDE DC4DP-5/8-60 DC4DP-5/8-82 DC4DP-5/8-90 DC4DP-5/8-100 DC4DP-5/8-110 DC4DP-5/8-120 129.603/4 1/2 CARBIDE DC4DP-3/4-60 DC4DP-3/4-82 DC4DP-3/4-90 DC4DP-3/4-100 DC4DP-3/4-110 DC4DP-3/4-120 173.28

CO

UN

TE

RS

INK

S


Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 113

BODY DIA.

SHANK DIA.

MATERIAL GRADE 60 82 90 LIST

PRICE1/2 1/2 HSS HSMC-1/2-60 HSMC-1/2-82 NA 15.605/8 1/2 HSS HSMC-5/8-60 HSMC-5/8-82 NA 22.703/4 1/2 HSS HSMC-3/4-60 HSMC-3/4-82 NA 31.207/8 1/2 HSS HSMC-7/8-60 HSMC-7/8-82 NA 42.801 1/2 HSS HSMC-1-60 HSMC-1-82 HSMC-1-90 47.70

MACHINE COUNTERSINKS - HSS4 FLUTE, SINGLE END* Made with radial clearance and have added shank length for use in turret lathes and for screw machine work.* Made from HSS.

CO

UN

TE

RS

INK

S

COMBINED DRILL AND COUNTERSINK - HSS4 FLUTE, SINGLE END* For centering and spot drilling applications when high accuracy is necessary.* 60° included angle* Made from HSS. Also available in solid carbide.

ORDERING NOTE: These tools are sold only in package quantities. Sizes 00-6 are sold in packages of 12 tools. Sizes 7 and 8 are sold in packages of 6 tools.

SIZE DRILL DIA.

BODY DIA.

MATERIAL GRADE TOOL NAME LIST PRICE

EACH TOOL00 0.025 1/8 HSS HSCD-00 5.220 0.031 1/8 HSS HSCD-0 5.221 3/64 1/8 HSS HSCD-1 3.902 5/64 3/16 HSS HSCD-2 4.123 7/64 1/4 HSS HSCD-3 4.304 1/8 5/16 HSS HSCD-4 4.485 3/16 7/16 HSS HSCD-5 7.486 7/32 1/2 HSS HSCD-6 11.507 1/4 5/8 HSS HSCD-7 21.358 5/16 3/4 HSS HSCD-8 27.75

COMBINED DRILL AND COUNTERSINK - CARBIDE4 FLUTE, SINGLE END* For centering and spot drilling applications when high accuracy is necessary.* 60° included angle* Use carbide for highly abrasive or tough materials in production runs.

SIZE DRILL DIA.

BODY DIA.

MATERIAL GRADE TOOL NAME LIST

PRICE00 0.025 1/8 CARBIDE KDR-00 13.500 0.031 1/8 CARBIDE KDR-0 12.651 3/64 1/8 CARBIDE KDR-1 10.372 5/64 3/16 CARBIDE KDR-2 16.433 7/64 1/4 CARBIDE KDR-3 19.614 1/8 5/16 CARBIDE KDR-4 26.885 3/16 7/16 CARBIDE KDR-5 40.726 7/32 1/2 CARBIDE KDR-6 55.577 1/4 5/8 CARBIDE KDR-7 108.218 5/16 3/4 CARBIDE KDR-8 143.35


114

Note: All speed and feed data are suggested starting points. They may be increased or de-creased depending on machine condition, hole depth, finish required, coolant, etc. If drill depth exceeds 3 diameters, reduce speed and feed for carbide drills.

CARBIDE END MILLSSpeed and Feed Data - Applications in Various Materials

CARBIDE DRILLSSpeed and Feed Data - Applications in Various Materials

Chip Load per ToothMaterial SFM 1/8" 1/4" 1/2" 1"

Aluminum Alloys 600-1200 .0010 .0020 .0040 .0080Brass 200-350 .0010 .0020 .0030 .0050Bronze 200-350 .0010 .0020 .0030 .0050Carbon Steel 100-600 .0010 .0015 .0030 .0060Cast Iron 80-350 .0010 .0015 .0030 .0060Cast Steel 200-350 .0005 .0010 .0020 .0040Cobalt Base Alloys 20-80 .0005 .0008 .0010 .0020Copper 350-900 .0010 .0020 .0030 .0060Die Steel 50-300 .0005 .0010 .0020 .0040Graphite 600-1000 .0020 .0050 .0080 .0100Inconel/Monel 30-50 .0005 .0010 .0015 .0030Magnesium 900-1300 .0010 .0020 .0040 .0080Malleable Iron 200-500 .0005 .0010 .0030 .0070Nickel Base Alloys 50-100 .0002 .0008 .0010 .0020Plastic 600-1200 .0010 .0030 .0060 .0100Stainless Steel - Free Machining 100-300 .0005 .0010 .0020 .0030Stainless Steel - Other 50-250 .0005 .0010 .0020 .0030Steel - Annealed 100-350 .0010 .0020 .0030 .0050Steel - Rc 18-24 100-500 .0004 .0008 .0015 .0045Steel - Rc 25-37 25-120 .0003 .0005 .0010 .0030Titanium 100-200 .0005 .0008 .0015 .0030

Feed Rate (IPR)Material SFM 1/16" 1/8" 1/4" 1/2"

Aluminum Alloys 150-400 .0010 .0050 .0030 .0050Brass & Bronze 100-300 .0005 .0010 .0020 .0040Low Carbon Steel 85-150 .0005 .0010 .0020 .0040Cast Iron 100-300 .0010 .0020 .0030 .0050Hardened Steel RC-50 30-90 .0005 .0010 .0020 .0030Copper 150-400 .0010 .0030 .0050 .0060Die Steel 50-250 .0005 .0005 .0020 .0040Inconel/Monel 30-90 .0005 .0005 .0010 .0015Magnesium 200-650 .0015 .0030 .0050 .0080Malleable Iron 80-250 .0010 .0020 .0030 .0050Nickel Base Alloys 30-90 .0005 .0006 .0010 .0015Plastic 250-600 .0015 .0030 .0040 .0060Stainless Steel - Soft 50-150 .0005 .0005 .0020 .0040Stainless Steel - Hard 30-90 .0005 .0005 .0010 .0015Titanium - Soft 60-200 .0005 .0020 .0040 .0050Titanium - Hard 45-200 .0005 .0008 .0020 .0040

TE

CH

NIC

AL

DAT

A

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 115

TE

CH

NIC

AL D

ATA

Chip Load per ToothMaterial SFM 1/8" 1/4" 1/2" 1"

Aluminum Alloys 1200 .0010 .0020 .0040 .0080Carbon Steel 300-600 .0010 .0015 .0030 .0060Cast Iron 350-550 .0010 .0015 .0030 .0060Copper Alloys 500-900 .0010 .0020 .0030 .0060Steel - Annealed 350-500 .0010 .0020 .0030 .0050Steel - Rc 18-24 150-500 .0004 .0008 .0015 .0045Steel - Rc 25-37 125-200 .0003 .0005 .0010 .0030Stainless Steel - Free Machining 250-400 .0005 .0010 .0020 .0030Stainless Steel - Other 150-300 .0005 .0010 .0020 .0030Inconel/Monel 60-100 .0005 .0010 .0015 .0030Titanium 175-300 .0005 .0008 .0015 .0030

All speeds and feeds are suggested starting points. They may be increased or decreased depending on machine condition, depth of cut, finish required, coolant, etc.

ROUGHING END MILLSSpeed and Feed Data

Chip Load per ToothMaterial SFM 1/8” 1/4” 1/2” 1”

Aluminum Alloys 125-250 .0010 .0020 .0025 .0030Magnesium 125-250 .0010 .0020 .0025 .0030Copper 75-100 .0008 .0015 .0030 .0060Brass 85-110 .0008 .0015 .0030 .0060Bronze 75-100 .0008 .0015 .0030 .0060Cast Iron 100-125 .0008 .0015 .0025 .0050Cast Steel 75-100 .0008 .0015 .0025 .0050Malleable Iron 80-120 .0008 .0015 .0025 .0050Stainless Steel

Free Machining 75-90 .0005 .0007 .0012 .0020Other 50-75 .0005 .0007 .0012 .0020

SteelAnnealed 100-125 .0010 .0020 .0040 .0060Rc 18-24 75-100 .0070 .0012 .0030 .0050Rc 25-37 40-75 .0005 .0010 .0020 .0040

TitaniumUp to Rc 30 40-75 .0005 .0012 .0025 .0050

Rc 30+ 20-25 .0005 .0010 .0020 .0035High Temp Alloys

Austenitic 12-20 * .0007 .0015 .0030Ferritic 50-75 .0004 .0007 .0020 .0050

Nickel Base 20-25 .0004 .0007 .0015 .0030Cobalt Base 8-15 * .0007 .0015 .0030

LIST OF SYMBOLS

F = NUMBER OF FLUTESD = DIAMETER OF CUTTER

R.P.M. = REVOLUTIONS PER MINUTES.F.M. = SURFACE FEET PER MINUTEI.P.M. = FEED RATE: INCHES PER MINUTEI.P.R. = FEED RATE: INCHES PER REVOLUTION

MACHINING FORMULAS

S.F.M. = 0.262 x D x R.P.M.

R.P.M. = 3.82 x S.F.M.D

I.P.R. = I.P.M. or CHIP LOAD x FR.P.M.

I.P.M. = R.P.M. x I.P.R.

CHIP LOAD = I.P.M. or I.P.R. R.P.M. x F F

MVH - VARIABLE HELIX END MILLSSpeed and Feed Data

116

Not

e: A

ll sp

eed

and

feed

dat

a ar

e su

gges

ted

star

ting

poin

ts.

They

may

be

incr

ease

d or

de

crea

sed

depe

ndin

g on

mac

hine

con

ditio

n, d

epth

of c

ut, fi

nish

requ

ired,

coo

lant

, etc

.

COBALT HSS AND HSS END MILLSSpeed and Feed Data - Applications in Various Materials

HEAT

-RES

ISTA

NT N

ICKE

LHI

GH S

TREN

GTH

HEAT

RES

ISTA

NTHE

AT-R

ESIS

TANT

HEAT

-RES

ISTA

NTBA

SE A

LLOY

S, H

IGH

STAI

NLES

S ST

EELS

, HIG

HFE

RRIT

IC B

ASE

ALLO

YSMA

CHIN

E ST

EEL,

HAR

DCA

ST IR

ON,

BRAS

S, B

RONZ

E,AL

UMIN

UM,

MATE

RIAL

COBA

LT B

ASE

ALLO

YS.

AUST

ENIT

IC A

LLOY

S,ST

RENG

TH S

TAIN

LESS

TENS

ILE

STEE

LSME

DIUM

STR

ENGT

HBR

ASS

AND

BRON

ZE,

MILD

STE

EL,

ALLO

YED

ALUM

INUM

, PL

ASTI

CS, W

OOD

HIGH

TEN

SILE

STE

ELS

HIGH

TEN

SILE

STE

ELS

STEE

LS, H

IGH

(40-

60 C

)ST

AINL

ESS

STEE

LSEL

ECTR

OLYT

IC C

OPPE

RHA

LF-H

ARD

BRAS

SAB

RASI

VE P

LAST

ICS

(50-

55 C

)(4

6-50

C)

STRE

NGTH

TITA

NIUM

MEDI

UM S

TREN

GTH

UNAL

LOYE

D TI

TANI

UMMI

LD S

TEEL

FOR

GING

SAN

D BR

ONZE

ALLO

YSTI

TANI

UM A

LLOY

STO

OL S

TEEL

S (3

0-40

C)

(20-

30 C

)SP

EED

SPEE

DSP

EED

SPEE

DSP

EED

SPEE

DSP

EED

SPEE

DSP

EED

5-10

SFM

FEED

10-1

5 SFM

FEED

15-2

0 SFM

FEED

20-4

0 SFM

FEED

40-6

0 SFM

FEED

60-8

0 SFM

FEED

80-1

00 S

FMFE

ED10

0-20

0 SFM

FEED

200-

600 S

FMFE

EDDI

A. O

FCH

IP L

OAD

CHIP

LEA

DCH

IP L

EAD

CHIP

LEA

DCH

IP L

EAD

CHIP

LEA

D CH

IP L

EAD

CHIP

LEA

DCH

IP L

EAD

END

MILL

SRP

MPE

R TO

OTH

RPM

PER

TOOT

HRP

MPE

R TO

OTH

RPM

PER

TOOT

HRP

MPE

R TO

OTH

RPM

PER

TOOT

HRP

MPE

R TO

OTH

RPM

PER

TOOT

HRP

MPE

R TO

OTH

1/16

- -

- -

- -

1222

-244

4.00

02-.0

005

2444

-366

7.00

02 -.

005

3667

-488

8.00

02 -.

0005

4888

-611

1.00

02 -.

0005

6111

-122

22.00

02 -.

0005

1222

2 UP

.0002

-.00

053/3

2 -

- -

-61

1-81

5.00

02 -.

0005

815-

1629

.0002

-.000

516

29-2

750

.0002

-.00

527

50-3

259

.0002

-.00

0532

59-4

073

.0002

-.00

0540

73-8

146

.0002

-.00

0581

46 U

P.00

02 -.

0005

1/8 -

- -

-45

6-61

1.00

02 -.

0005

611-

1222

.0002

-.000

512

22-1

833

.0002

-.00

518

33-2

440

.0002

-.00

124

40-3

056

.0002

-.00

130

56-6

112

.0002

-.00

161

12 U

P.00

02 -.

001

3/16

- -

204-

306

.0002

-.00

0530

6-40

7.00

02 -.

0005

407-

815

.0002

-.000

581

5-12

22.00

02 -.

005

1222

-162

5.00

02 -.

001

1625

-203

7.00

02 -.

001

2037

-407

4.00

02 -.

001

4074

-122

22.00

02 -.

001

1/476

-153

.0002

-.00

115

3-23

0.00

02 -.

001

229-

306

.0002

-.00

130

6-61

1.00

02 -.

001

611-

917

.0002

-.00

191

7-12

22.00

05 -.

002

1222

-152

8.00

05 -.

002

1528

-305

6.00

05 -.

002

3056

-916

8.00

05 -.

002

5/16

61-1

22.00

02 -.

001

122-

183

.0002

-.00

118

3-24

4.00

02 -.

001

244-

489

.0002

-.00

148

9-73

3.00

02 -.

001

733-

978

.0005

-.00

297

8-12

22.00

05 -.

002

1222

-244

4.00

05 -.

002

2444

-733

2.00

05 -.

002

3/851

-102

.0002

-.00

110

2-15

3.00

02 -.

001

153-

203

.0002

-.00

120

3-40

7.00

05 -.

002

406-

611

.0005

-.00

261

1-81

5.00

1 -.00

381

5-10

19.00

1 -.00

310

19-2

038

.0005

-.00

320

38-6

114

.0005

-.00

27/1

644

-88

.0005

-.00

188

-132

.0005

-.00

113

1-17

5.00

05 -.

002

175-

349

.0005

-.00

234

9-52

4.00

05 -.

002

524-

698

.001 -

.003

698-

873

.001 -

.003

873-

1746

.0005

-.00

317

46-5

238

.0005

-.00

21/2

38-7

6.00

05 -.

001

76-11

5.00

05 -.

001

115-

153

.0005

-.00

215

3-30

6.00

05 -.

003

306-

458

.001 -

.003

458-

611

.001 -

.003

611-

764

.001 -

.003

764-

1528

.0005

-.00

315

28-4

584

.0005

-.00

29/1

634

-68

.0005

-.00

268

-104

.0005

-.00

210

4-13

6.00

05 -.

002

136-

272

.0005

-.00

327

2-41

2.00

1 -.00

341

2-54

3.00

1 -.00

454

3-67

8.00

1 -.00

467

8-13

56.00

05 -.

004

1356

-407

1.00

05 -.

003

5/831

-61

.0005

-.00

261

-92

.0005

-.00

292

-122

.0005

-.00

212

2-24

4.00

1 -.00

424

4-36

7.00

1 -.00

436

7-48

9.00

1 -.00

448

9-61

1.00

1 -.00

461

1-12

22.00

05 -.

004

1222

-366

6.00

05 -.

003

11/16

28-5

6.00

05 -.

002

56-8

4.00

05 -.

002

84-11

1.00

05 -.

002

111-

222

.001 -

.004

222-

337

.001 -

.004

337-

444

.001 -

.004

444-

555

.001 -

.004

555-

1110

.0005

-.00

411

10-3

330

.0005

-.00

33/4

26-5

1.00

05 -.

002

51-7

6.00

05 -.

002

76-1

02.00

1 -.00

410

2-20

3.00

1 -.00

420

3-30

6.00

1 -.00

430

6-40

7.00

1 -.00

440

7-50

9.00

2 -.00

650

9-10

18.00

1 -.00

610

18-3

054

.001 -

.004

13/16

24-4

7.00

1 -.00

347

-71

.001 -

.003

71-9

4.00

1 -.00

494

-189

.001 -

.004

189-

284

.001 -

.004

284-

379

.002 -

.006

379-

469

.002 -

.006

469-

938

.001 -

.006

938-

2814

.001 -

.004

7/822

-44

.001 -

.003

44-6

5.00

1 -.00

365

-87

.001 -

.004

87-1

75.00

1 -.00

417

5-26

2.00

2 -.00

626

2-34

9.00

2 -.00

634

9-43

6.00

2 -.00

643

6-87

2.00

1 -.00

687

2-26

16.00

1 -.00

415

/1620

-40

.001 -

.003

40-6

2.00

1 -.00

362

-81

.001 -

.004

81-1

63.00

1 -.00

416

3-24

6.00

2 -.00

624

6-32

6.00

2 -.00

632

6-40

7.00

2 -.00

640

7-81

4.00

1 -.00

651

4-24

42.00

1 -.00

41

19-3

8.00

1 -.00

338

-58

.001 -

.003

58-7

6.00

1 -.00

476

-153

.002 -

.006

153-

229

.002 -

.006

229-

306

.002 -

.006

306-

382

.002 -

.006

382-

764

.002 U

P76

4-22

92.00

2 UP

1 1/8

34.00

15 -.

004

34-5

1.00

15 -.

004

51-6

8.00

15 -.

005

68-1

36.00

2 -.00

613

6-20

4.00

2 -.00

620

4-27

2.00

2 -.00

627

2-34

0.00

3 UP

340-

680

.002 U

P68

0-20

40.00

2 UP

1 1/4

31.00

15 -.

004

31-4

6.00

15 -.

004

46-6

1.00

15 -.

005

61-1

22.00

2 -.00

612

2-18

3.00

2 -.00

618

3-24

4.00

3 UP

244-

306

.003 U

P30

6-61

2.00

2 UP

612-

1836

.002 U

P1 3

/828

.0015

-.00

428

-42

.0015

-.00

442

-55

.0015

-.00

555

-111

.002 -

.006

111-

167

.003 U

P16

7-22

2.00

3 UP

222-

278

.003 U

P27

8-55

6.00

2 UP

556-

1668

.002 U

P1 1

/226

.0015

-.00

426

-38

.0015

-.00

438

-51

.002 U

P51

-102

.003 U

P10

2-15

3.00

3 UP

153-

204

.003 U

P20

4-25

5.00

3 UP

255-

510

.003 U

P51

0-15

30.00

2 UP

1 5/8

24.00

2 UP

35.00

2 UP

35-4

7.00

2 UP

47-9

4.00

3 UP

94-1

41.00

3 UP

141-

188

.003 U

P18

8-23

5.00

3 UP

235-

470

.003 U

P47

0-14

10.00

2 UP

1 3/4

22.00

2 UP

32.00

2 UP

32-4

3.00

2 UP

43-8

7.00

3 UP

87-1

31.00

3 UP

131-

175

.003 U

P17

5-21

8.00

3 UP

218-

436

.003 U

P43

6-13

08.00

2 UP

1 7/8

20.00

2 UP

30.00

2 UP

30-4

0.00

3 UP

40-8

1.00

3 UP

81-1

22.00

3 UP

122-

163

.003 U

P16

3-20

4.00

3 UP

204-

408

.003 U

P40

8-12

24.00

3 UP

219

.002 U

P29

.003 U

P29

-38

.003 U

P38

-76

.003 U

P76

-115

.003 U

P11

5-15

3.00

3 UP

153-

191

.003 U

P19

1-38

2.00

3 UP

382-

1146

.003 U

P2 1

/818

.003 U

P28

.003 U

P36

.003 U

P36

-72

.003 U

P72

-108

.003 U

P10

8-14

4.00

3 UP

144-

179

.003 U

P17

9-35

8.00

3 UP

358-

1074

.003 U

P2 1

/417

.003 U

P26

.003 U

P34

.003 U

P34

-68

.003 U

P68

-102

.003 U

P10

3-13

6.00

3 UP

136-

170

.003 U

P17

0-34

0.00

3 UP

340-

1020

.003 U

P2 3

/816

.003 U

P25

.003 U

P32

.003 U

P32

-64

.003 U

P64

-97

.003 U

P97

-128

.003 U

P12

8-16

1.00

3 UP

161-

322

.003 U

P32

2-96

6.00

3 UP

2 1/2

15.00

3 UP

23.00

3 UP

30.00

3 UP

30-6

1.00

3 UP

61-9

2.00

3 UP

92-1

22.00

3 UP

122-

153

.003 U

P15

3-30

6.00

3 UP

306-

918

.003 U

P2 5

/815

.003 U

P22

.003 U

P29

.003 U

P29

-58

.003 U

P58

-88

.003 U

P88

-116

.003 U

P11

6-14

5.00

3 UP

145-

290

.003 U

P29

0-87

0.00

3 UP

2 3/4

14.00

3 UP

21.00

3 UP

28.00

3 UP

28-5

6.00

3 UP

56-8

3.00

3 UP

83-11

1.00

3 UP

111-

139

.003 U

P13

9-27

8.00

3 UP

278-

834

.003 U

P2 7

/814

.003 U

P20

.003 U

P27

.003 U

P27

-53

.003 U

P53

-80

.003 U

P80

-106

.003 U

P10

6-13

2.00

3 UP

132-

264

.003 U

P26

4-79

2.00

3 UP

313

.003 U

P19

.003 U

P26

.003 U

P26

-51

.003 U

P51

-76

.003 U

P76

-102

.003 U

P10

2-12

7.00

3 UP

127-

154

.003 U

P25

4-76

2.00

3 UP

TE

CH

NIC

AL

DAT

A

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 117

TE

CH

NIC

AL D

ATA

COUNTERSINKSSpeed Data - Applications in Various Materials

COUNTERSINK TYPEHSS M42 8% COBALT WITH TiN CARBIDE

Material SFM SFM SFMAluminum Alloys 150-250 180-300 300-500Brass ( Bronze) 75-125 95-150 150-250Cast Iron 75-125 95-150 125-225Malleable Iron 80-90 100-115 90-150Magnesium 125-250 150-300 250-400Inconel/Monel 30-50 40-65 50-75Plastic 100-250 125-300 250-400Mild Steel 70-100 85-125 80-170Steel - Annealed 40-50 50-65 50-80Steel - Rc 18-24 30-40 40-50 40-60Steel - Rc 25-37 25-35 30-45 35-55Stainless Steel - Free Machining 30-80 40-100 80-125Stainless Steel - Other 15-50 20-65 50-75Titanium 50-60 60-75 60-90

Note: All speeds are suggested starting points. You may have to change either by increas-ing or decreasing speed depending on machine condition, finish required, and/or if coolant is used.

Feed on single flute countersinks should not exceed .005” per revolution on large diameters. Multiple flute countersinks are designed for increased feed rates. A controlled feed rate will result in better surface finish.

All Melin countersinks are manufactured on CNC grinders to insure consistant and accurate flute spacing. Carbide countersinks should be used in rigid tool holders to maximize tool life.

COUNTERSINKSNose Diameter for Pre-setting CNC Precision Countersinks

NC POINT DIA.

SIZE 60° 82° 90° 100° 110° 120°

0.188 0.058 0.032 0.032 0.032 0.032 0.0320.250 0.078 0.046 0.046 0.046 0.046 0.0460.313 0.080 0.047 0.047 0.047 0.047 0.0470.375 0.125 0.078 0.078 0.078 0.062 0.0620.438 0.140 0.096 0.096 0.096 0.070 0.0700.500 0.156 0.109 0.109 0.109 0.078 0.0780.625 0.203 0.125 0.125 0.125 0.109 0.1090.750 0.250 0.156 0.156 0.156 0.125 0.1250.875 0.281 0.172 0.172 0.172 0.140 0.1401.000 0.328 0.203 0.203 0.203 0.171 0.171

Standard coatings are the same price for most of Melin’s tools. To order coated tools, add TiN, TiCN, or AlTiN after the tool name or change the first digit of the EDP to 2 for TN, 4 for TiCN, or 5 for AlTiN.

118

COATING INFORMATION

TiN - Titanium Nitride Hardness - 2900HV Thermal Stability - 950F The ideal coating for a wide range of applications, materials, and cutting conditions where tool life and higher feeds and speeds are operating objectives. The high lubricity of TiN facilitates chip flow, prevents build up and reduces cutting forces and temperature. TiN reduces wear and improves chip formation to extend tool life. TiN is a good choice for for the machining of iron-based materials, molding of plastics, and for components requiring resistance to abrasive and adhesive wear.

TiCN - Titanium Carbonitride Hardness - 4000HV Thermal Stability - 750F An exceptional high hardness and low coefficient of friction coating which provides excellent wear resistance. TiCN performs well cutting alloy steels, stainless steels, and in high speed cutting where moderate temperatures are generated at the cutting edge. Provides an excellent surface quality on machined components. Also, excellent in applications which require high feed and speed rates.

AlTiN - Aluminum Titanium Nitride Hardness - 4500HV Thermal Stability - 1450F AlTiN has very similar features to TiAlN. It is ideal for high temperature cutting operations in the same materials as TiAlN and has the same oxidation effect. AlTiN has a higher aluminum content which makes it much harder and smoother than TiAlN. It is ideal for smaller depths of cut and excels in high speed and dry machining applications and when machining hardened steel.

TE

CH

NIC

AL

DAT

A

Thermal EDP Hardness Stability

TiN Titanium Nitride 2 2900HV 500C (950F)TiCN Titanium Carbonitride 4 4000HV 400C (750F)AlTiN Aluminum Titanium Nitride 5 4500HV 800C (1450F)

Material Hardness 1st Choice 2nd ChoiceAluminum TiCN TiNAlloy Steel 160-240HBn TiN TiCNAlloy Steel 23-38 TiN TiCNAlloy Steel >38 AlTiN TiAlNCarbon Steel 160-240HBn TiN TiCNCarbon Steel 23-38 TiN TiCNCarbon Steel >38 AlTiN TiAlNLow Carbon Steel 130-240HBn TiCN TiNLow Carbon Steel 23-38 TiN TiCNLow Carbon Steel >38 AlTiN TiAlNGray Cast Iron 180-220HBn AlTiN TiAlNNodular Cast Iron 220-320HBn AlTiN TiNAustenetic Stainless Steel 180-220 TiCN TiNMartinsitic Stainless Steel <35 AlTiN TiCNMartinsitic Stainless Steel >=35 AlTiN TiAlNPH Stainless Steel <35 AlTiN TiCNPH Stainless Steel >=35 AlTiN TiAlNNi, Co, Fe Based AlTiN TiAlNTitanium AlTiN TiAlN

TE

CH

NIC

AL D

ATA

FLUTELENGTH

OVERALLLENGTH

MILL DIAMETER

SHANK DIAMETER

HELIXANGLE

SECONDARY ANGLE (END)

TOOTHHEIGHT

WEB

RAKEANGLE

PRIMARY ANGLE (SIDE)

CORE DIAMETER

FOUR FLUTE CENTER-CUTTING

FOUR FLUTE NON CENTER-CUTTING

TWO FLUTE BALL

TWO FLUTE CENTER-CUTTING

THREE FLUTE CENTER-CUTTING

SECONDARY ANGLE (SIDE)

FOUR FLUTE BALL

TOOTH WIDTH

PRIMARY LANDWIDTH (END)

GASH WIDTH

PRIMARY ANGLE (END)

PRIMARY LAND WIDTH

DISH ANGLE

GASHANGLE

AXIAL RAKE

Phone: (800) 521-1078 | (216) 362-4200 Fax: (800) 521-1558 | (216) 362-4230 119

120

SIZE DECIMAL SIZE DECIMAL SIZE DECIMAL SIZE DECIMAL SIZE DECIMAL97 .0059 54 .0550 25 .1495 6.7mm .2638 7/16" .437596 .0063 1.4mm .0551 3.8mm .1496 17/64" .2656 11.5mm .452895 .0067 1.45mm .0571 24 .1520 6.75mm .2657 29/64" .453194 .0071 1.5mm .0591 3.9mm .1535 H .2660 15/32" .468893 .0075 53 .0595 23 .1540 6.8mm .2677 12mm .472492 .0079 1.55m .0610 5/32" .1562 6.9mm .2717 31/64" .4844

.2mm .0079 1/16" .0625 22 .1570 I .2720 12.5mm .492191 .0083 1.6mm .0630 4mm .1575 7mm .2756 1/2" .500090 .0087 52 .0635 21 .1590 J .2770 13mm .5118

.22mm .0087 1.65mm .0650 20 .1610 7.1mm .2795 33/64" .515689 .0091 1.7mm .0669 4.1mm .1614 K .2810 17/32" .531288 .0095 51 .0670 4.2mm .1654 9/32" .2812 13.5mm .5315

.25mm .0098 1.75mm .0689 19 .1660 7.2mm .2835 35/64" .546987 .0100 50 .0700 4.25mm .1673 7.25mm .2854 14mm .551286 .0105 1.8mm .0709 4.3mm .1693 7.3mm .2874 9/16" .562585 .0110 1.85mm .0728 18 .1695 L .2900 14.5mm .5709

.28mm .0110 49 .0730 11/64" .1719 7.4mm .2913 37/64" .578184 .0115 1.9mm .0748 17 .1730 M .2950 15mm .5906

.3mm .0118 48 .0760 4.4mm .1732 7.5mm .2953 19/32" .593883 .0120 1.95mm .0768 16 .1770 19/64" .2969 39/64" .609482 .0125 5/64" .0781 4.5mm .1772 7.6mm .2992 15.5mm .6102

.32mm .0126 47 .0785 15 .1800 N .3020 5/8" .625081 .0130 2mm .0787 4.6mm .1811 7.7mm .3031 16mm .629980 .0135 2.05mm .0807 14 .1820 7.75mm .3051 41/64" .6406

.35mm .0138 46 .0810 13 .1850 7.8mm .3071 16.5mm .649679 .0145 45 .0820 4.7mm .1850 7.9mm .3110 21/32" .6562

1/64" .0156 2.1mm .0827 4.75mm .1870 5/16" .3125 17mm .6693.4mm .0157 2.15mm .0846 3/16" .1875 8mm .3150 43/64" .6719

78 .0160 44 .0860 4.8mm .1890 O .3160 11/16" .6875.45mm .0177 2.2mm .0866 12 .1890 8.1mm .3189 17.5mm .6890

77 .0180 2.25mm .0886 11 .1910 8.2mm .3228 45/64" .7031.5mm .0197 43 .0890 4.9mm .1929 P .3230 18mm .7087

76 .0200 2.3mm .0906 10 .1935 8.25mm .3248 23/32" .718875 .0210 2.35mm .0925 9 .1960 8.3mm .3268 18.5mm .7283

.55mm .0217 42 .0935 5mm .1969 21/64" .3281 47/64" .734474 .0225 3/32" .0938 8 .1990 8.4mm .3307 19mm .7480

.6mm .0236 2.4mm .0945 5.1mm .2008 Q .3320 3/4" .750073 .0240 41 .0960 7 .2010 8.5mm .3346 49/64" .765672 .0250 2.45mm .0965 13/64" .2031 8.6mm .3386 19.5mm .7677

.65mm .0256 40 .0980 6 .2040 R .3390 25/32" .781271 .0260 2.5mm .0984 5.2mm .2047 8.7mm .3425 20mm .7874

.7mm .0276 39 .0995 5 .2055 11/32" .3438 51/64" .796970 .0280 38 .1015 5.25mm .2067 8.75mm .3445 20.5mm .807169 .0292 2.6mm .1024 5.3mm .2087 8.8mm .3465 13/16" .8125

.75mm .0295 37 .1040 4 .2090 S .3480 21mm .826868 .0310 2.7mm .1063 5.4mm .2126 8.9mm .3504 53/64" .8281

1/32" .0312 36 .1065 3 .2130 9mm .3543 27/32" .8438.8mm .0315 2.75mm .1083 5.5mm .2165 T .3580 21.5mm .8465

67 .0320 7/64" .1094 7/32" .2188 9.1mm .3583 55/64" .859466 .0330 35 .1100 5.6mm .2205 23/64" .3594 22mm .8661

.85mm .0335 2.8mm .1102 2 .2210 9.2mm .3622 7/8" .875065 .0350 34 .1110 5.7mm .2244 9.25mm .3642 22.5mm .8858

.9mm .0354 33 .1130 5.75mm .2264 9.3mm .3661 57/64" .890664 .0360 2.9mm .1142 1 .2280 U .3680 23mm .905563 .0370 32 .1160 5.8mm .2283 9.4mm .3701 29/32" .9062

.95mm .0374 3mm .1181 5.9mm .2323 9.5mm .3740 59/64" .921962 .0380 31 .1200 A .2340 3/8" .3750 23.5mm .925261 .0390 3.1mm .1220 15/64" .2344 V .3770 15/16" .9375

1mm .0394 1/8" .1250 6mm .2362 9.6mm .3780 24mm .944960 .0400 3.2mm .1260 B .2380 9.7mm .3819 61/64" .953159 .0410 3.25mm .1280 6.1mm .2402 9.75mm .3839 24.5mm .9646

1.05mm .0413 30 .1285 C .2420 9.8mm .3858 31/32" .968858 .0420 3.3mm .1299 6.2mm .2441 W .3860 25mm .984357 .0430 3.4mm .1339 D .2460 9.9mm .3898 63/64" .9844

1.1mm .0433 29 .1360 6.25mm .2461 25/64" .3906 1" 1.00001.15mm .0453 3.5mm .1378 6.3mm .2480 10mm .3937

56 .0465 28 .1405 E .2500 X .39703/64" .0469 9/64" .1406 1/4" .2500 Y .4040

1.2mm .0472 3.6mm .1417 6.4mm .2520 13/32" .40621.25mm .0492 27 .1440 6.5mm .2559 Z .41301.3mm .0512 3.7mm .1457 F .2570 10.5mm .4134

55 .0520 26 .1470 6.6mm .2598 27/64" .42191.35mm .0531 3.75mm .1476 G .2610 11mm .4331

DECIMAL EQUIVALENT CHART

Documents

Melin Catalog 2005