Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
TM
Since 2004
MECHANICAL ENGINEERING(Two Years Program)
ONLINE TEST SERIES
GATE 2021 & 2022 Compete with the best...
www.onlinetestseries.gateacademy.co.inStep to success... GATE ACADEMY
Our procient faculties have done extensive research to prepare and shape these test series.
An opportunity for students to come across their strengths and weaknesses and work on them properly to turn the things around.
Care has been taken to ensure that the quality of questions has the same level of difculty as is there in the GATE.
Highlights (Two Years Program) :
GATE 2021 & 2022 ONLINE TEST SERIESCompete with the best...
• This 2 years test series program has been designed specially for 3rd
year students.
• This complete package contains 100+ quality tests.
• There are 25 topic wise tests, 24 subject wise tests, 28 combined
subjects tests, 10 condence builder mock tests and 15 full length
mock tests.
• Exam software will let you feel environment same as GATE.
• Best question bank containing all difculty levels from entire syllabus
for complete preparation.
• This test series gives the exibility to students to appear in the tests
any time & from anywhere based on their convenience and check
their level of preparation.
• The individual results will be available immediately after the test.
• Students can check their relative performance based on different
parameters, such as question wise i.e. for a particular question how
many students were able to correctly solve that question and how
much time they have taken.
• All India Rank and comparison with All India GATE 2021 aspirant
will be available in most comprehensive manner.
• Electronic Gadgets such as virtual keyboard and virtual calculator
available.
Mechanical Engineering
GATE ACADEMY TEST SERIES STRUCTURE (ME)
Containing 100+ Quality Tests
rd (Two Years Program-Specially Designed for 3 Year Students)
thStarting from 15 July 2020
Excellent solutions by different methods to discuss all related concepts to avoid necessity of text books at the time of revision.
GET STARTED
Stage - ITopic Wise Tests (25)
Stage - IISubject Wise Tests (12)
[Moderate Level]
The complete GATE Syllabus
of each subject is divided in
two parts to form Test-1 and
Test-2, containing easy to
moderate level questions
covering all important
formula and concepts.
Test-1 Test-2
Feel the GATE exam 15
time before the actual
GATE exam
Mock-1
Mock-2
Mock-3
Mock-4
Mock-5
Mock-6
Mock-7
Mock-8
Mock-9
Mock-10
Stage - VSubject Wise Tests (12)
[Advance Level]
Stage - IIICombined Subject Tests (14)
[Moderate Level]
Stage - VICombined Subject Tests (14)
[Advance Level]
Stage - IVConfidence Builders
MOCK (10)To boost the condence this
stage will include excellent
previous year questions of
GATE/ESE/SSC-JE/RRB-JE
Maths + Aptitude
SOM + MD
EM + TOM
FM + FM/C
HMT + Basic Thermo.
Production + Industrial
Applied Thermo. +FM/C
One test for each subject, covering whole syllabus of
each subject
Maths
Aptitude
SOM
HMT
EM
MD
TOM
Production
Industrial
FM & FM/C
Basic Thermo.
Applied Thermo.
Mock-11
Mock-12
Mock-13
Mock-14
Mock-15
Stage - VIIFull Length MOCK Tests (15)
GATE 2021 & 2022ONLINE TEST SERIES
Compete with the best...
For Special Discount
2 Years Test Series Program
Gate Academy Students
1500 Rs + GST
COMPLETE TEST PACKAGE
700 Rs + GST
Only Topicwise Tests
Only Subjectwise Tests (Moderate+Adv.)
Subjectwise + Full Lengths Tests
Topicwise + Subjectwise Tests
Descrip�on
Full Length Tests
25
39
49
24
15
Total No. of Tests Price600 Rs + GST
600 Rs + GST
700 Rs + GST
800 Rs + GST
900 Rs + GST
Test Name Description
Topic Wise Tests (Total 25 tests)
Star�ng from 15 July 2020
Subject Wise Tests (Moderate Level) (Total 12 tests)
Star�ng from 30 Aug 2020
Combined Subject Tests (Moderate Level) (Total 14 tests)
Star�ng from 30 Sep 2020
Confidence Builder Mock Tests (Total 10 tests)
Star�ng from 5 Nov 2020
Subjectwise Tests (Advance Level)(Total 12 tests)
Star�ng from 20 Dec 2020
Combined Subject Test (Advance Level) (Total 14 tests)
Star�ng from 30 Jan 2021
Star�ng from 15 March 2021Full Length Mock Tests (Total 15 tests)
Total
100+ Tests
Total
100+ Tests
BRANCH : MECHANICAL ENGINEERING (Two Years Program)Online Test Series Schedule for GATE 2021 & 2022
Use coupon code of any faculty and avail additional 15% discounton complete package
Online Test Series Schedule for GATE 2021 & 2022BRANCH : MECHANICAL ENGINEERING
Topic-wise Tests (Two Years Program)(Each test carries 25 marks and 45 minutes duration.
Test consists of 5 one mark questions and 10 two marks questions)
Test 1
Test 2
Topic
Strength of
Materials
Stress And Strain, Stress-stress Rela�onship And Elas�c Constants,
Shear Force And Bending Moment Diagrams, Thermal Stresses,
Mohr's Circle For Plane Stress And Plane Strain, Thin Cylinders
Subject Date (Available From)
15 July 2020Deflec�on of beams; torsion of circular sha�s; Euler's theory of
columns; strain energy methods; strain gauges and rose�es;
tes�ng of materials with universal tes�ng machine; tes�ng of
hardness and impact strength.
Topic
FluidMechanics
Fluid properties; fluid statics, manometry, buoyancy; forces on submerged bodies; stability of floating bodies; fluid acceleration; differential equations of continuity; Control-volume analysis of mass, momentum and energy,
Subject Date (Available from)
Fluid Dynamics , Laminar Flow & Turbulent Flow , Flow through pipes , Boundary layer, Dimensional Analysis
Test 1
Test 2
15 July 2020
Topic
IndustrialEngineering
Production Planning and Control: Break- even analysis, Forecasting models, Scheduling / Sequencing, Material Requirement Planning (MRP), Line balancing.Inventory control : Deterministic and Probabilistic models, Safety stock inventory control systems.
Subject Date (Available from)
Test 1
Test 2
15 July 2020Operation Research: Linear programming problem (Graphical and Simplex method), Transportation problem, Assignment problem,Queuing theory.CPM : Project network, Project completion time, Types of float, Crashing.PERT : Mean project completion time, Standard deviation and Variance
Topic
EngineeringMechanics
Free-body diagrams and equilibrium; trusses and frames; virtual work; friction, Moment of inertia
Subject Date (Available from)
Test 1
Test 2
15 July 2020kinematics and dynamics of particles and of rigid bodies in plane motion; impulse and momentum (linear and angular) and energy formulations, collisions.
Topic
Theory ofMachine
Displacement, velocity and acceleration analysis of plane mechanisms; dynamic analysis of linkages; gears trains; flywheels and governors.
Subject Date (Available from)
Test 1
Test 2
15 July 2020Cams; Free and forced vibration of single degree of freedom systems; effect of damping, vibration isolation; resonance; critical speeds of shafts. balancing of reciprocating and rotating masses; gyroscope.
Topic
EngineeringMathematics
Linear Algebra, Differen�al Equa�on, Limits and Series expansion, Probability, Numerical methods, Vector Calculus
Subject Date (Available from)
Test 1
Test 215 July 2020Differen�al Calculus, Integral Calculus, Mean Value
Theorem, Complex Variable, Maxima and Minima
Topic
ManufacturingEngineering
Material science: Structure of material ( SCC, BCC, FCC, HCP), Unit cell parameter (APF, Coordination number, Number of atoms per unit cell), Imperfection or Defects (Point, line, surface), Iron-carbon equilibrium diagram, TTT diagram, Heat treatment processes (Hardening, Annealing, Normalizing, Tempering).Casting: Pattern size, Allowances (Shrinkage, Machining, Draft, Shake/ Rapping, Distortion/ Bending allownces ), Permeability number, Core making, Gating ratio, Pouring or Filling time, Aspiration effect, Solidification time, Riser design (Freezing ratio, Shape factor), Miscellaneous casting processes (Slush casting, Investment casting, Centrifugal casting etc), Casting defects.Welding: Gas welding, Arc welding (TIG, MIG, SAW, Arc - Voltage characteristic and Linear- Power source characteristic), Friction welding, Thermit welding, Resistance welding,Soldering,Brazing and Braze welding, Welding defects.
Subject Date (Available from)
Test 1
Test 2
15 July 2020Metal forming processes: Rolling ,Drawing, Extrusion, Forging.Sheet metal operation: Punching, Blanking, Deep drawing, Bending.Metal cutting and machining: Tool geometry and Tool designation, Merchant circle diagram, Taylor's tool life equation, Economics of machining, Shaping, Planning, Turning, Boring, Drilling, Milling, Grinding.Non-conventional machining: AJM, USM, ECM, EDM, EBM, LBM.Principle of Powder metallurgy: Sintering, Infiltration, Impregnation.
Metrology and inspection: Linear and Angular measurements, Limits, Fits and Tolerances, Hole base and Shaft base system, Fundamental deviation, Standard tolerance unit, Limit gauge (Plug and Ring gauge, GO size and NO-GO size).Advance machining method: Basic concepts of NC and CNC , Basic length unit (BLU) , Part programming of CNC (G-code and M-code).Gear manufacturing processes: Gear forming, Gear generation (Gear shapping, Gear hobbing )
Test 3
Topic
GeneralAptitude
Quantitative Aptitude
Subject Date (Available from)
Test 1
Test 215 July 2020
Verbal Aptitude
Test 1
Test 2
Topic
Heat
Transfer
Modes Of Heat Transfer; One Dimensional Heat Conduc�on,
Resistance Concept, Electrical Analogy, Unsteady Heat Conduc�on,
Lumped Parameter System, Heisler's Charts, Heat Transfer Through
Extended Surfaces.
Subject Date (Available From)
15 July 2020Thermal Boundary Layer, Dimensionless Parameters In Free And
Forced Convec�ve Heat Transfer, Heat Transfer Correla�ons For
Flow Over Flat Plates And Through Pipes, Effect Of Turbulence,
Heat Exchanger Performance, LMTD And NTU Methods, Radia�ve
Heat Transfer, Stefan-boltzmann Law Wien's Displacement Law,
Black And Grey Surfaces, View Factors, Radia�on Network
Analysis.
Subjects Date (Available from)
Topic-wise Tests (Two Years Program)(Each test carries 30 marks and 60 minutes dura�on.
Test consists of 10 one mark ques�ons and 10 two marks ques�ons)
General Ap�tude + General English
Engineering Mathema�cs
Strength of Material
Fluid Mechanics & Machinery
Engineering Mechanics
Basic Thermodynamics
Applica�ons of Thermodynamics
Heat Transfer
Produc�on
Industrial
Theory of Machine
Machine Design
No. of Tests
02
02
02
02
02
02
02
02
03
02
02
02
Star�ng from 15 July 2020
Star�ng from 15 July 2020
Star�ng from 15 July 2020
Star�ng from 15 July 2020
Star�ng from 15 July 2020
Star�ng from 15 July 2020
Star�ng from 15 July 2020
Star�ng from 15 July 2020
Star�ng from 15 July 2020
Star�ng from 15 July 2020
Star�ng from 15 July 2020
Star�ng from 15 July 2020
Topic
BasicThermo-dynamics
Thermodynamic systems and processes; Zeroth and first law of thermodynamics, calculation of work and heat in various processes.
Subject Date (Available from)
Second law of thermodynamics, Entropy, Thermodynamic property charts and tables, availability and irreversibility; thermodynamic relations, Properties of Pure Substances, Behavior of Ideal and Real Gases.
Test 1
Test 215 July 2020
Topic
AppliedThermo-dynamics
Power Engineering: Air and gas compressors, vapour and gas power cycles, concepts of regeneration and reheat, I.C. Engines; Air-standard Otto, Diesel and dual cycles, Fuel and Combustion.
Subject Date (Available from)
Refrigeration and air conditioning : Vapour and gas refrigeration and heat pump cycles, properties of moist air, psychrometric chart, basic psychrometric processes.
Test 1
Test 2
15 July 2020
Design for static and dynamic loading; failure theories; fatigue
strength and the S-N diagram; principles of the design of machine
elements such as bolted, riveted and welded joints
Spur gears, rolling and sliding contact bearings, brakes, clutches and springs.
Test 1
Test 2
Topic
Machine
Design
Subject Date (Available From)
15 July 2020
Subjects Date (Available from)
Subject-wise Tests (Two Years Program)(Each test carries 50 marks and 90 minutes dura�on.
Test consists of 10 one mark ques�ons and 20 two marks ques�ons)
General Ap�tude + General English
Engineering Mathema�cs
No. of Tests
Moderate- 01
Advance- 01
Star�ng from 30 Aug 2020
Star�ng from 20 Dec 2020
Moderate- 01
Advance- 01
Star�ng from 30 Aug 2020
Star�ng from 20 Dec 2020
Moderate- 01
Advance- 01
Star�ng from 30 Aug 2020
Star�ng from 20 Dec 2020
Moderate- 01
Advance- 01
Star�ng from 30 Aug 2020
Star�ng from 20 Dec 2020
Moderate- 01
Advance- 01
Star�ng from 30 Aug 2020
Star�ng from 20 Dec 2020
Moderate- 01
Advance- 01
Star�ng from 30 Aug 2020
Star�ng from 20 Dec 2020
Moderate- 01
Advance- 01
Star�ng from 30 Aug 2020
Star�ng from 20 Dec 2020
Moderate- 01
Advance- 01
Star�ng from 30 Aug 2020
Star�ng from 20 Dec 2020
Moderate- 01
Advance- 01
Star�ng from 30 Aug 2020
Star�ng from 20 Dec 2020
Moderate- 01
Advance- 01
Star�ng from 30 Aug 2020
Star�ng from 20 Dec 2020
Moderate- 01
Advance- 01
Star�ng from 30 Aug 2020
Star�ng from 20 Dec 2020
Moderate- 01
Advance- 01
Star�ng from 30 Aug 2020
Star�ng from 20 Dec 2020
Tests Date (Available from)
Confidence Builder Mock (CBM) (Two Years Program)(Each test carries 100 marks and 3 hours dura�on as per GATE Pa�ern)
Confidence Builder Mock (CBM) - 1 Star�ng from 5 Nov 2020
Star�ng from 5 Nov 2020
Star�ng from 5 Nov 2020
Star�ng from 5 Nov 2020
Star�ng from 5 Nov 2020
Star�ng from 5 Nov 2020
Star�ng from 5 Nov 2020
Star�ng from 5 Nov 2020
Star�ng from 5 Nov 2020
Star�ng from 5 Nov 2020
Confidence Builder Mock (CBM) - 2
Confidence Builder Mock (CBM) - 3
Confidence Builder Mock (CBM) - 4
Confidence Builder Mock (CBM) - 5
Confidence Builder Mock (CBM) - 6
Confidence Builder Mock (CBM) - 7
Confidence Builder Mock (CBM) - 8
Confidence Builder Mock (CBM) - 9
Confidence Builder Mock (CBM) - 10
Strength of Material
Fluid Mechanics & Machinery
Engineering Mechanics
Basic Thermodynamics
Applica�ons of Thermodynamics
Heat Transfer
Produc�on
Industrial
Theory of Machine
Machine Design
Moderate Level 1
Advance Level 1
Star�ng from 30 Sep 2020
Star�ng from 30 Jan 2021
Moderate Level 1
Advance Level 1
Star�ng from 30 Sep 2020
Star�ng from 30 Jan 2021
Moderate Level 1
Advance Level 1
Star�ng from 30 Sep 2020
Star�ng from 30 Jan 2021
Moderate Level 1
Advance Level 1
Star�ng from 30 Sep 2020
Star�ng from 30 Jan 2021
Moderate Level 1
Advance Level 1
Star�ng from 30 Sep 2020
Star�ng from 30 Jan 2021
Moderate Level 1
Advance Level 1
Star�ng from 30 Sep 2020
Star�ng from 30 Jan 2021
Maths + Ap�tude
SOM + MD
EM + TOM
FM + FM/C
HMT + Basic Thermo.
Produc�on + Industrial
Applied Thermo. +FM/C
Combined Subject Tests (Two Years Program)(Each test carries 50 marks and 90 minutes dura�on.
Test consists of 10 one mark ques�ons and 20 two marks ques�ons)
Subjects Date (Available from)No. of Tests
Moderate Level 1
Advance Level 1
Star�ng from 30 Sep 2020
Star�ng from 30 Jan 2021
Full Length Mock GATE (Tentative Schedule for Two Years Program)(Each test carries 100 marks and 3 hours dura�on as per GATE Pa�ern)
Subjects Date (Available from)
Star�ng from 15 May 2021
Star�ng from 15 June 2021
Star�ng from 15 July 2021
Star�ng from 15 Aug 2021
Star�ng from 15 Sep 2021
Star�ng from 15 Oct 2021
Star�ng from 15 Nov 2021
Star�ng from 15 Dec 2021
Star�ng from 30 Dec 2021
Star�ng from 05 Jan 2022
Full Length Mock - 6
Full Length Mock - 7
Full Length Mock - 8
Full Length Mock - 9
Full Length Mock - 10
Full Length Mock - 11
Full Length Mock - 12
Full Length Mock - 13
Full Length Mock - 14
Full Length Mock - 15
Full Length Mock - 1
Full Length Mock - 2
Full Length Mock - 3
Full Length Mock - 4
Full Length Mock - 5
Star�ng from 15 March 2021
Star�ng from 15 March 2021
Star�ng from 15 March 2021
Star�ng from 15 March 2021
Star�ng from 15 March 2021
HEAD OFFICE : A / 114-115, SMRITI NAGAR, BHILAI - 490 020 (C.G.)Contact : 97131-13156, 62662-02387, 0788-4034176
E-mail : [email protected]
SINCE 2004
GATE ACADEMY
Step - I Step - II
Visit
h�p://onlinetestseries.gateacademy.co.in
Click on New Registra�on
Fill the Form, You will be Redirected to the Test Portal
Click on buy Package Make Payment using Coupon code
(For gate academy student) or by online payment.
Send completely filled
registra�on form to our office
(for gate academy student)
Finally... How to get registered for Test Series ?
Join GATE ACADEMY Live Classroom/VOD/Pen Drive/G-Drive/ Tablet Course
For Assured Results
Ÿ Tablet course will be delivered through Samsung
Galaxy Tab A (WiFi only).
Ÿ All GATE ACADEMY apps will come pre loaded.
Ÿ Tablet will be controlled by our team for the course duration.
Ÿ After course duration the tablet will be made open for your use.
Ÿ The Course content will be exactly same as VOD course but you do
not need Internet connection to play the video (as it is an offline
course
Tablet Course
Ÿ It is best offline mode of video course.
Ÿ Dedicated discussion and doubt portal managed
by our faculties.
Ÿ Complete packaged course with all reading content
and Online Test Series.
Ÿ Ready to ship course, It will be shipped to you within 2 days of
ordering.
Pen Drive & G-Drive Course TM
Sin
ce 2
004
For Doubt and Discussion you need to download GATE ACADEMY learning app, Subject matter expert/ faculty will be there to solve your query
A DEDICATED TECH TEAM TO SOLVE TECH QUERIES AND HANDLE TECHNICAL ISSUES.
Video on Demand Ÿ VoD is the best online tool for self preparation
students.
Ÿ Available for Android and Windows.
Ÿ All you need is decent internet connection and our GATE
ACADEMY Learning App.
Ÿ All reading content will be provided within the App only.
Ÿ Dedicated discussion and doubt portal managed by our faculties.
For Doubt and Discussion you need to download GATE ACADEMY learning app, Subject matter expert/ faculty will be there to solve your query
A DEDICATED TECH TEAM TO SOLVE TECH QUERIES AND HANDLE TECHNICAL ISSUES.
Live Classroom Program Ÿ Online Live Classroom program by team GATE
Academy, the exact feel of offline Classroom by
being in your comfort zone.
Ÿ Available only on Android app (Gate Academy Live)
Ÿ You can also watch it after live class as video on demand within
your given and limited watch time.
Ÿ You can ask anything, a doubt clearing session with chat box
during the class.
Ÿ All reading content will be provided within the live app only.
LIVELIVE