Embed Size (px)
Citation preview
MDTools® 970 What’s New 1 22 of
MDTools 970
MDTools 970
The 20th generation manifold design app
What’s New
®
MDTools® 970 What’s New 2 22 of
MDTools 970 What’s New®
TOC
Precise Reference Point Selection in Custom Envelope
Stretch and Incline a Setting Option
Preview Angular Connection
Improved Offset Connection
Create Views UI Improved
Auto Scale Drawing Views
Improved Create Block Interface
Create Block Using Plate as a Material Type
Dimension only Selected Cavity Types
Improved Locate Cavity
MDTools Library Manager 2019
Manage Materials Bars
Manage Materials Plates
Add/Modify Materials and Allowances
Drawing Dimensions automatically updated
Miscellaneous Lists automatically updated
Machining Chart automatically updated
Balloons/Annotations automatically updated
Create all Miscellaneous Charts in Single Sheet
Contact VEST
MDTools® 970 What’s New 3 22 of
Improved Offset ConnectionNEW
Improved Offset connection
in MDTools 970
Improved offset connections create a better flow path with reduced pressure drop
Offset connection in MDTools 965
Learn more…(Research Paper)
MDTools® 970 What’s New 4 22 of
Preview Angular ConnectionNEW
Modify ports and dimensions while watching the Angular Drill preview for easy visualization
MDTools® 970 What’s New 5 22 of
Stretch and Incline a Setting OptionNEW
The Stretch Drill defaults control whether Allow Change of Inclination is active when the Stretch Drill command starts
Stretch Drill for an Inclined Drill
Stretch Drill for a non-Inclined Drill
MDTools® 970 What’s New 6 22 of
Improved Locate CavityImproved Locate CavityNEW
Machining ID of Cavities is also displayed along with the respective Component ID
Selected Cavity gets highlighted in Part (Block)
MDTools® 970 What’s New 7 22 of
Improved Create Block InterfaceImproved Create Block InterfaceNEW
Define Machining Allowance for the material either manually or in MDTools Library Manager
Materials standardized in MDTools Library Manager
View both Raw Stock andmachined dimensions of the block
MDTools® 970 What’s New 8 22 of
Create Block Using Plate as a Material TypeCreate Block Using Plate as a Material Type
Manage Plate Thickness and Machining Allowance in MDTools Library Manager
Manage thickness of plates and machining allowanceUse Plate as a Material type
NEW
MDTools® 970 What’s New 9 22 of
Precise Reference Point Selection in Custom EnvelopeNEW
Precisely select the Reference Sketch Point
MDTools® 970 What’s New 10 22 of
Create Views UI ImprovedNEW
Drawing View settings
Views Position settings
Views Annotation Display settings
Note: All settings related to Views are organized in ‘Create Views’.
MDTools® 970 What’s New 11 22 of
NEW
Set Sheet Scale to change size of views in a drawing
Auto Scale Drawing Views
MDTools® 970 What’s New 12 22 of
Dimension only Selected Cavity TypesDimension only Selected Cavity TypesNEW
Selected cavity types dimensioned (Ports), while others left un-dimensioned
MDTools® 970 What’s New 13 22 of
NEW
MDTools automatically updates the dimensioning of the drawing when the Part (Block) is modified
Drawing Dimensions Automatically Updated
MDTools® 970 What’s New 14 22 of
Create all Miscellaneous Charts in Single SheetNEW
Machining Drawing command creates all miscellaneous charts in a single sheet
MDTools® 970 What’s New 15 22 of
Miscellaneous Lists Automatically UpdatedNEW
Updated Engraving Chart
MDTools automatically updates the Charts on the Miscellaneous lists Sheet when the Part (Block) is modified
For example, when the cavity C2 is deleted from the block, then upon re-opening the drawing, the charts will be updated with C2 gone
MDTools® 970 What’s New 16 22 of
Machining Chart Automatically UpdatedNEW
Updated Machining chart
MDTools automatically updates the Machining Chart when the Part (Block) is modified
MDTools® 970 What’s New 17 22 of
Balloons/Annotations Automatically UpdatedNEW
Balloons and all MDTools drawing annotations updated when the Part (Block) is modified
MDTools® 970 What’s New 18 22 of
MDTools Library Manager 2019NEW
Materials section included in MDTools Library Manager 2019
MDTools® 970 What’s New 19 22 of
Manage Material BarsNEW
Manage cross section and machining allowance of bars
Select Material for Bar
NEW
MDTools® 970 What’s New 20 22 of
Manage Material PlatesNEW
Manage thickness and machining allowance of plates
Select Material for Plate
MDTools® 970 What’s New 21 22 of
Add/Modify Materials and AllowancesNEW
Manage material cross section and machining allowance of bars and plates
NEW
MDTools® 970 What’s New 22 22 of
Contact VEST
Contact VEST
Do more…
MDTools 970manifold design software
®
v200408 © 2020 VEST, Inc. All rights reserved
USA: +1 (248) 649-9550 [email protected]
Europe: +39 328 695 70 01 [email protected]
