Embed Size (px)
DESCRIPTION
Manifold Design with MDTools 740 Whats New'
Citation preview
Manifold Design
MDTools®
740 with
What’s New
IndexMDTools® 740 What’s New
” Power-to-Design” manifolds
1
2
3
4
5
6
7
8
9
10
11
Configure Machining Sequence for Slots
Add or Remove Material
Request a Manifold Quote
1
2
3
Sink Merged Orifice Plug
Configure and Create Cavity List
Switch between Angle of Projection and Reset Face Origin
Configure Net Names
Configure Component and Port List
Comments included in MDTools Cavity Library
Merge Orifice Plug to Cavity
Convert O-Ring Grooves to Feature
Insert Undercut
Stretch Cavity Step in Edit Cavity Window
Export and Import O-Ring Grooves
ENHANCEDNEW
Add or Remove Material
Add or Remove Material
Add or remove material from any selected section of the manifold
Insert Undercut
Insert Undercut
Insert an undercut at the selected port of a cavity
Configure the Machining sequence for the undercut
Define Machining Sequence for Slots
Configure Machining Sequence for Slots
Specify machining details for slots
Export and Import O-Rings
Export and Import O-Ring Grooves
O-Ring Grooves can be exported and imported through an XML file
Merge Orifice Plug to Cavity
Merge Orifice Plug to Cavity
Merge an orifice plug with the cavity and update its machining sequence
Sink Merged Orifice Plug
Sink Merged Orifice Plug
Sink the merged orifice plug in a cavity as per the specified depth with respect to the step above the orifice plug
Convert O-Rings to Feature
Convert O-Ring Grooves to Feature
O-Ring Grooves can be converted from Virtual to Feature or vice versa
Manifold Quote
Request a Manifold Quote
Get a manifold quote from a registered manifold manufacturer
Add Net Names
Configure Net Names
Add a new net name and assign a color to it
Configure and Create Cavity List
Configure and Create Cavity List
List all features in a manifold including slots, undercuts, and o-rings grooves
Configure columns and headers of Cavity List
Configure Column Header Names of Component and Port List
Configure Component and Port List
Configure Column Headers and Title
Stretch Cavity
Stretch Cavity Step In Edit Cavity Window
Stretch the step where the top port is located for all the 2 and 3 port cavities, if required
Cavity Comments from MDTools Cavity Library
Comments included in MDTools Cavity Library
The comments specified for each cavity in the MDTools Cavity library is now available inside MDTools, along with each cavity in Edit All Cavity Parameters
Switch between Angle of Projections and Reset the Face Origin
Switch between Angle of Projection and Reset Face Origin
Switch between the First and Third Angle of projection using the Auto Dimension > Set Face Origin window
The Reset button enables restoration of the default Face Origin
Contact Us
Contact VEST
MDTools® 740 Evaluation Software
Call: +01 (248) 649 9550
Fax: +01 (248) 649 9560
Email: [email protected]
Visit: www.VESTusa.com
Enhance your productivity and competitive edge
with MDTools®
