w w w . c e i a . n e t

Master Controller v2-TPTHERMAL PROFILE MONITORING

CEIA reserves the right to make changes, at any moment and without notice, to the models (including programming), their accessories and options, to the prices and conditions of sale

� Programming and management of two Power Cube generators

� Interfaces with SH temperature sensors, WF Solder Dispensers and SG Gas Diffusers

� High-definition graphic display

� Storing of work programs in internal memory or on removable high-capacity Flash Memory

� Automatic checking of the correct size of the inductor

� Built-in Self-diagnosis

� 0-10 V input to control the power supplied by the generators

� 0-10 V output for temperature reading

� RS-232 serial interface

� Compliant with the applicable Regulations on Electrical Safety and Electromagnetic Compatibility

� Thermal Profile Quality Control

> Up to 20 Programmable Temperature and Time Segments per Process

> Maximum Power Output Programmable for Each Individual Segment

> Temperature Tolerance Window Programmable for Each Individual Segment

> Out-of Tolerance and End-of-Cycle Outputs for Each Process