Massey Ferguson 200 Loader Attachment Operators Manual · 7 Loader Serial Nu~ber Massey-Fer-gusonreserves the right to make changes or add improvements at any time without incurring

Ope

rato

r’s M

anua

l

Operator’s Manual

THIS IS A MANUAL PRODUCED BY JENSALES INC. WITHOUT THE AUTHORIZATION OF MASSEY HARRIS MASSEY FERGUSON OR IT’S SUCCESSORS. MASSEY HARRIS MASSEY FERGUSON AND IT’S SUCCESSORS

ARE NOT RESPONSIBLE FOR THE QUALITY OR ACCURACY OF THIS MANUAL.

TRADE MARKS AND TRADE NAMES CONTAINED AND USED HEREIN ARE THOSE OF OTHERS, AND ARE USED HERE IN A DESCRIPTIVE SENSE TO REFER TO THE PRODUCTS OF OTHERS.

MF200 Loader

MH-O-MF200LDR

http://www.jensales.com/products/massey-ferguson-200-loader-attachment-operators-manual.html

MASSEY-FERGUSON


INDEX

CONTROLS.

OPERATION.

LIQUID-FILLING TIRES . .

LUBRICATION AND MAINTENANCE

SERVICING .

TROUBLE-SHOOTING

ACCESSORIES . .

SPECIFICATIONS.

INTRODUCTION

Page1

2

3

7

9

.10

... 13

. . 14

The MF 200 Loader with the Four-Bar Linkage is a versatile tractor-mounted unit,which can be used for various applications. It is designed to match the power and per-formance of your tractor. It is built of the finest materials available and is a productof well known manufacturers whose high technical skills, modern manufacturingfacilities and experience have made them a leader in the field. With prop·er care andmaintenance, it should give you many years of dependable service.

LOADER IDENTIFICATION

Each loader is "identified by. a Serial Number.

It is important that you refer to this serial number when ordering parts or attach-ments, or when requesting service.

This practice will ensure prompt, accurate service for your loader.

We suggest that you write the serial number in the space provided and keep thisbook handy for referring to these numbers.

7 Loader Serial Nu~ber

Massey-Fer-guson reserves the right to make changes or add improvements at any time without incurring any obligation to make changes onmachines sold previously.


SERVICING

llegular maintenance and efficient service are essential to long service life on yourMF 200 Loader.

Rely on your Massey-Ferguson Dealer for major service repairs, such as thevalve, pump and cylinders.

Fig. 18 - Servicing Oil Filter- 1. Reservoir 2. Ora in Plug 3. Fi Iter Bolt 4. Fi Iter Base

SERVICING THE OIL FILTER

1. Place a clean 5-gallon container beneaththe oil reservoir, No.1, Fig. 18, and removethe drain plug, No.2,. Fig. 18.

. 2. Remove the bolt, No.3, Fig. 18, and theassembly, No~ 4, Fig. 18, being sure to re-tain all the gaskets and "0" -rings.

3. Clean all parts, including the filter head.

4. Reassemble, using a new filter elementkit, being sure to replace all gaskets and "0"-rings included in the kit. See Fig. 19.

5. Torque the bolt, No.3, Fig. 18, to 12ft. -lbs., being sure all "0" -rings and gasketsare in place.

6. Refill reservoir to full mark on dipstickwith type "A" automatic transmission oil.

SERVICING THE AIRBREATHER/CLEANER

The air breather/cleaner, Fig. 17, should becleaned every 60 hours, or more often in ex-tremely dirty or dusty conditions.

9


SPECIFICATIONS

Shipping Weight (less bucket). . . . . . . . . . . 935 lbs.

Counterweight (accessory). . . Wheel weights availableFront bumper weights - when loader is

used on 2135, 3165, 35 and 65 Utility Tractors

Buckets. . . . . . . . . . . . . . . . . Listed under "Accessoriestf

Lifting Capacity - Full Height Calculated . 2700 lbs. (approximate) with2-1/4" diameter lift cylinders

3300 Ibs. (approximate) with 2-1/2" diameterself-leveling lift cylinders

Carrying Capacity at 3 Ft. Height (calculated) . . . . . . 3400 lbs. approximate with2-1/4" diameter lift cylinders

4200 lbs. approximate with 2-1/2" diameterself-leveling lift cylinders

Break-Away Capacity (calculated) Ground Level . . . . 4300 lbs. (approximate) with2-1/4" diameter lift cylinders

5300 lbs. (approximate) with 2-1/2" diameterself-leveling lift cylinders

Maximum Clearance at Maximum He.ight . 9 feet, 11 inches

Reach at Maximum Height (measured from extremefront of tractor with bucket dumped at 480 ). • • •

Clearance, Bucket Dump at 480 ••••••••

Reach, Bucket on Ground(measured from centerline of front wheels) .

Bucket Roll-Back (at ground level)..

Maximum Dumping Angle. .

Digging Depth Capacity. . .

21-1/2 inches

. ... 98 inches

. .. 73 inches

. 37 degrees

. 48 degrees

. 4 inches

14

Turning Clearance Circle

Cycle Time Up . .

Cycle Time Down ..

Bucket Dumping Time

HYDRAULIC SPECIFICATIONS:

Pump Type and Capacity. . .

32 feet diameter with 48 inch bucket

. 4 seconds without self-level5 seconds with self-level

3 seconds

2.5 seconds

Gear pump rated at 17 gpm@ 2000 rpm @2150 psi


Documents

Massey Ferguson 200 Loader Attachment Operators Manual · 7 Loader Serial Nu~ber Massey-Fer-gusonreserves the right to make changes or add improvements at any time without incurring