‘Market Leaders in Rendered Building Products’

The Poly-Tek Cabin

The Base

Flooring on

Steel Stratco Tuff-Floor Base with 19mm GP Flooring

Bottom Plate

All timber is 90x45 MGP 12

First PanelInsert corner junction stud then fit first panel

Panels easily lifted into place, only weighing 20kg per sqm.

Corner Panel up

Insert stud and cyclone rod

Back Wall up

Install Top plates & Tie-Down

Ensure all panels are square

Nail off Panels

Door installation

Window Installation

Installing window heads

Cutting walls on the rake

Roof Installation

Using the Bondor Solarspan Roof system the roof was installed in 2 hoursThe entire process including roof screwed on and finished was completed in

1 day!

Two coats paint later

Perfect Render Effect Finish

This finish was achieved using 2 coats of Dulux

Weathershield.

The Finished Product

The Poly-Tek SIPS Cabin