Embed Size (px)
Citation preview
Manufacturing Guide
www.timbmet.com
Founded in 1942, Timbmet is a major UK importer, distributor and supplier of Timber and Panel products. We are recognised around the world as an environmentally conscientious organisation and all our products are sourced responsibly.
Throughout our years of operation, we’ve established excellent networks within the Timber industry worldwide, allowing us to continually research and source new species, products and ranges, ensuring you have the best quality lines to choose from.
The Timbmet team has accumulated decades of experience and expertise, making us ideally placed to act as your trusted advisor. We can offer you versatile and cost effective solutions to help meet your needs, and if you have any queries, we can help by recommending the best species or products to use.
Still a family business, our founder’s enduring passion for wood inspires the ethos of the company today.
Timbmet... Everything wood should be
About Timbmet Introduction to Manufacturing ServicesTimbmet’s range of Manufacturing Services is one of the most comprehensive in the UK. Our technology and expertise, combined with our extensive range of products, means we can support all your Timber and Panel requirements.
We can cut-to-size, edge, CNC, machine, mould, lacquer, stain, prime and paint to your specifications.
Our dedicated Technical teams can give you the help and advice you need to create the right product for the right application.
| 3About Timbmet Introduction to Manufacturing Services 2 |
ABOUT TIMBM
ET / INTRODUCTION
TO MAN
UFACTURING SERVICES
About Timbmet 2
Introduction to Manufacturing Services 3
Manufacturing Services for Timber 4Timber Product Range 5The Manufacturing Journey 6Made to Order Products 8Engineered Timber (TEC®) 10Finishing 12Fire Retardant Treatment 13
Manufacturing Services for Panels 14Panel Product Range 14CNC Machining 15Cut-to-Size Service 16Edging Service 17
Responsible Business 18UK Coverage 19
Sawn Timber 4
www.timbmet.com
4 | Manufacturing Services for Timber
Manufacturing Servicesfor TimberTimbmet offers a comprehensive selection of Manufacturing Services, in addition to our extensive product range.
We can select sawn material from stock, or source from our vast supplier network, and then, using our on-site facilities and expertise, we process the Timber to meet your end requirement.
Timbmet will work with you from your initial specification through to the finished article, simplifying the entire process. From finding the right Timber species, turning your sketches into components, manufacturing the components, finishing them and delivering them to you on time.
Timber Product RangeSAW
N TIM
BERM
ANUFACTURIN
G FOR TIMBER / TIM
BER PRODUCT RANGE
| 5
Further Information
For more information on our range of Timber products,
visit www.timbmet.com
or request a copy of our Timber Product Guide from [email protected]
TimbmetDoor Products Guide
Timbmet Veneered Board Rangesolutions in wood
Guide to Panels, Doors & Worktops
TimbmetAn IntroductionTimber Product Guide
Profiles and Mouldings Timbmet offer a vast selection of industry standard profiles and a range of pre-machined mouldings from stock.
We can also create bespoke profiles and mouldings to meet your requirements (see page 8).
Timbmet has been renowned for its Timber product offering for more than 70 years. Today we supply over 40 species of Timber and a range of Engineered Timber components (TEC®), and Manufactured Timber products.
All our products are responsibly sourced, with many certified species available.
Our expert knowledge means our team can offer advice for your individual project.
Timber Product Range
www.timbmet.com
The Manufacturing Journey
The Manufacturing Journey 6 | | 7The Manufacturing Journey
Hand SelectionYour orders are hand-picked by our skilled staff, many of whom have over 30 years’ experience in the Timber industry. They turn and select the Timber to meet your requirements, optimising the yield from each piece.
CAD Our powerful CAD software enables us to transform a simple sketch or photograph into a professional drawing, or create a match for an existing sample.
SawingOur cross cutter, twin line and multi-rip saws allow us to provide a fast and efficient sawing service. Our multi-rip saw can cut multiple pieces in the same pass; helping us to reduce production times.
Tool RoomWe then transform your CAD drawing into a template which is placed in a profile grinder to create a precision cutter.
THE MAN
UFACTURING JOURN
EY
Other Manufacturing ServicesAdditional in-house manufacturing services include cross cutting to length, CNC and trenching; all serviced by a highly skilled team.
If you’re not sure what you need, or where to start, just ask our Manufacturing team on 01865 860350.
We’re here to help you every step of the way.
Finishing A wide range of finishing is available from Timbmet. We can lacquer, paint, prime, stain, sand or fire treat your products.
MouldingThe cutter is transferred to one of our Powermat moulding machines ready to produce your finished component.
www.timbmet.com
| 9 8 | | 9
www.timbmet.com
MADE TO ORDER PRODUCTS
Made to Order ProductsMade to Order Products 8 |
Bespoke Profiles and Mouldings Timbmet supply a vast selection of industry standard profiles and pre-fabricated mouldings in your choice of Timber; in varying widths, thicknesses and species. In addition, our machining facilities enable us to produce Bespoke Profiles and Mouldings to any design, ranging from basic planed four-sided profiles to more complicated architectural moulds.
We can work with your own designs or samples and replicate them for your final project specification.
For enquiries, please contact our Manufacturing team on 01865 860350.
Made to Order ProductsIn addition to our comprehensive Manufacturing Services, Timbmet can manufacture a number of products to meet your exact specifications.
Minimum order quantities apply.
SAM® Trimax Timbmet stock fascias, soffits and cladding from the SAM® Trimax range, made from an exceptionally durable fibreboard; Medite Tricoya Extreme.
As well as being available in standard profiles, our range can be manufactured in bespoke profiles to your specification and coloured to any RAL colour (minimum order quantity applies).
Siparila Exterior CladdingOur end-matched factory painted exterior Cladding is manufactured in Finland, by Siparila. It can be coloured to a large variety of colours, including to any RAL paint reference.
www.timbmet.com
Bespoke TEC®
Timbmet can manufacture Bespoke TEC® products for individual projects, satisfying the most demanding specifications.Components include: passive window and door components, thermally modified timber with improved dimensional stability, Air-o-therm window components and Glulam laminated beams.
To discuss your bespoke requirements, please contact our Manufacturing team on 01865 860350.
For more information on our range of TEC® products, visit www.timbmet.com or request a copy of our Timber Product Guide.
Benefits of TEC®
• Dimensional stability The multi-layer construction offers stability and stress
performance far in excess of traditional solid wood.
• Less waste Made to measure components mean less waste.
They’re easier to assemble, keeping labour costs to a minimum.
• Reduced handling Regular sized components, so handling and storage is
easier and more efficient.
• Flawless TEC® products are free from knots, splits and staining.
• FD30 fire certified
Timbmet Engineered Components (TEC®) are highly engineered wood products designed to combine high performance and aesthetic appeal.
Engineered Timber (TEC®) Bespoke TEC®
Further Information
For more information on our range of Engineered Timber products,
visit www.timbmet.com or request a copy of our
Timber Product Guide [email protected]
TimbmetDoor Products Guide
Timbmet Veneered Board Rangesolutions in wood
Guide to Panels, Doors & Worktops
TimbmetAn IntroductionTimber Product Guide
ENGIN
EERED TIMBER (TEC
®)
Engineered Timber (TEC®) 10 | | 11Engineered Timber (TEC®)
Fire Retardant Treatment
www.timbmet.com
| 13 12 | | 13 12 |
www.timbmet.com
FinishingFIN
ISHING / FIRE RETARDAN
T TREATMEN
T
Priming, Lacquering and StainingWe have the ability to lacquer, paint, prime, sand and offer high performance fire retardant treatments from Arch Timber Protection.
We can work with your own designs or samples and replicate them for your final project specification.
Teknos Stain SystemThe Timbmet Teknos partnership offers Grandis Oak; combining the outstanding workability and durability of Timbmet’s exclusive FSC® certified 100% Red Grandis with Teknos’ aesthetic and protective Oak stain. A great Oak look available at a fraction of the cost.
Finishing Fire Retardant TreatmentTimbmet can also provide a wide range of finishing services to protect or colour your Timber.
Timbmet offer tried and trusted industrial fire retardant pressure treatments from Arch Timber Protection – DRICON, NON-COM Exterior and ATP Generic.
Benefits• Euroclass B or C ratings in accordance with EN 13501-1, with full Classification Reports available• DRICON Type HR (Humidity Resistant) treatment - the only BBA certified fire retardant treatment for Timber
and Panel products, providing an assured spread of fire protection for permanent construction situations in interior or weather protected applications
• ATP Generic Type DI (Dry Interior) treated boards for use in temporary constructions such as shop fitting and exhibition projects
• NON-COM Exterior fire retardant, a leach resistant, polymer based formulation which is approved Type LR (Leach Resistant) treatment and the only NHBC accepted fire retardant treatment for exterior cladding
• One of only two UK suppliers to stock an approved London Underground (LUL) branded DRICON fire retardant treated Plywood
• DRICON, NON-COM Exterior and ATP Generic industrially applied fire retardant treatments are independently proven
• Special contracts also undertaken to treat machined Timber and Panel products to exact fire retardant requirements
CNC MachiningFrom simple CNC jobs, to more intricate designs, Timbmet can help. If you’re not sure where to start, don’t worry; talk to our Technical Team and they’ll support you along the way.
Using our 3-axis CNC machine, our skilled team of operators can engrave patterns, images or text onto sheet materials. Every job is hand-finished, giving you a high quality result.
A wide variety of specifications are achievable. Maximum board size is 3050 x 1525mm.
| 15 14 |
www.timbmet.com
MAN
UFACTURING SERVICES FOR PAN
ELS
Manufacturing Services for Panels Manufacturing Services for Panels
Manufacturing Services for PanelsOver the last 70 years, we have established our range of Panel products, and today we are one of the UK’s leading stockists.We offer a number of manufacturing services to our Panel customers, including CNC, Cut-to-Size and Edge banding.
Whether it’s to support you where you don't have the facilities, or to provide additional resource such as helping you through holiday periods or times of high demand, Timbmet can help.
Panel Product RangeTimbmet are suppliers of a huge range of decorative Panels, including complete ranges of Egger and Kronospan. We are the exclusive UK supplier of Greenlam HPL and Compact Laminates and the biggest distributor of Veneered Boards in the UK.
In addition to decorative Panels, we stock a comprehensive range of MDF, Plywood, Chipboard and OSB products, including brands such as Medite, Finsa, Caber Pro and Spanolux.
For full details, visit www.timbmet.com
Wood, perfected
| 17 16 | | 17
www.timbmet.com
MAN
UFACTURING SERVICES FOR PAN
ELS
Manufacturing Services for Panels
Edging Service
Real Wood Edging✔ Pre-glued from stock, unglued to order✔ 0.6mm thickness from stock, up to 4mm to order✔ Widths to 50mm from stock (wider to order)✔ Available to match all Veneered Board stock species
In addition to our extensive range of Panel products and matching edging, we can also edge your decorative boards for you; saving you valuable time and effort.
✔ ABS, Melamine & Real Wood Edging applied✔ Solid lipping up to 5mm thick✔ Pre-mill, corner round, flush and radius chamfer✔ Different glue colours available
Roll lengths vary – please check at time of order.
Melamine Edging✔ Pre-glued✔ 0.3mm thick✔ 22mm width from stock
ABS Edging ✔ Unglued✔ 0.4, 0.8 and 2mm thicknesses✔ Widths to 54mm✔ Matching edging available for all Egger and Kronospan Melamine Board stock✔ Other decors available to order
Cut-to-Size ServiceUsing the latest optimisation and production software, our team will identify the most efficient cutting patterns for your final requirements, whatever Panel product you choose. This will minimise waste and reduce your costs and lead times.
We can also label each component from your cutting list:
• Dimensions• Job reference• Material• Description• Bar code• Special messages
16 | Manufacturing Services for Panels
Our Manufacturing team are happy to help with any queries
you have. Call them on 01865 860350 or email
For Enquiries
UK CoverageWhatever Manufacturing service your project demands, Timbmet’s UK-wide network can support you.
We give you the choice; place your order through any of our locations or, if you have a more complex enquiry, talk to our dedicated Technical team.
Timbmet can deliver your order, or you can collect from one of our depots. We’ll confirm your delivery date when you order, and if the pressure is on, we can work with you to meet tight deadlines.
Most of our depots have in-house Panels cutting facilities and our national delivery gives you access to resources across the Timbmet group, including our extensive Milling facilities in Glasgow and our Panels manufacturing based at Stonehouse.
| 19 18 | | 19 18 |
www.timbmet.com
RESPONSIBLE BUSIN
ESS / UK COVERAGE
UK CoverageResponsible Business
Timbmet are market leaders in our commitment to the sustainability and legality of our supply base and responsible business solutions.
We have been independently audited to ensure we are compliant with the European Timber Regulation (EUTR), both as an operator and a trader. Timbmet are members of the Timber Trade Federation (TTF) and have signed up to their Responsible Purchasing Process (RPP).
We fully support independent third party certification schemes of Timber products such as FSC® (Forest Stewardship Council®) and PEFC (Programme for Endorsement of Forest Certification) as the best way to demonstrate compliance with the EUTR and the RPP. We are committed to increasing the proportion of our purchasing that is certified. Where certification is not available we investigate the origin via a robust Due Diligence process.
Responsible Business
Timbmet operate in full compliance with the EUTR
Look for FSC® certified products.
Our Locations
Basildon (Essex) – Depot with Cut-to-Size Panel facilities
• Borehamwood (North London border) – Depot with Cut-to-Size Panel facilities
• Glasgow – Sales Office, plus Mill with full in-house service, including CAD facilities, Tool Room and Powermat Moulders
• Larkfield (Kent) – Depot
• Oxford – Head Office and Sales
• Poole (Dorset) – Depot with Cut-to-Size Panel facilities
Shellingford – Central Distribution Centre
Stonehouse (Gloucester) – Depot with on-site Panels manufacturing facilities including CNC, Cut-to-Size and Edge Banding
With extensive distribution and regional depots, office and field support, Timbmet provide exceptional customer service.For full contact details, see the back cover.
1
2
3
4
5
7
6
8
Timbmet... national coverage,
local service
12
3
4
57
6
8
8096 5/2016
Oxford Kemp HouseChawley ParkCumnor HillOxford OX2 9PHt: 01865 860350f: 01865 864367e: [email protected]
Glasgow235 Bogmoor RoadShieldhallGlasgow G51 4SHt: 0141 440 6600f: 0141 445 5736
Timbmet Globalt: +44(0) 1865 860392e: [email protected]
Head Offices / Sales
Cutting & Milling
Facilities
BasildonUnits B1/B2Hovefields AvenueBurnt Mills Industrial EstateBasildon SS13 1EBt: 01268 246800f: 01268 728442
BorehamwoodUnit 2 Manor PlaceManor WayBorehamwood WD6 1WGt: 020 8238 6930f: 020 8953 5781
Larkfield Units E1/E2 Larkfield Trading EstateNew Hythe LaneLarkfieldKent ME20 6SWt: 01622 718980f: 01622 719040
PooleUnit 4 Lion Works Industrial Estate543 Wallisdown Road Poole BH12 5ADt: 01202 531926f: 01202 537918
Shellingford (Distribution)White Horse Business ParkWare RoadStanford in the ValeOxfordshire SN7 8NY t: 01865 860350
Stonehouse14 Gloucester RoadStonehouse GL10 2PBt: 01453 826886f: 01453 828029
Local Depots and Distribution
Cutting Facilities
Cutting Facilities
Cutting Facilities
Cutting, Edging & CNC
Facilities
www.timbmet.com
Timbmet have a range of useful guides available for their other products.
To request a copy contact [email protected] or download at www.timbmet.com
TimbmetDoor Products Guide
Timbmet Veneered Board Range
solutions in wood
Guide to
Panels, Doors & Worktops
TimbmetAn Introduction Timber Product Guide Timbmet
Door Products GuideTimbmet Veneered Board Range
solutions in wood
Guide to
Panels, Doors & Worktops
TimbmetAn Introduction Timber Product Guide Flooring Product Guide
