Upload
chekusweku
View
89
Download
6
Embed Size (px)
Citation preview
Manual Lubrication Systems
PRO/MARK INDUSTRIALSDiv. R.D. Lewis Sales Limited
P.O. Box 26028, Cambridge, ON N1R 8E8 Phone 519 621-0479 Fax: 519 621-1972 E-Mail: [email protected]
Lubrication Systems & DevicesWeb Site: www.lubeonline.ca
Manual Lubrication Systems
PRO/MARK INDUSTRIALSDiv. R.D. Lewis Sales Limited
P.O. Box 26028, Cambridge, ON N1R 8E8 Phone 519 621-0479 Fax: 519 621-1972 E-Mail: [email protected]
Lubrication Systems & DevicesWeb Site: www.lubeonline.ca
REMOTE LUBE FITTING SYSTEMSTo easily reach hidden, inaccessible or hazardous bearings
Hard to reach lubrication fittings present a major maintenanceproblem on all types of machinery.
Hidden or guarded lubrication fittings are often the cause productiondown time.
High maintenance and operating costs are often directly traceableto poor lubrication fitting access.
Remote Manual Lubrication Systems* Easy access to lubrication fittings.* Quicker, Safer lubrication* Assurance that all bearings are lubricated.* Bearings can be lubricated while the machine is operating.* Reach hidden, inaccessible or hazardous bearings.
PRO/MARK INDUSTRIALSLubrication Systems & Devices Div. R.D. Lewis Sales LimitedP.O. Box 26028, Cambridge, Ont. N1R 8E8 Phone (519) 621-0479 (800) 263-9865 Fax. (519) 621-1972 E-mail: [email protected]
Web site: www.lubeonline.ca
HEAD FITTING
5/8"-18THREAD
1/8" NPT(F)1/8" NPT(F)
1/8" NPT(M)GREASE FITTING
2440471/4" TUBE X 1/8" NPT(M)QUICKLINC FITTING
NBR-4-062 1/4" O.D. NYLON TUBE2,000 PSI BURSTUSE UP TO 10 FT. WITH MANUALGREASE GUN OPERATION
244048 OR 2436991/4" TUBE X 1/8" NPT(M)
270784 ZERK LOCK FITTING1/8" NPT(F)LOCKS ON TO STANDARDGREASE FITTINGS
GREASE FITTING1/8" NPT(M)
1/8" NPT(F)1/8" NPT(F)
THREAD5/8"-18BULK HEAD FITTING1495B-A
246002 REUSEABLEHOSE FITTING 1/8" NPT(M) SWIVEL
HOSE FITTING 1/8" NPT(M) SWIVEL246002 REUSEABLE
252717 200 FT. 1/8" I.D.HOSE 4,000 PSI WORKING PRESSURE10,000 PSI BURST
GREASE FITTINGSLOCKS ON TO STANDARD1/8" NPT(F)270784 ZERK LOCK FITTING
200291/8" NPT(F) X 1/8" NPT(F)90* ELBOW
1495B-ABULK HEAD FITTING 5/8"-18
1/8" NPT(F)1/8" NPT(F)
1/8" NPT(M)GREASE FITTING
270784 ZERK LOCK FITTING1/8" NPT(F)LOCKS ON TO STANDARDGREASE FITTINGS
HT04-028 1/4" O.D. X .028 WALL HYD. STEEL TUBE
7205-4-2 (69068)1/4" TUBE X 1/8" NPT(M)
7405-4-2 (69079)1/4" TUBE X 1/8" NPT(M)90* ELBOW
THREAD
BULK HEAD FITTING1495B-A
The“Zerk-Lock grease fitting adapter permanently clamps to the head of any grease fitting including metric sizes.The adapter simplyfies the installation of remote plumbed tubes to the lube point. No need to worry about matchinggrease fitting thread sizes or struggling to remove difficult fittings.
1. Position Zerk-Lockover grease fitting.
2. Lock the Zerk-Lockonto the grease fittingusing a hammer and astaking tool–a 3/8”driftpunch or 3/8” diam. round bar.
3. Thread a tube fittingwith a 1/8” NPT male thread fully into theZerk-Lock
4. Install tube into tubefitting.
Clamp No. Tube Size.O.D. No. of Tubes A. B. C. Sugested Screw
Size64533-1 ¼” 1 ¼” 3/8” #6 x¼”64533-2 ¼” 2 15/16” ½” 3/8” #6 x¼”64533-3 ¼” 3 1 3/16” ¾” 3/8” #6 x¼”64533-4 ¼” 4 1 7/16” 1” 3/8” #6 x¼”
Clamp No. Tube Size.O.D. No. of Tubes A. B. Sugested Screw
Size360108 3/8” 1 3/8” ½” #10 x¼”
Clamp No.
241120 Spiral Wrap–20 ft.241054 7” Nylon ties (100 pkg.)241055 7” Nylon ties (50 pkg.)241056 7” Nylon ties (25 pkg.)274097 3/8”Convoluted Loom –20 ft.274098 1/2”Convoluted Loom –20 ft.274099 5/8”Convoluted Loom –20 ft.
Tube Clamps
For use with ¼”O.D. nylon and steel tube
For use with 252717 lubricant hose
PRO/MARK INDUSTRIALSLubrication Systems & Devices Div. R.D. Lewis Sales LimitedP.O. Box 26028, Cambridge, Ont. N1R 8E8 Phone (519) 621-0479 (800) 263-9865 Fax. (519) 621-1972 E-mail: [email protected]
Part No. Description
244047 ¼” Tube x 1/8” NPT(M) Straight Connector244048 ¼” Tube x 1/8” NPT(M) 90 Degree Elbow244053 ¼” Tube x ¼”-28 (M) 90 Degree Swivel Elbow244054 ¼” Tube x ¼”-28 90 Degree Elbow244055 ¼” Tube x ¼”-28 Straight Connector244058 ¼” Tube x ¼” Tube Splicer Union243699 ¼” Tube x 1/8” NPT(M) 90 Degree Swivel Elbow
TUBINGPart No. Description
NB-4-062 ¼” O.D. x .062 Wall Nylon Tube (500 psi working pressure–2,000 psi burst pressure62176 ¼” O.D. x .028 Wall Steel Tube–25 ft. coil (2,800 psi working pressure)
Feed Line Hose1/8” I.D. x 5/16”O.D. Polyurethane Cover hose (4,000 psi working pressure–10,000 psi burstpressure)
Part No. Length
252717 200 ft.241288 40 ft.
Quicklinc Installation Fittings
244047244048
244053 244054 244055
244058
243869
Installing lubrication systems can take a lot of time. Comparedto screw type fittings, Quicklinc, push-to-connect connectorssimplify and speed up the connection of lubrication points toremote mounted grease fittings.
246002 1/8” NPT(M) Field Installable Hose CouplingSwivel End for Installation Purposes
PRO/MARK INDUSTRIALSLubrication Systems & Devices Div. R.D. Lewis Sales LimitedP.O. Box 26028, Cambridge, Ont. N1R 8E8 Phone (519) 621-0479 (800) 263-9865 Fax. (519) 621-1972 E-mail: [email protected]
PRO/MARK INDUSTRIALSDiv. R.D. Lewis Sales Limited
P.O. BOX 26028, CAMBRIDGE, ONT. N1R 8E8 PHONE (519) 621-0479 FAX: (519) 621-1972 E-MAIL: [email protected]
Lubrication System and Devices
PRO/MARK INDUSTRIALSDiv. R.D. Lewis Sales Limited
P.O. BOX 26028, CAMBRIDGE, ONT. N1R 8E8 PHONE (519) 621-0479 FAX: (519) 621-1972 E-MAIL: [email protected]
Lubrication System and Devices