Manual HLR.pdf

(.;QMMAND DESCRIPTlON HGSUJ-1 1

2í190 82-CNT 238 0034 Uen B 1 1995-09-.21

1 Format

1.1 Command

{

MSISDN=msisdn ... l 1ALL} HGSDP: IMSisimsi.. . , :::: ;

CONNECTED LOC

1.2 Parameters

CONNECTED

IMSI=imsi

LOC

MSISDN=msis dn

SSDA

SUDA

2 Function

All subscriber data

Request ed data íor all connected subscribers .

Inter national Mobile Subscriber Identity

See Appl i c ation Information for

block HTRAN .

Subscriber location data

Mobile Station International PSTN/ISDN Number

See Applica~ion Information for

block HTRAN .

Permanent subscriber data and the supplementary service data (that is supplementary service re lated data).

Permanent subscriber data (that is data only changeable by the operator) .

Command HGSDP initiates printouts according to t h is table:

Parameter

ALL

SUDA

SSDA

LOC

Printouts

HLR SUBSCRIBER DATA. PERMANENT SUBSCRIBER DATA . SUPPLEMENTARY SERVICE DATA. LOCATION DATA.

HLR SUBSCRIBER DATA. PERMANENT SUBSCRIBER DATA .

HLR SOBSCRIBER DATA. PERMANENT SUBSCRIBER DATA . SUPPLEMENTARY SERVICE DATÁ .

HLR SUBSCRIBER DATA. LOCATION DATA.

COMMAND DESCRIPTION HGSDP 21'190 82-CNT 238 0034 Uen 81 1995-09-.21

This comrnand can be initiated from up to 16 IO devices simultaneously.

COMMAND DESCRIPTION HGSUP 31190 82-CNl 238 0037 Uen A1 1995-09-21

1 Format

1.1 Command

{

IMSI=imsi ... }

HGSUP: MSISDN=msisdn ... ;

CONNECTED

1.2 Parameters

CONNECTED

IMS:I=imsi

MSISDN=msisdn

2 Function

All mobile subscribers connected

International· Mobile Subscriber Identity

See Application Information for

block HTRAN .

Mobile Station International PSTN/ISDN Number


block HTRAN.

Command HGSUP initiates the printout HLR SOBSCRIPTION DATA .

This command can be initiated from up to sixteen !O devices simultaneously.

The order does not remain after system restart.

t,;OMMANO DESCRIPTION HGSUE 2/190 82-CNT 238 0037 Uen B 1 1995-09-21

1 Format

1.1 Command

HGSUE:MSISDN=msisdn;

1.2 Parameters

2

MSISDN=msisdn

Function

Mobile Stati on International PSTN /ISDN Number


block HTRAN .

Command HGSUE ends the subscription of a mobile subscriber.

This command can be initiated from up to 16 IO devices simultaneously .

The arder remains after system restart.

COMMAND DESCRIPTION HGSUI 1/190 82-CNT 238 0037 Uen 82 1995-09-Ll

1 Format

1.1 Command

HGSUI:IMSI=irnsi,MSISDN=rnsisdn[,PROFILE=profile];

1.2 Parameters

2

IMSI=imsi

MSISDN=msisdn

l?ROFILE=profila

Function

International Mobile Subscriber Identity

See Application Inforrnation for

block HTRAN .

Mobile Station International PSTN/ISDN Ntunber

See Application Inforrnation for

block HTRAN .

Subscriber profile

Numeral O - 255

Command HGSOI initiates the subscription of a new rnobile subscriber in the HLR.

At subscription, a set of subscriber data is given to the subscriber by means of a profile.

If no profile is given in the cornrnand, profile O will be

used as default.

The location of the new rnobile subscriber is set to unknown.

This cornrnand also initiates a request for authentication

data frorn an external authentication centre.

An exchange parameter determines whether the comm.and wai ts

for the result of the authentication data request or not.

The fault cedes relating to authentication data only apply

when this parameter is set.

This command can be initiated frorn up to 16 IO devices s imul taneous 1 y.

The order remains after systern restart.

GOMMAND DESCRIPTION HGSOC 1/190 82-CNT 238 0034 Uen 82 1995-09-21

1 Format

1.1 Command

{

SUD=sud } HGSDC:MSISDN=msisdn, ;

PROFILE=profile

1.2 Parameters

2

MSISDN=msisdn

PROFILE=profile

SUD• sud

Function

Mobile Station International PSTN/ISDN Number.


block HTRAN.

Subscriber profile

Nwneral O - 255

Subscriber data

Expressed as a-b where:

a is an identifier

b is a numeral 0-65535. See Application Information for

block HTRAN.

Command HGSDC changes subscriber data, specifying data to be changed (SUD), ora set of data previously defined (PROE'ILE).

Provision of a supplementary service already provided,

will cause the supplementary service to be deactivated

and erased.

Subscription to an already subscribed Basic Service will

not cause any change in the corresponding Supplementary

Services data unless it is got by means of a profile.

When a new Basic Service is subscribed and the corresponding Basic Service Group has not previously got any basic service subscribed to, the provision status of the supplementary services will be inherited.

The activation/registration status will be inherited only

for those supplementary services that are activated as a

cOMMAND DESCRIPTION HGSDL 2 11190 62-CNT 238 0034 Uen 82 i995-09-2·t

When a new Basic Service is subscribed and the corresponding Basic Service Group has previously got any basic service .subscribed t0, r::he provision and activat1ontreg1st.ration status of all the supplementary se.rvj~es will h~ inha~i~Prl from the previously subscribed basic sen· ices.

This command can be initiated from up to 16 IO devices simul taneously.

The arder rernains after system restart.

APPLICATION INFORMATION HTRAN 2115518-CNT 238 0047 Uen L 1996-12-11

2 Data

2.1 Subscriber Data

Command Parameter

IMSI

NIMSI

MSISDN

AMSISDN

SS

SUD

BS

BSG

CHAR

Value Range

6C-15C

6C-15C

5C-15C

5C-15C

2C-6C

Se e description

2C-6C

2C-6C

3C-8C

Description

International Mobile Subscriber Identity Contains decimal digits.

New IMSI number Contains decimal digits.

Mobile Station International PSTN ISDN number contains decimal digits.

Additional MSISDN Contains decimal digits.

Supplementary Service identifier Consists of a string

(see table 1).

Subscriber Data Expressed as a-b where: a Identifier

2 - 6 characters. b Numeral

o - 65535. (se e table 2)

Basic Service identifier Consists of a string

(se e table 3)

Bas i c Service Group identifier Consists of a string

(se e table 4)

Roaming area characteristic identifier Consists of a string

(see table 5) •

Table 1: Supplementary Service (SS) identifiers

String

ALLSS BAC BAIC BAOC BIC BICRO

BOC BOIC BOIEXH

CAW CCFS CFB CFNRC CFNRY CFS

Meaning

ALL SUPPLEMENTARY SERVICES ALL CALL RESTRICTION SERVICES BARRING OF ALL INCOMING CALLS BARRING OF ALL OUTGOING CALLS BARRING OF INCOMING CALLS BARRING OF ALL INCOMING CALLS WHEN ROAMING OUTSIDE THE HOME PLMN COUNTRY BARRING OF OUTGOING CALLS BARRING OF ALL OUTGOING INTERNATIONAL CALLS BARRING OF ALL OUTGOING INTERNATIONAL CALLS EXCEPT THOSE DIRECTED TO THE HOME PLMN COUNTRY CALL WAITING ALL CONDITIONAL FORWARDING SERVICES CALL FORWARDING ON MOBILE SUBSCRIBER BUSY CALL FORWARDING ON MOBILE SUBSCRIBER NOT REACHABLE CALL FORWARDING ON NO REPLY ALL FORWARDING SERVICES

Action

o O A/0/P A/0/P o A/0/P

O A/0/P A/D/P

A/D/P R/A!E/D R/A/E/0/P R/A/E/0/P R/A/E/0/P R/A/E/0

.·

APPLICATION INFORMATION HTRAN 2/15518-CNT 238 0047 Uen L 1996-12-11

2

crs CFU DCF SI?N

ALL FORWARDING SERVICES CALL FORWARDING UNCONDITIONAL DEFAULT CALL FORWARDING SI NGLE PERSONAL NUMBER

P = This .st r i ng c:~.n be •.ls ed. in the cornmanr:t HGSSI t;<)

registe r a Stipplementary Service . A This string can be used in the command HGSSI to

activate a Supplementary Service. E This string can be used in the command HGSSE to

erase a Supplementary Service. D This string can be used in the cornmand HGSSE to

deactivate a Supplementary Service. P This string can appear in the printout ini tiated

by command HGSDP (SUPPLEMEÑTARY SERVICE DATA ) .

R/A/E/0 R/A/E/0/P R/E/P R/E/P

The Supplementary Services AOC, CLIP, CLIR, COLP, COLR, CUG, HOLD, ICI, MPTY, OIN, TI N, OICK and TICK cannot be used asan argument of command parameter SS. They are used as an argument of command parameter SUD except for CUG (see table 2).

When a certain Supplementary Service is not supported by the system the corresponding string will not be recognized by it.

SSs are only printed (Printout SUPPLEMENTARY SERVICE DATA) if the Supplementary Service has been provided.

Table 2: Subscriber Data (SUD)

String

AOC

BAIC

BAOC

BICRO

BOIC

BOIEXH

Meaning Value Range

ADVICE OF CHARGE 0-2 O - Advice of charge not provided 1 Advice of charge information

• provided 2 = Advice of charge charging

provided BARRING OF ALL INCOMING CALLS 0-1

O - not provided 1 .. provided ·

BARRING OF ALL OUTGOING CALLS 0-1 O - not provided 1 =- provided

BARRING OF ALL INCOMING CALLS WHEN ROAMING 0-1 OOTSIDE THE HOME I?LMN COUNTRY

O • not provided 1 • provided

BARRING OF ALL OUTGOING INTERNATIONAL CALLS 0-1 O • not provided l .. provided

BARRING OF ALL OOTGOING INTERNATIONAL CALLS 0-1 EXCEPT THOSE DIRECTED TO THE HOME PLMN COUNTRY

O .. not provided 1 • provided

L This string can be used in the command HGLIP to print conditional list printout, and can appear in its printout (HLR CONDITIONAL SUBSCRIBER LIST) .

p .. This string can be used in the command HGSPC to change profile data, and can also appear in the printout initiated by command HGSPP (HLR SUBSCRIBER PROFILE DATA) .

S This s tring can be used in the command HGSOC to change Subscribe r Data.

o = This string can appear in the printout initiated by c ommand HGSDP (PERMANENT SUBSCRIBER DATA).

Table 2 (contin . ) : Subscr i ber Da t a (SUD)

String Mea ning Value

Action

L/P/S/0

L/P/S/0

L/P/S/0

L/1?/S/0

L/P/S/0

L/P/S/D

Ac tion

API-'Ltl.A liON INF-ORMA f liJN Hl RAN 21155 18-CNT 2.38 01.)4 7 U en L '1996- LH 1

BS21

BS22

BS23

BS24

BS25

BS26

Range

BEARER SERVICE "DATA CIRCUIT 0-1 A3tNCl1RONOUS :j!JO b/s"

o e not sub!lcribed 1 = subscribed

SEARER SERVICE "DATA CIRCO l 'I' 0-l ASYNCHRONOUS 1200 b/s"

O = not subscribed 1 "' subscribed

BEARER SERVICE "DATA CIRCOIT 0-1 ASYNCHRONOUS 1200-75 b/s"

O - not subscribed 1 - subscribed

BEARER SERVICE "DATA CIRCUIT · 0-1 ASYNCHRONOUS 2400 b/s "

O ~ not subscribed 1 :z subscribed

BEARER SERVICE " DATA CIRCUIT 0-1 ASYNCHRONOOS 4800 b/s"

O = not subscribed 1 = subscribed

BEARER SERVICE " DATA CIRCOIT 0-1 ASYNCHRONOUS 9600 b/s "

O ~ not subscribed 1 = subscribed

L This string can be used in the command HGLIP to print conditional list printout, and can appear in its printout (HLR CONDITIONAL SOBSCRIBER LIST).

P This string can be used in the command HGSPC to cbange profile data, and can also appear in the printout initiated by command HGSPP (HLR SOBSCRIBER PROFILE DATA) .

S = This string can be used in the command HGSDC to change Subscriber Data.

O ~ This string can appear in the printout initiated by command HGSDP (PERMANENT SUBSCRIBER DATA).

Table 2 (contin.): Subscriber Data (SUD)

String

BS31

BS32

6533

BS34

CAPL

Meaning

BEARER SERVICE "DATA CIRCUIT SYNCHRONOUS 1200 b/s"

O - not subscribed 1 - subscribed

BEARER SERVICE "DATA CIRCUIT SYNCHRONOUS 2400 b/s "

O = not subscribed 1 "' subscribed

BEARER SERVICE "DATA CIRCUIT SYNCHRONOUS 4800 b/s"

o a not subscribed 1 = subscribed

BEARER SERVICE " DATA CIRCUIT SYNCHRONOUS 9600 b/s"

O • not subscribed 1 = subscribed

CRANNEL ALLOCATION PRIORITY LEVEL O = no priority leve! assigned

1-14 = priority level (highest priority 1evel = 1) (lowest priority level = 14)

15 = priority level not used

Value Range

0-1

0-1

0-1

0-1

0-15


P = This string can be used in the command HGSPC

L/P/S/0

L/P/S/D

L/P/S/D

L/P/S/D

L/P/S/D

L/P/S/0

Action

L/P/S/0

L/P/S/D

L/P/S/0

L/P/S/D

L/P/S/D

APPLICA llON INFURMA TION HTRAN 2/155 18-Cf\!T 238 004 7 U en L 199tl-1 :l-1"1

4

P ~ This str~ng can be used in the command HGSPC to change profile data, and can also appear in the printout initiated by command HGSPP {HLR SUBSCRIBER PROFILE DATA) .

6 = 'I'!ns s t: :t: ing' can be usEOd ln thE. C•)ll1I'Cland HGSDC to change Subscriber Data.

D This string ~an appear in the printout initiated hy command HGSDP IPERMANENT SUBSCRIBER DATA).


String

CAT

CAW

CFB

Meaning

SUBSCRIBER CATEGORY O Calling party is unknown at

this time 1 Operator, language French 2 Operator, language English 3 • Operator, language German 4 a Operator, language Russian 5 Operator, language Spanish 6 Available to administrations for

selecting a particular language by mutual agreement

7 • Available to administrations for selecting a particular language by mutual agreernent

8 - Available to administrations for selecting a particular language by mutual agreernent

9 - Reserved 10 - Ordinary calling subscriber 11 a Calling subscriber with priority 12 - Data ca11 (volee band data) 13 • Test call 14 - Not used

46_

2215

3 Payphone

1 = Not used 224-Í54 a National use

255 - Not used CALL WAITING

O • not provided 1 ., provided

CALL FORWARDING ON MOBILE SUBSCRIBER BUSY O • not provided 1 • provided

Value Range

0-255

0-1

0-1

L This string can be used in the comrnand HGLIP to print conditional list printout , and can appear in its printout (HLR CONDITIONAL SUBSCRIBER LIST) .

P This string can be used in the comrnand HGSPC to change profile data, and can also appear in the printout initiated by cornrnand HGSPP (HLR SUBSCRIBER PROFILE DATA) .

S This string can be used in the command HGSDC to change Subscriber Data.

D This string can appear in the printout initiated by command HGSDP (PERMANENT SOBSCRIBER DATA).


String

CFNRC

CFNRY

Meaning

CALL FORWARDING ON MOBILE SUBSCRIBER NOT REACHABLE

O .. nat provided 1 = provided

CALL FORWARDING ON NO REPLY O "' not provided 1 .. provided

Value Range

0-1

0-1

Action

L/P/S/D

L/P/S/D

L/P/S/0

Action

L/P/S/D

L/P/S/D

APPLICATION INFORMATION HTRAN 2/155 18-CNT 238 0047 Uen L 1996-12-11

5

CFU

CLIR

COLP

COLR

CUG

D85G

CALL FORWARDING UNCONDITIONAL 0-1 L/P/5/D O = not provided 1 = provided

r:'Jl.!.,U:"NG t.INE IDE.NTIFICAT!'iN PBESEt-ITA'~'ION 0-1 L/P/S/f:o O = not provided 1 = provided

CALLING LINE IDENTIFICATION RE5TRICTION 0-1 L/P/S/D O = not ptovided 1 = provided

CONNECTED LINE IDENTIFICATION PRE5ENTATION 0-1 L/P/5/D O = not provided 1 = provided

CONNECTED LINE IDENTIFICATION RE5TRICTION 0-1 L/P/5/D O "" not provided 1 = provided

CL05ED U5ER GROOP 0-1 L/0 O = not provided 1 = provided

DEFAULT BA5IC 5ERVICE GROUP 1-6 L/P/5/D 1 = Al1 5peech Transmission 5ervices (T510) 2 = Not used. 3 = All Facsimi1e Transmission Services (TS60) 4 = Not used. S = Al1 Data Circuit Asynchronous 5ervices (8520) 6 = All Data Circuit Synchronous 5ervices (8530)

L This string can be used in the co.mmand HGLIP to print conditional 1ist printout, and can appear in its printout

(HLR CONDITIONAL 5UBSCRIBER LI5T). P • This string can be used in the command HGSPC

to changa profile data, and can also appear in the printout initiated by command HGSPP (HLR SOBSCRIBER PROFILE DATA).

S - This string can be used in the command HGSDC to change Subscriber Data.

O • This string can appear in the printout initiated by command HGSDP

• (PERMANENT SOBSCRIBER DATA).

Table 2 (contin.): Subscriber Data (SOD)

String

DCF

HOLD

ICI

MPTY

OBA

OBI

Meaning

DEFAOLT CALL FORWARDING O = not registered 1 = registered

CALL ROLO O = not provided 1 = provided

IMMEDIATE CALL ITEMIZATION O = not provided 1 = provided

MULTIPARTY SERVICE O = not provided 1 = provided

OPERATOR DETERMINED BARRING OF ALL INCOMING ANO OUTGOING CALLS

O = No operator barring of any call, active (in this case the va1ue of 08! as well as OBO must be set to 0)

1 Operator barring of al1 calls, active (in this case the value of OBI as we11 as 080 must be set to 1)

OPERATOR DETERMINED BARRING OF ALL INCOMING CALLS

O not active 1 Operator determinad barring of

all incoming cal1s, active 2 Operator determinad barring of

Value Action Ranga

0-1 L

0-1 L/P/S/0

0-1 L/P/S/0

0-1 L/P/S/0

0-1 S

0-2 L/P/S/0

..

APPLICATION INFORMATION HTRAN 21155 18-CNT 238 0047 Uen L 1996-12-11

6

all inceming calls when reaming eutside heme PLMN ceuntry, active

L This string can be used in the cemmand HGLIP te print cenditienal list printeut, and can appear in its printout (HLR CONDITIONAL SUBSCRIBER LIST) .

P This string can be used in the cemmand HGSPC te change prefile data, and can alse appear in the printeut initiated by cernmand HGSPP (HLR SUBSCRIBER PROFILE DATA).

S This string can be used in the cemmand HGSDC te change Subscriber Data.

o This string can appear in the printeut initiated by cemmand HGSDP (PERMAN~NT SUBSCRIBER DATA}.

Table 2 (centin.): Subscriber Data (SUD)

String

080

OBOPRE

OBOPRI

OBSSM

0581

Meaning Value Range

OPERATOR DETERMlNED BARRING OF ALL OUTGOING 0-4 CALLS

O .. net active 1 Operater determined barring ef

all eutgeing calls, active 2 - Operater determinad barring ef

all eutgeing internat~enal calls, active ·

3 • Operater determinad barring ef all eutgeing internatienal calls except fer these directed te heme PLMN ceuntry, active

4 - Operater determinad barring ef all outgeing calls when roaming outside home PLMN ceuntry, active

OfitRATOR DETERMINED BARRING OF OUTGOING 0-1 PREMIUM RATE CALLS (ENTERTAINMENT)

O • net active 1 = active

OPERATOR DETERMINED BARRING OF OUTGOING 0-1 PREMIUM RATE CALLS (INFORMATION)

O .. net active 1 - active

OPERATOR DETERMINED BARRING OF 0-1 SUPPLEMENTARY SERVICES MANAGEMENT

O • net active 1 • active

WHEN REGISTERED IN THE HPLMN, OPERATOR SPECIFIC BARRING (TYPE 1)

O - net active 1 = active

0-1

Actien

L/P/5/D

L/P/S/D

L/P/S/D

L/P/S/D

L/P/S/D

L This string can be used in the cemmand HGLIP te print conditienal list printeut, and can appear in its printeut (HLR CONDITIONAL SUBSCRIBER LIST) .

P This string can be used in the cemmand HGSPC to change prefile data, and can alse appear in the printeut initiated by cemmand HGSPP

(RLR SUBSCRIBER PROFILE DATA} . S This string can be used in the cemmand HGSDC te

change Subscriber Data . O = This string can appear in the printeut initiated

by command HGSD (PERMANENT SUBSCRIBER DATA).

Table 2 (centin.): Subscriber Data (SUD)

String

OSB2

Meaning

WHEN REGISTERED IN THE HPLMN, OPERATOR SPECIFIC BARRING (TYPE 2)

Value Range

0-1

Actien

L/P/5/D

APPLICATJON INFORMATION HTRAN :U15518-t.;N1 238 0047 Uen L 1996-12-11

7

OSB3

OSB4

OBR

OFA

OICK

O = not active 1 = active

WHEN REGISTERED IN THE HPLMN, 0-1 vPERATOR SPECIFIC BARRING CTYPE : ¡


WHEN REGISTERED IN THE liPLMN , O ·1 OPERATOR SPECIFIC BARRING (TYPE 4)


OPERATOR DETERMINED BARRING OF ROAMING 0-2 O = not active 1 = Operator determinad barring when

roaming outside home PLMN, active 2 Operator dete~ined barring when

roaming out~ide horne PLMN country active

ORIGIN FOR FORWARDED-TO NUMBER ANALYSIS 0-511 O = Used for international numbers

1-511 = Used for national numbers ORIGINATING INTELLIGENT NETWORK 0-999 CATEGORY KEY

O = not provided 1-999 = provided

L/P/S/0

L/P/S/0

L/P/S/0

L/P/S/0

L/P/S/0

L This string can be used in the comrnand HGLIP to print conditional list printout, and can appear in its printout {HLR CONDITIONAL SUBSCRIBER LIST).

P - This string can be used in the command HGSPC to change profi1e data, and can also appear in the printout initiated by cornmand HGSPP {HLR SUBSCRIBER PROFILE DATA) .

S This string can be used in the comrnand HGSDC to change Subscriber Data .

O • This s.tring can appear in the printout initiated . by command HGSDP {PERMANENT SUBSCRIBER DATA).

Table 2 (co~in.): Subscriber Data {SUD)

String

OIN

PICI

PWD

REGSER

SOCB

Meaning

ORIGINATING INTELLIGENT NETWORK O = not provided 1 .. provided

PRIMARY INTER-EXCHANGE CARRIER IDENTIFIER O no prirnary inter-exchange

carrier assigned 1-255 = primary inter-exchange carrier

identifier SOBSCRIBER PASSWORD

REGIONAL SERVICES O = not provided

1-16383 = zone code set nurnber SOBSCRIPTION OPTION CONTROL OF BARRING SERVICES

o 1

by the operator by the operator and the rnobile subscriber (using password)

2 = only operator due to unsupported services (see note 1)

3 only operator due to password blocked (see note 2)

Va1ue Range

0-1

0-255

0-9999

0-16383

0-1 0-3

L • This string can be used in the cornrnand HGLIP to print conditional list printout, and can appear in its printout (HLR CONDITIONAL SUBSCRIBER LIST) .

P e This string can be used in the command HGSPC to change profile data, and can also appear in the printout initiated by command HGSPP (HLR SUBSCRIBER PROFILE DATA) .

Action

L/P/S/0

L/P/S/0

L/S/D

L/S/D

L/P/S o

APPLICATION INFORMATION HTRAN 2/1 55 18-CNT 238 004 7 U en L 1996-12-1 1

8

S

D

1

2

This string can be used i n the command HGSDC to change Subscriber Data . This string can appear in the printout initiated b:r· cornmand HGSD!? 'PERM.U.NENT SOBSCPISER DATA} .

This value may be set automatically when the subscriber is located in a MSCNLR which does not support a service. The previous value is recovered when the cause which provokes it is ended.

This value may be set automatically when the password is blocked by the subscriber. The previous value is recovered when the password is unblocked by the operator

Table 2 (contin.): Subsc riber Data (SUD)

String

SOCFB

SOCFRC

SOCFRY

Me aning Value Action Range

SUBSCRIPTION OPTI ON CALL FORWARDING ON MOBILE SOBSCRIBER BUSY

O = No notification to calling nor to served subscribe r s when the call i s forwarded

1 • Only calling subscriber is notifi ed when the c a ll is forwarded

2 ~ Only served subscriber is notified when the call is forwa rded

3 • Both , calling and served subscr ibers are notified when the ca l l is forwarded

SUBSCRIPTION OPTION CALL FORWARDING ON MOBILE SUBSCRIBER NOT REACHABLE

O - No notification to calling subscriber when the call is forwarded

1 - Notification to calling subscr iber when the call is forwarded

SUBSCRIPTION OPTION CALL FORWARDING ON NO REPLY

O = No notification to calling nor to served subscribers when the call is forwarded

1 - Only calling subscriber is notified when the call is forwarded

2 Only served subscriber is not i fied when the call is forwarded

3 Both , calling and served subscribers are notified when the call is forwarded

L = This string can be used in the command HGLIP to print conditional list printout, and can appear in its pr i ntout (HLR CONDITIONAL SUBSCRIBER LIST) .

P = This string can be used in the command HGSPC to change profile data, and can also appear in the printout initiated

0-3 L/P/S/D

0- 1 1/P/S/D

0-3 L/P/S/D

by command HGSPP (HLR SUBSCRIBER PROFILE DATA ) . S Th i s string can be used in the command

AGSDC to change Subscriber Data. O This string can appear in the pr i ntout

initiated by command HGSDP (PERMANENT SUBSCRIBER DATA)


APPLICATION INFORMATION HTRAN 21155 18-CNT 238 0047 Uen L 1996-12-11

9

String

SOCFU

SOCLIP

SOCLIR

SOCOLP

SODCF

Meaning Value Range

SUBSCRIPTION OPTION CALL FORWARDING 0 -1 UNCONDI'T'JONAL

O - No notification to calling subscriber when the call is forwarded

• 1 ~ Notification to calling subscriber when the call is forwarded

SUBSCRIPTION OPTION CALLING LINE 0-1 IDENTIFICATION PRESENTATION

, O • without override category 1 • with override category

SUBSCRIPTION OPTION CALLING LINE 0-2 IDENTIFICATION RESTRICTION

• O ~ permanent mode 1 = temporary mode, presentation

restricted 2 = temporary mode, presentation

allowed SOBSCRIPTION OPTION CONNECTED LINE 0-1 IDENTIFICATION PRESENTATION

O - without override category 1 • with override category

SUBSCRIPTION OPTION FOR NOTIFICATION 0-3 OF DEFAULT CALL FORWARDING

O - No notification to calling nor to served subscribers when the call is forwarded

1 • Notification to calling subscriber when the call is forwarded

2 Notification to served subscriber when the call is forwarded

3 = Notification to both , calling and served subscribers when the call is forwarded

Action

L /P/S/0

L/P/S/D

L/P/S/0

L/P/S/D

L/P/S/0

L - This string can be used in the command HGLIP to print conditional list printout, and can appear in its printout (HLR CONDITIONAL SUBSCRIBER LIST) .

P = This string can be used in the command HGSPC to change profile data, and can also appear in the printout initiated by command HGSPP (HLR SUBSCRIBER PROFILE DATA) .


O This string can appear in the printout initiated by command HGSDP (PERMANENT SUBSCRIBER DATA).


String

SOSDCF

Meaning

SUBSCRIPTION OPTION FOR SPECIFICATION OF FORWARDING CONDITIONS FOR DCF SUPPLEMENT~~y SERVICE

1 When the called mobile subscriber is busy

3

2 = When the called mobile subscriber does not reply When the called mobile subscriber is busy and does not reply

4

5

When the called mobile subscriber is not reachable When the called mobile subscriber is busy and not reachable

6 = When the called mobile subscriber is not reachable and does not reply

Value Range

1-7

Action

L/P/S/0

.·

APPLICATION INFORMAfiON HTRAN 2/155 18-CNT 238 004., Uen L 1996-12-11

10

SPt'

STYPE.

TIN

TICK

•7 = When the cal1ed mobile subscriber is busy, not reachable and does not rep1y

~:!:~G!.F: PSRSONAL NUMBE? O • not registered 1 = reg1stered

SUBSCRIPTION TYPE O = not provided

1-127 • provided TERMINATING INTELLIGENT NETWORK

O - not provided 1 .. provided

TERMINATING INTELLIGENT NETWORK CATEGORY KEY

O = not provided 1-999 ~ provided

(l-1

0-121 L/ PIS/U

0-1 L/P/S/D

0-999 L/P/S/D


P This string can be used in the cornmand HGSPC to change profile data, and can also appear in the printout initiated by command HGSPP (HLR SUBSCRIBER PROFILE DATA) .


D This string can appear in the printout initiated by cornmand HGSDP (PERMANENT SUBSCRIBER DATA).


String

TSll

TS21

TS22

TS61

TS62

TSD1

Meaning Value Range

TELESERVICE "TELEPHONY" 0-1 O - not subscribed 1 - subscribed

TELESERVICE "SHORT MESSAGE MT/PP" 0-1 O = not subscribed 1 = subscribed

TELESERVICE "SHORT MESSAGE MO/PP" 0-1 O • not subscribed 1 .. subscribed

TELESERVICE "ALTERNATE SI?EECH ANO FACSIMILE 0-1 GROUP 3"

O • not subscribed 1 - subscribed

TELESERVICE "AUTOMATIC FACSIMILE GROOP 3" 0-1 o e not subscribed 1 = subscribed

TELESERVICE "AUXILIARY TELEPHONY" 0-1 O = not subscribed 1 = subscribed

Action

L/P/S/0

L/P/S/0

L/P/S/0

L/P/S/D

L/P/S/D

L/D

L This string can be used in the cornmand HGLIP to print conditional list printout, and can appear in its printout (HLR CONDITIONAL SUBSCRIBER LIST).

P This string can be used in the command HGSPC to change profile data, and can also appear in the printout initiated by cornmand HGSPI? (HLR SUBSCRIBER I?ROFILE DATA).

S = This string can be used in the comrnand HGSDC to change Subscriber Data.

D = This string can appear in the printout initiated by command HGSDP (PERMANENT SOBSCRIBER DATA).

When a certain Subscriber Data is not supported by the system the corresponding string will not be recognized by it.

SUDs for Basic Services, Supplementary Services, Operator Determined Barring, Regional Services, Channel Allocation Priority Level, Primary lnter-Exchange Carrier ldentifier and Subscription Type are only printed (Printouts HLR SUBSCRIBER PROFILE

APPLICATION INFORMATION HTRAN 21155 18-CNT 238 004 7 U en L 1996-12-11

11

DATA and PERMANENT SUBSCRIBER DATA) ifthe value for these SUDs is different from O.

Subscription options for Supplementary Services are only printed (Printouts HLR SUBSCRIBER PROFILE DATA and PERMANENT SUBSCRIBER DATA) if the Supplementary Service has been provided.

When the SS is not provided, although the change of the relatad subscription option is accepted by commands HGSDC and HGSPC, the new value will not be relevant until the service is provided.

Table 3: 5tring

8521 8522 8523 8524 8525 8526 8531 8532 8533 8534 TSll T521 TS22 T561 T562 T5D1

Basic 5ervice (BS) identifiers Meaning

BEARER 5ERVICE "DATA CIRCUIT ASYNCHRONOUS 300 b/s " BEARER 5ERVICE "DATA CIRCUIT A5YNCHRON005 1200 b/s" BEARER SER VICE "DATA CIRCOIT ASYNCHRONOUS 1200-75 b/s" BEARER SERVICE "DATA CIRCUIT ASYNCHRONOOS 2400 b/s" BEARER 5ERVICE "DATA CIRCOIT ASYNCRRONOU5 4800 b/s" BEARER SER VICE "DATA CIRCUIT ASYNCHRONOUS 9600 b/s" BEARER SERVICE "DATA CIRCUIT SYNCHRONOUS 1200 b/s" BEARER SERVICE "DATA CIRCUIT 5YNCHRONOU5 2400 b/s" BEARER SER VICE "DATA CIRCUIT SYNCHRONOOS 4800 b/s " BEARER 5ERVICE "DATA CIRCUIT 5YNCHRONOU5 9600 b/s " TELE5ERVICE "TELEPHONY" TELE5ERVICE "5HORT MES5AGE MT/PP" TELE5ERVICE "SHORT MESSAGE MO/PP" TELE5ERVICE "ALTERNATE SPEECH ANO FACSIMILE TELE5ERVICE "AUTOMATIC FACSIMILE GROUP 3" TELE5ERVICE "AUXILIARY TELEPHONY"

P = This string can be used in the cornmand . HGBDP, to print the bearer capability data, and can appear in its printout (HLR G5M-BEARER CAPABILITY DATA) .

D This string can appear in the printout initiated by command HGSDP (PERMANENT 5UB5CRI8ER DATA).

GROOP 3"

Action

P/0 P/0 P/D P/D P/0 P/D P/D P/D P/D P/D P/D PID P/D P/D P/D P/D

When a certain Basic Service (Bearer Service!Teleservice) is not supported by the system the corresponding string will not be recognized by it.

BSs are only printed (Printout PERMANENT SUBSCRIBER DATA) if the Basic Service (Bearer Service/Teleservice) is subscribed.

Table 4: Basic 5ervice Group (8SG) identifiers

5tring

ALLA5 ALL8E5 ALLDCA ALLDC5 ALLDT5 ALL5YS ALLTS 8520 8530 TSlO TS20 T560 TSDO TSEXSM

Meaning

ALL DATA ASYNCHRONOUS SERVI CE5 ALL 8EARER 5ERVICES ALL DATA CIRCUIT ASYNCHRONOUS SERVICES ALL DATA CIRCUIT SYNCHRONOUS SERVICE5 ALL DATA TELESERVICES ALL DATA SYNCHRONOUS SERVICES ALL TELESERVICES ALL DATA CIRCUIT ASYNCHRONOUS SERVICES ALL DATA CIRCUIT SYNCHRONOUS SERVICES ALL SPEECH TRANSMISSION SERVICES ALL SHORT MESSAGE 5ERVICES ALL FACSIMILE TRAN5MISSION SERVICES AOXILIARY 5PEECH SERVICE5 ALL DATA TELE5ERVICE5 EXCEPT SHORT MES5AGE SERVICES

I - This string can be used in the command HGSSI to initiate a Supplementary Service.

E - This string can be used in the command HG5SE to end a Supplementary Service.

Action

I/E I/E I/E I/E I/E I/E I/E I/E/P/C I/E/P/C I/E/P/C I/E/P I/E/P/C I/E/P/ C I/E

APPLICATION INFORMATION HTRAN 2/155 18-CNT 238 004 7 U en L 1996-12-11

P = This string can appear in the printout initiated by command HGSDP (SUPPLEMENTARY SERVICE DATA).

e ~ This string can be used in the commands HGCUI, HGCUC , and HGCSC and can appear ir. the printout initiated by commands HGCSP {HLR CLOSED USER GROUP BASIC SERVICE GROUP OPTIONS DATA) and HGCUP {HLR CLOSED USER GROUP DATA) when the CUG functionality is available.

When a certain Basic Service Group is not supported by the system the corresponding string will not be recognized by it

Table of applicability of SS to Basic Service Groups when using commands HGSSI and HGSSE:

BASIC SERVICE GROUPS

SS 6 5 4 3 2 1

BAIC X X X X X X

BAOC X X X X X X

BIC-Roam X X X X X X

BOIC X X X X X X

BOIC-exCH X X X X X X

CFU X X X X X

CFB X X X X X

CFNRC X X X X X

CFNRY X X X X X

cw X X X X X

SPN X

DCF X X X X X ( X --> applies )

The Supplementary Services AOC, CLIP, CUR, COLP, COLR, CUG, HOLD, ICI, MPTY, OIN , TIN, OICK and TICK are not used in the commands HGSSI and HGSSE.

Basic Service Groups correspondence

1 = TSlO 2 TS20 3 TS60 4 TSDO 5 BS20 6 BS30

(All Speech Transmission Services) (All Short Message Services) (All Facsímile Transmission Services) (Auxiliary Speech Services) {All Data Circuit Asynchronous Services) (All Data Circuit Synchronous Services)

Table 5: Roaming area characteristic (CHAR)

String

AOCC

ROAMREST TRAFFV2 RSERV

OLDHLIDR

Meaning

ADVICE OF CHARGE (CHARGING) SOPPORTED (see note 1) ROAMING RESTRICTED IN THIS PLMN TRAFFIC WITH MAPV2 ALLOWED ROAMING ALLOWED WHEN THE REGIONAL SERVICES ARE NOT SUPPORTED OLD HANDLING FOR LINE IDENTIFICATION RESTRICTION SERVICES (see note 2)

I This string can be used in the command HGRCI

Action

I/E/P

I/E/P I/E/P I/E/P

I/E/P

APPLICA TI ON INFORMATION HTRAN 2/155 18-CNT 238 004 7 U en L 1996-12-11

13

I Th i s string can be us ed in the command HGRCI t o s t ore t he roaming area characteris tic .

E Thi s s t r i ng can be used in the cornma nd HGRCE to r ernove t he roarning area characteristic .

E Th~s string can be used ~n the cornrnand HGRCP to print the r oaming a r ea characteristics, and can also appear in its printout (HLR ROAMI NG AREA CHARACTERISTICS DATA) and i n t he printou t i n i t iated by cornrnand HGLSP (HLR MOBILE SUBSCRIBER LOCATION SURVEY) .

1 This characteristic is only applicable when MAP V1 is used between HLR and VLR. When a mobile subscriber having Advice of Charge Charging provided roams into a VLR not characterized as AOCC, the whole PLMN may be restricted until a new UPDATE LOCATION message is performed from a VLR supporting Advice ofCharge.

2 This characteristic is applicable to both CLIR and COLR supplementary services. For CLIR it implies the old syntax in which only the values 'temporary default restricted' (RestrictionPerCaii=TRUE) and 'permanent' (RestrictionPerCaii=FALSE) are allowed to convey CLIR subscription information. For COLR it implies the old handling in which the COLR related data is sent to VLR in lnsertSubscriberData message only if the service is provided. When a certain Roaming Area Characteristic is not supported by the system the corresponding string will not be recognized by it.

Table 6: Service point e rs (SP)

These Service Po int e r s can appear in the printou t file initiated by command HGPFI .

SP Meaning

2 CALL FORWARDI NG UNCON DITIONAL . 4 CALL FORWARDING ON MOBI LE SUBSCRIBER BUSY . 5 CALL FORWARDING ON NO REPLY. 6 CALL FORWARDING ON MOBILE SUBSCRIBER NOT REACHABLE . 7 SINGLE PERSONAL NUMBER. 8 CALL WAITING . 9 CALL HOLD . 10 MULTIPARTY SERVICE . 11 ADVICE OF CHARGE . 15 BARRING OF ALL OUTGOING CALLS . 16 BARRI NG OF ALL OUTGOING I NTERNATIONAL CALLS . 17 BARRING OF ALL OUTGOI NG I NTERNATIONAL CALLS

EXCEPT THOSE DIRECTED TO THE HOME PLMN COUNTRY. 19 BARRING OF ALL INCOMI NG CALLS . 20 BARRING OF ALL I NCOMING CALLS WHEN

ROAMING OUTSIDE THE HOME PLMN COUNTRY. 21 SUBSCRIBER CATEGORY . 23 OPERATOR DETERMINED BARRING OF ALL OUTGOING CALLS . 24 OPERATOR DETERMINED BARRING OF ALL INCOMING CALLS . 25 OPERATOR DETERMINED BARRING OF ROAMING . 26 OPERATOR DETERM I NED BARRING OF OUTGOING

PREMIUM RATE CALLS (INFORMATION) . 27 OPERATOR DETERMINED BARRING OF OUTGOING

PREMIUM RATE CALLS (ENTERTAINMENT) . 28 OPERATOR DETERMINED BARRING OF

SUPPLEMENTARY SERVICES MANAGEMENT. 29 WHEN REGI STERED I N THE HPLMN ,

OPERATOR SPECIFIC BARRING (TYPE 1) . 30 WHEN REGISTERED IN THE HPLMN,

OPERATOR SPECIFIC BARRING (TYPE 2) . 31 WHEN REGI STERED IN THE HPLMN,

. -----

APPLICATION INFORMATION HTRAN 2/155 18-CNT 238 004 7 U en L 1996-12-11

OPERATOR SPECIFIC BARRING (TYPE 3). 32 WHEN REGISTERED IN THE HPLMN,

OPERATOR SPECIFIC BARRING (TYPE 4).

Table 6 lcontin.): Service pointers (SP)

SP Meaning

14

33 ORIGIN FOR FORWARDED-TO NUMBER ANALYSIS. 35 IMMEDIATE CALL ITEMIZATION. 36 ORIGINATING INTELLIGENT NETWORK. 37 TERMINATING INTELLIGENT NETWORK. 38 CALLING LINE IDENTIFICATION PRESENTATION . 39 CALLING LINE IDENTIFICATION RESTRICTION 40 CONNECTED LINE IDENTIFICATION PRESENTATION 41 CONNECTED LI NE IDENTIFICATION RESTRICTION 42 SUBSCRIPTION OPTION CONTROL OF BARRING SERVICES . 43 SUBSCRIPTION OPT ION CALL FORWARDING UNCONDITIONAL . 44 SUBSCRIPTION OPTI ON CALL FORWARDING ON MOBILE

SUBSCRIBER BUSY. 45 SUBSCRIPTION OPTION CALL FORWARDING ON NO REPLY . 46 SUBSCRIPTION OPTION CALL FORWARDING ON MOBILE SUBSCRIBER

NOT REACHABLE . 47 SUBSCRIPTION OPTION CALLING LINE IDENTIFICATION PRESENTATION. 48 SUBSCRIPTION OPTION CALLING LINE IDENTIFICATION RESTRICTION . 49 SUBSCRIPTION OPTION CONNECTED LINE IDENTIFICATION

PRESENTATION. 50 ALL SPEECH TRANSMISSION SERVICES. 51 TELESERVICE "TELEPHONY". 53 ALL SHORT MESSAGE SERVICES. 54 TELESERVICE "SHORT MESSAGE MT/PP". 55 TELESERVICE "SHORT MESSAGE MO/PP" . 56 ALL FACSIMILE TRANSMISSION SERVICES. 57 TELESERVICE "AUTOMATIC FACSIMILE GROUP 3". 58 AUXILIARY SPEECH SERVICES. 59 TELESERVICE "AUXILIARY TELEPHONY" . 60 ALL DATA CIRCUIT ASYNCHRONOUS SERVICES. 61 BEARER SERVICE " DATA CIRCUIT ASYNCHRONOUS 300 b/s". 62 BEARER SERVICE " DATA CIRCUIT ASYNCHRONOUS 1200 b/s ". 63 BEARER SERVICE " DATA CIRCUIT ASYNCHRONOUS 1200-75 b/s " . 64 BEARER SERVICE " DATA CIRCUIT ASYNCHRONOUS 2400 b/s". 65 BEARER SERVICE " DATA CIRCUIT ASYNCHRONOUS 4800 b/s" . 66 BEARER SERVICE " DATA CI RCUIT ASYNCHRONOUS 9600 b/s " . 67 ALL DATA CIRCUIT SYNCHRONOUS SERVICES. 68 BEARER SERVICE "DATA CIRCUIT SYNCHRONOUS 1200 b/s" . 69 BEARER SERVICE "DATA CIRCUIT SYNCHRONOUS 2400 b/s ". 70 BEARER SERVICE " DATA CI RCUIT SYNCHRONOUS 4800 b/s " .

Tab1e 6 (contin.) : Service pointers (SP)

SP Meaning

71 BEARER SERVICE "DATA CIRCUIT SYNCHRONOUS 9600 b/s". 72 DEFAULT BASIC SERVICE GROUP . 80 TELESERVICE "ALTERNATE SPEECH ANO FACSIMILE GROUP 3". 81 CLOSED USER GROOP. 82 REGIONAL SERVICES. 83 PRIMARY INTER-EXCHANGE CARRIER IDENTIFIER. 84 DEFAULT CALL FORWARDING. 85 SOBSCRIPTION OPTION FOR NOTIFICATION OF DEFAULT

CALL FORWARDING . 86 SOBSCRIPTION OPTION FOR FORWARDING CONDITIONS

FOR DEFAULT CALL FORWARDING. 87 CHANNEL ALLOCATION PRIORITY LEVEL. 88 ORIGINATING INTELLIGENT NETWORK CATEGORY KEY. 89 TERMINATING INTELLIGENT NETWORK CATEGORY KEY. 90 SUBSCRIPTION TYPE

2.2 Mobile Telephony Data

APPLICATION INFORMATION HTRAN 21155 18-C..:N r 238 0047 Uen L 1996-12-11

15

Command Value Pa~ameter Ranqe

SSN 6

NP 0-15

NA 0-127

D<?.scri.ptiory

Subsystem Number SSN=6, HLR entity within the Mobile Application Part In case the MAP policing in HLR is not supported by the system Lhis value will not be recognized.

Numbering Plan The Numbering Plan that can be used in the policing address when SSN•6 (MAP-HLR) : 1 E.163 and E.164 0,2-15 Not applicable . These

values can be used in the commands but they are not accepted by MAP when received from the network.

Nature of Address The Nature of address that can be used in the policing address when SSN-6: 3 National significant

number 4 International number 0-2,5-127 Not applicable. These

values can be used in the commands but they are not accepted by MAP when received from the netwo~k.

OPER See Incorning operations in HLR,

Command Parameter

description. received in a TC-BEGIN dialogue prirnitive

Value Range

Expressed as opslogan-opversion where: opslogan Operation slogan Identifier

1-7 characters opversion Operation version

Numeral 1-8 The operations allowed are: ACTIVSS-1 Activate SS

with MAP1 ACTIVSS-2 Actívate SS

with MAP2 BSOBACT-1 Begin Subscriber

Activity with MAPl

Description

DEACTSS-1 Deactivate SS with MAPl

DEACTSS-2 Deactivate SS with MAP2

ERASESS-1 Erase SS with MAPl

ERASESS-2 8rase SS with MAP2

INTERSS-1 Interroga te SS with MAP1

INTERSS-2 Interroga te SS with MAP2

MSPURGE-2 MS Purge with MAP2

NOTEMSP-1 Note MS Present

, . '

APPLICATION INFORMATION HTRAN 2/155 16-CNT 236 0047 Uen L 1996-12-11

16

Command Value Parameter Range

SP Se e description .

PUSSDAT-1

PUSSREQ-2

REGPASS-l

REGPASS-2

REGTRSS-1

REGTRSS-2

RESDATA-2

ROUINRQ-1

ROUINRQ-2

SETMWDA-1

SPARAMR-1

SROUINF-1

SROUINF-2

Description

SROUTSM-1

UNSSREQ-2

UNSSNOT-2

UPDALOC-1

UPDALOC-2

with MAP1 Process Unstructured SS Data with MAP1 Process Unstructured SS Request with MAP2 Register Password with MAPl Register Password with MAP2 Register SS with MAPl Register SS with MAP2 Restare Data with MAP2 Routing Information Request with MAP1 Routing Information Request with MAP2 Set Message Waiting Data with MAP1 Send Parameters with MAP1 Send Routing Information with MAPl Send Routing Information with MAP2

Send Routing Information for SM with MAP Unstructured SS Request with MAP2 Unstructured SS Notify with MAP2 Update Location with MAP1 Update Location with MAP2

NOTE: When a certain operation is not supported by the system, the corresponding OPER value will not be recognized .

Signalling Point Expressed as ni-spc where: ni Network Indicator

Numeral 0-3 O - International network

number 1 1 Internationa1 network

number 2 2 = National network

number 1 3· a National network

number 2 spc Signalling Point Code

Numeral 0- 16383

Documents

Manual HLR.pdf