Making Light Work For You - Lumenform Sheets/lumenform_spec_sheets.pdfFluorescent Quad Tube 2 x 26 - 42 W 12" DESCRIPTION The WTZS is an architectural grade full cutoff wall pack for

Lumenform Making Light Work For You

Lumenform Lighting, Inc. 6146 Indian Forest Circle Lake Worth, FL 33463 Tel: 561-422-4100 Fax: 561-422-4101 Web: www.lumenform.com

http://www.lumenform.com/

Lumenform Lighting, Inc. Specifications and Dimensions subject to change without notice. www.lumenform.com

Lumenform CONTENTS

Wall Packs

WTZS

Trapezoid Small WTZL

Trapezoid Large

WHR Wallpack

Half Round

WQS Wallpack

Quarter Sphere WCC

Wallpack Contoured Cutoff

WFDS Wall Flood Duo Small

WFDM Wall Flood

Duo Medium

WOD Wallpack

Oval Dome

WCR Wallpack

Cylinder Round

WLR Wallpack

LED Round

WLS Wallpack

LED Round

WGR Wall

Glow Round

WFR Wallpack

Fluorescent Round

WFS Wallpack

Fluorescent Square

WAR Wallpack

Architectural Round

WPS Wall Pack Small

WPM Wall Pack Medium

WPL Wall Pack Large

WPP Perimeter Protector

WPR2 Wallpack

Rectangular 2

WPR Wallpack

Rectangular

WPW Wall Pack

Wedge



Lumenform CONTENTS

Flood Lighting

F16 Floodlight LED 16″

FLPB Floodlight LED

PAR Bullet

FT

Flood Thousand Watt FH

Floodlight High W. FHM

Floodlight Micro style FM2

Floodlight Med. W. FAR

Arch. Roundback

FL Floodlight Low W.

FS Flood Sportslight



Lumenform CONTENTS

Area Lighting

DD Dusk to Dawn

ASB Arealighting

Shoe Box

ASBT ASB Thousand W

Bollards

BLR Bollard Round

Internal Reflector

BLR Bollard Round

Internal Louvers

BLR Bollard Round

Glass Type 3 or 5

Vapor Proof

VPB VP – Box mount

VPP VP - Pendant mount

VPW VP - Wall mount

VPL Vapor Proof Linear



Lumenform CONTENTS

Canopy & Garage

CS12 Canopy Square 12″

CLL Canopy LED Large

CLS Canopy LED Small

PGL Parking Garage

Luminaire

Vandal Resistant

VSM Vandal Surface

mount Medium (12″x12″)

VSMD Vandal Surface

Mount Medium – Deep Lens

VSS Vandal Surface

mount Small (9″x9″)

VSR Vandal Surface

mount Rectangular (5″x8″)

VREL Vandal Resistant

Entry Light (5″x13″)

VRC11 Vandal Resistant Cylindrical (11″)

VRC15 Vandal Resistant Cylindrical (15″)

VGLR Vandal Resistant

Garage Light Round

VSMW Vandal Resistant Surface Mount -

Wallpack



Lumenform CONTENTS

Industrial Lighting

HBCL High Bay COB LED

HBDD High Bay Dual Disk

HB High Bay Aluminum

HB High Bay Acrylic

HBT High Bay Thousand

W

LB Low Bay

LB - Low Bay Fully Acrylic

TL Temp. Light

Emergency Lighting & Exit Signs

ELP-FH Emergency Light

Fixed Heads

ELP-SH Emergency Light

Square Heads

ELP-SHL Emergency Light

Square Heads LED

ELP-HWSH High Wattage Square Heads

ELP-HW High Wattage Round Heads

ERH36 Emergency Remote

Heads PAR36 Indoor

ERHW36 Emergency Remote

Heads PAR36 Weatherproof

EXP Exit Sign – LED

Red & Green Versions

EEC-2T Combo–2 Top

Heads Red & Green

Versions

EEC-2S Combo–2 Side

Heads Red & Green

Versions



Lumenform WTZS – Wall pack Trapezoid Small

LED 30, 45, 70 W Metal Halide Pulse Start 50 – 150 W

High Pressure Sodium 35 – 150 W Fluorescent Quad Tube 2 x 26 - 42 W

DESCRIPTION The WTZS is an architectural grade full cutoff wall pack for up to LED 70W lamps, HID 150W lamps or Fluorescent quad tube 2 x 42W lamps. Fully Dark Sky compliant. U.L. listed for wet locations.

APPLICATION Ideal for security lighting around commercial, industrial and residential buildings where limiting glare and light trespass are important while maintaining an aesthetically appealing dayform appearance.

CONSTRUCTION The housing is made of high pressure die cast aluminum and finished in a dark bronze polyester powder coat paint finish for lasting corrosion resistance. Die formed, anodized aluminum reflector. Silicon rubber gasket for long life. LED versions – vandal resistant polycarbonate lens. MP, HP and FL versions - Clear tempered glass lens, impact and heat resistant.

BALLAST / DRIVER Universal Voltage (120-277V) electronic drivers / ballasts for LED and compact fluorescent. High Power Factor, Constant Wattage Autotransformer ballasts. Multi Tap (120/208/240/277V) or 480V ballasts. Reactor 120V ballasts for HPS. Minimum starting temperature is -20°F (-30°C) for MP, -40°F (-40°C) for HPS.

MOUNTING Knockout pattern provided on back casting for mounting to junction boxes. Three ½″ threaded entry hubs provided for top or side conduit wiring and through wiring.

LED DATA Nominal

Watts Delivered Lumens

HID Equal

30 3,400 150W

45 4,846 200W

70 7,327 250W+

CRI = 80+ Color Temperature = 5000 K Input Voltage = 120-277V, 50/60 Hz

CATALOG NUMBER LOGIC

WTZS- LD 70- UV- Product Series Lamp Type Lamp Wattage Voltage Lamp WTZS = Wall pack Trapezoid Small

LD = LED MP = Metal Halide Pulse Start HP = High Pressure Sodium FL = Fluorescent quad tube

(LED) 30, 45, 70 (MP) 50, 70, 100, 150 (HPS) 35, 50, 70, 100, 150 (FL) 226 = 2 x 26W 232 = 2 x 32W 242 = 2 x 42W

UV = Universal Voltage 120 – 277 V MT = Multi Tap 120/208/240/277V 120V = 120V 480V = 480V

Blank for LED L = Lamp Included (MP, HP & FL)

OPTIONS EM – Emergency ballast for FL versions.

9" (229 mm)

14" (356 mm)

12" (305 mm)



Lumenform WTZL - Wall pack Trapezoid Large

LED 90, 135 W Metal Halide Pulse Start 200 - 400 W

High Pressure Sodium 250 - 400 W Induction 80 - 100 W

DESCRIPTION The WTZL is an architectural grade full cutoff wall pack for up to LED 135W lamps, HID 400W lamps or Induction 100W lamps. Fully Dark Sky compliant. U.L. listed for wet locations.

APPLICATION Ideal for security lighting around commercial, industrial and residential buildings where limiting glare and light trespass are important while maintaining an aesthetically appealing dayform appearance.

CONSTRUCTION The housing is made of high pressure die cast aluminum and finished in a dark bronze polyester powder coat paint finish for lasting corrosion resistance. Die formed, anodized aluminum reflector. Silicon rubber gasket for long life. LED versions – vandal resistant polycarbonate lens. MP, HP and ID versions - Clear tempered glass lens, impact and heat resistant.

BALLAST / DRIVER Universal Voltage (120-277V) electronic drivers for LED. High Power Factor, Constant Wattage Autotransformer ballasts. Multi Tap (120/208/240/277V) or 480V ballasts for HID. Minimum starting temperature is -20°F (-30°C) for MP, -40°F (-40°C) for HPS.


LED DATA Nominal

Watts Delivered Lumens

HID Equal

90 9,378 350W

135 13,604 400W



WTZL- LD 135- UV- Product Series Lamp Type Lamp Wattage Voltage Lamp WTZL = Wall pack Trapezoid Large

LD = LED MP = Metal Halide Pulse Start HP = High Pressure Sodium ID = Induction

(LED) 90, 135 (MP) 200, 250, 320, 350, 400 (HPS) 250, 400 (ID) 80, 100

UV = Universal Voltage 120 – 277 V MT = Multi Tap 120/208/240/277V 480V = 480V

Blank for LED L = Lamp Included (MP, HP & ID)

18" (457 mm)

12" (305 mm)

9" (229 mm)



Lumenform WHR – Wallpack Half Round


High Pressure Sodium 35 – 150 W Fluorescent Quad Tube 1 x 26 – 42 W

DESCRIPTION The WHR is an architectural grade full cutoff wall pack for up to 95W LED lamps, HID 150W lamps or Fluorescent quad tube 1 x 42W lamps. HID and FL distributions include WT - Wide Throw, and UD - UP and Down. The WT and distributions are fully Dark Sky compliant. U.L. listed for wet locations.

APPLICATION Ideal for security lighting around commercial, industrial and residential buildings where maintaining an esthetically appealing dayform appearance is important.

CONSTRUCTION The housing is made of high pressure die cast aluminum and finished in a dark bronze polyester powder coat paint finish for lasting corrosion resistance. Silicon rubber gasket for long life. Clear tempered glass lens, impact and heat resistant.


MOUNTING Quick Install bracket (see below) makes for fast installations.

REFLECTOR Die formed, anodized aluminum. Available in two optical distributions for HID and FL. WT – Wide Throw UD – 50% UP and 50% Down

LED DATA LED Watts

System Watts

Delivered Lumens

HID Equal

47 52 4,459 200W

63 77 7,089 250+W

95 117 10,634 400W

Input Voltage = 120-277V, 50/60 Hz

QUICK INSTALL BRACKET

Attach Quick Install bracket to wall or junction

box. Slide fixture onto Quick Install bracket and

make electrical connections. Secure fixture to Quick Install bracket with

screws.


WHR- MP 150- MT- UD- L Product Series Lamp Type Lamp Wattage Voltage Light Distribution Lamp WHR = Wallpack Half Round


(LED) 47, 63, 95 (MP) 70, 100, 150 (HPS) 35, 50, 70, 100, 150 (FL) 226 = 2 x 26W 232 = 2 x 32W 242 = 2 x 42W

MT = Multi Tap 120/208/240/277V UV = Universal Voltage 120 – 277 V 120V = 120V 480V = 480V

WT = Wide Throw UD = Up & Down

Blank for LED L = Lamp Included



Lumenform WQS – Wallpack Quarter Sphere


High Pressure Sodium 35 – 150 W Fluorescent Quad Tube 2 x 26 – 42 W

DESCRIPTION The WQS is an architectural grade full cutoff wall pack for up to LED 95W lamps, HID 150W lamps or Fluorescent quad tube 2 X 42W lamps. Dark Sky compliant. U.L. listed for wet locations.

APPLICATION Ideal for security lighting around commercial, industrial and residential buildings where maintaining an esthetically appealing dayform appearance is important.

CONSTRUCTION The housing is made of high pressure die cast aluminum and finished in a dark bronze polyester powder coat paint finish for lasting corrosion resistance. Silicon rubber gasket for long life. Clear tempered glass lens, impact and heat resistant.


MOUNTING Quick Install bracket (see below) makes for fast installations.

LED DATA LED Watts

System Watts

Delivered Lumens

HID Equal

47 52 4,305 200W

63 77 7,089 250+W

95 117 10,634 400W


QUICK INSTALL BRACKET

Attach Quick Install bracket to wall or junction

box. Slide fixture onto Quick Install bracket and

make electrical connections. Secure fixture to Quick Install bracket with

screws.

WQS- MP 150- MT- L Product Series Lamp Type Lamp Wattage Voltage Lamp WQS = Wallpack Quarter Sphere


(LED) 47, 63, 95 (MP) 70, 100, 150 (HPS) 35, 50, 70, 100, 150 (FL) 226 = 2 x 26W 232 = 2 x 32W 242 = 2 x 42W





Lumenform WCC – Wallpack Contoured Cutoff

Metal Halide Pulse Start 50 – 100 W High Pressure Sodium 35 – 100 W

Fluorescent Quad Tube 1 x 26 - 42 W

DESCRIPTION

The WCC is an architectural grade full cutoff wall pack for up to HID 100W lamps or Fluorescent quad tube 1 x 42W lamps. Fully Dark Sky compliant. U.L. listed for wet locations.

APPLICATION

Ideal for security lighting around commercial, industrial and residential buildings where a combination of the polycarbonate lens, full cutoff optics and architectural looks are desired.

HOUSING

The back housing is made of high pressure die cast aluminum and finished in a dark bronze polyester powder coat paint finish for lasting corrosion resistance. It includes ½″ threaded openings for conduit entry or photocell mounting.

BALLAST

High Power Factor, Constant Wattage Autotransformer ballasts, Multi Tap (120/208/240/277V) or reactor 120V ballasts for HPS. Minimum starting temperature is -20°F (-30°C) for MP, -40°F (-40°C) for HPS. Electronic ballasts for Fluorescent 1x26, 32 or 42W in Dual Tap (120/277V).

SOCKET

Medium base, 4KV pulse rated porcelain socket for HID lamps. Positive latching thermoplastic socket for fluorescent lamps.

REFLECTOR

Die formed, anodized aluminum.

GASKET

Silicone rubber for long life.

LENS / FRONT HOUSING

Tough injection molded one piece polycarbonate lens/front housing. Bronze top housing section with clear bottom lens.


WCC- MP 100- MT- L Product Series Lamp Type Lamp Wattage Voltage Lamp WCC = Wallpack Contoured Cutoff

MP = Metal Halide Pulse Start HP = High Pressure Sodium FL = Fluorescent quad tube

(MP) 50, 70, 100 (HPS) 35, 50, 70, 100 (FL) 126 = 1 x 26W 132 = 1 x 32W 142 = 1 x 42W

MT = Multi Tap 120/208/240/277V DT = Dual Tap120/277V 120V = 120V 480V = 480V

L = Lamp Included

OPTIONS PC-XXX – Button Photocell (XXX = specify voltage)



Lumenform WFDS – Wall Flood Duo Small

LED 20, 30 W

Wallpack Flood with Trunnion Flood with Knuckle

DESCRIPTION The WFDS is a versatile architectural product that can be either a wallpack or a floodlight with the optional Trunnion or Knuckle kits. Its slim design makes it ADA compliant for low mounting heights. Available in energy saving LED 20W or 30W version with comparable performance to HID 70W or 100W. U.L. listed for wet locations.

APPLICATION The wallpack version is ideal for security lighting around commercial, industrial or residential buildings. Its architectural good looks make it perfect for lighting entranceways. Its compact 4″ depth allows it to be used for low level pathway illumination. Dark Sky compliant when used as a wallpack. The floodlight versions are suitable for applications such as facades, signs, and landscape lighting.

CONSTRUCTION The housing is made of high pressure die cast aluminum and finished in a dark bronze polyester powder coat paint finish for lasting corrosion resistance. Die formed, anodized aluminum reflector. Silicon rubber gasket for long life. Clear tempered glass lens, impact and heat resistant.

LED DRIVER Electronic LED driver available in universal voltage 120-277V input, 50/60 Hz.

MOUNTING Wallpack - Knockout pattern provided on back casting for mounting to junction boxes. Three ½″ threaded entry hubs provided for conduit wiring and through wiring. Trunnion – Adjustable stamped steel trunnion for mounting to walls or floors. Knuckle - Adjustable knuckle mount allows mounting into ½″ NPS outlet boxes.

LED DATA

LED Watts

System Watts

Delivered Lumens

HID Equal

20 22 1,850 70W

30 32 2,500 100W

CRI = 80 Color Temperature = 5000 K Consult factory for optional 3500K version. Input Voltage = 120-277V, 50/60 Hz


WFDS- LD 30- UV Product Series Lamp Type Lamp Wattage Voltage WFDS = Wall Flood Duo Small

LD = LED

(LED) 20, 30 UV = Universal Voltage 120 – 277 V

OPTIONS WFDS-TR - Kit for converting WFDS to a Trunnion mounted floodlight. WFDS-KM - Kit for converting WFDS to a Knuckle mounted floodlight. PC-XXX – Button Photocell (XXX = specify voltage).



Lumenform WFDM – Wall Flood Duo Medium

LED 50, 80 W

DESCRIPTION The WFDM is a versatile architectural product that can be either a wallpack or a floodlight with the optional Trunnion or Knuckle kits. Available in energy saving LED 50W or 80W version with comparable performance to HID 175W or 250W. U.L. listed for wet locations.

APPLICATION The wallpack version is ideal for security lighting around commercial, industrial or residential buildings. Its architectural good looks make it perfect for lighting entranceways. Dark Sky compliant when used as a wallpack. The floodlight versions are suitable for applications such as facades, signs, and landscape lighting.



MOUNTING Wallpack - Knockout pattern provided on back casting for mounting to junction boxes. Three ½″ threaded entry hubs provided for conduit wiring and through wiring. Trunnion – Adjustable stamped steel trunnion for mounting to walls or floors. Knuckle - Adjustable knuckle mount allows mounting into ½″ NPS outlet boxes.

LED DATA

System Watts

Delivered Lumens

HID Equal

50 4,364 175W

80 7,371 250W

CRI = 80 Color Temperature = 5000 K Consult factory for optional 3500K version. Input Voltage = 120-277V, 50/60 Hz


WFDM- LD 50- UV Product Series Lamp Type Lamp Wattage Voltage WFDM = Wall Flood Duo Medium

LD = LED


OPTIONS WFDM-TR - Kit for converting WFDM to a Trunnion mounted floodlight. WFDM-KM - Kit for converting WFDM to a Knuckle mounted floodlight. PC-XXX – Button Photocell (XXX = specify voltage).



Lumenform WOD – Wallpack Oval Dome

LED 16, 28, 35, 45 W

With Lens Without Lens

DESCRIPTION The WOD is an architectural outdoor wallpack that can be used with or without the included lens. Available in energy saving LED 16, 28, 35 and 45W for comparable performance to HID 50-150W. U.L. listed for wet locations.

APPLICATION The WOD is suitable for everyday security lighting usage around residential, commercial or industrial buildings or as an entry light above doorways. The included photocell (120V only) can provide automatic dusk to dawn operation. Dark Sky compliant when used without the lens.

CONSTRUCTION The housing is made of high pressure die cast aluminum and finished in a dark bronze polyester powder coat paint finish for lasting corrosion resistance. Injection molded polycarbonate lens included. Can be used with or without the lens. High grade weatherproof silicon rubber gasket for long life.

LED DRIVER Electronic LED driver available in universal voltage 120-277V input, 50/60 Hz. Operating temperature from -4°F (-20°C) to 104°F (40°C).

PHOTOCELL Button type photocell included for 120V input operation. For other input voltages the photocell must be changed.

LED DATA System Watts

Delivered Lumens

HID Equal

16 1,000 50W

28 1,850 70W

35 2,300 100W

45 3,350 150W

CRI = 70+ Color Temperature = Cool White 5000 K standard. Consult factory for optional Warm White 3000K version. Input Voltage = 120-277V, 50/60 Hz


WOD- LD 45- UV Product Series Lamp Type Lamp Wattage Voltage WOD = Wallpack Oval Dome

LD = LED

(LED) 16, 28, 35, 45 UV = Universal Voltage 120 – 277 V

OPTIONS 3000K – Warm White 3000K color temperature LED’s.



Lumenform WCR – Wallpack Cylinder Round

Down Only - LED 20 W Up & Down - LED 40 W

Down Only Up & Down

Down Only Up & Down

DESCRIPTION The WCR are architectural outdoor grade wall cylinders. Available in two beam spreads for the Down only version and three beam spreads for the Up & Down version for greater design flexibility. Uses COB (Chip On Board) style LED of 20W for the Down only version or 40W for the Up & Down version. U.L. listed for wet locations.

APPLICATION The WCR wall cylinders are suitable for accent lighting of buildings as well as general lighting of areas beside buildings. The optional photocell can provide automatic dusk to dawn operation. Dark Sky compliant for the Down only version.

CONSTRUCTION The main housing is made of extruded aluminum and finished in a dark bronze or optional black polyester powder coat paint finish for lasting corrosion resistance. White painted reflector. Tempered flat glass lens. Designed to be mounted over a 4″ recessed junction box.

LED DRIVER Electronic LED driver available in universal voltage 120-277V input, 50/60 Hz. Operating temperature from -4°F (-20°C) to 104°F (40°C). Dimmable driver is standard.

PHOTOCELL Optional button type photocell automatic dusk to dawn operation.


Distribution Delivered Lumens

HID Equal

20 Down 100° 1,783 70W

20 Down 70° 2,308 100W

40 Up & Down

100° 3.328 150W

40 Up & Down

70° 4,380 200W

40 Up 70° &

Down 100° 3,381 150W

CRI = 80+ Color Temperature = 4100 K standard. Input Voltage = 120-277V, 50/60 Hz Dimmable driver standard.


WCR- LD 40- UV- UD100 Product Series Lamp Type Lamp Wattage Voltage Distribution WCR = Wallpack Cylinder Round

LD = LED

Down only = 20 W Up & Down = 40 W

UV = Universal Voltage 120 – 277 V

D100 = Down only 100° D70 = Down only 70° UD100 = Up & Down 100° UD70 = Up & Down 70° U70D100 = Up 70° & Down 100°

OPTIONS PC-XXX – Button Photocell (XXX = specify voltage) BLK – Black color



Lumenform WLR – Wallpack LED Round

LED 17 W

EL Eyelid

GR Grid

OF Open Face

DESCRIPTION The WLR is an architectural series of round wallpacks which come in energy saving LED 17W with comparable performance to HID 70W. Available in three front face styles: EL – Eyelid. GR - Grid. OF - Open Face. U.L. listed for wet locations.

APPLICATION Ideal for security lighting and entranceway lighting around commercial, industrial and residential buildings. The polycarbonate lenses combine vandal resistance with an architecturally pleasing product.

CONSTRUCTION The housing is made of high pressure die cast aluminum and finished in a dark bronze polyester powder coat paint finish for lasting corrosion resistance. Optional white finish also available. Injection molded polycarbonate opal lens. High grade weatherproof silicon rubber gasket for long life.

LED DRIVER Electronic LED driver available in universal voltage 120-277V input, 50/60 Hz. Operating temperature from -40°F (-40°C) to 104°F (40°C). Dimmable driver standard.

LED DATA LED

Watts System Watts

Delivered Lumens

HID Equal

17 19.7 EL - 1467 70W

17 19.7 GR - 1468 70W

17 19.7 OF - 1674 70W

CRI = 80+ Color Temperature = Cool White 5000 K standard. Consult factory for optional Neutral White 4000K version. Input Voltage = 120-277V, 50/60 Hz


WLR- LD 17- UV- GR Product Series Lamp Type Lamp Wattage Voltage Face Style WLR = Wallpack LED Round

LD = LED

(LD) 17 UV = Universal Voltage 120 – 277 V

EL = Eyelid GR = Grid OF = Open Face

OPTIONS PC-XXX – Button Photocell (XXX = specify voltage) EML – Emergency ballast for LED. Provides 90 minutes of emergency backup power. WHT – White finish. 4000K – Neutral white 4000K color temperature.



Lumenform WLS – Wallpack LED Square

LED 17 W

EL Eyelid

GR Grid

OF Open Face

DESCRIPTION The WLS is an architectural series of square wallpacks which come in energy saving LED 17W with comparable performance to HID 70W. Available in three front face styles: EL – Eyelid. GR - Grid. OF - Open Face. U.L. listed for wet locations.


CONSTRUCTION The housing is made of high pressure die cast aluminum and finished in a dark bronze polyester powder coat paint finish for lasting corrosion resistance. Optional white finish also available. Injection molded polycarbonate opal lens. High grade weatherproof silicon rubber gasket for long life.


LED DATA LED

Watts System Watts

Delivered Lumens

HID Equal

17 19.7 EL - 1570 70W

17 19.7 GR - 1363 70W

17 19.7 OF - 1614 70W

CRI = 80+ Color Temperature = Cool White 5000 K standard. Consult factory for optional Neutral White 4000K version. Input Voltage = 120-277V, 50/60 Hz


WLS- LD 17- UV- GR Product Series Lamp Type Lamp Wattage Voltage Face Style WLS = Wallpack LED Square

LD = LED

(LD) 17 UV = Universal Voltage 120 – 277 V


OPTIONS PC-XXX – Button Photocell (XXX = specify voltage) EML – Emergency ballast for LED. Provides 90 minutes of emergency backup power. WHT – White finish. 4000K – Neutral white 4000K color temperature.



Lumenform WGR – Wallpack Glow Round

LED 20, 30 W

DESCRIPTION The WGR is a classic glowing circle luminaire for outdoor use that can be wall mounted or ceiling mounted. Available in energy saving LED 20W or 30W sizes for comparable performance to HID 70W or 100W. U.L. listed for wet locations.

APPLICATION The WGR is suitable for outdoor usage around residential, commercial or industrial buildings, as an entry light above doorways or as a ceiling/canopy light.

CONSTRUCTION The housing is made of ABS thermoplastic and has a hinged front cover. Injection molded polycarbonate opal lens for an even diffused look. High grade weatherproof silicon rubber gasket for long life.



Delivered Lumens

HID Equal

20 1,869 70W

30 2,633 100W



WGR- LD 30- UV Product Series Lamp Type Lamp Wattage Voltage WGR = Wallpack Glow Round

LD = LED




Lumenform WFR – Wallpack Fluorescent Round

LED 23 W Fluorescent Quad Tube 2 x 26 - 42 W

EL

Eyelid GR Grid

OF Open Face

DESCRIPTION The WFR series of round wallpacks offers an architectural look combined with energy savings in either up to 23W LED lamps or Fluorescent quad tube 2 x 42W lamps. Available in three front face styles: EL – Eyelid. GR - Grid. OF - Open Face. U.L. listed for wet locations.


HOUSING The housing is made of high pressure die cast aluminum and finished in a polyester powder coat paint finish for lasting corrosion resistance. Available in dark bronze or white color finishes.

BALLAST / DRIVER Electronic ballasts / drivers in Universal Voltage 120 – 277V, 50/60 Hz input.

SOCKET Positive latching thermoplastic socket for fluorescent lamps.

MOUNTING Knockout pattern and threaded hub provided on back casting for mounting to junction boxes.

REFLECTOR Die formed, white polyester powder coat painted aluminum.

GASKET Silicone rubber for long life.

LENS One piece injection molded opal polycarbonate for increased vandal resistance.

LED DATA

LED Wattage = 23 W Total Wattage = 27 W LED Lumens = 3,429 lumens Delivered Lumens EL = 1683 lumens Delivered Lumens GR & OF = 2147 lumens CRI = 85 Color Temperature = 5000 K Input Voltage = 120–277 V, 50/60 Hz


WFR- FL 242- UV- GR L Product Series Lamp Type Lamp Wattage Voltage Face Style Lamp WFR = Wallpack Fluorescent Round

LD = LED FL = Fluorescent quad tube

(LD) 23 (FL) 226 = 2 x 26W 232 = 2 x 32W 242 = 2 x 42W




OPTIONS PC-XXX – Button Photocell (XXX = specify voltage) EM – Emergency ballast for FL versions. Provides 90 minutes of emergency backup power to one lamp.

14 3/8"

(365 mm)

EL 6 1/4" (160 mm)

GR 6 3/4" (170 mm)

OF 6 " (152 mm)



Lumenform WFS – Wallpack Fluorescent Square

LED 23 W Fluorescent Quad Tube 2 x 26 - 42 W

EL

Eyelid GR Grid

OF Open Face

DESCRIPTION The WFS series of square wallpacks offers an architectural look combined with energy savings in either up to 23W LED lamps or Fluorescent quad tube 2 x 42W lamps. Available in three front face styles: EL – Eyelid. GR - Grid. OF - Open Face. U.L. listed for wet locations.


HOUSING The housing is made of high pressure die cast aluminum and finished in a polyester powder coat paint finish for lasting corrosion resistance. Available in dark bronze or white color finishes.

BALLAST / DRIVER Electronic ballasts / drivers in Universal Voltage 120 – 277V, 50/60 Hz input.

SOCKET Positive latching thermoplastic socket for fluorescent lamps.

MOUNTING Knockout pattern and threaded hub provided on back casting for mounting to junction boxes.



LENS One piece injection molded opal polycarbonate for increased vandal resistance.

LED DATA

LED Wattage = 23 W Total Wattage = 27 W LED Lumens = 3,276 lumens Delivered Lumens EL = 1,594 lumens Delivered Lumens GR & OF = 2,013 lumens CRI = 85 Color Temperature = 5000 K Input Voltage = 120–277 V, 50/60 Hz


WFS- FL 242- UV- GR L Product Series Lamp Type Lamp Wattage Voltage Face Style Lamp WFS = Wallpack Fluorescent Square

LD = LED FL = Fluorescent quad tube

(LD) 23 (FL) 226 = 2 x 26W 232 = 2 x 32W 242 = 2 x 42W




OPTIONS PC-XXX – Button Photocell (XXX = specify voltage) EM – Emergency ballast for FL versions. Provides 90 minutes of emergency backup power to one lamp.

13 3/4 "

(350 mm)

13 3/4 "

(350 mm)

EL 6 1/4" (160 mm)

GR 6 1/4" (160 mm)

OF 5 1/4" (133 mm)



Lumenform WAR – Wallpack Architectural Round


Fluorescent Quad Tube 2 x 26 - 42 W Induction 80 W

EL Eyelid

GR Grid

OF Open Face

DESCRIPTION The WAR series of architectural round wallpacks are available in up to HID 150W lamps, Fluorescent quad tube 2 x 42W lamps or Induction 80W lamps. Available in three front face styles: EL – Eyelid. GR - Grid. OF - Open Face. U.L. listed for wet locations.

APPLICATION Ideal for security lighting and entranceway lighting around commercial, industrial and residential buildings where an architectural pleasing product is desired along with the higher light levels possible with HID lamps.

HOUSING The housing is made of high pressure die cast aluminum and finished in a polyester powder coat paint finish for lasting corrosion resistance. Available in dark bronze, white or black color finishes.

BALLAST High Power Factor, CWA ballasts, Multi Tap (120/208/240/277V) or reactor 120V ballasts for HPS. Minimum starting temperature is -20°F (-30°C) for MP, -40°F (-40°C) for HPS. Universal Voltage (120-277V) electronic drivers for compact fluorescent and induction.

SOCKET Medium base, 4KV pulse rated porcelain socket for HID lamps. Positive latching thermoplastic socket for fluorescent lamps.

MOUNTING Knockout pattern provided on back casting for mounting to junction boxes. Four ½″ threaded entry hubs provided for conduit wiring and through wiring.



LENS Clear prismatic borosilicate glass, impact and heat resistant. Optional frosted glass lens available.


WAR- MP 150- MT- GR L Product Series Lamp Type Lamp Wattage Voltage Face Style Lamp WAR = Wallpack Architectural Round

MP = Metal Halide Pulse Start HP = High Pressure Sodium FL = Fluorescent quad tube ID = Induction

(MP) 70, 100, 150 (HPS) 35, 50, 70, 100, 150 (FL) 226 = 2 x 26W 232 = 2 x 32W 242 = 2 x 42W (ID) 80



L = Lamp Included

OPTIONS PC-XXX – Button Photocell (XXX = specify voltage) Q – Quartz restrike system with quartz lamp. EM – Emergency ballast for FL versions. QT – Quartz restrike system with time delay, with lamp.

15″ 380 mm

EL 9 ¼″ (235mm) GR 9 ¼″ (235mm)

OF 8 ¾″ (222mm)



Lumenform WPS - Wall Pack Small



DESCRIPTION The WPS is designed for up to LED 70W lamps, HID 150W lamps or Fluorescent 2 x 42W lamps. Its rugged die cast aluminum housing and either polycarbonate lens or borosilicate glass lens give it long lasting performance. U.L. listed for wet locations.

APPLICATION Ideal for security lighting around commercial, industrial and residential buildings where lower mounting heights are available.

CONSTRUCTION The housing is made of high pressure die cast aluminum and finished in a dark bronze polyester powder coat paint finish for lasting corrosion resistance. Die formed, anodized aluminum reflector. Silicon rubber gasket for long life. Polycarbonate lens for LED versions. Prismatic borosilicate glass lens for other versions, impact and heat resistant. The door assembly is secured with a stainless steel chain to ensure easy relamping without lens breakage.

BALLAST / DRIVER Universal Voltage (120-277V) electronic drivers / ballasts for LED and compact fluorescent. High Power Factor, Constant Wattage Autotransformer ballasts. Multi Tap (120/208/240/277V) or 480V ballasts for. Reactor 120V ballasts for HPS. Minimum starting temperature is -20°F (-30°C) for MP, -40°F (-40°C) for HPS.

LED DATA Nominal Watts

Delivered Lumens

HID Equal

30 3,306 150W

45 4,485 200W

70 6,704 250W



WPS- LD 70- UV Product Series Lamp Type Lamp Wattage Voltage Lamp WPS = Wall Pack Small




Blank for LED L = Lamp Included (MP, HP, & FL)

OPTIONS WPS-WG – Wire Guard for WPS fixture. WPS-GS – Glare Shield for WPS fixture. WPS-VS – Vandal Shield for WPS fixture.

PC-XXX – Button Photocell (XXX = specify voltage). EM – Emergency ballast for FL versions.



Lumenform WPM - Wall Pack Medium

LED 90, 135 W Metal Halide Pulse Start 200 – 250 W

High Pressure Sodium 250 W Induction 80 - 100 W

DESCRIPTION The WPM is designed for up to LED 135W lamps, HID 250W lamps or Induction 100W lamps. Its rugged die cast aluminum housing and borosilicate glass lens give it long lasting performance. U.L. listed for wet locations.

APPLICATION Ideal for security lighting around commercial, industrial and residential buildings where higher mounting heights are available.

CONSTRUCTION The housing is made of high pressure die cast aluminum and finished in a dark bronze polyester powder coat paint finish for lasting corrosion resistance. Die formed, anodized aluminum reflector. Silicon rubber gasket for long life. Polycarbonate lens for LED versions. Prismatic borosilicate glass lens for other versions, impact and heat resistant. The door assembly is secured with a stainless steel chain to ensure easy relamping without lens breakage.

BALLAST / DRIVER Universal Voltage (120-277V) electronic drivers / ballasts for LED. High Power Factor, Constant Wattage Autotransformer ballasts. Multi Tap (120/208/240/277V) or 480V ballasts. Minimum starting temperature is -20°F (-30°C) for MP, -40°F (-40°C) for HPS.


Delivered Lumens

HID Equal

90 9,527 300W

135 13,705 400W



WPM- LD 135- UV Product Series Lamp Type Lamp Wattage Voltage Lamp WPM = Wall Pack Medium


(LED) 90, 135 (MP) 200, 250 (HPS) 250 (ID) 80, 100

MT = Multi Tap 120/208/240/277V UV = Universal Voltage 120 – 277 V 480V = 480V

Blank for LED L = Lamp Included (MP, HP, & ID)

OPTIONS WPL-WG – Wire Guard for WPM or WPL fixture. WPL-GS – Glare Shield for WPM or WPL fixture. WPL-VS – Vandal Shield for WPM or WPL fixture. PC-XXX – Button Photocell (XXX = specify voltage).



Lumenform WPL - Wall Pack Large

LED 108, 126 W Metal Halide Pulse Start 320 - 400 W

High Pressure Sodium 400 W Induction 80 - 120 W

DESCRIPTION The WPL is designed for up to LED 126W lamps, HID 400W lamps or Induction 120W lamps. Its rugged die cast aluminum housing and borosilicate glass lens give it long lasting performance. U.L. listed for wet locations.

APPLICATION Ideal for security lighting around commercial, industrial and residential buildings where higher mounting heights are available and a large area needs to be lit.

CONSTRUCTION The housing is made of high pressure die cast aluminum and finished in a dark bronze polyester powder coat paint finish for lasting corrosion resistance. Die formed, anodized aluminum reflector. Silicon rubber gasket for long life. Prismatic borosilicate glass lens, impact and heat resistant. The door assembly is secured with a stainless steel chain to ensure easy relamping without lens breakage.

BALLAST / DRIVER Universal Voltage (120-277V) electronic drivers for LED. High Power Factor, Constant Wattage Autotransformer ballasts. Multi Tap (120/208/240/277V) or 480V ballasts for HID. Minimum starting temperature is -20°F (-30°C) for MP, -40°F (-40°C) for HPS.

LED DATA LED Watts

System Watts

Delivered Lumens

HID Equal

108 133 11,394 400W

126 150 14,000 400+W

CRI = 70 Color Temperature = 5700 K Input Voltage = 120-277V, 50/60 Hz


WPL- MP 400- MT- L Product Series Lamp Type Lamp Wattage Voltage Lamp WPL = Wall Pack Large


(LD) 108, 126 (MP) 320, 350, 400 (HPS) 400 (ID) 80, 100, 120


L = Lamp Included

OPTIONS WPL-WG – Wire Guard for WPM or WPL fixture. WPL-GS – Glare Shield for WPM or WPL fixture. WPL-VS – Vandal Shield for WPM or WPL fixture. PC-XXX – Button Photocell (XXX = specify voltage).



Lumenform WPP – Wall pack Perimeter Protector

LED 63, 95, 126 W Metal Halide Pulse Start 150 - 400 W

High Pressure Sodium 150 - 400 W Fluorescent Quad Tube 2 x 26 - 42 W

DESCRIPTION The WPP – Wall pack Perimeter Protector is designed for up to LED 126W lamps, HID 400W lamps or Fluorescent 2 x 42W lamps. Its rugged die cast aluminum housing and borosilicate glass lens give it long lasting performance. U.L. listed for wet locations.

APPLICATION Ideal for lighting the perimeter area around commercial, industrial and residential buildings where higher mounting heights are available and a large area needs to be lit. Its 7.2″ depth gives it a sleeker and slimmer profile than other 400W wall packs on the market.

CONSTRUCTION The housing is made of high pressure die cast aluminum and finished in a dark bronze polyester powder coat paint finish for lasting corrosion resistance. Die formed, anodized aluminum reflector. Silicon rubber gasket for long life. Prismatic borosilicate glass lens, impact and heat resistant. The door assembly is secured with a stainless steel chain to ensure easy relamping without lens breakage.

BALLAST / DRIVER Universal Voltage (120-277V) electronic drivers / ballasts for LED and compact fluorescent. High Power Factor, Constant Wattage Autotransformer ballasts. Multi Tap (120/208/240/277V) or 480V ballasts for HID. Minimum starting temperature is -20°F (-30°C) for MP, -40°F (-40°C) for HPS.

MOUNTING Knockout pattern provided on back casting for mounting to junction boxes. ½″ threaded entry hubs provided for surface conduit wiring and through wiring.

LED DATA LED Watts

System Watts

Delivered Lumens

HID Equal

63 77 6,203 250W

95 117 9,305 350W

126 150 12,406 400W



WPP- MP 400- MT- L Product Series Lamp Type Lamp Wattage Voltage Lamp WPP = Wall pack Perimeter Protector


(LED) 63, 95, 126 (MP) 150, 200, 250, 320, 350, 400 (HPS) 150, 250, 400 (FL) 226 = 2 x 26W 232 = 2 x 32W 242 = 2 x 42W


L = Lamp Included

OPTIONS WPP-WG – Wire Guard for WPP fixture. PC-XXX – Button Photocell (XXX = specify voltage).



Lumenform WPR2 - Wall Pack Rectangular 2

LED 17, 25 W

DESCRIPTION The WPR2 is an economical and compact low wattage security light. It comes in energy saving LED 17 or 25W versions. Its integrated photocell allows the unit to turn on automatically at dusk and turn off at dawn. U.L. listed for wet locations.

APPLICATION Ideal for security lighting around commercial, industrial and residential buildings where lower mounting heights are available. Ideal as an automatically operating security light.

BACK PLATE The housing’s back plate is made of high pressure die cast aluminum. The back plate is designed for mounting over an outlet box. A bottom threaded conduit entry hub is also provided for surface conduit wiring.

HOUSING & LENS Injection molded polycarbonate housing with molded in prismatic lens that provides a forward throw distribution. UV stabilized.


PHOTOCELL Button type photocell included for 120V input operation. For other input voltages the photocell must be changed.



Delivered Lumens

HID Equal

17 1,684 70W

25 2,126 100W

CRI = 80+ Color Temperature = 5000 K Input Voltage = 120-277V, 50/60 Hz 120V only when used with photocell.

WPR2- LD 25- 120V- PC Product Series Lamp Type Lamp Wattage Voltage Photocell WPR = Wall Pack Rectangular 2

LD = LED

(LD) 17, 25

120V = 120V

PC = Photocell



Lumenform WPR - Wall Pack Rectangular

LED 13, 32 W Metal Halide Pulse Start 50 – 100 W

High Pressure Sodium 35 – 70 W Fluorescent Quad Tube 1x13, 2x13, 1x26 - 42 W

DESCRIPTION The WPR is an economical and compact low wattage security light. Its integrated photocell allows the unit to turn on automatically at dusk and turn off at dawn. U.L. listed for wet locations.

APPLICATION Ideal for security lighting around commercial, industrial and residential buildings where lower mounting heights are available. Ideal as an automatically operating security light.

BACK PLATE The housing’s back plate is made of high pressure die cast aluminum. The back plate is designed for mounting over an outlet box. A bottom threaded conduit entry hub is also provided for surface conduit wiring.

BALLAST / DRIVER Normal Power Factor, Reactor ballasts for HPS in 120V. Reactor ballasts for Fluorescent 1x13 or 2x13W. Electronic ballasts for Fluorescent 1x26, 32 or 42W in 120V. Universal Voltage (120-277V) electronic drivers for LED. 120V only when photocell is incorporated.

REFLECTOR Aluminum.


HOUSING & LENS For LED and HPS, an injection molded polycarbonate housing mounts onto the back plate with two captive screws. Injection molded prismatic lens, UV stabilized. MP 50 -100 W, FL 1x42W and LED versions come with a die cast aluminum housing and a glass lens.

PHOTOCELL Integrated photocell for automatic operation.

LED DATA LED Watts

System Watts

Delivered Lumens

HID Equal

13 14 1,054 70W

32 38 3,101 150W



WPR- HP 70- 120V- PC- L Product Series Lamp Type Lamp Wattage Voltage Photocell Lamp WPR = Wall Pack Rectangular

LD = LED MP = Metal Halide Pulse Start HP = High Pressure Sodium FL = Fluorescent twin tube or quad tube

(LD) 13, 32 (MP) 50, 70, 100 (HPS) 35, 50, 70 (FL) 113 = 1 x 13W 213 = 2 x 13W 126 = 1 x 26W 132 = 1 x 32W 142 = 1 x 42W

120V = 120V MT = Multi Tap 120/208/240/277V UV = Universal Voltage 120 – 277 V

PC = Photocell

L = Lamp Included



Lumenform WPW - Wall Pack Wedge


High Pressure Sodium 35 – 100 W Fluorescent Quad Tube 1x26 - 42 W

DESCRIPTION The WPW is a compact low wattage wall pack designed for up to LED 63W lamps, HID 100W lamps or 1 x 42W quad tube fluorescent lamps. Its prismatic polycarbonate or glass lens hides the lamp image making this product suitable for lower mounting heights. U.L. listed for wet locations.

APPLICATION Ideal for security lighting around commercial, industrial and residential buildings where lower mounting heights are available. Can be used in entranceways, walkways and for perimeter lighting around buildings.

CONSTRUCTION The housing is made of high pressure die cast aluminum and finished in a dark bronze polyester powder coat paint finish for lasting corrosion resistance. Die formed, anodized aluminum reflector. Silicon rubber gasket for long life. Borosilicate glass lens for LED and MP 100W version. Prismatic polycarbonate refractor for HPS provides uniform distribution at low mounting heights. BALLAST / DRIVER Normal Power Factor, Reactor ballasts for HPS in 120V. Reactor ballasts for Fluorescent 1x13 or 2x13W. Electronic ballasts for Fluorescent 1x26, 32 or 42W in 120V. Universal Voltage (120-277V) electronic drivers for LED.


LED DATA LED Watts

System Watts

Delivered Lumens

HID Equal

23 28 2,578 100W

32 38 3,325 150W

63 77 6,645 250W



WPW- HP 100- 120V- L Product Series Lamp Type Lamp Wattage Voltage Lamp WPW = Wall Pack Wedge


(LD) 23, 32, 63 (MP) 50, 70, 100 (HPS) 35, 50, 70, 100 (FL) 126 = 1 x 26W 132 = 1 x 32W 142 = 1 x 42W

MT = Multi Tap 120/208/240/277V 120V = 120V UV = Universal Voltage 120 – 277 V

L = Lamp Included

OPTIONS WPW-WG – Wire Guard for WPW fixture. WPW-GS – Glare Shield for WPW fixture. PC-XXX – Button Photocell (XXX = specify voltage).



Lumenform F16 - Floodlight LED 16″

Trunnion, Slipfitter, Yoke or Arm Mounting

LED 174, 286 W

DESCRIPTION The F16 is a versatile general purpose LED Floodlight / Arealight which provides equivalent performance to HID 400W and 1000W luminaires. It is offered in Type V optics as well as Type III optics for roadways. Mounting options include Trunnion, Slipfitter, Yoke and Arm mounts. U.L. listed for wet locations.

APPLICATION Suitable for lighting large open areas such as parking lots, storage yards, construction sites, marinas, industrial areas and around buildings. The combination of Type III optics and Arm mounting makes the product comparable to arealighting shoebox luminaires.

CONSTRUCTION The housing is made of high pressure die cast aluminum and finished in a dark bronze polyester powder coat paint finish for lasting corrosion resistance. Clear tempered glass lens, impact and heat resistant.

LED DRIVER Electronic LED driver in high power factor, universal voltage 120-277V, 50/60Hz. Dimmable driver with 0-10V input.

PHOTOCELL Includes a twist lock receptacle with a shorting cap. For automatic operation, order photocell PCTL for 120-277V

MOUNTING Options include Trunnion (small U bracket), die cast aluminum Slipfitter, Yoke (large U bracket) and Arm mounts in 6, 10 and 12 inch lengths.

LED DATA LED Watts

System Watts

Delivered Lumens

HID Equal

174 T5 187 16,964 400W+

174 T3 187 400W+

286 T5 302 25,462 1000W

286 T3 302 1000W


F16- LD 174- UV- SF- T3 Product Series Lamp Type Lamp Wattage Voltage Mounting Lamp F16 = Floodlight LED 16″

LD = LED

(LED) 174, 286 UV = Universal Voltage (120–277 V)

TR = Trunnion SF = Slipfitter YK = Yoke AM6 = Arm Mount 6″ AM10 = Arm Mount 10″ AM12 = Arm Mount 12″

Blank = Type V distribution T3 = Type III distribution

OPTIONS PCTL – Photocell Twist Lock (120-277V operation)



Lumenform FLPB - Floodlight LED PAR Bullet Knuckle Mounting, Hood or Visor,

Flood or Spot optics LED 12 W

FLPB with Hood

FLPB with Visor

DESCRIPTION The FLPB is a traditional PAR bullet with cutting edge LED technology. It is available with either a Hood or Visor and in either Flood (115°) or Spot (30°) optics. It utilizes a 12W LG Innotek outdoor LED module and is comparable to traditional HID 70 – 100W in performance. U.L. listed for wet locations.

APPLICATION Suitable for landscaping applications or to highlight objects such as signage, flags or foliage.

HOUSING The housing is made of high pressure die cast aluminum and finished in either a black or white polyester powder coat paint finish for lasting corrosion resistance. LED modules are dust and water jet tight rated at IP67.

LED DRIVER Electronic LED driver in high power factor, universal voltage 120-277V, 50/60Hz. Minimum starting temperature is -20°F (-30°C).

MOUNTING Versatile knuckle mount allows mounting on walls, floors and into ½″ NPS outlet boxes.

PERFORMANCE LED Wattage = 12 W Total Wattage = 13 W Flood optics = 1345 delivered lumens Spot optics = 1296 delivered lumens LED Brand = LG Innotek LED Quantity = 1 x 12W module CRI = 70+ Color Temperature = 5700 K Input Voltage = 120-277V, 50/60 Hz Comparable to HID = 70 – 100 W


FLPB- LD 12- UV- KM- HF- BLK Product Series

Lamp Type

Lamp Wattage

Voltage Mounting Shroud / Optics Color

FLPB = Floodlight LED PAR Bullet

LD = LED (LED) 12 W UV = Universal Voltage (120–277 V)

KM = Knuckle Mount

HF = Hood with Flood optics HS = Hood with Spot optics VF = Visor with Flood optics VS = Visor with Spot optics

BLK = Black WHT = White

ACCESSORIES FLPTF - Floodlight Pole Top Fitter. Adapter for mounting fixtures with ½″ threaded knuckles to 2 3/8″ pole top tenons. FLSTK - Floodlight Stake. Ground stake for mounting fixtures with ½″ threaded knuckles. Includes a wiring compartment.



Lumenform FT - Floodlight Thousand Watt

Slipfitter, Trunnion or Yoke Mounting LED 252, 315, 378 W

Metal Halide Pulse Start 750 W Metal Halide 1000 W

High Pressure Sodium 1000 W Induction 150W – 2x150 W

DESCRIPTION The FT is a general purpose Floodlight for up to LED 378 W, HID 1000 W lamps or Induction 2 x 150W lamps. It has a wide beam distribution pattern allowing it to be used in almost any floodlighting application where a large amount of light is needed. U.L. listed for wet locations.

APPLICATION Suitable for lighting large open areas such as parking lots, storage yards, construction sites, marinas, industrial areas and around buildings. Can also be used for lighting large facades.


BALLAST / DRIVER High Power Factor, Constant Wattage Autotransformer ballasts. Multi Tap (120/208/240/277V) or 480V ballasts. Minimum starting temperature is -20°F (-30°C) for MP and MH, -40°F (-40°C) for HPS. Universal Voltage (120-277V) electronic drivers for LED and Induction.

MOUNTING Die cast aluminum slipfitter (shown) with dark bronze polyester powder coat paint finish. For use with 2 3/8″ - 3″ O.D. tenons. Also available in Trunnion and Yoke versions.

EPA Effective Projected Area at 45º tilt is 2.74

LED DATA LED Watts

System Watts

Delivered Lumens

HID Equal

252 263 31,130 1000W+

315 320 37,663 1250W+

378 397 45,196 1500W+


FT- MH 1000- MT- SF- L Product Series Lamp Type Lamp Wattage Voltage Mounting Lamp FT = Floodlight Thousand Watt

LD = LED MP = Metal Halide Pulse Start MH = Metal Halide HP = High Pressure Sodium ID = Induction

(LED) 252, 315, 378 (MP) 750 (MH) 1000 (HPS) 1000 (ID) 150, 200, 2x150

MT = Multi Tap 120/208/240/277V 480V = 480V UV = Universal Voltage (120–277 V)

SF = Slipfitter TR = Trunnion YK = Yoke

L = Lamp Included

OPTIONS FT-WG – Wire Guard FT-GS – Glare Shield

FT-VS – Vandal Shield FT-BF – Full Baffle

PC-XXX – Button Photocell (XXX = specify voltage) PCTL-XXX Twist Lock receptacle and photocell (XXX = specify voltage)



Lumenform FH - Floodlight High Wattage

Slipfitter, Trunnion or Yoke Mounting LED 108, 158, 210 W


Induction 80 - 150 W

DESCRIPTION The FH is a general purpose Floodlight for up to LED 210W lamps, HID 400W lamps or Induction 150W lamps. It has a wide beam distribution pattern allowing it to be used in almost any floodlighting application. U.L. listed for wet locations.

APPLICATION Suitable for lighting large open areas such as parking lots, storage yards, construction sites, marinas, industrial areas and around buildings.


BALLAST / DRIVER High Power Factor, Constant Wattage Autotransformer ballasts. Multi Tap (120/208/240/277V) or 480V ballasts. Minimum starting temperature is -20°F (-30°C) for MP, -40°F (-40°C) for HPS. Universal Voltage (120-277V) electronic drivers for LED and Induction.

MOUNTING Die cast aluminum slipfitter (shown) with dark bronze polyester powder coat paint finish. For use with 2 3/8″ - 3″ O.D. tenons. Also available in Trunnion and Yoke versions.


LED DATA LED Watts

System Watts

Delivered Lumens

HID Equal

108 133 12,913 400W

158 178 18,831 750W

210 225 24,500 1000W


FH- MP 400- MT- SF- L Product Series Lamp Type Lamp Wattage Voltage Mounting Lamp FH = Floodlight High Wattage


(LED) 108, 158, 210 (MP) 200, 250, 320, 350, 400 (HPS) 150, 250, 400 (ID) 80, 100, 120, 150


SF = Slipfitter TR = Trunnion YK = Yoke

L = Lamp Included

OPTIONS FH-WG – Wire Guard FH-GS – Glare Shield

FH-VS – Vandal Shield FH-BF – Full Baffle




Lumenform FHM - Floodlight High Wattage

Micro style Slipfitter or Trunnion Mounting


High Pressure Sodium 150 – 400 W Induction 40 - 100 W

DESCRIPTION The FHM is a general purpose Floodlight for up to LED 126W lamps, HID 400W lamps or Induction 100W lamps in a compact size. It has a wide beam distribution pattern allowing it to be used in almost any floodlighting application. U.L. listed for wet locations.

APPLICATION Suitable for lighting large open areas such as parking lots, storage yards, construction sites, marinas, industrial areas and around buildings.



MOUNTING Die cast aluminum slipfitter for use with 2 3/8″ - 3″ O.D. tenons or die formed steel trunnion (shown). Both versions have dark bronze polyester powder coat paint finish.


LED DATA LED Watts

System Watts

Delivered Lumens

HID Equal

63 77 7,532 250W

95 117 11,300 400W

126 150 15,065 450W


FHM- MP 400- MT- TR- L Product Series Lamp Type Lamp Wattage Voltage Mounting Lamp FHM = Floodlight High Wattage Micro style


(LED) 63, 95, 126 (MP) 200, 250, 320, 350, 400 (HPS) 150, 250, 400 (ID) 40, 80, 100


SF = Slipfitter TR = Trunnion

L = Lamp Included

OPTIONS FHM-WG – Wire Guard FHM-GS – Glare Shield FHM-VS – Vandal Shield

PC-XXX – Button Photocell (XXX = specify voltage) FHM-SWB (Swivel Wall Bracket. Must be used with TR mounting)



Lumenform FM2 - Floodlight Medium Wattage

Knuckle Mounting LED 37, 42, 63 W



DESCRIPTION The FM2 is a rugged and compact floodlight for up to LED 63W lamps, HID 150W lamps or Fluorescent 2 x 42W lamps. U.L. listed for wet locations.

APPLICATION Suitable for applications such as facades, signs, landscape lighting and security lighting around buildings.

CONSTRUCTION The housing is made of high pressure die cast aluminum and finished in a dark bronze polyester powder coat paint finish for lasting corrosion resistance. Die formed, anodized aluminum reflector available in wide beam or spot reflector. Silicon rubber gasket for long life. Clear tempered glass lens, impact and heat resistant.

BALLAST / DRIVER High Power Factor, Constant Wattage Autotransformer ballasts. Multi Tap (120/208/240/277V) or 480V ballasts. Reactor 120V ballasts for HPS. Minimum starting temperature is -20°F (-30°C) for MP, -40°F (-40°C) for HPS. Universal Voltage (120-277V) electronic drivers for LED.


LED DATA LED Watts

System Watts

Delivered Lumens

HID Equal

37 41 3,390 150W

42 50 5,319 200W

63 77 7,532 250W


FM2- MP 150- MT- KM-

SP-

L Product Series Lamp Type Lamp Wattage Voltage Mounting Reflector Lamp FM2 = Floodlight Medium Wattage



MT = Multi Tap 120/208/240/277V UV = Universal Voltage (120–277 V) 120V = 120V 480V = 480V

KM = Knuckle Mounting

Blank = Wide Beam SP = Spot Reflector

L = Lamp Included



Lumenform FAR – Floodlight

Architectural Round back Knuckle Mounting



Induction 40 W

DESCRIPTION The FAR floodlight is an architecturally appealing lighting instrument with superior form and fit. While made of rugged, long lasting materials, it’s rounded back design and soft rounded edges make it architecturally desirable even in high visibility areas. Suitable for up to LED 63W, up to HID 150W lamps, Fluorescent 1 x 42W lamps and Induction 40W lamps. U.L. listed for wet locations.

APPLICATION Suitable for applications such as facades, signs, landscape lighting and security lighting around buildings. Use where an architecturally pleasing fixture is desired due to day time visibility.

CONSTRUCTION The housing is made of high pressure die cast aluminum and finished in a textured dark bronze polyester powder coat paint finish for lasting corrosion resistance. Computer designed, die formed, anodized aluminum reflector is designed for low glare and high efficiency. Door frame is held on with a continuous piano hinge and closes with stainless steel captive hardware resulting in a precise and secure fit. Silicone rubber gasket for long life. Clear tempered glass, impact and heat resistant.

BALLAST High Power Factor, Constant Wattage Autotransformer ballasts, Multi Tap (120/208/240/277V) or reactor 120V ballasts for HPS. Minimum starting temperature is -20°F (-30°C) for MP, -40°F (-40°C) for HPS. Electronic ballasts for Fluorescent 1x26, 32 or 42W in Dual Tap (120/277V).

MOUNTING Heavy duty, versatile knuckle mount allows mounting on walls, floors and into ½″ NPS outlet boxes.

LED DATA LED Watts

System Watts

Delivered Lumens

HID Equal

40 44 3777 150W

42 50 5319 250W

63 77 7532 320W

CRI = 70+ Color Temperature = 5000+ K Input Voltage = 120-277V, 50/60 Hz


FAR- MP 150- MT- KM- L Product Series Lamp Type Lamp Wattage Voltage Mounting Lamp FAR = Floodlight Architectural Round Back

LD = LED MP = Metal Halide Pulse Start HP = High Pressure Sodium FL = Fluorescent quad tube ID = Induction


MT = Multi Tap 120/208/240/277V DT = Dual Tap 120/277 V 120V = 120V UV = Universal Voltage 120 – 277 V 50/60 Hz


L = Lamp Included

OPTIONS FAR-WG – Wire guard FAR-GS – Glare Shield FAR-VS – Vandal Shield



Lumenform FL - Floodlight Low Wattage

Knuckle Mounting LED 22 W



DESCRIPTION The FL is a compact floodlight for lower wattages. U.L. listed for wet locations.

APPLICATION Ideal for all low wattage floodlighting applications in commercial, industrial and residential areas. Can be used for floodlighting signs, objects and for security lighting around buildings. An energy saving alternative to twin PAR lamp fixtures.

HOUSING The housing is made of high pressure die cast aluminum and finished in a dark bronze polyester powder coat paint finish for lasting corrosion resistance. Housing is slightly deeper for MP 70-100W.

CONSTRUCTION The housing is made of high pressure die cast aluminum and finished in a dark bronze polyester powder coat paint finish for lasting corrosion resistance. Housing is slightly deeper for MP 70-100W. BALLAST High Power Factor, Constant Wattage Autotransformer ballasts, Multi Tap (120/208/240/277V) or reactor 120V ballasts for HPS. Minimum starting temperature is -20°F (-30°C) for MP, -40°F (-40°C) for HPS. Electronic ballasts for Fluorescent 1x26, 32 or 42W in Dual Tap (120/277V). Universal Voltage (120-277V) electronic drivers for LED.


REFLECTOR Die formed, anodized aluminum.

LENS Clear tempered glass, impact and heat resistant.

LED DATA LED Wattage = 22 W Total Wattage = 25 W LED Lumens = 2719 lumens Delivered Lumens = 2288 lumens CRI = 72 Color Temperature = 5000 K Input Voltage = 120–277 V, 50/60 Hz


FL- HP 150- 120V- KM- L Product Series Lamp Type Lamp Wattage Voltage Mounting Lamp FL = Floodlight Low Wattage


(LED) 22 (MP) 50, 70, 100 (HPS) 35, 50, 70, 100, 150 (FL) 126 = 1 x 26W 132 = 1 x 32W 142 = 1 x 42W

MT = Multi Tap 120/208/240/277V DT = Dual Tap 120/277 V 120V = 120V UV = Universal Voltage 120 – 277 V


L = Lamp Included



Lumenform FS - Floodlight Sportslight

Metal Halide 1000 - 1500 W High Pressure Sodium 1000 W

DESCRIPTION

The FS is an exceptional sports lighting floodlight for up to 1500W lamps. U.L. listed for wet locations.

APPLICATION

Suitable for sports lighting applications as well as general floodlighting of large outdoor areas where a high light level is needed. Can be aimed upwards for facade lighting.

HOUSING

The ballast housing is a combination of die cast and hydroformed aluminum and finished in a dark bronze polyester powder coat paint finish for lasting corrosion resistance. The ballast and socket housings are separated for cooler operation and longer life.

BALLAST

High Power Factor, Constant Wattage Autotransformer ballasts. Multi Tap (120/208/240/277V) or 480V ballasts. Minimum starting temperature is -20°F (-30°C) for MH and -40°F (-40°C) for HPS.

SOCKET

Mogul base, 4KV pulse rated porcelain socket.

MOUNTING

Integral 5/8″ mounting bolt allows mounting directly to cross arm. Exposed bolt length is 1 ¾″. Also available in an optional Yoke Mount version.

REFLECTOR Precision spun anodized aluminum. Available in NEMA floodlighting beam patterns of 33, 44, 55, and 66.

GASKET


LENS

Clear tempered glass, impact and heat resistant. Secured with three stainless steel latches. Safety chain provided for additional security during relamping.

EPA Effective Projected Area is 2.5.


FS- MH 1500- MT- 66- L Product Series Lamp Type Lamp Wattage Voltage Beam Spread Lamp FS = Floodlight Sportslight

MH = Metal Halide HP = High Pressure Sodium

(MH) 1000, 1500 (HPS) 1000

MT = Multi Tap 120/208/240/277V 480V = 480V

33 = NEMA 3 x 3 44 = NEMA 4 x 4 55 = NEMA 5 x 5 66 = NEMA 6 x 6

L = Lamp Included

OPTIONS FS-Lamp Support Lamp support for high vibration applications. FS-PTF Pole Top Fitter to mount FS to 2 3/8″ - 3″ O.D. tenons.

FS-YKH Yoke mount with handle.



Lumenform DD – Dusk to Dawn

LED 35, 50 W

Arm Mount (included)

Wall Mount

DESCRIPTION The DD is a complete LED dusk to dawn lighting fixture package including fixture, energy saving LED’s, arm mount and twist lock photocell. Available in LED 35W for comparable performance to HID 100W or LED 50W for comparable performance to HID 175+W. U.L. listed for wet locations.

APPLICATION Ideal for security lighting, area lighting or parking lot lighting, or can be used as a streetlight in rural areas. The included photocell allows the unit to turn on automatically at dusk and turn off at dawn.

CONSTRUCTION The housing is made of high pressure die cast aluminum and finished in a dark bronze polyester powder coat paint finish for lasting corrosion resistance. Injection molded polycarbonate lens. High grade weatherproof silicon rubber gasket for long life.


PHOTOCELL Twist lock photocell included.

MOUNTING Can be wall mounted or arm mounted with the included 90° extension arm and mounting bracket. LED DATA

System Watts

Delivered Lumens

HID Equal

35 2,575 100W

50 4,272 175+W



DD- LD 50- UV Product Series Lamp Type Lamp Wattage Voltage DD = Dusk to Dawn LD = LED

(LED) 35, 50 UV = Universal Voltage

120 – 277 V



Lumenform ASB – Arealighting Shoe Box

Arm Mounting LED 108, 158, 210 W

Metal Halide Pulse Start 200 - 400 W High Pressure Sodium 150 - 400 W


DESCRIPTION The ASB is an aesthetic Arealighting Shoe Box for up to LED 210W lamps, HID 400W lamps or 150W Induction lamps. It comes with a 6″ arm for mounting on poles. U.L. listed for wet locations.

APPLICATION Ideal for lighting parking lots and other large open areas where aesthetics are important.



MOUNTING 6″ (150 mm) Die cast aluminum arm with dark bronze polyester powder coat paint finish. Optional 12″ or 18″ mounting arms.

EPA Effective Projected Area at 0º tilt is 0.95 (includes mounting arm).

LED DATA LED Watts

System Watts

Delivered Lumens

HID Equal

108 133 12,913 400W

158 178 18,831 750W

210 225 24,500 1000W


ASB- MP 400- MT- AM- L Product Series Lamp Type Lamp Wattage Voltage Mounting Lamp ASB = Arealighting Shoe Box


(LED) 108, 158, 210 (MP) 200, 250, 320, 350, 400 (HPS) 150, 250, 400 (ID) 80, 100, 120, 150


AM = Arm Mounting Square Poles AMR = Arm Mounting Round Poles

L = Lamp Included

OPTIONS ASB-AM12 – 12″ mounting arm. ASB-AM18 – 18″ mounting arm.




Lumenform ASBT – Arealighting Shoe Box

Thousand Watt - Arm Mounting LED 252, 315, 378 W

Metal Halide Pulse Start 750 W Metal Halide 1000 W

High Pressure Sodium 1000 W Induction 150W – 2x150 W

DESCRIPTION The ASB is an aesthetic Arealighting Shoe Box for up to LED 378 W, HID 1000 W lamps or Induction 2 x 150W lamps. It comes with a 6″ arm for mounting on poles. U.L. listed for wet locations.

APPLICATION Ideal for lighting parking lots and other large open areas where aesthetics are important and higher mounting heights are available.



MOUNTING 6″ (150 mm) Die cast aluminum arm with dark bronze polyester powder coat paint finish. Optional 12″ or 18″ mounting arms.

EPA Effective Projected Area at 0º tilt is 1.64 (includes mounting arm).

LED DATA LED Watts

System Watts

Delivered Lumens

HID Equal

252 263 30,130 1000W+

315 320 37,663 1250W+

378 397 45,196 1500W+


ASBT- MH 1000- MT- AM- L Product Series Lamp Type Lamp Wattage Voltage Mounting Lamp ASB = Arealighting Shoe Box Thousand Watt

LD = LED MP = Metal Halide Pulse Start MH = Metal Halide HP = High Pressure Sodium ID = Induction

(LED) 252, 315, 378 (MP) 750 (MH) 1000 (HPS) 1000 (ID) 150, 200, 2x150


AM = Arm Mounting Square Poles AMR = Arm Mounting Round Poles

L = Lamp Included

OPTIONS ASB-AM12 – 12″ mounting arm. ASB-AM18 – 18″ mounting arm.




Lumenform BLR – Bollard Round

LED 15 W Metal Halide Pulse Start 35 - 100 W

High Pressure Sodium 35 - 100 W Fluorescent Quad Tube 26 - 42 W

Dome Top Flat Top

DESCRIPTION The BLR series is an aesthetic and architectural series of round bollards for up to LED 15W lamps, HID 100W lamps or Fluorescent quad tube 1 x 42W lamp applications. U.L. listed for wet locations.

APPLICATION Suitable for lighting of walkways, pathways, plazas, pedestrian areas and near building entrances where an aesthetic clean look is desired.

MOUNTING Mounting bracket with anchor bolts included.

HOUSING The main shaft is extruded aluminum and the top section is made of high pressure die cast aluminum. Available in Black (BLK), White (WHT) or Architectural Bronze (BRZ) polyester powder coat paint finishes for lasting corrosion resistance. Recessed vandal resistant screws provide a clean finished look. Available in standard 42″ height for Dome Top versions and 41″ height for Flat Top versions. Can be custom manufactured to specified height All versions include a clear polycarbonate lens with internal optics.

OPTICAL Available in four versions. IR – Internal Reflector (adjustable) IL – Internal Louver G3 – Glass with type 3 distribution G5 – Glass with type 5 distribution IR and IL versions are Dark Sky compliant.

LED DATA LED Wattage = 15 W Total Wattage = 17 W LED Lumens = 2089 lumens Delivered Lumens = 1384 lumens for IR version. Varies for other optical versions. CRI = 83 Color Temperature = 5000 K Input Voltage = 120–277 V, 50/60 Hz


BLR- MP 100- MT-

427

DT

IR- L

Product Lamp Type Lamp

Wattage Voltage Height, Dia Top Optical Lamp

BLR = Bollard Round


(LED) 15 (MP) 35, 50, 70, 100 (HPS) 35, 50, 70,100 (FL) 26 = 26W 32 = 32W 42 = 42W

MT = Multi Tap 120/208/240/277V DT = Dual Tap 120/277V 120V = 120V UV = Universal Voltage (120–277 V)

Dome Top 427 = 42” x 7” Flat Top 417 = 41” x 7”

DT = Dome Top FT = Flat Top

IR = Internal Refl. IL = Internal Louvers G3 = Glass Type 3 G5 = Glass Type 5

L = Lamp Included



Lumenform VPB – Vapor Proof Box mount VPP – Vapor Proof Pendant mount VPW – Vapor Proof Wall mount

LED 12 W Metal Halide Pulse Start 50 – 70 W High Pressure Sodium 35 – 150 W

Fluorescent 26 - 42 W Incandescent 200 - 300 W

Incandescent LED, HID and

Fluorescent Incandescent LED, HID and

Fluorescent Incandescent LED, HID and

Fluorescent VPB

Vapor Proof Box mount VPP

Vapor Proof Pendant mount VPW

Vapor Proof Wall mount

DESCRIPTION The VP series of Vapor Proof luminaires come with cast aluminum guards and tempered glass lenses. Incandescent versions include 200 W or 300 W sizes. APPLICATION These heavy duty luminaires are designed for non hazardous and non classified wet location environments. Suitable for applications such as factories, cold storage and foundries. HOUSING & GUARD The housing and guard are made of high pressure die cast aluminum and finished in a gray polyester powder coat paint finish for lasting corrosion resistance. One piece guard screws onto the housing for a secure and vapor tight fit.

GLOBE Heat resistant clear glass. Optional frosted glass, consult factory. GASKET Silicone rubber for long life and superior vapor proof seal. ENTRY HUBS For Incandescent versions the entry hubs are ½″ or ¾″. For LED, HID and fluorescent versions the entry hubs are 1″. For the VPB and VPW versions the threaded entry hubs can be used for through wiring.

MOUNTING VPB – Vapor Proof Box mount version is for ceiling mounting over a junction box. It has heavy duty cast tabs for mounting. VPP – Vapor Proof Pendant mount version is for pendant mounting with conduit. VPW – Vapor Proof Wall mount version in suitable for mounting on a wall. It has heavy duty cast tabs for mounting. LED DATA LED Wattage = 12 W LED Lumens = 1345 lumens CRI = 70+ Color Temperature = 5700 K (Consult factory for other color temperatures) Input Voltage = 120-277V, 50/60 Hz


VPB- FL 42- DT L Product Series Lamp Type Lamp Wattage Voltage Lamp VPB = Vapor Proof Box mount VPP = Vapor Proof Pendant mount VPW = Vapor Proof Wall mount

LD = LED MP = Metal Halide Pulse Start HP = High Pressure Sodium FL = Fluorescent quad tube IN = Incandescent

(LED) 12 (MP) 50, 70 (HPS) 35, 50, 70, 100, 150 (FL) 26, 32, 42 (IN) 200, 300

(LED) UV 120-277V (MP) DT =120/277V (HPS) 120V = 120V (FL) DT =120/277V (IN) Blank

L = Lamp Included For MP, HP and FL



Lumenform VPL – Vapor Proof Linear

LED 42 W

DESCRIPTION The VPL is an energy saving LED vapor proof luminaire which is also vandal resistant with its tough polycarbonate body and lens. U.L. listed for wet locations.

APPLICATION Designed for commercial, institutional and industrial areas where water spray will land on the fixture. IP65 rated. Can be used in interior or exterior applications. Designed for surface mounting. Optional occupancy sensors available. Ideal for cold storage applications.

CONSTRUCTION The back housing is made of gray polycarbonate for toughness and corrosion resistance. Eight stainless steel clips secure the lens to the body for a watertight IP65 rated fit. The lens is an opal polycarbonate for uniform light diffusion and toughness.


LED DATA LED Wattage = 42 W Total Wattage = 43.3 W Delivered Lumens = 4014 lumens CRI = 80+ Color Temperature = 5150 K Input Voltage = 120-277V, 50/60 Hz Comparable to HID = 150 - 200 W


VPL- LD 42- UV- 4P Product Series Lamp Type Lamp Wattage Voltage Housing VPL = Vapor Proof Linear

LD = LED

(LED) 42 UV = Universal Voltage 120 – 277 V

4P = 4′ length Polycarbonate

OPTIONS OSWL-L3 - Occupancy Sensor, Wet Location. 40′ diameter coverage from 20′ height.

OSWL-L4 - Occupancy Sensor, Wet Location. 60′ diameter coverage from 40′ height.



Lumenform CS12 – Canopy Square 12″

LED 41, 55 W

Standard (no Sensor) With Occupancy Sensor Standard (no Sensor) With Occupancy Sensor

DESCRIPTION The CS12 is a slim canopy / garage light which comes with an optional Occupancy Sensor. Available in LED 41 or 55W versions for comparable performance to HID 175 - 250W. U.L. listed for wet locations.

APPLICATION Suitable for indoor or outdoor applications such as covered parking garages, gasoline stations, cold storage rooms and areas under a canopy such as walkways, underpasses and loading docks. Its slim 2 ½″ depth make it ideal for low ceiling applications. The optional Occupancy Sensor with integrated photocell allows automatic operation with a variety of programmable parameters.

CONSTRUCTION The housing is made of formed aluminum and finished in a white polyester powder coat paint finish for lasting corrosion resistance. UV stabilized clear lens.

LED DRIVER Electronic LED driver available in universal voltage 120-277V input, 50/60 Hz. 0-10V Dimmable Driver standard.

OCCUPANY SENSOR Includes WattStopper® FSP-211 occupancy sensor with integrated photocell and multiple programmable parameters including:

Motion Sensing

Line voltage On/Off control

Photocell function with adjustable sensitivity

0-10VDC dimming

Adjustable high and low dimmed levels

Adjustable time delays (5-30 min.)

Adjustable ramp up and fade down times

Includes WattStopper® L2 sensor lens which provides 48′ diameter coverage at an 8′ mounting height.

LED DATA

LED Watts

System Watts

Delivered Lumens

HID Equal

41 41.5 4,575 175-200W

55 57.3 6,069 250W

CRI = 74 Color Temperature = 5000 K. Input Voltage = 120-277V, 50/60 Hz Dimming = 0-10 VDC.


CS12- LD 55- UV- OS Product Series Lamp Type Lamp Wattage Voltage Sensor CS12 = Canopy Square 12″

LD = LED


Blank = Standard version (no Occupancy Sensor) OS = Occupancy Sensor (For 55W version only)



Lumenform CLL – Canopy LED Large

LED 84 or 126 W

DESCRIPTION The CLL is a heavy duty canopy light for higher ceiling heights and specifically designed for LED’s. It provides a combination of energy savings with long life LED lamps. Offered in two wattages to be comparable to traditional HID 250W and 350W in performance. U.L. listed for wet locations.

APPLICATION Ideally suited for high ceiling applications like gasoline stations, retail stores, auto show rooms, parking garages and cold storage rooms. Can also be used as a decorative low bay / high bay fixture.

CONSTRUCTION The housing is made of high pressure die cast aluminum and finished in a white polyester powder coat paint finish for lasting corrosion resistance. High transparency tempered glass lens for maximum light output. Silicon rubber gaskets. Dust and water jet tight rated at IP65.

LED DRIVER Electronic LED driver in high power factor, universal voltage 120-277V, 50/60Hz. Minimum starting temperature is -20°F (-30°C). Step down transformers available for 480V operation.

QUICK MOUNT SYSTEM Contractor friendly Quick Mount System allows fixture to hang while electrical connections are made. Can be surface or pendant mounted.

Catalog Number

Number of LED’s

LED Wattage

Total System Wattage

Delivered Lumens

CRI Color Temp.

Comparable To HID

CLL-LD84-UV 40 84 95 6788 75 + 4700 K 250 W

CLL-LD126-UV 60 126 138 10388 75 + 4700 K 320 - 350 W


CLL- LD 126- UV Product Series Lamp Type Lamp Wattage Voltage CLL = Canopy LED Large

LD = LED (LED) 84, 126 W UV = Universal Voltage (120–277 V) 480V = 480V



Lumenform CLS – Canopy LED Small

LED 45, 70 W

DESCRIPTION The CLS is a compact and slim Canopy Light for LED lamps. Available in LED 45W or 70W for comparable performance to HID 175W or 250W. Its rugged die cast aluminum housing and tough polycarbonate lens make it ideal for high abuse, vandalism prone areas. U.L. listed for wet locations.

APPLICATION Suited for public areas such as underpasses, parking garages, cold storage rooms, building perimeters, schools, corridors and stairwells.

CONSTRUCTION The housing is made of high pressure die cast aluminum and finished in a dark bronze polyester powder coat paint finish for lasting corrosion resistance. Tough injection molded prismatic polycarbonate lens for extra impact resistance. UV stabilized. Silicone rubber gaskets for long life.

MOUNTING Contractor friendly Quick Mount System allows fixture to hang while electrical connections are made. Can also be surface conduit wired through 1/2″ threaded hubs or pendant mounted with 3/4″ pendant.



Delivered Lumens

HID Equal

45 4,150 175W

70 5,928 250W



CLS- LD 45- UV Product Series Lamp Type System Wattage Voltage CLS = Canopy LED Small

LD = LED (LED) 45, 70 UV = Universal Voltage 120 – 277 V



Lumenform PGL – Parking Garage Luminaire

LED 55 W Metal Halide Pulse Start 70 – 150 W

High Pressure Sodium 70 – 150 W Fluorescent Quad Tube 1 x 42 W

DESCRIPTION The PGL is an architectural grade luminaire for parking garage applications. Available in energy saving LED 55W or HID up to 150W and Fluorescent quad tube 1 x 42W lamps. U.L. listed for wet locations.

APPLICATION Suited for indoor and covered parking garages and areas under a canopy such as walkways, underpasses and loading docks.

CONSTRUCTION The housing is made of high pressure die cast aluminum and finished in a white polyester powder coat paint finish for lasting corrosion resistance. Die formed one piece anodized aluminum reflector for maximizing efficiency. Silicone rubber gaskets for long life. Precision injection molded prismatic acrylic lens. UV stabilized. Upper lens section throws some up light to avoid the “cave effect” in garages. Contractor friendly Quick Mount System allows fixture to hang while electrical connections are made. Can be surface or pendant mounted.

BALLAST (for MP, HPS and FL) High Power Factor, Constant Wattage Autotransformer ballasts, Multi Tap (120/208/240/277V) or reactor 120V ballasts for HPS. Minimum starting temperature is -20°F (-30°C) for MP, -40°F (-40°C) for HPS. Electronic ballasts for Fluorescent 1 x 42W in Universal Voltage (120 - 277V).

LED DRIVER Electronic LED driver in high power factor, universal voltage 120-277V, 50/60Hz. Minimum starting temperature is -20°F (-30°C).

PERFORMANCE – LED SYSTEM LED Wattage = 55 W Total Wattage = 73 W LED Lumens = 5832 lumens Fixture Lumens = 4522 lumens LED Brand = CREE XTE R2 LED Quantity = 26 CRI = 75+ Color Temperature = 4700 K Input Voltage = 120-277V, 50/60 Hz Comparable to HID = 175 to 200W


PGL- MP 150- MT- L Product Series Lamp Type Lamp Wattage Voltage Lamp PGL = Parking Garage Luminaire


(LED) 55 (MP) 70, 100, 150 (HPS) 70, 100, 150 (FL) 142 = 1 x 42W

MT = Multi Tap 120/208/240/277V UV = Universal Voltage 120 – 277V 120V = 120V 480V = 480V

L = Lamp Included



Lumenform VSM - Vandal Resistant

Surface Mount - Medium LED 22, 45, 63, 95 W


Fluorescent Quad Tube 2 x 26 - 42 W Induction 40 W

DESCRIPTION The VSM is a 12″ x 12″ Vandal Resistant Surface Mounting fixture for up to LED 95W lamps, HID 150W lamps, Fluorescent quad tube 2 x 42W lamps or Induction 40W lamps. Its rugged die cast aluminum housing and tough polycarbonate lens make it ideal for high abuse, vandalism prone areas. U.L. listed for wet locations.


CONSTRUCTION The housing is made of high pressure die cast aluminum and finished in a dark bronze polyester powder coat paint finish for lasting corrosion resistance. The reflector is made of die formed cold rolled steel with a high reflectance white polyester powder coat paint finish. Silicon rubber gasket for long life. The lens is made of tough injection molded polycarbonate for extra impact resistance. UV stabilized.

BALLAST / DRIVER High Power Factor, Constant Wattage Autotransformer ballasts. Multi Tap (120/208/240/277V) or 480V ballasts. Reactor 120V ballasts for HPS. Minimum starting temperature is -20°F (-30°C) for MP, -40°F (-40°C) for HPS. Universal Voltage (120-277V) electronic drivers for LED and induction.

LED DATA LED Watts

System Watts

Delivered Lumens

HID Equal

22 25 2329 100W

45 53 5138 200W

63 77 6203 250W

95 117 9305 350W



VSM- MP 150- MT- L Product Series Lamp Type Lamp Wattage Voltage Lamp VSM = Vandal Resistant Surface Mount Medium


(LED) 22, 45, 63, 95 (MP) 50, 70, 100, 150 (HPS) 35, 50, 70, 100, 150 (FL) 226 = 2 x 26W 232 = 2 x 32W 242 = 2 x 42W (ID) 40

MT = Multi Tap 120/208/240/277V UV = Universal Voltage (120–277 V) 120V = 120V 480V = 480V

L = Lamp Included



Lumenform VSMD - Vandal Resistant Surface

Mount Medium with Deep Lens Metal Halide Pulse Start 200 W

Induction 80 W

DESCRIPTION The VSMD is a 12″ x 12″ Vandal Resistant Surface Mounting fixture for up to MP 200W or Induction 80W lamps. It has a deeper lens than the VSM fixture allowing for the higher wattage lamps. Its rugged die cast aluminum housing and tough polycarbonate lens make it ideal for high abuse, vandalism prone areas. U.L. listed for wet locations.

APPLICATION Suited for public areas such as underpasses, parking garages, cold storage rooms, building perimeters, schools, corridors and stairwells. The Induction 80W version makes an ideal energy saving and long life alternative to traditional MH 175W or MP 150W canopy lights for parking garage applications.

HOUSING The housing is made of high pressure die cast aluminum and finished in a dark bronze polyester powder coat paint finish for lasting corrosion resistance.

BALLAST High Power Factor, Constant Wattage Autotransformer ballasts, Multi Tap (120/208/240/277V) ballasts. The minimum starting temperature is -20°F (-30°C) for MP.

SOCKET Medium base, 4KV pulse rated porcelain socket for HID lamps.

REFLECTOR Die formed cold rolled steel with a high reflectance white polyester powder coat paint finish.


LENS Tough injection molded polycarbonate for extra impact resistance. UV stabilized. Deeper lens for cooler operation of MP 200W and Induction 80W lamps.


VSMD- ID 80- 120V- L Product Series Lamp Type Lamp Wattage Voltage Lamp VSMD = Vandal Resistant Surface Mount Medium Deep Lens

MP = Metal Halide Pulse Start ID = Induction

(MP) 200 (ID) 80

MT = Multi Tap 120/208/240/277V 120V = 120V 277V = 277V

L = Lamp Included



Lumenform VSS - Vandal Resistant Surface Mount - Small

LED 32 W Metal Halide Pulse Start 50 - 70 W High Pressure Sodium 70 - 150 W

Fluorescent Twin Tube 2 x 13 W Fluorescent Quad Tube 1 x 26 - 42 W

DESCRIPTION The VSS is a 9″ x 9″ Vandal Resistant Surface Mounting fixture for up to LED 32W lamps, MP 70W, HPS 150W, Fluorescent twin tube 2 x 13W or Fluorescent quad tube 1 x 42W lamps. Its rugged die cast aluminum housing and tough polycarbonate lens make it ideal for high abuse, vandalism prone areas. U.L. listed for wet locations.




LED DATA LED Wattage = 32 W Total Wattage = 38 W Delivered Lumens = 3101 lumens CRI = 70+ Color Temperature = 5700 K Input Voltage = 120-277V, 50/60 Hz Comparable to HID = 150 W


VSS- MP 70- DT- L Product Series Lamp Type Lamp Wattage Voltage Lamp VSS = Vandal Resistant Surface Mount Small

LD = LED MH = Metal Halide Pulse Start HP = High Pressure Sodium FL = Fluorescent twin/quad tube

(LED) 32 (MP) 50, 70 (HPS) 70, 100, 150 (FL) 213 = 2 x 13W 126 = 1 x 26W 132 = 1 x 32W 142 = 1 x 42W

MT = Multi Tap 120/208/240/277V UV = Universal Voltage (120–277 V) DT = Dual Tap120/277V 120V = 120V

L = Lamp Included



Lumenform VSR - Vandal Resistant

Surface Mount - Rectangular Fluorescent Twin Tube 1 x 7-13 W

Incandescent 75 W

DESCRIPTION

The VSR is a 5″ x 8″ Vandal Resistant Surface Mounting Rectangular fixture for up to Fluorescent twin tube 1 x 13W, or incandescent lamps up to 75W. Its tough polycarbonate lens makes it ideal for high abuse, vandalism prone areas. U.L. listed for wet locations.

APPLICATION

Suited for public areas such as underpasses, parking garages, cold storage rooms, building perimeters, schools, corridors and stairwells.

HOUSING

The back plate is made of steel and finished in a dark bronze polyester powder coat paint finish for lasting corrosion resistance.

BALLAST

Normal Power Factor, Reactor 120V ballast for fluorescent twin tube 1x7W or 1x13W lamps.

SOCKET

Medium base porcelain socket for incandescent lamps. Positive latching thermoplastic socket for fluorescent lamps.

REFLECTOR

Anodized aluminum reflector for high efficiency.

GASKET


LENS

Tough injection molded prismatic polycarbonate for extra impact resistance. UV stabilized.


VSR- FL 113- 120V- L Product Series Lamp Type Lamp Wattage Voltage Lamp VSR = Vandal Resistant Surface Mount Rectangular

FL = Fluorescent twin tube IN = Incandescent

(FL) 17 = 1 x 7W 113 = 1 x 13W (IN) 75W max.

120V = 120V

L = Lamp Included (for FL version only)



Lumenform VREL - Vandal Resistant Entry Light

LED 19 W Fluorescent Twin Tube 2 x 13 W

DESCRIPTION

The VREL is a 5″ x 13″ Vandal Resistant Entry Light for up to LED 19W or Fluorescent twin tube 2 x 13W lamps. Its rugged die cast aluminum housing and tough polycarbonate lens make it ideal for high abuse, vandalism prone areas. U.L. listed for wet locations.

APPLICATION

Suited for use as an entry light positioned above or beside doorways and entrances in public areas.

HOUSING

The housing is made of high pressure die cast aluminum and finished in a dark bronze polyester powder coat paint finish for lasting corrosion resistance. Optional white finish.

BALLAST / DRIVER

Universal Voltage (120-277V) electronic drivers for LED. Normal Power Factor, Reactor 120V ballast for fluorescent twin tube 13W lamps.

SOCKET

Positive latching thermoplastic socket for fluorescent lamps.

REFLECTOR

Galvanized steel back doubles as a reflector.

GASKET


LENS

Tough injection molded polycarbonate for extra impact resistance. UV stabilized.

LED DATA LED Wattage = 19 W Total Wattage = 24 W Delivered Lumens = 2399 lumens CRI = 70+ Color Temperature = 5000 K Input Voltage = 120-277V, 50/60 Hz Comparable to HID = 100 W


VREL- FL 213- 120V- L Product Series Lamp Type Lamp Wattage Voltage Lamp VREL = Vandal Resistant Entry Light

LD = LED FL = Fluorescent Twin tube

(LD) 19 (FL) 213 = 2 x 13W

UV = Universal Voltage (120–277 V) 120V = 120V

L = Lamp Included



Lumenform VRC11 - Vandal Resistant Circular 11″

LED 21, 63, 95, 126 W Metal Halide Pulse Start 70 - 100 W

High Pressure Sodium 70 - 100 W Fluorescent Quad Tube 1 x 26 - 42 W

DESCRIPTION The VRC11 is an 11″ diameter Vandal Resistant Circular fixture for up to LED 126W lamps, HID 100W lamps or Fluorescent quad tube 1 x 42W lamps. Its rugged spun aluminum housing and tough polycarbonate lens make it ideal for high abuse, vandalism prone areas. U.L. listed for wet locations.




LED DATA LED Watts

System Watts

Delivered Lumens

HID Equal

21 25 2190 100W

63 77 6203 250W

95 117 9305 350W

126 150 12406 400W



VRC11- MP 100- DT- L Product Series Lamp Type Lamp Wattage Voltage Lamp VRC11 = Vandal Resistant Circular 11″


(LD) 21, 63, 95, 126 (MP) 50, 70, 100 (HPS) 35, 50, 70, 100 (FL) 126 = 1 x 26W 132 = 1 x 32W 142 = 1 x 42W

MT = Multi Tap 120/208/240/277V UV = Universal Voltage (120–277 V) DT = Dual Tap120/277V 120V = 120V 480V = 480V

L = Lamp Included



Lumenform VRC15 - Vandal Resistant Circular 15″



DESCRIPTION

The VRC15 is a 15″ diameter Vandal Resistant Circular fixture for up to HID 150W lamps or Fluorescent quad tube 2 x 42W lamps. Its rugged spun aluminum housing and tough polycarbonate lens make it ideal for high abuse, vandalism prone areas. U.L. listed for wet locations.

APPLICATION

Suited for public areas such as underpasses, parking garages, cold storage rooms, building perimeters, schools, corridors and stairwells.

HOUSING

The housing is made of spun aluminum and finished in a dark bronze polyester powder coat paint finish for lasting corrosion resistance.

BALLAST

High Power Factor, Constant Wattage Autotransformer ballasts, Multi Tap (120/208/240/277V) or reactor 120V ballasts for HPS. Minimum starting temperature is -20°F (-30°C) for MP, -40°F (-40°C) for HPS. Electronic ballasts for Fluorescent 2x26, 32 or 42W in Dual Tap (120/277V).

SOCKET

Medium base, 4KV pulse rated porcelain socket for HID lamps. Positive latching thermoplastic socket for fluorescent lamps.

REFLECTOR

Die formed anodized aluminum reflector for higher efficiency.

GASKET


LENS

Tough injection molded polycarbonate for extra impact resistance. UV stabilized.


VRC15- MP 150- MT- L Product Series Lamp Type Lamp Wattage Voltage Lamp VRC15 = Vandal Resistant Circular 15″

MP = Metal Halide Pulse Start HP = High Pressure Sodium FL = Fluorescent quad tube

(MP) 70, 100, 150 (HPS) 70, 100, 150 (FL) 226 = 2 x 26W 232 = 2 x 32W 242 = 2 x 42W


L = Lamp Included



Lumenform VGLR - Vandal Resistant

Garage Light Round LED 54, 95, 126, 189 W


Fluorescent Quad Tube 2 x 26 - 42 W Induction 40 - 80 W

DESCRIPTION The VGLR is a 15″ diameter Vandal Resistant Garage Light or Canopy Light in a round shape for up to LED 189W lamps, HID 150W lamps, Fluorescent quad tube 2 x 42W lamps or Induction 80W lamps. Its rugged die cast aluminum housing and tough polycarbonate lens make it ideal for high abuse, vandalism prone areas. U.L. listed for wet locations.


CONSTRUCTION The housing is made of high pressure die cast aluminum and finished in a dark bronze polyester powder coat paint finish for lasting corrosion resistance. The reflector is made from die formed cold rolled steel with a high reflectance white polyester powder coat paint finish. Silicon rubber gasket for long life. The lens is made from tough injection molded polycarbonate for extra impact resistance and is UV stabilized. ½” threaded entry hubs with O-ring gaskets on the sides and back for conduit entry.

BALLAST / DRIVER High Power Factor, Constant Wattage Autotransformer ballasts. Multi Tap (120/208/240/277V) or 480V ballasts. Reactor 120V ballasts for HPS. Minimum starting temperature is -20°F (-30°C) for MP, -40°F (-40°C) for HPS. Universal Voltage (120-277V) electronic drivers for LED and induction.

LED DATA LED Watts

System Watts

Delivered Lumens

HID Equal

54 63 6,338 250W

95 117 9,305 350W

126 150 12,406 400W

189 206 18,610 750W


VGLR- MP 150- MT- L Product Series Lamp Type Lamp Wattage Voltage Lamp VGLR = Vandal Resistant Garage Light Round


(LED) 54, 95, 126, 189 (MP) 70, 100, 150 (HPS) 70, 100, 150 (FL) 226 = 2 x 26W 232 = 2 x 32W 242 = 2 x 42W (ID) 40, 80

MT = Multi Tap 120/208/240/277V UV = Universal Voltage (120–277 V) DT = Dual Tap120/277V 120V = 120V 480V = 480V

L = Lamp Included



Lumenform VSMW - Vandal Resistant Surface Mount Wallpack Metal Halide Pulse Start 70 – 150 W


Induction 40 W

DESCRIPTION The VSMW is a 12″ x 12″ Vandal Resistant Surface Mounting Wallpack fixture for up to HID 150W lamps, Fluorescent quad tube 2 x 42W lamps or Induction 40W lamps. Its rugged die cast aluminum housing and tough polycarbonate lens make it ideal for high abuse, vandalism prone areas. U.L. listed for wet locations.

APPLICATION Ideal for security lighting around commercial, industrial and residential buildings where mounting heights are lower and vandal resistance is desired.

HOUSING The housing and front cover is made of high pressure die cast aluminum and finished in a dark bronze polyester powder coat paint finish for lasting corrosion resistance.

BALLAST High Power Factor, Constant Wattage Autotransformer ballasts, Multi Tap (120/208/240/277V) or reactor 120V ballasts for HPS. Minimum starting temperature is -20°F (-30°C) for MP, -40°F (-40°C) for HPS. Electronic ballasts for Fluorescent 2x26, 32 or 42W in Dual Tap (120/277V).

SOCKET Medium base, 4KV pulse rated porcelain socket for HID lamps. Positive latching thermoplastic socket for fluorescent lamps.

REFLECTOR Die formed cold rolled steel with a high reflectance white polyester powder coat paint finish.


LENS Tough injection molded polycarbonate for extra impact resistance. UV stabilized.


VSMW- MP 150- MT- L Product Series Lamp Type Lamp Wattage Voltage Lamp VSMW = Vandal Resistant Surface Mount Medium Wallpack

MP = Metal Halide Pulse Start HP = High Pressure Sodium FL = Fluorescent quad tube ID = Induction

(MP) 70, 100, 150 (HPS) 70, 100, 150 (FL) 226 = 2 x 26W 232 = 2 x 32W 242 = 2 x 42W (ID) 40


L = Lamp Included

OPTIONS PC-XXX – Button Photocell (XXX = specify voltage).

9"

(229 mm)

12 3/8"

(314 mm)

Square



Lumenform HBCL – High Bay COB LED

LED 150, 200 W

150W 200W

DESCRIPTION The HBCL is a High Bay specially designed for COB (Chip On Board) style LED’s. It has an 18″ prismatic acrylic refractor which provides high levels of vertical illumination. Integral cooling fins help maintain low junction temperatures on the LED’s for long life. The HBCL is a great energy saving alternative to traditional HID high bay fixtures. U.L. listed.

APPLICATION Suitable for use in factories, warehouses, supermarkets, big box stores, auto showrooms and other areas that have mounting heights of 20′ (6 m) or more. Suitable as an energy saving alternative for replacing 400 – 750 W Metal Halide Pulse Start high bays.

DRIVER HOUSING

The housing is made of die cast aluminum and finished in a silver polyester powder coat paint finish for the top section and black for the heatsink.

DRIVER Electronic LED driver available in universal voltage 120-277V input, 50/60 Hz. Operating temperature range is -4°F (-20°C) to 122°F (50°C).

REFRACTOR

18″ prismatic acrylic to help maximize vertical illumination.


Delivered Lumens

HID Equal

150 13,506 400W

200 18,457 750W



HBCL- LD 150- UV- AC18 Product Series Lamp Type Lamp Wattage Voltage Refractor HBL = High Bay COB LED

LD = LED (LED) 150, 200 UV = Universal Voltage 120 – 277 V

AC18 = Acrylic 18″



Lumenform HBDD – High Bay Dual Disk

LED 169, 273 W

HBDD-FG16 Flat Glass 16″

HBDD-DA22 Drop Acrylic 22″

16″ Version With 4″ Stem

22″ Version With 8″ or 12″ Stem

DESCRIPTION The HBDD is a versatile industrial lighting unit which can be used as either a High Bay fixture when mounting heights are over 20′ or as a Low Bay fixture when mounting heights are under 20′. The unique two piece housing system separates the heat sensitive electronic driver section from the heat producing LED section to help maximize light output and LED life. Available in 169W version with comparable performance to HID 400+W and 273W version with comparable performance to HID 1000W.

APPLICATION Suitable for use in factories, warehouses, supermarkets, big box stores, auto showrooms and other large open indoor areas. Suitable as an energy saving alternative for replacing 400 – 1000 W HID high/low bays.

CONSTRUCTION

The housing is made of die cast aluminum and finished in a white polyester powder coat paint finish. External heat sinks for cooler operation. The 16″ version comes with a 4″ stem and the 22″ version comes with both an 8″ and a 12″ stem. Stem length can be increased to 30′ to allow the driver section to be remote mounted from the optical section. Can be either pendant mounted or mounted with the included hook with safety screw.

DRIVER Electronic LED driver available in universal voltage 120-277V input, 50/60 Hz.

LENSES

169W version offered with 16″ Flat Glass, Conical Acrylic or Drop Acrylic lenses. 273W version offered with 22″ Flat Glass, Conical Acrylic or Drop Acrylic lenses.

LED DATA LED

Watts System Watts

Lens Delivered Lumens

169 179 FG16 16,405

169 179 CA16 16,977

169 179 DA16 15,402

273 291 FG22 27,382

273 291 CA22 27,542

273 291 DA22 26,578

169W comparable to HID 400+W 273W comparable to HID 1000W CRI = 82 Color Temperature = 5000 K Input Voltage = 120-277V, 50/60 Hz


HBDD- LD 169- UV- FG16 Product Series Lamp Type Lamp Wattage Voltage Refractor HBDD = High Bay Dual Disk

LD = LED (LED) 169 (LED) 273


FG16 = Flat Glass 16″ CA16 = Conical Acrylic 16″ DA16 = Drop Acrylic 16″ FG22 = Flat Glass 22″ CA22 = Conical Acrylic 22″ DA22 = Drop Acrylic 22″

OPTIONS 3CP-XXX – 3 foot Cord and NEMA Plug, XXX = specify voltage, 120 or 277V F1-XXX or F2-XXX – Single or Double Fuse. XXX = specify voltage.



Lumenform HB - High Bay Aluminum Reflector


Induction 80 W

DESCRIPTION The HB is a versatile High Bay fixture for general purpose industrial lighting needs. U.L. damp location listed.

APPLICATION Suitable for use in factories, warehouses and other areas that have mounting heights of 20′ (6 m) or more.

HOUSING The housing is made of high pressure die cast aluminum and finished in a white polyester powder coat paint finish for lasting corrosion resistance.

BALLAST High Power Factor, Constant Wattage Autotransformer ballasts. Multi Tap (120/208/240/277V) or 480V ballasts. Minimum starting temperature is -20°F (-30°C) for MP, -40°F (-40°C) for HPS.

SOCKET Mogul base, 4KV pulse rated porcelain socket.

MOUNTING Junction box and hook with safety screw included. ¾″ threaded opening on the top of the junction box for pendant mounting.

REFLECTOR 16″ or 22″ anodized aluminum. Adjustable positions for choice of distribution patterns.


HB- MP 400- MT- AL16- L Product Series Lamp Type Lamp Wattage Voltage Reflector Lamp HB = High Bay MP = Metal Halide

Pulse Start HP = High Pressure Sodium ID = Induction

(MP) 200, 250, 320, 350, 400 (HPS) 150, 250, 400 (ID) 80

MT = Multi Tap (120/208/240/277V) 480V = 480V

AL16 = Aluminum 16″ AL22 = Aluminum 22″

L = Lamp Included

OPTIONS Q – Quartz restrike system with quartz restrike lamp QT – Quartz restrike system with time delay, with quartz restrike lamp. 3CP-XXX – 3 foot Cord and NEMA Plug, XXX = specify voltage, 120 or 277V WG16 or WG22 – Wire Guard 16″ or 22″ FG16 or FG22 – Flat Glass 16″ or 22″ with clamp band for mounting. Tempered glass. F1-XXX or F2-XXX – Single or Double Fuse. XXX = specify voltage. SC3 – Safety Cable 3′.



Lumenform HB - High Bay Acrylic Refractor



DESCRIPTION The HB with an Acrylic Refractor is a photometrically superior High Bay for commercial and industrial areas requiring high levels of vertical illumination. U.L. damp location listed.

APPLICATION Ideal for supermarkets, warehouse stores, auto showrooms and any retail outlet with mounting heights of 20′ (6 m) or more.





REFRACTOR 16″ or 22″ prismatic acrylic. Adjustable positions for choice of distribution patterns.


HB- MP 400- MT- AC16- L Product Series Lamp Type Lamp Wattage Voltage Refractor Lamp HB = High Bay MP = Metal Halide

Pulse Start HP = High Pressure Sodium ID = Induction

(MP) 200, 250, 320, 350, 400 (HPS) 150, 250, 400 (ID) 80. 120

MT = Multi Tap (120/208/240/277V) 120V = 120V 277V = 277V 480V = 480V

AC16 = Acrylic 16″ AC22 = Acrylic 22″

L = Lamp Included

OPTIONS Q – Quartz restrike system with quartz restrike lamp QT – Quartz restrike system with time delay, with quartz restrike lamp. 3CP-XXX – 3 foot Cord and NEMA Plug, XXX = specify voltage, 120 or 277V WG16 or WG22 – Wire Guard 16″ or 22″ FG16 or FG22 – Flat Glass 16″ or 22″ with clamp band for mounting. Tempered glass. F1-XXX or F2-XXX – Single or Double Fuse. XXX = specify voltage. SC3 – Safety Cable 3′.



Lumenform HBT - High Bay Thousand Watt

Metal Halide Pulse Start 750 - 1000 W Metal Halide 1000 W

High Pressure Sodium 1000 W Induction 80 W

DESCRIPTION The HBT is a versatile High Bay fixture for general purpose industrial lighting needs in up to 1000W applications. U.L. damp location listed.

APPLICATION Suitable for use in factories, warehouses and other areas that have high mounting heights and require large amounts of light.


BALLAST High Power Factor, Constant Wattage Autotransformer ballasts. Multi Tap (120/208/240/277V) or 480V ballasts. Minimum starting temperature is -20°F (-30°C) for MP and MH, -40°F (-40°C) for HPS.


MOUNTING Hook with safety screw included.

REFLECTOR / REFRACTOR

22″ anodized aluminum (shown) or 22″ prismatic acrylic. Adjustable positions for choice of distribution patterns.


HBT- MH 1000- MT- AL22- L Product Series Lamp Type Lamp Wattage Voltage Reflector Lamp HBT = High Bay Thousand Watt

MP = Metal Halide Pulse Start MH = Metal Halide HP = High Pressure Sodium ID = Induction

(MP) 750, 875, 1000 (MH) 1000 (HPS) 1000 (ID) 200

MT = Multi Tap 120/208/240/277V 480V = 480V

AL22 = Aluminum 22″ AC22 = Acrylic 22″

L = Lamp Included

OPTIONS Q – Quartz restrike system with quartz restrike lamp QT – Quartz restrike system with time delay, with quartz restrike lamp. 3CP-XXX – 3 foot Cord and NEMA Plug, XXX = specify voltage, 120 or 277V WG22 – Wire Guard 22″ FG22 – Flat Glass 22″ with clamp band for mounting. Tempered glass. F1-XXX or F2-XXX – Single or Double Fuse. XXX = specify voltage. SC3 – Safety Cable 3′.



Lumenform LB - Low Bay


DESCRIPTION

The LB is a versatile Low Bay fixture for general purpose industrial lighting needs where a combination of horizontal and vertical illumination is needed. U.L. damp location listed.

APPLICATION

Suitable for use in factories, assembly areas, warehouses and other areas which have mounting heights of less than 20′ (6 m).

HOUSING

The housing is made of high pressure die cast aluminum and finished in a white polyester powder coat paint finish for lasting corrosion resistance.

BALLAST

High Power Factor, Constant Wattage Autotransformer ballasts. Multi Tap (120/208/240/277V) or 480V ballasts. Minimum starting temperature is -20°F (-30°C) for MP, -40°F (-40°C) for HPS.

SOCKET


MOUNTING

Junction box and hook with safety screw included. ¾″ threaded opening on the top of the junction box for pendant mounting.

REFLECTOR/REFRACTOR 16″ or 22″ white polyester powder coat painted aluminum reflector with a 16″ or 22″ drop dish acrylic refractor.


LB- MP 400- MT- AA16- L Product Series Lamp Type Lamp Wattage Voltage Reflector/Refractor Lamp LB = Low Bay MP = Metal Halide

Pulse Start HP = High Pressure Sodium

(MP) 200, 250, 320, 350, 400 (HPS) 150, 250, 400

MT = Multi Tap (120/208/240/277V) 480V = 480V

AA16 = White painted Aluminum reflector with Acrylic drop Refractor 16″ AA22 = 22” version

L = Lamp Included

OPTIONS Q – Quartz restrike system with quartz restrike lamp QT – Quartz restrike system with time delay, with quartz restrike lamp. 3CP-XXX – 3 foot Cord and NEMA Plug, XXX = specify voltage, 120 or 277V F1-XXX or F2-XXX – Single or Double Fuse. XXX = specify voltage. SC3 – Safety Cable 3′.



Lumenform LB - Low Bay Acrylic


DESCRIPTION

The LB with fully acrylic optics is a specification grade product for commercial and industrial lighting where a greater amount of vertical surface illumination is needed. U.L. damp location listed.

APPLICATION

Suitable for use in commercial areas such as grocery stores and retail outlets where product is being merchandised. Can also be used in industrial areas where greater light levels on vertical surfaces is desired.

HOUSING

The housing is made of high pressure die cast aluminum and finished in a white polyester powder coat paint finish for lasting corrosion resistance.

BALLAST

High Power Factor, Constant Wattage Autotransformer ballasts. Multi Tap (120/208/240/277V) or 480V ballasts. Minimum starting temperature is -20°F (-30°C) for MP, -40°F (-40°C) for HPS.

SOCKET


MOUNTING

Junction box and hook with safety screw included. ¾″ threaded opening on the top of the junction box for pendant mounting.

REFRACTOR 16″ or 22″ acrylic refractor with an acrylic drop dish.


LB- MP 400- MT- ACDA22- L Product Series Lamp Type Lamp Wattage Voltage Refractor Lamp LB = Low Bay MP = Metal Halide


(MP) 200, 250, 320, 350, 400 (HPS) 150, 250, 400

MT = Multi Tap (120/208/240/277V) 480V = 480V

ACDA16 = Acrylic refractor with Drop Acrylic dish. ACDA22 = 22″ version (for 400 W)

L = Lamp Included

OPTIONS Q – Quartz restrike system with quartz restrike lamp QT – Quartz restrike system with time delay, with quartz restrike lamp. 3CP-XXX – 3 foot Cord and NEMA Plug, XXX = specify voltage, 120 or 277V F1-XXX or F2-XXX – Single or Double Fuse. XXX = specify voltage. SC3 – Safety Cable 3′.



Lumenform TL – Temporary Light


DESCRIPTION The TL is a rugged Temporary Light that comes complete in a unit pack. U.L. damp location listed.

APPLICATION Suitable for providing a large amount of light in construction areas. Can be used over and over again. Quick to install and take down with the included mounting hook.





WIRE GUARD Zinc plated steel wire guard with an open-close design for easy relamping. The wire guard protects the entire lamp including the bottom.


TL- MP 400- Product Series Lamp Type Lamp Wattage TL = Temporary Light MP = Metal Halide


(MP) 200, 250, 320, 350, 400 (HPS) 250, 400

OPTIONS 3C - 3′ Cord (blunt end) 3CSBP - 3′cord with straight blade plug. Wired to 120V. 3CP-120V - 3′ cord with NEMA twist lock plug. Wired to 120V.

26″

(660mm)



Lumenform ELP-FH – Emergency

Light Thermoplastic Housing

Fixed Heads

DESCRIPTION

The ELP-FH is an attractive, economical alternative to traditional double headed emergency lighting fixtures. It has an aesthetically appealing low profile and is quick and easy to install.

APPLICATION

Suitable for use in almost any commercial or light industrial application.

APPROVALS UL924. Life Safety NFPA 101. UL listed for damp locations use.

HOUSING

The housing is made of injection molded thermoplastic. It has high impact resistance and is UL94-5V rated.

MOUNTING

The back mounting plate is made of injection molded thermoplastic. It has a molded in universal J-Box mounting pattern and keyhole slots. The main housing snaps on to the back plate for quick and easy installation.

LENS Computer designed optical prisms throw the light outward and to the sides for maximum utilization.

ELECTRICAL/BATTERY

Dual voltage input 120/277 VAC, 60 Hz.

Maintenance free, Sealed Lead Calcium 6V, 4.0 AH battery with a maximum full recharge time of 24 hours. Minimum 1 ½ hour emergency operation.

Low voltage disconnect of the battery prevents deep discharge and maintains good battery life.

Fully automatic, solid state charger.

Test switch with LED charge indicator/AC voltage indicator.

Safety disconnect feature cuts power to the fixture when it is removed from the back mounting plate.

Line latching feature prevents the unit from turning on during installation to a non-energized AC circuit. Saves labor since the installer does not have to return to connect the battery terminals once the building is energized.

Catalog Number

Description Heads Lamp Type Lamp V DC

Lamp Watts

Weight (Lbs)

Volume (cu. ft.)

Pieces per Skid

ELP-FH White Housing Fixed Heads T-5 Incandescent 6 2 x 5.4 3.3 0.13 576

11 3/4" (301mm)

5 1

/8"

(70mm)

(129m

m)

2 3/4"



Lumenform ELP-SH – Emergency Light

Thermoplastic Housing Square Heads

DESCRIPTION

The ELP-SH is an attractive, emergency lighting unit with soft rounded corners and adjustable square heads.

APPLICATION


OPTIONS (add suffix) BLK – Black Housing.


HOUSING


MOUNTING

The back mounting plate is made of injection molded thermoplastic. It has a molded in universal J-Box mounting pattern and keyhole slots. The main housing snaps on to the back plate for quick and easy installation.

HEADS Two attractive square shaped heads with rounded corners are adjustable allowing the end user to direct the light where it will be most useful. Vacuum metalized reflectors increase light output from the heads.

ELECTRICAL/BATTERY






Safety disconnect feature cuts power to the fixture when it is removed from the back mounting plate.

Line Latching feature prevents the unit from turning on during installation to a non-energized AC circuit. Saves labor since the installer does not have to return to connect the battery terminals once the building is energized.

Catalog Number


Lamp Watts

Weight (Lbs)

Volume (cu. ft.)

Pieces per Skid

ELP-SH White Housing Square Heads T-5 Incandescent 6 2 x 5.4 3.7 0.17 324

ELP-SH-BLK Black Housing Square Heads T-5 Incandescent 6 2 x 5.4 3.7 0.17 324



Lumenform ELP-SHL – LED Emergency Light

Thermoplastic Housing Square Heads with LED’s

DESCRIPTION The ELP-SHL is an attractive, emergency lighting unit with soft rounded corners and adjustable square heads. It utilizes modern LED lamps which are long lasting, efficient and bright white.

APPLICATION Suitable for use in almost any commercial or light industrial application.

OPTIONS (add suffix) HL – High Lumen (50% greater light) BLK – Black Housing. SD – Self Diagnostics


HOUSING The housing is made of injection molded thermoplastic. It has high impact resistance and is UL94-5V rated. Available in white or black housing.

MOUNTING The back mounting plate is made of injection molded thermoplastic. It has a molded in universal J-Box mounting pattern and keyhole slots. The main housing snaps on to the back plate for quick and easy installation. Suitable for wall or ceiling mounting.

HEADS Two attractive square shaped heads with rounded corners are adjustable allowing the end user to direct the light where it will be most useful. High-performance chrome-plated metalized reflector and plastic lens for optimal light distribution.

LED’s Standard version is 8 LED x 0.125W each for a total of 1W per head. High Lumen version is 12 LED x 0.125W for a total of 1.5W per head allowing increased center to center spacing.

ELECTRICAL/BATTERY Dual voltage input 120/277 VAC, 60 Hz.

Maintenance free, Nickel Cadmium (NiCd) battery in 3.6 V with a maximum full recharge time of 24 hours. Minimum 1 ½ hour emergency operation.

Fully automatic, solid state two rate charger.


Catalog Number


Lamp Watts

Weight (Lbs)

Case Qty.

Case Weight (Lbs)

ELP-SHL White Housing Square Heads LED 3.6 2 x 1 W 1.7 12 22

ELP-SHL-BLK Black Housing Square Heads LED 3.6 2 x 1 W 1.7 12 22



Lumenform ELP-HWSH – Emergency Light

Thermoplastic Housing High Wattage

Square Heads ▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

DESCRIPTION

The ELP-HWSH extends the ELP-SH family look with an attractive high wattage emergency light featuring a thermoplastic housing, soft rounded corners and adjustable square heads. Available in 6 V and 12 V models and up to 54 W for powering remote heads.

APPLICATION

Suitable for use in commercial and industrial applications where higher light levels are required or remote head capability is desired.

ACCESSORIES

ERH36 – Emergency Remote Head PAR36 for indoor use. Available in 6V, 9W and 12V, 9W versions. ERHW36 – Emergency Remote Head Weatherproof PAR36 for outdoor use. Available in 6V and 12V version, 8W and 12W versions.


HOUSING


MOUNTING

The back mounting plate has a molded in universal J-Box mounting pattern and keyhole slots. Knockouts are available on the top, back and sides for easy wire entry.

HEADS Two attractive square shaped heads with rounded corners are adjustable allowing the end user to direct the light where it will be most useful. Vacuum metalized reflectors increase light output from the heads.

ELECTRICAL/BATTERY


Maintenance free, Sealed Lead Calcium batteries with a maximum full recharge time of 24 hours.


Brownout detection circuit will turn on emergency light during low voltage conditions.




Catalog Number

Lamp Type

Lamp Volts

Lamp Watts

Maximum Wattage

(for 90 min.)

Weight (Lbs)

Volume (cu. ft.)

Pieces Per Master Carton

Pieces Per Skid

ELP-HWSH-627 T-5 Incan. 6 2 x 9 27 W 7.3 0.53 4 140



14 3/4" (375mm)

7 1

/2"

(192m

m)

6 3/4"(170mm)



Lumenform ELP-HW – Emergency Light

Thermoplastic Housing High Wattage

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

DESCRIPTION

The ELP-HW is an attractive high wattage emergency light featuring a thermoplastic housing with soft rounded corners and PAR 36 heads. Available in 6 V and 12 V models and up to 54 W for powering remote heads.

APPLICATION

Suitable for use in commercial and industrial applications where higher light levels are required or remote head capability is desired.

ACCESSORIES

ERH36 – Emergency Remote Head PAR36 for indoor use. Available in 6V, 9W and 12V, 9W versions. ERHW36 – Emergency Remote Head Weatherproof PAR36 for outdoor use. Available in 6V and 12V version, 8W and 12W versions.


HOUSING


MOUNTING

The back mounting plate has a molded in universal J-Box mounting pattern and keyhole slots. Knockouts are available on the top, back and sides for easy wire entry.

HEADS The two PAR 36, 9 W incandescent lamp heads can be easily adjusted both vertically and horizontally. Knockouts available to move the heads to the side of the housing when mounting in height restricted areas such as over doorways.

ELECTRICAL/BATTERY


Maintenance free, Sealed Lead Calcium batteries with a maximum full recharge time of 24 hours.


Brownout detection circuit will turn on emergency light during low voltage conditions.




Catalog Number

Lamp Type

Lamp Volts

Lamp Watts

Maximum Wattage

(for 90 min.)

Weight (Lbs)

Volume (cu. ft.)

Pieces Per Master Carton

Pieces Per Skid

ELP-HW-627 T-5 Incan. 6 2 x 9 27 W 7.3 0.44 4 140

ELP-HW-654 T-5 Incan. 6 2 x 9 54 W 11.6 0.44 4 140

ELP-HW-1254 T-5 Incan. 12 2 x 9 54 W 11.6 0.44 4 140

11 5/8" (296mm)

4 1/4"

13 3

/8"

(340m

m)

(107mm)



Lumenform ERH36

Emergency Remote Head PAR36 for indoor use

ERHW36 Emergency Remote Head Weatherproof

PAR36 for outdoor use

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

ERH36 (indoor)

Emergency lighting Remote Head PAR 36 with 9 W lamp.

Polycarbonate housing, polycarbonate lens, vacuum metalized reflector.

Mounting Plate included.

Convertible to 2 heads per mounting plate.

Catalog Number

Description Color Lamp Type Lamp Volts

Lamp Watts

Number of Heads

ERH36-69 Indoor Remote Head White T-5 Incan. 6 9 1

ERH36-129 Indoor Remote Head White T-5 Incan. 12 9 1

ERHW36 (outdoor with sealbeam lamps)

Die cast aluminum mounting plate with gasket. Grey painted to match housing. Wire entry into swivel is silicon sealed (not visible in picture). O-ring gasket seals swivel to mounting plate. Fully adjustable head in both horizontal and vertical directions. Molded rubber gasket (not visible in picture) provides a positive seal against moisture. The use of a removable gasket allows a weatherproof seal to be maintained when lamps are replaced (unlike remote heads that use silicon sealant). Sealbeam PAR 36 lamps for superior optical performance. Available in 6 V and 12V versions. Available in 8 W and 12 W versions. Retaining ring keeps the lamp and gasket locked into the housing and provides a finished look.

Catalog Number

Description Color Lamp Type Lamp Volts

Lamp Watts

Number of Heads

Weight (Lbs)

Volume (cu. ft.)

Pieces Per

Master

ERHW36-68 Wet Location Head Grey Sealbeam 6 8 1 1.10 0.12 30






Lumenform EXP – EXIT Sign Plastic

Thermoplastic Housing Self Powered or AC Only

LED Lamps

DESCRIPTION

The EXP series is an economical and energy saving Exit sign. The injection molded plastic housing has soft rounded corners for aesthetic appeal. The LED lamps provide a maximum of energy savings potential and the battery pack allows the unit to be Self Powered during power outages. An AC only version is also available.

APPLICATION


OPTIONS (add suffix) BLK – Black Housing. SAL – SALIDA version for Latin American markets.

APPROVALS UL924. UL listed for damp locations use. Life Safety NFPA 101. HOUSING

The housing is made of injection molded thermoplastic making it impact resistant and corrosion proof. UL94-5V rated.

MOUNTING

Easy snap fit canopy can be used for top or end mounting or knockouts can be used for surface mounting. Included second face allows the unit to be used as a single or double face exit sign. Snap fitting, replaceable chevrons for direction indication.

LAMPS Long life Light Emitting Diode (LED) lamps provide the maximum in energy savings.

ELECTRICAL/BATTERY


Maintenance free, Sealed Nickel Cadmium battery provides a minimum 1 ½ hour emergency operation. (SP versions only).




Catalog Number

Housing Emergency Lamp Type Wording Input Power 120V

Input Power 277V

Weight (Lbs)

Volume (cu. ft.)

EXP-SP-LR Thermoplastic Self Powered LED - RED EXIT 3.0 W 3.0 W 3.3 0.24

EXP-SP-LG Thermoplastic Self Powered LED – GREEN EXIT 2.8 W 2.8 W 3.3 0.24

EXP-AC-LR Thermoplastic AC Only LED - RED EXIT 3.0 W 3.0 W 3.2 0.24

EXP-AC-LG Thermoplastic AC Only LED – GREEN EXIT 2.8 W 2.8 W 3.2 0.24



Lumenform EEC-LR-2T – Emergency Exit Combo

with 2 Top mounted heads Thermoplastic Housing

Self Powered LED Lamps

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

DESCRIPTION The EEC-LR-2T (LED Red) and EEC-LG-2T (LED Green) are economical and energy saving Exit signs with two, Top mounted heads. The Exit signs’ LED lamps provide a maximum of energy savings potential and the battery pack allows the unit to be self powered during power outages.

APPLICATION Suitable for use in almost any commercial or light industrial application.

OPTIONS (add suffix) BLK – Black Housing. SAL – SALIDA version for Latin American markets.

APPROVALS UL924. UL listed for damp locations use. Life Safety NFPA 101.

HOUSING The housing is made of injection molded thermoplastic making it impact resistant and corrosion proof. UL94-5V rated.

MOUNTING Easy snap fit canopy can be used for end mounting, or knockouts can be used for surface mounting. Included second face allows the unit to be used as a single or double face exit sign. Snap fitting, replaceable chevrons for direction indication.

LAMPS Long life Light Emitting Diode (LED) lamps in the Exit sign portion provide the maximum in energy savings. The emergency lighting heads have 2 x 5.4 W incandescent lamps.






Line latching feature prevents the unit from turning on during installation to a non-energized AC circuit. Saves labor since the installer does not have to return to connect the battery terminals after the building is energized.

Catalog Number

Emergency Lamp Type EXIT

Section

Lamp Type Emergency

Section

Wording Input Power 120V

Input Power 277V

Weight (Lbs)

Volume (cu. ft.)

EEC-LR-2T Self Powered LED Red 2 x 5.4 W Incan. EXIT 4.0 4.0 7.0 0.78

EEC-LG-2T Self Powered LED Green 2 x 5.4 W Incan. EXIT 4.0 4.0 7.0 0.78

EEC-LR-2T-SAL Self Powered LED Red 2 x 5.4 W Incan. SALIDA 4.0 4.0 7.0 0.78

EEC-LG-2T-SAL Self Powered LED Green 2 x 5.4 W Incan. SALIDA 4.0 4.0 7.0 0.78



Lumenform EEC-LR-2S – Emergency Exit Combo

with 2 Side mounted heads Thermoplastic Housing

Self Powered LED EXIT section, Incandescent Heads

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

DESCRIPTION The EEC-LR-2S (LED Red) and EEC-LG-2S (LED Green) are economical and energy saving Exit signs with two, Side mounted emergency lighting heads. The injection molded plastic housing has soft rounded corners for aesthetic appeal. The Exit signs’ LED lamps provide a maximum of energy savings potential and the battery pack allows the unit to be Self Powered during power outages.

APPLICATION Suitable for use in almost any commercial or light industrial application. Ideal for mounting in the limited space available above doorways.

OPTIONS BLK – Black Housing. SD – Self Diagnotics SAL – SALIDA version for Latin American markets.

APPROVALS UL924. UL listed for damp locations use. Life Safety NFPA 101. HOUSING The housing is made of injection molded thermoplastic making it impact resistant and corrosion proof. UL94-5V rated.

MOUNTING Easy snap fit canopy can be used for top mounting or knockouts can be used for surface mounting. Included second face allows the unit to be used as a single or double face exit sign. Snap fitting, replaceable chevrons for direction indication.

LAMPS Long life Light Emitting Diode (LED) lamps in the Exit sign portion provide the maximum in energy savings. The emergency lighting heads have 2 x 5.4 W incandescent lamps.







EEC- LR- 2S- __ Product Series Lamp Type Heads Options EEC = Emergency EXIT Combo

LR = LED Red, incandescent heads LG = LED Green, incandescent heads

2S = 2 Side mounted heads

(blank) = EXIT letters SAL = SALIDA letters BLK = Black housing SD = Self Diagnostics



Lumenform EEC-LR-2SL – Emergency Exit Combo

with 2 LED Side mounted heads Thermoplastic Housing

Self Powered LED EXIT section, LED Heads

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

DESCRIPTION The EEC-LR-2SL (LED Red) and EEC-LG-2SL (LED Green) are economical and energy saving Exit signs with two, Side mounted LED emergency lighting heads. The injection molded plastic housing has soft rounded corners for aesthetic appeal. Both the EXIT portion and the heads use LED lamps to provide a maximum of energy savings potential and the battery pack allows the unit to be Self Powered during power outages.

APPLICATION Suitable for use in almost any commercial or light industrial application. Ideal for mounting in the limited space available above doorways.

OPTIONS BLK – Black Housing. SD – Self Diagnotics RC – Remote Capable HL – High Lumen version uses 12 x 0.125W LED’s for greater center to center spacing.

APPROVALS UL924. UL listed for damp locations use. Life Safety NFPA 101. HOUSING The housing is made of injection molded thermoplastic making it impact resistant and corrosion proof. UL94-5V rated.

MOUNTING Easy snap fit canopy can be used for top mounting or knockouts can be used for surface mounting. Can also be pendant mounted from the top. Included second face allows the unit to be used as a single or double face exit sign. Snap fitting, replaceable chevrons for direction indication.

LAMPS Long life Light Emitting Diode (LED) lamps in the Exit sign portion provide the maximum in energy savings. Each emergency lighting heads use 8 LED’s of 0.125W for energy savings and long life.


Maintenance free, 9.6V NiCd battery

Fully automatic, solid state dual rate charger can fully charge the battery within 24 hours.

Minimum 1 ½ hour emergency operation.


EEC- LR- 2SL- __ Product Series Lamp Type Heads Options EEC = Emergency EXIT Combo

LR = LED Red letters LG = LED Green letters

2SL = 2 Side mounted LED heads

BLK = Black housing SD = Self Diagnostics RC = Remote Capable HL = High Lumen version


Documents

Making Light Work For You - Lumenform Sheets/lumenform_spec_sheets.pdfFluorescent Quad Tube 2 x 26 - 42 W 12" DESCRIPTION The WTZS is an architectural grade full cutoff wall pack for