Embed Size (px)
Citation preview
14
modric
The Modric range of door funiture was conceived in 1965 on the basis of a dimensionally and asethetically co-ordinated range of items to allow maximum interchangeability.
The principle of modular unsprung components was revolutionary and Modric soon became a design classic.
Through continuous development to the range, Modric today represents a timeless, clean-cut range of door funiture available in a number of metallic finishes. Products are hand finished to provide the very best quaility available. Modric is known for fine design and extraordinary durability.
SS PSSatin Stainless Steel (316). Polished Stainless Steel (316).
t: 800-739-0202 f: 800-813-2128 e : [email protected] www.modric.com
Finishes
GT BFSimulated Bronze.
MAModric Anodised Aluminium.PVD Gold on Polished Stainless Steel (316).
GT special order only , minimum quantities required for special order.
t: 800-739-0202 f: 800-813-2128 e : [email protected] www.modric.com
3502
3502D
3503Modric lever handles on concealed Quadaxial fixing roses.Finishes: SS • PS • GT • BF • MA
As above but with extra projection from the door.Finishes: SS • PS • GT • BF • MA
Modric lever handles on concealed Quadaxial fixing roses.Finishes: SS • PS • GT • BF • MA
127
19
52
3
50
127
19
52
3
50
140
50
65
3
19
48
125
19
52
3
50
125
19
52
3
50
The unique feature of Allgood lever handles is the Quadaxial rose assembly. This provides a corrosion resistant, maintenance free solution.All Modric lever sets have independent test evidence to BS EN 1906, classification .4 7 – 1 1 4 0 U
t: 800-739-0202 f: 800-813-2128 e : [email protected] www.modric.com
3504 3506 3512Modric lever handles on concealed Quadaxial fixing roses. Finishes: SS • PS • GT • BF • MA
Modric lever handles on concealed Quadaxial fixing roses. Finishes: SS • PS • GT • BF • MA
Modric lever handles on concealed Quadaxial fixing roses. Finishes: SS • PS • GT • BF • MA
Lever handles
60
137
11
22
50
3
133
22
55
3
50
133
22
55
3
50
54
22
22
136
50
3
54
22
22
136
50
3
t: 800-739-0202 f: 800-813-2128 e : [email protected] www.modric.com
3515 3520Modric lever handles on concealed Quadaxial fixing roses. Finishes: SS • PS • GT • BF • MA
Modric lever handles on concealed Quadaxial fixing roses.Finishes: SS • PS • GT • BF
24
115
58
3
50
48
3
12
2250
135
12.5
25
48
3
12
2250
135
12.5
25
The unique feature of Allgood lever handles is the Quadaxial rose assembly. This provides a corrosion resistant, maintenance free solution.All Modric lever sets have independent test evidence to BS EN 1906, classification .4 7 – 1 1 4 0 U
t: 800-739-0202 f: 800-813-2128 e : [email protected] www.modric.com
35403530Modric lever handles on concealed Quadaxial fixing roses.Finishes: SS • PS • GT • BF
Modric lever handles on concealed Quadaxial fixing roses.Finishes: SS • PS • GT • BF
Lever handles
45
3
25
1850
1351045
3
25
1850
13510
50
3
28
1950
137
16
28
16
28
50
3
28
1950
137
16
28
16
28
t: 800-739-0202 f: 800-813-2128 e : [email protected] www.modric.com
3560Modric lever handles on concealed Quadaxial fixing roses.Finishes: SS • PS • GT • BF
57
3
20
2050
146
57
3
20
2050
146
3550Modric lever handles on concealed Quadaxial fixing roses.Finishes: SS • PS • GT • BF
57
3
20
2050
146
57
3
20
2050
146
The unique feature of Allgood lever handles is the Quadaxial rose assembly. This provides a corrosion resistant, maintenance free solution.All Modric lever sets have independent test evidence to BS EN 1906, classification .4 7 – 1 1 4 0 U
t: 800-739-0202 f: 800-813-2128 e : [email protected] www.modric.com
Lever handles
3570Modric lever handles on concealed Quadaxial fixing roses.Finishes: SS • PS • GT • BF
59
3
20
20
50
130
59
3
20
20
50
130
t: 800-739-0202 f: 800-813-2128 e : [email protected] www.modric.com
Other lengths available to special order. Please note, the maximum recommended fixing centres for handles utilising two fixings is 1200mm. Please contact Allgood for specification advice.
6594 6594CModric pull handle with bolt through fixings. 400mm centres.
Finishes: SS • PS • GT • BF • MA
Modric cranked pull handle with bolt through fixings. 400mm centres.
Finishes: SS • PS • GT • BF • MA
6594BBPair, as above, with back-to-back fixings.
6594CBBPair, as above, with back-to-back fixings.
6597 6597CModric pull handle as per 6594 but with 600mm centres.
Modric cranked pull handle as per 6594C but with 600mm centres.
6597BBPair, as above, with back-to-back fixings.
6597CBBPair, as above, with back-to-back fixings.
419/619
19 70
400/600
90
400/600419/619
63
19
t: 800-739-0202 f: 800-813-2128 e : [email protected] www.modric.com
59
500/750 400/600
25
12.5
6584L/RModric pull handle with bolt through fixings. 380mm centres (diagonal). STATE HAND. Right hand shown.
Finishes: SS • PS • GT • BF • MA
Modric pull handle as per 6584L/R but with 579mm centres (diagonal). STATE HAND. Right hand shown.
6588L/R
Pair, as above, with back-to-back fixings.6584BBL/R
Pair, as above, with back-to-back fixings.6588BBL/R
Pull handles
1720Modric pull handle with bolt through fixings. 400mm centres.
Finishes: SS • PS • GT • BF
1720BBPair, as above, with back-to-back fixings.
1721Modric pull handle as per 1720 but with 600mm centres.
1721BBPair, as above, with back-to-back fixings.
1730Modric pull handle with bolt through fixings. 400mm centres.
Finishes: SS • PS • GT • BF
1730BBPair, as above, with back-to-back fixings
1731Modric pull handle as per 1730 but with 600mm centres.
1731BBPair, as above, with back-to-back fixings
500/750 400/600
28 61
16
3860
5722
400/600
t: 800-739-0202 f: 800-813-2128 e : [email protected] www.modric.com
1740Modric pull handle with bolt through fixings. 400mm centres.
Finishes: SS • PS • GT • BF
1740BBPair, as above, with back-to-back fixings
1741Modric pull handle as per 1740 but with 600mm centres.
1741BBPair, as above, with back-to-back fixings
55
500/700 400/600
25
10
Other lengths available to special order. Please note, the maximum recommended fixing centres for handles utilising two fixings is 1200mm. Please contact Allgood for specification advice.
1750Modric pull handle with bolt through fixings. 400mm centres.
Finishes: SS • PS • GT • BF
1750BBPair, as above, with back-to-back fixings
1751Modric pull handle as per 1750 but with 600mm centres.
1751BBPair, as above, with back-to-back fixings
63
500/700 400/600
19
t: 800-739-0202 f: 800-813-2128 e : [email protected] www.modric.com
67
500/700 400/600
19
Pull handles and push plates
1760Modric pull handle with bolt through fixings. 400mm centres.
Finishes: SS • PS • GT • BF
1761Modric pull handle as per 1760 but with 600mm centres.
1760BBPair, as above, with back-to-back fixings
1761BBPair, as above, with back-to-back fixings
1770Modric pull handle with bolt through fixings. 400mm centres.
Finishes: SS • PS • GT • BF
1771Modric pull handle as per 1770 but with 600mm centres.
1770BBPair, as above, with back-to-back fixings
1771BBPair, as above, with back-to-back fixings
19
400/600419/619
65
6801GModric push plate. 450x76x1.5mm.
Finishes: SS • PS • GT • BF • MA
6801JModric push plate. 630x76x1.5mm.
Finishes: SS • PS • GT • BF • MA
761.5
450/630
t: 800-739-0202 f: 800-813-2128 e : [email protected] www.modric.com
62606250Flush pull handle. Tested to BS EN 1634 for 30 and 60 minutes. Finishes: SS • PS • MA
Flush pull handle. Tested to BS EN 1634 for 30 and 60 minutes. Finishes: SS • PS • MA
6250FPIntumescent pack for 6260 flush pull handles.Finish: XX
152
223
25
76
152
223
152
6215Modric flush pull handle.Finishes: SS • PS • GT • BT • MA
t: 800-739-0202 f: 800-813-2128 e : [email protected] www.modric.com
1714/10Ledge pull. Finishes: SS (XX1714/1S) PS (XX1714/1P)
30
45
100
2.5
1714/20Ledge pull. Finishes: SS (XX1714/2S) PS (XX1714/2P)
30
45
200
2.5
1716/20As above but with 70mm projection. Finishes: SS (XX1716/2S) PS (XX1716/2P)
Flush pulls and ledge pulls
1716/10As above but with 70mm projection. Finishes: SS (XX1716/1S) PS (XX1716/1P)
76
1170
624576x76x11mm Flush ring handle, with 8mmspindle.Finishes: SC • PC • PB • PZ
1714/10
1716/20
t: 800-739-0202 f: 800-813-2128 e : [email protected] www.modric.com
33
2301
2304
Door stop.
Finishes: SS • PS • GT • BF • MA
Magnetic door holder.
Finishes: SS • PS • GT • BF • MA
Coat hooks and door stops
2307Door stopFinishes: SS • PS • GT • BF • MA
102
25
35
38
47
10
35
10
50
27.5
15
2308Door bumper.
Finishes: SS • PS • GT • BF • MA
3247
26
2302 21705Door stop.Finishes: SS • PS • GT • BT
Door stop.Finishes: SS • PS • GT • BT
22
32
32
2305Door stop.Finishes: SS • PS • GT • BT
1619
63
Door stops
t: 800-739-0202 f: 800-813-2128 [email protected] www.modric.com
15
2 .
Finishes Lever handlesPull handlesPush plates
16-1718-2324-27
27
modric Inc,National Headquarters,P.O.Box 1639ArbolesColorado 81121
t. 800-739-0202f. 800-813-2128e. [email protected]
modric
