Upload
vuongphuc
View
214
Download
0
Embed Size (px)
Citation preview
PRODUCT INFORMATION
LYON MODULAR DRAWERS
2946 Larimer St. Denver, CO 80205 303-295-1100 / 800-373-7693 FAX 303-295-2464 Email [email protected]
www.snyderequipment.com
Mod
ular
Dra
wer
Cab
inet
sM
odul
ar D
raw
er C
abin
ets
83Designed and built todeliver payloads of 400lbs.* per drawer, eachPlatinum 250/251 Seriescabinet is engineered toprovide years of reliableperformance—backed bythe Lyon Lifetime ProductWarranty.
Six basic cabinet heightsand fifteen different drawerheights accommodateendless varieties of
products as small as marbles or as ponderous as
bowling balls, while six standard colors offer thepotential for as many as thirty-six combinations ofcolors for cabinets and drawers.
Drawer Layout Kits and Accessories, Extra-Wideand Double-Wide cabinets, Modular DrawerWorkstations, Modular Drawer Shelving, ShelfCabinets and Drawer/Door Cabinets complement thesix basic Platinum Series cabinet selections toprovide added versatility and maximize utilization ofmodular drawer installations within your facilities.
Pre-engineered selections of Platinum Seriesmodular drawer cabinets include six of the mostpopular cabinets with partition and divider kitsinstalled—in stock for immediate shipment!
Platinum 250/251 Series Cabinets
46
Eye-LevelNo. 250-680 — Single Drawer Access
No. 251-680 — Multiple Drawer Access591⁄4" H
Table-HighNo. 250-310 — Single Drawer Access
No. 251-310 — Multiple Drawer Access301⁄8" H
Desk-HighNo. 250-270 — Single Drawer Access
No. 251-270 — Multiple Drawer Access267⁄8" H
Bench-HeightNo. 250-350 — Single Drawer Access
No. 251-350 — Multiple Drawer Access331⁄4" H
Mid-Range HeightNo. 250-400 — Single Drawer Access
No. 251-400 — Multiple Drawer Access373⁄16" H
*with 2 partitions per drawer
Counter-HighNo. 250-490 — Single Drawer Access
No. 251-490 — Multiple Drawer Access441⁄4" H
Eighty-three pre-engineered modular drawer cabinets are now available to satisfy almost anyrequirement for high density storage and retrieval of parts, tools, supplies, instruments andequipment in commercial, industrial and institutional facilities.
RemovableBase Closure
Panels Wider Base Openingfor Forklift Access
Single Drawer Access250 Cabinet SeriesOur Safetylink system is included onall Lyon modular drawer cabinetscarrying the 250 series prefix in thecatalog number. Safetylinkautomatically locks unopeneddrawers in place when one drawer ispulled out — preventing accidentaltipping and potential for injury. 250Series cabinets also include standardlock that secures entire cabinet.
Multiple Drawer Access251 Cabinet SeriesCustomers who want access tomultiple drawers in the same cabinetsimultaneously should order catalognumbers with the 251 Seriesdesignation. See page 61 underLocking Systems. Cabinets includestandard lock and anchoring kit.
Important: We strongly recommend cabinets without Safetylink be properly anchored to prevent tipping.
250SERIES
251SERIES
Mod
ular
Dra
wer
Cab
inet
sM
odul
ar D
raw
er C
abin
ets
15Maximize Storage Flexibility!
Fifteen Different Drawer Heights
Small Drawers
Medium Size
Drawers
Large and
ExtraLarge
Drawer Sizes
DrawerFront
Height
UseableDrawerHeight
StandardWidth
(30"w)
MediumWidth
(36"w)
Slender-line
(23"w)
ExtraWide
(45"w)
Inside Drawer Dimensions23"w Cabinets 1715⁄16"w x 251⁄8"d30"w Cabinets 251⁄8"w x 251⁄8"d36"w Cabinets 311⁄2"w x 251⁄8"d45"w Cabinets 391⁄2"w x 251⁄8"d60"w Cabinets 5411⁄16"w x 251⁄8"d
Modular Drawer Storage Systems
DoubleWide
(60"w)
47
31⁄16" 2 1⁄4" 25✖*-40SL 25✖*-40 25✖*-40M 25✖*-40X 25✖*-40XL37⁄8" 3" 25✖*-50SL 25✖*-50 25✖*-50M 25✖*-50X 25✖*-50XL
45⁄8" 3 7⁄8" 25✖*-60SL 25✖*-60 25✖*-60M 25✖*-60X 25✖*-60XL
57⁄16" 4 5⁄8" 25✖*-70SL 25✖*-70 25✖*-70M 25✖*-70X 25✖*-70XL
63⁄16" 5 3⁄8" 25✖*-80SL 25✖*-80 25✖*-80M 25✖*-80X 25✖*-80XL
7" 61⁄4" 25✖*-90SL 25✖*-90 25✖*-90M 25✖*-90X 25✖*-90XL
73⁄4" 7" 25✖*-100SL 25✖*-100 25✖*-100M 25✖*-100X 25✖*-100XL
89⁄16" 7 3⁄4" 25✖*-110SL 25✖*-110 25✖*-110M 25✖*-110X 25✖*-110XL
93⁄8" 8 1⁄2" 25✖*-120SL 25✖*-120 25✖*-120M 25✖*-120X 25✖*-120XL
101⁄8" 9 3⁄8" 25✖*-130SL 25✖*-130 25✖*-130M 25✖*-130X 25✖*-130XL
107⁄8" 101⁄8" 25✖*-140SL 25✖*-140 25✖*-140M 25✖*-140X 25✖*-140XL
113⁄4" 107⁄8" 25✖*-150SL 25✖*-150 25✖*-150M 25✖*-150X 25✖*-150XL
121⁄2" 113⁄4" 25✖*-160SL 25✖*-160 25✖*-160M 25✖*-160X 25✖*-160XL
135⁄16" 121⁄2" 25✖*-170SL 25✖*-170 25✖*-170M 25✖*-170X 25✖*-170XL
141⁄16" 131⁄4" 25✖*-180SL 25✖*-180 25✖*-180M 25✖*-180X 25✖*-180XL
*IMPORTANT: You must specify: A. Single drawer access (unopened drawers are locked in place when one drawer is pulled out) by replacing the ✖ with a 0 (250); or B. Multiple drawer access (multiple drawers in the same cabinet may be opened simultaneously) by replacing the ✖ with a 1 (251).
Hardware/Fasteners
General Maintenance Products
Electrical/Electronic Parts
Plumbing Parts
Medical Supplies
Each cabinet drawer suspension has six heavyduty precision ball bearing rollers, two ball bear-ing floating rollers and two floating nylon rollers.
Lyon Platinum 250/251 SeriesModular Drawer Cabinets arewarranted against defects inmaterials and workmanshipfor five years when used in
accordance with the manufacturer’sspecifications and operating instructions.
Five-year warranty is based on single shiftapplications.
For multiple shift applications the warranty is:three years for two shifts — one year for threeshift applications.
Mod
ular
Dra
wer
Cab
inet
sM
odul
ar D
raw
er C
abin
ets
QUICK
SHIP7 WORKING DAYS
8
8
8
8
8
8 8 8
8
8
8
8
8
8 8 8
8
8
8
8
8
8 8 8
8
8
8
8
11 1110
8
8
8
8
11 1110
8
8
8
8
11 1110
10 12
11
10
11
10 16 16
8
8
8
8
16 16
8
8
8
8
8 8
5
5
5
5
6
6
8 8
16 16
16
16
6 6 6 6 8
7
7
6
6
6
4 4 4 4 4 4 4 4
8
8
8
8
6 66
6
5 5 5 5
555
5
Eye-Level (591/4"H) Modular Drawer Cabinets
Counter-High (441/4"H) Modular Drawer Cabinets
Our most popularcabinets fulfill 95% ofhigh density storagerequirements for typicalapplications. Eachdrawing represents thespecific cabinet withdrawers designated bynumbers at left andlayout kits designated bynumbers at right on eachillustration.
To determine yourselection(s) compareeach configuration to thesizes and quantities ofitems you will storeaccording to the colorcoding of each drawing.
Note: Each cabinet draw-er suspension has sixheavy duty precision ballbearing rollers, two ballbearing floating rollersand two floating nylonrollers.
17 drawers, 591 compartmentsNo. 250-680A-3 Single Drawer AccessNo. 251-680A-3 Multiple Drawer Access
7 drawers, 77 compartmentsNo. 250-680G-3 Single Drawer AccessNo. 251-680G-3 Multiple Drawer Access
9 drawers, 180 compartmentsNo. 250-490B-3 Single Drawer AccessNo. 251-490B-3 Multiple Drawer Access
(AA) 64 Plastic Bins3"w x 3"d and partition
(BB) 32 Plastic Bins3"w x 6"d x 2"h andpartition
(H) 36 compartments31⁄2"w x 31⁄2"d to 41⁄4"w x 41⁄4"d
(P) 16 compartments57⁄8"w x 57⁄8"d
(P) 16 compartments57⁄8"w x 57⁄8"d
(P) 16 compartments57⁄8"w x 57⁄8"d
(L) 12 compartments81⁄4"w x 57⁄8"d & 71⁄2"w x 57⁄8"d
(L) 12 compartments81⁄4"w x 57⁄8"d & 71⁄2"w x 57⁄8"d
(L) 12 compartments81⁄4"w x 57⁄8"d & 71⁄2"w x 57⁄8"d
(G) 25 compartments41⁄4"w x 41⁄4"d to 57⁄8"w x 51⁄8"d
(C) 9 compartments71⁄2"w x 71⁄2"d to 91⁄8"w x 81⁄4"d
(D) 8 compartments121⁄4"w x 57⁄8"d
(D) 8 compartments121⁄4"w x 57⁄8"d
(B) 4 compartments121⁄4"w x 121⁄4"d
Choose From Thirty-SixStandard ColorCombinations
(J) 32 compartments23⁄4"w x 57⁄8"d
(E) 24 compartments57⁄8"w x 31⁄2"d & 57⁄8"w x 41⁄4"d
Cabinets with or without Layout Kits Installed
HOW TO ORDER250 Series—Single
Drawer AccessCatalog numbers with the
250 series prefix (250-680A-3) have
Safetylink.
251 Series—MultipleDrawer Access
Catalog numbers with the251 series prefix
(251-680A-3) do not haveSafetylink.
(If you are unsure which lockingsystem you need, see page 61.)
Catalog numbers shownindicate cabinets with lay-out kits installed. To ordercabinets with layout kitsuninstalled, add the suffix -1to the catalog number (250-680A-1 or 251-680A-1)
To custom design modulardrawer cabinets see Steps 1 through 5on pages 59-61
48
Mod
ular
Dra
wer
Cab
inet
sM
odul
ar D
raw
er C
abin
ets
Drawer Height Layout Kit
SMALL
MEDIUM
LARGE
SMALL
MEDIUM
LARGE
8
8
8
8
8
8 8 8
8
8
8
8
11 1110
8
8
8
8
11 1110
10 12
11
10
11
10
16 16
8
8
8
8
4 4 4 4 4 4 4 4
6
6
5
55
5
7 106
6
7 8
555
5
8 8
5
5
5
5
6
6
8 8
8
8
8
8
8
8 8 8
8
8
8
8
8
8 8 8
8
8
8
8
11 1110
4 4 4 4 4 4 4 4
6
6
5
55
5
8 8
5
5
5
5
6
6
8 8
8 8
5
5
5
5
6
6
8 8
6 6 6 6 8
7
7
6
6
6
4 4 4 4 4 4 4 4
8
8
8
8
4 4 4 4 4 4 4 4
8
8
8
8
6 66
6
5 5 5 5
555
5
11 drawers, 269 compartmentsNo. 250-680F-3 Single Drawer AccessNo. 251-680F-3 Multiple Drawer Access
7 drawers, 137 compartmentsNo. 250-490D-3 Single Drawer AccessNo. 251-490D-3 Multiple Drawer Access
10 drawers, 180 compartmentsNo. 250-680C-3 Single Drawer AccessNo. 251-680C-3 Multiple Drawer Access
(BB) 32 Plastic Bins3"w x 6"d x 2"h andpartition
(H) 36 compartments31⁄2"w x 31⁄2"d to 41⁄4"w x 41⁄4"d
(P) 16 compartments57⁄8"w x 57⁄8"d
(P) 16 compartments57⁄8"w x 57⁄8"d
(L) 12 compartments81⁄4"w x 57⁄8"d & 71⁄2"w x 57⁄8"d
(L) 12 compartments81⁄4"w x 57⁄8"d & 71⁄2"w x 57⁄8"d
(L) 12 compartments81⁄4"w x 57⁄8"d & 71⁄2"w x 57⁄8"d
(G) 25 compartments41⁄4"w x 41⁄4"d to 57⁄8"w x 51⁄8"d
(C) 9 compartments71⁄2"w x 71⁄2"d to 91⁄8"w x 81⁄4"d
(D) 8 compartments121⁄4"w x 57⁄8"d
(J) 32 compartments23⁄4"w x 57⁄8"d
(J) 32 compartments23⁄4"w x 57⁄8"d
(P) 16 compartments57⁄8"w x 57⁄8"d
(E) 24 compartments57⁄8"w x 31⁄2"d & 57⁄8"w x 41⁄4"d
(E) 24 compartments57⁄8"w x 31⁄2"d & 57⁄8"w x 41⁄4"d
(E) 24 compartments57⁄8"w x 31⁄2"d & 57⁄8"w x 41⁄4"d
(J) 32 compartments23⁄4"w x 57⁄8"d
(F) 24 compartments57⁄8"w x 31⁄2"d to 71⁄2"w x 41⁄4"d
(TT) 48 compartments23⁄4"w x 31⁄2"d to 23⁄4"w x 41⁄4"d
To specify color(s) for LyonModular Drawer Cabinets TWOPREFIX LETTERS must be addedto the catalog number. The firstletter identifies the CABINETCOLOR, while the second letteridentifies the DRAWER COLOR.Example: BP 250-680C desig-nates a Wedgewood Blue (B)cabinet with Putty (P) drawers.
Dove GrayAdd prefix D to Cat. No.
PuttyAdd prefix P to Cat. No.
Wedgewood BlueAdd prefix B to Cat. No.
Cardinal RedAdd prefix H to Cat. No.
Forest GreenAdd prefix J to Cat. No.
BlackAdd prefix K to Cat. No.
49
TABL
E OF
USA
BLE
HEIG
HTS DRAWER USABLE
NUMBER HEIGHT
#40 21⁄4"#50 3"#60 37⁄8"#70 45⁄8"#80 53⁄8"#90 61⁄4"#100 7"#110 73⁄4"#120 81⁄2"#130 93⁄8"#140 101⁄8"#150 107⁄8"#160 113⁄4"#170 121⁄2"#180 131⁄4"
COLOR INFORMATIONchoose from the following
591 compartments in 17 drawersNo. 250-680ASingle Drawer AccessNo. 251-680AMultiple Drawer Access
336 compartments in 15 drawersNo. 250-680-1001 Single Drawer AccessNo. 251-680-1001 Multiple Drawer Access
269 compartments in 11 drawersNo. 250-680FSingle Drawer AccessNo. 251-680FMultiple Drawer Access
228 compartments in 10 drawersNo. 250-680KSingle Drawer AccessNo. 251-680KMultiple Drawer Access
222 compartmentsin 11 drawersNo. 250-680BSingle Drawer AccessNo. 251-680BMultiple Drawer Access
181 compartments in 8 drawersNo. 250-680ESingle Drawer AccessNo. 251-680EMultiple Drawer Access
180 compartments in 10 drawersNo. 250-680CSingle Drawer AccessNo. 251-680CMultiple Drawer Access
200 compartments in 11 drawersNo. 250-680-1007Single Drawer AccessNo. 251-680-1007Multiple Drawer Access
240 compartments in 12 drawersNo. 250-680-1005Single Drawer AccessNo. 251-680-1005Multiple Drawer Access
163 compartments in 10 drawersNo. 250-680-1021Single Drawer AccessNo. 251-680-1021Multiple Drawer Access
164 compartments in 10 drawersNo. 250-680-1010Single Drawer Access
No. 251-680-1010Multiple Drawer Access
144 compartments in 9 drawersNo. 250-680-1013Single Drawer AccessNo. 251-680-1013Multiple Drawer Access
144 compartments in 9 drawersNo. 250-680-1011Single Drawer AccessNo. 251-680-1011Multiple Drawer Access
140 compartments in 9 drawersNo. 250-680-1012Single Drawer AccessNo. 251-680-1012Multiple Drawer Access
77 compartments in 7 drawersNo. 250-680G Single Drawer AccessNo. 251-680GMultiple Drawer Access
These Platinum Series cabinet selections fulfill up to 95% of thetypical requirements for high density storage. To determine yourselections compare the size and quantities of items to be storedwith the color-coded drawer sizes in cabinets shown below.Numbers at left on each cabinet show drawers included. Lettersat right designate drawer layout kits (see pages 56-57)suggested, but not installed. See page 51 for “How to Order”.
SMALL
MEDIUM
LARGE
SMALL
MEDIUM
LARGE
DrawerNo.
Layout Kit
These color codes quickly identifyrelative drawer sizes in illustrationsbelow. See page 47 for details.
Pre-Engineered Platinum Series Cabinets…with or without Drawer Layout Kits
Mod
ular
Dra
wer
Cab
inet
sM
odul
ar D
raw
er C
abin
ets
Eye-Level High (591/4"H) Cabinets
QUICK
SHIP7 WORKING DAYS
50
To order cabinets with layout kits, see“HOW TO ORDER” instructions at right
300 compartments in 14 drawersNo. 250-680-1002Single Drawer AccessNo. 251-680-1002Multiple Drawer Access
210 compartments in 10 drawersNo. 250-680HSingle Drawer AccessNo. 251-680HMultiple Drawer Access
275 compartments in 11 drawersNo. 250-680-1020Single Drawer AccessNo. 251-680-1020Multiple Drawer Access
256 compartments in 13 drawersNo. 250-680-1003Single Drawer AccessNo. 251-680-1003Multiple Drawer Access
224 compartments in 12 drawersNo. 250-680-1004Single Drawer AccessNo. 251-680-1004Multiple Drawer Access
204 compartments in 11 drawersNo. 250-680-1008Single Drawer AccessNo. 251-680-1008Multiple Drawer Access
192 compartments in 11 drawersNo. 250-680-1006Single Drawer AccessNo. 251-680-1006Multiple Drawer Access
192 compartments in 11 drawersNo. 250-680-1019Single Drawer AccessNo. 251-680-1019Multiple Drawer Access
150 compartments in 8 drawersNo. 250-680DSingle Drawer AccessNo. 251-680DMultiple Drawer Access
164 compartments in 10 drawersNo. 250-680-1009Single Drawer AccessNo. 251-680-1009Multiple Drawer Access
104 compartments in 8 drawersNo. 250-680-1014Single Drawer AccessNo. 251-680-1014Multiple Drawer Access
80 compartments in 7 drawersNo. 250-680-1015Single Drawer AccessNo. 251-680-1015Multiple Drawer Access
64 compartments in 6 drawersNo. 250-680-1016Single Drawer AccessNo. 251-680-1016Multiple Drawer Access
37 compartments in 5 drawersNo. 250-680-1017Single Drawer AccessNo. 251-680-1017Multiple Drawer Access
29 compartments in 4 drawersNo. 250-680-1018Single Drawer AccessNo. 251-680-1018Multiple Drawer Access
Mod
ular
Dra
wer
Cab
inet
sM
odul
ar D
raw
er C
abin
ets
250 Series—Single Drawer AccessCatalog numbers with the 250 series prefix
(250-680A-3) have Safetylink.
251 Series—Multiple Drawer AccessCatalog numbers with the 251 series prefix
(251-680A-3) do not have Safetylink.
(If you are unsure which locking system you need, see page 61.)
Catalog numbers shown indicate cabinets without layoutkits. To order cabinets with layout kits installed, add the suffix -3 to the catalog number (250-680A-3 or 251-680A-3).To order cabinets with layout kits uninstalled, add the suffix -1 to the catalog number (250-680A-1 or 251-680A-1)
To custom design modular drawer cabinets see Steps 1 through 5 on pages 59-61.
To specify color(s) for Lyon Modular Drawer Cabinets, TWOPREFIX LETTERS must be added to the catalog number. The firstletter identifies the CABINET COLOR, while the second letteridentifies the DRAWER COLOR. Example: BP 250-680C or BP 251-680C designates a Wedgewood Blue (B)cabinet with Putty (P) drawers.
Dove GrayAdd prefix D to Cat. No.
PuttyAdd prefix P to Cat. No.
Wedgewood BlueAdd prefix B to Cat. No.
Cardinal RedAdd prefix H to Cat. No.
Forest GreenAdd prefix J to Cat. No.
BlackAdd prefix K to Cat. No.
51
TABL
E OF
USA
BLE
HEIG
HTS DRAWER USABLE
NUMBER HEIGHT
#40 21⁄4"#50 3"#60 37⁄8"#70 45⁄8"#80 53⁄8"#90 61⁄4"#100 7"#110 73⁄4"#120 81⁄2"#130 93⁄8"#140 101⁄8"#150 107⁄8"#160 113⁄4"#170 121⁄2"#180 131⁄4"
COLOR INFORMATION, choose from the following
HOWTO
ORDER
368 compartments in 8 drawersNo. 250-490-1013 Single Drawer AccessNo. 251-490-1013 Multiple Drawer Access
248 compartments in 11 drawersNo. 250-490-1001 Single Drawer AccessNo. 251-490-1001 Multiple Drawer Access
200 compartments in 10 drawersNo. 250-490-1002 Single Drawer AccessNo. 251-490-1002 Multiple Drawer Access
184 compartments in 9 drawersNo. 250-490-1003 Single Drawer AccessNo. 251-490-1003 Multiple Drawer Access
180 compartments in 9 drawersNo. 250-490B Single Drawer AccessNo. 251-490BMultiple Drawer Access
144 compartments in 8 drawersNo. 250-490-1005 Single Drawer AccessNo. 251-490-1005 Multiple Drawer Access
137 compartments in 7 drawersNo. 250-490D Single Drawer AccessNo. 251-490D Multiple Drawer Access
129 compartments in 7 drawersNo. 250-490E Single Drawer AccessNo. 251-490EMultiple Drawer Access
120 compartments in 7 drawersNo. 250-490FSingle Drawer AccessNo. 251-490F Multiple Drawer Access
120 compartments in 7 drawersNo. 250-490-1007 Single Drawer AccessNo. 251-490-1007 Multiple Drawer Access
98 compartments in 6 drawersNo. 250-490-1012 Single Drawer AccessNo. 251-490-1012 Multiple Drawer Access
84 compartments in 6 drawersNo. 250-490-1008 Single Drawer AccessNo. 251-490-1008 Multiple Drawer Access
78 compartments in 6 drawersNo. 250-490C Single Drawer AccessNo. 251-490C Multiple Drawer Access
64 compartments in 5 drawersNo. 250-490-1011 Single Drawer AccessNo. 251-490-1011 Multiple Drawer Access
44 compartments in 4 drawersNo. 250-490-1009 Single Drawer AccessNo. 251-490-1009 Multiple Drawer Access
Counter-High (441/4"H) Cabinets
Pre-Engineered Platinum Series CabinetsM
odul
ar D
raw
er C
abin
ets
Mod
ular
Dra
wer
Cab
inet
s
These Platinum Series cabinet selections fulfill up to95% of the typical requirements for high densitystorage. To determine your selections compare thesize and quantities of items to be stored with thecolor-coded drawer sizes in cabinets shown below.Numbers at left on each cabinet show drawersincluded. Letters at right designate drawer layout kits(see pages 56-57) suggested, but not installed.
SMALL
MEDIUM
LARGE
SMALL
MEDIUM
LARGE
DrawerNo.
Layout Kit
These color codes quicklyidentify relative drawer sizes in illustrations below.See page 47 for details.
…with or without Drawer Layout Kits
QUICK
SHIP7 WORKING DAYS
52
144 compartments in 8 drawersNo. 250-490-1004 Single Drawer AccessNo. 251-490-1004 Multiple Drawer Access
176 compartments in 8 drawersNo. 250-400A Single Drawer AccessNo. 251-400AMultiple Drawer Access
144 compartments in 6 drawersNo. 250-400-1001 Single Drawer AccessNo. 251-400-1001 Multiple Drawer Access
88 compartments in 5 drawersNo. 250-400-1003 Single Drawer AccessNo. 251-400-1003 Multiple Drawer Access
120 compartments in 7 drawersNo. 250-490-1006 Single Drawer AccessNo. 251-490-1006 Multiple Drawer Access
80 compartments in 5 drawersNo. 250-400-1002 Single Drawer AccessNo. 251-400-1002 Multiple Drawer Access
56 compartments in 4 drawersNo. 250-400-1005 Single Drawer AccessNo. 251-400-1005 Multiple Drawer Access
48 compartments in 4 drawersNo. 250-400-1004 Single Drawer AccessNo. 251-400-1004 Multiple Drawer Access
48 compartments in 2 drawersNo. 250-400-1006 Single Drawer AccessNo. 251-400-1006 Multiple Drawer Access
16 compartments in 1 drawer with lock, 1 shelfNo. 251-490-1017 Single Drawer Access
160 compartments in 7 drawersNo. 250-310A Single Drawer AccessNo. 251-310AMultiple Drawer Access
112 compartments in 5 drawersNo. 250-310B Single Drawer AccessNo. 251-310B Multiple Drawer Access
Mid-Range Height (373/16"H) CabinetsThese cabinets alsoserve as lowcounters or add topsfor use asworkstations withworkstool seating.
Designed to perfectlycomplement otherPlatinum Seriescabinets of differentheights.
Table-High (301/8"H) CabinetsAdd tops for use as seated workstations, or stack on other Table-High, Bench-High,Mid-Range Height, or Counter-Highcabinets to increase storage density.
Note: Modular drawer cabinet drawersuspension has four heavy duty, precision ballbearing rollers and one floating steel rollerper side or eight ball bearing rollers and twofloating steel rollers per track.
Mod
ular
Dra
wer
Cab
inet
sM
odul
ar D
raw
er C
abin
ets
53
TABL
E OF
USA
BLE
HEIG
HTS DRAWER USABLE
NUMBER HEIGHT
#40 21⁄4"#50 3"#60 37⁄8"#70 45⁄8"#80 53⁄8"#90 61⁄4"#100 7"#110 73⁄4"#120 81⁄2"#130 93⁄8"#140 101⁄8"#150 107⁄8"#160 113⁄4"#170 121⁄2"#180 131⁄4"
To order cabinets with layout kits, see “HOW TO ORDER” instructions above
250 Series—Single Drawer AccessCatalog numbers with the 250 series prefix
(250-680A-3) have Safetylink.
251 Series—Multiple Drawer AccessCatalog numbers with the 251 series prefix
(251-680A-3) do not have Safetylink.
(If you are unsure which locking system you need, see page 61.)
Catalog numbers shown indicate cabinets without layoutkits. To order cabinets with layout kits installed, add the suffix -3 to the catalog number (250-680A-3 or 251-680A-3).To order cabinets with layout kits uninstalled, add the suffix -1 to the catalog number (250-680A-1 or 251-680A-1)
To custom design modular drawer cabinets see Steps 1 through 5 on pages 59-61.
To specify color(s) for Lyon Modular Drawer Cabinets, TWOPREFIX LETTERS must be added to the catalog number. The firstletter identifies the CABINET COLOR, while the second letteridentifies the DRAWER COLOR. Example: BP 250-680C or BP 251-680C designates a Wedgewood Blue (B)cabinet with Putty (P) drawers.
Dove GrayAdd prefix D to Cat. No.
PuttyAdd prefix P to Cat. No.
Wedgewood BlueAdd prefix B to Cat. No.
Cardinal RedAdd prefix H to Cat. No.
Forest GreenAdd prefix J to Cat. No.
BlackAdd prefix K to Cat. No.
COLOR INFORMATION, choose from the following
HOWTO
ORDER
Mod
ular
Dra
wer
Cab
inet
sM
odul
ar D
raw
er C
abin
ets
To specify color(s) forLyon Modular DrawerCabinets TWO PREFIX LETTERS mustbe added to thecatalog number. Thefirst letter identifies theCABINET COLOR,while the second letteridentifies the DRAWERCOLOR. Example: BP 250-680Cdesignates aWedgewood Blue (B)cabinet with Putty (P)drawers.
Dove GrayAdd prefix D to Cat. No.
PuttyAdd prefix P to Cat. No.
Wedgewood BlueAdd prefix B to Cat. No.
Cardinal RedAdd prefix H to Cat. No.
Forest GreenAdd prefix J to Cat. No.
BlackAdd prefix K to Cat. No.
Pre-Engineered Platinum Series Cabinets…
QUICK
SHIP7 WORKING DAYS
54
To determine your selections from these PlatinumSeries cabinets compare the size and quantities of items to be stored with the color-coded drawersizes shown on the cabinets. Numbers at left oneach cabinet show the drawers suggested.Letters at right designate drawer layout kits (see pages 56-57) included, but not installed.
SMALL
MEDIUM
LARGE
SMALL
MEDIUM
LARGE
DrawerNo.
Layout Kit
These color codes quicklyidentify relative drawer sizes in illustrations below.See page 47 for details
Bench-High (331/4"H) Cabinets
Combination Modular Drawer and…
152 compartments in 7 drawersNo. 250-350-1001Single Drawer AccessNo. 251-350-1001Multiple Drawer Access
108 compartments in 6 drawersNo. 250-350-1002Single Drawer AccessNo. 251-350-1002 Multiple Drawer Access
88 compartments in 4 drawersNo. 250-350ASingle Drawer AccessNo. 251-350A Multiple Drawer Access
92 compartments in 5 drawersNo. 250-350-1004Single Drawer AccessNo. 251-350-1004 Multiple Drawer Access
180 compartments in 10 drawersHeight: 86"No. 250-950ASingle Drawer AccessNo. 251-950A Multiple Drawer Access
180 compartments in 10 drawersHeight: 86"No. 250-950BSingle Drawer AccessNo. 251-950B Multiple Drawer Access
Ideal comple-ment to otherPlatinum Seriesmodular drawercabinets ofvarying sizes.
Designed foruse as workstations with theaddition of topsbridging two ormore cabinets.
Also stackableto increasestorage densityin minimumfloor space.
These space-saving PlatinumSeries selectionslet you combinehigh densitystorage and bulkstorage in self-contained, freestanding units.
Shippedcompletelyassembled, each cabinet also includes oneshelf, adjustableon 3⁄4" centers.
All cabinetsshown areStandard (30"w x281⁄4"d) size.
TABLE OF USABLE HEIGHTSDRAWER USABLENUMBER HEIGHT
#40 21⁄4"#50 3"#60 37⁄8"#70 45⁄8"#80 53⁄8"#90 61⁄4"
DRAWER USABLENUMBER HEIGHT
#100 7"#110 73⁄4"#120 81⁄2"#130 93⁄8"#140 101⁄8"#150 107⁄8"#160 113⁄4"#170 121⁄2"#180 131⁄4"
COLOR INFORMATION, choose from the following
250 Series—Single Drawer AccessCatalog numbers with the 250 series prefix
(250-680A-3) have Safetylink.
251 Series—Multiple Drawer AccessCatalog numbers with the 251 series prefix
(251-680A-3) do not have Safetylink.
(If you are unsure which locking system you need, see page 61.)
Catalog numbers shown indicate cabinets without layoutkits. To order cabinets with layout kits installed, add the suffix -3 to the catalog number (250-680A-3 or 251-680A-3).To order cabinets with layout kits uninstalled, add the suffix -1 to the catalog number (250-680A-1 or 251-680A-1)
To custom design modular drawer cabinets see Steps 1 through 5 on pages 59-61.
HOWTO
ORDER
Mod
ular
Dra
wer
Cab
inet
sM
odul
ar D
raw
er C
abin
ets
with or without Drawer Layout Kits
QUICK
SHIP7 WORKING DAYS
QUICK
SHIP7 WORKING DAYS
55
Shelf Cabinet Configurations
Desk-High (267/8"H) Cabinets
104 compartments in 5 drawersNo. 250-350BSingle Drawer AccessNo. 251-350BMultiple Drawer Access
92 compartments in 5 drawersNo. 250-350-1003Single Drawer AccessNo. 251-350-1003 Multiple Drawer Access
50 compartments in 3 drawersNo. 250-270ASingle Drawer AccessNo. 251-270AMultiple Drawer Access
144 compartments in 5 drawersNo. 250-270BSingle Drawer AccessNo. 251-270B Multiple Drawer Access
16 compartments in 2 drawersNo. 250-350-1005Single Drawer AccessNo. 251-350-1005 Multiple Drawer Access
One shelf behind lockable doorNo. 250-350-1006
150 compartments in 8 drawersHeight: 86"No. 250-950CSingle Drawer AccessNo. 251-950C Multiple Drawer Access
150 compartments in 8 drawersHeight: 86"No. 250-950DSingle Drawer AccessNo. 251-950D Multiple Drawer Access
181 compartments in 8 drawersHeight: 86"No. 250-950ESingle Drawer AccessNo. 251-950E Multiple Drawer Access
181 compartments in 8 drawersHeight: 86"No. 250-950FSingle Drawer AccessNo. 251-950F Multiple Drawer Access
Add tops to createdesklike workstations, or stack toincrease storagedensity within thesame floor space.
Compatible with allother PlatinumSeries modulardrawer cabinetsshown onpreceeding pages.
SEE ADDITIONAL MODULAR DRAWER SELECTIONS ON PRECEEDING PAGES.
To order cabinetswith layout kits, see“HOW TO ORDER”instructions at left
56
Mod
ular
Dra
wer
Cab
inet
sM
odul
ar D
raw
er C
abin
ets
Pre-Engineered Drawer Layout KitsAs pictured below, pre-engineered kits consisting of galvanized partitions and dividers establish multiple compartments forvarious modular drawers. Listed are the catalog numbers for each kit, alongside the DRAWERS in which each kit will fit.
16 16
32
103 3 3 344444444
10
12
7
6
6
6
7
128
8
8
8
8
11 1110
12
8
8
8
8
128
16
11
10
11
16
4333333334
8 8 8 8
6 65
8
8
8
8
5 5 5
12
11
10
11
128
8
8
8
8
8
8 8 8
16 16
16
16
10 12
11
10
11
10 16 16
8
8
8
8
8 8
5
5
5
5
6
6
8 8
16
6
5555
6
16
44444444
12 128
(A) 2 compartments121⁄4"w x 251⁄8"dCat. No. Drawers240-A45 40 & 50240-A67 60 & 70240-A89 80 & 90240-A100 100+
(B) 4 compartments121⁄4"w x 121⁄4"dCat. No. Drawers240-B45 40 & 50240-B67 60 & 70240-B89 80 & 90240-B100 100+
(C) 9 compartments71⁄2"w x 71⁄2"d to 91⁄8"w x 81⁄4"dCat. No. Drawers240-C45 40 & 50240-C67 60 & 70240-C89 80 & 90240-C100 100+
(Z) 48 compartments17⁄8"w x 23⁄4"d to 71⁄4"w x 23⁄4"dCat. No. Drawers240-Z45 40 & 50240-Z67 60 & 70240-Z89 80 & 90240-Z100 100+
(AA) 64 Plastic Bins3"w x 3"d and partition Cat. No. Drawers240-AA45 40 & 50240-AA67 60 & 70
(BB) 32 Plastic Bins3"w x 6"d and partition Cat. No. Drawers240-BB45 40 & 50240-BB67 60 & 70
(CC) 16 Plastic Bins6"w x 6"d and partition Cat. No. Drawers240-CC45 40 & 50240-CC67 60 & 70
(DD) Four 20-com-partment Quarter Trays Cat. No. Drawers240-DD45 40 & 50
(KK) 15 compartments57⁄8"w x 41⁄4"d to91⁄2"w x 51⁄8"dCat. No. Drawers240-KK45 40 & 50240-KK67 60 & 70240-KK89 80 & 90240-KK100 100+
(LL) 12 compartments57⁄8"w x 57⁄8"d to91⁄2"w x 57⁄8"dCat. No. Drawers240-LL45 40 & 50240-LL67 60 & 70240-LL89 80 & 90240-LL100 100+
(MM) 40 compartments57⁄8"w x 17⁄8"d to57⁄8"w x 23⁄4"dCat. No. Drawers240-MM45 40 & 50240-MM67 60 & 70240-MM89 80 & 90240-MM100 100+
(NN) 9 compartments57⁄8"w x 71⁄4"d to91⁄2"w x 81⁄4"dCat. No. Drawers240-NN45 40 & 50240-NN67 60 & 70240-NN89 80 & 90240-NN100 100+
(L) 12 compartments81⁄4"w x 57⁄8"d & 71⁄2"w x 57⁄8"dCat. No. Drawers240-L45 40 & 50240-L67 60 & 70240-L89 80 & 90240-L100 100+
(M) 6 compartments121⁄4"w x 71⁄4"d to 81⁄4"d Cat. No. Drawers240-M45 40 & 50240-M67 60 & 70240-M89 80 & 90240-M100 100+
(E) 24 compartments57⁄8"w x 31⁄2"d & 57⁄8"w x 41⁄4"dCat. No. Drawers240-E45 40 & 50240-E67 60 & 70240-E89 80 & 90240-E100 100+
(D) 8 compartments121⁄4"w x 57⁄8"d Cat. No. Drawers240-D45 40 & 50240-D67 60 & 70240-D89 80 & 90240-D100 100+
(N) 24 compartments31⁄2"w x 57⁄8"d & 41⁄4"w x 57⁄8"dCat. No. Drawers240-N45 40 & 50240-N67 60 & 70240-N89 80 & 90240-N100 100+
(P) 16 compartments57⁄8"w x 57⁄8"d Cat. No. Drawers240-P45 40 & 50240-P67 60 & 70240-P89 80 & 90240-P100 100+
(R) 12 compartments121⁄4"w x 31⁄2"d to41⁄4"d Cat. No. Drawers240-R45 40 & 50240-R67 60 & 70240-R89 80 & 90240-R100 100+
(RR) 18 compartments57⁄8"w x 23⁄4"d to91⁄2"w x 23⁄4"dCat. No. Drawers240-RR45 40 & 50240-RR67 60 & 70240-RR89 80 & 90240-RR100 100+
57
Mod
ular
Dra
wer
Cab
inet
sM
odul
ar D
raw
er C
abin
ets
Many of these kits are included with pre-engineered modular drawer cabinets shown on pages 50-55. All may be ordered separately to compartmentalize cabinet selections ordered without kits.The numbers shown around the perimeter of each drawing indicate the number of divider spacesneeded to size each compartment.
Also, see Plastic Bins on page 62 and Quarter Trays, page 63.
7 7
8
8
8
8
6 6 64 4 4 4 4 4 4 4
8
8
8
8
4 4 4 4 4 4 4 4
6
6
5
55
5
6 66
6
5 5 5 5
555
5
6 6 6 6 8
7
7
6
6
6
7 106
6
7 8
555
5
1644444444
16 12 8
16
16
12 12 8
7
6
6
6
7
12 12 8
6
5
5
55
6
12
88
16
16
8 8
12 844444444
12
88
4 4 4 4 4 4 4 4
13
19
8 8
12
16
16
128
11
10
11
8 88812 8
11
10
11
12 12 8
8
8
8
8
12
(K) 20 compartments41⁄4"w x 57⁄8"d & 51⁄8"w x 57⁄8"dCat. No. Drawers240-K45 40 & 50240-K67 60 & 70240-K89 80 & 90240-K100 100+
(FF) Milling Cutters Kitw/panel inserts, 1 par-tition, 41 Locator Posts(5⁄8"dia.) & 30 ArborBushings (1⁄2" to 17⁄16"dia.)Milling CuttersCat. No. Drawers240-FF45 40 & 50240-FF67 60 & 70
(F) 24 compartments57⁄8"w x 31⁄2"d to 71⁄2"w x 41⁄4"dCat. No. Drawers240-F45 40 & 50240-F67 60 & 70240-F89 80 & 90240-F100 100+
(G) 25 compartments41⁄4"w x 41⁄4"d to 57⁄8"w x 51⁄8"dCat. No. Drawers240-G45 40 & 50240-G67 60 & 70240-G89 80 & 90240-G100 100+
(H) 36 compartments31⁄2"w x 31⁄2"d to 41⁄4"w x 41⁄4"dCat. No. Drawers240-H45 40 & 50240-H67 60 & 70240-H89 80 & 90240-H100 100+
(TT) 48 compartments23⁄4"w x 31⁄2"d to 23⁄4"w x 41⁄4"dCat. No. Drawers240-TT45 40 & 50240-TT67 60 & 70240-TT89 80 & 90240-TT100 100+
(J) 32 compartments23⁄4"w x 57⁄8"d Cat. No. Drawers240-J45 40 & 50240-J67 60 & 70240-J89 80 & 90240-J100 100+
(S) 16 compartments121⁄4"w x 23⁄4"d Cat. No. Drawers240-S45 40 & 50240-S67 60 & 70240-S89 80 & 90240-S100 100+
(T) 5 compartments91⁄2"w x 121⁄4"d &57⁄8"w x 241⁄2"d Cat. No. Drawers240-T45 40 & 50240-T67 60 & 70240-T89 80 & 90240-T100 100+
(W) 11 compartments91⁄2"w x 41⁄4"d to57⁄8"w x 241⁄2"d Cat. No. Drawers240-W45 40 & 50240-W67 60 & 70240-W89 80 & 90240-W100 100+
(X) 13 compartments91⁄2"w x 31⁄2"d to57⁄8"w x 241⁄2"d Cat. No. Drawers240-X45 40 & 50240-X67 60 & 70240-X89 80 & 90240-X100 100+
(EE) Four 35-compart-ment Quarter Trays Cat. No. Drawers240-EE45 40 & 50
(HH) 8 compartments57⁄8"w x 121⁄4"d Cat. No. Drawers240-HH45 40 & 50240-HH67 60 & 70240-HH89 80 & 90
10
11
11
10
3 6 355
55
6
6
88
8
8
8
8
8
8
10
(GG) 21 compartments17⁄8"w x 31⁄8"d to 71⁄4"w x 103⁄4"dCat. No. Drawers240-GG45 40 & 50240-GG67 60 & 70240-GG89 80 & 90240-GG100 100+
(Y) 17 compartments91⁄2"w x 23⁄4"d to 57⁄8"w x241⁄2"d Cat. No. Drawers240-Y45 40 & 50240-Y67 60 & 70240-Y89 80 & 90240-Y100 100+
(JJ) 12 compartments23⁄4"w x 143⁄4"d & 57⁄8"w x 97⁄8"d Cat. No. Drawers240-JJ45 40 & 50240-JJ67 60 & 70240-JJ89 80 & 90
(SS) 6 compartments57⁄8"wx121⁄4"d to121⁄4"wx121⁄4"dCat. No. Drawers240-SS45 40 & 50240-SS67 60 & 70240-SS89 80 & 90240-SS100 100+
(YY) 12 compartments57⁄8"w x 71⁄2"d to57⁄8"w x 81⁄4"dCat. No. Drawers240-YY45 40 & 50240-YY67 60 & 70240-YY89 80 & 90240-YY100 100+
(XX) 7 compartments91⁄2"w x 71⁄4"d to57⁄8"w x 241⁄2"dCat. No. Drawers240-XX45 40 & 50240-XX67 60 & 70240-XX89 80 & 90240-XX100 100+
(ZZ) 9 compartments91⁄2"w x 57⁄8"d to57⁄8"w x 241⁄2"dCat. No. Drawers240-ZZ45 40 & 50240-ZZ67 60 & 70240-ZZ89 80 & 90240-ZZ100 100+
Mod
ular
Dra
wer
Cab
inet
sM
odul
ar D
raw
er C
abin
ets
Pre-Engineered Platinum Series Cabinets
QUICK
SHIP7 WORKING DAYS
QUICK
SHIP7 WORKING DAYS
58
Extra-Wide 45"W Cabinets
Double Wide 60"W Cabinets18
8
8
8
8
16 17 18 23 23 23
8
8
8
8
35
8
8
8
8
34
9 98888
8
8
8
8
12 12 1313
8
8
8
8
161816
8
8
8
8
10 10101010
8
8
8
8
Platinum Series Extra Wide andDouble Wide Modular DrawerCabinets Complete with Layout KitsSecure big, wide and long items with morecompartment capacity at every drawer level.Payload capacity of 400 lbs. per drawer with allthe features described on pages 46-47, includ-ing wide forklift bases and base closure strips. The drawings below indicate drawer selectionswith numbers shown on left and layout kits withletters on the right.
A full 50% larger than standardcabinets for use where floor spacemay be limited.
Twice as wide as standard cabinets tomore than double the capacity withineach unit.
12 drawers, 224 compartmentsNo. 250-680X-1004 Single Drawer AccessNo. 251-680X-1004 Multiple Drawer Access
7 drawers, 80 compartmentsNo. 250-680XL-1015 Single Drawer AccessNo. 251-680XL-1015 Multiple Drawer Access
6 drawers, 64 compartmentsNo. 250-680XL-1016 Single Drawer AccessNo. 251-680XL-1016 Multiple Drawer Access
11 drawers, 192 compartmentsNo. 250-680X-1019 Single Drawer AccessNo. 251-680X-1019 Multiple Drawer Access
250 Series—Single Drawer AccessCatalog numbers with the 250 series prefix
(250-680A-3) have Safetylink.
251 Series—Multiple Drawer AccessCatalog numbers with the 251 series prefix
(251-680A-3) do not have Safetylink.
(If you are unsure which locking system you need, see page 61.)
Catalog numbers shown indicate cabinets without layoutkits. To order cabinets with layout kits installed, add the suffix -3 to the catalog number (250-680A-3 or 251-680A-3).To order cabinets with layout kits uninstalled, add the suffix -1 to the catalog number (250-680A-1 or 251-680A-1)
To custom design modular drawer cabinets see Steps 1 through 5 on pages 59-61.
HOWTO
ORDER
TABL
E OF
USA
BLE
HEIG
HTS DRAWER USABLE
NUMBER HEIGHT
#40 21⁄4"#50 3"#60 37⁄8"#70 45⁄8"#80 53⁄8"#90 61⁄4"#100 7"#110 73⁄4"#120 81⁄2"#130 93⁄8"#140 101⁄8"#150 107⁄8"#160 113⁄4"#170 121⁄2"#180 131⁄4"
(NX) 24 compartments57⁄8"w x 57⁄8"d to 57⁄8"w x 63⁄4"dCat. No. Drawers240-N45X 40 & 50240-N67X 60 & 70240-N89X 80 & 90240-N100X 100+
(PX) 16 compartments91⁄2"w x 57⁄8"d to 97⁄8"w x 57⁄8"dCat. No. Drawers240-P45X 40 & 50240-P67X 60 & 70240-P89X 80 & 90240-P100X 100+
(PXL) 16 compartments57⁄8"w x 121⁄4"d to 57⁄8"w x 137⁄8"dCat. No. Drawers240-P45XL 40 & 50240-P67XL 60 & 70240-P89XL 80 & 90240-P100XL 100+
(LXL) 12 compartments171⁄2"w x 57⁄8"d
Cat. No. Drawers240-L45XL 40 & 50240-L67XL 60 & 70240-L89XL 80 & 90240-L100XL 100+
(DXL) 8 compartments267⁄8"w x 57⁄8"dCat. No. Drawers240-D45XL 40 & 50240-D67XL 60 & 70240-D89XL 80 & 90240-D100XL 100+
(LX)12compartments121⁄4"w x 57⁄8"d to 133⁄4"w x 57⁄8"dCat. No. Drawers240-L45X 40 & 50240-L67X 60 & 70240-L89X 80 & 90240-L100X 100+
(KX) 20 compartments71⁄2"w x 57⁄8"dCat. No. Drawers240-K45X 40 & 50240-K67X 60 & 70240-K89X 80 & 90240-K100X 100+
Slenderline 23" Wide Cabinets
No. 250-270SLNo. 251-270SL
No. 250-310SLNo. 251-310SL
No. 250-350SLNo. 251-350SL
No. 250-400SLNo. 251-400SL
No. 250-490SLNo. 251-490SL
No. 250-680SLNo. 251-680SL
(2213⁄16 actual)
Mod
ular
Dra
wer
Cab
inet
sM
odul
ar D
raw
er C
abin
ets
How to Custom Design Platinum Series Modular Drawer Cabinets in 5 Easy Steps!
59
1Choosing from the cabinet styles and heights shown below,identify the cabinet(s) that meet your workspace requirementsin terms of utilization and ultimate location as suggested below.All Platinum Series Cabinets are 281⁄4" deep.
*Tops add utility for use as desks, worktables or workbenches. Highly visiblework surface
For maximum cube utilization
Desk High*267⁄8″h
Table High*301⁄8″h
Bench High*331⁄4″h
Mid-Range Height*371⁄4″h
Counter High441⁄4″h
Eye-Level Height591⁄4″h
Desk High*267⁄8″h
Table High*301⁄8″h
Bench High*331⁄4″h
Mid-Range Height*371⁄4″h
Counter High441⁄4″h
Eye-Level Height591⁄4″h
Medium 36" Wide Cabinets
Extra-Wide 45" Wide Cabinets
Double Wide 60" Wide Cabinets
No. 250-270MNo. 251-270M
No. 250-270XNo. 251-270X
No. 250-270XLNo. 251-270XL
No. 250-310XLNo. 251-310XL
No. 250-350XLNo. 251-350XL
No. 250-400XLNo. 251-400XL
No. 250-490XLNo. 251-490XL
No. 250-680XLNo. 251-680XL
No. 250-310XNo. 251-310X
No. 250-350XNo. 251-350X
No. 250-400XNo. 251-400X
No. 250-490XNo. 251-490X
No. 250-680XNo. 251-680X
No. 250-310MNo. 251-310M
No. 250-350MNo. 251-350M
No. 250-400MNo. 251-400M
No. 250-490MNo. 251-490M
No. 250-680MNo. 251-680M
(363⁄8″ actual)
Standard 30" Wide Cabinets (30″ actual)
(443⁄8″ actual)
(595⁄8″ actual)
No. 250-270No. 251-270
No. 250-310No. 251-310
No. 250-350No. 251-350
No. 250-400No. 251-400
No. 250-490No. 251-490
No. 250-680No. 251-680
60
Mod
ular
Dra
wer
Cab
inet
sM
odul
ar D
raw
er C
abin
ets
How to Custom Design Platinum Series…
2Drawer Selection• To determine which drawers are needed to store your products, begin
by defining the products and arranging them according to height. (If you would like professional assistance in this regard, please call 1-800-323-0082.)
• Then, measure the height of products to be stored which will reveal the drawer heights needed.
• Based upon your normal inventory levels, determine the total square footage (area) needed for each productgroup according to drawer heights.
• Take the square footage arrived at above for eachdrawer height and divide that number by:
4.4 (for drawers in 30"w cabinets)3.1 (for drawers in 23"w cabinets)5.5 (for drawers in 36"w cabinets)6.9 (for drawers in 45"w cabinets)9.5 (for drawers in 60"w cabinets)
Example: Assuming a 30"w cabinet and a product group requiring 21 square feet: 21÷4.4 = 4.77 rounded to thenext whole number (5) reveals five drawers of that height are needed for this product group.
Repeat this step for each product group toarrive at the total number and heights ofmodular drawers needed.
• Add for future expansion simply bymultiplying the total square footage for anyproduct (height) grouping by the percent ofincrease anticipated.
• Based on your total drawer requirementsand your initial cabinet selection(s) frompage 59 (STEP 1) you can now verify yourcabinet choices, making sure that thecabinets selected will accommodate thedrawers required—simply by adding up thecatalog numbers of the drawers to equal thecatalog number of the cabinet. For example:
Six No. 250-40 or 251-40 Drawers = 250Four No. 250-50 or 251-50 Drawers = 200Four No. 250-60 or 251-60 Drawers = 250
Drawer Totals 680(No. 250-680 or 251-680 cabinet)
• When ordering,remember thatdrawers will beassembled into eachcabinet for shipment.So, to receive theexample above youwould order one No.250-680 or 251-680cabinet with 14drawers in sequence(top to bottom): sixNo. 250-40 or 251-40,four No. 250-50 or 251-50 and four No. 250-60 or 251-60.
• Be sure to consider ergonomic factors for storage and retrieval: Fast-moving, highactivity items are stored together with fastmovers located in front (prime pick areas)for easy selection. Prime pick areas aregenerally located just below waist-level andabove for quick visual and physical access.Slower moving items can be stored in lowerdrawers.
Small Drawers
Medium Size
Drawers
Large and
ExtraLarge
Drawer Sizes
31⁄16" 21⁄4" 25✖*-40SL 25✖
*-40 25✖*-40M 25✖
*-40X 25✖*-40XL
37⁄8" 3" 25✖*-50SL 25✖
*-50 25✖*-50M 25✖
*-50X 25✖*-50XL
45⁄16" 37⁄8" 25✖*-60SL 25✖
*-60 25✖*-60M 25✖
*-60X 25✖*-60XL
57⁄16" 45⁄8" 25✖*-70SL 25✖
*-60 25✖*-60M 25✖
*-70X 25✖*-70XL
63⁄16" 53⁄8" 25✖*-80SL 25✖
*-80 25✖*-80M 25✖
*-80X 25✖*-80XL
7" 61⁄4" 25✖*-90SL 25✖
*-90 25✖*-90M 25✖
*-90X 25✖*-90XL
73⁄4" 7" 25✖*-100SL 25✖
*-100 25✖*-100M 25✖
*-100X 25✖*-100XL
89⁄16" 73⁄4" 25✖*-110SL 25✖
*-110 25✖*-110M 25✖
*-110X 25✖*-110XL
93⁄8" 81⁄2" 25✖*-120SL 25✖
*-120 25✖*-120M 25✖
*-120X 25✖*-120XL
101⁄4" 93⁄8" 25✖*-130SL 25✖
*-130 25✖*-130M 25✖
*-130X 25✖*-130XL
107⁄8" 101⁄8" 25✖*-140SL 25✖
*-140 25✖*-140M 25✖
*-140X 25✖*-140XL
113⁄4" 107⁄8" 25✖*-150SL 25✖
*-150 25✖*-150M 25✖
*-150X 25✖*-150XL
121⁄2" 113⁄4" 25✖*-160SL 25✖
*-160 25✖*-160M 25✖
*-160X 25✖*-160XL
1315⁄16" 121⁄2" 25✖*-170SL 25✖
*-170 25✖*-170M 25✖
*-170X 25✖*-170XL
141⁄16" 131⁄4" 25✖*-180SL 25✖
*-180 25✖*-180M 25✖
*-180X 25✖*-180XL
*IMPORTANT: You must specify: A. Single drawer access(unopened drawers are locked in place when one draweris pulled out) by replacing the ✖ with a 0 (250); or B. Multipledrawer access (multiple drawers in the same cabinet may beopened simultaneously) by replacing the ✖ with a 1 (251).
DrawerFront
Height
UseableDrawerHeight
StandardWidth(30"w)
Slender-line
(23"w)
MediumWidth(36"w)
ExtraWide
(45"w)
DoubleWide
(60"w)
Dove GrayAdd prefix D to Cat. No.
PuttyAdd prefix P to Cat. No.
Wedgewood BlueAdd prefix B to Cat. No.
Cardinal RedAdd prefix H to Cat. No.
Forest GreenAdd prefix J to Cat. No.
BlackAdd prefix K to Cat. No.
61
Mod
ular
Dra
wer
Cab
inet
sM
odul
ar D
raw
er C
abin
ets
Modular Drawer Cabinets (cont.)
COLOR INFORMATION
Optional Locking Systems Master Keyed• For one-key access to cabinets with different locks. No. 240-MK-1. Master Key for Cabinet Locks.
Keyed Alike• For one-key access to cabinets with identical locks.Nos. 240-KA-1, 240-KA-2, 240-KA-3, 240-KA-4, 240-KA-5
Individual Drawer Lock (Factory Installed)• Lock each drawer individually. Separate key for
each drawer controls access. • Security panel protects contents of drawer below
when drawer above is open. • Order one lock per drawer. (Ten drawers will
require ten locks). • Not available on “40” drawer. • NOTE: Reduces usable space 1⁄2".No. 240-IDL-1 RIGHT SIDENo. 240-IDL-2 BOTH SIDES
Hinged Lock Bar on Cabinet• Factory installed on right side of cabinet only.• Secures all drawers with padlocked bar (padlock not
included). • Ideal for mobile applications or use in high-risk locations. • Order one lockbar per cabinet, based on cabinet height.
(Example: Order No. 240-ELB-270 for cabinet No. 250-270).
Latch-in/Latch-out (Factory Installed)• Prevents drawers from moving when
fully opened or closed. • Pushing latch rod releases drawer. • Ideal for cabinets on casters. • Order one latch per drawer.
(Ten drawers will require ten latches). No. 250-LILO LEFT SIDE ONLY
*Note: Floor anchoring or joining cabinets side-by-side is recommended to maximize stability of cabinet installations.
3Locking Systems
4
5
Drawer Layout Kits or Partitions & Dividers
8
8
8
8
8
8 8 8 1644444444
16 12 8
16
16
12
88
4 4 4 4 4 4 4 4
13
19
8 8
Pre-engineered Drawer Layout Kits shown on pages 56and 57 are designed to satisfy nearly every requirementfor efficient storage and retrieval of most products. Ifyour requirements cannot be met with selections fromthese 40 pre-engineered kits, see partitions and dividerslisted on the following page.
Six standard colors offer the potential for as many as 36cabinet-and-drawer color combinations. To specifycolor(s) for Platinum Series modular drawer cabinetsTWO PREFIX LETTERS must be added to the catalognumber of each cabinet. The FIRST LETTER defines thecolor of the CABINET, while the SECOND LETTERdefines the color of the DRAWERS within the cabinet. BP 250-680 for example, designates a Wedgewood Bluecabinet with Putty Drawers.
103 3 3 344444444
10
4 4 4 4 4 4 4 4
6
6
5
55
5
ColorSelections
Safetylink Locking Systems250 Cabinet SeriesUnless otherwise specified:• Safetylink locking systems included on all Platinum Series Modular
Drawers.• Safetylink automatically locks unopened drawers in place when one
drawer is pulled out — preventing accidental tipping and potentialfor injury.
• Two keys included.• Anchor kit included.
Locking Systems for Multiple Drawer Access251 Cabinet Series• Allows the user to access multiple drawers at one time, Safetylink
feature eliminated.• Cabinet and all drawers lock when key is turned.• Anchor kit is included.• Two keys included.
Cabinets without Lock or Safetylink• Cabinets have multiple drawer access.• No lock for cabinet or drawers.• In the interest of safety, Lyon strongly recommends anchoring
cabinets with Lyon anchor kits (supplied with each cabinet) whenlocks and Safetylink are removed.
• Catalog Numbers: (must be ordered with 251 cabinets only)251-DINT270 for 270 Series251-DINT310 for 310 Series251-DINT350 for 350 Series
251-DINT400 for 400 Series251-DINT490 for 490 Series251-DINT680 for 680 Series
62
Mod
ular
Dra
wer
Cab
inet
sM
odul
ar D
raw
er C
abin
ets
Modular Drawer Partitions and Dividers
17⁄8" 23⁄4" 31⁄2" 41⁄4" 51⁄8" 57⁄8" 63⁄4" 71⁄4" 81⁄4" 91⁄2" 97⁄8" 103⁄4" 111⁄2" 121⁄4" 131⁄8" 137⁄8" 143⁄4" 151⁄2" 161⁄4"
D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 D14 D15 D16 D17 D18 D19 D20 D21
3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21
PartitionsUsed to divide drawer front-to-back, or side-to-side. Slots on both sides accept dividers (below).Attach to drawer bottom with screws (included).
Dividers Further subdivide compartments by sliding dividers into slots of partitions.STEP 1 – Determine the drawer divider number you will be using the dividers in. STEP 2 – Determine the width required, in inches.STEP 3 – From the chart below, select the appropriate width and the corre-sponding divider number. Example: 31⁄2" required equals divider number D5.STEP 4 – Use the drawer catalog numbers as a prefix to complete the correctcatalog number. Example: Drawer catalog number is 240-45, divider catalognumber is 240-45-D5.
Plastic Label HoldersAttach directly to top of divider for easy identification of assigned compartments.No. 240-503 – 25-pack of label holders, fits all dividers.
Standard PartitionsFor front-to-back, or side-to-side in standard 30"w cabinets, or front-to-back in 23", 36", 45", and 60"w cabinets.No. 240-45P – fits #40-50 drawersNo. 240-67P – fits #60-70 drawersNo. 240-89P – fits #80-90 drawersNo. 240-100P – fits #100+ drawers
Slenderline PartitionsFor side-to-side on 23"w SlenderlineCabinets.No. 240-45PSL – fits #40-50 drawersNo. 240-67PSL – fits #60-70 drawersNo. 240-89PSL – fits #80-90 drawersNo. 240-100PSL – fits #100+ drawers
Extra Wide PartitionsFor side-to-side on 45"w Extra Wide Cabinets.No. 240-45PX – fits #40-50 drawersNo. 240-67PX – fits #60-70 drawersNo. 240-89PX – fits #80-90 drawersNo. 240-100PX – fits #100+ drawers
Double Wide PartitionsFor side-to-side on 60"w Double Wide Cabinets.No. 240-45PXL – fits #40-50 drawersNo. 240-67PXL – fits #60-70 drawersNo. 240-89PXL – fits #80-90 drawersNo. 240-100PXL – fits #100+ drawers
Partitions
32 Spaces
DividersYellow Bins
250-503PlasticLabel
Holders
Divider Space TotalsCabinet Width Side-To-Side Total Drawer Clear Width23" Slenderline 23 1715⁄16
30" Standard 32 251⁄836" Medium Wide 40 311⁄245" Extra Wide 50 391⁄260" Double Wide 69 5411⁄16
Plastic Bins and DividersStandard Yellow BinsRemovable. Subdivide with corresponding dividers. Built in label holders.Conductive BinsLike above, but with high carbon contentfor anti-static applications.
32 S
pace
s
Note: All drawers have 32 spaces front to rear = 251⁄8" clear
171⁄8" 177⁄8" 185⁄8"
D22 D23 D24
22 23 24
Note: Dividers are nominally 3⁄8" wider than visible compartment width.
Unless otherwise indicated, partitions and dividers will be bulk packed
at random in cabinet drawers. If required, indicate the cabinet and
drawer, in which partitions and dividers are to be packed.
Compart. Width
Catalog Number
Divider Space
ConductiveBins
GalvanizedPartitions and Dividers
COLOR INFORMATIONThese items only available in:
instock
WxDxH Std. Drawer Bin Divider Bin Divider
Yellow Plastic ConductiveSize Qty. To Fill Cat. No. Cat. No. Cat. No. Cat. No.
3" x 3" x 2" 64 240-332 240-332-DIV 240-332CB 240-332CB-DIV3" x 6" x 2" 32 240-362 240-332-DIV 240-362CB 240-332CB-DIV6" x 6" x 2" 16 240-662 240-662-DIV 240-662CB 240-662CB-DIV3" x 3" x 3" 64 240-333 240-333-DIV 240-333CB 240-333CB-DIV3" x 6" x 3" 32 240-363 240-333-DIV 240-363CB 240-333CB-DIV6" x 6" x 3" 16 240-663 240-663-DIV 240-663CB 240-663CB-DIV
Medium Wide PartitionsFor side-to-side on 36"w Medium Cabinets.No. 240-45PM– fits #40-50 drawersNo. 240-67PM – fits #60-70 drawersNo. 240-89PM – fits #80-90 drawersNo. 240-100PM – fits #100+ drawers
63
Mod
ular
Dra
wer
Cab
inet
sM
odul
ar D
raw
er C
abin
ets
Modular Drawer Accessories
Quarter TraysConvenient and cost-efficientway to store very small, looseitems. Four trays fill a standard 30"w drawer. Use partitionsand dividers to hold fewer than four trays in place. Overall: 129⁄16"w x 129⁄16"d x 11⁄4"h.No. 240-420 – 20-compartmentNo. 240-435 – 35-compartment
High-Impact Plastic Groove TraysProtects the edges of expensive cutting tools. Trays are 31⁄8"w x 25" long and come in four models, 1-4 grooves.Excellent for storage of drill bits and other elongated items.No. 240-201 – 1 groove, for items up to 25⁄8" diameterNo. 240-202 – 2 groove, for items up to 117⁄64" diameterNo. 240-203 – 3 groove, for items up to 57⁄64" diameterNo. 240-204 – 4 groove, for items up to 43⁄64" diameterNo. 240-199 – Divider for 1 and 3-groove traysNo. 240-200 – Dividers for 2 and 4-groove trays
Milling Cutter HoldersLocator pins and arbor bushings are perfect for storingmilling cutters or any item with a center hole. Plastic arborbushings simply slide onto the 5⁄16" diameter locator pins. Pinsmust be attached to the Galvanized Drawer-Bottom Panel.No. 240-212 – Locator Pin, 5⁄16" diameter x 19⁄16"hNo. 240-205 – Arbor Bushing, 1⁄2" diameter x 217⁄32"h No. 240-217 – Arbor Bushing, 15⁄16" diameter x 117⁄32"h No. 240-206 – Arbor Bushing, 15⁄16" diameter x 217⁄32"h No. 240-218 – Arbor Bushing, 13⁄16" diameter x 117⁄32"h No. 240-207 – Arbor Bushing, 13⁄16" diameter x 217⁄32"h No. 240-219 – Arbor Bushing, 17⁄16" diameter x 117⁄32"h No. 240-208 – Arbor Bushing, 17⁄16" diameter x 217⁄32"h No. 240-220 – Galvanized Drawer-Bottom Insert, 125⁄16"w x 25"d
Rubber MatsRibbed non-skid tops madeof grease resistant pliablerubber. Black only.No. 240-250 – for 30"w cabinetNo. 240-250SL – for 23"w cabinetNo. 240-250M – for 36"w cabinetNo. 240-250X – for 45"w cabinetNo. 240-250XL – for 60"w cabinet
Laminated HardwoodCabinet TopsKiln-dried maple or birch stripsapproximately 2" wide, 13⁄4"thick. Waterproof glue bondsstrips. Natural wood finish issanded to a smooth surface.No. 240-251– for 30"w cabinetNo. 240-251SL – for 23"w cabinetNo. 240-251M – for 36"w cabinetNo. 240-251X – for 45"w cabinetNo. 240-251XL – for 60"w cabinet
Drawer Bottom Inserts*Help to protect fragile instruments, also used as dust cover.No. 240-221 – Green felt, 25" x 25"No. 240-222 – Polyester black mesh, 25" x 25"No. 240-223 – Plastic sheet, 25" x 25"*For 30" wide cabinets only.Drawer Handle Accessories (not pictured)No. 240-111 – Clear plastic shield for drawer handlesNo. 240-112 – Cardboard label for drawer handleStacking Reinforcements - Factory Installed (not pictured)No. 240-SR270 – No. 270 cab. No. 240-SR400 – No. 400 cab.No. 240-SR310 – No. 310 cab. No. 240-SR490 – No. 490 cab.No. 240-SR350 – No. 350 cab. No. 240-SR680 – No. 680 cab.No. 240-STK5 – Holes pre-drilled with hardware for stacking cabinetsNo. 240-STK1 – Hardware only (holes must be drilled in the field forstacking cabinets)
Caster and Handle KitConvert your 270, 310, 350 in 22/30" wide cabinets into a mobileunit. Kit includes two stationary, and two swivel casters, apainted handle, and necessary hardware. We strongly recommendour latch-in/latch-out feature for all mobile storage applications.No. 240-502 – 2600 lb. cap. 5" casters raise cabinet height 61⁄2".No. 240-602 – 2800 lb. cap. 6" casters raise cabinet height 7".No. 240-512 – 2600 lb. cap. 5" casters for cabinets w/o base channels.No. 240-603 – 2800 lb. cap. 6" casters for cabinets w/o base channels.
Yellow
COLOR INFORMATIONThese items only available in:
Mod
ular
Dra
wer
Cab
inet
sM
odul
ar D
raw
er C
abin
ets
Platinum Series Shelf Cabinets
To specify color(s) for Lyon Modular DrawerCabinets TWO PREFIX LETTERS must be addedto the catalog number. The first letter identifiesthe CABINET COLOR, while the second letteridentifies the DRAWER COLOR. Example: BP250-680C or 251-680C designates aWedgewood Blue (B) cabinet with Putty (P)drawers.
Dove GrayAdd prefix Dto Cat. No.PuttyAdd prefix Pto Cat. No.Wedgewood BlueAdd prefix Bto Cat. No.
Cardinal RedAdd prefix Hto Cat. No.Forest GreenAdd prefix Jto Cat. No.BlackAdd prefix Kto Cat. No.
64
40
40
50
70
Modular Drawer Cabinets with Doors
(A) Shelf Cabinets (Order shelves separately. Base shelves supplied.)Complement modular drawer cabinets with open shelf cabinets for bulky packages, materials. Adjust shelves on 3⁄4" centers. All 281⁄4" deep. Order below.
(C) Roll-Out Shelves for Modular Drawer CabinetsFor cabinets without doors. Extends contents for easier access. Shelves feature 11⁄2" retainer on sides and backs.
250-22R - 23" width - 251-22R250-30R - 30" width - 251-30R250-36R - 36" width - 251-36R250-45R - 45" width - 251-45R250-60R - 60" width - 251-60R
Space saving 30" wide cabinets combine bulk and high densitystorage in one unit. Key lock for drawers with two keys included.Drawers and doors keyed alike.
D 400 320180
210
EF G H
I
223⁄4"w 30"w 36"w 45"w 60"wStyle/Height Slender Line Standard Medium Extra-Wide Double-Wide
Desk, 267⁄8"h 250-270SLSC 250-270SC 250-270MSC 250-270XSC 250-270XLSC
Table, 301⁄8"h 250-310SLSC 250-310SC 250-310MSC 250-310XSC 250-310XLSC
Bench, 331⁄4"h 250-350SLSC 250-350SC 250-350MSC 250-350XSC 250-350XLSC
Mid-Range, 373⁄16"h 250-400SLSC 250-400SC 250-400MSC 250-400XSC 250-400XLSC
Counter, 441⁄4"h 250-490SLSC 250-490SC 250-490MSC 250-490XSC 250-490XLSC
Eye Level, 591⁄4"h 250-680SLSC 250-680SC 250-680MSC 250-680XSC 250-680XLSC
(B) Shelf for Shelf CabinetsShelf, 3/4" retainer 240-22S 240-30S 240-36S 240-45S 240-60Son sides and backs
Single Drawer Access Multiple Drawer AccessStyle/Height Cat. No. Cat. No. Drawers Door
(D) Counter, 441⁄4"h 250-490D130A 251-490D130A 250 or 251 -40, -50 27"h
(E) Bench, 331⁄4"h 250-350D70A 251-350D70A 250 or 251 -70 21"h
(F) Eye-Level, 591⁄4"h 250-680D40 251-680D40 * 21"h(G) Eye-Level, 591⁄4"h 250-680D32 251-680D32 * 27"h(H) Eye-Level, 591⁄4"h 250-680D18 251-680D18 * 38"h(I) Counter, 441⁄4"h 250-490D21 251-490D21 * 21"h
*Order drawers separately. See information to the right.
(E) Corner Cabinets• 281⁄4" square.• Base shelf supplied.• Order shelves separately.• 3 shelf positions available.• Doors keyed alike.
240-490CC - 441⁄4" counter high240-680CC - 591⁄4" eye level240-305CC - shelf
(D) Shelf Cabinets with DoorsTo order cabinets with doors, addsuffix D to the catalog numbers inthe table below. Doors include two-point keylock and recessedplastic handle. 240-DLK-(addcabinet catalog number) ie 240DLK 270 for removing lock onswinging door. See chart below.
A
B
C
D E
How To Order Drawers forModular Drawer CabinetsWithout Drawers:Simply add up the catalog numbers of thedrawers to equal the number displayed.EXAMPLE:
Five No. 25✖*-40 drawers = 200Two No. 25✖*-60 drawers = 120One No. 25✖*-80 drawers = 80
Style “F” Cabinets =250-680D40 or 251-680D40 = 400
TABL
E OF
POI
NTVA
LUES CATALOG POINT USABLE
NUMBER VALUE HEIGHT
25✖*-40 40 21⁄4"25✖*-50 50 3"25✖*-60 60 37⁄8"25✖*-70 70 45⁄8"25✖*-80 80 53⁄8"25✖*-90 90 61⁄4"25✖*-100 100 7"25✖*-110 110 73⁄4"25✖*-120 120 81⁄2"25✖*-130 130 93⁄8"25✖*-140 140 101⁄8"25✖*-150 150 107⁄8"25✖*-160 160 113⁄4"25✖*-170 170 121⁄2"25✖*-180 180 131⁄4"
COLOR INFORMATION
*IMPORTANT: You mustspecify: A. Single draweraccess (unopeneddrawers are locked inplace when one drawer is pulled out) by replacingthe ✖ with a 0 (250); orB. Multiple drawer access(multiple drawers in thesame cabinet may beopened simultaneously)by replacing the ✖ with a 1 (251).
Mobile Workstations
Shown with Steel Top
Tools not included.
Shown withLaminatedHardwood Top
10-Drawer CabinetIncludes 10 drawers, and 24"h steelpeg rack for more tool storage. Includesback & end stops on steel top. Locksincluded, keyed alike.Steel top, 45" x 28" x 3/4"No. 250-350-XRS–Single Drawer AccessNo. 251-350-XRS–Multiple Drawer Access
Laminated hardwood top, 45" x 28" x 13⁄4"No. 250-350-XRW–Single Drawer AccessNo. 251-350-XRW–Multiple Drawer AccessOptions: See below
Pre-Engineered Cabinet Work CentersWorkshops on wheels with large 45"w x 281⁄4"d work surface. Steel topsare sturdy enough to accept vise-mount. Full extension drawers deliverpayload capacity of 400 lbs. per drawer. Patented Safetylink interlock,which prevents accidental tipping, standard. Four 6-inch heavy-dutycasters, 2 with footbrakes included.
Mod
ular
Dra
wer
Cab
inet
sM
odul
ar D
raw
er C
abin
ets
No. 250-350G – Single Drawer AccessNo. 251-350G – Multiple Drawer Access
Welded mainframe cabinetwith full lengthpiano-hinge lockbar, heavy-dutyhandle, steelreinforced sides,and 12-gaugesteel drawerfronts. Latchin/latch outlocking systemson all drawers.Heavy-duty 6"casters, 2 withfootbrakes. Samebasic features asstandardModular DrawerCabinets.
MobileToolCabinet
Deluxe Computer Workstation• Pull-out keyboard shelf and printer shelf.• Rear access door 531⁄2"H x 121⁄2"W opens
completely. • Full lockbar (padlock
not included).• Adjustable lower
section for CPU, printer or supplies.
• Flush pull handle onrear access door withmagnetic clasp.
• A power strip is locatedinside the cabinet withpower cord access atthe rear of the cabinet.
• Top and bottom shelf -400 lbs. Rollout shelf and keyboard - 100 lbs.
• Overall cabinet is:30"w x 281⁄4"d x 591⁄4"h.
With Rear Access DoorNo. 250-680-PCSRD with forklift baseNo. 250-680-PCMRD with mobile base
Without Rear Access DoorNo. 250-680-PCS with forklift baseNo. 250-680-PCM with mobile base
TABL
E OF
USA
BLE
HEIG
HTS DRAWER USABLE
NUMBER HEIGHT
#40 21⁄4"#50 3"#60 37⁄8"#70 45⁄8"#80 53⁄8"#90 61⁄4"#100 7"#110 73⁄4"#120 81⁄2"#130 93⁄8"#140 101⁄8"#150 107⁄8"#160 113⁄4"#170 121⁄2"#180 131⁄4"
Dove GrayAdd prefix D to Cat. No.
PuttyAdd prefix P to Cat. No.
Wedgewood BlueAdd prefix B to Cat. No.
Cardinal RedAdd prefix H to Cat. No.
Forest GreenAdd prefix J to Cat. No.
BlackAdd prefix K to Cat. No.
DRAWERNUMBER
DRAWERNUMBER
DRAWERNUMBER
#40
#40
#40
#70
#80
#80
#50
#60
#80
#80
#80
#50
#60
#80
#80
#80
65
COLOR INFORMATION
5-Drawer Mobile CabinetLockable compartment with one shelf.Includes back & end stops on steel top.Drawer & doors keyed alike.Steel top, 45" x 28" x 3/4"No. 250-350-XJS–Single Drawer AccessNo. 251-350-XJS–Multiple Drawer Access
Laminated hardwood top, 45" x 28" x 13⁄4"No. 250-350-XJW–Single Drawer AccessNo. 251-350-XJW–Multiple Drawer Access
Design your cabinet work center to fit YOUR needs! Choose yourfavorite top and select a drawer combination to equal 350 points (per opening).
240-253XWS –Steel Retainer Top Kit
240-251XWS –Laminated Hard-wood Top Kit
240-250XWS –Black RibbedRubber Mat
240-254X – SteelPegboard Kit, 24"H
250-350XJ – Single Drawer Access251-350XJ – Multiple Drawer Access
250-350XR – Single Drawer Access251-350XR – Multiple Drawer Access
Options
TABL
E OF
POI
NTVA
LUES CATALOG POINT
NUMBER VALUE
25✖*-40SL 4025✖*-50SL 5025✖*-60SL 6025✖*-70SL 7025✖*-80SL 8025✖*-90SL 9025✖*-100SL 10025✖*-110SL 11025✖*-120SL 12025✖*-130SL 13025✖*-140SL 14025✖*-150SL 15025✖*-160SL 16025✖*-170SL 17025✖*-180SL 180
*IMPORTANT: Youmust specify: A. Singledrawer access(unopened drawers arelocked in place whenone drawer is pulledout) by replacing the ✖with a 0 (250); or B. Multiple draweraccess (multipledrawers in the samecabinet may be openedsimultaneously) byreplacing the ✖ with a 1 (251).
Custom-Designed Cabinet Work Centers
66
Mod
ular
Dra
wer
Cab
inet
sM
odul
ar D
raw
er C
abin
ets
Modular Drawers/Shelving Sections
50
50
50
50
50
4050
80
80
404040404050
60
80
110
Choose Pre-Engineered Units for Typical Applications
• Pre-engineered stand alone starterunits or assemble in rows with add-onunits.
• Add partitions and dividers to increasestorage density within each drawer.
STARTER:
ADD-ON:
Drawers
Shelves
Support Frames
fivesixone - 18"
86000SH86000H
foursixone - 18"
86002SH86002H
sixsixone - 18"
86004SH86004H
threesixone - 18"
86005SH86005H
Sup
Modular Drawers in Shelving – Small Parts & Bulk Storage In One Unit!
Lyon Platinum Series modulardrawers combined with Lyon 8000Series shelving sections offer theperfect solution for storing smallparts and bulky items in self-contained configurations.
• Drawers easily compartmentalizedwith partitions and dividers (seepages 56-57, 62). Lyon highcapacity shelves are adjustable on11⁄2" centers.
• All drawers feature payloadcapacity of 400 lbs. per drawer,extend for full visual and physicalaccess.
Starter Add-OnTA
BLE
OF U
SABL
E HE
IGHT
S DRAWER USABLENUMBER HEIGHT
#40 21⁄4"#50 3"#60 37⁄8"#70 45⁄8"#80 53⁄8"#90 61⁄4"#100 7"#110 73⁄4"#120 81⁄2"#130 93⁄8"#140 101⁄8"#150 107⁄8"#160 113⁄4"#170 121⁄2"#180 131⁄4"
Shelving System is 30"W x 30"D x 84"H
67
Mod
ular
Dra
wer
Cab
inet
sM
odul
ar D
raw
er C
abin
ets
40
80
404040404040404040
4040
60
60
80
80
120
404040
60
60
80
80
80
60
60
90
90
90
90
50
50
80
80
160
50
50
50
80
80
Custom Design UnitsUsing ComponentsCombine Lyon 30"w x 30"d high-capacity “Box W” shelving withstandard size Platinum Seriesmodular drawers to create specialsections of your own design.
STARTER:
ADD-ON:
Drawers
Shelves
pport Frames
sevenfiveone - 36"
86008SH86008H
eightfiveone - 36"
86010SH86010H
sixfiveone - 36"
86012SH86012H
thirteenfiveone - 18" & 36"
86014SH86014H
tenfiveone - 18" & 36"
86016SH86016H
elevenfiveone - 36"
86006SH86006H
Closed Open
50
5050
80
80
80
90
404040404050
How To Order Drawersfor 30" Wide Shelving:Drawer configurations are deter-mined by adding up the catalognumbers of the drawers to equalthe last 3 digits of the DrawerGuide SupportEXAMPLE:
3 No. 890-040 drawers = 1201 No. 890-060 drawer = 601 No. 890-070 drawer = 70
250No. 890-250 Drawer Guide Support
Cat. No. Description SizeClosed
8886 Closed Upright Assembly (2 required per starter section)* 30"D x 84"H8648 Closed Shelving Back (1 required per section) 30"D x 84"H
Open8841 Open Upright Assembly (2 required per starter section)* 30"D x 84"H8790 Open Upright Back Brace (1 required per section)
Shelves8593H Shelves 30"W x 30"D (minimum 4 per section required)Note: Shelves required immediately above and below modular drawer frame.
* Only 1 required per add-on section
Cat. No. Description SizeDrawer Guide Supports
890-250 Drawer Guide Support 30"W x 18"H890-480 Drawer Guide Support 30"W x 36"H
Drawer UseableCat. No. Description Front Height Drawer Height
Platinum Series Modular Drawers890-040 Modular Drawer for 30"W Shelving 31⁄16" 21⁄4"890-050 Modular Drawer for 30"W Shelving 37⁄8" 3"890-060 Modular Drawer for 30"W Shelving 45⁄16" 37⁄8"890-070 Modular Drawer for 30"W Shelving 57⁄16" 45⁄8"890-080 Modular Drawer for 30"W Shelving 63⁄16" 53⁄8"890-090 Modular Drawer for 30"W Shelving 7" 61⁄4"890-100 Modular Drawer for 30"W Shelving 73⁄4" 7"890-110 Modular Drawer for 30"W Shelving 89⁄16" 73⁄4"890-120 Modular Drawer for 30"W Shelving 93⁄8" 81⁄2"890-130 Modular Drawer for 30"W Shelving 101⁄4" 93⁄8"890-140 Modular Drawer for 30"W Shelving 107⁄8" 101⁄8"890-150 Modular Drawer for 30"W Shelving 113⁄4" 107⁄8"890-160 Modular Drawer for 30"W Shelving 121⁄2" 113⁄4"890-170 Modular Drawer for 30"W Shelving 1315⁄16" 121⁄2"890-180 Modular Drawer for 30"W Shelving 141⁄16" 131⁄4"
Select open or closed style shelving.
Select the drawer guide support(s) desired, depending whetheryou want a short stack of drawers (18"h) or a tall stack (36"h) ora combination.
Select the number of drawers desired. (Must equal last threedigits of drawer guide support per example at left.)
1
2
3
68
Mod
ular
Dra
wer
Cab
inet
sM
odul
ar D
raw
er C
abin
ets
Modular Drawer WorkstationsSlenderline Modular Drawer Cabinets
Layout Kits8 8
11
7
10
11
12
8
8
8
8
11
Adjustable Footrest
Panel Leg
Modular Drawer Workstation ComponentsBuild your own desk high or bench high workstations with your choice ofthe components listed below—added to your selection of modular drawercabinets.
No. 240-851 – Bench-High Panel Leg, 241⁄2"d x 339⁄32"hNo. 240-852 – Desk-High Panel Leg, 241⁄2"d x 2663⁄64"hNo. 240-853 – Adjustable Footrest, adjustable 27" to 461⁄4"No. 240-860 – Kit for Attaching Steel Top to Modular Drawer cabinet 28"dNo. 2705 – Plastic Laminate Top with 180° Soft Edge, 60"w x 28"d x 15⁄8"hNo. 2707 – Plastic Laminate Top with 180° Soft Edge, 72"w x 28"d x 15⁄8"hNo. 2717 – Laminated Hardwood Top, 60"w x 28"dNo. 2719 – Laminated Hardwood Top, 72"w x 28"dNo. 2741 – Super Comp Top, 60"w x 28"dNo. 2743 – Super Comp Top, 72"w x 28"dNo. 2751 – Soft-edged Laminated Hardwood Top, 60"w x 28"dNo. 2753 – Soft-edged Laminated Hardwood Top, 72"w x 28"dNo. 2767 – Steel Top, 60"w x 28"dNo. 2769 – Steel Top, 72"w x 28"d
Design your modular drawer workstation to fit YOUR needs! Combine theversatility and strength of Lyon Modular Drawer Cabinets with your choiceof tops to create heavy duty workstations. Build your workstation fromcomponents, or pick one of the pre-engineered units on the opposite page.
To specify color(s) forLyon Modular DrawerCabinets TWO PREFIX LETTERSmust be added to thecatalog number. Thefirst letter identifiesthe CABINET COLOR,while the secondletter identifies theDRAWER COLOR.Example: BP 251-815designates aWedgewood Blue (B)cabinet with Putty (P)drawers.
Dove GrayAdd prefix D to Cat. No.
PuttyAdd prefix P to Cat. No.
Wedgewood BlueAdd prefix B to Cat. No.
Cardinal RedAdd prefix H to Cat. No.
Forest GreenAdd prefix J to Cat. No.
BlackAdd prefix K to Cat. No.
COLOR INFORMATION, choose from the following
Drawers extend fully to easily reach stored items.
Custom-Designed Modular Drawer Workstations
Perfect for workstations (as shownleft) or as narrower, freestandingunits. Same features as 30" widecabinets, but only 2213⁄16" wide. Slenderline Cabinets (No drawers)**Desk high, 267⁄8"hNo. 25✖*-270SL
Table high, 301⁄8"hNo. 25✖*-310SL
Bench high, 331⁄4"hNo. 25✖*-350SL
Mid-Range height, 371⁄4"hNo. 25✖*-400SL
Counter high, 441⁄4"hNo. 25✖*-490SL
Eye Level high, 591⁄4"h No. 25✖*-680SL**See page 47 to order drawers, adding SL to Catalog No. Example: 250-40SL or 251-40SL
Slenderline Cabinets (With drawers)***With 3 drawersNo. 25✖*-270SLA
With 5 drawersNo. 25✖*-270SLB
With 4 drawersNo. 25✖*-350SLA
With 5 drawersNo. 25✖*-350SLB***See 251-270, 251-350 A and B for drawer
configurations on pages 54-55.
*IMPORTANT: You must specify: A. Singledrawer access (unopened drawers are lockedin place when one drawer is pulled out) byreplacing the ✖ with a 0 (250); or B. Multipledrawer access (multiple drawers in the samecabinet may be opened simultaneously) byreplacing the ✖ with a 1 (251).
Order layout kits separately, below.
(CSL)9 compartments51⁄8"w x 71⁄2"d to57⁄8"w x 91⁄8"dCat. No. Drawers240-C45SL 40 & 50240-C67SL 60 & 70240-C89SL 80 & 90240-C100SL 100+
(DSL)4 compartments91⁄8"w x 57⁄8"d,4 compartments81⁄4"w x 57⁄8"dCat. No. Drawers240-D45SL 40 & 50240-D67SL 60 & 70240-D89SL 80 & 90240-D100SL 100+
69
Mod
ular
Dra
wer
Cab
inet
sM
odul
ar D
raw
er C
abin
ets
Pre-Engineered for Easy Ordering!Bench High (35"H) Selections
Desk High (283/4"H) Selections
All workstations have multiple drawer access
W x D Steel Top Plastic Laminate Top Lam. Hdwd. Top Super Comp Top
(A) Includes: One 251-350A Cabinet, one top, one panel leg, one footrest.60" x 28" 251-815 251-816 251-817 251-81872" x 28" 251-819 251-820 251-821 251-822
(B) Includes: One 251-350B Cabinet, one top, one panel leg, one footrest.60" x 28" 251-823 251-824 251-825 251-82672" x 28" 251-827 251-828 251-829 251-830
(C) Includes: One 251-350SLA Cabinet, one top, one panel leg, one footrest.60" x 28" 251-831 251-832 251-833 251-83472" x 28" 251-835 251-836 251-837 251-838
(D) Includes: One 251-350SLB Cabinet, one top, one panel leg, one footrest.60" x 28" 251-839 251-840 251-841 251-84272" x 28" 251-843 251-844 251-845 251-846
(E) Includes: Two 251-350SLB Cabinets, one top.72" x 28" 251-861 251-862 251-863 251-864
(F) Includes: Two 251-350SLB Cabinets, two tops, one panel leg, two footrests.60" x 28" 251-869 251-870 251-871 251-87272" x 28" 251-873 251-874 251-875 251-876
(G) Includes: One 251-350A Cabinet, Two 251-350SLB Cabinets, two tops, two footrests.72" x 28" 251-877 251-878 251-879 251-880
SOFT FRONT EDGE
All workstations have multiple drawer access
W x D Steel Top Plastic Laminate Top Lam. Hdwd. Top Super Comp Top
(H) Includes: One 251-270B Cabinet, one top, one panel leg, one footrest.72" x 28" 251-881 251-882 251-883 251-884
(I) Includes: Two 251-270SLB Cabinets, one top.72" x 28" 251-885 251-886 251-887 251-888
SOFT FRONT EDGE
(A)
(B)
(C)
(D)
(E)
(F)
(G)
(H)
(I)
To specify color(s) for Lyon Modular DrawerCabinets TWO PREFIX LETTERS must be addedto the catalog number. The first letter identifiesthe CABINET COLOR, while the second letteridentifies the DRAWER COLOR. Example: BP251-815 designates a Wedgewood Blue (B)cabinet with Putty (P) drawers.
Dove GrayAdd prefix D to Cat. No.
PuttyAdd prefix P to Cat. No.
Wedgewood BlueAdd prefix B to Cat. No.
Cardinal RedAdd prefix H to Cat. No.
Forest GreenAdd prefix J to Cat. No.
BlackAdd prefix K to Cat. No.
COLOR INFORMATION choose from the following
70
Mod
ular
Dra
wer
Cab
inet
sM
odul
ar D
raw
er C
abin
ets
Sky-Wal II™ for Modular Drawer Workstations
Pre-engineered Sky-Wal II™ Units for Modular Drawer Workstations
Sky-Wal II™ FramePackagesAttach to Lyon ModularDrawer Workstations toaccommodate Sky-Wal II™Componenets on page 71.All hardware included.No. 79321 — 60" wideNo. 79322 — 72" wide
NOTE: Catalog numbers shown are for frame or frame packages only and do NOT include modular drawer workstations.
Now, combine the ergonomic features of Lyon Sky-Wal II™components with the versatility and convenience of Modular DrawerWorkstations. Choose from three pre-engineered Sky-Wal II™ unitswith different Modular Drawer Workstation configurations to creatework areas ideally suited to your operations and workers.
Some components included are: • Tool trolleys that roll across the full width of each work station,
putting tools within easy reach.• Light fixtures to illuminate the entire work surface evenly.• Adjustable shelves with shelf lips that allow four different positions
(12°up, even, 15°down and 30°down) to hold tools, manuals,instruments and other items at different angles.
• Tote bars, providing clip rails for removable plastic bins that hold avariety of parts and other articles (plastic bins won’t rust, rot orcorrode and resist most solvents).
• Chrome finished wire shelf fences that allowupright storage of reference materials along thelength or width of shelves.
• Electrical Raceways provide a convenient 6-outlet, power source at the work surface.
• Document Storage Cabinets deliver a generous,lockable storage area above the work surface.
Unless otherwise noted, all
Sky-Wal II™ components available in
Wedgewood Blue.
Wedgewood BlueAll steel componentsAdd prefix BB to Cat. No.
instock
COLOR INFORMATIONThese items only available in:
Sky-Wal II™ Unitswith Shelves, Bins, ElectricalRaceway & Storage Cabinet• Upright frame assembly.• Mounting arms.• Light fixture assembly.• Tool hanger assembly. • Two 12"d shelves withlip inserts.
• Six 12"d wire shelf fences.• Two 11⁄2" proj. tote bars. • Electrical raceway.• Lockable storage cabinet.No. 79434 — 60" wide.•Three 4" x 4" x 2" plastic bins. • Three 4" x 61⁄2" x 3" plastic bins. • Four 6" x 91⁄2" x 5" plastic bins.No. 79435 — 72" wide.• Four 4" x 4" x 2" plastic bins.• Five 4" x 61⁄2" x 3" plastic bins.• Six 6" x 91⁄2" x 5" plastic bins.
Sky-Wal II™ Unitswith Shelves, Bins &Electrical Raceway• Upright frame assembly.• Mounting arms.• Light fixture assembly. • Tool hanger assembly. • Two 12"d shelves withlip inserts.
• Six 12"d wire shelf fences. • Two 41⁄2" proj. tote bars.• Electrical raceway. No. 79432 — 60" wide.•Three 4" x 4" x 2" plastic bins.•Three 4" x 61⁄2" x 3" plastic bins.• Four 6" x 91⁄2" x 5" plastic bins.No. 79433 — 72" wide.• Four 4" x 4" x 2" plastic bins.• Five 4" x 61⁄2" x 3" plastic bins.• Six 6" x 91⁄2" x 5" plastic bins.
Sky-Wal II™ Unitswith Shelves & Bins• Upright frame assembly.• Mounting arms.• Light fixture assembly. • Tool hanger assembly. • Two 12"d shelves withlip inserts.
• Six 12"d wire shelf fences. • Two 11⁄2" proj. tote bars. No. 79430 — 60" wide• Three 4" x 4" x 2" plastic bins.• Three 4" x 61⁄2" x 3" plastic bins.• Four 6" x 91⁄2" x 5" plastic bins.No. 79431— 72" wide• Four 4" x 4" x 2" plastic bins.• Five 4" x 61⁄2" x 3" plastic bins.• Six 6" x 91⁄2" x 5" plastic bins.
Tool Trolley(A) No. 79312Fits on Tool Header Bar (above)to put tools within easy reach,rolls across entire width ofworkbench.Air Tool Balancer(B) No. 79313Use with tool trolley. 3-5 lb. capacity.
Mounting ArmsRequired for hanging lightfixture assembly and toolbar assembly on uprightframe assembly.No. 79305
Tool Hanger AssemblyIncludes one tool trolley.No. 7931060" Tool Hanger AssemblyNo. 7931172" Tool Hanger Assembly
Header BarFor hanging light fixture ortool trolley.No. 7930760" Header BarNo. 7930872" Header Bar
Plastic BinsClip on Tote Bars to load, storeand access small parts. Won’trust, rot or corrode. Resistsmost solvents. Blue only.No. 782034"w x 4"d x 2"h BinsNo. 7820641⁄8"w x 71⁄4"d x 3"h BinsNo. 7820957⁄8"w x 111⁄8"d x 5"h Bins
Tote Bar AccessoriesMount on Tote Bars shown above right.(A) No. 79390 - Bottle Flux Holder(B) No. 79391 - Spool Holder
PC Arm AssemblyIncludes base mount, swing arm,swivel tray and keyboard tray.One assembly fits 60"w and 72"wide frame assembly.No. KK79388Optional mouse tray attachesto keyboard tray.No. KK79337
Textured Finish Panel InsertsTwo panels included for 60"w or 72"wframes.No. 79360W-230" Painted Panel InsertsNo. 79361W-236" Painted Panel Inserts
Electrical RacewaysIncludes 15-20 amp switch breaker, 6single outlets, base, back panel and cordwith 15 amp grounded plug.No. 7935030" Electrical Raceway for 60" wide frameNo. 7935136" Electrical Raceway for 72" wide frame
Lockable DocumentStorage CabinetsBig 15"d x 15"h metal cabinetsprovide generous storage areaabove work surface. Deviceinside secures unit to upright.Two keys included. Capacity: 50 lbs.No. 7938530" Document Storage Cabinetfor 60" wide frameNo. 7938636" Document Storage Cabinetfor 72" wide frame
Cloth-Covered PanelsTackable nylon covered core board or 1⁄4"hardboard, finished on one side. Twopanels included for 60"w or 72"w frames.
30"w for 36"w for60"w frames 72"w frames No. 79360C-2 No. 79361C-2
Adjustable ShelvesShelf design allows 4 mounting positions:12° up, level,15°down and 30° down.Capacity: 250 lbs.
30"w for 36"w for60"w frames 72"w frames 12" Shelf DepthNo. 79370-2 No.79371-2
14" Shelf DepthNo. 79373-2 No.79374-2
18" Shelf DepthNo. 79376-2 No.79377-2
Lip InsertsAll are 1" high to holdmanuals, etc. when shelvesare tilted down.No. 79380-230" Lip InsertsNo. 79381-236" Lip Inserts
Tote BarsProvide anchors for plastic bins,solder holders and otheraccessories. Mount quickly atany convenient height.No. 79364-211⁄2"d x 30" Projection Tote BarsNo. 79365-211⁄2"d x 36" Projection Tote BarsNo. 79367-241⁄2"d x 30" Projection Tote BarsNo. 79368-241⁄2"d x 36" Projection Tote Bars
Wire Shelf FencesMount along length or width ofshelves to support books, etc.Chrome finish.No. 79345-612"d Wire Fences
(A) (B)
(B)
71
Mod
ular
Dra
wer
Cab
inet
sM
odul
ar D
raw
er C
abin
ets
Sky-Wal II™ Components
Light Fixture AssemblyIncludes light fixture andheader bar.No. 7902560" Light Fixture AssemblyNo. 7902972" Light Fixture Assembly
Light Fixture OnlyCord length 7 feet. Lt. Grayonly. (Florescent lights notincluded.) No. 79020
(A)
NC/CNC Tool Transporters
Choose from Two Pre-Engineered Tool Transport Units
WorkShelf
#4101
FixedAngled
Tray#4103
Portable 6-Pocket Trays
#4104
Fixed Flat Tray#4102
Work Shelf#4101
Portable 6-Pocket Trays#4104
72
Lyon NC/CNC tool transporters are a safe, efficientmethod of transporting valuable tools from toolrooms tomachining centers and back. We offer pre-engineeredmodels or you can begin with a basic cart and design amodel to meet your specific needs.
Either way, Lyon tool holders and trays are safely andeasily transferred between Lyon storage drawers andmachining centers via these heavy duty tool transporters.
CHECK OUT THESE IMPORTANT FEATURES:• 1200 lb. load-carrying capacity• 5" diameter, 2" wide polyurethane casters
(2 swivel with brakes, 2 fixed)• 16 ga. sides are punched on 1" centers for
maximum adjustability• Heavy duty, 12 ga. base. Tubular steel handle• Auxiliary work shelf is 233⁄4"w x 103⁄8"d with 15⁄16" lip
and rubber mat• Black baked-on enamel finish
Tool Holder Selection Guide
Tool Holder
Cat. No. Tool Holder No. Req. / Row Cat. No. Tool Holder No. Req. / Row Cat. No. Tool Holder No. Req. / Row
4105 #50 taper tool 5 4108 #35 taper tool 6 4116 13⁄4" straight shank 64106 #45 taper tool 6 4109 #30 taper tool 6 4117 2" straight shank 64107 #40 taper tool 6 4115 11⁄2" straight shank 6 4118 21⁄4" straight shank 6
4119 21⁄2" straight shank 6
(A) No. 4110*Includes one 24-pocket flat tray, one 24-pocket angledtray and one work shelf. 261⁄2"W x 235⁄8"d x 385⁄8H (add 5"to width for handle). Includes casters.
* IMPORTANT: Tool holders are not included – Must be ordered from selection guide below.
(B) No. 4112*Includes eight portable tool trays and onework shelf. 261⁄2"W x 235⁄8"d x 385⁄8H (add 5" towidth for handle). Includes casters.
To Design Your Own Tool Transporter, Follow These Simple Steps:
1 2 3Select tool trays (and optional shelf) from list below (pictured above and/or below):
4101 – Work Shelf – 233⁄4 x 103⁄84102 – Fixed Flat Tray – 24 Pockets4103 – Fixed Angled Tray – 24 Pockets4104 – Portable 6-Pocket Tool Tray with drop handles
(holds 5 #50 Taper Tool Holders; 6 each inother sizes) – 231⁄4 x 45⁄8
Specify partnumber(s) forthe tool holdersize(s) yourequire from theTool HolderSelection Guideabove.
Begin with thebasic Lyon CNCtool transporter.No. 4100
4100
4102 4103
4104
Mod
ular
Dra
wer
Cab
inet
sM
odul
ar D
raw
er C
abin
ets