LOCHER - Cuisinequip Price... · 121-123 Accessories 850: 124-127 Doors: 128: Table of Contents: Professional Chef Series: Page: Table Top Induction Cooker 129-131 & 133: Table Top

Price List 2018

LOCHERCommercial Kitchen Appliances for Professionals

2 Subject to technical changes and deviations without notice 2

LOCHER

www.cuisinequip.com

600 Professional

Stoves Page

Gas 6-7

Infrared 8-11

Induction 12

Wok 13

Griddles

Steel 14-16

Chrome-plated 17-19

Steak Grill Rustica 20-21

Bratt Pans 22-23

Deep Fryers 24-25

Chip scuttle 26

Cookers 27

Bain-Marie 27

Pasta Cookers 28-29

Accessories 30

Heating Cabinet 30

Compartments 31

Doors 32

700 Professional

Stoves Page

Gas 34-40

Infrared 41-49

Induction 50-56

Wok 57

Griddles

Steel 58-60

Chrome-plated 61-63

Bratt Pans 64-65

Multi purpose bratt pans 66

Multi cooking device 67


Deep Fryers 70-71

Chip scuttle 72

Fryer Accessories 73

Cookers 74

Pasta Cookers 74-77

Bain-Marie 78-80

Junction system 81

Stand 700 Accessories 82-83

Lever mixer 84

Accessories 84-85

Doors 86

Table of Contents

3Price list in £ excluding VAT 3

LOCHER

Tel: +44 (0)118 957 1344

850 Professional

Stoves Page

Gas 88-94

Induction 95-100

Wok 101

Griddles

Steel 102-104

Chrome-plated 105-107

Bratt Pans 108-110

Multi purpose bratt pan 110

Junction system 111


Deep Fryers 114-117

Pasta Cookers 118-120

Bain-Marie 121-123

Accessories 850 124-127

Doors 128

Table of Contents

Professional Chef Series

Page

Table Top Induction Cooker 129-131 & 133

Table Top Induction Wok Cooker 131-133

Electric & Induction Stock Pot 134

Gas Stock Pot 135

Hot Star 136

Heating lamps 137

Table Top Griddle Chrome 138-139

Teppanyaki Grill 140-141

Table Top Bratt Pan 141

Table Top Griddle Stainless Steel 142-143

Contact Grill 144-146

Table Top Pasta Cooker 147

Salamander 148-149

Convection Ovens 150-151

Baking Trays 152-153

Pizza Ovens 154-158

Dough Sheeting Machine 159


LOCHER

www.cuisinequip.com


LOCHER

Tel: +44 (0)118 957 1344

600 Professional

The appliances of the Flex 600 series, with their small installation depth of 600 mm, have been functionally designed with the real needs of the professional kitchen in mind.

They are characterised by the following:

• High reliability, stability, functionality• Modular program offering a wide variety of table top units, free standing

appliances with ovens as well as compartments in different widths• The appliances can be joined through a rounded clamping bar• High performance with low space requirement• Available in electric or gas• Compartments suitable for mounting on hollow or solid bases• Best energy utilisation, easy to clean, practical functionality


LOCHER

www.cuisinequip.com

Gas stove, 2 cooking zones- --

---

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Deep moulded hob (approx. 65 mm), easy to cleanPilot flame burner with pilot flameChrome-plated sliding grid over 2 cooking zones

Ext. dimensions: W. 400 x D. 600 x H. 230 / 255 mm incl. feetFront 'C' burner: 3.5 kW single crown Back 'D' burner: 5.5 kW dual crownNominal heat output: 9.0 kW gas, set to natural gas H (G20)Item No. 206001Price 1790.-

Gas stove, 4 cooking zones- -- ---

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Deep moulded hob (approx. 65 mm), easy to cleanPilot flame burner with pilot flame2 chrome-plated sliding grids over 2 cooking zones each

Ext. dimensions: W. 800 x D. 600 x H. 230 / 255 mm incl. feetFront 'C' burner: 2 x 3.5 kW single crown Back 'D' burner: 2 x 5.5 kW dual crownNominal heat output: 18.0 kW gas, set to natural gas H (G20)Item No. 206002Price 2590.-

Gas stove, 4 cooking zones and multifunctional electric oven GN 1/1- -- ---- --

--

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Deep moulded hob (approx. 65 mm), easy to cleanPilot flame burner with pilot flame2 chrome-plated sliding grids over 2 cooking zones eachMultifunctional electric oven with 8 functionsTop / bottom heat, bottom heat, top heat, grill, fan top/bottom heat, hot air, defrosting and cooling downOptimal temperature control from 50°-270°CBaking chamber with interior light with removable baking tray support, for optimal and easy cleaningGlass door with integrated venting flapCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: 1 oven rack

Ext. dimensions: W. 800 x D. 600 x H. 850/900 mm Front 'C' burner: 2 x 3.5 kW (single crown)Back 'D' burner: 2 x 5.5 kW (double crown)Nominal heat output: 18.0 kW gas, set to natural gas H (G20)Oven connection value: 3.3 kW / 230 V electricalItem No. 206003Price 3890.-

Gas600 Professional

600

Prof

essi

onal


LOCHER

Tel: +44 (0)118 957 1344

Accessories600 Professional

600

Prof

essi

onal

Clamping bar 600- -

Material: Stainless steel CNS 18/10Fixing through small screws

Dim.: Length 600 mm, Ø 14 mmItem No. 206999Price 75,-

Solid top plate 602 Gas- -

Material: Steel FE 510, 8 mm thicknessCovers 2 zones at once

Dim: 550 x 330 mmWeight: 7 kgItem No. 206021Price 399,-

Oven grid GN 1/1- -

Material: Chrome-plated steelFits all GN 1/1 ovens

Dim.: 530 x 325 mmWeight: 1,4 kgItem No. 206850Price 69,-

Baking tray GN 1/1- -

Material: AluminumFits all GN 1/1 ovens

Dim.: 530 x 325 mmWeight: 1,4 kgItem No. 206851Price 16,-

Wok Ring- --

Material: CNS 18/10Fits all gas sliding gridsFor wok pans with diameter Ø 360 and Ø 390 mm

Dim: Ø 250 x 45 / 60 mmItem No. 209100Price 195,-


LOCHER

www.cuisinequip.com

Infrared cooktop

600

Prof

essi

onal

Electric stove, 4 cooking zones, 3 kW each and multifunctional electric oven- -- -----

-- --

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installationStepless power control with energy regulatorOverheat protection and main switch with signal lampResidual heat display under ceran glassMultifunctional electric oven with 8 functionsTop / bottom heat, bottom heat, top heat, grill, fan top/bottom heat, hot air, defrosting and cooling downOptimal temperature control from 50°-270°CBaking chamber with interior light with removable baking tray support, for optimal and easy cleaningGlass door with integrated venting flapCan be installed on a base (incl. solid base) by removingthe height-adjustable feetIncluded accessories: 1 ceran glass scraper and 1 oven rack

Ext. dimensions: W. 600 x D. 600 x H. 850/900 mm incl. feetInfrared cooktop: 4 x round Ø 230 mm, 3.0 kW each Ceran glass: 550 x 560 mm, thickness 4 mmConnection value: 15.3 kW / 400 VItem No. 206308 Price 3990.-

Electric stove, 4 cooking zones, 3 kW each,Infrared cooktop with electronic pot detection and multifunctional electric oven- -- -----

-- --

-


Ext. dimensions: W. 600 x D. 600 x H. 850/900 mm incl. feetInfrared cooktop: 4 x round Ø 230 mm, 3.0 kW eachwith electronic pot detection Ceran glass: 550 x 560 mm, thickness 4 mmConnection value: 15.3 kW / 400 VItem No. 206309Price 4990.-

600 Professional


LOCHER

Tel: +44 (0)118 957 1344

600 Professional

Electric stove, 4 cooking zones, 3 kW each and multifunctional electric oven GN 1/1- -- -----

- -

--

-


Ext. dimensions: W. 800 x D. 600 x H. 850/900 mm incl. feetInfrared cooktop: 4 x round Ø 230 mm, 3.0 kW each Ceran glass: 750 x 560 mm, thickness 6 mmConnection value: 15.3 kW / 400 VItem No. 206306Price 4490.-

Electric stove, 4 cooking zones, 3 kW each,Infrared cooktop with electronic pot detection and multifunctional electric oven GN 1/1- -- ----- --

--

-


Ext. dimensions: W. 800 x D. 600 x H. 850/900 mm incl. feetInfrared cooktop: 4 x round Ø 230 mm, 3.0 kW eachwith electronic pot detection Ceran glass: 750 x 560 mm, thickness 6 mmConnection value: 15.3 kW / 400 VItem No. 206307Price 5490.-

Infrared cooktop

600

Prof

essi

onal


LOCHER

www.cuisinequip.com

Electric stove, 2 cooking zones, 3 kW each,Infrared cooktop- --

-----

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installationMain switch with signal lampStepless power control with energy regulatorResidual heat display under ceran glassIncluded accessories: 1 ceran glass scraper

Ext. dimensions: W. 400 x D. 600 x H. 230 / 255 mm incl. feetInfrared cooktop: 2 x round Ø 230 mm, 3.0 kW eachCeran glass: W. 350 x D. 560 mm, thickness 4 mmConnection value: 6.0 kW / 400 VItem No. 206300Price 1990.-

Electric stove, 2 cooking zones, 3 kW each,Infrared cooktop with electronic pot detection- --

-------

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installationMain switch with signal lampStepless power control with energy regulator Electronic pot detection Pot detection can be disabled through main switchResidual heat display under ceran glassIncluded accessories: 1 ceran glass scraper


Infrared cooktop

600

Prof

essi

onal

Large ceramic glass scraper- Diecast professional glass scraper with blade

Blade width: 100 mmWeight: 0,6 kgItem No. 209226Price 39,-

Set for cleaning and maintenance of ceramic glass- Consists of scraper (45 mm wide), cleaning fluid and cloth

Contains 125 mlWeight: 0,8 kgItem No. 209227Price 35,-

600 Professional


LOCHER

Tel: +44 (0)118 957 1344


-----

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installationMain switch with signal lampStepless power control with energy regulatorResidual heat display under ceran glassIncluded accessories: 1 ceran glass scraper


Electric stove, 4 cooking zones, 3 kW each,Infrared cooktop with electronic pot detection- --

-------

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installationMain switch with signal lampStepless power control with energy regulator Electronic pot detection Pot detection can be disabled through main switchResidual heat display under ceran glassIncluded accessories: 1 ceran glass scraper


Infrared cooktop

600

Prof

essi

onal

600 Professional


LOCHER

www.cuisinequip.com

Induction stove, 2 cooking zones, 1.8 kW each-

--

-----

Design in CNS 18/10, with integrated fans in the bottom of the appliance20 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installationMain switch and 2 stepless power controls 1-9 Pot detection / overheat protection and residual heat displayDigital display under ceran glassExchangeable aluminium grease filter (can be washed in dish washer) Included accessories: Aluminium grease filter

Ext. dimensions: W. 400 x D. 600 x H. 230 / 255 mm incl. feet2 round coils Ø 210 mm, 1.8 kW eachCeran glass: W. 350 x D. 560 mm, thickness 4 mmConnection value: 3.5 kW / 230 VItem No. 206202Price 2990.-


--

-----

Design in CNS 18/10, with integrated fans in the bottom of the appliance20 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installationMain switch and 2 stepless power controls 1-9 Pot detection / overheat protection and residual heat displayDigital display under ceran glassExchangeable aluminium grease filter (can be washed in dish washer) Included accessories: Aluminium grease filter



--

-----

Design in CNS 18/10, with integrated fans in the bottom of the appliance20 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installationMain switch and 4 Stepless power controls 1-9 Pot detection / overheat protection and residual heat displayDigital display under ceran glassExchangeable aluminium grease filter (can be washed in dish washer) Included accessories: Aluminium grease filter


Induction

600

Prof

essi

onal

600 Professional


LOCHER

Tel: +44 (0)118 957 1344

Induction wok, 5.0 kW- --

--------

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass bowl (Cuvette) flush-mounted installation from belowPot detection / overheat protectionStepless power control (1-9) Main switch with signal lamp Digital display under glass Residual heat indicator in the displayFan integrated in the bottom of the applianceExchangeable aluminium grease filter (can be washed in dish washer) Included accessories: Aluminium grease filter

Ext. dimensions: W. 400 x D. 600 x H. 230 / 255 mm incl. feet ceran glass bowl (Cuvette): Ø 300 mm Connection value: 5.0 kW / 400 VItem No. 206225Price 3350.-

Wok pan- -

Material: Stainless steel CNS 18/10Capacity 4 – 5 Liter

Dim. : Ø 390 mmWeight: 1,8 kgItem No. 209203Price 195,-

Wok pan- -

Material: Stainless steel CNS 18/10, lightweight for easy handlingCapacity 4 – 5 Liter


Wok pan- -

Material: SteelCapacity 4 – 5 Liter


Wok pan- -

Material: Stainless steel CNS 18/10, non-stickCapacity 4 – 5 Liter


Induction

600

Prof

essi

onal

600 Professional


LOCHER

www.cuisinequip.com

Griddles

600

Prof

essi

onal

Electric griddle 400Smooth steel surface- --

--- ----

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)1 heating zone with removable splash guardSmooth griddle, welded 20 mm recessed Surface made of special steel FE510, polished surface(can rust if not greased)Fat drain (125 x 35 mm) in removable grease drawerStepless temperature control through thermostatControl knob and signal lamp in the faceplateIncluded accessories: Removable splash guard,grease drawer, spatula and stainless steel cleaning spongeOptional: chrome-plated grid (375 x 180 mm) to be placed on the splash guard

Ext. dimensions: W. 400 x D. 600 x H. 230 / 255 mm incl. feetSurface: 320 x 520 mmTemperature range 60°-300°CConnection value: 4.5 kW / 400 VItem No. 206431Price 2290.-


--- ----

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional) 2 separate heating zones with removable splash guardSmooth griddle, welded 20 mm recessed Surface made of special steel FE510, polishedSurface(can rust if not greased)Fat drain (125 x 35 mm) in removable grease drawerStepless temperature control through thermostatControl knob and signal lamp in the faceplateIncluded accessories: Removable splash guard,grease drawer, spatula and stainless steel cleaning spongeOptional: chrome-plated grid (575 x 180 mm) to be placed on the splash guard


600 Professional


LOCHER

Tel: +44 (0)118 957 1344


--- ----

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional) 2 separate heating zones with removable splash guardSmooth griddle, welded 20 mm recessed Surface made of special steel FE510, polished surface(can rust if not greased)Fat drain (125 x 35 mm) in removable grease drawerStepless temperature control through thermostatControl knob and signal lamp in the faceplateIncluded accessories: Removable splash guard,grease drawer, spatula and stainless steel cleaning spongeOptional: chrome-plated grid (775 x 180 mm) to be placed on the splash guard


Griddles

600

Prof

essi

onal

600 Professional


LOCHER

www.cuisinequip.com

Electric griddle 600Steel surface, ½ grooved- --

--- ----

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)) 2 separate heating zones with removable splash guardSmooth griddle, welded 20 mm recessed Surface made of special steel FE510, polished surface(can rust if not greased)Fat drain (125 x 35 mm) in removable grease drawerStepless temperature control through thermostatControl knob and signal lamp in the faceplateIncluded accessories: Removable splash guard,grease drawer, spatula and stainless steel cleaning spongeOptional: chrome-plated grid (575 x 180 mm) to be placed on the splash guard


Griddles

600

Prof

essi

onal


--- ----

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional) 2 separate heating zones with removable splash guardSmooth griddle, welded 20 mm recessed Surface made of special steel FE510, polished surface(can rust if not greased)Fat drain (125 x 35 mm) in removable grease drawerStepless temperature control through thermostatControl knob and signal lamp in the faceplateIncluded accessories: Removable splash guard,grease drawer, spatula and stainless steel cleaning spongeOptional: chrome-plated grid (775 x 180 mm) to be placed on the splash guard


600 Professional


LOCHER

Tel: +44 (0)118 957 1344

Electric griddle 400Chrome-plated surface, smooth- --

---- ----

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)1 heating zone with removable splash guardSurface made of special steel, chrome-platedSmooth griddle, welded 20 mm recessed Aluminium block contact heater for excellent heat retentionand even temperature distributionFat drain (125 x 35 mm) in removable grease drawerStepless temperature control through thermostatControl knob and signal lamp in the faceplateIncluded accessories: Removable splash guard,grease drawer, spatula and stainless steel cleaning spongeOptional: chrome-plated grid (375 x 180 mm) to be placed on the splash guard



---- ---- -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)2 separate heating zones with removable splash guardSurface made of special steel, chrome-platedSmooth griddle, welded 20 mm recessed Aluminium block contact heater for excellent heat retentionand even temperature distributionFat drain (125 x 35 mm) in removable grease drawerStepless temperature control through thermostatControl knob and signal lamp in the faceplateIncluded accessories: Removable splash guard,grease drawer, spatula and stainless steel cleaning spongeOptional: chrome-plated grid (575 x 180 mm) to be placed on the splash guard


Griddles

600

Prof

essi

onal

600 Professional


LOCHER

www.cuisinequip.com

Griddles

600

Prof

essi

onal


---- ---- -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)2 separate heating zones with removable splash guardSurface made of special steel, chrome-platedSmooth griddle, welded 20 mm recessed Aluminium block contact heater for excellent heat retentionand even temperature distributionFat drain (125 x 35 mm) in removable grease drawerStepless temperature control through thermostatControl knob and signal lamp in the faceplateIncluded accessories: Removable splash guardGrease drawer, spatula and stainless steel cleaning spongeOptional: chrome-plated grid (775 x 180 mm) to be placed on the splash guard


Scraper for grooved griddles- Material: Blade of stainless steel CNS 18/10

Dim. : 120 x 250 mmWeight: 0,245 kgItem No. 209404Price 165,-

Spatula- Material: Stainless steel CNS 18/10


Teflon plug for fat drain 125 x 35 mm- Material: Teflon

Dim. : 135 x 45 x 55 mmWeight: 0,270 kgItem No. 209400Price 135,-

Clamping bar 600- -



600 Professional


LOCHER

Tel: +44 (0)118 957 1344

Electric griddle 600Chrome-plated surface, ½ grooved- --

---- ---- -




---- ---- -



Griddles

600

Prof

essi

onal

600 Professional


LOCHER

www.cuisinequip.com

Electric steak grill Rustica 400- --

--

-- -- -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional) Removable anti-stick cast iron grids1 heating zone with stepless temperature control through thermostatControl knob and signal lamp in the faceplateHeating elements can be completely swivelled and locked out of the fat tank (cuts off power supply) for easy cleaningFat tank with drain incl. ¾“ ball valve in faceplateFat tank can be filled with water for easier cleaning (tank depth approx. 150 mm)Included accessories: Spatula



--

- -

-- -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional) Removable anti-stick cast iron grill grids2 heating zones with stepless temperature control through thermostatControl knob and signal lamp in the faceplateHeating elements can be completely swivelled and locked out of the fat tank (cuts off power supply) for easy cleaningFat tank with drain incl. ¾“ ball valve in faceplateFat tank can be filled with water for easier cleaning (tank depth approx. 150 mm)Included accessories: Spatula


600

Prof

essi

onal

Steak Grill Rustica600 Professional


LOCHER

Tel: +44 (0)118 957 1344

Electric steak grill Rustica 400 Lava Stone- --

--

-- ---

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional) Removable anti-stick cast iron grids1 heating zone with stepless temperature control through thermostat (upper and lower heating combined)Control knob and signal lamp in the faceplateUpper heating elements can be completely swivelled and locked out (cuts off power supply)Lower heating element rigidly installed beneath the lava stonesCollecting drawer removableIncluded accessories: Lava stones and spatula



--

- -

---

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional) Removable anti-stick cast iron grill grids2 heating zones with stepless temperature control through thermostat (upper and lower heating combined)Control knob and signal lamp in the faceplateUpper heating elements can be completely swivelled and locked out (cuts off power supply)Lower heating element rigidly installed beneath the lava stonesCollecting drawer removableIncluded accessories: Lava stones and spatula


Steak Grill Rustica Lava

600

Prof

essi

onal

Lava stones- To be used with steak grill Rustica lava stone

1 Pouch Item No. 209490Price 69,-

600 Professional


LOCHER

www.cuisinequip.com

Bratt pans

600

Prof

essi

onal

Electric bratt pan 400- --

- --

- -- ---

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Surface made of special compound stainless steel, smoothly welded Inner pan height 80 mmAluminium block contact heater for excellent heat retentionand even temperature distributionRound drain tap (Ø 55 mm) with teflon plug and collection tray GN 2/3-150 mm in the compartmentCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetStepless temperature control through thermostatControl knob and signal lamp in the faceplateIncluded accessories: Teflon plug, collection trayGN 1/1-150, spatula and stainless steel cleaning spongeOptional: Removable CNS splash guard

Ext. dimensions: W. 400 x D. 600 x H. 850 / 900 mm incl. feetSurface: 340 x 540 mmTemperature range: 60°-300°CConnection value: 4.5 kW / 400 VItem No. 206471Price 3690.-


-- - - - --

---

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)2 separate heating zones Surface made of special compound stainless steel, smoothly weldedInner pan height 80 mmAluminium block contact heater for excellent heat retentionand even temperature distributionRound drain tap (Ø 55 mm) with teflon plug and collection tray GN 2/3-150 mm in the compartmentCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removingthe height-adjustable feetStepless temperature control through thermostatControl knob and signal lamp in the faceplateIncluded accessories: Teflon plug, collection trayGN 1/1-150, spatula and stainless steel cleaning spongeOptional: Removable CNS splash guard

Ext. dimensions: W. 600 x D. 600 x H. 850 / 900 mm incl. feetSurface: 540 x 540 mmTemperature range: 60°-300°CConnection value: 7.5 kW / 400 VItem No. 206472Price 4690.-

600 Professional


LOCHER

Tel: +44 (0)118 957 1344

600

Prof

essi

onal

Optionals & Accessories

Splash guard for bratt pans- -

Material: Stainless steel CNS 18/10Removable, available for width 400, 600 and 800 mm

Item No. 209450 209451 209452W of bratt pan 400 mm 600 mm 800 mmWeight in kg 2,8 3,6 4,5Price 200,- 280,- 320,-

Resting grid for splash guard- -

Material: Chrome-plated steel Removable, available for width 400, 600 and 800 mm

Item No. 209460 209461 209462W of splash g. 400 mm 600 mm 800Weight in kg 2,1 3,2 4,1Price 65,- 95,- 115,-

Wall connection element- -

Material: Stainless steel CNS 18/10Removable, suitable for appliance series Flex 600 for extending to installation depth of 650 mm

Appliance width 400 mm 600 mm 700 mm 800 mmItem No. 206994 206996 206997 206998Price 190.- 210.- 220.- 230.-

Stainless steel cleaning sponge set- consists of 2 stainless steel cleaning sponges

Dim. : Ø ca. 80 mmWeight: 0,1 kgItem No. 209403Price 5,-



Teflon plug for round drain tap for bratt pans Ø 55- Material: Teflon

Dim. : Ø 60 mm x 110 mmWeight: 0,4 kgItem No. 209401Price 145,-

600 Professional


LOCHER

www.cuisinequip.com

Deep fryers

600

Prof

essi

onal

Electric fryer, 1 basin, 1 x 12 litres- --

-- --

--

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Heating through heater inside the basinHeating elements can be completely swivelled and locked out of the basin (cuts off power supply) for easy cleaningDrain tap with ball valve in the faceplateTemperature control through thermostat with signal lamp for activated security thermostat limiterOperating knob, power and heat indicator in faceplateIncluded accessories: Basket, lid and protection grid for the heater

Ext. dimensions: W. 400 x D. 600 x H. 230 / 255 mm incl. feetTotal capacity / basin: 12 litresOperating capacity / basin: 8 litresBasket size: W. 230 x D. 280 x H. 100 mmTemperature range: 50°-185°C Connection value: 8.0 kW / 400 VItem No. 206500Price 1890.-

With reinforced heating: 10 kWItem No. 206501Price 2090.-


-- --

--

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Heating through heater inside the basinHeating elements can be completely swivelled and locked out of the basin (cuts off power supply) for easy cleaningDrain tap with ball valve in the faceplateTemperature control through thermostat with signal lamp for activated security thermostat limiterOperating knob, power and heat indicator in faceplateIncluded accessories: 2 baskets, 2 lids and 2 protection grids for the heater

Ext. dimensions: W. 600 x D. 600 x H. 230 / 255 mm incl. feetTotal capacity / basin: 12 litresOperating capacity / basin: 8 litresBasket size: 2 x W. 230 x D. 280 x H. 100 mmTemperature range: 50°-185°C Connection value: 16.0 kW / 400 VItem No. 206503Price 2990.-

With reinforced heating: 2 x 10 kWItem No. 206513Price 3290.-

600 Professional


LOCHER

Tel: +44 (0)118 957 1344


-- --

--- -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Heating through heater inside the basinHeating elements can be completely swivelled and locked out of the basin (cuts off power supply) for easy cleaningDrain tap with ball valve in the faceplateTemperature control through thermostat with signal lamp for activated security thermostat limiterOperating knob, power and heat indicator in faceplateCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Basket, lid and protection grid for the heater

Ext. dimensions: W. 400 x D. 600 x H. 850 / 900 mm incl. feetTotal capacity / basin: 12 litresOperating capacity / basin: 8 litresBasket size: W. 230 x D. 280 x H. 100 mmTemperature range: 50°-185°CConnection value: 8.0 kW / 400 VItem No. 206510Price 2290.-



-- --

---

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Heating through heater inside the basinHeating elements can be completely swivelled and locked out of the basin (cuts off power supply) for easy cleaningDrain tap with ball valve in the faceplateTemperature control through thermostat with signal lamp for activated security thermostat limiterOperating knob, power and heat indicator in faceplateCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: 2 baskets, 2 lids and 2 protection grids for the heater

Ext. dimensions: W. 600 x D. 600 x H. 850 / 900 mm incl. feetTotal capacity / basin: 12 litresOperating capacity / basin: 8 litresBasket size: 2 x W. 230 x D. 280 x H. 100 mmTemperature range: 50°-185°CConnection value: 16.0 kW / 400 VItem No. 206511Price 3590.-

With reinforced heating: 2 x 10 kW Item No. 206520Price 3890.-

Deep fryers

600

Prof

essi

onal

600 Professional


LOCHER

www.cuisinequip.com

Deep fryer basket- -

Material: Chrome-plated steelFits to deep fryer 12 lt.


600

Prof

essi

onal

Chip scuttle

Chip scuttle GN 1/1- --

- - --

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Top and bottom heating, separate basin and radiatorswitch3-level main switch (top heating, bottom heating or combined heating) with signal lamp in the faceplateEasy to clean due to smooth surfaces and roundingsIncluded accessories: punched grid in stainless steel

Ext. dimensions: W. 400 x D. 600 x H. 230 / 255 mm incl. feetConnection value: 1.0 kW / 230 VItem No. 206550Price 1690.-

Punched grid with two compartments- -

Material: Stainless steel CNS 18/10In order to keep warm two different products


Clamping bar 600- -



600 Professional


LOCHER

Tel: +44 (0)118 957 1344

Electric Cooker GN 1/1- --

- -- - - -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Cooking basin GN 1/1-150 mm with punched bottom plateIndirect heating, no heater in basinStepless temperature control through thermostat Main switch (3 power levels) with signal lamp Water drain tap in the faceplateIncluded accessories: Punched bottom plate in stainless steelDelivery without container

Ext. dimensions: W. 400 x D. 600 x H. 230 / 255 mm incl. feetTemperature range: 50°-110°CConnection value: 7.0 kW / 400 VItem No. 206675Price 1990.-

Electric bain-marie GN 1/1- --

- -- - - -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Basin for GN 1/1-150 mm with punched bottom plateIndirect heating, no heater in basinStepless temperature control through thermostat Main switch with signal lamp Water drain tap in the faceplateIncluded accessories: Punched bottom plate in stainless steelDelivery without container


Electric bain-marie GN 1 ½- --

- -- - - -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Basin for GN 1 ½-150 mm with punched bottom plateIndirect heating, no heater in basinStepless temperature control through thermostat Main switch with signal lamp Water drain tap in the faceplateIncluded accessories: Punched bottom plate in stainless steelDelivery without container


Cooker / Bain-Marie

600

Prof

essi

onal

600 Professional


LOCHER

www.cuisinequip.com

600

Prof

essi

onal

Electric pasta cooker GN 1/1 horizontal- --

- --- ---

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Cooking basin GN 1/1-150 mm with punched bottom plateand dripping plateIndirect heating, no heater in basinEven temperature distributionStepless temperature control through thermostat Main switch (3 power levels) with signal lamp Water tap and drain tap with fixed connectionIncluded accessories: Dripping plate and punched bottom plate, no con-tainer and no baskets


Electric pasta cooker GN 2/3- --

- --- - - -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Cooking basin GN 2/3-150 mm with punched bottom plateand dripping plateIndirect heating, no heater in basinEven temperature distributionStepless temperature control through thermostat Main switch (3 power levels) with signal lamp Water tap and drain tap with fixed connectionIncluded accessories: Dripping plate and punched bottom plate, no con-tainer and no baskets


Pasta Cookers

Wall connection element- ---

Material: Stainless steel CNS 18/10Suitable for appliance series Flex 600, Stand 700 and Stand 850Element height 100 mmDIY installation, element made of 2 parts.

W in mm 400 600 700 800 1000 1200Item No. 209904 209906 209907 209908 209910 209912Price 140,- 160,- 170,- 180,- 190,- 200,-

600 Professional


LOCHER

Tel: +44 (0)118 957 1344

Accessories

Single portion basket with handle- -

Material: CNS 18/10Suitable for basin height 150 mm


GN 1/6 basket with handle- -



GN 1/3 basket with 2 handles- -



Basket set for pasta cooker GN 2/3 - 150- -

Material: CNS 18/10Consists of 4 x GN 1/6 baskets

Dim. : for GN 2/3 - 150 mm Weight: 2,0 kgItem No. 206624Price 340,-

Basket set for pasta cooker GN 1/1 - 150- -

Material: CNS 18/10Consists of 4 x GN 1/6 and 1 x GN 1/3 baskets

Dim. : for GN 1/1 - 150 mmWeight: 3,5 kgItem No. 206625Price 470,-

Driping plate 1/3- Material: Stainless steel

Suitable for cooker GN 1/1 Item No. 206675Item No. 209660Price 90.-

600

Prof

essi

onal

600 Professional


LOCHER

www.cuisinequip.com

600

Prof

essi

onal

Accessories

Neutral element with drawer- --

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)

Ext. dimensions: W. 400 x D. 600 x H. 230 / 255 mm incl. feetItem No. 206900Price 880.-

Neutral element 400- --

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)

Ext. dimensions: W. 400 x D. 600 x H. 230 / 255 mm incl. feetItem No. 206902Price 690.-

Heating cabinet 400 fan heatedNot suitable under induction appliances- ---

Design in CNS 18/101 hinged doorStepless controlTemperature range in heating cabinet: up to 85°C

Ext. dimensions: W. 400 x D. 540 x H. 620 mm incl. feetConnection value: 1.0 kW / 230 VItem No. 206975Price 990.-

Heating cabinet 600 fan heatedNot suitable under induction appliances- ---

Design in CNS 18/102 hinged doorsStepless controlTemperature range in heating cabinet: up to 85°C

Ext. dimensions: W. 600 x D. 540 x H. 620 mm incl. feetConnection value: 1.0 kW / 230 VItem No. 206976Price 1790.-

Wall connection profile- -

CNS faceplate for compartments of Flex 600 / 650DIY installation

Ext. dimensions: D. 50 x H. 470 mmItem No. 206980Price 48.-

600 Professional


LOCHER

Tel: +44 (0)118 957 1344

Compartments

Compartment 400- --

Design in CNS 18/10Compartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feet

Ext. dimensions: W. 400 x D. 490 x H. 620 mm incl. feetItem No. 206904Price 360.-

Compartment 600- --

Design in CNS 18/10Compartment closed on 3 sides, open at the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feet


Compartment 700- --



Compartment 800- --



Compartment 1000- --



600

Prof

essi

onal

600 Professional


LOCHER

www.cuisinequip.com

600

Prof

essi

onal

Doors

Door 400 for compartments- --

Material: CNS 18 /10 DIY installationDouble skin, hinged for both left or right fixingMagnetic closure

Ext. dimensions: W 400 mmItem No. 209950Price 180,-




Double doors 600 for compartments- --

Material: CNS 18 /10 DIY installationDouble skinMagnetic closure











600 Professional


LOCHER

Tel: +44 (0)118 957 1344

700 ProfessionalWe express our technical knowledge through developing future-oriented technical advances in the field of cooking appliance technology. The high quality and performance standard of the Stand 700 series underscores the use of the products in high-end gastronomy and hotel industry.

Advantages:• Modular design• Large selection of compact free standing appliances• Appliance work top thickness 2 mm entirely from CNS 18/10• The appliances are joined by means of rounded clamping bars• Available in electric or gas• Suitable for installation on hollow or solid base• Optionally available: Preparation for energy optimisation or design in

H2 finishing

With Locher products you will always have at the right solution, whether individual appliance or cooking assembly, leaving the actual user completely happy and satisfied.


LOCHER

www.cuisinequip.com

Gas stove, 4 cooking zonesand electric oven GN 1 1/2- --

----- ---

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Deep moulded hob (approx. 65 mm), easy to cleanPilot flame burner with pilot flameGas shut-off valve in the faceplate2 chrome-plated sliding grids over 2 cooking zones eachElectric oven GN 1 ½Separate control for top / bottom heat (50°-300°C) for optimalindividual temperature controlFully removable baking tray support, for optimal and easy cleaningBuilt-in venting flap in the doorCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: 1 baking tray and 1 oven grid

Ext. dimensions: W. 800 x D. 700 x H. 850 / 900 (body height 700) mm Front left 'C' burner: 3.5 kW, Back left 'D' burner: 5.5 kW Front right 'D' burner: 5.5 kW, Back right 'C' burner: 3.5 kW Nominal heat output: 18.0 kW Gas, appliance set to natural gas H (G20)Connection value oven: 4.6 kW / 400 V electricalItem No. 207004Price 4890.-


----- ---

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Deep moulded hob (approx. 65 mm), easy to cleanPilot flame burner with pilot flameGas shut-off valve in the faceplate3 chrom-plated sliding grids over 2 cooking zones eachElectric oven GN 1 ½Separate control for top / bottom heat (50°-300°C) for optimalindividual temperature controlFully removable baking tray support, for optimal and easy cleaningBuilt-in venting flap in the doorCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: 1 baking tray and 1 oven grid

Ext. dimensions: W. 1200 x D. 700 x H. 850 / 900 (body height 700) mm Front left 'C' burner: 3.5 kW, Back left 'D' burner: 5.5 kW Front centre 'D' burner: 5.5 kW, Back centre 'C' Burner: 3.5 kW Front right 'C' burner: 3.5 kW, Back right 'D' burner: 5.5 kW Nominal heat output: 27.0 kW Gas, appliance set to natural gas H (G20)Connection value oven: 4.6 kW / 400 V electricalItem No. 207006Price 5990.-

Gas

700

Prof

essi

onal

700 Professional


LOCHER

Tel: +44 (0)118 957 1344

'C' burnerSingle circle 3.5 kW

'D' burnerDual circle 5.5 kW

Gas

700

Prof

essi

onal


----- ---

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Deep moulded hob (approx. 65 mm), easy to cleanPilot flame burner with pilot flameGas shut-off valve in the faceplate2 chrome-plated sliding grids over 2 cooking zones eachElectric oven GN 1 ½Separate control for top / bottom heat (50°-300°C) for optimalindividual temperature controlFully removable baking tray support, for optimal and easy cleaningBuilt-in venting flap in the doorCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: 1 baking tray and 1 oven grid

Ext. dimensions: W. 800 x D. 700 x H. 850 / 900 (body height 700) mm 4 x 'D' burner, 5.5 kW each Nominal heat output: 22.0 kW Gas, appliance set to natural gas H (G20)Connection value oven: 4.6 kW / 400 V electricalItem No. 207102Price 4990.-

Power


----- ---

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Deep drawn hob (approx. 65 mm), easy to cleanPilot flame burner with pilot flameGas shut-off valve in the faceplate3 chrome-plated sliding grids over 2 cooking zones eachElectric oven GN 1 ½Separate control for top / bottom heat (50°-300°C) for optimalindividual temperature controlFully removable baking tray support, for optimal and easy cleaningBuilt-in venting flap in the doorCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: 1 baking tray and 1 oven grid


Power

700 Professional


LOCHER

www.cuisinequip.com

700

Prof

essi

onal

Gas stove, 4 cooking zonesand multifunctional oven GN 1 1/2- --

----- -- --

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Deep moulded hob (approx. 65 mm), easy to cleanPilot flame burner with pilot flameGas shut-off valve in the faceplate2 chrome-plated sliding grids over 2 cooking zones eachMultifunctional electric oven GN 1 1/2 with 8 functionsTop / bottom heat, bottom heat, top heat, grill, fan top/bottom heat, hot air, defrosting and cooling downOptimal temperature control from 50°-270°CBaking chamber with interior light with removable baking tray support, for optimal and easy cleaningGlass door with integrated venting flapCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: 1 baking tray and 1 oven grid

Ext. dimensions: W. 800 x D. 700 x H. 850 / 900 (body height 700) mm Front left 'C' burner: 3.5 kW, Back left 'D' burner: 5.5 kW Front right 'D' burner: 5.5 kW, Back right 'C' burner: 3.5 kW Nominal heat output: 18.0 kW Gas, appliance set to natural gas H (G20) Connection value oven: 4.6 kW / 400 V electricalItem No. 207007Price 5590.-


----- -- --

-


Ext. dimensions: W. 1200 x D. 700 x H. 850 / 900 (body height 700) mm Front left 'C' burner: 3.5 kW, Back left 'D' burner: 5.5 kW Front centre 'D' burner: 5.5 kW, Back centre 'C' Burner: 3.5 kW Front right 'C' burner: 3.5 kW, Back right 'D' burner: 5.5 kW Nominal heat output: 27.0 kW Gas, appliance set to natural gas H (G20)Connection value oven: 4.6 kW / 400 V electricalItem No. 207008Price 6790.-

Gas700 Professional


LOCHER

Tel: +44 (0)118 957 1344


----- -- --

-



Power

700

Prof

essi

onal

'C' burnerSingle crown 3.5 kW

'D' burnerDouble crown 5.5 kW


----- -- --

-



Power

Gas700 Professional


LOCHER

www.cuisinequip.com


------ -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)2 cooking zones in lineDeep moulded hob (approx. 65 mm), easy to cleanPilot flame burner with pilot flameGas shut-off valve inside the compartmentCompertment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetChrome-plated sliding grid over 2 cooking zones

Ext. dimensions: W. 400 x D. 700 x H. 850 / 900 (body height 700) mm Front 'C' burner: 3.5 kW Back 'D' burner: 5.5 kW Nominal heat output: 9.0 kW Gas, appliance set to natural gas H (G20)Item No. 207000Price 2320.-


----- -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Deep moulded hob (approx. 65 mm), easy to cleanPilot flame burner with pilot flameGas shut-off valve inside the compartmentCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removingthe height-adjustable feet2 chrome-plated sliding grids over 2 cooking zones each

Ext. dimensions: W. 800 x D. 700 x H. 850 / 900 (body height 700) mm Front left 'C' burner: 3.5 kW, Back left 'D' burner: 5.5 kWFront right 'D' burner: 5.5 kW, Back right 'C' burner: 3.5 kWNominal heat output: 18.0 kW Gas, appliance set to natural gas H (G20)Item No. 207003Price 3590.-


----- -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Deep moulded hob (approx. 65 mm), easy to cleanPilot flame burner with pilot flameGas shut-off valve inside the compartmentCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feet3 chrome-plated sliding grids over 2 cooking zones each

Ext. dimensions: W. 1200 x D. 700 x H. 850 / 900 (body height 700) mm Front left 'C' burner: 3.5 kW , Back left 'D' burner: 5.5 kW Front centre 'D' burner: 5.5 kW, Back centre 'C' Burner: 3.5 kW Front right 'C' burner: 3.5 kW, Back right 'D' burner: 5.5 kW Nominal heat output: 27.0 kW Gas, appliance set to natural gas H (G20)Item No. 207005Price 4790.-

700

Prof

essi

onal

Gas700 Professional


LOCHER

Tel: +44 (0)118 957 1344

700

Prof

essi

onal


------ -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)2 cooking zones in lineDeep moulded hob (approx. 65 mm), easy to cleanPilot flame burner with pilot flameGas shut-off valve inside the compartmentCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetChrome-plated sliding grid over 2 cooking zones

Ext. dimensions: W. 400 x D. 700 x H. 850 / 900 (body height 700) mm 2 x 'D' burner, 5.5 kW each Nominal heat output: 11.0 kW Gas, appliance set to natural gas H (G20)Item No. 207100Price 2420.-

Power


----- -



Power


----- -



Power

Gas700 Professional


LOCHER

www.cuisinequip.com

Oven grid GN 1 1/2- Material: Chrome-plated steel

Dim. : 530 x 500 mmItem No. 207850Price 80,--

Baking tray GN 1 1/2- Material: Steel


Warming plate 701 Gas- -

Material: Steel FE 510, 8 mm thicknessFits one burner

Dim. : 290 x 360 mmItem No. 207020Price 255,-

Single burner sliding grid 701- -

Material: Chrome-plated steelFits one burner


700

Prof

essi

onal


Material: Steel FE 510, 8 mm thicknessFits 2 burners

Dim. : 580 x 360 mm Item No. 207021Price 495,-

Wok Ring- --



Burner hob drain- -

--

For all gas stovesWith removable overflow plug made of CNS18/10 that retains debrisOne drain tap hole for each double hobWith piping into fixed water drain Design in CNS 18/10

Drain tap 3/4” Extends the appliance delivery time!Item No. 209000Price 580.-



LOCHER

Tel: +44 (0)118 957 1344

700

Prof

essi

onal

Electric stove, 4 cooking zones, 3 kW each, infrared cooktop and oven GN 1 ½ - --

------ - --

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installationStepless power control with energy regulatorMain switch with signal lampOverheat protectionResidual heat display under ceran glassElectric oven GN 1 ½Separate control for top / bottom heat (50°-300°C) for optimalindividual temperature controlFully removable baking tray support, for optimal and easy cleaningBuilt-in venting flap in the doorCan be installed on a base (incl. solid base) by removingthe height-adjustable feetIncluded accessories: 1 ceran glass scraper, 1 baking tray and 1 oven grid

Ext. dimensions: W. 800 x D. 700 x H. 850 / 900 (body height 700) mm Infrared cooktop: 4 x round Ø 230 mm, 3.0 kW each Ceran glass: W. 750 x 605 mm, thickness 6 mmConnection value: 16.6 kW / 400 VItem No. 207306Price 5390.-

Electric stove, 4 cooking zones, 3 kW each,infrared cooktop with electronic pot detection and oven GN 1 ½- --

-------

---

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installationStepless power control with energy regulatorMain switch with signal lampElectronic pot detection / overheat protectionElectronic pot detection can be deactivated through main switchResidual heat display under ceran glassElectric oven GN 1 ½Separate control for top / bottom heat (50°-300°C) for optimalindividual temperature controlFully removable baking tray support, for optimal and easy cleaningBuilt-in venting flap in the doorCan be installed on a base (incl. solid base) by removingthe height-adjustable feetIncluded accessories: 1 ceran glass scraper, 1 baking tray and 1 oven grid

Ext. dimensions: W. 800 x D. 700 x H. 850 / 900 (body height 700) mm infrared cooktop: 4 x round Ø 230 mm, 3.0 kW each with electronic pot detectionCeran glass: W. 750 x D. 605 mm, thickness 6 mmConnection value: 16.6 kW / 400 VItem No. 207307Price 6290.-

Infrared cooktop700 Professional


LOCHER

www.cuisinequip.com

Electric stove, 4 cooking zones, 3 kW each, Infrared cooktop and multifunctional electric oven GN 1 ½- --

------ - - -- -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installationStepless power control with energy regulatorMain switch with signal lampOverheat protectionResidual heat display under ceran glassMultifunctional electric oven GN 1 1/2 with 8 functionsTop / bottom heat, bottom heat, top heat, grill, fan top/bottom heat, hot air, defrosting and cooling downOptimal temperature control from 50°-270°CBaking chamber with interior light with removable baking tray support, for optimal and easy cleaningGlass door with integrated venting flapCan be installed on a base (incl. solid base) by removingthe height-adjustable feetIncluded accessories: 1 ceran glass scraper, 1 baking tray and 1 oven grid

Ext. dimensions: W. 800 x D. 700 x H. 850 / 900 (body height 700) mm Infrared cooktop: 4 x round Ø 230 mm, 3.0 kW each Ceran glass: W. 750 x 605 mm, thickness 6 mmConnection value: 16.6 kW / 400 VItem No. 207310Price 6190.-

Electric stove, 4 cooking zones, 3 kW each,Infrared cooktop with electronic pot detection and multifunctional oven GN 1 ½- --

-----

--

--

-



700

Prof

essi

onal



LOCHER

Tel: +44 (0)118 957 1344

700

Prof

essi

onal





Ceramic glass scraper - Material: Nickel-plated steel


Clamping bar 700- -


Dim. : Length 700 mm, Ø 14 mmItem No. 207999Price 85,-



LOCHER

www.cuisinequip.com

700

Prof

essi

onal

Electric stove, 6 cooking zones, 3 kW each,infrared cooktop and oven GN 1 ½- ---------

- -- -


Ext. dimensions: W. 1200 x D. 700 x H. 850 / 900 (body height 700) mm Infrared cooktop: 6 x round Ø 230 mm, 3.0 kW each Ceran glass: 1150 x 605 mm, thickness 6 mmConnection value: 22.6 kW / 400 VItem No. 207312Price 6590.-

Electric stove, 6 cooking zones, 3 kW each, Infrared cooktop with electronic pot detectionand oven GN 1 ½- --------- -

- -

-





LOCHER

Tel: +44 (0)118 957 1344

700

Prof

essi

onal

Electric stove, 6 cooking zones, 3 kW each,Infrared cooktop and multifunctional electric oven GN 1 ½- --

-----

--

--

-



Electric stove, 6 cooking zones, 3 kW each, Infrared cooktop with electronic pot detectionand multifunctional oven GN 1 ½- --

-----

--

--

-





LOCHER

www.cuisinequip.com


-------- -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installation2 cooking zones in lineStepless power control with energy regulatorMain switch with signal lampOverheat protectionResidual heat display under ceran glassCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: 1 ceran glass scraper

Ext. dimensions: W. 400 x D. 700 x H. 850 / 900 (body height 700) mm infrared cooktop: 2 x round Ø 230 mm, 3.0 kW each Ceran glass: 350 x 605 mm, thickness 6 mmConnection value: 6.0 kW / 400 VItem No. 207300Price 2390.-

Electric stove, 2 cooking zones, 3 kW each, Infrared cooktop with electronic pot detection- --

---------

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installation2 cooking zones in lineStepless power control with energy regulatorMain switch with signal lampElectronic pot detection / overheat protectionElectronic pot detection can be deactivated through main switchResidual heat display under ceran glassCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: 1 ceran glass scraper

Ext. dimensions: W. 400 x D. 700 x H. 850 / 900 (body height 700) mm Infrared cooktop: 2 x round Ø 230 mm, 3.0 kW each with electronic pot detectionCeran glass: W. 350 x D. 605 mm, thickness 6 mmConnection value: 6.0 kW / 400 VItem No. 207301Price 2990.-

700

Prof

essi

onal



LOCHER

Tel: +44 (0)118 957 1344

700

Prof

essi

onal


------- -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installationStepless power control with energy regulatorMain switch with signal lampOverheat protectionResidual heat display under ceran glassCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: 1 ceran glass scraper

Ext. dimensions: W. 800 x D. 700 x H. 850 / 900 (body height 700) mm infrared cooktop: 2 x round Ø 230 mm, 3.0 kW each Ceran glass: W. 750 x 605 mm, thickness 6 mmConnection value: 12.0 kW / 400 VItem No. 207302Price 3590.-


--------

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installationStepless power control with energy regulatorMain switch with signal lampElectronic pot detection / overheat protectionElectronic pot detection can be deactivated through main switchResidual heat display under ceran glassCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: 1 ceran glass scraper

Ext. dimensions: W. 800 x D. 700 x H. 850 / 900 (body height 700) mm Infrared cooktop: 4 x round Ø 230 mm, 3.0 kW each with electronic pot detectionCeran glass: W. 750 x D. 605 mm, thickness 6 mmConnection value: 12.0 kW / 400 VItem No. 207303Price 4590.-

Clamping bar 700- -





LOCHER

www.cuisinequip.com


------- -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installationStepless power control with energy regulatorMain switch with signal lampOverheat protectionResidual heat display under ceran glassCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: 1 ceran glass scraper



--------

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installationStepless power control with energy regulatorMain switch with signal lampElectronic pot detection / overheat protectionElectronic pot detection can be deactivated through main switchResidual heat display under ceran glassCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: 1 ceran glass scraper




700

Prof

essi

onal



LOCHER

Tel: +44 (0)118 957 1344





H2 finishing- H2 hygiene finishing for compartments

Surcharge for every unit/compartment. Extends the appliance delivery time!Not available for ovensItem No. 209900Price 590,-

H2 finishing for ovens- H2 hygiene finishing for electric ovens

Surcharge for every unit/compartment. Extends the appliance delivery time!Specifically for ovensArt.Nr. 209990Preis 1000,-

Energy optimisation for electric heating- Preparation for energy optimisation

For appliances like infrared cooktops, deep fryers, cookers, bainmarie and ovens. Surcharge for every unit. Extends the appliance delivery time!Item No. 209260Price 250,-

Energy optimisation for griddles and bratt pans- Preparation for energy optimisation

For griddles and bratt pans Surcharge for every unit.Extends the appliance delivery time!Item No. 209270Price 350,-

Energy optimisation for induction- Preparation for energy optimisation

Control circuit for each unit Extends the appliance delivery time!Item No. 209250Price 450,-

700

Prof

essi

onal

Optionals & Accessories700 Professional


LOCHER

www.cuisinequip.com

700

Prof

essi

onal

Induction stove, 4 cooking zones, 5 kW eachwith multifunctional oven GN 1 ½- -----------

-- --

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installation, edges roundedStepless power controller 1-9Main switch with signal lamp Pot detection / overheat protectionDigital display under ceran glassResidual heat indicator in displayFans integrated in the bottom of the applianceExchangeable aluminium grease filters (suitable for dish washers)Multifunctional electric oven GN 1 1/2 with 8 functionsTop / bottom heat, bottom heat, top heat, grill, fan top/bottom heat, hot air, defrosting and cooling downOptimal temperature control from 50°-270°CBaking chamber with interior light with removable baking tray support, for optimal and easy cleaningGlass door with integrated venting flapIncluded accessories: Aluminium grease filter, 1 baking tray and 1 oven grid

Ext. dimensions: W. 800 x D. 700 x H. 850 / 900 (body height 700) mm 4 round coils Ø 230 mm, 5.0 kW each Baking oven GN 1 ½, 6.0 kWCeran glass: W. 750 x D. 605 mm, thickness 6 mmConnection value: 24.6 kW / 400 VItem No. 207209Price 15990.-

Induction stove, 4 cooking zones, 5 kW eachwith oven GN 1 1/2- ------------ -

--

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installationStepless power controller 1-9Main switch with signal lamp Pot detection / overheat protectionDigital display under ceran glassResidual heat indicator in displayFans integrated in the bottom of the applianceExchangeable aluminium grease filters (suitable for dish washers)Electric oven GN 1 ½Separate control for top / bottom heat (50°-300°C) for optimalindividual temperature controlFully removable baking tray support, for optimal and easy cleaningBuilt-in venting flap in the doorIncluded accessories: Aluminium grease filter, 1 baking tray and 1 oven grid

Ext. dimensions: W. 800 x D. 700 x H. 850 / 900 (body height 700) mm 4 round coils Ø 230 mm, 5.0 kW each Oven GN 1 ½, 4.6 kWCeran glass: W. 750 x D. 605 mm, thickness 6 mmConnection value: 24.6 kW / 400 VItem No. 207208Price 13990.-

Induction700 Professional


LOCHER

Tel: +44 (0)118 957 1344

700

Prof

essi

onal

Induction stove, 6 cooking zones, 5 kW eachwith multifunctional oven GN 1 ½- -----------

-- --

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installation, edges roundedStepless power controller 1-9Main switch with signal lamp Pot detection / overheat protectionDigital display under ceran glassResidual heat indicator in displayFans integrated in the bottom of the applianceExchangeable aluminium grease filters (suitable for dish washers)Multifunctional electric oven GN 1 1/2 with 8 functionsTop / bottom heat, bottom heat, top heat, grill, fan top/bottom heat, hot air, defrosting and cooling downOptimal temperature control from 50°-270°CBaking chamber with interior light with removable baking tray support, for optimal and easy cleaningGlass door with integrated venting flapIncluded accessories: Aluminium grease filter, 1 baking tray and 1 oven grid

Ext. dimensions: W. 1200 x D. 700 x H. 850 / 900 (body height 700) mm 6 round coils Ø 260 mm, 5.0 kW each Baking oven GN 1 ½, 6.0 kWCeran glass: W. 1150 x D. 605 mm, thickness 6 mmConnection value: 34.6 kW / 400 VItem No. 207211Price 18590.-

Induction stove, 6 cooking zones, 5 kW eachwith oven GN 1 1/2- ------------ -

--

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installationStepless power controller 1-9Main switch with signal lamp Pot detection / overheat protectionDigital display under ceran glassResidual heat indicator in displayFans integrated in the bottom of the applianceExchangeable aluminium grease filters (suitable for dish washers)Electric oven GN 1 ½Separate control for top / bottom heat (50°-300°C) for optimalindividual temperature controlFully removable baking tray support, for optimal and easy cleaningBuilt-in venting flap in the doorIncluded accessories: Aluminium grease filter, 1 baking tray and 1 oven grid

Ext. dimensions: W. 1200 x D. 700 x H. 850 / 900 (body height 700) mm 6 round coils Ø 260 mm, 5.0 kW each Oven GN 1 ½, 4.6 kWCeran glass: W. 1150 x D. 605 mm, thickness 6 mmConnection value: 34.6 kW / 400 VItem No. 207210Price 17990.-



LOCHER

www.cuisinequip.com

700

Prof

essi

onal

Induction stove, 2 cooking zones, 3.5 kW each- --

-----------

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installation2 cooking zones in lineStepless power controller 1-9Main switch with signal lamp Pot detection / overheat protectionDigital display under ceran glassResidual heat indicator in displayFans integrated in the bottom of the applianceExchangeable aluminium grease filter (can be washed in dish washer)Compartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Aluminium grease filter

Ext. dimensions: W. 400 x D. 700 x H. 850 / 900 (body height 700) mm 2 round coils Ø 260 mm, 3.5 kW each Ceran glass: W. 350 x D. 605 mm, thickness 6 mmConnection value: 7.0 kW / 400 VItem No. 207200Price 5150.-

Induction stove, 2 cooking zones, 5 kW each- --

-----------

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installation2 cooking zones in lineStepless power controller 1-9Main switch with signal lamp Pot detection / overheat protectionDigital display under ceran glassResidual heat indicator in displayFans integrated in the bottom of the applianceExchangeable aluminium grease filter (can be washed in dish washer)Compartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removingthe height-adjustable feetIncluded accessories: Aluminium grease filter


Clamping bar 700- -





LOCHER

Tel: +44 (0)118 957 1344


----------

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installationStepless power controller 1-9Main switch with signal lamp Pot detection / overheat protectionDigital display under ceran glassResidual heat indicator in displayFans integrated in the bottom of the applianceExchangeable aluminium grease filters (suitable for dish washers)Compartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Aluminium grease filter

Ext. dimensions: W. 800 x D. 700 x H. 850 / 900 (body height 700) mm 4 round coils Ø 260 mm, 3.5 kW each Ceran glass: W. 750 x D. 605 x thickness 6 mmConnection value: 14.0 kW / 400 VItem No. 207202Price 8890.-


----------

-


Ext. dimensions: W. 800 x D. 700 x H. 850 / 900 (body height 700) mm 4 round coils Ø 260 mm, 5.0 kW each Ceran glass: W. 750 x D. 605 x thickness 6 mmConnection value: 20.0 kW / 400 VItem No. 207203Price 9490.-

700

Prof

essi

onal



LOCHER

www.cuisinequip.com


----------

-




----------

-



Clamping bar 700- -



700

Prof

essi

onal



LOCHER

Tel: +44 (0)118 957 1344

700

Prof

essi

onal

Induction stove, 4 cooking zones, 5 kW eachFull coverage induction- --

---------- -


Ext. dimensions: W. 800 x D. 700 x H. 850 / 900 (body height 700) mm 4 full coverage coils 300 x 280 mm, 5.0 kW eachCeran glass: W. 750 x D. 605 mm, thickness 6 mmConnection value: 20.0 kW / 400 VItem No. 207204Price 13550.-

Induction stove, 2 cooking zones, 5 kW eachSurface induction- --

---------- -


Ext. dimensions: W. 400 x D. 700 x H. 850 / 900 (body height 700) mm 2 comprehensive covering coils 280 x 280 mm, 5.0 kW eachCeran glass: W. 350 x D. 605 mm, thickness 6 mmConnection value: 10.0 kW / 400 VItem No. 207205Price 6390.-

Full coverage induction



LOCHER

www.cuisinequip.com

700

Prof

essi

onal








----------

-


Ext. dimensions: W. 1200 x D. 700 x H. 850 / 900 (body height 700) mm 6 full coverage coils 300 x 280 mm, 5.0 kW each Ceran glass: W. 1150 x D. 605 mm, thickness 6 mmConnection value: 30.0 kW / 400 VItem No. 207212Price 15990.-




LOCHER

Tel: +44 (0)118 957 1344

700

Prof

essi

onal

Induction stove, 1 wok cooking zone, 5 kW- --

----------

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass bowl (Cuvette) flush-mounted installation from belowStepless power controller 1-9Main switch with signal lamp Pot detection / overheat protectionDigital display under ceran glassResidual heat indicator in displayFan integrated in the bottom of the applianceExchangeable aluminium grease filter (can be washed in dish washer)Compartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Aluminium grease filter

Ext. dimensions: W. 400 x D. 700 x H. 850 / 900 (body height 700) mmCeran glass bowl (Cuvette): Ø 300 mm Connection value: 5.0 kW / 400 VItem No. 207285Price 4490.-

Wok pan- -



Wok pan- -



Wok pan- -



Wok pan- -





LOCHER

www.cuisinequip.com


--- --- --

-

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional) 1 heating zone with removable splash guardSmooth griddle, welded 20 mm recessed Surface made of special steel FE510, polished surface (can rust if not greased)Stepless temperature control through thermostatControl knob and signal lamp in the faceplateFat drain (125 x 35 mm) in removable grease drawerCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Removable splash guard, grease drawer, spatula and stainless steel cleaning spongeOptional: chrome-plated grid (375 x 180 mm) to be placed on the splash guard

Ext. dimensions: W. 400 x D. 700 x H. 850 / 900 (body height 700) mmSurface: 320 x 520 mmTemperature range 60°-300°CConnection value: 4.5 kW / 400 VItem No. 207431Price 3090.-


--- -- --- - -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional) 2 separate heating zones with removable splash guardSmooth griddle, welded 20 mm recessed Surface made of special steel FE510, polished surface(can rust if not greased)Stepless temperature control through thermostatControl knob and signal lamp in the faceplateFat drain (125 x 35 mm) in removable grease drawerCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Removable splash guard, grease drawer, spatula and stainless steel cleaning spongeOptional: chrome-plated grid (575 x 180 mm) to be placed on the splash guard

Ext. dimensions: W. 600 x D. 700 x H. 850 / 900 (body height 700) mm Surface: 520 x 520 mmTemperature range 60°-300°CConnection value: 7.5 kW / 400 VItem No. 207432Price 3990.-

700

Prof

essi

onal

Griddles700 Professional


LOCHER

Tel: +44 (0)118 957 1344


--- --- -- -

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional) 2 separate heating zones with removable splash guardSmooth griddle, welded 20 mm recessed Surface made of special steel FE510, polished surface (can rust if not greased)Stepless temperature control through thermostatControl knob and signal lamp in the faceplateFat drain (125 x 35 mm) in removable grease drawerCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Removable splash guard, grease drawer, spatula and stainless steel cleaning spongeOptional: chrome-plated grid (775 x 180 mm) to be placed on the splash guard

Ext. dimensions: W. 800 x D. 700 x H. 850 / 900 (body height 700) mm Surface: 720 x 520 mmTemperature range: 60°-300°CConnection value: 10.5 kW / 400 VItem No. 207433Price 4690.-

700

Prof

essi

onal



LOCHER

www.cuisinequip.com


--- --- --

-

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional) 2 separate heating zones with removable splash guardSmooth griddle, welded 20 mm recessed Surface made of special steel FE510, polished surface, ½ grooved (can rust if not greased)Stepless temperature control through thermostatControl knob and signal lamp in the faceplateFat drain (125 x 35 mm) in removable grease drawerCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Removable splash guard, grease drawer, spatula and stainless steel cleaning spongeOptional: chrome-plated grid (775 x 180 mm) to be placed on the splash guard



--- --- --

-

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional) 2 separate heating zones with removable splash guardSmooth griddle, welded 20 mm recessed Surface made of special steel FE510, polished surface, ½ grooved (can rust if not greased)Stepless temperature control through thermostatControl knob and signal lamp in the faceplateFat drain (125 x 35 mm) in removable grease drawerCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removingthe height-adjustable feetIncluded accessories: Removable splash guard, grease drawer, spatula and stainless steel cleaning spongeOptional: chrome-plated grid (575 x 180 mm) to be placed on the splash guard


700

Prof

essi

onal



LOCHER

Tel: +44 (0)118 957 1344


---- -- ---

-

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)1 heating zone with removable splash guardSurface made of special steel, chrome-plated surfaceSmooth griddle, welded 20 mm recessed Aluminium block contact heater for excellent heat retentionand even temperature distributionStepless temperature control through thermostatControl knob and signal lamp in the faceplateFat drain (125 x 35 mm) in removable grease drawerCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Removable splash guard, grease drawer, spatula and stainless steel cleaning spongeOptional: chrome-plated grid (375 x 180 mm) to be placed on the splash guard



------- ---

-

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)2 separate heating zones with removable splash guardSurface made of special steel, chrome-plated surfaceSmooth griddle, welded 20 mm recessed Aluminium block contact heater for excellent heat retentionand even temperature distributionStepless temperature control through thermostatControl knob and signal lamp in the faceplateFat drain (125 x 35 mm) in removable grease drawerCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Removable splash guard, grease drawer, spatula and stainless steel cleaning spongeOptional: chrome-plated grid (575 x 180 mm) to be placed on the splash guard

Ext. dimensions: W. 600 x D. 700 x H. 850 / 900 (body height 700) mmSurface: 520 x 520 mmTemperature range: 50°-250°CConnection value: 7.5 kW / 400 VItem No. 207401Price 4990.-

700

Prof

essi

onal



LOCHER

www.cuisinequip.com


------- ---

-

-



700

Prof

essi

onal

Scraper for grooved griddles- Material: Blade of stainless steel CNS 18/10




Teflon plug for fat drain 125 x 35 mm- Material: Teflon


Clamping bar 700- -





LOCHER

Tel: +44 (0)118 957 1344


---- -- ---

-

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)2 separate heating zones with removable splash guardSurface made of special steel, chrome-plated surfaceSmooth griddle, welded 20 mm recessed Aluminium block contact heater for excellent heat retentionand even temperature distributionnStepless temperature control through thermostatControl knob and signal lamp in the faceplateFat drain (125 x 35 mm) in removable grease drawerCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Removable splash guard, grease drawer, spatula and stainless steel cleaning spongeOptional: chrome-plated grid (575 x 180 mm) to be placed on the splash guard



---- -- ---

-

-



700

Prof

essi

onal



LOCHER

www.cuisinequip.com


-

- --- --

-

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Surface made of special compound stainless steel, smoothly weldedAluminium block contact heater for excellent heat retentionand even temperature distribution1 heating zone with stepless temperature control through thermostatControl knob and signal lamp in the faceplateRound drain tap (Ø 55 mm) with teflon plug and collection trayGN 1/1-150 in the compartmentCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Teflon plug, collection tray GN 1/1-150, spatula and stainless steel cleaning spongeOptional: Removable CNS splash guard

Ext. dimensions: W. 400 x D. 700 x H. 850 / 900 (body height 700) mm Surface: 340 x 540 mmInner pan height: 80 mmTemperature range: 60°-300°CConnection value: 4.5 kW / 400 VItem No. 207471Price 3990.-


- - --- --

-

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Surface made of special compound stainless steel, smoothly welded Aluminium block contact heater for excellent heat retentionand even temperature distribution2 heating zones with stepless temperature control through thermostatControl knob and signal lamp in the faceplateRound drain tap (Ø 55 mm) with teflon plug and collection trayGN 1/1-150 in the compartmentCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Teflon plug, collection tray GN 1/1-150, spatula and stainless steel cleaning spongeOptional: Removable CNS splash guard


700

Prof

essi

onal

Bratt Pans700 Professional


LOCHER

Tel: +44 (0)118 957 1344


- - --- --

-

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Surface made of special compound stainless steel, smoothly welded Aluminium block contact heater for excellent heat retentionand even temperature distribution2 heating zones with stepless temperature control through thermostatControl knob and signal lamp in the faceplateRound drain tap (Ø 55 mm) with teflon plug and collection trayGN 1/1-150 in the compartmentCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Teflon plug, collection tray GN 1/1-150, spatula and stainless steel cleaning spongeOptional: Removable CNS splash guard


700

Prof

essi

onal











LOCHER

www.cuisinequip.com

700

Prof

essi

onal

Electric bratt pan GN 2/1with double skin hinged lid- --

- - --- - -

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Surface made of special compound stainless steel, smoothly welded Aluminium block contact heater for excellent heat retentionand even temperature distribution2 heating zones with stepless temperature control through thermostatControl knob and signal lamp in the faceplateRound drain tap (Ø 55 mm) with teflon plug and 2 " ball valveCompartment closed on 3 sides, with collection tray GN 1/1-200 in extract-able drawer underneathCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Teflon plug, collection tray GN 1/1-200, spatula and stainless steel cleaning sponge

Ext. dimensions: W. 700 x D. 700 x H. 850 / 900 (body height 700) mmSurface: 630 x 510 mmInner pan height: 165 mmTemperature range: 60°-300°CConnection value: 9 kW / 400 VItem No. 207480Price 7290.-

Multi purpose bratt pan700 Professional


LOCHER

Tel: +44 (0)118 957 1344

700

Prof

essi

onal

Electric multi function bratt pan GN 2/1with double skin hinged lid- --

--- -

---

-

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Surface made of special compound stainless steel, smoothly welded Water tap with fixed connectionAluminium block contact heater for excellent heat retentionand even temperature distributionStepless temperature control through thermostat for:Griddle function with 2 independent heating zones Cooking function with one heating zone Control knob and signal lamp in the faceplateRound drain tap (Ø 55 mm) with teflon plug and 2" ball valveCompartment closed on 3 sides, with collection tray GN 1/1-200 in extract-able drawer underneathCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Teflon plug, collection tray GN 1/1-200, spatula and stainless steel cleaning sponge

Ext. dimensions: W. 700 x D. 700 x H. 850 / 900 (body height 700) mmSurface: 630 x 510 mmInner pan height: 165 mmTemperature range: 60°-300°CConnection value: 13.8 kW / 400 VItem No. 207481Price 8290.-



Cleaning water direct drain- Fixed connection to water tap required

For cooking device Extends the appliance delivery time!Item No. 209440Price 1250.-

Clamping bar 700- -



Multi cooking device700 Professional


LOCHER

www.cuisinequip.com


---- - - --

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Removable anti-stick cast iron grids1 heating zone with stepless temperature control through thermostatControl knob and signal lamp in the faceplateHeating elements can be completely swivelled and locked out of the fat tank (cuts power supply) for easy cleaningFat tank with drain incl. 1" ball valve in compartmentFat tank can be filled with water for easier cleaning (tankdepth approx. 150 mm)Compartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: spatula and cleaning sponge



---- - - --

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional) Removable anti-stick cast iron grids2 heating zones with stepless temperature control through thermostatControl knob and signal lamp in the faceplateHeating elements can be completely swivelled and locked out of the fat tank (cuts power supply) for easy cleaningFat tank with drain incl. 1” ball valve in compartmentFat tank can be filled with water for easier cleaning (tankdepth approx. 150 mm)Compartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: spatula and cleaning sponge


700

Prof

essi

onal



LOCHER

Tel: +44 (0)118 957 1344

700

Prof

essi

onal


---- - --- -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional) Removable anti-stick cast iron grids1 heating zone with stepless temperature control through thermostatControl knob and signal lamp in the faceplateUpper heating elements can be completely swivelled and locked out (cuts off power supply)Lower heating elements rigidly installed beneath the lava stonesCollecting drawer removableCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: spatula and cleaning sponge



---- - --- -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional) Removable anti-stick cast iron grids2 heating zones with stepless temperature control through thermostatControl knob and signal lamp in the faceplateUpper heating elements can be completely swivelled and locked out (cuts off power supply)Lower heating elements rigidly installed beneath the lava stonesCollecting drawer removableCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: spatula and cleaning sponge




Steak Grill Rustica Lava700 Professional


LOCHER

www.cuisinequip.com

700

Prof

essi

onal

Electric fryer with 1 basin, 1 x 12 litres- --

-- -- - - - -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Heating through heater inside the basinHeating elements can be completely swivelled and locked out of the basin (cuts power supply) for easy cleaningElectronically controlled temperature regulation with melting stageOperating knob, power and heat indicator in faceplateDrain tap with ball valve 1“ in compartment(Grease container optional)Compartment closed on 3 sides, open in the front (door optional)Can be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Ball valve, basket, lid and protection grid for the heater

Ext. dimensions: W. 300 x D. 700 x H. 850 / 900 (body height 700) mm Total filling capacity/basin: 12 litresOperating capacity / basin: 8 litresBasket size: W. 230 x D. 280 x H. 100 mmTemperature range: 50°-185°C and melting stageConnection value: 8.0 kW / 400 VItem No. 207500Price 2790.-



-- -- - - -

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Heating through heater inside the basinHeating elements can be completely swivelled and locked out of the basin (cuts power supply) for easy cleaningElectronically controlled temperature regulation with melting stageOperating knob, power and heat indicator in faceplateDrain tap with ball valve 1“ in compartment(Grease container optional)Compartment closed on 3 sides, open in the front (door optional)Can be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Ball valve, basket, lid and protection grid for the heater

Ext. dimensions: W. 400 x D. 700 x H. 850 / 900 (body height 700) mm Total filling capacity/basin: 20 litresOperating capacity / basin: 16.5 litresBasket size: W. 290 x D. 280 x H. 120 mmTemperature range: 50°-185°C + melting stageConnection value: 16.5 kW / 400 VItem No. 207501Price 3890.-

Deep fryers700 Professional


LOCHER

Tel: +44 (0)118 957 1344

700

Prof

essi

onal


-- -- - - - -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Heating through heater inside the basinHeating elements can be completely swivelled and locked out of the basin (cuts power supply) for easy cleaningElectronically controlled temperature regulation with melting stageOperating knob, power and heat indicator in faceplateDrain tap with ball valve 1“ in compartment(Grease container optional)Compartment closed on 3 sides, open in the front (door optional)Can be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: 2 ball valves, 2 baskets, 2 lids and 2 protection grids for the heater

Ext. dimensions: W. 400 x D. 700 x H. 850 / 900 (body height 700) mm Total filling capacity/basin: 10 LitreOperating capacity / basin: 6 litresBasket size: 2 x W. 120 x D. 300 x H. 120 mmTemperature range: 50°-185°C + melting stageConnection value: 12.0 kW / 400 VItem No. 207502Price 4190.-



-- -- - - -

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Heating through heater inside the basinHeating elements can be completely swivelled and locked out of the basin (cuts power supply) for easy cleaningElectronically controlled temperature regulation with melting stageOperating knob, power and heat indicator in faceplateDrain tap with ball valve 1“ in compartment(Grease container optional)Compartment closed on 3 sides, open in the front (door optional)Can be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: 2 ball valves, 2 baskets, 2 lids and 2 protection grids for the heater

Ext. dimensions: W. 600 x D. 700 x H. 850 / 900 (body height 700) mm Total filling capacity/basin: 12 litresOperating capacity / basin: 8 litresBasket size: 2 x W. 230 x D. 280 x H. 100 mmTemperature range: 50°-185°C + melting stageConnection value: 16.0 kW / 400 VItem No. 207503Price 4350.-




LOCHER

www.cuisinequip.com

Chip scuttle GN 1/1- --

- - - -

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Top and bottom heating, separate basin and radiator switch3-level main switch (for top heat, bottom heat, or combined heating) with signal lamps in the faceplateEasy to clean due to smooth surfaces and roundingsCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feet Included accessories: Punched grid in stainless steel

Ext. dimensions: W. 400 x D. 700 x H. 850 / 900 (body height 700) mm Connection value: 1.0 kW / 230 VItem No. 207550Price 2390.-

Punched grid with two compartments- -

Material: Stainless steel CNS 18/10In order to keep warm two different products


700

Prof

essi

onal










Chip scuttle700 Professional


LOCHER

Tel: +44 (0)118 957 1344

700

Prof

essi

onal

Oil filter kit for deep fryer with 1 basin- -----

-

Material CNS 18/10, no retrofitting possibleGrease collection container with removable s/s and cloth filterCapacity 20 lt.Base plate with oil pump and connection hose to oil tankRigid oil recirculation pipe with quick coupling connector to the basinHose with quick coupling connector for disposal of used oil in external containerSaves up to 40-50% of oil if regularly used

Dim. : 322 x 568 x 287 mmConnection value: 0,1 kW / 230 V Extends the appliance delivery time!Item No. 209550Price 1690,-

Oil filter kit for deep fryer with 2 basins- ----

-

Grease collection container with 2 removable s/s and cloth filtersCapacity 20 lt.Base plate with oil pump and connection hose to oil tankRigid oil recirculation pipe with quick coupling connector to the basinHose with quick coupling connector for disposal of used oil in external containerSaves up to 40-50% of oil if regularly used


Small grease collection container- Material: CNS 18/10, capacity 12 lt.

Dim. : 130 x 550 x 180 mmWeght: 1,4 kgItem No. 209552Price 215,-

Large grease collection container- Material: CNS 18/10, capacity 25 lt.






LOCHER

www.cuisinequip.com


- -- -- -

- -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Cooking basin GN 2/3-220 mm with punched bottom and dripping plateIndirect heating, no heater in basinMain switch (3 power levels) with signal lamp Stepless temperature control through thermostatWater tap and drain tap with fixed connectionCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removingthe height-adjustable feetIncluded accessories: Drippng plate, punched bottom plateNo containers and no baskets

Ext. dimensions: W. 400 x D. 700 x H. 850 / 900 (body height 700) mmTemperature range: 50°-110°CConnection value: 8.0 kW / 400 VItem No. 207600Price 3990.-

Electric cooker GN 1/1 - --

---- - -- -

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Cooking basin GN 1/1-220 mm with punched bottom plateIndirect heating, no heater in basinStepless temperature control through thermostat Main switch (3 power levels) with signal lampWater tap with fixed connection Water drain through ball valve 1“ into compartment Compartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Drain tap and punched bottom plate. No container and no dripping plate


Basket set for pasta cooker GN 2/3- -

Material CNS 18/10Consists of 4 baskets GN 1/6

Dim. : 4 x 143 x 163 x 230 mmItem No. 209630Price 440,-

700

Prof

essi

onal

Connection set for fixed water drain- -

Elbow 90 ° with flexible stainless steel pipe 500- 1000 mm longSuitable for 207675, DIY installation

Item No. 209600Price 120.-

Cookers / pasta cookers700 Professional


LOCHER

Tel: +44 (0)118 957 1344

Electric pasta cooker GN 2/3 with basket lift system- --

- -- - - --

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Cooking basin GN 2/3-220 mm with punched bottom and drippng plateIndirect heating, no heater in basinMain switch with signal lamp and electronic control Electronic water level control with automatic refillWater tap and drain tap with fixed connection3 independent basket lifts with timerCompartment closed on 3 sides, with doorCan be installed on a base (incl. solid base) by removingthe height-adjustable feetIncluded accessories: Dripping plate, punched bottom plateand 3 pasta baskets GN 2/9



- -- - --

- -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Cooking basin GN 1/1-220 mm with punched bottom and dripping plateIndirect heating, no heater in basinMain switch (3 power levels) with signal lampStepless temperature control through thermostat Water tap and drain tap with fixed connectionCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removingthe height-adjustable feetIncluded accessories: Dripping plate, punched bottom plateNo containers and no baskets



Material CNS 18/10Consists of 4 baskets GN 1/6 and 1 basket GN 1/3

Dim. : 4 x 143 x 163 x 230 mm + 1 x 298 x 163 x 230 mmItem No. 209631Price 580,-

700

Prof

essi

onal

Pasta Cookers700 Professional


LOCHER

www.cuisinequip.com


Material: CNS 18/10Suitable for basin height 200 mm, both GN 2/3 and GN 1/1














700

Prof

essi

onal



LOCHER

Tel: +44 (0)118 957 1344

Lid for pasta cooker GN 2/3- -

Material: CNS 18/10Suitable for basin GN 2/3





Clamping bar 700- -



700

Prof

essi

onal

GN 2/9 basket with handle for automatic lift system- -

Material: CNS 18/10Only suitable for pasta cooker 207602

Dim. : 94 x 298 x 230 mmWeight: 1.2 kgItem No. 209627Price 140.-



Electronic water level control with automatic refill-

-

Electronic control of the water level of the basin with automatic refill tapSuitable for pasta cooker 207600 and 207601Extends the appliance delivery time!

Item No. 209650Price 1100,-



LOCHER

www.cuisinequip.com


---- - -- - -

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Basin GN 1/1-220 mm with punched bottom plateIndirect heating, no heater in basinEven temperature distributionStepless temperature control through thermostat Main switch with signal lamp Water tap with fixed connectionWater drain tap through ball valve 3/4" in compartment(Connection set to fixed water connection optional)Compartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Drain tap and punched bottom plateNo container

Ext. dimensions: W. 400 x D. 700 x H. 850 / 900 (body height 700) mm Temperature range: 30°-85°CConnection value: 1.8 kW / 230 VItem No. 207636Price 2190.-


---- - - - --

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Basin GN 2/1-220 mm with punched bottom plateIndirect heating, no heater in basinEven temperature distributionStepless temperature control through thermostat Main switch with signal lamp Water tap with fixed connectionWater drain tap through ball valve 3/4” in compartment(Connection set to fixed water connection optional)Compartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removingthe height-adjustable feetIncluded accessories: Drain tap and punched bottom plateNo container

Ext. dimensions: W. 800 x D. 700 x H. 850 / 900 (body height 700) mm Temperature range: 30°-85°CConnection value: 3.6 kW / 400 VItem No. 207638Price 2790.-

700

Prof

essi

onal


Elbow 90° with flexible stainless steel pipe 500- 1000 mm longFor self-installation

suitable for 207636 and 207638Item No. 209600Price 120.-

Bain-Marie700 Professional


LOCHER

Tel: +44 (0)118 957 1344

700

Prof

essi

onal

Electric bain-marie GN 1/1 with plate heater and fixed connection- --

---- - - --

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Basin GN 1/1-220 mm with punched bottom plateCompartment with convection plate heater, 1 hinged doorIndirect heating, no heater in basinEven temperature distributionStepless temperature control through thermostat Main switch with signal lamp Water tap and drain tap with fixed connectionCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: punched bottom plateNo container

Ext. dimensions: W. 400 x D. 700 x H. 850 / 900 (body height 700) mm Temperature range: 30°-85°CTemperature range in plate heating cabinet: up to 85°C (1.0 kW)Total connection value: 2.8 kW / 230 VItem No. 207640Price 3190.-


---- - - --

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Basin GN 2/1-220 mm with punched bottom plateCompartment with convection plate heater, 2 hinged doorsIndirect heating, no heater in basinEven temperature distributionStepless temperature control through thermostat Main switch with signal lamp Water tap and drain tap with fixed connectionCan be installed on a base (incl. solid base) by removingthe height-adjustable feetIncluded accessories: punched bottom plateNo container




LOCHER

www.cuisinequip.com

Electric bain-marie GN 1/1 right hand sidedwith plate heater and fixed connection- --

---- - - --

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Basin GN 1/1-220 mm with punched bottom plateCompartment with convection plate heater, 2 hinged doorsIndirect heating, no heater in basinEven temperature distributionStepless temperature control through thermostat Main switch with signal lamp Water tap and drain tap with fixed connectionCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: punched bottom plateNo container


Electric bain-marie GN 1/1 left hand sidedwith plate heater and fixed connection- --

---- - - --

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Basin GN 1/1-220 mm with punched bottom plateCompartment with convection plate heater, 2 hinged doorsIndirect heating, no heater in basinEven temperature distributionStepless temperature control through thermostat Main switch with signal lamp Water tap and drain tap with fixed connectionCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: punched bottom plateNo container


700

Prof

essi

onal



LOCHER

Tel: +44 (0)118 957 1344

700

Prof

essi

onal

Custom-made designs

Stepless junction system- Flush-mounted junction with invisible screw connection

Surcharge for every unit. Extends the appliance delivery time!Item No. 207995Price 398.-

Overhang or top folded down- -

Top folded down, left or right hand sideTop folded down in the back or extended overhang

Surcharge for every unit. Extends the appliance delivery time!Item No. 207990Price Upon request

Cover mask left- -

Material: CNS 18/10Required in connection with stepless junction system

Dimensions: Length 700 mmItem No. 207996Price 120.-

Cover mask right- -


Dimensions: Length 700 mm Item No. 207997Price 120.-

Standard junction system with clamping bar

Clamping bar 700- -



Junction systems700 Professional


LOCHER

www.cuisinequip.com

700

Prof

essi

onal














Optionals700 Professional


LOCHER

Tel: +44 (0)118 957 1344

700

Prof

essi

onal







Stainless steel cleaning sponge set- consists of 2 stainless steel cleaning sponges

Dim. : Ø ca. 80 mmWeight: 0,1 kgItem No. 209403Price 5,-



Connection piece- -

To connect two appliances, using one feet onlyDIY installation (Delivery without height-adjusteable foot)

Suitable for all appliances of Stand 700 / Stand 850Item No. 209920Price 95,-



LOCHER

www.cuisinequip.com

700

Prof

essi

onal


--

Design in CNS 18/10 20 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Compartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feet

Ext. dimensions: W. 400 x D. 700 x H. 850 / 900 (body height 700) mm Item No. 207900Price 1300.-


--

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Compartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removingthe height-adjustable feet



--

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Compartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feet


Lever mixer 3/4‘‘, pillar 100 mm- --

Swivel spout 360° with jet regulator and drip-stop300 mm reach, spout height 355mmPositioning only on neutral element ( without mounting)

Flow rate: 40 lt. / min (3 bar) Item No. 209930Price 649,-



Flow rate: 40 lt. / min (3 bar) Item No. 209931Price 698.-

Neutral elements700 Professional


LOCHER

Tel: +44 (0)118 957 1344

700

Prof

essi

onal

Neutral element 600- -

--




--




--




--



Custom made neutral element- -

--


Ext. dimensions: B. ? x T. 700 x H. 850 / 900 (body height 700) mm Item No. 207930Price Upon request

?



LOCHER

www.cuisinequip.com

700

Prof

essi

onal



















Doors700 Professional


LOCHER

Tel: +44 (0)118 957 1344

850 ProfessionalBy developing future-oriented technical advances in the field of cooking appliance technology we express our technical knowledge. The high quality and performance standard of the Stand 850 series represents the use of the products in high-end gastronomy, hotel industry, corporate and community catering.

Advantages:• Modular design• Large selection of compact free standing appliances• Appliance work top thickness 2 mm entirely from CNS 18/10• The appliances are joined by means of rounded clamping bars• Available in electric or gas• Suitable for installation on hollow or solid base• Optionally available: Preparation for energy optimisation or design in

H2 finishing

With Locher products you will always arrive at the right solution, whether individual appliance or cooking assembly, leaving the actual user completely happy and satisfied.


LOCHER

www.cuisinequip.com

Gas stove, 4 cooking zonesand electric oven GN 2/1- --

------ ---

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Deep moulded hob (approx. 65 mm), easy to cleanPilot flame burner with pilot flameGas shut-off valve in the front faceplate2 chrome-plated sliding grids over 2 cooking zones eachElectric oven GN 2/1 Separate control for top / bottom heat (50°-300°C) for optimal individual temperature controlFully removable baking tray support, for optimal and easy cleaningBuilt-in venting flap in the doorCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: 1 baking tray and 1 oven grid

Ext. dimensions: W. 800 x D. 850 x H. 850 / 900 (body height 700) mm Front left 'C' burner: 3.5 kW, Back left 'E' burner: 7.5 kW Front right 'D' burner: 5.5 kW, Back right 'D' burner: 5.5 kW Nominal heat output: 22.0 kW Gas, appliance set to natural gas H (G20) Connection value oven: 5.6 kW / 400 V electricalItem No. 208002Price 5990.-


------ ---

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Deep moulded hob (approx. 65 mm), easy to cleanPilot flame burner with pilot flameGas shut-off valve in the front faceplate3 chrome-plated sliding grids over 2 cooking zones eachElectric oven GN 2/1Separate control for top / bottom heat (50°-300°C) for optimal individual temperature controlFully removable baking tray support, for optimal and easy cleaningBuilt-in vventing flap in the doorCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: 1 baking tray and 1 oven grid

Ext. dimensions: W. 1200 x D. 850 x H. 850 / 900 (body height 700) mm Front left 'E' burner: 7.5 kW, Back left 'E' burner: 7.5 kW Front centre 'C' burner: 3.5 kW, Back centre 'E' burner: 7.5 kW Front right 'D' burner: 5.5 kW, Back right 'D' burner: 5.5 kW Nominal heat output: 37.0 kW Gas, appliance set to natural gas H (G20)Connection value oven: 5.6 kW / 400 V electricalItem No. 208004Price 6990.-

'C' burnerSingle crown 3.5 kW

'D' burnerDouble crown 5.5 kW

'E' burnerDouble crown 7.5 kW

850

Prof

essi

onal

Gas850 Professional


LOCHER

Tel: +44 (0)118 957 1344

850

Prof

essi

onal


------ ---

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Deep moulded hob (approx. 65 mm), easy to cleanPilot flame burner with pilot flameGas shut-off valve in the front faceplate2 chrome-plated sliding grids over 2 cooking zones eachElectric oven GN 2/1 Separate control for top / bottom heat (50°-300°C) for optimal individual temperature controlFully removable baking tray support, for optimal and easy cleaningBuilt-in venting flap in the doorCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: 1 baking tray and 1 oven grid

Ext. dimensions: W. 800 x D. 850 x H. 850 / 900 (body height 700) mm 4 x 'E' burner, 7.5 kW eachNominal heat output: 30.0 kW Gas, appliance set to natural gas H (G20) Connection value oven: 5.6 kW / 400 V electricalItem No. 208102Price 6190.-

Power


------ ---

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Deep moulded hob (approx. 65 mm), easy to cleanPilot flame burner with pilot flameGas shut-off valve in the front faceplate3 chromie-plated sliding grids over 2 cooking zones eachElectric oven GN 2/1Separate control for top / bottom heat (50°-300°C) for optimal individual temperature controlFully removable baking tray support, for optimal and easy cleaningBuilt-in vventing flap in the doorCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: 1 baking tray and 1 oven grid

Ext. dimensions: W. 1200 x D. 850 x H. 850 / 900 (body height 700) mm Front left 'E' burner: 7.5 kW, Back left 'E' burner: 7.5 kW Front centre 'D' burner: 5.5 kW, Back centre ‘D' burner: 5.5 kW Front right ‘E' burner: 7.5 kW, Back right 'E' burner: 7.5 kW Nominal heat output: 41.0 kW Gas, appliance set to natural gas H (G20)Connection value oven: 5.6 kW / 400 V electricalItem No. 208104Price 7190.-

Power

Gas850 Professional


LOCHER

www.cuisinequip.com

850

Prof

essi

onal

Gas stove, 4 cooking zonesand multifunctional oven GN 2/1- --

-----

--

--

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Deep moulded hob (approx. 65 mm), easy to cleanPilot flame burner with pilot flameGas shut-off valve in the front faceplate2 chrome-plated sliding grids over 2 cooking zones eachMultifunctional electric oven GN 2/1 with 8 functionsTop / bottom heat, bottom heat, top heat, grill, fan top/bottom heat, hot air, defrosting and cooling downOptimal temperature control from 50°-270°CBaking chamber with interior light with removable baking tray support, for optimal and easy cleaningGlass door with integrated venting flap and lightingCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: 1 baking tray and 1 oven grid

Ext. dimensions: W. 800 x D. 850 x H. 850 / 900 (body height 700) mm Front left 'C' burner: 3.5 kW, Back left 'E' burner: 7.5 kW Front right 'D' burner: 5.5 kW, Back right 'D' burner: 5.5 kW Nominal heat output: 22.0 kW Gas, appliance set to natural gas H (G20)Connection value oven: 5.6 kW / 400 V electricalItem No. 208007Price 6690.-


-----

--

--

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Deep moulded hob (approx. 65 mm), easy to cleanPilot flame burner with pilot flameGas shut-off valve in the front faceplate3 chrome-plated sliding grids over 2 cooking zones eachMultifunctional electric oven GN 2/1 with 8 functionsTop / bottom heat, bottom heat, top heat, grill, fan top/bottom heat, hot air, defrosting and cooling downOptimal temperature control from 50°-270°CBaking chamber with interior light with removable baking tray support, for optimal and easy cleaningGlass door with integrated venting flapCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: 1 baking tray and 1 oven grid

Ext. dimensions: W. 1200 x D. 850 x H. 850 / 900 (body height 700) mm Front left 'E' burner: 7.5 kW, Back left 'E' burner: 7.5 kW Front centre 'C' burner: 3.5 kW, Back centre 'E' burner: 7.5 kW Front right 'D' burner: 5.5 kW, Back right 'D' burner: 5.5 kW Nominal heat output: 37.0 kW Gas, appliance set to natural gas H (G20)Connection value oven: 5.6 kW / 400 V electricalItem No. 208008Price 7690.-

Gas850 Professional


LOCHER

Tel: +44 (0)118 957 1344

850

Prof

essi

onal


-----

--

--

-


Ext. dimensions: W. 800 x D. 850 x H. 850 / 900 (body height 700) mm 4 x ‘E’ burner, 7.5 kW eachNominal heat output: 30.0 kW Gas, appliance set to natural gas H (G20) Connection value oven: 5.6 kW / 400 V electricalItem No. 208105Price 6890.-

Power


-----

--

--

-


Ext. dimensions: W. 1200 x D. 850 x H. 850 / 900 (body height 700) mm Front left 'E' burner: 7.5 kW, Back left 'E' burner: 7.5 kW Front centre 'D' burner: 5.5 kW, Back centre ‘D' burner: 5.5 kW Front right ‘E' burner: 7.5 kW, Back right 'E' burner: 7.5 kW Nominal heat output: 41.0 kW Gas, appliance set to natural gas H (G20)Connection value oven: 5.6 kW / 400 V electricalItem No. 208106Price 7890.-

Power

Gas850 Professional


LOCHER

www.cuisinequip.com


------ -


Ext. dimensions: W. 400 x D. 850 x H. 850 / 900 (body height 700) mm Front 'C' burner: 3.5 kW Back 'E' burner: 7.5 kW Nominal heat output: 11.0 kW Gas, appliance set to natural gas H (G20)Item No. 208000Price 2890.-


----- -


Ext. dimensions: W. 800 x D. 850 x H. 850 / 900 (body height 700) mm Front left 'C' burner: 3.5 kW, Back left 'E' burner: 7.5 kWFront right 'D' burner: 5.5 kW, Back right 'D' burner: 5.5 kWNominal heat output: 22.0 kW Gas, appliance set to natural gas H (G20)Item No. 208001Price 4190.-


----- -


Ext. dimensions: W. 1200 x D. 850 x H. 850 / 900 (body height 700) mm Front left 'E' burner: 7.5 kW , Back left 'E' burner: 7.5 kW Front centre 'C' burner: 3.5 kW, Back centre 'E' burner: 7.5 kW Front right 'D' burner: 5.5 kW, Back right 'D' burner: 5.5 kW Nominal heat output: 37.0 kW Gas, appliance set to natural gas H (G20)Item No. 208003Price 5190.-

850

Prof

essi

onal

Gas850 Professional


LOCHER

Tel: +44 (0)118 957 1344

850

Prof

essi

onal


------ -


Ext. dimensions: W. 400 x D. 850 x H. 850 / 900 (body height 700) mm 2 x ‘E' burner, 7.5 kW each Nominal heat output: 11.0 kW Gas, appliance set to natural gas H (G20)Item No. 208100Price 2990.-

Power


----- -


Ext. dimensions: W. 800 x D. 850 x H. 850 / 900 (body height 700) mm 4 x 'E' burner, 7.5 kW eachNominal heat output: 30.0 kW Gas, appliance set to natural gas H (G20)Item No. 208101Price 4390.-

Power


----- -


Ext. dimensions: W. 1200 x D. 850 x H. 850 / 900 (body height 700) mm Front left 'E' burner: 7.5 kW, Back left 'E' burner: 7.5 kW Front centre 'D' burner: 5.5 kW, Back centre ‘D' burner: 5.5 kW Front right ‘E' burner: 7.5 kW, Back right 'E' burner: 7.5 kW Nominal heat output: 41.0 kW Gas, appliance set to natural gas H (G20)Item No. 208103Price 5390.-

Power

Gas850 Professional


LOCHER

www.cuisinequip.com

Sliding grid 851- -

Material: Chrome-plated steelFits one burner

Dim. : 390 x 360 mmWeight: 10 kgItem No. 208030Price 195.-


Material: Steel FE 510, 8 mm thicknessFits only ‘C’ 3,5 kW and ‘D’ 5,5 kW burner

Dim. : 390 x 360 mmWeight: 10 kgItem No. 208020Price 265,-

850

Prof

essi

onal

Baking tray GN 2/1- -

Material: SteelFits all GN 2/1 ovens


Oven grid GN 2/1- -

Material: Chrome-plated steelFits all GN 2/1 ovens


Wok Ring- --



Burner hob drain- ----

For all gas stovesWith removable overflow plug made of CNS18/10 that retains derisOne drain tap hole for each double hobWith piping into fixed water drain Design in CNS 18/10

Drain tap 3/4” Extends the appliance delivery time!Item No. 209000Price 580.-



LOCHER

Tel: +44 (0)118 957 1344

850

Prof

essi

onal

Induction stove, 4 cooking zones, 5 kW eachwith oven GN 2/1- -----------

---

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installation4 stepless power controller 1-9Pot detection / overheat protectionDigital display under ceran glassResidual heat indicator in displayFans integrated in the bottom of the applianceExchangeable aluminium grease filters (suitable for dish washers)Electric oven GN 2/1Separate control for top / bottom heat (50°-300°C) for optimal individual temperature controlFully removable baking tray support, for optimal and easy cleaningBuilt-in venting flap in the doorIncluded accessories: Aluminium grease filter, 1 baking tray and 1 oven grid

Ext. dimensions: W. 800 x D. 850 x H. 850 / 900 (body height 700) mm 4 square coils 270 x 270 mm, 5.0 kW eachOven GN 2/1, 5.6 kWCeran glass: W. 750 x D. 720 mm, thickness 6 mmConnection value: 25.6 kW / 400 VItem No. 208208Price 14990.-

Induction stove, 4 cooking zones, 5 kW eachwith multifunctional oven GN 1/2- ----------- -

-

--

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installation4 stepless power controller 1-9Pot detection / overheat protectionDigital display under ceran glassResidual heat indicator in displayFans integrated in the bottom of the applianceExchangeable aluminium grease filters (suitable for dish washers)Multifunctional electric oven GN 2/1 with 8 functionsTop / bottom heat, bottom heat, top heat, grill, fan top/bottom heat, hot air, defrosting and cooling downOptimal temperature control from 50°-270°CBaking chamber with interior light with removable baking tray support, for optimal and easy cleaningGlass door with integrated venting flapCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Aluminium grease filter, 1 baking tray and 1 oven grid

Ext. dimensions: W. 800 x D. 850 x H. 850 / 900 (body height 700) mm 4 square coils 270 x 270 mm, 5.0 kW eachBaking oven GN 2/1, 5.6 kWCeran glass: W. 750 x D. 720 mm, thickness 6 mmConnection value: 25.6 kW / 400 VItem No. 208209Price 16990.-



LOCHER

www.cuisinequip.com

850

Prof

essi

onal

Induction stove, 6 cooking zones, 5 kW eachand oven GN 2/1- -----------

-

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installation6 stepless power controller 1-9Pot detection / overheat protectionDigital display under ceran glassResidual heat indicator in displayFans integrated in the bottom of the applianceExchangeable aluminium grease filters (suitable for dish washers)Electric oven GN 2/1Separate ontrol for top / bottom heat (50°-300°C) for optimal individual temperature controlFully removable baking tray support, for optimal and easy cleaningBuilt-in venting flap in the doorIncluded accessories: Aluminium grease filter, 1 baking tray and 1 oven grate

Ext. dimensions: W. 1200 x D. 850 x H. 850 / 900 (body height 700) mm 6 square coils 270 x 270 mm, 5.0 kW eachOven GN 2/1, 5.6 kWCeran glass: W. 1150 x D. 720 mm, thickness 6 mmConnection value: 35.6 kW / 400 VItem No. 208210Price 18990.-

Induction stove, 6 cooking zones, 5 kW eachand multifunctional oven GN 2/1- ----------- -

-- --

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installation6 stepless power controller 1-9Pot detection / overheat protectionDigital display under ceran glassResidual heat indicator in displayFans integrated in the bottom of the applianceExchangeable aluminium grease filters (suitable for dish washers)Multifunctional electric oven GN 2/1 with 8 functionsTop / bottom heat, bottom heat, top heat, grill, fan top/bottom heat, hot air, defrosting and cooling downOptimal temperature control from 50°-270°CBaking chamber with interior light with removable baking tray support, for optimal and easy cleaningGlass door with integrated venting flapCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Aluminium grease filter, 1 baking tray and 1 oven grid

Ext. dimensions: W. 1200 x D. 850 x H. 850 / 900 (body height 700) mm 6 square coils 270 x 270 mm, 5.0 kW eachBaking oven GN 2/1, 5.6 kWCeran glass: W. 1150 x D. 720 mm, thickness 6 mmConnection value: 35.6 kW / 400 VItem No. 208211Price 19990.-



LOCHER

Tel: +44 (0)118 957 1344

850

Prof

essi

onal


-----------

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installation, edges rounded2 cooking zones in line2 stepless power controller 1-9Main switch with signal lamp Pot detection / overheat protectionDigital display under ceran glassResidual heat indicator in displayFans integrated in the bottom of the applianceExchangeable aluminium grease filter (can be washed in dish washer)Compartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Aluminium grease filter

Ext. dimensions: W. 400 x D. 850 x H. 850 / 900 (body height 700) mm 2 square coils 270 x 270 mm, 5.0 kW each Ceran glass: W. 350 x D. 720 mm, thickness 6 mmConnection value: 10.0 kW / 400 VItem No. 208200Price 6950.-


----------

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass, flush-mounted installation4 stepless power controller 1-9Main switch with signal lamp Pot detection / overheat protectionDigital display under ceran glassResidual heat indicator in displayFans integrated in the bottom of the applianceExchangeable aluminium grease filters (suitable for dish washers)Compartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Aluminium grease filter

Ext. dimensions: W. 800 x D. 850 x H. 850 / 900 (body height 700) mm 4 square coils 270 x 270 mm, 5.0 kW each Ceran glass: W. 750 x D. 720 x thickness 6 mmConnection value: 20.0 kW / 400 VItem No. 208201Price 10290.-



LOCHER

www.cuisinequip.com


----------

-


Ext. dimensions: W. 1200 x D. 850 x H. 850 / 900 (body height 700) mm 6 square coils 270 x 270 mm, 5.0 kW eachCeran glass: W. 1150 x D. 720 mm, thickness 6 mmConnection value: 30.0 kW / 400 VItem No. 208202Price 14990.-85

0 Pr

ofes

sion

al



LOCHER

Tel: +44 (0)118 957 1344

850

Prof

essi

onal

Induction stove, 2 cooking zones, 7 kW eachSurface induction- --

----------

-


Ext. dimensions: W. 400 x D. 850 x H. 850 / 900 (body height 700) mm 2 comprehensive covering coils 300 x 280 mm, 7.0 kW each Ceran glass: W. 350 x D. 720 x thickness 6 mmConnection value: 14.0 kW / 400 VItem No. 208203Price 7690.-


----------

-


Ext. dimensions: W. 800 x D. 850 x H. 850 / 900 (body height 700) mm 4 full coverage coils 300 x 300 mm, 7.0 kW each Ceran glass: W. 750 x D. 720 x thickness 6 mmConnection value: 28.0 kW / 400 VItem No. 208204Price 13990.-




LOCHER

www.cuisinequip.com







850

Prof

essi

onal


----------

-


Ext. dimensions: W. 1200 x D. 850 x H. 850 / 900 (body height 700) mm 6 full coverage coils 300 x 300 mm, 7.0 kW eachCeran glass: W. 1150 x D. 720 mm, thickness 6 mmConnection value: 42.0 kW / 400 VItem No. 208212Price 16990.-




LOCHER

Tel: +44 (0)118 957 1344

Induction stove, 1 wok cooking zone, 7 kW- --

----------

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Ceran glass bowl (Cuvette) flush-mounted installation from belowStepless power controller 1-9Main switch with signal lamp Pot detection / overheat protectionDigital display under ceran glassResidual heat indicator in displayFan integrated in the bottom of the applianceExchangeable aluminium grease filter (can be washed in dish washer)Compartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Aluminium grease filter

Ext. dimensions: W. 400 x D. 850 x H. 850 / 900 (body height 700) mm Ceran glass bowl (Cuvette): Ø 300 mm Connection value: 7.0 kW / 400 VItem No. 208285Price 5990.-

Wok pan- -



Wok pan- -



Wok pan- -



Wok pan- -



850

Prof

essi

onal



LOCHER

www.cuisinequip.com


--- --- --

-

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional) 1 heating zone with removable splash guardSmooth griddle, welded 20 mm recessed Surface made of special steel FE510, polished urface (can rust if not greased)Stepless temperature control through thermostatControl knob and signal lamp in the faceplateFat drain (125 x 35 mm) in removable grease drawerCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Removable splash guard, grease drawer, spatula and stainless steel cleaning spongeOptional: chrome-plated grid (375 x 180 mm) to be placed on the splash guard



--- -- --- - -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional) 2 separate heating zones with removable splash guardSmooth griddle, welded 20 mm recessed Surface made of special steel FE510, polished surface(can rust if not greased)Stepless temperature control through thermostatControl knob and signal lamp in the faceplateFat drain (125 x 35 mm) in removable grease drawerCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Removable splash guard, grease drawer, spatula and stainless steel cleaning spongeOptional: chrome-plated grid (575 x 180 mm) to be placed on the splash guard


850

Prof

essi

onal



LOCHER

Tel: +44 (0)118 957 1344


--- --- -- -

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional) 2 separate heating zones with removable splash guardSmooth griddle, welded 20 mm recessed Surface made of special steel FE510, polished surface (can rust if not greased)Stepless temperature control through thermostatControl knob and signal lamp in the faceplateFat drain (125 x 35 mm) in removable grease drawerCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Removable splash guard, grease drawer, spatula and stainless steel cleaning spongeOptional: chrome-plated grid (775 x 180 mm) to be placed on the splash guard


850

Prof

essi

onal



LOCHER

www.cuisinequip.com


--- --- --

-

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional) 2 separate heating zones with removable splash guardSmooth griddle, welded 20 mm recessed Surface made of special steel FE510, polished surface, ½ grooved (can rust if not greased)Stepless temperature control through thermostatControl knob and signal lamp in the faceplateFat drain (125 x 35 mm) in removable grease drawerCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Removable splash guard, grease drawer, spatula and stainless steel cleaning spongeOptional: chromium-plated grate (775 x 180 mm) for placing on the splash guard



--- --- --

-

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional) 2 separate heating zones with removable splash guardSmooth griddle, welded 20 mm recessed Surface made of special steel FE510, polished surface, ½ grooved (can rust if not greased)Stepless temperature control through thermostatControl knob and signal lamp in the faceplateFat drain (125 x 35 mm) in removable grease drawerCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removingthe height-adjustable feetIncluded accessories: Removable splash guard, grease drawer, spatula and stainless steel cleaning spongeOptional: chrome-plated grid (575 x 180 mm) to be placed on the splash guard


850

Prof

essi

onal



LOCHER

Tel: +44 (0)118 957 1344


---- -- ---

-

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)1 heating zone with removable splash guardSurface made of special steel, chrome-plated surfaceSmooth griddle, welded 20 mm recessed Aluminium block contact heater for excellent heat retention,and even temperature distributionStepless temperature control through thermostatControl knob and signal lamp in the faceplateFat drain (125 x 35 mm) in removable grease drawerCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Removable splash guard, grease drawer, spatula and stainless steel cleaning spongeOptional: chrome-plated grid (375 x 180 mm) to be placed on the splash guard



------- ---

-

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)2 separate heating zones with removable splash guardSurface made of special steel, chrome-plated surfaceSmooth griddle, welded 20 mm recessed Aluminium block contact heater for excellent heat retentionand even temperature distributionStepless temperature control through thermostatControl knob and signal lamp in the faceplateFat drain (125 x 35 mm) in removable grease drawerCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Removable splash guard, grease drawer, spatula and stainless steel cleaning spongeOptional: chromium-plated grate (575 x 180 mm) for placing on the splash guard

Ext. dimensions: W. 600 x D. 850 x H. 850 / 900 (body height 700) mmSurface: 520 x 670 mmTemperature range: 50°-250°CConnection value: 10.0 kW / 400 VItem No. 208401Price 5450.-

850

Prof

essi

onal



LOCHER

www.cuisinequip.com


------- ---

-

-



850

Prof

essi

onal



LOCHER

Tel: +44 (0)118 957 1344


---- -- ---

-

-




---- -- ---

-

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)2 separate heating zones with removable splash guardSurface made of special steel, chrome-plated surfaceSmooth griddle, welded 20 mm recessed Aluminium block contact heater for excellent heat retentionand even temperature distributionStepless temperature control through thermostatControl knob and signal lamp in the faceplateFat drain (125 x 35 mm) in removable grease drawerCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Removable splash guard, grease drawer, spatula and stainless steel cleaning spongeOptional: chromie-plated grid (775 x 180 mm) to be placed on the splash guard


850

Prof

essi

onal



LOCHER

www.cuisinequip.com


-- --- --

-

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Surface made of special compound stainless steel, smoothly welded Aluminium block contact heater for excellent heat retentionand even temperature distribution1 heating zone with stepless temperature control through thermostatControl knob and signal lamp in the faceplateRound drain tap (Ø 55 mm) with teflon plug and collection trayGN 1/1-150 in compartmentCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Teflon plug, collection tray GN 1/1-150, spatula and stainless steel cleaning spongeOptional: Removable CNS splash guard


Electric roasting pan 600- --

-- --- --

-

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Surface made of special compound stainless steel, smoothly welded Aluminium block contact heater for excellent heat retentionand even temperature distribution2 heating zones with stepless temperature control through thermostatsControl knob and signal lamp in the faceplateRound drain tap (Ø 55 mm) with teflon plug and collection trayGN 1/1-150 in compartmentCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Teflon plug, collection tray GN 1/1-150, spatula and stainless steel cleaning spongeOptional: Removable CNS splash guard


850

Prof

essi

onal



LOCHER

Tel: +44 (0)118 957 1344

Electric roasting pan 800- --

-- --- --

-

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Surface made of special compound stainless steel, smoothly welded Aluminium block contact heater for excellent heat retentionand even temperature distribution2 heating zones with stepless temperature control through thermostatsControl knob and signal lamp in the faceplateRound drain tap (Ø 55 mm) with teflon plug and collection trayGN 1/1-150 in compartmentCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Teflon plug, collection tray GN 1/1-150, spatula and stainless steel cleaning spongeOptional: Removable CNS splash guard


850

Prof

essi

onal











LOCHER

www.cuisinequip.com

850

Prof

essi

onal

Electric Bratt Pan GN 2/1with double skin hinged lid- -- - --- - -

-

Design in CNS 18/10, 20 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional) Surface made of special compound stainless steel, smoothly welded Aluminium block contact heater for excellent heat retentionand even temperature distribution2 heating zones with stepless temperature control through thermostatsControl knob and signal lamp in the faceplateRound drain tap (Ø 55 mm) with teflon plug and 2” ball valveCopartment closed on 3 sides, with collection tray GN 1/1-200 in extracta-ble drawer underneathCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Teflon plug, collection tray GN 1/1-200, spatula and stainless steel cleaning sponge

Ext. dimensions: W. 700 x D. 850 x H. 850 / 900 (body height 700) mmSurface: 630 x 510 mmInner pan height: 165 mmTemperature range: 60°-300°CConnection value: 9 kW / 400 VItem No. 208480Price 7590.-

Electric Multifunction Bratt Pan GN 2/1with double skin hinged lid- -- -- -

---

-

-

Design in CNS 18/10, 20 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional) Surface made of special compound stainless steel, smoothly welded Water tap with fixed connectionAluminium block contact heater for excellent heat retentionand even temperature distributionStepless temperature control through thermostat for:Griddle function with 2 independent heating zones Cooking function with one heating zone Control knob and signal lamp in the faceplateRound drain tap (Ø 55 mm) with teflon plug and 2" ball valveCopartment closed on 3 sides, with collection tray GN 1/1-200 in extracta-ble drawer underneathCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Teflon plug, collection tray GN 1/1-200, spatula and stainless steel cleaning sponge

Ext. dimensions: W. 700 x D. 850 x H. 850 / 900 (body height 700) mmSurface: mmInner pan height: 165 mmTemperature range: 60°-300°CConnection value: 13.8 kW / 400 VItem No. 208481Price 8690.-

Cleaning water direct drain- Connection to fixed water drain required

For multi cooking device Extends the appliance delivery time!Item No. 209440Price 1250.-

Multi purpose bratt pan850 Professional


LOCHER

Tel: +44 (0)118 957 1344

Custom-made designs

850

Prof

essi

onal

Clamping bar 850- -



Standard junction system with clamping bar

Stepless junction system- Flush-mounted junction with invisible screw connection

Surcharge for every unit. Extends the appliance delivery time!Item No. 208995Price 450.-

Overhang or top folded down- -

Top folded down, left or right hand sideTop folded down in the back or extended overhang

Surcharge for every unit. Extends the appliance delivery time!Item No. 208990Price Upon request

Cover mask left- -


Dimensions: Length 700 mmItem No. 208996Price 120.-

Cover mask right- -


Dimensions: Length 700 mm Item No. 208997Price 120.-

Junction systems850 Professional


LOCHER

www.cuisinequip.com


---- - - --

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Removable anti-stick cast iron grids1 heating zone with stepless temperature control through thermostatControl knob and signal lamp in the faceplateHeating elements can be completely swivelled and locked out of the fat tank (cuts power supply) for easy cleaningFat tank with drain incl. 1" ball valve in compartmentFat tank can be filled with water for easier cleaning (tank depth approx. 150 mm)Compartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: spatula and cleaning sponge



---- - - --

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional) Removable anti-stick cast iron grids2 heating zones with Stepless temperature control through thermostatControl knob and signal lamp in the faceplateHeating elements can be completely swivelled and locked out of the fat tank (cuts power supply) for easy cleaningFat tank with drain incl. 1” ball valve in compartmentFat tank can be filled with water for easier cleaning (tank depth approx. 150 mm)Compartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Turning spatula and cleaning sponge


850

Prof

essi

onal

Clamping bar 850- -





LOCHER

Tel: +44 (0)118 957 1344

850

Prof

essi

onal


---- - --- -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional) Removable anti-stick cast iron grids1 heating zone with stepless temperature control through thermostatControl knob and signal lamp in the faceplateUpper heating elements can be completely swivelled and locked out (cuts off power supply)Lower heating elements rigidly installed beneath the lava stonesCollecting drawer removableCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: spatula and cleaning sponge



----- --- -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional) Removable anti-stick cast iron grids2 heating zones with stepless temperature control through thermostatsControl knob and signal lamp in the faceplateUpper heating elements can be completely swivelled and locked out (cuts off power supply)Lower heating elements rigidly installed beneath the lava stonesCollecting drawer removableCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: spatula and cleaning sponge




Steak Grill Rustica Lava850 Professional


LOCHER

www.cuisinequip.com

850

Prof

essi

onal


----- - - - -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Heating through heater inside the basinHeating elements can be completely swivelled and locked out of the basin (cuts power supply) for easy cleaningElectronically controlled temperature regulation with melting stageOperating knob, power and heat indicator in faceplateDrain tap through ball valve 1“ in compartment (Grease container optional)Compartment closed on 3 sides, open in the front (door optional)Can be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Ball valve, basket, lid and protection grid forthe heater

Ext. dimensions: W. 300 x D. 850 x H. 850 / 900 (body height 700) mm Total filling capacity/basin: 12 litresOperating capacity / basin: 8 litresBasket size: W. 230 x D. 280 x H. 100 mmTemperature range: 50°-185°C + melting stageConnection value: 8.0 kW / 400 VItem No. 208500Price 2990.-

With reinforced heating: 10 kW Item No. 208510Price 3190.-


----- - - -

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Heating through heater inside the basinHeating elements can be completely swivelled and locked out of the basin (cuts power supply) for easy cleaningElectronically controlled temperature regulation with melting stageOperating knob, power and heat indicator in faceplateDrain tap through ball valve 1“ in compartment (Grease container optional)Compartment closed on 3 sides, open in the front (door optional)Can be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Ball valve, basket, lid and protection grid for the heater

Ext. dimensions: W. 400 x D. 850 x H. 850 / 900 (body height 700) mm Total filling capacity/basin: 20 litresOperating capacity / basin: 16.5 litresBasket size: W. 290 x D. 280 x H. 120 mmTemperature range: 50°-185°C + melting stageConnection value: 16.5 kW / 400 VItem No. 208501Price 4290.-



LOCHER

Tel: +44 (0)118 957 1344

850

Prof

essi

onal


----- - - - -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Heating through heater inside the basinHeating elements can be completely swivelled and locked out of the basin (cuts power supply) for easy cleaningElectronically controlled temperature regulation with melting stageOperating knob, power and heat indicator in faceplateDrain tap through ball valve 1“ in compartment (Grease container optional)Compartment closed on 3 sides, open in the front (door optional)Can be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: 2 ball valves, 2 baskets, 2 lids and 2 protection grids for the heater


With reinforced heating: 2 x 8 kW Item No. 208512Price 4790.-


----- - - -

-






LOCHER

www.cuisinequip.com

Oil filter kit for deep fryer with 1 basin- -----

-

Material CNS 18/10, no retrofitting possibleGrease collection container with removable s/s and cloth filterCapacity 20 lt.Base plate with oil pump and connection hose to oil tankRigid oil recirculation pipe with quick coupling connector to the basinHose with quick coupling connector for disposal of used oil in external containerSaves up to 40-50% of oil if regularly used


Oil filter kit for deep fryer with 2 basins- ----

-

Grease collection container with 2 removable s/s and cloth filtersCapacity 20 lt.Base plate with oil pump and connection hose to oil tankRigid oil recirculation pipe with quick coupling connector to the basinHose with quick coupling connector for disposal of used oil in external containerSaves up to 40-50% of oil if regularly used


850

Prof

essi

onal


----- - - -

-


Ext. dimensions: W. 800 x D. 850 x H. 850 / 900 (body height 700) mm Total filling capacity/basin: 20 litresUsable filling capacity / basin: 16.5 litresBasket size: 2 x W. 290 x D. 280 x H. 120 mmTemperature range: 50°-185°C + melting stageConnection value: 33.0 kW / 400 VItem No. 208511Price 6690.-



LOCHER

Tel: +44 (0)118 957 1344

Small grease collection container- Material: CNS 18/10, capacity 12 lt.

Dim. : 130 x 550 x 180 mmWeght: 1,4 kgItem No. 209552Price 215,-

Large grease collection container- Material: CNS 18/10, capacity 25 lt.


850

Prof

essi

onal














LOCHER

www.cuisinequip.com


- --- -- --

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Cooking basin GN 1/1-220 mm with punched bottom plate and dripping plateIndirect heating, no heater in basinEven temperature distributionMain switch (3 power levels) with signal lampStepless temperature control through thermostat Water tap and drain tap with fixed connection Compartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removingthe height-adjustable feetIncluded accessories: Dripping plate, punched bottom plateNo containers and no baskets

Ext. dimensions: W. 700 x D. 850 x H. 850 / 900 (body height 700) mmTemperature range: 50° – 110°CConnection value: 12.0 kW / 400 VItem No. 208601Price 4990.-


- -- - - ---

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Cooking basin GN 1/1-220 mm with punched bottom plate and dripping plateIndirect heating, no heater in basinEven temperature distributionMain switch (3 power levels) with signal lampStepless temperature control through thermostat Water tap and drain tap with fixed connection Compartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removingthe height-adjustable feetIncluded accessories: Dripping plate, punched bottom plateNo containers and no baskets

Ext. dimensions: W. 400 x D. 850 x H. 850 / 900 (body height 700) mmTemperature range: 50° – 110°CConnection value: 12.0 kW / 400 VItem No. 208600Price 4490.-


Material CNS 18/10Consists of 4 baskets GN 1/6 and 1 basket GN 1/3

Dim. : 4 x 143 x 163 x 230 mm + 1 x 298 x 163 x 230 mmItem No. 209631Price 580,-

850

Prof

essi

onal

Pasta Cookers850 Professional


LOCHER

Tel: +44 (0)118 957 1344

850

Prof

essi

onal




Electric Cooker GN 1/1 - --

----- - -- -

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Cooking basin GN 1/1-220 mm with punched bottom plateIndirect heating, no heater in basinEven temperature distributionStepless temperature control through thermostat Main switch (3 power levels) with signal lamp Water tap with fixed connectionWater drain tap through ball valve 1“ in compartmentCompartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Drain tap and punched bottom plateNo container

Ext. dimensions: W. 400 x D. 850 x H. 850 / 900 (body height 700) mm Temperature range: 50° – 110°CConnection value: 7.0 kW / 400 VItem No. 208675Price 3890.-




Elbow 90° with flexible stainless steel pipe 500- 1000 mm longSuitable for 208675, DIY installation

Item No. 209600Price 120.-

Electronic water level control with automatic refill-

-

Electronic control of the water level of the basin with automatic refill tapSuitable for pasta cooker 207600 and 207601Extends the appliance delivery time!

Item No. 209650Price 1100,-

Cooker & Accessories850 Professional


LOCHER

www.cuisinequip.com
















850

Prof

essi

onal



LOCHER

Tel: +44 (0)118 957 1344

850

Prof

essi

onal


---- - --

--

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Basin GN 1/1-220 mm with punched bottom plateIndirect heating, no heater in basinEven temperature distributionStepless temperature control through thermostat Main switch with signal lamp Water tap with fixed connectionWater drain tap through ball valve ¾“ in compartment(Connection set to fixed water connection optional)Compartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: Ball valve and punched bottom plateNo container



--- - - - -

- - -

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Basin GN 2/1-220 mm with punched bottom plateIndirect heating, no heater in basinEven temperature distributionStepless temperature control through thermostat Main switch with signal lamp Water tap with fixed connection Water drain tap through ball valve ¾“ in compartment(Connection set to fixed water connection optional)Compartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removingthe height-adjustable feetIncluded accessories: Ball valve and punched bottom plateNo container



Elbow 90 ° with flexible stainless steel pipe 500- 1000 mm longDIY installation

Suitable for 208636 and 208638Item No. 209600Price 120.-



LOCHER

www.cuisinequip.com

850

Prof

essi

onal


---- - - --

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Basin GN 1/1-220 mm with punched bottom plateCompartment with convection plate heater, 1 hinged doorIndirect heating, no heater in basinEven temperature distributionStepless temperature control through thermostat Main switch with signal lamp Water tap and drain tap with fixed connectionCan be installed on a base (incl. solid base) by removing the height-adjustable feetIncluded accessories: punched bottom plateNo container

Ext. dimensions: W. 400 x D. 850 x H. 850 / 900 (body height 700) mm Temperature range: 30° – 85°CTemperature range in plate heating cabinet: up to 85°C (1.0 kW)Total connection value: 3.6 kW / 230 VItem No. 208640Price 3690.-

Electric bain-marie GN 2/1 with plate heating cabinet and fixed connection- --

---- - - --

-



Clamping bar 850- -





LOCHER

Tel: +44 (0)118 957 1344

850

Prof

essi

onal

Electric bain-marie GN 1/1 right hand sidedwith plate heater and fixed connection- --

---- - - --

-

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Basin GN 1/1-220 mm with punched bottom plateCompartment with convection plate heater, 2 hinged doorsIndirect heating, no heater in basinEven temperature distributionStepless temperature control through thermostat Main switch with signal lamp Water tap and drain tap with fixed connectionCan be installed on a base (incl. solid base) by removingthe height-adjustable feetIncluded accessories: punched bottom plate No container


Electric bain-marie GN 1/1 left hand sidedwith plate heater and fixed connection- --

---- - - --

-





LOCHER

www.cuisinequip.com

850

Prof

essi

onal














Optionals850 Professional


LOCHER

Tel: +44 (0)118 957 1344

850

Prof

essi

onal







Connection piece- -

To connect two appliances, using one feet onlyDIY installation (Delivery without height-adjusteable foot)

Suitable for all appliances of Stand 700 / Stand 850Item No. 209920Price 95,-



Flow rate: 40 lt. / min (3 bar) Item No. 209930Price 649,-


Swivel spout 360° with jet regulator and drip-stop300 mm reach, spout height 555mmPositioning only on neutral element ( without mounting

Flow rate: 40 lt. / min (3 bar) Item No. 209931Price 698.-



LOCHER

www.cuisinequip.com


--




--

Design in CNS 18/1020 mm overhang in the backOverhang on left and right side for clamping bar application(clamping bar optional)Compartment closed on 3 sides, open in the frontCan be installed on a base (incl. solid base) by removingthe height-adjustable feet



--




--



850

Prof

essi

onal



LOCHER

Tel: +44 (0)118 957 1344


--




--




--



850

Prof

essi

onal

Custom made neutral element- ----


Ext. dimensions: B. ? x T. 850 x H. 850 / 900 (body height 700) mm Item No. 208930Price Upon request

?



LOCHER

www.cuisinequip.com



















850

Prof

essi

onal

Doors850 Professional


LOCHER

Tel: +44 (0)118 957 1344

Induction stove "Compact"1 cooking zone, 5.0 kW---------

Housing design in CNS 18/10Ceran glass, flush-mounted installationPot detection / overheat protectionStepless power controller 1-9 Digital display under ceran glassResidual heat indicator in displayFans integrated in the bottom of the applianceExchangeable aluminium grease filter (can be washed in dish washer)Included accessories: Supply line with CEE plug and aluminium grease filter

Ext. dimensions: W. 340 x D. 405 x H. 120 incl. feetRound coil Ø 210 mm 5.0 kWCeran glass: 290 x 290 mmConnection value: 5.0 kW / 400 VItem No. 201205Price 1690.-

Induction stove "Compact"1 cooking zone, 2.5 kW- --------

Housing design in CNS 18/10Ceran glass, flush-mounted installationPot detection / overheat protectionStepless power controller 1-9 Digital display under ceran glassResidual heat indicator in displayFans integrated in the bottom of the applianceExchangeable aluminium grease filter (can be washed in dish washer)Included accessories: Supply line with plug and Aluminium grease filter

Ext. dimensions: W. 340 x D. 405 x H. 110 mm incl. feetRound coil Ø 210 mm 2.5 kWCeran glass: 290 x 290 mmConnection value: 2.5 kW / 230 VItem No. 201202Price 999.-

Induction stove "Compact" 1 cooking zone, 3.5 kW- --------



InductionProfessional Chef Series

Indu

ctio

n


LOCHER

www.cuisinequip.com

Induction stove 1 cooking zone, 3.5 kW- --------



Induction stove1 cooking zone, 5.0 kW- --------

Housing design in CNS 18/10Ceran glass, flush-mounted installationPot detection / overheat protectionStepless power controller 1-9 Digital display under ceran glassResidual heat indicator in displayFans integrated in the bottom of the applianceExchangeable aluminium grease filter (can be washed in dish washer)Included accessories: Supply line with CEE plug and Aluminium grease filter


Wok pan adapter- -

Design in CNS 18/10suitable for induction stove: 201213, 201215

Ext. dimensions: W. 400 x D. 400 x H. 60 mm Weight: 1.8 kgItem No. 209202Price 235.-

Wok pan adapter- -

Design in CNS 18/10suitable for induction stove "Compact": 201202, 201203, 201205

Ext. dimensions: W. 340 x D. 340 x H. 60 mm Weight: 1.8 kgItem No. 209201Price 220.-

InductionProfessional Chef Series

Indu

ctio

n


LOCHER

Tel: +44 (0)118 957 1344

Induction stove2 cooking zones, 3.5 kW each- --------

Housing design in CNS 18/10Ceran glass, flush-mounted installationPot detection / overheat protectionStepless power controller 1-9 Digital display under ceran glassResidual heat indicator in displayFans integrated in the bottom of the applianceExchangeable aluminium grease filter (can be washed in dish washer)Included accessories: Supply line with CEE plug and aluminium filter

Ext. dimensions: W. 400 x D. 655 x H. 120 mm incl. feet2 round coils Ø 230 mm, 3.5 kW eachCeran glass: 350 x 560 mmConnection value: 7.0 kW / 400 VItem No. 201223Price 3650.-

Induction wok "Compact “ 3.5 kW- --------

Housing design in CNS 18/10Ceran glass bowl (cuvette) flush-mounted installation from belowPot detection / overheat protectionStepless power controller 1-9 Digital display under ceran glassResidual heat indicator in displayFans integrated in the bottom of the applianceExchangeable aluminium grease filter (can be washed in dish washer)Included accessories: Supply line with plug and aluminium grease filter. Delivery without pan

Ext. dimensions: W. 330 x D. 380 x H. 175 mm incl. feetRound coil Ø 300 mm 3.5 kWCeran glass bowl (Cuvette): Ø 300 mm Connection value: 3.5 kW / 230 VItem No. 201280Price 1540.-

Induction

Induction stove "1 + 1"2 cooking zones, 1.8 kW each or 1 x 3,5 kW- ---------

Housing design in CNS 18/10Ceran glass, flush-mounted installationPower functionPot detection / overheat protection2 Stepless power controller 1-9 Digital display under ceran glassResidual heat indicator in displayFans integrated in the bottom of the applianceExchangeable aluminium grease filter (can be washed in dish washer)Included accessories: Supply line with plug and Aluminium grease filter

Ext. dimensions: W. 340 x D. 585 x H. 110 mm incl. feet2 x 1.8 kW per cooking zone or 3.5 kW on the front if used singularly 2 round coils Ø 210 mm, 1.8 kW eachCeran glass: 290 x 475 mm Connection value: 3.5 kW / 230 VItem No. 201222Price 1390.-


Indu

ctio

n


LOCHER

www.cuisinequip.com

Induction wok, 3.5 kW- --------

Housing design in CNS 18/10Ceran glass bowl (cuvette) flush-mounted installation from belowPot detection / overheat protectionStepless power controller 1-9 Digital display under ceran glassResidual heat indicator in displayFans integrated in the bottom of the applianceExchangeable aluminium grease filter (can be washed in dish washer)Included accessories: Supply line with plug and aluminium grease filter. Delivery without pan

Ext. dimensions: W. 400 x D. 455 x H. 180 mm incl. feetRound coil Ø 300 mm 3.5 kWCeran glass bowl (Cuvette): Ø 300 mm Connection value: 3.5 kW / 230 VItem No. 201281Price 2090.-

Induction wok, 5 kW- --------

Housing design in CNS 18/10Ceran glass bowl (cuvette) flush-mounted installation from belowPot detection / overheat protectionStepless power controller 1-9 Digital display under ceran glassResidual heat indicator in displayFans integrated in the bottom of the applianceExchangeable aluminium grease filter (can be washed in dish washer)Included accessories: Supply line with CEE plug and aluminium grease filter. Delivery without pan

Ext. dimensions: W. 400 x D. 455 x H. 180 mm incl. feetRound coil Ø 300 mm 5 kWCeran glass bowl (Cuvette): Ø 300 mm Connection value: 5.0 kW / 400 VItem No. 201282Price 2690.-

Induction wok, 7 kW- --------

Housing design in CNS 18/10Ceran glass bowl (cuvette) flush-mounted installation from belowPot detection / overheat protectionStepless power controller 1-9 Digital display under ceran glassResidual heat indicator in displayFans integrated in the bottom of the applianceExchangeable aluminium grease filter (can be washed in dish washer)Included accessories: Supply line with CEE plug and aluminium grease filter. Delivery without pan

Ext. dimensions: W. 400 x D. 455 x H. 180 mm incl. feetRound coil Ø 300 mm 7 kWCeran glass bowl (Cuvette): Ø 300 mm Connection value: 7.0 kW / 400 VItem No. 201283Price 2940.-

Induction

Indu

ctio

n



LOCHER

Tel: +44 (0)118 957 1344

Induction stove2 cooking zones, 3.5 kW each- --------

Housing design in CNS 18/10Ceran glass, flush-mounted installationPot detection / overheat protectionStepless power controller 1-9 Digital display under ceran glassResidual heat indicator in displayFans integrated in the bottom of the applianceExchangeable aluminium grease filter (can be washed in dish washer)Included accessories: Supply line with CEE plug and Aluminium grease filter

Ext. dimensions: W. 400 x D. 600 x H. 200 mm incl. feet2 round coils Ø 230 mm, 3.5 kW eachCeran glass: 350 x 560 mmConnection value: 7.0 kW / 400 VItem No. 201227Price 3990.-


Housing design in CNS 18/10Ceran glass bowl (cuvette) flush-mounted installation from belowPot detection / overheat protectionStepless power controller 1-9 Digital display under ceran glassResidual heat indicator in displayFan integrated in the bottom of the applianceExchangeable aluminium grease filter (can be washed in dish washer)Included accessories: Supply line with CEE plug and aluminium grease filter. Delivery without pan

Ext. dimensions: W. 400 x D. 600 x H. 200 mm incl. feet Round coil Ø 300 mm 5.0 kWCeran glass bowl (Cuvette): Ø 300 mm Connection value: 5.0 kW / 400 VItem No. 201289Price 3490.-


Housing design in CNS 18/10Ceran glass bowl (cuvette) flush-mounted installation from belowPot detection / overheat protectionStepless power controller 1-9 Digital display under ceran glassResidual heat indicator in displayFan integrated in the bottom of the applianceExchangeable aluminium grease filter (can be washed in dish washer)Included accessories: Supply line with plug and aluminium grease filter. Delivery without pan

Ext. dimensions: W. 400 x D. 600 x H. 200 mm incl. feet Round coil Ø 300 mm 3.5 kWCeran glass bowl (Cuvette): Ø 300 mm Connection value: 3.5 kW / 230 VItem No. 201288Price 2990.-

Induction

Indu

ctio

n



LOCHER

www.cuisinequip.com

Induction stock pot, 9 kW- --------

Housing design in CNS 18/10Stepless power controller 1-9Pot detection and overheat protectionPower and residual heat indicator in displayFan integrated in the bottom of the applianceExchangeable aluminium grease filters (suitable for dish washers)Suitable for pots of up to 70 litres (minimum size Ø 240 mm)Feet adjustable in height up to 735 mm,Included accessories: Supply line with CEE plug and aluminium grease filter

Ext. dimensions: W. 480 x D. 480 x H. 465 mmRound coil: 350 mmCeran glass: 468 x 468 mmConnection value: 9.0 kW / 400 VItem No. 201250Price 3990.-

Induction stock pot, 9 kW, on wheels- -------

-

Housing design in CNS 18/10Stepless power controller 1-9Pot detection and overheat protectionPower and residual heat indicator in displayFan integrated in the bottom of the applianceExchangeable aluminium grease filters (suitable for dish washers)Suitable for pots of up to 70 litres (minimum size Ø 240 mm)Feet adjustable in height up to 735 mm with 4 pivoting wheels, (2 with brake)Included accessories: Supply line with CEE plug and aluminium grease filter

Ext. dimensions: W. 480 x D. 520 x H. 535 (with handle 860-1060) mm Round coil: 350 mmCeran glass: 468 x 468 mmConnection value: 9.0 kW / 400 VItem No. 201251Price 4290.-

Electric stock pot, 5 kW- ------

Housing design in CNS 18/101 cast-iron hob Ø 400 mmMain switch (3 power levels) with signal lampOverheat protectionWaste collection drawer for easy cleaningFeet adjustable in hightIncluded accessories: Supply line with CEE plug

Ext. dimensions: W. 550 x D. 550 x H. 500 mmConnection value: 5.0 kW / 400 VItem No. 201835Price 1190.-

Electric stock pot

Elec

tric

sto

ck p

ots



LOCHER

Tel: +44 (0)118 957 1344

Gas stock pot, 10.0 kW- ---

Design in stainless steelBurner pot with 10 kW connectionPiezo ignitionIncluding controller, gas hose attached ( not installed )

Ext. dimensions: W. 400 x D. 400 x H. 440 mmConnection value: 10.0 kW gas / device set to liquid gasWeight: 7 kgItem No. 152010Price 255.-







Extension feet for stock pot- 4 feet with intermediate shelf (working height approx. 800 mm)

Stock pot 152010 152014 152020Item No. 152910 152914 152920Price 125.- 125.- 125.-

Gas stock pot

Gas

sto

ck p

ots



LOCHER

www.cuisinequip.com

Hot Star

Hot cabinet LHS- -------

Housing design in CNS 18/10Precise temperature adjustment through touch control panelwith digital displayTemperature adjustable in „C°“-stepsFront and back venting flapHandles positioned on the sidesHinged door right hand sided (door hinge can be switched)Included accessories: Supply line with heat resistant plug and removable tray support for GN 1/1 container

Ext. dimensions: W. 400 x D. 650 x H. 390 mmInner dimensions: W. 350 x D. 570 x H. 285 mmCapacity: 4 x GN 1/1-65 mmTemperature range 30°-130°CConnection value: 1.5 kW / 230 VItem No. 301710Price 2390.-

Hot drawer LHSL- ------

Housing design in CNS 18/10With drawer GN 1/1 - 150 mmPrecise temperature adjustment through touch control panelwith digital displayTemperature adjustable in „C°“-stepsFront and back venting flapHandles positioned on the sidesIncluded accessories: Supply line with heat resistant plug


Hot cabinet with core probe for slow cooking features LHSK --

-- --- --

Housing design in CNS 18/10Precise temperature adjustment through touch control panelwith digital displayElectronic temperature monitoring with core temperature probeTemperature adjustable in „C°“-steps10 OEM-set programs for keeping warm and slow cookingFront and back venting flapHandles positioned on the sidesHinged door right hand sided (door hinge can be switched)Included accessories: Supply line with heat resistant plug and removable tray support for GN 1/1 container


Professional Chef SeriesH

ot S

tar


LOCHER

Tel: +44 (0)118 957 1344

Radiant warmers Ø 175 mm, chrome LT25R- --

With base plate, height approx. 700 mmOn/Off power switch on the housing Design: with infrared lamp

Connection value: 0.25 kW / 230 VItem No. 122300Price 495.-

Radiant warmers Ø 190 mm, aluminium LV25R- --

Suspended, adjustable from 850 – 1900 mmOn/Off power switch on the housing Design: with infrared lamp


Radiant warmers Ø 225 mm, copper LR25R- --



Radiant warmers Ø 225 mm, chrome LC25R- --



Radiant warmers Ø 225 mm, aluminium LA25R- --



Heat lampsProfessional Chef Series

Hea

t La

mps


LOCHER

www.cuisinequip.com

Electric griddle 400 chrome-plated, smooth surface- --

----

Housing design in CNS 18/10Surface made of special steel, chrome-plated surfaceAluminium block contact heater for excellent heat retentionand even temperature distributionFat drain 125 x 35 mm in removable drawerStepless temperature control through thermostatControl knob and signal lamp in the faceplateIncl. supply line with plug, removable splash guard,Grease drawer, spatula and stainless steel cleaning sponge

Ext. dimensions: W. 400 x D. 600 x H. 200 mmSurface: 320 x 520 mmTemperature range: 50°-250°CConnection value: 3.3 kW / 230 VItem No. 201400Price 2690.-

With reinforced heating: 4.5 kW 400 VItem No. 201403Price 2690.-


----

Housing design in CNS 18/10Surface made of special steel, chrome-plated surfaceAluminium block contact heater for excellent heat retentionand even temperature distributionFat drain 125 x 35 mm in removable drawer2 heating zones, stepless temperature control through 2 thermostatsControl knob and signal lamp in the faceplateIncl. supply line with CEE plug, removable splash guard,Grease drawer, spatula and stainless steel cleaning sponge


Electric griddle 600 chrome-plated, smooth surface- -- ----



Gri

ddle

s

GriddlesProfessional Chef Series


LOCHER

Tel: +44 (0)118 957 1344

Gri

ddle

s


----

Housing design in CNS 18/10Surface made of special steel, chrome-plated surfaceAluminium block contact heater for excellent heat retentionand even temperature distributionFat drain 125 x 35 mm in removable drawerStepless temperature control through thermostatControl knob and signal lamp in the faceplateIncl. supply line with plug, removable splash guard,Grease drawer, spatula and stainless steel cleaning sponge


With reinforced heating: 4.5 kW 400 VItem No. 201413Price 3090.-

Electric griddle 600 chrome-plated, ½ grooved- --

----



Electric griddle 800 chrome-plated, ½ grooved- -- ----



GriddlesProfessional Chef Series


LOCHER

www.cuisinequip.com

Electric Asia griddle Teppanyaki, 2 heating zones- ---

-- -

Housing design in CNS 18/10Surface made of special steel, chrome-plated surface2 separate heating zones Aluminium block contact heater for excellent heat retentionand even temperature distributionFat drain 125 x 35 mm in removable drawerStepless temperature control through thermostatControl knob and signal lamp in the faceplateIncluded accessories: Supply line with CEE plug, grease drawer, spatula and stainless steel cleaning sponge

Ext. dimensions: W. 600 x D. 600 x H. 200 mmSurface: 520 x 520 mmTemperature range: 50°-250°C Connection value: 7.5 kW / 400 VItem No. 201420Price 3790.-

Electric Asia griddle Teppanyaki, 3 heating zones- --- -- --

Housing design in CNS 18/10Surface made of special steel, chrome-plated surface3 separate heating zones Aluminium block contact heater for excellent heat retentionand even temperature distributionFat drain 125 x 35 mm in removable drawerStepless temperature control through thermostatControl knob and signal lamp in the faceplateIncluded accessories: Supply line with CEE plug 32 A, grease drawer, spatula and stainless steel cleaning sponge

Ext. dimensions: W. 1200 x D. 600 x H. 200 mmSurface: 1120 x 520 mmTemperature range 50°-250°CConnection value: 16.5 kW / 400 VItem No. 201421Price 5880.-

Electric Asia griddle Teppanyaki, 3 heating zones- --- -- --

Housing design in CNS 18/10Surface made of special steel, chrome-plated surface3 separate heating zones Aluminium block contact heater for excellent heat retentionand even temperature distributionFat drain 125 x 35 mm in removable drawerStepless temperature control through thermostatControl knob and signal lamp in the faceplateIncluded accessories: Supply line with CEE plug 32 A, grease drawer, spatula and stainless steel cleaning sponge

Ext. dimensions: W. 1400 x D. 600 x H. 200 mmSurface: 1320 x 520 mmTemperature range 50°-250°CConnection value: 18.0 kW / 400 VItem No. 201422Price 6450.-

Tepp

anya

ki

TeppanyakiProfessional Chef Series


LOCHER

Tel: +44 (0)118 957 1344

Brat

t Pa

n

Splash guard bratt pan 400- Material: Stainless steel CNS 18/10

Dimensions: 400 x 600 x 120 mmWeight: 2.0 kgItem No. 209450Price 215.-

Bratt Pan

Splash guard Teppanyaki- -

Material: Stainless steel CNS 18/10Removable, fits griddles Teppanyaki600, 1200 and 1400 mm

Item No. 209453 209454 209455Griddle w 600 mm 1200 mm 1400Weight in kg 2.8 4.8 5.8Price 310.- 450.- 520.-



Electric bratt pan 400- --- - ---

-

Housing design in CNS 18/10Griddle made of special compound stainless steelInner pan hight 60 mmAluminium block contact heater for excellent heat retentionand even temperature distributionDrain tap round (Ø 55 mm) with teflon plug in removable grease drawerStepless temperature control through thermostatControl knob and signal lamp in the faceplateIncluded accessories: Supply line with CEE plug Teflon plug, grease and drain drawer, spatula and stainless steel cleaning spongeOptional: Splash guard CNS, removable




LOCHER

www.cuisinequip.com

Gri

ddle

Griddle

Electric griddle smooth LFT1L ---

Housing made of CNS 18/10 Surface made of stainless steel 1 heating zone with removable grease drip tray

Ext. dimensions: W. 400 x D. 500 x H. 200 mmGrill plate size: 395 x 400 mmTemperature range: 0°-300°CConnection value: 3.0 kW / 230 VItem No. 122400Price 395.-

Electric griddle grooved LFT1R---

Housing made of CNS 18/10 Surface made of stainless steel 1 heating zone with removable grease drip tray


Electric griddle smooth LFT2L----

Housing made of CNS 18/10 Surface made of stainless steel 2 separately controllable heating zones with removable grease drip tray


Electric griddle ½ grooved LFT2M----





LOCHER

Tel: +44 (0)118 957 1344

Gri

ddle

Griddle

Electric griddle grooved LFT2R----



Electric griddle smooth LFT3L----



Electric griddle ⅓ grooved LFT3M----





LOCHER

www.cuisinequip.com

Electric contact grill EKG28Rtop and bottom grooved - -----

Housing made of stainless steel 18/10Grill plates made of cast iron, for an even temperature distributionStepless temperature controlMain switch, power and heating indicator lamps in faceplateInsulated handleWith grease drip tray

Ext. dimensions: W. 280 x D. 280 x H. 300 mmGrill plate size: 250 x 250 mmTemperature range: 50°-300°CConnection value: 1.75 kW / 230 VWeight: 16 kgItem No. 112710Price 265.-

Contact grill

Cont

act

grill Electric contact grill EKG41R

top and bottom grooved - -----



Electric contact grill EKG51R with extra large grill surface, top and bottom grooved - ------

Housing made of stainless steel 18/10Grill plates made of cast iron, for an even temperature distributionStepless temperature control Separate control of top and bottom heatMain switch, power and heating indicator lamps in faceplateInsulated handleWith grease drip tray




LOCHER

Tel: +44 (0)118 957 1344

Cont

act

grill

Contact grill

Electric contact grill EKG28ORgrooved top and smooth bottom- -----


Ext. dimensions: W. 280 x D. 280 x H. 300 mmGrill plate size: 250 x 250 mmTemperature range: 50°-300°CConnection value: 1.75 kW / 230 VWeight: 16 kg Item No. 112711Price 265.-

Electric contact grill EKG41ORgrooved top and smooth bottom - -----



Electric contact grill EKG51OR with extra large grill surface, grooved top and smooth bottom - ------

Housing made of stainless steel 18/10Grill plates made of cast iron, for an even temperature distributionStepless temperature controlSeparate control of top and bottom heatMain switch, power and heating indicator lamps in faceplateInsulated handleWith grease drip tray




LOCHER

www.cuisinequip.com

Contact grill

Electric double contact grill EKG82ORgrooved top and smooth bottom - -----

Housing made of stainless steel 18/10Grill plates made of cast iron, for an even temperature distributionStepless temperature controlMain switch, power and heating indicator lamps in faceplateInsulated handlesWith grease drip tray

Ext. dimensions: W. 820 x D. 500 x H. 300 mmGrill plate size: 2 x 360 x 270 mmTemperature range: 50°-300°CConnection value: 2 x 2.5 kW / 2 x 230 VWeight: 58 kgItem No. 112713Price 598.-

Electric double contact grill EKG56OR with extra large grill surfaces, grooved top and smooth bottom- -----


Ext. dimensions: W. 560 x D. 440 x H. 300 mmGrill plate size: bottom: 520 mm, top 2 x 240 mmTemperature range: 50°-300°CConnection value: 3.5 kW / 230 VWeight: 34 kgItem No. 112718Price 465.-

Electric double contact grill EKG56R with extra large grill surfaces, top and bottom grooved - -----


Ext. dimensions: W. 560 x D. 440 x H. 300 mmGrill plate size: bottom: 520 mm, top 2 x 240 mmTemperature range: 50°-300°CConnection value: 3.5 kW / 230 VWeight: 34 kgItem No. 112719Price 465.-

Cont

act

grill



LOCHER

Tel: +44 (0)118 957 1344

Pasta Cookers

Pasta cooker LCC10- ---

Housing made of CNS 18/10 With drain tapStepless temperature adjustment ranging 0-110°CIncl. 3 baskets: 1x 260x170x160 mm; 2x 130x170x160 mm


Pasta cooker LVT07- --

--

Housing made of CNS 18/10With drain tap Removable switching box with Incoloy radiant heater, for easier cleaningStepless temperature adjustment ranging 30 °-110°CIncl. 1 basket: 210x235x100 mm



Past

a Co

oker

s


LOCHER

www.cuisinequip.com

Sala

man

der

Energy saving salamander GN 2/3, SAL40- --- - - -

----

With electronic controlHousing design in CNS 18/10Table top unit or for wall-mounted installationHeating through heating elements installed in housing under ceran glassHeight-adjustable "Hi-Light" heating element for optimaltemperature adjustmentHeat-up time approx. 5 secondsTemperature setting through sensor keypad (4-digit digital display) and knob2-zone heating function (left or full heating zone)2 level keeping warm functionElectronic timer 0 - 15 minIncluded accessories: Supply line with plug, 1 drip tray, 1 grid and wall console

Ext. dimensions: W. 400 x D. 500 x H. 525 mmInner height 220 mmConnection value: 3.0 kW / 230 VItem No. 301740Price 1990.-

Energy saving salamander GN 2/3, SAL40TWith plate detection Item No. 301741Price 2390.-

Energy saving salamander GN 1/1, SAL60- ---

- --

----

With electronic controlHousing design in CNS 18/10Table top unit or for wall-mounted installationHeating through heating elements installed in housing under ceran glassHeight-adjustable "Hi-Light" heating element for optimal temperature adjustmentHeat-up time approx. 5 secondsTemperature setting through sensor keypad (4-digit digital display) and knob2-zone heating function (center or full heating zone)2 level keeping warm functionElectronic timer 0 - 15 minIncluded accessories: Supply line with CEE plug 1 drip tray, 1 grid and wall console


Energy saving salamander GN 1/1, SAL60TWith plate detection Item No. 301761Price 2990.-

SalamanderProfessional Chef Series


LOCHER

Tel: +44 (0)118 957 1344

Sala

man

der

Energy-saving salamander GN 1/1, - --

-- -- -

----

With electronic controlHousing design in CNS 18/10Table top unit with removable back panel (can be used from both sides)3 shelf levels, removable tray supportHeating through heating elements installed in housing under ceran glass"Hi-Light" heating element for optimal temperature adjustmentHeat-up time approx. 5 secondsTemperature setting through sensor keypad (4-digit digital display) and knob1 heating zone with 9-point power setting2 level keeping warm functionElectronic timer 0 - 15 minIncluded accessories: Supply line with plug, 1 drip tray and 1 grid with 2 handles


Energy saving salamander GN 1/1+, SAL75- ---

- --

----

With electronic controlHousing design in CNS 18/10Table top unit or for wall-mounted installationHeating through heating elements installed in housing underceran glassHeight-adjustable "Hi-Light" heating element for optimaltemperature adjustmentHeat-up time approx. 5 secondsTemperature setting through sensor keypad (4-digit digital display) and knob2-zone heating function (center or full heating zone)2 level keeping warm functionElectronic timer 0 - 15 minIncluded accessories: Supply line with CEE plug 1 drip tray, 1 grid and wall console


Energy saving salamander GN 1/1+, SAL75TWith plate detection Item No. 301376Price 3290.-

SalamanderProfessional Chef Series


LOCHER

www.cuisinequip.com

Convection oven LHSE- -------

Design: Stainless steel 18/10Stainless steel baking chamber with glass door (double panel)Stepless temperature controlManual time setting 0 - 120 minControl lamps for temperature and timeInsertion of maximum 4 baking traysDistance between trays 70 mmIncluded accessories: 4 baking trays 454 x 327 mm

Ext. dimensions: W. 595 x D. 605 x H. 570 mmTemperature range: 50°-300°CConnection value: 2.67 kW / 230 VWeight: 44 kgItem No. 632502Price 699.-

Convection oven with grill and steam injection LH60- ----------

Design: Stainless steel 18/10Stainless steel baking chamber with glass door (double pane) Reversing motor for optimal heat distribution in baking chamberStepless temperature controlManual time setting 0 - 120 minManual steam injectionControl lamps for temperature and time4 inserts: 454 x 327 mmDistance between trays 70 mmFixed water connection ¾“Delivery incl. 4 baking trays 454 x 327 mm

Ext. dimensions: W. 595 x D. 605 x H. 570 mmTemperature range: 50°-300°CGrill: 2 kWConnection value: 2.67 kW / 230 VWeight: 48 kgItem No. 632503Price 735.-

Convection oven with steam injection LH80- ----------

Design: Stainless steel 18/10Stainless steel baking chamber with glass door (double pane)Interior lighting2 motors for optimal heat distributionStepless temperature controlManual time setting 0 - 120 minManual steam injectionControl lamps for temperature and time4 inserts: 600 x 400 mm distance 70 mmFixed water connection ¾“Delivery incl. 4 baking trays 600 x 400 mm

Ext. dimensions: W. 834 x D. 796 x H. 572 mmTemperature range: 50°-300°CConnection value: 6.4 kW / 400 VWeight: 67 kgItem No. 632504Price 1185.-

Convection oven

Conv

ecti

on o

ven



LOCHER

Tel: +44 (0)118 957 1344

Convection oven with steam injection LH5B23- --------

-

Design completely in CNS 18/10Rounded baking chamber and glass door (with security double panel)5 inserts GN 2/3 or 440x350 mm Distance between trays 75 mmDigital control, up to 20 programmes to be set by user3 cooking phasesDigital timer and programmable pre-heating timeWith ambient humidity control and manual steam injectionFan motor with automatic rotation direction reversing function (reversing run for optimized cooking chamber conditions)Fixed water connection 3/4‘‘

Ext. dimensions: W. 620 x D. 680 x H. 660 mmTemperature range: 60°-270°CConnection value: 3.35 kW / 230 VItem No. 622512Price 1350.-

Convection oven with steam injection LH3B11- ----------

Design completely in CNS 18/10Rounded baking chamber and glass door (with security double panel)3 inserts GN 1/1 or 600x400 mm Distance between trays 75 mmDigital control, up to 20 programmes to be set by user3 cooking phasesDigital timer and programmable pre-heating timeWith ambient humidity control and manual steam injectionFan motor with automatic rotation direction reversing function (reversing run for optimized cooking chamber conditions)Fixed water connection 3/4‘‘


Convection oven with steam injection LH4B70- -------

-

Design completely in CNS 18/10Rounded baking chamber and glass door (with security double panel)4 inserts GN 1/1 or 600x400 mm Distance between trays 65 mmStepless temperature control Manual time adjustment 0-120 minutesManual steam injectionFan motor with automatic rotation direction reversing function (reversing run for optimized cooking chamber conditions)Fixed water connection 3/4‘‘


Convection oven

Conv

ecti

on o

ven



LOCHER

www.cuisinequip.com

Baking Trays

Baki

ng T

rays

Punched baking tray, 433x333, Alu silicone coated- 3 mm perforation, aluminium with 3 bent-up sides

Dimensions: W. 433 x D. 333 x H. 17 mmWeight: 0.5 kgItem No. 659506Price 30.-

Punched baking tray, 2/3 GN, Alu- 3 mm perforation, aluminium with 3 bent-up sides


Punched baking tray, 2/3 GN, Alu silicone coated- 3 mm perforation, aluminium with 4 bent-up sides


Baking tray 433x333, CNS- Stainless steel with 4 bent-up sides


Punched baking tray, 433x333, Alu- 3 mm perforation, aluminium with 3 bent-up sides




LOCHER

Tel: +44 (0)118 957 1344

Baki

ng T

rays

Baking Trays

Punched baking tray, 600x400, Alu silicone coated- 3 mm perforation, aluminium with 3 bent-up sides


Punched baking tray, 600x400, Alu- 3 mm perforation, aluminium with 3 bent-up sides


Baking tray 600x400, Alu- Aluminium with 3 bent-up sides


Punched baking tray, 1/1 GN, Alu silicone coated- 3 mm perforation, aluminium with 3 bent-up sides


Punched baking tray, 1/1 GN, Alu- Aluminium with 3 bent-up sides




LOCHER

www.cuisinequip.com

Pizza oven ELP40- ----------

Front side stainless steelBaking chamber with firebrick baseEnergy saving high-quality rock wool insulationArmoured heating resistorsVentilation stackDoor with inspection windowInterior lightingMaintenance-free hingeless door flapsCapacity: 1 Pizza Ø 39 cmIndependent top and bottom heatControl lamp for temperature

Ext. dimensions: W. 630 x D. 515 x H. 290 mmBaking chamber dimensions: 400 x 400 x 100 mmTemperature range: 85°-450°CConnection value: 3.5 kW / 230 VWeight: 38 kgItem No. 612775Price 649.-

Pizza oven ELP40/2- ----------

Front side stainless steelBaking chamber with firebrick baseEnergy saving high-quality rock wool insulationArmoured heating resistorsVentilation stackDoor with inspection windowInterior lightingMaintenance-free hingeless door flapsCapacity: 2 pizzas Ø 39 cmIndependent top and bottom heatControl lamp for temperature

Ext. dimensions: W. 630 x D. 515 x H. 500 mmBaking chamber dimensions: 2 x 400 x 400 x 100 mmTemperature range: 85°-450°CConnection value: 7.0 kW / 400 VWeight: 68 kgItem No. 612774Price 1065.-

Pizza oven

Pizz

a ov

ens

Base frame UGP40- -

Sheet steel, black varnishedFlat pack for DIY installation

Suitable for ELP 40 & ELP 40/2 Item No. 612790Price 245.-



LOCHER

Tel: +44 (0)118 957 1344

Pizz

a ov

ens



Ext. dimensions: W. 800 x D. 640 x H. 360 mmBaking chamber dimensions: 500 x 500 x 100 mmTemperature range: 85°-450°CConnection value: 4.0 kW / 400 VWeight: 56 kgItem No. 612770Price 698.-


Front side stainless steelBaking chamber with firebrick baseEnergy saving high-quality rock wool insulationArmoured heating resistorsVentilation stackDoor with inspection windowInterior lightingMaintenance-free hingeless door flapsCapacity: 2 x 4 pizzas Ø 25 cmIndependent top and bottom heatControl lamp for temperature


Pizza oven

Base frame UGP50- -

Sheet steel, black varnishedFlat pack for DIY installation

Suitable for ELP 50 & ELP 50/2Item No. 612791Price 275.-



LOCHER

www.cuisinequip.com



Ext. dimensions: W. 890 x D. 820 x H. 430 mmBaking chamber dimensions: 620 x 620 x 150 mmTemperature range: 85°-450°CConnection value: 5.0 kW / 400 VWeight: 75 kg Item No. 612772Price 979.-


Front side stainless steelBaking chamber with firebrick baseEnergy saving high-quality rock wool insulationArmoured heating resistorsVentilation stackDoor with inspection windowInterior lightingMaintenance-free hingeless door flapsCapacity: 2 x 4 pizzas Ø 30 cmIndependent top and bottom heatControl lamp for temperature


Pizza oven

Pizz

a ov

ens

Base frame UGP60- --

Sheet steel, black varnishedFlat pack for DIY installationSuitable for ELP 60 and ELP 60/2

Weight: 15 kg Item No. 612792Price 298.-



LOCHER

Tel: +44 (0)118 957 1344

Pizz

a ov

ens

Base frame UEP66- --

for EP66 and EP66/2 Design completely in stainless steelHeight-adjustable feet

Ext. dimensions: W. 920 x D. 740 x H. 1050 mmWeight: 27 kg Item No. 622751Price 360.-

Pizza oven

Pizza oven EP66/2- ---------

Front and side panel completely stainless steelBaking chamber with firebrick baseEnergy saving high-quality rock wool insulationArmoured heating resistorsDoor with inspection windowInterior lightingMaintenance-free hingeless door flapsCapacity: 2 x 4 pizzas Ø 31 cmIndependent top and bottom heatTemperature display with analogue thermometer

Ext. dimensions: W. 920x D. 880 x H. 650 mmBaking chamber dimensions: 2 x 660 x 660 x 140 mmTemperature range: 85°-400°CConnection value: 11.2 kW / 400 VWeight: 110 kg Item No. 622762Price 1790.-

Pizza oven EP66- ---------

Front and side panel completely stainless steelBaking chamber with firebrick baseEnergy saving high-quality rock wool insulationArmoured heating resistorsDoor with inspection windowInterior lightingMaintenance-free hingeless door flapsCapacity: 4 pizzas Ø 31 cmIndependent top and bottom heatTemperature display with analogue thermometer

Ext. dimensions: W. 920x D. 880 x H. 350 mmBaking chamber dimensions: 660 x 660 x 140 mmTemperature range: 85°-400°CConnection value: 5.6 kW / 400 VWeight: 60 kgItem No. 622761Price 998.-



LOCHER

www.cuisinequip.com

Pizza oven

Pizz

a ov

ens

Base frame UEP105- --

for EP105 and EP105/2 Design completely in stainless steelHeight-adjustable feet

Ext. dimensions: W. 920 x D. 1070 x H. 1050 mmWeight: 29 kg Item No. 622752Price 390.-

Pizza oven EP105/2- ---------

Front and side panel completely stainless steelBaking chamber with firebrick baseEnergy saving high-quality rock wool insulationArmoured heating resistorsDoor with inspection windowInterior lightingMaintenance-free hingeless door flapsCapacity: 2 x 6 pizzas Ø 31 cmIndependent top and bottom heatTemperature display with analogue thermometer


Pizza oven EP105- ---------

Front and side panel completely stainless steelBaking chamber with firebrick baseEnergy saving high-quality rock wool insulationArmoured heating resistorsDoor with inspection windowInterior lightingMaintenance-free hingeless door flapsCapacity: 6 pizzas Ø 31 cmIndependent top and bottom heatTemperature display with analogue thermometer

Ext. dimensions: W. 920 x D. 1210 x H. 350 mmBaking chamber dimensions: 660 x 990 x 140 mmTemperature range: 85°-400°CConnection value: 7.2 kW / 400 VWeight: 83 kg Item No. 622763Price 1290.-



LOCHER

Tel: +44 (0)118 957 1344

Dou

gh S

heet

ing

Mac

hine

Dough sheeting machine TA42- -----

Sheeting machine with 2 roller pairs Suitable for bread and pizza doughsHousing made of stainless steelOn / Off buttonFor pizzas from 26-40 cmDough weight 210-600 g

Ext. dimensions: W. 530 x D. 470 x H. 790 mmConnection value: 0.37 kW / 230 VWeight: 35 kgItem No. 622791Price 1407.-

Dough sheeting machine TA32- -----

Sheeting machine with 2 roller pairs Suitable for bread and pizza doughsHousing made of stainless steelOn / Off buttonFor pizzas from 14 - 31 cmDough weight 80 - 210 g

Ext. dimensions: W. 420 x D. 470 x H. 650 mmConnection value: 0.25 kW / 230 VWeight: 26 kgItem No. 622790Price 1197.-

Dough sheeting machineProfessional Chef Series


LOCHER

www.cuisinequip.com

Terms and conditions of sale, delivery and payment. (T&C)

The buyer’s attention is in particular drawn to the provisions of clause 10.4.

1. Interpretation1.1 The definitions and rules of interpretation in this clause apply in these conditions. Buyer: the person, firm or company who purchases the Goods from the Company. Company: Cuisine Equipment Limited a company registered in England and Wales with company number 07918778 whose registered office is situated at 4 Trafford Road, Reading, Berkshire, RG1 8JS. Contract: any contract between the Company and the Buyer for the sale and purchase of the Goods, incorporating these conditions. Delivery Point: the place where delivery of the Goods is to take place under clause 4. Goods: any goods agreed in the Contract to be supplied to the Buyer by the Company (including any part or parts of them).1.5A reference to a particular law is a reference to it as it is in force for the time being taking account of any amendment, extension, application or re-enactment and includes any subordinate legislation for the time being in force made under it.1.6 Words in the singular include the plural and in the plural include the singular.1.7A reference to one gender includes a reference to the other gender.1.8 Clause headings do not affect the interpretation of these clauses.

2. Application of terms2.1 Subject to any variation under clause 2.3 the Contract shall be on these conditions to the exclusion of all other terms and conditions (including any terms or conditions which the Buyer purports to apply under any purchase order, confirmation of order, specification or other document).2.2 No terms or conditions endorsed on, delivered with or contained in the Buyer’s purchase order, confirmation of order, specification or other document shall form part of the Contract simply as a result of such document being referred to in the Contract.2.3 These conditions apply to all the Company’s sales and any variation to these conditions and any representations about the Goods shall have no effect unless expressly agreed in writing and signed by the Managing Director of the Company. The Buyer acknowledges that it has not relied on any statement, promise or representation made or given by or on behalf of the Company which is not set out in the Contract. Nothing in this clause shall exclude or limit the Company’s liability for fraudulent misrepresentation.2.4 Each order or acceptance of a quotation for Goods by the Buyer from the Company shall be deemed to be an offer by the Buyer to buy Goods subject to these conditions.2.5 No order placed by the Buyer shall be deemed to be accepted by the Company until an acknowledgement of order is issued by the Company or (if earlier) the Company delivers the Goods to the Buyer.2.6 The Buyer shall ensure that the terms of its order and any applicable specification are complete and accurate and a purchase order number should be supplied by the Buyer to the Company.2.7 Any quotation is valid for a period of 30 days only from its date, provided that the Company has not previously withdrawn it or previously delivered the Goods, the subject of the quotation.

3. Description3.1 The quantity and description of the Goods shall be as set out in the Company’s quotation.3.2 All samples, drawings, descriptive matter, specifications and advertising issued by the Company and any descriptions or illustrations contained in the Company’s catalogues or brochures are issued or published for the sole purpose of giving an approximate idea of the Goods described in them. They shall not form part of the Contract and this is not a sale by sample.

4. Delivery4.1 Unless otherwise agreed in writing or acknowledgement of order by the Company, delivery of the Goods shall take place at the Company’s place of business or an address advised by the Buyer4.2 Any dates specified by the Company for delivery of the Goods are intended to be an estimate and time for delivery shall not be made of the essence by notice. If no dates are so specified, delivery shall be within a reasonable time.4.3 Subject to the other provisions of these conditions the Company shall not be liable for any direct, indirect or consequential loss (all three of which terms include, without limitation, pure economic loss, loss of profits, loss of business, depletion of goodwill and similar loss), costs, damages, charges or expenses caused directly or indirectly by any delay in the delivery of the Goods (even if caused by the Company’s negligence), nor shall any delay entitle the Buyer to terminate or rescind the Contract unless such delay exceeds 180 days.4.4 If for any reason the Buyer fails to accept delivery of any of the Goods when they are ready for delivery, or the Company is unable to deliver the Goods on time because the Buyer has not provided appropriate instructions, documents, licences or authorisations: (a) risk in the Goods shall pass to the Buyer (including for loss or damage caused by the Company’s negligence); (b) the Company may store the Goods until delivery, whereupon the Buyer shall be liable for all related costs and expenses (including, without limitation, storage and insurance); and (c) a fee will be levied for any subsequent delivery.4.5 The Buyer shall provide at the Delivery Point and at its expense adequate and appropriate equipment and manual labour for loading and, if appropriate, unloading the Goods. The Goods are at the risk of the Buyer during unloading.4.6 If the Company delivers to the Buyer a quantity of Goods of up to 10% more or less than the quantity accepted by the Company, the Buyer shall not be entitled to object to or reject the Goods or any of them by reason of the surplus or shortfall and shall pay for such goods at the pro rata Contract rate.4.7 The Company may deliver the Goods by separate instalments. Each separate instalment shall be invoiced and paid for in accordance with the provisions of the Contract.4.8 Each instalment shall be a separate Contract and no cancellation or termination of any one Contract relating to an instalment shall entitle the Buyer to repudiate or cancel any other Contract or instalment.

5. Non-delivery5.1 The quantity of any consignment of Goods as recorded by the Company upon despatch from the Company’s place of business shall be conclusive evidence of the quantity received by the Buyer on delivery unless the Buyer can provide conclusive evidence proving the contrary.5.2 The Company shall not be liable for any non-delivery of Goods (even if caused by the Company’s negligence) unless the Buyer gives written notice to the Company of the non- delivery within seven days of the date when the Goods would in the ordinary course of events have been received.5.3 Any liability of the Company for non-delivery of the Goods shall be limited to replacing the Goods within a reasonable time or issuing a credit note at the pro rata Contract rate against any invoice raised for such Goods.

6. Risk/title6.1 Subject to clause 4.5 the Goods are at the risk of the Buyer from the time of delivery.6.2 Ownership of the Goods shall not pass to the Buyer until the Company has received in full (in cash or cleared funds) all sums due to it in respect of: (d) the Goods; and (e) all other sums which are or which become due to the Company from the Buyer on any account.6.3 Until ownership of the Goods has passed to the Buyer, the Buyer shall:6.4 hold the Goods on a fiduciary basis as the Company’s bailee; (a) store the Goods (at no cost to the Company) separately from all other goods of the Buyer or any third party in such a way that they remain readily identifiable as the Company’s property;

T&C

T&C


LOCHER

Tel: +44 (0)118 957 1344

T&C

(b) not destroy, deface or obscure any identifying mark or packaging on or relating to the Goods; and (c) maintain the Goods in satisfactory condition and keep them insured on the Company’s behalf for their full price against all risks to the reasonable satisfaction of the Company. On request the Buyer shall produce the policy of insurance to the Company.6.5 The Buyer may resell the Goods before ownership has passed to it solely on the following conditions: (a) any sale shall be effected in the ordinary course of the Buyer’s business at full market value; and (b) any such sale shall be a sale of the Company’s property on the Buyer’s own behalf and the Buyer shall deal as principal when making such a sale.6.6 The Buyer’s right to possession of the Goods shall terminate immediately if: (a) the Buyer has a bankruptcy order made against him or makes an arrangement or composition with his creditors, or otherwise takes the benefit of any statutory provision for the time being in force for the relief of insolvent debtors, or (being a body corporate) convenes a meeting of creditors (whether formal or informal), or enters into liquidation (whether voluntary or compulsory) except a solvent voluntary liquidation for the purpose only of reconstruction or amalgamation, or has a receiver and/or manager, administrator or administrative receiver appointed of its undertaking or any part thereof, or documents are filed with the court for the appointment of an administrator of the Buyer or notice of intention to appoint an administrator is given by the Buyer or its directors or by a qualifying floating charge holder (as defined in paragraph 14 of Schedule B1 to the Insolvency Act 1986), or a resolution is passed or a petition presented to any court for the winding-up of the Buyer or for the granting of an administration order in respect of the Buyer, or any proceedings are commenced relating to the insolvency or possible insolvency of the Buyer; or (b) the Buyer suffers or allows any execution, whether legal or equitable, to be levied on his/its property or obtained against him/it, or fails to observe or perform any of his/its obligations under the Contract or any other contract between the Company and the Buyer, or is unable to pay its debts within the meaning of section 123 of the Insolvency Act 1986 or the Buyer ceases to trade; or (c) the Buyer encumbers or in any way charges any of the Goods.6.7 The Company shall be entitled to recover payment for the Goods notwithstanding that ownership of any of the Goods has not passed from the Company.6.8 The Buyer grants the Company, its agents and employees an irrevocable licence at any time to enter any premises where the Goods are or may be stored in order to inspect them, or, where the Buyer’s right to possession has terminated, to recover them.6.9 Where the Company is unable to determine whether any Goods are the goods in respect of which the Buyer’s right to possession has terminated, the Buyer shall be deemed to have sold all goods of the kind sold by the Company to the Buyer in the order in which they were invoiced to the Buyer.6.10 On termination of the Contract, howsoever caused, the Company’s (but not the Buyer’s) rights contained in this clause 6 shall remain in effect.

7. Price7.1 Unless otherwise agreed by the Company in writing, the price for the Goods shall be the price set out in the Company’s price list published on the date of delivery or deemed delivery/quotation provided to the Buyer.7.2 The price for the Goods shall be exclusive of any value added tax and all costs or charges in relation to packaging, loading, unloading, carriage and insurance, all of which amounts the Buyer shall pay in addition when it is due to pay for the Goods unless otherwise agreed in writing by the Managing Director of the Company.

8. Payment8.1 Clause 8.2 shall apply where the Customer has a credit account with the Company. Clause 8.3 shall apply where the Customer has a pro-forma account with the Company. The remainder of clause 8 shall apply in either case.8.2 Subject to clause 8.5, payment of the price for the Goods is due in pounds sterling within 30 days following the date of the Company’s invoice.8.3 Delivery of the Goods shall not take place until the Company has received payment in full.8.4 No payment shall be deemed to have been received until the Company has received cleared funds.8.5 Time for payment shall be of the essence.8.6 All payments payable to the Company under the Contract shall become due immediately on its termination despite any other provision.8.7 The Buyer shall make all payments due under the Contract in full without any deduction whether by way of set-off, counterclaim, discount, abatement or otherwise unless the Buyer has a valid court order requiring an amount equal to such deduction to be paid by the Company to the Buyer.8.8 If the Buyer fails to pay the Company any sum due pursuant to the Contract, the Buyer shall be liable to pay interest to the Company on such sum from the due date for payment at the annual rate of 4% above the base lending rate from time to time of Royal Bank of Scotland plc, accruing on a daily basis until payment is made, whether before or after any judgment. The Company reserves the right to claim interest under the Late Payment of Commercial Debts (Interest) Act 1998.

9. Quality9.1 Where the Company is not the manufacturer of the Goods, the Company shall endeavour to transfer to the Buyer the benefit of any warranty or guarantee given to the Company.9.2 The Company warrants that (subject to the other provisions of these conditions) upon delivery the Goods shall be of satisfactory quality within the meaning of the Sale of Goods Act 1979;9.3 The Company shall not be liable for a breach of the warranty in clause 9.2 unless: (a) the Buyer gives written notice of the defect to the Company, and, if the defect is as a result of damage in transit, to the carrier, within 7 days of the time when the Buyer discovers or ought reasonably to have discovered the defect; and (b) the Company is given a reasonable opportunity after receiving the notice of examining such Goods and the Buyer (if asked to do so by the Company) returns such Goods to the Company’s place of business at the Company’s cost for the examination to take place there.9.4 The Company shall not be liable for a breach of the warranty in clause 9.2 if: (a) the Buyer makes any further use of such Goods after giving such notice; or (b) the defect arises because the Buyer failed to follow the Company’s oral or written instructions as to the storage, installation, commissioning, use or maintenance of the Goods or (if there are none) good trade practice; or (c) the Buyer alters or repairs such Goods without the written consent of the Company.9.5 Subject to clause 9.3 and clause 9.4, if any of the Goods do not conform with the warranty in clause 9.2 the Company shall at its option repair or replace such Goods (or the defective part) or refund the price of such Goods at the pro rata Contract rate provided that, if the Company so requests, the Buyer shall, at the Company’s expense, return the Goods or the part of such Goods which is or are defective to the Company.9.6 If the Company complies with clause 9.5 it shall have no further liability for a breach of the warranty in clause 9.2 in respect of such Goods.

10. Limitation of liability10.1 Subject to clause 4, clause 5 and clause 9, the following provisions set out the entire financial liability of the Company (including any liability for the acts or omissions of its employees, agents and sub-contractors) to the Buyer in respect of: (a) any breach of these conditions; (b) any use made or resale by the Buyer of any of the Goods, or of any product incorporating any of the Goods; (c) any representation, statement or tortious act or omission including negligence arising under or in connection with the Contract; and (d) any damage caused to the Goods.10.2 All warranties, conditions and other terms implied by statute or common law (save for the conditions implied by section 12 of the Sale of Goods Act 1979) are, to the fullest extent permitted by law, excluded from the Contract.10.3 Nothing in these conditions excludes or limits the liability of the Company: (a) for death or personal injury caused by the Company’s negligence; or (b) under section 2(3), Consumer Protection Act 1987; or (c) for any matter which it would be illegal for the Company to exclude or attempt to exclude its liability; or (d) for fraud or fraudulent misrepresentation.10.4 Subject to clause 10.2 and clause 10.3: (a) the Company’s total liability in contract, tort (including negligence or breach of statutory duty), misrepresentation, restitution or otherwise, arising in connection with the

T&C


LOCHER

www.cuisinequip.com

performance or contemplated performance of the Contract shall be limited to the Contract price; and (b) the Company shall not be liable to the Buyer for any pure economic loss, loss of profit, loss of business, depletion of goodwill or otherwise, in each case whether direct, indirect or consequential, or any claims for consequential compensation whatsoever (howsoever caused) which arise out of or in connection with the Contract.

11. Assignment11.1 The Company may assign the Contract or any part of it to any person, firm or company.11.2 The Buyer shall not be entitled to assign the Contract or any part of it without the prior written consent of the Company.

12. Force majeure12.1 The Company reserves the right to defer the date of delivery or to cancel the Contract or reduce the volume of the Goods ordered by the Buyer (without liability to the Buyer) if it is prevented from or delayed in the carrying on of its business due to circumstances beyond the reasonable control of the Company including, without limitation, acts of God, governmental actions, war or national emergency, acts of terrorism, protests, riot, civil commotion, fire, explosion, flood, epidemic, lock-outs, strikes or other labour disputes (whether or not relating to either party’s workforce), or restraints or delays affecting carriers or inability or delay in obtaining supplies of adequate or suitable materials, provided that, if the event in question continues for a continuous period in excess of 60 days, the Buyer shall be entitled to give notice in writing to the Company to terminate the Contract.

13. General13.1 Each right or remedy of the Company under the Contract is without prejudice to any other right or remedy of the Company whether under the Contract or not.13.2 If any provision of the Contract is found by any court, tribunal or administrative body of competent jurisdiction to be wholly or partly illegal, invalid, void, voidable, unenforceable or unreasonable it shall to the extent of such illegality, invalidity, voidness, voidability, unenforceability or unreasonableness be deemed severable and the remaining provisions of the Contract and the remainder of such provision shall continue in full force and effect.13.3 Failure or delay by the Company in enforcing or partially enforcing any provision of the Contract shall not be construed as a waiver of any of its rights under the Contract.13.4 Any waiver by the Company of any breach of, or any default under, any provision of the Contract by the Buyer shall not be deemed a waiver of any subsequent breach or default and shall in no way affect the other terms of the Contract.13.5 The parties to the Contract do not intend that any term of the Contract shall be enforceable by virtue of the Contracts (Rights of Third Parties) Act 1999 by any person that is not a party to it.13.6 The formation, existence, construction, performance, validity and all aspects of the Contract shall be governed by English law and the parties submit to the exclusive jurisdiction of the English courts.

14. Communications14.1 All communications between the parties about the Contract shall be in writing and delivered by hand or sent by pre-paid first class post or sent by fax or by email: (a) (in case of communications to the Company) to its registered office or such changed address as shall be notified to the Buyer by the Company; or (b) (in the case of the communications to the Buyer) to the registered office of the addressee (if it is a company) or (in any other case) to any address of the Buyer set out in any document which forms part of the Contract or such other address as shall be notified to the Company by the Buyer.14.2 Communications shall be deemed to have been received: (a) if sent by pre-paid first class post, two days (excluding Saturdays, Sundays and bank and public holidays) after posting (exclusive of the day of posting); or (b) if delivered by hand, on the day of delivery; or (c) if sent by fax on a working day prior to 4.00 pm, at the time of transmission and otherwise on the next working day; or (d) if sent by email at the time at which a read receipt is delivered to the sender.14.3 Communications addressed to the Company shall be marked for the attention of the Managing Director. Cuisine will endeavour where possible to respond to requests by customers for confirmation that an e mail order has been received. The onus lies with the ordering company to satisfy themselves that the purchase order sent has been received by Cuisine, be it by fax or e mail.

T&C


LOCHER

Tel: +44 (0)118 957 1344

Cuisine Equipment Ltd4 Trafford Road

ReadingRG1 8JS

United Kingdom

Tel: +44 (0)118 957 1344 Email: [email protected]: www.cuisinequip.com

Documents

LOCHER - Cuisinequip Price... · 121-123 Accessories 850: 124-127 Doors: 128: Table of Contents: Professional Chef Series: Page: Table Top Induction Cooker 129-131 & 133: Table Top