Embed Size (px)
Citation preview
Artificial Lift
LLS Linear Lift System
Solving challenges.™
1
Artificial Lift
Easily transported and quickly installed on any existing
rod-pumped well, the Halliburton LLS Linear Lift System pays
benefits with every stroke. The LLS real-time adjustable,
ultra-long, variable-speed stroke self-adjusts to dynamic fluid
levels in the well to optimize well performance. The integrated
pump-off controller software automatically senses downhole
conditions and changing load levels, and then adjusts unit
speed to maintain optimum fluid levels.
Lower operating costsOperating costs are reduced from day
one starting with installation. Perfect
for wellsites in built-up or
environmentally sensitive areas, the
LLS small footprint requires no large
cement pad, and most LLS units can be
transported to your site on a standard
flatbed truck. For remote sites, the LLS
system is air-transportable.
LLS long-stroke benefits include reduced rod fatigue as well as
rod and tubing wear, which pays off in fewer interventions and
associated downtime. If downhole maintenance is required, the
LLS unit can be set back quickly and easily to maximize safety
and workflow efficiency.
Applications
• Heavy oil production
• Multiphase producing wells
• Gas-well dewatering
Benefits
• Reduced interventions
• Less rod and tubing wear
• Adapts to all wellheads and downhole systems
• Self-adjusts to dynamic fluid levels for optimized well performance
• Greater load range than conventional pumpjacks
• Easy and economical to transport, install and maintain
Greater production
LLS surface-mounted unit
An economicalsolution for allpumping wells,including low APIoil production orheavy lift situations
2
Features that deliver efficiency and reliability
Elegant design – The single-acting hydraulic ram hasno piston seals, and the rod seal is a field-replaceable
split-vee packing. A drain port to the reservoir
prevents external oil leakage and alerts field crews
when the packing requires service. The only hydraulic
connection to the ram is a single high-pressure flexible
hose. The ram is easily lowered and the unit set back
for workover operations.
Precise control – Each unit is equipped with amicroprocessor controller to monitor polished rod
load and position, and to adjust the speed for
optimized well performance. The easy-to-use
controller interface allows field crews to set or
change parameters while the unit is running.
Versatile and efficient – Each unit is equipped witha microprocessor controller to monitor polished rod
load and position, and to adjust the speed for
optimized well performance. The easy-to-use
controller interface allows field crews to set or change
parameters while the unit is running.
Features
• Ultra-long stroke adjustable without shutdown
• Independent variable stroke speed
• Software-integrated pump-off controller
• Built-in automatic fluid level control
• Dynamometer readout
• Uses same rod, pump and polished rod as
conventional pumpjack systems
• High load capacity
• Low weight, small footprint, quiet
• Can be equipped with advanced Halliburton
Remote Monitoring & Control (RMC) to provide
vital pump and unit information remotely
LLS wellhead mounted unit
Let us help youselect the rightArtificial LiftLinear Lift Systemfor your well — today
LLS Linear Lift System Specifications
Model1 Load (lb)2 Max. Stroke (ft)
Surface Mounted
LLS SM 16-18 16,000 18
LLS SM 24-18 24,000 18
LLS SM 30-20 30,000 20
WellheadMounted
LLSWM 11-10 11,000 10
LLSWM 18-14 18,000 14
LLSWM 22-14 22,000 14
1 Other models available by special order.2 Nominal rating.
H0896102/12 © 2012 Halliburton. All Rights Reserved.
Sales of Halliburton products and services will be in accord solely withthe terms and conditions contained in the contract between Halliburtonand the customer that is applicable to the sale.
www.halliburton.com
HALLIBURTON
A wide selectionof surface-mountedand wellhead-mountedunits to fit your needs
For more information on the LLS Linear Lift System,please call you local Halliburton representative or email us
