Upload
nguyentruc
View
222
Download
1
Embed Size (px)
Citation preview
In conjunction with:
www.biditup.com | 818.508.7034
www.cia-auction.com | 513.241.9701
Industries (1991) Inc.
AUCTIONEERS | LIQUIDATORSAA | APPRAISERS
Maynards www.maynards.comph 248-569-9781 • fax 248-569-9793
APPRAISERS
AUCTIONEERS LIQUIDATORS
RECOVERYINVESTM
ENT SERVICES
18% ONLINE BUYER’S PREMIUM
INVESTMENT RECOVERY SERVICES3421 North Sylvania Avenue, Fort Worth, TX 76111tel: 800.583.1111 • 817.222.9848 fax: 817.834.4075Email Britton: [email protected] or Greg at [email protected] WWW.IRSAUCTION.COM TX Lic. No. 11245
PUBLIC AUCTION
ONLINE BIDDING: YOU MUST REGISTER IN ADVANCE FOR ONLINE BIDDING
AT THIS AUCTION
INSPECTION: Wednesday, September 30 from 8:00 A.M. – 3:30 P.M.
APEX TOOL GROUPSurplus Assets of
3000 W. Kingsley Road Garland, Texas 75401
LIVE ON-SITE WITH WEBCASTThursday, October 1 at 10:00 A.M.
LARGE QUANTITY OF COLD HEADING EQUIPMENT • CNC VMCs • CNC LATHES • GRINDERS • CONVENTIONAL MACHINING EQUIPMENT • MISC. SUPPORT EQUIPMENT
Apex Tool Group (ATG)is one of the largest manufacturers of professional hand and power tools in the world, serving the industrial, vehicle service and assembly, aerospace, electronics, construction and serious DIY markets.2005 JERN YAO MDL. 19B4S 4-DIE
NATIONAL 3/8" 4-DIE
NATIONAL MDL. FX56CF 6-DIE NATIONAL 1/2" 4-DIE
NATIONAL MDL. 89 2-DIE 3-BLOW
NATIONAL MDL. 1000-7 6-DIE
LEADWELLMDL. V30ICNC VMC
3AVAILABLE
2 2
NATIONAL MDL. 1000-7 6-DIE
2005 JERN YAO MDL. 19B4S 4-DIE
NATIONAL 1/2" 4-DIE MINSTER MDL. S1-300-36-42 SSSC
COLD FORMERS & HEADERSNATIONAL Mdl. 1000-7 6-Die Cold Former, S/N 38519, 1-1/8" cutoff dia. alloy, 5" cutoff length, 6" die kickout, 40–60 PPM. Equipped with: bushing cutoff, 100 HP, 230/460 volt 3-phase motor, power pre-feeding, pneumatic feed roll clamping, transfer lift, nut transfer. *Equipped with drive for IFO CAM for universal transfer.
2005 JERN YAO Mdl. 19B4S 4-Die Progressive Header, S/N 32, 15mm cutoff dia., 140mm cutoff length, 120mm-die kickout, 170 PPM. Equipped with: bushing cutoff, PKO 1–4, bolt maker transfer with IFO CAM, 2-plane straightener, oil centrifuge, spare transfer, Ace monitor.
NATIONAL Mdl. FX56CF 6-Die Cold Former, S/N 20972, 17.7mm cutoff dia., 70mm cutoff length, 75mm kick out length, 38mm PKO stroke, 60/160 PPM, 1400 KN loading force. Equipped with: bushing cutoff, die and punch pack, cold form transfer, smog hog, uncoiler: 20mm wire dia., 4,000-lbs. coil weight, linear feed, punch knock out.
NATIONAL 1/2" 4-Die Progressive Cold Header, S/N 28027, 1/2" cutoff dia. alloy, 5" die kickout, 6-1/2" cutoff length, 70 PPM. Equipped with: bushing cutoff, 2-plane straightener, 30 HP, 230/460 volt, 3-phase, cabinet of tools.
NATIONAL 3/8" 4-Die Progressive Header, S/N 27670, 3/8" max. cutoff dia., 3-1/2" max. die kickout, 4-3/4" cutoff length, 85 PPM. Equipped with: bushing cutoff, AC motor and controls.
NATIONAL Mdl. 89 2-Die 3-Blow Cold Header, S/N 40368, 9/16" cutoff dia. alloy, 5" max. die kickout, 6-1/2" cutoff length, 100 PPM. Equipped with: bushing cutoff, PKO, 25 HP, 460 volt.
33
NATIONAL MDL. FX56CF 6-DIE
NATIONAL MDL. 89 2-DIE 3-BLOW
NATIONAL 3/8" 4-DIE
2006 FANUC MDL. A05B-1138-B242 ROBOT
INLINE WIRE DRAWERS & COILERRMG Mdl. 67-20121-67 Inline Wire Drawer, S/N 91082738, 3/8" nominal wire dia., 28" capstan, 20 HP AC motor, 121 FPM.
RMG Mdl. 67-0761-85 Inline Wire Drawer, S/N 87101814, 3/8" nominal wire dia., 28" capstan, 7 HP AC motor, 61 FPM, 3-phase motor.
RMG Mdl. 910-2554-22 Inline Wire Drawer, S/N 109724, 9/16" nominal wire dia., 36" capstan, 25 HP AC motor, 54 FPM.
RMG Mdl. 2024-02 Uncoiler, S/N 8807229, 1-1/4" max. rod size alloy, 4,000-lbs. coil weight, adjustable speed.
STRAIGHT SIDE SINGLE CRANK PRESSMINSTER Mdl. S1-300-36-42 SSSC, 36" x 42" bolster, 60 SPM, 300-ton, 10" stroke, 10" slide adjustment, 24" shut height, s/n 24157.
ROBOT2006 FANUC Mdl. A05B-1138-B242 Robot, S/N F78237.
ETCHERS(2) TRUMPF F Laser Mdl. Vector Mark Etcher.
(2) ATS Laser Etcher.
LIVE ON-SITE WITH WEBCAST
TRUMPF F LASER ETCHER
2AVAILABLE
4 OKUMA HOWA MDL. ACT 15 CNC LATHES
LEADWELL MDL. V40 CNC
LEADWELL MDL. V30 CNC
LEADWELL MDL. V30I CNC
WERA PROFILATORS
3AVAILABLE
5AVAILABLE
5AVAILABLE
EMCO MDL. 342 CNC LATHES
9AVAILABLE
3AVAILABLE
2AVAILABLE
5
OKUMA HOWA MDL. ACT 3XT CNC LATHE W/BARFEED
SUPERMAX Mdl. YCM-FV56A CNC VMC, S/N 8168.
FANUC Mdl. Robodrill a-T10B CNC VMC.
CNC LATHESFAST CUT Mdl. TNC10 CNC Lathe, S/N D27016.
DAEWOO Mdl. Lynx 200 CNC Lathe, S/N L2001418.
(9) EMCO Mdl. 342 CNC Lathes.
MORI SEIKI Mdl. SL25 CNC Lathe, with barfeed.
OKUMA Howa Mdl. Act 30 CNC Lathe, S/N 9809.
(2) OKUMA HOWA Mdl. Act 15 CNC Lathes, S/Ns 00020, 4048.
(2) OKUMA HOWA Mdl. Act 20 CNC Lathes, S/Ns 4003, 4095.
(2) OKUMA HOWA Mdl. HL-JR CNC Lathes, S/Ns 0020, 8021.
OKUMA HOWA Mdl Act 3 CNC Lathe, S/N 9647.
PROFILATORS(5) WERA Profilators, machine used for polygon milling, both part and tool are indexable, 3" to 12" length cap., profiles are milled on ends of the parts included ball ends, torx and others, milled for either round or hex bar.
CNC VERTICAL MACHINING CENTERS
(5) LEADWELL Mdl. V40 CNC VMCs.
(3) LEADWELL Mdl. V30 CNC VMCs.
(3) LEADWELL Mdl. V30i CNC VMCs.
(2) SUPERMAX Mdl. Max-1 CNC VMCs, S/Ns 209865/304906.
<TAKAMAZ MDL. EX20 CNC LATHE
SUPERMAX MDL. TC-26/12T CNC LATHE WITH BARFEED
>FAST CUT
MDL. TNC10 CNC LATHE
NAKAMURA-TOME CNC LATHE
OKUMA HOWA Mdl. Act 3xt CNC Lathe, with barfeed, S/N 11014.
(6) TAKAMAZ Mdl. EX20 CNC Lathes.
SUPERMAX Mdl. TC-26/12T CNC Lathe, with barfeed.
1997 NAKAMURA-TOME Mdl. TMC20II CNC Lathe, S/N H01505.
1996 NAKAMURA-TOME Mdl. TMC20II CNC Lathe, S/N H010503.
SCREWDRIVER LATHENEW KO TUNG CNC Screwdriver Lathe.
6AVAILABLE
NEW KO TUNG CNC SCREWDRIVER MACHINE
7AVAILABLE
6 6
PARKER MAJESTIC SURFACE GRINDER
JONES & SHIPMAN MDL. 540LH SURFACE GRINDER<
KENT MDL. MD1420 SHAANJI SURFACE GRINDER
OKAMATO ACCUGAR MDL. 124N SURFACE GRINDER
BRIDGEPORT MANUAL MILL
INSPECTION: Wednesday, September 30 from 8:00 A.M. – 3:30 P.M.
CHIN HUNG MDL. CH-530X1000 MANUAL LATHE
SOUTH BEND MANUAL LATHE
DoALL MDL. 16 MANUAL LATHE
LATHESCHIN HUNG Mdl.CH-530x1000 Manual Lathe, S/N CH99085.
SOUTH BEND Manual Lathe, S/N 233CH.
DoALL Mdl 16 Manual Lathe.
MILLS1999 GENTIGER Mdl. SHCM97A Manual Mill, S/N 66965.
BRIDGEPORT Manual Mill, S/N 161746.
SURFACE GRINDERSPARKER MAJESTIC Surface Grinder, S/N 5727ZV91.
JONES & SHIPMAN Mdl. 540LH Surface Grinder, S/N B015558.
KENT Mdl. MD1420 Shaanji Surface Grinder, S/N 92009.
OKAMATO ACCUGAR Mdl. 124N Surface Grinder, S/N 6624.
CENTERLESS GRINDERSJAINNHER Centerless Grinders, (5) Mdl. 18 and (1) Mdl. 18B.
Visit Website for Details, Photos & Complete Terms
& Conditionswww.irsauction.com
77
APEX TOOL, NORTH CAROLINAFollowing Equipment Being Sold via Photo for Apex Tool, Apex, North Carolina Plant
To Arrange Inspection of the Following Machines Contact Britton New 817.706.0841 or [email protected]
MATTISON GRINDER EXPOSURE LIGHT AND VACUUM TABLEPATRIOT SCREEN PRINTER RUTHERFORD PRINTER
MATTISON Grinder, 18.5" x 12' table, PATRIOT Screen Printer, Exposure Equipment, RUTHERFORD Printer, used to print tape measures.
WHEELABRATOR TUMBLAST MACHINE
MARVEL SAW
MISCELLANEOUSDoALL Mdl. DBW-15 Band Saw, S/N 389-79140.
MARVEL Saw Band Saw.
(2) 1/2" Butt Welders.
(5) MAGNAT AUTOBUFF Mirror Polishers.
(15) 20 Cu. Ft. Vibe Bowls; (10) 10 Cu. Ft. Vibe Bowls; Bending Machine; Wheelabrator Tumblast Machine. MAGNAT AUTOBUFF MIRROR POLISHER
5AVAILABLE
ATS LASER ETCHER
2AVAILABLE
VIEW OF VIBE BOWLS
23AVAILABLE
JAINNHER CENTERLESS GRINDER
6AVAILABLE
<ITC MDL. INTERLAKEN PRESS
VIEW OF 10 CU. FT. VIBE BOWLS
PRESSESITC Mdl. Interlaken Press.
(2) V&O Punch Press, S/Ns 90ST-34, 90ST-4.
Visit Website for Details, Photos & Complete Terms & Conditions • www.irsauction.comQS-0028393
PresortedFirst Class Mail
U.S. PostagePAID
Eugene, OregonPermit No. 17
APPRAISERS
AUCTIONEERS LIQUIDATORS
RECOVERYINVESTM
ENT SERVICESPUBLIC AUCTION
LIVE ON-SITE WITH WEBCAST ONLINE BIDDING: You must register in advance for online bidding at this auction
Surplus Assets of
INSPECTION: Wednesday, September 30 from 8:00 A.M. – 3:30 P.M.
Garland, Texas
Thursday, October 1 at 10:00 A.M.
Sale Conducted by:
INVESTMENT RECOVERY SERVICES3421 NORTH SYLVANIA AVENUE, FORT WORTH, TX 76111
ASSOCIATION OFMACHINERY AND
EQUIPMENT APPRAISERS
Appraisers on Staff
ONLINE BIDDING: YOU MUST REGISTER IN ADVANCE FOR ONLINE BIDDING
AT THIS AUCTION
LARGE QUANTITY OF COLD HEADING EQUIPMENT • CNC VMCs • CNC LATHES • GRINDERS • CONVENTIONAL
MACHINING EQUIPMENT • MISCELLANEOUS SUPPORT
LARGE QUANTITY OF COLD HEADING EQUIP. • CNC VMCs • CNC LATHES • GRINDERS • CONVENTIONAL
MACHINING EQUIP. • MISC. SUPPORT EQUIP.
APEX TOOL GROUP
APEX TOOL GROUP
Surplus Assets of
3000 W. Kingsley Road Garland, Texas 75401
PUBLIC AUCTIONINSPECTION: Wednesday, September 30 from 8:00 A.M. – 3:30 P.M.
LIVE ON-SITE WITH WEBCASTThursday, October 1 at 10:00 A.M.
Apex Tool Group (ATG) is one of the largest manufacturers of professional hand and power tools in the world, serving the industrial, vehicle service and assembly, aerospace, electronics, construction and serious DIY markets.
MINSTER MDL. S1-300-36-42 SSSC