Upload
duongnhi
View
243
Download
0
Embed Size (px)
Citation preview
Literaturverzeichnis 169
Literaturverzeichnis
[ALS06] Al-Sulaiman, F. A.; Yilbas, B. S.; Ahsan, M.: CO2 laser cutting of a
carbon/carbon multi-lamelled plain-weave structure. Journal of Materials
Processing Technology, Band 173, Heft 3, 2006, Seiten 345-351.
[ALB13] Alberdi, A.; Suárez, A.; Artaza, T.; Escobar-Palafox, G.A.; Ridgway, K.:
Composite Cutting with Abrasive Water Jet. Procedia Engineering, Band 63,
2013, Seiten 421-429.
[BAI07] Bai, Y.; Vallée, T.; Keller, T.: Modeling of thermo-physical properties for FRP
composites under elevated and high temperature. Composites Science and
Technology, Band 67, Heft 15-16, 2007, Seiten 3098-3109.
[BAR12a] Bargel, H.-J.; Schulze, G.: Werkstoffkunde. 11. Auflage, Berlin, Heidelberg,
Dordrecht, London, New York, Verlag Springer Vieweg, 2012.
[BAR12b] Barth, F.-M.: Thermodynamik für Maschinenbauer. München, Verlag
Oldenburg, 2012.
[BAY09] Bayer, W.: Energie auf einen Blick. Ausgabe 2009, Statistisches Bundesamt
(Hrsg.), Wiesbaden, 2009.
[BOS15] Bossi, R.H.; Giurgiutiu, V.: Nondestructive testing of damage in aerospace
composites. Polymer Composites in the Aerospace Industry, 2015, Seiten 413-
448.
[BUN89] Bundy, F.P.: Pressure-temperature phase diagram of elemental carbon. Physica
A: Statistical Mechanics and its Applications, Band 156, Heft 1, 1989, Seiten
169-178.
[BUS89] Busch, H.; Holländer, W.; Levsen, K.; Schilhabel, J.; Trasser, F.J.; Neder, L.:
Aerosol formation during laser cutting of fibre reinforced plastics. Journal of
Aerosol Science, Band 20, Heft 8, 1989, Seiten 1473-1476.
[BLU13] Bluemel, S.; Staehr, R.; Jaeschke, P.; Stute, U.: Determination of Corresponding
Temperature Distribution within CFRP during Laser Cutting. Physics Procedia,
Band 41, 2013, Seiten 408-414.
[BLU14a] Bluemel, S.; Brede, S.; Jaeschke, P.; Suttmann, O.; Overmeyer, L.: Applying a
DOE model for the determination of appropriate process windows for
nanosecond laser processing of CFRP, ICALEO, 19.-23. Okt. 2014, San Diego,
Kalifornien, USA, Beitrag 707.
[BLU14b] Bluemel, S.; Jaeschke, P.; Suttmann, O.; Overmeyer, L.: Comparative study of
achievable quality cutting carbon fibre reinforced thermoplastics using
continuous wave and pulsed laser sources. Physics Procedia, Band 56, 2014,
Seiten 1143-1152.
[BLU15] Bluemel, S.; Staehr, R.; Jaeschke, P.; Suttmann, O.; Overmeyer, L.: Correlation
of internal and surface temperatures during laser cutting of epoxy-based carbon
fibre reinforced plastics. Journal of Reinforced Plastics and Composites. Band
34, Heft 8, 2015, Seiten 662-671.
[CAN14] Canisius, M.; Herzog, D.; Schmidt-Lehr, M.; Oberlander, M.; Albert, F.;
Broetje, S.; Ploog, P.; Emmelmann, C.: Virtual process chain for simulation of
heat affected zones during laser cutting of carbon fibre-reinforced plastics.
Tagungsband, NAFEMS Seminar “Simulation von Composites – Eine
geschlossene Prozesskette?”, 28.-29. Oktober 2014, Leipzig, Deutschland,
Seiten 274-282.
[CAN15a] Canisius, M.; Herzog, D.; Schmidt-Lehr, M.; Oberlander, M.; Direnga, J.;
Emmelmann, C.: Laser cutting of carbon fiber-reinforced plastic with an
absorber transparent for visible spectrum. Journal of Laser Applications, Band
27, 2015, Seite 032003.
© Springer-Verlag GmbH Deutschland 2018M. Canisius, Prozessgüte für das Laserstrahltrennen kohlenstofffaserverstärkter Kunststoffe, Light Engineeringfür die Praxis, https://doi.org/10.1007/978-3-662-56208-6
170 Literaturverzeichnis
[CAN15b] Canisius, M.; Oberlander, M.; Herzog, D.; Schmidt-Lehr, M.; Ploog, P.; Albert,
F.; Emmelmann, C.: Correlation between Temperature Field and Heat Affected
Zone during Laser Cutting of Carbon Fiber Reinforced Polymers. Tagungsband,
Lasers in Manufacturing Conference, 21.-25. Jun. 2015, München, Deutschland,
Beitrag 260.
[CAN16] Canisius, M.; Albert, F.: Remote Laser Drilling of Carbon Fiber Reinforced
Polymers supported by Simulation. 2016.
https://www.youtube.com/watch?v=mwt0IzXd8ig
[CAP95] Caprino, G.; Tagliaferri, V.; Govelli, L.: Cutting CFRP using CO2 laser with
multimodal Gaussian distribution. International Journal of Machine Tools and
Manufacture, Band 35, Heft 6, 1995, Seiten 831-840.
[CEN97] Cenna, A.A.; Mathew, P.: Evaluation of cut quality of fibre-reinforced plastics—
A review. International Journal of Machine Tools and Manufacture, Band 37,
Heft 6, 1997, Seiten 723-736.
[CEN02] Cenna, A.A.; Mathew, P.: Analysis and prediction of laser cutting parameters of
fibre reinforced plastics (FRP) composite materials. International Journal of
Machine Tools & Manufacture, Band 42, 2002, Seiten 105-113.
[CHA83] Chamis, C.C.: Simplified composite micro-mechanics equations for hygral,
thermal and mechanical properties. Tagungsband, 38th Annual Conference of
the Society of the Plastics Industry (SPI), Reinforced Plastics/Composites
Institute, 7.-11. Feb. 1983, Houston, Texas.
[CHE91] Chen, C.-C.; Cheng, W.: Material properties and laser cutting of composites.
Proceedings 23rd International SAMPE Technical Conference, 21.-24. Okt.
1991, Seiten 274-287.
[CHE98] Cheng, C.F.; Tsui, Y.C., Clyne, T.W.: Application of a three-dimensional heat
flow model to treat laser drilling of carbon fibre composites. Acta Materialia,
Band 46, Heft 12, 1998, Seiten 4273-4285.
[DAB72] Dabby, F.W.; Paek, U.-C.: High intensity laser-induced vaporization and
explosion of solid material. IEEE Journal of Quantum Electronics, Band QE-8,
1972, Seiten 106-111.
[DAH08] Dahotre, N. B.; Harimkar, S.: Laser Fabrication and Machining of Materials.
Berlin, Verlag Springer US, 2008.
[DAO16] Dao, D.Q.; Rogaume, T.; Luche, J.; Richard, F.; Valencia, L. B.; Ruban, S.:
Thermal degradation of epoxy resin/carbon fiber composites: Influence of
carbon fiber fraction on the fire reaction properties and on the gaseous species
release; Fire and Materials, Band 40, Heft 1, 2016, Seiten 27-47
[DEN07] Denkena, B.; Völkermeyer, F.; Kling, R.; Hermsdorf, J.: Novel UV-Laser
Applications for Carbon Fiber Reinforced Plastics. APT 07, International
Conference on Applied Production Technology, Production of Aircraft
Structures, 17.-19. September 2007, Bremen, Seiten 99-108.
[DII89] Di Ilio, A.; Tagliaferri, V.: Thermal damage in laser cutting of (0/90)2s
aramid/epoxy laminates. Composites, Band 20, Heft 2, 1989, Seiten 115-119.
[DII90] Di Ilio, A.; Tagliaferri, V.; Veniali, F.: Machining parameters and cut quality in
laser cutting of aramid fibre reinforced plastics. Materials and Manufacturing
Processes, Band 5, 1990, Seiten 591-608.
[DIT13] Dittmar, H.; Gäbler, F.; Stute, U.: UV-laser Ablation of Fibre Reinforced
Composites with Ns-Pulses. Physics Procedia, Band 41, 2013, Seiten 266-275.
[EMM13] Emmelmann, C.; Herzog, D.; Canisius, M.: Laser-Remote-Schneiden –
Großserienfähiges Trennverfahren für Faserverbundkunststoffe. 19. Nationales
Symposium SAMPE Deutschland e.V., 27.-28. Februar 2013, Hamburg, S. 68-
70.
[EMM11] Emmelmann, C.; Petersen, M.; Goeke, A.; Canisius, M.: Analysis of Laser
Literaturverzeichnis 171
Ablation of CFRP by Ultra-Short Laser Pulses with Short Wavelength. Physics
Procedia, Band 12, Teil A, 2011, Seiten 565-571.
[FAA17] Faas, S.; Freitag, C.; Boley, S.; Berger, P.; Weber, R.; Graf, T.: Flow speed of
the ablation vapors generated during laser drilling of CFRP with a continuous-
wave laser beam. Appl. Phys. A, Band 123, Heft 156, 2017.
[FEN94] Fenoughty, K. A.; Jawaid, A.; Pashby, I. R.: Machining of advanced engineering
materials using traditional and laser techniques. Journal of materials processing
technology, Band 42, 1994, Seiten 391-400.
[FIS12] Fischer, F.; Kreling, S.; Dilger, K.: Surface Structuring of CFRP by using
Modern Excimer Laser Sources. Physics Procedia, Band 39, 2012, Seiten 154-
160.
[FIS08] Fischer, U.; Gomeringer, R.; Heinzler, M.; Kilgus, R.; Näher, F.; Oesterle, S.;
Paetzold, H.; Stephan, A.: Tabellenbuch Metall. 44. Auflage, Haan-Gruiten,
Verlag Europa-Lehrmittel, Nourney, Vollmer, 2008.
[FRE15] Freitag, C.; Alter, L.; Weber, R.; Graf, T.: Theoretical and experimental
determination of the polarization dependent absorptance of laser radiation in
carbon fibers and CFRP. Tagungsband, Lasers in Manufacturing Conference,
21.-25. Jun. 2015, München, Deutschland, Beitrag 111.
[FRE12] Freitag, C.; Onuseit, V.; Weber, R.; Graf, T.: High-speed Observation of the
Heat Flow in CFRP During Laser Processing. Physics Procedia, Band 39, 2012,
Seiten 171-178.
[FRE14] Freitag, C.; Wiedenmann, M.; Negel, J.-P.; Loescher, A.; Onuseit, V.; Weber,
R.; Abdou-Ahmed, M.; Graf, T.: Ultra-Short Pulse Laser Processing of CFRP
with Kilowatt Average Power. Tagungsband, ICALEO, 19.-23. Okt. 2014, San
Diego, Kalifornien, USA, Beitrag 702.
[FRE09] French, P. W.; Naeem, M.; Clowes, J.; Sharp, M. C.: Fibre laser material
processing of Aerospace Composites. Tagungsband, Fifth International WLT-
Conference on Lasers in Manufacturing, 15.-18. Jun. 2009, München,
Deutschland, Beitrag 902.
[FRI13] Friedrich, H. E.: Leichtbau in der Fahrzeugtechnik. Wiesbaden, Verlag Springer
Vieweg, 2013.
[FUC13] Fuchs, A. N.; Schoeberl, M.; Tremmer, J.; Zaeh, M. F.: Laser Cutting of Carbon
Fiber Fabrics. Physics Procedia, Band 41, 2013, Seiten 372-380.
[FUC15] Fuchs, A. N.; Woldrich, T.; Heimhilger, K. M.; Zaeh, M. F.: Analytical Model
for Laser Cutting of Carbon Fiber Fabrics: Maximum Cutting Speed and the
Heat Affected Zone. Tagungsband, Lasers in Manufacturing Conference, 21.-25.
Jun. 2015, München, Deutschland, Beitrag 177.
[FUE15] Fürst, A.; Hipp, D.; Rose, M.; Klotzbach, A.; Hauptmann, J.; Wetzig, A.; Beyer,
E.: Experimental and Analytical Description of the Multi Wavelength Remote
Laser Ablation Process at Fiber Reinforced Polymers. Tagungsband, Lasers in
Manufacturing Conference, 21.-25. Jun. 2015, München, Deutschland, Beitrag
230.
[FUE13] Fürst, A.; Klotzbach, A.; Hühne, S.; Hauptmann, J.; Beyer, E.: Remote Laser
Processing of Composite Materials with Different Opto–Thermic Properties.
Physics Procedia, Band 41, 2013, Seiten 389-398
[FUJ13] Fujita, M.; Somekawa, T.; Miyanaga, N.: Micromachining of CFRP with Ultra-
Short Laser Pulses. Physics Procedia, Band 41, 2013, Seiten 636-639.
[GEI14] Geis, T.; Klingelhöller, C.; Hintze, W.: Constant Depth Scoring of Fibre
Reinforced Plastic Structures to Prevent Delamination. Procedia CIRP, Band 14,
2014, Seiten 205-210.
[GLA06] Glaser, S.: Colorants and special additives for laser welding. Konferenzband
Joining Plastics 2006, 25.-26. April 2006, London, UK, Beitrag 23.
172 Literaturverzeichnis
[GOE10] Goeke, A.; Emmelmann, C.: Influence of Laser Cutting Parameters on CFRP
Part Quality. Physics Procedia, Band 5, 2010, Seiten 253-258.
[GOE11] Goeke, A.: Laserstrahltrennen von Faserverbundkunststoffen. 1. Auflage,
Göttingen, Verlag Cuvillier, 2011.
[GRA12] Graf, T.; Weber, R.: Die besonderen Herausforderungen beim Laserschneiden
von CFK. In: Laser Magazin (2012) 1, Seiten 26-27.
[HAR12] Harada Y.; Kawai, K.; Suzuki, T.; Teramoto, T.: Evaluation of Cutting Process
on the Tensile and Fatigue Strength of CFRP Composites. Materials Science
Forum, Band 706-709, 2012, Seiten 649-654.
[HAT12] Hatwig, J.; Minnerup, P.; Zaeh, M.F.; Reinhart, G.; An automated path planning
system for a robot with a laser scanner for remote laser cutting and welding.
Tagungsband, 2012 IEEE International Conference on Mechatronics and
Automation (ICMA 2012), 5.-8. August 2012, Chengdu, China, Seiten 1323–
1328.
[HAR96] Hartwig, A.; Vitr, G.; Dieckhoff, S.; Hennemann, O. -D.: Surface treatment of
an epoxy resin by CO2 laser irradiation. Die Angewandte Makromolekulare
Chemie, Band 238, Nr. 4187, 1996, Seiten 177-189.
[HER08] Herzog, D., Jaeschke, P., Meier, O., Haferkamp, H.: Investigations on the
thermal effect caused by laser cutting with respect to static strength of CFRP.
International Journal of Machine Tools and Manufacture, Band 48, 2008, Seiten
1464-1473.
[HER14a] Herzog, D.; Canisius, M.; Schmidt-Lehr, M.; Rörig, B.; Schlude, N.; Hammer,
T.; Emmelmann, C.: Großserientauglicher Trennprozess – Endkonturzuschnitt
an CFK-Bauteilen durch Laser-Remote-Bearbeitung. In: Kunststoffe (2014) 6,
Seiten 46-49.
[HER14b] Herzog, D.; Schmidt-Lehr, M.; Canisius, M.; Oberlander, M.; Tasche, J.;
Emmelmann, C.: Laser cutting of CFRP using a 30 kW fiber laser.
Tagungsband, ICALEO, 19.-23. Okt. 2014, San Diego, Kalifornien, USA,
Beitrag 701.
[HER15b] Herzog, D.; Canisius, M.; Schmidt-Lehr, M.; Hergoss, P.; Daniel, C.; Hallmann,
S.; Emmelmann, C.; Scherner, M. V.: Investigations on the 3D Laser Cutting of
CFRP using a Nanosecond Pulse Fibre Laser. In: Applied Polymer Composites,
Band 2, Heft 4, 2015, Seiten 177-192.
[HER15a] Herzog, D.; Schmidt-Lehr, M.; Canisius, M.; Oberlander, M.; Emmelmann,C.:
Influence of laser cutting on handling, drape and infusion characteristics of
preforms. Proceedings of ICCST/10, 2.-4. September 2015, Lissabon, paper ID:
31.
[HIN07] Hintze, W.; Dose, F.; Hartmann, D.; Santos Quiroz, S.; Schwerdt, M.: Cutting,
abrasive and laser technologies for CFRP machining: State of the art and future
trends. Proceedings of the 2nd International Conference "Supply on the wings",
AIRTEC 2007, 24.-25.10.2007, Frankfurt (Main).
[HIN16] Hintze, W.; Cordes, M.; Geis, T.; Blühm, M.; Emmelmann, C.; Canisius, M.:
Laser Scored Machining of Fiber Reinforced Plastics to Prevent Delamination.
Procedia Manufacturing, Band 6, 2016, Seiten 1-8.
[HIN13] Hintze, W.; Hartmann, D.: Modeling of Delamination During Milling of
Unidirectional CFRP. Procedia CIRP, Band 8, 2013, Seiten 444-449.
[HOC13] Hocheng, H.; Tsai, H.-Y.: Advanced analysis of nontraditional machining. New
York, Verlag NY Springer, 2013.
[HOC93] Hocheng, H.; Pan, C.T.: Section area of heat affected zone in laser cutting of
carbon fibre-reinforced peek. Machining of Advanced Composites, MD-Vol.
45/PED-Vol. 66. ASME, 1993, Seiten 153-165.
[JAE10] Jaeschke, P.; Herzog, D.; Noelke, C.; Henning, B,; Haferkamp, H.:
Literaturverzeichnis 173
Investigations into the Sealing of Heat Damaged Areas by Applying Polymer
Powders During Laser Cutting of Carbon Fiber Reinforced Composites.
Advanced Engineering Materials, Band 12, Nr. 7, 2010, Seiten 587-590.
[JAE14] Jaeschke, P.; Kern, M.; Stute, U.; Kracht, D.; Haferkamp, H.: Laser processing
of continuous carbon fibre reinforced polyphenylene sulfide organic sheets -
correlation of process parameters and reduction in static tensile strength
properties. Journal of Thermoplastic Composite Materials, Band 27, Nr. 3, 2014,
Seiten 324-337.
[JAR13] Jarwitz, M.; Onuseit, V.; Weber, R.; Graf, T.: Spectral Analysis of Laser
Processing of Carbon Fiber Reinforced Plastics. Physics Procedia, Band 41,
2013, Seiten 496-501.
[JUN13] Jung, K.-W.; Kawahito Y.; Katayama S.: Ultra High Speed Laser Cutting of
CFRP Using a Scanner Head. Transactions of JWRI, Band 42, Nr. 2, 2013,
Seiten 9-14.
[KIM96] Kim, M.J., Majumdar, P.: Boundary element method in evaporative laser
cutting. Applied Mathematical Modelling, Band 20, Heft 4, 1996, Seiten 274-
282.
[KIM00] Kim, M.J.: Transient evaporative laser-cutting with boundary element method.
Applied Mathematical Modelling, Band 25, Heft 1, 2000, Seiten 25-39.
[KIM04] Kim, M.J.: Transient evaporative laser cutting with moving laser by boundary
element method. Applied Mathematical Modelling, Band 28, Heft 10, 2004,
Seiten 891-910.
[KIM01] Kim, M.J.; Zhang, J.: Finite element analysis of evaporative cutting with a
moving high energy pulsed laser. Applied Mathematical Modelling, Band 25,
Heft 3, 2001, Seiten 203-220.
[KLO11a] Klotzbach, A.; Hauser, M.; Beyer, E.: Laser Cutting of Carbon Fiber Reinforced
Polymers using Highly Brilliant Laser Beam Sources. Physics Procedia, Band
12, Teil A, 2011, Seiten 572-577.
[KLO11b] Klotzbach, A.; Vessio, P.; Klotzbach, U.; Hauptmann, J.: Investigations in
Remote Cutting of Carbon Fiber Composite Materials. Tagungsband, ICALEO,
23.-27. Okt. 2011, Orlando, Florida, USA, Beitrag 1201.
[KRE13] Kreling, S.; Fischer, F.; Delmdahl, R.; Gäbler, F.; Dilger, K.: Analytical
Characterization of CFRP Laser Treated by Excimer Laser Radiation. Physics
Procedia, Band 41, 2013, Seiten 282-290.
[KRU96] Kruger, J.; Kautek, W.: Femtosecond pulse visible laser processing of fibre
composite materials. Applied Surface Science, Band 106, 1996, Seiten 383-389.
[LEO09] Leone, C.; Pagano, N.; Lopresto, V.; De Iorio, I.: Solid state Nd:YAG laser
cutting of CFRP sheet: Influence of process parameters on kerf geometry and
HAZ. Proceedings of 17th Int. Conf. on Composite Materials - ICCM-17,
Edinburgh UK, 2009, Seiten 1-10.
[LEO13] Leone, C.; Papa, I.; Tagliaferri, F.; Lopresto, V.: Investigation of CFRP laser
milling using a 30W Q-switched Yb:YAG fiber laser: Effect of process
parameters on removal mechanisms and HAZ formation. Composites Part A:
Applied Science and Manufacturing, Band 55, 2013, Seiten 129-142.
[LEO14] Leone, C.; Genna, S.; Tagliaferri, V.; Fibre laser cutting of CFRP thin sheets by
multi-passes scan technique. Optics and Lasers in Engineering, Band 53, 2014,
Seiten 43-50.
[LI10a] Li, Z.L.; Chu, P.L.; Zheng, H.Y.; Lim, G.C.; Li, L.; Marimuthu, S.; Negarestani,
R.; Sheikh, M.; Mativenga, P.: Laser machining of carbon fibre-reinforced
plastic composites. Advances in Laser Materials Processing, 2010, Seiten 136-
177.
[LI08] Li, Z.L.; Chu, P.L.; Zheng, H.Y.; Lim, G.C.; Li, L.; Negarestani, R.; Marimuthu,
174 Literaturverzeichnis
S.; Sheikh, M.; Mativenga, P.: Process Development of Laser Machining of
Carbon Fibre Reinforced Plastic Composites. Tagungsband, ICALEO, 20.-23.
Okt. 2008, Temecula, Kalifornien, USA, Beitrag 406.
[LI09] Li, Z. L.; Chu, P. L.; Zheng, H. Y.; Lim, G. C.: Process development of laser
machining of carbon fibre reinforced plastic composites. SIMTech technical
reports, Band 10, Nr. 1, 2009.
[LI10b] Li, Z.L.; Zheng, H.Y.; Lim, G.C.; Chu, P.L.; Li, L.: Study on UV laser
machining quality of carbon fibre reinforced composites. Composites Part A:
Applied Science and Manufacturing, Band 41, Heft 10, 2010, Seiten 1403-1408.
[LIE98] Liebelt, S.: Analyse und Simulation des Laserstrahlschneidens von
Faserverbundkunststoffen. Berlin, Verlag PTZ [u.a.], 1998.
[LOP09] Lopez de Lacalle, N.; Lamikiz, A.; Campa, F.J.; Valdivielso, A.; Etxeberria, I.:
Design and Test of a Multitooth Tool for CFRP Milling, Journal of Composite
Materials 43, 2009, Seiten 3275-3290.
[MAL95] Malkusch, W.; Rehn, B.; Bruch, J.; In vitro method for medical risk assessment
of laser fumes. Optics & Laser Technology, Band 27, Heft 1, 1995, Seiten 39-
43.
[MAR95] Marek, R.; Götz, W.: Numerische Lösung von partiellen Differentialgleichungen
mit finiten Differenzen : eine methodische Einführung am Beispiel der
Wärmeleitung. Buchloe, Verlag Moreno, 1995.
[MAT99a] Mathew, J.; Goswami, G. L.; Ramakrishnan, N.; Naik, N. K.: Parametric studies
on pulsed Nd:YAG laser cutting of carbon fibre reinforced plastic composites.
Journal of Materials Processing Technology, Band 89–90, 1999, Seiten 198-203.
[MAT99b] Matthams, T.J.; Clyne, T.W.: Mechanical properties of long-fibre thermoplastic
composites with laser drilled microperforations: 1. Effect of perforations in
consolidated material. Composites Science and Technology, Band 59, Heft 8,
1999, Seiten 1169-1180.
[MAT99c] Matthams, T.J.; Clyne, T.W.: Mechanical properties of long-fibre thermoplastic
composites with laser drilled microperforations: 2. Effect of prior plastic strain.
Composites Science and Technology, Band 59, Heft 8, 1999, Seiten 1181-1187.
[MEL86] Mello, M.D.; Laser Cutting Of Non-Metallic Composites, Proceedings SPIE
0668, Laser Processing: Fundamentals, Applications, and Systems Engineering,
1986, Seiten 288-290.
[MOD96] Modest, M.F.: Three-dimensional, transient model for laser machining of
ablating/decomposing materials. International Journal of Heat and Mass
Transfer, Band 39, Heft 2, 1996, Seiten 221-234.
[MUE15] Müller-Hummel, P.: Werkzeuglösungen zur Bearbeitung von CFK – Praxistests
zum Vergleich der Technologien „Wasserstrahlschneiden“ und „Mechanische
Bearbeitung“, unter: http://www.carbon-composites.eu/sites/carbon-
composites.eu/files/anhaenge/gruppen/12/12/13/02_fi_mp_bf_4.pdf (abgerufen
am 04.02.2015).
[MUC13] Mucha, P.; Speker, N.; Weber, R.; Graf, T.: Momentum and velocity of the
ablated material in laser machining of carbon fiber preforms. Applied Physics A,
Band 113, Heft 2, 2013, Seiten 361-366.
[MUC14]
Mucha, P.; Weber, R.; Speker, N.; Berger, P,; Sommer, B.; Graf, T.: Calibrated
Heat Flow Model for Determining the Heat Conduction Losses in Laser Cutting
of CFRP. Physics Procedia, Band 56, 2014, Seiten 1208-1217.
[MUC15] Mucha, P.; Qualitäts- und produktivitätsbeeinflussende Mechanismen beim
Laserschneiden von CF und CFK. München, Herbert Utz Verlag, 2015.
[MUR15] Muramatsu, M.; Harada, Y.; Suzuki, T.; Niino, H.: Infrared stress measurements
of thermal damage to laser-processed carbon fiber reinforced plastics.
Composites Part A: Applied Science and Manufacturing, Band 68, 2015, Seiten
Literaturverzeichnis 175
242-250.
[NN12] N.N.: Dritter Fortschrittsbericht der Nationalen Plattform Elektromobilität.
Gemeinsame Geschäftsstelle Elektromobilität der Bundesregierung (Hrsg.),
Bundesministerium für Verkehr, Bau und Stadtentwicklung, Bonn, 2012.
[NN14] N.N.: Verkehr im Überblick. Fachserie 8 Reihe 1.2 - 2013, Statistisches
Bundesamt (Hrsg.), Wiesbaden, 2014.
[NEG12] Negarestani, R.; Li, L.: Laser machining of fibre-reinforced polymeric
composite materials. Machining Technology for Composite Materials, 2012,
Seiten 288-308.
[NEG10a] Negarestani, R.; Li, L.; Sezer, H. K.; Whitehead, D.; Methven, J.: Nano-second
pulsed DPSS Nd:YAG laser cutting of CFRP composites with mixed reactive
and inert gases. International Journal of Advanced Manufacturing Technology,
Band 49, Heft 5-8, 2010, Seiten 553-566
[NEG10b] Negarestani, R.; Sundar, M.; Sheikh, M.A.; Mativenga, P.; Li, L.; Li, Z. L.; Chu,
P.L.; Khin, C.C.; Zheng, H.Y.; LIM, G.C.: Numerical simulation of laser
machining of carbon-fibre-reinforced composites. Proceedings of the Institution
of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Band
224, Heft 7, 2010, Seiten 1017-1027.
[NEI14] Neitzel, M.; Mitschang, P.; Breuer, U.: Handbuch Verbundwerkstoffe:
Werkstoffe, Verarbeitung, Anwendung. München, Verlag Hanser, Carl, 2014.
[NII13] Niino, H.; Kawaguchi, Y.; Sato, T.; Narazaki, A.; Kurosaki, R.; Muramatsu, M.;
Harada, Y.; Wakabayashi, K.; Nagashima, T.; Kase, Z.; Matsushita, M.;
Furukawa, K.; Nishino, M.: Laser cutting of carbon fiber reinforced plastics
(CFRP) by 1kW cw fiber laser irradiation. Proc. SPIE 8607, Laser Applications
in Microelectronic and Optoelectronic Manufacturing (LAMOM) XVIII, Beitrag
860714, 2013.
[NII14] Niino, H.; Kawaguchi, Y.; Sato, T.; Narazaki, A.; Kurosaki, R.; Muramatsu, M.;
Harada, Y.; Anzai, K.; Wakabayashi, K.; Nagashima, T.; Kase, Z.; Matsushita,
M.; Furukawa, K.; Nishino, M.: Laser Cutting of Carbon Fiber Reinforced
Thermo-Plastic (CFRTP) by IR Laser Irradiation. JLMN-Journal of Laser
Micro/Nanoengineering, Band 9, Nr. 2, 2014, Seiten 180-186.
[OBE15] Oberlander, M.; Schmidt-Lehr, M.; Herzog, D.; Canisius, M.; Emmelmann, C.:
Laser-remote-cutting of large-scale semi-finished carbon-fiber products using a
solid state laser. Tagungsband, Lasers in Manufacturing Conference, 21.-25. Jun.
2015, München, Deutschland, Beitrag 137.
[OHK14] Ohkubo, T.; Tsukamoto, M.; Sato, Y.: Numerical Simulation of Laser Beam
Cutting of Carbon Fiber Reinforced Plastics. Physics Procedia, Band 56, 2014,
Seiten 1165-1170.
[ONU15] Onuseit, V.; Prieß, T.; Wiedenmann, M.; Freitag, C.; Faisst, B.; Giedl-Wagner,
R.; Rettich, T.; Weber, R.; Middendorf, P.; Graf, T.: Productive Laser
Processing of CFRP. Tagungsband, Lasers in Manufacturing Conference, 21.-
25. Jun. 2015, München, Deutschland, Beitrag 268.
[PAN96] Pan, C. T.; Hocheng, H.: The anisotropic heat-affected zone in the laser
grooving of fiber-reinforced composite material. Journal of Materials Processing
Technology, Band 62, Heft 1–3, 1996, Seiten 54-60.
[PAN98] Pan, C. T.; Hocheng, H.: Prediction of laser-induced thermal damage of fiber
mat and fiber MatUD reinforced polymers. Journal of Materials Engineering and
Performance, Band 7, Heft 6, 1998, Seiten 751-756.
[PAU82] Paufler, P: Phasendiagramme. Braunschweig, Wiesbaden, Verlag: Vieweg,
1982.
[PIE94] Pietro, M.; Cristina, R.; Marco, B.; Beyer, E.; Cantello, M.; La Rocca, A.V.;
Laude, L.D.; Olsen, F.O.; Sepold, G.: Mathematical modelling of laser treatment
176 Literaturverzeichnis
processes. Proceedings SPIE 2207, Laser Materials Processing: Industrial and
Microelectronics Applications, 07. September 1994, Seiten 256-268.
[POP05] Poprawe, R.: Lasertechnik für die Fertigung : Grundlagen, Perspektiven und
Beispiele für den innovativen Ingenieur. Berlin, Heidelberg, New York, Verlag
Springer, 2005.
[ROD02] Rodden, W.S.O.; Kudesia, S.S.; Hand, D.P.; Jones, J.D.C.: A comprehensive
study of the long pulse Nd:YAG laser drilling of multi-layer carbon fibre
composites. Optics Communications, Band 210, Heft 3-6, 2002, Seiten 319-328.
[RIV12] Riveiro, A.; Quintero, F.; Lusquiños, F.; del Val, J.; Comesaña, R.; Boutinguiza,
M.; Pou, J.: Experimental study on the CO2 laser cutting of carbon fiber
reinforced plastic composite. Composites Part A: Applied Science and
Manufacturing, Band 43, Heft 8, 2012, Seiten 1400-1409.
[ROM12] Romoli, L.; Fischer, F.; Kling, R.: A study on UV laser drilling of PEEK
reinforced with carbon fibers. Optics and Lasers in Engineering, Band 50, Heft
3, 2012, Seiten 449-457.
[SAT15] Sato, Y.; Tsukamoto, M.; Matsuoka, F.; Yamashita, K.; Masuno, S.: Effect of
several gas ambiences on HAZ suppression in CFRP cutting with nanosecond
laser. Tagungsband, Lasers in Manufacturing Conference, 21.-25. Jun. 2015,
München, Deutschland, Beitrag 248.
[SAT13] Sato, Y.; Tsukamoto, M.; Nariyama, T.; Nakai, K.; Takahashi, K.; Masuno, S.;
Nakano, H.: Experimental study of CFRP cutting with nanosecond lasers.
Transactions of JWRI, Band 42, Nr. 1, 2013, Seiten 23-26.
[SCH13a] Schilling, N.; Lasagni, A.; Klotzbach, U.: Energy Dependent Processing of Fiber
Reinforced Plastics with Ultra Short Laser Pulses. Physics Procedia, Band 41,
2013, Seiten 421-427.
[SCH15a] Schmidt-Lehr, M.; Oberlander, M.; Herzog, D., Canisius, M.; Radek, M.;
Emmelmann, C.: Investigations on the process strategy of laser remote cutting of
carbon reinforced plastics with a thickness of more than 3 mm. ICCM20,
Copenhagen, 19.-25. Jul. 2015.
[SCH15b] Schneider, F.; Wolf, N.; Engelmann, C.; Moll, W.; Petring D.: Laser Cutting and
Joining in a Novel Process Chain for Fibre Reinforced Plastics. Tagungsband,
Lasers in Manufacturing Conference, 21.-25. Jun. 2015, München, Deutschland,
Beitrag 127.
[SCH13b] Schneider, F.: Wolf, N.; Petring, D.: High Power Laser Cutting of Fiber
Reinforced Thermoplastic Polymers with cw- and Pulsed Lasers. Physics
Procedia, Band 41, 2013, Seiten 415-420.
[SCH05] Schürmann, H.; Konstruieren mit Faser-Kunststoff-Verbunden. Berlin,
Heidelberg, New York, Verlag Springer, 2005.
[SHA13] Sha, W.: Steels – From Materials Science to Structural Engineering. London,
Heidelberg, New York, Dordrecht, Verlag Springer, 2013.
[SHA02] Shanmugam, D.K.; Chen, F.L.; Siores, E.; Brandt, M.: Comparative study of
jetting machining technologies over laser machining technology for cutting
composite materials. Composite Structures, Band 57, Heft 1-4, 2002, Seiten 289-
296.
[SHE95] Sheng, P.; Chryssolouris, G.: Theoretical Model of Laser Grooving for
Composite Materials. Journal of Composite Materials, Band 29, 1995, Seiten 96-
112
[SHE93] Sheng, P.; Chryssolouris, G.: Comparison of surface quality improvement
techniques for laser grooving of composite materials. Manufacturing Science
and Engineering. PED-Vol. 64. ASME, 1993, Seiten 795-801.
[SHY13] Shyha, I.: An Investigation into CO2 Laser Trimming of CFRP and GFRP
Composites. Procedia Engineering, Band 63, 2013, Seiten 931-937.
Literaturverzeichnis 177
[SPR67] Springer, G.S.; Tsai, S.W.: Thermal Conductivities of Unidirectional Materials.
Journal of Composite Materials, Band 1, 1967, Seiten 166-173.
[STO12] Stock, J.; Zaeh, M. F.; Conrad, M.: Remote Laser Cutting of CFRP:
Improvements in the Cut Surface. Physics Procedia, Band 39, 2012, Seiten 161-
170.
[STO14] Stock, J. W.; Zaeh, M. F.; Spaeth, J. P.: Remote laser cutting of CFRP: Influence
of the edge quality on fatigue strength . Proc. SPIE 8963, High-Power Laser
Materials Processing: Lasers, Beam Delivery, Diagnostics, and Applications III,
Band 8963, 2014.
[STO15] Stock, J. W.; Zaeh, M. F.: Influence of remote laser cutting on the fatigue
strength of CFRP. Tagungsband, Lasers in Manufacturing Conference, 21.-25.
Jun. 2015, München, Deutschland, Beitrag 166.
[TAG87] Tagliaferri, V.; Crivelli Visconti, I.; Di Ilio, A.: Machining of fibre reinforced
materials with laser beam: cut quality evaluation. Sixth international conference
on composite materials, Band 1, 1987, Seiten 1190-1198.
[TAG85] Tagliaferri, V.; Di Ilio, A.; Crivelli Visconti, I.: Laser cutting of fibre-reinforced
polyesters. Composites, Band 16, Nr. 4, 1985, Seiten 317-325.
[TAK15] Takahashi, K.; Tsukamoto, M.; Masuno, S.; Sato, Y.; Yoshida, H.; Tsubakimoto,
K.; Fujita, H.; Miyanaga, N.; Fujita, M.; Ogata, H.: Influence of Laser Scanning
Conditions on CFRP Processing with a Pulsed Fiber Laser. Journal of Materials
Processing Technology, Band 222, 2015, Seiten 110-121
[TRA92] Trasser, F.-J.: Laserstrahlschneiden von Verbundkunststoffen :
werkstofforientierte Prozessauslegung des Laserstrahlschneidens von aramid-
und glasfaserverstärkten Duroplasten. Düsseldorf, Verlag VDI-Verl., 1992.
[SAT14] Sato, Y.; Tsukamoto, M.; Matsuoka, F.; Takahashi, K.; Masuno, S.: Nanosecond
Laser Processing of CFRP in Ar Gas Ambience for HAZ Reduction.
Tagungsband, ICALEO, 19.-23. Okt. 2014, San Diego, Kalifornien, USA,
Beitrag 703.
[UHL14] Uhlmann, E.; Sammler, F.; Richarz, S.; Heitmüller, F.; Bilz, M.: Machining of
Carbon Fibre Reinforced Plastics. Procedia CIRP, Band 24, 2014, Seiten 19-24.
[UHL99] Uhlmann, E.; Spur, G.; Hocheng, H.; Liebelt, S.; Pan, C.T.: The extent of laser-
induced thermal damage of UD and crossply composite laminates. International
Journal of Machine Tools & Manufacture, Band 39, 1999, Seiten 639-650.
[USH12] Ushida, K.; Inami, W.; Shimamura, Y.; Kawata, Y.: Characteristic analysis of
CFRP cutting with nanosecond pulsed laser. Journal of Advanced Research in
Physics, Band 3, Nr. 1, 011211, 2012.
[VAV14] Vavilov, V.P.; Modeling and characterizing impact damage in carbon fiber
composites by thermal/infrared non-destructive testing. Composites Part B:
Engineering, Band 61, 2014, Seiten 1-10.
[VDI13] VDI-Gesellschaft Verfahrenstechnik und Chemieingenieurwesen: VDI-
Wärmeatlas. Berlin, Verlag Springer Vieweg, 2013.
[VOI06] Voisey, K.T.; Fouquet, S.; Roy, D.; Clyne, T.W.: Fibre swelling during laser
drilling of carbon fibre composites. Optics and Lasers in Engineering, Band 44,
Heft 11, 2006, Seiten 1185-1197.
[WAL15] Walter, J.; Hennigs, C.; Huse, M.; Hustedt, M.; Kaierle, S.; Overmeyer, L.:
Analysis of potentially hazardous substances emitted during laser processing of
carbon fiber reinforced plastics. Tagungsband, Lasers in Manufacturing
Conference, 21.-25. Jun. 2015, München, Deutschland, Beitrag 147.
[WAL14] Walter, J.; Hustedt, M.; Staehr, R.; Kaierle, S.; Jaeschke, P.; Suttmann, O.;
Overmeyer, L.: Laser Cutting of Carbon Fiber Reinforced Plastics –
Investigation of Hazardous Process Emissions. Physics Procedia, Band 56, 2014,
Seiten 1153-1164.
178 Literaturverzeichnis
[WEB11] Weber, R.; Hafner, M.; Michalowski, A.; Graf, T.: Minimum Damage in CFRP
Laser Processing. Physics Procedia, Band 12, Teil B, 2011, Seiten 302-307.
[WEB12] Weber, R.; Freitag, C.; Kononenko, T. V.; Hafner, M.; Onuseit, V.; Berger, P.;
Graf, T.: Short-pulse laser processing of CFRP. Physics Procedia, Band 39,
2012, Seiten 137-146.
[WEB14] Weber, R.; Graf, T.; Berger, P.; Onuseit, V.; Wiedenmann, M.; Freitag, C.;
Feuer, A.: Heat accumulation during pulsed laser materials processing. Optics
express, Band 22, Nr. 9, 2014, Seiten 11312-11324.
[WIE15] Wiedenmann, M.; Freitag, C.; Haug, M.; Onuseit, V.; Weber, R.; Graf, T.:
Cutting of CFRP with short-pulsed lasers at 1 μm and 10 μm wavelength and
average powers of more than 1 kW. Tagungsband, Lasers in Manufacturing
Conference, 21.-25. Jun. 2015, München, Deutschland, Beitrag 143.
[WIS10] Wissemborski, R.; Klein, R.: Welding and Marking of Plastics with Lasers –
New Absorbers increase Possibilities for Application. Laser Technik Journal,
Band 7, Heft 5, 2010, Seiten 19-22.
[WIT14] Witten, E.; Kühnel, M.: Composites-Marktbericht 2014, unter: http://www.avk-
tv.de/files/20141008_marktbericht_gfkcfk.pdf (abgerufen am 16.01.2015).
[WOL11] Wolynski, A.; Herrmann, T.; Mucha, P.; Haloui, H.; L’huillier, J.: Laser ablation
of CFRP using picosecond laser pulses at different wavelengths from UV to IR.
Physics Procedia, Band 12, Teil B, 2011, Seiten 292-301.
[YOU08] Young, T.M.; Impact of Nd-YAG Laser Drilling on the Fatigue Characteristics
of APC-2A/AS4 Thermoplastic Composite Material. Journal of Thermoplastic
Composite Materials, Band 21, Nr. 6, 2008, Seiten 543-555.
[YU97] Yu, L.M.: Three-dimensional finite element modelling of laser cutting. Journal
of Materials Processing Technology, Band 63, Hefte 1-3, 1997, Seiten 637-639.
[ZHA98] Zhang, Z.; Modest, M. F.: Temperature-Dependent Absorptances of Ceramics
for Nd:YAG and CO2 Laser Processing Applications. Journal of Heat Transfer,
Band 120, Heft 2, 1998, Seiten 322-327.