Embed Size (px)
Citation preview
Light Commercial Ventilation SolutionsHeat / Energy Recovery Ventilators
Syst
emai
r Inc
. • A
pril,
201
6 •
Art.
412
739
Fantech reserves the right to modify, at any time and without notice, any or all of its products’ features, designs, components and specifications to maintain their technological leadership position. The application rendering presented in this brochure is for visual presentation purposes only. Please, contact a building professional for technical guidance.
Customer Support:Canada [email protected]
Send Orders:Canada [email protected]
Distributed Locally by:
12500
SHR 14104 / SHR 14105R
SHR 11004 / SHR 11005R
SHR 8004 / SHR 8005R
SHR 6904 / SHR 6905R
1000 1500
l/s
cfm750500250
0 30050 150 600 700450
SHR / SHR-R Series 250-1428 cfm
Compact heat recovery ventilators with side connection and an aluminum heat exchanger core that transfers sensible energy between supply and exhaust air streams. All units come with low voltage control connections. Low voltage controls are sold separately.
SER Series 200-1300 cfm
Compact energy recovery ventilators with side connection and an energy exchanger core that transfers the heat and moisture from the supply air to the exhaust air. All units come with low voltage connections for controls that are sold separately.
12500 1000 1500
l/s
cfm750500250
0 30050 150 600 700450
SER 6004
SER 9504
SER 13004
Canada - Bouctouche, NB
Product Range think comfort ventilationFantech’s light commercial air handling units can be used in various applications from swimming pools and small offices to larger commercial applications. Common to all, each and every system and component has been developed with energy savings in mind. Heat exchangers, motors and fan units have all undergone extensive testing, both in the laboratory and in the field, in order to exceed current and future demands for low energy consumption.
Our products are designed for a long service life, which leads to the least amount of environmental impact over time. And, to ensure easy installation, many of our units feature control systems that are enabled for plug-and-play, i.e. simple, stress-free start-up.
Accessories
MDEHDehumidistat
RTS 3Electronic Timer
Eco-TouchTM Wall Control
EDF 1/EDF1RElectronic Control
EDF 7Electronic Dehumidistat
RTS 2Electronic Timer
IR Iris Damper
MGS Supply Grille
MGEExhaust Grille
1EFFICIENT FANS
Backward inclined motorized impellers give more airflow and better efficiency. 2ELECTRONIC
CONTROL BOARD
Superior microprocessor technology efficiently controls operation of unit. 3REVERSIBLE
DOOR PANELS
The field reversible door panel are standard on these units. Access doors can be reversed to fit requirements. 4EASE OF
MAINTENANCE
The motors and cores are mounted on a removable sliding bases for quick and easy serviceability.
Supply fan modulation defrost – 04 Models
The supply fan's speed is intermittently modulated while the exhaust fan is set to run on high speed. This allows the energy recovery core to defrost to prevent freezing.
Advantages• This is a simple and robust frost prevention system
Application noteIf you will be integrating the HRV into a central air handling unit we recommend selecting the Recirculation Defrost models since they can actively block the outdoor air port with a damper mechanism, preventing outdoor air from entering the building when not being used.
Recirculation defrost – 05R Models
When the frost conditions exist, a mechanical damper in the HRV closes the outdoor air inlet and opens a fifth duct connection. The exhaust fan shuts off while the supply fan goes on high speed. The supply fan then takes warm building air from the fifth duct connection and pulls it through the heat recovery core and delivers it back to the building. The fifth duct connection can either remain un-ducted in which case recirculation air is taken from the mechanical room where the HRV is located and used to re-energize the core. Alternatively a dedicated duct can be installed so the designer can take the recirculated air from a specific location in the building*.
Advantages• The most energy efficient and aggressive frost prevention• Ideal for higher humidity indoor conditions or colder outdoor conditions• Allows the designer to select from where recirculated air is taken• Provides a ‘recirculation’ mode that allows for the building air to be
recirculated without bringing in fresh air.
Defrost MechanismsA defrost mechanism is provided to ensure that when the outdoor air conditions are too cold, the HRV periodically re-energizes the energy exchanger
to prevent its freeze-up. When the outdoor air introduced into the HRV falls
below 23°F (-5°C), the defrost mechanism is activated and will cycle between normal operation and defrost for around 30 minutes and 5 minutes respectively,
until the outdoor air is warmer than 23°F (-5°C). Two defrost mechanisms are available on the commercial Fantech HRV.
* Recommended when HRV is used as a pre-conditioner to a central air handling unit.
SHR Series - Heat Recovery CoreThe aluminum fixed-plate, cross frow heat recovery exchanger is capable of transferring heat between airstreams. The heat recovery cores are manufactured in our facility to assure the highest level of quality.
SER Series - Energy Recovery CoreThe dense polymer membrane uses selective transfer technology to allow heat and water vapour to permeate through, while blocking contaminant compounds. The transfer is driven by temperature and humidity differentials between the airstreams.
Pool Applications SHR8005R & SHR14105RUsing a Fantech Heat Recovery Ventilator provides an economical, energy saving solution to pool ventilation and dehumidification in climates where the air is dryer outside than inside. Heat from the exhaust air is transferred to the incoming cooler air raising the temperature and lowering the load on the HVAC system. The unit is designed to reduce the occurrence of condensation in the indoor environment by first operating in the recirculation mode, moving air around the structure, keeping windows dry and eliminating troublesome cold spots, then switching to air exchange mode as needed.
Light Commercial Ventilation Solutions – HRV / ERV Ventilators Light Commercial Ventilation Solutions – HRV / ERV Ventilators Light Commercial Ventilation Solutions – HRV / ERV Ventilators
