Upload
stella-sheryl-horton
View
273
Download
4
Embed Size (px)
DESCRIPTION
1. Background of development - High speed and heavy load - Maximum speed: 2000mm/s, Maximum work load: 25kg Maximum stroke Applicable to strokes up to 3000mm (LEFB40) Maximum acceleration / deceleration: 20,000mm/s Max. 20,000mm/s achievable depending on transfer conditions.
Citation preview
Electric Actuator
LEFB Belt Drive AC Servo
Slider type
1. Background of development
- High speed and heavy load- High speed and heavy load - Maximum speed: 2000mm/s, Maximum work load: 25kg- Maximum speed: 2000mm/s, Maximum work load: 25kg
Maximum strokeMaximum stroke Applicable to strokesApplicable to strokes up to 3000mm (LEFB40)up to 3000mm (LEFB40)
Maximum acceleration / deceleration: Maximum acceleration / deceleration: 20,000mm/s20,000mm/s
Max. 20,000mm/s achievable depending on transfer Max. 20,000mm/s achievable depending on transfer conditions.conditions.
Easy mountingEasy mountingMounting without removal of external parts such as the cover is Mounting without removal of external parts such as the cover is possible.possible.
AppearanceAppearance Seal band standardizedSeal band standardized
Selectable motor mounting directionsSelectable motor mounting directions Can be mounted on the top or bottom depending on interference Can be mounted on the top or bottom depending on interference
with work pieces.with work pieces.
High speed and long stroke transfer with the AC High speed and long stroke transfer with the AC servo motorservo motor
LEFB25LEFB25 Max. transfer weight 5kg, Max. speed 2000mm/s, Stroke 2000mmMax. transfer weight 5kg, Max. speed 2000mm/s, Stroke 2000mm LEFB32LEFB32 Max. transfer weight 15kg, Max. speed 2000mm/s, Stroke Max. transfer weight 15kg, Max. speed 2000mm/s, Stroke
2500mm2500mm LEFB25LEFB25 Max. transfer weight 25kg, Max. speed 2000mm/s, Stroke Max. transfer weight 25kg, Max. speed 2000mm/s, Stroke
3000mm3000mm
2. Features
Work piece
General industrial machineryGeneral industrial machinery
All industries All industries related to transfersrelated to transfers
3. Applications
Belt type
Size
LEFB25 LEFB32 LEFB40
Motor type/ Capacity
AC servo motor/ 100W
AC servo motor/ 200W
AC servo motor/ 400W
Work load (kg)
Horizontal 5 15 25
Max. speed (mm/s) 2000 2000 2000
Lead equivalent (mm) 54
Belt width 9 15 20
Positioning repeatability (mm) +/-0.08
Stroke (mm) ~2000 ~2500 ~3000
4. Specifications and performance
5. Construction
No. Description Material Note1 Body Aluminum alloy Anodized
2 Rail guide
3 Belt
4 Belt holder A Carbon steel Chromate5 Belt holder Aluminum alloy Anodized6 Table Aluminum alloy Anodized7 Blanking plate Aluminum alloy Anodized
8 Seal band pusher Synthetic resin
9 End block Aluminum alloy Painting
10 End block cover
11 Pulley holder Aluminum alloy
12 Pulley shaft
13 End pulley Aluminum alloy Anodized14 Motor pulley Aluminum alloy Anodized
No. Description Material Note15 Parallel flange Aluminum alloy Painting16 Housing Aluminum alloy Painting17 Motor mount Aluminum alloy Painting18 Motor cover Aluminum alloy Anodized19 Motor end cover Aluminum alloy Anodized
20 Band pusher
21 Motor
22 Rubber bushing NBR
23 Dust seal band Stainless steel
24 Bearing
25 Bearing
26 Bearing
27 Tension bolt Chromium molybdenum steel Nickel plated
LEFB 40 □S □Size253240
Motor optionNIL Without lock
B With lock
Equivalent lead
Controller type
300
Stroke
Cable length
Motor type
Electric Actuator Slider Type
- □I/O connector
S 54mm
LEFB series (belt drive)
Type Output Size CompatibleController
S2AC servo motor(Incremental)
100W 25
A1, A2S3 200W 32
S4 400W 40
S6AC servo motor
(Absolute)
100W 25B1, B2C1, C2S1, S2
S7 200W 32
S8 400W 40
S4
300 300mm
3000 3000mm* Refer to "Applicable stroke" table.
● Standard / O Produced to order
300
400
500
600
700
800
900
1000
1100
1200
1300
1400
1500
1600
1700
1800
1900
2000
2500 3000
LEFB25 ● ● ● ● ● ● ● ● O ● O O ● O O O O ● - -
LEFB32 ● ● ● ● ● ● ● ● O ● O O ● O O O O ● ● -
LEFB40 ● ● ● ● ● ● ● ● O ● O O ● O O O O ● ● ●
Applicable Stroke Table
~ ~
Cable type
□□-□
Motor mounting position
NIL Top mounting
U Bottom mounting
NIL Without connector
H With connector
NIL Without cable
S Standard cable
R Robot cable(High flexibility) NIL Without cable
2 2m
5 5m
A 10m
Compatiblecontroller
Power supply voltage [V]
NIL Without controller
A1 LECSA1 100~120
A2 LECSA2 200~230
B1 LECSB1 100~120
B2 LECSB2 200~230
C1 LECSC1 100~120
C2 LECSC2 200~230
S1 LECSS1 100~120
S2 LECSS2 200~230
* Common to the motor cable, encoder cable and lock cable.
* The motor and encoder cables are included.(The lock cable is included when the motor with lock option is selected)
7. How to Order
8. Dimensions
W (mm) H (mm) L (mm)LEFB25S 58 48 252.0 + StrokeLEFB32S 70 60 290.0 + StrokeLEFB40S 90 68 341.5 + Stroke
H
W
L
9. Handling precautions
Cannot be mounted vertically.
Mount on the surface with a flatness of 0.1mm or less. Otherwise, operation failures and inappropriate attachment of the seal band can occur.
Do not apply a load or speed over the specifications.
10. Summary
This product has been added to expand motor variations of the electric actuator slide type.
This is a slider type electric product with benefits from experiences as a pneumatics manufacturer.
(Same as the existing series) (1) Mounting method (can be mounted on the top
without removal of the cover) (2) Transfer speed up to 2,000 mm / s (3) Stroke up to 3,000 mm