Upload
vocong
View
213
Download
0
Embed Size (px)
Citation preview
HYROBOTICS CORP.
5319 Brown Ave. Saint Louis, MO 63120
www.hyrobotics.com
Steel Base Framefor Robust Operation
Pneumatic DistributionManifold ( Easy to Set Up. )
Sensor Confirmation CircuitConnector ( Easy to Set up )
High Strength Aluminum Extrusion Kick Frame WithPrecision Linear Motion Guide
Valve Box for Easy Access.
High Strength FlexibleCable Carrier for longer
wire protection from repeti-tive operation in harsh
condition
Digital AC servo Motorfor all Axis
Digital AC Servo Motorwith Timing Belt Mechanism
No more Backlash!
All information is subject to change without notice., Picture shows NEXIA-400D Model
SR-III Side Take Out Robot FOR 150 ~ 850 TONS IMM 3 Axis AC Servo Motor Low Ceiling Application Back or Front Door Installation.
ISO 9001
CE Certified
Precision Linear Motion Guide ensure low noise with smoothoperation. No Maintenance required.
LOW CEILING, ROBUST, SPEED & RELIABILITY !LOW CEILING, ROBUST, SPEED & RELIABILITY !HYRoboticsHYRobotics SRSR--IIIIII Series Side Take Out Robots, 3 Axis AC Digital Servo.Series Side Take Out Robots, 3 Axis AC Digital Servo.
# Control Features ( HYNC-700 )
Manual , Auto, Step, 1 Cycle operation.
Basic 4 Position for safety, Waiting, Takeout, IMM Start, Release Position.
Each step has Timer Control for Optimumoperation
Mold Maintenance up to 99 Mold.
Can add up to 80 steps in addition of basicsteps including position, motion ( Vacuum,Chucking ), input delay, output signal tosecondary automation
For SPI Interface ( Standard )
Optimized 5.7” touch Screen show currentoperation, manual, step, full auto screen.
Body Attached Control and IMM interfacebox minimize fool print
Rugged and protected plastics case.
Insert Molding, Inspection, Stacking isready to use.
# Standard Features
4 Axis Side Robot ! ( In/Out , Kick, Descent, Chuck Rotation ),
3 Axis Servo Operation ( Panasonic Motor : Over 5 million installed )
1 Axis Pneumatic Operation ( Festo : German Engineered Cylinder )
User friendly , Standard and Famous HYNC-700 Control
Up to 80 Steps can be created for 1 mold, 99 Mold Maintenance
Standard SPI, Euromap 12 IMM Interface ( Ready to Run )
Fast, reliable and easy of maintenance with flexible programming.
2 Vacuum circuits with 2 Chuck Units with Verification sensor ( 4
Point Suction EOAT is included ) and one HY sprue Gripper is in-
cluded
4 User input and 4 Output for communication with other Aux.
90 Deg Chuck Rotation release ensures part protection.
Body Attached Control Boxfor Less foot print
Digital AC Servo Wrist for Aand C Axis : Option
Standard : 90 Deg, ChuckRotation for protecting
SR-III-350
End of Arm tooling Mounting AreaTelescopic In/Out Arm
Festo Up/own MotorSupport Cylinder
For extend motor lifecycle time.