14
691 16 Clothing 30" Split Leather Welders’ Jacket Rolled collar with inside chest pocket. Non-reflective snap closure and snaps on wrist. Full length sleeves. Part No. 910-1: S, M, L, XL, XXL, XXXL, XXXXL Part No. BT910-1: S, M, L, XL, XXL, XXXL, XXXXL (Buck tan) Leather Aprons Waist and leg straps Universal sizing, one piece construction All aprons come with adjustable waist ties and adjustable neck ties Part No. 910-21: 24" x 24" waist apron Part No. 910-22: 24" x 36" bib apron Part No. 910-23: 24" x 48" bib apron Part No. 910-24: 24" x 48" split bib apron Leather Clothing Leather Cape Sleeves Cape sleeve with collar, 9" front, 6" back Part No. 910-6: S, M, L, XL, XXL, XXXL, XXXXL Bibs Part No. 910-7: 14" Detachable bib Part No. 910-7-20: 20" Bib for more protection Leather Sleeves 23" Sleeve with adjustable neck strap and wrist snaps. Part No. BT910-12: Buck tan Part No. 910-12L Part No. 910-12R Part No. 910-12 Part No. 910-1 Part No. 910-22 Leather Clothing Made from No. 1 side split cowhide to add strength and heat resistance. Full sized for the utmost comfort. All seams are sewn with Kevlar ® thread for longer garment life. Available in golden willow (yellow) or buck tan (brown) Soft roll collar - for added neck comfort Non-reflective snap buttons Inside chest pocket and no bind arm pit Adjustable wrist snaps Kevlar ® thread Full cut Larger sizes available upon request Glossary Chrome Tanned- Refers to leather which has been preserved using chromium salts. This tanning produces a soft, heat resistant leather. Oak Tanned- A type of dry vegetable tanning that is non heat resistant. This tanning process gives a very dense leather. Side Split- The portion of the hide that covers the rib area of the animal. Stronger and more uniform than shoulder leather with fewer imperfections such as scars and weak fibers. Shoulder Split- The portion of the hide from the neck and shoulder of the animal. Fibers tend to be weaker than side split. Grain Leather- Top portion of the hide; smooth, soft and flexible. Used primarily when dexterity is required. Leather Terminology Cape Skin- A soft pliable leather which affords the wearer greater dexterity in TIG gloves. Deer Skin- Soft pliable leather even when exposed to high heat: Used primarily for TIG gloves. Pigskin- A very abrasive leather that remains soft when exposed to water. Welting- A 1/4" reinforcing strip of leather sewn between seams to strengthen construction, hide threads and minimize burnout. Kevlar ® - A synthetic fiber developed by Dupont Kevlar ® will withstand 600°F. It is used as a thread in place of cotton for sewing welding gloves or as a woven material to replace asbestos in gloves or clothing. Part No. 910-6 Part No. 910-7 Part No. 910-12 Comfort Vendor Code: COM www.middlesexgases.com

Leather Clothing 30 Split Leather Welders’ Jacket Leather Clothing · 2018. 6. 14. · 691 16 Clothing 30" Split Leather Welders’ Jacket Rolled collar with inside chest pocket

  • Upload
    others

  • View
    5

  • Download
    0

Embed Size (px)

Citation preview

Page 1: Leather Clothing 30 Split Leather Welders’ Jacket Leather Clothing · 2018. 6. 14. · 691 16 Clothing 30" Split Leather Welders’ Jacket Rolled collar with inside chest pocket

691

16

Clothing

30" Split Leather Welders’ JacketRolled collar with inside chest pocket. Non-reflective snap closure and snaps on wrist. Full length sleeves.Part No. 910-1: S, M, L, XL, XXL, XXXL, XXXXLPart No. BT910-1: S, M, L, XL, XXL, XXXL, XXXXL

(Buck tan)

Leather Aprons• Waist and leg straps• Universal sizing, one piece construction• All aprons come with adjustable waist ties

and adjustable neck tiesPart No. 910-21: 24" x 24" waist apron Part No. 910-22: 24" x 36" bib apron Part No. 910-23: 24" x 48" bib apron Part No. 910-24: 24" x 48" split bib apron

Leather Clothing

Leather Cape SleevesCape sleeve with collar, 9" front, 6" backPart No. 910-6: S, M, L, XL, XXL, XXXL, XXXXL

BibsPart No. 910-7: 14" Detachable bibPart No. 910-7-20: 20" Bib for more protection

Leather Sleeves• 23" Sleeve with adjustable neck strap and

wrist snaps. Part No. BT910-12: Buck tanPart No. 910-12LPart No. 910-12RPart No. 910-12

Part No. 910-1

Part No. 910-22

Leather ClothingMade from No. 1 side split cowhide to add strength and heat resistance. Full sized for the utmost comfort. All seams are sewn with Kevlar® thread for longer garment life.

• Available in golden willow (yellow) or buck tan (brown)

• Soft roll collar - for added neck comfort • Non-reflective snap buttons • Inside chest pocket and no bind arm pit • Adjustable wrist snaps • Kevlar® thread • Full cut • Larger sizes available upon request

GlossaryChrome Tanned- Refers to leather which has been preserved using chromium salts. This tanning produces a soft, heat resistant leather.

Oak Tanned- A type of dry vegetable tanning that is non heat resistant. This tanning process gives a very dense leather.

Side Split- The portion of the hide that covers the rib area of the animal. Stronger and more uniform than shoulder leather with fewer imperfections such as scars and weak fibers.

Shoulder Split- The portion of the hide from the neck and shoulder of the animal. Fibers tend to be weaker than side split.

Grain Leather- Top portion of the hide; smooth, soft and flexible. Used primarily when dexterity is required.

Leather TerminologyCape Skin- A soft pliable leather which affords the wearer greater dexterity in TIG gloves.

Deer Skin- Soft pliable leather even when exposed to high heat: Used primarily for TIG gloves.

Pigskin- A very abrasive leather that remains soft when exposed to water.

Welting- A 1/4" reinforcing strip of leather sewn between seams to strengthen construction, hide threads and minimize burnout.

Kevlar®- A synthetic fiber developed by Dupont™ Kevlar® will withstand 600°F. It is used as a thread in place of cotton for sewing welding gloves or as a woven material to replace asbestos in gloves or clothing.

Part No. 910-6 Part No. 910-7

Part No. 910-12

ComfortVendor Code: COM

www.middlesexgases.com

Page 2: Leather Clothing 30 Split Leather Welders’ Jacket Leather Clothing · 2018. 6. 14. · 691 16 Clothing 30" Split Leather Welders’ Jacket Rolled collar with inside chest pocket

692

16

Clot

hing

Detachable BibsLeather Bib• Detachable long front body protection• Adjustable waist strap with quick release buckle• Not interchangeable with 910 bibs• Sewn with Kevlar®

710-7-14: 14" Bib710-7-20: 20" Bib710-7-26: 26" Bib

Jackets30" Leather Welders Jacket• Non-reflective, reinforced snap buttons• Adjustable stand-up, soft rolled collar for added comfort• Scribe pockets on both sleeves• Take-up straps for the waist• Adjustable wrist snaps• Inside pocket to protect belongings• All seams double lock stitched• Double snaps at neck• Stress points are rivet reinforced• Sewn with Kevlar®

Part No. 710-1: S, M, L, XL, XXL, XXXL, XXXXL

Cowhide Comfort® ClothingOffers maximum protection under the most rugged conditions. The Comfort® line of welding clothing is made with high quality leather to ensure maximum protection and comfort. Unlike high temperature synthetic fabrics, cowhide leather is strong, yet flexible and resists cuts, sparks and slag at an economical price.

Cape SleevesLeather Cape Sleeves• Non-reflective, reinforced snap buttons• Adjustable stand-up, soft rolled collar

for added comfort• Scribe pockets on both sleeves• Adjustable wrist snaps• All seams double lock stitched• Stress points are rivet reinforced• Sewn with Kevlar®

Part No. 710-6: S, M, L, XL, XXL, XXXL, XXXXL, 5XL

Leather Sleeves23" Leather Sleeve• Sleeve covers arm from shoulder to wrist• Non-reflective, reinforced snap buttons• Adjustable wrist snaps• Adjustable neck straps• Sewn with Kevlar®

Part No. 710-12

18" Leather Sleeve• Non-reflective, reinforced snap buttons• Adjustable wrist snaps• Adjustable arm straps• Sewn with Kevlar®

Part No. 710-14

ApronsBib Apron• Long front body protection• Adjustable waist strap with quick release buckle• Adjustable crossed back straps• 2 front bib pockets• Stress points are rivet reinforced• Sewn with Kevlar®

Part No. 710-22: 24" x 36"Part No. 710-23: 24" x 48"

Split Leg Bib Apron• 24" x 48" Split leg apron• Adjustable waist and leg straps with quick release buckles• Adjustable crossed back straps• Long front body protection• 2 front bib pockets• Stress points are rivet reinforced• Sewn with Kevlar®

Part No. 710-24

Waist Apron• 24" x 24" • Adjustable waist strap• Quick side release buckle• Sewn with Kevlar®

Part No. 710-21 Part No. 710-24

Part No. 710-12

Part No. 710-14

Part No. 710-23

Leather Clothing

Rod Bags• Double leather bottom• Belt loop• Holds 5 Ibs. of electrodesPart No. WC-38

• Oak tanned sole leather• Hard wood bottom• Belt loop• Holds 10 Ibs. of electrodes plus chipping hammerPart No. WC-40

• Soft golden willow tanned leather• Double bottom• Holds 5 Ibs. of electrodes• Belt loop and quick swivel spring clipPart No. WC-41

Part No. WC-41

ComfortVendor Code: COM

www.middlesexgases.com

Page 3: Leather Clothing 30 Split Leather Welders’ Jacket Leather Clothing · 2018. 6. 14. · 691 16 Clothing 30" Split Leather Welders’ Jacket Rolled collar with inside chest pocket

693

16

Clothing

ComfortVendor Code: COM

Cotton Sateen Full Jackets• Rolled collar with inside chest pocket • Non-reflective snap closure and snaps on wristsPart No. 940-1: (30") S, M, L, XL, XXL, XXXL, XXXXL, 5XLPart No. 940-2: (26") S, M, L, XL, XXL, XXXL, XXXXL, 5XL

Cape Sleeves• Cape sleeve with collar, 9" front, 6" backPart No. 940-6: S, M, L, XL

SleevesPart No. 940-18: 18" Sleeve with elastic top and snaps at wrist Part No. 940-19: 18" Sleeve with elastic at both endsPart No. 940-23: 23" Sleeve with adjustable neck strap and wrist straps.

BibsPart No. 940-7: Detachable 14" bib Part No. 940-8: Detachable 20" bib

Protective Clothing- Flame ResistantLab Coats• 45" overall length.• One piece back with inset sleeves.• Metal snap front closure.Part No. 940-545: M, L, XL, XXL, XXXL

Coveralls• One piece back, two breast, two front,

and two hip pockets.• Snap front closure.Part No. 940-641: S, M, L, XL, XXL, XXXL, XXXXL

Flame Resistant Clothing

Cotton Sateen Aprons• Split bib apron with adjustable neck, waist, and leg straps• Reinforced with leather at all stress points• Surged and stitched seams to prevent raveling• All aprons come with adjustable waist ties and all bib

aprons come with adjustable neck tiesPart No. 940-21: 24" x 24" waist apronPart No. 940-22: 24" x 36" bib apronPart No. 940-24: 24" x 48" split bib apronPart No. 940-25: 24" x 42" split bib apronPart No. 940-26: 24" x 36" split bib apron

Clothing Size ChartS 36" - 38"M 40" - 42"L 44" - 46"XL 48" - 50"XXL 52" - 54"

Part No. 940-1 Part No. 940-6 cape sleevePart No. 940-8 bib

Flame Resistant ClothingComfort® Flame Resistant (FR) clothing is made from 9 oz., 100% visual green cotton. It is cooler, lighter and less expensive than leather. FR Clothing is excellent for warm weather or indoor use where there is light exposure to sparks and spatter. This fabric will maintain its flame resistance through many launderings. Larger sizes available upon request.

Part No. 940-22 Part No. 940-26

Part No. 940-545 Part No. 940-641

Trousers• Two back patch pockets and

two slash front pockets.• Brass zipper fly.• Specify waist and inseam.Part No. 940-610

Cape Sleeve

Bib

www.middlesexgases.com

Page 4: Leather Clothing 30 Split Leather Welders’ Jacket Leather Clothing · 2018. 6. 14. · 691 16 Clothing 30" Split Leather Welders’ Jacket Rolled collar with inside chest pocket

694

16

Clot

hing

• Soft grain leather sweatband.• Snaps over headgear.Part No. 912-81

Winter Liners / Sweatbands

• Heavy blue twill with long nape, front neck fl ap and nose fl ap.

• Velcro neck and nose strap.

• One universal size.• Flame retardant.Part No. 930-60

• Blue stretch quilted material with a fl eece lining.

• Velcro chin strap.• Three suspension tabs.• One universal size.• Flame retardant.Part No. 930-15

• Blue twill shell, with fl eece lining and long nape.

• Velcro chin strap.• Three suspension tabs.• One universal size.• Flame retardant.• 930-18 has pile lining.Part No. 930-16 Part No. 930-18- pile lining

• 100% 16 ounce denim.• 12 ounce poly pile liner.• Neck and shoulder

protection.• Velcro closure.• One universal size.• Flame retardant.Part No. 930-40

• 16 ounce polar fl eece.• Velcro closure, elastic

around face.• One universal size.• Non fl ame retardant.Part No. 930-30

• Winter liner for safety caps and hats.

• One universal size.• Non fl ame retardant.• Washable nylon.• Available in red, blue, or

orange.Part No. 930-50-BLUPart No. 930-50-ORGPart No. 930-50-RED

• Yellow twill shell with napped fl annel on the inside.

• One universal size.• Velcro chin strap.• Three suspension tabs.• Flame retardant.Part No. 930-1

• Heavy blue twill with long nape, front neck fl ap and nose fl ap.

• Velcro neck and nose strap.

• One universal size.• Flame retardant.Part No. 930-12

Sweatbands

• Sheepskin sweatband.• Two snaps fi t on headgear.Part No. 912-82

• 100% cotton outer shell, polyester fl eece lining.

• Two layer.• Long nape length.• Stars and stripes design.• Non-Flame retardant.Part No. 930-GL4X

Winter Liners

ComfortVendor Code: COM

www.middlesexgases.com

Page 5: Leather Clothing 30 Split Leather Welders’ Jacket Leather Clothing · 2018. 6. 14. · 691 16 Clothing 30" Split Leather Welders’ Jacket Rolled collar with inside chest pocket

695

16

Clothing

ComfortVendor Code: FAL

Part No. Description

3400-S-XXXL Rain suit 25 mm 3pc

2–Ply Laminated PVC Rain Suit (25 mm)• 3 piece suit: jacket, pant, hood• Sold as a complete suit only S-XXXL• Medium weight suit that wears like a

heavier suit.• Material is very fl exible and comfortable

with less snag and wear resistance.• Jacket has detachable hood, raglan shoulders,

mesh cape back, and air vents under arms, storm fl y front, with non-conductive snap at ankles and wrists.

Lightweight 12 mm PVC Apparel• Lightweight two piece rain suit with handy

tote pouch.• Jacket has attached hood, storm fl y front

and take up snaps at wrists.• Pants have elastic waist and snaps at the ankles.

PVC/Polyester (35 mm)• Medium weight, PVC coated on a polyester

broad loom fabric.• PVC/polyester material offers good resistance

against abrasions, tears and snags, as well as oils, acids and a wide variety of industrial compounds.

• The premium quality PVC used allows suits to stay fl exible at cold temperatures.

Part No. Description

3100-S-XXXL Rain jacket 35 mm w/ detachable hood

3200 Universal hood w/ drawstring

3500-S-XXXL Rain coat 35 mm 49" w/ detachable hood

3910-S-XXXL Rain pants w/ bib & snap fl y

Part No. Description

3300-S-XXL Rain suit 12 mm

Double Coated PVC/Nylon • This fl ame resistant suit is made with a nylon

scrim material of 210 denier, laminated both sides with PVC.

• Rip-Stop construction allows for light weight comfort while being highly resistant to snags and tears.

• Material remains fl exible in cold weather, yet is light weight and comfortable for warmer temperatures. Resistant to most oils, acids, and chemicals.

Part No. Description

3102-S-XXXL Rain jacket w/detachable hood

3202 Universal hood w/drawstring

3912-S-XXXL Rain pants w/bib & snap fl y

600C-L-XXXL PVC rain coat 49"

Part No. 3100Part No. 3910

Part No. 3102Part No. 3912

Rainwear

www.middlesexgases.com

Page 6: Leather Clothing 30 Split Leather Welders’ Jacket Leather Clothing · 2018. 6. 14. · 691 16 Clothing 30" Split Leather Welders’ Jacket Rolled collar with inside chest pocket

696

16

Clot

hing

Part No. Description1000E Elastic,

one size fi ts all1000R-612 Single sided 6-1/21000R-634 Single sided 6-3/41000R-658 Single sided 6-5/81000R-678 Single sided 6-7/81000R-7 Single sided 71000R-712 Single sided 7-1/21000R-714 Single sided 7-1/41000R-718 Single sided 7-1/8

1000R-734 Single sided 7-3/41000R-738 Single sided 7-3/81000R-758 Single sided 7-5/81000R-778 Single sided 7-7/81000R-8 Single sided 8

1000E & 1000R Series• Single sided-deep crown• Super soft brim- fi tted sizes• 1000E- one size fi ts all• Welders cap- assorted print designs

2000E, 2000R & 2000SSE Series• Reversible- deep crown• Super soft brim- welders cap• 2000 Series- fi tted sizes• 2000R and 2000E- assorted print

designs on outside and solid on inside• 2000SSE- welders cap - in stars

and stripes• 2000E and 2000SSE

one size fi ts all

Part No. Description2000E Reversible elastic 2000R-612 Reversible 6-1/22000R-634 Reversible 6-3/4

2000R-658 Reversible 6-5/82000R-678 Reversible 6-7/82000R-7 Reversible 72000R-712 Reversible 7-1/22000R-714 Reversible 7-1/42000R-718 Reversible 7-1/82000R-734 Reversible 7-3/42000R-738 Reversible 7-3/82000R-758 Reversible 7-5/82000R-778 Reversible 7-7/82000R-8 Reversible 82000SSE Reversible, one size

fi ts all

ComeauxVendor Code: CMX

Part No. Description3000BQE Black quilted elastic

3000BQ-612 Black quilted 6-1/2

3000BQ-634 Black quilted 6-3/43000BQ-658 Black quilted 6-5/83000BQ-678 Black quilted 6-7/83000BQ-7 Black quilted 7

3000BQ-712 Black quilted 7-1/23000BQ-714 Black quilted 7-1/43000BQ-718 Black quilted 7-1/83000BQ-734 Black quilted 7-3/43000BQ-738 Black quilted 7-3/83000BQ-758 Black quilted 7-5/83000BQ-778 Black quilted 7-7/83000BQ-8 Black quilted 8

3000BQ & 3000BQE Series• Black quilted- fl at crown• Firm brim• 3000BQ- fi tted welders cap• 3000BQE- one size fi ts all

welders cap

6000SSB Series• Striped- single sided• Short crown stiff brim• Fitted welders cap • Assorted stripes

Part No. Description6000SSB-612 Stripe 6-1/2

6000SSB-634 Stripe 6-3/46000SSB-658 Stripe 6-5/86000SSB-678 Stripe 6-7/86000SSB-7 Stripe 76000SSB-712 Stripe 7-1/26000SSB-714 Stripe 7-1/46000SSB-718 Stripe 7-1/86000SSB-734 Stripe 7-3/46000SSB-738 Stripe 7-3/86000SSB-758 Stripe 7-5/86000SSB-778 Stripe 7-7/86000SSB-8 Stripe 8

Welder’s Caps

7000 Series • Doo Rag Bandanas

in assorted prints and solids

• One size fi ts all

Part No. Description7000 Assorted7000C Camo7000R Red7000B Royal7000SS Stars & Stripes

Part No. Description5000PD-612 Polka dot 6-1/25000PD-634 Polka dot 6-3/45000PD-658 Polka dot 6-5/85000PD-678 Polka dot 6-7/85000PD-7 Polka dot 75000PD-712 Polka dot 7-1/25000PD-714 Polka dot 7-1/45000PD-718 Polka dot 7-1/85000PD-734 Polka dot 7-3/45000PD-738 Polka dot 7-3/85000PD-758 Polka dot 7-5/85000PD-778 Polka dot 7-7/85000PD-8 Polka dot 8

5000PD Series• Polka-dot- single sided• Short crown- stiff brim• Fitted welders cap in assorted

colors

Part No. Description4000CC-612 Crazy cap 6-1/24000CC-634 Crazy cap 6-3/44000CC-658 Crazy cap 6-5/84000CC-678 Crazy cap 6-7/84000CC-7 Crazy cap 74000CC-712 Crazy cap 7-1/24000CC-714 Crazy cap 7-1/44000CC-718 Crazy cap 7-1/84000CC-734 Crazy cap 7-3/44000CC-738 Crazy cap 7-3/84000CC-758 Crazy cap 7-5/84000CC-778 Crazy cap 7-7/84000CC-8 Crazy cap 8

4000CC Series• Crazy cap- single sided, short

crown, stiff brim• Fitted sizes• Assorted print designs

Part No. Description8000-S Small skull caps8000-M Medium skull caps8000-L Large skull caps

8000 Series• Small medium and large sizes

available• Also available

for private label

www.middlesexgases.com

Page 7: Leather Clothing 30 Split Leather Welders’ Jacket Leather Clothing · 2018. 6. 14. · 691 16 Clothing 30" Split Leather Welders’ Jacket Rolled collar with inside chest pocket

697

16

Clothing

Don’t forget your Comfort winter work

gloves!

Huntsman,Jackson, OccunomixVendor Code: HUN, JAC, OCC

DryBrow® SweatbandsTo Use: Dip in cool water, remove excess water and place on forehead.

H22008• Deluxe, full size (8-5/8" long)• Packaged 25/bag• Individually sleeved for increased shelf lifePart No. 45035

H22010• Deluxe clip-on, full-size (8-5/8" long)• Fits hard hats, welding helmets and sand blast hoods• Packaged 25/bagPart No. 45036

Washable Cloth Sweatband• Absorbs perspiration• Comfortable, durable & washable.• Comes in a pack of two.Part No. 3011537

H22013• Economically priced• Full size (8-5/8" long)• Packaged 100/bagPart No. 45037

ANSI 2-Tone VestClass 2• Soft, lightweight,

machine washable, fl uorescent, polyester fabric

• Fluorescent trim with wide super bright silver retrofl ective tape

• Adjustable panel-belt system for tailored fi t over bulky clothes

• 2 inside and 1 outside pockets with shoulder mic/antenna tab

Part No. 3012870- M-XLPart No. 3012972- 2X-5X

Part No. LB600

Part No. SF560Part No. SS550 Part No. SS551 Part No. SX700

Part No. RG200 Part No. LZ620 Part No. SB505

Part No.MP400

Part No. Shell Lining Layers Neck Length Flame Resistant Parts

Heat Pockets Additional Info.

RG200 Gold 100% cotton fl annel Gold 100% cotton fl annel 1 Regular None Yes Flame retardant until washed

LB600 Navy 100% cotton twill Red heavyweight fl eece 2 Extra long Fleece, fasteners Yes None

LZ620 Navy cotton w/ fl eece lining Black zippered 100% polyester N/A Fleece, polyester Yes Button closure, no metal parts

SB505 Navy 100% cotton twill Red heavyweight fl eece 2 Shoulder Fleece, fasteners Yes None

SS550 Navy 100% cotton twill White sherpa 2 Shoulder Fasteners YesOuter shell and binding fl ame retardant until washed

SS551 Navy 100% cotton twill White sherpa 2 Shoulder Fasteners Yes Removable mouthpiece

SF560 Charcoal heavyweight fl eece Charcoal heavyweight fl eece 2 Shoulder Fleece, fasteners YesBinding fl ame retardant until washed

SX700 Navy 100% Nomex® Charcoal proban cottonbacking, mod acrylic padding

3 Shoulder Binding, velcro Yes None

MP400 Navy cotton and binding Red cotton and binding 2 N/ACotton and bindingfl ame restardant until washed

No Mouth piece

Winter Liners

Sweatbands / ANSI Vest / Work Apron

www.middlesexgases.com

Page 8: Leather Clothing 30 Split Leather Welders’ Jacket Leather Clothing · 2018. 6. 14. · 691 16 Clothing 30" Split Leather Welders’ Jacket Rolled collar with inside chest pocket

698

16

Clot

hing

OccunomixVendor Code: OCC

NavyPart No.1070-01

Camoufl agePart No.1070-CAMO

Sport Style Fleece Liners• Plush, super heavyweight, anti-piling polyester fl eece.• Flame resistant.• Heat pack pockets and refl ective strip.

Black/SilverPart No. LF655

Navy/OrangePart No. LF653

Camoufl agePart No. LF659

Designer Liners/Non-FR• No warming pockets,

elastic on forehead.• No Tyvek ear barriers

or refl ective strips.• 100% cotton outer shell.• Two layers.• Non fl ame resistant.

Part No. ZZS-FLAPart No. ZZL-FLA Part No. ZZS-WAV

Full Face Liners• 100% super heavyweight polyester fl eece.• Flame resistant fl eece, binding and fasteners.• Mesh mouth/nose opening.• Single layer.• Extra long length.

NavyPart No. LF648

Camoufl agePart No. LF649

3-in-1 Plush Fleece Liners• Adjustable design with draw string for tightening.• Heavyweight polyester fl eece.• Also available in High-viz orange.Part No. 1070-HVO (orange)

Winter Liners

Full face coveragePart No. LK810FR-01

Part No. RK800FR-01

Knitted Tube Liners• 100% navy polyester.• Fits snugly over hard hat.• Flame resistant.

Part No. Description Lining Length

ZZL-FLA Flame Polyester fl eece Long nape

ZZS-WAV Flag Heavy sherpa Shoulder

ZZS-FLA Flame Heavy sherpa Shoulder

American Flag on Navy

Part No.1074-01

Black/OrangeFlames

Part No.1077-FLA

Full Face Knitted CapNavy

Part No.1078-01

Noggin Toppers™ Knitted Caps• Cotton outer fabric with plush polyester fl eece lining.

Part No. Description

LUX-KCR-HVL Hi-Viz lime

LUX-KCR-HVO Hi-Viz orange

Acrylic Knit Caps• One size fi ts all.• High visibility 3M™ refl ective thread.

Part No.LUX-KCR-HVO

www.middlesexgases.com

Page 9: Leather Clothing 30 Split Leather Welders’ Jacket Leather Clothing · 2018. 6. 14. · 691 16 Clothing 30" Split Leather Welders’ Jacket Rolled collar with inside chest pocket

699

16

Clothing

OccunomixVendor Code: OCC

Heat Relief / Cooling Vests / Sweatbands

Part No. DescriptionOriginal soft sweatbands

SBR25 25/pk

SBR100 100/pkDeluxe sweatbands

SBD25 25/pk

SBD100 100/pk

SBC25 - clip on 25/pk

Part No. SBD25

Part No. SBR25

Disposable SweatbandsOriginal Soft (SBR)• Just dip in cold water, squeeze out and wear.• Economical and provides cool relief under hard hats,

welding helmets, and sandblast hoods.• Absorbs perspiration while cooling.

Cooling Vests• 61% more cooling coverage.• Weighs 5.5 lbs.• Proban FR7A-Blue.• Comes with PCP2 cooling packs.• PC2B is the same as PC2A plus

more than 68" Refl exite®.

back backCooling pack pair

Part No. PCP2Part No. PC2B (front)Part No. PC2A (front)

MiraCool® Heat Relief GearMiraCool® Cooling Crystals encased within 100% cotton fabric absorb & hold cool water. When worn, cooling sensations are passed to pulse points and carried throughout the body.

Part No. Description UM

940-01 Navy Ea.

940-06 Black Ea.

940-BAS Baseball Ea.

940-BDN Blue denim Ea.

940-CBL Cowboy blue Ea.

940-CHI Chili pepper Ea.

940-CRD Cowboy red Ea.

940-FLA Flame Ea.

940-WAV Wavy fl ag Ea.

940-12 Assorted 12 pack 12 pack

940-24 Assorted 24 pack 24 pack

940B-01 Navy 24 pack 24 pack

940B-BDN Denim bulk 24 pack 24 pack

940B-CBL Cowboy blue-bulk 24 pack

940B-CRD Cowboy red-bulk 24 pack

Part No. Description

952-ZIG Ziggy

Tie Hat

Headbands

Part No. 956-06 Part No. 962-L

Aztec CowboyRed

CowboyBlue

NavyBlack Baseball ChiliPepper

Flame WavyFlag

Motorbike Ziggy

Part No. Description

0954 Assorted

954-018 Navy

Bandanas

Ranger HatTriangular Hat

Deluxe (SBD)• Same as original soft model but is thicker and more

absorbent.

www.middlesexgases.com

Page 10: Leather Clothing 30 Split Leather Welders’ Jacket Leather Clothing · 2018. 6. 14. · 691 16 Clothing 30" Split Leather Welders’ Jacket Rolled collar with inside chest pocket

700

16

Clot

hing

OccunomixVendor Code: OCC

Part No. Description

TN5-01 Navy

TN5-06 Black

TN5-BDN Blue denim

TN5-CBL Cowboy blue

TN5-CHI Chili pepper

TN5-CRD Cowboy red

TN5-FLA Flames

TN5-JFL Jungle fl age

TN5-MOT Motorbike

TN5-SPI Spider web

TN5-WAV Wavy fl ag

TN5 SeriesRegular Tie Hat (Doo-Rag)• Rear ties for securing.• 100% absorbent cotton fabric.• Double cotton layer on forehead.• One size fi ts all.

TN6 SeriesDeluxe Tie Hat withElastic Rear Band• Rear ties for securing.• 100% absorbent cotton fabric.• Cotton elastic back-of-head

band for a snug fi t.• 360° absorbent cotton terry

sweatband (additional foambacking in front).

• One size fi ts all.

Part No. Description

TN6-01 Navy

TN6-06 Black

TN6-BDN Blue denim

TN6-CBL Cowboy blue

TN6-CHI Chili pepper

TN6-CRD Cowboy red

TN6-FLA Flames

TN6-JFL Jungle fl age

TN6-MOT Motorbike

TN6-SPI Spider

TN6-WAV Wavy fl ag

0TN1Cotton Beanie• Three panel navy 100% cotton beanie.• Elastic in forehead.• Plush front-to-back center panel.• One size fi ts all.Part No. 0TN1

Welder’s Caps / Doo Rag Bandanas

Part No. Description

TN8-CRD-E Cowboy red

TN8-FLA-E Flames

TN8-ZIG-E Ziggy

TN8 SeriesTraditional Welder’s Cap• 100% 9oz. cotton canvas.• Balloon Top.• Rugged double stitching.• Bendable bill.• Reversable.• One size fi ts all.• Cotton terry/foam backed 360° sweatband.

Motorbike Navy SmallFlames

Black

CowboyRed

ChiliPepper

BlueDenim

BlueSkulls

CowboyBlue

Flame Jungle SpiderWeb

Wavy Flag Ziggy

Tuff Nougies™

• Quality headgear for welders, workers and wanderers.

www.middlesexgases.com

Page 11: Leather Clothing 30 Split Leather Welders’ Jacket Leather Clothing · 2018. 6. 14. · 691 16 Clothing 30" Split Leather Welders’ Jacket Rolled collar with inside chest pocket

701

16

Clothing

OccunomixVendor Code: OCC

C: Class 2 or 3

• For signifi cant exposure to higher vehicle speeds and/or reducedsight-distances.

• Provides added precaution under high task loads where there are many distractions.

• For conditions where the wearer must be conspicuous through the full range of body motions at a minimum of 390m (1280 feet), and must be identifi ed as a person.

Break Away Vest• Includes hook and loop fasteners at the top,

sides and front.• Includes one inside pocket, one outside pocket

with pen compartment and a utility loop.• Refl ective striping compliant with Class 2

confi guration.

Two Tone Vest• Ultimate daytime conspicuity.• 2" 3M™ Scotchlite™ refl ective tape.• Bright, breathable, yellow polyester fabric

trimmed with bright orange fabric.• One large inside pocket and one outside pocket.

Part No. Color Size

LUX-SSBRP-0XL Orange Extra large

LUX-SSBRP-YXL Orange Extra largeLarger hole mesh

LUX-SSBRPC-0XL Orange Extra large

LUX-SSBRPC-YXL Yellow Extra large

LUX-SSBRPC-YXXL Yellow Extra extra large

LUX-SSBRPC-02X Orange 2X extra large

LUX-SSBRPC-03X Orange 3X extra large

ANSI/ISEA 107 Scenarios

A: Class 1 / 2

• Permits full and undivided attention toapproaching traffi c.

• Provides ample separation of the pedestrian worker from confl icting vehicle traffi c.

• Permits optimum conspicuity in backgrounds that are not complex; and where vehicle and moving equipment speeds do not exceed25 mph.

B: Class 2 / 1 or 3

• For greater visibility during inclement weather conditions.• Permits optimum conspicuity in backgrounds that are not

complex.• For use when performing tasks which divert attention

from approaching vehicle traffi c.• For conditions where vehicle or moving

equipment speeds exceed 25 mph or where workactivities take place in closer proximity to vehicle traffi c.

ANSI Safety Vests

ANSI

Class1

ANSI

Class2

ANSI

Class3Typical Under certain

conditions

ANSI

Class2

ANSI

Class1Typical Under certain

conditionsor

ANSI

Class2

ANSI

Class3or Typical under

certain conditions

Class 1• The upper two thirds is made of traditional

mesh poly-net fabric.• The lower third is solid ANSI 107 Class 1.• Refl ective striping is compliant with Class 2

confi guration.

ANSI

Class1

Class 2

ANSI

Class2

Part No. Color Size

LUX-SSFM-O3X Orange 3X

LUX-SSFM-O3XL Orange 3X extra large

LUX-SSFM-OXL Orange Extra large

Part No. Color Size

LUX-SSG2T-L Two tone Large

LUX-SSG2T-XL Two tone Extra large

LUX-SSG2T-3L Two tone 3X extra large

LUX-SSG2T-4L Two tone 4X extra large

LUX-SSG2T-XXL Two tone Extra extra largeANSI

Class2

Note: Additional sizes available.

Note: Additional sizes available.

Note: Additional sizes available.

www.middlesexgases.com

Page 12: Leather Clothing 30 Split Leather Welders’ Jacket Leather Clothing · 2018. 6. 14. · 691 16 Clothing 30" Split Leather Welders’ Jacket Rolled collar with inside chest pocket

702

16

Clot

hing

OccunomixVendor Code: OCC

Surveyor’s Vest• 9 outside pockets and 3 inside pockets.• Fully dielectric, non-conductive zipper.

Standard Vest• Hook and loop closure.• Lightweight material.• 2" 3M™ Scotchlite™ refl ective tape. Two 360°

horizontal stripes. Two shoulder stripes.• Additional sizes available.

Occumesh Vest• Tight wicking mesh.• Hook and loop closure.• 3M™ Scotchlite™ refl ective striping.• Soft as t-shirt fabric.

ANSI Safety Vests

Mesh Vest• Ultimate daytime conspicuity.• 2" 3M™ Scotchlite™ refl ective tape.• Bright, breathable, yellow polyester fabric trimmed

with bright orange fabric.• One large inside pocket and one outside pocket.• Large hole mesh.

Part No. Color Size

LUX-SSCOOLG-OM Orange Medium

LUX-SSCOOLG-OL Orange Large

LUX-SSCOOLG-OXL Orange Extra large

LUX-SSCOOLG-O2X Orange 2X extra large

LUX-SSCOOLG-O3X Orange 3X extra large

LUX-SSCOOLG-O4X Orange 4X extra large

LUX-SSCOOLG-O5X Orange 5X extra large

LUX-SSCOOLG-YL Yellow Large

LUX-SSCOOLG-YXL Yellow Extra large

LUX-SSCOOLG-Y2X Yellow 2X extra large

LUX-SSCOOLG-Y4X Yellow 4X extra large

LUX-SSCOOLG-Y5X Yellow 5X extra large

ANSI

Class2

Part No. Color SizeTwo horizontal refl ective stripes

LUX-SSFULOMYXL Yellow Extra large

LUX-SSFULOMY2X Yellow 2X extra large

LUX-SSFULOMY3X Yellow 3X extra largeOne horizontal refl ective stripe

LUX-SSGOMYXL Yellow Extra large

Part No. Color Size

LUX-SSFULLG-OL Orange Large

LUX-SSFULLG-OXL Orange Extra large

LUX-SSFULLG-Y2X Yellow 2X extra large

LUX-SSFULLG-YL Yellow Large

LUX-SSFULLG-YX Yellow Extra large

Part No. Color Size

LUX-SSFS-YXL Yellow Extra large

Class 2

ANSI

Class2

ANSI

Class2

ANSI

Class2

Note: Additional sizes available.

Note: Additional sizes available.

Note: Additional sizes available.

Note: Additional sizes available.

www.middlesexgases.com

Page 13: Leather Clothing 30 Split Leather Welders’ Jacket Leather Clothing · 2018. 6. 14. · 691 16 Clothing 30" Split Leather Welders’ Jacket Rolled collar with inside chest pocket

703

16

Clothing

OccunomixVendor Code: OCC

Short Sleeve Mesh Vest• Background material: 100% yellow polyester

breathable knit mesh.• Hook and loop closure.• One outside pocket.• Two sleeve stripes.• Refl ective striping compliant with Class 3

confi guration.

Wicking Polyester T-shirt• 100% polyester with Whisk-it™ treatment.• Cooler and more comfortable than cotton.

Part No. Color Size

LUX-SSFULLZ-YXL Yellow Extra large

LUX-SSFULLZ-YM Yellow Medium

LUX-SSFULLZ-YL Yellow Large

LUX-SSFULLZ-Y3X Yellow 3X extra large

Economy Single Band Vest• Hook and loop closure.• Lightweight material.• 2" 3M™ Scotchlite™ refl ective tape. One 360°

horizontal stripes. Two vertical shoulder stripes.

Zippered Vest• Nylon zipper closure.• Lightweight large hole mesh material.• 2" 3M™ Scotchlite™ refl ective striping. One 360°

horizontal stripe. Two vertical shoulder stripes.

Part No. Color Size

LUX-SSG-OL Orange Large

LUX-SSG-YXL Yellow Extra large

LUX-SSG-O2X Orange 2X extra large

LUX-SSG-YM Yellow Medium

LUX-SSG-YL Yellow Large

LUX-SSG-OXL Orange Extra large

LUX-SSG-Y2X Yellow 2X extra large

LUX-SSG-Y3X Yellow 3X extra large

LUX-SSG-Y4X Yellow 4X extra large

Part No. Color Size

LUX-SSGZC-XL Yellow Extra large

Zipper, Multi-Pocketed Vest• Storage for pens, pads & instruments with a

clear I.D. pocket.• 360 3M™ Scotchlite™ refl ective tape.• Utility loops for radio handset.• Durable dielectric 100% non-metallic zipper.

Class 2

Class 3

Class 2 & 3 ANSI Safety Vests

ANSI

Class2

ANSI

Class2

ANSI

Class2

Part No. Color Size

LUX-HSCOOL3-YL Yellow Medium

LUX-HSCOOL3-YXL Yellow Extra large

LUX-HSCOOL3-Y2X Yellow 2X extra largeANSI

Class3

ANSI

Class3

Part No. Color Size

LUX-SSTP3-O2X Yellow 2X extra large

Note: Additional sizes available.

Note: Additional sizes available.

Note: Additional sizes available.

Note: Additional sizes available.

Note: Additional sizes available.

www.middlesexgases.com

Page 14: Leather Clothing 30 Split Leather Welders’ Jacket Leather Clothing · 2018. 6. 14. · 691 16 Clothing 30" Split Leather Welders’ Jacket Rolled collar with inside chest pocket

704

16

Clot

hing

Occunomix, WilsonVendor Code: OCC, WSC

Short Sleeve Vest• Hook and loop closure including a radio pocket.• Lightweight yellow material.• Two sleeve stripes.• Refl ective striping compliant with Class 3

confi guration.

5 in 1 Coat & Body Warmer• Five layers of weather blocking fabrics.• 2" 3M™ Scotchlite™ refl ective tape.• Outer fabric is PVC coated polyester. Extremely

bright, 100% weatherproof material.• Weatherproof zipper and button storm fl ap closure.

NON-ANSI VestsExpandable Chevron Vest• 1-1/2" yellow gloss

refl ective tape.• Hook and loop center closure

and expandable side panels.• Lightweight open hole mesh.• Orange, Regular size Note: Additional sizes available.

Part No. LUX-XCHGLM

Economy Vest• Lightweight mesh fabric.• Single 360° horizontal stripe.• 2 shoulder stripes.• Hook and look closure.

Class ANSI Safety Vests & Coats / Non ANSI Vests / Work Apron

Class 3

Part No. Color Size

LUX-HSCOOL3-YL Yellow Large

LUX-HSCOOL3-YXL Yellow Extra large

Part No. Color Size

LUX-TJFS-OXL Yellow/blue Extra large

Part No. Color Size1" silver glossy tape

LUX-XGTM-OL Orange Large

LUX-XGTM-OXL Orange Extra large

LUX-XGTM-O4X Orange 4X extra large

LUX-XGTM-YL Yellow Large

LUX-XGTM-YXL Yellow Extra large1-3/8" two tone tape

LUX-XTTM-OXL Orange Extra large

LUX-XTTM-O4X Orange 4X Extra large

ANSI

Class3

ANSI

Class3

Note: Additional sizes available.

Note: Additional sizes available.

Note: Additional sizes available.

Part No. LUX-XTTM-OXL

Denim Apron28" x 26" heavy duty denim apron. Features front pocket for convenient storage area. Over-the-head style with waist tie. Part No. A2836-BD1P

www.middlesexgases.com