Upload
hirklins-alpa
View
218
Download
2
Tags:
Embed Size (px)
DESCRIPTION
LANDKAP composite division began as early as 2009. Having our relationship with local and other international manufacturer as strategic alliance partnership. Currently, LANDKAP in the midst of introducing few products to replace from woods, aluminium and steel etc to composites.
Citation preview
High Performance Solutions
PRODUCT OF MALAYSIA
LANDASAN KAPITAL (M) SDN BHD
High Performance Solutions
About The Company
"Generating Transformation
Towards 1Malaysia for Today
and Tomorrow"
High Performance Solutions
LANDASAN KAPITAL (M) SDN BHD was incorporated on 8th January
2001 to undertake building constructions, civil engineering projects and
steel fabrication works, both in public and private sectors. The company is
registered as a Bumiputra class A Contractor with Pusat Khidmat
Kontraktor (PKK) Kementerian Pembangunan Usahawan, to enable the
company to tender and undertake government project of any size.
As an accredited approved Contractor under grade G7 category with the
Construction Industry Development Board, the custodian and guardian of
the construction industry in Malaysia, we have undertaken and
participated in various design and built project with several reputable
developer and contractors.
We have established ourselves as a company adhering strictly to the
policy of timely job completion, quality workmanship and cost effective.
With strong support from our suppliers, experienced management team of
wide knowledge in the construction industry, we are geared to move
forward to be a reputable Bumiputera contractor.
High Performance Solutions
LANDKAP thru our strategic alliance partnership with
local and International manufacturer is capable of
designing, manufacturing and installing of molded
and Pultruded composite Fiberglass Reinforced
Polymer (FRP) products.
These include grating, stair treads, floor plates, cover
trenching, handrails, ladders, cable tray, struts, roof
truss, enclosures and structural shapes. Some of the
standard products are available through a network of
stocking distributors and representatives.
Capabilities
LANDKAP capabilities include design and engineering assistance as well
as custom manufacturing. LANDKAP started in business as a supplier,
providing solution that no one else wanted to do or was incapable of
doing.
LANDKAP composite division began as early as 2009. Having our
relationship with local and other international manufacturer as strategic
alliance partnership. Currently, LANDKAP in the midst of introducing few
products to replace from woods, aluminium and steel etc to composites.
LANDKAP continues to grow and innovate, adding products and
services to serve a diverse customer base.
Design Criteria
All components of LANDKAP structural & panel, which are made of frp
'pultrusion' and 'hand-lay' process, has conformed to the following
physical test and properties (as conducted by international lab)
High Performance Solutions
Products RangeStructural Profile
LANDKAP offers a wide range of pultruded structural components
including channels, beams, angles, bars, rods, concrete
embedment angles, toe plate and flat sheets. LANDKAP structural
shapes are used in a broad array of applications, providing a unique
combination of corrosion resistance, high strength, dimensional
stability and light weight, along with thermal and electric non-
conductivity.
Grating & Manhole Cover
Cable Ladder & Cable Trays
FRP grating and manhole cover have been engineered notonly for high strength, but also to overcome corrosionproblems found in chemical and mining industries wherecorrosive products are used. These are areas where metalgrating rapidly deteriorates or creates a constantmaintenance problem.
LANDKAP's manufacturing, fabrication, engineering and salespersonnel are committed to solving your needs for the highest
quality, most cost effective nonmetallic cable ladders &cable tray in the world.
Enclosures & Shelters
LANDKAP's ability to develop and customize FRP
enclosures and shelters, from small modifications to
completely new enclosures - provides its customers and
partners unique solutions in a timely and economical
fashion.
Doors & Windows
LANDKAP’s FRP flush & louvers doors offer trouble-freeperformance and long-lasting beauty in the mostdemanding interior and exterior entrance applications.remarkably durable, they can withstand heavy traffic,abuse, or adverse environmental conditions and continueto look like new for years.
Fencing, Ladders & Handrails
LANDKAP has the capability to turnkey (design,
manufacture, fabricate and install) a wide range of
handrail, fencing and ladder project, from smallest
platform to massive, complex structures.
High Performance Solutions
Products & Process: Process Description
Pultrusion is a manufacturing process for producing continuous lengths of FRP structural shapes.
Raw materials include a liquid resin mixture (containing resin, fillers and specialized additives)
and reinforcing fibers. The process involves pulling these raw materials (rather than pushing as is
the case in extrusion) through a heated steel forming die using a continuous pulling device. The
reinforcement materials are in continuous forms such as rolls of fiberglass mat or doffs of
fiberglass roving. As the reinforcements are saturated with the resin mixture ("wet-out") in the
resin impregnator and pulled through the die, the gelation (or hardening) of the resin is initiated
by the heat from the die and a rigid, cured profile is formed that corresponds to the shape of
the die.
While pultrusion machine design varies with part geometry, the basic pultrusion process
concept is described in the following schematic.
The creels position the reinforcements for subsequent feeding into the guides. The reinforcement
must be located properly within the composite and controlled by the reinforcement guides.
The resin impregnator saturates (wets out) the reinforcement with a solution containing the resin,
fillers, pigment, and catalyst plus any other additives required. The interior of the resin
impregnator is carefully designed to optimize the "wet-out" (complete saturation) of the
reinforcements.
On exiting the resin impregnator, the reinforcements are organized and positioned for the
eventual placement within the cross section form by the preformer. The preformer is an array of
tooling which squeezes away excess resin as the product is moving forward and gently shapes
the materials prior to entering the die. In the die the thermosetting reaction is heat activated
(energy is primarily supplied electrically) and the composite is cured (hardened).
On exiting the die, the cured profile is pulled to the saw for cutting to length. It is necessary to
cool the hot part before it is gripped by the pull block (made of durable urethane foam) to
prevent cracking and/or deformation by the pull blocks. Two distinct pulling systems are used: a
caterpillar counter-rotating type and a hand-over-hand reciprocating type.
In certain applications an RF (radio frequency wave generator) unit is used to preheat the
composite before entering the die. When in use, the RF heater is positioned between the resin
impregnator and the preformer. RF is generally only used with an all roving part.
High Performance Solutions
Products & Process: Features of Pultruded Products
HIGH STRENGTHStronger than structural steel on a pound-for-pound basis. Has been used toform the superstructures of multistory buildings, walkways, sub-floors andplatforms.
LIGHTWEIGHTPultrusion are 20-25% the weight of steel and 70% the weight of aluminum.Pultruded products are easily transported, handled and lifted into place.Total structures can often be preassembled and shipped to the job siteready for installation.
CORROSION/ROT RESISTANTPultruded products will not rot and are impervious to a broad range ofcorrosive elements. This feature makes pultrusion a natural selection forindoor or outdoor structures in pulp and paper mills, chemical plants, waterand sewage treatment plants, structures near salt water and other corrosive
environments.
NON-CONDUCTIVEGlass reinforced pultrusion have low thermal conductivity and areelectrically non-conductive.
ELECTRO-MAGNETIC TRANSPARENCYPultruded products are transparent to radio waves, microwaves and otherelectromagnetic frequencies.
DIMENSIONAL STABILITY
The coefficient of thermal expansion of pultruded products is slightly lessthan steel and significantly less than aluminum.
PARTS CONSOLIDATIONCustom designed pultrusion allow multiple discrete parts to be designed andfabricated into a single part thus reducing the number of fabricated partsand the need to join these parts together.
LOW TEMPERATURE CAPABILITIESGlass fiber reinforced pultrusion exhibit excellent mechanical properties atvery low temperatures, even -70°F. Tensile strength and impact strengths are
greater at -70°F than at +80°F.
AESTHETICSPultruded profiles are pigmented throughout the thickness of the part andcan be made to virtually any desired custom color. Special surfacing veilsare also available to create special surface appearances such as woodgrain, marble, granite, etc.
High Performance Solutions
Markets and Products
The features of pultruded products translate to benefits in many markets
shown below.
Aerospace/Military
•Antenna
•Ballistic protection panels
•Railing/ladder assemblies for ships
•Stiffeners – custom profiles
Agriculture
•Animal Fencings
•Animal shelters
• Gates
Building / Construction
•Beams
•Billboard sign frames and elevated walkways
•Building Panels
•Caged Ladders
•Catwalks
•Fenestration - window lineal
•Formwork (permanent)
•Handrails
•Platforms
•Roof panels
•Stair steps
•Structural Profiles (angle, channel, I-beam, rod,
plate, tube)
•Threaded rod and nuts
•Walkways
Consumer
•Flag Poles
•Tool handles (Tree trimmers, loppers, shovels, rakes,
post-hole diggers, extenders for light
bulb replacement)
High Performance Solutions
Cooling Towers
•Flooring – custom panel for fan decks
•Structural shapes for frame
Electrical Utility
•Conductor bars & covers
•Cross arms
•Conductor support brackets
•Guy Insulators
•Line Post Insulators
•Utility Poles and Towers
Electrical
•Armature supports
•Cable Tray and Cable Tray Components
•Fuse tubes
Infrastructure
•Pedestrian Bridges
•Highway delineators
•Road sign – custom panel, structural shapers
for frame and posts
•Floating docks – handrails, walkways
Oil & Gas
•Handrails
•Platforms
•Stair steps
•Walkways
Power Generation & Transmission
•Sub-station outdoor structure
•Battery rack
Rail Transportation
•Capacitor Racks
•Overhead Catenaries
•Battery Racks
High Performance Solutions
Telecommunications
•Attachment hardware
•Cell Towers & Poles
•Coaxial cable support
•Equipment Housing (concealment) –
structural profiles and panels
•Support frame and structure
Theme Park
•Handrails
•Platforms
•Walkways
•Bridges
Transportation
•Advertising panels
•Lighting fixtures
•Truck Trailer Flooring/Body
Water/Wastewater
•Cell Dividers
•Floating docks – handrails, walkway
•Gate Guides
•Handrails
•Ladders
•Odor Containment Covers
•Trench & manhole covers
•Walkways
•Weir plates
High Performance Solutions
OUR PRODUCT RANGE
LANDKAP thru it collaboration with Local and International
manufacturer have many years experience in the field of Advance
Material Technology, and are able to offer specialized service on
virtually all shape and profile. Headed by Mr. Bashhir Mohd Yusof
(Project Director) and his teams fully qualified engineers and support
staff are always on hand to take care of problems quickly and cost-
effectively. Regular preventive maintenance is the best and most cost
effective way to go, and takes care of most problems before they even
start. We are able to undertake new development or repair and
rehabilitate / retrofit project.
BeforePropose placement with
FRP structural
High Performance Solutions
YOUR
IDEA
YOUR
DESIGN
YOUR PROJECT
PLANS
& SPECS
DEVELOP VIABLE SOLUTIONS
PROVIDE VALUEENGINEERING
ANALYZE TO PROVIDESCOPE OF WORK
QUOTATION
DETAILING
FABRICATE
COMPLETION
INSTALL
Features
▪ Durable ▪ Impact Resistant ▪ Lightweight ▪ Low Maintenance ▪ Mildew Resistant
▪ Moisture Proof ▪ Never Needs Paint ▪ Termite Resistant ▪ Will Not Rot ▪ Will Not Rust
▪ Will Not Warp
Applicable For
▪ Aeronautical Commercial & Defense ▪ Agricultural ▪ Air Pollution Control ▪ Appliance / Equipment
▪ Building Construction ▪ Telecommunication ▪ Chemical Processing ▪ Consumer / Recreation
▪ Electrical Utility ▪ Food & Beverage ▪ Municipalities ▪ Oil & Gas ▪ Plating ▪ Ports & Marines ▪ Pulp &
Paper ▪ Transportation ▪ Water & Waste Water
High Performance Solutions
No leakage of current No corrosion No maintenance Low cost Long life
Now in line with our innovative past, were pleased to present you FRP BATTERY
STANDS which are made on state-of-the-art plant from special selectedgrade of glass fiber and resin system.
These Battery Stands are available inmany standard and custom sizes tomeet practically all installationrequirements.
APPLICATION:
Power Utilities,Oil & Gas, Railways System, Telecommunication Commercial Area
RANGE & SPECIFICATIONS:
Battery Stand is fabricated usingsections and polymeric hardware.Designs available in single row or
double row and single and also insingle tier or double tier. Dimension andload bearing members selected to suitthe battery. Our FRP Battery Stands areavailable for all types and all makes ofbattery.
UNBEATABLE ADVANTAGES :
Excellent Dielectric Strength, Hence
Eliminating Leakage of Current
No Effect Against Termite & Fungus
Attack
Self Colored
Light Weight, Yet Strong
Easy To Clean & Wash
No Warping
No Maintenance Costs
Resistant to Battery Acids
Power Utilities Oil & Gas Railways System Telecommunication Commercial Area
APPLICATION
F R P B AT T E R Y S TA N D S
High Performance Solutions
Size Available : 1) 10mm x 127mm x 127mm x 4934mm – Sq. Hollow2) 10mm x 102mm x 102mm x 3773mm – Sq. Hollow3) 10mm x 102mm x 102mm x 3456mm – Sq. Hollow4) 10mm x 102mm x 76mm x 4747mm – RHS(or any size required by clients)
Type of Profile : 1) Profile filled with Foamed2) Hollow Profile3)Hollow Profile with End Cap4) I-Beam or H-Beam
Color : Wooden, Grey, Yellow or any color required by clients
REPLACEMENT OF WOODEN
CROSSARM
High Performance Solutions
Since the seventies, the wooden cross arm is widely used on the suspensiontower for 132kV and 275kV overhead transmission line. The usage of woodencross arm is mainly due to its good performance during lightning strike. However
there are other problems associate with wooden cross arm. Among them aresplitting along bolt hole which cause structural failure life span due toenvironment exposure in the new millennium, the revolution of technology hasdeveloped Pultruded Glass Fiber Reinforced Structural cross arm which is able toreplace the wooden cross arm. This includes:
• Main Member• Tie Member
This Pultruded Glass Fiber Reinforced Structural cross arm is widely used in othercountries such as Australia and China because of the following advantageous:
• Lightweight• Strong• Easy to Install• Workability• No water Absorption• Chemical Resistance• Electric Insulation• Heat Insulation• No Corrosion• Dimension Stability• Long Size Possibility
For this purpose, LANDKAP will undertake to conduct to produce locally andprovide a solution by introducing the Pultruded Glass Fiber Reinforced Structuralfor the replacement of wooden cross arm in Malaysia.
INTRODUCTION
High Performance Solutions
Our other applications
Agricultural Industry
Features
▪ Durable ▪ Impact Resistant ▪ Lightweight ▪ Low Maintenance ▪ Mildew Resistant
▪ Moisture Proof ▪ Never Needs Paint ▪ Termite Resistant ▪ Will Not Rot ▪ Will Not Rust
▪ Will Not Warp
High Performance Solutions
Thru our collaboration, LANDKAP are capable designing, manufacturing,
fabricating and assembling FRP base structure and panels for over 10 years.
Now! We embarking our new product range for agriculture base business.
Our goal has always been to provide the highest quality and service to our
customers!
We also keep the price of our products at a reasonable cost, so they are a
great value for the price.
High Performance Solutions
Our standard horse and cattle gates are 4’ tall with 6 rails
Our gates are lightweight, with the highest strength,pound for pound, to easily keep in your animals.
LANDKAP’s fiberglass gates are perfect for use in olderbarns where the posts aren’t evenly spaced, orcentered, as we can custom size the gate to fit yourneeds.
Our standard sheep and goat gate is 4’ tall with a 6 railsystem
Our gates work great with sheep where the object isgenerally to deter, rather than actually stop them.
Our gates are maintenance free and will provide alifetime of trouble free service!
Our gates are custom built to the size and height youdesire- up to 16 feet!
Fiberglass is light and will not strain the posts, or requireadditional support, and is maintenance free!
All of our standard gates are designed with a 6-rail system.
These panels are 4 feet high and can be custom built to anylength up to 16 feet. Gates wider than 16’ or taller than 4’ canbe made if necessary!
Our Fiberglass has a Lifetime Warranty against
breakage by your animals!
Are you looking for a lightweight,
maintenance free gate with
exceptional strength?
YOU HAVE FOUND IT!
For further information kindly contact us
LANDASAN KAPITAL (M) SDN BHD CO. NO.:536101-K
34A, Jalan PSK 8, Pusat Perdagangan Seri Kembangan43300 Seri Kembangan, Selangor Darul EhsanTel : 03 8942 1761, 3982 Fax : 03 8942 2872Email : [email protected]
Webmail : www.landkap.com.my
TECHNICAL DATAProduct : FRP fencing / gates
Process : Pultrusion
Materials : Fiber Reinforce Polymer
User : Agriculture Division
High Performance Solutions
Wooden flooring in poultry barns has been used formany years because a better alternative was notavailable. But wooden flooring has a number ofproblems that makes it poorly suited to the environmentin a poultry barn.
Is the wooden flooring in your barn causing youheadaches? Are you constantly replacing your barn's
flooring because it has a short lifespan? Is cleaningyour poultry flooring a real hassle? Does your poultryflooring harbor bacteria that is harmful to your birds?
If you have to deal with any of the above problemsthen you will be pleased to know that LANDKAP hascome up with an affordable poultry grating that cansolve the problems wooden flooring creates.
The LANDKAP poultry slat is manufactured from pure Fiber Reinforce Polymer so that it:
• Is sturdy and can stand up to the conditions in your poultry barn.• Is resistant to wear, chemicals and changes in temperature.• We've created a poultry slat that will last. The LANDKAP grating comes with a
unique hinged frame system that significantly increases its durability.• Our poultry slat makes it easy for you to install and clean your flooring. With the
interlocking design of our slat you need no tools to install the slats or removethem while cleaning.
• Decrease the bacteria your birds are exposed to. Since our slats are made frompure Fiber Reinforce Polymer and easy to clean they don't allow bacteria tobuild up in them like wooden flooring does.
• The LANDKAP grating offer increased foot support that reduces injuries to yourbirds.
Options:• A cost effective FRP support system is available to raise the flooring.• The standard color for the grating is grey but you can custom order your
grating in any color you need.• In addition to our standard poultry flooring we also have special duck
flooring which is designed to be comfortable for duck feet.
High Performance Solutions
Features• Surface lets manure pass through easily, remaining clean and comfortable for your
birds.• Anti-slip surface.• Manufactured of pure FRP, making the slat extremely resistant to wear, differences
in temperature and chemical agents.• No tools required.• Interlocking 2’ x 3’ grating make installation and removal very easy work.
Technical Characteristics• Material: FRP• Unitary Weight: Approximately 6.615 lbs.• Treading Surface: 60%• Color: Available in Yellow, Blue, Grey or Black
Keep your poultry happy and healthy. Contact LANDKAP today to learn moreabout the slat that makes wooden/steel flooring obsolete.
LANDASAN KAPITAL (M) SDN BHD CO. NO.:536101-K
34A, Jalan PSK 8, Pusat Perdagangan Seri Kembangan43300 Seri Kembangan, Selangor Darul EhsanTel : 03 8942 1761, 3982 Fax : 03 8942 2872Email : [email protected] : www.landkap.com.my
High Performance Solutions
PULTRUDED GLASS FIBER
VS.
STRUCTURAL TIMBER
COMPARE! Pultruded Fiberglass Structural Shapes Structural Timber
CORROSION
RESISTANCE
Superior resistance to a broad range of
chemicals. Unaffected by moisture or
immersion in water if ends are properly
sealed.
Surfacing veil and UV additives create
excellent weather ability.
Can warp, rot and decay from exposure to
moisture, water and chemicals.
Coatings or preservatives required to
increase corrosion or rot resistance can
create hazardous waste and/or high
maintenance.
INSECT
RESISTANCE
Unaffected by insects. Susceptible to insect attack (marine
borers, termites, etc.). Coatings to increase
resistance to insects can be
environmentally hazardous.
STRENGTH Pultruded fiberglass is stronger, and has
higher flexural strength than timber.
Ultimate flexural strength (Fu)
LW = 30,000 psi,
CW = 10,000 psi.
Compression strength is 30,000 psi.
Extreme fiber bending = up to 2800 psi.*
Compression parallel to grain = up to 1800
psi.*
STIFFNESS Pultruded fiberglass is approximately 1-1/2
times as rigid as wood. Modulus of
elasticity LW = 2.5 x 106 psi, CW = .8 x 106
psi.
Modulus of elasticity = up to 1.8 x 106 psi.*
ELECTRICAL CONDUCTIVITY Non-conductive - high dielectric
capability.
Timber can be conductive when it is wet.
WEIGHT Specific gravity = 1.7
Pultruded fiberglass has significantly higher
strength-to-weight ratio.
Specific gravity = .51 (oven dried).*
FINISHING AND COLOR Pigments added to the resin provide color
throughout the part. Special colors
available. Composite design can be
customized for required finishes.
Must be primed and painted for colors. To
maintain color, repainting may be
required.
COST Lower maintenance, longer product life
often equals lower overall costs.
Lower initial cost.
Pultruded glass fiber reinforced structural shapes and plate have a number of significant advantages over timber inmany structural applications. Pultruded fiberglass will not rot or decay and is not susceptible to insect attack. Unlikewood, fiberglass requires no environmentally unfriendly preservatives or repellants, does not absorb any significantamount of water and is consistent in strength and appearance piece-to-piece (no culling). Pultruded fiberglass isstronger, more rigid and lighter weight than structural timber.
Is pultruded fiberglass a better choice for your application? Consider the point-for-point comparison below.
NOTE: Properties shown for pultruded fiberglass structural shapes, are approximate for typical off-the-shelf structuralpultrusion.
High Performance Solutions
PULTRUDED GLASS FIBER
VS.
Steel A-36 Carbon
Unlike Steel which will rust when exposed to weathering and chemicals, fiberglass structural shapes are highly corrosionresistant. Features of both pultrusion and steel structural shapes are compared on a point-for-point basis below.
NOTE: Properties shown for pultruded fiberglass structural shapes are approximate for typical off-the-shelf structuralpultrusion.
COMPARE! Pultruded Fiberglass Structural Shapes Steel A-36 Carbon
CORROSION RESISTANCE
Pultrusion are available in either polyester
or vinyl ester resin for resistance to a
broad range of chemicals.
Painting required only when exposed to
direct sunlight.
Subject to oxidation and corrosion.
Requires painting or galvanizing for
many applications.
WEIGHT Lightweight - weighs 75% less than steel.
1/2" thick plate = 4.7 lbs./sq. ft.
Could require lifting equipment to
move and place.
1/2" thick plate = 20.4 lbs./sq. ft.
CONDUCTIVITY Does not conduct electricity.
Low Thermal Conductivity 4
(BTU/SF/HR/Fo/IN).
Conducts electricity. Grounding
potential.
Thermal Conductivity 260-460
(BTU/SF/HR/Fo/IN).
STRENGTH Pultrusion have a high strength-to-weight
ratio, and pound-for-pound are stronger
than steel in the lengthwise direction.
Ultimate flexural strength (Fu)
LW = 30 ksi
CW = 10 ksi
Homogeneous material.
Yield strength (Fy) 36 ksi
STIFFNESS Modulus of elasticity
LW = 2.5 x 106 psi
CW = .8 x 106 psi
Will not permanently deform under
working load.
Modulus of elasticity
29 x 106 psi
IMPACT RESISTANCE Glass mat in pultruded parts, distributes
impact load to prevent surface damage
even in sub-zero temperatures. Will not
permanently deform under impact.
Can permanently deform under
impact.
EMI/RFI TRANSPARENCY Transparent to EMI/RFI transmissions. Can interfere with EMI/RFI transmissions.
VERSATILITY Pigments added to the resin provide
color throughout the part. Special colors
available.
Must be painted for color. To maintain
color and corrosion resistance,
repainting may be required.
EASY FIELD FABRICATION Pultruded fiberglass can be field
fabricated using simple carpenter tools
with carbon or diamond tip blades.
Lightweight for easier erection and
installation.
Often requires welding and cutting
torches.
Heavier material requires special
handling equipment to erect and
install.
COST Lower installation and maintenance costs
in industrial applications often equals
lower lifecycle costs.
Lower initial material cost.
High Performance Solutions
PULTRUDED GLASS FIBER
VS.
Aluminum Extruded Shapes
Pultruded glass fiber reinforced structural shapes and plate have a number of significant advantages over aluminumextrusions. Pultrusion are electrically and thermally non-conductive, impact resistant, highly corrosion resistant and EMI/RFItransparent.
Is pultruded fiberglass the best material choice to meet the needs or requirements of your application? Features of bothpultruded fiberglass structural shapes and aluminum extruded shapes are compared on a point-for-point basis below.NOTE: Properties shown for pultruded fiberglass structural shapes, are approximate for typical off-the-shelf structural pultrusion.
COMPARE!Pultruded Fiberglass Structural Shapes
Aluminum Extruded Shapes
CORROSION RESISTANCE
Superior resistance to a broad range of
chemicals.
Surfacing veil and UV additives improve
weather ability.
Can cause galvanic corrosion.
Corrosion resistance can be increased
through anodizing or other coatings.
WEIGHTVery lightweight - about 70% the weight
of aluminum on a density basis.
Lightweight - about 1/3 that of copper or
steel.
ELECTRICAL CONDUCTIVITY Non-conductive - high dielectric
capability.
Conducts electricity - grounding
potential.
THERMAL CONDUCTIVITY
Insulates - low thermal conductivity,
4 (BTU/SF/HR/Fo/IN); low thermal
coefficient of expansion 4.4 (IN/IN/Fo)106.
Heat conductor - high thermal
conductivity.
150 (BTU/SF/HR/Fo/IN); thermal coefficient
of expansion 11-13 (IN/IN/Fo)106.
STRENGTH
Ultimate flexural strength (Fu)
LW = 30 ksi
CW = 10 ksi.
Pultruded fiberglass has 86% of the yield
strength of aluminum and, pound-for-
pound's, stronger than aluminum in the
lengthwise direction.
Flexural strength (Fu) 35 ksi.
Homogeneous material.
FINISHING AND COLOR
Pigments added to the resin provide
color throughout the part. Special colors
available. Composite design can be
customized for required finishes.
Silver color. Other colors require
prefinished, anodic coatings and paints.
Mechanical, chemical and electroplated
finishes can be applied.
EMI/RFI TRANSPARENCY
Transparent to radio waves, EMI/RFI
transmissions; used for radar and
antennae enclosures and supports.
Highly reflective.
FABRICATION
Easy field fabrication with simple
carpenter tools - utilizes adhesive
bonding and/or mechanical joining. No
torches or welding.
Good mach inability - welding, brazing,
soldering or mechanical joining.
COST
Slightly higher tooling costs; price per
lineal foot marginally higher.
Extrusion tooling is relatively inexpensive.
Part price comparable or slightly lower.
IMPACT RESISTANCE
Glass mat in pultruded fiberglass
distributes impact load to prevent
surface damage even in sub-zero
temperatures. Will not permanently
deform under impact.
Easily deforms under impact.
High Performance Solutions
Ability of
Profile & Size
High Performance Solutions
Our new case studies
Various application for rehabilitate / retrofit projects
By : Landasan Kapital (M) Sdn Bhd
Features
▪ Durable ▪ Impact Resistant ▪ Lightweight ▪ Low Maintenance ▪ Mildew Resistant
▪ Moisture Proof ▪ Never Needs Paint ▪ Termite Resistant ▪ Will Not Rot ▪ Will Not Rust
▪ Will Not Warp
High Performance Solutions
Case of the Unsafe Bridges and Walkways
Landkap fiberglass bridgesoffers a corrosion resistantand easy maintenancesolution. We were able to fitthe handrail & grating to theirspecifications which resultedin safe walking conditions.
BEFORE PROPOSE
This wooden walkway used ata recreational and resortsarea, after years of exposure torains and sun, is becomingrotten and is unsafe forwalking. Need a replacementfor the whole structure
BEFORE PROPOSE
Case of the Exposed Cabinets
A product of vandalism: Whatremained is a bundle ofsignaling cables and encoderunits left exposed andunprotected. Being a materialof considerable value, theStainless steel Cabinet isalways an attractive target ofvandals who cannot resistcarting it away.
Landkap propose FiberglassReinforced Polyester (FRP)Enclosure that housesEncoder units sits neatly inplace of the stolen StainlessSteel Cabinet. Safety lockingfeatures provide enhancedprotection against vandals.
Before
(wooden structural)
Propose
(FRP structural)
Before
(wooden grating)Propose
(FRP grating)
Profile
High Performance Solutions
AVAILABILITY OF FRP PROFILE(FIBER REINFORCE POLYMER)
FRP FLOOR/GRATING
PROPOSECOMPOSITE / FRP MATERIAL
Landasan Kapital (M) Sdn BhdCO. NO.:536101-K
Add: 34A, Jalan PSK 8, Pusat Perdagangan Seri Kembangan43300 Seri Kembangan, Selangor Darul EhsanTel : 03 8942 1761, 3982 | Fax : 03 8942 2872
Email : [email protected] or [email protected]