Technical Characteristics:

-Mdf 4mm thickness covered with A’ quality laminate.

-Full perimeter finger joint with interior boosting at the point of lock and the point of

bottom.

-Honeycomb 35mm thickness impregnated with resin.

-3 simple hinges. Optional 3 double hinges.

-Plywood frame oval or straight.

-Plywood ledges oval or straight.

-Interior oval lock and perimetric rubber.

-Dimensions of the door panels (63cm, 68cm-73cm-78cm-83cm-88cm-93cm).

-Maximum height 212cm or 218cm under special order.

Door Construction:

Wooden door frame, type FINGERJOINT. The door is covered on both sides with MDF

of 4mm thick.

Frame construction:

The frame is made of block board and the ledge is made of plywood. The adhesives

used are consisted of two components (polyurethane) very important for humidity.

Standard equipment:

-Three hinges screwable (single).

- Internal lock (inox or gold).

-Sealing rubber.