Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
KNOWLEDGE ENTERPRISE: INTELLIGENT STRATEGIES IN PRODUCT DESIGN, MANUFACTURING, AND MANAGEMENT
IFIP - The International Federation for Information Processing
IFIP was founded in 1960 under the auspices of UNESCO, following the First World Computer Congress held in Paris the previous year. An umbrella organization for societies working in information processing, IFIP's aim is two-fold: to support information processing within its member countries and to encourage technology transfer to developing nations. As its mission statement clearly states,
IFIP's mission is to be the leading, truly international, apolitical organization which encourages and assists in the development, exploitation and application of information technology for the benefit of all people.
IFIP is a non-profitmaking organization, run almost solely by 2500 volunteers. It operates through a number of technical committees, which organize events and publications. IFIP's events range from an international congress to local seminars, but the most important are:
• The IFIP World Computer Congress, held every second year; • Open conferences; • Working conferences.
The flagship event is the IFIP World Computer Congress, at which both invited and contributed papers are presented. Contributed papers are rigorously refereed and the rejection rate is high.
As with the Congress, participation in the open conferences is open to all and papers may be invited or submitted. Again, submitted papers are stringently refereed.
The working conferences are structured differently. They are usually run by a working group and attendance is small and by invitation only. Their purpose is to create an atmosphere conducive to innovation and development. Refereeing is less rigorous and papers are subjected to extensive group discussion.
Publications arising from IFIP events vary. The papers presented at the IFIP World Computer Congress and at open conferences are published as conference proceedings, while the results of the working conferences are often published as collections of selected and edited papers.
Any national society whose primary activity is in information may apply to become a full member of IFIP, although full membership is restricted to one society per country. Full members are entitled to vote at the annual General Assembly, National societies preferring a less committed involvement may apply for associate or corresponding membership. Associate members enjoy the same benefits as full members, but without voting rights. Corresponding members are not represented in IFIP bodies. Affiliated membership is open to non-national societies, and individual and honorary membership schemes are also offered.
KNOWLEDGE ENTERPRISE: INTELLIGENT STRATEGIES IN PRODUCT DESIGN, MANUFACTURING, AND MANAGEMENT
Proceedings of PRO LAM AT 2006, IFIP TC5 International Conference, June 15-17, 2006, Shanghai, China
Edited by
Kesheng Wang Department of Production and Quality Engineering, Norwegian University of Science and Teclinology Norway
George L. Kovacs Computer and Automation Institute and Technical University of Budapest Hungary
Michael Wozny Rensselaer Polytechnic Institute USA
Minglun Fang Shanghai University China
Springer
Library of Congress Control Number: 2006925471
Knowledge Enterprise: Intelligent Strategies in Product Design, Manufacturing, and Management Edited by K. Wang, G. Kovacs, M. Wozny, and M. Fang
p. cm. (IFIP International Federation for Information Processing, a Springer Series in Computer Science)
ISSN: 1571-5736/ 1861-2288 (Internet) ISBN: 10:0-387-34402-0 ISBN: 13:9780-387-34402-0 elSBN: 10:0-387-34403-9
Printed on acid-free paper
Copyi'ight © 2006 by International Federation for Information Processing. All rights reserved. This work may not be translated or copied in whole or in part without the written permission of the publisher (Springer Science+Business Media, LLC, 233 Spring Street, New York, NY 10013, USA), except for brief excerpts in connection with reviews or scholarly analysis. Use in connection with any form of information storage and retrieval, electronic adaptation, computer software, or by similar or dissimilar methodology now known or hereafter developed is forbidden. The use in this publication of trade names, trademarks, service marks and similar terms, even if they are not identified as such, is not to be taken as an expression of opinion as to whether or not they are subject to proprietary rights.
Printed in the United States of America.
9 8 7 6 5 4 3 2 1 springer.com
Organized and sponsored by
IFIP (International Federation for Information Processing) NSFC (National Natural Science Foundation of China) STCSM (Science and Technology Committee of Shanghai Municipality) SHMEC (Shanghai Municipal Education Commission) NTNU (Norwegian University of Science and Technology) SHU (Shanghai University)
International Program Committee:
Kesheng Wang, Norway Chair: Co-Cliairs
George L. Kovacs, Hungary Michel Wozny, USA Guy Doumeingt, France
Members:
Argentina, G. Henning Australia, C Avran Australia, P. Burnus Austria, Man-Wook Han Canada, D. Swayne China, Renchu Can Denmark, P. Falster Finland, R. Smeds France, G. Doumeingts France, R, Soenen Germany, D. Kochan Germany, E, Neuhold Germany, R. Denzer Hungary, G. L. Kovacs Israel, G. Halevi Italy, U Cugini Japan, E. F. Kimura Korea, B, K. Choi Mexico, A . Leon-Rovira Netherlands, H. Afsarmanesh
Norway, K. Wang Norway, Z Deng Poland, T. Czachorski Portugal, L M. Camarinha-Matos Slovenia, /. Rozman Sweden, T Kjellberg Switzerland, E. M. Gelle Switzerland, NMagnenat-Thalmann United Kingdom, R, A. Earnshaw United Kingdom, U Bititci USA, G. J, Oiling USA, H, Jamil USA, M. B. Mc Grath USA, M Wozny USA, R. Waxman USA, / . Vlietstra
VI
National Program Committee:
Chair: Minglun Fang, Shanghai University Co-Chairs: Xueyu Ruan, Shanghai Jiaotong University
Peigen Li, Huazhong University of Science and Technology Zhihang Lin, Xian Jiaotong University
Members:
Egao Cai, Harbin Institute of Technology University Mingyi Chen, Shanghai University Weiming Cheng, Shanghai University Minglun Fang, Shanghai University Zhenbang Gong, Shanghai University Peigen Li, Huazhong University of Science and Technology Zhihang Lin, Xian Jiaotong University Jinwu Qian, Shanghai University Xueyu Ruan, Shanghai Jiaotong University Min Tan, Institute of Automation Chinese Academy of Science Xiaoqing Tang, Beihang University Tao YUy Shanghai University Dongbiao Zhao, Nanjing University of Aeronautics and Astronautics Qinzhi Zhou, Shanghai Mashine Factory Ltd. Co. Songlin Zuang, University of Shanghai for Science and Technology
General Secretary:
Tao Yu^ Shanghai University Qingfeng Yuan, Shanghai University
Secretariat and Webmaster:
Cuilian Zhao, Shanghai University Hongxia Cai, Shanghai University Maying Ruan^ Shanghai University Jin Yuan^ Shanghai University Shuo Li, Shanghai University
Preface
PROLAMAT (PROgraming LAnguages for MAchine Tools) is a series of international conferences devoted to the filed of manufacturing - 1969 Roma, Italy; 1973, Budapest, Hungary; 1976, Stirling, Scotland; 1979 Ann Arbor, USA; 1982 Leningrad, USSR; 1992 Tokyo, Japan; 1995 Berlin, Germany; 1998, Trento, Italy; 2001, Budapest, Hungary; - organized by IFIP the International Federation for Information Processing. This triennial event has been a basic meeting for academic and industrial experts in manufacturing. Recently not only the original topics, but all other aspects of the computerized design and production of products and production systems from traditional to virtual ones have been covered and dealt with, including life-cycle issues.
This volume contains the edited version of the technical presentations of PROLMAT 2006, the IFIP TC5 international conference held on June 15-17, 2006 at the Shanghai University in China. The main theme of this conference is "Knowledge Enterprise". These proceedings focus on the issue of how to translate data and information into knowledge in manufacturing enterprises.
Profitability is no longer only a function of price, cost, and adequate quality. The way sustained competitive advantage relates to a firm is distinctive and it is difficult to replicate competencies. The basis for a firm's core competencies is its repository of organizational knowledge. This is highly-valued knowledge that provides opportunities for adding exclusive value to products and services of an enterprise. Knowledge strategy will be related to innovation, learning, and agility. Conversion of advanced research into advanced products; acquisition of knowledge from experience; and fast response-time to the dynamic market changes, are the important rules of international industrial competition at the moment. Innovation, learning, and agility are key factors for companies, which must shift in global markets rapidly and efficiently by delivering new products in the shortest time frame, while maintaining the highest quality and the lowest costs. The successful enterprise of our century will be characterized by an organizational structure that supports thinking process, experience transferring, knowledge discovery, and intelligence exploitation, all of which are based on data and information.
The success of a modern company is not based on its size but on its ability to adapt its operation to the changing environment. To answer to these constraints, the enterprise must develop a corporate culture that empowers employees at all levels and facilitates communication among related groups for constant improvement of its core competitiveness. Such an organizational structure requires a technological infrastructure that fully
viii Preface
organizational structure requires a technological infrastructure that fully supports process improvement and integration, and has the flexibility to adjust to unexpected changes in corporate direction. To keep up with rapid developments in global manufacturing, the enterprise must first look at its organization and culture, and then at its supporting technologies. Too often, companies invest only in technology to compete in the global market and don't give enough attention to the training, the education, and the knowledge of their employees. This conference concentrates also on knowledge strategies in Product Life Cycle and brings together researchers and industrialists with the objectives to reach a mutual understanding of the scientific - industry dichotomy, while facilitating the transfer of core research knowledge to core industrial competencies.
These proceedings of PROLAMAT 2006 are published in the well-known IFIP Series with Springer Publishers. The conference will be regularly held in the future. We hope that this conference will lead to further IFIP TC5 activities in the area, and bring people from industries, research institutes, and educational organizations closer together.
On behalf of the chairs of PROLAMAT 2006, I would like to thank the authors for their proficient contribution, the program committees for their invaluable help in reviewing the papers and organize the conference, and all of the individuals who contributed to the editing of the conference proceedings. Finally, I would like to thank the National Natural Science Foundation of China (NNSFC), Science and Technology Committee of Shanghai Municipality (STCSM) and Shanghai Municipal Education Commission (SHMEC) for their financial support to the conference.
Kesheng Wang 15 March 2006
Trondheim
Table of Contents
Preface vii
Table of Contents ix
Part 0. Keynote Papers
1. Data Mining in Manufacuring: the Nature and Implications
Kesheng Wang 1
2. Management and Production Control Issues of Distributed Enterprises
George L. Kovdcs 11
3. Digital Processes in Product Creation Gustav J. Oiling 21
4. Collaborative Networks Luis M. Camarinha-Matos, Hamideh Afsarmanesh 26
5. Knowledge Management in Small and Medium-Sized Enterprises
Wladimir Bodrow 41
6. Integrated Quality Information System and China Experience
Xiaoqing Tang, Guijiang Duan 54
Part 1. Knowledge Discovery and Management in Manufacturing
7. Agent-Based Framework for Modelling of Organization and Personal Knowledge from Knowledge Management Perspective
Janis Grundspenkis 62
8. Evaluation Model of Mnes' Knowledge Flow Management
Fengming Tao, Weidong Meng 71
9. knowledge based manufacturine system Gideon Halevi, Kesheng Wang 79
10. Knowledge Management In Manufacturing: The soft side of knowledge systems
Ove R. Hjelmervik, Kesheng Wang 89
X Table of Contents
11. DSM as a knowledge capture tool in CODE environment Syed Ahsan Sharif, Berman Kayis 95
12. Research on Acquiring Design Knowledge Based on Association Rule
Jingmin Li, Yongmou Liu, Jiawei Yang, Jin Yao 103
13. Analysis of ISO 6983 NC Data Based on ISO 14649 CNC Data Model
Hiroshi Yamada, Fumiki Tanaka, Masahiko Onosato 109
14. Enterprise Knowledge Management Based on PLONE Content Management System
Chuanhong Zhou, Huilan Zeng 115
15. Knowledge Management for Process Planning KetilB0 121
16. Adapting Manufacturing to Customer Behavior Stephan Kassel, Kay Grebenstein 127
17. Approach for a Rule Based System for Capturing and Usage of Knowledge in the Manufacturing Industry
Jivka Ovtcharova, Alexander Mahl, Robert Krikler 134
18. Neural Network System for Knowledge Discovery in Distributed Heterogeneous Data
Timofeev A.V, Azaletskiy P.S, Myshkov PS, Kesheng Wang 144
19. Assessment of Surface Roughness Model for Turning Process
Yasir Hadi, Salah Gasim Ahmed 152
Part 2. Product Design and Optimization
20. A Study on Product Optimization Design Based on Genetic Algorithms
Guiqin Li , Xiaojian Liu, Qinfeng Yuan, Minglun Fang 159
21. Design of the Body Frame of a Rail Detector Jiang an g Bao 165
22. The Spatial Shape Representation and 3D Modeling of Special-shape Spring
Xiangchen Ku, Runxiao Wang, Jishun Li, Dongbo Wang 171
23. Three-dimensional Multi-pipe Route Optimization Based on Genetic Algorithms
Table of Contents XI
Huanlong WangyCuilian Zhao,Weichun Yan ,Xiaowei Feng 177
24. Axiomatic Design Using Ontology Modeling For Interoperability in Small Agriculture Machinery Product Development
Jiandong Jiangs Fang Xu, Xinrong Zhen, Xian Zhang, Yangyu Wang, Libin Zhang 184
25. Maximum Entropy Optimum Design for Product Structure Xu Yang, Xingyuan Wang 192
26. Product Robust Design with A Mixture of Random and Interval Factors
Chuntao Liu, Zhihang Lin 198
27. Root Cause Analysis of an Artillery Breechblock and its Improved
Wenyuan Song, Jianshe Kang, Lianyan Shi, Yabin Wang 205
28. A Problem-specific Genetic Algorithm for Path Planning of Mobile Robot in Greenhouse
Xuemei Liu, Jin Yuan, Kesheng Wang 211
29. Research on the Dynamics of Flexible Manipulators Li Tu, Jinlian Deng , Huanya Cao' ,Pixuan Zhou 217
30. Implementation of FPC Concept in Electrical Wire Equipment Design
Hui Zhao,Lixin Lu,Limin Li,Jun Chen 224
31. The Designation of Cam's Contour for Piston Pump with Steady Flux
Zhongxu Tian, Xiaochuan Chen 231
32. A Study of System Balance and Cycle Optimization for Multi-operational Equipment and its Implementation
Huan You, Lixin Lu, Limin Li 237
33. Analysis on Product Technical Risk with Bayesian Belief Networks
Ming Chen, Yun Chen, Bingsen Chen, Qun Wang 244
34. The Application of Inverter-Driven Technology on the Crimping Machine
Runqing Zhu, Lixin Lu, Limin Li, Huan You 250
35. An Effective Algorithm of Shortest Path Planning in a Static Environment
Lingyu Sun, Xuemei Liu, Ming Leng 257
xii Table of Contents
Part 3. Data Mining in Manufacturing
36. Predicting assembly quality of complex structures using data mining
Ekaterina S, Ponomareva, Kesheng Wang, Terje K. Lien 263
37. The Development of the Virtual Data Acquisition and Analysis System
Xiumin Yang, WeihuaTian, Ling Jiang, YongshuGuo, Bo Wan 269
38. Integration of Data Mining with Game Theory Yi Wang 275
39. Data Mining and Critical Success Factors in Data Mining Projects
Yun Chen, Dengfeng Hu, Guozheng Zhang 281
40. Customer Segmentation in Customer Relationship Management Based on Data Mining
Yun Chen, Guozheng Zhang, Dengfeng Hu, Shanshan Wang 288
41. An Effective Refinement Algorithm Based on Multilevel Paradigm for Graph Bipartitioning
Ming Leng, Songnian Yu, Yang Chen 294
42. A Framework of Analysis: Approaches in the Applications ofE-CRM
Dengfeng Hu, Yun Chen, Guozheng Zhang 304
43. Parallel Sequence Alignment Algorithm for Clustering System
Yang Chen, Songnian Yu, Ming Leng 311
Part 4. Manufacturing Logistics and Supply Chain Management
44. Managing the Supply and Demand Uncertainty in Assembly Systems
Hongze Ma, Kesheng Wang 322
45. Study of Data Mining Technique in Colliery Equipments Fault Diagnosis
Hongxia Pan, Jinying Huang, ZonglongXu 328
46. A Multi-Agent System Framework for Supply Chain Management under District Alliance Setting
Fangzhong Qi, Gengui Zhou, Yongzhu Qi 334
Table of Contents xi
47. Research Info "Bullwhip Effect" in Supply Chain Management System Based on WSRF in Grid
Yan Kang, Shiying Kang 344
48. A Framework for Holistic Greening of Value Chains Wei Deng Solvang, Elisabeth Roman, Ziqiong Deng, Bj0rn Solvang 350
49. Study on Value-Based Model of Products Package Management
Ying Liu, Fengming Tao, Fei Liu 356
50. Project Management Standardization and R&D Project Performance: A Cross-National Comparison
Xiaohong Zhou 363
51. A BPR Methodology For Product Development Processes M. Bertoni, U. Cugini, D. Regazzoni, C. Rizzi, M. Ugolotti 370
52. Data Management in Group Purchasing System ZongfengZou, Tao Yu 379
53. Supply Chain Management in Small and Medium-Sized Enterprises
Peter Nyhuis, Katja Hasenfufi 386
54. An Operations Model to Support Manufacturing Logistics Processes in the Supply Chain
Jan Ola Strandhagen, Heidi Dreyer 393
55. Development of a Decentralized Logistics Controlling Concept
Peter Nyhuis, Felix Wriggers, Andreas Fischer 399
Part 5. Computer Aided Innovation
56. Modeling the Variability with UML for TRIZ Based CAI System
Jianhong Ma, Runhua Tan 406
57. Effect and Effect Chain in Functional Design Guozhong Cao, Haixia Guo, Runhua Tan 412
58. Study on Integrating Application Method for AD and TRIZ Zishun Chen, Runhua Tan 421
59. Research on Product Innovative Design Method Driven by Client Demands
XIV Table of Contents
Limin Li, Guiqin Li, Shi'an Huang 433
60. The Innovative Design of Reciprocating Seal for Hydraulic Cylinder Based on TRIZ Evolution Theory
Fuying Zhang, Hui Liu, Linjing Zhang 440
61. Innovative Design of the Seal Structure of Butterfly Valve Based on TRIZ
Jianhui Zhang ,Runhua Tan, Ping Jiang, Jinling Dai 450
62. The Determination Method and Resolving Procedure of Design Conflict Based on Evolution Pattern and Prerequisite Tree
Lihui Ma,Runhua Tan 457
63. Research on Development of Color Sorter Using Triz Lihong He, Zhanwen Niu, Dongliang Chen 465
64. Computer Aided Innovaton of Crankshafts Using Genetic Algorithms
Humberto Aguayo Tellez, Noel Leon Rovira 471
65. Development of a Cai System of Standard Solutions Based on TRIZ
Bojun Yang, Runhua Tan, Yumei Tian 477
Part 6. Intelligent Manufacturing Systems
66. Study on Optimization of Stir Head for FSW Based on Genetic Algorithm
Zhaoxin Meng, Hui Chen, Xihua Yue 483
67. Research on CNC Technology Based on CAD&CAPP Tao Yu, Tan Liu, Shuzhen Yang, Wenbin Wang 492
68. Development of Enterprise Portal for Intelligent Mold Shop B.K. Choi, H Y. Lee, D. W. Lee, and TD. Kim 498
69. Realization of Intelligent Control for Roll Shape in Roll GrindERNC Machine
Liwen Yan, Tao Yu,Yi Pan 505
70. Application of Grey System Model to Thermal Error Modeling on Machine Tools
YongxiangLr , Jianguo Yang, Hongtao Zhang, Hengchao Tong 511
71. Nozzle Design and Assistant-Gas Flow Analysis in the Co2 Laser Cutting
Table of Contents
Jun Chen, Lixin Lu, Limin Li, Hui Zhao 519
72. Intelligent Metal Powder Laser Forming System Fei Xing, Weijun Liu, Kai Zhang, Xiaofeng ShangTianran Wang 525
73. Study on Dynamic Characteristics of a New Type of Transmission
Changping Zou 536
74. The Application of Embedded Technology in NC System Yong Yin, Zude Zhou, Quan Liu, Fangmin Li, YihongLong 544
75. The Research of Fuzzy PID Control Strategy Based on Neural Network in the Tension System
Yongyi He, Shuai Guo, Qihong Zhou 550
76. An Efficiency Model of Multistage Electromechanical Machines
Lixin Lu, Limin Li, Yanjun Huang 557
77. Prediction of the Cutting Depth of Abrasive Suspension Jet Using a Bp Artificial Neural Network
Xiaojian Liu, Tao Yu, Wenbin Wang 563
Part 7. Manufacturing Monitoring and Diagnosis
78. Research and Implement of Quality Management System in ERP
YibingLi 570
79. A Monitoring System for PLC Controlled Manufacturing System Based on Fieldbus
Xiaofeng Song, Shili Tan, Junjian Ding 576
80. Research of Parameter Monitoring System in Sugar Boiling Process
Jianjun Su, Yanmei Meng, Huaqiang Qin, Xu Kai 582
Part 8. Product Life Cycle Management
81. A Decision Method of Materiel Maintenance Based on Failure Life Cycle
Wenyuan Song, Lian Yan Shi, Jian She Kang 591
82. Discussion on CSCW Methods for Embedded Systems Tao Yu, Tan Liu, Shuzhen Yang, Wenbin Wang 597
XV
XVI Table of Contents
83. A System of Wine Blending Based on Neural Network Jianping Ren, Zhimin li 604
84. Family Cars' life Cycle Cost (LCC) Estimation Model Based on the Neural Network Ensemble
Xiaochuan Chenjun Shao,Zhongxu Tian 610
85. A XML-based Research on Integration Technology Between PDM and Enterprise Content Management System
Chuanhong Zhou, Jigan Zhan 619
86. Application Research of Wireless Equipments in PLM ChuanHong Zhou, Yong Shi, Qiang Wang 625
87. Methods for Calculating the Transmission Torque of Magnetic Transmission Mechanisms
Shunqi Mei, Zhiming Zhang, Renbin Xiao 631
88. Sustainable Industrial System (SIS) OddMyklebust 637
Part 9. Integration of CAD/CAPP/CAM/CIMS
89. Modeling Technology and Application of Repairing Bone Defects Based on Rapid Prototyping
Xusheng Yuan, Qingxi Hu, Hanqiang Liu, Chunxiang Dai, Minglun Fang 643
90. A Study of the Method of Reconstructing the Bionic Scaffold for Repairing Defective Bone Based on Tissue Engineering
Hanqiang Liu, Qingxi Hu, Limin Li, Minglun Fang 650
91. Hydraulic Cylinder CAD Design System Based on Product Disposition
YigangHu, YonggangShen 658
92. The Reuse Study of Small Agricultural Machinery's Product Information Model
XuejunSun, Jiandong Jiang, FangXu, Libin Zhang 664
93. Study of CAD-integrated Analysis for Complex Structures Hirpa L. Gelgele 673
94. CAD/CAM Research on Radial Non-circular Gears Jiang Han , Dongdong Zhang, Lian Xia 679
95. Special CNC Based on Advanced Controller
Table of Contents XVll
Junxi Bi, Tao Yu, Qiang Li 685
96. A Unified Decision Model for Evaluation and Selection of MES Software
Liang Chao, Qing Li 691
97. 3D Modeling and Capacity Calculation System in Tank Calibration
Cuilian Zhao, Minglun Fang, Zhongxu Tian, Yongsui Lin 697
98. Study on 3D Solid Reconstruction from 2D Views Based on Intelligent Understanding of Mechanical Engineering Drawings
Jianping Liu, Bangyan Ye, Xiaohong Wu, Miaoan Ouyang 704
Part 10. Manufacturing Systems and Processes
99. Bone Tissue Engineering Using B-Tricalcium Phosphate Scaffolds Fabricated via Selective Laser Sintering
Liulan Lin, Baigong Ma, Xianxu Huang, Qingxi Hu, Minglun Fang 710
100. Logic Programming for Machine Tools Reggie Davidrajuh 717
101. Analyze and Research of Corrosion Resistance of Laser Cladding Layer on the Anti-acid Stainless Steel Surface
Gey an Fu, Jianjun Shi, Tuo Shi 723
102. Material Removal Mechanisms Analysis in the Finishing Machining of Engineering Ceramics
Changhe Li, Guangqi Cai 729
103. Investigation of Expansion Characteristics of Coronary Slot Stents Using Finite Element Analysis
Xuanzhi Wang, Syed H. Masood 735
104. Study on Application of High Speed Milling in Dies Manufacturing for Plate Heat Exchangers
Xiaoyang Wang, Limin Li 743
105. The Application of Least Square in Precision Cylindrical Grinding
Dawei Fu, Li Su, Yang Wang 749
106. The Application of the Genetic Algorithm to the Numerical Simulation in Sheet Metal Forming
JingjingXu, ChangdongLi, Yimin Wu, Wei Huang 755
XVlll Table of Contents
107. The Coverage Form of Surface Coating and Crack of Basal Body Under Multi-Impact Loads
Shihong Shi, Keyun Di, Anjun Wang 761
108. Effect of Specimen Size on Strength Reliability of Fiber Reinforced Composite
Yun Lu, Hideharu Fukunaga 767
109. A Hybrid Intelligent Approach for Optimal Control of Seed Cleaner
Jin Yuan, Tao Yu, Kesheng Wang 780
110. Numerical Simulation of Transient Temperature Field for Laser Direct Metal Shaping
Risheng Long, Weijun Liu, Xiaofeng Shang 786
111. Fault Tolerant System Design Based Fuzzy Observer Yihu Huang, Guangxin Zhang, Ximei Jia 797
112. Reliability Analysis for Manufacturing Grid QimingZou, Tao Yu,Haiyang Sun 803
113. Construction of Forewarning Risk Index Systems of Venture Capital Based on Artificial Neural Network
Guozheng Zhang, Yun Chen, Dengfeng Hu 812
114. Research on Performance Test and Evaluation Method of Assembly Packaging Ammunition
Wenzhao Li, Wei Wang, Min Gao, Junto Wang 818
Part 11. Production Management
115. Support Vector Regression for Financial Time Series Forecasting
Wei Hao, Songnian Yu 825
116. QoS Management in Manufacturing Grid HaiyangSun, Tao Yu, Lilan Liu, Yu'an He 831
117. A New Method Based on Immune Algorithm to Solve the Unit Commitment Problem
Wei Li, Deren Sheng, Jianhong Chen, Zhenfu Yuan, Kefa Cen 840
118. Enterprise Information Integration: State of the Art and Technical Challenges
Jingtao Zhou, Mingwei Wang, Han Zhao 847
Table of Contents XIX
119. Resource Sharing Technology in the Automobile Parts Manufacture Grid
Yufeng Ding, Zhongling Wei ,Buyun Sheng 853
Part 12. Manufacturing Planning and Scheduling
120. Ant Colony Optimization for Manufacturing Resource Scheduling Problem
Wang Su, Meng Bo 863
121. Machine Work Planning Using Workpiece Agents in an Autonomous Decentralized Manufacturing System
Michiko Matsuda, Satoshi Utsumi, Yasuaki Ishikawa 869
122. Genetic Local Search Algorithms for Single Machine Scheduling Problems with Release Time
Jihchang Hsieh, Peichann Chang, Shihhsin Chen 875
123. Controlling Powder Deposition Process Using Fuzzy Logic Systems
Kesheng Wang, Paul Akangah, Qingfeng Yuan 881
124. Flexible dynamic scheduling based on immune algorithm Jianjun Yu, Shudong Sun, Jinghui Hao 887
125. Fuzzy Decision on Traverse Speed for Abrasive Suspension Jet
Wenbin Wang, Tao Yu, Xiaojian Liu, Tan Liu 896
126. Research on Manufacturing Resource Discovery and Scheduling in Manufacturing Grid
Yu'an He, Tao Yu, Lilan Liu, HaiyangSun 902
127. Research on WSRF-based Resource Management Model and Encapsulation in Manufacturing Grid
Yu'an He, Tao Yu, Bin Shen 908
128. The Performance Analysis of a Multi-objective Immune Genetic Algorithm for Flexible Job Shop Scheduling
XiuLi Wu, ShuDongSun, GangGangNiu, YinNiZhai 914
Part 13. Co-Operation Infrastructure for Virtual Enterprises
129. Towards Service Oriented Enterprise Sodki Chaari, Frederique Biennier, Chokri Ben amar, Joel Favrel 920
X X Table of Contents
130. Manufacturing Resource Management for Collaborative Process Planning
Ziqiang Zhou, Mujun Li, Liguan Shen 926
131. The Uniform Knowledge Representation for On-line Product Semantic Reconstructions of Virtual Organization
Chengfeng Mart 932
132. Access Control Model of Manufacturing Grid Hongxia Cai, Tao Yu, Minglun Fang 938
133. Research on Strategic Architecture of Collaborative Business System
Zhiwei Mi, Wenwu Mao, Minglun Fang 944
134. A Workflow Management System for Dynamic Alliance Zhiqiang Gu, Gangyan Li, Kunpeng Wang 950
135. A Region Growing Algorithm for Solving CVE Partitioning Problem
Xiaomei Hu, Zhengjun Zhai, Xiaobin Cai 960
Part 14. Virtual Manufacturing in Design and Production
136. Visual Studies on Rice Bran Extrusion Wenhua Zhu , Huiyuan Yao 966
137. Implementation of Web Resource Service to Product Design Baoli Dong, Sumei Liu 972
138. Engineering Testing Process Management System Based on .NET Framework
Liang Jin, GandiXie, CaiXing Lin 978
139. Research on the Picture Collected by Microminiature Aircraft to Construct Digital Elevation Model
Likang Shao, Guangxing Wei, Qiyu Yang, Xisheng Wu 984
Part 15. Mass Customization
140. Analysis on Product Technical Risk with Bayesian Belief Networks
Ming Chen, Yun Chen, Bingsen Chen, Qun Wang 990
141. Handling Variability in Mass Customization of Software Family Product
Jianhong Ma, Runhua Tan 996
Table of Contents x
142. A Process Model of Product Platform Building for the Products with the Same function Structure
Huangao Zhang, Wenyan Zhao, GuopingLi, Runhua Tan 1002
143. A Top-Down Approach To an Armoured Face Conveyor Family Design
Guoping Li, Huangao Zhang, Wenyan Zhao, Haixian Zhao, Runhua Tan 1010
144. Study on the Response Characteristics of Automatic Welding Filter
HuifangLiu, ShiliangJin, Hutting Xiao, Yue Hong, Longji Shen 1016
145. Research on Module-based Variant Design for Mass Customization
Junjian Ding, Shili Tan, Haihong Zhang, Xiaofeng Song 1022
146. Applied Research on Technologies of Design for Mass Customisation
Qiaoxiang Gu, Guoning Qi, Shaohui Su, Yujun Lu 1030
147. Hidden Pattern of Innovation HansjUrgen Linde, Gunther Herr, Andreas Rehklau 1037
Author Index 1042