Click here to load reader
Upload
phunganh
View
299
Download
8
Embed Size (px)
Citation preview
Knorr Disc Brake Component ChartFor more detailed information regarding BPW Knorr Disc Brakes refer to our Knorr Disc Brake Spare Parts catalogue for Australian assembled BPW axles.
KDBCC V01-2013
REPLACEMENT CALIPERS
Caliper Item No. Caliper Description Caliper Carrier Item No. Complete Assembly
0536270600RAT
0536270610RAT
Rationalised Caliper Right Hand SB3745
Rationalised Caliper Left Hand SB374502.0313.13.00
05.362.70.36.5
05.362.70.37.5
CALIPER CARRIER ATTACHING PARTS
Item No. Part No. Description Dimension Qty Per Axle
315
02.5029.87.20 Bolt (Torque 280-330Nm) M 16x1.5x60 10/4*
02.5029.85.21 Bolt (Torque 280-330Nm) to suit Caliper spacer M 16x1.5x65 10
02.5029.88.21 Bolt Steer Axle (Torque 280-330Nm) M 16x1.5x60 4
02.5051.10.21 Bolt Steer Axle (Torque 280-330Nm) M 16x1.5x60 2
318 02.5401.16.08 Washer Ø 17 10
0316434020TS Caliper Spacer** 4
*10 screws for non-steer axle, 4 screws for steer axle**Caliper spacer item number 310A used on 10 stud 335 PCD and 8 stud 275 PCD models
BRAKE PARTS
Item No. Part No. Description Qty Per Axle
Kits
0980106240/310Guide pins and seal kit suits Caliper type A & B *See note right (Includes items 325 - 328, 335, 36, 345 - 348, 354, 355, 373)
2
09.801.06.33.0Guide pins and seal kit suits Caliper type C (Includes items 325 - 328, 345 - 348, 350, 352, 373)
2
09.801.02.63.0Thrust pad and boot kit suits Caliper type A and B (Includes items 362 - 364)
2
09.801.06.32.0Thrust pad and boot kit suits Caliper type C (Includes items 362 - 364)
2
0980106250-35mmKit adjuster adaptor and 35mm cap (includes 10x item 368 and 10x item 369)
2
0980106250-38mmKit adjuster adaptor and 38mm cap (includes 10x item 368 and 10x item 369)
2
09.801.08.15.0Brake Pad Kit ***See note right (Includes items 368, 369, 370, 390, 394, 396, 397, 398)
1
368 02.2400.11.00 Adjuster adaptor suits Caliper type B and C 2
369 02.1827.04.00 Cap, adjuster adaptor suits Caliper type A 2
ROTORS
Part No. Description Qty Per Axle
03.088.34.04.0 Rotor 10 stud 335mm PCD (ABS mounting) 2
03.088.34.06.0 Rotor 10 stud 335mm PCD 2
03.088.34.07.0 Rotor 10 stud 285mm PCD 2
03.088.34.15.0 Rotor 8 stud 275mm PCD 2
03.088.34.16.0 Rotor 8 stud 275mm PCD (ABS mounting) 2
REPLACEMENT CALIPERS
Caliper Item No. Caliper Description Caliper carrier Item No. Complete Assembly
0536270600RAT
0536270610RAT
Rationalised Caliper Right Hand SB3745
Rationalised Caliper Left Hand SB374503.303.88.55.0
05.362.70.60.5
05.362.70.61.5
0536270620RAT
0536270630RAT
Caliper Right Hand SB4309T Monoblock
Caliper Left Hand SB4309T Monoblock03.303.88.56.0
05.362.70.62.5
05.362.70.63.5
CALIPER CARRIER ATTACHING PARTS
Item No. DescriptionSB3745T & SB4309T
Qty Per AxlePart No. Dimension
315 Caliper mount bolt 03.340.12.26.0 M16x1.5x97-12.9 8
318 Washer 02.5401.16.08 Ø 17mm 8
BRAKE PARTS
Item No.
DescriptionSB3745T SB4309T Qty Per
AxlePart No. Part No.
Kits
Guide pins and seal kit for calipers with steel plate* (Includes items 325 - 355, 373)
09.801.06.33.0 2
Guide pins and seals kit for calipers with plastic plate* (Includes items 325 - 355, 373)
0980106330KB 2
Loose bearing (“secondary guide pin”) kit (Items 345, 346, 348, 350, 373)
09.801.06.91.0 2
Thrust pad and boot kit (Items 362 - 364, 373)
09.801.06.32.0 2
Kit adjuster adaptor and 35mm cap (includes 10x item 368 and 10x item 369)
0980106250-35mm 2
Kit adjuster adaptor and 38mm cap (includes 10x item 368 and 10x item 369)
0980106250-38mm 2
Brake Pad Kit Axle Set **See note left (Items 368 - 370, 390, 394, 396 - 398)
09.801.08.15.0 09.801.08.16.0 1
368 Adjuster adaptor 02.2400.11.00 2
ROTORS
Part No. Description Dimension Qty Per Axle
03.088.34.16.0 Rotor 8 stud 275mm PCD SB3745T Ø 377mm 2
03.088.35.06.0 Rotor 10 stud 285mm PCD SB4309T Ø 430mm 2
03.088.35.12.0 Rotor 10 stud 335mm PCD SB4309T Ø 430mm 2
KNORR DISC BRAKE COMPONENT CHARTFor more detailed information regarding BPW Knorr Disc Brakes refer to the
BPW Transpec Knorr Disc Brakes Parts catalogue for Australian assembled BPW axles ALWAYS INSIST ON GENUINE BPW SERVICE PARTS
CALIPER IDENTIFICATION INFORMATION SB3745T / SB4309T
CALIPER CARRIER ATTACHING PARTS
Item No Part No Description Dimension Qty Per Axle
310A 0316434020TS Caliper Spacer ** 4
315 0250298720 Bolt (Torque 280-330Nm) M 16x1.5x60 10/4 *
0250298521 Bolt (Torque 280-3300Nm) M 16x1.5x65 10
0250298821 Bolt Steer Axle (Torque 280-330Nm) M 16x1.5x60 4
0250511021 Bolt Steer Axle (Torque 280-330Nm) 2
318 0254011608 Washer Ø 17 10
Washer 10
*10 screws for non-steer axle, 4 screws for steer axle ** Caliper spacer item number 310A used on 10 stud 335 PCD and 8 stud 275 PCD models
* Repair Kits differ in the design of the guide sleeve:
Guide sleeve for Caliper Type A Stop Ring ∅ = 35 mm
Guide sleeve for Caliper Type B & C Stop Ring ∅ = 39 mm
*** Disc Brake Pads:
Are not available individually and can only be supplied in a kit which repairs one axle. The part number for the individual pads are found on the brake pad backing plate. Single disc brake pad part number 0509290050 to suit SB3745 can only be supplied in kit part number 0980107240.
old executions
(Renolit HLT 2)
(Renolit HLT 2)
348
396397
398
390
394
364363
315 318
362
354355
345
373
368370
395
350
346
373
346
348
369
328
335337
326
325
345
336335
325
326328
20 / 21
SB3745
REPLACEMENT CALIPERS
Caliper Item No Caliper Description Caliper carrier Item No
0536270600RAT Rationalised Caliper Right Hand SB3745 0203131300
0536270610RAT Rationalised Caliper Left Hand SB3745 0536270360 Caliper Right Hand SB3745 Monoblock ABS (Complete with carrier) 0536270370 Caliper Left Hand SB3745 Monoblock ABS (Complete with carrier)
Brake Type SB 3745 Caliper bolts are bolted in line with the axle beam.
Axially Mounted Calipers:
Brake TypeSB 3745T/4309T Tangential Mounting: Caliper bolts are bolted at an angle to the axle beam.
Tangentially Mounted Calipers:
Right Hand Caliper = Adjuster screw is on the opposite side of the caliper from the fixed guide pin.
Left Hand Caliper = Adjuster screw is adjacent to the fixed guide pin.
Please Note: For underslung suspensions the right hand caliper is used on the left hand side of the axle and the left hand caliper is used on the right hand side of the axle. When identifying right or left handed calipers you must know whether the suspension is underslung or overslung. Overslung = suspension springs over axle Underslung = suspension springs under axle
LEFT AND RIGHT HANDED CALIPERS
CALIPER MOUNTING
Steel cap with o ring from mid 2000.
Bellow with hose clip up to mid 2000.
Two part housing
Type A - 8mm hex adjustment screw with flat plastic cover.
Type B - 10mm hex sacrificial adjuster screw with domed rubber
cover.
CALIPER TYPES A, B, & C
One part housing
Flat steel cover
10 mm hex sacrificial adjuster screw with domed rubber
cover
IDENTIFYING FEATURES OF CALIPER TYPES A AND B: IDENTIFYING FEATURES OF CALIPER TYPE C :
(Renolit HLT 2)
(Renolit HLT 2)
348
396397
398
390
394
364363
362
354355
345
373
368370
395
350
346
373
328
335
326
325
318315
KDBCC V01-2013
REPLACEMENT CALIPERS
Caliper Item No Caliper Description Caliper carrier Item No
0536270600RAT Rationalised Caliper Right Hand SB3745 033088550
0536270610RAT Rationalised Caliper Left Hand SB3745 0536270600 Caliper Right Hand SB3745T Monoblock (Complete with carrier) 0536270610 Caliper Left Hand SB3745T Monoblock (Complete with carrier) 0536270620RAT Caliper Right Hand SB4309T Monoblock
033088560 0536270630RAT Caliper Left Hand SB4309T Monoblock 0536270620 Caliper Right Hand SB4309T Monoblock (Complete with carrier) 0536270630 Caliper Left Hand SB4309T Monoblock (Complete with carrier)
(Rotor diameter = 370mm)(Rotor diameter = 370mm) (Rotor diameter = 430mm)
Single disc brake pad part number 0509290220 to suit SB3745T can only be supplied in kit part number 0980108150.Single disc brake pad part number 0509290230 to suit SB4309T can only be supplied in kit part number 0980108160.
Axially mountedTangentially mounted
ROTORS
Part No Part No Qty Per Axle
0308834040 Rotor 10 stud 335mm PCD (ABS mounting) 2 0308834060 Rotor 10 stud 335mm PCD 2 0308834070 Rotor 10 stud 285mm PCD 2
0308834150 Rotor 8 stud 275mm PCD 2
0308834160 Rotor 8 stud 275mm PCD (ABS mounting) 2
BRAKE PARTS
Item No Part No Description Qty Per Axle
Kits
0980106310 Guide pins and seal kit suits Caliper type A * See note below (Includes items 325 - 328, 335, 36, 345 - 348, 354, 355, 373) 2
0980106240 Guide pins and seal kit suits Caliper type B * See note below (Includes items 325 - 328, 335, 336, 345 - 348, 354, 355, 373) 2
0980106330 Guide pins and seal kit suits Caliper type C (Includes items 325 - 328, 345 - 348, 350, 352, 373) 2
0980102970 Main pin kit suits Caliper type A and B (Includes items 325 - 328, 335 - 337, 354, 355, 369, 373) 2
0980102630 Thrust pad and boot kit suits Caliper type A and B (Includes items 362 - 364) 2
0980106320 Thrust pad and boot kit suits Caliper type C (Includes items 362 - 364) 2
0980106250 Adjuster adaptor and cap kit (Includes items 368 and 370) ** See note below 2
0980108150 Brake Pad Kit *** See note below (Includes items 368, 369, 370, 390, 394, 396, 397, 398) 1
368 0224001100 Adjuster adaptor suits Caliper type B and C 2
369 0218270400 Cap, adjuster adaptor suits Caliper type A 2
ROTORS Part No Description Dimension Qty Per Axle
mm773 Ø T5473BS DCP mm572 duts 8 rotoR 0614388030 2 mm034 Ø T9034BS DCP mm582 duts 01 rotoR 0605388030 2
m034 Ø T9034BS DCP mm533 duts 01 rotoR 0505388030 m 2
CALIPER CARRIER ATTACHING PARTS
Item No Description SB3745T SB4309T Qty Per
Axle Part No Dimension Part No Dimension
315 Caliper mount bolt 0334012260 M16x1.5x97-12.9 0334012260 M16x1.5x97-12.9 8
318 8 mm71 Ø 8061104520 mm71 Ø 8061104520 rehsaW
BRAKE PARTS
Item No Description SB3745T SB4309T Qty Per
Axle Part No Part No Guide pins and seal kit
0980106330 2
Kits
(Includes items 325 - 355, 373) Guide pins and seals Kit suits caliper item numbers
0980106330KB 2 0536270620RAT and 0536270630RAT (Includes items 325 - 355, 373) Loose bearing ("secondary guide pin") kit
0980106910 2
(Items 345, 346, 348, 350, 373) Thrust pad and boot kit
0980106320 2
(Items 362 - 364, 373) Adjuster adaptor and cap kit * See note below
0980106250 2
(Items 368, 370) Brake Pad Kit Axle Set ** See note below 0980108150 1 (Items 368 - 370, 390, 394, 396 - 398)
368 Adjuster adaptor 0224001100 2
0980108160
Caliper Identification Information
CALIPER MOUNTING
Axially Mounted Calipers
Brake Type SB 3745
Caliper bolts are bolted in line with the axle beam.
Tangentially Mounted Calipers
Brake Type SB 3745T/4309T
Tangential Mounting:Caliper bolts are bolted at an angle to the axle beam.
KNORR DISC BRAKE IDENTIFICATION
CALIPER MOUNTING
Axially Mounted Calipers:
Brake Type SB 3745 Caliper bolts are bolted in line with the axle beam.
Tangentially Mounted Calipers:
Brake TypeSB 3745T/4309T Tangential Mounting: Caliper bolts are bolted at an angle to the axle beam.
LEFT AND RIGHT HANDED CALIPERS
Right Hand Caliper = Adjuster screw is on the Left Hand Caliper = Adjuster screw is adjacent to opposite side of the caliper from the fixed guide pin. the fixed guide pin.
BPW Transpec Knorr Disc Brake Axle Parts Catalogue 3/2013 2
KNORR DISC BRAKE IDENTIFICATION
CALIPER MOUNTING
Axially Mounted Calipers:
Brake Type SB 3745 Caliper bolts are bolted in line with the axle beam.
Tangentially Mounted Calipers:
Brake TypeSB 3745T/4309T Tangential Mounting: Caliper bolts are bolted at an angle to the axle beam.
LEFT AND RIGHT HANDED CALIPERS
Right Hand Caliper = Adjuster screw is on the Left Hand Caliper = Adjuster screw is adjacent to opposite side of the caliper from the fixed guide pin. the fixed guide pin.
BPW Transpec Knorr Disc Brake Axle Parts Catalogue 3/2013 2 LEFT AND RIGHT HANDED CALIPERS
KNORR DISC BRAKE IDENTIFICATION
CALIPER MOUNTING
Axially Mounted Calipers:
Brake Type SB 3745 Caliper bolts are bolted in line with the axle beam.
Tangentially Mounted Calipers:
Brake TypeSB 3745T/4309T Tangential Mounting: Caliper bolts are bolted at an angle to the axle beam.
LEFT AND RIGHT HANDED CALIPERS
Right Hand Caliper = Adjuster screw is on the Left Hand Caliper = Adjuster screw is adjacent to opposite side of the caliper from the fixed guide pin. the fixed guide pin.
BPW Transpec Knorr Disc Brake Axle Parts Catalogue 3/2013 2
Picture 1Left Handed Caliper
Left Hand Caliper = Adjuster screw is adjacent to the fixed guide pin.
Picture 2Right Handed Caliper
Right Hand Caliper = Adjuster screw is on the opposite side of the caliper from
the fixed guide pin.
Please Note:For underslung suspensions the right hand caliper is used on the left hand side of the axle and the left handcaliper is used on the right hand side of the axle. When identifying right or left handed calipers you must knowwhether the suspension is underslung or overslung.
Overslung = suspension springs over axle Underslung = suspension springs under axle
CALIPER TYPES A, B AND CIdentifying features of caliper types A and B: Identifying features of caliper type C:
KNORR DISC BRAKE IDENTIFICATION
IDENTIFYING FEATURES OF CALIPER TYPES A AND B:
Type A - 8mm hex adjustment screw with flat plastic cover.
Type B - 10mm hex sacrificial adjuster screw with domed rubber
cover.
Steel cap with o ring from
mid 2000. Bellow with hose clip up to
mid 2000.
Two part housing
IDENTIFYING FEATURES OF CALIPER TYPE C :
10 mm hex sacrificial adjuster screw with domed rubber
cover
Flat steel cover
One part housing
BPW Transpec Knorr Disc Brake Axle Parts Catalogue 3/2013
Type A – 8mm hex adjustment screw with
flat plastic cover.
Type B – 10mm hex sacrificial adjuster screw with domed
rubber cover.
Steel cap with o ring from mid 2000.
Bellow with hose clip up to mid 2000.
Two part housing.
KNORR DISC BRAKE IDENTIFICATION
IDENTIFYING FEATURES OF CALIPER TYPES A AND B:
Type A - 8mm hex adjustment screw with flat plastic cover.
Type B - 10mm hex sacrificial adjuster screw with domed rubber
cover.
Steel cap with o ring from
mid 2000. Bellow with hose clip up to
mid 2000.
Two part housing
IDENTIFYING FEATURES OF CALIPER TYPE C :
10 mm hex sacrificial adjuster screw with domed rubber
cover
Flat steel cover
One part housing
BPW Transpec Knorr Disc Brake Axle Parts Catalogue 3/2013
10 mm hex sacrificial adjuster screw with domed rubber cover.
One part housing.
Flat steel cover.
***Disc Brake Pads:
• Are not available individually and can only be supplied in a kit which repairs one axle.
• The part number for the individual pads are found on the brake pad backing plate.
• Single disc brake pad part number 05.092.90.22.0 to suit SB3745 and SB3745T can only be supplied in kit part number 09.801.08.15.0.
• Single disc brake pad part number 05.092.90.23.0 to suit SB4309T can only be supplied in kit part number 09.801.08.16.0.
SB3745T / SB4309TRotor diameter Rotor diameter = 377mm = 430mm
Rotor width Rotor width = 45mm = 45mm
Tangentially mounted
KNORR DISC BRAKE COMPONENT CHARTFor more detailed information regarding BPW Knorr Disc Brakes refer to the
BPW Transpec Knorr Disc Brakes Parts catalogue for Australian assembled BPW axles ALWAYS INSIST ON GENUINE BPW SERVICE PARTS
CALIPER IDENTIFICATION INFORMATION SB3745T / SB4309T
CALIPER CARRIER ATTACHING PARTS
Item No Part No Description Dimension Qty Per Axle
310A 0316434020TS Caliper Spacer ** 4
315 0250298720 Bolt (Torque 280-330Nm) M 16x1.5x60 10/4 *
0250298521 Bolt (Torque 280-3300Nm) M 16x1.5x65 10
0250298821 Bolt Steer Axle (Torque 280-330Nm) M 16x1.5x60 4
0250511021 Bolt Steer Axle (Torque 280-330Nm) 2
318 0254011608 Washer Ø 17 10
Washer 10
*10 screws for non-steer axle, 4 screws for steer axle ** Caliper spacer item number 310A used on 10 stud 335 PCD and 8 stud 275 PCD models
* Repair Kits differ in the design of the guide sleeve:
Guide sleeve for Caliper Type A Stop Ring ∅ = 35 mm
Guide sleeve for Caliper Type B & C Stop Ring ∅ = 39 mm
*** Disc Brake Pads:
Are not available individually and can only be supplied in a kit which repairs one axle. The part number for the individual pads are found on the brake pad backing plate. Single disc brake pad part number 0509290050 to suit SB3745 can only be supplied in kit part number 0980107240.
old executions
(Renolit HLT 2)
(Renolit HLT 2)
348
396397
398
390
394
364363
315 318
362
354355
345
373
368370
395
350
346
373
346
348
369
328
335337
326
325
345
336335
325
326328
20 / 21
SB3745
REPLACEMENT CALIPERS
Caliper Item No Caliper Description Caliper carrier Item No
0536270600RAT Rationalised Caliper Right Hand SB3745 0203131300
0536270610RAT Rationalised Caliper Left Hand SB3745 0536270360 Caliper Right Hand SB3745 Monoblock ABS (Complete with carrier) 0536270370 Caliper Left Hand SB3745 Monoblock ABS (Complete with carrier)
Brake Type SB 3745 Caliper bolts are bolted in line with the axle beam.
Axially Mounted Calipers:
Brake TypeSB 3745T/4309T Tangential Mounting: Caliper bolts are bolted at an angle to the axle beam.
Tangentially Mounted Calipers:
Right Hand Caliper = Adjuster screw is on the opposite side of the caliper from the fixed guide pin.
Left Hand Caliper = Adjuster screw is adjacent to the fixed guide pin.
Please Note: For underslung suspensions the right hand caliper is used on the left hand side of the axle and the left hand caliper is used on the right hand side of the axle. When identifying right or left handed calipers you must know whether the suspension is underslung or overslung. Overslung = suspension springs over axle Underslung = suspension springs under axle
LEFT AND RIGHT HANDED CALIPERS
CALIPER MOUNTING
Steel cap with o ring from mid 2000.
Bellow with hose clip up to mid 2000.
Two part housing
Type A - 8mm hex adjustment screw with flat plastic cover.
Type B - 10mm hex sacrificial adjuster screw with domed rubber
cover.
CALIPER TYPES A, B, & C
One part housing
Flat steel cover
10 mm hex sacrificial adjuster screw with domed rubber
cover
IDENTIFYING FEATURES OF CALIPER TYPES A AND B: IDENTIFYING FEATURES OF CALIPER TYPE C :
(Renolit HLT 2)
(Renolit HLT 2)
348
396397
398
390
394
364363
362
354355
345
373
368370
395
350
346
373
328
335
326
325
318315
KDBCC V01-2013
REPLACEMENT CALIPERS
Caliper Item No Caliper Description Caliper carrier Item No
0536270600RAT Rationalised Caliper Right Hand SB3745 033088550
0536270610RAT Rationalised Caliper Left Hand SB3745 0536270600 Caliper Right Hand SB3745T Monoblock (Complete with carrier) 0536270610 Caliper Left Hand SB3745T Monoblock (Complete with carrier) 0536270620RAT Caliper Right Hand SB4309T Monoblock
033088560 0536270630RAT Caliper Left Hand SB4309T Monoblock 0536270620 Caliper Right Hand SB4309T Monoblock (Complete with carrier) 0536270630 Caliper Left Hand SB4309T Monoblock (Complete with carrier)
(Rotor diameter = 370mm)(Rotor diameter = 370mm) (Rotor diameter = 430mm)
Single disc brake pad part number 0509290220 to suit SB3745T can only be supplied in kit part number 0980108150.Single disc brake pad part number 0509290230 to suit SB4309T can only be supplied in kit part number 0980108160.
Axially mountedTangentially mounted
ROTORS
Part No Part No Qty Per Axle
0308834040 Rotor 10 stud 335mm PCD (ABS mounting) 2 0308834060 Rotor 10 stud 335mm PCD 2 0308834070 Rotor 10 stud 285mm PCD 2
0308834150 Rotor 8 stud 275mm PCD 2
0308834160 Rotor 8 stud 275mm PCD (ABS mounting) 2
BRAKE PARTS
Item No Part No Description Qty Per Axle
Kits
0980106310 Guide pins and seal kit suits Caliper type A * See note below (Includes items 325 - 328, 335, 36, 345 - 348, 354, 355, 373) 2
0980106240 Guide pins and seal kit suits Caliper type B * See note below (Includes items 325 - 328, 335, 336, 345 - 348, 354, 355, 373) 2
0980106330 Guide pins and seal kit suits Caliper type C (Includes items 325 - 328, 345 - 348, 350, 352, 373) 2
0980102970 Main pin kit suits Caliper type A and B (Includes items 325 - 328, 335 - 337, 354, 355, 369, 373) 2
0980102630 Thrust pad and boot kit suits Caliper type A and B (Includes items 362 - 364) 2
0980106320 Thrust pad and boot kit suits Caliper type C (Includes items 362 - 364) 2
0980106250 Adjuster adaptor and cap kit (Includes items 368 and 370) ** See note below 2
0980108150 Brake Pad Kit *** See note below (Includes items 368, 369, 370, 390, 394, 396, 397, 398) 1
368 0224001100 Adjuster adaptor suits Caliper type B and C 2
369 0218270400 Cap, adjuster adaptor suits Caliper type A 2
ROTORS Part No Description Dimension Qty Per Axle
mm773 Ø T5473BS DCP mm572 duts 8 rotoR 0614388030 2 mm034 Ø T9034BS DCP mm582 duts 01 rotoR 0605388030 2
m034 Ø T9034BS DCP mm533 duts 01 rotoR 0505388030 m 2
CALIPER CARRIER ATTACHING PARTS
Item No Description SB3745T SB4309T Qty Per
Axle Part No Dimension Part No Dimension
315 Caliper mount bolt 0334012260 M16x1.5x97-12.9 0334012260 M16x1.5x97-12.9 8
318 8 mm71 Ø 8061104520 mm71 Ø 8061104520 rehsaW
BRAKE PARTS
Item No Description SB3745T SB4309T Qty Per
Axle Part No Part No Guide pins and seal kit
0980106330 2
Kits
(Includes items 325 - 355, 373) Guide pins and seals Kit suits caliper item numbers
0980106330KB 2 0536270620RAT and 0536270630RAT (Includes items 325 - 355, 373) Loose bearing ("secondary guide pin") kit
0980106910 2
(Items 345, 346, 348, 350, 373) Thrust pad and boot kit
0980106320 2
(Items 362 - 364, 373) Adjuster adaptor and cap kit * See note below
0980106250 2
(Items 368, 370) Brake Pad Kit Axle Set ** See note below 0980108150 1 (Items 368 - 370, 390, 394, 396 - 398)
368 Adjuster adaptor 0224001100 2
0980108160
SB3745Rotor diameter = 377mm
Rotor width = 45mm
Axially mounted
*Photos above show plate. Could be plastic or steel.