Upload
paddyfritz
View
130
Download
8
Embed Size (px)
Citation preview
Knockdown Shooting BenchConstruction Plans
Page 1
A portable, knockdown shooting bench that is a perfect accessory for shooting at a primitive range. Made from 1
sheet of 3/4” plywood, and can be assembled in seconds as either a right handed or left handed shooters bench.
Knockdown Shooting BenchParts Identification
Page 2
Knockdown Shooting Bench
Page 3
Cut Plan
Assembly Instructions
Ÿ Lay out pattern and cut pieces from sheet of 3/4” plywood as shown above.
Ÿ All slots are 3/4” wide to accommodate 3/4” thick plywood.Ÿ Take care when cutting slots and tabs to insure good, tight fit
during assembly.Ÿ Glue and screw seat cleats to bottom of seat.Ÿ Sand all edges and finish as desired with a coat of paint or
varnish.Ÿ Have fun shooting...
Knockdown Shooting BenchIndividual Part Details
Page 4
A) Back Leg Detail
B) Seat Detail
Page 5
C) Top Detail
D) Front Leg Detail
Knockdown Shooting BenchIndividual Part Details (Cont.)
Page 6
E) Keel Detail
F) Seat Cleets Detail
Knockdown Shooting BenchIndividual Part Details (Cont.)
Page 7
G) Middle Support Detail
Knockdown Shooting BenchIndividual Part Details (Cont.)