Knit your first squares

Step-by-step instructions

Knit a cozy bobble hat

Customize your projects—we show you how!

KNITTING CROCHET CREWELWORK FELTING

Add warmth & softness to

your home

Create a stunning reversible throw square by square

1creative creativeKnit your first squares

KSC_US_NAT_01_P01_COVER.indd 1 28/06/2017 08:28

• SIZE 8 (5mm) knitting needles• 2 balls of Crea yarn to make

your next 2 squares in Grisaille Moss and Provenance Albite

• Learn reverse stockinette stitch• Knit a pillow, headband, toy lamb

and boot cuffs• Customize with buttons• Learn how to block your work

PATCHWORK COLLECTION 1 garter stitch in granite 2 stockinette stitch in moonstone

FASHION PROJECTS 1 bobble hat

ACCESSORIES 1 chic bag

HOME COMFORTS 1 simple ottoman

with the next issue

CUSTOMIZING TECHNIQUES 1 making pom-poms • designer’s notebook: pom-poms • baby’s slippers

KNOW-HOW 1 reading a pattern card 2 knitting basics • slip knot loop • cable cast on • knit stitch • purl stitch • binding off

creative

Knit the first 2 reversible squares for your beautiful

throw


Knit a cute lamb

Customize your projects with buttonsKNITTING CROCHET CREWELWORK FELTING

Extra warmth and style for

your bed


2creative

The next two squares

© Eaglemoss Ltd. 2017 1st Floor, Kensington Village, Avonmore Road,W14 8TS, London, UK. All rights reserved.

Publisher: Maggie CalmelsManaging Editor: Becky DavisDesign Editor: Caroline Grimshaw

YOUR COLLECTION Knit & Stitch Creative Collection is published weekly.

DON’T MISS AN ISSUETo make sure you receive every issue, take out a subscription and get Knit & Stitch Creative Collection delivered direct to your door or place a regular order with your magazine retailer.

SUBSCRIPTIONSWhen you subscribe you will receive exclusive free gifts!To subscribe: Visit our website at knit-and-stitch.comCall our hotline 0344 472 6227Post the subscription form (which you will find inside issues 1, 2 & 3)

BACK ISSUESTo order back issues: Order online at knit-and-stitch.com or call 0344 472 5227

UK CUSTOMER SERVICESCall: 0344 472 5227Email: [email protected]

AustraliaCall: (03) 9872 4000E-mail: [email protected]

New ZealandCall: (09) 308 2871Fax: (09) 302 7661Email: [email protected]

South AfricaCall: (011) 265 4307E-mail: [email protected]

MalaysiaCall: (03) 8020 7112E-mail: [email protected]

SingaporeCall: (65) 6287 7090E-mail: [email protected]

OVERSEAS BACK ISSUESPlace your order with your local magazine retailer.

Picture Credits:Photography: Lizzie OrmeStep-by-step photography: Jessica BiscoeArtwork illustrations: Coral Mula

Creation of throw and cushions: Melanie Porter © Eaglemoss Ltd 2017

knit-and-stitch.com

Yarn care instructions Hand wash only • Do not bleach • Do not iron • Do not tumble dry When washing the finished product follow the manufacturer’s washing instructions found on the yarn bands.

Needles/hooks not suitable for children under 14 years of age.

KSC_US_NAT_01_P02_IFC.indd 1 30/06/2017 08:59

PATCHWORK COLLECTION 1

★

Size: 4¾ x 4¾ in. (12 x 12cm) Knitting needles: size 6 (4mm)Stitch: garter stitch

GRANITE SQUARE

throw I9Knitted in a lovely Crea yarn, Provenance, this first

square for your throw is worked in garter stitch, using granite for a tweed effect. Follow the simple steps overleaf to knit two squares, and then join them to form your first reversible square.

IN GRANITE

garter stitch

KSC_US_NAT_01_P03-04_sq.indd 1 28/06/2017 08:33

PATCHWORK COLLECTION

1 Hold the needle with the stitches in your left hand. Insert the right needle through the first stitch, from front to back.

3 With your forefinger, take the yarn around the right needle, maintaining the yarn’s tension with your right hand.

5 Slide the stitch on the left needle off the needle, keeping the new stitch on the right needle.

2 Take the yarn round the pinkie on your right hand and over your forefinger to maintain the yarn’s tension.

4 Bring the tip of the right needle toward you and through the stitch on the left needle.

6 Repeat steps 1 to 5 to knit all the stitches onto the right needle. Turn the knitting around; take the needle with the stitches in your left hand and continue to knit every row in the same way.

TRY THIS!To knit your garter stitch square, follow the steps here, and go online to watch the video.

GARTER STITCH SQUARE IN GRANITE

See “reading a pattern card” for the list of abbreviations.

TO MAKEUsing size 6 (4mm) needles and Provenance, cast on 21 sts.Work 36 rows in g st (every row k).Bind off.Work another square in the same way.

Note: Each ball of yarn supplied is enough to work 2 whole squares. If you find you work tightly, or loosely, change your needle size—see know-how 1, reading a pattern card, gauge square.

1

★

When you have tacked your squares together, label them I9. You will need this reference when you join your pairs of squares for your throw. Keep the squares safe in your workbasket.

throw I9

JOINING THE SQUARESWhen you have finished knitting your squares, place them with wrong sides together and the edges matching. Pin around the outer edge. Thread your tapestry needle with a length of scrap yarn, in a contrasting color, and work a row of tacking stitches round the outer edge, stitching about one stitch from the edge.

watch the video knit-and-stitch.com



★

Size: 4¾ x 4¾ in. (12 x 12cm) Knitting needles: size 4 (3.5mm)Stitch: stockinette stitch

MOONSTONE SQUARE

throw G9Stockinette stitch, the second stitch in your

stitch library, and Crea Harmony, a smooth yarn, are used to knit the next reversible square for your throw. Just follow the steps overleaf to produce a perfect stockinette stitch fabric.

IN MOONSTONE

stockinette stitch



TRY THIS! To knit your stockinette stitch square, follow the steps here and go online to watch the video.

2

★

Label your squares G9; you will need this reference when you join your pairs of squares for your throw. Keep the squares safe in your workbasket. You can block them with the next 2 squares, following the blocking technique in issue 2, then tack them together.

throw G9

STOCKINETTE STITCH SQUARE IN MOONSTONE See “reading a pattern card” for the list of abbreviations.

TO MAKEUsing size 4 (3.5mm) needles and Harmony, cast on 28 sts.Row 1 (rs): K to end.Row 2: P to end.These 2 rows form st st. Rep them 18 times more. Bind off.Work another square in the same way.

Note: Each ball of yarn supplied is enough to work 2 squares. If you find you work tightly, or loosely, change your needle size—see know-how 1, reading a pattern card, gauge square.


2 Take the yarn around the pinkie on your right hand and over your forefinger to maintain the yarn’s tension. Take the yarn around the right needle, maintaining the tension with your right hand.

3 Bring the tip of the right needle toward you and through the stitch on the left needle. Slide the stitch on the left needle off the needle, keeping the new stitch on the right needle. Repeat to the end of the row.

THE KNIT ROW

1 Hold the needle with the stitches in your left hand. Insert the right needle through the first stitch, from back to front.

2 Use your forefinger to take the yarn around the right needle and down between the needles.

3 Take the tip of the right needle away from you and through the stitch on the left needle. Slide the stitch on the left needle off the needle, keeping the new stitch on the right needle. Repeat to the end of the row.

THE PURL ROW


Bobble hat kitPLUS Pom-pom kit to customize your hat

FASHION PROJECTS 1

★

USE YOUR K

NOW

LEDGE • USE YOUR NEW

STITCH • bobble hatThis easy-to-knit bobble hat is perfect for anyone new to knitting. It’s knitted in garter stitch, with just a few rows of simple shaping at the top. To complete your hat, just pop on a pom-pom!

• 5 x 1 oz. (25g) balls of Crea Provenance in Albite• 1 x 1 oz. (25g) ball of Crea Haptic

in Filament• Pair of size 6 (4mm) knitting needles• Tapestry needle• Pom-pom maker, 3½ in. (9cm)

in diameter, or thin cardboard, pencil, pair of compasses and scissors

• Press fasteners (optional)Go to knit-and-stitch.com to buy Crea yarn. See the information chart for full details of all the Crea yarns.

FREE GIFT WHEN YOU SUBSCRIBE Visit knit-and-stitch.com

MATERIALS

KSC_US_NAT_01_P07-08.indd 1 28/06/2017 08:36

FASHION PROJECTS1

★

Why not mkae your hat interchangeable by sewing one half of the press fastener to the top of the hat, and the other half to the centre of the pom-pom and fix the pom-pom in place. Use different yarn to create adifferent effect.

SIZETo fit average size head. Length 9 in. (23cm), with brim turned back.

GAUGE17 sts and 36 rows = 4 in. (10cm) over g st.

ABBREVIATIONSSee reading a pattern card.

TO MAKE Using size 6 (4mm) needles and Albite, cast on 78 sts.Work in g st (every row k) for 10 in. (25cm).Shape topDec row 1: K1, *k2tog, k5, rep from * to end. 67 sts.Next and every foll alt row: K to end.Dec row 2: K1, *k2tog, k4, rep from * to end. 56 sts.Dec row 3: K1, *k2tog, k3, rep from * to end. 45 sts.Dec row 4: K1, *k2tog, k2, rep from * to end. 34 sts.Dec row 5: K1, *k2tog, k1, rep from * to end. 23 sts.Dec row 6: K1, *k2tog, rep from * to end. 12 sts.Cut yarn, leaving a long end. Thread cut end through rem sts, draw up tightly and secure end.

FINISHINGUse yarn end to join back seam, reversing seam for 2 in. (5cm) for brim. Turn back brim.

Using Crea Haptic and pom-pom maker (or card circles), make a pom-pom (see Customizing Techniques 1, making pom-poms). Sew pom-pom securely to top of hat. Alternatively, secure pom-pom to hat with a press fastener for a quick change—see designer’s tip.

You could make interchangeable pom-poms for your hat! Just sew one half of a press fastener to the top of the hat and the other half to the center of a pom-pom. Use a variety of yarns and colors to create different effects.

You could make interchangeable

designer’s tip

CUSTOMIZE Y

OUR

PR

OJECTS • EMBELLISH WITH STYLE •

See Customizing Techniques 1 for more creative ideas

with pom-poms

KSC_US_NAT_01_P07-08.indd 2 28/06/2017 08:36

ACCESSORIES 1

★ ★chic bagBoth practical and stylish, this textured bag is knitted in a chunky yarn on large needles—just watch it grow! Finished off with a pair of leather handles, it makes the perfect chic accessory.

• 3 x 3½ oz. (100g) balls of Drops Andes in Red

• Pair of size 8 (5mm) and 10½ (7mm) knitting needles

• Cable needle• Tapestry needle• Lining fabric• Sewing needle and matching sewing thread • Pair of leather bag handles,

28 in. (71cm) long• 1 skein of stranded cotton to

match bag handles

MATERIALS

KSC_US_NAT_01_P09-10.indd 1 28/06/2017 08:39

ACCESSORIES1

★ ★

MAKING A MOCK GUSSET With the wrong side facing, form the base of the bag into a rectangle and fold out the corners. Measure 2 in. (5cm) from each point and pin a line across the corner. Backstitch along the line.

SIZE14 x 12 in. (36 x 30cm), excluding handles.

GAUGE1 patt rep (13 sts) = 3⅛ in. (8cm) and 17 rows = 4 in. (10cm).


SPECIAL ABBREVIATIONC4F = sl 2 sts onto cn and leave at front of work, k2, then k sts from cn.

TO MAKE FRONT: Using size 10½ (7mm) needles, cast on 59 sts.Work in patt as foll:Row 1 (rs): P8, k4, *p9, k4, rep from * to last 8 sts, p8.Row 2: (P3, k1) twice, *p4, k1, (p3, k1) twice, rep from * to last 12 sts, p4, (k1, p3) twice.Row 3: (K3, p1) twice, C4F, *(p1, k3) twice, p1, C4F, rep from * to last 8 sts, (p1, k3) twice.Row 4: Rep Row 2.These 4 rows form the patt. Rep them 10 times more, then work Row 1 again.Next row: P to end.Now work rib border.Change to size 8 (5mm) needles.Rib row 1: P1, *k1, p1, rep from * to end.Rib row 2: K1, *p1, k1, rep from * to end.Rep these 2 rows 3 times more. Bind off k-wise.

BACK: Work as given for front.

FINISHINGUsing the knitting as a pattern, measuring from below the ribbed border, cut two rectangles of lining fabric, allowing ⅝ in. (1.5cm) at each side and lower edge for seams, and ⅜ in. (1cm) at top for hem. Join side seams of knitting, then join lower seam.

With the bag inside out, form the base into a rectangle and fold out the corners (see right). Measure 2 in. (5cm) from the point and pin a line across the corner. Backstitch along the line. Turn the bag right side out and push out the base to form a bucket shape. Make the lining in the same way. Trim the seam allowances. Fold ⅜ in. (1cm) at the top to the wrong side and press. With wrong sides together and seams matching, insert the lining into the bag and pin in place along the base of the ribbed border. Slipstitch lining to bag around the top edge.

Position the handles on the ribbed border, 3⅛ in. (8cm) from the side seams. Using the tapestry needle and all 6 strands of stranded cotton, work a row of running stitch round the punched edges, then work a second row filling in the spaces. Securely fasten off the thread on the wrong side.

Choose a patterned fabric for the lining to give your bag added interest. A lightweight cotton is ideal.

Choose a patterned

designer’s tip

Learn how to customize your projects in the Customizing Techniques pages—make this gorgeous pom-pom!

Backstitch along the line.

Learn how to customize

designer’s tip

KSC_US_NAT_01_P09-10.indd 2 28/06/2017 08:39

HOME COMFORTS 1

★ ★

USE YOUR K

NOW


STITCH • simple ottoman• Approximately 64 oz. (1,800g) of

T-shirt Yarn in Light Gray • Pair of size 15 (10mm) knitting

needles• Tapestry needle• 2 cushions, 20 in. (50cm) in

diameter

MATERIALSThis chunky, stylish ottoman is knitted in garter stitch with short rows forming the ball shape. It’s perfect as extra seating or for resting tired feet.

KSC_US_NAT_01_P11-12.indd 1 28/06/2017 10:22

HOME COMFORTS1

★ ★

SIZE10¼ in. (26cm) high x 20 in. (50cm) in diameter.

TENSION8 sts and 16 rows = 4 in. (10cm) over g st (unstretched).


TO MAKEUsing size 15 (10mm) needles cast on 42 sts.Row 1: K to end.Row 2: K28, turn.Row 3: With yarn at back, sl 1 p-wise, k25, turn.Row 4: With yarn at back, sl 1 p-wise, k27, turn.Rows 5 to 15: Rep Rows 3 and 4 five times, then work Row 3 again.Row 16: K to end.Rep these 16 rows 10 times more.Bind off all sts.

FINISHING Join all edges. Using a length of yarn, run a gathering thread through the first stitch on each side of the strip. On the first side, secure one end of the gathering thread, then pull the other end to gather the edge. Finish off the yarn end securely.Insert the cushions, then gather up the other edge in the same way.

When you’re slipping the first stitch on the turning rows, make sure the yarn is at the back of the work and slip the stitch purlwise. Slipping the first stitch after turning the knitting deletes a step and prevents a hole from forming.

When you’re slipping the first stitch on

designer’s tip

KSC_US_NAT_01_P11-12.indd 2 28/06/2017 10:22

On the cardboard, use the compasses to draw a circle the size of the pom-pom. Draw another circle inside it, about

one-third the diameter of the first. Cut both circles to make a card ring. Make a second ring in the same way.

Make a ball of yarn small enough to fit through the center hole. Holding the rings together, wind the yarn evenly

around the ring until the center hole is filled, don’t pull the yarn too tight. Thread the yarn onto a tapestry needle to finish filling the hole.

Push the scissors between the rings and cut through the yarn all the way around. Separate the rings

slightly. Slip a length of yarn between them and tie it tightly.

CUSTOMIZING TECHNIQUES 1

making pom-pomsSoft, fluffy pom-poms are easy to make and fun to use as trim for garments and soft furnishings. • Yarn

• A pair of compasses• Pencil• Thin cardboard• Small sharp scissors• Tapestry needle

Trim the loose ends of the tying threads and trim the ends of the braided cord near the knots. Stitch

the fringe neatly in place, or glue it carefully with small drops of strong fabric glue.

To attach the pom-poms, thread one end of the tying yarn onto a tapestry needle through the braid.

Repeat with the other yarn end, bringing it through near the first. Knot the 2 ends together at the back of the braid.

MAKING A SIMPLE POM-POM

MAKING A POM-POM FRINGE


You can adjust the size of your pom-poms to suit different projects and experiment with different yarns to make dense balls or fluffier, more open pom-poms.

Use your pom-poms singly or as an offbeat alternative to conventional fringes.

Braid together three bunches of yarn and secure each end with a knot. Make as many pom-poms as you

need. Leave the tying threads long for sewing onto the backing braid.

1

1

2

2

3

3

MATERIALS

KSC_US_NAT_01_P13-16.indd 1 27/06/2017 17:47

CUSTOMIZING TECHNIQUES1

designer’s notebook: pom-pomsSoft and cuddly pom-poms provide the essential

fun element on a variety of fashion items—from hats and scarves to sweaters and jackets—and

they’re equally at home on pillows, bags and throws. Use single, medium and large pom-poms, or pairs and clusters of smaller pom-poms to embellish and personalize your projects or ready-made items.

GONK BAG CHARMTurn a simple pom-pom into a cute gonk by adding dangly arms and legs and colorful wobbly eyes.

Customize YOUR THROW...Personalize your stunning throw by adding pom-pom embellishments. Use yarn to match your square, or use a contrasting color or texture. Play around with the size, color and arrangement until you are happy with the display, then attach them to the top square with a few stitches.

FAUX FUR KEYRINGAttach a large faux fur pom-pom to a keyring for the latest fashion statement.

KSC_US_NAT_01_P13-16.indd 2 27/06/2017 17:47

designer’s notebook: pom-pomsCUSTOMIZING TECHNIQUES 1

LONG SCARFGather the ends of a woolly scarf and finish with large faux fur pom-poms.

CUSHION TRIM Attach pairs of pom-poms, in contrasting colors, to the corners of a pillow.

BOBBLE HAT Secure a large fluffy pom-pom to the top of a simple hat to bring it up to date.

KSC_US_NAT_01_P13-16.indd 3 27/06/2017 17:47


• 1 x 3½ oz. (100g) ball of Stylecraft Life DK in each of Cream and Zing

• Pair of size 3 (3.25mm) knitting needles

• Tapestry needle• Pom-pom maker, ¾ in.

(20mm) in diameter, or thin cardboard, pencil, pair of compasses and scissors

SIZE3 in. (7.5cm) long.



TO MAKE PLAIN SLIPPERSUsing size 3 (3.25mm) needles and main color, cast on 31 sts.Work in g st (every row k), shaping as foll:Row 1 (ws): K to end.Row 2: K1, puk, k14, puk, k1, puk, k14, puk, k1. 35 sts.

Row 3: K to end.Row 4: K2, puk, k14, puk, k3, puk, k14, puk, k2. 39 sts.Row 5: K to end.Row 6: K3, puk, k14, puk, k5, puk, k14, puk, k3. 43 sts.Row 7: K to end.Row 8: K4, puk, k14, puk, k7, puk, k14, puk, k4. 47 sts.Rows 9 to 21: K to end.Row 22: K15, (skpo) 4 times, k1, (k2tog) 4 times, k15. 39 sts. Row 23: K to end.Row 24: K15, (skpo) twice, k1, (k2tog) twice, k15. 35 sts.

Bind off, leaving a 10 in. (25cm) yarn tail to join the seams.

FINISHINGJoin back seam, so seam is on the right side. Join cast-on edge for the sole using a flat seam. Using the contrasting color, make a pom-pom for each slipper, then use the yarn tails to sew the pom-poms to the front or back of the slippers.

TO MAKE STRIPED SLIPPERSWork as given for the plain slippers, but work in stripes of 2 rows of the main color and 2 rows of the contrasting color throughout.

Keep little toes cozy with a pair of cute slippers. Knitted in simple garter stitch and trimmed with a small pom-pom, they are so quick and easy to make.

baby’s slippersbaby’s slippers USE YOUR K

NOW


STITCH •

MATERIALS

KSC_US_NAT_01_P13-16.indd 4 27/06/2017 17:47

KNOW-HOW 1

HOME COMFORTS 1

★ ★

USE YOUR KNO

WLE

DGE • USE YOUR NEW STITCH • simple ottoman

• Approximately 64 oz. (1,800g) of

T-shirt Yarn in Light Gray

• Pair of size 15 (10.0mm) knitting

needles• Tapestry needle

• 2 cushions, 20 in. (50cm) in

diameter

MATERIALS

This chunky, stylish ottoman is

knitted in garter stitch with short

rows forming the ball shape. It’s

perfect as extra seating or for

resting tired feet.

ACCESSORIES 1

★ ★chic bagBoth practical and stylish, this textured bag is knitted in a chunky yarn on large needles—just watch it grow! Finished off with a pair of leather handles, it makes the perfect chic accessory.

• 3 x 3½ oz. (100g) balls of Drops Andes in Red

• Pair of size 8 (5mm) and 10½ (7mm) knitting needles

• Cable needle• Tapestry needle• Lining fabric• Sewing needle and matching sewing thread • Pair of leather bag handles,

28 in. (71cm) long• 1 skein of stranded cotton to

match bag handles

MATERIALS

Bobble hat kitPLUS Pom-pom kit to customize your hat

FASHION PROJECTS 1

★

USE YOUR K

NOW


STITCH • bobble hatThis easy-to-knit bobble hat is perfect for anyone new to knitting. It’s knitted in garter stitch, with just a few rows of simple shaping at the top. To complete your hat, just pop on a pom-pom!

• 5 x 1 oz. (25g) balls of Crea Provenance in Albite• 1 x 1 oz. (25g) ball of Crea Haptic

in Filament• Pair of size 6 (4mm) knitting needles• Tapestry needle• Pom-pom maker, 3½ in. (9cm)

in diameter, or thin cardboard, pencil, pair of compasses and scissors

• Press fasteners (optional)Go to knit-and-stitch.com to buy Crea yarn. See the information chart for full details of all the Crea yarns.

FREE GIFT WHEN YOU SUBSCRIBE Visit knit-and-stitch.com

MATERIALS

GUIDE TO PATTERN DIFFICULTY LEVELS Hbeginner

HHeasy

HHHskilled

HHHHexpert

Detailed explanations for the complete novice.

Uses simple stitches, suitable for the less experienced crafter.

Medium level of difficulty, with techniques needing more attention.

Uses complex combinations of stitches and techniques, suitable for more experienced crafters.

Before you begin a design it’s worth learning how to read the pattern card and identifying the main points you’ll find on it. Keep your pattern card at hand as you work, because you will want to refer back to it for all sorts of essential information.

reading a pattern card

STRANDS The projects are arranged under the following six headings: patchwork collection, fashion projects, home comforts, easy does it!, accessories and know-how. The projects are numbered and filed in numerical order.

MATERIALSThe color, quantity and type of yarn needed to complete a project are listed first, followed by the knitting needle or hook sizes. Then, any other materials needed to complete a project.

CRAFT Each craft is identified by a symbol

knitting crochet crewelwork felting

elephant pillowHOME COMFORTS 24

MATERIALS

• 12 in. (30cm) of 54-in. (137cm) wide turquoise fabric

• Crewel wools, one skein in each of cream, deep red,

lilac, purple, mid pink, light pink and lime green

• 18 x lime green, 18 x pink and 30 x gold seed beads

• 3 x cream ⅛ in. (4mm) beads

• Tracing paper and pencil• Transfer pencil• Masking tape• 8 in. (20cm) embroidery hoop

• Crewel needle, size 7

• 24 in. (60cm) of 57-in. (145cm) wide pink patterned

fabric• 76 in. (2m) of turquoise bobble trim

• Matching sewing thread• 24 x 15¾ in. (60 x 40cm) pillow pad

This exotic pillow has a center panel

embroidered with beautifully decorated

elephants. Patterned fabric and jewel-

colored bobble trim is used to complete

the pillow cover.

★ ★

MATERIALSThe type of fabric and wool needed to work a project are listed first, followed by other materials required. Next are shown materials needed to complete a project, if appropriate.

KSC_US_NAT_01_P17-18.indd 1 28/06/2017 09:43

KNOW-HOW1

GAUGE SQUAREBefore you start a knitting or crochet pattern, you should always work a gauge square!

WHY WORK A GAUGE SQUARE? A gauge square is necessary so you can check that the size of needles or hook recommended in a pattern will give you the correct finished size; different people work in different ways and some hold the yarn more tightly or loosely than others—this will have a bearing on the finished size of the work. The gauge gives you the number of stitches and rows you must work, using the recommended yarn and needles or hook, to obtain a 4 in. (10cm) square. If your sample is not 4 in. (10cm) square, your project will be too big or too small if you continue with the needles or hook recommended in the pattern.

HOW DO I WORK A GAUGE SQUARE? Using the stitch indicated, work a square at least 6 in. (15cm) with the size of needles or hook specified, then bind off or fasten off. If the type of yarn permits pressing, press the square carefully. Stretch it very gently widthways if it has been worked in a rib pattern. Using a ruler, measure and count the stitches over 4 in. (10cm) across the width and the rows over 4 in. (10cm) along the length. Compare the results with the figures in the “gauge” section on your pattern.

I HAVE MORE STITCHES AND MORE ROWS This means you are working too tightly. Work another gauge square with larger needles or hook.

I HAVE TOO FEW STITCHES AND ROWS This means you are working too loosely. Work another gauge square with smaller needles or hook.

THE INSTRUCTIONSThe instructions for making an item are always given in the same way. Read them carefully before you start and follow the stages in the order given.

To get used to this type of text, here are the abbreviations you will need to recognize throughout the knit & stitch creative collection. If a pattern requires a special abbreviation, this will appear, in detail, on the pattern card.

alt alternatebeg beginningch chaincm centimeter(s)cn cable needlecont continue or continuing dc double crochetdtr double treble crochetdec decrease or decreasingfoll follows or followingg st garter stitchhdc half double crochetin(s) inch(es)inc increase or increasingk knitk-wise knit-wise

lp(s) loop or loopsm meter(s)mm millimeter(s)p purlp-wise purl-wisepatt patternpuk pick up loop lying

between needles and k into back of it

pup pick up loop lying between needles and p into back of it

psso pass slipped st overrep repeatrs right siderem remain or remaining

rev st st reverse stocking stitchs st seed stitchsc single crochetskpo sl 1, k1, pssosl slipsl st slip stitchst(s) stitch or stitchesst st stockinette stitchtbl through back loop(s) tog togethertr treble crochettrtr triple treble crochetws wrong sideyfd yarn forwardyoh yarn over hook

A LIST OF ABBREVIATIONS FOR YOU TO REFER TO!

FINISHED SIZETo fit a 24 x 15¾ in. (60 x 40cm) pillow pad.

TRANSFERRING THE DESIGN• Cut one 25 x 8¼ in. (63 x 21cm) rectangle of turquoise fabric for the panel. Trace the three elephant templates onto tracing paper with a sharp pencil. Turn the tracing over and redraw the solid lines and dots on the wrong side with a transfer pencil. • Place the large elephant tracing right side up on the panel 3¼ in. (9.5cm) in from the right-hand short edge and 2 in. (5cm) above the long lower edge. Tape in place with masking tape. Press with a medium hot iron to transfer the design. Remove the tracing. • Place the small elephant tracing right side up on the panel with the body 3¼ in. (9.5cm) in from the left-hand short edge and 2 in. (5cm) above the long lower edge. Tape in place with masking tape. Transfer the elephant to the linen as before. • Place the medium elephant tracing right side up on the panel between the small and large elephants and 2 in. (5cm) above the long lower edge. Tape in place. Transfer the elephant to the linen as before.

EMBROIDERING THE DESIGN• Fix the large elephant in an embroidery hoop. Use a crewel embroidery needle and one strand of crewel wool throughout. Refer to your know-how strand to work the embroidery stitches. Work satin stitch

to fill the tusk using cream wool and the eye using deep red wool. Use lilac wool to fill in the ear in brick stitch. Outline the elephant in chain stitch with purple wool. • Fill in the petals with long and short stitch using mid pink wool for the inner sections and light pink wool for the outer sections. Working out from the center, embroider a lazy daisy at the dots between the petals with lime green wool, catching in a pink bead with the anchoring stitch. • Outline the stems in stem stitch using lilac wool, sew a lime green bead at the end of the stems. Use cream wool to embroider a French knot at the dot after the lime green bead. Sew a cream bead at the dot at the center of the petals with the cream wool.• Couch the tail using purple wool for the straight stitches. Use lime green wool for the five anchoring stitches, catching in a gold bead on the last two stitches. Couch the lines on the legs with deep red wool for the straight stitches. Use lime green wool for the five anchoring stitches, catching in a gold bead with each stitch. Remove the embroidery hoop. • Fix the hoop on the medium elephant. Embroider the medium elephant in the same way but use four anchoring stitches with beads on the lines on the legs. Embroider the small elephant but use three anchoring stitches with beads on the lines on the legs. Press the embroidery lightly on the wrong side over a lightly padded surface.

MAKING THE PILLOW FRONT• Cut two 25 x 5½ in. (63 x 14cm) rectangles from patterned fabric for the front panels. With right sides facing, pin and stitch these panels to the long edges of the embroidered panel taking a ⅝ in. (1.5cm) seam allowance. Press the seams toward the patterned panels.• On the embroidered panel, blanket stitch along the seams with lime green wool, making the stitches ⅜ in. (8mm) deep.• Pin bobble trim to one edge of the front, with 1 in. (2.5cm) between the bobbles and the raw edge and the first and last bobble at least 1 in. (2.5cm) inside the corners. Repeat on all edges. Tack the bobble trim in place by machine using a zipper foot to stitch along the center of the braided tape.

MAKING THE PILLOW• Cut two 17 x 15¾ in. (43 x 40cm rectangles of patterned fabric for the backs. Press under ⅜ in. (1cm) then ⅝ in. (1.5cm) on the long edge of each pillow back. Stitch close to the inner pressed edges to hem the backs.• With right sides facing, pin the backs to the front, matching the raw edges and overlapping the hems. Stitch around the outer edge of the pillow taking a ⅝ in. (1.5cm) seam allowance using a zipper foot to allow for the bobbles. Clip the corners, then turn the pillow right side out. Insert the pillow pad into the cover.

HOME COMFORTS24

COLOR KEYcream

deep red

lilac

purple

mid pink

light pink

lime green

Template for small elephant. Enlarge to 114% for medium elephant and 131% for large elephant.

★ ★

ACCESSORIES3

★ ★

SIZETo fit age 3-4[5-6] years. Actual size 16½[17¾] in. (42[45]cm).Length 7½[8⅛] in. (19[20.5]cm).

TENSION22 sts and 30 rows = 4 in. (10cm) over st st.


TO MAKEUsing size 3 (3.25mm) needles and White, cast on 94[102] sts.Rib row 1 (rs): P2, *k2, p2, rep from * to end.Rib row 2: K2, *p2, k2, rep from * to end.Rep these 2 rows 3[4] times more, but dec 1 st at each end of last

row. 92[100] sts.Change to size 6 (4mm) needles.Beg with a k row, cont in st st until work measures 5½[6⅛] in.

(14[15.5]cm) from beg, ending with a p row.Shape topDec row 1: *K21[23], k2tog, rep from * to end. 88[96] sts.Next and every foll alt row: P to end.Dec row 2: *K6, k2tog, rep from * to end. 77[84] sts.Dec row 3: *K5, k2tog, rep from * to end. 66[72] sts.Dec row 4: *K4, k2tog, rep from * to end. 55[60] sts.Dec row 5: *K3, k2tog, rep from * to end. 44[48] sts.Dec row 6: *K2, k2tog, rep from * to end. 33[36] sts.Dec row 7: *K1, k2tog, rep from * to end. 22[24] sts.Dec row 8: *K2tog, rep from * to end. 11[12] sts.Cut yarn, leaving a long tail. Thread cut end through rem sts, draw

up tightly and secure end. Do not cut yarn, but use to join seam.RIGHT EYE: Using size 6 (4mm) needles and Black, cast on 5 sts.Row 1: Inc in first st, k to last st, inc in last st. 7 sts.Row 2: Inc in first st, p to last st, inc in last st. 9 sts.Row 3: K to end.

Row 4: P to end.Row 5: K1, skpo, k to end. 8 sts.Row 6: P to end.

Rows 7 and 8: Rep rows 5 and 6. 7 sts.Rows 9 to 12: Rep rows 3 and 4 twice.Row 13: K1, skpo, k1, k2tog, k1. 5 sts.Row 14: P2tog, p1, p2tog. 3 sts. Bind off.LEFT EYE: Work rows 1 to 4 as for right eye.Row 5: K to last 3 sts, k2tog, k1. 8 sts.Row 6: P to end.

Rows 7 and 8: Rep rows 5 and 6. 7 sts.Complete as right eye from row 9 to end.

WHITES (make 2): Using size 6 (4mm) needles and White, cast on 12 sts.K 2 rows.Dec row: *K2tog, rep from * to end. 6 sts.Cut yarn, leaving a long tail. Thread cut end through rem sts, draw

up tightly and secure end. Bring row ends together to make a circle and join seam.

NOSE: Using size 6 (4mm) needles and Black, cast on 11 sts.Row 1: K to end.Row 2: P to end.Row 3: K1, skpo, k to last 3 sts, k2tog, k1. 9 sts.Row 4: P1, p2tog, p to last 3 sts, p2tog tbl, p1. 7 sts.Row 5: Rep Row 3. 5 sts. Row 6: P2tog, p1, p2tog tbl. 3 sts. Bind off.

POM-POM EARS (make 2): Cut a 39½ in. (1m) length of Black yarn for the mouth, then divide the remaining Black yarn into 2 balls and make 2 pom-poms (see Customizing Techniques 1, making pom-poms), each 2½ in. (6.5cm) in diameter.

FINISHINGUse yarn end to join back seam. Sew whites to eyes, then sew on a button for the pupils. Pin eyes and nose to center front of hat, then sew in place. Using the 39½ in. (1m) length of Black yarn, embroider a mouth. Use a scrap of White yarn to work a long stitch at the top of the nose. Sew a pom-pom at each side of the hat.







HOME COMFORTS24

COLOR KEYcream

deep red

lilac

purple

mid pink

light pink

lime green


★ ★

KEYEach colored square represents the different shades of crewel or tapestry wool used in the design. The color name is shown at the side of the square.

Refer to your know-how strand to work the embroidery stitches. Work satin stitch

lightly on the wrong side over a lightly padded surface.

TEMPLATESThe design is shown as a template to be traced or photocopied.

SIZESFigures in square brackets [ ] refer to the larger sizes; where only one set of figures is given, this applies to all sizes.to all sizes.

ACCESSORIES3

★ ★

SIZETo fit age 3-4[5-6] years. Actual size 16½[17¾] in. (42[45]cm).Length 7½[8⅛] in. (19[20.5]cm).

TENSION22 sts and 30 rows = 4 in. (10cm) over st st.


TO MAKEUsing size 3 (3.25mm) needles and White, cast on 94[102] sts.Rib row 1 (rs): P2, *k2, p2, rep from * to end.Rib row 2: K2, *p2, k2, rep from * to end.Rep these 2 rows 3[4] times more, but dec 1 st at each end of last row. 92[100] sts.Change to size 6 (4mm) needles.Beg with a k row, cont in st st until work measures 5½[6⅛] in. (14[15.5]cm) from beg, ending with a p row.Shape topDec row 1: *K21[23], k2tog, rep from * to end. 88[96] sts.Next and every foll alt row: P to end.Dec row 2: *K6, k2tog, rep from * to end. 77[84] sts.Dec row 3: *K5, k2tog, rep from * to end. 66[72] sts.Dec row 4: *K4, k2tog, rep from * to end. 55[60] sts.Dec row 5: *K3, k2tog, rep from * to end. 44[48] sts.Dec row 6: *K2, k2tog, rep from * to end. 33[36] sts.Dec row 7: *K1, k2tog, rep from * to end. 22[24] sts.Dec row 8: *K2tog, rep from * to end. 11[12] sts.Cut yarn, leaving a long tail. Thread cut end through rem sts, draw up tightly and secure end. Do not cut yarn, but use to join seam.

RIGHT EYE: Using size 6 (4mm) needles and Black, cast on 5 sts.Row 1: Inc in first st, k to last st, inc in last st. 7 sts.Row 2: Inc in first st, p to last st, inc in last st. 9 sts.Row 3: K to end.Row 4: P to end.Row 5: K1, skpo, k to end. 8 sts.Row 6: P to end.Rows 7 and 8: Rep rows 5 and 6. 7 sts.Rows 9 to 12: Rep rows 3 and 4 twice.Row 13: K1, skpo, k1, k2tog, k1. 5 sts.Row 14: P2tog, p1, p2tog. 3 sts. Bind off.

LEFT EYE: Work rows 1 to 4 as for right eye.Row 5: K to last 3 sts, k2tog, k1. 8 sts.Row 6: P to end.Rows 7 and 8: Rep rows 5 and 6. 7 sts.Complete as right eye from row 9 to end.

WHITES (make 2): Using size 6 (4mm) needles and White, cast on 12 sts.K 2 rows.Dec row: *K2tog, rep from * to end. 6 sts.Cut yarn, leaving a long tail. Thread cut end through rem sts, draw up tightly and secure end. Bring row ends together to make a circle and join seam.

NOSE: Using size 6 (4mm) needles and Black, cast on 11 sts.Row 1: K to end.Row 2: P to end.Row 3: K1, skpo, k to last 3 sts, k2tog, k1. 9 sts.Row 4: P1, p2tog, p to last 3 sts, p2tog tbl, p1. 7 sts.Row 5: Rep Row 3. 5 sts. Row 6: P2tog, p1, p2tog tbl. 3 sts. Bind off.

POM-POM EARS (make 2): Cut a 39½ in. (1m) length of Black yarn for the mouth, then divide the remaining Black yarn into 2 balls and make 2 pom-poms (see Customizing Techniques 1, making pom-poms), each 2½ in. (6.5cm) in diameter.

FINISHINGUse yarn end to join back seam. Sew whites to eyes, then sew on a button for the pupils. Pin eyes and nose to center front of hat, then sew in place. Using the 39½ in. (1m) length of Black yarn, embroider a mouth. Use a scrap of White yarn to work a long stitch at the top of the nose. Sew a pom-pom at each side of the hat.

KSC_US_NAT_01_P17-18.indd 2 28/06/2017 10:24

TWO NEEDLE CABLE CAST ON This is an attractive all-purpose cast on with a neat, firm edge. It has a certain amount of “give” but won’t stretch out of shape.

SLIP KNOT LOOP

For a neat edge, keep the cast on gauge relaxed and even. This prevents the cast on edge from becoming too tight, making it easy to knit the first row smoothly.

Place a slip knot loop onto the left needle to create the first stitch. Insert the right needle through this stitch, from front

to back, and take the yarn around the right needle.

Repeat to create as many stitches as you need, keeping the loops as even as possible.

Take the new loop from the right needle and place it on the left needle to make the second stitch.

Bring the yarn through the first stitch so that it forms a loop on the right needle.

Insert the right needle between the two stitches. Wrap the yarn around again, pull the loop through and place it on the

left needle as before.

KNOW-HOW 2

Begin by making a slip knot loop about 4¾ in. (12cm) from the end of the yarn. Place it on one knitting needle—this will count as the first stitch.

By following these simple steps you can learn how to cast on with two needles, work knit and purl stitches, and bind off —the basic techniques you need to start knitting.

knitting basics

5

2 3

4

1

KSC_US_NAT_01_P19-20.indd 1 27/06/2017 17:58

KNIT STITCHBy working every row in knit stitch, you create a garter stitch fabric.

PURL STITCHAlternate rows of knit and purl stitch to create a stocking stitch fabric.

BINDING OFFWhen you bind off, it is important to maintain an even gauge.

Hold the needle with the stitches in your left hand. Insert the right needle into the first stitch, from front to back.

With the yarn in your right hand, use your forefinger to take the yarn around the right needle and up

between the needles.

With the right needle, draw the yarn through the stitch, then slip the stitch off the left needle to

complete the knit stitch. Repeat to the end of the row; turn the knitting ready to work the next row.

Hold the needle with the stitches in your left hand. Insert the right needle into the first stitch, from back to front.

With the yarn in your right hand, use your forefinger to take the yarn around the right needle and down

between the needles.

With the right needle, draw the yarn through the stitch, then slip the stitch off the left needle to

complete the purl stitch. Repeat to the end of the row; turn the knitting ready to work the next row.

Knit the first 2 stitches, then insert the point of the left needle into the first stitch, from left to right.

Use the left needle to lift the first stitch over the second stitch and off the needle to bind off one stitch.

Knit the next stitch, then repeat step 2 to bind off another stitch. Repeat until one stitch remains

on the right needle. Cut the yarn leaving a 4¾ in. (12cm) tail and draw the end through the last stitch. Pull up to secure.

KNOW-HOW2

2

3

2

3

2

3

1 1 1

KSC_US_NAT_01_P19-20.indd 2 27/06/2017 17:58

elephant pillowHOME COMFORTS 24

MATERIALS

• 12 in. (30cm) of 54-in. (137cm) wide turquoise fabric• Crewel wools, one skein in each of cream, deep red,

lilac, purple, mid pink, light pink and lime green • 18 x lime green, 18 x pink and 30 x gold seed beads• 3 x cream ⅛ in. (4mm) beads• Tracing paper and pencil• Transfer pencil• Masking tape• 8 in. (20cm) embroidery hoop• Crewel needle, size 7• 24 in. (60cm) of 57-in. (145cm) wide pink patterned

fabric• 76 in. (2m) of turquoise bobble trim• Matching sewing thread• 24 x 15¾ in. (60 x 40cm) pillow pad

This exotic pillow has a center panel embroidered with beautifully decorated elephants. Patterned fabric and jewel-colored bobble trim is used to complete the pillow cover.

★ ★

KSC_US_NAT_EXTRA_HC_Elephant.indd 1 27/06/2017 18:00







HOME COMFORTS24

COLOR KEYcream

deep red

lilac

purple

mid pink

light pink

lime green


★ ★

KSC_US_NAT_EXTRA_HC_Elephant.indd 2 27/06/2017 18:00


Knit a cute lamb

Customize your projects with buttons


Extra warmth and style for

your bed


2creative


KSC_US_NAT_02_P01_COVER.indd 1 30/06/2017 08:56

• A stylish binder to file your pattern cards• 2 balls of Crea yarn— Harmony

Basalt and Antique Claystone—to make your next 2 squares

• SIZE 4 (3.5mm) knitting needles • Learn 3 x 1 rib and double seed stitch• Knit a triangular wrap, washcloth,

child’s panda hat, and cowl• Customize with tassels• Learn how to increase and decrease

PATCHWORK COLLECTION 3 reverse stockinette

stitch in albite 4 stockinette stitch

in moss

HOME COMFORTS 2 textured pillow

ACCESSORIES 2 alpaca headband

with the next issue

EASY DOES IT! 1 little lamb

CUSTOMIZING TECHNIQUES 2 designer’s notebook: buttons • boot cuffs

KNOW-HOW 3 blocking your work

creative

Knit the next 2 reversible squares for your beautiful

throwfor your beautiful


Child’s cute panda hat

Cozy cowl with tassel customizationKNITTING CROCHET CREWELWORK FELTING

Stylish versatile throw


3creative


with the next issue


Child’s cute panda hat

Cozy cowl with tassel customizationKNITTING CROCHET CREWELWORK FELTING









Stylish Stylish versatile versatile Stylish

versatile Stylish

throw


creativecreativeThe next two squares

© Eaglemoss Ltd. 2017 1st Floor, Kensington Village, Avonmore Road,W14 8TS, London, UK. All rights reserved.

Publisher: Maggie CalmelsManaging Editor: Becky DavisDesign Editor: Caroline Grimshaw

YOUR COLLECTION Knit & Stitch Creative Collection is published weekly.

DON’T MISS AN ISSUETo make sure you receive every issue, take out a subscription and get Knit & Stitch Creative Collection delivered direct to your door or place a regular order with your magazine retailer.

SUBSCRIPTIONSWhen you subscribe you will receive exclusive free gifts!To subscribe: Visit our website at knit-and-stitch.comCall our hotline 0344 472 6227Post the subscription form (which you will find inside issues 1, 2 & 3)

BACK ISSUESTo order back issues: Order online at knit-and-stitch.com or call 0344 472 5227

UK CUSTOMER SERVICESCall: 0344 472 5227Email: [email protected]

AustraliaCall: (03) 9872 4000E-mail: [email protected]

New ZealandCall: (09) 308 2871Fax: (09) 302 7661Email: [email protected]

South AfricaCall: (011) 265 4307E-mail: [email protected]

MalaysiaCall: (03) 8020 7112E-mail: [email protected]

SingaporeCall: (65) 6287 7090E-mail: [email protected]

OVERSEAS BACK ISSUESPlace your order with your local magazine retailer.

Picture Credits:Photography: Lizzie OrmeStep-by-step photography: Jessica BiscoeArtwork illustrations: Coral Mula

Creation of throw and pillows: Melanie Porter © Eaglemoss Ltd 2017

knit-and-stitch.com

Yarn care instructions Hand wash only • Do not bleach • Do not iron • Do not tumble dry When washing the finished product follow the manufactures washing instructions found on the yarn bands.

Needles/hooks not suitable for children under 14 years of age.

KSC_US_NAT_02_P02_IFC.indd 1 27/06/2017 18:32


★

Size: 4¾ x 4¾ in. (12 x 12cm) Knitting needles: size 6 (4mm)Stitch: reverse stockinette stitch

throw F8

reverse stockinette stitchThe next reversible square for your throw is knitted with Crea Provenance yarn in a lovely soft cream, Albite, and reverse stockinette stitch. This is the third stitch in your stitch library.

IN ALBITEALBITE SQUARE

KSC_US_NAT_02_P03-04_PW3.indd 1 27/06/2017 18:36


★

When you have tacked your squares together, label them F8. You’ll need this reference when you join your pairs of squares for your throw. Keep the squares safe in your workbasket.

REVERSE STOCKINETTE STITCH SQUARE IN ALBITE See “reading a pattern card” for the list of abbreviations.

TO MAKEUsing size 6 (4mm) needles and Provenance, cast on 22 sts.Row 1 (rs): P to end.Row 2: K to end.These 2 rows form rev st st.Rep them 15 times more.Bind off.Work another square in the same way.




5 Take the yarn around the right needle, maintaining the tension of the yarn with your right hand.

2 Take the yarn around the pinkie on your right hand and over your forefinger. Use your forefinger to take the yarn around the right needle and down between the needles.



TRY THIS!To knit your reverse stockinette stitch square, follow the steps here and go online to watch the video.

JOINING THE SQUARESBlock your squares, see blocking your work, know-how 3. Then, with wrong sides together and the edges matching, pin around the outer edge. Thread your tapestry needle with a scrap of yarn in a contrasting color and work a row of tacking stitches around the outer edge, stitching about one stitch from the edge.


throw F8



★

Size: 4¾ x 4¾ in. (12 x 12cm) Knitting needles: size 8 (5mm)Stitch: stockinette stitch

throw D10Crea Grisaille, a beautifully soft fashion yarn,

has been used to knit your next reversible square. This is your second square in stockinette stitch, but it looks totally different than your first square, as it has a highly textured finish.

IN MOSS

stockinette stitchMOSS SQUARE



TRY THIS! To knit your stockinette stitch square, follow the steps here and go online to watch the video.

4

★

When you have tacked your squares together, label them D10. You’ll need this reference when you join your pairs of squares for your throw. Keep the squares safe in your workbasket.

throw D10

STOCKINETTE STITCH SQUARE IN MOSS See “reading a pattern card” for the list of abbreviations.

TO MAKEUsing size 8 (5mm) needles and Grisaille, cast on 17 sts.Row 1 (rs): K to end.Row 2: P to end.These 2 rows form st st. Rep them 13 times more. Bind off.Work another square in the same way.



2 Take the yarn around the pinkie on your right hand and over your forefinger. Use your forefinger to take the yarn around the right needle, maintaining the tension with your right hand.



5 Use your forefinger to take the yarn around the right needle and down between the needles.


JOINING THE SQUARESBlock your squares, see blocking your work, know-how 3. Then, with wrong sides together and the edges matching, tack around the outer edge, stitching about one stitch from the edge.



HOME COMFORTS 2

★ ★

USE YOUR K

NOW


STITCH • textured pillowtextured pillow• 7¼ oz. (200g) of Aran Tweed

in blue• Pair of size 8 (5mm) knitting

needles• Tapestry needle• Pillow form, 17¾ x 13¾ in.

(45 x 35cm)

Use the stitches you have learned so far to knit this stunning pillow. Knitted in bands of stockinette stitch and reverse stockinette stitch, with a garter stitch border, it’s worked in one long strip with no shaping!

MATERIALS

KSC_US_NAT_02_P07-08_Cushion.indd 1 27/06/2017 18:40

HOME COMFORTS2

★ ★

SIZETo fit a 17¾ x 13¾ in. (45 x 35cm) pillow form.

GAUGE17 sts and 24 rows = 4 in. (10cm) over patt, with patt opened out.


TO MAKEUsing size 8 (5mm) needles, cast on 74 sts.K 9 rows for border.Now work in patt as foll:Rows 1 to 8: Beg with a k row, work 8 rows st st.Rows 9 to 16: Beg with a p row, work 8 rows rev st st.

These 16 rows form the patt.Rep them 9 times more.Beg with a k row, work 8 rows st st.Beg with a p row, work 7 rows rev st st.Bind off.

FINISHING Block knitting (see Know-How 3). Place knitting, with right side facing, on a flat surface and fold top (cast-on edge) down, then fold bottom up, overlapping border with last half pattern—the pattern should match at side seams. Pin side edges, then join side seams, working through all three layers at the overlap. Turn cover through to right side and insert pillow form. Work a row of running stitch just above the cast-on edge to join the border to the pillow cover.

The knitted fabric will concertina slightly, so measure it with the fabric opened out. Wrap the knitting around your pillow form, to ensure a good fit, before binding off.

The knitted fabric will

expert’s tip

CUSTOMIZE Y

OUR

PR

OJECTS • EMBELLISH WITH STYLE •

Customize your pillow by adding a row of matching chunky buttons to the garter stitch border. A row of mismatched buttons would look good too!

Customize your pillow by

designer’s tip

See Customizing Techniques 2 for more creative ideas

with buttons

KSC_US_NAT_02_P07-08_Cushion.indd 2 27/06/2017 18:40

ACCESSORIES 2

★alpaca headbandA cozy headband knitted in a combination of beautifully soft alpaca yarn and a textured rib stitch. With a simple twist at the center front, it’s a chic update on a classic design.

• 2 x 2 oz. (50g) balls of Sublime Superfine Aplaca DK in Caille

• Pair of size 7 (4.5mm) knitting needles

• Tapestry needle

MATERIALS

KSC_US_NAT_02_P09-10_Headband.indd 1 27/06/2017 18:42

ACCESSORIES2

★

SIZE20 in. (50cm) in circumference x 4⅜ in. (11cm) wide.

GAUGE22 sts and 32 rows = 4 in. (10cm) over rib patt, using 2 strands of yarn held together.


NOTE2 strands of yarn are used together throughout—see expert’s tip.

TO MAKE Using size 7 (4.5mm) needles and 2 strands of yarn held together, cast on 25 sts.Rows 1 and 2: K to end.Row 3 (rs): K2, *p1, k1, rep from * to last st, k1.Row 4: K3, *p1, k1, rep from * to last 2 sts, k2.These 4 rows form the patt. Rep them 14 times more, then work Rows 1 and 2 again.Divide for twistNext row: K2, p1, (k1, p1) 4 times, k1, puk, turn and leave rem sts on a holder.Work on first set of 13 sts as foll:Next row: K3, p1, (k1, p1) 3 times, k3.Rep patt rows 1 to 4 eight times, ending with a ws row. Cut yarn and leave sts on a holder.With rs facing, join yarn to sts on first holder; k2, p1, (k1, p1) 4 times, k2.Next row: K3, p1, (k1, p1) 3 times, k3.Rep patt rows 1 to 4 eight times, ending with a ws row.Next row: K12, take sts on holder behind sts on needle and k next st tog with first st on holder, crossing the groups of sts, k sts from holder. 25 sts.Next row: K to end.Next row: K2, *p1, k1, rep from * to last st, k1.Next row: K3, *p1, k1, rep from * to last 2 sts, k2.Now rep the 4 patt rows 15 times. Bind off.

FINISHINGJoin cast-on and bind-off edges.

Two strands of yarn are used together. To obtain an even finish, wind the two balls of yarn together before you start. Take

the end from each ball and wind them

together into one large ball.

Two strands of yarn are used

expert’s tip

together before you start. Take

ball and wind them together into one

large ball.

KSC_US_NAT_02_P09-10_Headband.indd 2 27/06/2017 18:42

EASY DOES IT! 1

★little lambGarter stitch, worked in a chunky yarn, is used to knit this adorable little lamb. The main part is worked in one piece with simple shaping forming the legs and head.

• 1 x 8⅞ oz. (250g) hank of Cascade Magnum in Ecru

• Scrap of DK yarn in black for features• Pair of size 10½ (6.5mm) knitting needles• Tapestry needle• Polyester toy filling

MATERIALS

little lamb USE YOUR K

NOW

LEDGE • USE YOUR STITCH LIBRARY •

KSC_US_NAT_02_P11-12_Lamb.indd 1 28/06/2017 08:06

EASY DOES IT!1

★

SIZEApproximately 9½ in. (24cm) long (excluding tail) x 7 in. (18cm) high.



TO MAKEBODY: Using size 10½ (6.5mm) needles, cast on 38 sts for the back end and back legs.Working in g st throughout, k 10 rows.Next row: Bind off 9 sts, k until there are 20 sts on right needle, bind off 9 sts. Cut yarn and fasten off.Rejoin yarn to rem 20 sts and k 11 rows.Cast on 9 sts at beg of next 2 rows for front legs. 38 sts.K 8 rows.Now bind off 9 sts at beg of next 2 rows. 20 sts.Next row: K10, inc in next st, k9. 21 sts.Shape for headRows 1 and 2: K1, k2tog tbl, k6, inc in next st, k1, inc in next st, k6, k2tog, k1. 21 sts.Row 3: K1, k2tog tbl, k7, inc in next st, k7, k2tog, k1. 20 sts.Row 4: K1, k2tog tbl, k5, inc in next st, k2, inc in next st, k5, k2tog, k1. 20 sts.Rows 5 to 8: K to end.Row 9: K1, inc in next st, k16, inc in next st, k1. 22 sts.Rows 10 to 13: K to end.Row 14: (K2tog) 11 times. 11 sts.Row 15: K to end.Row 16: K1, (k2tog) 5 times. 6 sts.

Row 17: (K2tog) 3 times. 3 sts.Cut yarn, leaving a long tail. Thread cut end through rem sts, draw up tightly and secure end.

GUSSET: Using size 10½ (6.5mm) needles, cast on 13 sts.Row 1: K to end.Row 2: Inc in first st, k11, inc in last st. 15 sts.Row 3: K to end.Row 4: K2tog tbl, k11, k2tog. 13 sts.Row 5: K to end. Bind off.

TAIL: Join yarn and pick up and k 6 sts from center of cast-on edge of body.K 5 rows.Next row: K2, k2tog, k2. 5 sts.K 7 rows.Cut yarn leaving a long tail; thread cut end through rem sts, draw up tightly and secure the end.

EARS (make 2): Using size 10½ (6.5mm) needles, cast on 4 sts.K 3 rows. Bind off.

FINISHINGFold each leg in half and join the seam. Fold tail and head in half and join the seams, leaving the body open. Attach ears to head. Pin gusset to underside of body; start with one point between the front legs and stretch it back to fit the second point between the back legs; join seams, leaving an opening for filling. Insert the filling, then slipstitch the opening closed.Using black yarn, embroider the eyes and nose on the head, referring to the photographs.

Make sure the toy filling goes right to the end of the tail and legs. Don’t overfill; keep the lamb soft and cuddly.

Make sure the toy filling goes

designer’s tip

KSC_US_NAT_02_P11-12_Lamb.indd 2 28/06/2017 08:06

1 Secure a length of yarn or thread to the wrong side of the fabric in the position

you want the button and using a small stitch. Bring the needle up through one hole as shown.

2 Take the needle down through the hole diagonally opposite to

form the first half of the cross. 3 Bring the needle up

through the hole below as shown, then down

through the hole diagonally opposite to complete the cross. Work another cross, then work a few stitches on the wrong side to fasten off the yarn or thread.

CUSTOMIZING TECHNIQUES 2

designer’s notebook: buttonsButtons can be used as a simple fastening or as a decorative feature. Here, we show how to attach a four-hole button with a cross.

MAKING A CROSS OVER FOUR HOLESAny size button with four holes can be secured with a simple cross.

Buttons are most commonly used as fastenings, but they can also be used to add decorative finishes to garments,

accessories and soft furnishings.

Choose from the wide variety of colors and styles available to add a personal touch to your projects or ready-made items. Remember to make sure your buttons are washable; if not, they will have to be removed before washing.

CUSTOMIZE YOUR THROW...You can add a single button or clusters of buttons to your beautiful throw to add a personal touch. Choose buttons in different sizes, colors and finishes and sew them to a few of your squares.

To sew on a button with two holes, secure the yarn on the wrong side; bring the needle to the front through one hole and take it through the other hole to the back. Do this a couple of times, then secure the yarn on the wrong side.

To sew on a button

expert’s tip


KSC_US_NAT_02_P13-14_embellish.indd 1 28/06/2017 08:16


Add extra warmth with a pair of snugly boot cuffs.

boot cuffs

SIZE11 in. (28cm) in circumference x 6½ in. (16.5cm) long.

GAUGE20 sts and 40 rows = 4 in. (10cm) over s st.


TO MAKE (make 2)Using size 3 (3mm) needles and Moonstone, cast on 57 sts.Rib row 1 (rs): K1, *p1, k1, rep from * to end.Rib row 2: P1, *k1, p1, rep from * to end.Rep these 2 rows twice more.Change to size 4 (3.5mm) needles. K 3 rows.

M st row: K1, *p1, k1, rep from * to end.Rep this row until work measures 5 in. (13cm) from beg, ending with ws facing.K 3 rows.Change to size 3 (3mm) needles. Beg rib row 2, work 7 rows in rib, ending with rib row 2.Cut off Moonstone and join Magma.Change to size 4 (3.5mm) needles. K 6 rows.Bind off to form the decorative edge:Bind-off row: Bind off 3 sts, *with yarn at back, sl next st p-wise, k into st below sl st but on last row in Moonstone, then sl first 2 sts on right needle onto left needle, k2tog, then lift 2nd st on right needle over first st and off needle to bind off 1 st; bind off next 5 sts, rep from * to end, finishing last rep bind off 4 sts.

FINISHING Join seam. With seam at center back, sew a button to the front about 1⅛ in. (3cm) from the left fold and within the top ribbing. Sew a button to the other boot cuff in the same way, but sew it about 1⅛ in. (3cm) from the right fold.

• 2 x 1 oz (25g) balls of Crea Harmony in Moonstone

• 1 x 1 oz (25g) ball of Crea Harmony in Magma

• Pair of size 3 (3mm) and size 4 (3.5mm) knitting needles

• Tapestry needle• 2 buttons, ⅝ in. (1.5cm) in diameterGo to knit-and-stitch.com to buy Crea yarn. See the information chart for full details of all the Crea yarns.

MATERIALS

SCARF TRIMHere, buttons complement the graphic design on a long scarf.

BUTTONED BRACELETTwist a strip of knitted cord into a chic bracelet and fasten it with a large, statement button.

PILLOW MOTIFA heart shape design filled with a selection of creamy buttons adds interest to a plain pillow.

BONUS PATTERNvisit knit-and-stitch.com

KSC_US_NAT_02_P13-14_embellish.indd 2 28/06/2017 08:16

KNOW-HOW 3

Blocking describes the method of stretching, shaping and molding a finished piece of knitting (or crochet) using heat, water or steam.

blocking your work

WHY BLOCK FABRICS?Blocking has many benefits and is an essential step that is sometimes overlooked. Blocking can:• Give your work a much neater and more

professional finish as it relaxes the fibers and evens out your stitches.

• Increase the size of your work to the correct measurements (but it cannot make your work smaller).

• Mold your designs to a specific shape.• “Open up” lacy designs to emphasize the stitches

and patterns.• Help curled edges lay flat.• Improve the overall drape of your fabric.

You could make a blocking board by placing a thick piece of padding onto a rectangular board. Cover the board and padding with a piece of checked fabric, such as gingham. Secure the fabric to the back of the board using a staple gun, tape or Velcro™, but make sure that you don’t overstretch the fabric and distort the checks as you will use these to line up your work when blocking.

You could make a blocking

expert’s tip

staple gun, tape or Velcro™, but make sure that you don’t staple gun, tape or Velcro™, but make sure that you don’t staple gun, tape or Velcro™, but

overstretch the fabric make sure that you don’t overstretch the fabric make sure that you don’t

and distort the checks as you will use these to line

make sure that you don’t overstretch the fabric make sure that you don’t overstretch the fabric make sure that you don’t

checks as you will use these to line

TOOLS AND EQUIPMENT• Rustproof pins with glass heads (plastic heads can melt if

using the steam method of blocking) or blocking pins• Blocking wires (optional). These can be inserted along the

edges of your work to keep them straight• Tape measure• Spray bottle filled with cold water, or steam iron (or a

handheld steamer), or basin filled with cold water• Towel• A flat, padded surface that is large enough to hold your

fabric. This could be a purpose-made folding blocking board, interlocking foam pieces, an ironing board, or even a carpet covered with plastic and a towel


KSC_US_NAT_02_P15-16_Blocking.indd 1 28/06/2017 08:18

KNOW-HOW3

blocking methodsThere are three main methods of blocking:

SPRAY BLOCKINGSuitable for delicate and man-made fibers.

1 Using rustproof glass-headed pins or blocking pins, pin your dry pieces onto your blocking board to the dimensions specified in the pattern. Gently ease the fabric into place, making sure you do not distort the stitches and that edges are straight or curved, as required. 2 Spray your work with cold water until it is damp but not saturated. Press gently with your hands to even out the fabric, then let it dry completely before removing the pins. 3 If the desired result is not achieved, repeat this process.

STEAM BLOCKINGSuitable for some wool fibers and cottons.

1 With the wrong side facing, pin your pieces as for spray blocking.2 Using a hot iron or steamer, hold the iron or steamer close to the fabric and steam until it is damp. DO NOT place the iron or steamer directly onto the fabric because you will scorch the fibers and ruin your work.3 If you need to press your work, place a clean colorfast cloth or towel over your fabric and press lightly at the temperature recommended on the yarn label.4 Once your work is completely dry, remove the pins.

WET BLOCKINGSuitable for most wools, silk and other natural fibers.

1 Fill a basin with cold or lukewarm water (check the yarn label for temperature instructions).2 Immerse your fabric into the water to wet it.3 Lift the fabric out of the water and very carefully squeeze out the excess water. DO NOT lift the whole piece out of the water when soaking wet as your work will stretch. DO NOT wring or you will damage your fabric.4 Carefully place your fabric on a towel and smooth it flat. Starting at one end, loosely roll up the towel while applying a little pressure to squeeze out the excess water.5 Unroll the towel, then place your fabric onto a blocking board and pin into shape according to your pattern instructions using rust-proof pins or blocking pins.6 Let dry completely before removing the pins.

KSC_US_NAT_02_P15-16_Blocking.indd 2 28/06/2017 08:18

TO MAKEUsing size 4 (3.5mm) double pointed needles, cast on 4 sts.K 1 row. Do not turn the work, but slide the sts to the right-hand end of the needle.Take the yarn across the back of the knitting and k 1 row. Cont in this way, working every row k and sliding the sts to the right-hand end of the needle at the end of each row, until your knitting measures 20 in. (50cm). Bind off.

FINISHINGJoin the cast-on and bind-off edges together to form a circle. Hold the sides of the circle together, positioning the join 2 in. (5cm) from one end. Form a 2 in. (5cm) loop at each end and secure with a few small stitches. Wrap a length of yarn around the base of the loop with the seam to cover the join. Sew a button to the join on the loop at the other end. Thread the loop with the binding through the loop by the button, from back to front, and use it to fasten the button.

buttoned braceletMade from a narrow knitted cord and fastened with a large statement button, this bracelet is the perfect chic accessory.

creative

BONUS PATTERN

• Approximately ¾ oz (20g) of double knitting yarn in mink

• Two size 4 (3.5mm) double-pointed knitting needles

• Button, 1½ in. (3.8cm) in diameter

• Tapestry needle

MATERIALS

© Eaglemoss Ltd. 2017.

KSC_US_NAT_02_bonus_button.indd 1 27/06/2017 18:24

Documents

Knit your first squares