Embed Size (px)
Citation preview
Environment Management
Kawasan Pergudangan dan Industri Mutiara Kosambi I Blok A9/25-26Jl.Perancis-Tangerang 15211
Phone: (021) 55958916 (hunting) Fax: (021) 55958918Email: [email protected] Website: www.blueandsky.com
SINCE 1999About Us
PT.CIPTA MEDYA FILTER was established in 1999. We dedicate our experiences to air filter industry and always maintain our services to customers.
We place our best engineering team which is supported by experienced technical crew. We commit to increase our services value and assure the exactly match to customer’s unique requirement, because we identify the problems and provide conclusions with best performance and efficiency result.
Finally, as part of global spirit to bequeath clean air to future generations and living organism over the earth, it is our duty to maintain the harmony of our fresh environment.
Regards,
Alex WijayaDirector
Go green!!
Save Our Earth and
Our Generations
Blue&Sky and BlueGreen are insightful environment products which dedicate our missions in maintaining fresh air to preserve our universe which we bequeath to our future generations and all living organism.
Flow Of Product
Blue&Sky
FILTRATION MANUFACTURING
ENGINEERING
GENERAL TRADING
MECHANICAL REPAIRING &
MAINTENANCE SERVICES
DUST COLLECTOR
MAKER
FILTER PRESS CLOTH
FILTERCAGE
FILTERBAG
Filter Bag
Our Special Materials :
META ARAMID :is used for industry which has high temperature productions process.Thickness : 2.0 - 2.2 mmMaximum temperatures : 180º - 230 ºCWeight : 500 - 600 grm/M²
HOMOPOLYMER ACRYLIC :is used for industry which has fragile productions process to humidity and chemical Thickness : 2.0 – 2.2mmMaximum temperatures : 125º - 140º CWeight : 550 - 600 grm/M²
Polyester : is used for other industries than above.Thickness : 1.2 – 2.5mmMaximum temperatures : 150º CWeight : 400 - 600 grm/M²
We provide air filter bag need in Indonesia industry for more than 10 years. Our products have high end performance and durability according to customer’s requirement and needs. Certainly, we will always innovate our services to latest technology of design, system, and materials.
Production facility 1000 – 1500 Each/day
Filter Cage
Our Special Materials :Galvanized : Lifetime 5 – 7 YearsStainless Steel: Lifetime above 10 Years
Standard size of filter cage1) Ø 115 mm x 2000 - 3500 mm2) Ø 120 mm x 2000 - 3600 mm3) Ø 130 mm x 2000 - 4000 mm4) Ø 143 mm x 2500 - 4500 mm5) Ø 153 mm x 2500 - 6000 mm
Our cage is produced using modern technology with high quality of machineries and experienced technicians. The joint rings, trunk-wire, venture, and other accessories are assembled primly to minimize frictions between cage and bag filter
Filter cage production facility
Approximum 500 Ea/day
Filter Cloth Air Slide CanvasRotary valve
Diaphragm ValveMembrane Kit Rotary valve
Venturi Noozle
Selenoid Control Valve & Instrument
To fulfill demand of our customer which has variety product and process, we also provide diverse spare part and accessories of dust collector to exactly match to unique machine.
Dust Collector
Five principal types of industrial dust collectors are:
1. Inertial separators 2. Fabric filters 3. Wet scrubbers 4. Electrostatic precipitators 5. Unit collectors
A dust collector is a system used to enhance the quality of air released from industrial and commercial processes by collecting dust and other impurities from air or gas. Designed to handle high-volume dust loads, a dust collector system consists of a blower, dust filter, a filter-cleaning system, and a dust receptacle or dust removal system. It is distinguished from air cleaners, which use disposable filters to remove dust.
WORKSHOP FACILITY
MECHANICAL SYSTEMS
FILTERING SYSTEMS
ELECTRICAL SYSTEMS
WET SYSTEMS
1. SETTLING CHAMBER2. CYCLONE
1. ESP2. WET ESP 1. VENTURY WASHER
2. WET SCRUBBER
CLEANED FILTERS STORAGE FILTERS
SHAKER FILTER REVERSE AIR FILTER JET FILTER
Dust Collector
We not only produce but we also provide full line of services and maintenance for your dust collector, bag house or cartridge collectors including remove and replace the existing elements under a scheduled or emergency shutdown. Our crews are seasoned dust collector specialist that know and understand the importance of removing and replacing filter elements safely, properly, and in a timely.
Our engineers ready to assist you in examining the condition and performance of your current Dust Collectors unit and prepare the necessary modification which will be delivered accordingly and efficiently to the requirement
Maintenance Team Team Coordinator
Team Staff
Dustcollector For Tobacco Industry
120.000 m³/hr for Lead smelter
After Sell Servise
1. Holcim Indonesia, PT2. Lafarge Cement Indonesia, PT3. Gajah Tunggal, PT4. Indocement Tunggal Prakarsa, PT5. Semen Padang, PT6. Semen Gresik, PT7. Semen Tonasa, PT8. Semen Kupang, PT9. Sinar Antjol, PT10. Jui shin Cement Indonesia,PT11.Tifico Group, PT12. Indofood Group, PT13. Wings Food Group, PT14. Nojorono Tobacco, PT15. Tambang Timah, PT16. Aneka Tambang, PT17. SGS – Playwood, PT
OUR TOP Customers
PT. CIPTA MEDYA FILTERSpecialist in producing filter bag, filter cage and dust collector’s accessories
Address :Komplek Pergudangan dan Industri Mutiara Kosambi I blok A9 No. 25-26
Jl . Perancis - Desa Dadap, Tangerang Banten 15211
Telp. : 021-55958916; Fax. : 021-55958918Website: www.blueandsky.com - Email : [email protected]
PT. CIPTA MEDYA ENGINEERINGSpecialist in designing and producing dust collector including modification
and maintenance services.
Address :Jl. Salembaran Raya No. 1 Desa Cengklong – Kosambi Timur
Tangerang – Banten 15212
Telp. : 021-29031123 - 29031124 Fax. : 021-29031151Website : www.blueandsky.com - Email : [email protected]
Contact Us
BLUEGREENEnvironment Management
