191
Owner's Manual

Karl, v.11 (rev 3), en-GB - Opel

  • Upload
    others

  • View
    3

  • Download
    0

Embed Size (px)

Citation preview

Owner's Manual

Introduction .................................... 2In brief ............................................ 6Keys, doors and windows ............ 20Seats, restraints ........................... 34Storage ........................................ 52Instruments and controls ............. 59Lighting ........................................ 90Climate control ............................. 96Driving and operating ................. 104Vehicle care ............................... 126Service and maintenance .......... 164Technical data ........................... 167Customer information ................ 175Index .......................................... 184

Contents

2 Introduction

Introduction

Introduction 3

Vehicle specific dataPlease enter your vehicle's data onthe previous page to keep it easilyaccessible. This information isavailable in the sections "Service andmaintenance" and "Technical data"as well as on the identification plate.

IntroductionYour vehicle is a designedcombination of advanced technology,safety, environmental friendlinessand economy.This Owner's Manual provides youwith all the necessary information toenable you to drive your vehiclesafely and efficiently.Make sure your passengers areaware of the possible risk of accidentand injury which may result fromimproper use of the vehicle.You must always comply with thespecific laws and regulations of thecountry that you are in. These lawsmay differ from the information in thisOwner's Manual.Disregarding the description given inthis manual may affect your warranty.

When this Owner's Manual refers to aworkshop visit, we recommend yourOpel Service Partner.For gas vehicles we recommend anOpel Repairer authorised forservicing gas vehicles.All Opel Service Partners providefirst-class service at reasonableprices. Experienced mechanicstrained by Opel work according tospecific Opel instructions.All Opel Dealers provide first-classservice at reasonable prices.Experienced mechanics trained byOpel work according to specific Opelinstructions.The customer literature pack shouldalways be kept ready to hand in thevehicle.

Using this manual● This manual describes all options

and features available for thismodel. Certain descriptions,including those for display andmenu functions, may not apply toyour vehicle due to model

variant, country specifications,special equipment oraccessories.

● The "In brief" section will give youan initial overview.

● The table of contents at thebeginning of this manual andwithin each section shows wherethe information is located.

● The index will enable you tosearch for specific information.

● This Owner's Manual depicts left-hand drive vehicles. Operation issimilar for right-hand drivevehicles.

● The Owner's Manual uses theengine identifier code. Thecorresponding sales designationcan be found in the section"Technical data".

● Directional data, e.g. left or right,or front or back, always relate tothe direction of travel.

● Displays may not support yourspecific language.

● Display messages and interiorlabelling are written in boldletters.

4 Introduction

Danger, Warnings andCautions

9 Danger

Text marked 9 Danger providesinformation on risk of fatal injury.Disregarding this information mayendanger life.

9 Warning

Text marked 9 Warning providesinformation on risk of accident orinjury. Disregarding thisinformation may lead to injury.

Caution

Text marked Caution providesinformation on possible damage tothe vehicle. Disregarding thisinformation may lead to vehicledamage.

SymbolsPage references are indicated with 3.3 means "see page".Page references and index entriesrefer to the indented headings givenin the section table of content.Chronological order to select menuentries in the vehicle personalisationis indicated with I.We wish you many hours ofpleasurable driving.Your Opel Team

Introduction 5

6 In brief

In brief

Initial drive information

Vehicle unlocking

Press c to unlock the doors and loadcompartment.Manual door locksTo unlock the front doors or thetailgate, turn the key in the lock anti-clockwise. To unlock a rear door, pullthe interior lock button on therespective door.Open the doors by pulling thehandles.

To open the tailgate, push the switchon the underside of the brand emblemand lift up slightly.Radio remote control 3 21.Central locking system 3 22.Front doors 3 25.Load compartment 3 25.

In brief 7

Seat adjustmentLongitudinal adjustment

Pull handle, slide seat, releasehandle. Try to move the seat back andforth to ensure that the seat is lockedin place.Seat position 3 35.Seat adjustment 3 36.

Backrest inclination

Pull lever, adjust inclination andrelease lever. Allow the seat toengage audibly.Seat position 3 35.Seat adjustment 3 36.

Seat height

Lever pumping motionup : seat higherdown : seat lower

Seat position 3 35.Seat adjustment 3 36.

8 In brief

Head restraint adjustment

Press release button, adjust heightand engage.Head restraints 3 34.

Seat belt

Pull out the seat belt and fasten in beltbuckle. The seat belt must not betwisted and must fit close against thebody. The backrest must not be tiltedback too far (maximum approx. 25 °).To unfasten belt, press red button onbelt buckle.Seat position 3 35.Seat belts 3 38.Airbag system 3 40.

Mirror adjustmentInterior mirror

To adjust the mirror, move the mirrorhousing in the desired direction.Manual anti-dazzle interior mirror3 29.

In brief 9

Exterior mirrors

Manual adjustment

Swivel lever in required direction.Exterior mirrors 3 28.Manual adjustment 3 28.

Electric adjustment

Select the relevant exterior mirror andadjust it.Electric adjustment 3 28.Folding exterior mirrors 3 28.Heated exterior mirrors 3 29.

Steering wheel adjustment

Unlock the lever, adjust the steeringwheel, then engage the lever andensure it is fully locked.Do not adjust the steering wheelunless the vehicle is stationary andthe steering wheel lock has beenreleased.Airbag system 3 40.Ignition positions 3 105.

10 In brief

Instrument panel overview

In brief 11

1 Central locking system .......... 22Power windows ..................... 30

2 Exterior mirrors ..................... 283 Cruise control ..................... 117

Speed limiter ...................... 118Heated steering wheel .......... 60

4 Turn lights, headlightflash, low beam and highbeam ..................................... 92

Exit lighting ........................... 94

Parking lights ........................ 935 Side air vents ...................... 1026 Instruments .......................... 647 Driver Information Centre ...... 758 Steering wheel controls ....... 609 Windscreen wiper,

windscreen washersystem, rear windowwiper, rear window washersystem ................................... 61

10 Centre air vents .................. 10211 Hazard warning flashers ...... 9112 Info Display ........................... 80

13 Anti-theft alarm systemstatus LED ........................... 27

14 Infotainment system15 Glovebox .............................. 5216 Climate control system .......... 9617 AUX input, USB input18 Selector lever ..................... 11119 Seat heating .......................... 3720 Parking brake ...................... 11321 Ignition switch with

steering wheel lock ............ 10522 Horn ..................................... 61

Driver airbag ........................ 4323 Bonnet release lever .......... 12824 Steering wheel adjustment . . 6025 Fuse box ............................ 14326 Traction Control system ..... 114

City mode ............................ 115Stop-start system ................ 107Lane departure warning ..... 121Electronic Stability Control . 115

27 Light switch .......................... 90

Headlight rangeadjustment ........................... 91Front fog light ........................ 92Rear fog light ........................ 92

Brightness of instrumentpanel illumination .................. 93

12 In brief

In brief 13

1 Central locking system .......... 22Power windows ..................... 30

2 Exterior mirrors ..................... 283 Cruise control ..................... 117

Speed limiter ...................... 118Heated steering wheel .......... 60

4 Turn lights, headlightflash, low beam and highbeam ..................................... 92

Exit lighting ........................... 94

Parking lights ........................ 935 Side air vents ...................... 1026 Instruments .......................... 647 Driver Information Centre ...... 758 Steering wheel controls ....... 609 Windscreen wiper,

windscreen washersystem, rear windowwiper, rear window washersystem ................................... 61

10 Centre air vents .................. 10211 Hazard warning flashers ...... 9112 Info Display ........................... 80

13 Anti-theft alarm systemstatus LED ........................... 27

14 Infotainment system15 Glovebox .............................. 5216 Climate control system .......... 9617 AUX input, USB input18 Selector lever ..................... 11119 Seat heating .......................... 3720 Parking brake ...................... 11321 Ignition switch with

steering wheel lock ............ 10522 Horn ..................................... 61

Driver airbag ........................ 4323 Bonnet release lever .......... 12824 Steering wheel adjustment . . 6025 Fuse box ............................ 14326 Traction Control system ..... 114

City mode ............................ 115Stop-start system ................ 107Lane departure warning ..... 121Electronic Stability Control . 115

27 Light switch .......................... 90

Headlight rangeadjustment ........................... 91Front fog light ........................ 92Rear fog light ........................ 92

Brightness of instrumentpanel illumination .................. 93

14 In brief

Exterior lightingLight switch

Turn light switch:7 : lights off8 : sidelights9 : headlights

Fog lightsPress button in light switch:> : front fog lights

r : rear fog light

Headlight flash, high beam andlow beam

headlight flash : pull stalkhigh beam : push stalk

High beam 3 90.Headlight flash 3 90.

Turn lights

stalk up : right turn lightstalk down : left turn light

Turn lights 3 92.Parking lights 3 93.

In brief 15

Hazard warning flashers

Operated by pressing ¨.Hazard warning flashers 3 91.

Horn

Press j.

Washer and wiper systemsWindscreen wiper

HI : fastLO : slowE : interval wipingOFF : off

For single wipe when the wiper is off,press lever down to position 2.Windscreen wiper 3 61.

16 In brief

Windscreen washer

Pull lever.Windscreen washer system 3 61.Washer fluid 3 131.Wiper blade replacement 3 133.

Rear window wiper

Press the rocker switch to activate therear window wiper:upper switch : continuous

operationlower switch : intermittent

operationmiddle position : off

Rear window washer

Push lever.Washer fluid is sprayed on the rearwindow and the wiper wipes a fewtimes.Rear window wiper and washer3 62.

In brief 17

Climate controlHeated rear window

The heating is operated by pressingÜ.Heated rear window 3 32.

Heated exterior mirrorsPressing Ü also activates the heatedexterior mirrors.Heated exterior mirrors 3 29.

Demisting and defrosting thewindows● Set air distribution control to V.● Set temperature control to

warmest level.● Set fan speed to highest level.● Electronic climate control

system: Press V.● Switch on heated rear window Ü.● Open side air vents as required

and direct them towards the doorwindows.

Climate control system 3 96.

Transmission

To engage reverse, depress theclutch pedal and engage the reversegear.If the gear does not engage, set thelever to neutral, release the clutchpedal and depress again; then repeatgear selection.Transmission 3 111.

18 In brief

Starting offCheck before starting off● Tyre pressure and condition

3 146, 3 174.● Engine oil level and fluid levels

3 129.● All windows, mirrors, exterior

lighting and number plates arefree from dirt, snow and ice andare operational.

● Proper position of mirrors 3 28,seats 3 35, and seat belts3 39.

● Brake function at low speed,particularly if the brakes are wet.

Starting the engine

● Turn key to position 1.● Move the steering wheel slightly

to release the steering wheellock.

● Operate clutch and brake pedal.● Do not operate accelerator pedal.● Turn key to position 3 and

release.Starting the engine 3 107.To turn the key back from position 2to 1 or 0, first push the key all the wayin towards the steering column.

Stop-start system

If the vehicle is at a low speed or at astandstill and certain conditions arefulfilled, activate an Autostop asfollows:● Depress the clutch pedal.● Engage neutral gear.● Release the clutch pedal.

An Autostop is indicated by theneedle at the AUTOSTOP position inthe tachometer.To restart the engine, depress theclutch pedal again.

In brief 19

Parking

9 Warning

● Do not park the vehicle on aneasily ignitable surface. Thehigh temperature of theexhaust system could ignite thesurface.

● Always apply the parkingbrake. Activate the manualparking brake without pressingthe release button. Apply asfirmly as possible on a downhillslope or uphill slope. Depressbrake pedal at the same time toreduce operating force.

● Switch off the engine.● If the vehicle is on a level

surface or uphill slope, engagefirst gear before removing theignition key. On an uphill slope,turn the front wheels away fromthe kerb.If the vehicle is on a downhillslope, engage reverse gearbefore removing the ignition

key. Turn the front wheelstowards the kerb.

● Close the windows and thesunroof.

● Remove the ignition key fromthe ignition switch. Turn thesteering wheel until thesteering wheel lock is felt toengage.

● Lock the vehicle by pressing e onthe radio remote control.Activate the anti-theft alarmsystem 3 27.

● The engine cooling fans may runafter the engine has beenswitched off 3 128.

Caution

After running at high enginespeeds or with high engine loads,operate the engine briefly at a lowload or run in neutral forapprox. 30 seconds beforeswitching off, in order to protectthe turbocharger.

Keys, locks 3 20.Laying-up the vehicle for a longperiod of time 3 127.

20 Keys, doors and windows

Keys, doors andwindows

Keys, locks ................................... 20Keys .......................................... 20Radio remote control ................. 21Memorised settings ................... 22Central locking system .............. 22Child locks ................................. 24

Doors ........................................... 25Front doors ................................ 25Rear doors ................................. 25Load compartment .................... 25

Vehicle security ............................ 27Anti-theft alarm system .............. 27Immobiliser ................................ 27

Exterior mirrors ............................ 28Mirrors ....................................... 28Manual adjustment .................... 28Electric adjustment .................... 28Folding mirrors .......................... 28Heated mirrors ........................... 29

Interior mirrors ............................. 29Manual anti-dazzle .................... 29

Windows ...................................... 30Windscreen ............................... 30

Manual windows ........................ 30Power windows ......................... 30Heated rear window .................. 32Sun visors .................................. 32

Roof ............................................. 32Sunroof ...................................... 32

Keys, locksKeys

Caution

Do not attach heavy or bulky itemsto the ignition key.

Replacement keysThe key number is specified on adetachable tag.The key number must be quotedwhen ordering replacement keys, asit is a component of the immobilisersystem.Locks 3 161.The code number of the adapter forthe locking wheel bolts is specified ona card. It must be quoted whenordering a replacement adapter.Wheel changing 3 154.

Keys, doors and windows 21

Key with foldaway key section

Press button to extend. To fold thekey, first press the button.

Radio remote control

Used to operate:● central locking system● anti-theft alarm system

The radio remote control has a rangeof approx. 20 m. It can be restrictedby external influences. The hazardwarning flashers confirm operation.Handle with care, protect frommoisture and high temperatures andavoid unnecessary operation.

FaultIf the central locking system cannotbe operated with the radio remotecontrol, it may be due to the following:● The range is exceeded.● The battery voltage is too low.● Frequent, repeated operation of

the radio remote control while notin range, which will require re-synchronisation.

● Overload of the central lockingsystem by operating at frequentintervals, the power supply isinterrupted for a short time.

● Interference from higher-powerradio waves from other sources.

Unlocking 3 22.

Radio remote control batteryreplacementReplace the battery as soon as therange reduces.

22 Keys, doors and windows

Batteries do not belong in householdwaste. They must be disposed of atan appropriate recycling collectionpoint.

Key with foldaway key section

Press button to extend the key.

Open the unit. Replace the battery(battery type CR 2032), payingattention to the installation position.Close the unit and synchronise.

Memorised settingsWhenever the ignition is switched off,some functions of the followingsettings may be automaticallymemorised by the remote control unit:● lighting● presets for Infotainment system● central locking system● comfort settings

The saved settings are automaticallyused the next time the memorised keyis inserted into the ignition switch andturned to position 1 3 105.A precondition is that PersonalizationBy Driver is activated in the personalsettings of the Info Display.This must be set for each key used.Vehicle personalisation 3 83.

Central locking systemUnlocks and locks doors and loadcompartment.NoteIn the event of an accident in whichairbags or belt pretensioners aredeployed, the vehicle isautomatically unlocked.

Keys, doors and windows 23

Unlocking

Press c.Two settings are selectable in theInfo Display:● To unlock only the driver's door,

press c once. To unlock all doorsand load compartment, press ctwice.

● Press c once to unlock all doorsand load compartment.

The setting can be changed in themenu Settings in the Info Display.Vehicle personalisation 3 83.The setting can be saved for the keybeing used.

Memorised settings 3 22.

LockingClose doors and load compartment.

Press e.If the driver's door is not closedproperly, the central locking systemwill not work.

Central locking buttonsLocks or unlocks doors and the loadcompartment from inside thepassenger compartment.

Press e to lock.Press c to unlock.

24 Keys, doors and windows

Fault in radio remote controlsystem

Unlocking

Manually unlock the driver's door byturning the key in the lock. Switch onthe ignition and press the centrallocking button c to unlock the otherdoors and load compartment.By switching on the ignition, the anti-theft alarm system is deactivated.

LockingClose all doors. Open the driver'sdoor and press the central lockingbutton. The vehicle is locked.

Close the driver's door. Manually lockthe driver's door by turning the key.

Fault in central locking system

UnlockingManually unlock the driver's door byturning the key in the lock. From theinside of the vehicle the doors can beunlocked by pulling up the lock buttonon the respective door. The loadcompartment cannot be unlocked.

Automatic door lockingIf no door is opened or the position ofignition key is not located in position1 or position 2 within 3 minutes afterunlocking with the radio remotecontrol, all the doors are locked andthe anti-theft alarm system isactivated automatically.

Child locks

9 Warning

Use the child locks wheneverchildren are occupying the rearseats.

Move the pin in the rear door to thefront. The door cannot be openedfrom inside.

Keys, doors and windows 25

DoorsFront doorsCentral locking systemSee Central locking system 3 22.

Manual door locks

Unlock a front door by turning the keyin the lock anti-clockwise. Pull thehandle to open the door.To lock the door, turn the keyclockwise in the lock.

Rear doorsCentral locking systemSee Central locking system 3 22.

Manual door locks

To unlock a rear door, pull the interiorlock button on the respective door.Open the door by pulling the handle.Push the interior lock button down tolock the respective door.

Load compartmentTailgate

OpeningCentral locking system

To open the tailgate with all doorsunlocked, push the touchpad switchon the underside of the tailgatehandle and lift up the tailgate.

26 Keys, doors and windows

Manual door locks

To unlock the tailgate, insert the keyinto the lock and turn it anti-clockwiseinto a horizontal position. Lift thetailgate to open it.

Closing

Use interior handle to lower and closethe tailgate.Do not press the touchpad switchwhilst closing as this will unlock thetailgate again.Central locking system 3 22.Manual door locksTo lock the tailgate, insert the key intothe lock and turn it clockwise into avertical position.

General hints for operatingtailgate

9 Danger

Do not drive with the tailgate openor ajar, e.g. when transportingbulky objects, since toxic exhaustgases, which cannot be seen orsmelled, could enter the vehicle.This can cause unconsciousnessand even death.

Caution

Before opening the tailgate, checkoverhead obstructions, e.g. agarage door, to avoid damage tothe tailgate. Always check themoving area above and behind thetailgate.

NoteThe installation of certain heavyaccessories onto the tailgate mayaffect its ability to remain open.

Keys, doors and windows 27

Vehicle securityAnti-theft alarm systemIt monitors:● doors, tailgate, bonnet● ignition

Status LED

Status LED is integrated in the sensoron top of the instrument panel.

Status during the first 30 seconds ofanti-theft alarm system activation:LED illuminates : test, arming delayLED flashesquickly

: doors, tailgate orbonnet notcompletely closed,or system fault

Seek the assistance of a workshop inthe event of faults.

DeactivationUnlocking the vehicle by pressing cdeactivates anti-theft alarm system.

AlarmWhen triggered, the alarm hornsounds and the hazard warning lightsflash simultaneously. The numberand duration of alarm signals arestipulated by legislation.The alarm can be silenced bypressing any button on the radioremote control or by switching on theignition.The anti-theft alarm system can onlybe deactivated by pressing c on theradio remote control or by switchingon the ignition.

Vehicle messages 3 81.If the vehicle's battery is to bedisconnected (e.g. for maintenancework), the alarm siren must bedeactivated as follows: Switch theignition on then off, then disconnectthe vehicle's battery within15 seconds.

ImmobiliserThe system is part of the ignitionswitch and checks whether thevehicle is allowed to be started withthe key being used.The immobiliser is activatedautomatically after the key has beenremoved from the ignition switch.If the control indicator d flashes whenthe ignition is on, there is a fault in thesystem; the engine cannot be started.Switch off the ignition and repeat thestart attempt.If the control indicator continuesflashing, attempt to start the engineusing the spare key and seek theassistance of a workshop.

28 Keys, doors and windows

NoteThe immobiliser does not lock thedoors. You should always lock thevehicle after leaving it.Switch on the anti-theft alarmsystem 3 22, 3 27.

Control indicator d 3 74.

Exterior mirrorsMirrorsThe shape of the mirrors makesobjects appear smaller, which willaffect the ability to estimatedistances.

Manual adjustment

Adjust mirrors by swivelling lever inrequired direction.

Electric adjustment

Select the relevant exterior mirror byturning the control to left (L) or right(R). Then swivel the control to adjustthe mirror.In position 0 no mirror is selected.

Folding mirrorsFor pedestrian safety, the exteriormirrors will swing out of their normalmounting position if they are struckwith sufficient force. Reposition themirror by applying slight pressure tothe mirror housing.

Keys, doors and windows 29

Heated mirrorsType 1

Type 2

Operated by pressing Ü.Mirror heating works with the enginerunning.It is switched off automatically after ashort time.

Interior mirrorsManual anti-dazzle

To reduce dazzle, adjust the lever onthe underside of the mirror housing.

30 Keys, doors and windows

WindowsWindscreenWindscreen stickersDo not attach stickers, e.g. toll roadstickers or similar, on the windscreenin the area of the interior mirror.Otherwise the detection zone of thesensor in the mirror housing could berestricted.

Windscreen replacement

Caution

If the vehicle has a front-lookingcamera sensor for the driverassistance systems, it is veryimportant that any windscreenreplacement is performedaccurately according to Opelspecifications. Otherwise, thesesystems may not work properlyand there is a risk of unexpectedbehaviour and / or messages fromthese systems.

Manual windows

The windows can be opened orclosed manually with the windowcranks.

Power windows

9 Warning

Take care when operating thepower windows. Risk of injury,particularly to children.

Be careful when closing thewindows. Ensure that nothingbecomes trapped in them as theymove.

Operable with ignition on (position 2)3 105.Retained power off 3 106.

Operate the switch in the door trim forthe respective window by pushing toopen or pulling to close.

OpenShort push: window opens in stages.

Keys, doors and windows 31

Long push: window opensautomatically up to end position. Tostop movement, move switch inopposite direction.

CloseShort pull: window closes in stages.Longer pull: window closesautomatically up to end position. Tostop movement, move switch inopposite direction.

Safety functionIf the window glass encountersresistance above the middle of thewindow during automatic closing, it isimmediately stopped and openedagain.

Override safety functionIn the event of closing difficulties dueto frost or the like, switch on theignition, then pull the switch severaltimes to close the windows in stages.

Child safety system for rearwindows

Press z to deactivate rear doorpower windows; the LED illuminates.To activate, press z again.

OverloadIf the windows are repeatedlyoperated at short intervals, thewindow operation is disabled forsome time.

Initialising the power windowsIf the windows cannot be opened orclosed automatically (e.g. afterdisconnecting the vehicle battery),activate the window electronics asfollows:1. Close the doors.2. Switch on ignition.3. Close the window completely and

operate the button for anadditional 2 seconds.

4. Repeat this procedure for eachwindow.

32 Keys, doors and windows

Heated rear windowType 1

Type 2

Operated by pressing Ü.Rear window heating works with theengine running.It is switched off automatically after ashort time.

Sun visorsThe sun visors can be folded down orswivelled to the side to preventdazzling.The covers of the mirrors should beclosed when driving.

RoofSunroof

9 Warning

Take care when operating thesunroof. Risk of injury, particularlyto children.Keep a close watch on themovable parts when operatingthem. Ensure that nothingbecomes trapped in them as theymove.

Operable via a rocker switch withignition on (position 2) 3 105.Retained power off 3 106.

Keys, doors and windows 33

RaiseHold switch p depressed until thesunroof is raised at the rear.

OpenFrom raised position press andrelease switch p: the sunroof isopened automatically up to endposition. To stop movement beforeend position, operate switch oncemore.

CloseHold switch r depressed from anyposition until sunroof is closedcompletely. Releasing the switchstops movement in any position.NoteIf the top of the roof is wet, tiltsunroof, allow water to run off andthen open sunroof.

Do not affix any stickers to sunroof.

SunblindThe sunblind is manually operated.Close or open the sunblind by sliding.When the sunroof is open, thesunblind is always open.

34 Seats, restraints

Seats, restraints

Head restraints ............................ 34Front seats ................................... 35

Seat position .............................. 35Seat adjustment ........................ 36Heating ...................................... 37

Seat belts ..................................... 38Three-point seat belt ................. 39

Airbag system .............................. 40Front airbag system ................... 43Side airbag system .................... 44Curtain airbag system ............... 45Airbag deactivation .................... 45

Child restraints ............................. 46Child restraint systems .............. 46Child restraint installationlocations ................................... 49

Head restraints

Position

9 Warning

Only drive with the head restraintset to the proper position.

The upper edge of the head restraintshould be at upper head level. If thisis not possible for extremely tallpeople, set to highest position, andset to lowest position for small people.

Adjustment

Front head restraints, heightadjustment

Press release button, adjust height,engage.

Seats, restraints 35

Rear head restraints, heightadjustment

Pull the head restraint upwards andlet engage. To move downwards,press the catch to release and pushthe head restraint downwards.

Removal of rear head restraintE.g. when using a child restraintsystem 3 46.

Press both catches, pull the headrestraint upwards and remove.

Front seatsSeat position

9 Warning

Only drive with the seat correctlyadjusted.

9 Danger

Do not sit closer than 25 cm to thesteering wheel, to permit safeairbag deployment.

9 Warning

Never adjust seats while driving asthey could move uncontrollably.

9 Warning

Never store any objects under theseats.

36 Seats, restraints

● Sit with buttocks as far backagainst the backrest as possible.Adjust the distance between theseat and the pedals so that legsare slightly angled when fullypressing the pedals. Slide thefront passenger seat as far backas possible.

● Set seat height high enough tohave a clear field of vision on allsides and of all displayinstruments. There should be atleast one hand of clearancebetween head and the roofframe. Your thighs should restlightly on the seat withoutpressing into it.

● Sit with shoulders as far backagainst the backrest as possible.Set the backrest rake so that it ispossible to easily reach thesteering wheel with arms slightlybent. Maintain contact betweenshoulders and the backrest whenturning the steering wheel. Donot angle the backrest too farback. We recommend amaximum rake of approx. 25°.

● Adjust seat and steering wheel ina way that the wrist rests on topof the steering wheel while thearm is fully extended andshoulders on the backrest.

● Adjust the steering wheel 3 60.● Adjust the head restraint 3 34.● Adjust the seat belt 3 39.

Seat adjustmentDrive only with engaged seats andbackrests.

Longitudinal adjustment

Pull handle, slide seat, releasehandle. Try to move the seat back andforth to ensure that the seat is lockedin place.

Seats, restraints 37

Backrest inclination

Pull lever, adjust inclination andrelease lever. Allow the backrest toengage audibly.

Seat height

Lever pumping motionup : seat higherdown : seat lower

Heating

Activate seat heating by pressing ßfor the respective front seat.The LED in the button illuminates toindicate activation.Pressing ß once more deactivatesseat heating.Seat heating is operational whenengine is running.During an Autostop, seat heating isalso operational.Stop-start system 3 107.

38 Seats, restraints

Seat belts

The seat belts are locked duringheavy acceleration or deceleration ofthe vehicle holding the occupants inthe sitting position. Therefore the riskof injury is considerably reduced.

9 Warning

Fasten seat belt before each trip.In the event of an accident, peoplenot wearing seat belts endangertheir fellow occupants andthemselves.

Seat belts are designed to be used byonly one person at a time.Child restraint system 3 46.Periodically check all parts of the beltsystem for damage, pollution andproper functionality.Have damaged components replacedby a workshop. After an accident,have the belts and triggered beltpretensioners replaced by aworkshop.NoteMake sure that the belts are notdamaged by shoes or sharp-edgedobjects or trapped. Prevent dirt fromgetting into the belt retractors.

Seat belt reminderFront seats are equipped with a seatbelt reminder, indicated for driver seatas control indicator X in thetachometer 3 70, and for frontpassenger seat as control indicatork in the Driver Information Centre3 67.

Belt force limitersStress on the body is reduced by thegradual release of the belt during acollision.

Belt pretensionersIn the event of a head-on or rear-endcollision of a certain severity, the frontseat belts are tightened.

9 Warning

Incorrect handling (e.g. removal orfitting of belts) can trigger the beltpretensioners.

Deployment of the belt pretensionersis indicated by continuous illuminationof control indicator v 3 70.Triggered belt pretensioners must bereplaced by a workshop. Beltpretensioners can only be triggeredonce.NoteDo not affix or install accessories orother objects that may interfere withthe operation of the belt

Seats, restraints 39

pretensioners. Do not make anymodifications to belt pretensionercomponents as this will invalidatethe operating permit of your vehicle.

Three-point seat beltFasten

Withdraw the belt from the retractor,guide it untwisted across the bodyand insert the latch plate into thebuckle. Tighten the lap belt regularlywhile driving by pulling the shoulderbelt.

Loose or bulky clothing prevents thebelt from fitting snugly. Do not placeobjects such as handbags or mobilephones between the belt and yourbody.

9 Warning

The belt must not rest against hardor fragile objects in the pockets ofyour clothing.

Seat belt reminder X 3 70.

Unfasten

To release belt, press red button onbelt buckle.

40 Seats, restraints

Using the seat belt while pregnant

9 Warning

The lap belt must be positioned aslow as possible across the pelvisto prevent pressure on theabdomen.

Airbag systemThe airbag system consists of anumber of individual systemsdepending on the scope ofequipment.When triggered, the airbags inflatewithin milliseconds. They also deflateso quickly that it is often unnoticeableduring the collision.

9 Warning

The airbag system deploys in anexplosive manner, repairs must beperformed by skilled personnelonly.

9 Warning

Adding accessories that changethe vehicle's frame, bumpersystem, height, front end or sidesheet metal, may keep the airbagsystem from working properly. Theoperation of the airbag system canalso be affected by changing anyparts of the front seats, seat belts,

airbag sensing and diagnosticmodule, steering wheel,instrument panel, inner door sealsincluding the speakers, any of theairbag modules, ceiling or pillartrim, front sensors, side impactsensors or airbag wiring.

NoteThe airbag systems and beltpretensioner control electronics arelocated in the centre console area.Do not put any magnetic objects inthis area.Do not affix any objects onto theairbag covers and do not cover themwith other materials. Have damagedcovers replaced by a workshop.Each airbag is triggered only once.Have deployed airbags replaced bya workshop. Furthermore, it may benecessary to have the steeringwheel, the instrument panel, parts ofthe panelling, the door seals,handles and the seats replaced.Do not make any modifications tothe airbag system as this willinvalidate the vehicle operatingpermit.

Seats, restraints 41

FaultIf there is a fault in the airbag system,the control indicator v illuminates anda message or a warning codeappears in the Driver InformationCentre. The system is notoperational.Have the cause of the fault remediedby a workshop.Control indicator for airbag systems3 70.

Child restraint systems on frontpassenger seat with airbagsystems

EN: NEVER use a rearward-facingchild restraint on a seat protected byan ACTIVE AIRBAG in front of it;DEATH or SERIOUS INJURY to theCHILD can occur.DE: Nach hinten gerichteteKindersitze NIEMALS auf einem Sitzverwenden, der durch einen davorbefindlichen AKTIVEN AIRBAGgeschützt ist, da dies den TOD oderSCHWERE VERLETZUNGEN DESKINDES zur Folge haben kann.FR: NE JAMAIS utiliser un sièged'enfant orienté vers l'arrière sur unsiège protégé par un COUSSINGONFLABLE ACTIF placé devant lui,sous peine d'infliger desBLESSURES GRAVES, voireMORTELLES à l'ENFANT.ES: NUNCA utilice un sistema deretención infantil orientado haciaatrás en un asiento protegido por unAIRBAG FRONTAL ACTIVO. Peligrode MUERTE o LESIONES GRAVESpara el NIÑO.RU: ЗАПРЕЩАЕТСЯустанавливать детскоеудерживающее устройство лицомназад на сиденье автомобиля,

оборудованном фронтальнойподушкой безопасности, еслиПОДУШКА НЕ ОТКЛЮЧЕНА! Этоможет привести к СМЕРТИ илиСЕРЬЕЗНЫМ ТРАВМАМРЕБЕНКА.NL: Gebruik NOOIT een achterwaartsgericht kinderzitje op een stoel meteen ACTIEVE AIRBAG ervoor, omDODELIJK of ERNSTIG LETSEL vanhet KIND te voorkomen.DA: Brug ALDRIG en bagudvendtautostol på et forsæde med AKTIVAIRBAG, BARNET kan komme iLIVSFARE eller komme ALVORLIGTTIL SKADE.SV: Använd ALDRIG en bakåtvändbarnstol på ett säte som skyddas meden framförvarande AKTIV AIRBAG.DÖDSFALL eller ALLVARLIGASKADOR kan drabba BARNET.FI: ÄLÄ KOSKAAN sijoita taaksepäinsuunnattua lasten turvaistuintaistuimelle, jonka edessä onAKTIIVINEN TURVATYYNY, LAPSIVOI KUOLLA tai VAMMAUTUAVAKAVASTI.

42 Seats, restraints

NO: Bakovervendtbarnesikringsutstyr må ALDRI brukespå et sete med AKTIVKOLLISJONSPUTE foran, da det kanføre til at BARNET utsettes forLIVSFARE og fare for ALVORLIGESKADER.PT: NUNCA use um sistema deretenção para crianças voltado paratrás num banco protegido com umAIRBAG ACTIVO na frente domesmo, poderá ocorrer a PERDA DEVIDA ou FERIMENTOS GRAVES naCRIANÇA.IT: Non usare mai un sistema disicurezza per bambini rivoltoall'indietro su un sedile protetto daAIRBAG ATTIVO di fronte ad esso:pericolo di MORTE o LESIONIGRAVI per il BAMBINO!EL: ΠΟΤΕ μη χρησιμοποιείτε παιδικόκάθισμα ασφαλείας με φορά προς ταπίσω σε κάθισμα που προστατεύεταιαπό μετωπικό ΕΝΕΡΓΟ ΑΕΡΟΣΑΚΟ,διότι το παιδί μπορεί να υποστείΘΑΝΑΣΙΜΟ ή ΣΟΒΑΡΟΤΡΑΥΜΑΤΙΣΜΟ.

PL: NIE WOLNO montować fotelikadziecięcego zwróconego tyłem dokierunku jazdy na fotelu, przedktórym znajduje się WŁĄCZONAPODUSZKA POWIETRZNA.Niezastosowanie się do tegozalecenia może być przyczynąŚMIERCI lub POWAŻNYCHOBRAŻEŃ u DZIECKA.TR: Arkaya bakan bir çocuk emniyetsistemini KESİNLİKLE önünde birAKTİF HAVA YASTIĞI ilekorunmakta olan bir koltuktakullanmayınız. ÇOCUK ÖLEBİLİRveya AĞIR ŞEKİLDEYARALANABİLİR.UK: НІКОЛИ не використовуйтесистему безпеки для дітей, щовстановлюється обличчям назад,на сидінні з УВІМКНЕНОЮПОДУШКОЮ БЕЗПЕКИ, інакше цеможе призвести до СМЕРТІ чиСЕРЙОЗНОГО ТРАВМУВАННЯДИТИНИ.HU: SOHA ne használjon hátrafelénéző biztonsági gyerekülést előlrőlAKTÍV LÉGZSÁKKAL védett ülésen,mert a GYERMEK HALÁLÁT vagyKOMOLY SÉRÜLÉSÉT okozhatja.

HR: NIKADA nemojte koristiti sustavzadržavanja za djecu okrenut premanatrag na sjedalu s AKTIVNIMZRAČNIM JASTUKOM ispred njega,to bi moglo dovesti do SMRTI iliOZBILJNJIH OZLJEDA za DIJETE.SL: NIKOLI ne nameščajte otroškegavarnostnega sedeža, obrnjenega vnasprotni smeri vožnje, na sedež zAKTIVNO ČELNO ZRAČNOBLAZINO, saj pri tem obstajanevarnost RESNIH ali SMRTNIHPOŠKODB za OTROKA.SR: NIKADA ne koristiti bezbednosnisistem za decu u kome su decaokrenuta unazad na sedištu saAKTIVNIM VAZDUŠNIMJASTUKOM ispred sedišta zato štoDETE može da NASTRADA ili da seTEŠKO POVREDI.MK: НИКОГАШ не користете детскоседиште свртено наназад наседиште заштитено со АКТИВНОВОЗДУШНО ПЕРНИЧЕ пред него,затоа што детето може ДА ЗАГИНЕили да биде ТЕШКО ПОВРЕДЕНО.BG: НИКОГА не използвайтедетска седалка, гледаща назад,върху седалка, която е защитена

Seats, restraints 43

чрез АКТИВНА ВЪЗДУШНАВЪЗГЛАВНИЦА пред нея - може дасе стигне до СМЪРТ илиСЕРИОЗНО НАРАНЯВАНЕ наДЕТЕТО.RO: Nu utilizaţi NICIODATĂ un scaunpentru copil îndreptat spre partea dinspate a maşinii pe un scaun protejatde un AIRBAG ACTIV în faţa sa;acest lucru poate duce la DECESULsau VĂTĂMAREA GRAVĂ aCOPILULUI.CS: NIKDY nepoužívejte dětskýzádržný systém instalovaný protisměru jízdy na sedadle, které jechráněno před sedadlem AKTIVNÍMAIRBAGEM. Mohlo by dojít kVÁŽNÉMU PORANĚNÍ nebo ÚMRTÍDÍTĚTE.SK: NIKDY nepoužívajte detskúsedačku otočenú vzad na sedadlechránenom AKTÍVNYM AIRBAGOM,pretože môže dôjsť k SMRTI aleboVÁŽNYM ZRANENIAM DIEŤAŤA.LT: JOKIU BŪDU nemontuokite atgalatgręžtos vaiko tvirtinimo sistemossėdynėje, prieš kurią įrengta AKTYVIORO PAGALVĖ, nes VAIKAS GALIŽŪTI arba RIMTAI SUSIŽALOTI.

LV: NEKĀDĀ GADĪJUMĀneizmantojiet uz aizmuguri vērstubērnu sēdeklīti sēdvietā, kas tiekaizsargāta ar tās priekšā uzstādītuAKTĪVU DROŠĪBAS SPILVENU, jopretējā gadījumā BĒRNS var gūtSMAGAS TRAUMAS vai IET BOJĀ.ET: ÄRGE kasutage tahapoolesuunatud lapseturvaistet istmel, milleees on AKTIIVSE TURVAPADJAGAkaitstud iste, sest see võibpõhjustada LAPSE SURMA võiTÕSISE VIGASTUSE.MT: QATT tuża trażżin għat-tfal lijħares lejn in-naħa ta’ wara fuq sitprotett b’AIRBAG ATTIV quddiemu;dan jista’ jikkawża l-MEWT jewĠRIEĦI SERJI lit-TFAL.GA: Ná húsáid srian sábháilteachtalinbh cúil RIAMH ar shuíochán abhfuil mála aeir ag feidhmiú os achomhair. Tá baol BÁIS nó GORTÚDONA don PHÁISTE ag baint leis.Beyond the warning required byECE R94.02, for safety reasons aforward-facing child restraint systemmust only be used subject to theinstructions and restrictions in thetables 3 49.

The airbag label is located on bothsides of the front passenger sun visor.Airbag deactivation 3 45.

Front airbag systemThe front airbag system consists ofone airbag in the steering wheel andone in the instrument panel on thefront passenger side. The location isidentified by the word AIRBAG.The front airbag system is triggered inthe event of a front-end impact of acertain severity. The ignition must beswitched on.

44 Seats, restraints

The inflated airbags cushion theimpact, thereby reducing the risk ofinjury to the upper body and head ofthe front seat occupantsconsiderably.

9 Warning

Optimum protection is onlyprovided when the seat is in theproper position.Seat position 3 35.Keep the area in which the airbaginflates clear of obstructions.Fit the seat belt correctly andengage securely. Only then is theairbag able to protect.

Side airbag system

The side airbag system consists of anairbag in each front seat backrest.The location is identified by the wordAIRBAG.The side airbag system is triggered inthe event of a side impact of a certainseverity. The ignition must beswitched on.

The inflated airbags cushion theimpact, thereby reducing the risk ofinjury to the upper body and pelvis inthe event of a side-on collisionconsiderably.

9 Warning

Keep the area in which the airbaginflates clear of obstructions.

NoteOnly use protective seat covers thathave been approved for the vehicle.Be careful not to cover the airbags.

Seats, restraints 45

Curtain airbag systemThe curtain airbag system consists ofan airbag in the roof frame on eachside. The location is identified by theword AIRBAG on the roof pillars.The curtain airbag system is triggeredin the event of a side-on impact of acertain severity. The ignition must beswitched on.

The inflated airbags cushion theimpact, thereby reducing the risk ofinjury to the head in the event of aside-on impact considerably.

9 Warning

Keep the area in which the airbaginflates clear of obstructions.The hooks on the handles in theroof frame are only suitable forhanging up light articles ofclothing, without coat hangers. Donot keep any items in theseclothes.

Airbag deactivationThe front passenger airbag systemmust be deactivated for a childrestraint system on the passengerseat according to the instructions inthe tables 3 49.The other airbag systems, the beltpretensioners and all driver airbagsystems will remain active.

The front passenger airbag systemcan be deactivated via a key-operated switch on the passengerside of the instrument panel.Use the ignition key to choose theswitch position:*OFF : front passenger airbag is

deactivated and will notinflate in the event of acollision. Control indicator*OFF illuminatescontinuously

VON : front passenger airbag isactive

46 Seats, restraints

9 Danger

Deactivate passenger airbag onlyin combination with the use of achild restraint system, subject tothe instructions and restrictions inthe tables 3 49.Otherwise, there is a risk of fatalinjury for a person occupying aseat with a deactivated frontpassenger airbag.

If control indicator d illuminates forapprox. 60 seconds after the ignitionis switched on, the front passengerairbag system will inflate in the eventof a collision.If both control indicators areilluminated at the same time, there isa system failure. The status of thesystem is not discernible, thereforeno person is allowed to occupy thefront passenger seat. Contact aworkshop immediately.Change status only when the vehicleis stopped with the ignition off.Status remains until the next change.Control indicator for airbagdeactivation 3 70.

Child restraintsChild restraint systems

9 Danger

If using a rear-facing child restraintsystem on the front passengerseat, the airbag system for thefront passenger seat must bedeactivated. This also applies tocertain forward-facing childrestraint systems as indicated inthe tables 3 49.

Airbag deactivation 3 45.Airbag label 3 40.We recommend a child restraintsystem which is tailored specifically tothe vehicle. For further information,contact your workshop.When a child restraint system is beingused, pay attention to the followingusage and installation instructions aswell as to those supplied with the childrestraint system.

Seats, restraints 47

Always comply with local or nationalregulations. In some countries, theuse of child restraint systems isforbidden on certain seats.Child restraint systems can befastened with:● Three-point seat belt● ISOFIX brackets● Top-tether anchor

Three-point seat beltChild restraint systems can befastened by using a three-point seatbelt. After fastening the child restraintsystem the seat belt has to betightened 3 49.

ISOFIX brackets

Fasten vehicle-approved ISOFIXchild restraint systems to the ISOFIXmounting brackets. Specific vehicleISOFIX child restraint systempositions are marked in the table byIL.ISOFIX mounting brackets areindicated by a ISOFIX label on thebackrest.ISOFIX child restraint systems ofuniversal category positions aremarked in the table by IUF.Either a Top-tether strap or a supportleg must be used in addition to theISOFIX mounting brackets.

Remove rear head restraint beforemounting a child restraint system, ifrequired 3 34.

Top-tether anchorsTop-tether anchors are marked withthe symbol : for a child seat.

In addition to the ISOFIX mountingbrackets, fasten the Top-tether strapto the Top-tether anchors.ISOFIX child restraint systems ofuniversal category positions aremarked in the table by IUF 3 49.Remove rear head restraint beforemounting a child restraint system, ifrequired 3 34.

48 Seats, restraints

Selecting the right systemThe rear seats are the mostconvenient location to fasten a childrestraint system.Children should travel facingrearwards in the vehicle as long aspossible. This ensures that the child'sbackbone, which is still very weak, isunder less strain in the event of anaccident.Suitable are restraint systems thatcomply with valid UN ECEregulations. Check local laws andregulations for mandatory use of childrestraint systems.Ensure that the child restraint systemto be installed is compatible with thevehicle type.Refer to the tables on the followingpages, the instructions supplied withthe child restraint system and thevehicle type list of non-universal childrestraint systems.

The following child restraints arerecommended for the followingweight classes:● Group 0, Group 0+

Maxi Cosi Cabriofix with ISOFIXbase, for children up to 13 kg

● Group IDuo Plus with ISOFIX and Toptether, for children from 9 kg to18 kg in this group

● Group II, Group IIIKidfix XP with or without ISOFIXfor children from 15 kg to 36 kgNania / OSANN Dream Boosterwith or without ISOFIX forchildren from 22 kg to 36 kg

Ensure that the mounting location ofthe child restraint system within thevehicle is correct, see followingtables.Allow children to enter and exit thevehicle only on the side facing awayfrom the traffic.When the child restraint system is notin use, secure the seat with a seat beltor remove it from the vehicle.

NoteDo not affix anything on the childrestraint systems and do not coverthem with any other materials.A child restraint system which hasbeen subjected to stress in anaccident must be replaced.

Seats, restraints 49

Child restraint installation locationsPermissible options for fastening a child restraint system with a three-point seat belt

Weight classOn front passenger seat

On rear outboard seats On rear centre seatactivated airbag deactivated airbag

Group 0: up to 10 kg X U1 U2 X

Group 0+: up to 13 kg X U1 U2 X

Group I: 9 to 18 kg X U1 U2, 3 X

Group II: 15 to 25 kg X X U2, 3 X

Group III: 22 to 36 kg X X U2, 3 X

U : universal suitability in conjunction with three-point seat beltX : no child restraint system permitted in this weight class1 : adjust seat backrest as far as necessary to a vertical position to ensure that the belt runs forwards from the upper

anchorage point2 : move the driver and/or passenger seat forwards and adjust seat backrest as far as necessary to a vertical position

to ensure that the child restraint system does not have any interference from the front seat backrest.3 : adjust the respective headrest as necessary or remove if required.

50 Seats, restraints

Permissible options for fitting an ISOFIX child restraint system

Weight class Size class Fixture On front passenger seat On rear outboard seats On rear centre seat

Group 0: up to 10 kg F ISO/L1 X X X

G ISO/L2 X X X

E ISO/R1 X IL1 X

Group 0+: up to 13 kg E ISO/R1 X IL1 X

D ISO/R2 X IL1 X

C ISO/R3 X IL1 X

Group I: 9 to 18 kg D ISO/R2 X IL1,2 X

C ISO/R3 X IL1,2 X

B ISO/F2 X IL, IUF1,2 X

B1 ISO/F2X X IL, IUF1,2 X

A ISO/F3 X IL, IUF1,2 X

Group II: 15 to 25 kg X IL1,2 X

Group III: 22 to 36 kg X IL1,2 X

IL : suitable for particular ISOFIX restraint systems of the "specific-vehicle", "restricted" or "semi-universal" categories.The ISOFIX restraint system must be approved for the specific vehicle type (refer to the vehicle type list of the childrestraint system)

IUF : suitable for ISOFIX forward-facing child restraint systems of universal category approved for use in this weight class

Seats, restraints 51

X : no ISOFIX child restraint system approved for this weight class1 : only applicable for rear outer seat on passenger side with foremost seating position and backrest upright.2 : adjust the respective headrest as necessary or remove if required.

NoteMove the driver and/or passenger seat forwards and adjust seat backrest inclination as far as necessary to a verticalposition to ensure that the child restraint system does not have any interference from the front seat backrest.

ISOFIX size class and seat deviceA – ISO/F3 : forward-facing child restraint system for children of maximum size in the weight class 9 to 18 kgB – ISO/F2 : forward-facing child restraint system for smaller children in the weight class 9 to 18 kgB1 – ISO/F2X : forward-facing child restraint system for smaller children in the weight class 9 to 18 kgC – ISO/R3 : rear-facing child restraint system for children of maximum size in the weight class up to 18 kgD – ISO/R2 : rear-facing child restraint system for smaller children in the weight class up to 18 kgE – ISO/R1 : rear-facing child restraint system for young children in the weight class up to 13 kgF - ISO/L1 : left lateral facing position CRS (carry cot) for smaller children in the weight class up to 10 kgG - ISO/L2 : right lateral facing position CRS (carry cot) for smaller children in the weight class up to 10 kg.

Permissible options for fitting an i-size child restraint system with ISOFIX brackets

On front passenger seatOn rear outboard seats On rear centre seatactivated airbag deactivated airbag

i-size child restraint systems X X X X

i - U : suitable for i-size 'universal' forward and rearward facing child restraint systemsX : seating position not suitable for i-size 'universal' child restraint systems

52 Storage

Storage

Storage compartments ................ 52Glovebox ................................... 52Cupholders ................................ 52Centre console storage ............. 53

Load compartment ....................... 53Load compartment cover ........... 55Rear floor storage cover ............ 56Warning triangle ........................ 56First aid kit ................................. 57

Roof rack system ......................... 57Roof rack ................................... 57

Loading information ..................... 58

Storage compartments

9 Warning

Do not store heavy or sharpobjects in the storagecompartments. Otherwise, thestorage compartment lid couldopen and vehicle occupants couldbe injured by objects being thrownaround in the event of hardbraking, a sudden change indirection or an accident.

Glovebox

Pull lever to open the glovebox cover.The glovebox features an adapter forthe locking wheel bolts.The glovebox should be closed whilstdriving.

Cupholders

Cupholders are located in the centreconsole.

Storage 53

Centre console storage

The storage is used for small articles.

Load compartment

Load compartment extension

Caution

First fold up the rear seat cushionbefore folding the rear seatbackrest.Disregard may lead to damage tothe rear seat.

NoteTo ensure sufficient room for rearseat cushion operation, slide thefront seats forward and move thefront seat backrest upright.

1. Pull up the front of the rear seatcushion to release it.

2. Guide the rear of the rear seatcushion to an upright position.

3. Remove the rear seat headrestraints 3 34.

54 Storage

4. Pull the release knob on top of therear backrest.

5. Fold down the backrest and insertthe rear seat head restraints intothe pockets.

6. Put the seat belts for the outboardseats into the belt guides.

7. Adjust the front seats to thedesired position.

To return the backrest to the originalposition:1. Lift the backrest up and pull out

the seat belt from the belt guides.Push backrest firmly into place.

9 Warning

When folding up, ensure thatbackrests are securely engaged inposition before driving. Failure todo so may result in personal injury

or damage to the load or vehicle inthe event of hard braking or acollision.

Ensure the seat belts are notpinched by the latch.

2. Reinstall the rear head restraints.3. Place the rear part of the seat

cushion in its original position.NoteMake sure the seat belts are nottwisted or caught under the seatcushion.4. Push the front part of the seat

cushion down firmly until itlatches.

The centre rear seat belt may lockwhen you raise the backrest. If thishappens, allow the belt to go back allthe way and repeat operation.If the seat belt is still locked, fold downthe seat cushion and try again.To return the rear seat cushion, putthe rear part of the seat cushion in itsoriginal position ensuring that theseat belt buckle straps are not twisted

Storage 55

or caught under the seat cushion,then push the front part of the seatcushion firmly down until it latches.

Caution

When returning rear seat backrestto the upright position, place therear seat belt and bucklesbetween the rear seat backrestand one cushion. Make sure therear seat belt and buckles do notget pinched under the rear seatcushion.Ensure the seat belts are nottwisted or caught in the seatbackrest and are arranged in theirproper position.

To remove the rear seat cushion,push the hinges in direction of arrow.

Load compartment coverDo not place heavy objects on thecover.

RemovingLift cover at the rear and push itupwards at the front.Remove the cover.

StowingWhen the load compartment is fullyloaded, stow the load compartmentcover on the rear seats or removefrom vehicle.

FittingEngage cover in side guides and folddownwards. Attach retaining straps totailgate.

56 Storage

Rear floor storage coverRear floor cover

Lift up rear floor cover to gain accessto the tyre repair kit, vehicle tools andwarning triangle.On versions with spare wheel, thespare wheel is located under the rearfloor cover together with the vehicletools.Tools 3 144.

General hint

9 Warning

For safety reasons, stow all partsin the load compartment in itsposition, always drive with aclosed rear floor cover and, ifpossible, with folded up rearbackrests.Otherwise, vehicle occupantscould be injured by objects beingthrown around in the event ofsharp braking, a sudden change indirection or an accident.

Warning triangleVehicles with spare wheel

Stow the warning triangle in the loadcompartment.

Storage 57

Vehicles with tyre repair kit

Stow the warning triangle in thevehicle tool box below the floor overin the load compartment.

First aid kit

Stow the first-aid kit in the loadcompartment.

Roof rack systemRoof rackFor safety reasons and to avoiddamage to the roof, a vehicleapproved roof rack system isrecommended.Mount the roof rack to the roof railsfollowing the installation instructionsdelivered with the roof rack.Remove the roof rack when not inuse.

58 Storage

Loading information● Heavy objects in the load

compartment should be placedagainst the seat backrests.Ensure that the backrests aresecurely engaged. If objects canbe stacked, heavier objectsshould be placed at the bottom.

● Prevent sliding of loose objectsby securing them with strapsattached to the lashing eyes.

● When transporting objects in theload compartment, the backrestsof the rear seats must not beangled forward.

● Do not allow the load to protrudeabove the upper edge of thebackrests.

● Do not place any objects on theload compartment cover or theinstrument panel, and do notcover the sensor on top of theinstrument panel.

● The load must not obstruct theoperation of the pedals, parkingbrake and gear selector lever, or

hinder the freedom of movementof the driver. Do not place anyunsecured objects in the interior.

● Do not drive with an open loadcompartment.

9 Warning

Always make sure that the load inthe vehicle is securely stowed.Otherwise objects can be thrownaround inside the vehicle andcause personal injury or damageto the load or vehicle.

● The payload is the differencebetween the permitted grossvehicle weight (see identificationplate 3 168) and the EC kerbweight.To calculate the payload, enterthe data for your vehicle in theweights table at the front of thismanual.The EC kerb weight includesweights for the driver (68 kg),luggage (7 kg) and all fluids (fueltank 90% full).

Optional equipment andaccessories increase the kerbweight.

● Driving with a roof load increasesthe sensitivity of the vehicle tocross-winds and has adetrimental effect on vehiclehandling due to the vehicle'shigher centre of gravity.Distribute the load evenly andsecure it properly with retainingstraps. Adjust the tyre pressureand vehicle speed according tothe load conditions. Check andretighten the straps frequently.The permissible roof load forvehicles with roof railing is 50 kg.The roof load is the combinedweight of the roof rack and theload.

Instruments and controls 59

Instruments andcontrols

Controls ....................................... 60Steering wheel adjustment ........ 60Steering wheel controls ............. 60Heated steering wheel ............... 60Horn ........................................... 61Windscreen wiper and washer . . 61Rear window wiper andwasher ...................................... 62

Outside temperature .................. 62Clock ......................................... 62Power outlets ............................. 64Cigarette lighter ......................... 64Ashtrays .................................... 64

Warning lights, gauges and indi‐cators ........................................... 64

Instrument cluster ...................... 64Speedometer ............................. 64Odometer .................................. 65Trip odometer ............................ 65Tachometer ............................... 65Fuel gauge ................................ 65Engine coolant temperaturegauge ....................................... 66

Service display .......................... 66

Control indicators ...................... 67Turn lights .................................. 69Seat belt reminder ..................... 70Airbag and belt tensioners ......... 70Airbag deactivation .................... 70Charging system ....................... 71Malfunction indicator light .......... 71Service vehicle soon ................. 71Brake and clutch system ........... 71Operate pedal ............................ 71Antilock brake system (ABS) ..... 72Gear shifting .............................. 72Power steering .......................... 72Lane departure warning ............ 72Parking assist ............................ 72Electronic Stability Control off . . . 72Electronic Stability Control andTraction Control system ........... 72

Traction Control system off ....... 73Engine coolant temperature ...... 73Tyre pressure monitoringsystem ...................................... 73

Engine oil pressure .................... 73Low fuel ..................................... 74Immobiliser ................................ 74Reduced engine power ............. 74Exterior light .............................. 74High beam ................................. 74Front fog lights ........................... 74Rear fog light ............................. 74

Cruise control ............................ 74Speed limiter ............................. 74Bonnet open .............................. 74Door open .................................. 75

Displays ....................................... 75Driver Information Centre .......... 75Info Display ................................ 80

Vehicle messages ........................ 81Warning chimes ......................... 83Battery voltage .......................... 83

Vehicle personalisation ................ 83Telematics service ....................... 86

OnStar ....................................... 86

60 Instruments and controls

ControlsSteering wheel adjustment

Unlock lever, adjust steering wheel,then engage lever and ensure it isfully locked.Do not adjust steering wheel unlessvehicle is stationary and steeringwheel lock has been released.

Steering wheel controls

Cruise control and speed limiter areoperated via the controls on the leftside of the steering wheel.Infotainment system can be operatedvia the controls on the right side of thesteering wheel.Driver assistance systems 3 117.Further information is available in theInfotainment manual.

Heated steering wheel

Activate heating by pressing A.Activation is indicated by the LED inthe button.

Instruments and controls 61

The grip areas of the steering wheelare heated quicker and to a highertemperature than the other areas.Heating is operational when theengine is running and during anAutostop.Stop-start system 3 107.

Horn

Press j.

Windscreen wiper andwasherWindscreen wiper

HI : fastLO : slowE : interval wipingOFF : off

For a single wipe when thewindscreen wiper is off, press thelever down to position 2.Do not use if the windscreen is frozen.Switch off in car washes.

Windscreen washer

Pull lever. Washer fluid is sprayedonto the windscreen and the wiperwipes a few times.Washer fluid 3 131

62 Instruments and controls

Rear window wiper andwasher

Press the rocker switch to activate therear window wiper:upper position : continuous

operationlower position : intermittent

operationmiddle position : off

Push lever. Washer fluid is sprayedonto the rear window and the wiperwipes a few times.Do not use if the rear window isfrozen.Switch off in car washes.The rear window wiper comes onautomatically when the windscreenwiper is switched on and reverse gearis engaged.Activation or deactivation of thisfunction can be changed in the menuSettings in the Info Display.Washer fluid 3 131.Vehicle personalisation 3 83.

Outside temperatureA drop in temperature is indicatedimmediately and a rise in temperatureafter a time delay.

9 Warning

The road surface may already beicy even though the displayindicates a few degrees above0 °C.

ClockDate and time are shown in theInfo Display.Info Display 3 80.

Instruments and controls 63

Graphic Info DisplayPress MENU to open the respectiveaudio menu.

Select Time and Date.

Set TimeSelect Set Time to enter therespective submenu.Select Auto Set at the bottom of thescreen. Activate either On - RDS orOff (Manual).If Off (Manual) is selected, adjusthours and minutes.Repeatedly select 12-24 HR at thebottom of the screen to choose a timemode.If the 12-hour mode is selected, athird column for AM and PM selectionis displayed. Select the desiredoption.

Set DateSelect Set Date to enter therespective submenu.Select Auto Set at the bottom of thescreen. Activate either On - RDS orOff (Manual).If Off (Manual) is selected, adjust thedate settings.

7'' Colour Info DisplayPress ; and then select Settings.Select Time and Date to display therespective submenu.

Set Time FormatTo select the desired time format,touch the screen buttons 12 h or 24 h.

Set Date FormatTo select the desired date format,select Set Date Format and choosebetween the available options in thesubmenu.

Auto SetTo choose whether time and date areto be set automatically or manually,select Auto Set.For time and date to be setautomatically, select On - RDS.For time and date to be set manually,select Off - Manual. If Auto Set is setto Off - Manual, the submenu itemsSet Time and Set Date becomeavailable.

Set time and dateTo adjust the time and date settings,select Set Time or Set Date.Touch + or - to adjust the settings.

64 Instruments and controls

Power outlets

A 12 V power outlet is located in thecentre console.Do not exceed the maximum powerconsumption of 120 W.With ignition off, the power outlet isdeactivated. Additionally, the poweroutlet is deactivated in the event oflow vehicle battery voltage.Electrical accessories that areconnected must comply with theelectromagnetic compatibilityrequirements laid down inDIN VDE 40 839.

Do not connect any current-deliveringaccessories, e.g. electrical chargingdevices or batteries.Do not damage the outlet by usingunsuitable plugs.Stop-start system 3 107.

Cigarette lighterThe cigarette lighter may be locatedin the centre console.Press in cigarette lighter. It switchesoff automatically once the element isglowing. Pull out lighter.

Ashtrays

Caution

To be used only for ash and not forcombustible rubbish.

The portable ashtray can be placed inthe cupholders.

Warning lights, gaugesand indicatorsInstrument clusterThe needles of the instruments brieflyrotate to the end position when theengine is being switched on.

Speedometer

Indicates vehicle speed.

Instruments and controls 65

Odometer

The bottom line displays the recordeddistance in km.

Trip odometerThe recorded distance is displayedsince the last reset.Trip odometer counts up to9999.9 km and then restarts at 0.To reset, press SET/CLR on the stalkfor a few seconds 3 75.

Tachometer

Displays the engine speed.Drive in a low engine speed range foreach gear as much as possible.

Caution

If the needle is in the red warningzone, the maximum permittedengine speed is exceeded. Engineat risk.

Fuel gauge

Number of LEDs displays the level inthe fuel tank.The arrow indicates the vehicle sidewhere the fuel filler flap is located.

66 Instruments and controls

Control indicator Y illuminates if thelevel in the tank is low. Refuelimmediately if it flashes.Never run the fuel tank dry.Because of the fuel remaining in thetank, the top-up quantity may be lessthan the specified tank capacity.

Engine coolant temperaturegauge

Number of LEDs displays the coolanttemperature.up to 2 LEDs : engine operating

temperature notyet reached

3 to 6 LEDs : normal operatingtemperature

more than 6LEDs

: temperature toohigh

Caution

If engine coolant temperature istoo high, stop vehicle, switch offengine. Danger to engine. Checkcoolant level.

Service displayThe engine oil life system informswhen to change the engine oil andfilter. Based on driving conditions, theinterval at which an engine oil andfilter change will be indicated can varyconsiderably.When the system has calculated thatengine oil life has been diminished, awarning message appears in theDriver Information Centre. Haveengine oil and filter changed by aworkshop within one week or500 km, whichever occurs first.This can be an additional engine oiland filter change or part of a regularservice.

Instruments and controls 67

The remaining engine oil life durationis displayed in percent in the DriverInformation Centre.To display the remaining engine oillife duration use the stalk buttons:

Press MENU to select the VehicleInformation Menu .Turn the adjuster wheel to selectRemaining Oil Life.

ResetPress SET/CLR on the stalk forseveral seconds to reset. Theremaining engine oil life durationmenu must be active. Switch onignition, but not the engine.The system must be reset every timethe engine oil is changed to ensureproper functionality. Seek theassistance of a workshop.

Next serviceA message appears in the DriverInformation Centre, whenmaintenance of the vehicle isrequired. Have maintenance workcarried out by a workshop within oneweek or 500 km, whichever occursfirst.Driver Information Centre 3 75.Service information 3 164.

Control indicatorsThe control indicators described arenot present in all vehicles. Thedescription applies to all instrumentversions.Depending on the equipment, theposition of the control indicators mayvary. When the ignition is switchedon, most control indicators willilluminate briefly as a functionalitytest.The control indicator colours mean:red : danger, important reminderyellow : warning, information, faultgreen : confirmation of activationblue : confirmation of activationwhite : confirmation of activation

68 Instruments and controls

Control indicators in the instrument cluster

Instruments and controls 69

Control indicators in the overheadconsole

Overview

O Turn lights 3 69

X Seat belt reminder 3 70

v Airbag and belt tensioners3 70

V Airbag deactivation 3 70

p Charging system 3 71

Z Malfunction indicator light3 71

g Service vehicle soon 3 71

R Brake and clutch system3 71

- Operate pedal 3 71

u Antilock brake system (ABS)3 72

[ Gear shifting 3 72

c Power steering 3 72

) Lane departure warning 3 72

r Parking assist 3 72

a Electronic Stability Control off3 72

b Electronic Stability Control andTraction Control system 3 72

k Traction Control system off3 73

W Engine coolant temperature3 73

w Tyre pressure monitoringsystem 3 73

I Engine oil pressure 3 73

Y Low fuel 3 74

d Immobiliser 3 74

# Reduced engine power 3 74

8 Exterior light 3 74

C High beam 3 74

> Fog light 3 74

r Rear fog light 3 74

m Cruise control 3 74

L Speed limiter 3 74

/ Bonnet open 3 74

N Door open 3 75

Turn lightsO illuminates or flashes green.

Illuminates brieflyThe parking lights are switched on.

FlashesA turn light or the hazard warningflashers are activated.Rapid flashing: failure of a turn light orassociated fuse.

70 Instruments and controls

Bulb replacement 3 134.Fuses 3 140.Turn lights 3 92.

Seat belt reminderSeat belt reminder on front seatsX for driver's seat illuminates orflashes red in the speedometer.

k for front passenger seat illuminatesor flashes red in the overheadconsole when the seat is occupied.

IlluminatesAfter the ignition has been switchedon, until the seat belt has beenfastened.

FlashesAfter having started the engine, for amaximum of 100 seconds, until theseat belt has been fastened.Fastening the seat belt 3 39.

Seat belt status on rear seatsX in the Driver Information Centreflashes or illuminates.

IlluminatesAfter having started the engine for aminimum of 35 seconds, until the seatbelt has been fastened.

FlashesAfter starting-off, when the seat belt isunfastened.Fastening the seat belt 3 39.

Airbag and belt tensionersv illuminates red.

When the ignition is switched on, thecontrol indicator illuminates forapprox. 4 seconds. If it does notilluminate, does not go out after4 seconds or illuminates whilstdriving, there is a fault in the airbagsystem. Seek the assistance of aworkshop. The airbags and beltpretensioners may fail to trigger in theevent of an accident.Deployment of the belt pretensionersor airbags is indicated by continuousillumination of v.

9 Warning

Have the cause of the faultremedied immediately by aworkshop.

Belt pretensioners 3 38.Airbag system 3 40.

Airbag deactivationd illuminates yellow.The front passenger airbag isactivated.c illuminates yellow.

Instruments and controls 71

The front passenger airbag isdeactivated 3 45.

9 Danger

Risk of fatal injury for a child usinga child restraint system togetherwith activated front passengerairbag.Risk of fatal injury for an adultperson with deactivated frontpassenger airbag.

Charging systemp illuminates red.Illuminates when the ignition isswitched on and extinguishes shortlyafter the engine starts.

Illuminates when the engine isrunningStop, switch off engine. Vehiclebattery is not charging. Enginecooling may be interrupted. Thebrake servo unit may cease to beeffective. Seek the assistance of aworkshop.

Malfunction indicator lightZ illuminates or flashes yellow.Illuminates when the ignition isswitched on and extinguishes shortlyafter the engine starts.

Illuminates when the engine isrunningFault in the emission control system.The permitted emission limits may beexceeded. Seek the assistance of aworkshop immediately.

Flashes when the engine isrunningFault that could lead to catalyticconverter damage. Ease up on theaccelerator until the flashing stops.Seek the assistance of a workshopimmediately.

Service vehicle soong illuminates yellow.Additionally, a warning code isdisplayed in the Driver InformationCentre.The vehicle requires a service.

Seek the assistance of a workshop.Vehicle messages 3 81.

Brake and clutch systemR illuminates red.The brake and clutch fluid level is toolow, when manual parking brake isnot applied 3 131.

9 Warning

Stop. Do not continue yourjourney. Consult a workshop.

Illuminates when the manual parkingbrake is applied and ignition isswitched on 3 113.

Operate pedal- illuminates or flashes yellow.

IlluminatesClutch pedal must be depressed tostart the engine in Autostop mode.Stop-start system 3 107.

72 Instruments and controls

FlashesPedal must be depressed to start theengine with the key 3 107.

Antilock brake system(ABS)u illuminates yellow.Illuminates for a few seconds after theignition is switched on. The system isready for operation when the controlindicator extinguishes.If the control indicator does not go outafter a few seconds, or if it illuminateswhile driving, there is a fault in theABS. The brake system remainsoperational but without ABSregulation.Antilock brake system 3 112.

Gear shifting[ with the number of a higher gear isindicated, when upshifting isrecommended for fuel savingreasons.

Power steeringc illuminates yellow.

Illuminates with power steeringdisabledFailure in the power steering system.Consult a workshop.

Illumination of c and bsimultaneouslySeek the assistance of a workshop.

Lane departure warning) illuminates green or flashes yellow.

Illuminates greenSystem is switched on and ready tooperate.

Flashes yellowSystem recognises an unintendedlane change.Lane departure warning 3 121.

Parking assistr illuminates yellow.

Fault in systemorFault due to sensors that are dirty orcovered by ice or snoworInterference due to external sourcesof ultrasound. Once the source ofinterference is removed, the systemwill operate normally.Have the cause of the fault in thesystem remedied by a workshop.Parking assist 3 119.

Electronic Stability Controlofft illuminates yellow.The system is deactivated.Electronic Stability Control 3 115.

Electronic Stability Controland Traction Control systemb flashes or illuminates yellow.

Instruments and controls 73

FlashesThe system is actively engaged.Engine output may be reduced andthe vehicle may be brakedautomatically to a small degree.

IlluminatesA fault in the system is present. Awarning code appears in the DriverInformation Centre. Continued drivingis possible. The system is notoperational. Driving stability,however, may deteriorate dependingon road surface conditions.Have the cause of the fault remediedby a workshop.Electronic Stability Control 3 115.Traction Control system 3 114.

Traction Control system offk illuminates yellow.The system is deactivated.Traction Control system 3 114.

Engine coolant temperatureW illuminates red.

Illuminates when the engine isrunningStop, switch off engine.

Caution

Coolant temperature too high.

Check coolant level 3 130.If there is sufficient coolant, consult aworkshop.

Tyre pressure monitoringsystemw illuminates or flashes yellow.

IlluminatesTyre pressure loss. Stop immediatelyand check tyre pressure.

FlashesFault in system or tyre withoutpressure sensor mounted (e.g. sparewheel). After 60-90 seconds thecontrol indicator illuminatescontinuously. Consult a workshop.

Tyre pressure monitoring system3 147.

Engine oil pressureI illuminates red.Illuminates when the ignition isswitched on and extinguishes shortlyafter the engine starts.

Illuminates when the engine isrunning

Caution

Engine lubrication may beinterrupted. This may result indamage to the engine and/orlocking of the drive wheels.

1. Depress the clutch.2. Set selector lever to neutral.3. Move out of the flow of traffic as

quickly as possible withoutimpeding other vehicles.

4. Switch off the ignition.

74 Instruments and controls

9 Warning

When the engine is off,considerably more force is neededto brake and steer.During an Autostop, the brakeservo unit will still be operational.Do not remove key until vehicle isstationary, otherwise the steeringwheel lock could engageunexpectedly.

Keep engine turned off and let thevehicle be towed to a workshop.

Low fuelY illuminates or flashes yellow.

IlluminatesLevel in fuel tank is too low.

FlashesFuel used up. Refuel immediately.Never run the fuel tank dry.Refuelling 3 123.Catalytic converter 3 110.

Immobiliserd flashes yellow.Fault in the immobiliser system. Theengine cannot be started.Immobiliser 3 27.

Reduced engine power# illuminates yellow.The engine power is limited. Consulta workshop.

Exterior light8 illuminates green.The exterior lights are on 3 90.

High beamC illuminates blue.Illuminated when high beam is on orduring headlight flash 3 90.

Front fog lights> illuminates green.The front fog lights are on 3 92.

Rear fog lightr illuminates yellow.The rear fog light is on 3 92.

Cruise controlm illuminates white or green.

Illuminates whiteThe system is on.

Illuminates greenCruise control is active.Cruise control 3 117.

Speed limiterL illuminates in the DriverInformation Centre when Speedlimiter is active. Set speed is indicatedalongside L symbol.Speed limiter 3 118.

Bonnet open/ illuminates yellow.Illuminates when the bonnet is open.Stop-start system 3 107.

Instruments and controls 75

Door openN illuminates.A door or the tailgate is open.

DisplaysDriver Information CentreThe Driver Information Centre islocated in the instrument cluster.

Some of the displayed functions differwhen the vehicle is being driven or ata standstill. Some functions are onlyavailable when the vehicle is beingdriven.Main menus are:● trip/fuel information, see

description below● vehicle information, see

description below

The following indications appearwhen appropriate:● warning codes 3 81● gear shift indication 3 72● tyre pressure warning 3 147● seat belt reminder indication

3 70● service information 3 71

Selecting menus and functionsThe menus and functions can beselected via the buttons on the stalk.

76 Instruments and controls

Press MENU to switch between themain menus or to return from asubmenu to the next higher menulevel.

Turn the adjuster wheel to select asubmenu of the main menu or to seta numeric value.

Press SET/CLR to select a function orto confirm a message.Vehicle and service messages arepopped-up in the Driver InformationCentre if required. Confirm messagesby pressing SET/CLR.Vehicle messages 3 81.

Trip/Fuel informationPossible pages are:

Trip odometer

Trip odometer displays the currentdistance since a certain reset.Trip odometer counts up to9999.9 km and then restarts at 0.To reset, press SET/CLR for a fewseconds.

Instruments and controls 77

Fuel range

Range is calculated from current fueltank level and current consumption.The display shows average values.After refuelling, the range is updatedautomatically after a brief delay.When the fuel level in the tank is low,a message appears on the displayand control indicator Y in the fuelgauge illuminates.When the tank must be refuelledimmediately, a warning code appearsand remains on the display.Additionally, control indicator Yflashes in the fuel gauge 3 74.

Average vehicle speed

Display of average speed. Themeasurement can be reset at anytime.To reset, press SET/CLR for a fewseconds while viewing this page.

Instantaneous fuel economy

Display of the instantaneousconsumption.

Average fuel economy

78 Instruments and controls

Display of average consumption. Themeasurement can be reset at anytime and starts with a default value.To reset, press SET/CLR for a fewseconds while viewing this page.

Timer

Indicates driving time since last reset.To stop or start timer pressSET/CLR.To reset press and hold SET/CLR fora few seconds.

Vehicle informationPossible pages are:● unit● remaining engine oil life

indication● tyre pressure● tyre loading

Unit

Press SET/CLR while page isdisplayed. Select metric (unit 1) orimperial (unit 2) by turning theadjuster wheel. Press SET/CLR to setthe unit of measurement.

Remaining oil life

Indicates an estimate of the oil'suseful life. The number in percentagemeans the current remaining oil lifeand indicates when to change theengine oil and filter 3 66.

Instruments and controls 79

Tyre pressure

Tyre pressures of all wheels aredisplayed on this page during driving3 147.

Tyre learn

This display allows for matching newtire and wheel by the tyre pressuremonitoring system sensors 3 147.

Tyre load

The tyre pressure category accordingto the actual tyre inflation pressurecan be selected 3 147.

Outside temperatureDisplay of current outsidetemperature.

LanguageSelect preferred country language asdisplay language.

TimeDisplay of current time.

80 Instruments and controls

Info DisplayThe Info Display is located in theinstrument panel near the instrumentcluster.Depending on the vehicleconfiguration the vehicle has a● Graphic Info Display

or● 7'' Colour Info Display with touch-

screen functionalityThe vehicle has a 7'' Colour InfoDisplay with touch screenfunctionality.The Info Displays can indicate:● time 3 62● outside temperature 3 62● date 3 62● Infotainment system, see

description in the Infotainmentmanual

● indication of parking assistinstructions 3 119

● system messages● settings for vehicle

personalisation 3 83

Graphic Info Display

Press X to switch on the display.Press MENU to select main menupage.Turn MENU to select a menu page.Press MENU to confirm a selection.Press BACK to exit a menu withoutchanging a setting.

7'' Colour Info Display

Selecting menus and settingsMenus and settings are accessed viathe display.

Press X to switch on the display.Press ; to display the homepage.Tap required menu display icon withthe finger.Tap a respective icon to confirm aselection.Depending on version, tap 9 or < toreturn to the next higher menu level.Press ; to return to the homepage.For further information, seeInfotainment manual.Vehicle personalisation 3 83.

Instruments and controls 81

Valet modeSome functions of the DriverInformation Centre and the InfoDisplay can be limited for somedrivers.Activation or deactivation of valetmode can be set in the menuSettings in the vehicle personalisationmenu.Vehicle personalisation 3 83.For more information seeInfotainment manual.

Vehicle messagesMessages are indicated mainly in theDriver Information Centre, in somecases together with a warning chime.

Press SET/CLR, MENU or turn theadjuster wheel to confirm a message.

Vehicle messages in DriverInformation Centre

The vehicle messages are displayedas code numbers.

No. Vehicle message

3 Engine coolant level low

4 Air conditioning off

11 Brakes worn

12 Vehicle overloaded

13 Compressor overheated

82 Instruments and controls

No. Vehicle message

15 Centre high-mounted brakelight failure

16 Brake light failure

17 Headlight levelling malfunction

18 Left low beam failure

19 Rear fog light failure

20 Right low beam failure

21 Left sidelight failure

22 Right sidelight failure

23 Reversing light failure

24 Number plate light failure

25 Left front turn light failure

26 Left rear turn light failure

27 Right front turn light failure

28 Right rear turn light failure

35 Replace battery in radio remotecontrol

36 ESC Initialising

No. Vehicle message

49 Lane departure warningunavailable

52 Change timing belt

56 Tyre pressure imbalance onfront axle

57 Tyre pressure imbalance onrear axle

59 Open, then close driver window

60 Open, then close frontpassenger window

61 Open, then close left rearwindow

62 Open, then close right rearwindow

65 Theft attempted

66 Service anti-theft alarm system

67 Service steering wheel lock

68 Service power steering

75 Service air conditioning

No. Vehicle message

77 Service lane departure warning

79 Top up engine oil

81 Service transmission / trans‐mission malfunction

82 Change engine oil soon

84 Engine power reduced

89 Service vehicle soon

90 Service brake assist

95 Service airbag

145 Check washer fluid level

151 Press clutch to start

174 Low vehicle battery

258 Parking assist off

Vehicle messages onColour Info DisplaySome important messages appearadditionally in theColour Info Display. Some messagesonly pop-up for a few seconds.

Instruments and controls 83

Warning chimesIf several warnings appear at thesame time, only one warning chimewill sound.

When starting the engine or whilstdrivingThe warning chime regardingunfastened seat belts has priorityover any other warning chime.● If seat belt is not fastened.● If a door or the tailgate is not fully

closed when starting off.● If a certain speed is exceeded

with parking brake applied.● If a programmed speed is

exceeded.● If a warning message appears in

the Driver Information Centre orInfo Display.

● If the parking assist detects anobject.

● If unintended lane changeoccurs.

● If a fault in the automatic lockingsystem is detected.

When the vehicle is parked and/orthe driver's door is opened● With exterior lights on.

During an Autostop● If the driver's door is opened.

Battery voltageWhen the vehicle battery voltage isrunning low, the warning code 174 willappear in the Driver InformationCentre.1. Switch off immediately any

electrical consumers which arenot required for a safe drive, e.g.seat heating, heated windscreenand heated rear window or othermain consumers.

2. Charge the vehicle battery bydriving continuously for a while orby using a charging device.

The warning code will disappear afterthe engine has been started twiceconsecutively without a voltage drop.If the vehicle battery cannot berecharged, have the cause of the faultremedied by a workshop.

Vehicle personalisationThe vehicle's behaviour can bepersonalised by changing the settingsin the Info Display.Some of the personal settings fordifferent drivers can be memorisedindividually for each vehicle key.Memorised settings 3 22.Depending on vehicle equipment andcountry-specific regulations some ofthe functions described below maynot be available.Some functions are only displayed oractive when the engine is running.

Personal settingsGraphic Info DisplayPress MENU, when ignition is on andinfotainment system is activated.Turn the MENU button to scrollthrough the menu list. Press MENU toselect the respective menu. To closea menu or to go back to previouspage, press BACK.Select Settings, scroll through the listand select Vehicle Settings

84 Instruments and controls

In the corresponding submenus thefollowing settings can be changed:

Vehicle Settings● Park Assist / Collision Detection

Park Assist: Activates ordeactivates the parking assist.

● Comfort SettingsChime Volume: Changes thevolume of warning chimes.Personalisation by Driver:Activates or deactivates thepersonalisation function.Rear Auto Wipe in Reverse:Activates or deactivatesautomatic switching on of the

rear window wiper when reversegear is engaged.

● Languages: Scroll through the listand select the desired language.

● LightingExterior lighting by unlocking:Activates or deactivates the entrylighting.Exit Lighting: Activates ordeactivates exit lighting andchanges lighting duration.

● Power Door LocksStop door lock if door open:Activates or deactivates the doorlocking function while a door isopen.Delayed Door Lock: Activates ordeactivates the delayed doorlocking function. This featuredelays the actual locking of thedoors until all doors are closed.

● Remote Lock, Unlock, and StartRemote Unlock Feedback:Activates or deactivates thehazard warning flasher feedbackwhilst unlocking.

Remote Lock Feedback:Changes what kind of feedbackis given when locking the vehicle.Remote Door Unlock: Changesthe configuration to unlock onlythe driver's door or the wholevehicle whilst unlocking.Auto Relock Doors: Activates ordeactivates the automatic relockfunction after unlocking withoutopening the vehicle.

● Restore Factory Settings:Resets all settings to the defaultsettings.

● Valet Mode:Activated, all vehicle displays arelocked and no changes may beperformed within the system.See Infotainment manual.

Personal settings7" Colour Info DisplayPress ;, select Settings and thenVehicle on the Info Display.

Instruments and controls 85

In the corresponding submenus thefollowing settings can be changed:

Settings● Climate & Air Quality

Auto Fan Max Speed: Modifiesthe level of the cabin airflow of theclimate control in automaticmode.Air Conditioning Mode: Controlsthe state of the coolingcompressor when the vehicle isstarted. Last setting(recommended) or at vehiclestart is either always on or alwaysoff.

Auto Defog: Supportswindscreen dehumidification byautomatically selecting thenecessary settings andautomatic air conditioning mode.Auto Rear Defog: Automaticallyactivates heated rear window.

● Collision / Detection SystemsRear View Camera Guidelines:Activates or deactivates the rearview camera guidelines on theInfo Display.Park Assist: Activates ordeactivates the parking assist.

● Comfort and ConvenienceChime Volume: Changes thevolume of warning chimes.Personalization By Driver:Activates or deactivates thepersonalisation function.Auto Wipe in Reverse Gear:Activates or deactivatesautomatic switching on of therear window wiper when reversegear is engaged.

● LightingExit Lighting: Activates ordeactivates and changes theduration of exit lighting.

● Power Door LocksUnlocked Door Anti Lock Out:Activates or deactivates the doorlocking function while a door isopen.Delayed Door Lock: Activates ordeactivates the delayed doorlocking function. This featuredelays the actual locking of thedoors until all doors are closed.

● Remote Lock, Unlock, StartRemote Unlock Light Feedback:Activates or deactivates thehazard warning flasher feedbackwhilst unlocking.Remote Door Unlock: Changesthe configuration to unlock onlythe driver's door or the wholevehicle whilst unlocking.Relock Remotely UnlockedDoors: Activates or deactivatesthe automatic relock functionafter unlocking without openingthe vehicle.

86 Instruments and controls

Telematics serviceOnStarOnStar is a personal connectivity andservice assistant with integratedWi-Fi hotspot. The OnStar service isavailable 24 hours a day, seven daysa week.NoteOnStar is not available for allmarkets. For further information,contact your workshop.NoteIn order to be available andoperational, OnStar needs a validOnStar subscription, functioningvehicle electrics, mobile service andGPS satellite link.

To activate the OnStar services andset up an account, press Z and speakwith an advisor.

Depending on the equipment of thevehicle, the following services areavailable:● Emergency services and support

in the case of a vehiclebreakdown

● Wi-Fi hotspot● Smartphone application● Remote control, e.g. location of

the vehicle, activation of horn andlights, control of central lockingsystem

● Stolen vehicle assistance● Vehicle diagnostics● Destination downloadNoteThe OnStar module of the vehicle isdeactivated after ten days without anignition cycle. Functions requiring adata connection will be availableagain after switching on the ignition.

OnStar buttons

Privacy buttonPress and hold j until a message isheard to activate or deactivate thetransmission of the vehicle location.Press j to answer a call or to end acall to an advisor.Press j to access the Wi-Fi settings.

Service buttonPress Z to establish a connection toan advisor.

Instruments and controls 87

SOS buttonPress [ to establish a priorityemergency connection to a speciallytrained emergency advisor.

Status LEDGreen: The system is ready withactivated transmission of the vehiclelocation.Green flashing: The system is on acall.Red: A problem arose.Off: The system is ready withdeactivated transmission of thevehicle location or the system is instandby mode.Red / green flashing for a short periodof time: The transmission of thevehicle location has beendeactivated.

OnStar services

General servicesIf you need any information e.g.opening hours, points of interest anddestinations or if you need anysupport e.g. in the case of a vehicle

breakdown, a flat tyre and empty fueltank, press Z to establish aconnection to an advisor.

Emergency servicesIn the case of an emergency situation,press [ and talk to an advisor. Theadvisor then contacts emergency orassistance service providers anddirects them to your vehicle.In the case of an accident withactivation of airbags or belttensioners, an automatic emergencycall is established. The advisor isimmediately connected to yourvehicle to see whether help isneeded.

Wi-Fi hotspotThe Wi-Fi hotspot of the vehicleprovides internet connectivity with amaximum speed of 4G/LTE.NoteThe Wi-Fi hotspot functionality is notavailable for all markets.NoteSome mobile devices connect to Wi-Fi hotspots automatically and usemobile data capacity in the

background, even if they are not inuse. This includes automaticupdates, downloads, as well asprogramme or app synchronisationtraffic. The data volume purchasedvia OnStar might be consumedrapidly. Turn off automaticsynchronisations in the settings ofyour device.

Up to seven devices may beconnected.To connect a mobile device with theWi-Fi hotspot:1. Press j and then select Wi-Fi

settings on the Info Display. Thesettings displayed include the Wi-Fi hotspot name (SSID),password and connection type.

2. Start a Wi-Fi network search onyour mobile device.

3. Select your vehicle hotspot(SSID) when listed.

4. When prompted, enter thepassword on your mobile device.

88 Instruments and controls

NoteTo change the SSID or password,press Z and talk to an advisor or login to your account.

To switch off the Wi-Fi hotspotfunctionality, press Z to call anadvisor.

Smartphone appWith the myOpel smartphone app,some vehicle functions can beoperated remotely.The following functions are available:● Lock or unlock vehicle.● Honk horn or flash lights.● Check fuel level, engine oil life

and tyre pressure (only with tyrepressure monitoring system).

● Send navigation destination tothe vehicle, if equipped with abuilt-in navigation system.

● Locate vehicle on a map.● Manage Wi-Fi settings.

To operate these functions, downloadthe app from App Store® orGoogle Play™ Store.

Remote controlIf desired, use any phone to call anadvisor, who can remotely operatespecific vehicle functions. Find therespective OnStar phone number onour country-specific website.The following functions are available:● Lock or unlock vehicle.● Provide information on the

vehicle location.● Honk horn or flash lights.

Stolen vehicle assistanceIf the vehicle is stolen, report the theftto the authorities and request OnStarstolen vehicle assistance. Use anyphone to call an advisor. Find therespective OnStar phone number onour country-specific website.OnStar can provide support inlocating and recovering the vehicle.Theft alertWhen the anti-theft alarm system istriggered, a notification is sent toOnStar. You are then informed aboutthis event by text message or email.

Restart preventionBy sending remote signals, OnStarcan prevent the vehicle fromrestarting once it has been turned off.

On-demand diagnosticsAt any time e.g. if the vehicle displaysa vehicle message, press Z tocontact an advisor and ask tocomplete a real-time diagnostic checkto directly determine the issue.Depending on the results, the advisorwill provide further support.

Diagnostic reportThe vehicle automatically transmitsdiagnostic data to OnStar whichsends a monthly email report to youand your preferred workshop.NoteThe workshop notification functioncan be disabled in your account.

The report contains the status of keyoperating systems of the vehicle likeengine, transmission, airbags, ABS,and other major systems. It alsoprovides information on possible

Instruments and controls 89

maintenance items and tyre pressure(only with tyre pressure monitoringsystem).To look at the information in greaterdetail, select the link within the emailand log in to your account.

Destination downloadA desired destination can be directlydownloaded to the navigation system.Press Z to call an advisor anddescribe the destination or point ofinterest.The advisor can look up any addressor point of interest and directly sendthe destination to the built-innavigation system.

OnStar settings

OnStar PINTo have full access to all OnStarservices, a four-digit PIN is required.The PIN has to be personalised whenfirst talking to an advisor.To change the PIN, press Z to call anadvisor.

Account dataAn OnStar subscriber has an accountwhere all the data is stored. Torequest a change of the accountinformation, press Z and talk to anadvisor or log in to your account.If the OnStar service is used onanother vehicle, press Z and requestthat the account be transferred to thenew vehicle.NoteIn any case, if the vehicle is disposedof, sold or otherwise transferred,immediately inform OnStar aboutthe changes and terminate theOnStar service on this vehicle.

Vehicle locationThe vehicle location is transmitted toOnStar when service is requested ortriggered. A message on the InfoDisplay informs about thistransmission.To activate or deactivate thetransmission of the vehicle location,press and hold j until an audiomessage is heard.

The deactivation is indicated by thestatus light flashing red and green fora short period of time and each timethe vehicle is started.NoteIf the transmission of the vehiclelocation is deactivated, someservices are no longer available.NoteThe vehicle location always remainsaccessible to OnStar in the case ofan emergency.

Find the privacy policy in youraccount.

Software updatesOnStar may remotely carry outsoftware updates without furthernotice or consent. These updates areto enhance or maintain safety andsecurity or the operation of thevehicle.These updates may concern privacyissues. Find the privacy policy in youraccount.

90 Lighting

Lighting

Exterior lighting ............................ 90Light switch ................................ 90High beam ................................. 90Headlight flash ........................... 90Headlight range adjustment ...... 91Headlights when drivingabroad ...................................... 91

Daytime running lights ............... 91Cornering lights ......................... 91Hazard warning flashers ............ 91Turn lights .................................. 92Front fog lights ........................... 92Rear fog light ............................. 92Parking lights ............................. 93Reversing lights ......................... 93Misted light covers ..................... 93

Interior lighting ............................. 93Instrument panel illuminationcontrol ....................................... 93

Interior lights .............................. 94Reading lights ............................ 94

Lighting features .......................... 94Exit lighting ................................ 94Battery discharge protection ...... 95

Exterior lightingLight switch

Turn light switch:7 : lights off8 : sidelights9 : headlights

Control indicator 8 3 74.

Tail lightsTail lights are illuminated togetherwith headlights and sidelights.

High beam

To switch from low to high beam,push stalk.To switch to low beam, push stalkagain or pull.

Headlight flashTo activate the headlight flash, pullstalk.

Lighting 91

Headlight range adjustmentManual headlight rangeadjustment

To adapt headlight range to thevehicle load to prevent dazzling: turnthumb wheel ? to required position.0 : front seats occupied1 : all seats occupied2 : all seats occupied and load

compartment laden3 : driver's seat occupied and load

compartment laden

Headlights when drivingabroadHeadlight aim has been preset andshould need no further adjustment.When driving in countries withopposite hand traffic, it is notnecessary to adjust the headlights.

Daytime running lightsDaytime running light increasesvisibility of the vehicle during daylight.They are switched on automaticallywhen ignition is on.

Cornering lights

On tight bends or when turning off,depending on the steering angle orthe indicator light signal, an additionalleft or right reflector is switched on

which illuminates the road in thedirection of travel. It is activated up toa speed of 40 km/h.

Hazard warning flashers

Operated by pressing ¨.In the event of an accident with airbagdeployment, the hazard warningflashers are activated automatically.

92 Lighting

Turn lights

stalk up : right turn lightstalk down : left turn light

A resistance point can be felt whenmoving the stalk.Constant flashing is activated whenthe stalk is being moved beyond theresistance point. It is deactivatedwhen the steering wheel is moved inthe opposite direction or stalk ismanually moved back to its neutralposition.

Activate temporary flashing byholding the stalk just before theresistance point. Turn lights will flashuntil stalk is being released.To activate three flashes, tap the stalkbriefly without passing the resistancepoint.

Front fog lights

Operated by pressing >.

Rear fog light

Operated by pressing r.Light switch in position 8: Rear foglight can only be switched on withfront fog lights.

Lighting 93

Parking lights

When the vehicle is parked, theparking lights on one side can beactivated:1. Switch off the ignition.2. Move the stalk all the way up (right

parking lights) or down (leftparking lights).

Activation is confirmed by an acousticsignal and the corresponding turnlight control indicator.

Reversing lightsThe reversing light comes on whenthe ignition is on and reverse gear isselected.

Misted light coversThe inside of the light housing maymist up briefly in poor, wet and coldweather conditions, in heavy rain orafter washing. The mist disappearsquickly by itself; to help switch on theheadlights.

Interior lightingInstrument panelillumination control

Brightness of the following lights canbe adjusted when the exterior lightsare on:● instrument panel illumination● Info Display● illuminated switches and

operation elementsTurn thumb wheel A and hold untilthe desired brightness is obtained.

94 Lighting

Interior lightsWhen opening a door, the courtesylight automatically switches on andthen off after a delay.When exterior lighting has been on,courtesy light will turn on whenignition is switched off.NoteIn the event of an accident withairbag deployment, the courtesylights are turned on automatically.

Courtesy light

Operate rocker switch:centreposition w

: automatic switching onwhen opening a door,turns off after a delay

press d : permanently onpress K : permanently off

Reading lights

Operated by pressing the buttons infront.

Lighting featuresExit lightingPath lightingHeadlights, tail lights and numberplate lights illuminate the surroundingarea for an adjustable time afterleaving the vehicle.

Activating

1. Switch off the ignition.2. Remove the ignition key.3. Open driver's door.

Lighting 95

4. Pull the stalk.5. Close the driver's door.

If the driver's door is not closed thelights switch off after 2 minutes.Exit lighting is switched offimmediately if the stalk is pulled whilethe driver's door is open.Activation, deactivation and durationof this function can be changed in theInfo Display.Vehicle personalisation 3 83.The settings can be saved for the keybeing used 3 22.

Battery discharge protectionSwitching off electric lightsTo prevent discharge of the vehiclebattery when the ignition is switchedoff, some interior lights are switchedoff automatically after some time.

96 Climate control

Climate control

Climate control systems ............... 96Heating and ventilation system . 96Air conditioning system ............. 97Electronic climate controlsystem ...................................... 99

Air vents ..................................... 102Adjustable air vents ................. 102Fixed air vents ......................... 103

Maintenance .............................. 103Air intake ................................. 103Air conditioning regularoperation ................................ 103

Service .................................... 103

Climate control systemsHeating and ventilationsystem

Controls for:● temperature● fan speed● air distribution4 : air recirculationÜ : heated rear window

Heated rear window Ü 3 32.Heated exterior mirrors Ü 3 29.Heated seats ß 3 37.

Heated steering wheel * 3 60.

TemperatureAdjust the temperature by turning thetemperature control.red : warmblue : cold

Heating will not be fully effective untilthe engine has reached normaloperating temperature.

Fan speedAdjust the air flow by switching the fanto the desired speed.

Air distributionM : to head area via adjustable air

ventsL : to head area and foot wellK : to foot well, with a small amount

of air being directed towindscreen and front doorwindows

J : to windscreen and foot well,with a small amount of air beingdirected to front door windows

V : to windscreen and front doorwindows

Climate control 97

Intermediate settings are possible.

Demisting and defrosting thewindows● Set air distribution control to V.● Set temperature control to

warmest level.● Set fan speed to highest speed.● Switch on heated rear window Ü.● Open side air vents as required

and direct them towards doorwindows.

● For simultaneous warming of thefoot well, set air distributioncontrol to J.

Air conditioning system

Controls for:● temperature● fan speed● air distribution

A/C : cooling4 : air recirculationÜ : heated rear window

Heated rear window Ü 3 32.Heated exterior mirrors Ü 3 29.Heated seats ß 3 37.Heated steering wheel * 3 60.

TemperatureAdjust the temperature by turning thetemperature control.red : warmblue : cold

Heating will not be fully effective untilthe engine has reached normaloperating temperature.

Fan speedAdjust the air flow by switching the fanto the desired speed.

Air distributionM : to head area via adjustable air

ventsL : to head area and foot wellK : to foot well, with a small amount

of air being directed towindscreen and front doorwindows

98 Climate control

J : to windscreen and foot well,with a small amount of air beingdirected to front door windows

V : to windscreen and front doorwindows (air conditioning isactivated in the background tohelp preventing windows fromfogging)

Intermediate settings are possible.

Cooling A/CPress A/C to switch on cooling. TheLED in the button illuminates toindicate activation. Cooling is onlyfunctional when the engine is runningand climate control fan is switched on.Press A/C again to switch off cooling.The air conditioning system cools anddehumidifies (dries) as soon as theoutside temperature is slightly abovethe freezing point. Thereforecondensation may form and drip fromunder the vehicle.If no cooling or drying is required,switch off the cooling system for fuelsaving reasons.Activated cooling may inhibitAutostops.

Stop-start system 3 107.

Air recirculation system 4Press 4 to activate air recirculationmode. The LED in the buttonilluminates to indicate activation.Press 4 again to deactivate airrecirculation mode.

9 Warning

Driving with recirculation mode fora prolonged period of time canmake you sleepy. Periodically turnto the outside air mode for freshair.The exchange of fresh air isreduced in air recirculation mode.In operation without cooling the airhumidity increases, so thewindows may mist up. The qualityof the passenger compartment airdeteriorates, which may cause thevehicle occupants to feel drowsy.

In warm and very humid ambient airconditions, the windscreen may mistup from outside, when cold air is

directed towards it. If windscreenmists up from outside, activatewindscreen wiper and deactivate V.

Maximum coolingBriefly open the windows so that hotair can disperse quickly.● Switch on cooling A/C.● Switch on Air recirculation

system 4.● Set temperature control to

coldest level.● Set fan speed to highest level.● Set air distribution control to M.● Open all vents.

Demisting and defrosting thewindows V● Set air distribution control to V.● Set temperature control to

warmest level.● Set fan speed to highest level.● Switch on heated rear window Ü.● Open side air vents as required

and direct them towards the doorwindows.

Climate control 99

If air distribution is set to V, A/Coperates and air recirculation modewill be set to demisting / defrostingregardless of indicator status.NoteIf V is pressed while the engine isrunning, an Autostop will be inhibiteduntil V is pressed again.If V is pressed while the engine isin an Autostop, the engine will restartautomatically.

Stop-start system 3 107.

Electronic climate controlsystem

Controls for:● temperature● air distribution● fan speed

A/C : coolingAUTO : automatic mode4 : manual air recirculationV : demisting and defrostingÜ : heated rear window

Heated rear window Ü 3 32.Heated exterior mirrors Ü 3 29.Heated seats ß 3 37.Heated steering wheel * 3 60.Climate control settings are shown onthe Info Display. Setting modificationsare briefly popped-up, superimposedover the currently displayed menu.The electronic climate control systemis only fully operational when theengine is running.Heating will not be fully effective untilthe engine has reached normaloperating temperature.

Automatic mode AUTOThe system automatically controls thefan speed, air delivery, airconditioning, and recirculation inorder to heat or cool the vehicle to thedesired temperature.When the AUTO indicator light is on,the system is in full automaticoperation.If the air delivery mode, fan speed,recirculation, or air conditioningsetting is adjusted, the AUTOindicator turns off.To improve fuel efficiency and to coolthe vehicle faster, recirculation maybe automatically selected in warmweather. The recirculation light willnot come on. Press 4 to selectrecirculation; press it again to selectoutside air.To turn off the system, press power m.

100 Climate control

Basic setting for maximum comfort:● Press AUTO. The LED in the

button illuminates to indicateactivation.

● Open all air vents to allowoptimised air distribution inAutomatic mode.

● Set the preselected temperature.Recommended temperature is22 °C.

Temperature preselectionSet temperature to the desired value.It is indicated on the display in thetemperature control.For reasons of comfort, changetemperature only in small increments.If the minimum temperature Lo is set,the climate control system runs atmaximum cooling, if cooling A/C isactive.If the maximum temperature Hi is set,the climate control system runs atmaximum heating.Recommended temperature is 22 °C.

NoteIf A/C is switched on, reducing theset cabin temperature can cause theengine to restart from an Autostop orinhibit an Autostop.

Stop-start system 3 107.

Demisting and defrosting thewindows V● Press V. The LED in the button

illuminates to indicate activation.● Temperature and air distribution

are set automatically and the fanruns at high speed.

● Switch on heated rear window Ü.● To return to previous mode:

press V. To return to Automaticmode: press AUTO.

NoteIf V is pressed while the engine isrunning, an Autostop will be inhibiteduntil V is pressed again.If V is pressed while the engine isin an Autostop, the engine will restartautomatically.

Stop-start system 3 107.

Air recirculation system 4Press 4 to activate air recirculationmode. The LED in the buttonilluminates to indicate activation.Press 4 again to deactivate airrecirculation mode.

9 Warning

Driving with recirculation mode fora prolonged period of time canmake you sleepy. Periodically turnto the outside air mode for freshair.The exchange of fresh air isreduced in air recirculation mode.In operation without cooling the airhumidity increases, so thewindows may mist up. The qualityof the passenger compartment airdeteriorates, which may cause thevehicle occupants to feel drowsy.

In warm and very humid ambient airconditions, the windscreen may mistup from outside, when cold air isdirected towards it. If windscreenmists up from outside, activatewindscreen wiper and deactivate V.

Climate control 101

Manual settingsClimate control system settings canbe changed by activating the buttonsand rotary knobs as follows.Changing a setting will deactivateAutomatic mode.

Fan speed Z

Adjust the air flow by switching the fanto the desired speed. The selectedfan speed is indicated by the numberof segments in the display. If the fanis switched off the air conditioning isalso deactivated.To return to Automatic mode: PressAUTO.

Air distribution

Press appropriate button for desiredadjustment. Activation is indicated bythe LED in the button.M : to head areaL : to head area and foot wellK : to foot well, with a small amount

of air being directed towindscreen and front doorwindows

J : to windscreen and foot well,with a small amount of air beingdirected to front door windows

V : to windscreen and front doorwindows (air conditioning isactivated in the background tohelp preventing windows fromfogging)

To return to Automatic mode: PressAUTO.

Cooling A/C

Press A/C to switch on cooling. TheLED in the button illuminates toindicate activation. Cooling is onlyfunctional when the engine is runningand climate control fan is switched on.

102 Climate control

Press A/C again to switch off cooling.The air conditioning system cools anddehumidifies (dries) as soon as theoutside temperature is slightly abovethe freezing point. Thereforecondensation may form and drip fromunder the vehicle.If no cooling or drying is required,switch off the cooling system for fuelsaving reasons.Activated cooling might inhibitAutostops.Stop-start system 3 107.

Air recirculation mode 4Press 4 to activate air recirculationmode. The LED in the buttonilluminates to indicate activation.Press 4 again to deactivate airrecirculation mode.

9 Warning

The exchange of fresh air isreduced in air recirculation mode.In operation without cooling, theair humidity increases, so the

windows may mist up from inside.The quality of the passengercompartment air deteriorates,which may cause the vehicleoccupants to feel drowsy.

In warm and very humid ambient airconditions, the windscreen may mistup from outside when cold air isdirected towards it. If windscreenmists up from outside, activatewindscreen wiper.

Maximum coolingBriefly open the windows so that hotair can disperse quickly.● Switch on cooling A/C.● Switch on Air recirculation

system 4.● Set temperature control to

coldest level.● Set fan speed to highest level.● Set air distribution control to M.● Open all vents.

Air ventsAdjustable air ventsAt least one air vent must be openwhile the cooling is on.

Direct the flow of air by tilting the slats.

9 Warning

Do not attach any objects to theslats of the air vents. Risk ofdamage and injury in case of anaccident.

Climate control 103

Fixed air ventsAdditional air vents are locatedbeneath the windscreen and doorwindows and in the foot wells.

MaintenanceAir intake

The air intake in front of thewindscreen in the enginecompartment must be kept clear toallow air intake. Remove any leaves,dirt or snow.

Air conditioning regularoperationIn order to ensure continuouslyefficient performance, cooling mustbe operated for a few minutes once amonth, irrespective of the weatherand time of year. Operation withcooling is not possible when theoutside temperature is too low.

ServiceFor optimal cooling performance, it isrecommended to annually check theclimate control system, startingthree years after initial vehicleregistration, including:● functionality and pressure test● heating functionality● leakage check● check of drive belts● cleaning of condenser and

evaporator drainage● performance checkNoteRefrigerant R-134a containsfluorinated greenhouse gases.

104 Driving and operating

Driving andoperating

Driving hints ............................... 104Control of the vehicle ............... 104Steering ................................... 105

Starting and operating ............... 105New vehicle running-in ............ 105Ignition switch positions ........... 105Retained power off .................. 106Starting the engine .................. 107Overrun cut-off ........................ 107Stop-start system .................... 107Parking .................................... 109

Engine exhaust .......................... 110Catalytic converter ................... 110

Manual transmission .................. 111Brakes ........................................ 112

Antilock brake system ............. 112Parking brake .......................... 113Brake assist ............................. 113Hill start assist ......................... 113

Ride control systems ................. 114Traction Control system .......... 114Electronic Stability Control ...... 115City mode ................................ 115

Driver assistance systems ......... 117Cruise control .......................... 117Speed limiter ........................... 118Parking assist .......................... 119Lane departure warning .......... 121

Fuel ............................................ 122Fuel for petrol engines ............. 122Refuelling ................................ 123

Driving hintsControl of the vehicleNever coast with engine notrunningMany systems will not function in thissituation (e.g. brake servo unit, powersteering). Driving in this manner is adanger to yourself and others.All systems function during anAutostop.Stop-start system 3 107.

Idle boostIf charging of the vehicle battery isrequired due to battery condition, thepower output of the generator mustbe increased. This will be achieved byan idle boost which may be audible.A message appears in the DriverInformation Centre.

PedalsTo ensure the pedal travel isuninhibited, there must be no mats inthe area of the pedals.

Driving and operating 105

Use only floor mats, which fit properlyand are fixed by the retainers on thedriver side.

Driving downhillEngage a gear when driving downhillto ensure that sufficient brakepressure is available.

SteeringIf power steering assist is lostbecause the engine stops or due to asystem malfunction, the vehicle canbe steered but may require increasedeffort.Control indicator c 3 72.

Caution

Vehicle equipped with electricpower steering:If the steering wheel is turned untilit reaches the end of its travel andis held against that position for anextended period of time, powersteering assistance may bereduced.

If the steering assistance is usedfor an extended period of time,power assistance may bereduced.Power steering assistance shouldreturn back to normal when thesystem has cooled down.

Starting and operatingNew vehicle running-inDo not brake unnecessarily hard forthe first few journeys.During the first drive, smoke mayoccur because of wax and oilevaporating off the exhaust system.Park the vehicle in the open for awhile after the first drive and avoidinhaling the fumes.During the running-in period, fuel andengine oil consumption may behigher.Autostop may be inhibited to allow forcharging of the vehicle battery.

Ignition switch positionsTurn key:

106 Driving and operating

0 : ignition off: Some functionsremain active until key isremoved or driver's door isopened, provided the ignition wason previously

1 : accessory power mode: Steeringwheel lock released, someelectrical functions are operable,ignition is off

2 : ignition on power mode: Ignitionis on. Control indicatorsilluminate and most electricalfunctions are operable. To turnthe key from position 2 to 1 or 0,first push the key all the way intowards the steering column

3 : engine start: Release key afterstarting procedure begins

To turn off the vehicle:1. Make sure the vehicle is stopped.

2. Push the key all the way intowards the steering column, thenturn the key to position 0.

3. Remove the key.4. Apply the parking brake.

Steering wheel lockThe steering wheel is automaticallylocked when the key is removed.

9 Danger

Never remove the key fromignition switch during driving asthis will cause steering wheel lock.

Retained power offThe following electronic systems areoperable until the driver's door isopened or at the latest for10 minutes after the ignition isswitched off:● power windows● power outlets● power sunroof

Power to the Infotainment system willcontinue to operate for 30 minutes oruntil the key is removed from theignition switch, regardless of whetherany door is opened.

Driving and operating 107

Starting the engine

Turn key to position 1 to release thesteering wheel lock.Operate clutch and brake pedal.Do not operate the accelerator pedal.Turn key briefly to position 3 andrelease: an automatic procedureoperates the starter after a briefdelay, until the engine is running. See"Automatic Starter Control".Before restarting or to switch off theengine, turn the key back to position0.

During an Autostop, the engine canbe started by depressing the clutchpedal.

Starting the vehicle at lowtemperaturesThe start of the engine withoutadditional heaters is possible down to-30 °C.Required is an engine oil with thecorrect viscosity, the correct fuel,performed services and a sufficientlycharged vehicle battery.

Automatic starter controlThis function controls the enginestarting procedure. The driver doesnot need to hold the key in position 3.Once applied, the system will go onstarting automatically until the engineis running. Because of the checkingprocedure, the engine starts runningafter a short delay.Possible reasons for a non-startingengine:● clutch pedal not operated● timeout occurred

Turbo engine warm-upUpon start-up, engine availabletorque may be limited for a short time,especially when the enginetemperature is cold. The limitation isto allow the lubrication system to fullyprotect the engine.

Overrun cut-offThe fuel supply is automatically cut offduring overrun, i.e. when the vehicleis driven with a gear engaged butaccelerator is released.Depending on driving conditions, theoverrun cut-off may be deactivated.

Stop-start systemThe stop-start system helps to savefuel and to reduce the exhaustemissions. When conditions allow, itswitches off the engine as soon as thevehicle is at a low speed or at astandstill, e.g. at a traffic light or in atraffic jam.The engine is started automatically assoon as the clutch is depressed.

108 Driving and operating

A vehicle battery sensor ensures thatan Autostop is only performed if thevehicle battery is sufficiently chargedfor a restart.

ActivationThe stop-start system is available assoon as the engine is started, thevehicle starts-off and the conditionsas stated below in this section arefulfilled.

Deactivation

Deactivate the stop-start systemmanually by pressing Ï. Thedeactivation is indicated when theLED in the button extinguishes.

AutostopIf the vehicle is at a low speed or at astandstill, activate an Autostop asfollows:● Depress the clutch pedal.● Set the lever in neutral.● Release the clutch pedal.

The engine will be switched off whilethe ignition stays on.

Indication

An Autostop is indicated by theneedle at the AUTOSTOP position inthe tachometer.

During an Autostop, the heating andbrake performance will bemaintained.

Conditions for an AutostopThe stop-start system checks if eachof the following conditions is fulfilled:● The stop-start system is not

manually deactivated.● The bonnet is fully closed.● The driver's door is closed or the

driver's seat belt is fastened.● The vehicle battery is sufficiently

charged and in good condition.● The engine is warmed-up.● The engine coolant temperature

is not too high.● The engine exhaust temperature

is not too high, e.g. after drivingwith high engine load.

● The ambient temperature isabove -5 °C.

● The climate control systemallows an Autostop.

Driving and operating 109

● The brake vacuum is sufficient.● The vehicle was driven at least at

walking speed since the lastAutostop.

Otherwise an Autostop will beinhibited.Certain settings of the climate controlsystem may inhibit an Autostop. See"Climate control" chapter for furtherinformation 3 99.Immediately after motorway drivingan Autostop may be inhibited.New vehicle running-in 3 105.

Vehicle battery discharge protectionTo ensure reliable engine restarts,several vehicle battery dischargeprotection features are implementedas part of the stop-start system.

Power saving measuresDuring an Autostop, several electricalfeatures, e.g., the rear windowheating, are disabled or switched intoa power saving mode. The fan speedof the climate control system isreduced to save power.

Restart of the engine by the driverDepress the clutch pedal to restart theengine.If the selector lever is shifted out ofneutral before depressing the clutchpedal first, control indicator -illuminates or is shown as a symbol inthe Driver Information Centre.Control indicator - 3 71.

Restart of the engine by the stop-start systemThe selector lever must be in neutralto enable an automatic restart.If one of the following conditionsoccurs during an Autostop, theengine will be restarted automaticallyby the stop-start system:● The stop-start system is

manually deactivated.● The bonnet is opened.● The driver's seat belt is

unfastened and the driver's dooris opened.

● The engine temperature is toolow.

● The charging level of the vehiclebattery is below a defined level.

● The brake vacuum is notsufficient.

● The vehicle is driven at least atwalking speed.

● The climate control systemrequests an engine start.

● The air conditioning is manuallyswitched on.

If the bonnet is not fully closed, awarning message is displayed in theDriver Information Centre.If an electrical accessory, e.g. aportable CD player, is connected tothe power outlet, a brief power dropduring restart might be noticeable.

Parking

9 Warning

● Do not park the vehicle on aneasily ignitable surface. Thehigh temperature of theexhaust system could ignite thesurface.

110 Driving and operating

● Always apply the parkingbrake. Activate the manualparking brake without pressingthe release button. Apply asfirmly as possible on a downhillslope or uphill slope. Depressbrake pedal at the same time toreduce operating force.

● Switch off the engine.● If the vehicle is on a level

surface or uphill slope, engagefirst gear before removing theignition key. On an uphill slope,turn the front wheels away fromthe kerb.If the vehicle is on a downhillslope, engage reverse gearbefore removing the ignitionkey. Turn the front wheelstowards the kerb.

● Close the windows and thesunroof.

● Remove the ignition key fromthe ignition switch. Turn thesteering wheel until thesteering wheel lock is felt toengage.

● Lock the vehicle.● Activate the anti-theft alarm

system.● The engine cooling fans may run

after the engine has beenswitched off 3 128.

Caution

After running at high enginespeeds or with high engine loads,operate the engine briefly at a lowload or run in neutral forapprox. 30 seconds beforeswitching off, in order to protectthe turbocharger.

NoteIn the event of an accident withairbag deployment, the engine isswitched off automatically if thevehicle comes to a standstill within acertain time.

Engine exhaust

9 Danger

Engine exhaust gases containpoisonous carbon monoxide,which is colourless and odourlessand could be fatal if inhaled.If exhaust gases enter the interiorof the vehicle, open the windows.Have the cause of the faultrectified by a workshop.Avoid driving with an open loadcompartment, otherwise exhaustgases could enter the vehicle.

Catalytic converterThe catalytic converter reduces theamount of harmful substances in theexhaust gases.

Driving and operating 111

Caution

Fuel grades other than those listedon pages 3 122, 3 171 coulddamage the catalytic converter orelectronic components.Unburnt petrol will overheat anddamage the catalytic converter.Therefore avoid excessive use ofthe starter, running the fuel tankdry and starting the engine bypushing or towing.

In the event of misfiring, unevenengine running, a reduction in engineperformance or other unusualproblems, have the cause of the faultrectified by a workshop as soon aspossible. In an emergency, drivingcan be continued for a short period,keeping vehicle speed and enginespeed low.

Manual transmission

To engage reverse, depress theclutch pedal and engage the reversegear.If the gear does not engage, set thelever to neutral, release the clutchpedal and depress again; then repeatgear selection.Do not slip the clutch unnecessarily.When operating, depress the clutchpedal completely. Do not use thepedal as a foot rest.

Caution

It is not advisable to drive with thehand resting on the selector lever.

Upshift indication 3 72.Stop-start system 3 107.

112 Driving and operating

BrakesThe brake system comprises twoindependent brake circuits.If a brake circuit fails, the vehicle canstill be braked using the other brakecircuit. However, braking effect isachieved only when the brake pedalis depressed firmly. Considerablymore force is needed for this. Thebraking distance is extended. Seekthe assistance of a workshop beforecontinuing the journey.When the engine is not running, thesupport of the brake servo unitdisappears once the brake pedal hasbeen depressed once or twice.Braking effect is not reduced, butbraking requires significantly greaterforce. It is especially important to bearthis in mind when being towed.Control indicator R 3 71.

Antilock brake systemAntilock brake system (ABS)prevents the wheels from locking.

ABS starts to regulate brake pressureas soon as a wheel shows a tendencyto lock. The vehicle remainssteerable, even during hard braking.ABS control is made apparentthrough a pulse in the brake pedaland the noise of the regulationprocess.For optimum braking, keep the brakepedal fully depressed throughout thebraking process, despite the fact thatthe pedal is pulsating. Do not reducethe pressure on the pedal.After starting-off the system performsa self-test which may be audible.Control indicator u 3 72.

Adaptive brake lightDuring full braking, all three brakelights flash for the duration of ABScontrol.

Fault

9 Warning

If there is a fault in the ABS, thewheels may be liable to lock dueto braking that is heavier thannormal. The advantages of ABSare no longer available. Duringhard braking, the vehicle can nolonger be steered and mayswerve.

Have the cause of the fault remediedby a workshop.

Driving and operating 113

Parking brakeManual parking brake

9 Warning

Always apply parking brake firmlywithout operating the releasebutton, and apply as firmly aspossible on a downhill or uphillslope.To release the parking brake, pullthe lever up slightly, press therelease button and fully lower thelever.

To reduce the operating forces ofthe parking brake, depress thebrake pedal at the same time.

Control indicator R 3 71.

Brake assistIf the brake pedal is depressedquickly and forcefully, maximumbrake force is automatically applied(full braking).Maintain steady pressure on thebrake pedal for as long as full brakingis required. Maximum brake force isautomatically reduced when thebrake pedal is released.

Hill start assistThe system helps prevent unintendedmovement when driving away oninclines.When releasing the brake pedal afterstopping on an incline, the brakesremain on for a further 2 seconds. Thebrakes release automatically as soonas the vehicle begins to accelerate orthe 2 seconds holding time is over.

The hill start assist is only active whenthe engine is running.

114 Driving and operating

Ride control systemsTraction Control systemThe Traction Control system (TC) is acomponent of the Electronic StabilityControl (ESC).TC improves driving stability whennecessary, regardless of the type ofroad surface or tyre grip, bypreventing the drive wheels fromspinning.As soon as the drive wheels start tospin, engine output is reduced andthe wheel spinning the most is brakedindividually. This considerablyimproves the driving stability of thevehicle on slippery road surfaces.

TC is operational after each enginestart as soon as the control indicatorb extinguishes.When TC operates b flashes.

9 Warning

Do not let this special safetyfeature tempt you into taking riskswhen driving.Adapt speed to the roadconditions.

Deactivation

TC can be switched off when spinningof drive wheels is required: press tbriefly.

Control indicator k illuminates.When TC is deactivated, ESCremains active.TC is reactivated by pressing t again.TC is also reactivated the next timethe ignition is switched on.

FaultIf there is a fault in the system thecontrol indicator b illuminatescontinuously and a warning codeappears in the Driver InformationCentre. The system is notoperational.Have the cause of the fault remediedby a workshop.

Driving and operating 115

Electronic Stability ControlElectronic Stability Control (ESC)improves driving stability whennecessary, regardless of the type ofroad surface or tyre grip.As soon as the vehicle starts toswerve (understeer / oversteer),engine output is reduced and thewheels are braked individually.ESC operates in combination with theTraction Control system (TC). Itprevents the drive wheels fromspinning.

ESC is operational after each enginestart as soon as the control indicatorb extinguishes.When ESC operates b flashes.

9 Warning

Do not let this special safetyfeature tempt you into taking riskswhen driving.Adapt speed to the roadconditions.

Control indicator b 3 72.

Deactivation

For very high-performance drivingESC can be deactivated:Press and hold t for a minimum of5 seconds. Control indicator tilluminates.

ESC is reactivated by pressing tagain. If the TC system waspreviously disabled, both TC andESC are reactivated. k and textinguish when TC and ESC arereactivated.ESC is also reactivated the next timethe ignition is switched on.

FaultIf there is a fault in the system, thecontrol indicator b illuminatescontinuously and a warning codeappears in the Driver InformationCentre. The system is notoperational.Have the cause of the fault remediedby a workshop.

City modeCity mode is a feature which enablesincreased steering assistance duringlower speed conditions, e.g. citytraffic or parking. Steering assistanceis increased for greater convenience.

116 Driving and operating

Activation

Press B when engine is running. Thesystem works from standstill up to60 km/h, and also in reverse gear.Above this speed, the systemchanges to normal mode. Whenactivated, City mode engagesautomatically below 60 km/h.An illuminated LED in the City modebutton indicates that the system isactive and a message pops-up in theDriver Information Centre.City mode remains active during anAutostop, but is only operationalwhen the engine is running.Stop-start system 3 107.

DeactivationPress B. The LED in the buttonextinguishes.Each time the engine is started, Citymode is deactivated.

OverloadIf the steering in City mode is heavilyloaded, e.g. in long parkingmanoeuvres or heavy city traffic, thesystem is deactivated for overheatprotection. Steering operates innormal mode until City modeactivates automatically.

Fault

In the event of a fault in the system,control indicator c illuminates.Vehicle messages 3 81.

Driving and operating 117

Driver assistancesystems

9 Warning

Driver assistance systems aredeveloped to support the driverand not to replace the driver'sattention.The driver accepts fullresponsibility when driving thevehicle.When using driver assistancesystems, always take careregarding the current trafficsituation.

Cruise controlThe cruise control can store andmaintain speeds of approx. 25 km/hto 170 km/h. Deviations from thestored speeds may occur whendriving uphill or downhill.For safety reasons, the cruise controlcannot be activated until the brakepedal has been operated once.Activating in first gear is not possible.

Do not use the cruise control if it is notadvisable to maintain a constantspeed.Control indicator m 3 74.

Switching on the system

Press m; control indicator m ininstrument cluster illuminates white.

Activation of the functionalityAccelerate to the desired speed andturn thumb wheel to SET/-, thecurrent speed is stored andmaintained. Control indicator m ininstrument cluster illuminates green.Set speed is indicated on the display.Accelerator pedal can be released.Vehicle speed can be increased bydepressing the accelerator pedal.When the accelerator pedal isreleased, the previously stored speedis resumed.Cruise control remains activatedwhile gearshifting.

Increase speedWith cruise control active, hold thumbwheel turned to RES/+ or briefly turnto RES/+ repeatedly: speedincreases continuously or in smallincrements.Alternatively accelerate to the desiredspeed and store by turning to SET/-.

118 Driving and operating

Reduce speedWith cruise control active, hold thumbwheel turned to SET/- or briefly turn toSET/- repeatedly: speed decreasescontinuously or in small increments.

Deactivation of the functionalityPress y; control indicator m ininstrument cluster illuminates white.Cruise control is deactivated. Laststored speed remains in memory forlater speed resume.Automatic deactivation:● Vehicle speed is below approx.

25 km/h.● The brake pedal is depressed.● The clutch pedal is depressed for

a few seconds.● The selector lever is in N.● Engine speed is in a very low

range.● The Traction Control system or

Electronic Stability Control isoperating.

Resume stored speedTurn thumb wheel to RES/+ at aspeed above 25 km/h. The storedspeed will be obtained.

Switching off the systemPress m, control indicator m ininstrument cluster extinguishes. Thestored speed is deleted.Pressing L to activate the speedlimiter or switching off the ignition alsoswitches off cruise control anddeletes the stored speed.

Speed limiterThe speed limiter prevents exceedinga preset maximum speed.The maximum speed can be set atspeeds above 30 km/h.The driver can only accelerate up tothe preset speed. Deviations from thelimited speed may occur when drivingdownhill.The preset speed limit is displayed inthe Driver Information Centre whenthe system is active.

Switching on the system

Press L. If cruise control has beenactivated before, it is switched offwhen speed limiter is activated andcontrol indicator m extinguishes.

Set speed limitWith speed limiter active, hold thumbwheel turned to RES/+ or briefly turnto RES/+ repeatedly until the desiredmaximum speed is displayed in theDriver Information Centre.Alternatively, accelerate to thedesired speed and briefly turn thumbwheel to SET/-: the current speed is

Driving and operating 119

stored as maximum speed. Speedlimit is displayed in the DriverInformation Centre.

Change speed limitWith speed limiter active, turn thumbwheel to RES/+ to increase or SET/-to decrease the desired maximumspeed.

Exceeding the speed limitWhen exceeding the limited speedwithout driver input, the speed willflash in the Driver Information Centreand a chime sounds during thisperiod.In the event of an emergency, it ispossible to exceed the speed limit bydepressing the accelerator pedalfirmly nearly to the final point.

Release the accelerator pedal andthe speed limiter function isreactivated once a speed lower thanthe limit speed is obtained.

Deactivation of the functionalityPress y: speed limiter is deactivatedand the vehicle can be driven withoutspeed limit.The limited speed will be stored andis indicated in brackets in the DriverInformation Centre. Additionally, acorresponding message appears.

Resume speed limitTurn thumb wheel to RES/+. Thestored speed limit will be obtained.

Switching off the systemPress L, the speed limit indicationextinguishes in the Driver InformationCentre. The stored speed is deleted.By pressing m to activate cruisecontrol, speed limiter is alsodeactivated and the stored speed isdeleted.

By switching off the ignition, speedlimiter is also deactivated, but thespeed limit will be stored for nextspeed limiter activation.

Parking assistRear parking assist

9 Warning

It is the driver who bears fullresponsibility for the parkingmanoeuvre.Always check the surroundingarea while reversing and using therear parking assist system.

120 Driving and operating

The rear parking assist makesparking easier by measuring thedistance between the vehicle andrear obstacles. It informs and warnsthe driver by giving acoustic signalsand display indication.The system has three ultrasonicparking sensors in the rear bumper.

ActivationWhen reverse gear is engaged, thesystem is ready to operateautomatically.

IndicationThe system warns the driver withacoustic signals against potentiallyhazardous obstacles behind thevehicle. The interval between thesounds becomes shorter as thevehicle gets closer to that obstacle.When the distance is less thanapprox. 40 cm, the sound iscontinuous.

DeactivationThe system automatically switchesoff when reverse gear is disengaged.The system might not detect theobstacle when the vehicle is drivenabove 10 km/h.

FaultIn the event of a fault in the system,control indicator r illuminates in theinstrument cluster 3 72.Additionally if the system does notwork due to temporary conditions likesnow covered sensors, rilluminates.

Basic notes on parking assistsystems

9 Warning

Under certain circumstances,various reflective surfaces onobjects or clothing as well asexternal noise sources may causethe system to fail to detectobstacles.Special attention must be paid tolow obstacles which can damagethe lower part of the bumper.

Caution

Performance of the system can bereduced when sensors arecovered, e.g. by ice or snow.Performance of the parking assistsystem can be reduced due toheavy loading.Special conditions apply if thereare taller vehicles in the vicinity(e.g. off-road vehicles, mini vans,vans). Object identification and

Driving and operating 121

correct distance indication in theupper part of these vehiclescannot be guaranteed.Objects with a very small reflectioncross-section, e.g. objects ofnarrow size or soft materials, maynot be detected by the system.Parking assist systems do notdetect objects outside thedetection range.

Lane departure warningThe lane departure warning systemobserves the lane markings betweenwhich the vehicle is driving via a frontcamera. The system detects lanechanges and warns the driver in theevent of an unintended lane changevia visual and acoustic signals.Criteria for the detection of anunintended lane change are:● No operation of turn lights.● No brake pedal operation.● No active accelerator operation

or speeding-up.● No active steering.

If the driver is performing theseactions, no warning will be issued.

Activation

The lane departure warning system isactivated by pressing ). Theilluminated LED in the buttonindicates that the system is switchedon. When control indicator ) in theinstrument cluster illuminates green,the system is ready to operate.The system is only operable atvehicle speeds above 56 km/h and iflane markings are available.

When the system recognises anunintended lane change, controlindicator ) changes to yellow andflashes. Simultaneously a chimesound is activated.

DeactivationThe system is deactivated bypressing ), the LED in the buttonextinguishes.At speeds below 56 km/h the systemis inoperable.

FaultThe lane departure warning systemmay not operate properly when:● The windscreen is not clean.● There are adverse environmental

conditions e.g. heavy rain, snow,direct sunlight or shadows.

122 Driving and operating

The system can not operate when nolane marking is detected. Fuel

Fuel for petrol engines

Only use unleaded fuel that complieswith European standard EN 228 orequivalent.The engine is capable of running withfuel that contains up to 10% ethanol(e.g. named E10).Use fuel with the recommendedoctane rating. A lower octane ratingcan reduce engine power and torqueand slightly increases fuelconsumption.

Caution

Do not use fuel or fuel additivesthat contain metallic compoundssuch as manganese-basedadditives. This may cause enginedamage.

Caution

Use of fuel that does not comply toEN 228 or equivalent can lead todeposits or engine damage.

Caution

Use of fuel with a lower octanerating than the lowest possiblerating could lead to uncontrolledcombustion and engine damage.

The engine specific requirementsregarding octane rating are given inthe engine data overview 3 171. Acountry specific label at the fuel fillerflap can supersede the requirement.

Driving and operating 123

Fuel additiveFuel should contain detergentadditives that help prevent engineand fuel system deposits fromforming. Clean fuel injectors andintake valves will allow the emissioncontrol system to work properly. Incertain countries fuel does notcontain sufficient quantities ofadditive to keep fuel injectors andintake valves clean. In thesecountries a fuel additive is required forsome engines to make up for this lackof detergency. Only use fuel additiveapproved for the vehicle.Adding fuel additive to the filled fueltank is required at least every 15,000km or after one year, whicheveroccurs first. For further information,contact your workshop.

Prohibited fuelsFuels containing oxygenates such asethers and ethanol, as well asreformulated fuel, are available insome cities. If these fuels comply withthe previously describedspecification, then they areacceptable to use. However, E85

(85% ethanol) and other fuelscontaining more than 15% ethanolmust be used only in FlexFuelvehicles.

Caution

Do not use fuel containingmethanol. It can corrode metalparts in the fuel system and alsodamage plastic and rubber parts.This damage would not becovered by the vehicle warranty.

Some fuels, mainly high octaneracing fuels, can contain an octaneenhancing additive calledmethylcyclopentadienyl manganesetricarbonyl (MMT). Do not use fuels orfuel additives with MMT as they canreduce spark plug life and affectemission control systemperformance. The malfunctionindicator light Z may illuminate 3 71.If this occurs, seek the assistance ofa workshop.

Refuelling

9 Danger

Before refuelling, switch offignition and any external heaterswith combustion chambers.Follow the operating and safetyinstructions of the filling stationwhen refuelling.

124 Driving and operating

9 Danger

Fuel is flammable and explosive.No smoking. No naked flames orsparks.If you can smell fuel in yourvehicle, have the cause of thisremedied immediately by aworkshop.

A label with symbols at the fuel fillerflap is indicating the allowed fueltypes. In Europe the pump nozzles ofthe filling stations are marked withthese symbols. Refuel only theallowed fuel type.

Caution

In case of misfuelling, do notswitch on ignition.

1. Stop the engine.

2. Pull up the fuel filler flap releaselever located on the floor, left frontside of driver's seat.The fuel filler flap is located at rightrear side of the vehicle.

3. Turn the fuel filler capcounterclockwise slowly. If ahissing sound is heard, wait for itto stop before completelyunscrewing the cap.

4. Remove the cap. The cap istethered to the vehicle.

5. Place the nozzle in straightposition to the filler neck andpress with slight force to insert.To refuel, switch on pump nozzle.After the automatic cut-off, thetank can be topped up byoperating the pump nozzle amaximum of two more times.

Caution

Wipe off any overflowing fuelimmediately.

6. To close, turn the fuel filler capclockwise until it clicks.

7. Push the fuel filler flap closed untilit latches.

Driving and operating 125

NoteIf, in cold weather, the fuel filler doordoes not open, tap the door lightly.Then try to open it again.

Fuel filler capOnly use genuine fuel filler caps.

126 Vehicle care

Vehicle care

General Information ................... 126Accessories and vehiclemodifications .......................... 126

Vehicle storage ........................ 127End-of-life vehicle recovery ..... 127

Vehicle checks ........................... 128Performing work ...................... 128Bonnet ..................................... 128Engine oil ................................. 129Engine coolant ......................... 130Washer fluid ............................ 131Brakes ..................................... 131Brake fluid ............................... 131Vehicle battery ......................... 131Wiper blade replacement ........ 133

Bulb replacement ....................... 134Halogen headlights .................. 134Front fog lights ......................... 136Front turn lights ....................... 136Tail lights ................................. 137Side turn lights ......................... 138Centre high-mounted brakelight ......................................... 138

Number plate light ................... 139

Interior lights ............................ 139Instrument panel illumination ... 139

Electrical system ........................ 140Fuses ....................................... 140Engine compartment fuse box . 141Instrument panel fuse box ....... 143

Vehicle tools .............................. 144Tools ........................................ 144

Wheels and tyres ....................... 145Winter tyres ............................. 145Tyre designations .................... 145Tyre pressure .......................... 146Tyre pressure monitoringsystem .................................... 147

Tread depth ............................. 150Changing tyre and wheel size . 150Wheel covers ........................... 150Tyre chains .............................. 151Tyre repair kit .......................... 151Wheel changing ....................... 154Spare wheel ............................ 155

Jump starting ............................. 159Towing ....................................... 160

Towing the vehicle ................... 160Appearance care ....................... 161

Exterior care ............................ 161Interior care ............................. 163

General InformationAccessories and vehiclemodificationsWe recommend the use of genuineparts and accessories and factoryapproved parts specific for yourvehicle type. We cannot assess orguarantee reliability of other products- even if they have a regulatory orotherwise granted approval.Any modification, conversion or otherchanges made to standard vehiclespecifications (including, withoutlimitation, software modifications,modifications of the electronic controlunits) may invalidate the warrantyoffered by Opel. Furthermore, suchchanges may affect driver assistancesystems, fuel consumption, CO2emissions and other emissions of thevehicle. They may also invalidate thevehicle operating permit.

Vehicle care 127

Caution

When transporting the vehicle ona train or on a recovery vehicle, themud flaps might be damaged.

Vehicle storageStorage for a long period of timeIf the vehicle is to be stored for severalmonths:● Wash and wax the vehicle.● Have the wax in the engine

compartment and underbodychecked.

● Clean and preserve the rubberseals.

● Fill up fuel tank completely.● Change the engine oil.● Drain the washer fluid reservoir.● Check the coolant antifreeze and

corrosion protection.● Adjust tyre pressure to the value

specified for full load.

● Park the vehicle in a dry, wellventilated place. Engage first orreverse gear. Prevent the vehiclefrom rolling.

● Do not apply the parking brake.● Open the bonnet, close all doors

and lock the vehicle.● Disconnect the clamp from the

negative terminal of the vehiclebattery. Beware that all systemsare not functional, e.g. anti-theftalarm system.

Putting back into operationWhen the vehicle is to be put back intooperation:● Connect the clamp to the

negative terminal of the vehiclebattery. Activate the electronicsof the power windows.

● Check tyre pressure.● Fill up the washer fluid reservoir.● Check the engine oil level.● Check the coolant level.● Fit the number plate if necessary.

End-of-life vehicle recoveryInformation on end-of-life vehiclerecovery centres and the recycling ofend-of-life vehicles is available on ourwebsite. Only entrust this work to anauthorised recycling centre.Gas vehicles must be recycled by aservice centre authorised for gasvehicles.

128 Vehicle care

Vehicle checksPerforming work

9 Warning

Only perform engine compartmentchecks when the ignition is off.The cooling fan may startoperating even if the ignition is off.

9 Danger

The ignition system usesextremely high voltage. Do nottouch.

BonnetOpening

Pull the release lever and return it toits original position.

Move the safety catch sideways to theleft vehicle side and open the bonnet.

Vehicle care 129

9 Warning

When the engine is hot, touch thebonnet support rod at the foampadding only.

Lift the bonnet, remove the bonnetsupport rod from the holder andsecure the bonnet support rodproperly.If the bonnet is opened during anAutostop, the engine will be restartedautomatically for safety reasons.

ClosingBefore closing the bonnet, make surethat all caps are closed properly, thenpress the support into the holder.Lower the bonnet and allow it to fallinto the latch from a low height(20-25 cm). Check that the bonnet isengaged.

Caution

Do not press the bonnet into thelatch, to avoid dents.

Engine oilCheck the engine oil level manuallyon a regular basis to prevent damageto the engine.Ensure that the correct specificationof oil is used.Recommended fluids and lubricants3 165.The maximum engine oilconsumption is 0.6 l per 1000 km.Check with the vehicle on a levelsurface. The engine must be atoperating temperature and switchedoff for at least 5 minutes.

Pull out the dipstick, wipe it clean,reinsert it fully, pull out and read theengine oil level.When the engine oil level hasdropped to the MIN mark, top upengine oil.

We recommend the use of the samegrade of engine oil that was used atlast change.The engine oil level must not exceedthe MAX mark on the dipstick.

130 Vehicle care

Caution

Overfilled engine oil must bedrained or suctioned out. If the oilexceeds the maximum level, donot start the vehicle and contact aworkshop.

Capacities 3 172.Fit the cap on straight and tighten it.

Engine coolantThe coolant provides freezeprotection down to approx. -28 °C. Innorthern countries with very lowtemperatures the factory filled coolantprovides frost protection down toapprox. -37 °C.

Caution

Only use approved antifreeze.

Coolant and antifreeze 3 165.

Coolant level

Caution

Too low a coolant level can causeengine damage.

If the cooling system is cold, thecoolant level should be above thefilling line mark. Top up if the level islow.

9 Warning

Allow the engine to cool beforeopening the cap. Carefully openthe cap, relieving the pressureslowly.

To top up use a 1:1 mixture ofreleased coolant concentrate mixedwith clean tap water. If no coolantconcentrate is available, use cleantap water. Install the cap tightly. Havethe coolant concentration checkedand have the cause of the coolantloss remedied by a workshop.

Vehicle care 131

Washer fluid

Fill with clean water mixed with asuitable quantity of approvedwindscreen washer fluid whichcontains antifreeze.

Caution

Only washer fluid with a sufficientantifreeze concentration providesprotection at low temperatures ora sudden drop in temperature.

Washer fluid 3 165.

BrakesIn the event of minimum thickness ofthe brake lining, a squealing noisesounds during braking.Continued driving is possible buthave the brake lining replaced assoon as possible.Once new brake linings are installed,do not brake unnecessarily hard forthe first few journeys.

Brake fluid

9 Warning

Brake fluid is poisonous andcorrosive. Avoid contact with eyes,skin, fabrics and painted surfaces.

The brake fluid level must be betweenthe MIN and MAX marks.If fluid level is below MIN seek theassistance of a workshop.Brake and clutch fluid 3 165.

Vehicle batteryThe vehicle battery is maintenance-free provided that the driving profileallows sufficient charging of thebattery. Short-distance-driving andfrequent engine starts can dischargethe vehicle battery. Avoid the use ofunnecessary electrical consumers.

132 Vehicle care

Batteries do not belong in householdwaste. They must be disposed of atan appropriate recycling collectionpoint.Laying up the vehicle for more thanfour weeks can lead to vehicle batterydischarge. Disconnect the clamp fromthe negative terminal of the vehiclebattery.Ensure the ignition is switched offbefore connecting or disconnectingthe vehicle battery.Battery discharge protection 3 95.

Disconnecting the batteryIf the vehicle's battery is to bedisconnected (e.g. for maintenancework), the alarm siren must bedeactivated as follows: Switch theignition on then off, then disconnectthe vehicle's battery within15 seconds.

Replacing the vehicle batteryNoteAny deviation from the instructionsgiven in this section may lead totemporary deactivation ordisturbance of the stop-start system.

When the vehicle battery is beingreplaced, please ensure that thereare no open ventilation holes in thevicinity of the positive terminal. If aventilation hole is open in this area, itmust be closed off with a dummy cap,and the ventilation in the vicinity of thenegative terminal must be opened.Ensure that the battery is alwaysreplaced by the same type of battery.We recommend the use of an originalOpel battery.NoteUsing an AGM vehicle batterydifferent from the original Opelvehicle battery may result in a lowerperformance.

We recommend that you have thevehicle battery replaced by aworkshop.

Charging the vehicle battery

9 Warning

On vehicles with stop-startsystem, ensure that the chargingpotential does not exceed 14.6 Vwhen using a battery charger.Otherwise the vehicle battery maybe damaged.

Jump starting 3 159.Stop-start system 3 107.

Warning label

Vehicle care 133

Meaning of symbols:● No sparks, naked flames or

smoking.● Always shield eyes. Explosive

gases can cause blindness orinjury.

● Keep the vehicle battery out ofthe reach of children.

● The vehicle battery containssulfuric acid which could causeblindness or serious burninjuries.

● See the Owner's manual forfurther information.

● Explosive gas may be present inthe vicinity of the battery.

Wiper blade replacementWindscreen

Lift the wiper arm. Press release leverand detach the wiper blade.Attach the wiper blade slightly angledto the wiper arm and push until itengages.Lower wiper arm carefully.

Rear window

Lift wiper arm. Push the wiper blade,slightly angled to the wiper armdownwards until it disengages.Attach the wiper blade slightly angledto the wiper arm and push until itengages.Lower wiper arm carefully.

134 Vehicle care

Bulb replacementSwitch off the ignition and switch offthe relevant switch or close the doors.Only hold a new bulb at the base! Donot touch the bulb glass with barehands.Use only the same bulb type forreplacement.Replace headlight bulbs from withinthe engine compartment.

Bulb checkAfter a bulb replacement switch onthe ignition, operate and check thelights.

Halogen headlightsLow beam and high beam

1. On left vehicle side: rotate and pullout the filling pipe of thewindscreen washer fluidcontainer.

2. Remove fuse box cover (left sideof the vehicle only).

3. Press both clips together anddetach plug connector from bulb.

Vehicle care 135

4. Remove protective cover.

5. Press spring clip and disengage.

6. Remove bulb from reflectorhousing.

7. When fitting a new bulb, engagethe lugs in the recesses on thereflector.

8. Engage the spring clip.9. Place headlight protective cover

in position and close.10. Ensure the protective cover is

placed correctly to prevent waterleak and heavy condensations.

Sidelight / Daytime running light1. Remove fuse box cover (left side

of the vehicle only).

2. Rotate the bulb holderanticlockwise and remove.

136 Vehicle care

3. Detach bulb from the bulb holderand replace it.

4. Insert the bulb socket into thereflector and turn clockwise.

Sidelight / daytime running lightwith LEDsSidelights and daytime running lightsare designed as LEDs and cannot bechanged. Consult a workshop in caseof a defective LED.

Front fog lights

1. Tilt the wheel and remove the twopush nuts on the outside of thewheel liner.

2. Disconnect the electricalconnector from the bulb holder.

3. Remove the bulb assemblyanticlockwise and pull it straightout.

4. Insert a new bulb assemblystraight into the lamp and rotateclockwise.

5. Reconnect the electricalconnector.

Front turn lights

1. Rotate the bulb holderanticlockwise and remove.

Vehicle care 137

2. Rotate bulb anticlockwise andremove from bulb holder.

3. Replace bulb.4. Insert the bulb holder into the

reflector and rotate clockwise.

Tail lightsTail light, brake light, turn light,reversing light and rear fog light

1. Unscrew both screws.2. Remove tail light assembly. Take

care that the cable duct remains inposition.

3. tail light / brake light 1turn light 2tail light 3reversing light (passenger side) /rear fog light (driver's side) 4.

4. Rotate bulb holder anticlockwise.

5. Remove bulb holder. Push bulbinto socket slightly, rotate anti-clockwise, remove and renewbulb.

138 Vehicle care

6. Insert bulb holder into the tail lightassembly and screw into place.Connect wiring plug. Install taillight assembly in body and tightenscrews. Close covers andengage.

7. Switch on ignition, operate andcheck all lights.

Side turn lightsTo replace bulb, remove lamphousing:

1. Slide lamp to the front and removeit out of the front wing with the rearend.

2. Turn bulb holder anticlockwiseand remove from housing.

3. Pull bulb from bulb holder andreplace it.

4. Insert bulb holder and turnclockwise.

5. Insert front end into front wing,slide forward and insert rear end.

Centre high-mounted brakelight

Have LEDs replaced by a workshop.

Vehicle care 139

Number plate light

1. Unscrew both screws.2. Remove bulb housing

downwards, taking care not to pullon the cable.Rotate bulb holder anticlockwiseto disengage.

3. Remove bulb from bulb holderand replace it.

4. Insert bulb holder into bulbhousing and turn clockwise.

5. Insert bulb housing and secureusing a screwdriver.

Interior lightsCourtesy light, reading lights1. To remove, prise the opposite

side of the lamp switch using aflat-blade screwdriver. (Be carefulnot to make scratches.)

2. Remove the bulb.3. Replace the bulb.4. Reinstall the lamp assembly.

Load compartment light

1. Prise the lamp out with ascrewdriver.

2. Remove bulb.3. Insert new bulb.4. Install lamp.

Instrument panelilluminationHave bulbs replaced by a workshop.

140 Vehicle care

Electrical systemFusesData on the replacement fuse mustmatch the data on the defective fuse.There are two fuse boxes in thevehicle:● In the front left of the engine

compartment.● On the driver's side behind a

cover in the instrument panel.Before replacing a fuse, turn off therespective switch and the ignition.

There are different kinds of fuses inthe vehicle. Some types of fuses inthe vehicle may differ from the onesillustrated.

Depending on the type of fuse, ablown fuse can be recognized by itsmelted wire. Do not replace the fuseuntil the cause of the fault has beenremedied.Some functions are protected byseveral fuses.Fuses may also be inserted withoutexistence of a function.

Fuse extractorA fuse extractor may be located in thefuse box in the engine compartment.

Vehicle care 141

Place the fuse extractor on thevarious types of fuse from the top, andwithdraw fuse.

Engine compartment fusebox

The fuse box is in the front left of theengine compartment.Disengage the cover, lift it upwardsand remove.

142 Vehicle care

No. Circuit

1 Tailgate

2 Transmission output speedsensor

3 Heated rear window

4 Heated exterior mirror

5 Sunroof

6 Transmission control module

7 Engine control module

8 –

9 ABS

10 Body control module, voltage

11 Rear view camera

12 –

13 –

14 Engine control module/Trans‐mission control module

15 Injection system/Starter

16 Fuel pump

No. Circuit

17 Engine control module1

18 Engine control module2

19 Injection system/Ignition

20 Air conditioning system

21 Battery sensor

22 Electric steering column lock

23 Cooling fan low

24 –

25 Exterior mirror switch

26 Engine control module

27 Fuel system

28 –

29 Seat occupancy recognition

30 Headlight range adjustment

31 Horn

32 Front fog light

33 High beam left

No. Circuit

34 High beam right

35 –

36 Rear wiper

37 Cornering light left

38 Washer system

39 Cornering light right

40 –

41 –

42 Starter 2

43 Instrument panel

44 DC-DC converter

45 Starter 1

46 ABS

47 Cooling fan high

48 Front wiper

49 Body control module/Retainedpower off

Vehicle care 143

After having changed defective fusesclose the fuse box cover and pressuntil it engages.If the fuse box cover is not closedcorrectly, malfunction may occur.

Instrument panel fuse box

The fuse box is located on the driver'sside behind a cover in the instrumentpanel.To open the compartment, compressthe locking tabs, fold cover down andremove.

No. Circuit

1 Onstar

2 Air conditioning system

3 Instrument cluster

4 Transmission control module

5 Infotainment

6 –

7 Rear parking assist

8 Data link connection

9 Electric steering column lock

10 Sensing and Diagnostic module

11 DC transformer

12 –

13 –

14 Linear power module

15 Central locking system/Ignitionsystem

16 Ignition system

144 Vehicle care

No. Circuit

17 –

18 Instrument cluster

19 –

20 Headlight range adjustment

21 Power windows, front

22 Power windows, rear

23 –

24 –

25 Auxiliary power outlet

26 Sunroof

27 Central gateway module

28 Body control module 8

29 Body control module 7

30 Body control module 6

31 Body control module 5

32 Body control module 4

33 Body control module 3

No. Circuit

34 Body control module 2

35 Body control module 1

36 –

37 Steering wheel control LED

38 –

39 Logistic/DC transformer

40 Power window, driver

41 Blower

42 Seat heating, front

43 Air conditioning module

44 Heated steering wheel

45 –

Vehicle toolsToolsVehicles without spare

The vehicle tools are in thecompartment under the floor cover inthe load compartment.

Vehicle care 145

Vehicles with spare wheel

The jack and the vehicle tools are inthe load compartment.

Wheels and tyres

Tyre condition, wheel conditionDrive over edges slowly and at rightangles if possible. Driving over sharpedges can cause tyre and wheeldamage. Do not trap tyres on the kerbwhen parking.Regularly check the wheels fordamage. Seek the assistance of aworkshop in the event of damage orunusual wear.We recommend not swapping thefront wheels with the rear wheels andvice versa, as this can affect vehiclestability. Always use less worn tyreson the rear axle.

Winter tyresWinter tyres improve driving safety attemperatures below 7 °C and shouldtherefore be fitted on all wheels.In accordance with country-specificregulations, affix the speed sticker inthe driver's field of view.

Tyre designationsE.g. 195/55 R 16 95 H195 : tyre width, mm55 : cross-section ratio (tyre height

to tyre width), %R : belt type: RadialRF : type: RunFlat16 : wheel diameter, inches91 : load index e.g. 91 is equivalent

to 615 kgH : speed code letter

Speed code letter:Q : up to 160 km/hS : up to 180 km/hT : up to 190 km/hH : up to 210 km/hV : up to 240 km/hW : up to 270 km/h

Choose a tyre appropriate for themaximum speed of your vehicle.The maximum speed is achievable atkerb weight with driver (75 kg) plus125 kg payload. Optional equipmentcould reduce the maximum speed ofthe vehicle.Performance 3 172.

146 Vehicle care

Directional tyresDirectional tyres must be mounted sothat they rotate in the correctdirection. The proper rotationdirection is indicated by a symbol(e.g. an arrow) on the sidewall.

Tyre pressureCheck the pressure of cold tyres atleast every 14 days and before anylong journey.Do not forget the spare wheel.This also applies to vehicles with tyrepressure monitoring system.

Tyre pressure 3 174.

The tyre pressure information labelon the driver's door frame indicatesthe original equipment tyres and thecorrespondent tyre pressures.The tyre pressure data refers to coldtyres. It applies to summer and wintertyres.The ECO tyre pressure serves toachieve the smallest amount of fuelconsumption possible.Incorrect tyre pressures will impairsafety, vehicle handling, comfort andfuel economy and will increase tyrewear.Tyre pressures differ depending onvarious options.For the correct tyre pressure value,follow the procedure below:● Identify the engine identifier

code.Engine data 3 171.

● Identify the respective tyre.For the tyres approved for yourvehicle, refer to the EEC Certificate ofConformity provided with your vehicleor other national registrationdocuments.

The driver is responsible for correctadjustment of tyre pressure.

9 Warning

If the pressure is too low, this canresult in considerable tyre warm-up and internal damage, leading totread separation and even to tyreblow-out at high speeds.

9 Warning

For specific tyres therecommended tyre pressure asshown in the tyre pressure tablemay exceed the maximum tyrepressure as indicated on the tyre.Never exceed the maximum tyrepressure as indicated on the tyre.

If the tyre pressure must be reducedor increased, switch off ignition. Afteradjusting tyre pressure switch onignition and select the relevant settingon the page Tyre Load in the DriverInformation Centre 3 75.

Vehicle care 147

Temperature dependencyThe tyre pressure depends on thetemperature of the tyre. Duringdriving, tyre temperature andpressure increase. Tyre pressurevalues provided on the tyreinformation label and tyre pressurechart are valid for cold tyres, whichmeans at 20 °C.The pressure increases by nearly10 kPa for a 10 °C temperatureincrease. This must be consideredwhen warm tyres are checked.The tyre pressure value displayed inthe Driver Information Centre showsthe real tyre pressure. A cooled downtyre will show a decreased value,which does not indicate an air leak.

Tyre pressure monitoringsystemThe tyre pressure monitoring systemchecks the pressure of all four tyresonce a minute when vehicle speedexceeds a certain limit.

Caution

Tyre pressure monitoring systemwarns only about low tyre pressurecondition and does not replaceregular tyre maintenance by thedriver.

All wheels must be equipped withpressure sensors and the tyres musthave the prescribed pressure.NoteIn countries where the tyre pressuremonitoring system is legallyrequired, the use of wheels withoutpressure sensors will invalidate thevehicle operating permit.

The current tyre pressures can beshown in the Vehicle InformationMenu in the Driver InformationCentre.The menu can be selected bypressing the buttons on the stalk.

Press MENU to select the VehicleInformation MenuX.

Turn the adjuster wheel to select thetyre pressure monitoring system.

148 Vehicle care

System status and pressure warningsare displayed by a message with thecorresponding tyre flashing in theDriver Information Centre.The system considers the tyretemperature for the warnings.Temperature dependency 3 146.

A detected low tyre pressurecondition is indicated by the controlindicator w 3 73.If w illuminates, stop as soon aspossible and inflate the tyres asrecommended 3 174.

If w flashes for 60-90 seconds thenilluminates continuously, there is afault in the system. Consult aworkshop.After inflating, some driving may berequired to update the tyre pressurevalues in the Driver InformationCentre. During this time w mayilluminate.If w illuminates at lower temperaturesand extinguishes after some driving,this could be an indicator forapproaching a low tyre pressurecondition. Check tyre pressure.Vehicle messages 3 81.If the tyre pressure must be reducedor increased, switch off ignition.Only mount wheels with pressuresensors, otherwise the tyre pressurewill not be displayed and willuminates continuously.A temporary spare wheel is notequipped with pressure sensors. Thetyre pressure monitoring system isnot operational for these tyres.Control indicator w illuminates. Forthe further three tyres, the systemremains operational.

The use of commercially-availableliquid tyre repair kits can impair thefunction of the system. Factory-approved repair kits can be used.Operating electronic devices or beingclose to facilities using similar wavefrequencies could disrupt the tyrepressure monitoring system.Each time the tyres are replaced, tyrepressure monitoring system sensorsmust be dismounted and serviced.For the screwed sensor; replacevalve core and sealing ring. For theclipped sensor; replace completevalve stem.

Vehicle loading statusAdjust tyre pressure to load conditionaccording to the tyre information labelor tyre pressure chart 3 174, andselect the appropriate setting in themenu Tyre Load in the DriverInformation Centre, VehicleInformation Menu 3 75. This setting isthe reference for the tyre pressurewarnings.The Tyre Load menu only appears ifthe vehicle is in a standstill and theparking brake is applied.

Vehicle care 149

Select:● Lo for comfort pressure up to

3 people.● Eco for Eco pressure up to

3 people.● Hi for full loading.

Tyre pressure sensor matchingprocessEach tyre pressure sensor has aunique identification code. Theidentification code must be matchedto a new tyre / wheel position afterrotating the tyres or exchanging thecomplete wheel set and if one or moretyre pressure sensors were replaced.

The tyre pressure sensor matchingprocess should also be performedafter replacing a spare tyre with aroad tyre containing the tyre pressuresensor.The malfunction light w and thewarning message or code should gooff at the next ignition cycle. Thesensors are matched to the wheelpositions, using a relearn tool, in thefollowing order: left side front wheel,right side front wheel, right side rearwheel and left side rear wheel. Theturn light at the current active positionis illuminated until sensor is matched.Consult a workshop for service. Thereare 2 minutes to match the first wheelposition, and 5 minutes overall tomatch all four wheel positions. If ittakes longer, the matching processstops and must be restarted.The tyre pressure sensor matchingprocess is:1. Apply the parking brake.2. Turn the ignition on.3. Select neutral.

4. Use MENU on the stalk to selectthe Vehicle Information Menu inthe Driver Information Centre.

5. Turn the adjuster wheel to scroll tothe tyre pressure menu.

6. Press SET/CLR to begin thesensor matching process. Amessage requesting acceptanceof the process should bedisplayed.

7. Press SET/CLR again to confirmthe selection. The horn soundstwice to indicate that the receiveris in relearn mode.

8. Start with the left side front wheel.9. Place the relearn tool against the

tyre sidewall, near the valve stem.Then press the button to activatethe tyre pressure sensor. A hornchirp confirms that the sensoridentification code has beenmatched to this wheel position.

10. Proceed to the right side frontwheel, and repeat the procedurein Step 9.

11. Proceed to the right side rearwheel, and repeat the procedurein Step 9.

150 Vehicle care

12. Proceed to the left side rearwheel, and repeat the procedurein Step 9. The horn sounds twiceto indicate that the sensoridentification code has beenmatched to the left side rearwheel, and the tyre pressuresensor matching process is nolonger active.

13. Turn off the ignition.14. Set all four tyres to the

recommended air pressure levelas indicated on the tyreinformation label.

15. Ensure the tyre loading status isset according to the selectedpressure 3 75.

Tread depthCheck tread depth at regularintervals.Tyres should be replaced for safetyreasons at a tread depth of 2-3 mm(4 mm for winter tyres).For safety reasons it is recommendedthat the tread depth of the tyres onone axle should not vary by more than2 mm.

The legally permissible minimumtread depth (1.6 mm) has beenreached when the tread has worndown as far as one of the tread wearindicators (TWI). Their position isindicated by markings on thesidewall.Tyres age, even if they are not used.We recommend tyre replacementevery 6 years.

Changing tyre and wheelsizeIf tyres of a different size than thosefitted at the factory are used, it may benecessary to reprogramme thenominal tyre pressure and makeother vehicle modifications.After converting to a different tyresize, have the label with tyrepressures replaced 3 147.

9 Warning

Use of unsuitable tyres or wheelsmay lead to accidents and willinvalidate the vehicle typeapproval.

Wheel coversWheel covers and tyres that arefactory approved for the respectivevehicle and comply with all of therelevant wheel and tyre combinationrequirements must be used.If the wheel covers and tyres used arenot factory approved, the tyres mustnot have a rim protection ridge.

Vehicle care 151

Wheel covers must not impair brakecooling.

9 Warning

Use of unsuitable tyres or wheelcovers could lead to suddenpressure loss and therebyaccidents.

Tyre chains

Tyre chains are only permitted on thefront wheels.

Always use fine mesh chains that addno more than 10 mm to the tyre treadand the inboard sides (including chainlock).

9 Warning

Damage may lead to tyre blowout.

Tyre chains are only permitted ontyres of size 165/65 R14.Tyre chains are not permitted on tyresof size 185/55 R15 and 195/45 R16.The use of tyre chains is not permittedon the temporary spare wheel.

Tyre repair kitMinor damage to the tyre tread can berepaired with the tyre repair kit.Do not remove foreign bodies fromthe tyres.Tyre damage exceeding 4 mm or thatis at the tyre's sidewall cannot berepaired with the tyre repair kit.

9 Warning

Do not drive faster than 80 km/h.Do not use for a lengthy period.Steering and handling may beaffected.

If you have a flat tyre:Apply the parking brake and engagefirst gear or reverse gear.

The tyre repair kit is in the tool boxunder the floor cover in the loadcompartment.

152 Vehicle care

1. Open the floor cover.

2. Remove the compressor and thesealant bottle.

3. Remove the electrical connectioncable and air hose from thestorage compartments on theunderside of the compressor.

4. Screw the compressor air hose tothe connection on the sealantbottle.

5. Fit the sealant bottle into theretainer on the compressor.Set the compressor near the tyrein such a way that the sealantbottle is upright.

6. Unscrew valve cap from defectivetyre.

7. Screw the filler hose to the tyrevalve.

8. The switch on the compressormust be set to J.

9. Connect the compressor plug tothe power outlet or cigarettelighter socket.To avoid discharging the battery,we recommend running theengine.

Vehicle care 153

Set the rocker switch on thecompressor to I. The tyre is filledwith sealant.

10. The compressor pressure gaugebriefly indicates up to 6 bar whilstthe sealant bottle is emptying(approx. 30 seconds). Then thepressure starts to drop.

11. All of the sealant is pumped intothe tyre. Then the tyre is inflated.

12. The prescribed tyre pressureshould be obtained within10 minutes.Tyre pressure 3 174.When the correct pressure isobtained, switch off thecompressor.

If the prescribed tyre pressure isnot obtained within 10 minutes,remove the tyre repair kit. Movethe vehicle one tyre rotation.Reattach the tyre repair kit andcontinue the filling procedure for10 minutes. If the prescribed tyrepressure is still not obtained, thetyre is too badly damaged. Seekthe assistance of a workshop.

Drain excess tyre pressure withthe button over the pressureindicator.

Depending on version the buttoncan be located on the air hose.Do not run the compressor longerthan 10 min.

13. Detach the tyre repair kit. Pushcatch on bracket to removesealant bottle from bracket. Screwthe tyre inflation hose to the freeconnection of the sealant bottle.This prevents sealant fromescaping. Stow tyre repair kit inload compartment.

14. Remove any excess sealantusing a cloth.

154 Vehicle care

15. Take the label indicatingmaximum permitted speed fromthe sealant bottle and affix in thedriver's field of view.

16. Continue driving immediately sothat sealant is evenly distributedin the tyre. After driving approx.10 km (but no more than10 minutes), stop and check tyrepressure. Screw compressor airhose directly onto tyre valve andcompressor when doing this.

If tyre pressure is more than1.3 bar, set it to the correct value.Repeat the procedure until thereis no more loss of pressure.

If the tyre pressure has fallenbelow 1.3 bar, the vehicle mustnot be used. Seek the assistanceof a workshop.

17. Stow away tyre repair kit in loadcompartment.Reinstall floor cover.Rear floor storage cover 3 56.

NoteThe driving characteristics of therepaired tyre are severely affected,therefore have this tyre replaced.If unusual noise is heard or thecompressor becomes hot, turncompressor off for at least 30 min.The built-in safety valve opens at apressure of 7 bar.Note the expiry date of the kit. Afterthis date its sealing capability is nolonger guaranteed. Pay attention tostorage information on sealantbottle.Replace the used sealant bottle.Dispose of the bottle as prescribedby applicable laws.The compressor and sealant can beused from approx. -30 °C.

The adapters possibly supplied canbe used to pump up other items e.g.footballs, air mattresses, inflatabledinghies etc. They can be located onthe underside of the compressor. Toremove, screw on compressor airhose and withdraw adapter.

Wheel changingMake the following preparations andobserve the following information:● Park the vehicle on a level, firm

and non-skid surface. The frontwheels must be in the straight-ahead position.

● Apply the parking brake andengage first gear or reverse gear.

● If the ground on which the vehicleis standing is soft, a solid board(max. 1 cm thick) should beplaced under the jack.

● Take heavy objects out of thevehicle before jacking up.

● No people or animals may be inthe vehicle when it is jacked-up.

● Never crawl under a jacked-upvehicle.

Vehicle care 155

● Do not start the vehicle when it israised on the jack.

● Clean wheel nuts and thread witha clean cloth before mounting thewheel.

9 Warning

Do not grease wheel bolt, wheelnut and wheel nut cone.

Jacking positionsThe jacking positions shown refer tothe use of lifting arms and accessoryjacks used for changing winter /summer tyres.

Rear arm position of the liftingplatform, located centrally under therecess of the sill.

Front arm position of the liftingplatform at the underbody.

Spare wheelTemporary spare wheelOnly mount one temporary sparewheel. Do not drive faster than80 km/h. Take curves slowly. Do notuse for a long period of time.

Caution

The use of a spare wheel that issmaller than the other wheels or incombination with winter tyrescould affect driveability. Have thedefective tyre replaced as soon aspossible.

The spare wheel is located in the loadcompartment beneath the floorcovering. It is secured in the recesswith a wing bolt.

156 Vehicle care

Only mount one temporary sparewheel. The permissible maximumspeed on the label on the temporaryspare wheel is only valid for thefactory-fitted tyre size.

Fitting the spare wheelMake the following preparations andobserve the following information:● Park the vehicle on a level, firm

and non-skid surface. The frontwheels must be in the straight-ahead position.

● Apply the parking brake andengage first gear or reverse gear.

● Remove the spare wheel 3 155.● Never change more than one

wheel at once.● Use the jack only to change

wheels in case of puncture, notfor seasonal winter or summertyre change.

● The jack is maintenance-free.● If the ground on which the vehicle

is standing is soft, a solid board(max. 1 cm thick) should beplaced under the jack.

● Take heavy objects out of thevehicle before jacking up.

● No people or animals may be inthe vehicle when it is jacked-up.

● Never crawl under a jacked-upvehicle.

● Do not start the vehicle when it israised on the jack.

● Clean wheel nuts and thread witha clean cloth before mounting thewheel.

9 Warning

Do not grease wheel bolt, wheelnut and wheel nut cone.

1. Steel wheels:Pull off the wheel cover.Alloy wheels with bolt capsDisengage wheel bolt caps with ascrewdriver and remove. Toprotect the wheel, place a softcloth between the screwdriverand the alloy wheel.Alloy wheels with centre cap

Insert extractor in the open slot ofthe centre cap and remove thecap from the wheel.Vehicle tools 3 144.

2. Install the wheel wrench ensuringthat it locates securely and looseneach wheel bolt by half a turn.The wheels might be protected bylocking wheel bolts. To loosenthese specific bolts, first attachthe adapter for the locking wheelbolts onto the head of the boltbefore installing the wheelwrench. The adapter is located inthe glovebox.

Vehicle care 157

3. Ensure the jack is correctlypositioned under the relevantvehicle jacking point.

4. Set the jack to the necessaryheight. Position it directly below

the jacking point in a manner thatprevents it from slipping.Attach jack handle and with thejack correctly aligned rotatehandle until wheel is clear of theground.

5. Unscrew the wheel bolts.6. Change the wheel.7. Screw on the wheel bolts.8. Lower vehicle and remove jack.9. Install the wheel wrench ensuring

that it is securely located andtighten each bolt in a crosswisesequence. Tightening torque is140 Nm.

10. Align the valve hole in the wheelcover of the steel wheel with thetyre valve before installing.Install wheel bolt caps or centrecap on alloy wheel.

11. Stow and secure the replacedwheel, the vehicle tools 3 144 andthe adapter for the locking wheelbolts 3 52.

12. Check the tyre pressure of theinstalled tyre and the wheel bolttorque as soon as possible.

Stowing a damaged wheel in theload compartment using a strapUse the strap placed in the tool box.Vehicle tools 3 144.The spare wheel well is not designedfor all permitted tyre sizes. If a wheelwider than the spare must be stowedin the spare wheel well after changingwheels, the floor cover can be placedon the projecting wheel.1. Remove load compartment cover

and lift up load compartment floor.Position the tool box and thedamaged wheel to stand uprightinto the tool box spare.

2. Pull up the release knob on top ofthe rear seat and move backrestforwards.

158 Vehicle care

3. Place the loop end of the strapfrom the tool box through thebackrest latch.

4. Place the hook end of the strapthrough the loop and pull it untilthe strap is fastened securely tothe backrest latch.

5. Pull back the backrests.6. Mount the hook to the tailgate

latch.7. Tighten the strap and secure it

using the buckle.

9 Warning

Storing a jack, a wheel or otherequipment in the loadcompartment could cause injury ifthey are not fixed properly. Duringa sudden stop or a collision, looseequipment could strike someone.

Store jack and tools always in therespective storage compartmentsand secure them by fixing.Damaged wheel placed in the loadcompartment must always besecured by the strap.

9 Danger

Always drive with folded up andengaged rear seat backrests whenstowing a damaged full size wheelin the load compartment.

Vehicle care 159

Jump startingDo not start with a quick charger.A vehicle with a discharged vehiclebattery can be started using jumpleads and the vehicle battery ofanother vehicle.

9 Warning

Be extremely careful when startingwith jump leads. Any deviationfrom the following instructions canlead to injuries or damage causedby battery explosion or damage tothe electrical systems of bothvehicles.

9 Warning

Avoid contact of the battery witheyes, skin, fabrics and paintedsurfaces. The fluid containssulphuric acid which can causeinjuries and damage in the eventof direct contact.

● Never expose the battery tonaked flames or sparks.

● A discharged vehicle battery canalready freeze at a temperatureof 0 °C. Defrost the frozen batterybefore connecting jump leads.

● Wear eye protection andprotective clothing whenhandling a battery.

● Use a booster battery with thesame voltage (12 V). Its capacity(Ah) must not be much less thanthat of the discharged battery.

● Use jump leads with insulatedterminals and a cross section ofat least 16 mm2.

● Do not disconnect the dischargedvehicle battery from the vehicle.

● Switch off all unnecessaryelectrical consumers.

● Do not lean over the batteryduring jump starting.

● Do not allow the terminals of onelead to touch those of the otherlead.

● The vehicles must not come intocontact with each other duringthe jump starting process.

● Apply the parking brake,transmission in neutral.

● Open the positive terminalprotection caps of both vehiclebatteries.

Lead connection order:1. Connect the red lead to the

positive terminal of the boosterbattery.

2. Connect the other end of the redlead to the positive terminal of thedischarged battery.

160 Vehicle care

3. Connect the black lead to thenegative terminal of the boosterbattery.

4. Connect the other end of the blacklead to a vehicle grounding point,such as the engine block or anengine mounting bolt. Connect asfar away from the dischargedvehicle battery as possible,however at least 60 cm.

Route the leads so that they cannotcatch on rotating parts in the enginecompartment.To start the engine:1. Start the engine of the vehicle

providing the jump.2. After 5 minutes, start the other

engine. Start attempts should bemade for no longer than15 seconds at an interval of1 minute.

3. Allow both engines to idle forapprox. 3 minutes with the leadsconnected.

4. Switch on electrical consumers(e.g. headlights, heated rearwindow) of the vehicle receivingthe jump start.

5. Reverse above sequence exactlywhen removing leads.

TowingTowing the vehicleThe towing eye is stowed with thevehicle tools 3 144.

1. Wrap a cloth around the tip of a flatscrewdriver to prevent paintdamage. Disengage cap by usingthe screwdriver and remove thecap.

Vehicle care 161

2. Screw in the towing eye as far asit will go until it stops in ahorizontal position.

3. Attach a tow rope – or better still atow rod – to the towing eye.

GeneralThe towing eye must only be used fortowing and not for recovering thevehicle.Switch on ignition to release steeringwheel lock and to permit operation ofbrake lights, horn and windscreenwiper.Switch the selector lever to neutral.Release the parking brake.

Caution

Drive slowly. Do not drive jerkily.Excessive tractive force candamage the vehicle.

When the engine is not running,considerably more force is needed tobrake and steer.To prevent the entry of exhaust gasesfrom the towing vehicle, switch on theair recirculation and close thewindows.The vehicle must be towed facingforward, not faster than 88 km/h. In allother cases and when thetransmission is defective, the frontaxle must be raised off the ground.Seek the assistance of a workshop.After towing, unscrew the towing eye.Insert cap and engage in the frontbumper.

Appearance careExterior careLocksThe locks are lubricated at the factoryusing a high quality lock cylindergrease. Use a de-icing agent onlywhen absolutely necessary, as thishas a degreasing effect and impairslock function. After using a de-icingagent, have the locks regreased by aworkshop.

WashingThe paintwork of your vehicle isexposed to environmental influences.Wash and wax your vehicle regularly.When using automatic vehiclewashes, select a programme thatincludes waxing.Bird droppings, dead insects, resin,pollen and the like should be cleanedoff immediately, as they containaggressive constituents which cancause paint damage.

162 Vehicle care

If using a car wash, comply with thecar wash manufacturer's instructions.The windscreen wiper and rearwindow wiper must be switched off.Remove antenna and externalaccessories such as roof racks etc.If you wash your vehicle by hand,make sure that the insides of thewheel housings are also thoroughlyrinsed out.Clean edges and folds on openeddoors and the bonnet as well as theareas they cover.Clean bright metal mouldings with acleaning solution approved foraluminium to avoid damages.

Caution

Always use a cleaning agent witha pH value of four to nine.Do not use cleaning agents on hotsurfaces.

Have the door hinges of all doorsgreased by a workshop.Do not clean the engine compartmentwith a steam-jet or high-pressure jetcleaner.

Thoroughly rinse and leather-off thevehicle. Rinse leather frequently. Useseparate leathers for painted andglass surfaces: remnants of wax onthe windows will impair vision.Do not use hard objects to removespots of tar. Use tar removal spray onpainted surfaces.

Exterior lightsHeadlight and other light covers aremade of plastic. Do not use anyabrasive or caustic agents, do not usean ice scraper, and do not clean themdry.

Polishing and waxingWax painted parts of the vehicleregularly (at the latest when water nolonger beads). Otherwise, thepaintwork will dry out.Polishing is necessary only if the painthas become dull or if solid depositshave become attached to it.Paintwork polish with silicone forms aprotective film, making waxingunnecessary.

Unpainted plastic body parts must notbe treated with wax or polishingagents.

Windows and windscreen wiperbladesSwitch off wipers before handling intheir areas.Use a soft lint-free cloth or chamoisleather together with window cleanerand insect remover.When cleaning the rear window frominside, always wipe in parallel to theheating element to prevent damage.For mechanical removal of ice, use asharp-edged ice scraper. Press thescraper firmly against the glass sothat no dirt can get under it andscratch the glass.Clean smearing wiper blades with asoft cloth and window cleaner.

Vehicle care 163

SunroofNever clean with solvents or abrasiveagents, fuels, aggressive media (e.g.paint cleaner, acetone-containingsolutions etc.), acidic or highlyalkaline media or abrasive pads. Donot apply wax or polishing agents tothe sunroof.

Wheels and tyresDo not use high-pressure jetcleaners.Clean rims with a pH-neutral wheelcleaner.Rims are painted and can be treatedwith the same agents as the body.

Paintwork damageRectify minor paintwork damage witha touch-up pen before rust forms.Have more extensive damage or rustareas repaired by a workshop.

UnderbodySome areas of the vehicle underbodyhave a PVC undercoating while othercritical areas have a durableprotective wax coating.

After the underbody is washed, checkthe underbody and have it waxed ifnecessary.Bitumen / rubber materials coulddamage the PVC coating. Haveunderbody work carried out by aworkshop.Before and after winter, wash theunderbody and have the protectivewax coating checked.

Interior careInterior and upholsteryOnly clean the vehicle interior,including the instrument panel fasciaand panelling, with a dry cloth orinterior cleaner.Clean the leather upholstery withclear water and a soft cloth. In case ofheavy soiling, use leather care.The instrument cluster and thedisplays should only be cleaned usinga soft damp cloth. If necessary use aweak soap solution.Clean fabric upholstery with avacuum cleaner and brush. Removestains with an upholstery cleaner.

Clothing fabrics may not becolourfast. This could cause visiblediscolourations, especially on light-coloured upholstery. Removablestains and discolourations should becleaned as soon as possible.Clean seat belts with lukewarm wateror interior cleaner.

Caution

Close Velcro fasteners as openVelcro fasteners on clothing coulddamage seat upholstery.The same applies to clothing withsharp-edged objects, like zips orbelts or studded jeans.

Plastic and rubber partsPlastic and rubber parts can becleaned with the same cleaner asused to clean the body. Use interiorcleaner if necessary. Do not use anyother agent. Avoid solvents and petrolin particular. Do not use high-pressure jet cleaners.

164 Service and maintenance

Service andmaintenance

General information ................... 164Service information .................. 164

Recommended fluids, lubricantsand parts .................................... 165

Recommended fluids andlubricants ................................ 165

General informationService informationIn order to ensure economical andsafe vehicle operation and tomaintain the value of your vehicle, itis of vital importance that allmaintenance work is carried out at theproper intervals as specified.The detailed, up-to-date serviceschedule for your vehicle is availableat the workshop.Service display 3 66.

European service intervalsMaintenance of your vehicle isrequired every 30,000 km or after oneyear, whichever occurs first.Additional engine oil and filter changeis indicated by the engine oil lifesystem, when required earlier thanmaintenance.A shorter service interval can be validfor severe driving behaviour, e.g. fortaxis and police vehicles.The European service intervals arevalid for the following countries:

Andorra, Austria, Belgium, Bosnia-Herzegovina, Bulgaria, Croatia,Cyprus, Czech Republic, Denmark,Estonia, Finland, France, Germany,Greece, Greenland, Hungary,Iceland, Ireland, Italy, Latvia,Liechtenstein, Lithuania,Luxembourg, Macedonia, Malta,Monaco, Montenegro, Netherlands,Norway, Poland, Portugal, Romania,San Marino, Serbia, Slovakia,Slovenia, Spain, Sweden,Switzerland, United Kingdom.Service display 3 66.

International service intervalsMaintenance of your vehicle isrequired every 15,000 km or after oneyear, whichever occurs first.Additional engine oil and filter changeis indicated by the engine oil lifesystem, when required earlier thanmaintenance.Severe operating conditions exist ifone or more of the followingcircumstances occur frequently: Coldstarting, stop and go operation, traileroperation, mountain driving, drivingon poor and sandy road surfaces,

Service and maintenance 165

increased air pollution, presence ofairborne sand and high dust content,driving at high altitude and largevariations of temperature. Underthese severe operating conditions,certain service work may be requiredmore frequently than the regularservice interval.The international service intervals arevalid for the countries which are notlisted in the European serviceintervals.Service display 3 66.

ConfirmationsConfirmation of service is recorded inthe Service and Warranty Booklet.The date and mileage is completedwith the stamp and signature of theservicing workshop.Make sure that the Service andWarranty Booklet is completedcorrectly as continuous proof ofservice is essential if any warranty orgoodwill claims are to be met, and isalso a benefit when selling thevehicle.

Recommended fluids,lubricants and partsRecommended fluids andlubricantsOnly use products that meet therecommended specifications.

9 Warning

Operating materials arehazardous and could bepoisonous. Handle with care. Payattention to information given onthe containers.

Engine oilEngine oil is identified by its qualityand its viscosity. Quality is moreimportant than viscosity whenselecting which engine oil to use. Theoil quality ensures e.g. enginecleanliness, wear protection and oilaging control, whereas viscositygrade gives information on the oil'sthickness over a temperature range.

Dexos is the newest engine oil qualitythat provides optimum protection forpetrol engines. If it is unavailable,engine oils of other listed qualitieshave to be used.Select the appropriate engine oilbased on its quality and on theminimum ambient temperature3 169.

Topping up engine oil

Caution

In case of any spilled oil, wipe it upand dispose it properly.

Engine oils of different manufacturersand brands can be mixed as long asthey comply with the required engineoil quality and viscosity.Use of engine oil with only ACEAquality is prohibited, since it cancause engine damage under certainoperating conditions.Select the appropriate engine oilbased on its quality and on theminimum ambient temperature3 169.

166 Service and maintenance

Additional engine oil additivesThe use of additional engine oiladditives could cause damage andinvalidate the warranty.

Engine oil viscosity gradesThe SAE viscosity grade givesinformation of the thickness of the oil.Multigrade oil is indicated by twofigures, e.g. SAE 5W-30. The firstfigure, followed by a W, indicates thelow temperature viscosity and thesecond figure the high temperatureviscosity.Select the appropriate viscosity gradedepending on the minimum ambienttemperature 3 169.All of the recommended viscositygrades are suitable for high ambienttemperatures.

Coolant and antifreezeUse only silicate-free long life coolant(LLC) antifreeze approved for thevehicle. Consult a workshop.The system is factory filled withcoolant designed for excellentcorrosion protection and frostprotection down to approx. -36 °C. In

northern countries with very lowtemperatures the factory filled coolantprovides frost protection down toapprox. -50 °C. This concentrationshould be maintained all year round.The use of additional coolantadditives that intend to give additionalcorrosion protection or seal againstminor leaks can cause functionproblems. Liability for consequencesresulting from the use of additionalcoolant additives will be rejected.

Washer fluidUse only washer fluid approved forthe vehicle to prevent damage ofwiper blades, paintwork, plastic andrubber parts. Consult a workshop.

Brake and clutch fluidOver time, brake fluid absorbsmoisture which will reduce brakingeffectiveness. The brake fluid shouldtherefore be replaced at the specifiedinterval.

Technical data 167

Technical data

Vehicle identification .................. 167Vehicle Identification Number .. 167Identification plate ................... 168Engine identification ................ 168

Vehicle data ............................... 169Recommended fluids andlubricants ................................ 169

Engine data ............................. 171Vehicle dimensions ................. 173Tyre pressures ........................ 174

Vehicle identificationVehicle IdentificationNumber

The Vehicle Identification Number islocated in the engine compartment.

The Vehicle Identification Numbermay be embossed on the instrumentpanel, visible through the windscreen.

168 Technical data

Identification plate

The identification plate is located onthe left door frame.

Information on identification label:1 : manufacturer2 : type approval number3 : vehicle identification number4 : permissible gross vehicle weight

rating in kg5 : permissible gross train weight

in kg6 : maximum permissible front axle

load in kg7 : maximum permissible rear axle

load in kg

The combined total of front and rearaxle loads must not exceed thepermissible gross vehicle weight. Forexample, if the front axle is bearing itsmaximum permissible load, the rearaxle can only bear a load that is equalto the gross vehicle weight minus thefront axle load.The technical data is determined inaccordance with EuropeanCommunity standards. We reservethe right to make modifications.Specifications in the vehicledocuments always have priority overthose given in this manual.

Engine identificationThe technical data tables use theengine identifier code.Engine data 3 171.To identify the respective engine,refer to the EEC Certificate ofConformity provided with your vehicleor other national registrationdocuments.The Certificate of Conformity showsthe engine identifier code, othernational publications may show theengineering code. Check pistondisplacement and engine power toidentify the respective engine.

Technical data 169

Vehicle dataRecommended fluids and lubricantsEuropean service schedule

Required engine oil qualityAll European countries with European service interval 3 164

Engine oil quality Petrol engines

dexos2 ✔

In case dexos quality is unavailable, you may use max. 1 l engine oil quality ACEA C3 once between each oil change.

Engine oil viscosity gradesAll European countries with European service interval 3 164

Ambient temperature Petrol engines

down to -25 °C SAE 0W-30 or SAE 0W-40SAE 5W-30 or SAE 5W-40

below -25 °C SAE 0W-30 or SAE 0W-40

170 Technical data

International service schedule

Required engine oil qualityAll countries with international service interval 3 164

Engine oil quality Petrol engines

dexos2 ✔

In case dexos quality is unavailable, you may use the oil qualities listed below:

All countries with international service interval 3 164

Engine oil quality Petrol engines

ACEA A3/B4 ✔

ACEA C3 ✔

Engine oil viscosity gradesAll countries with international service interval 3 164

Ambient temperature Petrol engines

down to -25 °C SAE 0W-30 or SAE 0W-40SAE 5W-30 or SAE 5W-40

below -25 °C SAE 0W-30 or SAE 0W-40

down to -20 °C SAE 10W-301) or SAE 10W-40

1) Permitted, but usage of SAE 5W-30 or SAE 5W-40 with dexos quality is recommended.

Technical data 171

Engine dataEngine identifier code D10XESales designation 1.0

Piston displacement [cm3] 999

Engine power [kW] 54

at rpm 6500

Torque [Nm] 95

at rpm 4500

Fuel type Petrol

Octane rating RON2)

recommended 95

possible 91

possible 98

Additional fuel type –

2) A country-specific label at the fuel filler flap can supersede the engine specific requirement.

172 Technical data

Vehicle dataMaximum speed [km/h] 170

Minimum / maximum kerb weight[kg] 3)

938 / 1034

Engine oilincluding filter [l]

3.5

Engine oilbetween MIN and MAX [l]

1.0

Fuel tankPetrol, refilling quantity [l]

32

3) Optional accessories increase the kerb weight.

Loading information 3 58.

Technical data 173

Vehicle dimensionsLength [mm] 3675

Width without exterior mirrors [mm] 1595 - 16324)

Width with two exterior mirrors [mm] 1876

Height (without antenna) [mm] without roof rack 1476 - 14954)

Length of load compartment floor [mm] 486

Length of load compartment with folded rear seats [mm] 1109

Load compartment width [mm] 968

Load compartment height with cover [mm] 499

Height of load compartment opening [mm] 608

Wheelbase [mm] 2385

Turning circle diameter [m]4) 9.8 - 10.7

4) Depending on equipment variants.

174 Technical data

Tyre pressuresComfort with up to 3 people ECO with up to 3 people With full load

Tyres front rear front rear front rear[kPa/bar]([psi])

[kPa/bar]([psi])

[kPa/bar]([psi])

[kPa/bar]([psi])

[kPa/bar]([psi])

[kPa/bar]([psi])

165/65 R14,185/55 R15,195/45 R16

220/2.2 (32) 210/2.1 (30) 270/2.7 (39) 250/2.5 (36) 260/2.6 (38) 300/3.0 (44)

Temporary spare wheelT105/70D14

420/4.2 (60)

Customer information 175

Customerinformation

Customer information ................ 175Declaration of conformity ......... 175REACH .................................... 178Software acknowledgement .... 178Registered trademarks ............ 179

Vehicle data recording and pri‐vacy ........................................... 180

Event data recorders ............... 180Radio Frequency Identification(RFID) ..................................... 183

Customer informationDeclaration of conformityRadio transmission systemsThis vehicle has systems thattransmit and / or receive radio wavessubject to Directive 2014/53/EU. Themanufacturers of the systems listedbelow declare conformity withDirective 2014/53/EU. The full text ofthe EU declaration of conformity foreach system is available at thefollowing internet address:www.opel.com/conformity.Importer isOpel / Vauxhall, Bahnhofsplatz,65423 Ruesselsheim am Main,Germany.

AntennaINFAC ELECSSaneop-ro 155beon-gi Gwonseon-gu, Suwon city, Gyeonggi-do, KoreaOperation frequency: N/AMaximum output: N/A

AntennaLairdDaimlerring 31, 31135 Hildesheim,GermanyOperation frequency: N/AMaximum output: N/A

ImmobiliserRobert Bosch GmbHRobert Bosch Platz 1, 70839Gerlingen, GermanyOperation frequency: 125 kHzMaximum output:5.1 dBµA/m @ 10 m

Infotainment system R 4.0 / Navi 4.0LG ElectronicsElectronics European Shared ServiceCenter B.V., Krijgsman 1, 1186 DMAmstelveen, The Netherlands

Operationfrequency (MHz)

Maximum output(dBm)

2400.0 - 2483.5 4

2400.0 - 2483.5 13

5725.0 - 5850.0 13

176 Customer information

Infotainment system MultimediaLG ElectronicsEuropean Shared Service CenterB.V., Krijgsman 1, 1186 DMAmstelveen, The Netherlands

Operationfrequency (MHz)

Maximum output(dBm)

2400.0 - 2483.5 8

2400.0 - 2483.5 16

5725.0 - 5875.0 9

Infotainment system R300 BTHumax Automotive Co. Ltd.2, Yeongmun-ro, Cheoin-gu, Yongin-si, Gyeonggi-do, KoreaOperation frequency: 2402 - 2480MHzMaximum output: 4 dBm EIRP

OnStar moduleLG ElectronicsElectronics European Shared ServiceCenter B.V., Krijgsman 1, 1186 DMAmstelveen, The Netherlands

Operationfrequency (MHz)

Maximum output(dBm)

2402 - 2480 4

2412 - 2462 18

880 - 915 33

1710 - 1785 24

1850 - 1910 24

1920 - 1980 24

2500 - 2570 23

Radio remote control transmitterContinental Automotive GmbHSiemensstraße 12, 93055Regensburg, GermanyOperation frequency: 433.92 MHzMaximum output: -5.7 dbmRobert Bosch GmbHRobert Bosch Platz 1, 70839Gerlingen, GermanyOperation frequency: 433.92 MHzMaximum output: -4 dbm

Radio remote control receiverRobert Bosch GmbHRobert Bosch Platz 1, 70839Gerlingen, GermanyOperation frequency: N/AMaximum output: N/A

Tyre pressure sensorsSchrader Electronics Ltd.11 Technology Park, Belfast Road,Antrim BT41 1QS, Northern Ireland,United KingdomOperation frequency: 433.92 MHzMaximum output: 10 dBm

Customer information 177

Jack

178 Customer information

REACHRegistration, Evaluation,Authorisation and Restriction ofChemicals (REACH) is a EuropeanUnion regulation adopted to improvethe protection of human health andthe environment from the risks thatcan be posed by chemicals. Visitwww.opel.com/reach for furtherinformation and for access to theArticle 33 communication.

Software acknowledgementCertain OnStar components includelibcurl and unzip software and otherthird party software. Below are thenotices and licenses associated withlibcurl and unzip and for other thirdparty software please see http://www.lg.com/global/support/opensource/index.

libcurlCopyright and permission noticeCopyright (c) 1996 - 2010, DanielStenberg, <[email protected]>.All rights reserved.

Permission to use, copy, modify, anddistribute this software for anypurpose with or without fee is herebygranted, provided that the abovecopyright notice and this permissionnotice appear in all copies.The software is provided "as is",without warranty of any kind, expressor implied, including but not limited tothe warranties of merchantability,fitness for a particular purpose andnoninfringement of third party rights.In no event shall the authors orcopyright holders be liable for anyclaim, damages or other liability,whether in an action of contract, tortor otherwise, arising from, out of or inconnection with the software or theuse or other dealings in the software.Except as contained in this notice, thename of a copyright holder shall notbe used in advertising or otherwise topromote the sale, use or otherdealings in this Software without priorwritten authorization of the copyrightholder.

unzipThis is version 2005-Feb-10 of theInfo-ZIP copyright and license. Thedefinitive version of this documentshould be available at ftp://ftp.info-zip.org/pub/infozip/license.htmlindefinitely.Copyright (c) 1990-2005 Info-ZIP. Allrights reserved.For the purposes of this copyright andlicense, “Info-ZIP” is defined as thefollowing set of individuals:Mark Adler, John Bush, Karl Davis,Harald Denker, Jean-Michel Dubois,Jean-loup Gailly, Hunter Goatley, EdGordon, Ian Gorman, Chris Herborth,Dirk Haase, Greg Hartwig, RobertHeath, Jonathan Hudson, PaulKienitz, David Kirschbaum, JohnnyLee, Onno van der Linden, IgorMandrichenko, Steve P. Miller, SergioMonesi, Keith Owens, GeorgePetrov, Greg Roelofs, Kai UweRommel, Steve Salisbury, DaveSmith, Steven M. Schweda, ChristianSpieler, Cosmin Truta, AntoineVerheijen, Paul von Behren, RichWales, Mike White.

Customer information 179

This software is provided “as is,”without warranty of any kind, expressor implied. In no event shall Info-ZIPor its contributors be held liable forany direct, indirect, incidental, specialor consequential damages arising outof the use of or inability to use thissoftware.Permission is granted to anyone touse this software for any purpose,including commercial applications,and to alter it and redistribute it freely,subject to the following restrictions:1. Redistributions of source code

must retain the above copyrightnotice, definition, disclaimer, andthis list of conditions.

2. Redistributions in binary form(compiled executables) mustreproduce the above copyrightnotice, definition, disclaimer, andthis list of conditions indocumentation and/or othermaterials provided with thedistribution. The sole exception tothis condition is redistribution of astandard UnZipSFX binary(including SFXWiz) as part of aself-extracting archive; that is

permitted without inclusion of thislicense, as long as the normalSFX banner has not beenremoved from the binary ordisabled.

3. Altered versions--including, butnot limited to, ports to newoperating systems, existing portswith new graphical interfaces, anddynamic, shared, or static libraryversions--must be plainly markedas such and must not bemisrepresented as being theoriginal source. Such alteredversions also must not bemisrepresented as being Info-ZIPreleases--including, but notlimited to, labeling of the alteredversions with the names “Info-ZIP” (or any variation thereof,including, but not limited to,different capitalizations), “PocketUnZip,” “WiZ” or “MacZip” withoutthe explicit permission of Info-ZIP.Such altered versions are furtherprohibited from misrepresentative

use of the Zip-Bugs or Info-ZIP e-mail addresses or of the Info-ZIPURL(s).

4. Info-ZIP retains the right to usethe names “Info-ZIP,” “Zip,”“UnZip,” “UnZipSFX,” “WiZ,”“Pocket UnZip,” “Pocket Zip,” and“MacZip” for its own source andbinary releases.

Registered trademarksApple Inc.Apple CarPlay™ is a trademark ofApple Inc.App Store® and iTunes Store® areregistered trademarks of Apple Inc.iPhone®, iPod®, iPod touch®, iPodnano®, iPad® and Siri® are registeredtrademarks of Apple Inc.Bluetooth SIG, Inc.Bluetooth® is a registered trademarkof Bluetooth SIG, Inc.DivX, LLCDivX® and DivX Certified® areregistered trademarks of DivX, LLC.

180 Customer information

EnGIS Technologies, Inc.BringGo® is a registered trademark ofEnGIS Technologies, Inc.Google Inc.Android™ and Google Play™ Storeare trademarks of Google Inc.Stitcher Inc.Stitcher™ is a trademark of Stitcher,Inc.Verband der Automobilindustrie e.V.AdBlue® is a registered trademark ofthe VDA.

Vehicle data recordingand privacyEvent data recordersElectronic control units are installed inyour vehicle. Control units processdata which is received by vehiclesensors, for example, or which theygenerate themselves or exchangeamongst themselves. Some controlunits are necessary for the safefunctioning of your vehicle, othersassist you while you drive (driverassistance systems), while othersprovide comfort or infotainmentfunctions.The following contains generalinformation about data processing inthe vehicle. You will find additionalinformation as to which specific datais uploaded, stored and passed on tothird parties and for what purpose inyour vehicle under the key word DataProtection closely linked to thereferences for the affected functionalcharacteristics in the relevant owner'smanual or in the general terms ofsale. These are also available online.

Operating data in the vehicleControl units process data foroperation of the vehicle.This data includes, e.g.:● vehicle status information (e.g.

speed, movement delay, lateralacceleration, wheel rotation rate,"seat belts fastened" display)

● ambient conditions (e.g.temperature, rain sensor,distance sensor)

As a rule such data is transient, notstored for longer than an operationalcycle, and only processed on boardthe vehicle itself. Control units ofteninclude data storage (including thevehicle key). This is used to allowinformation to be documentedtemporarily or permanently on vehiclecondition, component stress,maintenance requirements andtechnical events and errors.

Customer information 181

Depending on technical equipmentlevel, the data stored is as follows:● system component operating

states (e.g. fill level, tyrepressure, battery status)

● faults and defects in importantsystem components (e.g. lights,brakes)

● system reactions in specialdriving situations (e.g. triggeringof an airbag, actuation of thestability control systems)

● information on events damagingthe vehicle

● for electric vehicles the amount ofcharge in the high-voltagebattery, estimated range

In special cases (e.g. if the vehiclehas detected a malfunction), it may benecessary to save data that wouldotherwise just be volatile.When you use services (e.g. repairs,maintenance), the operating datasaved can be read together with thevehicle identification number andused when necessary. Staff workingfor the service network (e.g. garages,manufacturers) or third parties (e.g.

breakdown services) can read thedata from the vehicle. The sameapplies to warranty work and qualityassurance measures.Data is generally read via the OBD(On-Board Diagnostics) portprescribed by law in the vehicle. Theoperating data which is read out,documents the technical condition ofthe vehicle or individual componentsand assists with fault diagnosis,compliance with warranty obligationsand quality improvement. This data,in particular information oncomponent stress, technical events,operator errors and other faults, istransmitted to the manufacturerwhere appropriate, together with thevehicle identification number. Themanufacturer is also subject toproduct liability. The manufacturerpotentially also uses operating datafrom vehicles for product recalls. Thisdata can also be used to checkcustomer warranty and guaranteeclaims.Fault memories in the vehicle can bereset by a service company whencarrying out servicing or repairs or atyour request.

Comfort and infotainmentfunctionsComfort settings and custom settingscan be stored in the vehicle andchanged or reset at any time.Depending on the equipment level inquestion, these include● seat and steering wheel position

settings● chassis and air conditioning

settings● custom settings such as interior

lightingYou can input your own data in theinfotainment functions for yourvehicle as part of the selectedfeatures.Depending on the equipment level inquestion, these include● multimedia data such as music,

videos or photos for playback inan integrated multimedia system

● address book data for use with anintegrated hands-free system oran integrated navigation system

182 Customer information

● input destinations● data on the use of online services

This data for comfort andinfotainment functions can be storedlocally in the vehicle or be kept on adevice that you have connected to thevehicle (e.g. a smartphone, USB stickor MP3 player). Data that you haveinput yourself can be deleted at anytime.This data can only be transmitted outof the vehicle at your request,particularly when using onlineservices in accordance with thesettings selected by you.

Smartphone integration, e.g.Android Auto or Apple CarPlayIf your vehicle is equippedaccordingly, you can connect yoursmartphone or another mobile deviceto the vehicle so that you can controlit via the controls integrated in thevehicle. The smartphone image andsound can be output via themultimedia system in this case. At thesame time, specific information istransmitted to your smartphone.Depending on the type of integration,

this includes data such as positiondata, day / night mode and othergeneral vehicle information. For moreinformation, please see the operatinginstructions for the vehicle /infotainment system.Integration allows selectedsmartphone apps to be used, such asnavigation or music playback. Nofurther integration is possiblebetween smartphone and vehicle, inparticular active access to vehicledata. The nature of further dataprocessing is determined by theprovider of the app used. Whetheryou can define settings, and if sowhich ones, is dependent on the appin question and your smartphone'soperating system.

Online servicesIf your vehicle has a radio networkconnection, this allows data to beexchanged between your vehicle andother systems. The radio networkconnection is made possible bymeans of a transmitter device in yourvehicle or a mobile device providedby you (e.g. a smartphone). Onlinefunctions can be used via this radionetwork connection. These includeonline services and applications /apps provided to you by themanufacturer or other providers.

Proprietary servicesIn the case of the manufacturer'sonline services, the relevant functionsare described by the manufacturer inan appropriate location (e.g. Owner'sManual, the manufacturer's website)and the associated data protectioninformation is provided. Personaldata may be used to provide onlineservices. Data exchange for thispurpose takes place via a protectedconnection, e.g. using themanufacturer's IT systems providedfor the purpose. Collection,

Customer information 183

processing and use of personal datafor the purposes of preparation ofservices take place solely on thebasis of legal permission, e.g. in thecase of a legally prescribedemergency communication system ora contractual agreement, or by virtueof consent.You can activate or deactivate theservices and functions (which aresubject to charges to some extent)and, in some cases, the vehicle'sentire radio network connection. Thisdoes not include statutory functionsand services such as an emergencycommunication system.

Third party servicesIf you make use of online servicesfrom other providers (third parties),these services are subject to theliability and data protection and usageconditions of the provider in question.The manufacturer frequently has noinfluence over the content exchangedin this regard.

Therefore, please note the nature,scope and purpose of the collectionand use of personal data within thescope of third party services providedby the service provider in question.

Radio FrequencyIdentification (RFID)RFID technology is used in somevehicles for functions such as tyrepressure monitoring and immobiliser.It is also used in connection withconveniences such as radio remotecontrols for door locking / unlockingand starting. RFID technology in Opelvehicles does not use or recordpersonal information or link with anyother Opel system containingpersonal information.

184

Index AAccessories and vehicle

modifications .......................... 126Adjustable air vents ................... 102Airbag and belt tensioners ........... 70Airbag deactivation ................ 45, 70Airbag label................................... 40Airbag system .............................. 40Air conditioning regular

operation ................................ 103Air conditioning system ................ 97Air intake .................................... 103Air vents...................................... 102Antilock brake system ................ 112Antilock brake system (ABS) ....... 72Anti-theft alarm system ................ 27Appearance care........................ 161Ashtrays ....................................... 64Autostop..................................... 107

BBattery discharge protection ........ 95Battery voltage ............................. 83Belts.............................................. 38Bonnet ....................................... 128Bonnet open................................. 74Brake and clutch fluid................. 165Brake and clutch system ............. 71Brake assist ............................... 113Brake fluid .................................. 131

Brakes ............................... 112, 131Breakdown.................................. 160Bulb replacement ....................... 134

CCatalytic converter ..................... 110Central locking system ................ 22Centre console storage ............... 53Centre high-mounted brake light 138Changing tyre and wheel size . . . 150Charging system .......................... 71Child locks ................................... 24Child restraint installation

locations ................................... 49Child restraints.............................. 46Child restraint systems ................ 46Cigarette lighter ........................... 64City mode................................... 115Climate control ............................. 17Climate control systems............... 96Clock ............................................ 62Code............................................. 81Control indicators.......................... 67Control of the vehicle ................. 104Controls........................................ 60Coolant and antifreeze............... 165Cornering lights............................ 91Cruise control ...................... 74, 117Cupholders .................................. 52Curtain airbag system .................. 45

185

DDanger, Warnings and Cautions . . . 4Daytime running lights ................. 91Declaration of conformity............ 175Door open .................................... 75Doors............................................ 25Driver assistance systems.......... 117Driver Information Centre............. 75Driving hints................................ 104

EElectric adjustment ...................... 28Electrical system......................... 140Electronic climate control system 99Electronic Stability Control.......... 115Electronic Stability Control and

Traction Control system............ 72Electronic Stability Control off....... 72End-of-life vehicle recovery ....... 127Engine compartment fuse box ... 141Engine coolant ........................... 130Engine coolant temperature ........ 73Engine coolant temperature

gauge ....................................... 66Engine data ............................... 171Engine exhaust .......................... 110Engine identification................... 168Engine oil ................... 129, 165, 169Engine oil pressure ...................... 73Event data recorders.................. 180

Exit lighting .................................. 94Exterior care .............................. 161Exterior light ................................. 74Exterior lighting ...................... 14, 90Exterior mirrors............................. 28

FFirst aid......................................... 57First aid kit ................................... 57Fixed air vents ........................... 103Folding mirrors ............................. 28Front airbag system ..................... 43Front doors................................... 25Front fog lights ............... 74, 92, 136Front seats.................................... 35Front turn lights .......................... 136Fuel............................................. 122Fuel for petrol engines ............... 122Fuel gauge ................................... 65Fuses ......................................... 140

GGauges......................................... 64Gear shifting................................. 72Glovebox ..................................... 52

HHalogen headlights .................... 134Hand brake......................... 112, 113Hazard warning flashers .............. 91Headlight flash ............................. 90

Headlight range adjustment ........ 91Headlights..................................... 90Headlights when driving abroad . . 91Head restraint adjustment ............. 8Head restraints ............................ 34Heated mirrors ............................. 29Heated rear window ..................... 32Heated steering wheel ................. 60Heating ........................................ 37Heating and ventilation system . . . 96High beam ............................. 74, 90Hill start assist ........................... 113Horn ....................................... 15, 61

IIdentification plate ..................... 168Ignition switch positions ............. 105Immobiliser ............................ 27, 74Indicators...................................... 64Info Display................................... 80Information displays...................... 75Instrument cluster ........................ 64Instrument panel fuse box ......... 143Instrument panel illumination ..... 139Instrument panel illumination

control ...................................... 93Instrument panel overview ........... 10Interior care ............................... 163Interior lighting.............................. 93Interior lights ........................ 94, 139

186

Interior mirrors.............................. 29Introduction .................................... 3

JJump starting ............................. 159

KKey, memorised settings.............. 22Keys ............................................. 20Keys, locks................................... 20

LLane departure warning....... 72, 121Light switch .................................. 90Load compartment ................ 25, 53Load compartment cover ............. 55Loading information ..................... 58Low fuel ....................................... 74

MMalfunction indicator light ............ 71Manual adjustment ...................... 28Manual anti-dazzle ...................... 29Manual transmission .................. 111Manual windows .......................... 30Memorised settings...................... 22Mirror adjustment ........................... 8Mirrors ......................................... 28Misted light covers ....................... 93

NNew vehicle running-in .............. 105Number plate light ..................... 139

OObject detection systems........... 119Odometer ..................................... 65Oil, engine.......................... 165, 169OnStar.......................................... 86Operate pedal............................... 71Outside temperature .................... 62Overrun cut-off ........................... 107

PParking ................................ 19, 109Parking assist ...................... 72, 119Parking brake ............................ 113Parking lights ............................... 93Performing work ........................ 128Power outlets ............................... 64Power steering.............................. 72Power windows ............................ 30Puncture..................................... 155

RRadio Frequency Identification

(RFID)..................................... 183Radio remote control ................... 21REACH....................................... 178Reading lights .............................. 94Rear doors ................................... 25

Rear floor storage cover .............. 56Rear fog light ................. 74, 92, 137Rear window wiper and washer . . 62Recommended fluids and

lubricants ........................ 165, 169Reduced engine power................ 74Refuelling ................................... 123Registered trademarks............... 179Retained power off..................... 106Reversing lights ........................... 93Ride control systems.................. 114Roof.............................................. 32Roof load...................................... 58Roof rack ..................................... 57

SSafety belts................................... 38Seat adjustment ....................... 7, 36Seat belt ........................................ 8Seat belt reminder ....................... 70Seat belts ..................................... 38Seat heating................................. 37Seat position ................................ 35Service ....................................... 103Service display ............................ 66Service information .................... 164Service vehicle soon .................... 71Side airbag system ...................... 44Sidelights...................................... 90Side turn lights ........................... 138

187

Software acknowledgement....... 178Spare wheel ............................... 155Speed limiter......................... 74, 118Speedometer ............................... 64Starting and operating................ 105Starting off ................................... 18Starting the engine .................... 107Steering...................................... 105Steering wheel adjustment ...... 9, 60Steering wheel controls ............... 60Stop-start system........................ 107Storage......................................... 52Storage compartments................. 52Sunroof ........................................ 32Sun visors .................................... 32Symbols ......................................... 4

TTachometer ................................. 65Tail lights ................................... 137Three-point seat belt .................... 39Tools .......................................... 144Towing........................................ 160Towing the vehicle ..................... 160Traction Control system ............. 114Traction Control system off........... 73Transmission ............................... 17Tread depth ............................... 150Trip odometer .............................. 65Turn lights .............................. 69, 92

Tyre chains ................................ 151Tyre designations ...................... 145Tyre pressure ............................ 146Tyre pressure monitoring

system............................... 73, 147Tyre pressures ........................... 174Tyre repair kit ............................. 151

UUpholstery.................................. 163Using this manual .......................... 3

VValet mode................................... 80Vehicle battery ........................... 131Vehicle checks............................ 128Vehicle data........................ 169, 172Vehicle data recording and

privacy..................................... 180Vehicle dimensions .................... 173Vehicle Identification Number .... 167Vehicle jack................................ 144Vehicle messages ....................... 81Vehicle personalisation ............... 83Vehicle specific data ...................... 3Vehicle storage........................... 127Vehicle tools............................... 144Vehicle unlocking ........................... 6Ventilation..................................... 96

WWarning chimes ........................... 83Warning lights............................... 64Warning triangle .......................... 56Washer and wiper systems ......... 15Washer fluid ............................... 131Wheel changing ......................... 154Wheel covers ............................. 150Wheels and tyres ....................... 145Windows....................................... 30Windscreen................................... 30Windscreen wiper and washer .... 61Winter tyres ............................... 145Wiper blade replacement .......... 133

188

www.opel.com

Copyright by Opel Automobile GmbH, Rüsselsheim, Germany.

The information contained in this publication is effective as of the date indicated below. Opel Automobile GmbH reserves the right to make changes to the technical specifications, featuresand design of the vehicles relative to the information in this publication as well as changes to the publication itself.

Edition: June 2018, Opel Automobile GmbH, Rüsselsheim.

Printed on chlorine-free bleached paper.

*ID-OKAAOBSE1806-EN*

ID-OKAAOBSE1806-en