Kanti Mohwati

Applied Technology and Trades 2013Faculty of Technology and Built Environment

Content

Welcome to Unitec 01

Explore your options 02 » Automotive engineering, welding and

fabrication 04 » Building, furniture and cabinetmaking 08 » Electrical and electronics engineering 14 » Marine technology 18 » Plumbing, gasfitting and drainlaying 22

Study Options » Pre-employment education 27

› Automotive engineering 28 › Welding and fabrication 31 › Boatbuilding 32 › Building technology 33 › Electrical and electronics engineering 36 › Furniture and cabinetmaking 40 › Marine engineering systems 41 › Plumbing and gasfitting 42

» Bachelor of Applied Technology › Automotive Engineering 43 › Building 44 › Electrotechnology 45 › Marine 46

» National certificates 47 › Carpentry 48 › Drainlaying 49 › Electrical engineering 50 › Motor industry 51 › Plumbing and gasfitting 54

» Short courses and professional development 55

General info » Admission requirements 56 » Fees and loans 66

Everything you need on campus 69

Experience it for yourself 70

How to apply 72

2013 calendar 73

» contact us for more info on 0800 10 95 10 or visit us online at www.unitec.ac.nz. » www.facebook.com/unitecnz » www.twitter.com/unitecnz » www.youtube.com/unitecnz

Cover: Tuiti Hui Certificate in Applied Technology (Carpentry) graduate and Diploma in Applied Technology (Building) student

1

Welcome to UnitecNau mai, Haere mai ki Te Whare Wānanga o Wairaka

We're passionate about the power of education to change lives. New careers, new skills, new opportunities – there are many ways to change your life at Unitec. There are 160 programmes on offer and thousands of possible careers. From accounting to zookeeping, and boatbuilding to photography.

But no matter what you study, our programmes are career focused, industry recognised and full of hands-on experience. Many of them include work experience, field trips or visits from industry experts. Which means when you go out in the workplace, you'll be ready to hit the ground running.

We know each student is different. After all, we have 23,000 of them – of all ages, from over 80 countries, and with different hopes and dreams. That's why we're flexible. With full-time or part-time study options, programmes from certificate to postgraduate level, and three campuses across Auckland. And if you need some extra support to help you make the most of your time with us, that's no problem either.

But life isn’t all about work. There’s a huge range of social events on campus. Enjoy the music at Sounds in the Sun, bring your whānau to Kids’ Day Out or join one of the many clubs on campus. One thing’s for sure, your social calendar will fill up in no time!

3

Explore your options

Trades make money. From boatbuilding to plumbing and carpentry to automotive – working in a trade could earn you the kind of money you’ve probably only ever dreamt about. Sure, perhaps not from day one – you need to be fully qualified first. But a few years down the track and you’ll be well on your way towards a very rewarding career. And there’s lot of variety too. No two jobs are the same. You’ll meet new people, pick up a skill or two and probably get to drive around in a nice big truck. Working in a trade sure beats being stuck behind a desk all day!

So how do you get started? An apprenticeship is usually your first step. Often that involves completing a certain amount of on-the-job training and a set number of theory hours before you can become registered in your trade. Got your apprenticeship lined up already? Then enrol in the ITaB’s one -day -a -week class to cover the theory hours you need to become fully qualified. And if you’re still looking for an apprenticeship, why not enrol in one of our pre-apprenticeship training programmes? It could shorten your apprenticeship. It also improves your chance of finding a job or an apprenticeship. And who knows, you may even meet your future employer through us.

Unitec is New Zealand’s largest trade-training provider. Sounds pretty impressive, doesn’t it? Well, it is. We’ve trained thousands of apprentices and tradespeople. Industry knows us fairly well, and employers often come to us to look for fresh recruits. Some of them also donate material for you to practise on. They also make sure that our courses teach you exactly what you’ll need once you’re working in your trade. Which is why our qualifications are recognised both in New Zealand and around the world. And which is why you can be sure that with a Unitec qualification you’ll be on the road to a big, bright future with the potential to make lots of money.

You can be sure that with a Unitec qualification you’ll be on the road to a big, bright future.

4

Automotive engineering, welding and fabricationAutomotive engineeringThere are four million registered vehicles in New Zealand. And as our population grows, so will the number of vehicles on the road. Vehicles move people and goods, and are key to making the economy work and essential for the wellbeing of New Zealanders. They’re becoming increasingly sophisticated too, with anti-lock braking systems, fuzzy logic, automatic transmissions, engine parameters, safety systems, climate control and in-car entertainment. The automotive industry is diverse and interesting. And with plenty of potential for growth.

We’re experts in automotive engineering. After all, we’ve been teaching it for 30 years. Today, Unitec graduates work across the industry. As mechanics, auto electricians, automotive engineers, vehicle compliance certifiers, high-performance technicians, traffic accident analysts, and logistics and technical managers. Many of them have opened their own business. Join us and one day you might too.

Industry knows us well. That’s why our students can become members of the Institute of Automotive Mechanical Engineers (IAME). And once you’ve graduated, you can apply to become an Associate Member of the Society of Automotive Engineers Australasia.

There’ll be lots of time in our automotive workshops and laboratories. You’ll pull apart engines, find faults and see how it all works. There may also be work experience in a local automotive company. It’s a great chance to see how an automotive diagnostics and repair centre works. And who knows, it may even lead to a job offer or an apprenticeship.

Welding and fabricationWelding and fabrication are essential for many industries. You find welders and fabrication engineers in automotive workshops, construction companies, boat or ship builders, and engineering companies. They work on bridge construction, for heavy machinery contractors, and even on airplanes. Many of them set up their own business. And quite a few use their welding certificate as a passport to overseas travel.

Welding isn’t something you can learn from a book. That’s why workshop projects are a big part of our programmes. You’ll spend many hours in our workshops, equipped with modern machinery like metal inert gas (MIG) and tungsten inert gas (TIG) welders, plasma cutters, profile cutters and manual metal arc welders. Once you feel confident, you get to work with real industry welders and create fully fitted trailers and other components, with help from our expert staff. Hire companies eagerly buy these products each year.

We’re a member of the Heavy Engineering Research Association of New Zealand (HERA), the industry organisation for metal industries like welding. There are many industry experts on our advisory committee too. They make sure that what you learn is exactly what you’ll need for your career.

5

Start with a programme that suits your qualifications and/or experience, then progress to a level that achieves your goals. Check the programme admission requirements for details.

Study path

* Not included in this brochure. For information on this programme call us on 0800 10 95 10 or visit www.unitec.ac.nz

Doct

orat

eLevel 7

Level 3

Level 2

Level 4

Shor

t cou

rses

National Certificate in Motor Industry (Entry Skills)

National Certificate in Motor Industry (Automotive

Engineering)

Certificate in Applied Technology (Automotive

Engineering)

Certificate in Foundation Studies (Level 3):

Whitinga*

National Certificate in Motor Industry (Automotive

Electrical Engineering)

Certificate in Applied Technology (Autotronics)

Certificate in Automotive and Mechanical

Engineering

AutomotiveShortcourses

Bachelor of Applied Technology (Specialise in Automotive Engineering)

Exit award: Diploma in Applied Technology

(Automotive Engineering)

Certificate in Applied Technology (Welding and

Fabrication)

7

Mike ShawAutomotive Technician, Giltrap City ToyotaCertificate in Applied Technology (Automotive Engineering) graduateNational Certificate in Motor Industry (Automotive Engineering) graduateNational Certificate in Motor Industry (Automotive Electrical Engineering) student “I’ve always been interested in fixing things and wanted to know how to repair my own car to save costs. One of the things I enjoy most about my job is working on troublesome jobs that take a little bit of time to figure out. It’s great to be able to diagnose the problem and then being able to repair it. One of the highlights of my career so far is becoming a Hybrid Elite Technician and finishing my apprenticeship. It wasn’t always easy and sometimes it felt like the longest year and a half of my life – but I’ve done it and I’m proud of it. I also enjoyed being able to fly to Palmerston North to attend Toyota School and become a Toyota Technician. That was pretty cool."

8

Builders, and furniture and cabinetmakers work on projects of all sizes. Residential and commercial buildings, tables, cabinets, the interiors of boats…. there are plenty of opportunities out there. And if you want to make the most of them, you’ll need a qualification.

Study at the Department of Building Technology and you won’t just learn the theory. We like to create things with our hands. Which means that you’ll spend many hours in our well-equipped workshops. Certificate in Applied Technology (Carpentry) students also build new houses on campus, which are sold to the public once they’re completed. And if you’re studying the Certificate in Applied Technology (Carpentry) or Diploma in Applied Technology (Building), the Unitec Apprenticeship Training Trust could even help you find an apprenticeship.

Building, furniture and cabinetmaking

Residential and commercial buildings, tables, cabinets, the

interiors of boats… there are plenty of opportunities.

We’re on a first name basis with the big players in the building industry. The Certified Builders Association of New Zealand, Registered Master Builders Federation and Building Officials Institute of New Zealand are all on our frequent caller list. As are the Joinery Industry Training Organisation (JITO) and Master Joiners. For you this means that what you learn in our building, and furniture and cabinetmaking programmes reflects best industry practice, and the latest technology, methods and materials.

9


Study path

Doct

orat

eSh

ort c

ours

es

Level 7

Level 3

Level 2

Level 6

Level 4

Bachelor of Applied Technology (Specialise in

Building)


Whitinga*

Certificate in Multiskill Building Construction

Diploma in Applied Technology (Building)

Certificate in Applied Technology (Furniture and

Cabinetmaking)

Certificate in Applied Technology (Carpentry)

National Certificate in Carpentry

National Certificate in Furniture Making #

Bachelor of Construction (Construction Economics,

Construction Management, Property Development)*

Shortcourses

Carpentry

# Not included in this brochure. Please go to www.fitec.org.nz * Not included in this brochure. For information on this programme call us on 0800 10 95 10 or visit www.unitec.ac.nz

Kartika MutzelburgApprentice Carpenter, Sanson-Beattie BuildersCertificate in Applied Technology (Carpentry) graduateDiploma in Applied Technology (Building) studentBachelor of Construction (Quantity Surveying/Property Development) student“Last year, I won the first ever Third Year Apprentice Challenge organised by the Certified Builders Association of New Zealand and the Industry Training Association Building. To win something like this was amazing! Because I was the only female apprentice there was quite a bit of interest in me, but I didn’t want it to be about me but rather about the skills I demonstrated. I had wanted to go into building for a long time but I was told it wasn’t a suitable job choice, so I did other things but it was always there at the back of my mind. I was told that I wouldn’t be able to handle the physical side of the job, and that I would get hassled on site by the guys – neither of which have proven to be the case at all. The Unitec Apprenticeship Training Trust made sure that I’m working in an environment where I am able to learn and feel comfortable. I hadn’t had any previous carpentry experience, and the certificate taught me all the skills I would need. My goal is to eventually run my own business. I’m not naïve to think that this is going to happen for me straight away, I know I have to prove myself in the industry but it’s nice to have something like this award to help me along the way.”

11Kartika with her host employer Justin Sanson-Beattie

13

Bhavesh Patel Cabinetmaker, Simply Wood, Avondale, AucklandCertificate in Applied Technology (Furniture and Cabinetmaking) graduate

National Certificate in Furniture Making student“The small working groups made it easy for more one-on-one time with our tutor. Everyone got a unique learning experience. The tutor took time out at the beginning of the programme to really find out what we wanted from the programme. He always emphasised our reasons for being there and made sure we were working towards achieving our goal. I also enjoyed meeting and working with people from every walk of life; it was a real learning experience. My Unitec certificate has been very relevant to my career. The market was troubled at the time, and my qualification made me more appealing to employers. I like that in my role I’m supporting New Zealand made furniture, made out of New Zealand timbers. At the same time, I’m recycling by working with reclaimed timber.”

Electrical and electronics engineering

Life without electricity? We can’t even imagine it. Today, technology is everywhere. In appliances, telecommunications, security systems, fibre optics and smart buildings. And skilled electrical, electronics and audio-visual engineers and technicians are in demand. They design circuits, install alarms, research laser technology and telecommunications, work on the electrical control of industrial machinery and the design of household appliances, and diagnose problems. They’re even responsible for wiring ships and airplanes. And they work on the occasional stage show or movie set too.

Interested in electrical and electronics engineering? Unitec’s Department of Electrotechnology can help you spark a bright future. All our programmes focus on you and your needs. It’s self-paced and interactive learning, a mix of theory and practice. And most importantly, it’s a launching pad into exciting careers.

Practice makes perfect. That’s why you’ll work on practical projects and design programmable logic controller systems. It’s also why you’ll spend many hours in our workshops and laboratories. It’s a great place to try out the latest electronics software, workbench-simulated circuits, mechatronics/electronic workbenches and lab volt electronic computer hardware – provided by our industry sponsor Schneider Electric. It’s also ideal for sharing ideas with our staff. They’re experts in electrical, electronics and computer engineering. And bright sparks, the lot of them.

Today, technology is everywhere. In appliances,

telecommunications, security systems, fibre

optics and smart buildings.

14

15


Study path

Level 7

Level 3

Level 4

Bachelor of Applied Technology (Specialise

in Electrotechnology) Exit award: Diploma

in Applied Technology (Electrotechnology)


Whitinga*

Certificate in Electrical and Electronic Engineering

National Certificate in Electronical Engineering

(Electrician) (Levels 2, 3 and 4)

Certificate in Applied Technology (Electrical

Engineering)

Certificate in Applied Technology (Electronics

Engineering)

Certificate in Applied Technology (Audio-Visual

Technician)

Shortcourses

Electrical and electronics

Doct

orat

eSh

ort c

ours

es


Sparking off new opportunities

17

Brian JellickApprentice Electrician, Intermech LtdCertificate in Electrical and Electronics graduate (now the Certificate in Electrical and Electronic Engineering) Certificate in Applied Technology (Electrical Engineering) graduateNational Certificate in Electrical Engineering (Electrician) student“I had always been interested in learning a trade, but for a long time my focus was playing rugby league. I was fortunate enough to play with teams like the North Queensland Cowboys and the Kiwis. Once I finished playing and we returned to Auckland I decided to try Unitec’s electrical engineering programme. I was conscious of being a mature student, but the lecturers and the dynamics of the students made me feel comfortable. I liked the hands-on learning and not having to sit in a classroom all day reading. Now I work as an apprentice electrician for Intermech, a leading provider of compressed natural gas refuelling solutions. I get to fault find and test electrical components to ensure everything is running correctly before a package is exported to a customer overseas. Next, I want to complete all the on-the-job standards I need to become a registered electrician.”

18

Marine technology

Four in ten Kiwis own a boat. It’s obvious: boating is big. In fact, the marine industry is one of New Zealand’s largest manufacturing industries, with over $1.5 billion in sales. And the future is looking bright: production is expected to double over the next 15 years. That’s a lot of work for qualified boatbuilders, marine engine technicians, power boat engineers and marine craft designers.

Unitec marine graduates are everywhere. You find them in many America’s Cup teams, including Emirates Team New Zealand. Many of them work on high-performance racing yachts. Some have even worked on internationally acclaimed super yachts.

Our staff are one reason for this graduate success. They have experience across a range of projects, including America’s Cup and Volvo Ocean Race boats. They know how to build winning boats and maintain powerful marine engines. With their help, you’ll learn to do the same. And so you can see the type of work you could do once you graduate, there’s the opportunity for work experience and visits to local employers during your studies.

We work closely with the New Zealand Marine Industry Association and the Royal Institution of Naval Architects. That’s why all courses incorporate the latest industry trends. It’s also why the Certificate in Applied Technology (Boatbuilding) and the Certificate in Applied Technology (Marine Engineering Systems) are endorsed by the New Zealand Marine Industry Training Organisation, and the Bachelor of Applied Technology (specialising in Marine) by the Royal Institution of Naval Architects.

Boating is big. In fact, the

marine industry is one of New

Zealand’s largest manufacturing

industries.

19


Study path

Level 7

Level 3

Level 4

Shor

t cou

rses

Bachelor of Applied Technology

(Specialise in Marine) Exit award: Diploma in

Applied Technology (Marine)


Whitinga*

National Certificate in Boatbuilding #

Certificate in Applied Technology (Boatbuilding)

National Certificate in Boatbuilding (Marine

Systems Engineering) #

Certificate in Applied Technology (Marine

Engineering Systems)

Doct

orat

e

# Not included in this brochure. Please go to www.nzmito.com * Not included in this brochure. For information on this programme call us on 0800 10 95 10 or visit www.unitec.ac.nz

I love that every day in my job is different and poses new challenges.

21

Sam GouldMarine Engineering Technician, Miller Moyes MarineCertificate in Applied Technology (Marine Engineering Systems) graduate “The reason why I’ve chosen this career path is because I enjoy the marine environment, and engines have always interested me. To me, marine engineering looked like a great way to combine the two things I like. It’s a career path that should be exciting, fascinating and fulfilling. I love that every day in my job is different and poses new challenges. I’m always learning new things. My Unitec certificate is one hundred percent relevant to my work now. I enjoyed the hands-on approach to the programme – it enabled me to gain a better understanding of mechanics. And the support of the tutors was great. They were always there to help us out. I wouldn’t be in the job I have now without the knowledge I picked up at Unitec. My plan is to further my career in the marine industry and maybe move into bigger engines and larger boats. There are so many opportunities!”

22

Plumbing, gasfitting and drainlaying

A house without plumbing? Probably not the kind of house you’d want to live in. Showers, sinks, hot water cylinders, washing machines… today’s houses need plenty of plumbing and gasfitting work. Which means lots of work for plumbers, gasfitters and drainlayers.

Study plumbing and gasfitting at Unitec and it’s almost like working on actual plumbing, gasfitting and drainlaying jobs. You’ll complete a range of tasks at our Plumbing and Gasfitting Training and Assessment Centre, under the watchful eyes of your lecturers. There’s also our hydraulics lab with a glass piping system to demonstrate the flow of wastewater systems. It’s the only one of its kind

in Australasia. We also have specialist gas labs with fully operational commercial and domestic gas appliances, a dedicated drainlaying building, sheetmetal workshop and a fully equipped welding workshop. And then there’s our online learning programme, a world-class learning resource with fun multimedia features.

Much of our teaching material is donated by the industry. Plumbing and gasfitting companies also come in to demonstrate the latest products and how to install them. And not just any companies, but major industry players like Marley, Rheem, Rinnai, Methven, Hydroflow, Dux, Buteline, Apex Valves, Aquatherm, RMC and Tyco.

Showers, sinks, hot water cylinders, washing machines… today’s houses need plenty of plumbing and gasfitting work.

23


Study path

Doct

orat

eSh

ort c

ours

es

Level 4

Level 2

Level 3

National Certificate in Plumbing and Gasfitting

Certificate in Applied Technology (Plumbing and

Gasfitting)

National Certificate in Drainlaying



Whitinga*

Shortcourses

Plumbing and gasfitting


24

25

Desmond ZuccaniApprentice Plumber, Allstar PlumbingCertificate in Applied Technology (Plumbing and Gasfitting) graduateNational Certificates in Plumbing and Gasfitting student“I wanted to get a recognised trade qualification that I could take anywhere in the world with me. It’s a fantastic programme for the theory side of things. When we were doing the plumbing for the houses built by Unitec carpentry students, the theory work that we’d done leading up to that point was really helpful. I also found that most of the work covered in the bay workshop can be applied to our everyday work. This was a change of career for me and it’s something I’m really enjoying. You get to meet some great people working in other trades, and your friends will always invite you over for dinner, with the hidden agenda to look at work they want done. Next, I want to get my registration for plumbing and gasfitting, and either start my own company or take my skills overseas.”

Applied Technology and TradesStudy options

27

Pre-employment educationOverview

Unitec’s pre-employment education programmes can prepare you for an apprenticeship or traineeship. If you want to become an apprentice but haven’t managed to find a job with a suitable employer, we recommend you study our Certificate in Applied Technology first:

» Study at Unitec for three or four days a week for 32 weeks.

» In just one year you get a good overview of your trade.

» Completing pre-employment education may shorten your apprenticeship: when you’ve successfully completed your Certificate in Applied Technology you can apply to NZQA for cross-credits towards your national certificate. This may reduce the hours or years you need to complete your qualification.

» Closely linked with the relevant trade industries who acknowledge the benefits of employing our graduate apprentices.

» You’ll pick up the knowledge and practical skills to hit the ground running, which means you have a better chance to find an apprenticeship or traineeship.

» Industry contacts: because we work closely with the trade industries you may even meet your future employer through us.

» If you’re enrolled in the Certificate in Applied Technology (specialising in carpentry, or furniture and cabinetmaking) or the Diploma in Applied Technology (Building), the Unitec Apprenticeship Training Trust may be able to find you an apprenticeship. To find out more visit www.apprentice.unitec.ac.nz.

» Learn from industry-experienced lecturers in a supportive environment.

» You have access to our trade facilities.

Once you start work as an apprentice you can complete your national certificate to become fully registered in your trade (see page 47).

28 Study options Automotive engineering

Certificate in Automotive and Mechanical Engineering

Level 3, 120 creditsDuration Full-time for one year Starts February or JulyIndicative fee $4436Campus Mt Albert or Northern

www.automotive.unitec.ac.nzemail [email protected] 0800 10 95 10

Develop the skills to interpret general servicing schedules, and carry out customer and administrative services. Learn about general engineering principles, processes and workshop practices, and fundamental principles of general automotive systems. The Certificate in Automotive and Mechanical Engineering is also designed to increase your communication, literacy, mathematics and computer skills.

Highlights » An entry-level programme designed to give you

a solid introductory grounding for a career in the automotive and mechanical engineering industry.

» Cross-credits towards your apprenticeship. » Access to Unitec’s automotive and engineering

facilities, which include automotive and mechanical engineering workshops equipped with industry-standard resources.

Courses include » TTEC3201 Electrical Technology » TTEC3202 Engine Technology » TTEC3203 Engineering Technology » TTEC3204 Industry Practice » TTEC3205 Internal Combustion Engine » TTEC3206 Vehicle Technology

For detailed course information visit www.automotive.unitec.ac.nz.

Career opportunities » Apprentice mechanic » Apprentice mechanical engineer

What next?Once you’ve completed this programme you can apply for cross-credits for unit standards from the National Certificate in Motor Industry (Entry Skills) and National Certificate in Mechanical Engineering (Level 2), and become an apprentice working alongside an industry employer and continue studying industry-based unit standards. You can also continue your studies in the Certificate in Applied Technology, specialising in automotive engineering, autotronics, marine engineering systems, or welding and fabrication.

For admission requirements see page 56.

29

Certificate in Applied Technology (Autotronics)

Level 4, 120 creditsDuration Full-time for one year or part-time (day) options availableStarts February or JulyNumber of places 16 placesIndicative fee $5278Campus Mt Albert or Northern


Interested in auto-electronics and auto-electrical applications? The Certificate in Applied Technology (Autotronics) provides you with an in-depth understanding of electronic control systems and componentry in motor vehicle sub-systems. Explore motor vehicle mechanical systems and sub-systems, and electrical and electronic principles. Learn to find faults and diagnose automotive electronic problems, and develop a sound knowledge of engine management, fuel injection, electronics, electronic transmission and ABS controls.

Highlights » Industry demand: there is a shortfall of trained auto-

electronic and auto-electrical technicians in New Zealand, and Unitec is currently the only provider of an autotronics qualification.

» A great preparation for an apprenticeship as an auto electrician. Once you’ve successfully completed this programme you’ll be ready to begin working as an auto electrical or auto electronic apprentice.

» Access to state-of-the-art testing and diagnostic equipment.

» Practical projects: you work in teams as you learn a range of automotive electronic problem-solving techniques.

Courses include » TTEC4841 Electrical and Electronics » TTEC4842 Automotive Engines » TTEC4843 Fuels and Fuel Systems » TTEC4844 Transmissions and Drivelines » TTEC4847 Vehicle Electrical and Electronics » TTEC4848 Vehicle Electronic Controls


Career opportunitiesApprentice auto electrician


Study options Automotive engineering


Certificate in Applied Technology (Automotive Engineering)

Level 4, 120 creditsDuration Full-time for one year or part-time (day) options availableStarts February or JulyNumber of places 16 placesIndicative fee $5278Campus Mt Albert or Northern


Do you want to prepare yourself for a career in the automotive industry? In the Certificate in Applied Technology (Automotive Engineering) you learn to carry out repairs on engines, transmissions, brakes, steering and suspension, and fuel and electronic control systems. Gain an understanding of automotive ignition systems, the function and operation of a vehicle braking system, security, and the identification and repair of transmissions, drivelines and final drives. You also learn to interpret general servicing schedules, and carry out customer and administrative services.

Highlights » A great preparation for your apprenticeship. Once

you’ve successfully completed this programme you’ll be ready to begin working as an apprentice mechanic.

» A solid grounding for your career in the automotive industry.

» Cross-credits towards your apprenticeship. » Emphasis on practical projects. » Access to our automotive facilities, which include

engine management workshops, a rolling road and a modern fleet of vehicles.

Courses include » TTEC4841 Electrical and Electronics » TTEC4842 Automotive Engines » TTEC4843 Fuels and Fuel Systems » TTEC4844 Transmissions and Drivelines » TTEC4845 Vehicle Braking Systems » TTEC4846 Vehicle Steering and Stability


Career opportunitiesApprentice mechanic

What next?Once you’ve completed the Certificate in Applied Technology (Automotive Engineering) you can apply for cross-credits for unit standards from the National Certificate in Motor Industry (Automotive Engineering) and become an apprentice mechanic working alongside an industry employer to complete all remaining unit standards. You can also choose to continue your studies in the Bachelor of Applied Technology, specialising in Automotive Engineering.


31 Study options Welding and fabrication

Certificate in Applied Technology (Welding and Fabrication)

Level 4, 120 creditsDuration Full-time for one yearStarts February or JulyNumber of places 16 placesIndicative fee $5278Campus Mt Albert

www.welding.unitec.ac.nzemail [email protected] 0800 10 95 10

Help overcome the real shortage of welders and fabricators that currently exists in New Zealand’s construction industry. The Certificate in Applied Technology (Welding and Fabrication) helps you identify project requirements from a range of plans and drawings, and to prepare plant and equipment for all types of welding.

Highlights » A good preparation to gain the welding certificate. » A mix of theory and practice: you work on a range

of welding and fabrication projects, safely joining or fusing sheet metals. You also gain the skills to design and cut out material, using a variety of fabrication equipment.

» Access to the latest MIG, TIG and Manual Metal ARC welding equipment.

» Lecturers who have a wealth of welding and fabrication experience and constantly keep up-to-date with changes in technology, materials and regulations.

Courses include » TTEC4131 Engineering, Drawing and Materials » TTEC4132 Oxy-Welding, Brazing and Metal Cutting » TTEC4133 Manual Metal ARC Welding » TTEC4134 Metal Inert Gas Welding » TTEC4135 Tungsten Inert Gas Welding » TTEC4136 Low Hydrogen Metal Welding » TTEC4137 Integrated Welding Projects

For detailed course information visit www.welding.unitec.ac.nz.

Career opportunities » Heavy/light fabrication engineer » Welder

What next?Once you’ve successfully completed this programme, you can undertake two certification tests towards the NZ4711, which is required by the construction industry. (Please note: each NZ4711 welding test will cost $90.)


32 Study options Boatbuilding

Certificate in Applied Technology (Boatbuilding)

Level 4, 120 creditsDuration Full-time for one year or part-time (day) options availableStarts February or JulyIndicative fee $5278Campus Mt Albert

www.marine.unitec.ac.nzemail [email protected] 0800 10 95 10

Want a career as a boatbuilder? The Certificate in Applied Technology (Boatbuilding) provides you with an understanding of the boatbuilding industry, boat construction and composites. Become competent in the use of programs like AutoCAD, and find out how to calculate quantities and source materials for a variety of boatbuilding projects. Develop the ability to select and use a range of boatbuilding equipment, and learn to use related machinery. You also become knowledgeable about health and safety standards, navigation and boat handling for inshore sailing.

Highlights » Endorsed by the NZ Marine Industry Training

Organisation, as leading to the National Certificate in Boatbuilding.

» A good preparation for employment in boatbuilding or related industries.

» Emphasis on practical boatbuilding expertise: learn how to build a small craft. Together with your fellow students you also build a larger craft that incorporates complex construction, organisational details and process configurations.

» Cross-credits towards your apprenticeship. » Highly skilled staff who keep up-to-date with

changes in boatbuilding technology, materials and regulations.

» Access to well-equipped boatbuilding facilities such as a large workshop space, a baking oven for composite boats and boat design software.

Courses include » TTEC3000 Introduction to Health, Safety and

Professional Development » TTEC3721 Introduction to Boatbuilding » TTEC4721 Boat Construction » TTEC4722 AutoCAD and Lofting » TTEC4723 Composites » TTEC4724 Small Craft Building

For detailed course information visit www.marine.unitec.ac.nz.

Career opportunities » Apprentice boatbuilder » Apprentice boat refit and repair technician

What next?Once you’ve completed the Certificate in Applied Technology (Boatbuilding) you can continue your study with the Bachelor of Applied Technology, specialising in marine technology/boat design. You can also apply for cross-credits towards unit standards from the National Certificate in Boatbuilding, and become an apprentice boatbuilder.


33 Study options Building technology


Level 2, 60 creditsDuration Full-time for 17 weeks (three days per week)Starts February, March, July or August Number of places 16 places per intakeIndicative fee $2526Campus Mt Albert or Northern

www.building.unitec.ac.nzemail [email protected] 0800 10 95 10

Develop skills for a career in the building industry. The Certificate in Multiskill Building Construction provides you with the skills to start your building career. Become knowledgeable about the basic principles and practices in carpentry, joinery and furniture making, plumbing, plastering, and painting and decorating.

Highlights » Designed to prepare students who haven’t had

previous training for employment in the building industry.

» An overview of different aspects of the building industry.

» A focus on practical exercises where you can apply what you’ve learnt.

» Small classes. » Plenty of one-on-one time with our industry-

experienced staff. » Can serve as a pathway into further study.

Courses include » BUIT2210 Core Carpentry » BUIT2220 Core Plumbing » BUIT2230 Core Furniture and Joinery » BUIT2240 Core Painting and Plastering

For detailed course information visit www.building.unitec.ac.nz.

Career opportunities » Assistant tradesperson » Assistant merchandiser

What next?Once you’ve successfully completed the Certificate in Multiskill Building Construction, you can apply to move into the Certificate in Applied Technology (Boatbuilding), Certificate in Applied Technology (Carpentry), Certificate in Applied Technology (Furniture and Cabinetmaking) or the Certificate in Applied Technology (Plumbing and Gasfitting).



Certificate in Applied Technology (Carpentry)

Level 4, 120 creditsDuration Full-time for one year. Part-time (day) options available for apprenticesStarts February or JulyIndicative fee $5278Campus Mt Albert or Northern


Want a career as a builder? In the Certificate in Applied Technology (Carpentry) you learn to carry out carpentry tasks within a variety of construction projects on campus. You’ll develop a sound knowledge of the carpentry industry, and learn to identify, select and correctly install the right building materials and fastening systems. Become proficient in the use of hand tools, electrical portable tools and machinery, and learn to interpret building plans and calculate building materials. You also become familiar with health and safety issues in the building industry, and increase your knowledge of building codes and regulations.

Highlights » Emphasis on the fundamental construction skills

required for a wide range of building construction tasks.

» A mix of theory and practice. » Together with your fellow building technology

students you build a three-bedroom, two-bathroom house on campus. The house will be sold to the public once it is completed.

» 2000 hours towards your apprenticeship training. » The Unitec Apprenticeship Training Trust may also be

able to find you an apprenticeship with an employer in the building and furniture and cabinetmaking industries.

Courses include » BUIT4540 Carpentry Preliminaries 1A » BUIT4541 Carpentry Preliminaries 1B » BUIT4542 Carpentry Structures 1A » BUIT4543 Carpentry Structures 1B » BUIT4544 Carpentry Envelopment 1 » BUIT4545 Carpentry Interior 1


Career opportunities » Apprentice carpenter » Assistant tradesperson

What next?To become a fully qualified builder, you need to step up to the Diploma in Applied Technology (Building).



Diploma in Applied Technology (Building)

Level 6, 240 creditsDuration Full-time for 2.5 yearsStarts February or JulyIndicative fee $5451Campus Mt Albert


Increase your understanding of building administration, building envelopment and building structures, as well as health and safety issues in the building industry. The Diploma in Applied Technology (Building) helps you further your knowledge of the building industry and will enable you to complete your apprenticeship training.

Highlights » A key step towards becoming a fully qualified builder. » Practical industry projects: apply what you have

learnt in a major industry project. » Industry-experienced lecturers. » Classes are held once a week, so you can combine

study with an apprenticeship. » The Unitec Apprenticeship Training Trust may be

able to find you an apprenticeship with an employer in the building and furniture and cabinetmaking industries.

Courses include » APPT6112 Technology Project » BUIT5110 Building Preliminary 2 » BUIT5111 Building Structure 2 » BUIT5112 Building Envelopment 2 » BUIT6113 Building Preliminary 3 » BUIT6114 Building Structure 3 » BUIT6115 Building Envelopment 3 » BUIT6116 Building Administration and

Managing Projects


Career opportunities » Construction manager » Project manager » Registered builder » Self-employed builder

What next?Once you’ve successfully completed a minimum of 8000 hours of theory and on-the-job practical experience, you’ll be eligible to graduate as a fully qualified builder. You can also apply for entry into the third year of the Bachelor of Applied Technology, specialising in Building.


36 Study options Electrical and electronics engineering

Certificate in Electrical and Electronic Engineering

Level 3, 120 creditsDuration Full-time for one yearStarts February or JulyIndicative fee $4836Campus Mt Albert, Northern campus

www.electrical.unitec.ac.nzemail [email protected] 0800 10 95 10

Want to become an electrician, or an audio-visual or electronics technician? The Certificate in Electrical and Electronic Engineering is a recommended pre-employment pathway. Gain practical electrical and electronics engineering skills, and develop a sound core knowledge of service and repairs. Learn safe working techniques and become familiar with electrical test equipment. You also discover the importance of interpersonal and self-management skills, effective communication, teamwork, literacy, numeracy and safe working practices.

Highlights » An entry-level programme designed to give you a

range of practical skills and knowledge to kick-start a career in the electrical and electronics engineering industries.

» Endorsed by the electrical and electronics engineering industries. Courses are supported by our liaison committee made up of industry representatives.

» Practical projects using modern machinery and tools.

» Industry-experienced staff who are still active in industry.

» Supported by industry sponsors. » Access to Unitec’s new electrotechnology

laboratories. » Cross-credits towards the Certificate in Applied

Technology.

Courses include » ETEC2010 Professional Development » ETEC2020 Electricity and Magnetism » ETEC2030 Electronics » ETEC2040 Health and Safety » ETEC3010 Construction Engineering » ETEC3020 Electrical Service Technician

For detailed course information visit www.electrical.unitec.ac.nz.

Career opportunities » Apprentice electrician » Apprentice electronic technician

What next?Once you’ve successfully completed the Certificate in Electrical and Electronic Engineering, you can choose to either begin your apprenticeship training, or apply for cross-credits towards the Certificate in Applied Technology specialising in audio-visual, electrical engineering or electronics engineering. You’ll also be eligible to apply for the Bachelor of Applied Technology, specialising in Electrotechnology.



Certificate in Applied Technology (Audio-Visual Technician)

Level 4, 120 creditsDuration Full-time for one year or part-time (day) options availableStarts JulyIndicative fee $5278Campus Mt Albert


Want to work as an audio-visual technician on theatre, stage and screen productions? The Certificate in Applied Technology (Audio-Visual Technician) provides you with the knowledge and skills to find employment in a range of audio-visual industries such as theatre, stage and screen productions, outdoor events and film production. Gain an understanding of theatre systems, electronics technology, audio-visual hardware and signal principles, and digital and computer electronics. You’ll also develop the ability to competently operate a variety of audio-visual equipment, including mixing desks, lights and lighting desks, digital and analogue recording equipment, and video projectors.

Highlights » A great preparation for a career in audio-visual

electronics or equipment repair. » As part of the programme you cover the theory and

practical off-job requirements toward registration as an Electrical Appliance Serviceperson under the Electricity Act.

» Access to excellent electronics resources. » A chance to work on theatre or dance multimedia

production, alongside Unitec’s performing and screen arts students and staff.

Courses include » ETEC3821 Electrical Fundamentals A » ETEC3825 AV Signal Principles » ETEC3826 Computer Concepts » ETEC4824 Analogue Electronics » ETEC4825 Digital Logic » ETEC4826 Advanced Digital Electronics » PASA4831 Theatre Systems and Technology » PASA4832 Screen Technology Project

For detailed course information visit www.electrical.unitec.ac.nz

Career opportunities » Audio-visual media editing technician » Lighting and sound systems technician » Stage development, set-up and operating technician

What next?Once you’ve successfully completed this programme you could continue your studies with the Diploma in Performance Technology.



Certificate in Applied Technology (Electrical Engineering)

Level 4, 120 creditsDuration Full-time for one year or part-time (day) options availableStarts February or JulyIndicative fee $5278Campus Mt Albert, Northern campus


Do you want to start an apprenticeship in electrical engineering? The Certificate in Applied Technology (Electrical Engineering) gives you a basic understanding of everything electrical, including alternating and direct current (AC/DC), electricity supply, three-phase principles and electricity networks. Learn to test circuits and diagnose faults in electrical equipment, and gain the skills required to repair and test electrical appliances and equipment. Pre-wire, fit-off and test domestic electrical installations, and connect, test and operate electric motors and transformers.

Highlights » Covers the theory and practical off-job requirements

for registration as an Electrical Appliance Serviceperson and Electrical Service Technician under the Electricity Act.

» Cross-credits towards the National Certificate in Electrical Engineering (Electrician for Registration) off-job units of your electrical apprenticeship.

» Industry-experienced staff who are happy to share their wealth of knowledge with you.

» Access to the latest electrical equipment.

Courses include » ETEC3821 Electrical Fundamentals A » ETEC4824 Analogue Electronics » ETEC4825 Digital Logic » ETEC4927 Process Control » ETEC4928 Electrical Fundamentals B » ETEC4929 Electrical Machines » ETEC4930 Wiring and Rules » ETEC4931 Electricity Systems


Career opportunities » Apprentice electrician » Appliance technician » Electrical servicing and repair technician » Security system technician

What next?Once you’ve completed the Certificate in Applied Technology (Electrical Engineering) you can apply for cross-credits towards the National Certificate in Electrical Engineering, and start your apprenticeship. You can also continue your studies in the Bachelor of Applied Technology, specialising in Electrotechnology.



Certificate in Applied Technology (Electronics Engineering)

Level 4, 120 creditsDuration Full-time for one year or part-time (day) options availableStarts February or JulyIndicative fee $5278Campus Mt Albert, Northern campus


The Certificate in Applied Technology (Electronics Engineering) helps you develop your understanding of analogue, digital and computer electronics. Learn to design combinational circuits using programmable logic devices, and further your knowledge of analogue and digital circuit theory and their practical applications. Become competent in CAD, PLC and C++ programming, as well as MultiSim circuit simulation software.

Highlights » Emphasis on hands-on learning: you get to hone

your electronics engineering skills using the latest electrical equipment.

» As part of the programme you cover the theory and practical off-job requirements toward registration as an Electrical Appliance Serviceperson under the Electricity Act.

» Cross-credits towards your electronic apprenticeship.

Courses include » ETEC3821 Electrical Fundamentals A » ETEC3826 Computer Concepts » ETEC4823 Signal Transmission Principles » ETEC4824 Analogue Electronics » ETEC4825 Digital Logic » ETEC4826 Advanced Digital Electronics » ETEC4828 CAD and PCB Design » ETEC4829 Programming

For detailed course information visit www.electrical.unitec.ac.nz

Career opportunities » Apprentice electronic technician » Computer systems technician » Electronic servicing and repair technician » Radio and television repairer » Security systems technician » Telecommunications technician

What next?Once you’ve completed this programme you can apply for cross-credits towards unit standards from the National Certificate in Electronic Engineering, and start your apprenticeship. Work alongside an industry employer to complete all remaining unit standards and Electrical Workers Registration Board work experience hours to gain the Electrical Appliance Serviceperson registration. You can also continue your studies with the Bachelor of Applied Technology, specialising in Electrotechnology.


40 Study options Furniture and cabinetmaking

Certificate in Applied Technology (Furniture and Cabinetmaking)


www.furniture.unitec.ac.nzemail [email protected] 0800 10 95 10

Combining theory and practice, the Certificate in Applied Technology (Furniture and Cabinetmaking) provides you with the skills for employment in the furnituremaking, cabinetmaking, marine interiors or joinery industries. Learn the basics of furniture and joinery, and then further your skills with an insight into cabinet construction, timber-framed construction and marine interior cabinetry. Develop applied drawing skills, from hand drawings to Computer Aided Design (CAD).

Highlights » A hands-on, workshop-based introduction to

furniture and cabinetmaking. » A mix of study and work experience: you attend

classes for three days per week and spend the remaining two days a week working in the industry. This gives you the opportunity to apply what you have learnt and make valuable contacts for your career.

» Excellent furnituremaking and joinery facilities, which include fully equipped workshops and an industrial CNC machine. You’re welcome to visit our workshops to see them for yourself and we’ll be happy to provide advice to help you in your decision making.

» Industry recognition: cabinetmakers, boatbuilders and joinery companies often call Unitec to offer apprenticeships, full or part-time employment and work experience to our students.

» Highly trained and experienced craftsman tutors. » The Unitec Apprenticeship Training Trust may be

able to find you an apprenticeship.

Courses include » BUIT3640 Woodwork Essentials 1 » BUIT4641 Woodwork Essentials 2 » BUIT4642 Project 1 » BUIT4643 Project 2

For detailed course information visit www.furniture.unitec.ac.nz.

Career opportunities » Cabinetmaker » Furnituremaker » Joiner » Kitchenmaker » Marine cabinetmaker » Shopfitter » Stairmaker

What next?Once you’ve completed this programme you can apply for cross-credits towards unit standards from the National Certificates in Furniture Making or Joinery, and become an apprentice cabinetmaker, furnituremaker or joiner.


41 Study options Marine engineering systems

Certificate in Applied Technology (Marine Engineering Systems)



Combining theory and practice, the Certificate in Applied Technology (Marine Engineering Systems) helps you become familiar with marine engines and marine electrical and electronic systems. Develop an understanding of marine engines and fuel systems, engine components, ignition systems and tuning, and marine transmission and drive systems. Further your knowledge of marine cooling, marinisation and exhaust systems, and the design, construction and operating principles of trailers and trailer systems.

Highlights » Endorsed by the NZ Marine Industry Training

Organisation, as leading to the National Certificate in Marine Systems.

» A good foundation for a career in marine engineering and electricals, or related trades.

» Focus on hands-on projects: you learn to assess the condition of a marine engine and to dismantle, repair and assemble engines.

» Cross-credits towards your apprenticeship. » Access to well-equipped facilities. » Industry-experienced staff who keep up-to-date

with changes in marine engineering technology, materials and regulations.

Courses include » TTEC4841 Electrical and Electronics » TTEC4842 Automotive Engines » TTEC4843 Fuels and Fuel Systems » TTEC4844 Transmissions and Drivelines » TTEC4851 Marine Engines and Drivelines » TTEC4853 Pleasure Craft Mechanical Systems


Please note: Courses from this programme cannot be cross-credited to the Certificate in Applied Technology (Boatbuilding) or Bachelor of Applied Technology (Specialising in Marine).

Career opportunities » Apprentice diesel engine technician » Apprentice marine inboard/outboard technician » Apprentice power boat engineer » Small engine technician


42 Study options Plumbing and gasfitting

Certificate in Applied Technology (Plumbing and Gasfitting)


www.blumbing.unitec.ac.nzemail [email protected] 0800 10 95 10

Want a career as a plumber or gasfitter? In the Certificate in Applied Technology (Plumbing and Gasfitting) you find out how to integrate plumbing and gasfitting services into a building structure, and identify different sources of water, and types of pipes, fittings and pumps. Become knowledgeable about sanitary appliances, fixtures, hot and cold water supply systems, and basic gas theory. You also further your knowledge of the Building Act regulations, and plumbing and gasfitting codes and standards.

Highlights » A sound foundation for employment in the plumbing

and gasfitting industries. » A mix of theory and practice. » Lecturers who have worked in the plumbing and

gasfitting industries themselves, and keep up-to-date with changes in technology, materials and regulations.

» Access to Unitec’s online e-learning programme. » Under the guidance of experienced tutors, plumbing

and gasfitting and carpentry students work together building relocatable houses on the Unitec campus.

» Cross-credits towards your apprenticeship.

Courses include » BUIT2331 General Customer Service, Ethics and

Pricing » BUIT2332 Generic Skills » BUIT3333 Cold Water » BUIT3334 Heating and Ventilation » BUIT4335 Foul Water 1 » BUIT4336 Gas » BUIT4337 Hot Water » BUIT4338 Roofing and Sheetmetal

For detailed course information visit www.plumbing.unitec.ac.nz.

Career opportunitiesApprentice plumber and gasfitter

What next?Once you’ve completed this programme you can apply for cross-credits towards unit standards from the National Certificates in Plumbing and Gasfitting, and become an apprentice plumber or gasfitter.



Bachelor of Applied Technology (Specialise in Automotive Engineering)

Level 7, 360 creditsDuration Full-time for three years or part-time (day) options availableStarts February or JulyNumber of places 35 places each semesterIndicative fee $5451 per yearCampus Mt Albert


Learn to keep pace with the advances in automotive technology and find out how international trends affect our national decisions about automotive applications. Transport efficiency and sustainability issues, traffic accident analysis and vehicle systems diagnosis are all “hot” areas with good employment prospects. Learn to be innovative and gain the skills to confidently apply your knowledge in a wide range of situations. Develop an understanding of how to run a small business, use lawyers and manage projects. You’ll also improve your communication and problem-solving skills, and increase your confidence in business management.

Highlights » Work experience as part of your study: spend one

day a week in a real workplace to apply the theory you have learnt and get a good “feel” for your chosen career.

» A major industry project in your final year where you can make valuable contacts for your future career in the automotive industry.

» Critical analysis is an important component of your study: compare and contrast existing automotive systems and modify them where applicable.

» Access to multiple well-equipped specialist workshops and laboratories.

» A fleet of modern vehicles is available for project work.

» Industry recognition: Unitec is a member of the Vehicle Service Federation, and the on-the-job work experience you get through our automotive programmes will help you keep your finger on the pulse of innovation.

» The opportunity to become a member of the Institute of Automotive Mechanical Engineers (IAME) while you’re a Unitec student. Once you complete your qualification, you’re also eligible to apply to become an Associate Member of the Society of Automotive Engineers Australasia.

Courses include » TTEC5311 Power Transmission » TTEC5312 Suspension and Controls » TTEC5313 Automotive Electrical and Electronics » TTEC5314 Auxiliary Systems » TTEC6310 Engine Management Systems » TTEC6311 Body Systems » TTEC6313 Alternative Energy Vehicles » TTEC6314 Engine Performance and Controls » APPT6112 Technology Project » APPT7115 Innovative Uses of Technology » APPT7116 Industry Project


Career opportunities » Automotive specialist/technician » Car design and building specialist » High performance (power units) technician » Road traffic accident analyst » Vehicle sales and service manager » Workshop controller

Exit qualificationStudents who complete the first two years of the degree may exit the programme with a Diploma in Applied Technology (Automotive Engineering).



Bachelor of Applied Technology (Specialise in Building)

Level 7, 360 creditsDuration Full-time for three years or part-time (day) options availableStarts February or July Number of places 20 placesIndicative fee $5451 per yearCampus Mt Albert


Gain a sound understanding of today’s building industry, construction methods and building materials. This programme provides you with you the knowledge to help you keep pace with advances in building practices and technology, and to confidently apply your skills in both familiar and unfamiliar situations. Further your ability to plan, implement and monitor a building project. You’ll also explore aspects of sustainable building technology practices and integrate this knowledge within the New Zealand building industry.

Highlights » A major industry project where you can make

valuable contacts for your career. » Lecturers who are members of industry groups such

as the Certified Builders Association of New Zealand, the Registered Master Builders Federation and the Building Officials Institute of New Zealand.

» Supportive environment: our staff work closely with you in a mentoring relationship.

Courses include » APPT5111 Self-employment and Managing Projects » BUIT5110 Building Preliminary 2 » BUIT5111 Building Structure 2 » BUIT5112 Building Envelopment 2 » APPT6112 Technology Project » APPT6113 Sustainable Technologies » APPT6114 Societal Context » APPT6116 Negotiated Study » APPT7115 Innovative Uses of Technology » APPT7116 Industry Project » BUIT6113 Building Preliminary 3 » BUIT6114 Building Structure 3 » BUIT6115 Building Envelopment 3 » BUIT6116 Building Administration and Managing

Projects


Career opportunities » Building manager » Project manager » Property developer

Exit qualificationStudents who complete the first two years of the degree may exit the programme with a Diploma in Applied Technology (Building).



Bachelor of Applied Technology (Specialise in Electrotechnology)

Level 7, 360 creditsDuration Full-time for three years or part-time (day) options availableStarts February or JulyNumber of places 16 placesIndicative fee $5451 per yearCampus Mt Albert

www.electrical.ac.nzemail [email protected] 0800 10 95 10

Learn to keep pace with the ever-changing technology in the field of electrical and electronics engineering. The Bachelor of Applied Technology, specialising in Electrotechnology, helps you discover what it takes to develop, engineer and service electrical and electronics equipment. Learn to use materials, tools and equipment skillfully and safely.

Highlights » A mix of theory and practical work to provide you

with the knowledge to confidently apply your skills in a wide range of situations.

» Industry links: thanks to our strong ties with industry sponsor, Schneider Electric, you get to hone your skills using the latest electronics software, work-bench-simulated circuits, mechatronics/electronic workbenches and Labvolt electronic computer hardware.

» A major industry project in your final year, giving you a chance to make valuable contacts.

Courses include » APPT5111 Self Employment and Managing Projects » APPT5410 Analogue Electronics » APPT5411 Power Electronics » APPT5413 Computer Hardware » APPT6112 Technology Project » APPT6113 Sustainable Technologies » APPT6414 Sensors and Wireless Communications » APPT6415 Digital Electronics and Applications » APPT6417 Embedded System Software » APPT7115 Innovative Uses of Technology » APPT7116 Industry Project


Career opportunities » Computer engineer/technologist » Design draftsperson » Digital systems technologist » Electrical engineer/technologist » Electronics engineer/technologist » Mechatronics engineer/technologist » Project leader » Technical manager

Exit qualificationIf you complete the first two years of the degree, you may exit the programme with a Diploma in Applied Technology (Electrotechnology).


46 Study options Marine technology

Bachelor of Applied Technology (Specialise in Marine)

Level 7, 360 creditsDuration Full-time for three years or part-time (day) options availableStarts February Indicative fee $5451 per yearCampus Mt Albert


Do you want a career in the marine industry? There is a huge demand for graduates from this programme, both in New Zealand and around the world. You’ll become knowledgeable about boat design and prepare yourself for a wide range of roles in the marine industry, in New Zealand or overseas. Become familiar with all aspects of yacht design, gain confidence in the use of Computer Aided Design (CAD), and improve your understanding of operating a business.

Highlights » A chance to decide which part of the marine

industry interests you the most: computer design and drafting, composites and material engineering, systems and machinery, or interior and finishing.

» Course content that incorporates the latest industry developments.

» Staff who are members of industry organisations like the Marine Industry Association and the Royal Institution of Naval Architects.

» Visits from industry representatives who frequently recruit our graduates for their companies.

» A major industry project where you can make valuable contacts for your career.

Courses include » TTEC5210 Marine Construction » TTEC5211 Marine Drafting » TTEC5212 Marine Machinery and Systems » TTEC5213 Marine Interiors » TTEC5214 Small Craft Design 1 » TTEC6113 Sustainable Technologies » TTEC6214 Composites » TTEC6216 Propulsion and Resistance » TTEC6217 Small Craft Design 2 » TTEC6218 Repair and Transportation » TTEC7115 Innovative Uses of Technology » TTEC7116 Industry Project


Career opportunities » Marine designer or draftsperson » Project manager

Exit qualificationIf you complete the first two years of the degree, you may exit the programme with a Diploma in Applied Technology (Marine).


47

National certificatesOverview

National certificates are New Zealand Qualification Authority (NZQA) qualifications, which are nationally recognised and enable you to become fully qualified in your trade.

If you’re working as an apprentice and need to increase your skills to become registered and qualified in your trade, you can study a national certificate on a part-time basis:

» We make it easy for you to combine study with your apprenticeship – you can continue to earn while you learn.

» Complete your theory units by attending night classes at Unitec, one or two nights per week (or block courses three to four times per year).

» Some practical units are achieved in your workplace – you’re assessed while you work.

» If you’ve already completed a Certificate in Applied Technology and are about to start working as an apprentice you can apply for cross-credits towards a national certificate, reducing the number of hours/years needed to complete and become registered in your trade.

» A national certificate qualification can take up to four years (part-time) to complete.

» When you’ve completed all unit standard requirements, you can apply directly to the NZQA to receive your national certificate.

To find out more about national certificates visit www.nzqa.govt.nz.

48 Study options Carpentry

National Certificate in Carpentry

Level 4, 286 creditsDuration Part-time over four semesters (one evening per week)Starts February or JulyIndicative fee $5051Campus Mt Albert


If you’ve been working in the building and construction industry for at least seven years but have no formal carpentry training, you can advance your understanding of building practices and gain a qualification that will take your building career even further. You’ll increase your understanding of the Building Act, Building Code, regulations, NZS3604, Health and Safety Act, building quantities, foundations, subfloor, wall and roof frames, external claddings, internal linings and interior finishing. You’ll also improve your ability to deal with subcontractors.

Highlights » A series of evening classes to help you combine

study with your work. You attend classes one evening per week.

» A combination of practice and theory. » Five evening coaching classes to help you prepare

your portfolio of evidence of achievement. For more information please refer to www.shortcourses.unitec.ac.nz.

» Staff who are members of the Certified Builders Association of New Zealand, the Registered Master Builders Federation, Building Officials Institute of New Zealand and other industry groups.

» A wide range of courses – from suspended concrete floor systems and sound insulation systems to pitch gable and hip roof framing, and the planning of demolition work.

» Access to well-equipped workshops.

Courses includeLevel 3 and level 4 unit standard courses are covered in this programme

For more details visit www.building.unitec.ac.nz.

Career opportunities » Qualified carpenter » Self-employment » Apply to become a registered Licensed

Building Practitioner


49 Study options Drainlaying

National Certificate in Drainlaying

Level 4, 150 creditsDuration Part-time evening classes for 48 weeks; distance learning option availableStarts February (or throughout the year for distance learning option)Number of places openIndicative fee $1557Campus Mt Albert

www.plumbing.unitec.ac.nzemail [email protected] 0800 10 95 10

Are you working in the drainlaying industry, and want to gain industry registration? The National Certificate in Drainlaying gives you a thorough grounding in stormwater intake and outfall structures, sub-soil drainage, retention tanks, surface water collection systems, septic tanks, drains, access chambers, drainage systems maintenance, and trade equipment and power tools.

As all applicants must be employed in the industry it’s essential that you complete an Acknowledgement of Training and Education Responsibility form and have it signed by your employer. Forms are available on www.plumbing.unitec.ac.nz.

Highlights » Unitec is the only tertiary provider in Auckland

offering both theory and practical courses in drainlaying to enable you to become a registered drainlayer.

» Follows the syllabus required by the NZ Plumbers, Gasfitters and Drainlayers Board.

» A mix of theory classes and practical assessment.

» Highly qualified staff, many of whom have owned and operated their own businesses.

» Strong ties with the plumbing, gasfitting and drainlaying industries.

Courses include » Customer Service, Ethics and Consumer Law » Health and Safety » Legislation, Codes and Standards » Plan Reading and Pricing » Practical Training » Practical Assessment » Trade Science and Practice


Theory classes held one night per week, from 5.30pm to 7.30pm for 48 weeks (three semesters). If you want to study by distance learning, you can start any time during the year. You must, however, complete all theory courses within 48 weeks of the relevant start date.

When you’ve completed the drainlaying theory component, you’ll need to complete a five-day practical training course followed by a five-day practical assessment, to enable you to gain your national certificate qualification. These are full-time block courses (8am to 4.30pm), held at Unitec’s Mt Albert campus.

Career opportunities » Certifying drainlayer » Licensed drainlayer


50 Study options Electrical engineering

National Certificate in Electrical Engineering(Electrician) (Levels 2, 3 and 4)

Credits Total 150 off-job credits (Level 2: 44, Level 3: 56, Level 4: 50)Duration Part-timeStarts February or July16 places each levelIndicative fee $5051Campus Mt Albert


If you’re ready to enter into an apprenticeship arrangement with an employer, you can further your understanding of electrical engineering with the National Certificate in Electrical Engineering (Electrician for Registration). You’ll find out more about electric lighting and motors, electrical appliances and electrical instrumentation. Improve your knowledge of switchboards, wiring and electrical cables, and low and high voltage. You’ll start your studies at level 2 and progress to level 3 and 4 during the period of training (which takes approximately three years).

Highlights » Covers the off-the-job requirements for registration

as an electrician under the Electricity Act 1992. » A key step towards registration with the Electrical

Workers Registration Board. » Practical experience: using a range of electrical

equipment, you learn to conduct repairs and further your knowledge of electrical and electronic fault finding.

» Experienced staff with plenty of hands-on industry experience.

» A mix of evening classes (two nights a week) and block courses.

Courses includeLevel 2 to level 4 unit standard courses are covered in this programme

For detailed information go to www.electrical.unitec.ac.nz.

Career opportunities » Electrician » Appliance technician » Electrical engineer » Industrial controller » Power electrical/electronics specialist » Security installer

What next?Once you’ve completed all unit standards assessments (at levels 2, 3 and 4) and the electrical theory and regulation examinations, you’ll be eligible to apply to the Electrical Workers Registration Board to become a registered electrician.


51 Study options Motor industry

National Certificate in Motor Industry (Entry Skills)

Level 2, 80 creditsDuration Full-time for 32 weeks plus 100 hours of work experienceStarts FebruaryIndicative fee $47.00 per credit plus NZQA unit standard and Student Services feesCampus Mt Albert


About to start your apprenticeship in the automotive industry? The National Certificate in Motor Industry (Entry Skills) is an entry-level programme that gives you the fundamental skills for a career in the automotive repair industry. You’ll develop a basic knowledge of motor vehicle technology, engines, transmissions, electricals, safety and workshop engineering.

Highlights » Supportive and structured learning environment. » Experienced lecturers. » Access to Unitec’s automotive facilities, which

include engine management workshops and a modern fleet of vehicles.

» Flexible study options: you attend classes at Unitec three nights per week or one night per week if you are completing all practical components in your workplace.

Courses includeLevel 1 and level 2 unit standard courses are overed in this programme

For more details visit www.automotive.unitec.ac.nz.

Career opportunities » Apprentice automotive mechanic

What next?Once you’ve completed the National Certificate in Motor Industry (Entry Skills) and started an apprenticeship, you can step up to the National Certificate in Motor Industry (Automotive Engineering) or the National Certificate in Motor Industry (Automotive Electrical Engineering). Once all unit standards (both practical and theoretical) are completed, you’ll have finished your apprenticeship in the automotive industry, and be eligible to apply to NZQA for your national certificate qualification.


52 Study options Motor Industry

National Certificate in Motor Industry(Automotive Engineering)

Level 4, 271 creditsDuration Part-time, ongoingStarts throughout the yearApplications accepted throughout the yearIndicative fee $44.00 per unit standard plus NZQA Unit Standard and Student Services feesCampus Mt Albert


Do you want to specialise in automotive engineering? If you’ve already entered into an apprenticeship arrangement with an employer, you can further your knowledge of vehicle engineering with the National Certificate in Motor Industry (Automotive Engineering). If you have successfully completed the Certificate in Automotive and Mechanical Engineering, the National Certificate in Motor Industry (Entry Skills) or the Certificate in Applied Technology (Automotive Engineering), you can progress into this programme, gaining cross-credits towards the national certificate qualification.

Highlights » Study that fits around your apprenticeship: you

study the National Certificate in Motor Industry (Automotive Engineering) on a part-time basis. You attend evening classes at Unitec one or two nights per week while completing all practical components in your workplace.

» Staff who are experts in automotive engineering. » A supportive and structured learning environment. » Access to Unitec’s automotive facilities, which

include an engine management laboratory.

Courses includeUnit standard courses are covered in this programme


Career opportunities » Automotive engineer » Automotive technician » Heavy equipment technician » Powerboat engineer » Small engine technician


53 Study options Motor Industry

National Certificate in Motor Industry(Automotive Electrical Engineering)

Level 4, 244 credits Duration Part-time, ongoingStarts throughout the year Number of places open Indicative fee $47.00 per unit standard plus NZQA unit standard and Student Services feesCampus Mt Albert


Want to specialise in automotive electrical engineering? If you’ve already entered into an apprenticeship arrangement with an employer, you can further your understanding of vehicle electrics with the National Certificate in Motor Industry (Automotive Electrical Engineering). If you have successfully completed the Certificate in Automotive and Mechanical Engineering, the National Certificate in Motor Industry (Entry Skills) or the Certificate in Applied Technology (Automotive Engineering), you can progress into this programme, gaining cross-credits towards the national certificate qualification.

Highlights » A supportive and structured learning environment. » Experienced lecturers who are experts in the

automotive electrical and electronics area » Flexible study options: to make it easy for you

to combine study with your apprenticeship, you study the National Certificate in Motor Industry (Automotive Electrical Engineering) on a part-time basis. You attend evening classes at Unitec one or two nights per week while completing all practical components in your workplace.

Courses includeUnit standard courses are covered in this programme


Career opportunities » Automotive electrical engineer


54 Study options Plumbing and Gasfitting

National Certificates in Plumbing and Gasfitting

Level 4, 219 credits PlumbingLevel 4, 171 credits Gasfitting Duration Three block courses of two weeks per year for three years, two block courses of two weeks for one yearStarts throughout the yearNumber of places 16 places per block courseIndicative fee $1460Campus Mt Albert

www.plumbing.unitec.ac.nzemail [email protected] 0800 10 95 10

About to start your apprenticeship and need to become qualified? Further your understanding of plumbing and gasfitting theory by studying the National Certificates in Plumbing and Gasfitting. Develop a sound knowledge of plumbing and gasfitting systems, pipe work, roofing, meters and heating systems. Because plumbing and gasfitting are licensed trades for health and safety reasons, you’ll also cover sanitation, ventilation and water supply.

Highlights » Once you‘ve completed all assessments and optained

your National Certificate along with your completion of the PGDB board exam, you’ll be eligible to apply to become a licensed plumber and gasfitter.

» Unit standards covering a range of topics: each topic may have a number of assessment checks, designed to demonstrate your competency in a particular skill. The assessment checks for each unit standard are often spread out over several years.

» Much of our teaching material is donated by the industry, and manufacturers like Apex Valves, Aqualine, Marley, Rheem, Rinnai, Methven, Buteline, Aquatherm NZ and many others come in personally to explain their products.

» A series of block courses: attend three two-week block courses each year for the first three years, and two, two-week block courses in the final year. A comprehensive, web-based distance learning programme forms part of the assessment process.

Courses include » Generic Skills » General Customer Services, Ethics and Pricing » Heating and Ventilation » Cold Water » Hot Water » Foul Water » Gas » Roofing and Sheetmetal


Career opportunities » Certifying plumber and gasfitter » Licensed plumber and gasfitter

What next?Once you’ve completed all unit standards assessments and registration examinations, you will be eligible to apply to the PGDB to become a licensed plumber and gasfitter.


Study options Short courses and professional development 55

Short courses and professional development

Want to develop the skills to become registered in your trade? Or just want to learn something new? Our short courses and professional development courses add to your existing knowledge within a short amount of time. Courses can be anything from an intensive one-day workshop to a series of classes over several weeks. To find out more visit www.shortcourses.unitec.ac.nz or call 0800 10 95 10.

Automotive » Automotive Air Conditioning (Installation and

Servicing) » Basic Car Maintenance » Introduction to Multiplexing and CAN Bus » Oscilloscope for Automotive Diagnosis » Vehicle Emission Testing » Vehicle Inspector’s Preparatory Course » Vehicle Wheel Alignment

Carpentry Portfolio Development for Carpenters – The National Certificate in Carpentry, practical units

Electrical & electronics » Electrical Appliance Service person (EAS) » Electrical Appliance Service person endorsed » Electrical Service Technician » EWRB Practical Skills Assessment for Electricians

and Engineers Stage 1 » EWRB Practical Skills Assessment for Electricians

and Engineers Stage 2 » EWRB Practical Skills Assessment for Electricians

and Engineers Stage 3 » Introduction to Electronics » Practising Licence Competency Programme Course » Programmable Logic Controllers (PLC) » Tradesperson Electrical Work Certificate for Plumbers

and Gasfitters

Plumbing, gasfitting & drainlaying » Backflow Basics » Backflow Survey » Backflow Survey Re-certification » Backflow Testers Cross-connection » Backflow Testers Re-certification » Certifying A, B and C Evening Classes » Certifying Refresher Classes » Plumbing, Gasfitting and Drainlaying Registration

Refresher Classes » Tradesperson Electrical Work Certificate for Plumbers

and Gasfitters

A number of plumbing and gasfitting short courses have Continuing Professional Development (CPD) points attached to them. For detailed course information visit www.pgdb.co.nz.

Welding & fabrication » Manual Metal Arc Welding (Introduction) » Manual Metal Arc Welding (Intermediate) » MIG and TIG Welding (Introduction) » MIG Welding (Intermediate) » NZ4711 Certified Arc Welding » NZ4711 Certified MIG Welding

56 General Info Admission requirements

Certificate in Automotive and Mechanical EngineeringTo be eligible for admission, applicants must meet the general, discretionary or special admission requirements. Applicants must also meet the English language requirements and may be interviewed.

GENErAL ADMISSIONApplicants must:Be at least 16 years of age when the programme begins (or provide a completed Early Release Exemption form, which you can obtain from your local Ministry of Education office); AND

Have completed a minimum of three years of secondary school education; AND

Have a grade of C or above in New Zealand School Certificate Mathematics, or equivalent; or

Have the Unitec Certificate in Foundation Studies (Level 2): Whitinga, or equivalent.

It is also recommended that applicants have a minimum of 10 NCEA credits in Mathematics at level 1, or equivalent.

DISCrETIONArY ADMISSION (For applicants aged under 20)Applicants who do not meet the general admission requirements and who are less than 20 years of age when the programme begins may be considered for discretionary admission if they can demonstrate aptitude for study at the required level.

SPECIAL ADMISSION (For applicants aged 20 and over)Applicants who do not meet the general admission requirements and who are at least 20 years of age when the programme begins may be considered for special admission if they can provide evidence of aptitude or appropriate work or other experience.

ENGLISH LANGUAGEApplicants must:Have a minimum of eight NCEA credits at level 1 in English, or equivalent; Or

Admission requirements

Have a grade of D or above in New Zealand School Certificate English, or equivalent; Or

Have an overall IELTS band score (Academic) of at least 5.5 (with no band score lower than 5.0), or a TOEFL score of no less than 525, or equivalent; Or

Have an appropriate Unitec English language qualification, such as the Certificate in Intensive English (Upper Intermediate), or equivalent.

Certificate in Applied Technology To be eligible for admission, applicants must meet the general, discretionary or special admission requirements. Applicants must also meet the English language requirements and may be interviewed.


Have a minimum of four years’ secondary school education; AND

Have at least 12 NCEA credits at level 1 in each of at least two subjects, or equivalent; Or

Have New Zealand School Certificate passes in at least two subjects, or equivalent; Or

Have the Unitec Certificate in Foundation Studies: Whitinga (Level 2), or equivalent.

Applicants must also have a qualification in a subject that matches their proposed endorsement, or experience in the field of study.


57


ENGLISH LANGUAGEApplicants must:Have a minimum of 12 NCEA credits in English at level 1, or equivalent; Or

Have a grade of C or above in New Zealand School Certificate English, or equivalent; Or

Have an overall IELTS band score (Academic) of no less than 5.5 (with no band score lower than 5.0), or a TOEFL score of no less than 525, or equivalent; Or


Certificate in Multiskill Building ConstructionTo be eligible for admission, applicants must meet the general admission requirements and the English language requirements and may be interviewed.

GENErAL ADMISSIONApplicants must be at least 16 years of age when the programme begins (or provide a completed Early Release Exemption form, which you can obtain from your local Ministry of Education office).

ENGLISH LANGUAGEApplicants must:Have attended secondary school, in an English medium, until the minimum leaving age, Or

Have an overall IELTS band score (Academic) of no less than 5.0, or a TOEFL score of no less than 500, or equivalent; Or

Have an appropriate Unitec English language qualification, such as the Certificate in Intensive English (Intermediate), or equivalent.

Diploma in Applied Technology (Building)To be eligible for admission, applicants must meet the general, discretionary or special admission requirements. Applicants must also meet the English language requirements and may be interviewed.


Have an appropriate qualification at level 3 or above, or equivalent; Or

Have a total of 60 NCEA credits in their best four subjects at level 2, or equivalent; Or

Have gained a maximum total of 16 in their best four New Zealand Sixth Form Certificate subjects, or equivalent.

Applicants must also:Have the Unitec Certificate in Applied Technology (Carpentry) (Level 4); Or

Have either the National Certificate in Carpentry (Level 4), or equivalent, or experience in a building-related discipline.

All applicants, except those with the Unitec Certificate of Applied Technology (Carpentry), must demonstrate their practical abilities by providing a small portfolio of work to indicate that they are able to:

» Produce and work to simple work plans » Select and use materials, tools and equipment » Identify and design solutions to problems » Carry out general repairs and/or produce useful

products.

The portfolio may include such items as computer-generated material, photos, models, diagrams, designs, plans, explanations, reports and letters of support. The portfolio must also include an explanation of the items submitted.




ENGLISH LANGUAGEApplicants must:Have a minimum of 12 NCEA credits in English at level 1, or equivalent; Or

Have a minimum of seven NCEA credits at level 3 in an English-rich subject, or equivalent; Or

Have successfully completed studies at level 5 or higher in an English medium; Or

Have a grade of C or better in New Zealand School Certificate English, or equivalent; Or

Have gained New Zealand University Bursaries in an English-rich subject with a minimum mark of 40 percent, or equivalent; Or


Have an appropriate Unitec English language qualification, such as the Certificate in English (Academic), or equivalent.

Certificate in Electrical and Electronic EngineeringTo be eligible for admission, applicants must meet the general, discretionary or special admission requirements and the English language requirements. Applicants may be interviewed.


Have at least three years’ secondary school education (to Year 11); Or

Have the Unitec Certificate in Foundation Studies (Level 2): Whitinga.




ENGLISH LANGUAGEApplicants must:Have a minimum of eight NCEA credits in English at level 1, or equivalent; Or


Have an overall IELTS band score (Academic) of at least 5.5 (with no band score lower than 5.0), or a TOEFL score of no less than 525, or equivalent; Or


59

Bachelor of Applied Technology To be eligible for admission, applicants must meet the general, discretionary or special admission requirements. Applicants must also meet the English language requirements and may be interviewed.

GENErAL ADMISSIONApplicants must:Have a minimum of 42 credits at level 3 or higher on the National Qualifications Framework, including a minimum of:

» 14 credits at level 3 or higher in each of two subjects from an approved subject list; AND

» 14 credits at level 3 or higher taken from no more than two additional domains on the National Qualifications Framework or approved subjects; AND

Have a minimum of 14 credits at level 1 or higher in Mathematics or Pangarau on the National Qualifications Framework; AND

Have a minimum of eight credits at level 2 or higher in English or Te Reo Māori, of which four credits must be in Reading and four in Writing (see note 1), or equivalent; Or

Have at least three C passes in New Zealand University Bursaries examinations, or equivalent; Or

Have the Unitec Certificate in Foundation Studies: Whitinga (Level 3) with a relevant endorsement, where appropriate, or equivalent.

Applicants must also have either the Unitec Certificate in Applied Technology or a national certificate at level 3 or higher in a discipline relevant to the applicant’s specialisation in the degree, or equivalent.

Applicants who have not completed the Unitec Certificate in Applied Technology must submit a portfolio of achievements broadly equivalent to the practical skills required for the certificate.



ENGLISH LANGUAGEApplicants must:Have a minimum of eight NCEA credits in English at level 2, of which four credits must be in Reading and four in Writing, or equivalent; Or

Have at least seven NCEA credits at level 3 in an English-rich subject, or equivalent; Or

Have successfully completed studies at level 5 or higher in an English medium; Or

Have a grade of 5 or better in New Zealand Sixth Form Certificate English, or equivalent; Or

Have New Zealand University Bursaries in an English-rich subject with a minimum mark of 40 percent, or equivalent; Or


Have an appropriate Unitec English language qualification, such as the Diploma in English (Academic), or equivalent.

Applicants who do not meet the English language requirements may still be accepted if they have successfully completed the Unitec Certificate in Applied Technology.

Portfolio requirementsThe portfolio must demonstrate the applicant’s ability to:

» Produce and work to working drawings » Select and use materials, tools and equipment » Identify problems and design solutions to problems » Carry out general repairs and/or produce useful

products.


The portfolio may include such items as computer-generated material, photos, models, diagrams, designs, plans, explanations, reports and letters of support. The portfolio must also include an explanation of the items submitted. (See Note 2.)

Note 1: New Zealand secondary school graduates who have English as

an additional language (EAL) and are using NCEA to meet the general

admission requirements may substitute the eight credits in English at

NCEA level 2 (four in Reading and four in Writing) with an IELTS score

(or equivalent). This IELTS score is the same as that required by the

programme in which they wish to enrol. These students are still required

to achieve a minimum of 42 NCEA credits at level 3 or higher and the

Mathematics or Pangarau requirements.

Note 2: Applicants for the Bachelor of Applied Technology (Specialising in

Electrotechnology) who have gained 42 credits at NCEA level 3, and with

20 of those credits in two of the following subjects, Physics, Mathematics

with Calculus, or Statistics and Modelling, may present their credits as

their portfolio.

National Certificate in CarpentryTo be eligible for admission, applicants must meet the general, discretionary or special admission requirements. Applicants must also meet the English language requirements and may be interviewed.


Be employed in the building construction industry; Or

Be on an education or training programme that leads into the building construction industry.

DISCrETIONArY ADMISSION (For applicants aged under 20)Applicants who do not meet the general admission requirements and who are less than 20 years of age when the programme begins may be considered for discretionary admission:At the request of the Building Construction Industry Training Organisation (BCITO) or Industry Training Association Building (ITaB); Or

If they can demonstrate aptitude for study at the required level.

SPECIAL ADMISSION (For applicants aged 20 and over)Applicants who do not meet the general admission requirements and who are at least 20 years of age when the programme begins may be considered for special admission:At the request of the Building Construction Industry Training Organisation (BCITO) or Industry Training Association Building (ITaB); Or

If they can provide evidence of aptitude or appropriate work or other experience.

ENGLISH LANGUAGEApplicants must:Have a minimum of eight NCEA credits at level 1, or equivalent; Or


Have an overall IELTS band score (Academic) of no less than 5.5 or a TOEFL score of no less than 525; Or


National Certificate in DrainlayingTo be eligible for admission, applicants must meet the general, discretionary or special admission requirements. Applicants must also meet the English language requirements and may be interviewed.

Applicants who are employed in the industry must complete an Acknowledgement of Training and Education Responsibility form and have it signed by their employer. The form is available from our website, www.plumbing.unitec.ac.nz.


61

Be employed in the industry and hold a current limited licence for drainlaying issued by the Plumbers, Gasfitters and Drainlayers Board; AND

Have at least three years’ secondary school education; Or

Have the Unitec Certificate in Foundation Studies: Whitinga (level 2), or equivalent.

Note: Applicants not employed in the industry and not holding a limited

licence may, with the approval of the Programme Committee, enrol in

the programme’s theoretical courses. They will not be eligible to enrol

for the Practical Assessment course, but may be awarded a Certificate of

Proficiency.



ENGLISH LANGUAGEApplicants must:Have a minimum of eight NCEA credits at level 1, or equivalent; Or




National Certificate in Electrical EngineeringTo be eligible for admission, applicants must meet the general, discretionary or special admission requirements. Applicants must also meet the English language requirements and may be interviewed.

Level 2GENErAL ADMISSIONApplicants must:Be at least 16 years of age when the programme begins (or provide a completed Early Release Exemption form, which you can obtain from your local Ministry of Education office); AND

Have completed three years’ secondary school education.




ENGLISH LANGUAGEApplicants must:Have a minimum of six NCEA credits in English at level 1, or equivalent; Or





Level 3GENErAL ADMISSIONApplicants must:Have completed the National Certificate in Electrical Engineering (Level 2); Or

Have completed the Unitec Certificate in Electrical and Electronics, or equivalent.








Level 4GENErAL ADMISSIONApplicants must:Have completed the National Certificate in Electrical Engineering (Level 3); Or

Have completed the Unitec Certificate in Applied Technology (Electrical Engineering), or equivalent.








63

National Certificate in Motor Industry (Entry Skills)To be eligible for admission, applicants must meet the general admission requirements. Applicants must also meet the English language requirements and may be interviewed.

GENErAL ADMISSIONApplicants must be at least 16 years of age when the programme begins (or provide a completed Early Release Exemption form, which you can obtain from your local Ministry of Education office).

ENGLISH LANGUAGEApplicants must:Have attended secondary school, in an English medium, until the minimum leaving age, Or



National Certificate in Motor Industry (Automotive Engineering)/National Certificate in Motor Industry (Automotive Electrical Engineering)To be eligible for admission, applicants must meet the general, discretionary or special admission requirements. Applicants must also meet the English language requirements and may be interviewed.


Be working in the industry; AND

Have completed the National Certificate in Motor Industry (Entry Skills); or equivalent.





Have an overall IELTS band score (Academic) of no less than 5.5 (with no band score lower than 5.0) or a TOEFL score of no less than 525, or equivalent; Or


National Certificates in Plumbing and GasfittingTo be eligible for admission, applicants must meet the general admission requirements and may be interviewed.

GENErAL ADMISSIONApplicants must:

Stage 1Be employed in the plumbing and gasfitting industry.

Have a current limited license for all block course training.


Stage 2Have completed the Certificate in Applied Technology (Plumbing and Gasfitting), or equivalent; Or

Have completed Stage 1 of the National Certificate in Plumbing and National Certificate in Gasfitting, or equivalent; AND

Be employed in the plumbing and gasfitting industry.


Stage 3Have completed Stage 2 of the National Certificate in Plumbing and National Certificate in Gasfitting, or equivalent; AND

Be employed in the plumbing and gasfitting industry.


65

66 General Info Fees and loans

The indicative fee listed on the page for each programme in this brochure was the approximate 2012 annual programme fee (including GST).

Programme fees for 2013 have not yet been set and Unitec is currently reviewing them in the context of the Ministry of Education’s fees maxima policy. As soon as they are approved, 2013 programme fees for these programmes will be available on www.unitec.ac.nz.

The indicative fee acts as a guide only. You will be notified of your exact fee when you have enrolled. Please do not send any payment until you receive your fee invoice.

The programme fee you pay at enrolment covers tuition and class materials. You will also have to pay a Student Services fee, and any applicable NZQA charges. Textbooks for your programme are an additional cost.

The deadline for payment of student tuition fees is seven days before your programme starts. You can pay by cheque, EFTPOS, credit card, or in the form of an approved application for a student loan. (You should apply for your student loan as early as possible to avoid processing delays.) Once you have your student login, you can also pay online, using myRecords.

For information about individual course fees visit www.unitec.ac.nz.

This fee information applies to domestic students only. For details about international student fees, please contact the International Office on +64 9 815 4302 or refer to the International Prospectus.

Administration fees (including GST)In 2012, the administration fees were as shown below. Fees for 2013 have not yet been set and the fees listed here are indicative only.

Academic record (transcript) (for two copies) $20.00Appeal against grade, per course (refunded if grade changed) $99.00Change of course, per change (after 10% of course) $10.00Copy of course descriptors $50.00-$100.00Credit recognition for non-Unitec courses $100.00Recount (refunded if error found) $24.75Resit, per course (where applicable) $35.00Replacement certificates $20.00Student Services fee $280.80

Our withdrawal policyYou may withdraw from a course by giving written notice to Student Central (Te Pae Kōrero). If you withdraw from a course before 10 percent of the course has been completed you are generally entitled to a refund of 90 percent of fees. There is no refund of fees if you withdraw after this time, except in exceptional circumstances. For full details, read the Admission, Enrolment and Fees Policy available on our website at www.enrolmentinfo.unitec.ac.nz.

No record of the enrolment will be entered on your academic record if you withdraw before 10 percent of the course is completed. If you withdraw after 10 percent of the course is completed but before submission or sitting of the final assessment, a grade of W (representing withdrawal from the course) will appear on your academic record.

An application for a refund must be made in writing and on the prescribed form available from Student Central (Te Pae Kōrero).

Fees and loans

67

Find out about student loans and allowancesWe want to make sure that you enjoy student life without too many financial worries. Visit www.unitec.ac.nz for financial tips or to draw up a budget, or contact the Manager Student Funding and Engagement on +64 9 815 4321 ext 7625.

Student loans and allowances support is available to eligible students. For information about student loans and allowances contact StudyLink on freephone 0800 88 99 00 or visit their website www.studylink.govt.nz.

Programme codes are listed at the top of the relevant programme page. You may need these codes if applying for a loan and/or allowance.

Get a scholarship to help with your financesUnitec offers a range of scholarships and awards for students on campus, including Unitec Study Awards, Postgraduate Awards and financial assistance for Māori and Pacific students. To find out more about these, contact the Manager Student Funding and Engagement on +64 9 815 4321 ext 7625.

69

» Alumni programme» Banking facilities» Bookshop» Cafés (including a licensed café)» Career Centre» Chapel» Chaplains» Childcare facilities» Computer labs» Copy Centre» Counselling» Gym» Healthcare facilities including

the Student Health Centre, Osteopathic Clinic and a pharmacy

» IELTS Test Centre » International Office» Libraries (two at Mt Albert, one

at Waitakere and one at the Northern campus)

» Learning commons

» Muslim prayer room» On-campus accommodation» Research Office and Postgraduate

Centre» Shuttle bus service (across the

Mt Albert campus, and between Mt Albert and Waitakere)

» Squash Centre» Student Exchange Programme

(an opportunity to study at Unitec partner institutions in 26 countries around the world)

» Student galleries» Student learning centre» Support centres for Māori and Pacific

students » Support services for students with

learning or physical disabilities» Unitec Theatre» USU Students’ Association » Veterinary Clinic

Everything you need on campus

70

Experience it for yourself

On campus eventsWe hold special events throughout the year where you can meet Unitec staff, graduates and industry representatives and ask all your burning questions.

For the latest updates keep checking www.unitec.ac.nz.

Be a Student for a DayNot sure what to expect from tertiary study? Spend a day alongside Unitec students and take part in actual classes in the programme of your choice.

To find out more call +64 9 815 4321 ext 7879 or email [email protected].

Join a Try it for a Day workshopSometimes it’s difficult to get the flavour of a programme from reading the brochure or website. Try it for a Day is a series of activity-based workshops for senior secondary students.

To find out more call +64 9 815 4321 ext 7879 or email [email protected].

Take a campus tourSee for yourself what our campuses are like! Campus tours run each Friday afternoon from March until the end of November. Bookings are essential.

To find out more call 0800 10 95 10 or email [email protected].

Get some career guidanceNot sure what to study? Visit the Career Centre for free career counselling and advice on course planning. Once you're a student, we can also help you with CVs, cover letters, finding work and interview skills.

To find out more call +64 9 815 2948, email [email protected] or visit www.career.unitec.ac.nz.

DISCLAIMER: Unitec Institute of Technology has used reasonable care to ensure that the information in this publication is accurate at the time of publication. However, to the extent permitted by law, Unitec is not liable for, and makes no warranties or representations as to such accuracy and may change or correct any such information without prior notice. Changes will be available on www.unitec.ac.nz and from Student Central (Te Pae Kōrero).

72

How to apply

Choose the programme you want to study

Need some help deciding? Contact Student Central (Te Pae Kōrero) for advice on programmes, courses and study paths. Phone 0800 10 95 10 Email [email protected].

Offer of place

If your application is successful you will receive an offer of place. This might be conditional on you meeting specific requirements

Need some help applying?We’ve put together answers to the most frequently asked questions about the application process. Check whether we’ve answered your question online at www.faqs.unitec.ac.nz.

Still not sure?Contact Student Central (Te Pae Kōrero): phone 0800 10 95 10, email [email protected], or come in and visit us.

Acknowledgement

We will contact you by post or email to acknowledge that we have received your application form. Check your email spam folder if you haven’t heard from us. If you need to supply more details we will let you know.

Additional admission requirements

Some programmes have additional admission requirements. For example, you may need to complete additional forms, be interviewed, have an audition, or present a portfolio of work. You will be notified of the details if this is applicable.

1

2

3

4

5

6

7

Acceptance

If you are offered a place you normally have 14 days to accept or decline.

Payment

Once you have accepted your place, your fees are payable. For short courses, fees are payable at the time of applying. For all other programmes, fees need to be paid seven days before you start.

You will either be sent an invoice in the post or you can access your invoice online by logging into myUnitec.

Student loans are available to eligible students. Find out more from StudyLink on freephone 0800 88 99 00 or visit www.studylink.govt.nz.

Apply for a place

The fastest and easiest way to apply is online, and we recommend doing it early! You can log in to myUnitec anytime to check your application. www.apply.unitec.ac.nz

No computer access? Phone Student Central (Te Pae Kōrero) on 0800 10 95 10 to order an application pack.

2013 calendar

JUL 1 Mon 1 to Fri 19 – Mid year break

8

15

22 Mon 22 – Semester 2 begins

29AUG

5

12

19

26

SEP 2

9

16 Wed 18 - Graduation

23 Mon 23 to Fri 4 – Mid-Semester break

30

OCT 7

14

21

28 Mon 28 – Labour Day

NOV 4

11

18 Fri 22 – Semester 2 ends

25

DEC 2 Mon 2 – Summer Semester begins

9

16

23 Mon 23 – Summer Semester break begins

30

JAN 7 Summer Semester resumes

14

21

28 Mon 28 – Auckland Anniversary Day

FEB 4 Wed 6 – Waitangi Day Fri 8 – Summer Semester ends

11

18

25 Mon 25 – Semester 1 begins

MAr 4

11

18

25

APr 1

8

15 Mon 15 to Wed 17 - Graduation

22 Mon 22 to Fri 3 May – Mid-Semester break Thur 25 - ANZAC Day

29

MAY 6

13

20

27

JUN 3 Mon 3 – Queen’s Birthday

10

17

24 Fri 28 – Semester 1 ends

phone 0800 10 95 10fax +64 9 815 2905

web www.unitec.ac.nzaddress Private Bag 92025

Victoria St WestAuckland 1142

New Zealand

Mt Albert campus139 Carrington Rd

Mt AlbertAuckland 1025

Northern campus10 Rothwell Ave

AlbanyAuckland 0632

Waitakere campus5-7 Ratanui St

HendersonAuckland 0612

U007

337/

0812

/10,

000

Documents

Kanti Mohwati