Kampmann Spezial Katherm Hk Gb

8/9/2019 Kampmann Spezial Katherm Hk Gb

1/23

Trench Hea

Kathewith EC


2/23

Unbeatable advantages

Controller models

Katherm HK at a glance Details

Choice of grilles Heat and cooling o

Dimensions Benets for you! Calculation progr(ext. Link)

http://m.kampmann.co.uk/mobile/calculation_programs/cat_342/?products_id=33


3/23

Katherm HK:

Individually controlled, demand-led

heating and cooling from the oor.


4/23

Heating and cooling to meet your

personal needsKatherm HK trenches are available as 2-pipe and 4-pipe units. Th

enable simultaneous heating and cooling in the building thanks

parallel supply of hot (LPHW) and cold water (CHW) – for individ

comfort in every single room.


5/23

Optimum performance thanks to

a separating streamA separating stream prevents the air being discharged from the

outlet being drawn back in by the fan (an „air short-circuit“) in

heating and cooling mode. This means that the performance is

signicantly increased in comparison with conventional units.


6/23

High-performance with minimum

energy consumptionThe new EC technology is a revolution in electronic drive techno

It considerably enhances DC motor technology even at low outp

ranges and helps to save costs thanks to its low energy consump


7/23

KaControl as standard

Katherm HK have their own „intelligence“ thanks to factory-tt

KaControl control technology. This means that they can be integ

into KaControl networks or building automation systems, such a

BACnet, Modbus or LON or operate as a Stand-alone control sys


8/23

Free choice of grilles

Katherm HK can be supplied as both roll-up grilles and linear gri

several standard colours/nishes thanks to the individual coordin

of the units to the exact conguration.


9/23

Maximum comfort

The layout and air ow are optimised in order to achieve

a high level of comfort at ground level.


10/23

Katherm H

Frame trim matching the grille

Roll-up grille: aluminium, natural anodise

Anti-twist device for heating connection

Height adjustment feet

Wired ready for connection

High-performance convector

EC fan


11/23

Katherm HK with Supply Air Function (optionally)

Trench length Supply air spigot DN 801) Max. air fow per duct

[mm] [m³ / h]

1250 2 120

2000 3 180

2750 4 240

Cross-section (example showing roll-up grille)

1) Max. air volume per supply air spigot DN 80 = 60 m3 /h.

Other diameters of supply air spigots and air volumes on request.

Katherm HK with Supply Air Function To supply primary air (fresh air) into a spa

This applies only to trench heigt 190 mm. Others on request.


12/23

Peripheral frame pr} Matching the roll-up grille


13/23

Cover plate} As visual protection and protection a


14/23

Anti-twist device for } Prevents damage to the convector w

the connections - optional valves (ac


15/23

Wired ready for con} KaControl


16/23

EC fan} Energy-saving, ultra-efcient

} Innitely variable speed control

} Noise-optimised

} Motor fault indicator on the display


17/23

Add-on set for condtray (optional)} To drain condensation if necessary

}

Assembled or provided as an accesso


18/23

1 2 3

54

76

1

2

3

4

5

6

7

Choice of g(examples shown are

More grille nishes (linear Kampmann-uk.co.uk/grille

Aluminium, natural an

Aluminium, brass ano

Aluminium, bronze an

Aluminium, bronze n

Aluminium, black ano

Aluminium, painted D

Stainless steel


19/23


20/23

1250 2000 2750

Sound pressurelevel dB(A)

Sound powerlevel dB(A)


Sound powerlevel dB(A)


Sound polevel dB(A

HK 340, 2-pipe/4-pipe, height 132 mm 29 37 32 40 34 42



HK 400, 4-pipe, height 132 mm 29 37 32 40 34 42

Heat and cooling outputModel

Unit width [mm] Unit height [mm] Unit length 1) [mm]

1250 2000 2750

Heat output 2), 2-pipe/4-pipe [W]

HK 340

132 2042 / 1287 4085 / 2574 612

150 2189 / 1630 4378 / 3259 656

190 3418 / 2305 5960 / 4020 850

HK 400 132 – / 1645 – / 3289

Cooling output 3), 2-pipe/4-pipe [W]

HK 340

132 385 / 347 769 / 694 115

150 457 / 398 914 / 796 137

190 577 / 631 1006 / 1100 143

HK 400 132 – / 338 – / 677

} Detailed infoKampmann

1) Customised lengths and mitred corners on request2) Heat output QH per Katherm HK, with an average speed setting 60 %, at LPHW 75/65 °C, room air temperature 20 °C3) Cooling output QH per Katherm HK, with an average speed setting 60 %, at LPCW 16/18 °C, room air temperature 27 °C, 50 % relative humidity

http://m.kampmann.co.uk/mobile/calculation_programs/cat_342/?products_id=33


21/23

Plan view, example shown is HK 340, 2-pipe, H =150 mm

Sectional view, example2-pipe, H =150 mm

Dimensions

Front view, connection openings, example shown is HK 340, 2-pipe, H = 150 mm

W i n d o w - s i d e

Katherm HKUnitwidth

HK 340 340

HK 400 400

Three unit lengths are avprogramme for all mode

Window-side

Room-side

Dimensions

Overall unit length

Finned convector length


22/23

Kampmann offers you the following service benets:

} On-site Consultation

} System Solutions

} Diverse Sampling

} Planning Support

} Detailed Discussions

} Site-Measurement

} After Sales Service

Here we are at your service: Kampmann.co.uk/contact

Benets for you!

http://m.kampmann.co.uk/mobile/contact/contact_1.html


23/23

Kampmann GmbH

Friedrich-Ebert-Str. 128 – 130

49811 Lingen (Ems)

Germany

T + 49 591 7108 -0

F + 49 591 7108-300

E [email protected]

Kampmann.co.ukm.kampmann.co.uk

Kampmann UK

Dial House, Gov

Shepperton, Mi

Great Britain

T +44 (0)1932 2

F +44 (0)1932 2

E info@kampm
http://m.kampmann.co.uk/

Documents

Kampmann Spezial Katherm Hk Gb