Difficulty Rating: Beginner

Just KissesDesigned by Elise Lea for RKwww.robertkaufman.com

Featuring

OCEAN LIFE

For questions about this pattern, please email Patterns@RobertKaufman.com.

Finished quilt measures: 52” x 72”

page 2

Fabric and Supplies Needed

Color Fabric Name/SKU Yardage

AASD-18783-248 MARINE

AASD-18781-60 PACIFIC

AASD-18782-60 PACIFIC

AASD-18775-59 OCEAN

AASD-18780-9 NAVY

AASD-18782-59 OCEAN

AASD-18783-246 WATER

AASD-18779-246 WATER

Color Fabric Name/SKU Yardage

Fabric amounts based on yardage that is 42” wide.

A

B

C

D

E

F

G

H

2/3 yard (one full panel)

1-1/2 yard

1-1/2 yard

1/8 yard

1/4 yard

1/8 yard

1/4 yard

1/4 yard

5/8 yard

Copyright 2019, Robert KaufmanFor individual use only - Not for resale

You will also need:3-1/2 yards for backing

- Read through all of the instructions before beginning.- All of the seam allowances are 1/4” unless otherwise noted.- Press seam allowances open unless otherwise noted. - Width of fabric (WOF) is equal to at least 42” wide.- Right sides together has been abbreviated to RST.- Remember to measure twice and cut once!

Notes Before You Begin

AASD-18780-9 NAVY

*Also used for Fabric B

Binding*

page 3

From Fabric A, fussy cut:one 20-1/2” x 40-1/2” center panel

From Fabric B, cut:nine 2-1/2” x WOF strips. Subcut: two 2-1/2” x 24-1/2” top/bottom Border 1 pieces two 2-1/2” x 40-1/2” side Border 1 pieces two 2-1/2” x 30-1/2” top/bottom Border 3 pieces Sew the remaining three strips together, end-to-end, then trim: two 2-1/2” x 46-1/2” side Border 3 piecesfive 1-1/2” x WOF strips. Sew the strips together, end-to-end, then trim: two 1-1/2” x 42-1/2” top/bottom Border 4 pieces two 1-1/2” x 60-1/2” side Border 4 pieces twelve 1-1/2” x WOF strips. Trim to: thirty-six 1-1/2” x 4-1/2” piece 7 units for Log Cabin Blocks A & B thirty-six 1-1/2” x 3-1/2” piece 6 units for Log Cabin Blocks A & B thirty-six 1-1/2” x 2-1/2” piece 3 units for Log Cabin Blocks A & B thirty-six 1-1/2” square piece 2 units for Log Cabin Blocks A & B

From Fabric C, cut:two 5-1/2” x length of fabric strips. Subcut: two 5-1/2” x 62-1/2” side Border 5 piecestwo 1-1/2” x length of fabric strips. Subcut: two 1-1/2” x 44-1/2” side Border 2 piecesFrom the remaining width of fabric, cut:four 5-1/2” x WOF strips. Sew the strips together, end-to-end, then trim: two 5-1/2” x 52-1/2” top/bottom Border 5 piecesseven 1-1/2” x WOF strips. Trim to: two 1-1/2” x 26-1/2” top/bottom Border 2 pieces eighteen 1-1/2” x 5-1/2” piece 9 units for Log Cabin Block A eighteen 1-1/2” x 4-1/2” piece 8 units for Log Cabin Block A

From Fabric D, cut:one 1-1/2” x WOF strip. Trim to: eighteen 1-1/2” square piece 1 units for Log Cabin Block A

From Fabric E, cut:three 1-1/2” x WOF strips. Trim to: eighteen 1-1/2” x 3-1/2” piece 5 units for Log Cabin Block A eighteen 1-1/2” x 2-1/2” piece 4 units for Log Cabin Block A

From Fabric F, cut:one 1-1/2” x WOF strip. Trim to: eighteen 1-1/2” square piece 1 units for Log Cabin Block B

Cutting Instructions

page 4

From Fabric G, cut:three 1-1/2” x WOF strips. Trim to: eighteen 1-1/2” x 3-1/2” piece 5 units for Log Cabin Block B eighteen 1-1/2” x 2-1/2” piece 4 units for Log Cabin Block B

From Fabric H, cut:five 1-1/2” x WOF strips. Trim to: eighteen 1-1/2” x 5-1/2” piece 9 units for Log Cabin Block B eighteen 1-1/2” x 4-1/2” piece 8 units for Log Cabin Block B

From the Binding Fabric, cut:seven 2-1/2” x WOF strips

Step 1: Gather:one each of pieces 1-9 for Block A

Step 2: Sew Piece 1 (the Fabric D square) to the bottom of Piece 2 (the Fabric B square). Press toward the darker fabric.

Step 3: Sew Piece 3 (1-1/2” x 2-1/2” Fabric B) to the right edge of the unit. Press toward the darker fabric.

Step 4: Sew Piece 4 (1-1/2” x 2-1/2” Fabric E) to the bottom edge of the unit. Press toward the darker fabric.

Assemble the Log Cabin A Blocks

1

45

89

2

3

6

7

Step 5: Sew Piece 5 (1-1/2” x 3-1/2” Fabric E) to the left edge of the unit. Press toward the darker fabric.

Step 6: Sew Piece 6 (1-1/2” x 3-1/2” Fabric B) to the top edge of the unit. Press toward the darker fabric.

Step 7: Sew Piece 7 (1-1/2” x 4-1/2” Fabric B) to the right edge of the unit. Press toward the darker fabric.

Step 8: Sew Piece 8 (1-1/2” x 4-1/2” Fabric C) to the bottom edge of the unit. Press toward the darker fabric.

Step 9: Sew Piece 9 (1-1/2” x 5-1/2” Fabric C) to the left edge of the unit. Press toward the darker fabric.

The block should measure 5-1/2” square. Repeat Steps 1-9 to make eighteen A Blocks.

page 5

Step 12: Sew the side Border 1 strips to the sides of the quilt center. Press toward the borders. Sew the top and bottom Border 1 strips to the quilt center. Press toward the borders.

Step 13: Sew the side Border 2 strips to the sides of the quilt center. Press toward the borders. Sew the top and bottom Border 2 strips to the quilt center. Press toward the borders.

Step 14: Sew the side Border 3 strips to the sides of the quilt center. Press toward the borders. Sew the top and bottom Border 3 strips to the quilt center. Press toward the borders.

Assemble the Log Cabin B Blocks

Assemble the Quilt

1

45

89

2

3

6

7

Step 10: Gather:one each of pieces 1-9 for Block B

Step 11: Using the same process described in Steps 1-9, sew each piece together in order to form the B Block, referring to the fabric placement shown in the Block Assembly Diagram.

The block should measure 5-1/2” square. Repeat Steps 10-11 to make eighteen B Blocks.

page 6

This pattern may be used for personal purposes only and may not be reproduced in any form without the express permission from Robert Kaufman Fabrics. This pattern is not for resale. All patterns, unless otherwise attributed, are © Robert Kaufman Co., Inc. 2005-2019. All rights reserved.

Step 15: Gather five A Blocks and five B Blocks. Sew together to form a column, alternating Blocks A and B and noting the fabric placement and block orientation shown in the Quilt Assembly Diagram. Sew to the left edge of the quilt center. Press. Repeat to make a second column and sew to the right edge of the quilt center.

Step 16: Gather four A Blocks and four B Blocks. Sew together to form a row, alternating Blocks A and B and noting the fabric placement and block orientation shown in the Quilt Assembly Diagram. Sew to the top edge of the quilt center. Press. Repeat to make a second row and sew to the bottom edge of the quilt center.

Step 17: Sew the side Border 4 strips to the sides of the quilt center. Press toward the borders. Sew the top and bottom Border 4 strips to the quilt center. Press toward the borders.

Step 18: Sew the side Border 5 strips to the sides of the quilt center. Press toward the borders. Sew the top and bottom Border 5 strips to the quilt center. Press toward the borders.

Your quilt top is complete! Baste, quilt, bind and enjoy!