PanaShot™Steel Shot Abrasive

!:J •nAbraslves

Product Description And Technical Data:PanaShot™ is manufactured by melting high quality steel scrap,

that is subsequently atomised by pouring streams of the moltensteel through high-pressure water jets.

The resultant shots are then homogenised by reheating and thensubsequently refined during quenching.

The shots are then dried and reheated in a tempering furnace toproduce the applicable hardness. The tempered shots are then me-chanically screened to produce 11 grades conforming to SAE stan-dard specifications for blasting shots.

Grades of differing sizes and/or hardnesses specifically for spe-cialised applications, ie shot peening are also produced.

PanaShot™ is produced under a controlled manufacturing proc-ess to achieve a product of uniform hardness, density and micro-structure; coupled with good toughness for durability.

These factors result in abrasive of sufficient hardness to performits cleaning function as well as an extended life.

PanaShot™ is Widely used as a media for descaling steel compo-nents prior to coating. In this application the media is used almostexclusively in centrifugal wheel airless blasting equipment.

The round shape and relative softness of PanaShot™ensures ex-cessive wear is not imparted on the equipment.

PanaShot™ is also widely used in the foundry casting industry toremove sand from castings after removal from the mould.

When used in conjunction with the appropriate equipment, Pana-Shot™ is the ultimate abrasive blast media for steel cleaning orpreparation due to its durability.

SAE Steel Shot Specifications:5creen opening sizes and screen numbers with max. and min. cumulative percentage allowed on corresponding screens

Screen Screen Metric SAEShot Number

No. 5ize (In) 5ize (mm) 5780 5660 5550 5460 5390 5330 5280 5230 5170 5110 5070

7 0.1110 2.80 0%

8 0.0937 2.36 0%

10 0.0787 2.00 ~85% 0% 0%

12 0.0661 1.70 ~97% ~85% s5% 0%

14 0.0555 1.40 ~97% ~85% s5% 0%

16 0.0469 1.18 ~97% ~85% s5% 0%

18 0.0394 1.00 ~96% ~85% s5% 0%

20 0.0331 0.850 ~96% ~85% s10% 0%

25 0.0280 0.710 ~96% ~85% s10%

30 0.0232 0.600 ~96% ~85% 0%

35 0.0197 0.500 ~97% s10%

40 0.0165 0.425 ~85% 0%

45 0.0138 0.355 ~97% S10%

50 0.0117 0.300 ~80%

80 0.0070 0.180 ~90% ~80%

120 0.0049 0.125 ~90%

PanaShot™ Abrasive Properties:

Hardness (HRC)Standard

Peening (Regular)Special (Hard)

40-5045-5255·62

Stock Code

Key xxx - Product SAENumber (e.g. 110 for SAE5110)Y - Blank for Standard SAEGrade

Pfor Peening Grade (45-52 HRC)

L for Peening Grade (55-62 HRC)

D for packing in Drums

www.pan-abrasives.comEmail -pagroup@pan-abrasives.com Pan Abrasives Group

Australia - Ph. 613 9303 3801 - Fax. 613 9308 7933China - Ph. 8621 63178833 - Fax. 86 21 63179231Malaysia· Ph. 603 5637 3822 - Fax. 603 5637 2822Singapore· Ph. 65 68616988 - Fax. 65 6861 0919

~cv q ~q 0 cv ~tJ'ati'Vl CW. 'J1!1. 0.o.'Vl3J"l1n~ 32/6 V1dJ 4 Cl'W'W~lJ-lLf'Jn - b~'WlI?11'lJ~vhmn1:; ~lUl'fl~lJ-JLl"ln 9,mt)lPIU'VlJ-lfil'W 12160

(p Y C) P.Y.C. Team Co., Ltd. 32/6 M:o 4 Samkhok-Sena Rd.,T.TaYkhao,A.samkhok,pathu~thani 12160TEAM Tel: (662) 978-9120, 978-9126,101-1453-5 Fax: (662) 978-8431

Website: www.pycteam.com Email: info@pycteam.com