ISTEGNUTI MATERIJALI I OGRADNI SUSTAVI EXTENDED … · • Fe - za čelik DC 03 (hladno valjani) ili S235RJ (toplo valjani) • Al - za aluminij Pt 99,5% • FeZn - za pocinčani

ISTEGNUTI MATERIJALI

I OGRADNI SUSTAVI

EXTENDED MATERIALS

AND GUARDRAIL SYSTEMS

3 O TIM Topusko d.d. | About TIM Topusko d.d.

4 Podatci o tvrtci | Company facts

5 Istegnuti metal | Expanded metals

16 Ograde | Barriers

23 Podupirači | Supporting columns

25 Rešetkasta gazišta | Lattice treads

28 Čelični stupovi za žičane ograde i vinogradarstvo

Steel columns for wire barriers and vineyards

30 Usluge | Services

TIM Topusko d.d - Tvornica istegnutih metala

d.d. u Topuskom posluje od 1961. godine

pod nazivom TIM –Tvornica istegnutih me-

tala d.o.o. Topusko. Prije Domovinskog rata

zapošljavala je oko 500 djelatnika i bila je

značajan proizvoĎač za područje domaćeg

i inozemnog tržišta. Nakon “Oluje” 1995.

godine ponovo je pokrenuta proizvodnja i

izvršena privatizacija.

TIM Topusko d.d. je sada samostalna tvor-

nica u okviru društva Signal Sistem

koja zapošljava oko 50 zaposlenika. Obnovljen

je cijeli proizvodni program i pokrenuta

proizvodnjaza strano tržište. Tvornica je s

pecijalizirana za “program cesta” tj. za izradu

odbojne i zaštitne ograde, portala.

Osnovni proizvod tvornice je istegnuti metal

tj. mreže od istegnutog metala i to od čelika,

aluminija, bakra i slično. Mreže od istegnu-

tog metala koriste se u izradi ograda široke

potrošnje (za ograĎivanje vrtova, dvorišta,

stambenih objekata, balkona i sl.), kao i za

izradu industrijskih ograda.

U proizvodnom programu nalaze se i gra-

Ďevinski podupirači raznih dimenzija koji su

neophodni u svakoj većoj gradnji. Za indu-

strijska postrojenja proizvode se i rešetkasta

gazišta u traženim dimenzijama i oblicima.

Za ograĎivanje autocesta proizvode se od-

bojne ograde (jednostrane i dvostrane za

zemljane trase i za objekte kao što su mosto-

vi, nadvožnjaci i slično), pješačke i zaštitne

ograde na objektima i montažno-pokretne

ograde za privremeno ograĎivanje.

U ponudi se mogu naći i čelični stupovi za

žičane ograde i stupove za vinogradarstvo.

U prešama se mogu izraditi i razni profili (U,

C, L) u različitim dimenzijama.

O TIM Topusko d.d. | About TIM Topusko

TIM Topusko – Tvornica istegnutih metala d.d. in Topusko has been doing business since 1961 under the name of TIM – Tvornica istegnutih metala d.o.o. Topusko. Prior to the Homeland War, the company employed around 500 workers and was an important manufacturer for the local and foreign market. Following Operation Storm in 1995, production was once again activated and privatization completed. TIM Topusko d.d. is currently an autonomous factory within the framework of the Signal Sistem company employing about 50 workers. The complete production program has been renewed and initiated for the foreign market. The factory has specialized for the “roads program”, i.e. the production of guard and protective rails, portals. The basic product manufactured by the factory is expanded metals, i.e. mesh made from expanded metal such as steel, aluminium, copper and similar metals. Meshes manufactured from expanded metals is used for multi-purpose barriers (garden barriers, yards, residential facilities, balconies and similar), and includes the production of industrial barriers. The manufacturing program includes construction of supporting-columns of various dimensions that are essential for any larger construction project. Lattice treads of various dimensions and shapes are also produced for industrial plants. Deflecting rails for barriers motorways are manufactured (one-sided and double-sided for gullies and for structures such as bridges, overpasses and similar), pedestrian and protective rails on structures and prefabricated mobile barriers for temporary barriers purposes. Our assortment includes steel pylons for wire barriers and columns for vineyards. The presses can manufacture various cross-sections (U, C, L) in various dimensions.

3

Podatci o tvrtci | Company facts

TIM Topusko dioničko društvo za TIM Topusko joint stock company for

proizvodnju i usluge manufacturing and services

Skraćena tvrtka: TIM Topusko d.d. Abbreviated: TIM Topusko d.d.

Sjedište: 44415 Topusko, Školska 35 Headquarters: 44415 Topusko, Školska 35

Trgovački sud u Zagrebu pod brojem: Court of Commerce in Zagreb under

Tt-15/26002-2 Taxpayer’s Tt-15/26002-2

Temeljni kapital društva iznosi 28.540.000,00 kn - Company initial capital amounts to kn

nominalni iznos dionice je 100,00 kuna i podijeljen 28.540.000.00 , nominal share amounts to kn

je na 285.400 redovnih dionica 100,00 and is divided into 285,400 regular shares.

Direktor društva: Tomislav Josipović Company Director: Tomislav Josipović

4

Istegnuti metal | Expanded metals

Istegnuti metal je poluproizvod u Expanded metals are half-products

pločama ili trakama od odreĎenog in plates or tracks made from certain

materijala s otvorima koji su mrežasto materials with openings which are mesh

spojeni bez pletenja ili zavarivanja. connected without entwining or welding.

Najvažnija osobina istegnutog metala The most important characteristic of

je njegova velika krutost uz malu expanded metal is its lightweight rigidity.

težinu. Može se krojiti u razne oblike, It can be entwined in various shapes

a da pri tome ne izgubi na čvrstoći ili while not loosing is rigidity or solidity, an

se raspe što je prednost u odnosu na advantage with respect to other mesh-like

druge mrežaste materijale. Materijal od materials. Mesh can be produced from

kojeg se izraĎuju mreže može biti čelik, such materials such as steel, aluminum,

aluminij, bakar, srebro pa čak i trakasti copper, silver or even PVC tracks. The

PVC. Primjena istegnutog metala je vrlo application of expanded metals is very

široka i koristi se: wide and is used:

• For barriers for gardens, backyards,

residential and industrial facilities,

• For floor treads, stairways, transport

vehicles, construction machinery,

cranes, mining, etc.,

• For protective mesh for machine belts

and other rotating parts,

• For sieves in milling, bakery and food

industry,

• In electrical industries for the

production of protective meshes

in batteries, plates for grounding,

protective covers for heating bodies,

masks on heaters, etc.,

• za izradu ograda za vrtove, dvorišta,

stambene i industrijske objekte

• za izradu gazišta za podove,

stepeništa, kod transportnih vozila,

graĎevinskih strojeva, kranova, u

rudarstvu i sl.

• za zaštitne mreže na pogonskim

remenicama i drugim rotirajućim

dijelovima

• za sita u mlinarskoj, pekarskoj i

prehrambenoj industriji

• u elektro-industriji za izradu

zaštitnih mreža u akumulatorima,

ploča za uzemljenje, zaštita grijaćih

tijela, maski na grijalicama i sl.

5

armaturu na asfaltiranim putevima, reinforcing steel, for walls and roofs,

podovima tvorničkih hala itd. reinforcing steel on asphalt paths,

factory floors, etc.

6

• In the radio and TV industry for

covering speakers and microphones,

• In light industry for the protection

of instruments, various supports,

shelves in cloakrooms, billboards,

garbage bins, towels, etc.,

• For pallets and boxes used for

transporting all kinds of goods,

• In the automobile industry for

automobile grills, tractors and

filters,

• In the construction industry as

• u radio- TV industriji za oblaganje

zvučnika, mikrofona

• u lakoj industriji za zaštitu

instrumenata, razne držače i police

u garderobama, panoe, za košare za

smeće, otirače i sl.

• za palete i kutije za sve vrste

transporta robe

• u automobilskoj industriji za maske

automobila, traktora, za filtere

• u graĎevinarstvu kao armaturne

mreže, za zidove i krovove, za


Osnovne karakteristike za izbor

mreže od istegnutog metala

Osnovne karakteristike mreže od

istegnutog metala su: duža (LD) i kraća

(CD) dijagonala romba, debljina lima(d)

i širina rebra(s), kao i traženi materijal i

format mreže (u ploči ili u traci).

Oznake materijala su:

• Fe - za čelik DC 03 (hladno valjani)

ili S235RJ (toplo valjani)

• Al - za aluminij Pt 99,5%

• FeZn - za pocinčani lim 03 Z

Primjer za narudžbu:

Kataloška oznaka T-91 A

• materijal Fe

• otvor romba 55x140

• debljina lima 3 mm

• širina rebra 4 mm

Pregled dimenzija istegnutog metala:

• 3x6, 5x10, 6x12

• 3x10, 5x10,6x16

• 7x30, 10x42, 10x25

• 20x62, 30x80, 40x125

• 55x140, 80x200, 100x250

• 2x3, 2x4, 4x8, 5x6

• 54x200, 80x200

7

Basic Characteristics for Choosing

Mesh Made from Expanded Metal

The basic characteristics of mesh made

from expanded metal are its shorter (CD)

and longer (LD) lattice diagonal, sheet

thickness (t), and rib width (w), as well

as the sought after material and mesh

format (plate for track).

Material designations are:

• Fe – iron DC 03 (hot rolled) or S235RJ

(hot rolled)

• Al – aluminum Pt 99,5%

• FeZn – galvanized steel 03 Z

Example of an order:

Catalogue label T-91 A

• material Fe

• opening dimension 55x140

• sheeting thickness 3 mm

• lattice width 4 mm

An overview of the dimensions of

expanded metal:

• 3x6, 5x10, 6x12

• 3x10, 5x10,6x16

• 7x30, 10x42, 10x25

• 20x62, 30x80, 40x125

• 55x140, 80x200, 100x250

• 2x3, 2x4, 4x8, 5x6

• 54x200, 80x200



Pregled dimenzija alata za istegnuti metal

List of dimensions of tools for expanded metal

MALI STROJ – širina SMALL MACHINE – width

istegnutog metala do 500 mm of expanded metal up to 500 mm

Rb. Nazivna dimenzija

Item Nominal dimension

1. 0,5 x 1,5

2. 1 x 2

3. 1,25 x 2,5

4. 2,5 x 5

5. 2 x 5

6. 2,2 x 4

7. 2,5 x 6

8. 3 x 6 i 3 x 10

9. 4 x 8

10. 5 x 6 i 5 x 10

11. 6 x 12

SREDNJI STROJ MEDIUM MACHINE



1. 3 x 6 i 3 x 10

2. 4 x 8

3. 5 x 10 i 5 x 20

4. 6 x 12 i 6 x 16

5. 7 x 15 i 7 x 30

6. 8 x 18

7. 10 x 25 i 10 x 42

8. 13 x 25

9. 24 x 62

10. 38 x 71

11. 40 x 50

VELIKI STROJ LARGE MACHINE



1. 15 x 45

2. 20 x 62

3. 30 x 80

4. 40 x 115 i 40 x 125

5. 50 x 140

6. 80 x 200

7. 100 x 250

8


3x6, 5x10, 6x12

Otvor romba Debljina lima-d

CDxLD (mm)

Lattice Sheeting

opening thickness – t

CDxLD (mm)

Najveća širina Najveća dužina

mreže (mm) mreže (mm)

Težina mreže

Kg/m2

Mesh weight

kg/m2

Kataloški broj

Catalogue

number

Lattice Maximum mesh Maximum mesh

thickness width (mm) length (mm)

T-1 3x6 0,5

T-2 3x6 0,5

T-3 3x6 0,5

T-4 3x6 0,5

T-5 3x6 0,8

T-6 3x6 0,8

T-7 3x6 0,8

T-8 5x10 0,5

T-9 5x10 0,5

T-10 5x10 0,5

T-11 5x10 0,8

T-12 5x10 0,8

T-13 5x10 0,8

T-14 5x10 0,8

T-15 5x10 0,8

T-16 6x12 0,5

T-17 6x12 0,5

T-18 6x12 0,5

T-19 6x12 0,8

T-20 6x12 0,8

T-21 6x12 0,8

T-22 6x12 1

T-23 6x12 1

T-24 6x12 1

0,8

1

1,2

1,4

1

1,2

1,4

1

1,2

1,4

1

1,2

1,4

1,2

1,4

1

1,2

1,4

1

1,2

1,4

1,2

1,4

1,8

9

1000

1000

1000

1000

1000

1000

1000

500 - 1000

500 - 1000

500 - 1000

500 - 1000

4026 1,93

3217

2695

2299

3217

2695

2299

- 5362

4477

3839

5362

2,42

2,89

3,39

3,88

4,63

5,42

1,45

1,47

2,03

2,32

2,78

3,25

3,48

500 . 1000 4477

500 - 1000

500 - 1000

500 - 1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

3839

4477

3839 4,06

6435 1,21

5362 1,45

4598 1,69

6435 1,94

5362 2,33

4598 2,71

5362 2,91

4598 3,39

3575 4,36

Debljina rebra


3x10, 5x10, 6x16

6x16 1

6x16 1

1,5

2

1

1,5

2

1,5

2

10

0,5

0,5

0,8

0,8

0,8


CDxLD (mm)

Lattice Sheeting


CDxLD (mm)



Težina mreže

Kg/m2

Mesh weight

kg/m2

Kataloški broj

Catalogue

number

T-25

T-26

T-27

T-28

T-29

T-30

T-31

T-32

T-33

T-34

T-35

T-36

T-37

T-38

T-39

T-40

T-41

T-42

T-43

T-44

T-45

T-46

T-47

T-48



3x10

3x10

3x10

3x10

3x10

3x10

3x10

3x10

5x10

5x10

5x10

5x10

5x10

5x10

5x10

5x10

6x16

6x16

6x16

6x16

6x16

6x16

0,5 1

0,5 1,2

0,5 1,5

0,8 1

0,8 1,2

0,8 1,5

1 1,2

1 1,5

0,5 1

0,5 1,2

0,5 1,5

0,8 1

0,8 1,2

0,8 1,5

1 1,2

1 1,5

0,5 1

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

2888 2,7

2682 2,91

2145 3,64

2888 4,32

2682 4,65

2145 5,82

2682 5,82

2145 7,27

5363 1,45

4469 1,74

3575 2,18

5363 2,33

4469 2,79

3575 3,49

4469 3,49

3575 4,36

6435 1,21

4290 1,82

3218 2,42

6435 1,94

4290 2,91

3218 3,88

4290 3,64

3218 4,85

Debljina rebra

3 1000 3575 6,54

11

Težina mreže

Kg/m2

Mesh weight

kg/m2

2,49

3,32

3,12


7x30, 10x42, 10x25


CDxLD (mm)

Lattice Sheeting


CDxLD (mm)


mreže (mm) mreže (mm) Kataloški broj

Catalogue

number



T-49 7x30 0,8

T-50 7x30 0,8

T-51 7x30 1

T-52 7x30 1

T-53 7x30 1

T-54 10x42 0,8

T-55 10x42 0,8

T-56 10x42 0,8

T-57 10x42 1

T-58 10x42 1

T-59 10x42 1,5

T-60 10x42 1,5

T-61 10x25 1,5

T-62 10x25 1,5

T-63 10x25 1,5

Romb

1,5 1000

2 1000

1,5 1000

2 1000

3 1000

1,2 1000

1,5 1000

2 1000

1,5 1000

2 1000

2 1000

3 1000

2 1000

2,5 1000

5005

3754

5005

3754 4,15

2502 6,23

8938 1,4

7150 1,75

5363 2,33

7150 2,18

5363 2,91

5363 4,36

3575 6,54

5363 4,36

4290 5,45

Debljina rebra


20x62, 30x80, 40x125


CDxLD (mm)

Lattice Sheeting


CDxLD (mm)



Težina mreže

Kg/m2

Mesh weight

kg/m2

Kataloški broj

Catalogue

number

T-64

T-65

T-66

T-67

T-68

T-69

T-70

T-71

T-72

T-73

T-74

T-75

T-76

T-77

T-78

T-79

T-80

T-81

T-82

T-83

T-84

T-85

T-86

T-87

T-84A

T-85A

T-86A

T-87A

T-88

T-89

T-90

T-88A

T-89A

T-90A



20x62

20x62

20x62

20x62

20x62

20x62

20x62

20x62

20x62

20x62

20x62

20x62

20x62

20x62

20x62

20x62

20x62

20x62

20x62

20x62

30x80

30x80

30x80

30x80

30x80

30x80

30x80

30x80

40x125

40x125

40x125

40x125

40x125

40x125

0,8 1

0,8 1,2

1 1,2

1 1,5

1 2

1 2,5

1 3

1,5 2

1,5 2,5

1,5 3

2 3

2 3

2 4

2 5

3,5 5

3,5 6

3,5 7

3 5

3 6

3 7

3,5 6

3,5 7

3,5 8

3,5 10

3 6

3 7

3 8

3 10

3,5 4

3,5 5

3,5 6

3 4

3 5

3 6

12

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

1000

2000

2000

2000

1500

1500

1500

1500

1500

1500

1500

1500

1500

1500

1500

1500

1500

1500

2400

2400

2400

2400

2400

2400

21450 0,58

17875 0,7

17875 0,87

14800 1,09

10725 1,45

8580 1,82

7158 2,18

10725 2,18

8580 2,73

7158 3,27

7158 4,36

7158 4,36

5264 5,93

4290 7,27

4290 12,73

3575 15,27

3065 17,81

4290 10,91

3575 13,09

3065 15,27

5363 10,18

4597 11,88

4022 13,57

3218 16,97

5363 8,73

4597 10,18

4022 11,64

3218 14,54

10725 5,09

8580 6,36

7150 7,34

10725 4,36

8580 5,45

7150 6,54

Debljina rebra


55x140, 80x200, 100x250

3,5 10

3 5

3 6

3 7

3 8

3 10

13


CDxLD (mm)



Težina mreže

Kg/m2

Mesh weight

kg/m2

4,07

5,09

Kataloški broj

Sheeting

thickness – t

(mm)

3,5

3,5

3,5

Catalogue Lattice opening

number CDxLD

T-91 55x140

T-92 55x140

T-93 55x140

T-94 55x140

T-91A 55x140

T-92A 55x140

T-93A 55x140

T-94A 55x140



4 2400 13406

10725 5

6

2400

2400

2400

2400

2400

2400

2400

2400

2400

2400

2400

2400

2400

2400

2400

2400

2400

2400

2400

2400

2400

2400

2400

2400

2400

8938 6,11

7660 7,13

13406 3,49

10725 4,36

8938 5,24

7660 6,11

20109 2,72

16088 3,39

13406 4,07

11491 4,75

20109 2,33

16088 2,9

13406 3,49

11491 4,07

21450 2,54

17875 3,05

15321 3,56

13406 4,07

10725 5,25

21450 2,18

17875 2,62

15321 3,05

13406 3,49

10725 4,3

3,5 7

3

3

3

3

4

5

6

7

4

5

6

7

4

5

6

7

5

6

7

8

T-95 80x200 3,5

T-96 80x200 3,5

T-97 80x200

T-98 80x200

T-95A 80x200

T-96A 80x200

T-97A 80x200

T-98A 80x200

T-99 100x250

T-100 100x250

T-101 100x250

T-102 100x250

T-103 100x250

T-99A 100x250

T-100A 100x250

T-101A 100x250

T-102A 100x250

T-103A 100x250

3,5

3,5

3

3

3

3

3,5

3,5

3,5

3,5

Debljina rebra


2x3, 2x4, 4x8, 5x6

500

500

500

500

500

500

500

500

500-1000

500-1000

500-1000

500-1000

500

500

500

7150

4290

4290

1,5 2,5

14


CDxLD (mm)



Težina mreže

Kg/m2

Mesh weight

kg/m2

0,44

0,73

1,09

Kataloški broj

Catalogue

number

T-01

T-02

T-03

T-04

Lattice

opening

CDxLD

2x3

2x3

2x3

2x3

2x4

2x4

2x4

2x4

4x8

4x8

4x8

4x8

5x6

5x6

5x6

Sheeting

thickness – t

(mm)

0,2

0,2

0,3

0,8

0,2

0,2

0,3

0,8

0,4

0,5

0,8

1

1

1



0,3

0,5

0,5

1

0,3

0,5

0,5

1

1,5

1,2

1,5

1,5

1,5

2

1950 6,4

7150 0,44

4290 0,73

4290 1,09

1950 6,4

2860 2,18

3575 2,18

2860 4,41

2860 5,45

3575 4,36

2681 5,82

2145 10,91

Debljina rebra


Šesterokutni romb: 54x200, 80x200 Six-sided lattice: 54x200, 80x200

5

6

7

8

9

10

6

7

8

9

10

11

12

15

Š-110 80x200

Š-111 80x200

Š-112 80x200

Š-113 80x200

Š-114 80x200

Š-115 80x200

Š-116 80x200


CDxLD (mm)



Težina mreže

Kg/m2

Mesh weight

kg/m2

2,91

3,49

4,07

4,66

5,24

5,82

2,18

2,55

2,91

3,27

3,64

4

4,36

Kataloški broj

Catalogue

number

Š-104

Š-105

Š-106

Š-107

Š-108

Š-109

Sheeting

thickness – t

(mm)

2

2

2

2

2

2

2

2

2

2

2

2

2

Lattice

opening

CDxLD

54x200

54x200

54x200

54x200

54x200

54x200



2000 10725

2000 8938

2000 7660

2000 6702

2000 5958

2000 5363

2000 14300

2000 12256

2000 10725

2000 9533

2000 8580

2000 7799

2000 7150

Debljina rebra

• Odbojne ograde •

• Industrijske ograde •

• Ograde široke potrošnje •

• Montažno-pokretne ograde •

• Ograde mostova i vijadukata •

16

Deflecting barriers

Industrial barriers

Standard barriers

Prefabricated-mobile barriers

Bridge and viaduct guardrails

Ograde | Barriers

Ograde Barriers

TIM Topusko d.d. proizvodi TIM Topusko manufactures

sljedeće tipove ograda : following types of barriers:

slijedeće tipove ograda: following types of barriers:

Ograde | Barriers

Industrijske ograde tip “Estetik” Industrial Barriers Type “Estetik”

Ograde od istegnutog metala Barriers made from expanded metal

predstavljaju vrlo pogodno i trajno represents a very suitable and permanent

rješenje za zaštitu industrijskih i drugih solution for the protection of industrial

prostora. and other facilities.

Dimenzije su standardne, a na zahtjev The dimension are standard, but upon

kupca izraĎujemo i druge dimenzije. request by the customer we can also

produce other dimensions.

Uz ogradu se izraĎuju i dvokrilna kolna Along with the barrier, we manufacture

vrata, kao i jednokrilna pješačka vrata. double gates and single pedestrian doors.

Ograda se isporučuje zaštićena The barrier is delivered protected

temeljnom bojom ili toplo pocinčana. using coloring, and can as required be

galvanized or colored with a final coat or

hot dip galvanized.

Proizvod Mreža od isteg. metala Visina(mm) Širina(mm)

Height (mm) Width (mm)

1960 2800

1960 1000

1960 5000

Product

Ograda / Barrier

Pješačka vrata / Pedestrian door

Kolna vrata / Gate

Mesh made from

expanded metal

80x200x4x5

80x200x4x5

80x200x4x5

17

Ograde | Barriers

Odbojne ograde Deflecting Barriers

U modernom cestovnom prometu In modern road transport along with

uz razvoj cestogradnje velika pažnja the road construction development,

poklanja se onom dijelu koji se odnosi great attention is given to those sections

na opremu ceste. Značajan element relating to road equipment. A significant

te opreme čine ČELIČNE ZAŠTITNE component of this equipment comprises

OGRADE uz ceste, koje svojom PROTECTIVE STEEL BARRIERS along roads,

funkcijom omogućuju sigurnost u which functionally contribute to road

prometu. Zaštitne ograde sprječavaju safety. The protective barriers prevent

iskliznuće vozila s pravca, tj. skrenuta the vehicle deviating and maintaining its

vozila prihvaća, zadržava i postepeno course, seldom even stopping the vehicle.

zaustavlja. Materijalne štete na vozilima Damage to vehicles is reduced as is the

su manje, a smanjuje se i broj nesreća number of injuries of those in traffic.

18

We are able to recommend from

production line standard protective

barriers of the following sorts:

• One-sided distance barrier (JDO)

along the route with poles at

intervals of 2-4 meters,

• One-sided distance barrier (JDOO)

on facilities with poles at intervals of

1.33 or 2 meters,

• Two-sided barrier (DDO) on routes

with poles at intervals of 2 or 4

meters,

• Double-sided distance barrier

(DDOO) on facilities with poles at

intervals of 1.33 or 4 meters,

• One-sided barrier (JO) along routes

with poles at intervals of 2 or 4

meters,

• Double-sided barrier (DO) along

routes with poles at intervals of 2 or

4 meters.

ljudi - sudionika u prometu.

Iz našeg proizvodnog programa

možemo vam preporučiti standardne

zaštitne ograde i to slijedeće tipove:

• JDO - Jednostrana distantna ograda

na trasi s razmakom stupova 2 ili 4

metra

• JDOO - Jednostrana distantna

ograda na objektu s razmakom

stupova 1,33 ili 2 metra

• DDO - Dvostrana distantna ograda

na trasi s razmakom stupova 2 ili 4

metra

• DDOO - Dvostrana distantna

ograda na objektu s razmakom

stupova 1,33 ili 4 metra

• JO - Jednostrana ograda na trasi s

razmakom stupova 2 ili 4 metra

• DO - Dvostrana ograda na trasi s

razmakom stupova 2 ili 4 metra

Ograde | Barriers

Osim osnovnih elemenata, stupa i Besides the basic components, pole and

plašta, distantne ograde imaju i odstojni sheeting, the distance barriers possess

element - odstojnik i kapu kao vezu spacer components – spacer and covering

stupa i odstojnika. connecting the pole and spacer.

Ograde za objekte montiraju se pomoću The barriers for facilities is assembled with

sidrenih ploča na koje se vijcima vežu the aid of anchoring plates where poles

stupovi. are fixed using bolts. Protective barriers

Zaštitne ograde uključuju i ukopane include dug in terminal endings at 4, 8 or

završetke na 4, 8 ili 12 metara. 12 meters.

Za sve ostale informacije u svezi For all other information relating to

montaže, zamjene ili održavanja installation, replacement or maintenance

zaštitnih ograda na cestama slobodno of protective barriers on roads feel free to

nas kontaktirajte. contact us.

19

Ograde široke potrošnje tip

“Estetik”

Za ograĎivanje stambenih i

gospodarskih objekata, dvorišta,

balkona, vrtova, cvjetnjaka i sl.

proizvodimo vrlo funkcionalne i estetski

dopadljive ograde od istegnutog

metala.

Osnovni elementi ove ograde su:

• polje i stup

• pješačka vrata sa stupom i bravom

• kolna vrata sa stupom

Ograde su izraĎene od istegnutog

metala zavarenog u okvir od cijevi ili

profila.

Detaljni podatci u tablici

850 2500

850 2500

1050 2500

1050 2500

1200 1000

1200 1000

1400 1000

1400 1000

1200 3000

1200 3000

1200 4000

1200 4000

1400 3000

1400 3000

1400 4000

1400 4000

80x200x3x4

55x140x3x4

80x200x3x4

55x140x3x4

80x200x3x4

55x140x3x4

80x200x3x4

55x140x3x4

80x200x3x4

55x140x3x4

80x200x3x4

55x140x3x4

80x200x3x4

55x140x3x4

80x200x3x4

55x140x3x4

20

Ograda široke potrošnje

tip ESTETIK

Standard barriers

type ESTETIK

Pješačka vrata ESTETIK

Pedestrian door ESTETIK

Velika (kolna) vrata široke

potrošnje ESTETIK

Large (gate)

standard doors (ESTETIK)

Ograde | Barriers

Standard Barriers “Estetik”

We manufacture very functional and

esthetically attractive barriers made from

expanded metals for barriers residential

and business premises, backyards,

balconies, gardens, flowerbeds, etc.

The basic components for such barriers

are:

• field and pole,

• pedestrian door with pole and lock,

• gates with pole.

Barriers are made from expanded metal

welded into a pipe or profile frame. Details

in the table:

Proizvod Istegnuti metal Visina (mm) Širina (mm)

Product Expanded Metals Height (mm) Width (mm)

Ograda široke potrošnje tip ESTETIK Standard barriers type ESTETIK

Pješačka vrata Pedestrian door

Velika (kolna) vrata Large (gate) door

21

Ograde | Barriers

Primjer za narudžbu: / Order example:

80x200x3x4-1050x2500

80x200x3x4-1400x1000

80x200x3x4-1400x4000

U našem proizvodnom programu

imamo i montažno-pokretne ograde

koje su prikladne za privremeno

ograĎivanje objekata, stadiona,

igrališta, parkirališta, izradu prolaza i

slične namjene. Ograde se isporučuju u

pocinčanoj izvedbi i vrlo su trajne.

Montažno - pokretne ograde

Dimenzije: 1100 x 2500

151 116 116

520

Ograde | Barriers

Montažno-pokretne ograde Prefabricated-Mobile Barriers

Our production program offers

prefabricated-mobile barriers suitable for

temporary barriers of premises, stadiums,

playing fields, parking lots, pathways and

similar uses. The barriers are delivered

galvanized and is very durable.

Prefabricated - mobile barriers

Dimensions: 1100 x 2500

2500

2150 225

22

The supporter can be fixed to the base,

and can carry secondary structures used

in construction.

Materials:

The basic piping material used for

making supporters is steel quality S235

JR

Type of supporting columns:

Besides the standard types, on the

customer’s request we manufacture

slanted supporting columns, and

supporting columns of various lengths.

Manner of delivery:

supporting columns are delivered

colored, galvanized or rawo

23

podupirači se mogu učvrstiti za

podlogu, na njih se može osloniti

sekundarna konstrukcija potrebna pri

izgradnji

Materijal:

Osnovni materijal cijevi za izradu

podupirača je čelik kvalitete S235 JR

Vrsta podupirača:

osim standardnih vrsta, na osnovu

zahtjeva kupca proizvodimo i kose

podupirače, te podupirače različitih

duljina

Način isporuke:

podupirači se isporučuju temeljno

obojeni, pocinčani ili u crno

Supporting columns are independent

poles used in building and can bear

large compressive forces. Here are some

of the characteristics of supporters:

Assembly and disassembly:

• Supporters are easily assembled

and disassembled,

• Comprise of upper and lower

sections, washers and locks,

• Upper and lower sections are made

from piping with welded bases,

• Upper section is a smaller diameter

and is inserted into the lower

section,

• Manual setting of support height is

performed using holes in the upper

section with intervals of 100mm

and a lock, and then the washer is

used for finer adjustments,

Podupirač je samostalni stup koji se

primjenjuje u graĎevinarstvu, a može

preuzeti velike tlačne sile.

Evo nekih karakteristika naših

podupirača:

Montaža i demontaža:

• podupirač se lako montira i

demontira

• sastoji se od gornjeg i donjeg dijela,

matice prstena i osigurača

• donji i gornji dio izraĎen je od cijevi

sa zavarenim stopama

• gornji dio je manjeg profila i uvlači

se u donji

• grubo podešavanje visine

podupirača omogućeno je pomoću

rupa na gornjem dijelu s razmacima

od 100 mm i osigurača, a zatim se

maticom izvodi fino podešavanje

Podupirači | Supporting columns

N1 0,5 0,8 N2 0,7 1,2 N3 1,0 1,7

N4 * 1,6 2,9 N5 1,9 3,4 N6 2,5 4,4

*preporučamo, najbrža isporuka * recommend quickest delivery

1195

795

745

545

1695

1045

0,5/0,8 0,7/1,2 1,0/1,7 1,6/2,9 1,9/3,4 2,5/4,4

G = 5,0 kg G = 6,0 kg G = 7,5 kg G = 10 kg G = 12 kg G = 15 kg

24

PodupiraËi | Supporting columns

Pregled standardnih veličina: Overview of standard dimensions:

Tip Minimalna visina (m) Maksimalna visina (m) Težina (Kg)

Type Minimum height (m) Maximum height (m) Weight (kg)

5 6

7,5 10 12 15

4395

3395

2995

2545

1945

1645

Rešetkasta gazišta | Lattice treads

Rešetkasta gazišta izraĎuju se prema Lattice treads (grills) are constructed

projektu naručioca u različitim according to the clients designs in various

formatima i oblicima. shapes and manner.

Rešetkasta gazišta imaju široku primjenu Lattice treads have a wide usage in

u kotlogradnji, rudarstvu, brodogradnji, boiler production, mining, shipbuilding

skladištima, u industriji kao kranske industry, warehousing, industries such as

staze, stepeništa, ophodne staze u crane paths, stairways, and pathways in

postrojenjima. facilities.

Neke od karakteristika naših rešetkastih Some of the characteristics of our lattice

gazišta su: treads are:

• dimenzije do 2000x1500 mm (AxB), • dimensions: 2000x1500mm (AxB)

• kvaliteta materijala – S235 JRG2, • quality of materials – S235 JRG2

• površinski su zaštićena temeljnom • protected surfaces using dyes or hot-

bojom ili su vruće pocinčana, dip galvanized, depending on the

ovisno o zahtjevu kupca. customer’s demands

Uz gazišta isporučujemo i vezne Along with the tread we recommend

•

•

•

•

25

BARBEQUE

COMB

FLOOR STANDARDS

REST PLATFORMS OF EXPANDED

MATERIAL

connecting components offered in two

versions: connecting two grills and

connecting grills with structures.

Overview of types of grills:

elemente i to u dvije izvedbe:

• za meĎusobni spoj dviju rešetki

• za spoj rešetke s konstrukcijom.

Pregled tipova gazišta:

• ROŠTILJ

• ČEŠALJ

• BRODSKI STANDARDI

• GAZIŠTA OD ISTEGNUTOG METALA


Pregled tipova gazišta - ROŠTILJ Overview of Grill Types (BARBEQUE)

25x2

30x3

25,50 26,80

21,26 22,30

30x2 30x2 30x4

40x3 40x3 40x4 67,30 70,70

25x3 25x3 25x4 32,22 33,80

30x3 30x4 38,66 40,60

26

Korak

lamele

axb

Step

lamella

Okvirna

lamela

H1xS3

Frame

lamella

H1xS3

Dopuštena

nosivost kN/m2

AxB 1000x1000

Permitted load

bearing kN/m2

AxB 1000x1000

10,50

11,10

16,10

22,20

Oznaka za Visina

narudžbu rešetke

Nosiva

H1xS1

Load

bearing

Poprečna

H2xS2

Perpendicular

H2xS2

Težina (Kg) Težina (Kg)

Obojeno Pocinčano

Weight (kg) Weight (kg)

dyed galvanized

Grill

height

20

25

30

30

35

40

30

25

30

Order code

G-1-R

G-2-R

G-3-R

G-4-R

G-5-R

G-6-R

G-7-R

G-8-R

G-9-R

axb H1xS1

30x30 20x2

30x30 25x2

30x30 30x2

30x30 30x3

30x30 35x3

30x30 40x3

30x90 30x2

30x90 25x2

30x90 30x3

30x90 25x3

20x2 20x4 22,70 23,80

20x2 25x4

20x2 30x4

15x3 30x4

15x3 35x4

15x3 40x4

15x2 30x4

20x2 25x4

15x3 30x4

20x3 25x4

25,90 27,90

29,10 30,60

40,00 42,00

44,50 46,70

48,90 51,40

25,00 27,00

22,00 23,60

29,00 31,00

26,40 27,70

Pregled tipova gazišta - ČEŠALJ Overview of Grill Type - COMB

Oznaka za Visina Korak Nosiva Poprečna Okvirna lamela

narudžbu rešetke lamele axb H1xS1 H2xS2 H1xS3

25x2 25x4

G-10-R 25

Težina (Kg) Težina (Kg)

Nezaštićeno Pocinčano

Perpendicular Frame lamella Weight (kg) Weight (kg)

H2xS2 H1xS3 unprotected galvanized

G-1-Č 20

G-2-Č 25

G-3-Č 30

G-4-Č 30

G-5-Č 35

G-6-Č 40

G-7-Č 25

G-8-Č 30

G-9-Č 25

G-10-Č 30

20x2 20x2 20x4 21,60 22,70

25x2 25x2 25x4 27,00 28,40

30x2 30x2 30x4

30x3 30x3 30x4

35x3 35x3 35x4

32,40 34,00

50,50 53,00

58,90 61,90

Load

Order code Grill height bearing

H1xS1

Step

lamella axb

30x30

30x30

30x30

30x30

30x30

30x30

30x60

30x60

30x60

30x60

Pregled tipova gazišta

GAZIŠTA OD ISTEGNUTOG METALA

Dimenzija gazišta Dopuštena nosivost

Rest platforms Allowed bearing

dimensions capacity

A x B u mm kN/m2

800 x 300 26,20

800 x 1000 11,20

1000 x 1000 7,00

1000 x 1200 6,70

1000 x 1400 7,20

1200 x 1000 4,30

1400 x 1000 3,50

1500 x 1000 3,20

27

Okvirna lamela Težina (Kg)

H1xS3 Nezaštićeno

Frame lamella Weight (kg)

H1xS3 unprotected

30x4 28,67

30x4 27,13

50x5 65,01

40x4 53,24

Order code Grill height

SB60614 30

SB11003 30

SB 50800 50

SB 50799 40

30x3 ČBRo8

30x3 ČBRo8

50x5 ČBRo10

40x4 ČBRo10


Pregled tipova gazišta - BRODSKI STANDARDI Overview of Grill – FlOOR STANDARDS

Poprečna

Perpendicular

Oznaka za Visina Korak lamele Nosiva

narudžbu rešetke axb H1xS1

37x74

37x100

37x100

37x100

Step lamella Load bearing

axb H1xS1

Čelični stupovi za žičane ograde i vinogradarstvo


Stupovi za žičanu ogradu imaju vrlo Columns for wire barriers have a side

široku primjenu. Primjenjuju se za usage. They are used for motorway

ograde autocesta, cesta, dvorišta, a barriers, roads, backyards, and are

posebno su pogodni u poljoprivredi kod especially suitable for agricultural uses for

planažnih nasada. plantations.

Stupovi su izraĎeni od čelika The columns are made from steel S235JR

S235JR i površinski zaštićeni vrućim and have surfaces protected using

pocinčavanjem. Male su težine, a žičana galvanization. They are lightweight, while

ograda lako se montira (metalna pera). the wire barriers is easily assembled (metal

pinion).

Pregled dimenzija stupova: Overview of column dimensions:

6,60

7,20

7,80

8,40

9,60

1400 2,50

1600 2,50

1800 2,50

2000 2,50

2400 2,50

28

Korisna debljina L1+L2(mm) Debljina lima (mm) Masa kg/kom.

Usable lenght L1+L2 (mm) Sheetin thickness (mm) Weight kg/item.

L (mm)

L (mm)

2200

2400

2600

2800

3200

Pregled dimenzija stupova za Overview of wire barriers column

žičanu ogradu dimensions:

L (mm)

L (mm)

1500

1750

2000

2250

2500

3000

Korisna duljina L1+L2 (mm) Debljina lima (mm) Masa Kg/kom.

Usable length L1 + L2 (mm) Sheeting thickness (mm) Weight kg/item

1000 2,50 4,50

1250 2,50 5,25

1500 2,50 6,00

1750 2,50 6,75

2000 2,50 7,50

2500 2,50 9,00

• statička otpornost na udarce

• 10 puta manja težina od betonskih

stupova

• velika trajnost (površinska zaštita-

cink)

• lako se ugraĎuju i jednostavni su za

manipulaciju

• pogodni su za strojnu berbu

• proizvode se u dimenzijama od

1500 do 3000 mm

45

10 25 10

2,0

• Static resistance to shocks,

• Ten times less weight than concrete

columns,

• Durable (zinc protected surfaces),

• Easily installed and simple to use,

• Suitable for machine harvest,

• Manufactured in dimensions from

1500mm to 3000mm.

60

15 30 15

2,5

Čelični stupovi za žičane ograde i vinogradarstvo


Čelični stupovi za vinogradarstvo i The steel columns for vineyards and fruit

voćarstvo izraĎeni su sa većim brojem growing are made from a larger number

pera na razmaku 100 mm. Neke od of pinions at 100mm intervals. Some of

prednosti ovih stupova su: the advantages of these columns are:

29

Usluge | Services

Hladno oblikovani profili Cold Rolled Profiles

Na našim prešama možemo oblikovati Our pressures can shape profile of various

profile raznih dimenzija i oblika (“C” dimensions and shapes (“C” profile, “U”

profil, “U” profil, “L” profil itd.) dužine profile, “L” profile, etc.) up to 3 meters in

do 6 metara. length.

Za odreĎene dimenzije pošaljite nam For a specific dimension, send us a request.

30

Miscellaneous

• Our pressing machines from 25

to 400 tones can produce various

products from steel using cold rolled.

In particular circumstances we can

use your tools.

• We offer the service of leveling and

cutting steel, aluminum and copper

tracks, etc. up to widths of 1000mm.

• We are assembling all products

comprised in the catalogue.

• Fabrication of metal structures

• Plasma cutting services

TIM Topusko can ensure that all

products manufactured by the company

shall be plastified, painted or galvanized.

All products shall be accompanied by all

required test certificates.

For more information on our services

contact us.

upit.

Ostalo

• Na našim prešama od 25 do 400

tona možemo izraĎivati razne

proizvode od čelika procesom

hladnog oblikovanja. U posebnim

slučajevima možemo koristiti i vaš

alat.

• Obavljamo usluge ravnanja i

krojenja čeličnih, aluminijskih,

bakrenih traka i sl. do širine

1000mm.

• Obavljamo montažu svih proizvoda

iz kataloga.

• Izrada metalnih konstrukcija

• Usluge rezanja na plazmi

TIM Topusko d.d. može osigurati da

svi proizvodi koje proizvodi budu

plastificirani, ličeni ili pocinčani.

Za sve proizvode imamo sve zahtjevane

ateste.

Za ostale usluge kontaktirajte nas za

dogovor.

Kontakti | Contacts

TIM Topusko d.d. TIM Topusko d.d.

44415 Topusko, Školska 35 44415 Topusko, Školska 35

E-mail: E-mail:

[email protected] [email protected]

Tel: +385 44 520 500 Tel: +385 44 520 500

Fax: +385 44 520 503 Fax: +385 44 520 503

TIM Topusko d.d. • godina 2019

www.tim-topusko.com

Documents

ISTEGNUTI MATERIJALI I OGRADNI SUSTAVI EXTENDED … · • Fe - za čelik DC 03 (hladno valjani) ili S235RJ (toplo valjani) • Al - za aluminij Pt 99,5% • FeZn - za pocinčani