Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
ISOLIVING
ISOLIVING
® is a radiant insulation for
use in the air spaces of internal and
external walls. It consists of two layers
of bubble polyethylene and two layers
of low- emissivity aluminium film,
continuosly thermowelded. The
materials used for ® are
absolutely safe, non-toxic and
harmless.
R=1,57 m² K/WRw=61 dBR=1,57 m² K/WRw=61 dB
technical dataIsoLiving®
SYMBOLS VALUE SPECIFICATION NOTE
Thickness s mm 8
Weight P g/m²
Reaction to fire Rf Euroclass Istituto Giordano UNI 9177:10/87 -
Reaction to fire Rf classe
Emissivity - 0,06 ZAE BAYERN DIN EN 12898 -
Thermal resistance R m²K/W 1,57±0,02 Istituto Giordano UNI EN 12667:2002
R m²K/W 1,55 NPL BS EN ISO 8990: 1996
M - > 300.000 CSIT= 23°CUR 50%
- kPaUniversity of Perugia
Faculty of EngineeringUNI EN ISO 3386-1: 2000
Resistance to
tensile stress- N UNI EN ISO 527-1:1997
INSTITUTION
OF CERTIFICATES
UNI EN ISO 12572:2006
± 1 mm--
--
-
500 - ± 10 g/m²-
C-s1,d0
M1 (FRA)
330,9
111,97
CSTB
Two air gap
(25 mm thick)
-
FEATURE
Length 40m- - - -
Thermal resistance
Steam diffusionresistance
Resistance tocompressive stress
-
University of Perugia
Faculty of Engineering
WidthWidth 125cm- - - -
UNITS
IsoLivingIsoLiving®
10
Thermal-acoustic insulation for walls
1
Assemblage ventilated front coverIsoLiving
2After placing the
stanchions of the selectedventilated front cover,install Isoliving in the spacebetween the stanchions.
It is necessary to provide anair space between the walland the insulating material
DOUBLE-SIDED
ADHESIVE LISTELS
DOUBLE-SIDED
ADHESIVE LISTELS
Create the curtain wall
®
11
3Complete the front cover
according to the chosentechnical-architecturalsolution
IsoLiving®
Photos Assemblage ventilated front cover
IsoLivingIsoLiving®
12
Thermal-acoustic insulation for walls
1 Create the curtain wall
Assemblage internal plasterboards with nailsIsoLiving®
After placing the stanchions
for the plasterboard, install
Isoliving in the space between
them using the appropriate
distance-nail patented by
SA.M.E. , in order to create the
double air space necessary to
obtain the best performance of
the product
®
2
INTERNATIONALPATENT
NAILSNAILS
13
3 Install the plasterboard
technical data
Patented Nails by
INTERNATIONALPATENT
®
IsoLivingIsoLiving®
14
Thermal-acoustic insulation for walls
Photos internal plasterboards with nailsIsoLiving®
15
INTERNATIONALPATENT
H i g h - q u a l i t y t h e r m a lperformance due to the insertionof a double layer of “Isoliving”insulating material.
cm 50X25X20
about 12 kg(Lightened piling block)about 20 kg (piling block)
Due to the shape, it is notnecessary to lay the mortar onthe vertical joints.
about 12 hours.
Dimensions:
Weight:
LAYING
Thermal phase displacement:
THERMAL PERFORMANCE:
Thermal trasmittance U = 0,958 W/m² K
Thermal trasmittance U= 0,690 W/ K
Thermal trasmittance U= 0,520 W/ K
m²
m²
Thermal count according to the policy UNI EN1745:2005 and UNI EN ISO 6946: 1999.
Concrete block without insulation:
Concrete block insulated with a double 4.7 cmpolystyrene layer (9.4 cm total)
(-28% than a non-insulated block)
Concrete block insulated with a double Isoliving layer,8 mm thick + double air gap.
(-46% than a non-insulated block)(-24% than a insulated block with double polystyrenelayer)
HORIZONTAL SECTION
INTERNATIONALPATENT
IMPORTANT NOTICE - LIFE PROTECTION
The introducion of aluminium in the building protects from radon and methane gas. Inaddition, aluminium in the walls prevents the harmful effects of electromagnetic andwi-fi waves (major cause of cancer disease).
IsoLivingIsoLiving®
Concrete “Reflecting” Block
16
Assemblage Concrete “Reflecting” BlockIsoLiving®
2
Create the curtain wall
using the separate concrete
blocks patented by SA.M.E.®
1
Complete the front coveraccording to the chosentechnical-architecturalsolution
Thermal-acoustic insulation for walls
17
18
IsoLivingIsoLiving®
INTERNATIONALPATENT
BZ 30
BZ 25
indoor
outdoor
Omniblock Z ®
Concrete “Reflecting” Block
INTERNATIONALPATENT
FEATURESBZ 25
Dimension
Average weight
for block
Fire resistance
Trasmittance
Weight
(excluding mortar)
Acoustic insulation
BZ 30BLOCK
25x20x27,5/40,8 30x20x27,5/43,3
kg 12,5 kg 15
kg/m² 227 kg/m² 272
W/m² C° 0,40 W/m² C° 0,34
REI 180 REI 180
44 dB 46 dB
Omniblock Z® technical data
Omniblock Z is a new patented cement
block. It is made of cement and clay and it is
brick-coloured. due to its lightness and
ductility, it is widely used in the building
industry.Its particular structure is conceived to avoid
the formation of thermal gaps in the walls,
which usually develop when traditional
parallelepiped-shaped blocks with a
rectangular base are used.The insulating elements are staggered and
laid one upon the other so to guarantee the
absence of any thermal gaps in heat
transmission.
As provided by decree n°311 enclosure 1
paragraph 9, with Omniblock Z it is possible
to build walls whose superficial mass is
inferior to 230 Kg/m?.Compared with traditional walls with a
superficial mass superior to 230 Kg/m?, it
proved better containment of solar
radiation-related temperature changes.
Excellent acoustic insulation of more than
40 dB is also guaranteed, due to the mass
of the blocks, which allows the realisation of
external cladding.
IsoLivingIsoLiving®
Photos Assemblage Concrete “Reflecting” BlockPhotos Assemblage Concrete “Reflecting” Block
19