ISO Tanks Quotation Specification: 25,000L ISO Tank (T11) Container Type: ISO Tank Maximum Payload: 31950 Kg Approvals: IMDG, ISO, ADR/RID MGW: 36000 Kg CSC, TIR, RMRS Tare: 4050 Kg External Dimensions: 6058 x 2438 x 2591 mm high Approval Number: CL005 Category Specification Details (if required) Tank Material: Shell: SANS 50028-7 WNr 1.4402/1.4404 (C<0.03%), CR 2B or equivalent agreed with RS having not lower mechanical properties Ends: SANS 50028-7 WNr 1.4402/1.4404 (C<0.03%), HR No.1 or equivalent agreed with RS having not lower mechanical properties Nominal Thickness (Shell): 4.4.mm (minimum thickness 5.57 mm A/F) Nominal Thickness (Ends): 7.9mm B/F (minimum thickness 5.57mm A/F) Steam Heating: 6 longitudinal runs, total effective heating area of 8.0m2 Working Pressure: 4 bar; testing pressure: 6 bar Inlet and Outlet connections are ¾“ BSP; Blind cap and chain fitted Insulation: Specify Details 50mm mineral wool Cladding: Specify Details 1.8 - 2.0mm thick White GRP (RAL9010) Thermometer: Specify Details 1 off, -40˚C to 160˚C dual scaled; fit at rear end to lower left side External Frame Finish: Specify Details First Coat: Hempadur zinc, 15360, 30 micron min. DFT Intermediate: Hempatex primer, 1530C, 40 micron min. DFT Final Coat: Hempatex hi-build, 5643C, 50 micron min. DFT Colour BLUE (RAL5005) Decals: Specify Details Mandatory markings supplied and fitted

ISO Tanks Quotation Specification: 25,000L ISO … Tank Tech Spec.pdf · ISO Tanks Quotation Specification: 25,000L ISO Tank (T11) Container Type: ISO Tank Maximum Payload: 31950

Download PDF Report

Upload
phungtuyen
View
378
Download
10

Embed Size (px)

Citation preview

ISO Tanks

Quotation Specification: 25,000L ISO Tank (T11)

Container Type: ISO Tank Maximum Payload: 31950 Kg

Approvals: IMDG, ISO, ADR/RID MGW: 36000 Kg

CSC, TIR, RMRS Tare: 4050 Kg

External Dimensions: 6058 x 2438 x 2591 mm high Approval Number: CL005

Category Specification Details (if required)

Tank Material: Shell: SANS 50028-7 WNr 1.4402/1.4404 (C<0.03%), CR 2B or equivalent agreed with RS having not lower mechanical properties Ends: SANS 50028-7 WNr 1.4402/1.4404 (C<0.03%), HR No.1 or equivalent agreed with RS having not lower mechanical properties

Nominal Thickness (Shell): 4.4.mm (minimum thickness 5.57 mm A/F) Nominal Thickness (Ends): 7.9mm B/F (minimum thickness 5.57mm A/F)

Steam Heating: 6 longitudinal runs, total effective heating area of 8.0m2

Working Pressure: 4 bar; testing pressure: 6 bar Inlet and Outlet connections are ¾“ BSP; Blind cap and chain fitted

Insulation: Specify Details 50mm mineral wool

Cladding: Specify Details 1.8 - 2.0mm thick White GRP (RAL9010)

Thermometer: Specify Details 1 off, -40˚C to 160˚C dual scaled; fit at rear end to lower left side

External Frame Finish: Specify Details First Coat: Hempadur zinc, 15360, 30 micron min. DFT Intermediate: Hempatex primer, 1530C, 40 micron min. DFT Final Coat: Hempatex hi-build, 5643C, 50 micron min. DFT Colour BLUE (RAL5005)

Decals: Specify Details Mandatory markings supplied and fitted