ISI BAG 2 TS (English Report)

7/28/2019 ISI BAG 2 TS (English Report)

1/16

ACTIVITY II

Name of Activity : Mapping the topography of the Total Station

Day, date : Wednesday, May 22, 2013

Time : 8:00 to 15:30 pm

Location : Gajah Mountain, Bayat, Klaten

Weather : Partly Cloudy

Activity Report :

A. Total Station Mapping Tools

Total Station

Tripod

Prism


2/16

Stick

GPS

StationaryB. Safety

1. Safety Equipment

a. Check the completeness and condition of equipment

b. Use appropriate equipment capacity

c. Secure the worksheet to prevent damage

d. Check the equipment before moving

e. Put the tools neatly into the storage box after measuring

f. Return the equipment to the officer

2. Safety Person

a. Use shoe booth and security equipment


3/16

C. Introduction Tool


4/16

D. Measurement Method

a. Open the locking legs adjust height stative and stative, after appropriate

aaaaaaaaaascrup tighten the latch.

b. TS pairs and arrange for a point just above the peg through binocularsaaaaaaaaaacentering and by moving to a two-leg stand.

c. After the center, datarkan stative centering by eye cattle nivo on TS.

d. Once the center of a cow nivo, nivo tube set in a way so that the center

aaaaaaaaaamoving scroll. after all the center TS is ready for use.

e. Before the shooting point of detail, first plug the backsight and foresight and

aaaaaaaa do centering on those points.

f. TS Turn on by pressing the power button.

g. TS confronted the backsight and press 0set.

h. Press command colect the data and input project name, and then press

aaaaaaaaaacommand occ.pt # input and fill in the information requested.

i. Coordinate input device by pressing and press ocnez nez, after that input the

aaaaaaaaacoordinates manually by typing, sought to coordinate itself through GPS

aaaaaaaaamarking.

j. Backsight and press command input data that appear on the screen and then

aaaaaaaaapress meas nez.

k. TS swivel toward foresight and press orders fs / ss then input the data

aaaaaaaaaarequested and press meas and nez.

l. Then turn the telescope into extraordinary circumstances and the data fed as

aaaaaaaaadirected earlier.

m. TS confronted the backsight (amazingly) and fed the data.

n. Perform detailed point shooting with moving prism as needed.

o. Perform measurements to completion in accordance with the above

aaaaaaaaaaprocedure.


5/16

E. Data Processing

After measurement framework map is completed, the next stage of processing the

data into contour. Here will be described the process:

1. Download Data

1. Window Display

Click Start Programs Topcon Topcon Link

Double click on the desktop shortcut Topcon Link

- Titlebar: consists of the name - the name of the program

- System Button: minimizes, maximizes, and close

- Menubar: composed from the drop - down function Topcon Link

- Toolbar: consists of a button - the button shortcut menu function Topcon Link

- Work area: display the dialog box, job information file, and Pop-Up menu

- Statusbar: display information about Topcon Tools and files - files

- File Information: look for Linear Units, Angular Unit, coordinate type

system and job information that is being opened.

2. Download the data from Total Station to a computer

Click File Import from Device from the menu bar or toolbar select import from

the device as shown below


6/16

Then will pop up a dialog box like this, then click the folder Topcon Total Station of

aaaaaaaaathe dialog box


7/16

Double Click the Add New Station

Shown Dialog Box Create Station

General Name (Name): up

Note (Specification Data Transferred): ---

Port (COM 1 / COM2): COM 2

Model (Equipment Type): GPT-2000

Advanced communication type parameter

: 9600

: None

: 8

: 1

: ONE WAY

Note:

ONE WAY: To download data from the device to the computer

ACK / NACK: To upload the data from the computer to the Instrument

This parameter should be the same as the comm. Parameter Total Station

Click on OK


8/16

Click file.txt Click the arrow ()


9/16

Perform file download dialog box from Total Station define the data folder in

aaaaaaaaacomputer.

Click Start (after serial cable attached to the device and the computer)

Press the button on the Total Station Function (F) Send YES

Shown in tool Sending data!

In the Import from Device dialog box appears file1 (the data has been transferred)

Right-click the file1 (can rename, copy, etc.)

Data will be opened directly in Topcon Link.

Here above is a step - step data transfer via the Topcon Link.

Once the data is successfully downloaded or transferred to a PC, the next step open

aaaaaaathe transferred file, and edit like below format, inside microsoft exel.

Here are the results of the data that has been shot TS convert into excel format.


10/16

1 463555 9141391 195.95

1 463579 9141398 197.55

1 463584 9141375 200.55

1 463593 9141366 202.15

1 463608 9141384 204.15

1 463628 9141392 205.65

1 463618 9141371 208.65

1 463585 9141347 210.65

1 463574 9141341 210.65

1 463587 9141313 219.35

1 463607 9141327 223.51

1 463632 9141338 223.35

1 463635 9141330 225.75

1 463636 9141327 230.6

1 463635 9141314 231.4

1 463649 9141313 238.2

1 463652 9141296 241.7

1 463621 9141292 248.138

1 463623 9141274 251.138

1 463601 9141259 268.63

1 463607 9141234 277.878

1 463624 9141216 283.578

1 463623 9141210 289.578

1 463582 9141176 297.078

1 463600 9141163 297.078

1 463602 9141156 296.328

1 463616 9141175 286.578

1 463659 9141133 276.428

1 463676 9141115 266.228

1 463684 9141107 260.228

1 463700 9141095 254.228

1 463717 9141081 250.428

1 463738 9141066 248.928

1 463760 9141064 241.428

1 463779 9141061 237.138

1 463809 9141063 236.428

1 463652 9141420 182

1 463654 9141401 185.925

1 463670 9141383 191.082

1 463680 9141364 195.093

1 463688 9141345 199.822

1 463691 9141341 201.747

1 463704 9141320 208.827


11/16

1 463676 9141292 216.467

1 463663 9141268 223.919

1 463676 9141228 234.083

1 463658 9141206 248.583

1 463697 9141207 240.471

1 463711 9141239 231.406

1 463722 9141262 225.356

1 463756 9141273 214.232

1 463787 9141278 209.923

1 463810 9141254 206.965

1 463808 9141129 212.373

1 463783 9141127 213.591

1 463777 9141114 221.007

1 463751 9141136 231.573

1 463733 9141157 239.127

1 463720 9141170 247.587

1 463700 9141171 260.72

1 463672 9141184 271.71

1 463647 9141177 278.216

1 463628 9141180 287.714

2. Creating Topographic Maps With Surpac

Here is the data format that will be shot if the TS through Surpac software.

under the data processed using microsoft exxel. And after the data are like below, file

storage using CSV format (comma Delimited) and the file name plus sign (") and. Str

1 463555 9141391 195.95

1 463579 9141398 197.55

1 463584 9141375 200.55

1 463593 9141366 202.15

1 463608 9141384 204.15

1 463628 9141392 205.65

1 463618 9141371 208.65

1 463585 9141347 210.65

1 463574 9141341 210.65

1 463587 9141313 219.35

1 463607 9141327 223.51

1 463632 9141338 223.35

1 463635 9141330 225.75

1 463636 9141327 230.6

1 463635 9141314 231.4

1 463649 9141313 238.2

1 463652 9141296 241.7


12/16

1 463621 9141292 248.138

1 463623 9141274 251.138

1 463601 9141259 268.63

1 463607 9141234 277.878

1 463624 9141216 283.578

1 463623 9141210 289.578

1 463582 9141176 297.078

1 463600 9141163 297.078

1 463602 9141156 296.328

1 463616 9141175 286.578

1 463659 9141133 276.428

1 463676 9141115 266.228

1 463684 9141107 260.228

1 463700 9141095 254.228

1 463717 9141081 250.428

1 463738 9141066 248.928

1 463760 9141064 241.428

1 463779 9141061 237.138

1 463809 9141063 236.428

1 463652 9141420 182

1 463654 9141401 185.925

1 463670 9141383 191.082

1 463680 9141364 195.093

1 463688 9141345 199.822

1 463691 9141341 201.747

1 463704 9141320 208.827

1 463676 9141292 216.467

1 463663 9141268 223.919

1 463676 9141228 234.083

1 463658 9141206 248.583

1 463697 9141207 240.471

1 463711 9141239 231.406

1 463722 9141262 225.356

1 463756 9141273 214.232

1 463787 9141278 209.923

1 463810 9141254 206.965

1 463808 9141129 212.373

1 463783 9141127 213.591

1 463777 9141114 221.007

1 463751 9141136 231.573

1 463733 9141157 239.127

1 463720 9141170 247.587

1 463700 9141171 260.72

1 463672 9141184 271.71


13/16

1 463647 9141177 278.216

1 463628 9141180 287.714

a. Once the data is in the save in the desired folder, then open the Surpac software. Makea folder that used to work in Surpac as work kana directory by clicking on the file,

and then select set as work directory. The next steps include the coordinates of the

point of the shot, with double-click the file that has been saved earlier.

b. Create a triangle


14/16

Press aply command, the result will be like this;

c. Open the triangle and create contour lines.


15/16

The result will be like this:

d. Print Contour Map Of Surpac, ie press command autoplot

Press the apply command, then the result is as follows:


16/16

then press the enter key and edit the words in the column provided in the format.

After all finished editing then save as an image file into a format (. Png), and a map is

available for printing.

Documents

ISI BAG 2 TS (English Report)