ISAGANI M. ROSALES Pook ni Banal, San Pascual, Batangas Philippines Passport No. : EB6332045 Cell Phone No. : +639177031375 E-mail add : r.isagani@yahoo.com

POSITION APPLIED : QA / QC ENGINEER QUALIFICATIONS : CERTIFIED ASSOCIATE WELDING INSPECTOR

American Welding Society ( AWS ) CERT. NO.: 14010084 Valid Date: January 01 2014

Expire Date: January 01 2017

: CERTIFIED WELDING INSPECTOR Philippine Welding Society ( PWS ) CERT. NO. 2011 - 100220 Valid Date : September 14, 2014

Expire Date : September 14, 2017

: CERTIFIED PMI OPERATOR Positive Materials Identification (PMI)

Niton XL3t 800 XRF Analyzer SPECTRO CCD Arc/Spark Analyzer XMET 3000Txt XRF Analyzer

: RT FILM INTERPRETATION SNT-TC-1A RTFI November 19-23, 2012

: CERTIFIED NDT (Visual Testing Level – II)

VISUAL TESTING LEVEL II RATING 86.76% May 16 – 18, 2011

EDUCATIONAL ATTAINMENT : BS Industrial Engineering ( BSIE )

SY : (1999 - 2005) University of Batangas, Hilltop, Batangas City

Job Summary: Have ten (10) years experience in field of welding, engineering construction and fabrication of Structural steel members, Tanks and Vessel, Bins and Chutes for Oil and Gas and Power Plant project. Experience in the development of plans, drawings, procedures, inspection requirements, acceptance criteria and specification for weldments. Also have experience in detection and measurements of weld discontinuities by application of visual or other nondestructive evaluation process to a written procedure. Implementing operational techniques and activity used to fulfill quality control requirements for weldments using quality system. Well verse in interpreting various code such as ASME VIII, AWS D1.1, API 1104, ASME IX, AND B31.3, ASME VIII DIV 1.

A. WORK EXPERIENCE (LOCAL)

POSITION: LEAD QC INSPECTOR Atlantic, Gulf & Pacific Company of Manila, Inc. June 16, 2007 to May 31, 2016

PROJECT INVOLVED

1. Project : ICHTHYS ONSHORE LNG FACILITIES Atlantic, Gulf & Pacific Company of Manila, Inc. San Roque, Bauan, Batangas, Philippines

Project Duration : October 15, 2013 – May 31, 2016 LOCAL INSTRUMENT ROOM-JKC ICHTHYS LNG JOINT VENTURE PROJECT

2. Project : Ventech Engineers LLC Atlantic, Gulf & Pacific Company of Manila, Inc. San Roque, Bauan, Batangas, Philippines

Project Duration : November 15, 2012- October 15, 2013 FABRICATION OF 13 UNITS PROCESS COLUMNS (ASME CODED)

Project Description : Fabrication of Shell Plate & Miscellaneous Steel

• AGO Distillate Side Strippers Splitter Column

• Diesel Side Strippers De- Isopentanizer Column

• Kerosene Side Strippers De-Ethanizer Column

• Desulfurizer Stripper Column Debutanizer Column

• Stabilizer Column Sour Water Stripper Column

3. Project : Various Project Atlantic, Gulf & Pacific Company of Manila, Inc. San Roque, Bauan, Batangas, Philippines

Project Duration : March 23, 2010- November 15, 2012

DUTIES AND RESPOSIBILITY

� Review Project Specification / Code requirements and its implementation. � Conducts actual inspection of materials, equipments to conform to reference standards and

specifications. � Report to immediate Supervisor the status of fabrication and erection activities � Check and review the welding procedures and welders qualification. � Check and review purchase orders to ensure that base and filler materials are properly

specified. � Check and identify materials as they are received against the purchase specification. � Check the condition and storage of the filler metal. � Check joint fit and its cleanliness. � Check weld joints preparation. � Performs inspection of welds before, during and after fabrication or erection. � Verify the in-process Non-Destructive Examination (NDE) is performed as per project

specification. � Implements approved working procedures according to codes, standards and specification.

� Maintains and review welder’s qualification records and equipment calibration records. � Monitors welders performance and review material test reports. � Check welding parameters and techniques for compliance with welding procedure. � Check inter-pass cleaning and temperature. � Check quality of individual weld pass. � Performed visual welding inspection. � Check dimensional accuracy of completed weldment. � Prepare and maintain inspection reports.

B. WORK EXPERIENCE ( ABROAD ) QA/QC ENGINEER Leo Steel Construction Company W.L.L. DOHA QATAR St. 38, Gate 52 Industrial Area, Doha Qatar November 01, 2008 – March 2, 2010 PROJECT INVOLVED

A. Emiri Hangar A & B (Airline Facilities) – Fabrication and Erection of Steel Structure New Doha International Airport, Overseas Bechtel International Project B. ULD Rack (Cargo Terminal) – Erection of Steel Structure New Doha International Airport, Overseas Bechtel International Project

Project Description New Doha International Airport (NDIA) is slated to replace the old Doha International Airport as Qatar’s only international airport in 2011. It is expected to be the first airport in the world fully handles Airbus A380, the world’s biggest commercial aircraft. It is build next to the old airport, about less than two miles east. Duties and Responsibilities � Prepares Method Statements and Inspection Test Plan as per project standards and

specifications. � Responsible for the proper documentation of approved Document Submittals, Materials

Certificates, Tools and Equipment Certificates, Qualified Welders List, Welding Procedure Specification.

� Reviews drawings used in fabrication / erection area were approved or within the latest revision.

� Witness Welder Performance Qualification Test and Procedure Qualification Test � Review and Certify Welding Procedure Specifications and Welders Performance

Qualification Record � Conduct Welding / Visual Inspection � Monitor Welding Production and Welders Performance � Investigate / Analyze causes of High rejection rate for welds(Structural & Piping) � Prepare / Review Work Instruction with regard to Production Welding Inspection. � Checks fit-up of structure prior for welding. � Conduct weld visual and dimensional before, during and after welding. � Assists in inspection and testing of the NDT technician. � Coordinates to client QC representative for verifying some other issues or problems

encountered during inspections. � Preparing of reports for approval of results inspection with attached supporting documents

to Client.

SHOP ENGINEER Wu Kong (S) Pte. Ltd. Steel Division PEZA, Rosario, Cavite, Philippines October 11, 2005 – June 15, 2007

Company Overview :

▪ Export of fabricated steel Menshin houses for Japan. ▪ Manufactures of pre-fabricated structural components of traditional Japanese houses using

H-beams. Duties and Responsibilities

� Ensure that the requirements of WPS and other approved welding procedures are properly

implemented � Ensure that required NDE requirements are applied on the weld joints that NDE are carried

out in timely manner. � Maintain close coordination with Production Welding Department, Welding Supervisors and

Discipline QC Supervisors, Client Inspectors. � Conduct weld visual and dimensional before, during and after welding. � Check and review the welding procedures and welders qualification. � Monitors manpower performance and activities if it conforms to set standards and section

objective. � Implements work instruction and standard operating procedures of fabrication, assembly

and loading activities. � Monitors and controls proper operation of machine and tools used in fabrication and

assembly section to ensure production runs smoothly � Implements employee work schedule in assembly section provided by the superior and

communicates with the subordinates to ensure that the goals and objectives of the section are met.

� Maintains and implement continuous improvement in health, safety environmental and quality assurance practices

PERSONAL PROFILE Date of Birth : October 20, 1981 Civil Status : Married Citizenship : Filipino Religion : Roman Catholic Sex : Male Height : 5’5” Weight : 160 lbs. Special Skills : Computer Literate (Microsoft Office) Dialect Spoken : Conversational English and Tagalog TIN Number : 302-577-595 SSS Number : 04-1654941-4 TRAININGS & SEMINARS ATTENDED Certification Scheme for Welding and Inspection Personnel (CSWIP 3.1 LEVEL 2 COURSE)

Logistic Marketing Phils., Inc. 3F, 111 Paseo de Roxas Bldg,, Paseo de Roxas corner Legaspi Street, Legaspi Village, Makati City, Philippines

AWS Certified Welding Inspector Course (AWS-CWI) AGUILA GROUP COMPANIES, AGC DEVELOPMENT CORP. Ascott Makati Hotel, Glorietta 4, Ayala Center, Makati City, Philippines October 21-25 2013 RT FILM INTERPRETATION ( RTFI ) APEX ENGINEERING SERVICES ( AES ) 18 Rose Avenue, Pilar Village Las Pinas City, Phil November 19-23, 2012 SPECTRO CCD Arc/Spark Analyzer Positive Materials Identification ( PMI ) AG&P San Roque, Bauan, Batangas June 06, 2012 LEICA GEOSYSTEMS HDS SCANSTATION C10 Basic HDS Training AG&P San Roque, Bauan, Batangas May 8-10, 2012 XMET 3000Txt XRF Analyzer Operations Training Positive Materials Identification ( PMI ) AG&P San Roque, Bauan, Batangas April 17, 2012 Niton XL3t 800 XRF Analyzer Operations Training Positive Materials Identification (PMI) AG&P San Roque, Bauan, Batangas April 4, 2012 Welding Inspector Course (PWS-CWI) Philippines Navy Golf Club, TESDA Complex, Taguig City PWS-CWI Licensure Examination 91.12% Rating August 29 – September 02, 2011 NDT Training & Certification (Visual Testing Level – II) AG&P San Roque, Bauan, Batangas VISUAL TESTING LEVEL II RATING 86.76% May 16 – 18, 2011 Character References:

� Engr. Tomas R. Carmelo

QC Head Atlantic Gulf & Pacific Company of Manila, Inc. San Roque, Bauan, Batangas Phils.

I hereby certify that the above information is true and correct to the best of my knowledge and ability.

__________________ Isagani M. Rosales