Disclosure to Promote the Right To Information

Whereas the Parliament of India has set out to provide a practical regime of right to information for citizens to secure access to information under the control of public authorities, in order to promote transparency and accountability in the working of every public authority, and whereas the attached publication of the Bureau of Indian Standards is of particular interest to the public, particularly disadvantaged communities and those engaged in the pursuit of education and knowledge, the attached public safety standard is made available to promote the timely dissemination of this information in an accurate manner to the public.

इंटरनेट मानक

“!ान $ एक न' भारत का +नम-ण”Satyanarayan Gangaram Pitroda

“Invent a New India Using Knowledge”

“प0रा1 को छोड न' 5 तरफ”Jawaharlal Nehru

“Step Out From the Old to the New”

“जान1 का अ+धकार, जी1 का अ+धकार”Mazdoor Kisan Shakti Sangathan

“The Right to Information, The Right to Live”

“!ान एक ऐसा खजाना > जो कभी च0राया नहB जा सकता है”Bhartṛhari—Nītiśatakam

“Knowledge is such a treasure which cannot be stolen”

“Invent a New India Using Knowledge”

है”ह”ह

IS 1200-14 (1984): Method of measurement of building andcivil engineering works, Part 14: glazing [CED 44: Methodsof Measurement of Works of Civil Engineering]

IS : 1200 (Part 14) -1984(Reaffirmed 2007)

Indian StandardMETHOD OF MEASUREMENT OF

BUILDING AND CIVIL ENGINEERING WORKS

PART 14 GLAZING

( Third Revision)Fourth Reprint JUNE 2008(Including Amendment No.1)

UDC 69.003.12 : 698.3

© Copyright 1985BUREAU OF INDIAN STANDARDSMANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG

NEW DELHI 110002

Gr 2 February 1985

IS : 1200 ( Part 14 ) • 1984

Indian StandardMETHOD OF MEASUREMENT OF BUILDING

AND CIVIL ENGINEERING WORKS

PART 14 GLAZING

( Third Revision )

Method of Measurement of Works of Civil Engineering( Excluding R\ver Valley Projects ), DDC 44

Chairman

SJIRI A. C. PANCHDHARJ

Representing

Central Vigilance Commission, New Delhi

Members

ADIiISIlASI ABAYANfA (PARSHIKSAN) Public Works Department, LucknowDEPUTY DIIH~( TOR ( CiAWl:SHAN ) ( Alternate )

SHRI B. G. AIIUJA Builders Association of India, BombaySHRI K. D. ARCOl Engineers India Limited, New Delhi

SURl T. V. SlT/\RAM ( Alternate)SHIU N. K. ARORA Bhakra Management Board, Nangal Township,

ChadigarhSURf R M. JOLty ( Alternate)

SARI G. B. BAJAJSfllU P. BANEHJEE

Bombay Port Trust» BombayMinistry of Shipping and Transport (Roads

Wing)

Limlted,

SHill R. G. TPI.~WANI ( Alternate)~HfU G. K. DESI-JPANDE Public Works Department, BombayDIRECTOR ( JRI ) Irrigation Department, Government of Uttar

Pradesh, LucknowCentral Water Commission, New DelhiDfRFCTOR (RAJFS ~NO COS1S )

DEPUTY DJr~EcrOR ( RATt.SAND CoSTS) ( Alternate)

SURI P. N. GAOl Institution of Surveyors, New DelhiSHRI D. S. TAtvlBANIC.AR ( Alternate)

SHRI P. S. HARI RAO Hindustan Construction CompanyBombay

SHRI N. f\'t. DASTANE ( Alternate)SURI G. B. JAHAGJllDAR The National Industrial Development Corpora...

tion Limited, New Delhi

( Continued on PQg~ 2 )

@ Copyright 1985

BUREAU ()F INDIAN STANDARDS

This publication is protected under the Indian Copyright Act (XIV or 1957) andreproduction in whole or in part by any means except with written permission of thepublisher shall be deemed to be an infringement of copyright under the said Act.

IS : 1%00 ( Part 14 ) • 1984

( Contillued from page 1 )

MembersJOINT DIRECTOR ( D )

SHRI A. K. LAL ( Alternate)SHRI ASHIT RANJAN KARSHRI S. K. LARASHRJ K. K. MADHOK

RepresentiIIgNational Buildings Organization. NewDeIhl

Calcutta Port Trust, CalcuttaInstitution of Engineers ( India .~, CalcuttaMES Builders Association of India ( Regd ).

New Delhi

Director General. lSI ( Ex-officio Member )

SUPERINTENDING SURVEYOR OFWORKS ( AVIATION)

SURVEYOR OF WORKS.I( AVIATION) (Alternate)

SHRI G. RAM.\N,Director ( crv Engg )

SHill R. K. BAHL (Alternate)SHRI DATTA S. MAIJK Indian Institute of Architects, Bombay

PROF M. K. GOODOLE ( Alternate)SHRI R. S. MURTHY Gammon India Limited, Bombay

SHRI H. D. MATANOE ( Alternate)SHRI C. B. PATEL M. N. Dastur and Company Private Limited,

CalcuttaSHRI B. C. PATEL ( Alternate)

SHRI K. A. PATNAIK Bureau of Public Enterprises, New DelhiSHRJ V. G. PATWARDHAN Ministry of Defence

SHRf C. G. KARMARKAR ( Alternate)DR R. B. SINGH Banaras Hindu University, BanarasSHRI R. A. SUBRAMANIAM Hindu-tan Steel Works Construction Limited,

CalcuttaCentral Public Works Department, New Delhi

SecretarvSHRI K M MATHUR

Senior Deputy Director (Civ [nai ), lSI

2

IS : 1200 ( Part 14 ) • 1984

Indian StandardMETHOD OF MEASUREMENT OF BUILDING

AND CIVIL ENGINEERING WORKS

PART 14 GLAZING

( Third Revision)

o. F 0 J~ E \V 0 R D

0.1 This Indian Standard ( Part 14 ) ( 1 hird Reviv.on ) was adopted by theIndian Standards Invtitution on 12 Decem bet 19~;..l, after the draft finalizedby the Method of Measurement of Works of CIvil Engineering ( ExcludingRiver Valley Projects) Sectional Committee had been approved by the CivilEngineering Division Council.

0.2 Measurement occupies a very i mportant place in the planning andexecution of any civil engineering work from the time of f rst estimates tothe final cornpk non and settlement of payments of the project. Themethods followed for the measureme.it are not uniform, and considerabledifferences exist between the practices follow, d hy one construction agencyand another and also between various Central and State Governmentdepartments, While it is recognized that each system of measurement hasto be specifically related to the admitustrativc and financial organizationswithin the department responsible for the work, a unification of thevarious systems at the technical Jevel has been accepted as very desirable.specially as it permits a wider circle of operation for civil engineeringcontractors and eliminate ambiguities and misunderstandings arising outof inadequate understanding of the various systems followed.

0.3 Among the various civil engineering items, measurement of buildinghad been the first to be taken up for standardization and a consolidatedstandard ( IS : 1200 l~ having provisions relating to building works, ,vas firstpublished in 1958 and subsequently revised in 1964 and 1970.

0.4 In the course of usage of this standard by various constructionagencies in the country, several clarification- and suggestions for modifica­tions were received and as a result of study, the Sectional Committeeresponsible for the preparation of this standard decided that its scope,besides being applicable to building, should be expanded so as also tocover the method of measurement applicable to civil engineering works.such as. industrial and river valley project works.

3

IS : 1200 ( Part 14 ) • 1984

0.5 Since measurement of one type of trade is not related to that ofanother one, and also to facilitate the second revision of IS : 1200 - 1964­the Sectional Committee decided that each type of trade as given in IS~1200-1964* be issued scparauIy as different parts. This will also be helpfulto the specific users in various trades in using the standard.

0.5.1 This part 14 covering glazing was, therefore, issued as a separatestandard for the first time in 197U and has now been revised in orderto kcv p the provisions in line with the latest practice.

0.6 For the purpose of dCCfU ng whether a particular requirement of thisstandard is complied \\ ith the unal value, observed or calculated, express­ing the result of a mcasu. erne nt, shalt he rounded ofT in accordance withJS : 2-1960"t 1 he number of significant places retained in the rounded offvalue shou'd be the same as that of the specified value in this standard.

I. SCOPE

1.1 This standard ( Part 14 ) covers the method of measurement of glazingn buildings and civil engineering works.

2. GENERAL RULES

2.1 Clubbing of Items - Items may be clubbed together provided these areon the basis of the detailed dcsc tion of items stated in this standard.

2.2 Booking of Dimensions - In booking dimensions, the order shall beconsistent and generally in the sequence of length, breadth or width and

eight or depth of thickness.

2.3 Description of Items -- 1 he description of each item shalt, unlessstated otherwise) be held to include, where neecessary, conveyance and

elivery, handling, loading, unloading, storing and waste.

2.4 Measurements - All works shall be measured net in decimal system, asfixed in its place as given in 2.4.1 and 2.4.2.

2.4.1 Dimensions shall be measured to the nearest 0·01 m.

2.4.2 Areas shall be worked out to the nearest 0·01 nil.

2.5 Bills ofQu8ntities - The bills of quantities shall fully describe the

.Mcthod of measurement of building and civil engineering works (revised).tRules for rounding orrnumerical values ( revised ).

4

IS : 1200 ( Part 14 ) - 1984

materials and workmanship, and accurately represent the work to beexecuted.

2.6 The various kinds of sheets for glazing like glass and other materialsshall be described and shall be measured separately. In the cave of wiredglass design or pattern of reinforcement shall be described and in case offrosted glass it shall be stated whether it is on one or both sides.

1.7 Work in wood, metal concrete and the like shall be measuredseparately,

2.8 'The method of glazing shall be described and measured separatelyunder the following classification, The type and putty shall also bedescribed:

a) Front and back putty and sprigged or fixed with glazing pins,

b) Bedded in putty and fixed with beads. and

c) Bedded in rubber or velvet and fixed with beads (whereverrequired).

3. i\1~l'HOD OF MEASUREMEN'f

3.1 Work shall be measured in square metres stating the thickness.

3.1.1 The dimensions of each pane shall be clear dimensions of opemngpILlS width of rebates of structural member of window/door. The paneother than rectangular or sq uare shall be measured as the smallest rectan­gular urea from which pane can be cut, Straight cutting ~h(tH br deLn:l.:l~

[0 be included in the item.

3.2 Circular cutting shall be measured as extra in running metres. Theterm circular shall be deemed to include any form of curve.

3.3 Glass and sheet louvres shall be described and enumerated.

3.4 Hacking-out old broken glass and preparing for new glass shall bemeasured in square metres.

J.S Holes drilled in work shall be enumerated stating diameter of the hole.type and thickness of the glass/sheet and size of the pane.

3.6 Grinding, polishing and rounding off edges of glass or glazing sheetshall be described and measured in running rnctres.

5

BUREAU OF INDIAN STANDARDSHeadquarters:Manak Bhavan, 9 Bahadur Shah Zafar Marg, NEW DELHI 110002Telephones 23230131,23233375,23239402 Fax 91+01123239399,23239382E • Mall lnfo@ brs org In website http //W'N'N brs org In

Central Laboratory:

Plot No 20/9, Site IV, Sarubabad Industnal Area, SAHIBABAD 201010

Regional Offices:Central Manak Bhavan, 9 Bahadur Shah Zafar Marg, NEW DELHI11 0002

'Eastern 1/14CIT SchemeVIl M, V I P Road, Kankurgachl, KOLKATA 700054

Northern SCQ 335-336, Sector 34-A, CHANDIGARH 160022

Southern CIT Campus, IV Cross Road, CHENNAI600113

tWestern Manakalaya, t9, MIDC, Behind MarolTelephone Exchange,Andhen (East), MUMBAI 400093

Branch Offices:'Pushpak', Nurmohamed Shaikh Marg, Khanpur, AHMEDABAD 380001

Peenya Industnal Area, 1st Stage, Bangalore-Tumkur Road, BANGALORE

Cornrnercral-cum-Offtcs Complex, Opp Dushera Maidan, Arera Colony,Bittan Market, BHOPAL 462016

62-63, Ganga Nagar, Unit VI, BHUBANESHWAR 751001

5th Floor, Koval Towers, 44 Bala Sundaram Road, COIMBATORE 641018

SCO 21, Sector 12, Fandabad 121007

SavrtnComplex, 116 G T Road, GHAZIABAD 201001

53/5 Ward No 29, R G Barua Road, 5th By-lane, Apurba Sinha Path,GUWAHATI781003

5-8-56C, L N Gupta Marg, Nampally Station Road, HYDERABAD 500001

Pnthav: Raj Road, Oppostte Bharat Overseas Bank, C-Scheme, JAIPUR 302001

11/418 B, Sarvodaya Nagar, KANPUR 208005

Sethi Bhawan, 2nd Floor, Behind Leela Cinema, Naval Kishore Road,LUCKNOW 226001

H No 15, Sector-3, PARWANOO, Oistt Solan (H P) 173220

Plot No A·20-21, tnstrtunonal Area, Sector 62, Goutam Budh Nagar, NOt DA 201307

Patltputra Industrial Estate, PATNA 800013

Plot Nos 657-660, MarketYard, Gultkdl, PUNE 411037

"Sahaianand Housel! 3,d Floor, Bhaktmacar Circle, 80 Feet Road,RAJKOT 360002

T C No 2/275 (1 &2), Near Food Corporanon of IndIa, Kesavadasapuram-Ulloor Road,

Kesavadasapuram, THIAUVANANTHAPURAM 695004

1't Floor, Udyog Bhavan, VUDA, Smpurarn Junction, VISHAKHAPATNAM-03

·Sales OffIce IS at 5 Chowrtnghee Approach, PO Pnncep Street, KOLKATA 700072

tSales OffIce (WRO) Plot No E-9, MIDC, Ad No 8, Behmd Telephone Exchange,Andhen (East), Mumbal-400 0093

Printed b) the Manager. Govt of India Pre-s. Fandabad

Telephone277 0032

23237617

23378662

2609285

22541984

28329295

5601348

8394955

2423452

2403139

221 0141

2292175

2861498

2456508

23201084

2223282

2233012

261 8923

235436

2402206

2262808

24274804

2378251

2557914

271 2833

23553243

28329295