Ipocc Quick Start En

Deploying Avaya IP Office Contact CenterQuick Start

Deployment process

February 2014 1

Site preparation checklist

# Task Description Notes

1 Ensure all physicalcomponents areavailable on thecustomer network.

IP Office Contact CenterserverIP Office serverXMPP server (optional forchat functionality)Agent workstationsTelephones

See platform requirements.

2 Ensure that theadditional hard diskdrives for IP Officeserver type areavailable. (Optional,only if you want to use Contact Recorder)

IP Office Server EditionIP 500 V2

Note:IPOCC does notsupport IP 500 V1server.

For information about thehard disk drive typesdownload the documentsfrom the HP support site orDell support site.For information about addingadditional hard disk drivessee, Contact Recorder.For information aboutdeploying IP Office ServerEdition see, Deploying IPOffice Server EditionSolution.For information aboutinstalling IP 500 V2 see,Installing IP500/ IP 500 V2.

Note:To Ignite the additionalhard disk drive for ContactRecorder see, ContactRecorder.

3 Telephony and internetservices are in place.

Service Providers

IP Office Contact Center server requirementsThe requirements are as follows:

IP Office Contact Center server requirements

2 February 2014

Operating system Microsoft Windows Server 2008 R2 Standard 64bit Edition SP1Microsoft Windows Server 2012 R2 Standard 64bit Edition

Processor Intel Xenon E3 Quadcore 3.1 GHzMemory 8 GB DDR3 ECCHard drive 2 Seagate ST500DM002 500 GB 7200 RPM, SATA 6 G 16 MB Cache

Raid 1Raid controller Raid Controller Intel C202 onboardDisk spaceallocations - 500 GB disk space for complete OS, databases, and applications

Media DVD-ROM driveKeyboard Multifunction keyboardNetwork 1NIC 1 GB, network or Ethernet card

Note:IP Office Contact Center supports only one NIC. If you have multipleNICs disable all the other NICs.

Agent workstation requirementsProcessor Intel Pentium 4 processor 2.2 GHz or higherOperating system Microsoft Windows 7, or Windows 8.1Memory Minimum 4 GB RAMHard disk Minimum 10 GBKeyboard and mouse Multifunction keyboard and mouseBrowser Microsoft Internet Explorer 8.x or higher

Mozilla Firefox 3.6 or higherNetwork Ethernet card

Agent workstation requirements

February 2014 3

Planning checklist

Plan for installation and configuration by meeting with the customer to collect site-specific information andnetwork information and to ensure that they are prepared for delivery and installation.


1 Download documentsfrom the Avaya SupportSite Documents andDownloads.

Use the planningdocuments to ensure thecustomer site is preparedand use forms to gathercustomer site-specificdata.

On the Avaya Support Site,in the Enter Your ProductHere field, type IPOffice ContactCenter.

2 Complete the Avaya IPOffice Contact CenterConfigurationWorksheet.

Customer data includes: Server information Agent information Job codes Topic assignments

Download and use theMicrosoft Excelspreadsheet as a template.

3 Download thedocuments from the HPsupport site or DellSupport site.

Use the respective guidesto add an additional harddisk drive for ContactRecorder.

4 Download documentsfrom the Avaya SupportSite Documents andDownloads.

Use the planningdocuments to install andconfigure the IP OfficeServer Edition or IP 500V2

On the Avaya Support Site,in the Enter Your ProductHere field, type IPOffice.

5 Plan endpointdeployment.

Avaya 1400 series phoneAvaya 1600 series phoneAvaya 9500 series phoneAvaya 96x1 (H.323)deskphoneAvaya 96x0 (H.323)deskphone

6 Ensure customer hasrequired components.

XMPP serverAgent workstations

Use the Site preparationchecklist.

4 February 2014

Key customer configuration information

Using the IP Office Contact Center Configuration WorksheetThe worksheet is a Microsoft Excel spreadsheet that captures and organizes customer siteinformation used by the installer during system configuration tasks. Each tab in the workbookcorresponds to an aspect of the system configuration.Before you beginCopy the Avaya IP Office Contact Center Configuration Worksheet from the IPOCC_DVD andsave it on a computer with Microsoft Excel. Typically, Avaya IP Office Contact CenterConfiguration Worksheet is located at Utilities.About this taskUse the worksheet to collect customer configuration data and create export files for serverconfiguration.

Procedure1. Open the spreadsheet .2. Enable macros.

Important:Save the spreadsheet as .xlsm format to enable macros.

3. Use Save as to make a copy with a unique name for the customer.4. Read the instructions on the Brief Instruction tab of the work sheet before you fill

in the required information, marked in red (mandatory field), within each tab.The spreadsheet populates fields in the other tabs. For more information see, Important fields of the configuration worksheet on page 6.The Change me fields in the spread sheet are optional, used for configuring thechat and email.

5. Click Create Data Import to generate data import files.

Next stepsDuring configuration you need the DataImport.exe for IP Office Contact Center Server andconfiguration.csv for IP Office.


February 2014 5

Related topics:Important field descriptions of the configuration worksheet on page 6

Important field descriptions of the configuration worksheet

Note:The following table lists only the minimum required fields that you need to fill in theconfiguration worksheet. For more details, lookup the tool tips in the configurationworksheet.

Name DescriptionBase Data tab Type the following:

Name of the IP Office Contact Center Name of the chat server Chat and E-mail domain name. For

example, customer.com(optional)

Note:Check the number range of topics. If youmake any change you must also updatethe change in the Topics tab.

Chap tab Type the following ip address: IP Office Contact Center server IP Office DNS SIP domain

Note:The name of the SIP domain must be thesame as the SIP domain name in System> LAN1 > VOIP tab of the IP Officeconfiguration. The name of the SIPdomain must be in lower case.Verify the number for the SIP extensions.Do not use this number in the IP Office. Ifnecessary change the partitioning of thechannels for Queuedevices and IVR. ForQueuedevices automatically the range70000-70059, for IVR Ports 80000-80029is used.


6 February 2014

Name DescriptionTopic tab Type the topic details.Agent groups tab Type the agent group details.Agents tab Type the agent details.Topic-AG-Assigment tab Type the topic and agent assignment

details.

Packaging and order codesThe following IP Office Contact Center license bundles are available:

Material code Description306493 IP Office Contact Center Base 30306640 IP Office Contact Center Base 100306495 IP Office Contact Center 1 voice agent license with skills based

routing and call recording306496 IP Office Contact Center 1 Multichannel License with email, chat and

outbound campaigns306497 IP Office Contact Center 1 Supervisor License306641 IP Office Contact Center Base 30 to Base 100 migration

IP Office Contact Center Base 30 bundleIP Office Contact Center:

Note:Use Avaya WebLM to install the PLDS license.

PLDS license DescriptionVALUE_CIE_PX_IPO (1) Single PBX connection IP OfficeVALUE_CIE_IVR_CON (1) 1 CHAP portVALUE_CIE_IVR_PORT (Channels 90) 90 channels (maximum for 32bit CHAP)VALUE_CIE_CC_CLIP 10000 addressesVALUE_CIE_CC_TEAMLEADER (1) Enables supervisor application in UI for

preconfigured monitors and reportsVALUE_CIE_CC_SERVUSER (2) 2 concurrent service users needed for

configuration

Packaging and order codes

February 2014 7

PLDS license DescriptionVALUE_CIE_CC_UMR Required by C3000 serverVALUE_PHX_BASE 30 LIC Allows up to 30 agents to be active and

logged in

IP Office:

ADI license DescriptionCTI Pro License Enabled third-part TAPI licenseVMPro Recording Administrators Enables Contact RecorderAvaya IP Endpoint License For CHAP connection

Also requires IP Office Preferred Edition.IP Office Contact Center Base 100 bundleIP Office Contact Center:

PLDS license DescriptionVALUE_CIE_PX_IPO (1) Single PBX connection IP OfficeVALUE_CIE_IVR_CON (1) 1 CHAP portVALUE_CIE_IVR_PORT (Channels 90) 90 channels (maximum for 32bit CHAP)VALUE_CIE_CC_CLIP 10000 addressesVALUE_CIE_CC_TEAMLEADER (1) Enables supervisor application in UI for

preconfigured monitors and reportsVALUE_CIE_CC_SERVUSER (2) 2 concurrent service users needed for

configurationVALUE_PHX_BASE 100 LIC Allows up to 100 agents to be active and

logged inVALUE_CIE_CC_UMR Required by C3000 server

IP Office: Note:

Use IP Office Manager for Server Edition to install the license for IP Office Server Editionand use IP Office Manager to install the licenses for IP 500 V2.

ADI license DescriptionCTI Pro License Enabled third-part TAPI licenseVMPro Recording Administrators Enables Contact RecorderAvaya IP Endpoint License For CHAP connection


8 February 2014

IP Office Contact Center 1 voice agent license with skills based routing and callbundleIP Office Contact Center:

PLDS license DescriptionVALUE_CIE_CC_USER_VOICE 1 license for each logged in telephony agentVALUE_CIE_CC_MONTELUSER Extended voice features, 1 license for each

logged in telephony agent

IP Office:

ADI license DescriptionPreferred Edition Additional VoiceMail Ports Needed for 100% call recording

Also requires IP Office Preferred Edition.IP Office Contact Center 1 multichannel agent license with email, chat andoutbound campaign bundleIP Office Contact Center:

PLDS license DescriptionVALUE_CIE_CC_USER_CHAT 1 license for each logged in chat agentVALUE_CIE_CC_USER_NONVOICE 1 license for each logged in email agentVALUE_CIE_CC_TEXTMODULES 1 license for each agent for email textblocks

IP Office: None.IP Office Contact Center 1 supervisor license bundleThis bundle includes the licenses in bundles 306495 and 306496 plus the following license:IP Office Contact Center:

PLDS license DescriptionVALUE_CIE_CC_SUPERVISOR 1 license for each logged in supervisor

IP Office: None.IP Office Contact Center Base 30 to Base 100 migration bundle

PLDS license DescriptionVALUE_PHX_BASE 100 LIC Allows up to 100 agents to be active and

logged in


February 2014 9

Initial setup and connectivity

Software installation checklist# Task Description Notes

1 Install the MicrosoftWindows operatingsystem.

Microsoft Windows Server 2008R2 SP1, or Windows Server 2012R2

2 Copy the installationfiles from the DVD.

Copy from IPOCC-DVD (.iso) thecomplete folder Install_Sybase tolocal folder (e.g. c:\install) onIPOCC server.

3 Install Sybase ASE. Set the system administratorpassword.

4 Install MicrosoftWindows TAPI.

Enter switch IP address andpassword.

5 Install IP OfficeContact Center

After installing the servercomponents of IPOCC, import thedata using Dataimport.exe

Related topics:Installing Microsoft Windows Server on page 10Installing Sybase Adaptive Server Enterprise on page 12Installing and configuring Microsoft Windows TAPI on page 13Installing IP Office Contact Center on page 14

Installing Microsoft Windows ServerProcedure

1. Disable Power Management functions.

Software installation checklist

10 February 2014

2. Activate daylight savings time when setting the system time to the local timezone.

3. Use TCP/IP as the network protocol.4. Define the computer name.

Only use digits and letters for the computer name. Do not use the underscorecharacter. Begin the name with a letter. The name can consist of up to 30characters.

5. Do not activate SNMP.6. Enable error reporting unless you are setting up a test system. If you are setting up

a test system, complete the following steps:a. On the Control Panel, click System.b. On the Advanced tab, click Error Reporting.c. Select Disable error reporting.d. Click OK.

7. Set up a permanent IP address.IP Office Contact Center works only with one IP address. IP Office Contact Centerdoes not support multiple IP addresses on the same NIC.

8. Create a system user and password.a. Grant the user administration privileges to start services.

You must also grant the user the rights to add scheduled tasks. The user needsthis rights to install the Sybase server.

b. For security reasons, do not use the same username and password for othercomputers on the network.

9. Ensure that the service Windows firewall is functional.

Note:If you need to use a firewall, configure the firewall settings using the appropriateports. See Port assignments.

10. In the Power Options Properties dialog box, on the Power Schemes tab, set thefollowing settings:a. Set Turn off hard disks to Never.b. Set System standby to Never.To add the server to the list of trusted sites go to Internet Explorer > InternetOptions > Security > Trusted sites: http://


February 2014 11

Installing Sybase Adaptive Server EnterpriseBefore you begin

Copy the complete folder Install_Sybase on your computer from the IPOCC-DVDor .iso.

Important:Do not change the name of the Install_Sybase folder.

Log in as the system administrator.Procedure

1. Execute the SybaseDB.exe file.The system displays the Sybase ASE Installer dialog box.

2. Select the drive for the database server.a. In the SQL server name field, accept the default setting.b. In the Password for user sa field, type the new password for the system

administrator (sa) account.The password must be a combination of numbers and letters and must be atleast eight characters long.

c. In the Confirm password field, type the new password again.d. Do not change the default values under Page size and Hardware

resources.


12 February 2014

3. Click Install.The system installs Sybase ASE in about 20 minutes. The system displays theInstallation successfully finishedmessage.

4. Click OK.5. Restart the server.

Installing and configuring Microsoft Windows TAPIProcedure

1. Navigate to the TAPI installation executable on the server.Typically, it is located at \Server\IPO TAPI\tapiSetup.exe

2. Right-click the file and click Run as administrator from the pop-up menu.The system displays Select a User Name.

Note:The system displays the default User Name and User Password.

a. Click Next.The system displays the TAPI2 InstallShield Wizard.

b. Click Next.The system displays the Select Networked Telephone System.

c. Select the IP Office control unit.The system displays the Select a User Name window, with the default UserName and User Password.

d. Click Next.The system displays the Ready to Install the Program window.

e. Click Install.The system prompts you to restart the system.

f. Click Yes.The system restarts and displays the Resuming the InstallShield Wizard forTAPI2 .

g. Click Next.The system displays the InstallShield Wizard Completed.

h. Click Finish.3. Click Start > Control Panel and select Phones and Modem.4. Select My Location and click Edit.


February 2014 13

5. In the Edit Location dialog box, type the country and area code for the customersite and click OK.

6. In the Phone and Modem dialog box, click Advanced.7. Select Avaya IPO TAPI2 Service Provider and click Configure8. In the Avaya TAPI2 configuration dialog box, enter the following settings:

a. In the Switch IP Address field, type the IP address of the IP Office server.b. In the Switch Password field, type the password of the IP Office server.

The default password of the IP Office server is password. If you have changedthe default password of the IP Office server, please type the new password thatyou typed in Security Settings > System > Unsecured Interfaces > SystemPassword.

c. Click OK.d. Click Close.

Installing IP Office Contact CenterAbout this task

Note:The system requires 26 GB of disk space to perform a complete install. All databases areautomatically set to Automatic Expansion, so the databases of IP Office Contact Center canexpand in case the system reaches the initial configured database size.

Procedure1. Install vcredist_x86_2008.exe and vcredist_x86_2010.exe .

Typically, it is located in Server\IP Office Contact Center of the installDVD.

2. Navigate to the IP Office Contact Center setup wizard on the server.Typically, it is located in Server\IP Office Contact Center of the installDVD.

3. Double click the SetupWizard.exe file.The system displays the Avaya IP Office Contact Center Setup Wizard dialogbox.

4. Click Complete.The system displays the Settings for Avaya IP Office Contact Center installationdialog box.


14 February 2014

5. Type the sa password.Type the password that you set for sa user when installing the Sybase server.The system displays the Network Adapter IP address of the server you arecurrently using.

6. Click Install.The system displays the list of components installed.


February 2014 15

7. Click Finished.8. Restart the server.

After the system restarts, Watchdog configuration runs automatically.

Next stepsSelect Start >Programs > Avaya IP Office Contact Center > Trace System > TT Displayand verify that all the all components are running.


16 February 2014

Note:Unless you install the licenses, the component SMTPConnector for Runlevel 14 and IVRservices stop automatically and turns red in TTDisplay and the Watchdog restarts theSMTPConnector for Runlevel 14 and IVR services.

Installing licensesBefore you begin Obtain the license file from the Avaya Product Licensing and Delivery System (PLDS)

website at https://plds.avaya.com.About this taskIf you experience problems while installing the license file, see the License file installationerrors section in Administering Avaya WebLM (stand-alone).

Installing licenses

February 2014 17

Procedure1. Open a browser on IPOCC Server and type https://:8443/

WebLM connect to WebLM.2. In the login page do the following:

In the User Name field, type admin. In the Password field, type weblmadmin.

The password is case sensitive.If you are logging into WebLM for the first time, the system prompts you to changethe password.Use the same password that you set as Sybase sa password.

3. In the left navigation pane, click Install license.4. On the Install license page, enter the license file path. You can also click Browse

to select the license file.5. Click Install to install the license file. WebLM displays a message upon successful

installation of the license file. The installation of the license file can fail for variousreasons, such as:

WebLM finds an invalid digital signature on the license file. If you get such anerror, request PLDS to redeliver the license file.

The current capacity use exceeds the capacity in the installed license.

Next stepsRestart the IPOCC watchdog service.

Installing licenses

18 February 2014

Configuration

Component configuration checklist# Task Description Notes

1 Import configurationdata file.

Import theDataImport.exefile.

Activate the Task Floweditor

2 Configure IP Officefor telephony.

Import theConfiguration.csv file.General systemsettingsSIP extensions

Related topics:Importing the IP Office Contact Center configuration data file on page 19

Importing the IP Office Contact Center configuration data fileBefore you begin

1. Complete all the steps in Using the Avaya IP Office Contact Center ConfigurationWorksheet on page 5.

2. Important:

Back up the cc and c3k databases. For more information, see Backing up thedatabase section of Deploying IP Office Contact Center guide.

Procedure1. Copy the DataImport.exe file to any folder on the computer where the database

is installed.2. Double click DataImport.exe.

The system displays the CCImportJobber dialog box.

February 2014 19

3. In the DB User field, type sa.4. In the Password filed, type the password you set for sa user.5. Click Import Data.

6. Click Finish.7. Restart the IPOCC watchdog service after you import.

Next stepsActivate the task flow editor.Related topics:

Activating task flow editor on page 20

Activating task flow editorBefore you beginSelect Start > Programs> Avaya IP Office Contact Center > Trace System > TT Displayand verify that all the processes are running.About this taskProcedure

1. Select Start > Programs> Avaya IP Office Contact Center > User Interface.

Component configuration checklist

20 February 2014

The system displays the Avaya IP Office Contact Center log in page.2. Type Administrator in the Username field.3. Type the password in the Password field.

The default password is Administrator.4. Click Login.

The system displays IP Office Contact Center window.5. Select Go To > Task Flow Editor.6. Click the Open icon.

The system displays Open task flow set.

7. Select Import TF-Set.8. Click OK.

The system displays the Password dialog box. You do not have to type thepassword.

9. Click OK.10. Click Activate.

The system displays Task Flow set successfully activated message.11. Click OK.12. In the Task flow set menu, click Close.13. In the Task flow set menu, click Default task flow set.

The system displays the Use default task flow set dialog box.14. Select Import TF-set and click OK

The system displays the Password dialog box. You do not have to type thepassword.

15. Click OK.

Component configuration checklist

February 2014 21

IP Office server configuration checklistConfiguring IP OfficeUse IP Office Manager to complete the following configuration tasks.


1 Import the data file. Configuration.csv2 Configure general

system settings.VoIPSIP RegisterDNS

Related topics:Importing the IP Office configuration data file on page 22Configuring IP Office on page 23

Importing the IP Office configuration data fileBefore you begin

Complete all the steps in Using the Avaya IP Office Contact Center ConfigurationWorksheet on page 5.

Note:The short codes targeted for each Topic that you create must exist and be the same for theServer Edition Secondary server and Server Edition Expansion System .

Procedure1. Copy the configuration.csv file to any folder on the computer where you have

installedIP Office Manager.2. Start IP Office Manager, and select the IP Office server.3. Click File > Import/Export > Import.4. Select Configuration .5. Navigate to the location where you copied the configuration.csv file and select

it.6. Click OK to import the file.

IP Office server configuration checklist

22 February 2014

Next stepsComplete the steps in Configuring IP Office on page 23.

Configuring IP OfficeBefore you beginComplete all the steps in Importing the IP Office configuration data file on page 22.About this taskFor more information about the configuration settings, see the IP Office Manager document.Procedure

1. Select System > LAN 1.2. In the VoIP tab, set the following values and settings:

a. Select H323 Gatekeeper Enable.b. Select SIP Trunks Enable.c. Select SIP Registrar Enable.

3. In the SIP Registrar tab, set the following values and settings:a. In the Domain Name field, enter server domain name. For example: st4

ipo1.qas. This is the local SIP registrar domain name through which SIPendpoints register with the IP Office system.The domain name must be the same domain name that you typed in Avaya IPOffice Configuration Worksheet.

b. In Layer 4 Protocol, select UDP, TCP, and TLS. Use default ports.c. Click OK.

4. Select Extension.Select the SIP extension that you created for the CHAP connection to the IPOCCserver, then click VoIP tab.

5. Select Custom from the Codec Selection drop-down list.6. List only G.711 ALAW 64K and G.711 ULAW 64k under Selected.

The system functions only if you list both G.711 ALAW 64K and G.711 ULAW64k under Selected.Move the other codecs under Unused list.

7. Click OK.8. To add the ADI licenses do the following:

a. Select License .b. Click Add.

IP Office server configuration checklist

February 2014 23

c. Type the license key in the License Key field.The system displays the type of license, the status of the license, instances,and the date of expiry.

9. Click OK.10. To send the configuration to the IP Office system, select File > Save

Configuration.11. Restart the IP Office system.12. Restart the IP Office Contact Center server.

Installing User Interface on an agent workstation# Task Notes1 Install User

Interface on anagentworkstation.

Double click Contact Center User Interface.msi in folder the\Client and install User Interface of the installDVD.

2 Login as anAgent.

1. Go to Start > Avaya IP Office Contact Center > UserInterface, to start IPOCC User Interface.

2. In the Username field, type Agent1 .You can also type Agent2 or Agent3 or the name of theagent that you have set in the IPOCC configurationworksheet.

3. In the Password field, type cc1234564. Select your extension in the Telephone Extension drop-

down list.5. Click Login

3 Testing as asupervisor.

1. Go to Start > Avaya IP Office Contact Center > UserInterface, to start IPOCC User Interface.

2. In the Username field, type Administrator .3. In the Password field, Administrator4. Click Login

To observe AG and Topic states, go to Supervision > RealtimeInformation > Predefined.

Installing User Interface on an agent workstation

24 February 2014

# Task Notes Double click Realtime Information file AG_Default and select

the Agent Group that thelogged in agent has been assigned. Double click Realtime Information file Topic_Default and

select the Topic for which you want to make test calls.4 Make test calls Dial into a topic.

If the logged in agent is free and signed on an agent group, thesystem distributes the call to the agent and in the Realtimeinformation AG_Default, the system displays agent asavailable.

If the agent is not free or not signed on, the system plays a musicand the caller listens to the music. In Realtime informationTopic_Default the call is notified.


February 2014 25

Troubleshooting

During the deployment for all troubleshooting information see, the Troubleshooting section of theDeploying IP Office Contact Center guide.

26 February 2014

Deployment processSite preparation checklistIP Office Contact Center server requirementsAgent workstation requirements

Planning checklistKey customer configuration informationUsing the IP Office Contact Center Configuration WorksheetImportant field descriptions of the configuration worksheet


Initial setup and connectivitySoftware installation checklistInstalling Microsoft Windows ServerInstalling Sybase Adaptive Server EnterpriseInstalling and configuring Microsoft Windows TAPIInstalling IP Office Contact Center

Installing licenses

ConfigurationComponent configuration checklistImporting the IP Office Contact Center configuration data fileActivating task flow editor

IP Office server configuration checklistImporting the IP Office configuration data fileConfiguring IP Office


Troubleshooting