IP-CONTROL TABLE OF CONTENT INDEX 1.Product presentation 1.OverviewOverview 2.Start-up 1. Start-up Start-up 3.Editors 1.VisualisationeditorVisualisationeditor

IP-CONTROL TABLE OF CONTENT

INDEX

1. Product presentation1. Overview

2. Start-up1. Start-up

3. Editors1. Visualisationeditor

2. Jobeditor

3. Systemtool

4. Application1. Visualisation

2. Create a project

3. Create a switch function

4. Create a camera function

5. Multiroomcontrol with IP-Control

6. IP-Control Mobile devices

7. Create a Master page

8. Create a Embedded Flip page

BERKER TRAINING IP-CONTROL RELEASE 5 107.2012

INDEX

5. Tips&Tools1. Network configuration

2. Update-Tool

3. ETS 4 Application

4. Group address import and export

IP-CONTROL

PRODUCT PRESENTATIONSTART-UPEDITORSAPPLICATIONTIPS & TOOLS

07.2012 3BERKER TRAINING IP-CONTROL RELEASE 5

IP-CONTROL OVERVIEW

Product: IP-CONTROL

Ordernumber:7571 00 04


IP-CONTROL OVERVIEW

FUNCTION OVERVIEW

Visualisation (50 different Users, maximum of 15 Users at the same time)

NEW: KNX Net-IP Access (KNX ETS commissioning over IP)

System connection over IP (Function similar a KNX-line coupler) Visualisation of network cameras


IP-CONTROL OVERVIEW

FUNCTION OVERVIEW

Automation-Jobs: Logic gates, switch on-off delay time,

staircase light function, multiplexer, comparator, math functions

Weekly timer, Yearly timer Date & time transmitter E-Mail function Scene function Hysteresis and threshold switches

The number of logic and automation jobs is not absolutely limited. Recomment not more than 200 jobs for optimal working.


IP-CONTROL OVERVIEW

FUNCTION OVERVIEW

Automation-Jobs: Job to control multiroom audio devices

(Logitech Squeezebox)

Independent visualisation for mobile

devices


07.2012 BERKER TRAINING IP-CONTROL RELEASE 5 8

IP-CONTROL OVERVIEW

IP-CONTROL NEW FIRMWARE VERSION 1.5 (R05)

New type of visualisation for tablets (e.g. iPad or Android Tablets)

Existing visualisation on IP-Control Java based visualisation in normal browser–

The “classic” IP-Control visualisation HTML based visualisation for mobile devices (IP-Control Mobile) since

Release 03


IP-CONTROL OVERVIEW

IP-CONTROL SINCE VERSION 1.4 (LATEST VERSION 1.5)

NEW: IP-CONTROL-TABLETSpecial visualisation for mobile devices with high resolution display and HTML / AJAX technoligy (e.g. iPad, Android Tablets)

IP-Control Tablet provides the possibility to take over the “normal” visualisation from IP-ControlRestriction:

Free components are not supported by IP-Control Tablet , only elements of the standard library are supported

Selectable at startup page

PRODUCT PRESENTATIONSTART-UPEDITORSAPPLICATIONTIPS & TOOLS


REQUIREMENTS OF IP-CONTROL

Network connection (network cable or network components (e.g. Switch))

KNX bus voltage

10 - 30 V DC external power supply

BERKER TRAINING IP-CONTROL RELEASE 5 11

IP-CONTROL START-UP

07.2012

IP-CONTROL START-UP

non ETS application (Visualisiation and programming on browser)

Status LED‘s Power - LED (Operating status)

BMX - LED (IP-Control kernel-mode)

KNX - LED (KNX bus)

Without function

LAN - LED (LAN activity)


IP-CONTROL START-UP

REQUIREMENTS OF IP-CONTROL

Current webbrowser (e.g. Internet Explorer, Firefox, Netzcape etc.)

JAVA Runtime Engine Version 1.6 or higher

(Download http://www.java.com Oracle)


IP-CONTROL START-UP

VERSION CHECK JAVA

the JAVA-Icon could be found on system control of Windows

Application info provides the version number (e.g. 1.6.23)


IP-CONTROL START-UP

SETTINGS ON JAVA

On tab „General“ – Temporarily Internet-Files click on „Settings“

Remove the mark „keep temporary files on my computer“


CALL UP THE IP-CONTROL IN BROWSER

Call up the „Start page“ of the IP-Control with device IP-address

IP-CONTROL START-UP


Type in IP-adress of IP-Control (e.g.: http://192.168.1.10)

IP-CONTROL START-UP

ERROR MESSAGE ON CALL UP THE „START PAGE“

Please check Correct IP-address (e.g: http://192.168.1.10)

Connection to network

IP-address of your computer is in the correct ip-address range


IP-CONTROL START-UP

VALIDATION OF IP-SETTINGS

To check the ip-settings please use Discovery Tool Discovery Tool located on IP Control CD

Discovery Tool is a Java tool and directly executable (no need of installation)


IP-CONTROL START-UP

VALIDATION OF IP-SETTINGS

Discovery Tool


Available IP-Controls green = available yellow = other network segment

IP address of the IP-Control

Open browser with IP-Control start page

07.2012

CALL UP IP-CONTROL IN BROWSER

Call up the „Start page“ using the ip-address of the device

IP-CONTROL START-UP


IP-adress of IP-Control (http://192.168.1.10)

07.2012

IP-CONTROL START-UP

POSSIBLE SECURITY WARNINGS OF OPERATING SYSTEM

Security warning of operation system on first call up

Choose „Run“ or „Don`t block again“


IP-CONTROL START-UP

STARTING THE VISUALISATION EDITOR

Choose the button „Editor“ and you will get the user authentication box


Username: admin*Password: berker*

07.2012

* delivery default settings

IP-CONTROL START-UP

VISUALISATION EDITOR

Editor is started and visualisation can be arranged


PRODUCTPRESENTATIONSTART-UPEDITORSAPPLICATIONTIPS & TOOLS


IP-CONTROL EDITORS

CHOOSING THE FUNCTION

3 different choices are available Visualisierung = starting the existing visualisation Editor = changing existing / creating new visualisations System = changing the system settings



IP-CONTROL EDITORS


The design and functions of the visualisation will be configured on editor

Configuration of the project by using the existing menu bar and visualisation elements

Setttings of background images, images and page sizes

Setup user management

Import of group adresses and images

General settings such as for e.g. IP-Control clock and display of KNX group addresses


IP-CONTROL EDITORS


Range of functions compared to previous version

Backup-dialog on end of task Visu Live Mode possible on editor Image database included on editor (image

import via drag & drop or image-transfer) Import of group addresses included on editor Free allocation of working surface

(simular to ETS4) Supporting new visualisation variants (mobile

devices)


IP-CONTROL EDITORS


Multi-part view for effective work



General functions like e.g. Save – New page – New project

IP-CONTROL EDITORS


General functions

IP-CONTROL EDITORS


Structure of projects such as e.g. project compilation – pages – master pages


Project struktur

IP-CONTROL EDITORS


Elements for functions such as e.g. Switching – dimming – value display


elements

IP-CONTROL EDITORS


Configuration of active page e.g. Size – background - colour


Parameters

IP-CONTROL EDITORS

The visualisation editor contains elements for following functions switch, push and release function

binary status

dim, blind control

value transmitter, value display

temperature indication and – adjustment

text display

time and date displays

camera integration

fault message

diagram

RSS feeds

…


IP-CONTROL EDITORS

VISUALISATION EDITOR-IMAGEPOOL

To use images in IP-Control , they have to be imported first

To import images use menu „Extras – image transfer“


IP-CONTROL EDITORS

VISUALISATION EDITOR – IMAGE POOL

Upload images


Choose image file

IP-CONTROL EDITORS

VISUALISATION EDITOR – IMAGE POOL

Upload images


Select button to upload the image

JOB EDITOR

IP-CONTROL EDITORS

JOB EDITOR

The Job editor provides you with services (jobs)

Services are created and parameterized

Jobs are tasks performed by the IP-Control

Jobs are e.g. Logic gates Light scenes Date and time elements Week timer Media control etc.


IP-CONTROL EDITORS

JOB EDITOR

Start


Start Job editor

IP-CONTROL EDITORS

JOB EDITOR

Overview


Job-Editor starten

SYSTEM TOOL

IP-CONTROL EDITORS

SYSTEM TOOL

Call up System tool


IP-CONTROL EDITORS

SETTINGS SYSTEM TOOL

Fill in IP-Control string or charcter string (e.g. Aag6F4)

Character string is located on manual and on back of the device


IP-CONTROL EDITORS


Several possibilities of settings User administration Configuration Start page Backup / restore


IP-CONTROL EDITORS


Configuration Setup network

■ IP address 192.168.1.10

■ Subnetmask.

255.255.255.0■ Default gateway for

connection to internet■ DNS Server normally the

same as default gateway■ Time server configuration to

synchronize with internet time server (Net Time Protocol)


sample of settings

IP-CONTROL EDITORS


Configuration Set up the name

„IP-Control building 1“ Set up the physical address

■ Phy. address 1.1.50


sample of settings



VISUALISATION


IP-CONTROLAPPLICATION

START THE VISUALISATION



Visu Window Visualisation starts in seperate

browser window

Visu Browser Visualisation starts in actual

browser window

IP-Control Tablet New surface optimized for tablet-

PC‘s or smartphones

IP-Control Mobile Universal surface for several

devices with different operating systems




Visu Window Visualisation starts in seperate

browser window




Visu Browser Visualisation starts in actual

browser window




IP-Control Tablet New surface optimized for tablet-

PC‘s or smartphones




IP-Control Mobile Universell surface for several

devices with different operating systems

Predefined functions with default symbols


CREATE A PROJECT

CREATE A PROJECT

1st step : Creating a new project

IP-CONTROL APPLICATION


Enter name of project

CREATE A NEW PAGE

2nd step : Create a new page



Enter name of page

CREATE A SWITCH FUNCTION


1st step : Creat a switch function



Symbol of switch function


2nd step : Creat a switch function



Configuration part of element:Possibility of positioning the object and connecting the output to a group address

Icon of switch function


3rd step : Connect to group address



To select group address double click the line



4th step : Connect to group address


Confirm


5th step : Connect to group address /check



Combined group address


6th step : Test the function in live mode



Start live modus



7th step : Test the function in live modus






CREATE A CAMERA FUNCTION


1st step : Insert camera function



Insert Camera


2nd step : Configure URL of camera



2 options of using network cameras1st variante MJPEG STREAM2nd variante static image

In the URL field, enter the full network path to the image memory of the camera, preceded by HTTP:// (e.g. HTTP://192.168.1.2/record/current.jpg)


3rd step : Enter description of camera



Description of camera(name)


4th step: Configure password



If necessary, enter user and password



IP-CONTROL ANWENDUNGEN


Start live modus









CREATE A MASTER PAGE



By using Master pages recurrent pages can be added automatically

Possible to define more Master pages

E.g. design, function and textparts could be defined




A new master page will be inserted in the structure of the project

The new Master page can be configured

Name of page could be changed Design could be changed

■ Background colour / background image

■ Functions

01.2012 BERKER SCHULUNG IP-CONTROL RELEASE 5 78



Inside configuration of normal page select the Master page

All parameters of the Master page will be integrated on this page


CREATE AN EMBEDDED FLIP PAGE

CREATE A FLIP PAGE

Flip pages are embeded Pages with scroll function ( flipping) on a page (like frames on websites)

More functions could be placed onto a sub area

It`s possible to create multible flip pages

e.g. Navigation, control functions and text areas could be defined




CREATE A FLIP PAGE

A new Flip page will be inserted in the structure of the project

The new Flip page can be configured

Name of page could be changed Design could be changed

■ Background colour / background image

■ Functions



CREATE A FLIP PAGE

Setup the size of Flip page

Setup number of segments

Setup the start segment



INTEGREATE A FLIP PAGE

Embedded on page

Setup number of segments

Setup the start segment


MULTIROOM CONTROL WITHIP-CONTROL



Classical music media like CD are increasingly substituted by MP3 files

Internet music stores and possibilities to readout CDs are used to build up central MP3 collections on servers

Manufacturers of consumer electronics offer streaming-clients, which reproduce the centrally stored music optionally in different rooms

Normally the user handles the devices through special user interfaces, which belong to the electronics



Berker has developed a special solution for multiroom audio control based on IP-Control and Logitech Squeeze Boxes

This solution provides an easy way to realise a smart multiroom environment

IP-Control is the interface between the KNX devices and the multiroom electronics



IP-Control is the interface between the KNX devices and the multiroom electronics

Zone 1 Zone 2

KNX

IP

IP

MP3collection

InternetRadio



Squeezeboxes are streaming clients for MP3 files located on the SqueezeServer or for internet radio stations.

SqeezeServer manages the MP3 files and internet radio stations in playlists.



Essential components for this solution: PC for the SqueezeServer software IP-Control R2 or higher Logitech Squeezebox per each zone Optional a B.IQ RTR per zone or another multifunctional KNX switch Optional a Master Control for the central handling or a PC for the IP-

Control visualisation For the SqueezeServer you need:

■ A plugin, which is located on the IP-Control CD or is available on the internet at Berker download area

■ Further you need a xPL hub software, which is freely available on the internet



optional


The job Squeezebox-Control (SBC) of the IP-Control provides a KNX interface for the control of Squeezeboxes. With this job KNX-devices can control Squeezeboxes with following functions:

Zone on/off, mute on/off (pause/play)

Volume control with feedback of the current volume as EIS 15 (14 bytes) ASCII text and EIS 6 (1 byte) value, e.g. „Volume 45%“ in the text display of the B.IQ RTR or as bargraph in the MC or the visualisation

Selection of playlists or titles

Display of playlist names and track names as ASCII text



With this job KNX-devices can control Squeezeboxes with following functions:

Display of additional track information like artist or album name as text in the MC or the visualisation

Display of a 4-row, scrollable view of all playlists for the directed selection of a playlist in the MC or visualisation by name

Adjustment of limitations for the volume in each zone by the visualisation or the MC



EXAMPLE FOR AN USER INTERFACE


Zone on/off (toggle)

Quieter (darker)

Playlist/Track (long/short) Playlist/Track (long/short)

Louder (brighter)

Mute on/off (toggle)

14 Byte ASCII Text



Job Name: Required entry

Gate Group Adresses: If a group address is connected, the job is only active by an "1” (1bit group adress)

SB name: The name of the squeezebox which is to be controlled (The entry must be on par with the squeezebox server entry for this squeezebox)



Absolute limit of maximum volume of the squeezebox in % (default 100)

Absolute limit of minimal volume of the squeezebox in % (default 0)

Gradual dimming of the volume specified step width (default 2)

Output of the current volume to display

Output of the current volume to display

Setting volume per value (1byte)



Switch on / off the zone (squeezebox)

Play / Pause track

Track next / previous

Forward / rewind (search in track, High Speed)

Seek width (speed….)

Playlist next / previous



Diplay message Output: Object to transmit text information on

a single-line display (rotating display)

Text bypass input: Object to fade in of further texts from

an external source of the KNX, e.g. Alarms (s.a. B. IQ info text)

Reset textdisplay: Object to reset the alarm line of text

in the B.IQ displays. When squeezebox turned off, the alarm function of the B. IQ display will be reset and the normal content of the display is again represented.



Reset invert: Setting this flag the reset of the

textdisplay will be inverted

Reset on Zone: Setting this flag will reset the text

display when squeezebox is switched off

Reset on mute: Setting this flag will reset the text

display when squeezebox is muted



Display „No Playlist“: When marked it will show „No

Playlist“ if there is no playlist defined

Display „No Title“: When marked it will show „No Title“

if there is no title defined

Time x: Time in seconds after the display set

back to the default display



Object for text output of current playlist

Object for text output of the line x in the playlist selection

Object for text output of current title

Object for text output of current album

Object for text output of current artist



Object to control the previous or next page in the playlist selection (next = 1, the next / previous 4 playlist names will be displayed)

Object to select the playlist from the playlist selection (values 0-3 for the selection of lines 1-4)



Command code : with one group address all the functions can be triggered by value (1 byte)



EXAMPLE FOR A PAGE

act. artist

act. title

act. album

Playlist

Playlist

Playlist

Playlist

Volume limit

25 50 75

75 %

ZONE

Act. Info

25 50 75

IP-CONTROLMOBILE DEVICES


IP-CONTROL MOBILE DEVICES

Functions: Direct access to the IP-Control No additional devices are necessary Integrated „user interface for mobile devices“ License cost free Smart phones


KNX

IP


Controlling a KNX – System via mobile devices:

Operation with:Smart phone

Mobile phone

PDA

Functions e.g. switching, dimming and shutter control


IP

OPERATION OF A LIGHT




OPERATION OF A SHUTTER



ADJUSTMENT OF THE SETPOINT TEMPERATURE



MULTIMEDIA CONTROL


Zone 1

KNX

IP

IP

MP3Sammlung

InternetRadio

WLAN

IP


The IP-Control mobile devices surface is to be used with a mobile browser:

http://192.168.1.10/ipcm Default user: ipcm Default password: (no

password )

Passwords can be setup in Editor Security Settings:


Security Settings


SECURITY SETTINGS

Passwords can be setup in Editor Security Settings:

1.Mark Checkbox : User


1.


SECURITY SETTINGS

2. Click New User

3. Insert a unique username


2.

3.


SECURITY SETTINGS

4. Setup Pasword

5. Mark Checkbox IP-Control Mobile


5.

4.


The visualisation is optimized for mobile devices

Visualisation looks similar on smart phone, PDA or mobile phone

Size of the visualisation depends on the resolution of the screen



Operation is performed by using pointer or touchscreen operation

E.g.: Operation on groundfloor changes the visualisation to the surface of the floor:

Livingroom Kitchen Workroom Restroom



Next step shows the visualisation livingroom



Operation of the corresponding lamp with colored status feedback

Status O = Off Status I = On



Example to adjust the setpoint temperature in a room with current temperature

Current temperature Setpoint temperature Change the temperature = Setpoint (

+ , - )



Structure of the operation:Step 1 Groundfloor

Step 2 Livingroom

Step 3 Livingroom Light Ceiling

Step 4 Funktion ( ON / OFF)

Structure is adjusted on IP-Control

Important: Only one project „IP-Control mobile devices“ can be defined on IP-Control!



After first function test, you can create a bookmark on the home screen of iPhone or iPod.



START IP-CONTROL MOBILE EDITOR


Start the editor

EDITOR - GENERAL



Insert and settings via right mouse click.

EDITOR - GENERAL



Insert new elements

Save Changes

Reload the Editor

EDITOR – ADD NEW BUILDING PARTS



Add new folder to create a new part of the building


EDITOR – ADD FUNCTION „SWITCH“


Add switch function


EDITOR – ADD FUNCTION „SWITCH“


connect to group address

Enter the description

MORE FEATURES



More Features e.g.: Camera Temperature Value Shutter List (Playlist) Dyn. Playlist MediaControl



NETWORK CONFIGURATION

IP-CONTROL TIPS & TOOLS


Settings for IP address of PC

Start – Settings – Control panel

Select network connections

LAN – Select connection with double click




Select button „Properties“




Select Internet Protocol (TCP/IP)

Click Properties




Select "Use following IP address"

Enter IP address 192.168.1.2

Subnet mask 255.255.255.0

Default gateway is not required for local commissioning

Confirm settings with OK

Note: These are examples, other addresses and address ranges are possible in practice!


UPDATE-TOOL



UPDATE-TOOL

Advantages for customers: Update-package online avaible The update can be applied on-site without the necessity of sending in Short reaction time to do an update The update-tool is self-descriptive



UPDATE-PACKAGE AND NEW FIRMWARE IP-CONTROL 1.4 (R4)

ONLY FOR IP-CONROL OLDER THAN R4

The update-package contains following parts: Update-Tool Firmware R04 Documentation R04

Since WK3 2011 IP-Control will be delivered with firmware 1.4 (R04)

The update-package is available in download area


FIRMWARE UPDATE

Using the IP-Control update tool, it is possible to flash a new firmware into the devive.

The update tool itselfs is a Java based programm, and works on several operating systems.

During this procedure, it is extremely important to read and observe the following information carefully

If the update procedure fails, IP Control might have to be returned to the manufacturer.



FIRMWARE UPDATE

IPC_UpdateTool: The Update Tool starts on clicking the .exe-file. There is no need of

installation.

fw_ipc-1.4.0 (R04): Choose firmware for IP-Control, Release 4 (updated 01-2011) to do an

update



IMPORTANT MEASURES:

First create a current backup of your project

IP Control is reset to the factory settings by an update, the project data are therefore lost.

Please note: the passwords of the visualisation users are not copied during recovery.

Please note that you can reenter these after the update procedure and project recovery.



IMPORTANT MEASURES:

For an update you need the Update Tool and the desired firmware image. This is delivered as a zip file together with a checksum file in order to check the correct transfer and avoid any errors. Both of these can be downloaded in the download area at http://www.berker.de. Both files have to be unzipped in a directory.

We strongly recommend that you carry out the firmware update only within sight of the IP Control. IP Control reproduces a status feedback via its five LEDs during the update procedure. A firmware update via one or more networks is not possible, they must be in the same physical and logical network as the IP Control.



IMPORTANT MEASURES:

If you operate your IP Control with DHCP, you should switch this off and assign IP Control a fixed IP address.

For the update you need the IP Control string and password of the user "admin".

During the firmware update, IP Control is reset to the factory settings, i.e. it retains its old IP address xxx.xxx.xxx.xxx but has been overwritten with the password "berker".

The entire update procedure lasts approximately 15 min.



PROCEDURE

If all the necessary measures have been made, please proceed as follows:

Switch off all security software and/or firewall for the update procedure since this might disturb the communication. (The communication takes place on the UDP port 1735).

Make sure of not using any other network connections during the disabling of security software and/or firewall.

Don`t forget to reactivate the security software and/or firewall after finishing the update procedure



PROCEDURE

Creating backup If you have not already done so, make a backup of the current project.

Opening update tool Open the update tool. All relevant information and tips are summarised in

the help text of the update tool.

Selecting IP Control Select the desired IP Control in the left column and enter the IP Control

string and admin password on the right.



PROCEDURE

Select the desired IP Control in the left column and enter the IP Control string and admin password on the right. If the device is in the same network, the text has a green background, if it is not in the same network, it has a yellow background. Below the display is a display of the necessary IP Control parameters. Experienced IP Control users will know this from the Discovery Tool.

If several IP Control are installed, the IP Control can be identified visually by means of the "LED Test".



PROCEDURE

In the status window below, you will be shown which actions are being executed. If the IP Control system is already installed with a rescue system, it will be restarted with this. If the device has not yet been equipped with the system, this step will first be executed.

The selected device first appears in the list of the IP Control with a blue background. If the rescue mode is active, it appears there with a green background and with a red cross. On the device itself, the power LED lights up orange at this moment, the LAN LED flashes depending on the network traffic and the BMX LED flashes red.



PROCEDURE

Selecting firmware file If the IP Control is in rescue mode, the view in the Update Tool changes

and the request to select the correct firmware file appears on the right. When opening the image file, the Update Tool checks whether the

firmware image was transferred correctly during download by means of the md5-checksum included.

The update procedure can now be started by pressing the button "Start IP Control Update". After the firmware file is loaded into the device, the IP Control is busy checking the file for approx. 5 min. Now the BMX and EIB LED flash red simultaneously.

After successful checking, the installation begins. This procedure takes approx. 5 minutes again. During this time, the three middle LEDs flash red.



PROCEDURE

IP Control should not be disconnected from the power supply under any circumstances during the entire procedure. This can cause irreparable damage to the software, the device must be returned.

Factory settings If the firmware is installed, the IP Control restarts. Afterwards, it is in the

network with the factory settings. It therefore has the IP address assigned by you xxx.xxx.xxx.xxx but the password for the user "admin" is now "berker".

Recovering backup file Load your current backup into the device. All the settings are recovered,

and the device restarts. Afterwards, it is available with all known settings but new firmware.



PROCEDURE

Please note that the backup file does not contain any information about the IP address settings. During the backup, only the port settings are saved but not the IP address settings (except for NTP timeserver)!

Recovering user administration

The user passwords must be reentered so that the user login on the Visualisation works perfectly again. Afterwards, the project must be saved once again.

During the recovery of your project file, please bear in mind that no projects from newer firmware versions may be loaded into older versions.


ETS 4 APPLICATION



IP-CONTROL AND ETS 4

There is no ETS application for the IP control, and this means that it cannot be inserted directly into the ETS project.

Insert a dummy device into the project to ensure that the physical address is reserved and so that filter tables can be correctly generated.



IP-CONTROL AND ETS 4

All group addresses must be connected to the dummy application

Important: Have a look to the data types (e.g. switch = 1 Bit)

ETS 4 automatic generates the filter tables (Couplers should be programmed when you finished your project!)

GROUP ADDRESS EXPORT AND IMPORT


IMPORT OF GROUP ADDRESSES

Start the export of group addresses



OPC SERVER EXPORT

Save the file with the name „training “



OPC SERVER EXPORT

Check if files are avaible



ARRANGE GROUP ADDRESSES IN IP-CONTROL

Import group addresses in editor




Import group addresses in editor




Choose file, the group adresses will be imported automaticly




Merge new group addresses



Choose „Open ESF File“




Select file




If deviant , select codepage




Select group addresses for import




Selected group addresses with a minus will be deleted !




Selected group addresses with a plus will be added!



IP-CONTROL

168BERKER TRAINING IP-CONTROL RELEASE 5

Documents

IP-CONTROL TABLE OF CONTENT INDEX 1.Product presentation 1.OverviewOverview 2.Start-up 1. Start-up Start-up 3.Editors 1.VisualisationeditorVisualisationeditor