IO-KILN - GreenPower Continuous charcoal kiln BIO-KILN BIO-KILN is an environmentally-friendly continuous
IO-KILN - GreenPower Continuous charcoal kiln BIO-KILN BIO-KILN is an environmentally-friendly continuous
IO-KILN - GreenPower Continuous charcoal kiln BIO-KILN BIO-KILN is an environmentally-friendly continuous
IO-KILN - GreenPower Continuous charcoal kiln BIO-KILN BIO-KILN is an environmentally-friendly continuous

IO-KILN - GreenPower Continuous charcoal kiln BIO-KILN BIO-KILN is an environmentally-friendly continuous

  • View
    10

  • Download
    0

Embed Size (px)

Text of IO-KILN - GreenPower Continuous charcoal kiln BIO-KILN BIO-KILN is an environmentally-friendly...

  • Continuous charcoal kiln BIO-KILN

    BIO-KILN is an environmentally-friendly continuous charcoal kiln with the possibility of constantly generating thermal energy from bulk waste of plant origin with the fraction of 10-50 mm and humidity less than 20%.

    Raw material for BIO-KILN various nutshells, fruit pips, wood chips, bamboo, bushes, etc.

    The followinggg adddvvvantaggges of the kiln shouuulddd bbbe mentioneddd:

    Environmental safety High efficiency and compact size High productivity (25-50 tons per month,

    depending on the raw material) Continuous 24/7 production Autonomous process (does not require manual

    operation) Generation of thermal energy Low power consumption Possibility of controlling the equipment remotely Possibility of making the process fully automated Content of fixed carbon in charcoal - 65-94%

    Equipment for processing and recycling of waste

  • BIO-KILN dddelivvvery set incccluuudddes:

    Charcoal kiln with insulation Dais with the ladder Upper hopper Lower hopper Trolleys 2 pcs. Loading conveyor Control and measuring device Chimney with deflector Stand for the kiln

    Parameter Valuuue

    Productivity, t/month 25-50

    Overall dimensions, m: length width height

    1,9 1,8 5,1

    Electricity consumption, kW/h 1

    The content of non-volatile carbon in the charcoal, % 65-94

    Kiln description

    Crushed (10-40 mm) and pre-dried raw material (with the moisture level of

  • Equipment for processing and recycling of waste

    Main elements of the continuous charcoal kiln BIO-KILN

    1. Loading hopper Raw materials for pyrolysis is loaded into the hopper. 2. Charcoal kiln Core processes take place inside the kiln: drying/pyrolysis/calcination. As the raw material moves down, it turns into charcoal. Raw material moves down the channels of raw materials. 3. Slide dampers for the charcoal unloading Used for the charcoal unloading into the hopper for the charcoal stabilization. 4. Stabilization hopper Developed for the charcoal stabilization before its unloading. 5. Trolley The charcoal is unloaded into the trolleys for the further air degassing and cooling. 6. Afterburner Pyrolysis products are burnt in the afterburner in order to provide the environmental friendlyness of the process. 7. Chimney, 8 rm It is installed on the afterburner in order to provide the kiln operation without additional fan and smoke exhauster. 8. Dais Designed for the convenience of loading of the raw materials into the hopper. 9. Auxxxiliary equipment. Additionally, the kiln can be equipped with:

    Storage hopper for raw materials Conveyor or noriya for loading of raw

    materials in the bunker of the kiln Closed and open augers for cooling

    and stabilizing charcoal The sensor of the level of raw materials

    in the kiln hopper Actuating mechanisms for opening

    dampers for coal unloading Automated control system, provide full

    automation of the process of obtaining a wood ghoul.

    Heat exchanger: gas – water, for pro- ducing hot water or other heat transfer fluid; gas – air, for getting hot air.

  • Additional elements

    Option 1

    Option 2