1

Introducing the

Deutz Oil Cooled Range

ENGINEERING EXCELLENCE – BUILT ON EXPERIENCE

Deutz Oil Cooled Range Introduction

Welcome to the new Deutz oil cooled

range, the latest addition to the

AJ Power 3 Series.

With over 150 years in the business,

Deutz are one of the world leading engine

manufacturers. The engines are

manufactured in Cologne, Germany.

The 3 Series Deutz range has four

models, AJ22, AJ33, AJ44 and AJ64.

All models are EU Stage II Emissions

compliant at 50Hz and suitable for a

variety of fuels including: jet fuels, heating

oils, 100% bio diesel and diesel.

Combining both the power and German

design of a Deutz engine, along with the

innovative generating set design from AJ

Power these models are sure to make an

impact in the market.

Model 50Hz Rating (Based on 400/230V, 0.8pf)

60Hz Rating (Based on 480/277V, 0.8pf)

Engine Model

Prime (kVA) Standby (kVA) Prime (kWe) Standby (kWe) Deutz

AJ22 20.0 22.0 19.0 21.0 F3M 2011

AJ33 30.0 33.0 28.8 31.0 F4M 2011

AJ44 42.0 44.0 39.0 40.5 BF4M 2011

AJ64 60.0 64.0 52.5 55.0 BF4M 2011C

ENGINEERING EXCELLENCE – BUILT ON EXPERIENCE

Deutz Oil Cooled Range Benefits of Oil Cooled Engines

Oil cooled engines offer many benefits.

Some of these are described below:

Oil naturally prevents corrosion of the engine. This

leads to lower maintenance requirements and

therefore lower running costs.

Oil is used as both a lubricant and a coolant in these

engines. This eliminates the needs for two separate

housing units for water and oil. Also avoid risk of

freezing or boiling of coolant.

It has been found that oil leaks are less likely in oil

cooled engines given its’ use in the machine.

The engines have a very high ambient clearance

which well exceeds 50°C. Compact cooling pack.

And finally it can also be claimed that personal

safety is also increased given that oil is a natural

electrical insulator.

ENGINEERING EXCELLENCE – BUILT ON EXPERIENCE

Deutz Oil Cooled Range Other advantages for customers

Closed crankcase breather

► The engine compartment stays clean and the environment

will be protected

Excellent mass balancing of the crankshaft

► Smooth running characteristics

► Long engine life and high reliability

All service points are accessible on one side

► Easy & quick maintenance accessibility

► Low maintenance expense

Cold starting facilities and automatical governing

► Cold start performance up to – 30°C

► High reliability even at extreme temperatures.

ENGINEERING EXCELLENCE – BUILT ON EXPERIENCE

Deutz Oil Cooled Range Technical Information - Engine Features

► 2-, 3- and 4-cylinder in-line

► 3- and 4-cylinder with optional turbocharging

► Conventional cooling system

► Oil cooled

► Black cast iron crankcase, acoustically optimized

► Cast iron cylinder head

► Direct injection

► Single injection pumps

► Camshaft toothed belt driven

► 3-Ring aluminium piston

► Piston cooling with spray nozzles

► Further developed material for the toothend belt

► Automatic Tensioner

► Toothed belt cover is made dust and water tight

► 100% extended belt change interval of up to 6000

hours.

ENGINEERING EXCELLENCE – BUILT ON EXPERIENCE

Deutz Oil Cooled Range In Conclusion

Order books are now open for the

3 Series Deutz range.

Production begins August 2016.

Datasheets with full technical details

available on request .

ENGINEERING EXCELLENCE – BUILT ON EXPERIENCE

Engineering Excellence Built on Experience