InTRAMEDULLARY nAILS

TECHnICAL SPECIfICATIOnS

TAbLE Of COnTEnTS

Intramedullary Nails Technical Specifications DePuy Synthes

Technical Specifications Overview 2

MultiLoc Humeral nail 4

Humeral nail-EX 5

Trochanteric fixation nails 6

Adolescent Lateral Entry femoral nail–EX 8

Lateral Entry femoral Recon nail–EX 9

Retrograde/Antegrade femoral nail–EX 10

Tibia nail-EX 12

Hindfoot Arthrodesis nail–EX 14

1 DePuy Synthes Trauma Intramedullary Nails Technical Specifi cations

InTRAMEDULLARY nAILS Technical Specifi cationsMultiLoc Humeral Nail Humeral Nail-EX TFN ALFN-EX

Opening Drill Bit 10.0 mm, 11.5 mm 10.0 mm 17.0 mm 13.0 mm

Instrumented EndDiameter

9.5 mm, 11.0 mm (short nail)9.5 mm (long nail)

9.0 mm and 11.0 mm 17.0 mm 11.0 mm

Shaft Diameters 8.0 mm, 9.5 mm(short nail)7.0 mm, 8.5 mm (long nails)

7.0 mm, 9.0 mm, 11.0 mm

10.0 mm, 11.0 mm, 12.0 mm, 14.0 mm

8.2 mm, 9.0 mm, 10.0 mm

Lengths 160 mm (short nail)180 mm – 315 mm (long nails)

150 mm (short nail)190 mm–320 mm (long nails)

170 mm and 235 mm300 mm – 460 mm

240 mm– 400 mm

Cannulated Yes Yes Yes Yes

CCD Angle nA nA 125˚, 130˚, 135˚ 132°, 10° Anteversion

Compression Yes Yes Yes no

Bend no 5˚ 6˚ fully curved, 12° lateral start, 2° distal bend

Radius of Curvature Straight none Short nail — straightLong nails — 1.5 m

1.0 m

Locking Screws 4.5 mm Multi Loc screws (gold)3.5 mm Screw in screw (green)4.0 mm Locking screws (Distal) (blue)

4.0 mm LockingScrews (blue)

5.0 mm (green) 5.0 mm Recon (purple)4.0 mm (blue)

Proximal Locking Options

4 proximal MultiLoc screws inmultiplanar confi guration

1 Spiral blade or Screw1 L-M screw

1-blade or Screw

Short nails have additional targeted proximal hole for 5.0 mm screw

2 Recon, 1 Transverse, 1 Antegrade

Distal Locking Options

2 L-M multiplanar screws (short nail)2 A-P, 1 L-M (long nails)

2 L-M screws (short nail)

1 A-P, 1 L-M, 1 M-L (long nails)

Short nail — 1 DynamicLong nail — 2, 1 static and 1 Dynamic

2 L-M

End Caps 0 mm, 2 mm, 5 mm, 10 mm, 15 mm

0 mm, 5 mm, 10 mm, 15 mm

0 mm, 5 mm, 10 mm, 0 mm, 5 mm, 10 mm, 15 mm

Blade no Yes Yes no

ASLS Screw brown brown Light blue brown

Reaming Rod Up to 2.5 mm Up to 2.5 mm Up to 3.0 mm Up to 3.0 mm

Intramedullary Nails Technical Specifi cations DePuy Synthes Trauma 3

LFN-EX RAFN-EX Tibia-EX HAN-EX

Opening Drill Bit 15.0 mm, 17.0 mm 13.0 mm 12.0 mm 13.0 mm

Instrumented End Diameter

13.5 mm, 16.0 mm 12.0 mm (for 9.0 mm–12.0 mm nails)

Same as nail diameter (for 13.0 mm –15 mm nails)

11.0 mm (for 8.0 mm–11.0 mm nails) Same as nail diameter (for 12.0 mm and 13 mm nails)

12.5 mm and 13.0 mm

Shaft Diameters 9.0 mm, 10.0 mm, 11.0 mm, 12.0 mm, 13.0 mm, 14.0 mm, 15.0 mm, 16.0 mm

9.0 mm, 10.0 mm, 11.0 mm, 12.0 mm, 13.0 mm, 14.0 mm, 15.0 mm

8.0 mm, 9.0 mm, 10.0 mm, 11.0 mm, 12.0 mm, 13.0 mm

10.0 mm, 12.0 mm, 13.0 mm

Lengths 300 mm – 480 mm 160 mm – 480 mm 255 mm – 435 mm 150 mm, 180 mm and 240 mm

Cannulated Yes Yes Yes Yes

CCD Angle 130°, 10° Anteversion nA nA nA

Compression no no Yes Yes

Bend fully curved, 10° lateral start

nA 10.5° 12°

Radius of Curvature 1.0 m Short nail – straight Long nails –1.5 m

nA nA

Locking Screws 6.5 mm Recon (gold) 5.0 mm (green) 6.0 mm (aqua)

5.0 mm (green) 6.0 mm (aqua)

4.0 mm (blue) 5.0 mm (green) 5.0 mm Dual Core (gold)

5.0 mm (green) 6.0 mm (aqua)

Proximal Locking Options

2 Recon, 1 Transverse, 1 Antegrade

Short nail Retrograde – 2 L-M Long nails Retrograde – 2 A-P Antegrade – 2 L-M

2 Oblique, 1, A-P, 2 M-L 2 Transverse M-L or L-M

Distal Locking Options 2 L-M, 1 Oblique Retrograde – 1 L-M and Spiral blade, or 2 L-M Antegrade- 2 L-M

2 M-L, 1 Oblique, 1 A-P

Spiral bladeSpiral blade and 1 P-A Screw2 P-A Screws1 Talus Screw

End Caps 0 mm, 5 mm, 10 mm, 15 mm, 20 mm

0 mm, 5 mm, 10 mm, 15 mm, 20 mm, 0 mm for spiral blade

0 mm, 5 mm, 10 mm, 15 mm

1 for Spiral blade1 for Locking Screws

Blade no Yes no Yes

ASLS Screw Light blue 9.0 mm –13.0 mm

Dark Purple 14.0 mm –15.0 mm

Light blue 9.0 mm –13.0 mm

Dark Purple 14.0 mm –15.0 mm

brown 8.0 mm, 9.0 mm

Light blue10.0 mm–13.0 mm

Light blue or Dark Purple

Reaming Rod Up to 3.0 mm Up to 3.0 mm Up to 3.0 mm Up to 3.0 mm

1 DePuy Synthes Trauma Intramedullary Nails Technical Specifi cations

MULTILOC HUMERAL nAILS

MultiLoc Humeral Nails, sterile• Straight, cannulated nails with right and left designs

Material• Titanium-6% Aluminium-7% niobium alloy

DiametersMultiLoc Proximal Humeral nail• 8.0 mm (proximal diameter 9.5 mm)• 9.5 mm (proximal diameter 11.0 mm)

MultiLoc Humeral nail• 7.0 mm (proximal diameter 9.5 mm)• 8.5 mm (proximal diameter 9.5 mm)

Color • blue

Cross section• Round

44 mm

29 mm

14 mm

0 mm

0 mm

12 mm17.5 mm

23 mm28.5 mm

46 mm

85 mm

105 mm

160 mm

Intramedullary Nails Technical Specifi cations DePuy Synthes Trauma 5

Humeral Nail–EX• Universal design for the left or right humerus

Material• Titanium-6% Aluminum-7% niobium alloy

Diameters • 7.0 mm, 9.0 mm (with a 9.0 mm proximal diameter)• 11.0 mm (with an 11.0 mm proximal diameter)

Color• blue

Lengths• 190 mm to 320 mm in 10 mm increments (Humeral nail)• 150 mm (Proximal Humeral nail)

Cross Section• Round

5° nail bend

0 mm

Locking hole locations

19 mm

34 mm

29 mm

44 mm

0 mm

14 mm

0 mm

Locking hole locations

19 mm

34 mm

90 mm

76 mm

150 mm

HUMERAL nAIL–EX

6 DePuy Synthes Trauma Intramedullary Nails Technical Specifi cations

TROCHAnTERIC fIXATIOn nAILS—SHORT

Trochanteric Fixation Nails—Short10 mm–12 mm Nails 170 mm and 235 mm lengths

Material• Titanium-6% Aluminum-

7% niobium alloy

Angles• 125°• 130°• 135°

Features of the short (170 mm and 235 mm) nails• Proximal diameter of 17 mm• Anatomic 6° lateral angle• Distal diameters of 10 mm, 11 mm,

12 mm• Preassembled locking mechanism

for controlling blade and screw rotation and amount of blade and screw travel

• blade and screw static interlocking• Universal design for left and

right femurs

Distal locking slot accepts 4.9 mm locking bolts or 5.0 mm locking screws

s

97.5 mm

235 mm nail

0 mm

s

Distal locking slot accepts 4.9 mm locking bolts or 5.0 mm locking screws

s

32.5 mm

170 mm nail

0 mm

s

Intramedullary Nails Technical Specifi cations DePuy Synthes Trauma 7

TROCHAnTERIC fIXATIOn nAILS—LOng

Trochanteric Fixation Nails—Long10 mm–14 mm Nails 300 mm–460 mm lengths (20 mm increments)

Material• Titanium-6% Aluminum-

7% niobium alloy

Angles• 125°• 130°*• 135°

Features of the long (300 mm–460 mm) nails• Proximal diameter of 17 mm• Anatomic 6° lateral angle• Distal diameters of 10 mm, 11 mm,

12 mm and 14 mm• Preassembled locking mechanism

for controlling blade and screw rotation and amount of blade and screw travel

• blade and screw static interlocking• Anatomic 1.5 m radius of curvature• Static or dynamic distal interlocking

with controlled dynamization of 10 mm

• Anatomic 10° anteversion• nail designs for both left and

right femurs

Distal locking holes accept 4.9 mm locking bolts or 5.0 mm locking screws

Dynamic

Static

20 mm

30 mm

50 mm

0 mm

s

s

*14 mm diameter nails are available in 130° only

8 DePuy Synthes Trauma Intramedullary Nails Technical Specifi cations

ADOLESCEnT LATERAL EnTRY fEMORAL nAIL–EX

Adolescent Lateral Entry Femoral Nail–EX• Available for left or right femur• Anatomic nail design based on a femoral

canal tracing study1

Material• Titanium-6% Aluminum-7% niobium alloy

Diameters• 8.2 mm, cannulated• 9.0 mm, cannulated• 10.0 mm, cannulated

Lengths• 240 mm through 400 mm in 20 mm increments

Cross Section• Helical fluted

Proximal locking• Dynamization slot (LM)• Static transverse locking hole (LM)• 120° antegrade locking• Two recon locking holes

Distal locking• Two transverse locking holes (LM)

1. L. Ehmke, et al.

12 mm

42 mm

LM

LM

36.25 mm50 mm

7 mm

20.6 mm

12.5 mmRecon locking

Static transverse

Dynamic transverse

120° antegrade

Intramedullary Nails Technical Specifi cations DePuy Synthes Trauma 9

LATERAL EnTRY fEMORAL RECOn nAIL–EX

Lateral Entry Femoral Recon Nail–EX• Available for left or right femur• Anatomic nail design based on a femoral

canal tracing study1

Material• Titanium-6% Aluminum-7% niobium alloy

Diameters• 9.0 mm to 16.0 mm, cannulated• 9.0 mm through 12.0 mm nails—

13.5 mm proximal diameter • 13.0 mm through 16.0 mm nails—

16.0 mm proximal diameter

Colors• 9.0 mm through 13.0 mm (light green)• 14.0 mm through 16.0 mm (aqua)

Lengths• 300 mm through 480 mm in

20 mm increments

Cross Section• 9.0 mm through 16.0 mm diameter nails—

helical fluted

Proximal Locking• Two recon locking holes (130° neck/shaft angle)• Dynamization slot (LM)• Static transverse locking hole (LM)• 120° antegrade locking hole

1. L.Ehmke, et al.

47 mm60.6 mm

7 mm

20.6 mm

Recon locking

Static transverseDynamic transverse

120° antegrade

12 mm42 mm

27 mm

LM

Oblique

LM

13 mm

Nail diameter Locking screws Protection sleeve Drill sleeve Trocar Calibrated drill bit

9.0 mm– 5.0 mm 12.0 mm/8.0 mm 8.0 mm/ 4.2 mm 4.2 mm 4.2 mm 13.0 mm (green) (03.010.063) (03.010.065) (03.010.070) (03.010.061) (green)

14.0 mm– 6.0 mm 12.0 mm/8.0 mm 8.0 mm/5.0 mm 5.0 mm 5.0 mm 16.0 mm (aqua) (03.010.063) (03.010.066) (03.010.071) (03.010.062) (aqua)

Distal Locking• Two transverse locking

holes (LM)• One oblique locking hole

(LM)

11 DePuy Synthes Trauma Intramedullary Nails Technical Specifi cations

RETROgRADE/AnTEgRADE fEMORAL nAIL–EX

Nail length A B

160 mm 18 mm 42 mm

180 mm 14 mm 38 mm

200 mm 10 mm 34 mm

Retrograde Nails Retrograde/Antegrade Nails

0 mm

35 mm

21 mm13 mm

0 mm

34 mm

Spiral bladeLocking screw

See Table (A)

See Table (b)

0 mm

17 mm22 mm

46 mm

5 mm

Retrograde nails160 mm, 180 mm, and 200 mm

Retrograde nails220 mm to 280 mm

0 mm

58 mm

29 mm34 mm

5 mm

65 mm60 mm

21 mm

35 mm

13 mm

0 mm

17 mm

0 mm

46 mm

Spiral bladeLocking screw

5 mm

Intramedullary Nails Technical Specifi cations DePuy Synthes Trauma 11

Nail diameter Locking screws Protection sleeve Drill sleeve Trocar Calibrated drill bit

9.0 mm–13.0 mm 5.0 mm 12.0 mm/8.0 mm 8.0 mm/4.2 mm 4.2 mm 4.2 mm (green) (green) (03.010.063) (03.010.065) (03.010.070) (03.010.061)

14.0 mm and 6.0 mm 12.0 mm/8.0 mm 8.0 mm/5.0 mm 5.0 mm 5.0 mm 15.0 mm (aqua) (03.010.063) (03.010.066) (03.010.071) (03.010.062) (aqua)

Retrograde Femoral Nails–EX

Retrograde/Antegrade Femoral Nails–EX• Universal design for the left or right femur

Material• Titanium-6% Aluminum-7% niobium alloy

Diameters9 mm–15 mm (1 mm increments)• 9 mm–11 mm are 12 mm in diameter

at instrumented end• 12 mm–15 mm have an instrumented

end diameter consistent with the shaft

Colors• 9 mm–13 mm (green) use 5.0 mm

titanium locking screws (green)• 14 mm–15 mm (aqua) use 6.0 mm

titanium locking screws (aqua)

LengthsRetrograde femoral nails–EX• 160 mm–280 mm (20 mm increments)

Retrograde/Antegrade femoral nails–EX• 300 mm–480 mm (20 mm increments)

Cross Section• 9 mm–10 mm nails are round• 11 mm–15 mm nails are fluted

11 DePuy Synthes Trauma Intramedullary Nails Technical Specifi cations

TIbIAL nAILS–EX

Tibial Nails–EXUniversal design for the left or right tibia

Material Titanium-6% aluminum-7% niobium alloy

Diameters8 mm–13 mm (1 mm increments)• 8 mm–10 mm nails have a proximal

diameter of 11 mm• 11 mm–13 mm nails have a proximal

diameter consistent with the shaft diameter

Colors• 8 mm and 9 mm (blue) use 4.0 mm

titanium locking screws (blue)• 10 mm–13 mm (green) use 5.0 mm

titanium locking screws (green)

Lengths255 mm– 435 mm (15 mm increments)

Cross Section• 8 mm–10 mm nails are round• 11 mm–13 mm nails are fluted

36 mm

7 mm

37 mm

ML

ML

13 mm

57 mm

Stat 1

Stat 2

Dynamic

Start of bendis 75 mm

10.5º

End of bendis half lengthof nail

Radius varies

5 mm

22 mm

AP

Oblique

14 mm20 mm

30 mm

Distal Oblique

Proximal Oblique

AP

Intramedullary Nails Technical Specifi cations DePuy Synthes Trauma 13

TIbIAL nAILS–EX WITH PROXIMAL bEnD

14 mm20 mm

Distal Oblique

Proximal Oblique

AP

5 mm

22 mm

AP

Oblique

30 mm

36 mm

7 mmStat 2

Dynamic

Stat 1

57 mm

10.5º

37 mm

ML

ML

13 mm

Start of 3º tip bend is 57 mm

R 100

Start of bendis 65 mm

Tibial Nails–EX with Proximal BendUniversal design for the left or right tibia

Material Titanium-6% aluminum-7% niobium alloy

Diameters8 mm–13 mm (1 mm increments)• 8 mm–10 mm nails have a proximal

diameter of 11 mm• 11 mm–13 mm nails have a proximal

diameter consistent with the shaft diameter

Colors• 8 mm and 9 mm (blue) use 4.0 mm

titanium locking screws (blue)• 10 mm–13 mm (green) use 5.0 mm

titanium locking screws (green)

Lengths255 mm– 435 mm (15 mm increments)

Cross Section• 8 mm–10 mm nails are round• 11 mm–13 mm nails are fluted

11 DePuy Synthes Trauma Intramedullary Nails Technical Specifi cations

HInDfOOT ARTHRODESIS nAIL–EX

Hindfoot Arthrodesis Nail–EX • Right and left designs• Cannulated for use over

all Synthes 2.5 mm/3.0 mm ball-tipped reaming rods

Material• Titanium-6% Aluminum-7%

niobium alloy

Diameters10 mm, 12 mm, and 13 mm • 10 mm and 12 mm nails have

a 12.5 mm distal diameter• 13 mm nails have a 13 mm

distal diameter

Color• Light green

Lengths• 150 mm, 180 mm, and

240 mm

Cross section• 10 mm nails are round• 12 mm and 13 mm nails

are fluted• 240 mm length nails have

a 9 mm proximal diameter

Proximal locking• fully targeted from lateral

or medial side• Dynamization slot

(5.0 mm locking screw)• Static transverse locking hole

(5.0 mm locking screw)

Distal locking• Static oblique locking

(5.0 mm locking screw)• Static transverse locking

(6.0 mm locking screw)• Spiral blade slot (spiral blade

or 6.0 mm locking screw)

40 mm

9 mm dia.

133.5 mm126.5 mm

100 mm

11.5 mm

160 mm

22.5 mm

Synthes (Canada) Ltd. 2566 Meadowpine Boulevard Mississauga, Ontario L5N 6P9 Telephone: (905) 567-0440 To order: (800) 668-1119 Fax: (905) 567-3185

Synthes (USA)1302 Wrights Lane EastWest Chester, PA 19380 Telephone: (610) 719-5000 To order: (800) 523-0322

www.depuysynthes.com

© DePuy Synthes Trauma, a division of DOI 2013. All rights reserved.J11977-C 1/14