2
ENGINEERING MEMBERSHIPS SOME HAPPY CUSTOMERS ON-SITE AND/OR CUSTOMISED TRAINING SOLUTIONS Looking for on-site training or customised solutions to better meet your needs? All our programs are available for on-site delivery and all can be customised or new programs can be developed. There are many benefits to conducting training at your own site: Lower costs per participant Ability to customise to your needs Ability to teach equipment-specific standards Privacy from other companies or competitors Convenience in scheduling YOU MIGHT PREFER SAFE OPERATIONS PERFORMANCE TRAINING Supervisor Leadership Development HazIQ - Hazard Identification and Planning High5 - Hand Prevention PREDICT - Dynamic Risk Assessment SHEQ 24/7 - The right side of Safety Job Planning (JSA & PTW) COACHING & CONSULTING Safe Operations Performance Improvement Solutions Safety Culture Diagnostics Safety Coaching Team & Leader development Change Management DRILLING TECHNOLOGY IADC/IWCF Well Control Drilling Practices HPHT IADC Rig Pass Basic Drilling Overview Stuck Pipe Marine Licensing Marine Stability Training Intertek Consulting & Training P: +27 11 0288551 E: [email protected] www.intertek.com/performance-consulting-training ENGINEERING SAFETY AND COMPETENCE

Intertek 2014 10 Engineering Brochure

  • Upload
    amin32

  • View
    5

  • Download
    2

Embed Size (px)

DESCRIPTION

Intertek

Citation preview

  • ENGINEERING

    MEMBERSHIPS

    SOME HAPPY CUSTOMERS ON-SITE AND/OR CUSTOMISED

    TRAINING SOLUTIONS

    Looking for on-site training or customised solutions to better meet your needs?

    All our programs are available for on-site delivery and all can be customised or new programs can be developed. There are many benefits to conducting training at your own site:

    Lower costs per participant

    Ability to customise to your needs

    Ability to teach equipment-specific standards

    Privacy from other companies or competitors

    Convenience in scheduling

    YOU MIGHT PREFER

    SAFE OPERATIONS PERFORMANCE TRAINING

    Supervisor Leadership Development

    HazIQ - Hazard Identification and Planning

    High5 - Hand Prevention

    PREDICT - Dynamic Risk Assessment

    SHEQ 24/7 - The right side of Safety

    Job Planning (JSA & PTW)

    COACHING & CONSULTING

    Safe Operations Performance Improvement Solutions

    Safety Culture Diagnostics

    Safety Coaching

    Team & Leader development

    Change Management

    DRILLING TECHNOLOGY

    IADC/IWCF Well Control

    Drilling Practices

    HPHT

    IADC Rig Pass

    Basic Drilling Overview

    Stuck Pipe

    Marine Licensing

    Marine Stability Training

    Intertek Consulting & Training

    P: +27 11 0288551

    E: [email protected]

    www.intertek.com/performance-consulting-training

    EN

    GIN

    EE

    RIN

    G S

    AF

    ET

    Y A

    ND

    CO

    MP

    ET

    EN

    CE

  • API 510, 570 & 653 PREPARATION ONLINE

    TRAINING

    Intertek Consulting & Training in Partnership with CKRC Training Solutions are exited to announce that we are now providing API 510, 570 & 653 inspector exam preparation courses. The courses are delivered through our unique blended learning approach using both online study with instructor led facilitation. The courses are designed to maximise API Inspector examina-tions first time success while minimising the impact that exam preparation will have on your working schedule. API Examinations are recognised worldwide and may be ar-ranged practically anywhere in the world provided sufficient participants are available and sufficient lead time is provided before the desired examination date, we are available to pro-vide assistance in securing you special site.

    API 510 Pressure Vessel Inspectors The American Petroleum Institutes authorised Pressure Vessel Inspectors must have a broad knowledge base relating to maintenance, inspection, repair, and alteration of pressure vessels. The API Pressure Vessel Inspector Certification ex-amination is designed to determine if applicants have such knowledge. API 510 certification is valid for 3 years.

    API 570 Piping Inspectors The American Petroleum Institutes authorised Pressure Vessel Inspectors must have a broad knowledge base relating to maintenance, inspection, repair, of in-service metallic piping systems. The API Piping Inspector Certification examination is designed to determine if applicants have such knowledge. API 570 certification is valid for 3 years.

    API 653 Above Ground Storage Inspectors The American Petroleum Institutes initiated and Above Ground Storage Tank Inspector certification with the issuance of sup-plement 1 to API 653, Tank Inspections, repair, alteration, and reconstruction. The program was developed with the participa-tion of storage tank owner/users, and establishes a uniform national program that will assist state and local government in above storage tank regulations. API 653 certification is valid for 3 years.

    REGULATIONS

    Pressure Equipment Regulations

    Organisations have the duty to provide a safe workplace and

    safe working equipment to all their employees. If pressure

    equipment fails in use, it can seriously injure or kill people

    nearby and can cause serious damage to the property. In order

    to avoid such risk, the Department of Labour has implemented

    new regulations to ensure that health and safety regulations are

    met for the prevention of any unintentional accidents.

    BIOGRAPHY OF THE FACILITATOR

    Paulo Pereira has been in-volved in the inspection industry

    since 1982. With a Mechanical

    Engineering background he

    completed an MBA in 2000

    through North West University.

    Paulo was the Inspection Man-

    ager for Sasol Plants in Sasol-

    burg for 26 years.

    Currently he is the Regional

    Director of Intertek Industry Ser-

    vices for Sub Saharan Africa and Chairman of the Association

    of inspection Authorities. Additionally he is a Member of the

    Department of Labour PER Forum, the SANS 347 and 10227

    Technical Committees, and a SANAS Lead and Technical As-

    sessor, as well as Chairman of the SANAS Technical Commit-

    tee for Inspection Bodies.

    AREAS OF EXPERTISE: Mechanical Engineering

    Advanced ASME Codes

    Pressure Vessel Inspections

    SANAS Technical Assessor

    SANAS Lead Assessor

    SANAS Technical Committee for Inspection Bodies

    DOL Approved Presenter for PER and SANS 347 Regulations

    Technical Inspection Services

    Business Assurance

    Partnership in Excellence

    BIOGRAPHY OF THE FACILITATOR

    Kevin Maley is our subject matter expert and active

    petrochemical, nuclear, boiler inspector, he has 15 years

    experience as an inspector and trainer and most im-

    portantly he is certified in all of the fields related to the

    material being prepared. He has a unique ability to teach

    this material from a practical and almost laymans point

    of view to the most technical point of view, this allows

    him to communicate our product and align its content to

    a great variety of personalities, and allowing each to

    appreciate and benefit from our product.

    Kevin currently holds qualifications

    for API510, 570, 653, 571 & 580.

    CAN WE ASSIST? For more information and/or to receive our Training Schedule

    Please send an email to [email protected]