Click here to load reader
Upload
hoangxuyen
View
249
Download
1
Embed Size (px)
Citation preview
INTELLIGENT TEMPERATURE SENSORS
2 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com
TURCK – THE FIRST ADDRESS FOR INDUSTRIAL AUTOMATION
TURCK products guarantee the effi ciency and cost effectiveness of industrial systems world-wide through well-directed application engineering and effective consultation with competent employees.
TURCK utilizes the opportunities posed by globalisation. TURCK is in a position at any time to adapt world-wide to the conditions which are prevalent on the local markets with its manufacturing facilities in Germany, Switzerland, the USA, Mexico and China.
TURCK is one of the leading global company groups in the fi eld of industrial automation. The company has consist-ently utilized its origins as a pioneer and trendsetter in the fi eld of sensor tech-nology and has continuously developed new, holistic solutions for the most varied of automation tasks. TURCK today provides a unique product range for the entire fi eld of industrial automation as a full-range supplier for IP67 components, which range from the I/O levels and extend to the interface to the control.
The TURCK group was founded in 1965. Today it has more than 2,300 employees in Germany as well as in subsidiaries located in 22 countries. Exclusive representatives in a further 53 countries also support world-wide sales and service. The main focus of the activities concentrates on the optimization of manufacturing processes. Close cooperation with the customers is decisive for the success of the company.
System partner with a guarantee for the future
The TURCK philosophy is just as simple as it is sophisticated: We always want to provide the very best for our customers – quickly, fl exibly and reliably! We apply this principle on a daily basis to guarantee the effi ciency, quality and safety of industrial systems world-wide.
We do not rest on our laurels and prove this fact with continuous development of innovative products and solutions, from which our customers and partners will continue to benefi t from in the future.
3 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com 3 /0406Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com
THE PERFECT SOLUTION FOR YOUR APPLICATION
Error free operation
The Enter button has been recessed in order to avoid unintentional modifi ca-tion of the data stored in the sensor. The button can only be pressed using a pointed object (e.g. a ballpoint pen).
The detection of temperature is one of the most important tasks in the processing and manufacturing industries. In addition to known factors such as accuracy or repeatability, the interfaces to the process and to the operator are also very impor-tant criteria. The new TS400 and TS500 series temperature sensors from TURCK set new standards in this area.
Highest levels of operating comfortIn addition to the two buttons for quick menu scrolling, the new generation also provides a recessed button for saving changed and modifi ed values.
Highest levels of fl exibility with mountingA rotating sensor body with a tilted display which can be rotated by 180° using software, provides all the installa-tion options.
Highest levels of precision0.2 K with the temperature sensor enables a very large spectrum of applica-tions with just a few variants.
Highest levels of system reliabilityThe robust design with a stainless steel housing and the high level of EMC immunity and IP67 degree of protection assure the highest levels of operational safety.
4 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com4 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com
A MATCH FOR THE HIGHEST OPERATIONAL SAFETY DEMANDS
The new temperature sensors of the TS400/500 provide a formidable level of operational safety even in harsh manufacturing environments due to their robust stainless steel housings, the high level of EMC immunity and IP67 degree of protection.
High system availability• High immunity to interference due to a high level of EMC
• The robust stainless steel housing prevents damage due to harsh mechanical infl uences
• The IP67 degree of protection provides safety even under extreme operating conditions
• Minimum maintenance due to optimised exposure to temperature
High levels of service-friendlinessThe sensors offer decisive calculable benefi ts owing to their extremely fl exible mounting options, user-friendliness and the high degrees of accuracy:
• Upper sensor section can be rotated by 320° with the TS500 variant
• Minimum maintenance due to reduced number of types
• Simple programming using two fi nger operated buttons
• Avoidance of unintentional operating errors by recessed button for saving parameters
5 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com 5 /0406Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com
HIGHEST LEVEL OF FLEXIBILITY WITH FEW VARIANTS
Effi cient standardisationGood news, that several conventional sensors can be replaced with a single sensor. Streamlining the product range pays off.
Your benefi ts:• Very large range of applications with just a few sensor variants
• Reduced training requirements due to simple and reliable operating features
• High level of system reliability due to a robust design
• 4-pin standard M12 connector to sensor and processor unit
Maximum degree of freedomThe new temperature sensor has a whole range of application possibilities due to its high level of fl exibility. Almost all demands can be covered with just a few devices. This provides a maximum of planning fl exibility with a minimum of mounting effort and expense.
• Rotation of the upper sensor section by 320°
• Display can be rotated by 180°
• Display angle 45°
• The display is clearly visible at extended distances due to the large, bright LED display
• Highest accuracy with 0.2 K
• Versions with two switching outputs or one programmable combination of switching and analogue output
Rotatable display
Horizontal installation is also possible. The display can be rotated by 180° using software and is thus clearly visible in every installation situation.
6 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com
Compact probe
Connecting cable
Special probe Cable probe
Compression fi tting
PROCESS
PROCESS INT
SENSOR
EVALUATION
TEMPERATURE SENSORS TS400/TS500 – HIGHEST LEVEL OF FLEXIBILITY FOR EVERY APPLICATION
7 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com
Standard probe
Stabilizer
Temperature sensor TS400/500
e
Compression fi tting
Standardthermowell
e
TEGRATION
Special thermowell
8 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com
TYPE CODEThe TURCK type code leaves no questions unanswered in the definition of the required stock item. All variants are specified simply and clearly.
TS 400 2U- - -P 8 X H1141
TS 400 LI- -- U P 8 X H1141
Temperature sensor – 1 switching and 1 analogue output
Connection
H1141 4-pin M12 connector
with LED display
Operational voltage8 15...30 VDC
Output logicP pnp transistor switching outputN npn transistor switching output
Temperaturesensor
Housing design400 adjustable, with display, non-rotatable 500 adjustable, with display, rotatable
Switching output2U 2 × programmable NO/NC mode
Temperaturesensor
Housing design400 adjustable, with display, non-rotatable 500 adjustable, with display, rotatable
Analogue outputLI Current analogue outputLU Voltage analogue output
8 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com
ConnectionH1141 4-pin M12 connector
with LED display
Operational voltage8 18...30 VDC
Output logicP pnp transistor switching outputN npn transistor switching output
Switching outputU 1 × programmable NO/NC mode
Temperature sensor – 2 switching outputs
9 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com 9 /0406Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com
TS 400 LI- - -8 X H1141
Temperature sensor – 1 switching output and 1 multiselect output (programmable)
2U PNConnection
H1141 4-pin M12 connector
with LED display
Operational voltage
8 18...30 VDC
Output logicPN pnp/npn configurable transistor switching output
TP 03A- --1 H1141
Temperature probe
Temperatureprobe
Probe type1 probe with process connection2 probe for compression fitting or thermowell3 cable sensor
Probe diameter03A 3 mm04A 4 mm06A 6 mm
G1/8 - L013-Insertion depth
ConnectionH1141 4-pin M12 connector
Process connectionG1/8 G1/8“ male threadTRI3/4 3/4“ Tri-ClampDN25K DN25 hygienic fitting DIN11851CF Compression fitting
Temperaturesensor
Housing design400 adjustable, with display, non-rotatable 500 adjustable, with display, rotatable
Analogue outputLI Current analogue outputLU Voltage analogue output
Switching output2U 2 × programmable NO/NC mode
10 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com10 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com
TEMPERATURE SENSOR TS400/500
Dimensional drawing Type Temperature range remote direct TS-400-2UP8X-H1141 -50…500 °C -50…150 °C TS-400-LIUP8X-H1141 -50…500 °C -50…150 °C
TS-400-LUUP8X-H1141 -50…500 °C -50…150 °C TS-400-2UN8X-H1141 -50…500 °C -50…150 °C TS-400-LIUN8X-H1141 -50…500 °C -50…150 °C TS-400-LUUN8X-H1141 -50…500 °C -50…150 °C TS-400-LI2UPN8X-H1141 -50…500 °C -50…150 °C TS-400-LUUPN8X-H1141 -50…500 °C -50…150°C TS-500-2UP8X-H1141 -50…500 °C -50…150 °C TS-500-LIUP8X-H1141 -50…500 °C -50…150 °C TS-500-LUUP8X-H1141 -50…500 °C -50…150 °C TS-500-2UN8X-H1141 -50…500 °C -50…150 °C TS-500-LIUN8X-H1141 -50…500 °C -50…150 °C TS-500-LUUN8X-H1141 -50…500 °C -50…150 °C TS-500-LI2UPN8X-H1141 -50…500 °C -50…150 °C TS-500-LUUPN8X-H1141 -50…500 °C -50…150 °C
11 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com 11 /0406Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com
Description Material Ident-No.
Fixed processor unit for Pt100 in 2 and 4-wire technology, AISI 316L/1.4404 68400012 switching outputs PNP Fixed processor unit for Pt100 in 2 and 4-wire technology, AISI 316L/1.4404 68400021 switching output PNP, 1 analogue output (mA) Fixed processor unit for Pt100 in 2 and 4-wire technology, AISI 316L/1.4404 68400031 switching output PNP, 1 analogue output (V) Fixed processor unit for Pt100 in 2 and 4-wire technology, AISI 316L/1.4404 68400042 switching outputs NPN Fixed processor unit for Pt100 in 2 and 4-wire technology, AISI 316L/1.4404 68400051 switching output NPN, 1 analogue output (mA) Fixed processor unit for Pt100 in 2 and 4-wire technology, AISI 316L/1.4404 68400061 switching output NPN, 1 analogue output (V) Fixed processor unit for Pt100 in 2 and 4-wire technology, AISI 316L/1.4404 68400072 programmable outputs in function and logic Fixed processor unit for Pt100 in 2 and 4-wire technology, AISI 316L/1.4404 68400082 programmable outputs in function and logic Rotatable processor unit for Pt100 in 2 and 4-wire technology, AISI 316L/1.4404 68400092 switching outputs PNP Rotatable processor unit for Pt100 in 2 and 4-wire technology, AISI 316L/1.4404 68400101 switching output PNP, 1 analogue output (mA) Rotatable processor unit for Pt100 in 2 and 4-wire technology, AISI 316L/1.4404 68400111 switching output PNP, 1 analogue output (V) Rotatable processor unit for Pt100 in 2 and 4-wire technology, AISI 316L/1.4404 68400122 switching outputs NPN Rotatable processor unit for Pt100 in 2 and 4-wire technology, AISI 316L/1.4404 68400131 switching output NPN, 1 analogue output (mA) Rotatable processor unit for Pt100 in 2 and 4-wire technology, AISI 316L/1.4404 68400141 switching output NPN, 1 analogue output (V) Rotatable processor unit for Pt100 in 2 and 4-wire technology, AISI 316L/1.4404 68400152 programmable outputs in function and logic Rotatable processor unit for Pt100 in 2 and 4-wire technology, AISI 316L/1.4404 68400162 programmable outputs in function and logic P
refe
rred
Typ
es
Simple mounting
After the sensor is mounted the actual processor unit is attached and fi xed using a coupling nut. The sensor can still be rotated and aligned in all directions here.
12 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com12 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264
TEMPERATURE PROBES
Dimensional drawing Type Temperature range TP-103A-G1/8-H1141-L013 -50…120 °C TP-103A-G1/8-H1141-L024 -50…120 °C TP-104A-TRI3/4-H1141-L035 -50…120 °C TP-104A-TRI3/4-H1141-L100 -50…120 °C TP-104A-DN25K-H1141-L035 -50…120 °C TP-104A-DN25K-H1141-L100 -50…120 °C TP-203A-CF-H1141-L100 -30…350 °C TP-203A-CF-H1141-L150 -30…350 °C TP-203A-CF-H1141-L200 -30…350 °C TP-203A-CF-H1141-L250 -30…350 °C TP-203A-CF-H1141-L300 -30…350 °C TP-206A-CF-H1141-L100 -30…350 °C TP-206A-CF-H1141-L150 -30…350 °C TP-206A-CF-H1141-L200 -30…350 °C TP-206A-CF-H1141-L300 -30…350 °C TP-306A-CF-H1141-L1000 -50…105 °C TP-306A-CF-H1141-L2000 -50…105 °C TP-306A-CF-H1141-L5000 -50…105 °C
13 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com 13 /0406Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com
High degree of protection
The TS400/TS500 temperature sensors feature IP67 degree of protection in order to comply with the high demands of machine engineering.
Description Material Ident-No. Temperature probe Pt100 Class A, Ø conical 3.5 to 3.1 mm, Nylon/AISI 316L/1.4404 9910400process connection G1/8" male thread, insertion depth 13 mmTemperature probe Pt100 Class A, Ø conical 3.5 to 3.1 mm, Nylon/AISI 316L/1.4404 9910401process connection G1/8" male thread, insertion depth 24 mmTemperature probe Pt100 Class A, Ø 8 mm with 4 mm Nylon/AISI 316L/1.4404 9910429probe tip, process connection 3/4" Tri-Clamp flange, insertion depth 35 mm Temperature probe Pt100 Class A, Ø 8 mm with 4 mm Nylon/AISI 316L/1.4404 9910430probe tip, process connection 3/4" Tri-Clamp flange, insertion depth 100 mmTemperature probe Pt100 Class A, Ø 8 mm with 4 mm probe tip, Nylon/AISI 316L/1.4404 9910431process connection DN25 to DIN 11851 (hygienic fitting), insertion depth 35 mmTemperature probe Pt100 Class A, Ø 8 mm with 4 mm probe tip, Nylon/AISI 316L/1.4404 9910432process connection DN25 to DIN 11851 (hygienic fitting), insertion depth 100 mmTemperature probe Pt100 Class A, Ø 3 mm/length 100 mm Nylon/AISI 316L/1.4404 9910402Temperature probe Pt100 Class A, Ø 3 mm/length 150 mm Nylon/AISI 316L/1.4404 9910403Temperature probe Pt100 Class A, Ø 3 mm/length 200 mm Nylon/AISI 316L/1.4404 9910482Temperature probe Pt100 Class A, Ø 3 mm/length 250 mm Nylon/AISI 316L/1.4404 9910404Temperature probe Pt100 Class A, Ø 3 mm/length 300 mm Nylon/AISI 316L/1.4404 9910474Temperature probe Pt100 Class A, Ø 6 mm/length 100 mm Nylon/AISI 316L/1.4404 9910475Temperature probe Pt100 Class A, Ø 6 mm/length 150 mm Nylon/AISI 316L/1.4404 9910476Temperature probe Pt100 Class A, Ø 6 mm/length 200 mm Nylon/AISI 316L/1.4404 9910477Temperature probe Pt100 Class A, Ø 6 mm/length 300 mm Nylon/AISI 316L/1.4404 9910478Cable sensor Pt100 Class A, (4-wire) with stainless steel jacket Nylon/AISI 316L/1.4404 99104796 x 50 mm, 1 m cable with connector, 4-pin M12 x 1, hot moulded and water-tightCable sensor Pt100 Class A, (4-wire) with stainless steel jacket Nylon/AISI 316L/1.4404 99104806 x 50 mm, 2 m cable with connector, 4-pin M12 x 1, hot moulded and water-tightCable sensor Pt100 Class A, (4-wire) with stainless steel jacket Nylon/AISI 316L/1.4404 99104816 x 50 mm, 5 m cable with connector, 4-pin M12 x 1,hot moulded and water-tight
Pre
ferr
ed T
ypes
14 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com
TYPE CODEThe TURCK type code leaves no questions unanswered in the definition of the required item. All variants are specified simply and clearly.
THW G1/8 A4- - -3 L013
Thermowell
Insertion depth
MaterialA4 stainless steel AISI316L
14 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com
-Thermowell
For sensor diameter3 3 mm outer diameter6 6 mm outer diameter
Process connection G1/8 G1/8" male threadN1/8 1/8" NPT male threadG1/4 G1/4" male threadN1/4 1/4" NPT male threadG1/2 G1/2" male threadN1/2 1/2" NPT male threadTRI3/4 3/4" Tri-ClampDN25K DN25 hygienic fitting thread DIN 11851
Dimensional drawing Type Material WAK4-2-WAS4/S74 Connector: CuZn, TPU, Gold-plated contacts Seal: FPM (Viton) Cable: PUR
FB-WAK4-2-FB-WAS4/S2300 Connector: Stainless steel, PPH GF20, Gold-plated contacts Seal: FPM (Viton) Cable: PP WAK4-1-WAS4/S366/S367 Connector: CuZn, TPU, Gold-plated contacts Seal: FPM (Viton) Cable: PUR
CABLES
15 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com
CF M 3- - G1/8 A4
Compressing Fitting
15 /0406Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com
- -Compressionfitting
Material of the compression ringM AISI316L P PTFE
For probe diameter3 3 mm
6 6 mm
MaterialA4 stainless steel AISI 316L
Process connectionG1/8 G1/8" male threadN1/8 1/8" NPT male threadG1/4 G1/4" male threadN1/4 1/4" NPT male thread
Description Temperature Ident-No. range2 m connecting cable, IP67, robust, connector M12 x 1, Connector: 8006744PVC and halogen-free, top-quality PUR cable for the -30…90 °C automotive industry Cable: -50…105 °C
2 m connecting cable, IP67 and IP69K, Connector: 8034685connector M12 x 1, PP cable, -30…90 °Cflame-retardant acc. to DIN VDE 0472, part 804, type B Cable: -40…105 °C 1 m connecting cable, IP67, robust, connector M12 x 1, Connector: 8013782PVC and halogen-free top-quality PUR cable, 30…90 °Cflame-retardant acc. to DIN VDE 0472 part 804, type B Cable: -40…90 °C
Pre
ferr
ed T
ypes
16 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com16 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com
THERMOWELLS
Dimensional drawing Type Material THW-3-DN25K-A4-L050 AISI 316L/1.4404 THW-3-DN25K-A4-L100 AISI 316L/1.4404 THW-3-DN25K-A4-L150 AISI 316L/1.4404 THW-3-DN25K-A4-L250 AISI 316L/1.4404 THW-3-G1/2-A4-L050 AISI 316L/1.4404 THW-3-G1/2-A4-L100 AISI 316L/1.4404 THW-3-G1/2-A4-L150 AISI 316L/1.4404 THW-3-G1/2-A4-L250 AISI 316L/1.4404 THW-3-G1/4-A4-L050 AISI 316L/1.4404 THW-3-G1/4-A4-L100 AISI 316L/1.4404 THW-3-G1/4-A4-L150 AISI 316L/1.4404 THW-3-G1/4-A4-L200 AISI 316L/1.4404 THW-3-G1/8-A4-L050 AISI 316L/1.4404 THW-3-G1/8-A4-L100 AISI 316L/1.4404 THW-3-G1/8-A4-L150 AISI 316L/1.4404 THW-3-G1/8-A4-L200 AISI 316L/1.4404
17 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com 17 /0406Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com
Clearly readable display
The display with a large and easily visible 4-digit 7-segment display is tilted by an angle of 45°. Thus the display can be read from every position, even from a large distance. The unit of temperature is displayed permanently. All of these features guarantee a high degree of operational safety.
Description Ident-No Thermowell (external Ø 8 mm, probe tip Ø 4 mm), hygienic fitting DN25 9910455 acc. to DIN 11851 with compression fitting, for 3 mm probe, insertion depth 50 mm Thermowell (external Ø 8 mm, probe tip Ø 4 mm), hygienic fitting DN25 9910456acc. to DIN 11851 with compression fitting, for 3 mm probe, insertion depth 100 mmThermowell (external Ø 8 mm, probe tip Ø 4 mm), hygienic fitting DN25 9910457acc. to DIN 11851 with compression fitting, for 3 mm probe, insertion depth 150 mm Thermowell (external Ø 8 mm, probe tip Ø 4 mm), hygienic fitting DN25 9910458acc. to DIN 11851 with compression fitting, for 3 mm probe, insertion depth 250 mmThermowell, length 50 mm with G1/2" male thread and 9910443 compression fitting, for 3 mm probe Thermowell, length 100 mm with G1/2" male thread and 9910444compression fitting, for 3 mm probe Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 150 mm 9910445with G1/2" male thread and compression fitting, for 3 mm probe Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 250 mm 9910446 with G1/2" male thread and compression fitting, for 3 mm probe Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 50 mm with 9910415G1/4" male thread and compression fitting, for 3 mm probe Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 100 mm 9910419 with G1/4" male thread and compression fitting, for 3 mm probe Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 150 mm 9910423with G1/4" male thread and compression fitting (AISI316L), for 3 mm probeThermowell (external Ø 5 mm, internal Ø 3.5 mm) length 200 mm 9910427with G1/4" male thread and compression fitting, for 3 mm probe Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 50 mm 9910413 with G1/8" male thread and compression fitting, for 3 mm probe Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 100 mm 9910417 with G1/8" male thread and compression fitting (AISI316L), for 3 mm probe Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 150 mm 9910421with G1/8" male thread and compression fitting, for 3 mm probe Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 200 mm 9910425with G1/8" male thread and compression fitting, for 3 mm probe P
refe
rred
Typ
es
18 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com18 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com
Dimensional drawing Type Material THW-3-N1/2-A4-L050 AISI 316L/1.4404 THW-3-N1/2-A4-L100 AISI 316L/1.4404 THW-3-N1/2-A4-L150 AISI 316L/1.4404 THW-3-N1/2-A4-L250 AISI 316L/1.4404 THW-3-N1/4-A4-L050 AISI 316L/1.4404 THW-3-N1/4-A4-L100 AISI 316L/1.4404 THW-3-N1/4-A4-L150 AISI 316L/1.4404 THW-3-N1/4-A4-L200 AISI 316L/1.4404 THW-3-N1/8-A4-L050 AISI 316L/1.4404 THW-3-N1/8-A4-L100 AISI 316L/1.4404 THW-3-N1/8-A4-L150 AISI 316L/1.4404 THW-3-N1/8-A4-L200 AISI 316L/1.4404 THW-3-TRI3/4-A4-L035 AISI 316L/1.4404 THW-3-TRI3/4-A4-L050 AISI 316L/1.4404 THW-3-TRI3/4-A4-L100 AISI 316L/1.4404 THW-3-TRI3/4-A4-L150 AISI 316L/1.4404 THW-3-TRI3/4-A4-L250 AISI 316L/1.4404
THERMOWELLS
19 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com 19 /0406Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com
Description Ident-No. Thermowell (external Ø 5 mm, internal Ø 3.5 mm) length 50 mm 9910447with 1/2" NPT male thread and compression fitting, für 3 mm probeThermowell (external Ø 5 mm, internal Ø 3.5 mm) length 100 mm 9910448with 1/2" NPT male thread and compression fitting, für 3 mm probeThermowell (external Ø 5 mm, internal Ø 3.5 mm) length 150 mm 9910449 with 1/2" NPT male thread and compression fitting, für 3 mm probeThermowell (external Ø 5 mm, internal Ø 3.5 mm) length 250 mm 9910450with 1/2" NPT male thread and compression fitting, für 3 mm probeThermowell (external Ø 5 mm, internal Ø 3.5 mm) length 50 mm 9910416with 1/4" NPT male thread and compression fitting, für 3 mm probeThermowell (external Ø 5 mm, internal Ø 3.5 mm) length 100 mm with 99104201/4" NPT male thread and compression fitting (AISI316L), for 3 mm probeThermowell (external Ø 5 mm, internal Ø 3.5 mm) length 150 mm 9910424with 1/4" NPT male thread and compression fitting, für 3 mm probeThermowell (external Ø 5 mm, internal Ø 3.5 mm) length 200 mm 9910428with 1/4" NPT male thread and compression fitting, für 3 mm probeThermowell (external Ø 5 mm, internal Ø 3.5 mm) length 50 mm 9910414with 1/8" NPT male thread and compression fitting, für 3 mm probeThermowell (external Ø 5 mm, internal Ø 3.5 mm) length 100 mm 9910418with 1/8" NPT male thread and compression fitting, für 3 mm probeThermowell (external Ø 5 mm, internal Ø 3.5 mm) length 150 mm 9910422with 1/8" NPT male thread and compression fitting, für 3 mm probeThermowell (external Ø 5 mm, internal Ø 3.5 mm) length 200 mm 9910426with 1/8" NPT male thread and compression fitting, für 3 mm probeThermowell (external Ø 8 mm, probe tip Ø 4 mm), 3/4" Tri-Clamp 9910433with compression fitting, for 3 mm probe, insertion depth 35 mmThermowell (external Ø 8 mm, probe tip Ø 4 mm), 3/4" Tri-Clamp process connection 9910451with compression fitting, for 3 mm probe, insertion depth 50 mmThermowell (external Ø 8 mm, probe tip Ø 4 mm), 3/4" Tri-Clamp process connection 9910452with compression fitting, for 3 mm probe, insertion depth 100 mmThermowell (external Ø 8 mm, probe tip Ø 4 mm), 3/4" Tri-Clamp process connection 9910453 with compression fitting, for 3 mm probe, insertion depth 150 mmThermowell (external Ø 8 mm, probe tip Ø 4 mm), 3/4" Tri-Clamp process connection 9910454with compression fitting, for 3 mm probe, insertion depth 250 mm
Pre
ferr
ed T
ypes
Highest levels of operating comfort
The “Mode” and “Set” buttons can be operated by a fi nger. No special addi-tional tools are required in order to view the parameter values. Both buttons are used as the Up and Down keys in the user friendly programming menu. They are used to precisely set the required parameter values.
20 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com20 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com
Dimensional drawing Type Material
THW-6-DN25K-A4-L050 AISI 316L/1.4404 THW-6-DN25K-A4-L100 AISI 316L/1.4404 THW-6-DN25K-A4-L150 AISI 316L/1.4404 THW-6-DN25K-A4-L250 AISI 316L/1.4404 THW-6-G1/2-A4-L050 AISI 316L/1.4404 THW-6-G1/2-A4-L100 AISI 316L/1.4404 THW-6-G1/2-A4-L150 AISI 316L/1.4404 THW-6-G1/2-A4-L250 AISI 316L/1.4404 THW-6-N1/2-A4-L050 AISI 316L/1.4404 THW-6-N1/2-A4-L100 AISI 316L/1.4404 THW-6-N1/2-A4-L150 AISI 316L/1.4404 THW-6-N1/2-A4-L250 AISI 316L/1.4404 THW-6-TRI3/4-A4-L050 AISI 316L/1.4404 THW-6-TRI3/4-A4-L100 AISI 316L/1.4404 THW-6-TRI3/4-A4-L150 AISI 316L/1.4404 THW-6-TRI3/4-A4-L250 AISI 316L/1.4404
THERMOWELLS
21 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com 21 /0406Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com
Description Ident-No.
Thermowell, (external Ø 9 mm), hygienic fitting DN25 acc. to DIN 11851 9910471with compression fitting, for 6 mm probe, insertion depth 50 mmThermowell, (external Ø 9 mm), hygienic fitting DN25 acc. to DIN 11851 9910436with compression fitting, for 6 mm probe, insertion depth 100 mmThermowell, (external Ø 9 mm), hygienic fitting DN25 acc. to DIN 11851 9910472with compression fitting, for 6 mm probe, insertion depth 150 mmThermowell, (external Ø 9 mm), hygienic fitting DN25 acc. to DIN 11851 9910473with compression fitting, for 6 mm probe, insertion depth 250 mmThermowell, (external Ø 9 mm, internal Ø 7 mm), length 50 mm 9910459with G1/2" male thread and compression ferrule fitting, for 6 mm probeThermowell, (external Ø 9 mm, internal Ø 7 mm), length 100 mm 9910460with G1/2" male thread and compression ferrule fitting, for 6 mm probeThermowell, (external Ø 9 mm, internal Ø 7 mm), length 150 mm 9910461with G1/2" male thread and compression ferrule fitting, for 6 mm probeThermowell, (external Ø 9 mm, internal Ø 7 mm), length 250 mm 9910462with G1/2" male thread and compression ferrule fitting, for 6 mm probeThermowell, (external Ø 9 mm, internal Ø 7 mm), length 50 mm 9910463with 1/2" NPT male thread and compression ferrule fitting, for 6 mm probeThermowell, (external Ø 9 mm, internal Ø 7 mm), length 100 mm 9910464with 1/2" NPT male thread and compression ferrule fitting, for 6 mm probeThermowell, (external Ø 9 mm, internal Ø 7 mm), length 150 mm 9910465with G1/2" male thread and compression ferrule fitting, for 6 mm probeThermowell, (external Ø 9 mm, internal Ø 7 mm), length 250 mm 9910466with 1/2" NPT male thread and compression ferrule fitting, for 6 mm probeThermowell, (external Ø 9 mm), 3/4" Tri-Clamp with compression fitting, 9910467for 6 mm probe, insertion depth 50 mmThermowell, (external Ø 9 mm), 3/4" Tri-Clamp with compression fitting, 9910468for 6 mm probe, insertion depth100 mmThermowell, (external Ø 9 mm), 3/4" Tri-Clamp with compression fitting, 9910469 for 6 mm probe, insertion depth 150 mmThermowell, (external Ø 9 mm), 3/4" Tri-Clamp with compression fitting, 9910470for 6 mm probe, insertion depth 250 mm P
refe
rred
Typ
es
Maximum operational safety
Mineral insulated sensors feature a very high fl ectional elasticity.
22 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com22 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com
Dimensional drawing Type Material
CF-M-3-G1/4-A4 AISI 316L/1.4404 CF-M-3-G1/8-A4 AISI 316L/1.4404 CF-M-3-N1/4-A4 AISI 316L/1.4404 CF-M-3-N1/8-A4 AISI 316L/1.4404 CF-P-3-G1/4-A4 AISI 316L/1.4404 CF-P-3-G1/8-A4 AISI 316L/1.4404 CF-P-3-N1/4-A4 AISI 316L/1.4404 CF-P-3-N1/8-A4 AISI 316L/1.4404 CF-M-6-G1/4-A4 AISI 316L/1.4404 CF-M-6-N1/4-A4 AISI 316L/1.4404 CF-P-6-G1/4-A4 AISI 316L/1.4404 CF-P-6-N1/4-A4 AISI 316L/1.4404
COMPRESSION FITTINGS
23 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com 23 /0406Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com
Description Ident-No.
Threaded adapter G1/4" with metal compression fitting for direct 9910407mounting of 3 mm probes, max. temp. 350 °C, max. pressure 100 barThreaded adapter G1/8" with metal compression fitting for direct 9910405mounting of 3 mm probes, max. temp. 350 °C, max. pressure 100 barThreaded adapter 1/4" NPT with metal compression fitting for direct 9910408mounting of 3 mm probes, max. temp. 350 °C, max. pressure 100 barThreaded adapter 1/8" NPT with metal compression fitting for direct 9910406mounting of 3 mm probes, max. temp. 350 °C, max. pressure 100 barThreaded adapter G1/4" NPT with PTFE compression fitting for direct 9910411 mounting of 3 mm probes, max. temp. 100 °C, max. pressure 20 barThreaded adapter G1/8" NPT with PTFE compression fitting for direct 9910409mounting of 3 mm probes, max. temp. 100 °C, max. pressure 20 barThreaded adapter 1/4" NPT with PTFE compression fitting for direct 9910412mounting of 3 mm probes, max. temp. 100 °C, max. pressure 20 barThreaded adapter 1/8" NPT with PTFE compression fitting for direct 9910410 mounting of 3 mm probes, max. temp. 100 °C, max. pressure 20 barThreaded adapter G1/4" with metal compression fitting for direct 9910483mounting of 6 mm probes, max. temp. 350 °C, max. pressure 100 barThreaded adapter 1/4" NPT with metal compression fitting for direct 9910484mounting of 6 mm probes, max. temp. 350 °C, max. pressure 100 barThreaded adapter G1/4" with PTFE compression fitting for direct 9910485mounting of 6 mm probes, max. temp. 100 °C, max. pressure 20 barThreaded adapter 1/4" NPT with PTFE compression fitting for direct 9910486mounting of 6 mm probes, max. temp. 100 °C, max. pressure 20 bar
Pre
ferr
ed T
ypes
Mounting in 40 mm grid dimensions in compact space
With a housing diameter of just 34 mm multiple temperature sensors can be fi tted in tight spaces.
24 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Phone 0208 4952-0 • Fax 0208 4952-264 • www.turck.com24 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Pho
MAXIMUM OPERATING COMFORT WITH PROGRAMMING
One of the most important aspects with the selection of an intelligent temperature sensor is the level of user friendliness dur-ing programming. With the clear menu structure it is possible to set the values for the setting points, output function, analogue ranges and a whole range of special functions such as switch delays, rotation and display direction or peak temperature memory. Additional external devices such as a laptop or a special programming device are not required.
The temperature sensors of the TS400/500 series can be easily pro-grammed with three push buttons. Both the “Mode” and “Set” buttons which can be used to select and set different parameters, can be operated with fi ngers without tools.
It is possible to scroll up and down through the values for improved opera-tion. If the set value is to be saved and the programming is to be changed, the “Enter” button must be pressed. This button is recessed and can only be operated using a simple tool such as a ballpoint pen.
As long as the operator does not use a tool he can comfortably view all values and change them after a time lock has been overcome. Unintentional changes to the program are not a danger. Only after a tool is used can the operator perma-nently modify the sensor setting.
Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Phone 0208 4952-0 • Fax 0208 4952-264 • www.turck.com 25 /0406 Mülheim/Ruhr • Germany • Phone 0208 4952-0 • Fax 0208 4952-264 • www.turck.com 25 /0406
Schematic representation of the menu interface using a temperature sensor with 2 switching outputs as an example
!
!
"#$%&'"#$%&
"#$%&'"#$%&
!
"
#
#
(
(
(
(
(
(
(
(
(
(#)%*$+ %,-./
(#)%*$+ %,-./
$%
&
$%
&
!!
Robust design
The housing, the temperature connection and the electrical connection are made of stainless steel. The sensor features excellent electromagnetic compatibility (EMC).
26 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com26 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com
Power supply
Operating voltage 15...30 VDC (switching outputs) 18...30 VDC (switching and analogue output)
No-load current ≤ 50 mA
SELV, PELV according to EN 50178
Short-circuit protection yes
Reverse polarity protection yes
Insulation class III
Switching output
Switching frequency ≤ 180 Hz
Output function 2 x PNP or NPN, NC/NO programmable
Voltage drop at Ie ≤ 2 V
Rated operational current 0.2 A
Switching point distance 0.2 K
Switching point distance -49.8...+500 °C
Release points -50...+499.8 °C
Analogue current output
Current output 4...20 mA, 0...20 mA, 20...4 mA, 20...0 mA programmable
Response time < 100 ms
Load ≤ 0.5 kΩ
Analogue voltage output
Voltage output 0...10 V, 0...5 V, 1...6 V, 10...0 V, 5...0 V, 6...1 V programmable
Response time < 100 ms
Load ≥ 2 kΩ
Temperature sensor accuracy
Switching outputSwitching point accuracy ≤ ± 0.2 KRepetition accuracy ≤ ± 0.1 K
Analogue outputAccuracy (Lin.+Hys.+Rep.) ≤ ± 0.2 K
TECHNICAL DATA
Temperature sensor housing
Housing material Stainless-steel/plastic 1.4404 (AISI 316L)/PC
Electrical connection Connector M12 x 1, 4-pin with integrated high-speed connection technology
Sensor connection Connector M12 x 1, 4-pin
Coupling nut size SW 30 (max. 35 Nm)(with tightening torque)
Display
Temperature display 4-digit 7-segment display can be rotated by 180° and switched off
Switch state display 2 x LED yellow
Measured value/Programming Switch/release points; hysteresis/window mode; N.O./N.C.; unit of display; peak value memory
Display of temperature unit 4 x LED green (°C, °F, K, Ω)
EMC
EN 61000-4-2 ESD 4 kV CD / 8 kV AD
EN 61000-4-3 HF radiated: 15 V/m2
EN 61000-4-4 Burst 2 kV
EN 61000-4-5 Surge 1 kV, 42 Ω
EN 61000-4-6 HF conducted: 10 V
Ambient conditions
Medium temperature directly connected -50...+150 °C (otherwise see type code/ temperature sensor)
Ambient temperature -40...+80 °C
Storage temperature -40...+80 °C
Degree of protection IP67
Vibration resistance 20 g (10...2000 Hz) according to IEC 68-2-6
Shock resistance 50 x g (11 ms) according to IEC 68-2-27
27 /0406 Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com 27 /0406Hans Turck GmbH & Co.KG • Witzlebenstraße 7 • 45472 Mülheim/Ruhr • Germany • Tel. +49 (0) 208 4952-0 • Fax +49 (0) 208 4952-264 • www.turck.com
Standard probe
Temperature operating range -30…+500 °C ≤ 350 °C accuracy class A ≥ 350 °C accuracy class B
Ambient temperature -20…+90 °C
Measuring element Pt100, DIN EN 60751, Class A
Response time t0.5 = 1.5 s; t0.9 = 6.0 s in water at 0.2 m/s
Output function 4-wire
Reverse polarity protection Yes
Degree of protection IP67
Housing material Stainless-steel/plastic
Housing quality 1.4404 (AISI 316L) mineral insulated
Sensor material Stainless steel
Sensor quality 1.4404 (AISI 316L)
Pressure resistance 100 bar
Connection Connector, M12 x 1
Mechanical connection for compression fittings or thermowells
Compact probe
Temperature operating range -50…120 °C
Ambient temperature -20…90 °C
Measuring element Pt100, DIN EN 60751, Class A
Response time t0.5 = 1.5 s; t0.9 = 6.0 s in water at 0.2 m/s
Output function 4-wire
Reverse polarity protection Yes
Degree of protection IP67
Housing material Stainless-steel/plastic
Housing quality 1.4404 (AISI 316L) mineral insulated
Sensor material Stainless steel
Sensor quality 1.4404 (AISI 316L)
Pressure resistance 100 bar
Connection Connector, M12 x 1
Mechanical connection G1/8"
Special probe
Temperature operating range -50…120 °C
Ambient temperature -20…90 °C
Measuring element Pt100, DIN EN 60751, Class A
Response time t0.5 = 1.5 s; t0.9 = 6.0 s in water at 0.2 m/s
Output function 4-wire
Reverse polarity protection Yes
Degree of protection IP67
Housing material Stainless-steel/plastic
Housing quality 1.4404 (AISI 316L)
Sensor material Stainless-steel
Sensor quality 1.4404 (AISI 316L)
Pressure resistance 100 bar
Connection Connector, M12 x 1
Mechanical connection Tri-Clamp 3/4"; DN25 hygienic fitting according to DIN11851
Cable probe
Temperature operating range -50…+105 °C
Ambient temperature -20…+90 °C
Measuring element Pt100, DIN EN 60751, Class A
Response time t0.5 = 1.5 s; t0.9 = 6.0 s in water at 0.2 m/s
Output function 4-wire
Reverse polarity protection Yes
Degree of protection IP67
Housing material Plastic
Housing quality TPE (thermoplastic elastomer)
Sensor material Stainless steel
Sensor quality 1.4404 (AISI 316L)
Pressure resistance 100 bar
Connection Connector, M12 x 1
Mechanical connection for compression fittings, thermowells or for direct mounting
D10
1599
040
6
Hans Turck GmbH & Co. KG45472 Mülheim an der Ruhr, GermanyWitzlebenstraße 7Tel. +49 (0) 208 4952-0Fax +49 (0) 208 4952-264E-Mail [email protected] www.turck.com
The TURCK product database on the World Wide Web:Are you looking for a tailor-made solution for your application or for a special product? If you want to order or download catalogues, data sheets, manuals, software or confi guration fi les. Detailed and comprehensive information can be found on the Internet at www.turck.com
www.turck.com
INFORMATION – SERVICE & SUPPORT